test

- **PR Description**

The rebase.updateRefs feature of git is very useful to rebase a stack of
branches and keep everything nicely stacked; however, it is usually in
the way when you make a copy of a branch and want to rebase it "away"
from the original branch in some way or other. For example, the original
branch might sit on main, and you want to rebase the copy onto devel to
see if things still compile there. Or you want to do some heavy history
rewriting experiments on the copy, but keep the original branch in case
the experiments fail. Or you want to split a branch in two because it
contains two unrelated sets of changes; so you make a copy, and drop
half of the commits from the copy, then check out the original branch
and drop the other half of the commits from it.

In all these cases, git's updateRefs feature insists on moving the
original branch along with the copy in the first rebase that you make on
the copy. I think this is a bug in git, it should create update-ref
todos only for branches that point into the middle of your branch
(because only then do they form a stack), not when they point at the
head (because then it's a copy). I had a long discussion about this on
the git mailing list [1], but people either don't agree or don't care
enough.

So we fix this on our side: whenever we start a rebase for whatever
reason, be it interactive, non-interactive, or behind-the-scenes, we
drop any update-ref todos that are at the very top of the todo list,
which fixes all the above-mentioned scenarios nicely.

I will admit that there's one scenario where git's behavior is the
desired one, and the fix in this PR makes it worse: when you create a
new branch off of an existing one, with the intention of creating a
stack of branches, but before you make the first commit on the new
branch you realize some problem with the first branch (e.g. a commit
that needs to be reworded or dropped). It this case you do want both
branches to be affected by the change. In my experience this scenario is
much rarer than the other ones that I described above, and it's also
much easier to recover from: just check out the other branch again and
hard-reset it to the rebased one.

[1]
https://public-inbox.org/git/354f9fed-567f-42c8-9da9-148a5e223022@haller-berlin.de/

.editorconfig

@@ -0,0 +1,4 @@
+root = true
+
+[*.go]
+indent_style = tab

.github/pull_request_template.md

@@ -2,9 +2,14 @@
 
 - **Please check if the PR fulfills these requirements**
 
-* [ ] Cheatsheets are up-to-date (run `go run scripts/cheatsheet/main.go generate`)
+* [ ] Cheatsheets are up-to-date (run `go generate ./...`)
 * [ ] Code has been formatted (see [here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
 * [ ] Tests have been added/updated (see [here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md) for the integration test guide)
 * [ ] Text is internationalised (see [here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
 * [ ] Docs (specifically `docs/Config.md`) have been updated if necessary
 * [ ] You've read through your own file changes for silly mistakes etc
+
+<!--
+Be sure to name your PR with an imperative e.g. 'Add worktrees view'
+see https://github.com/jesseduffield/lazygit/releases/tag/v0.40.0 for examples
+-->

.github/workflows/cd.yml

@@ -14,11 +14,11 @@ jobs:
       - name: Unshallow repo
         run: git fetch --prune --unshallow
       - name: Setup Go
-        uses: actions/setup-go@v1
+        uses: actions/setup-go@v4
         with:
-          go-version: 1.20.x
+          go-version: 1.21.x
       - name: Run goreleaser
-        uses: goreleaser/goreleaser-action@v1
+        uses: goreleaser/goreleaser-action@v4
         with:
           distribution: goreleaser
           version: v1.17.2

.github/workflows/ci.yml

@@ -1,7 +1,7 @@
 name: Continuous Integration
 
 env:
-  GO_VERSION: 1.20
+  GO_VERSION: 1.21
 
 on:
   push:
@@ -30,22 +30,20 @@ jobs:
       - name: Checkout code
         uses: actions/checkout@v3
       - name: Setup Go
-        uses: actions/setup-go@v1
+        uses: actions/setup-go@v4
         with:
-          go-version: 1.20.x
-      - name: Cache build
-        uses: actions/cache@v3
-        with:
-          path: |
-            ${{matrix.cache_path}}
-            ~/go/pkg/mod
-          key: ${{runner.os}}-go-${{hashFiles('**/go.sum')}}-test
-          restore-keys: |
-            ${{runner.os}}-go-
+          go-version: 1.21.x
       - name: Test code
         # we're passing -short so that we skip the integration tests, which will be run in parallel below
         run: |
-          go test ./... -short
+          mkdir -p /tmp/code_coverage
+          go test ./... -short -cover -args "-test.gocoverdir=/tmp/code_coverage"
+      - name: Upload code coverage artifacts
+        uses: actions/upload-artifact@v3
+        with:
+          name: coverage-unit-${{ matrix.os }}-${{ github.run_id }}
+          path: /tmp/code_coverage
+
   integration-tests:
     strategy:
       fail-fast: false
@@ -89,23 +87,23 @@ jobs:
           path: ~/git-${{matrix.git-version}}
           key: ${{runner.os}}-git-${{matrix.git-version}}
       - name: Setup Go
-        uses: actions/setup-go@v1
+        uses: actions/setup-go@v4
         with:
-          go-version: 1.20.x
-      - name: Cache build
-        uses: actions/cache@v1
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/pkg/mod
-          key: ${{runner.os}}-go-${{hashFiles('**/go.sum')}}-test
-          restore-keys: |
-            ${{runner.os}}-go-
+          go-version: 1.21.x
       - name: Print git version
         run: git --version
       - name: Test code
+        env:
+          # See https://go.dev/blog/integration-test-coverage
+          LAZYGIT_GOCOVERDIR: /tmp/code_coverage
         run: |
+          mkdir -p /tmp/code_coverage
           ./scripts/run_integration_tests.sh
+      - name: Upload code coverage artifacts
+        uses: actions/upload-artifact@v3
+        with:
+          name: coverage-integration-${{ matrix.git-version }}-${{ github.run_id }}
+          path: /tmp/code_coverage
   build:
     runs-on: ubuntu-latest
     env:
@@ -115,18 +113,9 @@ jobs:
       - name: Checkout code
         uses: actions/checkout@v3
       - name: Setup Go
-        uses: actions/setup-go@v1
+        uses: actions/setup-go@v4
         with:
-          go-version: 1.20.x
-      - name: Cache build
-        uses: actions/cache@v1
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/pkg/mod
-          key: ${{runner.os}}-go-${{hashFiles('**/go.sum')}}-build
-          restore-keys: |
-            ${{runner.os}}-go-
+          go-version: 1.21.x
       - name: Build linux binary
         run: |
           GOOS=linux go build
@@ -151,29 +140,21 @@ jobs:
       - name: Checkout code
         uses: actions/checkout@v3
       - name: Setup Go
-        uses: actions/setup-go@v1
+        uses: actions/setup-go@v4
         with:
-          go-version: 1.20.x
-      - name: Cache build
-        uses: actions/cache@v1
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/pkg/mod
-          key: ${{runner.os}}-go-${{hashFiles('**/go.sum')}}-build
-          restore-keys: |
-            ${{runner.os}}-go-
-      - name: Check Cheatsheet
-        run: |
-          go run scripts/cheatsheet/main.go check
+          go-version: 1.21.x
       - name: Check Vendor Directory
         # ensure our vendor directory matches up with our go modules
         run: |
           go mod vendor && git diff --exit-code || (echo "Unexpected change to vendor directory. Run 'go mod vendor' locally and commit the changes" && exit 1)
-      - name: Check Integration Test List
-        # ensure our integration test list is up to date
+      - name: Check go.mod file
+        # ensure our go.mod file is clean
         run: |
-          go generate pkg/integration/tests/tests.go && git diff --exit-code || (echo "Integration test list not up to date. Run 'go generate pkg/integration/tests/tests.go' locally and commit the changes" && exit 1)
+          go mod tidy && git diff --exit-code || (echo "go.mod file is not clean. Run 'go mod tidy' locally and commit the changes" && exit 1)
+      - name: Check All Auto-Generated Files
+        # ensure all our auto-generated files are up to date
+        run: |
+          go generate ./... && git diff --quiet || (git status -s; echo "Auto-generated files not up to date. Run 'go generate ./...' locally and commit the changes" && exit 1)
         shell: bash # needed so that we get "-o pipefail"
       - name: Check Filenames
         run: scripts/check_filenames.sh
@@ -185,20 +166,11 @@ jobs:
       - name: Checkout code
         uses: actions/checkout@v3
       - name: Setup Go
-        uses: actions/setup-go@v1
+        uses: actions/setup-go@v4
         with:
-          go-version: 1.20.x
-      - name: Cache build
-        uses: actions/cache@v1
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/pkg/mod
-          key: ${{runner.os}}-go-${{hashFiles('**/go.sum')}}-test
-          restore-keys: |
-            ${{runner.os}}-go-
+          go-version: 1.21.x
       - name: Lint
-        uses: golangci/golangci-lint-action@v3.1.0
+        uses: golangci/golangci-lint-action@v3.7.0
         with:
           version: latest
       - name: errors
@@ -206,9 +178,38 @@ jobs:
         if: ${{ failure() }}
   check-required-label:
     runs-on: ubuntu-latest
+    if: github.ref != 'refs/heads/master'
     steps:
       - uses: mheap/github-action-required-labels@v5
         with:
           mode: exactly
           count: 1
           labels: "ignore-for-release, feature, enhancement, bug, maintenance, docs, i18n"
+  upload-coverage:
+    # List all jobs that produce coverage files
+    needs: [unit-tests, integration-tests]
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+
+      - name: Download all coverage artifacts
+        uses: actions/download-artifact@v3
+        with:
+          path: /tmp/code_coverage
+
+      - name: Combine coverage files
+        run: |
+          # Find all directories in /tmp/code_coverage and create a comma-separated list
+          COVERAGE_DIRS=$(find /tmp/code_coverage -mindepth 1 -maxdepth 1 -type d -printf '/tmp/code_coverage/%f,' | sed 's/,$//')
+          echo "Coverage directories: $COVERAGE_DIRS"
+          # Run the combine command with the generated list
+          go tool covdata textfmt -i=$COVERAGE_DIRS -o coverage.out
+          echo "Combined coverage:"
+          go tool cover -func coverage.out | tail -1 | awk '{print $3}'
+
+      - name: Upload to Codacy
+        run: |
+          CODACY_PROJECT_TOKEN=${{ secrets.CODACY_PROJECT_TOKEN }} \
+            bash <(curl -Ls https://coverage.codacy.com/get.sh) report \
+            --force-coverage-parser go -r coverage.out

.github/workflows/sponsors.yml

@@ -12,17 +12,17 @@ jobs:
         uses: actions/checkout@v3
 
       - name: Generate Sponsors 💖
-        uses: JamesIves/github-sponsors-readme-action@v1.0.8
+        uses: JamesIves/github-sponsors-readme-action@v1.2.2
         with:
           token: ${{ secrets.SPONSORS_TOKEN }}
-          file: 'README.md'
+          file: "README.md"
         if: ${{ github.repository == 'jesseduffield/lazygit' }}
 
-      - name: Commit and push if changed
-        run: |-
-          git diff
-          git config --global user.email "actions@users.noreply.github.com"
-          git config --global user.name "README-bot"
-          git add README.md
-          git commit -m "Updated README.md" || exit 0
-          git push
+      - name: Create Pull Request 🚀
+        uses: peter-evans/create-pull-request@v6
+        with:
+          commit-message: "README.md: Update Sponsors"
+          title: "README.md: Update Sponsors"
+          author: "github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>"
+          labels: "ignore-for-release"
+          delete-branch: true

.gitignore

@@ -6,9 +6,6 @@
 # Hidden
 .*
 
-# TODO
-TODO.*
-
 # Notes
 *.notes
 
@@ -35,10 +32,12 @@ lazygit.exe
 
 test/git_server/data
 
-test/results/**
+test/_results/**
 
 oryxBuildBinary
 __debug_bin
 
 .worktrees
 demo/output/*
+
+coverage.out

.golangci.yml

@@ -20,11 +20,15 @@ linters:
 linters-settings:
   exhaustive:
     default-signifies-exhaustive: true
-
+  staticcheck:
+    # SA1019 is for checking that we're not using fields marked as deprecated
+    # in a comment. It decides this in a loose way so I'm silencing it. Also because
+    # it's tripping on our own structs.
+    checks: ["all", "-SA1019"]
   nakedret:
     # the gods will judge me but I just don't like naked returns at all
     max-func-lines: 0
 
 run:
-  go: '1.20'
+  go: '1.21'
   timeout: 10m

.vscode/launch.json

@@ -7,11 +7,12 @@
       "request": "launch",
       "mode": "auto",
       "program": "main.go",
-      "args": ["--debug", "--use-config-file=${workspaceFolder}/.vscode/debugger_config.yml"],
+      "args": [
+        "--debug",
+        "--use-config-file=${workspaceFolder}/.vscode/debugger_config.yml"
+      ],
+      "hideSystemGoroutines": true,
       "console": "integratedTerminal",
-      "presentation": {
-        "hidden": true
-      }
     },
     {
       "name": "Tail Lazygit logs",
@@ -19,17 +20,41 @@
       "request": "launch",
       "mode": "auto",
       "program": "main.go",
-      "args": ["--logs", "--use-config-file=${workspaceFolder}/.vscode/debugger_config.yml"],
+      "args": [
+        "--logs",
+        "--use-config-file=${workspaceFolder}/.vscode/debugger_config.yml"
+      ],
       "console": "integratedTerminal",
-      "presentation": {
-        "hidden": true
-      }
-    }
+    },
+    {
+      "name": "Attach to a running Lazygit",
+      "type": "go",
+      "request": "attach",
+      "mode": "local",
+      "processId": "lazygit",
+      "hideSystemGoroutines": true,
+      "console": "integratedTerminal",
+    },
+    {
+      // To use this, first start an integration test with the "cli" runner and
+      // use the -debug option; e.g.
+      // $ make integration-test-cli -- -debug tag/reset.go
+      "name": "Attach to integration test runner",
+      "type": "go",
+      "request": "attach",
+      "mode": "local",
+      "processId": "test_lazygit",
+      "hideSystemGoroutines": true,
+      "console": "integratedTerminal",
+    },
   ],
   "compounds": [
     {
       "name": "Run with logs",
-      "configurations": ["Tail Lazygit logs", "Debug Lazygit"],
+      "configurations": [
+        "Tail Lazygit logs",
+        "Debug Lazygit"
+      ],
       "stopAll": true
     }
   ]

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+  "gopls": {
+    "formatting.gofumpt": true,
+  },
+}

CONTRIBUTING.md

@@ -10,6 +10,15 @@ before making a change.
 
 [This video](https://www.youtube.com/watch?v=kNavnhzZHtk) walks through the process of adding a small feature to lazygit. If you have no idea where to start, watching that video is a good first step.
 
+## Codebase guide
+
+[This doc](./docs/dev/Codebase_Guide.md) explains:
+* what the different packages in the codebase are for
+* where important files live
+* important concepts in the code
+* how the event loop works
+* other useful information
+
 ## All code changes happen through Pull Requests
 
 Pull requests are the best way to propose changes to the codebase. We actively
@@ -21,6 +30,8 @@ welcome your pull requests:
 4. Write a [good commit message](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html).
 5. Issue that pull request!
 
+Please do not raise pull request from your fork's master branch: make a feature branch instead. Lazygit maintainers will sometimes push changes to your branch when reviewing a PR and we often can't do this if you use your master branch.
+
 If you've never written Go in your life, then join the club! Lazygit was the maintainer's first Go program, and most contributors have never used Go before. Go is widely considered an easy-to-learn language, so if you're looking for an open source project to gain dev experience, you've come to the right place.
 
 ## Running in a VSCode dev container
@@ -97,6 +108,10 @@ To run gofumpt from your terminal go:
 go install mvdan.cc/gofumpt@latest && gofumpt -l -w .
 ```
 
+## Programming Font
+
+Lazygit supports [Nerd Fonts](https://www.nerdfonts.com) to render certain icons. Sometimes we use some of these icons verbatim in string literals in the code (mainly in tests), so you need to set your development environment to use a nerd font to see these.
+
 ## Internationalisation
 
 Boy that's a hard word to spell. Anyway, lazygit is translated into several languages within the pkg/i18n package. If you need to render text to the user, you should add a new field to the TranslationSet struct in `pkg/i18n/english.go` and add the actual content within the `EnglishTranslationSet()` method in the same file. Then you can access via `gui.Tr.YourNewText` (or `self.c.Tr.YourNewText`, etc). Although it is appreciated if you translate the text into other languages, it's not expected of you (google translate will likely do a bad job anyway!).

Dockerfile

@@ -2,7 +2,7 @@
 # docker build -t lazygit .
 # docker run -it lazygit:latest /bin/sh
 
-FROM golang:1.20 as build
+FROM golang:1.21 as build
 WORKDIR /go/src/github.com/jesseduffield/lazygit/
 COPY go.mod go.sum ./
 RUN go mod download

Makefile

@@ -0,0 +1,68 @@
+.PHONY: all
+all: build
+
+.PHONY: build
+build:
+	go build -gcflags='all=-N -l'
+
+.PHONY: install
+install:
+	go install
+
+.PHONY: run
+run: build
+	./lazygit
+
+# Run `make run-debug` in one terminal tab and `make print-log` in another to view the program and its log output side by side
+.PHONY: run-debug
+run-debug:
+	go run main.go -debug
+
+.PHONY: print-log
+print-log:
+	go run main.go --logs
+
+.PHONY: unit-test
+unit-test:
+	go test ./... -short
+
+.PHONY: test
+test: unit-test integration-test-all
+
+# Generate all our auto-generated files (test list, cheatsheets, maybe other things in the future)
+.PHONY: generate
+generate:
+	go generate ./...
+
+.PHONY: format
+format:
+	gofumpt -l -w .
+
+# For more details about integration test, see https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md.
+.PHONY: integration-test-tui
+integration-test-tui:
+	go run cmd/integration_test/main.go tui $(filter-out $@,$(MAKECMDGOALS))
+
+.PHONY: integration-test-cli
+integration-test-cli:
+	go run cmd/integration_test/main.go cli $(filter-out $@,$(MAKECMDGOALS))
+
+.PHONY: integration-test-all
+integration-test-all:
+	go test pkg/integration/clients/*.go
+
+.PHONY: bump-gocui
+bump-gocui:
+	scripts/bump_gocui.sh
+
+.PHONY: bump-lazycore
+bump-lazycore:
+	scripts/bump_lazycore.sh
+
+.PHONY: record-demo
+record-demo:
+	demo/record_demo.sh $(filter-out $@,$(MAKECMDGOALS))
+
+.PHONY: vendor
+vendor:
+	go mod vendor && go mod tidy

cmd/integration_test/main.go

@@ -16,7 +16,7 @@ Usage:
 		> go run cmd/integration_test/main.go cli [--slow] [--sandbox] <test1> <test2> ...
 	If you pass no test names, it runs all tests
 	Accepted environment variables:
-	KEY_PRESS_DELAY (e.g. 200): the number of milliseconds to wait between keypresses
+	INPUT_DELAY (e.g. 200): the number of milliseconds to wait between keypresses or mouse clicks
 
 	TUI mode:
 		> go run cmd/integration_test/main.go tui
@@ -26,6 +26,29 @@ Usage:
 		> go run cmd/integration_test/main.go help
 `
 
+type flagInfo struct {
+	name string // name of the flag; can be used with "-" or "--"
+	flag *bool  // a pointer to the variable that should be set to true when this flag is passed
+}
+
+// Takes the args that you want to parse (excluding the program name and any
+// subcommands), and returns the remaining args with the flags removed
+func parseFlags(args []string, flags []flagInfo) []string {
+outer:
+	for len(args) > 0 {
+		for _, f := range flags {
+			if args[0] == "-"+f.name || args[0] == "--"+f.name {
+				*f.flag = true
+				args = args[1:]
+				continue outer
+			}
+		}
+		break
+	}
+
+	return args
+}
+
 func main() {
 	if len(os.Args) < 2 {
 		log.Fatal(usage)
@@ -35,23 +58,26 @@ func main() {
 	case "help":
 		fmt.Println(usage)
 	case "cli":
-		testNames := os.Args[2:]
 		slow := false
 		sandbox := false
-		// get the next arg if it's --slow
-		if len(os.Args) > 2 {
-			if os.Args[2] == "--slow" || os.Args[2] == "-slow" {
-				testNames = os.Args[3:]
-				slow = true
-			} else if os.Args[2] == "--sandbox" || os.Args[2] == "-sandbox" {
-				testNames = os.Args[3:]
-				sandbox = true
-			}
-		}
-
-		clients.RunCLI(testNames, slow, sandbox)
+		waitForDebugger := false
+		raceDetector := false
+		testNames := parseFlags(os.Args[2:], []flagInfo{
+			{"slow", &slow},
+			{"sandbox", &sandbox},
+			{"debug", &waitForDebugger},
+			{"race", &raceDetector},
+		})
+		clients.RunCLI(testNames, slow, sandbox, waitForDebugger, raceDetector)
 	case "tui":
-		clients.RunTUI()
+		raceDetector := false
+		remainingArgs := parseFlags(os.Args[2:], []flagInfo{
+			{"race", &raceDetector},
+		})
+		if len(remainingArgs) > 0 {
+			log.Fatal("tui only supports the -race argument.")
+		}
+		clients.RunTUI(raceDetector)
 	default:
 		log.Fatal(usage)
 	}

demo/config.yml

@@ -75,7 +75,10 @@ cursorStyle: block
 # Font family
 # You can use any font that is installed on your machine
 # in CSS-like syntax
-fontFamily: "DejaVuSansMono Nerd Font"
+# Download from:
+# https://github.com/ryanoasis/nerd-fonts/releases/download/v3.0.2/DejaVuSansMono.zip
+# Not using the mono font because it makes icons too small.
+fontFamily: "DejaVuSansM Nerd Font"
 
 # The size of the font
 fontSize: 8

docs/Config.md

@@ -3,8 +3,8 @@
 Default path for the config file:
 
 - Linux: `~/.config/lazygit/config.yml`
-- MacOS: `~/Library/Application Support/lazygit/config.yml`
-- Windows: `%APPDATA%\lazygit\config.yml`
+- MacOS: `~/Library/Application\ Support/lazygit/config.yml`
+- Windows: `%LOCALAPPDATA%\lazygit\config.yml` (default location, but it will also be found in `%APPDATA%\lazygit\config.yml`
 
 For old installations (slightly embarrassing: I didn't realise at the time that you didn't need to supply a vendor name to the path so I just used my name):
 
@@ -16,6 +16,17 @@ If you want to change the config directory:
 
 - MacOS: `export XDG_CONFIG_HOME="$HOME/.config"`
 
+JSON schema is available for `config.yml` so that IntelliSense in Visual Studio Code (completion and error checking) is automatically enabled when the [YAML Red Hat][yaml] extension is installed. However, note that automatic schema detection only works if your config file is in one of the standard paths mentioned above. If you override the path to the file, you can still make IntelliSense work by adding
+
+```yaml
+# yaml-language-server: $schema=https://raw.githubusercontent.com/jesseduffield/lazygit/master/schema/config.json
+```
+
+to the top of your config file or via [Visual Studio Code settings.json config][settings].
+
+[yaml]: https://marketplace.visualstudio.com/items?itemName=redhat.vscode-yaml
+[settings]: https://github.com/redhat-developer/vscode-yaml#associating-a-schema-to-a-glob-pattern-via-yamlschemas
+
 ## Default
 
 ```yaml
@@ -24,10 +35,13 @@ gui:
   windowSize: 'normal' # one of 'normal' | 'half' | 'full' default is 'normal'
   scrollHeight: 2 # how many lines you scroll by
   scrollPastBottom: true # enable scrolling past the bottom
+  scrollOffMargin: 2 # how many lines to keep before/after the cursor when it reaches the top/bottom of the view; see 'Scroll-off Margin' section below
+  scrollOffBehavior: 'margin' # one of 'margin' | 'jump'; see 'Scroll-off Margin' section below
   sidePanelWidth: 0.3333 # number from 0 to 1
   expandFocusedSidePanel: false
   mainPanelSplitMode: 'flexible' # one of 'horizontal' | 'flexible' | 'vertical'
-  language: 'auto' # one of 'auto' | 'en' | 'zh' | 'pl' | 'nl' | 'ja' | 'ko' | 'ru'
+  enlargedSideViewLocation: 'left' # one of 'left' | 'top'
+  language: 'auto' # one of 'auto' | 'en' | 'zh-CN' | 'zh-TW' | 'pl' | 'nl' | 'ja' | 'ko' | 'ru'
   timeFormat: '02 Jan 06' # https://pkg.go.dev/time#Time.Format
   shortTimeFormat: '3:04PM'
   theme:
@@ -43,8 +57,6 @@ gui:
       - blue
     selectedLineBgColor:
       - blue # set to `default` to have no background colour
-    selectedRangeBgColor:
-      - blue
     cherryPickedCommitBgColor:
       - cyan
     cherryPickedCommitFgColor:
@@ -63,20 +75,30 @@ gui:
   showRandomTip: true
   showBranchCommitHash: false # show commit hashes alongside branch names
   showBottomLine: true # for hiding the bottom information line (unless it has important information to tell you)
+  showPanelJumps: true # for showing the jump-to-panel keybindings as panel subtitles
   showCommandLog: true
   showIcons: false # deprecated: use nerdFontsVersion instead
   nerdFontsVersion: "" # nerd fonts version to use ("2" or "3"); empty means don't show nerd font icons
+  showFileIcons: true # for hiding file icons in the file views
   commandLogSize: 8
   splitDiff: 'auto' # one of 'auto' | 'always'
   skipRewordInEditorWarning: false # for skipping the confirmation before launching the reword editor
-  border: 'single' # one of 'single' | 'double' | 'rounded' | 'hidden'
+  border: 'rounded' # one of 'single' | 'double' | 'rounded' | 'hidden'
   animateExplosion: true # shows an explosion animation when nuking the working tree
+  portraitMode: 'auto' # one of 'auto' | 'never' | 'always'
+  filterMode: 'substring' # one of 'substring' | 'fuzzy'; see 'Filtering' section below
+  spinner:
+    frames: ['|', '/', '-', '\\']
+    rate: 50 # spinner rate in milliseconds
+  statusPanelView: 'dashboard' # one of 'dashboard' | 'allBranchesLog'
 git:
   paging:
     colorArg: always
     useConfig: false
   commit:
     signOff: false
+    autoWrapCommitMessage: true # automatic WYSIWYG wrapping of the commit message as you type
+    autoWrapWidth: 72 # if autoWrapCommitMessage is true, the width to wrap to
   merging:
     # only applicable to unix users
     manualCommit: false
@@ -86,10 +108,14 @@ git:
     # one of date-order, author-date-order, topo-order or default.
     # topo-order makes it easier to read the git log graph, but commits may not
     # appear chronologically. See https://git-scm.com/docs/git-log#_commit_ordering
+    #
+    # Deprecated: Configure this with `Log menu -> Commit sort order` (<c-l> in the commits window by default).
     order: 'topo-order'
     # one of always, never, when-maximised
     # this determines whether the git graph is rendered in the commits panel
-    showGraph: 'when-maximised'
+    #
+    # Deprecated: Configure this with `Log menu -> Show git graph` (<c-l> in the commits window by default).
+    showGraph: 'always'
     # displays the whole git graph by default in the commits panel (equivalent to passing the `--all` argument to `git log`)
     showWholeGraph: false
   skipHookPrefix: WIP
@@ -104,7 +130,7 @@ git:
   overrideGpg: false # prevents lazygit from spawning a separate process when using GPG
   disableForcePushing: false
   parseEmoji: false
-  diffContextSize: 3 # how many lines of context are shown around a change in diffs
+  truncateCopiedCommitHashesTo: 12 # When copying commit hashes to the clipboard, truncate them to this length. Set to 40 to disable truncation.
 os:
   copyToClipboardCmd: '' # See 'Custom Command for Copying to Clipboard' section
   editPreset: '' # see 'Configuring File Editing' section
@@ -149,7 +175,7 @@ keybinding:
     jumpToBlock: ['1', '2', '3', '4', '5'] # goto the Nth block / panel
     nextMatch: 'n'
     prevMatch: 'N'
-    optionMenu: null # show help menu
+    optionMenu: <disabled> # show help menu
     optionMenu-alt1: '?' # show help menu
     select: '<space>'
     goInto: '<enter>'
@@ -186,6 +212,9 @@ keybinding:
     toggleWhitespaceInDiffView: '<c-w>'
     increaseContextInDiffView: '}'
     decreaseContextInDiffView: '{'
+    toggleRangeSelect: 'v'
+    rangeSelectUp: '<s-up>'
+    rangeSelectDown: '<s-down>'
   status:
     checkForUpdate: 'u'
     recentRepos: '<enter>'
@@ -194,6 +223,8 @@ keybinding:
     commitChangesWithoutHook: 'w' # commit changes without pre-commit hook
     amendLastCommit: 'A'
     commitChangesWithEditor: 'C'
+    findBaseCommitForFixup: '<c-f>'
+    confirmDiscard: 'x'
     ignoreFile: 'i'
     refreshFiles: 'r'
     stashAllChanges: 's'
@@ -229,11 +260,11 @@ keybinding:
     moveDownCommit: '<c-j>' # move commit down one
     moveUpCommit: '<c-k>' # move commit up one
     amendToCommit: 'A'
+    amendAttributeMenu: 'a'
     pickCommit: 'p' # pick commit (when mid-rebase)
     revertCommit: 't'
-    cherryPickCopy: 'c'
-    cherryPickCopyRange: 'C'
-    pasteCommits: 'v'
+    cherryPickCopy: 'C'
+    pasteCommits: 'V'
     tagCommit: 'T'
     checkoutCommit: '<space>'
     resetCherryPick: '<c-R>'
@@ -246,14 +277,18 @@ keybinding:
   commitFiles:
     checkoutCommitFile: 'c'
   main:
-    toggleDragSelect: 'v'
-    toggleDragSelect-alt: 'V'
     toggleSelectHunk: 'a'
     pickBothHunks: 'b'
   submodules:
     init: 'i'
     update: 'u'
     bulkMenu: 'b'
+  commitMessage:
+    commitMenu: '<c-o>'
+  amendAttribute:
+    addCoAuthor: 'c'
+    resetAuthor: 'a'
+    setAuthor: 'A'
 ```
 
 ## Platform Defaults
@@ -279,7 +314,7 @@ os:
   open: 'open {{filename}}'
 ```
 
-### Custom Command for Copying to Clipboard
+## Custom Command for Copying to Clipboard
 ```yaml
 os:
   copyToClipboardCmd: ''
@@ -293,29 +328,22 @@ os:
 ```
 
 
-### Configuring File Editing
+## Configuring File Editing
 
-There are two commands for opening files, `o` for "open" and `e` for "edit". `o`
-acts as if the file was double-clicked in the Finder/Explorer, so it also works
-for non-text files, whereas `e` opens the file in an editor. `e` can also jump
-to the right line in the file if you invoke it from the staging panel, for
-example.
+There are two commands for opening files, `o` for "open" and `e` for "edit". `o` acts as if the file was double-clicked in the Finder/Explorer, so it also works for non-text files, whereas `e` opens the file in an editor. `e` can also jump to the right line in the file if you invoke it from the staging panel, for example.
 
-To tell lazygit which editor to use for the `e` command, the easiest way to do
-that is to provide an editPreset config, e.g.
+To tell lazygit which editor to use for the `e` command, the easiest way to do that is to provide an editPreset config, e.g.
 
 ```yaml
 os:
   editPreset: 'vscode'
 ```
 
-Supported presets are `vim`, `nvim`, `emacs`, `nano`, `vscode`, `sublime`, `bbedit`,
-`kakoune`, `helix`, and `xcode`. In many cases lazygit will be able to guess the right preset
-from your $(git config core.editor), or an environment variable such as $VISUAL or $EDITOR.
+Supported presets are `vim`, `nvim`, `nvim-remote`, `lvim`, `emacs`, `nano`, `micro`, `vscode`, `sublime`, `bbedit`, `kakoune`, `helix`, and `xcode`. In many cases lazygit will be able to guess the right preset from your $(git config core.editor), or an environment variable such as $VISUAL or $EDITOR.
 
-If for some reason you are not happy with the default commands from a preset, or
-there simply is no preset for your editor, you can customize the commands by
-setting the `edit`, `editAtLine`, and `editAtLineAndWait` options, e.g.:
+`nvim-remote` is an experimental preset for when you have invoked lazygit from within a neovim process, allowing lazygit to open the file from within the parent process rather than spawning a new one.
+
+If for some reason you are not happy with the default commands from a preset, or there simply is no preset for your editor, you can customize the commands by setting the `edit`, `editAtLine`, and `editAtLineAndWait` options, e.g.:
 
 ```yaml
 os:
@@ -326,13 +354,11 @@ os:
   openDirInEditor: 'myeditor {{dir}}'
 ```
 
-The `editInTerminal` option is used to decide whether lazygit needs to suspend
-itself to the background before calling the editor.
+The `editInTerminal` option is used to decide whether lazygit needs to suspend itself to the background before calling the editor. It should really be named `suspend` because for some cases like when lazygit is opened from within a neovim session and you're using the `nvim-remote` preset, you're technically still in a terminal. Nonetheless we're sticking with the name `editInTerminal` for backwards compatibility.
 
-Contributions of new editor presets are welcome; see the `getPreset` function in
-[`editor_presets.go`](https://github.com/jesseduffield/lazygit/blob/master/pkg/config/editor_presets.go).
+Contributions of new editor presets are welcome; see the `getPreset` function in [`editor_presets.go`](https://github.com/jesseduffield/lazygit/blob/master/pkg/config/editor_presets.go).
 
-### Overriding default config file location
+## Overriding default config file location
 
 To override the default config directory, use `CONFIG_DIR="$HOME/.config/lazygit"`. This directory contains the config file in addition to some other files lazygit uses to keep track of state across sessions.
 
@@ -346,6 +372,20 @@ or
 LG_CONFIG_FILE="$HOME/.base_lg_conf,$HOME/.light_theme_lg_conf" lazygit
 ```
 
+## Scroll-off Margin
+
+When the selected line gets close to the bottom of the window and you hit down-arrow, there's a feature called "scroll-off margin" that lets the view scroll a little earlier so that you can see a bit of what's coming in the direction that you are moving. This is controlled by the `gui.scrollOffMargin` setting (default: 2), so it keeps 2 lines below the selection visible as you scroll down. It can be set to 0 to scroll only when the selection reaches the bottom of the window.
+
+That's the behavior when `gui.scrollOffBehavior` is set to "margin" (the default). If you set `gui.scrollOffBehavior` to "jump", then upon reaching the last line of a view and hitting down-arrow the view will scroll by half a page so that the selection ends up in the middle of the view. This may feel a little jarring because the cursor jumps around when continuously moving down, but it has the advantage that the view doesn't scroll as often.
+
+This setting applies both to all list views (e.g. commits and branches etc), and to the staging view.
+
+## Filtering
+
+We have two ways to filter things, substring matching (the default) and fuzzy searching. With substring matching, the text you enter gets searched for verbatim (usually case-insensitive, except when your filter string contains uppercase letters, in which case we search case-sensitively). You can search for multiple non-contiguous substrings by separating them with spaces; for example, "int test" will match "integration-testing". All substrings have to match, but not necessarily in the given order.
+
+Fuzzy searching is smarter in that it allows every letter of the filter string to match anywhere in the text (only in order though), assigning a weight to the quality of the match and sorting by that order. This has the advantage that it allows typing "clt" to match "commit_loader_test" (letters at the beginning of subwords get more weight); but it has the disadvantage that it tends to return lots of irrelevant results, especially with short filter strings.
+
 ## Color Attributes
 
 For color attributes you can choose an array of attributes (with max one color attribute)
@@ -373,15 +413,13 @@ The available attributes are:
 
 ## Highlighting the selected line
 
-If you don't like the default behaviour of highlighting the selected line with a blue background, you can use the `selectedLineBgColor` and `selectedRangeBgColor` keys to customise the behaviour. If you just want to embolden the selected line (this was the original default), you can do the following:
+If you don't like the default behaviour of highlighting the selected line with a blue background, you can use the `selectedLineBgColor` key to customise the behaviour. If you just want to embolden the selected line (this was the original default), you can do the following:
 
 ```yaml
 gui:
   theme:
     selectedLineBgColor:
       - default
-    selectedRangeBgColor:
-      - default
 ```
 
 You can also use the reverse attribute like so:
@@ -391,8 +429,6 @@ gui:
   theme:
     selectedLineBgColor:
       - reverse
-    selectedRangeBgColor:
-      - reverse
 ```
 
 ## Custom Author Color
@@ -442,19 +478,18 @@ gui:
   nerdFontsVersion: "3"
 ```
 
-Supported versions are "2" and "3". The deprecated config `showIcons` sets the
-version to "2" for backwards compatibility.
+Supported versions are "2" and "3". The deprecated config `showIcons` sets the version to "2" for backwards compatibility.
 
 ## Keybindings
 
 For all possible keybinding options, check [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md)
 
-You can disable certain key bindings by specifying `null`.
+You can disable certain key bindings by specifying `<disabled>`.
 
 ```yaml
 keybinding:
   universal:
-    edit: null # disable 'edit file'
+    edit: <disabled> # disable 'edit file'
 ```
 
 ### Example Keybindings For Colemak Users
@@ -491,9 +526,7 @@ keybinding:
 
 ## Custom pull request URLs
 
-Some git provider setups (e.g. on-premises GitLab) can have distinct URLs for git-related calls and
-the web interface/API itself. To work with those, Lazygit needs to know where it needs to create
-the pull request. You can do so on your `config.yml` file using the following syntax:
+Some git provider setups (e.g. on-premises GitLab) can have distinct URLs for git-related calls and the web interface/API itself. To work with those, Lazygit needs to know where it needs to create the pull request. You can do so on your `config.yml` file using the following syntax:
 
 ```yaml
 services:
@@ -508,8 +541,7 @@ Where:
 
 ## Predefined commit message prefix
 
-In situations where certain naming pattern is used for branches and commits, pattern can be used to populate
-commit message with prefix that is parsed from the branch name.
+In situations where certain naming pattern is used for branches and commits, pattern can be used to populate commit message with prefix that is parsed from the branch name.
 
 Example:
 
@@ -539,9 +571,7 @@ Result:
 
 ## Launching not in a repository behaviour
 
-By default, when launching lazygit from a directory that is not a repository,
-you will be prompted to choose if you would like to initialize a repo. You can
-override this behaviour in the config with one of the following:
+By default, when launching lazygit from a directory that is not a repository, you will be prompted to choose if you would like to initialize a repo. You can override this behaviour in the config with one of the following:
 
 ```yaml
 # for default prompting behaviour

docs/Custom_Command_Keybindings.md

@@ -6,7 +6,7 @@ You can add custom command keybindings in your config.yml (accessible by pressin
 customCommands:
   - key: '<c-r>'
     context: 'commits'
-    command: 'hub browse -- "commit/{{.SelectedLocalCommit.Sha}}"'
+    command: 'hub browse -- "commit/{{.SelectedLocalCommit.Hash}}"'
   - key: 'a'
     context: 'files'
     command: "git {{if .SelectedFile.HasUnstagedChanges}} add {{else}} reset {{end}} {{.SelectedFile.Name | quote}}"
@@ -305,7 +305,7 @@ SelectedWorktree
 CheckedOutBranch
 ```
 
-To see what fields are available on e.g. the `SelectedFile`, see [here](https://github.com/jesseduffield/lazygit/blob/master/pkg/commands/models/file.go) (all the modelling lives in the same directory). Note that the custom commands feature does not guarantee backwards compatibility (until we hit Lazygit version 1.0 of course) which means a field you're accessing on an object may no longer be available from one release to the next. Typically however, all you'll need is `{{.SelectedFile.Name}}`, `{{.SelectedLocalCommit.Sha}}` and `{{.SelectedLocalBranch.Name}}`. In the future we will likely introduce a tighter interface that exposes a limited set of fields for each model.
+To see what fields are available on e.g. the `SelectedFile`, see [here](https://github.com/jesseduffield/lazygit/blob/master/pkg/commands/models/file.go) (all the modelling lives in the same directory). Note that the custom commands feature does not guarantee backwards compatibility (until we hit Lazygit version 1.0 of course) which means a field you're accessing on an object may no longer be available from one release to the next. Typically however, all you'll need is `{{.SelectedFile.Name}}`, `{{.SelectedLocalCommit.Hash}}` and `{{.SelectedLocalBranch.Name}}`. In the future we will likely introduce a tighter interface that exposes a limited set of fields for each model.
 
 ## Keybinding collisions
 

docs/Custom_Pagers.md

@@ -1,6 +1,6 @@
 # Custom Pagers
 
-Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `o` in the Status panel).
+Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `e` in the Status panel).
 
 Support does not extend to Windows users, because we're making use of a package which doesn't have Windows support.
 
@@ -62,3 +62,25 @@ git:
 ```
 
 If you set `useConfig: true`, lazygit will use whatever pager is specified in `$GIT_PAGER`, `$PAGER`, or your *git config*. If the pager ends with something like ` | less` we will strip that part out, because less doesn't play nice with our rendering approach. If the custom pager uses less under the hood, that will also break rendering (hence the `--paging=never` flag for the `delta` pager).
+
+## Using external diff commands
+
+Some diff tools can't work as a simple pager like the ones above do, because they need access to the entire diff, so just post-processing git's diff is not enough for them. The most notable example is probably [difftastic](https://difftastic.wilfred.me.uk).
+
+These can be used in lazygit by using the `externalDiffCommand` config; in the case of difftastic, that could be
+
+```yaml
+git:
+  paging:
+    externalDiffCommand: difft --color=always
+```
+
+The `colorArg`, `pager`, and `useConfig` options are not used in this case.
+
+You can add whatever extra arguments you prefer for your difftool; for instance
+
+```yaml
+git:
+  paging:
+    externalDiffCommand: difft --color=always --display=inline --syntax-highlight=off
+```

docs/Fixup_Commits.md

@@ -0,0 +1,77 @@
+# Fixup Commits
+
+## Background
+
+There's this common scenario that you have a PR in review, the reviewer is
+requesting some changes, and you make those changes and would normally simply
+squash them into the original commit that they came from. If you do that,
+however, there's no way for the reviewer to see what you changed. You could just
+make a separate commit with those changes at the end of the branch, but this is
+not ideal because it results in a git history that is not very clean.
+
+To help with this, git has a concept of fixup commits: you do make a separate
+commit, but the subject of this commit is the string "fixup! " followed by the
+original commit subject. This both tells the reviewer what's going on (you are
+making a change that you later will squash into the designated commit), and it
+provides an easy way to actually perform this squash operation when you are
+ready to do that (before merging).
+
+## Creating fixup commits
+
+You could of course create fixup commits manually by typing in the commit
+message with the prefix yourself. But lazygit has an easier way to do that:
+in the Commits view, select the commit that you want to create a fixup for, and
+press shift-F (for "Create fixup commit for this commit"). This automatically
+creates a commit with the appropriate subject line.
+
+Don't confuse this with the lowercase "f" command ("Fixup commit"); that one
+squashes the selected commit into its parent, this is not what we want here.
+
+## Creating amend commits
+
+There's a special type of fixup commit that uses "amend!" instead of "fixup!" in
+the commit message subject; in addition to fixing up the original commit with
+changes it allows you to also (or only) change the commit message of the
+original commit. The menu that appears when pressing shift-F has options for
+both of these; they bring up a commit message panel similar to when you reword a
+commit, but then create the "amend!" commit containing the new message. Note
+that in that panel you only type the new message as you want it to be
+eventually; lazygit then takes care of formatting the "amend!" commit
+appropriately for you (with the subject of your new message moving into the body
+of the "amend!" commit).
+
+## Squashing fixup commits
+
+When you're ready to merge the branch and want to squash all these fixup commits
+that you created, that's very easy to do: select the first commit of your branch
+and hit shift-S (for "Squash all 'fixup!' commits above selected commit
+(autosquash)"). Boom, done.
+
+## Finding the commit to create a fixup for
+
+When you are making changes to code that you changed earlier in a long branch,
+it can be tedious to find the commit to squash it into. Lazygit has a command to
+help you with this, too: in the Files view, press ctrl-f to select the right
+base commit in the Commits view automatically. From there, you can either press
+shift-F to create a fixup commit for it, or shift-A to amend your changes into
+the commit if you haven't published your branch yet.
+
+This command works in many cases, and when it does it almost feels like magic,
+but it's important to understand its limitations because it doesn't always work.
+The way it works is that it looks at the deleted lines of your current
+modifications, blames them to find out which commit those lines come from, and
+if they all come from the same commit, it selects it. So here are cases where it
+doesn't work:
+
+- Your current diff has only added lines, but no deleted lines. In this case
+  there's no way for lazygit to know which commit you want to add them to.
+- The deleted lines belong to multiple different commits. In this case you can
+  help lazygit by staging a set of files or hunks that all belong to the same
+  commit; if some changes are staged, the ctrl-f command works only on those.
+- The found commit is already on master; in this case, lazygit refuses to select
+  it, because it doesn't make sense to create fixups for it, let alone amend to
+  it.
+
+To sum it up: the command works great if you are changing code again that you
+changed or added earlier in the same branch. This is a common enough case to
+make the command useful.

docs/README.md

@@ -3,8 +3,9 @@
 * [Configuration](./Config.md).
 * [Custom Commands](./Custom_Command_Keybindings.md)
 * [Custom Pagers](./Custom_Pagers.md)
+* [Dev docs](./dev)
 * [Keybindings](./keybindings)
 * [Undo/Redo](./Undoing.md)
+* [Range Select](./Range_Select.md)
 * [Searching/Filtering](./Searching.md)
 * [Stacked Branches](./Stacked_Branches.md)
-* [Dev docs](./dev)

docs/Range_Select.md

@@ -0,0 +1,14 @@
+# Range Select
+
+Some actions can be performed on a range of contiguous items. For example:
+* staging multiple files at once
+* squashing multiple commits at once
+* copying (for cherry-pick) multiple commits at once
+
+There are two ways to select a range of items:
+1. Sticky range select: Press 'v' to toggle range select, then expand the selection using the up/down arrow key. To reset the selection, press 'v' again.
+2. Non-sticky range select: Press shift+up or shift+down to expand the selection. To reset the selection, press up/down without shift.
+
+The sticky option will be more familiar to vim users, and the second option will feel more natural to users who aren't used to doing things in a modal way.
+
+In order to perform an action on a range of items, simply press the normal key for that action. If the action only works on individual items, it will raise an error. This is a new feature and the plan is to incrementally support range select for more and more actions. If there is an action you would like to support range select which currently does not, please raise an issue in the repo.

docs/Stacked_Branches.md

@@ -7,7 +7,7 @@ refactorings, one for backend changes, and one for frontend changes. Those
 branches would then all be stacked onto each other.
 
 Git has support for rebasing such a stack as a whole; you can enable it by
-setting the git config `rebase.updateRfs` to true. If you then rebase the
+setting the git config `rebase.updateRefs` to true. If you then rebase the
 topmost branch of the stack, the other ones in the stack will follow. This
 includes interactive rebases, so for example amending a commit in the first
 branch of the stack will "just work" in the sense that it keeps the other

docs/Undoing.md

@@ -1,9 +1,9 @@
 # Undo/Redo in lazygit
 
-![Gif](../../assets/undo2.gif)
+You can undo the last action by pressing 'z' and redo with `ctrl+z`. Here we drop a couple of commits and then undo the actions.
+Undo uses the reflog which is specific to commits and branches so we can't undo changes to the working tree or stash.
 
-## Keybindings:
-'z' to undo, 'ctrl+z' to redo
+![undo](../../assets/demo/undo-compressed.gif)
 
 ## How it works
 

docs/dev/Busy.md

@@ -57,7 +57,7 @@ go utils.Safe(f)
 
 Where `utils.Safe` is a helper function that ensures we clean up the gui if the goroutine panics.
 
-### Programmatically enqueing a UI event
+### Programmatically enqueueing a UI event
 
 This is invoked with `self.c.OnUIThread(f)`. Internally, it creates a task before enqueuing the function as an event (including the task in the event struct) and once that event is processed by the event queue (and any other pending events are processed) the task is removed from the map by calling `task.Done()`.
 

docs/dev/Codebase_Guide.md

@@ -0,0 +1,94 @@
+# Lazygit Codebase Guide
+
+## Packages
+
+* `pkg/app`: Contains startup code, inititalises a bunch of stuff like logging, the user config, etc, before starting the gui. Catches and handles some errors that the gui raises.
+* `pkg/app/daemon`: Contains code relating to the lazygit daemon. This could be better named: it's is not a daemon in the sense that it's a long-running background process; rather it's a short-lived background process that we pass to git for certain tasks, like GIT_EDITOR for when we want to set the TODO file for an interactive rebase.
+* `pkg/cheatsheet`: Generates the keybinding cheatsheets in `docs/keybindings`.
+* `pkg/commands/git_commands`: All communication to the git binary happens here. So for example there's a `Checkout` method which calls `git checkout`.
+* `pkg/commands/oscommands`: Contains code for talking to the OS, and for invoking commands in general
+* `pkg/commands/git_config`: Reading of the git config all happens here.
+* `pkg/commands/hosting_service`: Contains code that is specific to git hosting services (aka forges).
+* `pkg/commands/models`: Contains model structs that represent commits, branches, files, etc.
+* `pkg/commands/patch`: Contains code for parsing and working with git patches
+* `pkg/common`: Contains the `Common` struct which holds common dependencies like the logger, i18n, and the user config. Most structs in the code will have a field named `c` which holds a common struct (or a derivative of the common struct).
+* `pkg/config`: Contains code relating to the Lazygit user config. Specifically `pkg/config/user_config/go` defines the user config struct and its default values.
+* `pkg/constants`: Contains some constant strings (e.g. links to docs)
+* `pkg/env`: Contains code relating to setting/getting environment variables
+* `pkg/i18n`: Contains internationalised strings
+* `pkg/integration`: Contains end-to-end tests
+* `pkg/jsonschema`: Contains generator for user config JSON schema.
+* `pkg/logs`: Contains code for instantiating the logger and for tailing the logs via `lazygit --logs`
+* `pkg/tasks`: Contains code for running asynchronous tasks: mostly related to efficiently rendering command output to the main window.
+* `pkg/theme`: Contains code related to colour themes.
+* `pkg/updates`: Contains code related to Lazygit updates (checking for update, download and installing the update)
+* `pkg/utils`: Contains lots of low-level helper functions
+* `pkg/gui`: Contains code related to the gui. We've still got a God Struct in the form of our Gui struct, but over time code has been moved out into contexts, controllers, and helpers, and we intend to continue moving more code out over time.
+* `pkg/gui/context`: Contains code relating to contexts. There is a context for each view e.g. a branches context, a tags context, etc. Contexts manage state related to the view and receive keypresses.
+* `pkg/gui/controllers`: Contains code relating to controllers. Controllers define a list of keybindings and their associated handlers. One controller can be assigned to multiple contexts, and one context can contain multiple controllers.
+* `pkg/gui/controllers/helpers`: Contains code that is shared between multiple controllers.
+* `pkg/gui/filetree`: Contains code relating to the representation of filetrees.
+* `pkg/gui/keybindings`: Contains code for mapping between keybindings and their labels
+* `pkg/gui/mergeconflicts`: Contains code relating to the handling of merge conflicts
+* `pkg/gui/modes`: Contains code relating to the state of different modes e.g. cherry picking mode, rebase mode.
+* `pkg/gui/patch_exploring`: Contains code relating to the state of patch-oriented views like the staging view.
+* `pkg/gui/popup`: Contains code that lets you easily raise popups
+* `pkg/gui/presentation`: Contains presentation code i.e. code concerned with rendering content inside views
+* `pkg/gui/services/custom_commands`: Contains code related to user-defined custom commands.
+* `pkg/gui/status`: Contains code for invoking loaders and toasts
+* `pkg/gui/style`: Contains code for specifying text styles (colour, bold, etc)
+* `pkg/gui/types`: Contains various gui-specific types and interfaces. Lots of code lives here to avoid circular dependencies
+* `vendor/github.com/jesseduffield/gocui`: Gocui is the underlying library used for handling the gui event loop, handling keypresses, and rendering the UI. It defines the View struct which our own context structs build upon.
+
+## Important files
+
+* `pkg/config/user_config.go`: defines the user config and default values
+* `pkg/gui/keybindings.go`: defines keybindings which have not yet been moved into a controller (originally all keybindings were defined here)
+* `pkg/gui/controllers.go`: links up controllers with contexts
+* `pkg/gui/controllers/helpers/helpers.go`: defines all the different helper structs
+* `pkg/commands/git.go`: defines all the different git command structs
+* `pkg/gui/gui.go`: defines the top-level gui state and gui initialisation/run code
+* `pkg/gui/layout.go`: defines what happens on each render
+* `pkg/gui/controllers/helpers/window_arrangement_helper.go`: defines the layout of the UI and the size/position of each window
+* `pkg/gui/context/context.go`: defines the different contexts
+* `pkg/gui/context/setup.go`: defines initialisation code for all contexts
+* `pkg/gui/context.go`: manages the lifecycle of contexts, the context stack, and focus changes.
+* `pkg/gui/types/views.go`: defines views
+* `pkg/gui/views.go`: defines the ordering of views (front to back) and their initialisation code
+* `pkg/gui/gui_common.go`: defines gui-specific methods that all controllers and helpers have access to
+* `pkg/i18n/english.go`: defines the set of i18n strings and their English values
+* `pkg/gui/controllers/helpers/refresh_helper.go`: manages refreshing of models. The refresh helper is typically invoked at the end of an action to re-load affected models from git (e.g. re-load branches after doing a git pull)
+* `pkg/gui/controllers/quit_actions.go`: contains code that runs when you hit 'escape' on a view (assuming the view doesn't define its own escape handler)
+* `vendor/github.com/jesseduffield/gocui/gui.go`: defines the gocui gui struct
+* `vendor/github.com/jesseduffield/gocui/view.go`: defines the gocui view struct
+
+## Concepts
+
+* **View**: Views are defined in the gocui package, and they maintain an internal buffer of content which is rendered each time the screen is drawn.
+* **Context**: A context is tied to a view and contains some additional state and logic specific to that view e.g. the branches context has code relating specifically to branches, and writes the list of branches to the branches view. Views and contexts share some responsibilities for historical reasons.
+* **Controller**: A controller defined keybindings with associated handlers. One controller can be assigned to multiple contexts and one context can have multiple controllers. For example the list controller handles keybindings relating to navigating a list, and is assigned to all list contexts (e.g. the branches context).
+* **Helper**: A helper defines shared code used by controllers, or used by some other parts of the application. Often a controller will have a method that ends up needing to be used by another controller, so in that case we move the method out into a helper so that both controllers can use it. We need to do this because controllers cannot refer to other controllers' methods.
+
+In terms of dependencies, controllers sit at the highest level, so they can refer to helpers, contexts, and views (although it's preferable for view-specific code to live in contexts). Helpers can refer to contexts and views, and contexts can only refer to views. Views can't refer to contexts, controllers, or helpers.
+
+* **Window**: A window is a section of the screen which will render a view. Windows are named after the default view that appears there, so for example there is a 'stash' window that is so named because by default the stash view appears there. But if you press enter on a stash entry, the stash entry's files will be shown in a different view, but in the same window.
+* **Panel**: The term 'panel' is still used in a few places to refer to either a view or a window, and it's a term that is now deprecated in favour of 'view' and 'window'.
+* **Tab**: Each tab in a window (e.g. Files, Worktrees, Submodules) actually has a corresponding view which we bring to the front upon changing tabs.
+* **Model**: Representation of a git object e.g. commits, branches, files.
+* **ViewModel**: Used by a context to maintain state related to the view.
+* **Keybinding**: A keybinding associates a _key_ with an _action_. For example if you press the 'down' arrow, the action performed will be your cursor moving down a list by one.
+* **Action**: An action is the thing that happens when you press a key. Often an action will invoke a git command, but not always: for example, navigation actions don't involve git.
+* **Common structs**: Most structs have a field named `c` which contains a 'common' struct: a struct containing a bag of dependencies that most structs of the same layer require. For example if you want to access a helper from a controller you can do so with `self.c.Helpers.MyHelper`.
+
+## Event loop and threads
+
+The event loop is managed in the `MainLoop` function of `vendor/github.com/jesseduffield/gocui/gui.go`. Any time there is an event like a key press or a window resize, the event will be processed and then the screen will be redrawn. This involves calling the `layout` function defined in `pkg/gui/layout.go`, which lays out the windows and invokes some on-render hooks.
+
+Often, as part of handling a keypress, we'll want to run some code asynchronously so that it doesn't block the UI thread. For this we'll typically run `self.c.OnWorker(myFunc)`. If the worker wants to then do something on the UI thread again it can call `self.c.OnUIThread(myOtherFunc)`.
+
+## Legacy code structure
+
+Before we had controllers and contexts, all the code lived directly in the gui package under a gui God Struct. This was fairly bloated and so we split things out to have a better separation of concerns. Nonetheless, it's a big effort to migrate all the code so we still have some logic in the gui struct that ought to live somewhere else. Likewise, we have some keybindings defined in `pkg/gui/keybindings.go` that ought to live on a controller (all keybindings used to be defined in that one file).
+
+The new structure has its own problems: we don't have a clear guide on whether code should live in a controller or helper. The current approach is to put code in a controller until it's needed by another controller, and to then extract it out into a helper. We may be better off just putting code in helpers to start with and leaving controllers super-thin, with the responsibility of just pairing keys with corresponding helper functions. But it's not clear to me if that would be better than the current approach.
+

docs/dev/README.md

@@ -1,5 +1,6 @@
 # Dev Documentation Overview
 
-* [Busy/Idle tracking](./Busy.md).
+* [Codebase Guide](./Codebase_Guide.md)
+* [Busy/Idle Tracking](./Busy.md)
 * [Integration Tests](../../pkg/integration/README.md)
 * [Demo Recordings](./Demo_Recordings.md)

docs/keybindings/Keybindings_en.md

@@ -1,4 +1,4 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
 # Lazygit Keybindings
 
@@ -6,348 +6,359 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
 
 ## Global keybindings
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: Switch to a recent repo
-  <kbd>&lt;pgup&gt;</kbd>: Scroll up main panel (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: Scroll down main panel (fn+down/shift+j)
-  <kbd>@</kbd>: Open command log menu
-  <kbd>}</kbd>: Increase the size of the context shown around changes in the diff view
-  <kbd>{</kbd>: Decrease the size of the context shown around changes in the diff view
-  <kbd>:</kbd>: Execute custom command
-  <kbd>&lt;c-p&gt;</kbd>: View custom patch options
-  <kbd>m</kbd>: View merge/rebase options
-  <kbd>R</kbd>: Refresh
-  <kbd>+</kbd>: Next screen mode (normal/half/fullscreen)
-  <kbd>_</kbd>: Prev screen mode
-  <kbd>?</kbd>: Open menu
-  <kbd>&lt;c-s&gt;</kbd>: View filter-by-path options
-  <kbd>W</kbd>: Open diff menu
-  <kbd>&lt;c-e&gt;</kbd>: Open diff menu
-  <kbd>&lt;c-w&gt;</kbd>: Toggle whether or not whitespace changes are shown in the diff view
-  <kbd>z</kbd>: Undo
-  <kbd>&lt;c-z&gt;</kbd>: Redo
-  <kbd>P</kbd>: Push
-  <kbd>p</kbd>: Pull
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | Switch to a recent repo |  |
+| `` <pgup> (fn+up/shift+k) `` | Scroll up main window |  |
+| `` <pgdown> (fn+down/shift+j) `` | Scroll down main window |  |
+| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
+| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view. |
+| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view. |
+| `` : `` | Execute custom command | Bring up a prompt where you can enter a shell command to execute. Not to be confused with pre-configured custom commands. |
+| `` <c-p> `` | View custom patch options |  |
+| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
+| `` R `` | Refresh | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
+| `` + `` | Next screen mode (normal/half/fullscreen) |  |
+| `` _ `` | Prev screen mode |  |
+| `` ? `` | Open keybindings menu |  |
+| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
+| `` W `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` <c-e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` q `` | Quit |  |
+| `` <esc> `` | Cancel |  |
+| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view. |
+| `` z `` | Undo | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
+| `` <c-z> `` | Redo | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
 
 ## List panel navigation
 
-<pre>
-  <kbd>,</kbd>: Previous page
-  <kbd>.</kbd>: Next page
-  <kbd>&lt;</kbd>: Scroll to top
-  <kbd>&gt;</kbd>: Scroll to bottom
-  <kbd>/</kbd>: Search the current view by text
-  <kbd>H</kbd>: Scroll left
-  <kbd>L</kbd>: Scroll right
-  <kbd>]</kbd>: Next tab
-  <kbd>[</kbd>: Previous tab
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | Previous page |  |
+| `` . `` | Next page |  |
+| `` < `` | Scroll to top |  |
+| `` > `` | Scroll to bottom |  |
+| `` v `` | Toggle range select |  |
+| `` <s-down> `` | Range select down |  |
+| `` <s-up> `` | Range select up |  |
+| `` / `` | Search the current view by text |  |
+| `` H `` | Scroll left |  |
+| `` L `` | Scroll right |  |
+| `` ] `` | Next tab |  |
+| `` [ `` | Previous tab |  |
 
 ## Commit files
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy the committed file name to the clipboard
-  <kbd>c</kbd>: Checkout file
-  <kbd>d</kbd>: Discard this commit's changes to this file
-  <kbd>o</kbd>: Open file
-  <kbd>e</kbd>: Edit file
-  <kbd>&lt;space&gt;</kbd>: Toggle file included in patch
-  <kbd>a</kbd>: Toggle all files included in patch
-  <kbd>&lt;enter&gt;</kbd>: Enter file to add selected lines to the patch (or toggle directory collapsed)
-  <kbd>`</kbd>: Toggle file tree view
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy path to clipboard |  |
+| `` c `` | Checkout | Checkout file. This replaces the file in your working tree with the version from the selected commit. |
+| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
+| `` o `` | Open file | Open file in default application. |
+| `` e `` | Edit | Open file in external editor. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | Enter file / Toggle directory collapsed | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
+| `` ` `` | Toggle file tree view | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` / `` | Search the current view by text |  |
 
 ## Commit summary
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Confirm
-  <kbd>&lt;esc&gt;</kbd>: Close
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Confirm |  |
+| `` <esc> `` | Close |  |
 
 ## Commits
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy commit SHA to clipboard
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>b</kbd>: View bisect options
-  <kbd>s</kbd>: Squash down
-  <kbd>f</kbd>: Fixup commit
-  <kbd>r</kbd>: Reword commit
-  <kbd>R</kbd>: Reword commit with editor
-  <kbd>d</kbd>: Delete commit
-  <kbd>e</kbd>: Edit commit
-  <kbd>p</kbd>: Pick commit (when mid-rebase)
-  <kbd>F</kbd>: Create fixup commit for this commit
-  <kbd>S</kbd>: Squash all 'fixup!' commits above selected commit (autosquash)
-  <kbd>&lt;c-j&gt;</kbd>: Move commit down one
-  <kbd>&lt;c-k&gt;</kbd>: Move commit up one
-  <kbd>v</kbd>: Paste commits (cherry-pick)
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: Amend commit with staged changes
-  <kbd>a</kbd>: Set/Reset commit author
-  <kbd>t</kbd>: Revert commit
-  <kbd>T</kbd>: Tag commit
-  <kbd>&lt;c-l&gt;</kbd>: Open log menu
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Create new branch off of commit
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: Copy commit (cherry-pick)
-  <kbd>C</kbd>: Copy commit range (cherry-pick)
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy commit hash to clipboard |  |
+| `` <c-r> `` | Reset copied (cherry-picked) commits selection |  |
+| `` b `` | View bisect options |  |
+| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
+| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to fixup, but the selected commit's message will be discarded. |
+| `` r `` | Reword | Reword the selected commit's message. |
+| `` R `` | Reword with editor |  |
+| `` d `` | Drop | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
+| `` e `` | Edit (start interactive rebase) | Edit the selected commit. Use this to start an interactive rebase from the selected commit. When already mid-rebase, this will mark the selected commit for editing, which means that upon continuing the rebase, the rebase will pause at the selected commit to allow you to make changes. |
+| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.
+If you would instead like to start an interactive rebase from the selected commit, press `e`. |
+| `` p `` | Pick | Mark the selected commit to be picked (when mid-rebase). This means that the commit will be retained upon continuing the rebase. |
+| `` F `` | Create fixup commit | Create 'fixup!' commit for the selected commit. Later on, you can press `S` on this same commit to apply all above fixup commits. |
+| `` S `` | Apply fixup commits | Squash all 'fixup!' commits, either above the selected commit, or all in current branch (autosquash). |
+| `` <c-j> `` | Move commit down one |  |
+| `` <c-k> `` | Move commit up one |  |
+| `` V `` | Paste (cherry-pick) |  |
+| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
+| `` A `` | Amend | Amend commit with staged changes. If the selected commit is the HEAD commit, this will perform `git commit --amend`. Otherwise the commit will be amended via a rebase. |
+| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
+| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
+| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
+| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
+| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Open commit in browser |  |
+| `` n `` | Create new branch off of commit |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | View files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Search the current view by text |  |
 
 ## Confirmation panel
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Confirm
-  <kbd>&lt;esc&gt;</kbd>: Close/Cancel
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Confirm |  |
+| `` <esc> `` | Close/Cancel |  |
 
 ## Files
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy the file name to the clipboard
-  <kbd>d</kbd>: View 'discard changes' options
-  <kbd>&lt;space&gt;</kbd>: Toggle staged
-  <kbd>&lt;c-b&gt;</kbd>: Filter files by status
-  <kbd>c</kbd>: Commit changes
-  <kbd>w</kbd>: Commit changes without pre-commit hook
-  <kbd>A</kbd>: Amend last commit
-  <kbd>C</kbd>: Commit changes using git editor
-  <kbd>e</kbd>: Edit file
-  <kbd>o</kbd>: Open file
-  <kbd>i</kbd>: Ignore or exclude file
-  <kbd>r</kbd>: Refresh files
-  <kbd>s</kbd>: Stash all changes
-  <kbd>S</kbd>: View stash options
-  <kbd>a</kbd>: Stage/unstage all
-  <kbd>&lt;enter&gt;</kbd>: Stage individual hunks/lines for file, or collapse/expand for directory
-  <kbd>g</kbd>: View upstream reset options
-  <kbd>D</kbd>: View reset options
-  <kbd>`</kbd>: Toggle file tree view
-  <kbd>M</kbd>: Open external merge tool (git mergetool)
-  <kbd>f</kbd>: Fetch
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy path to clipboard |  |
+| `` <space> `` | Stage | Toggle staged for selected file. |
+| `` <c-b> `` | Filter files by status |  |
+| `` y `` | Copy to clipboard |  |
+| `` c `` | Commit | Commit staged changes. |
+| `` w `` | Commit changes without pre-commit hook |  |
+| `` A `` | Amend last commit |  |
+| `` C `` | Commit changes using git editor |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edit | Open file in external editor. |
+| `` o `` | Open file | Open file in default application. |
+| `` i `` | Ignore or exclude file |  |
+| `` r `` | Refresh files |  |
+| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
+| `` S `` | View stash options | View stash options (e.g. stash all, stash staged, stash unstaged). |
+| `` a `` | Stage all | Toggle staged/unstaged for all files in working tree. |
+| `` <enter> `` | Stage lines / Collapse directory | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
+| `` d `` | Discard | View options for discarding changes to the selected file. |
+| `` g `` | View upstream reset options |  |
+| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
+| `` ` `` | Toggle file tree view | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` M `` | Open external merge tool | Run `git mergetool`. |
+| `` f `` | Fetch | Fetch changes from remote. |
+| `` / `` | Search the current view by text |  |
 
 ## Local branches
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy branch name to clipboard
-  <kbd>i</kbd>: Show git-flow options
-  <kbd>&lt;space&gt;</kbd>: Checkout
-  <kbd>n</kbd>: New branch
-  <kbd>o</kbd>: Create pull request
-  <kbd>O</kbd>: Create pull request options
-  <kbd>&lt;c-y&gt;</kbd>: Copy pull request URL to clipboard
-  <kbd>c</kbd>: Checkout by name
-  <kbd>F</kbd>: Force checkout
-  <kbd>d</kbd>: Delete branch
-  <kbd>r</kbd>: Rebase checked-out branch onto this branch
-  <kbd>M</kbd>: Merge into currently checked out branch
-  <kbd>f</kbd>: Fast-forward this branch from its upstream
-  <kbd>T</kbd>: Create tag
-  <kbd>g</kbd>: View reset options
-  <kbd>R</kbd>: Rename branch
-  <kbd>u</kbd>: Set/Unset upstream
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy branch name to clipboard |  |
+| `` i `` | Show git-flow options |  |
+| `` <space> `` | Checkout | Checkout selected item. |
+| `` n `` | New branch |  |
+| `` o `` | Create pull request |  |
+| `` O `` | View create pull request options |  |
+| `` <c-y> `` | Copy pull request URL to clipboard |  |
+| `` c `` | Checkout by name | Checkout by name. In the input box you can enter '-' to switch to the last branch. |
+| `` F `` | Force checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
+| `` d `` | Delete | View delete options for local/remote branch. |
+| `` r `` | Rebase | Rebase the checked-out branch onto the selected branch. |
+| `` M `` | Merge | Merge selected branch into currently checked out branch. |
+| `` f `` | Fast-forward | Fast-forward selected branch from its upstream. |
+| `` T `` | New tag |  |
+| `` s `` | Sort order |  |
+| `` g `` | Reset |  |
+| `` R `` | Rename branch |  |
+| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
+| `` <enter> `` | View commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Main panel (merging)
 
-<pre>
-  <kbd>e</kbd>: Edit file
-  <kbd>o</kbd>: Open file
-  <kbd>&lt;left&gt;</kbd>: Select previous conflict
-  <kbd>&lt;right&gt;</kbd>: Select next conflict
-  <kbd>&lt;up&gt;</kbd>: Select previous hunk
-  <kbd>&lt;down&gt;</kbd>: Select next hunk
-  <kbd>z</kbd>: Undo
-  <kbd>M</kbd>: Open external merge tool (git mergetool)
-  <kbd>&lt;space&gt;</kbd>: Pick hunk
-  <kbd>b</kbd>: Pick all hunks
-  <kbd>&lt;esc&gt;</kbd>: Return to files panel
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Pick hunk |  |
+| `` b `` | Pick all hunks |  |
+| `` <up> `` | Previous hunk |  |
+| `` <down> `` | Next hunk |  |
+| `` <left> `` | Previous conflict |  |
+| `` <right> `` | Next conflict |  |
+| `` z `` | Undo | Undo last merge conflict resolution. |
+| `` e `` | Edit file | Open file in external editor. |
+| `` o `` | Open file | Open file in default application. |
+| `` M `` | Open external merge tool | Run `git mergetool`. |
+| `` <esc> `` | Return to files panel |  |
 
 ## Main panel (normal)
 
-<pre>
-  <kbd>mouse wheel down</kbd>: Scroll down (fn+up)
-  <kbd>mouse wheel up</kbd>: Scroll up (fn+down)
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | Scroll down |  |
+| `` mouse wheel up (fn+down) `` | Scroll up |  |
 
 ## Main panel (patch building)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Select previous hunk
-  <kbd>&lt;right&gt;</kbd>: Select next hunk
-  <kbd>v</kbd>: Toggle drag select
-  <kbd>V</kbd>: Toggle drag select
-  <kbd>a</kbd>: Toggle select hunk
-  <kbd>&lt;c-o&gt;</kbd>: Copy the selected text to the clipboard
-  <kbd>o</kbd>: Open file
-  <kbd>e</kbd>: Edit file
-  <kbd>&lt;space&gt;</kbd>: Add/Remove line(s) to patch
-  <kbd>&lt;esc&gt;</kbd>: Exit custom patch builder
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Go to previous hunk |  |
+| `` <right> `` | Go to next hunk |  |
+| `` v `` | Toggle range select |  |
+| `` a `` | Select hunk | Toggle hunk selection mode. |
+| `` <c-o> `` | Copy selected text to clipboard |  |
+| `` o `` | Open file | Open file in default application. |
+| `` e `` | Edit file | Open file in external editor. |
+| `` <space> `` | Toggle lines in patch |  |
+| `` <esc> `` | Exit custom patch builder |  |
+| `` / `` | Search the current view by text |  |
 
 ## Main panel (staging)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Select previous hunk
-  <kbd>&lt;right&gt;</kbd>: Select next hunk
-  <kbd>v</kbd>: Toggle drag select
-  <kbd>V</kbd>: Toggle drag select
-  <kbd>a</kbd>: Toggle select hunk
-  <kbd>&lt;c-o&gt;</kbd>: Copy the selected text to the clipboard
-  <kbd>o</kbd>: Open file
-  <kbd>e</kbd>: Edit file
-  <kbd>&lt;esc&gt;</kbd>: Return to files panel
-  <kbd>&lt;tab&gt;</kbd>: Switch to other panel (staged/unstaged changes)
-  <kbd>&lt;space&gt;</kbd>: Toggle line staged / unstaged
-  <kbd>d</kbd>: Discard change (git reset)
-  <kbd>E</kbd>: Edit hunk
-  <kbd>c</kbd>: Commit changes
-  <kbd>w</kbd>: Commit changes without pre-commit hook
-  <kbd>C</kbd>: Commit changes using git editor
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Go to previous hunk |  |
+| `` <right> `` | Go to next hunk |  |
+| `` v `` | Toggle range select |  |
+| `` a `` | Select hunk | Toggle hunk selection mode. |
+| `` <c-o> `` | Copy selected text to clipboard |  |
+| `` <space> `` | Stage | Toggle selection staged / unstaged. |
+| `` d `` | Discard | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
+| `` o `` | Open file | Open file in default application. |
+| `` e `` | Edit file | Open file in external editor. |
+| `` <esc> `` | Return to files panel |  |
+| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
+| `` E `` | Edit hunk | Edit selected hunk in external editor. |
+| `` c `` | Commit | Commit staged changes. |
+| `` w `` | Commit changes without pre-commit hook |  |
+| `` C `` | Commit changes using git editor |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | Search the current view by text |  |
 
 ## Menu
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Execute
-  <kbd>&lt;esc&gt;</kbd>: Close
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Execute |  |
+| `` <esc> `` | Close |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Reflog
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy commit SHA to clipboard
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Create new branch off of commit
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: Copy commit (cherry-pick)
-  <kbd>C</kbd>: Copy commit range (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy commit hash to clipboard |  |
+| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Open commit in browser |  |
+| `` n `` | Create new branch off of commit |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset copied (cherry-picked) commits selection |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | View commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Remote branches
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy branch name to clipboard
-  <kbd>&lt;space&gt;</kbd>: Checkout
-  <kbd>n</kbd>: New branch
-  <kbd>M</kbd>: Merge into currently checked out branch
-  <kbd>r</kbd>: Rebase checked-out branch onto this branch
-  <kbd>d</kbd>: Delete branch
-  <kbd>u</kbd>: Set as upstream of checked-out branch
-  <kbd>g</kbd>: View reset options
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy branch name to clipboard |  |
+| `` <space> `` | Checkout | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
+| `` n `` | New branch |  |
+| `` M `` | Merge | Merge selected branch into currently checked out branch. |
+| `` r `` | Rebase | Rebase the checked-out branch onto the selected branch. |
+| `` d `` | Delete | Delete the remote branch from the remote. |
+| `` u `` | Set as upstream | Set the selected remote branch as the upstream of the checked-out branch. |
+| `` s `` | Sort order |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | View commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Remotes
 
-<pre>
-  <kbd>f</kbd>: Fetch remote
-  <kbd>n</kbd>: Add new remote
-  <kbd>d</kbd>: Remove remote
-  <kbd>e</kbd>: Edit remote
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | View branches |  |
+| `` n `` | New remote |  |
+| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
+| `` e `` | Edit | Edit the selected remote's name or URL. |
+| `` f `` | Fetch | Fetch updates from the remote repository. This retrieves new commits and branches without merging them into your local branches. |
+| `` / `` | Filter the current view by text |  |
 
 ## Stash
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Apply
-  <kbd>g</kbd>: Pop
-  <kbd>d</kbd>: Drop
-  <kbd>n</kbd>: New branch
-  <kbd>r</kbd>: Rename stash
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Apply | Apply the stash entry to your working directory. |
+| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
+| `` d `` | Drop | Remove the stash entry from the stash list. |
+| `` n `` | New branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
+| `` r `` | Rename stash |  |
+| `` <enter> `` | View files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Status
 
-<pre>
-  <kbd>o</kbd>: Open config file
-  <kbd>e</kbd>: Edit config file
-  <kbd>u</kbd>: Check for update
-  <kbd>&lt;enter&gt;</kbd>: Switch to a recent repo
-  <kbd>a</kbd>: Show all branch logs
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | Open config file | Open file in default application. |
+| `` e `` | Edit config file | Open file in external editor. |
+| `` u `` | Check for update |  |
+| `` <enter> `` | Switch to a recent repo |  |
+| `` a `` | Show all branch logs |  |
 
 ## Sub-commits
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy commit SHA to clipboard
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Create new branch off of commit
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: Copy commit (cherry-pick)
-  <kbd>C</kbd>: Copy commit range (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy commit hash to clipboard |  |
+| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Open commit in browser |  |
+| `` n `` | Create new branch off of commit |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset copied (cherry-picked) commits selection |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | View files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Search the current view by text |  |
 
 ## Submodules
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy submodule name to clipboard
-  <kbd>&lt;enter&gt;</kbd>: Enter submodule
-  <kbd>&lt;space&gt;</kbd>: Enter submodule
-  <kbd>d</kbd>: Remove submodule
-  <kbd>u</kbd>: Update submodule
-  <kbd>n</kbd>: Add new submodule
-  <kbd>e</kbd>: Update submodule URL
-  <kbd>i</kbd>: Initialize submodule
-  <kbd>b</kbd>: View bulk submodule options
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Copy submodule name to clipboard |  |
+| `` <enter> `` | Enter | Enter submodule. After entering the submodule, you can press `<esc>` to escape back to the parent repo. |
+| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
+| `` u `` | Update | Update selected submodule. |
+| `` n `` | New submodule |  |
+| `` e `` | Update submodule URL |  |
+| `` i `` | Initialize | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
+| `` b `` | View bulk submodule options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Tags
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Checkout
-  <kbd>d</kbd>: Delete tag
-  <kbd>P</kbd>: Push tag
-  <kbd>n</kbd>: Create tag
-  <kbd>g</kbd>: View reset options
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Checkout | Checkout the selected tag tag as a detached HEAD. |
+| `` n `` | New tag | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
+| `` d `` | Delete | View delete options for local/remote tag. |
+| `` P `` | Push tag | Push the selected tag to a remote. You'll be prompted to select a remote. |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | View commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Worktrees
 
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | New worktree |  |
+| `` <space> `` | Switch | Switch to the selected worktree. |
+| `` o `` | Open in editor |  |
+| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
+| `` / `` | Filter the current view by text |  |

docs/keybindings/Keybindings_ja.md

@@ -1,4 +1,4 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
 # Lazygit キーバインド
 
@@ -6,348 +6,359 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
 
 ## グローバルキーバインド
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: 最近使用したリポジトリに切り替え
-  <kbd>&lt;pgup&gt;</kbd>: メインパネルを上にスクロール (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: メインパネルを下にスクロール (fn+down/shift+j)
-  <kbd>@</kbd>: コマンドログメニューを開く
-  <kbd>}</kbd>: Increase the size of the context shown around changes in the diff view
-  <kbd>{</kbd>: Decrease the size of the context shown around changes in the diff view
-  <kbd>:</kbd>: カスタムコマンドを実行
-  <kbd>&lt;c-p&gt;</kbd>: View custom patch options
-  <kbd>m</kbd>: View merge/rebase options
-  <kbd>R</kbd>: リフレッシュ
-  <kbd>+</kbd>: 次のスクリーンモード (normal/half/fullscreen)
-  <kbd>_</kbd>: 前のスクリーンモード
-  <kbd>?</kbd>: メニューを開く
-  <kbd>&lt;c-s&gt;</kbd>: View filter-by-path options
-  <kbd>W</kbd>: 差分メニューを開く
-  <kbd>&lt;c-e&gt;</kbd>: 差分メニューを開く
-  <kbd>&lt;c-w&gt;</kbd>: 空白文字の差分の表示有無を切り替え
-  <kbd>z</kbd>: アンドゥ (via reflog) (experimental)
-  <kbd>&lt;c-z&gt;</kbd>: リドゥ (via reflog) (experimental)
-  <kbd>P</kbd>: Push
-  <kbd>p</kbd>: Pull
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | 最近使用したリポジトリに切り替え |  |
+| `` <pgup> (fn+up/shift+k) `` | メインパネルを上にスクロール |  |
+| `` <pgdown> (fn+down/shift+j) `` | メインパネルを下にスクロール |  |
+| `` @ `` | コマンドログメニューを開く | View options for the command log e.g. show/hide the command log and focus the command log. |
+| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view. |
+| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view. |
+| `` : `` | カスタムコマンドを実行 | Bring up a prompt where you can enter a shell command to execute. Not to be confused with pre-configured custom commands. |
+| `` <c-p> `` | View custom patch options |  |
+| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
+| `` R `` | リフレッシュ | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
+| `` + `` | 次のスクリーンモード (normal/half/fullscreen) |  |
+| `` _ `` | 前のスクリーンモード |  |
+| `` ? `` | メニューを開く |  |
+| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
+| `` W `` | 差分メニューを開く | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` <c-e> `` | 差分メニューを開く | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` q `` | 終了 |  |
+| `` <esc> `` | キャンセル |  |
+| `` <c-w> `` | 空白文字の差分の表示有無を切り替え | Toggle whether or not whitespace changes are shown in the diff view. |
+| `` z `` | アンドゥ (via reflog) (experimental) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
+| `` <c-z> `` | リドゥ (via reflog) (experimental) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
 
 ## 一覧パネルの操作
 
-<pre>
-  <kbd>,</kbd>: 前のページ
-  <kbd>.</kbd>: 次のページ
-  <kbd>&lt;</kbd>: 最上部までスクロール
-  <kbd>&gt;</kbd>: 最下部までスクロール
-  <kbd>/</kbd>: 検索を開始
-  <kbd>H</kbd>: 左スクロール
-  <kbd>L</kbd>: 右スクロール
-  <kbd>]</kbd>: 次のタブ
-  <kbd>[</kbd>: 前のタブ
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | 前のページ |  |
+| `` . `` | 次のページ |  |
+| `` < `` | 最上部までスクロール |  |
+| `` > `` | 最下部までスクロール |  |
+| `` v `` | 範囲選択を切り替え |  |
+| `` <s-down> `` | Range select down |  |
+| `` <s-up> `` | Range select up |  |
+| `` / `` | 検索を開始 |  |
+| `` H `` | 左スクロール |  |
+| `` L `` | 右スクロール |  |
+| `` ] `` | 次のタブ |  |
+| `` [ `` | 前のタブ |  |
 
 ## Stash
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: 適用
-  <kbd>g</kbd>: Pop
-  <kbd>d</kbd>: Drop
-  <kbd>n</kbd>: 新しいブランチを作成
-  <kbd>r</kbd>: Stashを変更
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 適用 | Apply the stash entry to your working directory. |
+| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
+| `` d `` | Drop | Remove the stash entry from the stash list. |
+| `` n `` | 新しいブランチを作成 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
+| `` r `` | Stashを変更 |  |
+| `` <enter> `` | View files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Sub-commits
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: コミットのSHAをクリップボードにコピー
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: コミットをチェックアウト
-  <kbd>y</kbd>: コミットの情報をコピー
-  <kbd>o</kbd>: ブラウザでコミットを開く
-  <kbd>n</kbd>: コミットにブランチを作成
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: コミットをコピー (cherry-pick)
-  <kbd>C</kbd>: コミットを範囲コピー (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: 検索を開始
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | コミットのhashをクリップボードにコピー |  |
+| `` <space> `` | チェックアウト | Checkout the selected commit as a detached HEAD. |
+| `` y `` | コミットの情報をコピー | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | ブラウザでコミットを開く |  |
+| `` n `` | コミットにブランチを作成 |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | コミットをコピー (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset copied (cherry-picked) commits selection |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | View files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | 検索を開始 |  |
 
 ## Worktrees
 
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | New worktree |  |
+| `` <space> `` | Switch | Switch to the selected worktree. |
+| `` o `` | Open in editor |  |
+| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
+| `` / `` | Filter the current view by text |  |
 
 ## コミット
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: コミットのSHAをクリップボードにコピー
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>b</kbd>: View bisect options
-  <kbd>s</kbd>: Squash down
-  <kbd>f</kbd>: Fixup commit
-  <kbd>r</kbd>: コミットメッセージを変更
-  <kbd>R</kbd>: エディタでコミットメッセージを編集
-  <kbd>d</kbd>: コミットを削除
-  <kbd>e</kbd>: コミットを編集
-  <kbd>p</kbd>: Pick commit (when mid-rebase)
-  <kbd>F</kbd>: このコミットに対するfixupコミットを作成
-  <kbd>S</kbd>: Squash all 'fixup!' commits above selected commit (autosquash)
-  <kbd>&lt;c-j&gt;</kbd>: コミットを1つ下に移動
-  <kbd>&lt;c-k&gt;</kbd>: コミットを1つ上に移動
-  <kbd>v</kbd>: コミットを貼り付け (cherry-pick)
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: ステージされた変更でamendコミット
-  <kbd>a</kbd>: Set/Reset commit author
-  <kbd>t</kbd>: コミットをrevert
-  <kbd>T</kbd>: タグを作成
-  <kbd>&lt;c-l&gt;</kbd>: ログメニューを開く
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: コミットをチェックアウト
-  <kbd>y</kbd>: コミットの情報をコピー
-  <kbd>o</kbd>: ブラウザでコミットを開く
-  <kbd>n</kbd>: コミットにブランチを作成
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: コミットをコピー (cherry-pick)
-  <kbd>C</kbd>: コミットを範囲コピー (cherry-pick)
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: 検索を開始
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | コミットのhashをクリップボードにコピー |  |
+| `` <c-r> `` | Reset copied (cherry-picked) commits selection |  |
+| `` b `` | View bisect options |  |
+| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
+| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to fixup, but the selected commit's message will be discarded. |
+| `` r `` | コミットメッセージを変更 | Reword the selected commit's message. |
+| `` R `` | エディタでコミットメッセージを編集 |  |
+| `` d `` | コミットを削除 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
+| `` e `` | Edit (start interactive rebase) | コミットを編集 |
+| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.
+If you would instead like to start an interactive rebase from the selected commit, press `e`. |
+| `` p `` | Pick | Mark the selected commit to be picked (when mid-rebase). This means that the commit will be retained upon continuing the rebase. |
+| `` F `` | Fixupコミットを作成 | このコミットに対するfixupコミットを作成 |
+| `` S `` | Apply fixup commits | Squash all 'fixup!' commits, either above the selected commit, or all in current branch (autosquash). |
+| `` <c-j> `` | コミットを1つ下に移動 |  |
+| `` <c-k> `` | コミットを1つ上に移動 |  |
+| `` V `` | コミットを貼り付け (cherry-pick) |  |
+| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
+| `` A `` | Amend | ステージされた変更でamendコミット |
+| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
+| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
+| `` T `` | タグを作成 | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
+| `` <c-l> `` | ログメニューを開く | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
+| `` <space> `` | チェックアウト | Checkout the selected commit as a detached HEAD. |
+| `` y `` | コミットの情報をコピー | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | ブラウザでコミットを開く |  |
+| `` n `` | コミットにブランチを作成 |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | コミットをコピー (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | View files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | 検索を開始 |  |
 
 ## コミットファイル
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: コミットされたファイル名をクリップボードにコピー
-  <kbd>c</kbd>: Checkout file
-  <kbd>d</kbd>: Discard this commit's changes to this file
-  <kbd>o</kbd>: ファイルを開く
-  <kbd>e</kbd>: ファイルを編集
-  <kbd>&lt;space&gt;</kbd>: Toggle file included in patch
-  <kbd>a</kbd>: Toggle all files included in patch
-  <kbd>&lt;enter&gt;</kbd>: Enter file to add selected lines to the patch (or toggle directory collapsed)
-  <kbd>`</kbd>: ファイルツリーの表示を切り替え
-  <kbd>/</kbd>: 検索を開始
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | ファイル名をクリップボードにコピー |  |
+| `` c `` | チェックアウト | Checkout file. This replaces the file in your working tree with the version from the selected commit. |
+| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
+| `` o `` | ファイルを開く | Open file in default application. |
+| `` e `` | Edit | Open file in external editor. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | Enter file / Toggle directory collapsed | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
+| `` ` `` | ファイルツリーの表示を切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` / `` | 検索を開始 |  |
 
 ## コミットメッセージ
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 確認
-  <kbd>&lt;esc&gt;</kbd>: 閉じる
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 確認 |  |
+| `` <esc> `` | 閉じる |  |
 
 ## サブモジュール
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: サブモジュール名をクリップボードにコピー
-  <kbd>&lt;enter&gt;</kbd>: サブモジュールを開く
-  <kbd>&lt;space&gt;</kbd>: サブモジュールを開く
-  <kbd>d</kbd>: サブモジュールを削除
-  <kbd>u</kbd>: サブモジュールを更新
-  <kbd>n</kbd>: サブモジュールを新規追加
-  <kbd>e</kbd>: サブモジュールのURLを更新
-  <kbd>i</kbd>: サブモジュールを初期化
-  <kbd>b</kbd>: View bulk submodule options
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | サブモジュール名をクリップボードにコピー |  |
+| `` <enter> `` | Enter | サブモジュールを開く |
+| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
+| `` u `` | Update | サブモジュールを更新 |
+| `` n `` | サブモジュールを新規追加 |  |
+| `` e `` | サブモジュールのURLを更新 |  |
+| `` i `` | Initialize | サブモジュールを初期化 |
+| `` b `` | View bulk submodule options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## ステータス
 
-<pre>
-  <kbd>o</kbd>: 設定ファイルを開く
-  <kbd>e</kbd>: 設定ファイルを編集
-  <kbd>u</kbd>: 更新を確認
-  <kbd>&lt;enter&gt;</kbd>: 最近使用したリポジトリに切り替え
-  <kbd>a</kbd>: すべてのブランチログを表示
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | 設定ファイルを開く | Open file in default application. |
+| `` e `` | 設定ファイルを編集 | Open file in external editor. |
+| `` u `` | 更新を確認 |  |
+| `` <enter> `` | 最近使用したリポジトリに切り替え |  |
+| `` a `` | すべてのブランチログを表示 |  |
 
 ## タグ
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: チェックアウト
-  <kbd>d</kbd>: タグを削除
-  <kbd>P</kbd>: タグをpush
-  <kbd>n</kbd>: タグを作成
-  <kbd>g</kbd>: View reset options
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: コミットを閲覧
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | チェックアウト | Checkout the selected tag tag as a detached HEAD. |
+| `` n `` | タグを作成 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
+| `` d `` | Delete | View delete options for local/remote tag. |
+| `` P `` | タグをpush | Push the selected tag to a remote. You'll be prompted to select a remote. |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | コミットを閲覧 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## ファイル
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: ファイル名をクリップボードにコピー
-  <kbd>d</kbd>: View 'discard changes' options
-  <kbd>&lt;space&gt;</kbd>: ステージ/アンステージ
-  <kbd>&lt;c-b&gt;</kbd>: ファイルをフィルタ (ステージ/アンステージ)
-  <kbd>c</kbd>: 変更をコミット
-  <kbd>w</kbd>: pre-commitフックを実行せずに変更をコミット
-  <kbd>A</kbd>: 最新のコミットにamend
-  <kbd>C</kbd>: gitエディタを使用して変更をコミット
-  <kbd>e</kbd>: ファイルを編集
-  <kbd>o</kbd>: ファイルを開く
-  <kbd>i</kbd>: ファイルをignore
-  <kbd>r</kbd>: ファイルをリフレッシュ
-  <kbd>s</kbd>: 変更をstash
-  <kbd>S</kbd>: View stash options
-  <kbd>a</kbd>: すべての変更をステージ/アンステージ
-  <kbd>&lt;enter&gt;</kbd>: Stage individual hunks/lines for file, or collapse/expand for directory
-  <kbd>g</kbd>: View upstream reset options
-  <kbd>D</kbd>: View reset options
-  <kbd>`</kbd>: ファイルツリーの表示を切り替え
-  <kbd>M</kbd>: Git mergetoolを開く
-  <kbd>f</kbd>: Fetch
-  <kbd>/</kbd>: 検索を開始
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | ファイル名をクリップボードにコピー |  |
+| `` <space> `` | ステージ/アンステージ | Toggle staged for selected file. |
+| `` <c-b> `` | ファイルをフィルタ (ステージ/アンステージ) |  |
+| `` y `` | Copy to clipboard |  |
+| `` c `` | 変更をコミット | Commit staged changes. |
+| `` w `` | pre-commitフックを実行せずに変更をコミット |  |
+| `` A `` | 最新のコミットにamend |  |
+| `` C `` | gitエディタを使用して変更をコミット |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edit | Open file in external editor. |
+| `` o `` | ファイルを開く | Open file in default application. |
+| `` i `` | ファイルをignore |  |
+| `` r `` | ファイルをリフレッシュ |  |
+| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
+| `` S `` | View stash options | View stash options (e.g. stash all, stash staged, stash unstaged). |
+| `` a `` | すべての変更をステージ/アンステージ | Toggle staged/unstaged for all files in working tree. |
+| `` <enter> `` | Stage lines / Collapse directory | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
+| `` d `` | Discard | View options for discarding changes to the selected file. |
+| `` g `` | View upstream reset options |  |
+| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
+| `` ` `` | ファイルツリーの表示を切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` M `` | Git mergetoolを開く | Run `git mergetool`. |
+| `` f `` | Fetch | Fetch changes from remote. |
+| `` / `` | 検索を開始 |  |
 
 ## ブランチ
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: ブランチ名をクリップボードにコピー
-  <kbd>i</kbd>: Show git-flow options
-  <kbd>&lt;space&gt;</kbd>: チェックアウト
-  <kbd>n</kbd>: 新しいブランチを作成
-  <kbd>o</kbd>: Pull Requestを作成
-  <kbd>O</kbd>: Create pull request options
-  <kbd>&lt;c-y&gt;</kbd>: Pull RequestのURLをクリップボードにコピー
-  <kbd>c</kbd>: Checkout by name
-  <kbd>F</kbd>: Force checkout
-  <kbd>d</kbd>: ブランチを削除
-  <kbd>r</kbd>: Rebase checked-out branch onto this branch
-  <kbd>M</kbd>: 現在のブランチにマージ
-  <kbd>f</kbd>: Fast-forward this branch from its upstream
-  <kbd>T</kbd>: タグを作成
-  <kbd>g</kbd>: View reset options
-  <kbd>R</kbd>: ブランチ名を変更
-  <kbd>u</kbd>: Set/Unset upstream
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: コミットを閲覧
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | ブランチ名をクリップボードにコピー |  |
+| `` i `` | Show git-flow options |  |
+| `` <space> `` | チェックアウト | Checkout selected item. |
+| `` n `` | 新しいブランチを作成 |  |
+| `` o `` | Pull Requestを作成 |  |
+| `` O `` | View create pull request options |  |
+| `` <c-y> `` | Pull RequestのURLをクリップボードにコピー |  |
+| `` c `` | Checkout by name | Checkout by name. In the input box you can enter '-' to switch to the last branch. |
+| `` F `` | Force checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
+| `` d `` | Delete | View delete options for local/remote branch. |
+| `` r `` | Rebase | Rebase the checked-out branch onto the selected branch. |
+| `` M `` | 現在のブランチにマージ | Merge selected branch into currently checked out branch. |
+| `` f `` | Fast-forward | Fast-forward selected branch from its upstream. |
+| `` T `` | タグを作成 |  |
+| `` s `` | 並び替え |  |
+| `` g `` | Reset |  |
+| `` R `` | ブランチ名を変更 |  |
+| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
+| `` <enter> `` | コミットを閲覧 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## メインパネル (Merging)
 
-<pre>
-  <kbd>e</kbd>: ファイルを編集
-  <kbd>o</kbd>: ファイルを開く
-  <kbd>&lt;left&gt;</kbd>: 前のコンフリクトを選択
-  <kbd>&lt;right&gt;</kbd>: 次のコンフリクトを選択
-  <kbd>&lt;up&gt;</kbd>: 前のhunkを選択
-  <kbd>&lt;down&gt;</kbd>: 次のhunkを選択
-  <kbd>z</kbd>: アンドゥ
-  <kbd>M</kbd>: Git mergetoolを開く
-  <kbd>&lt;space&gt;</kbd>: Pick hunk
-  <kbd>b</kbd>: Pick all hunks
-  <kbd>&lt;esc&gt;</kbd>: ファイル一覧に戻る
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Pick hunk |  |
+| `` b `` | Pick all hunks |  |
+| `` <up> `` | 前のhunkを選択 |  |
+| `` <down> `` | 次のhunkを選択 |  |
+| `` <left> `` | 前のコンフリクトを選択 |  |
+| `` <right> `` | 次のコンフリクトを選択 |  |
+| `` z `` | アンドゥ | Undo last merge conflict resolution. |
+| `` e `` | ファイルを編集 | Open file in external editor. |
+| `` o `` | ファイルを開く | Open file in default application. |
+| `` M `` | Git mergetoolを開く | Run `git mergetool`. |
+| `` <esc> `` | ファイル一覧に戻る |  |
 
 ## メインパネル (Normal)
 
-<pre>
-  <kbd>mouse wheel down</kbd>: 下にスクロール (fn+up)
-  <kbd>mouse wheel up</kbd>: 上にスクロール (fn+down)
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | 下にスクロール |  |
+| `` mouse wheel up (fn+down) `` | 上にスクロール |  |
 
 ## メインパネル (Patch Building)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 前のhunkを選択
-  <kbd>&lt;right&gt;</kbd>: 次のhunkを選択
-  <kbd>v</kbd>: 範囲選択を切り替え
-  <kbd>V</kbd>: 範囲選択を切り替え
-  <kbd>a</kbd>: Hunk選択を切り替え
-  <kbd>&lt;c-o&gt;</kbd>: 選択されたテキストをクリップボードにコピー
-  <kbd>o</kbd>: ファイルを開く
-  <kbd>e</kbd>: ファイルを編集
-  <kbd>&lt;space&gt;</kbd>: 行をパッチに追加/削除
-  <kbd>&lt;esc&gt;</kbd>: Exit custom patch builder
-  <kbd>/</kbd>: 検索を開始
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 前のhunkを選択 |  |
+| `` <right> `` | 次のhunkを選択 |  |
+| `` v `` | 範囲選択を切り替え |  |
+| `` a `` | Hunk選択を切り替え | Toggle hunk selection mode. |
+| `` <c-o> `` | 選択されたテキストをクリップボードにコピー |  |
+| `` o `` | ファイルを開く | Open file in default application. |
+| `` e `` | ファイルを編集 | Open file in external editor. |
+| `` <space> `` | 行をパッチに追加/削除 |  |
+| `` <esc> `` | Exit custom patch builder |  |
+| `` / `` | 検索を開始 |  |
 
 ## メインパネル (Staging)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 前のhunkを選択
-  <kbd>&lt;right&gt;</kbd>: 次のhunkを選択
-  <kbd>v</kbd>: 範囲選択を切り替え
-  <kbd>V</kbd>: 範囲選択を切り替え
-  <kbd>a</kbd>: Hunk選択を切り替え
-  <kbd>&lt;c-o&gt;</kbd>: 選択されたテキストをクリップボードにコピー
-  <kbd>o</kbd>: ファイルを開く
-  <kbd>e</kbd>: ファイルを編集
-  <kbd>&lt;esc&gt;</kbd>: ファイル一覧に戻る
-  <kbd>&lt;tab&gt;</kbd>: パネルを切り替え
-  <kbd>&lt;space&gt;</kbd>: 選択行をステージ/アンステージ
-  <kbd>d</kbd>: 変更を削除 (git reset)
-  <kbd>E</kbd>: Edit hunk
-  <kbd>c</kbd>: 変更をコミット
-  <kbd>w</kbd>: pre-commitフックを実行せずに変更をコミット
-  <kbd>C</kbd>: gitエディタを使用して変更をコミット
-  <kbd>/</kbd>: 検索を開始
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 前のhunkを選択 |  |
+| `` <right> `` | 次のhunkを選択 |  |
+| `` v `` | 範囲選択を切り替え |  |
+| `` a `` | Hunk選択を切り替え | Toggle hunk selection mode. |
+| `` <c-o> `` | 選択されたテキストをクリップボードにコピー |  |
+| `` <space> `` | ステージ/アンステージ | 選択行をステージ/アンステージ |
+| `` d `` | 変更を削除 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
+| `` o `` | ファイルを開く | Open file in default application. |
+| `` e `` | ファイルを編集 | Open file in external editor. |
+| `` <esc> `` | ファイル一覧に戻る |  |
+| `` <tab> `` | パネルを切り替え | Switch to other view (staged/unstaged changes). |
+| `` E `` | Edit hunk | Edit selected hunk in external editor. |
+| `` c `` | 変更をコミット | Commit staged changes. |
+| `` w `` | pre-commitフックを実行せずに変更をコミット |  |
+| `` C `` | gitエディタを使用して変更をコミット |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | 検索を開始 |  |
 
 ## メニュー
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 実行
-  <kbd>&lt;esc&gt;</kbd>: 閉じる
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 実行 |  |
+| `` <esc> `` | 閉じる |  |
+| `` / `` | Filter the current view by text |  |
 
 ## リモート
 
-<pre>
-  <kbd>f</kbd>: リモートをfetch
-  <kbd>n</kbd>: リモートを新規追加
-  <kbd>d</kbd>: リモートを削除
-  <kbd>e</kbd>: リモートを編集
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | View branches |  |
+| `` n `` | リモートを新規追加 |  |
+| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
+| `` e `` | Edit | リモートを編集 |
+| `` f `` | Fetch | リモートをfetch |
+| `` / `` | Filter the current view by text |  |
 
 ## リモートブランチ
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: ブランチ名をクリップボードにコピー
-  <kbd>&lt;space&gt;</kbd>: チェックアウト
-  <kbd>n</kbd>: 新しいブランチを作成
-  <kbd>M</kbd>: 現在のブランチにマージ
-  <kbd>r</kbd>: Rebase checked-out branch onto this branch
-  <kbd>d</kbd>: ブランチを削除
-  <kbd>u</kbd>: Set as upstream of checked-out branch
-  <kbd>g</kbd>: View reset options
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: コミットを閲覧
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | ブランチ名をクリップボードにコピー |  |
+| `` <space> `` | チェックアウト | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
+| `` n `` | 新しいブランチを作成 |  |
+| `` M `` | 現在のブランチにマージ | Merge selected branch into currently checked out branch. |
+| `` r `` | Rebase | Rebase the checked-out branch onto the selected branch. |
+| `` d `` | Delete | Delete the remote branch from the remote. |
+| `` u `` | Set as upstream | Set the selected remote branch as the upstream of the checked-out branch. |
+| `` s `` | 並び替え |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | コミットを閲覧 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 参照ログ
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: コミットのSHAをクリップボードにコピー
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: コミットをチェックアウト
-  <kbd>y</kbd>: コミットの情報をコピー
-  <kbd>o</kbd>: ブラウザでコミットを開く
-  <kbd>n</kbd>: コミットにブランチを作成
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: コミットをコピー (cherry-pick)
-  <kbd>C</kbd>: コミットを範囲コピー (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: コミットを閲覧
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | コミットのhashをクリップボードにコピー |  |
+| `` <space> `` | チェックアウト | Checkout the selected commit as a detached HEAD. |
+| `` y `` | コミットの情報をコピー | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | ブラウザでコミットを開く |  |
+| `` n `` | コミットにブランチを作成 |  |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | コミットをコピー (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset copied (cherry-picked) commits selection |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | コミットを閲覧 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 確認パネル
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 確認
-  <kbd>&lt;esc&gt;</kbd>: 閉じる/キャンセル
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 確認 |  |
+| `` <esc> `` | 閉じる/キャンセル |  |

docs/keybindings/Keybindings_ko.md

@@ -1,4 +1,4 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
 # Lazygit 키 바인딩
 
@@ -6,348 +6,359 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
 
 ## 글로벌 키 바인딩
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: 최근에 사용한 저장소로 전환
-  <kbd>&lt;pgup&gt;</kbd>: 메인 패널을 위로 스크롤 (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: 메인 패널을 아래로로 스크롤 (fn+down/shift+j)
-  <kbd>@</kbd>: 명령어 로그 메뉴 열기
-  <kbd>}</kbd>: Diff 보기의 변경 사항 주위에 표시되는 컨텍스트의 크기를 늘리기
-  <kbd>{</kbd>: Diff 보기의 변경 사항 주위에 표시되는 컨텍스트 크기 줄이기
-  <kbd>:</kbd>: Execute custom command
-  <kbd>&lt;c-p&gt;</kbd>: 커스텀 Patch 옵션 보기
-  <kbd>m</kbd>: View merge/rebase options
-  <kbd>R</kbd>: 새로고침
-  <kbd>+</kbd>: 다음 스크린 모드 (normal/half/fullscreen)
-  <kbd>_</kbd>: 이전 스크린 모드
-  <kbd>?</kbd>: 매뉴 열기
-  <kbd>&lt;c-s&gt;</kbd>: View filter-by-path options
-  <kbd>W</kbd>: Diff 메뉴 열기
-  <kbd>&lt;c-e&gt;</kbd>: Diff 메뉴 열기
-  <kbd>&lt;c-w&gt;</kbd>: 공백문자를 Diff 뷰에서 표시 여부 전환
-  <kbd>z</kbd>: 되돌리기 (reflog) (실험적)
-  <kbd>&lt;c-z&gt;</kbd>: 다시 실행 (reflog) (실험적)
-  <kbd>P</kbd>: 푸시
-  <kbd>p</kbd>: 업데이트
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | 최근에 사용한 저장소로 전환 |  |
+| `` <pgup> (fn+up/shift+k) `` | 메인 패널을 위로 스크롤 |  |
+| `` <pgdown> (fn+down/shift+j) `` | 메인 패널을 아래로로 스크롤 |  |
+| `` @ `` | 명령어 로그 메뉴 열기 | View options for the command log e.g. show/hide the command log and focus the command log. |
+| `` P `` | 푸시 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` p `` | 업데이트 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` } `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트의 크기를 늘리기 | Increase the amount of the context shown around changes in the diff view. |
+| `` { `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트 크기 줄이기 | Decrease the amount of the context shown around changes in the diff view. |
+| `` : `` | Execute custom command | Bring up a prompt where you can enter a shell command to execute. Not to be confused with pre-configured custom commands. |
+| `` <c-p> `` | 커스텀 Patch 옵션 보기 |  |
+| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
+| `` R `` | 새로고침 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
+| `` + `` | 다음 스크린 모드 (normal/half/fullscreen) |  |
+| `` _ `` | 이전 스크린 모드 |  |
+| `` ? `` | 매뉴 열기 |  |
+| `` <c-s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
+| `` W `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` <c-e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` q `` | 종료 |  |
+| `` <esc> `` | 취소 |  |
+| `` <c-w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view. |
+| `` z `` | 되돌리기 (reflog) (실험적) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
+| `` <c-z> `` | 다시 실행 (reflog) (실험적) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
 
 ## List panel navigation
 
-<pre>
-  <kbd>,</kbd>: 이전 페이지
-  <kbd>.</kbd>: 다음 페이지
-  <kbd>&lt;</kbd>: 맨 위로 스크롤 
-  <kbd>&gt;</kbd>: 맨 아래로 스크롤 
-  <kbd>/</kbd>: 검색 시작
-  <kbd>H</kbd>: 우 스크롤
-  <kbd>L</kbd>: 좌 스크롤
-  <kbd>]</kbd>: 이전 탭
-  <kbd>[</kbd>: 다음 탭
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | 이전 페이지 |  |
+| `` . `` | 다음 페이지 |  |
+| `` < `` | 맨 위로 스크롤  |  |
+| `` > `` | 맨 아래로 스크롤  |  |
+| `` v `` | 드래그 선택 전환 |  |
+| `` <s-down> `` | Range select down |  |
+| `` <s-up> `` | Range select up |  |
+| `` / `` | 검색 시작 |  |
+| `` H `` | 우 스크롤 |  |
+| `` L `` | 좌 스크롤 |  |
+| `` ] `` | 이전 탭 |  |
+| `` [ `` | 다음 탭 |  |
 
 ## Reflog
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 커밋 SHA를 클립보드에 복사
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 커밋을 체크아웃
-  <kbd>y</kbd>: 커밋 attribute 복사
-  <kbd>o</kbd>: 브라우저에서 커밋 열기
-  <kbd>n</kbd>: 커밋에서 새 브랜치를 만듭니다.
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: 커밋을 복사 (cherry-pick)
-  <kbd>C</kbd>: 커밋을 범위로 복사 (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: 커밋 보기
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 커밋 해시를 클립보드에 복사 |  |
+| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 브라우저에서 커밋 열기 |  |
+| `` n `` | 커밋에서 새 브랜치를 만듭니다. |  |
+| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset cherry-picked (copied) commits selection |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | 커밋 보기 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Stash
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: 적용
-  <kbd>g</kbd>: Pop
-  <kbd>d</kbd>: Drop
-  <kbd>n</kbd>: 새 브랜치 생성
-  <kbd>r</kbd>: Rename stash
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 적용 | Apply the stash entry to your working directory. |
+| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
+| `` d `` | Drop | Remove the stash entry from the stash list. |
+| `` n `` | 새 브랜치 생성 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
+| `` r `` | Rename stash |  |
+| `` <enter> `` | View selected item's files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Sub-commits
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 커밋 SHA를 클립보드에 복사
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 커밋을 체크아웃
-  <kbd>y</kbd>: 커밋 attribute 복사
-  <kbd>o</kbd>: 브라우저에서 커밋 열기
-  <kbd>n</kbd>: 커밋에서 새 브랜치를 만듭니다.
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: 커밋을 복사 (cherry-pick)
-  <kbd>C</kbd>: 커밋을 범위로 복사 (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: 검색 시작
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 커밋 해시를 클립보드에 복사 |  |
+| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 브라우저에서 커밋 열기 |  |
+| `` n `` | 커밋에서 새 브랜치를 만듭니다. |  |
+| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset cherry-picked (copied) commits selection |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | View selected item's files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | 검색 시작 |  |
 
 ## Worktrees
 
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | New worktree |  |
+| `` <space> `` | Switch | Switch to the selected worktree. |
+| `` o `` | Open in editor |  |
+| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
+| `` / `` | Filter the current view by text |  |
 
 ## 메뉴
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 실행
-  <kbd>&lt;esc&gt;</kbd>: 닫기
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 실행 |  |
+| `` <esc> `` | 닫기 |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 메인 패널 (Merging)
 
-<pre>
-  <kbd>e</kbd>: 파일 편집
-  <kbd>o</kbd>: 파일 닫기
-  <kbd>&lt;left&gt;</kbd>: 이전 충돌을 선택
-  <kbd>&lt;right&gt;</kbd>: 다음 충돌을 선택
-  <kbd>&lt;up&gt;</kbd>: 이전 hunk를 선택
-  <kbd>&lt;down&gt;</kbd>: 다음 hunk를 선택
-  <kbd>z</kbd>: 되돌리기
-  <kbd>M</kbd>: Git mergetool를 열기
-  <kbd>&lt;space&gt;</kbd>: Pick hunk
-  <kbd>b</kbd>: Pick all hunks
-  <kbd>&lt;esc&gt;</kbd>: 파일 목록으로 돌아가기
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Pick hunk |  |
+| `` b `` | Pick all hunks |  |
+| `` <up> `` | 이전 hunk를 선택 |  |
+| `` <down> `` | 다음 hunk를 선택 |  |
+| `` <left> `` | 이전 충돌을 선택 |  |
+| `` <right> `` | 다음 충돌을 선택 |  |
+| `` z `` | 되돌리기 | Undo last merge conflict resolution. |
+| `` e `` | 파일 편집 | Open file in external editor. |
+| `` o `` | 파일 닫기 | Open file in default application. |
+| `` M `` | Git mergetool를 열기 | Run `git mergetool`. |
+| `` <esc> `` | 파일 목록으로 돌아가기 |  |
 
 ## 메인 패널 (Normal)
 
-<pre>
-  <kbd>mouse wheel down</kbd>: 아래로 스크롤 (fn+up)
-  <kbd>mouse wheel up</kbd>: 위로 스크롤 (fn+down)
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | 아래로 스크롤 |  |
+| `` mouse wheel up (fn+down) `` | 위로 스크롤 |  |
 
 ## 메인 패널 (Patch Building)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 이전 hunk를 선택
-  <kbd>&lt;right&gt;</kbd>: 다음 hunk를 선택
-  <kbd>v</kbd>: 드래그 선택 전환
-  <kbd>V</kbd>: 드래그 선택 전환
-  <kbd>a</kbd>: Toggle select hunk
-  <kbd>&lt;c-o&gt;</kbd>: 선택한 텍스트를 클립보드에 복사
-  <kbd>o</kbd>: 파일 닫기
-  <kbd>e</kbd>: 파일 편집
-  <kbd>&lt;space&gt;</kbd>: Line(s)을 패치에 추가/삭제
-  <kbd>&lt;esc&gt;</kbd>: Exit custom patch builder
-  <kbd>/</kbd>: 검색 시작
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 이전 hunk를 선택 |  |
+| `` <right> `` | 다음 hunk를 선택 |  |
+| `` v `` | 드래그 선택 전환 |  |
+| `` a `` | Toggle select hunk | Toggle hunk selection mode. |
+| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 |  |
+| `` o `` | 파일 닫기 | Open file in default application. |
+| `` e `` | 파일 편집 | Open file in external editor. |
+| `` <space> `` | Line(s)을 패치에 추가/삭제 |  |
+| `` <esc> `` | Exit custom patch builder |  |
+| `` / `` | 검색 시작 |  |
 
 ## 메인 패널 (Staging)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 이전 hunk를 선택
-  <kbd>&lt;right&gt;</kbd>: 다음 hunk를 선택
-  <kbd>v</kbd>: 드래그 선택 전환
-  <kbd>V</kbd>: 드래그 선택 전환
-  <kbd>a</kbd>: Toggle select hunk
-  <kbd>&lt;c-o&gt;</kbd>: 선택한 텍스트를 클립보드에 복사
-  <kbd>o</kbd>: 파일 닫기
-  <kbd>e</kbd>: 파일 편집
-  <kbd>&lt;esc&gt;</kbd>: 파일 목록으로 돌아가기
-  <kbd>&lt;tab&gt;</kbd>: 패널 전환
-  <kbd>&lt;space&gt;</kbd>: 선택한 행을 staged / unstaged
-  <kbd>d</kbd>: 변경을 삭제 (git reset)
-  <kbd>E</kbd>: Edit hunk
-  <kbd>c</kbd>: 커밋 변경내용
-  <kbd>w</kbd>: Commit changes without pre-commit hook
-  <kbd>C</kbd>: Git 편집기를 사용하여 변경 내용을 커밋합니다.
-  <kbd>/</kbd>: 검색 시작
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 이전 hunk를 선택 |  |
+| `` <right> `` | 다음 hunk를 선택 |  |
+| `` v `` | 드래그 선택 전환 |  |
+| `` a `` | Toggle select hunk | Toggle hunk selection mode. |
+| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 |  |
+| `` <space> `` | Staged 전환 | 선택한 행을 staged / unstaged |
+| `` d `` | 변경을 삭제 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
+| `` o `` | 파일 닫기 | Open file in default application. |
+| `` e `` | 파일 편집 | Open file in external editor. |
+| `` <esc> `` | 파일 목록으로 돌아가기 |  |
+| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
+| `` E `` | Edit hunk | Edit selected hunk in external editor. |
+| `` c `` | 커밋 변경내용 | Commit staged changes. |
+| `` w `` | Commit changes without pre-commit hook |  |
+| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | 검색 시작 |  |
 
 ## 브랜치
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 브랜치명을 클립보드에 복사
-  <kbd>i</kbd>: Git-flow 옵션 보기
-  <kbd>&lt;space&gt;</kbd>: 체크아웃
-  <kbd>n</kbd>: 새 브랜치 생성
-  <kbd>o</kbd>: 풀 리퀘스트 생성
-  <kbd>O</kbd>: 풀 리퀘스트 생성 옵션
-  <kbd>&lt;c-y&gt;</kbd>: 풀 리퀘스트 URL을 클립보드에 복사
-  <kbd>c</kbd>: 이름으로 체크아웃
-  <kbd>F</kbd>: 강제 체크아웃
-  <kbd>d</kbd>: 브랜치 삭제
-  <kbd>r</kbd>: 체크아웃된 브랜치를 이 브랜치에 리베이스
-  <kbd>M</kbd>: 현재 브랜치에 병합
-  <kbd>f</kbd>: Fast-forward this branch from its upstream
-  <kbd>T</kbd>: 태그를 생성
-  <kbd>g</kbd>: View reset options
-  <kbd>R</kbd>: 브랜치 이름 변경
-  <kbd>u</kbd>: Set/Unset upstream
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 커밋 보기
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 브랜치명을 클립보드에 복사 |  |
+| `` i `` | Git-flow 옵션 보기 |  |
+| `` <space> `` | 체크아웃 | Checkout selected item. |
+| `` n `` | 새 브랜치 생성 |  |
+| `` o `` | 풀 리퀘스트 생성 |  |
+| `` O `` | 풀 리퀘스트 생성 옵션 |  |
+| `` <c-y> `` | 풀 리퀘스트 URL을 클립보드에 복사 |  |
+| `` c `` | 이름으로 체크아웃 | Checkout by name. In the input box you can enter '-' to switch to the last branch. |
+| `` F `` | 강제 체크아웃 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
+| `` d `` | Delete | View delete options for local/remote branch. |
+| `` r `` | 체크아웃된 브랜치를 이 브랜치에 리베이스 | Rebase the checked-out branch onto the selected branch. |
+| `` M `` | 현재 브랜치에 병합 | Merge selected branch into currently checked out branch. |
+| `` f `` | Fast-forward this branch from its upstream | Fast-forward selected branch from its upstream. |
+| `` T `` | 태그를 생성 |  |
+| `` s `` | Sort order |  |
+| `` g `` | View reset options |  |
+| `` R `` | 브랜치 이름 변경 |  |
+| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
+| `` <enter> `` | 커밋 보기 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 상태
 
-<pre>
-  <kbd>o</kbd>: 설정 파일 열기
-  <kbd>e</kbd>: 설정 파일 수정
-  <kbd>u</kbd>: 업데이트 확인
-  <kbd>&lt;enter&gt;</kbd>: 최근에 사용한 저장소로 전환
-  <kbd>a</kbd>: 모든 브랜치 로그 표시
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | 설정 파일 열기 | Open file in default application. |
+| `` e `` | 설정 파일 수정 | Open file in external editor. |
+| `` u `` | 업데이트 확인 |  |
+| `` <enter> `` | 최근에 사용한 저장소로 전환 |  |
+| `` a `` | 모든 브랜치 로그 표시 |  |
 
 ## 서브모듈
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 서브모듈 이름을 클립보드에 복사
-  <kbd>&lt;enter&gt;</kbd>: 서브모듈 열기
-  <kbd>&lt;space&gt;</kbd>: 서브모듈 열기
-  <kbd>d</kbd>: 서브모듈 삭제
-  <kbd>u</kbd>: 서브모듈 업데이트
-  <kbd>n</kbd>: 새로운 서브모듈 추가
-  <kbd>e</kbd>: 서브모듈의 URL을 수정
-  <kbd>i</kbd>: 서브모듈 초기화
-  <kbd>b</kbd>: View bulk submodule options
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 서브모듈 이름을 클립보드에 복사 |  |
+| `` <enter> `` | Enter | 서브모듈 열기 |
+| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
+| `` u `` | Update | 서브모듈 업데이트 |
+| `` n `` | 새로운 서브모듈 추가 |  |
+| `` e `` | 서브모듈의 URL을 수정 |  |
+| `` i `` | Initialize | 서브모듈 초기화 |
+| `` b `` | View bulk submodule options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 원격
 
-<pre>
-  <kbd>f</kbd>: 원격을 업데이트
-  <kbd>n</kbd>: 새로운 Remote 추가
-  <kbd>d</kbd>: Remote를 삭제
-  <kbd>e</kbd>: Remote를 수정
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | View branches |  |
+| `` n `` | 새로운 Remote 추가 |  |
+| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
+| `` e `` | Edit | Remote를 수정 |
+| `` f `` | Fetch | 원격을 업데이트 |
+| `` / `` | Filter the current view by text |  |
 
 ## 원격 브랜치
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 브랜치명을 클립보드에 복사
-  <kbd>&lt;space&gt;</kbd>: 체크아웃
-  <kbd>n</kbd>: 새 브랜치 생성
-  <kbd>M</kbd>: 현재 브랜치에 병합
-  <kbd>r</kbd>: 체크아웃된 브랜치를 이 브랜치에 리베이스
-  <kbd>d</kbd>: 브랜치 삭제
-  <kbd>u</kbd>: Set as upstream of checked-out branch
-  <kbd>g</kbd>: View reset options
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 커밋 보기
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 브랜치명을 클립보드에 복사 |  |
+| `` <space> `` | 체크아웃 | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
+| `` n `` | 새 브랜치 생성 |  |
+| `` M `` | 현재 브랜치에 병합 | Merge selected branch into currently checked out branch. |
+| `` r `` | 체크아웃된 브랜치를 이 브랜치에 리베이스 | Rebase the checked-out branch onto the selected branch. |
+| `` d `` | Delete | Delete the remote branch from the remote. |
+| `` u `` | Set as upstream | Set the selected remote branch as the upstream of the checked-out branch. |
+| `` s `` | Sort order |  |
+| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | 커밋 보기 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 커밋
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 커밋 SHA를 클립보드에 복사
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>b</kbd>: Bisect 옵션 보기
-  <kbd>s</kbd>: Squash down
-  <kbd>f</kbd>: Fixup commit
-  <kbd>r</kbd>: 커밋메시지 변경
-  <kbd>R</kbd>: 에디터에서 커밋메시지 수정
-  <kbd>d</kbd>: 커밋 삭제
-  <kbd>e</kbd>: 커밋을 편집
-  <kbd>p</kbd>: Pick commit (when mid-rebase)
-  <kbd>F</kbd>: Create fixup commit for this commit
-  <kbd>S</kbd>: Squash all 'fixup!' commits above selected commit (autosquash)
-  <kbd>&lt;c-j&gt;</kbd>: 커밋을 1개 아래로 이동
-  <kbd>&lt;c-k&gt;</kbd>: 커밋을 1개 위로 이동
-  <kbd>v</kbd>: 커밋을 붙여넣기 (cherry-pick)
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: Amend commit with staged changes
-  <kbd>a</kbd>: Set/Reset commit author
-  <kbd>t</kbd>: 커밋 되돌리기
-  <kbd>T</kbd>: Tag commit
-  <kbd>&lt;c-l&gt;</kbd>: 로그 메뉴 열기
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 커밋을 체크아웃
-  <kbd>y</kbd>: 커밋 attribute 복사
-  <kbd>o</kbd>: 브라우저에서 커밋 열기
-  <kbd>n</kbd>: 커밋에서 새 브랜치를 만듭니다.
-  <kbd>g</kbd>: View reset options
-  <kbd>c</kbd>: 커밋을 복사 (cherry-pick)
-  <kbd>C</kbd>: 커밋을 범위로 복사 (cherry-pick)
-  <kbd>&lt;enter&gt;</kbd>: View selected item's files
-  <kbd>/</kbd>: 검색 시작
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 커밋 해시를 클립보드에 복사 |  |
+| `` <c-r> `` | Reset cherry-picked (copied) commits selection |  |
+| `` b `` | Bisect 옵션 보기 |  |
+| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
+| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to fixup, but the selected commit's message will be discarded. |
+| `` r `` | 커밋메시지 변경 | Reword the selected commit's message. |
+| `` R `` | 에디터에서 커밋메시지 수정 |  |
+| `` d `` | 커밋 삭제 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
+| `` e `` | Edit (start interactive rebase) | 커밋을 편집 |
+| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.
+If you would instead like to start an interactive rebase from the selected commit, press `e`. |
+| `` p `` | Pick | Pick commit (when mid-rebase) |
+| `` F `` | Create fixup commit | Create fixup commit for this commit |
+| `` S `` | Apply fixup commits | Squash all 'fixup!' commits above selected commit (autosquash) |
+| `` <c-j> `` | 커밋을 1개 아래로 이동 |  |
+| `` <c-k> `` | 커밋을 1개 위로 이동 |  |
+| `` V `` | 커밋을 붙여넣기 (cherry-pick) |  |
+| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
+| `` A `` | Amend | Amend commit with staged changes |
+| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
+| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
+| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
+| `` <c-l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
+| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 브라우저에서 커밋 열기 |  |
+| `` n `` | 커밋에서 새 브랜치를 만듭니다. |  |
+| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | View selected item's files |  |
+| `` w `` | View worktree options |  |
+| `` / `` | 검색 시작 |  |
 
 ## 커밋 파일
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 커밋한 파일명을 클립보드에 복사
-  <kbd>c</kbd>: Checkout file
-  <kbd>d</kbd>: Discard this commit's changes to this file
-  <kbd>o</kbd>: 파일 닫기
-  <kbd>e</kbd>: 파일 편집
-  <kbd>&lt;space&gt;</kbd>: Toggle file included in patch
-  <kbd>a</kbd>: Toggle all files included in patch
-  <kbd>&lt;enter&gt;</kbd>: Enter file to add selected lines to the patch (or toggle directory collapsed)
-  <kbd>`</kbd>: 파일 트리뷰로 전환
-  <kbd>/</kbd>: 검색 시작
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 파일명을 클립보드에 복사 |  |
+| `` c `` | 체크아웃 | Checkout file |
+| `` d `` | Remove | Discard this commit's changes to this file |
+| `` o `` | 파일 닫기 | Open file in default application. |
+| `` e `` | Edit | Open file in external editor. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | Toggle all files included in patch | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | Enter file to add selected lines to the patch (or toggle directory collapsed) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
+| `` ` `` | 파일 트리뷰로 전환 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` / `` | 검색 시작 |  |
 
 ## 커밋메시지
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 확인
-  <kbd>&lt;esc&gt;</kbd>: 닫기
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 확인 |  |
+| `` <esc> `` | 닫기 |  |
 
 ## 태그
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: 체크아웃
-  <kbd>d</kbd>: 태그 삭제
-  <kbd>P</kbd>: 태그를 push
-  <kbd>n</kbd>: 태그를 생성
-  <kbd>g</kbd>: View reset options
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 커밋 보기
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 체크아웃 | Checkout the selected tag tag as a detached HEAD. |
+| `` n `` | 태그를 생성 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
+| `` d `` | Delete | View delete options for local/remote tag. |
+| `` P `` | 태그를 push | Push the selected tag to a remote. You'll be prompted to select a remote. |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | 커밋 보기 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 파일
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 파일명을 클립보드에 복사
-  <kbd>d</kbd>: View 'discard changes' options
-  <kbd>&lt;space&gt;</kbd>: Staged 전환
-  <kbd>&lt;c-b&gt;</kbd>: 파일을 필터하기 (Staged/unstaged)
-  <kbd>c</kbd>: 커밋 변경내용
-  <kbd>w</kbd>: Commit changes without pre-commit hook
-  <kbd>A</kbd>: 마지맛 커밋 수정
-  <kbd>C</kbd>: Git 편집기를 사용하여 변경 내용을 커밋합니다.
-  <kbd>e</kbd>: 파일 편집
-  <kbd>o</kbd>: 파일 닫기
-  <kbd>i</kbd>: Ignore file
-  <kbd>r</kbd>: 파일 새로고침
-  <kbd>s</kbd>: 변경사항을 Stash
-  <kbd>S</kbd>: Stash 옵션 보기
-  <kbd>a</kbd>: 모든 변경을 Staged/unstaged으로 전환
-  <kbd>&lt;enter&gt;</kbd>: Stage individual hunks/lines for file, or collapse/expand for directory
-  <kbd>g</kbd>: View upstream reset options
-  <kbd>D</kbd>: View reset options
-  <kbd>`</kbd>: 파일 트리뷰로 전환
-  <kbd>M</kbd>: Git mergetool를 열기
-  <kbd>f</kbd>: Fetch
-  <kbd>/</kbd>: 검색 시작
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 파일명을 클립보드에 복사 |  |
+| `` <space> `` | Staged 전환 | Toggle staged for selected file. |
+| `` <c-b> `` | 파일을 필터하기 (Staged/unstaged) |  |
+| `` y `` | Copy to clipboard |  |
+| `` c `` | 커밋 변경내용 | Commit staged changes. |
+| `` w `` | Commit changes without pre-commit hook |  |
+| `` A `` | 마지맛 커밋 수정 |  |
+| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edit | Open file in external editor. |
+| `` o `` | 파일 닫기 | Open file in default application. |
+| `` i `` | Ignore file |  |
+| `` r `` | 파일 새로고침 |  |
+| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
+| `` S `` | Stash 옵션 보기 | View stash options (e.g. stash all, stash staged, stash unstaged). |
+| `` a `` | 모든 변경을 Staged/unstaged으로 전환 | Toggle staged/unstaged for all files in working tree. |
+| `` <enter> `` | Stage individual hunks/lines for file, or collapse/expand for directory | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
+| `` d `` | View 'discard changes' options | View options for discarding changes to the selected file. |
+| `` g `` | View upstream reset options |  |
+| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
+| `` ` `` | 파일 트리뷰로 전환 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` M `` | Git mergetool를 열기 | Run `git mergetool`. |
+| `` f `` | Fetch | Fetch changes from remote. |
+| `` / `` | 검색 시작 |  |
 
 ## 확인 패널
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 확인
-  <kbd>&lt;esc&gt;</kbd>: 닫기/취소
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 확인 |  |
+| `` <esc> `` | 닫기/취소 |  |

docs/keybindings/Keybindings_nl.md

@@ -1,4 +1,4 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
 # Lazygit Sneltoetsen
 
@@ -6,348 +6,359 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
 
 ## Globale sneltoetsen
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: Wissel naar een recente repo
-  <kbd>&lt;pgup&gt;</kbd>: Scroll naar beneden vanaf hoofdpaneel (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: Scroll naar beneden vanaf hoofdpaneel (fn+down/shift+j)
-  <kbd>@</kbd>: Open command log menu
-  <kbd>}</kbd>: Increase the size of the context shown around changes in the diff view
-  <kbd>{</kbd>: Decrease the size of the context shown around changes in the diff view
-  <kbd>:</kbd>: Voer aangepaste commando uit
-  <kbd>&lt;c-p&gt;</kbd>: Bekijk aangepaste patch opties
-  <kbd>m</kbd>: Bekijk merge/rebase opties
-  <kbd>R</kbd>: Verversen
-  <kbd>+</kbd>: Volgende scherm modus (normaal/half/groot)
-  <kbd>_</kbd>: Vorige scherm modus
-  <kbd>?</kbd>: Open menu
-  <kbd>&lt;c-s&gt;</kbd>: Bekijk scoping opties
-  <kbd>W</kbd>: Open diff menu
-  <kbd>&lt;c-e&gt;</kbd>: Open diff menu
-  <kbd>&lt;c-w&gt;</kbd>: Toggle whether or not whitespace changes are shown in the diff view
-  <kbd>z</kbd>: Ongedaan maken (via reflog) (experimenteel)
-  <kbd>&lt;c-z&gt;</kbd>: Redo (via reflog) (experimenteel)
-  <kbd>P</kbd>: Push
-  <kbd>p</kbd>: Pull
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | Wissel naar een recente repo |  |
+| `` <pgup> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel |  |
+| `` <pgdown> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel |  |
+| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
+| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view. |
+| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view. |
+| `` : `` | Voer aangepaste commando uit | Bring up a prompt where you can enter a shell command to execute. Not to be confused with pre-configured custom commands. |
+| `` <c-p> `` | Bekijk aangepaste patch opties |  |
+| `` m `` | Bekijk merge/rebase opties | View options to abort/continue/skip the current merge/rebase. |
+| `` R `` | Verversen | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
+| `` + `` | Volgende scherm modus (normaal/half/groot) |  |
+| `` _ `` | Vorige scherm modus |  |
+| `` ? `` | Open menu |  |
+| `` <c-s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
+| `` W `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` <c-e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` q `` | Quit |  |
+| `` <esc> `` | Annuleren |  |
+| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view. |
+| `` z `` | Ongedaan maken (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
+| `` <c-z> `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
 
 ## Lijstpaneel navigatie
 
-<pre>
-  <kbd>,</kbd>: Vorige pagina
-  <kbd>.</kbd>: Volgende pagina
-  <kbd>&lt;</kbd>: Scroll naar boven
-  <kbd>&gt;</kbd>: Scroll naar beneden
-  <kbd>/</kbd>: Start met zoeken
-  <kbd>H</kbd>: Scroll left
-  <kbd>L</kbd>: Scroll right
-  <kbd>]</kbd>: Volgende tabblad
-  <kbd>[</kbd>: Vorige tabblad
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | Vorige pagina |  |
+| `` . `` | Volgende pagina |  |
+| `` < `` | Scroll naar boven |  |
+| `` > `` | Scroll naar beneden |  |
+| `` v `` | Toggle drag selecteer |  |
+| `` <s-down> `` | Range select down |  |
+| `` <s-up> `` | Range select up |  |
+| `` / `` | Start met zoeken |  |
+| `` H `` | Scroll left |  |
+| `` L `` | Scroll right |  |
+| `` ] `` | Volgende tabblad |  |
+| `` [ `` | Vorige tabblad |  |
 
 ## Bestanden
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer de bestandsnaam naar het klembord
-  <kbd>d</kbd>: Bekijk 'veranderingen ongedaan maken' opties
-  <kbd>&lt;space&gt;</kbd>: Toggle staged
-  <kbd>&lt;c-b&gt;</kbd>: Filter files by status
-  <kbd>c</kbd>: Commit veranderingen
-  <kbd>w</kbd>: Commit veranderingen zonder pre-commit hook
-  <kbd>A</kbd>: Wijzig laatste commit
-  <kbd>C</kbd>: Commit veranderingen met de git editor
-  <kbd>e</kbd>: Verander bestand
-  <kbd>o</kbd>: Open bestand
-  <kbd>i</kbd>: Ignore or exclude file
-  <kbd>r</kbd>: Refresh bestanden
-  <kbd>s</kbd>: Stash-bestanden
-  <kbd>S</kbd>: Bekijk stash opties
-  <kbd>a</kbd>: Toggle staged alle
-  <kbd>&lt;enter&gt;</kbd>: Stage individuele hunks/lijnen
-  <kbd>g</kbd>: Bekijk upstream reset opties
-  <kbd>D</kbd>: Bekijk reset opties
-  <kbd>`</kbd>: Toggle bestandsboom weergave
-  <kbd>M</kbd>: Open external merge tool (git mergetool)
-  <kbd>f</kbd>: Fetch
-  <kbd>/</kbd>: Start met zoeken
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer de bestandsnaam naar het klembord |  |
+| `` <space> `` | Toggle staged | Toggle staged for selected file. |
+| `` <c-b> `` | Filter files by status |  |
+| `` y `` | Copy to clipboard |  |
+| `` c `` | Commit veranderingen | Commit staged changes. |
+| `` w `` | Commit veranderingen zonder pre-commit hook |  |
+| `` A `` | Wijzig laatste commit |  |
+| `` C `` | Commit veranderingen met de git editor |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edit | Open file in external editor. |
+| `` o `` | Open bestand | Open file in default application. |
+| `` i `` | Ignore or exclude file |  |
+| `` r `` | Refresh bestanden |  |
+| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
+| `` S `` | Bekijk stash opties | View stash options (e.g. stash all, stash staged, stash unstaged). |
+| `` a `` | Toggle staged alle | Toggle staged/unstaged for all files in working tree. |
+| `` <enter> `` | Stage individuele hunks/lijnen | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
+| `` d `` | Bekijk 'veranderingen ongedaan maken' opties | View options for discarding changes to the selected file. |
+| `` g `` | Bekijk upstream reset opties |  |
+| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
+| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` M `` | Open external merge tool | Run `git mergetool`. |
+| `` f `` | Fetch | Fetch changes from remote. |
+| `` / `` | Start met zoeken |  |
 
 ## Bevestigingspaneel
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Bevestig
-  <kbd>&lt;esc&gt;</kbd>: Sluiten
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Bevestig |  |
+| `` <esc> `` | Sluiten |  |
 
 ## Branches
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer branch name naar klembord
-  <kbd>i</kbd>: Laat git-flow opties zien
-  <kbd>&lt;space&gt;</kbd>: Uitchecken
-  <kbd>n</kbd>: Nieuwe branch
-  <kbd>o</kbd>: Maak een pull-request
-  <kbd>O</kbd>: Bekijk opties voor pull-aanvraag
-  <kbd>&lt;c-y&gt;</kbd>: Kopieer de URL van het pull-verzoek naar het klembord
-  <kbd>c</kbd>: Uitchecken bij naam
-  <kbd>F</kbd>: Forceer checkout
-  <kbd>d</kbd>: Verwijder branch
-  <kbd>r</kbd>: Rebase branch
-  <kbd>M</kbd>: Merge in met huidige checked out branch
-  <kbd>f</kbd>: Fast-forward deze branch vanaf zijn upstream
-  <kbd>T</kbd>: Creëer tag
-  <kbd>g</kbd>: Bekijk reset opties
-  <kbd>R</kbd>: Hernoem branch
-  <kbd>u</kbd>: Set/Unset upstream
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Bekijk commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer branch name naar klembord |  |
+| `` i `` | Laat git-flow opties zien |  |
+| `` <space> `` | Uitchecken | Checkout selected item. |
+| `` n `` | Nieuwe branch |  |
+| `` o `` | Maak een pull-request |  |
+| `` O `` | Bekijk opties voor pull-aanvraag |  |
+| `` <c-y> `` | Kopieer de URL van het pull-verzoek naar het klembord |  |
+| `` c `` | Uitchecken bij naam | Checkout by name. In the input box you can enter '-' to switch to the last branch. |
+| `` F `` | Forceer checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
+| `` d `` | Delete | View delete options for local/remote branch. |
+| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
+| `` M `` | Merge in met huidige checked out branch | Merge selected branch into currently checked out branch. |
+| `` f `` | Fast-forward deze branch vanaf zijn upstream | Fast-forward selected branch from its upstream. |
+| `` T `` | Creëer tag |  |
+| `` s `` | Sort order |  |
+| `` g `` | Bekijk reset opties |  |
+| `` R `` | Hernoem branch |  |
+| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
+| `` <enter> `` | Bekijk commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Commit bericht
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Bevestig
-  <kbd>&lt;esc&gt;</kbd>: Sluiten
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Bevestig |  |
+| `` <esc> `` | Sluiten |  |
 
 ## Commit bestanden
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer de vastgelegde bestandsnaam naar het klembord
-  <kbd>c</kbd>: Bestand uitchecken
-  <kbd>d</kbd>: Uitsluit deze commit zijn veranderingen aan dit bestand
-  <kbd>o</kbd>: Open bestand
-  <kbd>e</kbd>: Verander bestand
-  <kbd>&lt;space&gt;</kbd>: Toggle bestand inbegrepen in patch
-  <kbd>a</kbd>: Toggle all files included in patch
-  <kbd>&lt;enter&gt;</kbd>: Enter bestand om geselecteerde regels toe te voegen aan de patch
-  <kbd>`</kbd>: Toggle bestandsboom weergave
-  <kbd>/</kbd>: Start met zoeken
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer de bestandsnaam naar het klembord |  |
+| `` c `` | Uitchecken | Bestand uitchecken |
+| `` d `` | Remove | Uitsluit deze commit zijn veranderingen aan dit bestand |
+| `` o `` | Open bestand | Open file in default application. |
+| `` e `` | Edit | Open file in external editor. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <space> `` | Toggle bestand inbegrepen in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | Enter bestand om geselecteerde regels toe te voegen aan de patch | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
+| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` / `` | Start met zoeken |  |
 
 ## Commits
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer commit SHA naar klembord
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (gekopieerde) commits selectie
-  <kbd>b</kbd>: View bisect options
-  <kbd>s</kbd>: Squash beneden
-  <kbd>f</kbd>: Fixup commit
-  <kbd>r</kbd>: Hernoem commit
-  <kbd>R</kbd>: Hernoem commit met editor
-  <kbd>d</kbd>: Verwijder commit
-  <kbd>e</kbd>: Wijzig commit
-  <kbd>p</kbd>: Kies commit (wanneer midden in rebase)
-  <kbd>F</kbd>: Creëer fixup commit
-  <kbd>S</kbd>: Squash bovenstaande commits
-  <kbd>&lt;c-j&gt;</kbd>: Verplaats commit 1 naar beneden
-  <kbd>&lt;c-k&gt;</kbd>: Verplaats commit 1 naar boven
-  <kbd>v</kbd>: Plak commits (cherry-pick)
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: Wijzig commit met staged veranderingen
-  <kbd>a</kbd>: Set/Reset commit author
-  <kbd>t</kbd>: Commit ongedaan maken
-  <kbd>T</kbd>: Tag commit
-  <kbd>&lt;c-l&gt;</kbd>: Open log menu
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Creëer nieuwe branch van commit
-  <kbd>g</kbd>: Bekijk reset opties
-  <kbd>c</kbd>: Kopieer commit (cherry-pick)
-  <kbd>C</kbd>: Kopieer commit reeks (cherry-pick)
-  <kbd>&lt;enter&gt;</kbd>: Bekijk gecommite bestanden
-  <kbd>/</kbd>: Start met zoeken
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer commit hash naar klembord |  |
+| `` <c-r> `` | Reset cherry-picked (gekopieerde) commits selectie |  |
+| `` b `` | View bisect options |  |
+| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
+| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to fixup, but the selected commit's message will be discarded. |
+| `` r `` | Hernoem commit | Reword the selected commit's message. |
+| `` R `` | Hernoem commit met editor |  |
+| `` d `` | Verwijder commit | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
+| `` e `` | Edit (start interactive rebase) | Wijzig commit |
+| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.
+If you would instead like to start an interactive rebase from the selected commit, press `e`. |
+| `` p `` | Pick | Kies commit (wanneer midden in rebase) |
+| `` F `` | Creëer fixup commit | Creëer fixup commit |
+| `` S `` | Apply fixup commits | Squash bovenstaande commits |
+| `` <c-j> `` | Verplaats commit 1 naar beneden |  |
+| `` <c-k> `` | Verplaats commit 1 naar boven |  |
+| `` V `` | Plak commits (cherry-pick) |  |
+| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
+| `` A `` | Amend | Wijzig commit met staged veranderingen |
+| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
+| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
+| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
+| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
+| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Open commit in browser |  |
+| `` n `` | Creëer nieuwe branch van commit |  |
+| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | Bekijk gecommite bestanden |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Start met zoeken |  |
 
 ## Menu
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Uitvoeren
-  <kbd>&lt;esc&gt;</kbd>: Sluiten
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Uitvoeren |  |
+| `` <esc> `` | Sluiten |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Mergen
 
-<pre>
-  <kbd>e</kbd>: Verander bestand
-  <kbd>o</kbd>: Open bestand
-  <kbd>&lt;left&gt;</kbd>: Selecteer voorgaand conflict
-  <kbd>&lt;right&gt;</kbd>: Selecteer volgende conflict
-  <kbd>&lt;up&gt;</kbd>: Selecteer bovenste hunk
-  <kbd>&lt;down&gt;</kbd>: Selecteer onderste hunk
-  <kbd>z</kbd>: Ongedaan maken
-  <kbd>M</kbd>: Open external merge tool (git mergetool)
-  <kbd>&lt;space&gt;</kbd>: Kies stuk
-  <kbd>b</kbd>: Kies beide stukken
-  <kbd>&lt;esc&gt;</kbd>: Ga terug naar het bestanden paneel
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Kies stuk |  |
+| `` b `` | Kies beide stukken |  |
+| `` <up> `` | Selecteer bovenste hunk |  |
+| `` <down> `` | Selecteer onderste hunk |  |
+| `` <left> `` | Selecteer voorgaand conflict |  |
+| `` <right> `` | Selecteer volgende conflict |  |
+| `` z `` | Ongedaan maken | Undo last merge conflict resolution. |
+| `` e `` | Verander bestand | Open file in external editor. |
+| `` o `` | Open bestand | Open file in default application. |
+| `` M `` | Open external merge tool | Run `git mergetool`. |
+| `` <esc> `` | Ga terug naar het bestanden paneel |  |
 
 ## Normaal
 
-<pre>
-  <kbd>mouse wheel down</kbd>: Scroll omlaag (fn+up)
-  <kbd>mouse wheel up</kbd>: Scroll omhoog (fn+down)
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | Scroll omlaag |  |
+| `` mouse wheel up (fn+down) `` | Scroll omhoog |  |
 
 ## Patch bouwen
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Selecteer de vorige hunk
-  <kbd>&lt;right&gt;</kbd>: Selecteer de volgende hunk
-  <kbd>v</kbd>: Toggle drag selecteer
-  <kbd>V</kbd>: Toggle drag selecteer
-  <kbd>a</kbd>: Toggle selecteer hunk
-  <kbd>&lt;c-o&gt;</kbd>: Copy the selected text to the clipboard
-  <kbd>o</kbd>: Open bestand
-  <kbd>e</kbd>: Verander bestand
-  <kbd>&lt;space&gt;</kbd>: Voeg toe/verwijder lijn(en) in patch
-  <kbd>&lt;esc&gt;</kbd>: Sluit lijn-bij-lijn modus
-  <kbd>/</kbd>: Start met zoeken
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Selecteer de vorige hunk |  |
+| `` <right> `` | Selecteer de volgende hunk |  |
+| `` v `` | Toggle drag selecteer |  |
+| `` a `` | Toggle selecteer hunk | Toggle hunk selection mode. |
+| `` <c-o> `` | Copy selected text to clipboard |  |
+| `` o `` | Open bestand | Open file in default application. |
+| `` e `` | Verander bestand | Open file in external editor. |
+| `` <space> `` | Voeg toe/verwijder lijn(en) in patch |  |
+| `` <esc> `` | Sluit lijn-bij-lijn modus |  |
+| `` / `` | Start met zoeken |  |
 
 ## Reflog
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer commit SHA naar klembord
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Creëer nieuwe branch van commit
-  <kbd>g</kbd>: Bekijk reset opties
-  <kbd>c</kbd>: Kopieer commit (cherry-pick)
-  <kbd>C</kbd>: Kopieer commit reeks (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (gekopieerde) commits selectie
-  <kbd>&lt;enter&gt;</kbd>: Bekijk commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer commit hash naar klembord |  |
+| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Open commit in browser |  |
+| `` n `` | Creëer nieuwe branch van commit |  |
+| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset cherry-picked (gekopieerde) commits selectie |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | Bekijk commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Remote branches
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer branch name naar klembord
-  <kbd>&lt;space&gt;</kbd>: Uitchecken
-  <kbd>n</kbd>: Nieuwe branch
-  <kbd>M</kbd>: Merge in met huidige checked out branch
-  <kbd>r</kbd>: Rebase branch
-  <kbd>d</kbd>: Verwijder branch
-  <kbd>u</kbd>: Stel in als upstream van uitgecheckte branch
-  <kbd>g</kbd>: Bekijk reset opties
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Bekijk commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer branch name naar klembord |  |
+| `` <space> `` | Uitchecken | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
+| `` n `` | Nieuwe branch |  |
+| `` M `` | Merge in met huidige checked out branch | Merge selected branch into currently checked out branch. |
+| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
+| `` d `` | Delete | Delete the remote branch from the remote. |
+| `` u `` | Set as upstream | Stel in als upstream van uitgecheckte branch |
+| `` s `` | Sort order |  |
+| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | Bekijk commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Remotes
 
-<pre>
-  <kbd>f</kbd>: Fetch remote
-  <kbd>n</kbd>: Voeg een nieuwe remote toe
-  <kbd>d</kbd>: Verwijder remote
-  <kbd>e</kbd>: Wijzig remote
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | View branches |  |
+| `` n `` | Voeg een nieuwe remote toe |  |
+| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
+| `` e `` | Edit | Wijzig remote |
+| `` f `` | Fetch | Fetch remote |
+| `` / `` | Filter the current view by text |  |
 
 ## Staging
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Selecteer de vorige hunk
-  <kbd>&lt;right&gt;</kbd>: Selecteer de volgende hunk
-  <kbd>v</kbd>: Toggle drag selecteer
-  <kbd>V</kbd>: Toggle drag selecteer
-  <kbd>a</kbd>: Toggle selecteer hunk
-  <kbd>&lt;c-o&gt;</kbd>: Copy the selected text to the clipboard
-  <kbd>o</kbd>: Open bestand
-  <kbd>e</kbd>: Verander bestand
-  <kbd>&lt;esc&gt;</kbd>: Ga terug naar het bestanden paneel
-  <kbd>&lt;tab&gt;</kbd>: Ga naar een ander paneel
-  <kbd>&lt;space&gt;</kbd>: Toggle lijnen staged / unstaged
-  <kbd>d</kbd>: Verwijdert change (git reset)
-  <kbd>E</kbd>: Edit hunk
-  <kbd>c</kbd>: Commit veranderingen
-  <kbd>w</kbd>: Commit veranderingen zonder pre-commit hook
-  <kbd>C</kbd>: Commit veranderingen met de git editor
-  <kbd>/</kbd>: Start met zoeken
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Selecteer de vorige hunk |  |
+| `` <right> `` | Selecteer de volgende hunk |  |
+| `` v `` | Toggle drag selecteer |  |
+| `` a `` | Toggle selecteer hunk | Toggle hunk selection mode. |
+| `` <c-o> `` | Copy selected text to clipboard |  |
+| `` <space> `` | Toggle staged | Toggle lijnen staged / unstaged |
+| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
+| `` o `` | Open bestand | Open file in default application. |
+| `` e `` | Verander bestand | Open file in external editor. |
+| `` <esc> `` | Ga terug naar het bestanden paneel |  |
+| `` <tab> `` | Ga naar een ander paneel | Switch to other view (staged/unstaged changes). |
+| `` E `` | Edit hunk | Edit selected hunk in external editor. |
+| `` c `` | Commit veranderingen | Commit staged changes. |
+| `` w `` | Commit veranderingen zonder pre-commit hook |  |
+| `` C `` | Commit veranderingen met de git editor |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | Start met zoeken |  |
 
 ## Stash
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Toepassen
-  <kbd>g</kbd>: Pop
-  <kbd>d</kbd>: Laten vallen
-  <kbd>n</kbd>: Nieuwe branch
-  <kbd>r</kbd>: Rename stash
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Bekijk gecommite bestanden
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Toepassen | Apply the stash entry to your working directory. |
+| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
+| `` d `` | Laten vallen | Remove the stash entry from the stash list. |
+| `` n `` | Nieuwe branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
+| `` r `` | Rename stash |  |
+| `` <enter> `` | Bekijk gecommite bestanden |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Status
 
-<pre>
-  <kbd>o</kbd>: Open config bestand
-  <kbd>e</kbd>: Verander config bestand
-  <kbd>u</kbd>: Check voor updates
-  <kbd>&lt;enter&gt;</kbd>: Wissel naar een recente repo
-  <kbd>a</kbd>: Alle logs van de branch laten zien
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | Open config bestand | Open file in default application. |
+| `` e `` | Verander config bestand | Open file in external editor. |
+| `` u `` | Check voor updates |  |
+| `` <enter> `` | Wissel naar een recente repo |  |
+| `` a `` | Alle logs van de branch laten zien |  |
 
 ## Sub-commits
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer commit SHA naar klembord
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Creëer nieuwe branch van commit
-  <kbd>g</kbd>: Bekijk reset opties
-  <kbd>c</kbd>: Kopieer commit (cherry-pick)
-  <kbd>C</kbd>: Kopieer commit reeks (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (gekopieerde) commits selectie
-  <kbd>&lt;enter&gt;</kbd>: Bekijk gecommite bestanden
-  <kbd>/</kbd>: Start met zoeken
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer commit hash naar klembord |  |
+| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Open commit in browser |  |
+| `` n `` | Creëer nieuwe branch van commit |  |
+| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Reset cherry-picked (gekopieerde) commits selectie |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | Bekijk gecommite bestanden |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Start met zoeken |  |
 
 ## Submodules
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Kopieer submodule naam naar klembord
-  <kbd>&lt;enter&gt;</kbd>: Enter submodule
-  <kbd>&lt;space&gt;</kbd>: Enter submodule
-  <kbd>d</kbd>: Remove submodule
-  <kbd>u</kbd>: Update submodule
-  <kbd>n</kbd>: Voeg nieuwe submodule toe
-  <kbd>e</kbd>: Update submodule URL
-  <kbd>i</kbd>: Initialiseer submodule
-  <kbd>b</kbd>: Bekijk bulk submodule opties
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopieer submodule naam naar klembord |  |
+| `` <enter> `` | Enter | Enter submodule |
+| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
+| `` u `` | Update | Update selected submodule. |
+| `` n `` | Voeg nieuwe submodule toe |  |
+| `` e `` | Update submodule URL |  |
+| `` i `` | Initialize | Initialiseer submodule |
+| `` b `` | Bekijk bulk submodule opties |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Tags
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Uitchecken
-  <kbd>d</kbd>: Verwijder tag
-  <kbd>P</kbd>: Push tag
-  <kbd>n</kbd>: Creëer tag
-  <kbd>g</kbd>: Bekijk reset opties
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Bekijk commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Uitchecken | Checkout the selected tag tag as a detached HEAD. |
+| `` n `` | Creëer tag | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
+| `` d `` | Delete | View delete options for local/remote tag. |
+| `` P `` | Push tag | Push the selected tag to a remote. You'll be prompted to select a remote. |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | Bekijk commits |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Worktrees
 
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | New worktree |  |
+| `` <space> `` | Switch | Switch to the selected worktree. |
+| `` o `` | Open in editor |  |
+| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
+| `` / `` | Filter the current view by text |  |

docs/keybindings/Keybindings_pl.md

@@ -1,353 +1,364 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
-# Lazygit Keybindings
+# Lazygit Skróty klawiszowe
 
-_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
+_Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
 
-## Globalne
+## Globalne skróty klawiszowe
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: Switch to a recent repo
-  <kbd>&lt;pgup&gt;</kbd>: Scroll up main panel (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: Scroll down main panel (fn+down/shift+j)
-  <kbd>@</kbd>: Open command log menu
-  <kbd>}</kbd>: Increase the size of the context shown around changes in the diff view
-  <kbd>{</kbd>: Decrease the size of the context shown around changes in the diff view
-  <kbd>:</kbd>: Wykonaj własną komendę
-  <kbd>&lt;c-p&gt;</kbd>: View custom patch options
-  <kbd>m</kbd>: Widok scalenia/opcje zmiany bazy
-  <kbd>R</kbd>: Odśwież
-  <kbd>+</kbd>: Next screen mode (normal/half/fullscreen)
-  <kbd>_</kbd>: Prev screen mode
-  <kbd>?</kbd>: Open menu
-  <kbd>&lt;c-s&gt;</kbd>: View filter-by-path options
-  <kbd>W</kbd>: Open diff menu
-  <kbd>&lt;c-e&gt;</kbd>: Open diff menu
-  <kbd>&lt;c-w&gt;</kbd>: Toggle whether or not whitespace changes are shown in the diff view
-  <kbd>z</kbd>: Undo
-  <kbd>&lt;c-z&gt;</kbd>: Redo
-  <kbd>P</kbd>: Push
-  <kbd>p</kbd>: Pull
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | Przełącz na ostatnie repozytorium |  |
+| `` <pgup> (fn+up/shift+k) `` | Przewiń główne okno w górę |  |
+| `` <pgdown> (fn+down/shift+j) `` | Przewiń główne okno w dół |  |
+| `` @ `` | Pokaż opcje dziennika poleceń | Pokaż opcje dla dziennika poleceń, np. pokazywanie/ukrywanie dziennika poleceń i skupienie na dzienniku poleceń. |
+| `` P `` | Wypchnij | Wypchnij bieżącą gałąź do jej gałęzi nadrzędnej. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
+| `` p `` | Pociągnij | Pociągnij zmiany z zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
+| `` } `` | Zwiększ rozmiar kontekstu w widoku różnic | Zwiększ ilość kontekstu pokazywanego wokół zmian w widoku różnic. |
+| `` { `` | Zmniejsz rozmiar kontekstu w widoku różnic | Zmniejsz ilość kontekstu pokazywanego wokół zmian w widoku różnic. |
+| `` : `` | Wykonaj polecenie niestandardowe | Wyświetl monit, w którym możesz wprowadzić polecenie powłoki do wykonania. Nie należy mylić z wcześniej skonfigurowanymi poleceniami niestandardowymi. |
+| `` <c-p> `` | Wyświetl opcje niestandardowej łatki |  |
+| `` m `` | Pokaż opcje scalania/rebase | Pokaż opcje do przerwania/kontynuowania/pominięcia bieżącego scalania/rebase. |
+| `` R `` | Odśwież | Odśwież stan git (tj. uruchom `git status`, `git branch`, itp. w tle, aby zaktualizować zawartość paneli). To nie uruchamia `git fetch`. |
+| `` + `` | Następny tryb ekranu (normalny/półpełny/pełnoekranowy) |  |
+| `` _ `` | Poprzedni tryb ekranu |  |
+| `` ? `` | Otwórz menu przypisań klawiszy |  |
+| `` <c-s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
+| `` W `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
+| `` <c-e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
+| `` q `` | Wyjdź |  |
+| `` <esc> `` | Anuluj |  |
+| `` <c-w> `` | Przełącz białe znaki | Przełącz czy zmiany białych znaków są pokazywane w widoku różnic. |
+| `` z `` | Cofnij | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby cofnąć ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
+| `` <c-z> `` | Ponów | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby ponowić ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
 
-## List panel navigation
+## Nawigacja panelu listy
 
-<pre>
-  <kbd>,</kbd>: Previous page
-  <kbd>.</kbd>: Next page
-  <kbd>&lt;</kbd>: Scroll to top
-  <kbd>&gt;</kbd>: Scroll to bottom
-  <kbd>/</kbd>: Search the current view by text
-  <kbd>H</kbd>: Scroll left
-  <kbd>L</kbd>: Scroll right
-  <kbd>]</kbd>: Next tab
-  <kbd>[</kbd>: Previous tab
-</pre>
-
-## Commit summary
-
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Potwierdź
-  <kbd>&lt;esc&gt;</kbd>: Zamknij
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | Poprzednia strona |  |
+| `` . `` | Następna strona |  |
+| `` < `` | Przewiń do góry |  |
+| `` > `` | Przewiń do dołu |  |
+| `` v `` | Przełącz zaznaczenie zakresu |  |
+| `` <s-down> `` | Zaznacz zakres w dół |  |
+| `` <s-up> `` | Zaznacz zakres w górę |  |
+| `` / `` | Szukaj w bieżącym widoku po tekście |  |
+| `` H `` | Przewiń w lewo |  |
+| `` L `` | Przewiń w prawo |  |
+| `` ] `` | Następna zakładka |  |
+| `` [ `` | Poprzednia zakładka |  |
 
 ## Commity
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy commit SHA to clipboard
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>b</kbd>: View bisect options
-  <kbd>s</kbd>: Ściśnij
-  <kbd>f</kbd>: Napraw commit
-  <kbd>r</kbd>: Zmień nazwę commita
-  <kbd>R</kbd>: Zmień nazwę commita w edytorze
-  <kbd>d</kbd>: Usuń commit
-  <kbd>e</kbd>: Edytuj commit
-  <kbd>p</kbd>: Wybierz commit (podczas zmiany bazy)
-  <kbd>F</kbd>: Utwórz commit naprawczy dla tego commita
-  <kbd>S</kbd>: Spłaszcz wszystkie commity naprawcze powyżej zaznaczonych commitów (autosquash)
-  <kbd>&lt;c-j&gt;</kbd>: Przenieś commit 1 w dół
-  <kbd>&lt;c-k&gt;</kbd>: Przenieś commit 1 w górę
-  <kbd>v</kbd>: Wklej commity (przebieranie)
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: Popraw commit zmianami z poczekalni
-  <kbd>a</kbd>: Set/Reset commit author
-  <kbd>t</kbd>: Odwróć commit
-  <kbd>T</kbd>: Tag commit
-  <kbd>&lt;c-l&gt;</kbd>: Open log menu
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Create new branch off of commit
-  <kbd>g</kbd>: Wyświetl opcje resetu
-  <kbd>c</kbd>: Kopiuj commit (przebieranie)
-  <kbd>C</kbd>: Kopiuj zakres commitów (przebieranie)
-  <kbd>&lt;enter&gt;</kbd>: Przeglądaj pliki commita
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj hash commita do schowka |  |
+| `` <c-r> `` | Resetuj wybrane (cherry-picked) commity |  |
+| `` b `` | Zobacz opcje bisect |  |
+| `` s `` | Scal | Scal wybrany commit z commitami poniżej. Wiadomość wybranego commita zostanie dołączona do commita poniżej. |
+| `` f `` | Poprawka | Włącz wybrany commit do commita poniżej. Podobnie do fixup, ale wiadomość wybranego commita zostanie odrzucona. |
+| `` r `` | Przeformułuj | Przeformułuj wiadomość wybranego commita. |
+| `` R `` | Przeformułuj za pomocą edytora |  |
+| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą rebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
+| `` e `` | Edytuj (rozpocznij interaktywne rebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne rebazowanie od wybranego commita. Podczas trwania rebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji rebazowania, rebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
+| `` i `` | Rozpocznij interaktywny rebase | Rozpocznij interaktywny rebase dla commitów na twoim branchu. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównego brancha.
+Jeśli chcesz zamiast tego rozpocząć interaktywny rebase od wybranego commita, naciśnij `e`. |
+| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas rebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji rebazowania. |
+| `` F `` | Utwórz commit fixup | Utwórz commit 'fixup!' dla wybranego commita. Później możesz nacisnąć `S` na tym samym commicie, aby zastosować wszystkie powyższe commity fixup. |
+| `` S `` | Zastosuj commity fixup | Scal wszystkie commity 'fixup!', albo powyżej wybranego commita, albo wszystkie w bieżącej gałęzi (autosquash). |
+| `` <c-j> `` | Przesuń commit w dół |  |
+| `` <c-k> `` | Przesuń commit w górę |  |
+| `` V `` | Wklej (cherry-pick) |  |
+| `` B `` | Oznacz jako bazowy commit dla rebase | Wybierz bazowy commit dla następnego rebase. Kiedy robisz rebase na branch, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
+| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą rebazowania. |
+| `` a `` | Popraw atrybut commita | Ustaw/Resetuj autora commita lub ustaw współautora. |
+| `` t `` | Cofnij | Utwórz commit cofający dla wybranego commita, który stosuje zmiany wybranego commita w odwrotnej kolejności. |
+| `` T `` | Otaguj commit | Utwórz nowy tag wskazujący na wybrany commit. Zostaniesz poproszony o wprowadzenie nazwy tagu i opcjonalnego opisu. |
+| `` <c-l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
+| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
+| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
+| `` o `` | Otwórz commit w przeglądarce |  |
+| `` n `` | Utwórz nową gałąź z commita |  |
+| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
+| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
+| `` <c-t> `` | Otwórz zewnętrzne narzędzie różnic (git difftool) |  |
+| `` <enter> `` | Wyświetl pliki |  |
+| `` w `` | Zobacz opcje drzewa pracy |  |
+| `` / `` | Szukaj w bieżącym widoku po tekście |  |
 
-## Confirmation panel
+## Drzewa pracy
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Potwierdź
-  <kbd>&lt;esc&gt;</kbd>: Zamknij
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | Nowe drzewo pracy |  |
+| `` <space> `` | Przełącz | Przełącz do wybranego drzewa pracy. |
+| `` o `` | Otwórz w edytorze |  |
+| `` d `` | Usuń | Usuń wybrane drzewo pracy. To usunie zarówno katalog drzewa pracy, jak i metadane o drzewie pracy w katalogu .git. |
+| `` / `` | Filtruj bieżący widok po tekście |  |
 
-## Local branches
+## Główny panel (budowanie łatki)
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy branch name to clipboard
-  <kbd>i</kbd>: Show git-flow options
-  <kbd>&lt;space&gt;</kbd>: Przełącz
-  <kbd>n</kbd>: Nowa gałąź
-  <kbd>o</kbd>: Utwórz żądanie pobrania
-  <kbd>O</kbd>: Utwórz opcje żądania ściągnięcia
-  <kbd>&lt;c-y&gt;</kbd>: Skopiuj adres URL żądania pobrania do schowka
-  <kbd>c</kbd>: Przełącz używając nazwy
-  <kbd>F</kbd>: Wymuś przełączenie
-  <kbd>d</kbd>: Usuń gałąź
-  <kbd>r</kbd>: Zmiana bazy gałęzi
-  <kbd>M</kbd>: Scal do obecnej gałęzi
-  <kbd>f</kbd>: Fast-forward this branch from its upstream
-  <kbd>T</kbd>: Create tag
-  <kbd>g</kbd>: Wyświetl opcje resetu
-  <kbd>R</kbd>: Rename branch
-  <kbd>u</kbd>: Set/Unset upstream
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Idź do poprzedniego fragmentu |  |
+| `` <right> `` | Idź do następnego fragmentu |  |
+| `` v `` | Przełącz zaznaczenie zakresu |  |
+| `` a `` | Zaznacz fragment | Przełącz tryb zaznaczania fragmentu. |
+| `` <c-o> `` | Kopiuj zaznaczony tekst do schowka |  |
+| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
+| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
+| `` <space> `` | Przełącz linie w łatce |  |
+| `` <esc> `` | Wyjdź z budowniczego niestandardowej łatki |  |
+| `` / `` | Szukaj w bieżącym widoku po tekście |  |
 
-## Main panel (patch building)
+## Lokalne gałęzie
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Poprzedni kawałek
-  <kbd>&lt;right&gt;</kbd>: Następny kawałek
-  <kbd>v</kbd>: Toggle drag select
-  <kbd>V</kbd>: Toggle drag select
-  <kbd>a</kbd>: Toggle select hunk
-  <kbd>&lt;c-o&gt;</kbd>: Copy the selected text to the clipboard
-  <kbd>o</kbd>: Otwórz plik
-  <kbd>e</kbd>: Edytuj plik
-  <kbd>&lt;space&gt;</kbd>: Add/Remove line(s) to patch
-  <kbd>&lt;esc&gt;</kbd>: Wyście z trybu "linia po linii"
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj nazwę gałęzi do schowka |  |
+| `` i `` | Pokaż opcje git-flow |  |
+| `` <space> `` | Przełącz | Przełącz wybrany element. |
+| `` n `` | Nowa gałąź |  |
+| `` o `` | Utwórz żądanie ściągnięcia |  |
+| `` O `` | Zobacz opcje tworzenia pull requesta |  |
+| `` <c-y> `` | Kopiuj adres URL żądania ściągnięcia do schowka |  |
+| `` c `` | Przełącz według nazwy | Przełącz według nazwy. W polu wprowadzania możesz wpisać '-' aby przełączyć się na ostatnią gałąź. |
+| `` F `` | Wymuś przełączenie | Wymuś przełączenie wybranej gałęzi. To spowoduje odrzucenie wszystkich lokalnych zmian w drzewie roboczym przed przełączeniem na wybraną gałąź. |
+| `` d `` | Usuń | Wyświetl opcje usuwania lokalnej/odległej gałęzi. |
+| `` r `` | Przebazuj | Przebazuj przełączoną gałąź na wybraną gałąź. |
+| `` M `` | Scal | Scal wybraną gałąź z aktualnie sprawdzoną gałęzią. |
+| `` f `` | Szybkie przewijanie | Szybkie przewijanie wybranej gałęzi z jej źródła. |
+| `` T `` | Nowy tag |  |
+| `` s `` | Kolejność sortowania |  |
+| `` g `` | Reset |  |
+| `` R `` | Zmień nazwę gałęzi |  |
+| `` u `` | Pokaż opcje upstream | Pokaż opcje dotyczące upstream gałęzi, np. ustawianie/usuwanie upstream i resetowanie do upstream. |
+| `` <enter> `` | Pokaż commity |  |
+| `` w `` | Zobacz opcje drzewa pracy |  |
+| `` / `` | Filtruj bieżący widok po tekście |  |
 
 ## Menu
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Wykonaj
-  <kbd>&lt;esc&gt;</kbd>: Zamknij
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Wykonaj |  |
+| `` <esc> `` | Zamknij |  |
+| `` / `` | Filtruj bieżący widok po tekście |  |
+
+## Panel główny (normalny)
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | Przewiń w dół |  |
+| `` mouse wheel up (fn+down) `` | Przewiń w górę |  |
+
+## Panel główny (scalanie)
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Wybierz fragment |  |
+| `` b `` | Wybierz wszystkie fragmenty |  |
+| `` <up> `` | Poprzedni fragment |  |
+| `` <down> `` | Następny fragment |  |
+| `` <left> `` | Poprzedni konflikt |  |
+| `` <right> `` | Następny konflikt |  |
+| `` z `` | Cofnij | Cofnij ostatnie rozwiązanie konfliktu scalania. |
+| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
+| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
+| `` M `` | Otwórz zewnętrzne narzędzie scalania | Uruchom `git mergetool`. |
+| `` <esc> `` | Wróć do panelu plików |  |
+
+## Panel główny (zatwierdzanie)
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Idź do poprzedniego fragmentu |  |
+| `` <right> `` | Idź do następnego fragmentu |  |
+| `` v `` | Przełącz zaznaczenie zakresu |  |
+| `` a `` | Zaznacz fragment | Przełącz tryb zaznaczania fragmentu. |
+| `` <c-o> `` | Kopiuj zaznaczony tekst do schowka |  |
+| `` <space> `` | Zatwierdź | Przełącz zaznaczenie zatwierdzone/niezatwierdzone. |
+| `` d `` | Odrzuć | Gdy zaznaczona jest niezatwierdzona zmiana, odrzuć ją używając `git reset`. Gdy zaznaczona jest zatwierdzona zmiana, cofnij zatwierdzenie. |
+| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
+| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
+| `` <esc> `` | Wróć do panelu plików |  |
+| `` <tab> `` | Przełącz widok | Przełącz na inny widok (zatwierdzone/niezatwierdzone zmiany). |
+| `` E `` | Edytuj fragment | Edytuj wybrany fragment w zewnętrznym edytorze. |
+| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
+| `` w `` | Zatwierdź zmiany bez hooka pre-commit |  |
+| `` C `` | Zatwierdź zmiany używając edytora git |  |
+| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | Szukaj w bieżącym widoku po tekście |  |
+
+## Panel potwierdzenia
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Potwierdź |  |
+| `` <esc> `` | Zamknij/Anuluj |  |
 
 ## Pliki
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy the file name to the clipboard
-  <kbd>d</kbd>: Pokaż opcje porzucania zmian
-  <kbd>&lt;space&gt;</kbd>: Przełącz stan poczekalni
-  <kbd>&lt;c-b&gt;</kbd>: Filter files by status
-  <kbd>c</kbd>: Zatwierdź zmiany
-  <kbd>w</kbd>: Zatwierdź zmiany bez skryptu pre-commit
-  <kbd>A</kbd>: Zmień ostatni commit
-  <kbd>C</kbd>: Zatwierdź zmiany używając edytora
-  <kbd>e</kbd>: Edytuj plik
-  <kbd>o</kbd>: Otwórz plik
-  <kbd>i</kbd>: Ignore or exclude file
-  <kbd>r</kbd>: Odśwież pliki
-  <kbd>s</kbd>: Przechowaj zmiany
-  <kbd>S</kbd>: Wyświetl opcje schowka
-  <kbd>a</kbd>: Przełącz stan poczekalni wszystkich
-  <kbd>&lt;enter&gt;</kbd>: Zatwierdź pojedyncze linie
-  <kbd>g</kbd>: View upstream reset options
-  <kbd>D</kbd>: Wyświetl opcje resetu
-  <kbd>`</kbd>: Toggle file tree view
-  <kbd>M</kbd>: Open external merge tool (git mergetool)
-  <kbd>f</kbd>: Pobierz
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj ścieżkę do schowka |  |
+| `` <space> `` | Zatwierdź | Przełącz zatwierdzenie dla wybranego pliku. |
+| `` <c-b> `` | Filtruj pliki według statusu |  |
+| `` y `` | Kopiuj do schowka |  |
+| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
+| `` w `` | Zatwierdź zmiany bez hooka pre-commit |  |
+| `` A `` | Popraw ostatni commit |  |
+| `` C `` | Zatwierdź zmiany używając edytora git |  |
+| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
+| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
+| `` i `` | Ignoruj lub wyklucz plik |  |
+| `` r `` | Odśwież pliki |  |
+| `` s `` | Schowaj | Schowaj wszystkie zmiany. Dla innych wariantów schowania, użyj klawisza wyświetlania opcji schowka. |
+| `` S `` | Wyświetl opcje schowka | Wyświetl opcje schowka (np. schowaj wszystko, schowaj zatwierdzone, schowaj niezatwierdzone). |
+| `` a `` | Zatwierdź wszystko | Przełącz zatwierdzenie/odznaczenie dla wszystkich plików w drzewie roboczym. |
+| `` <enter> `` | Zatwierdź linie / Zwiń katalog | Jeśli wybrany element jest plikiem, skup się na widoku zatwierdzania, aby móc zatwierdzać poszczególne fragmenty/linie. Jeśli wybrany element jest katalogiem, zwiń/rozwiń go. |
+| `` d `` | Odrzuć | Wyświetl opcje odrzucania zmian w wybranym pliku. |
+| `` g `` | Pokaż opcje resetowania do upstream |  |
+| `` D `` | Reset | Wyświetl opcje resetu dla drzewa roboczego (np. zniszczenie drzewa roboczego). |
+| `` ` `` | Przełącz widok drzewa plików | Przełącz widok plików między płaskim a drzewem. Płaski układ pokazuje wszystkie ścieżki plików na jednej liście, układ drzewa grupuje pliki według katalogów. |
+| `` <c-t> `` | Otwórz zewnętrzne narzędzie różnic (git difftool) |  |
+| `` M `` | Otwórz zewnętrzne narzędzie scalania | Uruchom `git mergetool`. |
+| `` f `` | Pobierz | Pobierz zmiany ze zdalnego serwera. |
+| `` / `` | Szukaj w bieżącym widoku po tekście |  |
 
 ## Pliki commita
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy the committed file name to the clipboard
-  <kbd>c</kbd>: Plik wybierania
-  <kbd>d</kbd>: Porzuć zmiany commita dla tego pliku
-  <kbd>o</kbd>: Otwórz plik
-  <kbd>e</kbd>: Edytuj plik
-  <kbd>&lt;space&gt;</kbd>: Toggle file included in patch
-  <kbd>a</kbd>: Toggle all files included in patch
-  <kbd>&lt;enter&gt;</kbd>: Enter file to add selected lines to the patch (or toggle directory collapsed)
-  <kbd>`</kbd>: Toggle file tree view
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj ścieżkę do schowka |  |
+| `` c `` | Przełącz | Przełącz plik. Zastępuje plik w twoim drzewie roboczym wersją z wybranego commita. |
+| `` d `` | Usuń | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywny rebase w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
+| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
+| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
+| `` <c-t> `` | Otwórz zewnętrzne narzędzie różnic (git difftool) |  |
+| `` <space> `` | Przełącz plik włączony w łatkę | Przełącz, czy plik jest włączony w niestandardową łatkę. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | Przełącz wszystkie pliki | Dodaj/usuń wszystkie pliki commita do niestandardowej łatki. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | Wejdź do pliku / Przełącz zwiń katalog | Jeśli plik jest wybrany, wejdź do pliku, aby móc dodawać/usuwać poszczególne linie do niestandardowej łatki. Jeśli wybrany jest katalog, przełącz katalog. |
+| `` ` `` | Przełącz widok drzewa plików | Przełącz widok plików między płaskim a drzewem. Płaski układ pokazuje wszystkie ścieżki plików na jednej liście, układ drzewa grupuje pliki według katalogów. |
+| `` / `` | Szukaj w bieżącym widoku po tekście |  |
 
-## Poczekalnia
+## Podsumowanie commita
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Poprzedni kawałek
-  <kbd>&lt;right&gt;</kbd>: Następny kawałek
-  <kbd>v</kbd>: Toggle drag select
-  <kbd>V</kbd>: Toggle drag select
-  <kbd>a</kbd>: Toggle select hunk
-  <kbd>&lt;c-o&gt;</kbd>: Copy the selected text to the clipboard
-  <kbd>o</kbd>: Otwórz plik
-  <kbd>e</kbd>: Edytuj plik
-  <kbd>&lt;esc&gt;</kbd>: Wróć do panelu plików
-  <kbd>&lt;tab&gt;</kbd>: Switch to other panel (staged/unstaged changes)
-  <kbd>&lt;space&gt;</kbd>: Toggle line staged / unstaged
-  <kbd>d</kbd>: Discard change (git reset)
-  <kbd>E</kbd>: Edit hunk
-  <kbd>c</kbd>: Zatwierdź zmiany
-  <kbd>w</kbd>: Zatwierdź zmiany bez skryptu pre-commit
-  <kbd>C</kbd>: Zatwierdź zmiany używając edytora
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Potwierdź |  |
+| `` <esc> `` | Zamknij |  |
 
 ## Reflog
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy commit SHA to clipboard
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Create new branch off of commit
-  <kbd>g</kbd>: Wyświetl opcje resetu
-  <kbd>c</kbd>: Kopiuj commit (przebieranie)
-  <kbd>C</kbd>: Kopiuj zakres commitów (przebieranie)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
-
-## Remote branches
-
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy branch name to clipboard
-  <kbd>&lt;space&gt;</kbd>: Przełącz
-  <kbd>n</kbd>: Nowa gałąź
-  <kbd>M</kbd>: Scal do obecnej gałęzi
-  <kbd>r</kbd>: Zmiana bazy gałęzi
-  <kbd>d</kbd>: Usuń gałąź
-  <kbd>u</kbd>: Set as upstream of checked-out branch
-  <kbd>g</kbd>: Wyświetl opcje resetu
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
-
-## Remotes
-
-<pre>
-  <kbd>f</kbd>: Fetch remote
-  <kbd>n</kbd>: Add new remote
-  <kbd>d</kbd>: Remove remote
-  <kbd>e</kbd>: Edit remote
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
-
-## Scalanie
-
-<pre>
-  <kbd>e</kbd>: Edytuj plik
-  <kbd>o</kbd>: Otwórz plik
-  <kbd>&lt;left&gt;</kbd>: Poprzedni konflikt
-  <kbd>&lt;right&gt;</kbd>: Następny konflikt
-  <kbd>&lt;up&gt;</kbd>: Wybierz poprzedni kawałek
-  <kbd>&lt;down&gt;</kbd>: Wybierz następny kawałek
-  <kbd>z</kbd>: Cofnij
-  <kbd>M</kbd>: Open external merge tool (git mergetool)
-  <kbd>&lt;space&gt;</kbd>: Wybierz kawałek
-  <kbd>b</kbd>: Wybierz oba kawałki
-  <kbd>&lt;esc&gt;</kbd>: Wróć do panelu plików
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj hash commita do schowka |  |
+| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
+| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
+| `` o `` | Otwórz commit w przeglądarce |  |
+| `` n `` | Utwórz nową gałąź z commita |  |
+| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
+| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
+| `` <c-r> `` | Resetuj wybrane (cherry-picked) commity |  |
+| `` <c-t> `` | Otwórz zewnętrzne narzędzie różnic (git difftool) |  |
+| `` <enter> `` | Pokaż commity |  |
+| `` w `` | Zobacz opcje drzewa pracy |  |
+| `` / `` | Filtruj bieżący widok po tekście |  |
 
 ## Schowek
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Zastosuj
-  <kbd>g</kbd>: Wyciągnij
-  <kbd>d</kbd>: Porzuć
-  <kbd>n</kbd>: Nowa gałąź
-  <kbd>r</kbd>: Rename stash
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Przeglądaj pliki commita
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Zastosuj | Zastosuj wpis schowka do katalogu roboczego. |
+| `` g `` | Wyciągnij | Zastosuj wpis schowka do katalogu roboczego i usuń wpis schowka. |
+| `` d `` | Usuń | Usuń wpis schowka z listy schowka. |
+| `` n `` | Nowa gałąź | Utwórz nową gałąź z wybranego wpisu schowka. Działa poprzez przełączenie git na commit, na którym wpis schowka został utworzony, tworzenie nowej gałęzi z tego commita, a następnie zastosowanie wpisu schowka do nowej gałęzi jako dodatkowego commita. |
+| `` r `` | Zmień nazwę schowka |  |
+| `` <enter> `` | Wyświetl pliki |  |
+| `` w `` | Zobacz opcje drzewa pracy |  |
+| `` / `` | Filtruj bieżący widok po tekście |  |
 
 ## Status
 
-<pre>
-  <kbd>o</kbd>: Otwórz konfigurację
-  <kbd>e</kbd>: Edytuj konfigurację
-  <kbd>u</kbd>: Sprawdź aktualizacje
-  <kbd>&lt;enter&gt;</kbd>: Switch to a recent repo
-  <kbd>a</kbd>: Pokaż wszystkie logi gałęzi
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | Otwórz plik konfiguracyjny | Otwórz plik w domyślnej aplikacji. |
+| `` e `` | Edytuj plik konfiguracyjny | Otwórz plik w zewnętrznym edytorze. |
+| `` u `` | Sprawdź aktualizacje |  |
+| `` <enter> `` | Przełącz na ostatnie repozytorium |  |
+| `` a `` | Pokaż wszystkie gałęzie w logach |  |
 
-## Sub-commits
+## Sub-commity
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy commit SHA to clipboard
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Checkout commit
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: Open commit in browser
-  <kbd>n</kbd>: Create new branch off of commit
-  <kbd>g</kbd>: Wyświetl opcje resetu
-  <kbd>c</kbd>: Kopiuj commit (przebieranie)
-  <kbd>C</kbd>: Kopiuj zakres commitów (przebieranie)
-  <kbd>&lt;c-r&gt;</kbd>: Reset cherry-picked (copied) commits selection
-  <kbd>&lt;enter&gt;</kbd>: Przeglądaj pliki commita
-  <kbd>/</kbd>: Search the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj hash commita do schowka |  |
+| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
+| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
+| `` o `` | Otwórz commit w przeglądarce |  |
+| `` n `` | Utwórz nową gałąź z commita |  |
+| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
+| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
+| `` <c-r> `` | Resetuj wybrane (cherry-picked) commity |  |
+| `` <c-t> `` | Otwórz zewnętrzne narzędzie różnic (git difftool) |  |
+| `` <enter> `` | Wyświetl pliki |  |
+| `` w `` | Zobacz opcje drzewa pracy |  |
+| `` / `` | Szukaj w bieżącym widoku po tekście |  |
 
-## Submodules
+## Submoduły
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Copy submodule name to clipboard
-  <kbd>&lt;enter&gt;</kbd>: Enter submodule
-  <kbd>&lt;space&gt;</kbd>: Enter submodule
-  <kbd>d</kbd>: Remove submodule
-  <kbd>u</kbd>: Update submodule
-  <kbd>n</kbd>: Add new submodule
-  <kbd>e</kbd>: Update submodule URL
-  <kbd>i</kbd>: Initialize submodule
-  <kbd>b</kbd>: View bulk submodule options
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj nazwę submodułu do schowka |  |
+| `` <enter> `` | Wejdź | Wejdź do submodułu. Po wejściu do submodułu możesz nacisnąć `<esc>`, aby wrócić do repozytorium nadrzędnego. |
+| `` d `` | Usuń | Usuń wybrany submoduł i odpowiadający mu katalog. |
+| `` u `` | Aktualizuj | Aktualizuj wybrany submoduł. |
+| `` n `` | Nowy submoduł |  |
+| `` e `` | Zaktualizuj URL submodułu |  |
+| `` i `` | Zainicjuj | Zainicjuj wybrany submoduł, aby przygotować do pobrania. Prawdopodobnie chcesz to kontynuować, wywołując akcję 'update', aby pobrać submoduł. |
+| `` b `` | Pokaż opcje masowych operacji na submodułach |  |
+| `` / `` | Filtruj bieżący widok po tekście |  |
 
-## Tags
+## Tagi
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Przełącz
-  <kbd>d</kbd>: Delete tag
-  <kbd>P</kbd>: Push tag
-  <kbd>n</kbd>: Create tag
-  <kbd>g</kbd>: Wyświetl opcje resetu
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: View commits
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Przełącz | Przełącz wybrany tag jako odłączoną głowę (detached HEAD). |
+| `` n `` | Nowy tag | Utwórz nowy tag z bieżącego commita. Zostaniesz poproszony o wprowadzenie nazwy tagu i opcjonalnego opisu. |
+| `` d `` | Usuń | Wyświetl opcje usuwania lokalnego/odległego tagu. |
+| `` P `` | Wyślij tag | Wyślij wybrany tag do zdalnego. Zostaniesz poproszony o wybranie zdalnego. |
+| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
+| `` <enter> `` | Pokaż commity |  |
+| `` w `` | Zobacz opcje drzewa pracy |  |
+| `` / `` | Filtruj bieżący widok po tekście |  |
 
-## Worktrees
+## Zdalne
 
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Wyświetl gałęzie |  |
+| `` n `` | Nowy zdalny |  |
+| `` d `` | Usuń | Usuń wybrany zdalny. Wszelkie lokalne gałęzie śledzące gałąź zdalną z tego zdalnego nie zostaną dotknięte. |
+| `` e `` | Edytuj | Edytuj nazwę lub URL wybranego zdalnego. |
+| `` f `` | Pobierz | Pobierz aktualizacje z zdalnego repozytorium. Pobiera nowe commity i gałęzie bez scalania ich z lokalnymi gałęziami. |
+| `` / `` | Filtruj bieżący widok po tekście |  |
 
-## Zwykłe
+## Zdalne gałęzie
 
-<pre>
-  <kbd>mouse wheel down</kbd>: Przewiń w dół (fn+up)
-  <kbd>mouse wheel up</kbd>: Przewiń w górę (fn+down)
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Kopiuj nazwę gałęzi do schowka |  |
+| `` <space> `` | Przełącz | Przełącz na nową lokalną gałąź na podstawie wybranej gałęzi zdalnej. Nowa gałąź będzie śledzić gałąź zdalną. |
+| `` n `` | Nowa gałąź |  |
+| `` M `` | Scal | Scal wybraną gałąź z aktualnie sprawdzoną gałęzią. |
+| `` r `` | Przebazuj | Przebazuj przełączoną gałąź na wybraną gałąź. |
+| `` d `` | Usuń | Usuń gałąź zdalną ze zdalnego. |
+| `` u `` | Ustaw jako upstream | Ustaw wybraną gałąź zdalną jako upstream sprawdzonej gałęzi. |
+| `` s `` | Kolejność sortowania |  |
+| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
+| `` <enter> `` | Pokaż commity |  |
+| `` w `` | Zobacz opcje drzewa pracy |  |
+| `` / `` | Filtruj bieżący widok po tekście |  |

docs/keybindings/Keybindings_ru.md

@@ -1,4 +1,4 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
 # Lazygit Связки клавиш
 
@@ -6,348 +6,359 @@ _Связки клавиш_
 
 ## Глобальные сочетания клавиш
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: Переключиться на последний репозиторий
-  <kbd>&lt;pgup&gt;</kbd>: Прокрутить вверх главную панель (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: Прокрутить вниз главную панель (fn+down/shift+j)
-  <kbd>@</kbd>: Открыть меню журнала команд
-  <kbd>}</kbd>: Увеличить размер контекста, отображаемого вокруг изменений в просмотрщике сравнении
-  <kbd>{</kbd>: Уменьшите размер контекста, отображаемого вокруг изменений в просмотрщике сравнении
-  <kbd>:</kbd>: Выполнить пользовательскую команду
-  <kbd>&lt;c-p&gt;</kbd>: Просмотреть пользовательские параметры патча
-  <kbd>m</kbd>: Просмотреть параметры слияния/перебазирования
-  <kbd>R</kbd>: Обновить
-  <kbd>+</kbd>: Следующий режим экрана (нормальный/полуэкранный/полноэкранный)
-  <kbd>_</kbd>: Предыдущий режим экрана
-  <kbd>?</kbd>: Открыть меню
-  <kbd>&lt;c-s&gt;</kbd>: Просмотреть параметры фильтрации по пути
-  <kbd>W</kbd>: Открыть меню сравнении
-  <kbd>&lt;c-e&gt;</kbd>: Открыть меню сравнении
-  <kbd>&lt;c-w&gt;</kbd>: Переключить отображение изменении пробелов в просмотрщике сравнении
-  <kbd>z</kbd>: Отменить (через reflog) (экспериментальный)
-  <kbd>&lt;c-z&gt;</kbd>: Повторить (через reflog) (экспериментальный)
-  <kbd>P</kbd>: Отправить изменения
-  <kbd>p</kbd>: Получить и слить изменения
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | Переключиться на последний репозиторий |  |
+| `` <pgup> (fn+up/shift+k) `` | Прокрутить вверх главную панель |  |
+| `` <pgdown> (fn+down/shift+j) `` | Прокрутить вниз главную панель |  |
+| `` @ `` | Открыть меню журнала команд | View options for the command log e.g. show/hide the command log and focus the command log. |
+| `` P `` | Отправить изменения | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` p `` | Получить и слить изменения | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` } `` | Увеличить размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Increase the amount of the context shown around changes in the diff view. |
+| `` { `` | Уменьшите размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Decrease the amount of the context shown around changes in the diff view. |
+| `` : `` | Выполнить пользовательскую команду | Bring up a prompt where you can enter a shell command to execute. Not to be confused with pre-configured custom commands. |
+| `` <c-p> `` | Просмотреть пользовательские параметры патча |  |
+| `` m `` | Просмотреть параметры слияния/перебазирования | View options to abort/continue/skip the current merge/rebase. |
+| `` R `` | Обновить | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
+| `` + `` | Следующий режим экрана (нормальный/полуэкранный/полноэкранный) |  |
+| `` _ `` | Предыдущий режим экрана |  |
+| `` ? `` | Открыть меню |  |
+| `` <c-s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
+| `` W `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` <c-e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` q `` | Выйти |  |
+| `` <esc> `` | Отменить |  |
+| `` <c-w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view. |
+| `` z `` | Отменить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git запустить, чтобы отменить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
+| `` <c-z> `` | Повторить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git нужно запустить, чтобы повторить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
 
 ## Навигация по панели списка
 
-<pre>
-  <kbd>,</kbd>: Предыдущая страница
-  <kbd>.</kbd>: Следующая страница
-  <kbd>&lt;</kbd>: Пролистать наверх
-  <kbd>&gt;</kbd>: Прокрутить вниз
-  <kbd>/</kbd>: Найти
-  <kbd>H</kbd>: Прокрутить влево
-  <kbd>L</kbd>: Прокрутить вправо
-  <kbd>]</kbd>: Следующая вкладка
-  <kbd>[</kbd>: Предыдущая вкладка
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | Предыдущая страница |  |
+| `` . `` | Следующая страница |  |
+| `` < `` | Пролистать наверх |  |
+| `` > `` | Прокрутить вниз |  |
+| `` v `` | Переключить выборку перетаскивания |  |
+| `` <s-down> `` | Range select down |  |
+| `` <s-up> `` | Range select up |  |
+| `` / `` | Найти |  |
+| `` H `` | Прокрутить влево |  |
+| `` L `` | Прокрутить вправо |  |
+| `` ] `` | Следующая вкладка |  |
+| `` [ `` | Предыдущая вкладка |  |
 
 ## Worktrees
 
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | New worktree |  |
+| `` <space> `` | Switch | Switch to the selected worktree. |
+| `` o `` | Open in editor |  |
+| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
+| `` / `` | Filter the current view by text |  |
 
 ## Главная панель (Индексирование)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Выбрать предыдущую часть
-  <kbd>&lt;right&gt;</kbd>: Выбрать следующую часть
-  <kbd>v</kbd>: Переключить выборку перетаскивания
-  <kbd>V</kbd>: Переключить выборку перетаскивания
-  <kbd>a</kbd>: Переключить выборку частей
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать выделенный текст в буфер обмена
-  <kbd>o</kbd>: Открыть файл
-  <kbd>e</kbd>: Редактировать файл
-  <kbd>&lt;esc&gt;</kbd>: Вернуться к панели файлов
-  <kbd>&lt;tab&gt;</kbd>: Переключиться на другую панель (проиндексированные/непроиндексированные изменения)
-  <kbd>&lt;space&gt;</kbd>: Переключить строку в проиндексированные / непроиндексированные
-  <kbd>d</kbd>: Отменить изменение (git reset)
-  <kbd>E</kbd>: Изменить эту часть
-  <kbd>c</kbd>: Сохранить изменения
-  <kbd>w</kbd>: Закоммитить изменения без предварительного хука коммита
-  <kbd>C</kbd>: Сохранить изменения с помощью редактора git
-  <kbd>/</kbd>: Найти
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Выбрать предыдущую часть |  |
+| `` <right> `` | Выбрать следующую часть |  |
+| `` v `` | Переключить выборку перетаскивания |  |
+| `` a `` | Переключить выборку частей | Toggle hunk selection mode. |
+| `` <c-o> `` | Скопировать выделенный текст в буфер обмена |  |
+| `` <space> `` | Переключить индекс | Переключить строку в проиндексированные / непроиндексированные |
+| `` d `` | Отменить изменение (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
+| `` o `` | Открыть файл | Open file in default application. |
+| `` e `` | Редактировать файл | Open file in external editor. |
+| `` <esc> `` | Вернуться к панели файлов |  |
+| `` <tab> `` | Переключиться на другую панель (проиндексированные/непроиндексированные изменения) | Switch to other view (staged/unstaged changes). |
+| `` E `` | Изменить эту часть | Edit selected hunk in external editor. |
+| `` c `` | Сохранить изменения | Commit staged changes. |
+| `` w `` | Закоммитить изменения без предварительного хука коммита |  |
+| `` C `` | Сохранить изменения с помощью редактора git |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | Найти |  |
 
 ## Главная панель (Обычный)
 
-<pre>
-  <kbd>mouse wheel down</kbd>: Прокрутить вниз (fn+up)
-  <kbd>mouse wheel up</kbd>: Прокрутить вверх (fn+down)
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | Прокрутить вниз |  |
+| `` mouse wheel up (fn+down) `` | Прокрутить вверх |  |
 
 ## Главная панель (Слияние)
 
-<pre>
-  <kbd>e</kbd>: Редактировать файл
-  <kbd>o</kbd>: Открыть файл
-  <kbd>&lt;left&gt;</kbd>: Выбрать предыдущий конфликт
-  <kbd>&lt;right&gt;</kbd>: Выбрать следующий конфликт
-  <kbd>&lt;up&gt;</kbd>: Выбрать предыдущую часть
-  <kbd>&lt;down&gt;</kbd>: Выбрать следующую часть
-  <kbd>z</kbd>: Отменить
-  <kbd>M</kbd>: Открыть внешний инструмент слияния (git mergetool)
-  <kbd>&lt;space&gt;</kbd>: Выбрать эту часть
-  <kbd>b</kbd>: Выбрать все части
-  <kbd>&lt;esc&gt;</kbd>: Вернуться к панели файлов
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Выбрать эту часть |  |
+| `` b `` | Выбрать все части |  |
+| `` <up> `` | Выбрать предыдущую часть |  |
+| `` <down> `` | Выбрать следующую часть |  |
+| `` <left> `` | Выбрать предыдущий конфликт |  |
+| `` <right> `` | Выбрать следующий конфликт |  |
+| `` z `` | Отменить | Undo last merge conflict resolution. |
+| `` e `` | Редактировать файл | Open file in external editor. |
+| `` o `` | Открыть файл | Open file in default application. |
+| `` M `` | Открыть внешний инструмент слияния (git mergetool) | Run `git mergetool`. |
+| `` <esc> `` | Вернуться к панели файлов |  |
 
 ## Главная панель (сборка патчей)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: Выбрать предыдущую часть
-  <kbd>&lt;right&gt;</kbd>: Выбрать следующую часть
-  <kbd>v</kbd>: Переключить выборку перетаскивания
-  <kbd>V</kbd>: Переключить выборку перетаскивания
-  <kbd>a</kbd>: Переключить выборку частей
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать выделенный текст в буфер обмена
-  <kbd>o</kbd>: Открыть файл
-  <kbd>e</kbd>: Редактировать файл
-  <kbd>&lt;space&gt;</kbd>: Добавить/удалить строку(и) для патча
-  <kbd>&lt;esc&gt;</kbd>: Выйти из сборщика пользовательских патчей
-  <kbd>/</kbd>: Найти
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | Выбрать предыдущую часть |  |
+| `` <right> `` | Выбрать следующую часть |  |
+| `` v `` | Переключить выборку перетаскивания |  |
+| `` a `` | Переключить выборку частей | Toggle hunk selection mode. |
+| `` <c-o> `` | Скопировать выделенный текст в буфер обмена |  |
+| `` o `` | Открыть файл | Open file in default application. |
+| `` e `` | Редактировать файл | Open file in external editor. |
+| `` <space> `` | Добавить/удалить строку(и) для патча |  |
+| `` <esc> `` | Выйти из сборщика пользовательских патчей |  |
+| `` / `` | Найти |  |
 
 ## Журнал ссылок (Reflog)
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать SHA коммита в буфер обмена
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Переключить коммит
-  <kbd>y</kbd>: Скопировать атрибут коммита
-  <kbd>o</kbd>: Открыть коммит в браузере
-  <kbd>n</kbd>: Создать новую ветку с этого коммита
-  <kbd>g</kbd>: Просмотреть параметры сброса
-  <kbd>c</kbd>: Скопировать отобранные коммит (cherry-pick)
-  <kbd>C</kbd>: Скопировать несколько отобранных коммитов (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Сбросить отобранную (скопированную | cherry-picked) выборку коммитов
-  <kbd>&lt;enter&gt;</kbd>: Просмотреть коммиты
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать hash коммита в буфер обмена |  |
+| `` <space> `` | Переключить | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Скопировать атрибут коммита | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Открыть коммит в браузере |  |
+| `` n `` | Создать новую ветку с этого коммита |  |
+| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Сбросить отобранную (скопированную | cherry-picked) выборку коммитов |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | Просмотреть коммиты |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Коммиты
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать SHA коммита в буфер обмена
-  <kbd>&lt;c-r&gt;</kbd>: Сбросить отобранную (скопированную | cherry-picked) выборку коммитов
-  <kbd>b</kbd>: Просмотреть параметры бинарного поиска
-  <kbd>s</kbd>: Объединить несколько коммитов в один нижний
-  <kbd>f</kbd>: Объединить несколько коммитов в один отбросив сообщение коммита
-  <kbd>r</kbd>: Перефразировать коммит
-  <kbd>R</kbd>: Переписать коммит с помощью редактора
-  <kbd>d</kbd>: Удалить коммит
-  <kbd>e</kbd>: Изменить коммит
-  <kbd>p</kbd>: Выбрать коммит (в середине перебазирования)
-  <kbd>F</kbd>: Создать fixup коммит для этого коммита
-  <kbd>S</kbd>: Объединить все 'fixup!' коммиты выше в выбранный коммит (автосохранение)
-  <kbd>&lt;c-j&gt;</kbd>: Переместить коммит вниз на один
-  <kbd>&lt;c-k&gt;</kbd>: Переместить коммит вверх на один
-  <kbd>v</kbd>: Вставить отобранные коммиты (cherry-pick)
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: Править последний коммит с проиндексированными изменениями
-  <kbd>a</kbd>: Установить/убрать автора коммита
-  <kbd>t</kbd>: Отменить коммит
-  <kbd>T</kbd>: Пометить коммит тегом
-  <kbd>&lt;c-l&gt;</kbd>: Открыть меню журнала
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Переключить коммит
-  <kbd>y</kbd>: Скопировать атрибут коммита
-  <kbd>o</kbd>: Открыть коммит в браузере
-  <kbd>n</kbd>: Создать новую ветку с этого коммита
-  <kbd>g</kbd>: Просмотреть параметры сброса
-  <kbd>c</kbd>: Скопировать отобранные коммит (cherry-pick)
-  <kbd>C</kbd>: Скопировать несколько отобранных коммитов (cherry-pick)
-  <kbd>&lt;enter&gt;</kbd>: Просмотреть файлы выбранного элемента
-  <kbd>/</kbd>: Найти
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать hash коммита в буфер обмена |  |
+| `` <c-r> `` | Сбросить отобранную (скопированную | cherry-picked) выборку коммитов |  |
+| `` b `` | Просмотреть параметры бинарного поиска |  |
+| `` s `` | Объединить коммиты (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
+| `` f `` | Объединить несколько коммитов в один отбросив сообщение коммита (Fixup)  | Meld the selected commit into the commit below it. Similar to fixup, but the selected commit's message will be discarded. |
+| `` r `` | Перефразировать коммит | Reword the selected commit's message. |
+| `` R `` | Переписать коммит с помощью редактора |  |
+| `` d `` | Удалить коммит | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
+| `` e `` | Edit (start interactive rebase) | Изменить коммит |
+| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.
+If you would instead like to start an interactive rebase from the selected commit, press `e`. |
+| `` p `` | Pick | Выбрать коммит (в середине перебазирования) |
+| `` F `` | Создать fixup коммит | Создать fixup коммит для этого коммита |
+| `` S `` | Apply fixup commits | Объединить все 'fixup!' коммиты выше в выбранный коммит (автосохранение) |
+| `` <c-j> `` | Переместить коммит вниз на один |  |
+| `` <c-k> `` | Переместить коммит вверх на один |  |
+| `` V `` | Вставить отобранные коммиты (cherry-pick) |  |
+| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
+| `` A `` | Amend | Править последний коммит с проиндексированными изменениями |
+| `` a `` | Установить/убрать автора коммита | Set/Reset commit author or set co-author. |
+| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
+| `` T `` | Пометить коммит тегом | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
+| `` <c-l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
+| `` <space> `` | Переключить | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Скопировать атрибут коммита | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Открыть коммит в браузере |  |
+| `` n `` | Создать новую ветку с этого коммита |  |
+| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | Просмотреть файлы выбранного элемента |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Найти |  |
 
 ## Локальные Ветки
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать название ветки в буфер обмена
-  <kbd>i</kbd>: Показать параметры git-flow
-  <kbd>&lt;space&gt;</kbd>: Переключить
-  <kbd>n</kbd>: Новая ветка
-  <kbd>o</kbd>: Создать запрос на принятие изменений
-  <kbd>O</kbd>: Создать параметры запроса принятие изменений
-  <kbd>&lt;c-y&gt;</kbd>: Скопировать URL запроса на принятие изменений в буфер обмена
-  <kbd>c</kbd>: Переключить по названию
-  <kbd>F</kbd>: Принудительное переключение
-  <kbd>d</kbd>: Удалить ветку
-  <kbd>r</kbd>: Перебазировать переключённую ветку на эту ветку
-  <kbd>M</kbd>: Слияние с текущей переключённой веткой
-  <kbd>f</kbd>: Перемотать эту ветку вперёд из её upstream-ветки
-  <kbd>T</kbd>: Создать тег
-  <kbd>g</kbd>: Просмотреть параметры сброса
-  <kbd>R</kbd>: Переименовать ветку
-  <kbd>u</kbd>: Установить/убрать upstream-ветку
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Просмотреть коммиты
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать название ветки в буфер обмена |  |
+| `` i `` | Показать параметры git-flow |  |
+| `` <space> `` | Переключить | Checkout selected item. |
+| `` n `` | Новая ветка |  |
+| `` o `` | Создать запрос на принятие изменений |  |
+| `` O `` | Создать параметры запроса принятие изменений |  |
+| `` <c-y> `` | Скопировать URL запроса на принятие изменений в буфер обмена |  |
+| `` c `` | Переключить по названию | Checkout by name. In the input box you can enter '-' to switch to the last branch. |
+| `` F `` | Принудительное переключение | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
+| `` d `` | Delete | View delete options for local/remote branch. |
+| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
+| `` M `` | Слияние с текущей переключённой веткой | Merge selected branch into currently checked out branch. |
+| `` f `` | Перемотать эту ветку вперёд из её upstream-ветки | Fast-forward selected branch from its upstream. |
+| `` T `` | Создать тег |  |
+| `` s `` | Порядок сортировки |  |
+| `` g `` | Просмотреть параметры сброса |  |
+| `` R `` | Переименовать ветку |  |
+| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
+| `` <enter> `` | Просмотреть коммиты |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Меню
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Выполнить
-  <kbd>&lt;esc&gt;</kbd>: Закрыть
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Выполнить |  |
+| `` <esc> `` | Закрыть |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Панель Подтверждения
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Подтвердить
-  <kbd>&lt;esc&gt;</kbd>: Закрыть/отменить
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Подтвердить |  |
+| `` <esc> `` | Закрыть/отменить |  |
 
 ## Подкоммиты
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать SHA коммита в буфер обмена
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: Переключить коммит
-  <kbd>y</kbd>: Скопировать атрибут коммита
-  <kbd>o</kbd>: Открыть коммит в браузере
-  <kbd>n</kbd>: Создать новую ветку с этого коммита
-  <kbd>g</kbd>: Просмотреть параметры сброса
-  <kbd>c</kbd>: Скопировать отобранные коммит (cherry-pick)
-  <kbd>C</kbd>: Скопировать несколько отобранных коммитов (cherry-pick)
-  <kbd>&lt;c-r&gt;</kbd>: Сбросить отобранную (скопированную | cherry-picked) выборку коммитов
-  <kbd>&lt;enter&gt;</kbd>: Просмотреть файлы выбранного элемента
-  <kbd>/</kbd>: Найти
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать hash коммита в буфер обмена |  |
+| `` <space> `` | Переключить | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Скопировать атрибут коммита | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | Открыть коммит в браузере |  |
+| `` n `` | Создать новую ветку с этого коммита |  |
+| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | Сбросить отобранную (скопированную | cherry-picked) выборку коммитов |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | Просмотреть файлы выбранного элемента |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Найти |  |
 
 ## Подмодули
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать название подмодуля в буфер обмена
-  <kbd>&lt;enter&gt;</kbd>: Ввести подмодуль
-  <kbd>&lt;space&gt;</kbd>: Ввести подмодуль
-  <kbd>d</kbd>: Удалить подмодуль
-  <kbd>u</kbd>: Обновить подмодуль
-  <kbd>n</kbd>: Добавить новый подмодуль
-  <kbd>e</kbd>: Обновить URL подмодуля
-  <kbd>i</kbd>: Инициализировать подмодуль
-  <kbd>b</kbd>: Просмотреть параметры массового подмодуля
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать название подмодуля в буфер обмена |  |
+| `` <enter> `` | Enter | Ввести подмодуль |
+| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
+| `` u `` | Update | Обновить подмодуль |
+| `` n `` | Добавить новый подмодуль |  |
+| `` e `` | Обновить URL подмодуля |  |
+| `` i `` | Initialize | Инициализировать подмодуль |
+| `` b `` | Просмотреть параметры массового подмодуля |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Сводка коммита
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: Подтвердить
-  <kbd>&lt;esc&gt;</kbd>: Закрыть
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | Подтвердить |  |
+| `` <esc> `` | Закрыть |  |
 
 ## Сохранить Изменения Файлов
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать закомиченное имя файла в буфер обмена
-  <kbd>c</kbd>: Переключить файл
-  <kbd>d</kbd>: Отменить изменения коммита в этом файле
-  <kbd>o</kbd>: Открыть файл
-  <kbd>e</kbd>: Редактировать файл
-  <kbd>&lt;space&gt;</kbd>: Переключить файлы включённые в патч
-  <kbd>a</kbd>: Переключить все файлы, включённые в патч
-  <kbd>&lt;enter&gt;</kbd>: Введите файл, чтобы добавить выбранные строки в патч (или свернуть каталог переключения)
-  <kbd>`</kbd>: Переключить вид дерева файлов
-  <kbd>/</kbd>: Найти
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать название файла в буфер обмена |  |
+| `` c `` | Переключить | Переключить файл |
+| `` d `` | Remove | Отменить изменения коммита в этом файле |
+| `` o `` | Открыть файл | Open file in default application. |
+| `` e `` | Edit | Open file in external editor. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <space> `` | Переключить файлы включённые в патч | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | Переключить все файлы, включённые в патч | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | Введите файл, чтобы добавить выбранные строки в патч (или свернуть каталог переключения) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
+| `` ` `` | Переключить вид дерева файлов | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` / `` | Найти |  |
 
 ## Статус
 
-<pre>
-  <kbd>o</kbd>: Открыть файл конфигурации
-  <kbd>e</kbd>: Редактировать файл конфигурации
-  <kbd>u</kbd>: Проверить обновления
-  <kbd>&lt;enter&gt;</kbd>: Переключиться на последний репозиторий
-  <kbd>a</kbd>: Показать все логи ветки
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | Открыть файл конфигурации | Open file in default application. |
+| `` e `` | Редактировать файл конфигурации | Open file in external editor. |
+| `` u `` | Проверить обновления |  |
+| `` <enter> `` | Переключиться на последний репозиторий |  |
+| `` a `` | Показать все логи ветки |  |
 
 ## Теги
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Переключить
-  <kbd>d</kbd>: Удалить тег
-  <kbd>P</kbd>: Отправить тег
-  <kbd>n</kbd>: Создать тег
-  <kbd>g</kbd>: Просмотреть параметры сброса
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Просмотреть коммиты
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Переключить | Checkout the selected tag tag as a detached HEAD. |
+| `` n `` | Создать тег | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
+| `` d `` | Delete | View delete options for local/remote tag. |
+| `` P `` | Отправить тег | Push the selected tag to a remote. You'll be prompted to select a remote. |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | Просмотреть коммиты |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Удалённые ветки
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать название ветки в буфер обмена
-  <kbd>&lt;space&gt;</kbd>: Переключить
-  <kbd>n</kbd>: Новая ветка
-  <kbd>M</kbd>: Слияние с текущей переключённой веткой
-  <kbd>r</kbd>: Перебазировать переключённую ветку на эту ветку
-  <kbd>d</kbd>: Удалить ветку
-  <kbd>u</kbd>: Установить как upstream-ветку переключённую ветку
-  <kbd>g</kbd>: Просмотреть параметры сброса
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Просмотреть коммиты
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать название ветки в буфер обмена |  |
+| `` <space> `` | Переключить | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
+| `` n `` | Новая ветка |  |
+| `` M `` | Слияние с текущей переключённой веткой | Merge selected branch into currently checked out branch. |
+| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
+| `` d `` | Delete | Delete the remote branch from the remote. |
+| `` u `` | Set as upstream | Установить как upstream-ветку переключённую ветку |
+| `` s `` | Порядок сортировки |  |
+| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | Просмотреть коммиты |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Удалённые репозитории
 
-<pre>
-  <kbd>f</kbd>: Получение изменения из удалённого репозитория
-  <kbd>n</kbd>: Добавить новую удалённую ветку
-  <kbd>d</kbd>: Удалить удалённую ветку
-  <kbd>e</kbd>: Редактировать удалённый репозитории
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | View branches |  |
+| `` n `` | Добавить новую удалённую ветку |  |
+| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
+| `` e `` | Edit | Редактировать удалённый репозитории |
+| `` f `` | Получить изменения | Получение изменения из удалённого репозитория |
+| `` / `` | Filter the current view by text |  |
 
 ## Файлы
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: Скопировать название файла в буфер обмена
-  <kbd>d</kbd>: Просмотреть параметры «отмены изменении»
-  <kbd>&lt;space&gt;</kbd>: Переключить индекс
-  <kbd>&lt;c-b&gt;</kbd>: Фильтровать файлы (проиндексированные/непроиндексированные)
-  <kbd>c</kbd>: Сохранить изменения
-  <kbd>w</kbd>: Закоммитить изменения без предварительного хука коммита
-  <kbd>A</kbd>: Правка последнего коммита
-  <kbd>C</kbd>: Сохранить изменения с помощью редактора git
-  <kbd>e</kbd>: Редактировать файл
-  <kbd>o</kbd>: Открыть файл
-  <kbd>i</kbd>: Игнорировать или исключить файл
-  <kbd>r</kbd>: Обновить файлы
-  <kbd>s</kbd>: Припрятать все изменения
-  <kbd>S</kbd>: Просмотреть параметры хранилища
-  <kbd>a</kbd>: Все проиндексированные/непроиндексированные
-  <kbd>&lt;enter&gt;</kbd>: Проиндексировать отдельные части/строки для файла или свернуть/развернуть для каталога
-  <kbd>g</kbd>: Просмотреть параметры сброса upstream-ветки
-  <kbd>D</kbd>: Просмотреть параметры сброса
-  <kbd>`</kbd>: Переключить вид дерева файлов
-  <kbd>M</kbd>: Открыть внешний инструмент слияния (git mergetool)
-  <kbd>f</kbd>: Получить изменения
-  <kbd>/</kbd>: Найти
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | Скопировать название файла в буфер обмена |  |
+| `` <space> `` | Переключить индекс | Toggle staged for selected file. |
+| `` <c-b> `` | Фильтровать файлы (проиндексированные/непроиндексированные) |  |
+| `` y `` | Copy to clipboard |  |
+| `` c `` | Сохранить изменения | Commit staged changes. |
+| `` w `` | Закоммитить изменения без предварительного хука коммита |  |
+| `` A `` | Правка последнего коммита |  |
+| `` C `` | Сохранить изменения с помощью редактора git |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edit | Open file in external editor. |
+| `` o `` | Открыть файл | Open file in default application. |
+| `` i `` | Игнорировать или исключить файл |  |
+| `` r `` | Обновить файлы |  |
+| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
+| `` S `` | Просмотреть параметры хранилища | View stash options (e.g. stash all, stash staged, stash unstaged). |
+| `` a `` | Все проиндексированные/непроиндексированные | Toggle staged/unstaged for all files in working tree. |
+| `` <enter> `` | Проиндексировать отдельные части/строки для файла или свернуть/развернуть для каталога | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
+| `` d `` | Просмотреть параметры «отмены изменении» | View options for discarding changes to the selected file. |
+| `` g `` | Просмотреть параметры сброса upstream-ветки |  |
+| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
+| `` ` `` | Переключить вид дерева файлов | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` M `` | Открыть внешний инструмент слияния (git mergetool) | Run `git mergetool`. |
+| `` f `` | Получить изменения | Fetch changes from remote. |
+| `` / `` | Найти |  |
 
 ## Хранилище
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: Применить припрятанные изменения
-  <kbd>g</kbd>: Применить припрятанные изменения и тут же удалить их из хранилища
-  <kbd>d</kbd>: Удалить припрятанные изменения из хранилища
-  <kbd>n</kbd>: Новая ветка
-  <kbd>r</kbd>: Переименовать хранилище
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: Просмотреть файлы выбранного элемента
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | Применить припрятанные изменения | Apply the stash entry to your working directory. |
+| `` g `` | Применить припрятанные изменения и тут же удалить их из хранилища | Apply the stash entry to your working directory and remove the stash entry. |
+| `` d `` | Удалить припрятанные изменения из хранилища | Remove the stash entry from the stash list. |
+| `` n `` | Новая ветка | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
+| `` r `` | Переименовать хранилище |  |
+| `` <enter> `` | Просмотреть файлы выбранного элемента |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |

docs/keybindings/Keybindings_zh-CN.md

@@ -1,4 +1,4 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
 # Lazygit 按键绑定
 
@@ -6,348 +6,359 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
 
 ## 全局键绑定
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: 切换到最近的仓库
-  <kbd>&lt;pgup&gt;</kbd>: 向上滚动主面板 (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: 向下滚动主面板 (fn+down/shift+j)
-  <kbd>@</kbd>: 打开命令日志菜单
-  <kbd>}</kbd>: 扩大差异视图中显示的上下文范围
-  <kbd>{</kbd>: 缩小差异视图中显示的上下文范围
-  <kbd>:</kbd>: 执行自定义命令
-  <kbd>&lt;c-p&gt;</kbd>: 查看自定义补丁选项
-  <kbd>m</kbd>: 查看 合并/变基 选项
-  <kbd>R</kbd>: 刷新
-  <kbd>+</kbd>: 下一屏模式（正常/半屏/全屏）
-  <kbd>_</kbd>: 上一屏模式
-  <kbd>?</kbd>: 打开菜单
-  <kbd>&lt;c-s&gt;</kbd>: 查看按路径过滤选项
-  <kbd>W</kbd>: 打开 diff 菜单
-  <kbd>&lt;c-e&gt;</kbd>: 打开 diff 菜单
-  <kbd>&lt;c-w&gt;</kbd>: 切换是否在差异视图中显示空白字符差异
-  <kbd>z</kbd>: （通过 reflog）撤销「实验功能」
-  <kbd>&lt;c-z&gt;</kbd>: （通过 reflog）重做「实验功能」
-  <kbd>P</kbd>: 推送
-  <kbd>p</kbd>: 拉取
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | 切换到最近的仓库 |  |
+| `` <pgup> (fn+up/shift+k) `` | 向上滚动主面板 |  |
+| `` <pgdown> (fn+down/shift+j) `` | 向下滚动主面板 |  |
+| `` @ `` | 打开命令日志菜单 | View options for the command log e.g. show/hide the command log and focus the command log. |
+| `` P `` | 推送 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` p `` | 拉取 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` } `` | 扩大差异视图中显示的上下文范围 | Increase the amount of the context shown around changes in the diff view. |
+| `` { `` | 缩小差异视图中显示的上下文范围 | Decrease the amount of the context shown around changes in the diff view. |
+| `` : `` | 执行自定义命令 | Bring up a prompt where you can enter a shell command to execute. Not to be confused with pre-configured custom commands. |
+| `` <c-p> `` | 查看自定义补丁选项 |  |
+| `` m `` | 查看 合并/变基 选项 | View options to abort/continue/skip the current merge/rebase. |
+| `` R `` | 刷新 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
+| `` + `` | 下一屏模式（正常/半屏/全屏） |  |
+| `` _ `` | 上一屏模式 |  |
+| `` ? `` | 打开菜单 |  |
+| `` <c-s> `` | 查看按路径过滤选项 | View options for filtering the commit log, so that only commits matching the filter are shown. |
+| `` W `` | 打开 diff 菜单 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` <c-e> `` | 打开 diff 菜单 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` q `` | 退出 |  |
+| `` <esc> `` | 取消 |  |
+| `` <c-w> `` | 切换是否在差异视图中显示空白字符差异 | Toggle whether or not whitespace changes are shown in the diff view. |
+| `` z `` | （通过 reflog）撤销「实验功能」 | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
+| `` <c-z> `` | （通过 reflog）重做「实验功能」 | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
 
 ## 列表面板导航
 
-<pre>
-  <kbd>,</kbd>: 上一页
-  <kbd>.</kbd>: 下一页
-  <kbd>&lt;</kbd>: 滚动到顶部
-  <kbd>&gt;</kbd>: 滚动到底部
-  <kbd>/</kbd>: 开始搜索
-  <kbd>H</kbd>: 向左滚动
-  <kbd>L</kbd>: 向右滚动
-  <kbd>]</kbd>: 下一个标签
-  <kbd>[</kbd>: 上一个标签
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | 上一页 |  |
+| `` . `` | 下一页 |  |
+| `` < `` | 滚动到顶部 |  |
+| `` > `` | 滚动到底部 |  |
+| `` v `` | 切换拖动选择 |  |
+| `` <s-down> `` | Range select down |  |
+| `` <s-up> `` | Range select up |  |
+| `` / `` | 开始搜索 |  |
+| `` H `` | 向左滚动 |  |
+| `` L `` | 向右滚动 |  |
+| `` ] `` | 下一个标签 |  |
+| `` [ `` | 上一个标签 |  |
 
 ## Reflog 页面
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将提交的 SHA 复制到剪贴板
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 检出提交
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: 在浏览器中打开提交
-  <kbd>n</kbd>: 从提交创建新分支
-  <kbd>g</kbd>: 查看重置选项
-  <kbd>c</kbd>: 复制提交（拣选）
-  <kbd>C</kbd>: 复制提交范围（拣选）
-  <kbd>&lt;c-r&gt;</kbd>: 重置已拣选（复制）的提交
-  <kbd>&lt;enter&gt;</kbd>: 查看提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将提交的 hash 复制到剪贴板 |  |
+| `` <space> `` | 检出 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 在浏览器中打开提交 |  |
+| `` n `` | 从提交创建新分支 |  |
+| `` g `` | 查看重置选项 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 复制提交（拣选） | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | 重置已拣选（复制）的提交 |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | 查看提交 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## Worktrees
 
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | New worktree |  |
+| `` <space> `` | Switch | Switch to the selected worktree. |
+| `` o `` | Open in editor |  |
+| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
+| `` / `` | Filter the current view by text |  |
 
 ## 分支页面
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将分支名称复制到剪贴板
-  <kbd>i</kbd>: 显示 git-flow 选项
-  <kbd>&lt;space&gt;</kbd>: 检出
-  <kbd>n</kbd>: 新分支
-  <kbd>o</kbd>: 创建抓取请求
-  <kbd>O</kbd>: 创建抓取请求选项
-  <kbd>&lt;c-y&gt;</kbd>: 将抓取请求 URL 复制到剪贴板
-  <kbd>c</kbd>: 按名称检出
-  <kbd>F</kbd>: 强制检出
-  <kbd>d</kbd>: 删除分支
-  <kbd>r</kbd>: 将已检出的分支变基到该分支
-  <kbd>M</kbd>: 合并到当前检出的分支
-  <kbd>f</kbd>: 从上游快进此分支
-  <kbd>T</kbd>: 创建标签
-  <kbd>g</kbd>: 查看重置选项
-  <kbd>R</kbd>: 重命名分支
-  <kbd>u</kbd>: Set/Unset upstream
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 查看提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将分支名称复制到剪贴板 |  |
+| `` i `` | 显示 git-flow 选项 |  |
+| `` <space> `` | 检出 | Checkout selected item. |
+| `` n `` | 新分支 |  |
+| `` o `` | 创建抓取请求 |  |
+| `` O `` | 创建抓取请求选项 |  |
+| `` <c-y> `` | 将抓取请求 URL 复制到剪贴板 |  |
+| `` c `` | 按名称检出 | Checkout by name. In the input box you can enter '-' to switch to the last branch. |
+| `` F `` | 强制检出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
+| `` d `` | Delete | View delete options for local/remote branch. |
+| `` r `` | 将已检出的分支变基到该分支 | Rebase the checked-out branch onto the selected branch. |
+| `` M `` | 合并到当前检出的分支 | Merge selected branch into currently checked out branch. |
+| `` f `` | 从上游快进此分支 | Fast-forward selected branch from its upstream. |
+| `` T `` | 创建标签 |  |
+| `` s `` | Sort order |  |
+| `` g `` | 查看重置选项 |  |
+| `` R `` | 重命名分支 |  |
+| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
+| `` <enter> `` | 查看提交 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 子提交
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将提交的 SHA 复制到剪贴板
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 检出提交
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: 在浏览器中打开提交
-  <kbd>n</kbd>: 从提交创建新分支
-  <kbd>g</kbd>: 查看重置选项
-  <kbd>c</kbd>: 复制提交（拣选）
-  <kbd>C</kbd>: 复制提交范围（拣选）
-  <kbd>&lt;c-r&gt;</kbd>: 重置已拣选（复制）的提交
-  <kbd>&lt;enter&gt;</kbd>: 查看提交的文件
-  <kbd>/</kbd>: 开始搜索
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将提交的 hash 复制到剪贴板 |  |
+| `` <space> `` | 检出 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 在浏览器中打开提交 |  |
+| `` n `` | 从提交创建新分支 |  |
+| `` g `` | 查看重置选项 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 复制提交（拣选） | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | 重置已拣选（复制）的提交 |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | 查看提交的文件 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | 开始搜索 |  |
 
 ## 子模块
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将子模块名称复制到剪贴板
-  <kbd>&lt;enter&gt;</kbd>: 输入子模块
-  <kbd>&lt;space&gt;</kbd>: 输入子模块
-  <kbd>d</kbd>: 删除子模块
-  <kbd>u</kbd>: 更新子模块
-  <kbd>n</kbd>: 添加新的子模块
-  <kbd>e</kbd>: 更新子模块 URL
-  <kbd>i</kbd>: 初始化子模块
-  <kbd>b</kbd>: 查看批量子模块选项
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将子模块名称复制到剪贴板 |  |
+| `` <enter> `` | Enter | 输入子模块 |
+| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
+| `` u `` | Update | 更新子模块 |
+| `` n `` | 添加新的子模块 |  |
+| `` e `` | 更新子模块 URL |  |
+| `` i `` | Initialize | 初始化子模块 |
+| `` b `` | 查看批量子模块选项 |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 提交
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将提交的 SHA 复制到剪贴板
-  <kbd>&lt;c-r&gt;</kbd>: 重置已拣选（复制）的提交
-  <kbd>b</kbd>: 查看二分查找选项
-  <kbd>s</kbd>: 向下压缩
-  <kbd>f</kbd>: 修正提交（fixup）
-  <kbd>r</kbd>: 改写提交
-  <kbd>R</kbd>: 使用编辑器重命名提交
-  <kbd>d</kbd>: 删除提交
-  <kbd>e</kbd>: 编辑提交
-  <kbd>p</kbd>: 选择提交（变基过程中）
-  <kbd>F</kbd>: 创建修正提交
-  <kbd>S</kbd>: 压缩在所选提交之上的所有“fixup!”提交（自动压缩）
-  <kbd>&lt;c-j&gt;</kbd>: 下移提交
-  <kbd>&lt;c-k&gt;</kbd>: 上移提交
-  <kbd>v</kbd>: 粘贴提交（拣选）
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: 用已暂存的更改来修补提交
-  <kbd>a</kbd>: Set/Reset commit author
-  <kbd>t</kbd>: 还原提交
-  <kbd>T</kbd>: 标签提交
-  <kbd>&lt;c-l&gt;</kbd>: 打开日志菜单
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 检出提交
-  <kbd>y</kbd>: Copy commit attribute
-  <kbd>o</kbd>: 在浏览器中打开提交
-  <kbd>n</kbd>: 从提交创建新分支
-  <kbd>g</kbd>: 查看重置选项
-  <kbd>c</kbd>: 复制提交（拣选）
-  <kbd>C</kbd>: 复制提交范围（拣选）
-  <kbd>&lt;enter&gt;</kbd>: 查看提交的文件
-  <kbd>/</kbd>: 开始搜索
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将提交的 hash 复制到剪贴板 |  |
+| `` <c-r> `` | 重置已拣选（复制）的提交 |  |
+| `` b `` | 查看二分查找选项 |  |
+| `` s `` | 压缩 | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
+| `` f `` | 修正（fixup） | Meld the selected commit into the commit below it. Similar to fixup, but the selected commit's message will be discarded. |
+| `` r `` | 改写提交 | Reword the selected commit's message. |
+| `` R `` | 使用编辑器重命名提交 |  |
+| `` d `` | 删除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
+| `` e `` | Edit (start interactive rebase) | 编辑提交 |
+| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.
+If you would instead like to start an interactive rebase from the selected commit, press `e`. |
+| `` p `` | Pick | 选择提交（变基过程中） |
+| `` F `` | 为此提交创建修正 | 创建修正提交 |
+| `` S `` | Apply fixup commits | 压缩在所选提交之上的所有“fixup!”提交（自动压缩） |
+| `` <c-j> `` | 下移提交 |  |
+| `` <c-k> `` | 上移提交 |  |
+| `` V `` | 粘贴提交（拣选） |  |
+| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
+| `` A `` | Amend | 用已暂存的更改来修补提交 |
+| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
+| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
+| `` T `` | 标签提交 | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
+| `` <c-l> `` | 打开日志菜单 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
+| `` <space> `` | 检出 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 在浏览器中打开提交 |  |
+| `` n `` | 从提交创建新分支 |  |
+| `` g `` | 查看重置选项 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 复制提交（拣选） | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | 查看提交的文件 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | 开始搜索 |  |
 
 ## 提交文件
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将提交的文件名复制到剪贴板
-  <kbd>c</kbd>: 检出文件
-  <kbd>d</kbd>: 放弃对此文件的提交更改
-  <kbd>o</kbd>: 打开文件
-  <kbd>e</kbd>: 编辑文件
-  <kbd>&lt;space&gt;</kbd>: 补丁中包含的切换文件
-  <kbd>a</kbd>: Toggle all files included in patch
-  <kbd>&lt;enter&gt;</kbd>: 输入文件以将所选行添加到补丁中（或切换目录折叠）
-  <kbd>`</kbd>: 切换文件树视图
-  <kbd>/</kbd>: 开始搜索
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将文件名复制到剪贴板 |  |
+| `` c `` | 检出 | 检出文件 |
+| `` d `` | Remove | 放弃对此文件的提交更改 |
+| `` o `` | 打开文件 | Open file in default application. |
+| `` e `` | Edit | Open file in external editor. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <space> `` | 补丁中包含的切换文件 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | 输入文件以将所选行添加到补丁中（或切换目录折叠） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
+| `` ` `` | 切换文件树视图 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` / `` | 开始搜索 |  |
 
 ## 提交讯息
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 确认
-  <kbd>&lt;esc&gt;</kbd>: 关闭
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 确认 |  |
+| `` <esc> `` | 关闭 |  |
 
 ## 文件
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将文件名复制到剪贴板
-  <kbd>d</kbd>: 查看'放弃更改'选项
-  <kbd>&lt;space&gt;</kbd>: 切换暂存状态
-  <kbd>&lt;c-b&gt;</kbd>: Filter files by status
-  <kbd>c</kbd>: 提交更改
-  <kbd>w</kbd>: 提交更改而无需预先提交钩子
-  <kbd>A</kbd>: 修补最后一次提交
-  <kbd>C</kbd>: 提交更改（使用编辑器编辑提交信息）
-  <kbd>e</kbd>: 编辑文件
-  <kbd>o</kbd>: 打开文件
-  <kbd>i</kbd>: 忽略文件
-  <kbd>r</kbd>: 刷新文件
-  <kbd>s</kbd>: 将所有更改加入贮藏
-  <kbd>S</kbd>: 查看贮藏选项
-  <kbd>a</kbd>: 切换所有文件的暂存状态
-  <kbd>&lt;enter&gt;</kbd>: 暂存单个 块/行 用于文件, 或 折叠/展开 目录
-  <kbd>g</kbd>: 查看上游重置选项
-  <kbd>D</kbd>: 查看重置选项
-  <kbd>`</kbd>: 切换文件树视图
-  <kbd>M</kbd>: 打开外部合并工具 (git mergetool)
-  <kbd>f</kbd>: 抓取
-  <kbd>/</kbd>: 开始搜索
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将文件名复制到剪贴板 |  |
+| `` <space> `` | 切换暂存状态 | Toggle staged for selected file. |
+| `` <c-b> `` | Filter files by status |  |
+| `` y `` | Copy to clipboard |  |
+| `` c `` | 提交更改 | Commit staged changes. |
+| `` w `` | 提交更改而无需预先提交钩子 |  |
+| `` A `` | 修补最后一次提交 |  |
+| `` C `` | 提交更改（使用编辑器编辑提交信息） |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edit | Open file in external editor. |
+| `` o `` | 打开文件 | Open file in default application. |
+| `` i `` | 忽略文件 |  |
+| `` r `` | 刷新文件 |  |
+| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
+| `` S `` | 查看贮藏选项 | View stash options (e.g. stash all, stash staged, stash unstaged). |
+| `` a `` | 切换所有文件的暂存状态 | Toggle staged/unstaged for all files in working tree. |
+| `` <enter> `` | 暂存单个 块/行 用于文件, 或 折叠/展开 目录 | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
+| `` d `` | 查看'放弃更改'选项 | View options for discarding changes to the selected file. |
+| `` g `` | 查看上游重置选项 |  |
+| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
+| `` ` `` | 切换文件树视图 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` M `` | 打开外部合并工具 (git mergetool) | Run `git mergetool`. |
+| `` f `` | 抓取 | Fetch changes from remote. |
+| `` / `` | 开始搜索 |  |
 
 ## 构建补丁中
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 选择上一个区块
-  <kbd>&lt;right&gt;</kbd>: 选择下一个区块
-  <kbd>v</kbd>: 切换拖动选择
-  <kbd>V</kbd>: 切换拖动选择
-  <kbd>a</kbd>: 切换选择区块
-  <kbd>&lt;c-o&gt;</kbd>: 将选中文本复制到剪贴板
-  <kbd>o</kbd>: 打开文件
-  <kbd>e</kbd>: 编辑文件
-  <kbd>&lt;space&gt;</kbd>: 添加/移除 行到补丁
-  <kbd>&lt;esc&gt;</kbd>: 退出逐行模式
-  <kbd>/</kbd>: 开始搜索
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 选择上一个区块 |  |
+| `` <right> `` | 选择下一个区块 |  |
+| `` v `` | 切换拖动选择 |  |
+| `` a `` | 切换选择区块 | Toggle hunk selection mode. |
+| `` <c-o> `` | 将选中文本复制到剪贴板 |  |
+| `` o `` | 打开文件 | Open file in default application. |
+| `` e `` | 编辑文件 | Open file in external editor. |
+| `` <space> `` | 添加/移除 行到补丁 |  |
+| `` <esc> `` | 退出逐行模式 |  |
+| `` / `` | 开始搜索 |  |
 
 ## 标签页面
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: 检出
-  <kbd>d</kbd>: 删除标签
-  <kbd>P</kbd>: 推送标签
-  <kbd>n</kbd>: 创建标签
-  <kbd>g</kbd>: 查看重置选项
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 查看提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 检出 | Checkout the selected tag tag as a detached HEAD. |
+| `` n `` | 创建标签 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
+| `` d `` | Delete | View delete options for local/remote tag. |
+| `` P `` | 推送标签 | Push the selected tag to a remote. You'll be prompted to select a remote. |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | 查看提交 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 正在合并
 
-<pre>
-  <kbd>e</kbd>: 编辑文件
-  <kbd>o</kbd>: 打开文件
-  <kbd>&lt;left&gt;</kbd>: 选择上一个冲突
-  <kbd>&lt;right&gt;</kbd>: 选择下一个冲突
-  <kbd>&lt;up&gt;</kbd>: 选择顶部块
-  <kbd>&lt;down&gt;</kbd>: 选择底部块
-  <kbd>z</kbd>: 撤销
-  <kbd>M</kbd>: 打开外部合并工具 (git mergetool)
-  <kbd>&lt;space&gt;</kbd>: 选中区块
-  <kbd>b</kbd>: 选中所有区块
-  <kbd>&lt;esc&gt;</kbd>: 返回文件面板
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 选中区块 |  |
+| `` b `` | 选中所有区块 |  |
+| `` <up> `` | 选择顶部块 |  |
+| `` <down> `` | 选择底部块 |  |
+| `` <left> `` | 选择上一个冲突 |  |
+| `` <right> `` | 选择下一个冲突 |  |
+| `` z `` | 撤销 | Undo last merge conflict resolution. |
+| `` e `` | 编辑文件 | Open file in external editor. |
+| `` o `` | 打开文件 | Open file in default application. |
+| `` M `` | 打开外部合并工具 (git mergetool) | Run `git mergetool`. |
+| `` <esc> `` | 返回文件面板 |  |
 
 ## 正在暂存
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 选择上一个区块
-  <kbd>&lt;right&gt;</kbd>: 选择下一个区块
-  <kbd>v</kbd>: 切换拖动选择
-  <kbd>V</kbd>: 切换拖动选择
-  <kbd>a</kbd>: 切换选择区块
-  <kbd>&lt;c-o&gt;</kbd>: 将选中文本复制到剪贴板
-  <kbd>o</kbd>: 打开文件
-  <kbd>e</kbd>: 编辑文件
-  <kbd>&lt;esc&gt;</kbd>: 返回文件面板
-  <kbd>&lt;tab&gt;</kbd>: 切换到其他面板
-  <kbd>&lt;space&gt;</kbd>: 切换行暂存状态
-  <kbd>d</kbd>: 取消变更 (git reset)
-  <kbd>E</kbd>: Edit hunk
-  <kbd>c</kbd>: 提交更改
-  <kbd>w</kbd>: 提交更改而无需预先提交钩子
-  <kbd>C</kbd>: 提交更改（使用编辑器编辑提交信息）
-  <kbd>/</kbd>: 开始搜索
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 选择上一个区块 |  |
+| `` <right> `` | 选择下一个区块 |  |
+| `` v `` | 切换拖动选择 |  |
+| `` a `` | 切换选择区块 | Toggle hunk selection mode. |
+| `` <c-o> `` | 将选中文本复制到剪贴板 |  |
+| `` <space> `` | 切换暂存状态 | 切换行暂存状态 |
+| `` d `` | 取消变更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
+| `` o `` | 打开文件 | Open file in default application. |
+| `` e `` | 编辑文件 | Open file in external editor. |
+| `` <esc> `` | 返回文件面板 |  |
+| `` <tab> `` | 切换到其他面板 | Switch to other view (staged/unstaged changes). |
+| `` E `` | Edit hunk | Edit selected hunk in external editor. |
+| `` c `` | 提交更改 | Commit staged changes. |
+| `` w `` | 提交更改而无需预先提交钩子 |  |
+| `` C `` | 提交更改（使用编辑器编辑提交信息） |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | 开始搜索 |  |
 
 ## 正常
 
-<pre>
-  <kbd>mouse wheel down</kbd>: 向下滚动 (fn+up)
-  <kbd>mouse wheel up</kbd>: 向上滚动 (fn+down)
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | 向下滚动 |  |
+| `` mouse wheel up (fn+down) `` | 向上滚动 |  |
 
 ## 状态
 
-<pre>
-  <kbd>o</kbd>: 打开配置文件
-  <kbd>e</kbd>: 编辑配置文件
-  <kbd>u</kbd>: 检查更新
-  <kbd>&lt;enter&gt;</kbd>: 切换到最近的仓库
-  <kbd>a</kbd>: 显示所有分支的日志
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | 打开配置文件 | Open file in default application. |
+| `` e `` | 编辑配置文件 | Open file in external editor. |
+| `` u `` | 检查更新 |  |
+| `` <enter> `` | 切换到最近的仓库 |  |
+| `` a `` | 显示所有分支的日志 |  |
 
 ## 确认面板
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 确认
-  <kbd>&lt;esc&gt;</kbd>: 关闭
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 确认 |  |
+| `` <esc> `` | 关闭 |  |
 
 ## 菜单
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 执行
-  <kbd>&lt;esc&gt;</kbd>: 关闭
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 执行 |  |
+| `` <esc> `` | 关闭 |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 贮藏
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: 应用
-  <kbd>g</kbd>: 应用并删除
-  <kbd>d</kbd>: 删除
-  <kbd>n</kbd>: 新分支
-  <kbd>r</kbd>: Rename stash
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 查看提交的文件
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 应用 | Apply the stash entry to your working directory. |
+| `` g `` | 应用并删除 | Apply the stash entry to your working directory and remove the stash entry. |
+| `` d `` | 删除 | Remove the stash entry from the stash list. |
+| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
+| `` r `` | Rename stash |  |
+| `` <enter> `` | 查看提交的文件 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 远程分支
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 将分支名称复制到剪贴板
-  <kbd>&lt;space&gt;</kbd>: 检出
-  <kbd>n</kbd>: 新分支
-  <kbd>M</kbd>: 合并到当前检出的分支
-  <kbd>r</kbd>: 将已检出的分支变基到该分支
-  <kbd>d</kbd>: 删除分支
-  <kbd>u</kbd>: 设置为检出分支的上游
-  <kbd>g</kbd>: 查看重置选项
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 查看提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 将分支名称复制到剪贴板 |  |
+| `` <space> `` | 检出 | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
+| `` n `` | 新分支 |  |
+| `` M `` | 合并到当前检出的分支 | Merge selected branch into currently checked out branch. |
+| `` r `` | 将已检出的分支变基到该分支 | Rebase the checked-out branch onto the selected branch. |
+| `` d `` | Delete | Delete the remote branch from the remote. |
+| `` u `` | Set as upstream | 设置为检出分支的上游 |
+| `` s `` | Sort order |  |
+| `` g `` | 查看重置选项 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | 查看提交 |  |
+| `` w `` | View worktree options |  |
+| `` / `` | Filter the current view by text |  |
 
 ## 远程页面
 
-<pre>
-  <kbd>f</kbd>: 抓取远程仓库
-  <kbd>n</kbd>: 添加新的远程仓库
-  <kbd>d</kbd>: 删除远程
-  <kbd>e</kbd>: 编辑远程仓库
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | View branches |  |
+| `` n `` | 添加新的远程仓库 |  |
+| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
+| `` e `` | Edit | 编辑远程仓库 |
+| `` f `` | 抓取 | 抓取远程仓库 |
+| `` / `` | Filter the current view by text |  |

docs/keybindings/Keybindings_zh-TW.md

@@ -1,353 +1,364 @@
-_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go run scripts/cheatsheet/main.go generate` from the project root._
+_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
 
 # Lazygit 鍵盤快捷鍵
 
-_說明：`<c-b>` 表示 Ctrl+B、`<a-b>` 表示 Alt+B，`B`表示 Shift+B_
+_說明：`<c-b>` 表示 Ctrl＋B、`<a-b>` 表示 Alt＋B，`B`表示 Shift＋B_
 
-## 全局快捷鍵
+## 全域快捷鍵
 
-<pre>
-  <kbd>&lt;c-r&gt;</kbd>: 切換到最近使用的版本庫
-  <kbd>&lt;pgup&gt;</kbd>: 向上捲動主面板 (fn+up/shift+k)
-  <kbd>&lt;pgdown&gt;</kbd>: 向下捲動主面板 (fn+down/shift+j)
-  <kbd>@</kbd>: 開啟命令記錄選單
-  <kbd>}</kbd>: 增加差異檢視中顯示變更周圍上下文的大小
-  <kbd>{</kbd>: 減小差異檢視中顯示變更周圍上下文的大小
-  <kbd>:</kbd>: 執行自訂命令
-  <kbd>&lt;c-p&gt;</kbd>: 檢視自訂補丁選項
-  <kbd>m</kbd>: 查看合併/變基選項
-  <kbd>R</kbd>: 重新整理
-  <kbd>+</kbd>: 下一個螢幕模式（常規/半螢幕/全螢幕）
-  <kbd>_</kbd>: 上一個螢幕模式
-  <kbd>?</kbd>: 開啟選單
-  <kbd>&lt;c-s&gt;</kbd>: 檢視篩選路徑選項
-  <kbd>W</kbd>: 開啟差異比較選單
-  <kbd>&lt;c-e&gt;</kbd>: 開啟差異比較選單
-  <kbd>&lt;c-w&gt;</kbd>: 切換是否在差異檢視中顯示空格變更
-  <kbd>z</kbd>: 復原
-  <kbd>&lt;c-z&gt;</kbd>: 取消復原
-  <kbd>P</kbd>: 推送
-  <kbd>p</kbd>: 拉取
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-r> `` | 切換到最近使用的版本庫 |  |
+| `` <pgup> (fn+up/shift+k) `` | 向上捲動主面板 |  |
+| `` <pgdown> (fn+down/shift+j) `` | 向下捲動主面板 |  |
+| `` @ `` | 開啟命令記錄選單 | View options for the command log e.g. show/hide the command log and focus the command log. |
+| `` P `` | 推送 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` p `` | 拉取 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
+| `` } `` | 增加差異檢視中顯示變更周圍上下文的大小 | Increase the amount of the context shown around changes in the diff view. |
+| `` { `` | 減小差異檢視中顯示變更周圍上下文的大小 | Decrease the amount of the context shown around changes in the diff view. |
+| `` : `` | 執行自訂命令 | Bring up a prompt where you can enter a shell command to execute. Not to be confused with pre-configured custom commands. |
+| `` <c-p> `` | 檢視自訂補丁選項 |  |
+| `` m `` | 查看合併/變基選項 | View options to abort/continue/skip the current merge/rebase. |
+| `` R `` | 重新整理 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
+| `` + `` | 下一個螢幕模式（常規/半螢幕/全螢幕） |  |
+| `` _ `` | 上一個螢幕模式 |  |
+| `` ? `` | 開啟選單 |  |
+| `` <c-s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
+| `` W `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` <c-e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
+| `` q `` | 結束 |  |
+| `` <esc> `` | 取消 |  |
+| `` <c-w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view. |
+| `` z `` | 復原 | 將使用 reflog 確任 git 指令以復原。這不包括工作區更改；只考慮提交。 |
+| `` <c-z> `` | 取消復原 | 將使用 reflog 確任 git 指令以重作。這不包括工作區更改；只考慮提交。 |
 
-## 列表面板導航
+## 移動
 
-<pre>
-  <kbd>,</kbd>: 上一頁
-  <kbd>.</kbd>: 下一頁
-  <kbd>&lt;</kbd>: 捲動到頂部
-  <kbd>&gt;</kbd>: 捲動到底部
-  <kbd>/</kbd>: 開始搜尋
-  <kbd>H</kbd>: 向左捲動
-  <kbd>L</kbd>: 向右捲動
-  <kbd>]</kbd>: 下一個索引標籤
-  <kbd>[</kbd>: 上一個索引標籤
-</pre>
-
-## Reflog
-
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製提交 SHA 到剪貼簿
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 檢出提交
-  <kbd>y</kbd>: 複製提交屬性
-  <kbd>o</kbd>: 在瀏覽器中開啟提交
-  <kbd>n</kbd>: 從提交建立新分支
-  <kbd>g</kbd>: 檢視重設選項
-  <kbd>c</kbd>: 複製提交 (揀選)
-  <kbd>C</kbd>: 複製提交範圍 (揀選)
-  <kbd>&lt;c-r&gt;</kbd>: 重設選定的揀選 (複製) 提交
-  <kbd>&lt;enter&gt;</kbd>: 檢視提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
-
-## Worktrees
-
-<pre>
-  <kbd>n</kbd>: Create worktree
-  <kbd>&lt;space&gt;</kbd>: Switch to worktree
-  <kbd>&lt;enter&gt;</kbd>: Switch to worktree
-  <kbd>o</kbd>: Open in editor
-  <kbd>d</kbd>: Remove worktree
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
-
-## 主視窗 (一般)
-
-<pre>
-  <kbd>mouse wheel down</kbd>: 向下捲動 (fn+up)
-  <kbd>mouse wheel up</kbd>: 向上捲動 (fn+down)
-</pre>
-
-## 主視窗 (合併中)
-
-<pre>
-  <kbd>e</kbd>: 編輯檔案
-  <kbd>o</kbd>: 開啟檔案
-  <kbd>&lt;left&gt;</kbd>: 選擇上一個衝突
-  <kbd>&lt;right&gt;</kbd>: 選擇下一個衝突
-  <kbd>&lt;up&gt;</kbd>: 選擇上一段
-  <kbd>&lt;down&gt;</kbd>: 選擇下一段
-  <kbd>z</kbd>: 復原
-  <kbd>M</kbd>: 開啟外部合併工具 (git mergetool)
-  <kbd>&lt;space&gt;</kbd>: 挑選程式碼片段
-  <kbd>b</kbd>: 挑選所有程式碼片段
-  <kbd>&lt;esc&gt;</kbd>: 返回檔案面板
-</pre>
-
-## 主視窗 (預存中)
-
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 選擇上一段
-  <kbd>&lt;right&gt;</kbd>: 選擇下一段
-  <kbd>v</kbd>: 切換拖曳選擇
-  <kbd>V</kbd>: 切換拖曳選擇
-  <kbd>a</kbd>: 切換選擇程式碼塊
-  <kbd>&lt;c-o&gt;</kbd>: 複製所選文本至剪貼簿
-  <kbd>o</kbd>: 開啟檔案
-  <kbd>e</kbd>: 編輯檔案
-  <kbd>&lt;esc&gt;</kbd>: 返回檔案面板
-  <kbd>&lt;tab&gt;</kbd>: 切換至另一個面板 (已預存/未預存更改)
-  <kbd>&lt;space&gt;</kbd>: 切換現有行的狀態 (已預存/未預存)
-  <kbd>d</kbd>: 刪除變更 (git reset)
-  <kbd>E</kbd>: 編輯程式碼塊
-  <kbd>c</kbd>: 提交變更
-  <kbd>w</kbd>: 沒有預提交 hook 就提交更改
-  <kbd>C</kbd>: 使用 git 編輯器提交變更
-  <kbd>/</kbd>: 開始搜尋
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` , `` | 上一頁 |  |
+| `` . `` | 下一頁 |  |
+| `` < `` | 捲動到頂部 |  |
+| `` > `` | 捲動到底部 |  |
+| `` v `` | 切換拖曳選擇 |  |
+| `` <s-down> `` | Range select down |  |
+| `` <s-up> `` | Range select up |  |
+| `` / `` | 搜尋 |  |
+| `` H `` | 向左捲動 |  |
+| `` L `` | 向右捲動 |  |
+| `` ] `` | 下一個索引標籤 |  |
+| `` [ `` | 上一個索引標籤 |  |
 
 ## 主面板 (補丁生成)
 
-<pre>
-  <kbd>&lt;left&gt;</kbd>: 選擇上一段
-  <kbd>&lt;right&gt;</kbd>: 選擇下一段
-  <kbd>v</kbd>: 切換拖曳選擇
-  <kbd>V</kbd>: 切換拖曳選擇
-  <kbd>a</kbd>: 切換選擇程式碼塊
-  <kbd>&lt;c-o&gt;</kbd>: 複製所選文本至剪貼簿
-  <kbd>o</kbd>: 開啟檔案
-  <kbd>e</kbd>: 編輯檔案
-  <kbd>&lt;space&gt;</kbd>: 向 (或從) 補丁中添加/刪除行
-  <kbd>&lt;esc&gt;</kbd>: 退出自訂補丁建立器
-  <kbd>/</kbd>: 開始搜尋
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 選擇上一段 |  |
+| `` <right> `` | 選擇下一段 |  |
+| `` v `` | 切換拖曳選擇 |  |
+| `` a `` | 切換選擇程式碼塊 | Toggle hunk selection mode. |
+| `` <c-o> `` | 複製所選文本至剪貼簿 |  |
+| `` o `` | 開啟檔案 | Open file in default application. |
+| `` e `` | 編輯檔案 | Open file in external editor. |
+| `` <space> `` | 向 (或從) 補丁中添加/刪除行 |  |
+| `` <esc> `` | 退出自訂補丁建立器 |  |
+| `` / `` | 搜尋 |  |
+
+## 主面板（一般）
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` mouse wheel down (fn+up) `` | 向下捲動 |  |
+| `` mouse wheel up (fn+down) `` | 向上捲動 |  |
+
+## 主面板（合併）
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 挑選程式碼片段 |  |
+| `` b `` | 挑選所有程式碼片段 |  |
+| `` <up> `` | 選擇上一段 |  |
+| `` <down> `` | 選擇下一段 |  |
+| `` <left> `` | 選擇上一個衝突 |  |
+| `` <right> `` | 選擇下一個衝突 |  |
+| `` z `` | 復原 | Undo last merge conflict resolution. |
+| `` e `` | 編輯檔案 | Open file in external editor. |
+| `` o `` | 開啟檔案 | Open file in default application. |
+| `` M `` | 開啟外部合併工具 (git mergetool) | Run `git mergetool`. |
+| `` <esc> `` | 返回檔案面板 |  |
+
+## 主面板（預存）
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <left> `` | 選擇上一段 |  |
+| `` <right> `` | 選擇下一段 |  |
+| `` v `` | 切換拖曳選擇 |  |
+| `` a `` | 切換選擇程式碼塊 | Toggle hunk selection mode. |
+| `` <c-o> `` | 複製所選文本至剪貼簿 |  |
+| `` <space> `` | 切換預存 | 切換現有行的狀態 (已預存/未預存) |
+| `` d `` | 刪除變更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
+| `` o `` | 開啟檔案 | Open file in default application. |
+| `` e `` | 編輯檔案 | Open file in external editor. |
+| `` <esc> `` | 返回檔案面板 |  |
+| `` <tab> `` | 切換至另一個面板 (已預存/未預存更改) | Switch to other view (staged/unstaged changes). |
+| `` E `` | 編輯程式碼塊 | Edit selected hunk in external editor. |
+| `` c `` | 提交變更 | Commit staged changes. |
+| `` w `` | 沒有預提交 hook 就提交更改 |  |
+| `` C `` | 使用 git 編輯器提交變更 |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` / `` | 搜尋 |  |
 
 ## 功能表
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 執行
-  <kbd>&lt;esc&gt;</kbd>: 關閉
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 執行 |  |
+| `` <esc> `` | 關閉 |  |
+| `` / `` | 搜尋 |  |
 
 ## 子提交
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製提交 SHA 到剪貼簿
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 檢出提交
-  <kbd>y</kbd>: 複製提交屬性
-  <kbd>o</kbd>: 在瀏覽器中開啟提交
-  <kbd>n</kbd>: 從提交建立新分支
-  <kbd>g</kbd>: 檢視重設選項
-  <kbd>c</kbd>: 複製提交 (揀選)
-  <kbd>C</kbd>: 複製提交範圍 (揀選)
-  <kbd>&lt;c-r&gt;</kbd>: 重設選定的揀選 (複製) 提交
-  <kbd>&lt;enter&gt;</kbd>: 檢視所選項目的檔案
-  <kbd>/</kbd>: 開始搜尋
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製提交 hash 到剪貼簿 |  |
+| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 在瀏覽器中開啟提交 |  |
+| `` n `` | 從提交建立新分支 |  |
+| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | 重設選定的揀選 (複製) 提交 |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | 檢視所選項目的檔案 |  |
+| `` w `` | 檢視工作目錄選項 |  |
+| `` / `` | 搜尋 |  |
 
 ## 子模組
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製子模組名稱到剪貼簿
-  <kbd>&lt;enter&gt;</kbd>: 進入子模組
-  <kbd>&lt;space&gt;</kbd>: 進入子模組
-  <kbd>d</kbd>: 移除子模組
-  <kbd>u</kbd>: 更新子模組
-  <kbd>n</kbd>: 新增子模組
-  <kbd>e</kbd>: 更新子模組 URL
-  <kbd>i</kbd>: 初始化子模組
-  <kbd>b</kbd>: 查看批量子模組選項
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製子模組名稱到剪貼簿 |  |
+| `` <enter> `` | Enter | 進入子模組 |
+| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
+| `` u `` | Update | 更新子模組 |
+| `` n `` | 新增子模組 |  |
+| `` e `` | 更新子模組 URL |  |
+| `` i `` | Initialize | 初始化子模組 |
+| `` b `` | 查看批量子模組選項 |  |
+| `` / `` | 搜尋 |  |
+
+## 工作目錄
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` n `` | New worktree |  |
+| `` <space> `` | Switch | Switch to the selected worktree. |
+| `` o `` | Open in editor |  |
+| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
+| `` / `` | 搜尋 |  |
 
 ## 提交
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製提交 SHA 到剪貼簿
-  <kbd>&lt;c-r&gt;</kbd>: 重設選定的揀選 (複製) 提交
-  <kbd>b</kbd>: 查看二分選項
-  <kbd>s</kbd>: 向下壓縮
-  <kbd>f</kbd>: 修復提交 (Fixup)
-  <kbd>r</kbd>: 改寫提交
-  <kbd>R</kbd>: 使用編輯器改寫提交
-  <kbd>d</kbd>: 刪除提交
-  <kbd>e</kbd>: 編輯提交
-  <kbd>p</kbd>: 挑選提交 (於變基過程中)
-  <kbd>F</kbd>: 為此提交建立修復提交
-  <kbd>S</kbd>: 壓縮上方所有的“fixup!”提交 (自動壓縮)
-  <kbd>&lt;c-j&gt;</kbd>: 向下移動提交
-  <kbd>&lt;c-k&gt;</kbd>: 向上移動提交
-  <kbd>v</kbd>: 貼上提交 (揀選)
-  <kbd>B</kbd>: Mark commit as base commit for rebase
-  <kbd>A</kbd>: 使用已預存的更改修正提交
-  <kbd>a</kbd>: 設置/重設提交作者
-  <kbd>t</kbd>: 還原提交
-  <kbd>T</kbd>: 打標籤到提交
-  <kbd>&lt;c-l&gt;</kbd>: 開啟記錄選單
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;space&gt;</kbd>: 檢出提交
-  <kbd>y</kbd>: 複製提交屬性
-  <kbd>o</kbd>: 在瀏覽器中開啟提交
-  <kbd>n</kbd>: 從提交建立新分支
-  <kbd>g</kbd>: 檢視重設選項
-  <kbd>c</kbd>: 複製提交 (揀選)
-  <kbd>C</kbd>: 複製提交範圍 (揀選)
-  <kbd>&lt;enter&gt;</kbd>: 檢視所選項目的檔案
-  <kbd>/</kbd>: 開始搜尋
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製提交 hash 到剪貼簿 |  |
+| `` <c-r> `` | 重設選定的揀選 (複製) 提交 |  |
+| `` b `` | 查看二分選項 |  |
+| `` s `` | 壓縮 (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
+| `` f `` | 修復 (Fixup) | Meld the selected commit into the commit below it. Similar to fixup, but the selected commit's message will be discarded. |
+| `` r `` | 改寫提交 | Reword the selected commit's message. |
+| `` R `` | 使用編輯器改寫提交 |  |
+| `` d `` | 刪除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
+| `` e `` | Edit (start interactive rebase) | 編輯提交 |
+| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.
+If you would instead like to start an interactive rebase from the selected commit, press `e`. |
+| `` p `` | Pick | 挑選提交 (於變基過程中) |
+| `` F `` | 建立修復提交 | 為此提交建立修復提交 |
+| `` S `` | 壓縮上方所有「fixup」提交（自動壓縮） | 是否壓縮上方 {{.commit}} 所有「fixup」提交？ |
+| `` <c-j> `` | 向下移動提交 |  |
+| `` <c-k> `` | 向上移動提交 |  |
+| `` V `` | 貼上提交 (揀選) |  |
+| `` B `` | 為了變基已標注提交為基準提交 | 請為了下一次變基選擇一項基準提交；此將執行 `git rebase --onto`。 |
+| `` A `` | Amend | 使用已預存的更改修正提交 |
+| `` a `` | 設定/重設提交作者 | Set/Reset commit author or set co-author. |
+| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
+| `` T `` | 打標籤到提交 | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
+| `` <c-l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
+| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 在瀏覽器中開啟提交 |  |
+| `` n `` | 從提交建立新分支 |  |
+| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | 檢視所選項目的檔案 |  |
+| `` w `` | 檢視工作目錄選項 |  |
+| `` / `` | 搜尋 |  |
 
 ## 提交摘要
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 確認
-  <kbd>&lt;esc&gt;</kbd>: 關閉
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 確認 |  |
+| `` <esc> `` | 關閉 |  |
 
 ## 提交檔案
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製提交的檔案名稱到剪貼簿
-  <kbd>c</kbd>: 檢出檔案
-  <kbd>d</kbd>: 捨棄此提交對此檔案的更改
-  <kbd>o</kbd>: 開啟檔案
-  <kbd>e</kbd>: 編輯檔案
-  <kbd>&lt;space&gt;</kbd>: 切換檔案是否包含在補丁中
-  <kbd>a</kbd>: 切換所有檔案是否包含在補丁中
-  <kbd>&lt;enter&gt;</kbd>: 輸入檔案以將選定的行添加至補丁（或切換目錄折疊）
-  <kbd>`</kbd>: 切換檔案樹狀視圖
-  <kbd>/</kbd>: 開始搜尋
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製檔案名稱到剪貼簿 |  |
+| `` c `` | 檢出 | 檢出檔案 |
+| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
+| `` o `` | 開啟檔案 | Open file in default application. |
+| `` e `` | Edit | Open file in external editor. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <space> `` | 切換檔案是否包含在補丁中 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` a `` | 切換所有檔案是否包含在補丁中 | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
+| `` <enter> `` | 輸入檔案以將選定的行添加至補丁（或切換目錄折疊） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
+| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` / `` | 搜尋 |  |
 
 ## 收藏 (Stash)
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: 套用
-  <kbd>g</kbd>: 還原
-  <kbd>d</kbd>: 捨棄
-  <kbd>n</kbd>: 新分支
-  <kbd>r</kbd>: 重新命名收藏
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 檢視所選項目的檔案
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 套用 | Apply the stash entry to your working directory. |
+| `` g `` | 還原 | Apply the stash entry to your working directory and remove the stash entry. |
+| `` d `` | 捨棄 | Remove the stash entry from the stash list. |
+| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
+| `` r `` | 重新命名收藏 |  |
+| `` <enter> `` | 檢視所選項目的檔案 |  |
+| `` w `` | 檢視工作目錄選項 |  |
+| `` / `` | 搜尋 |  |
+
+## 日誌
+
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製提交 hash 到剪貼簿 |  |
+| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
+| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
+| `` o `` | 在瀏覽器中開啟提交 |  |
+| `` n `` | 從提交建立新分支 |  |
+| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
+| `` <c-r> `` | 重設選定的揀選 (複製) 提交 |  |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` <enter> `` | 檢視提交 |  |
+| `` w `` | 檢視工作目錄選項 |  |
+| `` / `` | 搜尋 |  |
 
 ## 本地分支
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製分支名稱到剪貼簿
-  <kbd>i</kbd>: 顯示 git-flow 選項
-  <kbd>&lt;space&gt;</kbd>: 檢出
-  <kbd>n</kbd>: 新分支
-  <kbd>o</kbd>: 建立拉取請求
-  <kbd>O</kbd>: 建立拉取請求選項
-  <kbd>&lt;c-y&gt;</kbd>: 複製拉取請求的 URL 到剪貼板
-  <kbd>c</kbd>: 根據名稱檢出
-  <kbd>F</kbd>: 強制檢出
-  <kbd>d</kbd>: 刪除分支
-  <kbd>r</kbd>: 將已檢出的分支變基至此分支
-  <kbd>M</kbd>: 合併到當前檢出的分支
-  <kbd>f</kbd>: 從上游快進此分支
-  <kbd>T</kbd>: 建立標籤
-  <kbd>g</kbd>: 檢視重設選項
-  <kbd>R</kbd>: 重新命名分支
-  <kbd>u</kbd>: 設定/取消設定上游
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 檢視提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製分支名稱到剪貼簿 |  |
+| `` i `` | 顯示 git-flow 選項 |  |
+| `` <space> `` | 檢出 | Checkout selected item. |
+| `` n `` | 新分支 |  |
+| `` o `` | 建立拉取請求 |  |
+| `` O `` | 建立拉取請求選項 |  |
+| `` <c-y> `` | 複製拉取請求的 URL 到剪貼板 |  |
+| `` c `` | 根據名稱檢出 | Checkout by name. In the input box you can enter '-' to switch to the last branch. |
+| `` F `` | 強制檢出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
+| `` d `` | Delete | View delete options for local/remote branch. |
+| `` r `` | 將已檢出的分支變基至此分支 | Rebase the checked-out branch onto the selected branch. |
+| `` M `` | 合併到當前檢出的分支 | Merge selected branch into currently checked out branch. |
+| `` f `` | 從上游快進此分支 | Fast-forward selected branch from its upstream. |
+| `` T `` | 建立標籤 |  |
+| `` s `` | Sort order |  |
+| `` g `` | 檢視重設選項 |  |
+| `` R `` | 重新命名分支 |  |
+| `` u `` | 檢視上游設定 | 檢視有關上游分支的設定（例如重設至上游） |
+| `` <enter> `` | 檢視提交 |  |
+| `` w `` | 檢視工作目錄選項 |  |
+| `` / `` | 搜尋 |  |
 
 ## 標籤
 
-<pre>
-  <kbd>&lt;space&gt;</kbd>: 檢出
-  <kbd>d</kbd>: 刪除標籤
-  <kbd>P</kbd>: 推送標籤
-  <kbd>n</kbd>: 建立標籤
-  <kbd>g</kbd>: 檢視重設選項
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 檢視提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <space> `` | 檢出 | Checkout the selected tag tag as a detached HEAD. |
+| `` n `` | 建立標籤 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
+| `` d `` | Delete | View delete options for local/remote tag. |
+| `` P `` | 推送標籤 | Push the selected tag to a remote. You'll be prompted to select a remote. |
+| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | 檢視提交 |  |
+| `` w `` | 檢視工作目錄選項 |  |
+| `` / `` | 搜尋 |  |
 
 ## 檔案
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製檔案名稱到剪貼簿
-  <kbd>d</kbd>: 檢視“捨棄更改”的選項
-  <kbd>&lt;space&gt;</kbd>: 切換預存
-  <kbd>&lt;c-b&gt;</kbd>: 篩選檔案 (預存/未預存)
-  <kbd>c</kbd>: 提交變更
-  <kbd>w</kbd>: 沒有預提交 hook 就提交更改
-  <kbd>A</kbd>: 修正上次提交
-  <kbd>C</kbd>: 使用 git 編輯器提交變更
-  <kbd>e</kbd>: 編輯檔案
-  <kbd>o</kbd>: 開啟檔案
-  <kbd>i</kbd>: 忽略或排除檔案
-  <kbd>r</kbd>: 重新整理檔案
-  <kbd>s</kbd>: 收藏所有變更
-  <kbd>S</kbd>: 檢視收藏選項
-  <kbd>a</kbd>: 全部預存/取消預存
-  <kbd>&lt;enter&gt;</kbd>: 選擇檔案中的單個程式碼塊/行，或展開/折疊目錄
-  <kbd>g</kbd>: 檢視上游重設選項
-  <kbd>D</kbd>: 檢視重設選項
-  <kbd>`</kbd>: 切換檔案樹狀視圖
-  <kbd>M</kbd>: 開啟外部合併工具 (git mergetool)
-  <kbd>f</kbd>: 擷取
-  <kbd>/</kbd>: 開始搜尋
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製檔案名稱到剪貼簿 |  |
+| `` <space> `` | 切換預存 | Toggle staged for selected file. |
+| `` <c-b> `` | 篩選檔案 (預存/未預存) |  |
+| `` y `` | Copy to clipboard |  |
+| `` c `` | 提交變更 | Commit staged changes. |
+| `` w `` | 沒有預提交 hook 就提交更改 |  |
+| `` A `` | 修改上次提交 |  |
+| `` C `` | 使用 git 編輯器提交變更 |  |
+| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
+| `` e `` | Edit | Open file in external editor. |
+| `` o `` | 開啟檔案 | Open file in default application. |
+| `` i `` | 忽略或排除檔案 |  |
+| `` r `` | 重新整理檔案 |  |
+| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
+| `` S `` | 檢視收藏選項 | View stash options (e.g. stash all, stash staged, stash unstaged). |
+| `` a `` | 全部預存/取消預存 | Toggle staged/unstaged for all files in working tree. |
+| `` <enter> `` | 選擇檔案中的單個程式碼塊/行，或展開/折疊目錄 | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
+| `` d `` | Discard | View options for discarding changes to the selected file. |
+| `` g `` | 檢視上游重設選項 |  |
+| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
+| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory. |
+| `` <c-t> `` | Open external diff tool (git difftool) |  |
+| `` M `` | 開啟外部合併工具 (git mergetool) | Run `git mergetool`. |
+| `` f `` | 擷取 | Fetch changes from remote. |
+| `` / `` | 搜尋 |  |
 
 ## 狀態
 
-<pre>
-  <kbd>o</kbd>: 開啟設定檔案
-  <kbd>e</kbd>: 編輯設定檔案
-  <kbd>u</kbd>: 檢查更新
-  <kbd>&lt;enter&gt;</kbd>: 切換到最近使用的版本庫
-  <kbd>a</kbd>: 顯示所有分支日誌
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` o `` | 開啟設定檔案 | Open file in default application. |
+| `` e `` | 編輯設定檔案 | Open file in external editor. |
+| `` u `` | 檢查更新 |  |
+| `` <enter> `` | 切換到最近使用的版本庫 |  |
+| `` a `` | 顯示所有分支日誌 |  |
 
 ## 確認面板
 
-<pre>
-  <kbd>&lt;enter&gt;</kbd>: 確認
-  <kbd>&lt;esc&gt;</kbd>: 關閉/取消
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | 確認 |  |
+| `` <esc> `` | 關閉/取消 |  |
 
 ## 遠端
 
-<pre>
-  <kbd>f</kbd>: 擷取遠端
-  <kbd>n</kbd>: 新增遠端
-  <kbd>d</kbd>: 移除遠端
-  <kbd>e</kbd>: 編輯遠端
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <enter> `` | View branches |  |
+| `` n `` | 新增遠端 |  |
+| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
+| `` e `` | Edit | 編輯遠端 |
+| `` f `` | 擷取 | 擷取遠端 |
+| `` / `` | 搜尋 |  |
 
 ## 遠端分支
 
-<pre>
-  <kbd>&lt;c-o&gt;</kbd>: 複製分支名稱到剪貼簿
-  <kbd>&lt;space&gt;</kbd>: 檢出
-  <kbd>n</kbd>: 新分支
-  <kbd>M</kbd>: 合併到當前檢出的分支
-  <kbd>r</kbd>: 將已檢出的分支變基至此分支
-  <kbd>d</kbd>: 刪除分支
-  <kbd>u</kbd>: 將此分支設為當前分支之上游
-  <kbd>g</kbd>: 檢視重設選項
-  <kbd>w</kbd>: View worktree options
-  <kbd>&lt;enter&gt;</kbd>: 檢視提交
-  <kbd>/</kbd>: Filter the current view by text
-</pre>
+| Key | Action | Info |
+|-----|--------|-------------|
+| `` <c-o> `` | 複製分支名稱到剪貼簿 |  |
+| `` <space> `` | 檢出 | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
+| `` n `` | 新分支 |  |
+| `` M `` | 合併到當前檢出的分支 | Merge selected branch into currently checked out branch. |
+| `` r `` | 將已檢出的分支變基至此分支 | Rebase the checked-out branch onto the selected branch. |
+| `` d `` | Delete | Delete the remote branch from the remote. |
+| `` u `` | Set as upstream | 將此分支設為當前分支之上游 |
+| `` s `` | Sort order |  |
+| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
+| `` <enter> `` | 檢視提交 |  |
+| `` w `` | 檢視工作目錄選項 |  |
+| `` / `` | 搜尋 |  |

go.mod

@@ -1,32 +1,31 @@
 module github.com/jesseduffield/lazygit
 
-go 1.20
+go 1.21
 
 require (
-	github.com/OpenPeeDeeP/xdg v1.0.0
+	github.com/adrg/xdg v0.4.0
 	github.com/atotto/clipboard v0.1.4
 	github.com/aybabtme/humanlog v0.4.1
 	github.com/cloudfoundry/jibber_jabber v0.0.0-20151120183258-bcc4c8345a21
 	github.com/creack/pty v1.1.11
-	github.com/fsmiamoto/git-todo-parser v0.0.5
-	github.com/gdamore/tcell/v2 v2.6.0
-	github.com/go-errors/errors v1.4.2
+	github.com/gdamore/tcell/v2 v2.7.4
+	github.com/go-errors/errors v1.5.1
 	github.com/gookit/color v1.4.2
 	github.com/imdario/mergo v0.3.11
 	github.com/integrii/flaggy v1.4.0
 	github.com/jesseduffield/generics v0.0.0-20220320043834-727e535cbe68
 	github.com/jesseduffield/go-git/v5 v5.1.2-0.20221018185014-fdd53fef665d
-	github.com/jesseduffield/gocui v0.3.1-0.20230802092815-ae0a5c181634
+	github.com/jesseduffield/gocui v0.3.1-0.20240418080333-8cd33929c513
 	github.com/jesseduffield/kill v0.0.0-20220618033138-bfbe04675d10
 	github.com/jesseduffield/lazycore v0.0.0-20221012050358-03d2e40243c5
 	github.com/jesseduffield/minimal/gitignore v0.3.3-0.20211018110810-9cde264e6b1e
-	github.com/jesseduffield/yaml v2.1.0+incompatible
 	github.com/kardianos/osext v0.0.0-20190222173326-2bc1f35cddc0
+	github.com/karimkhaleel/jsonschema v0.0.0-20231001195015-d933f0d94ea3
 	github.com/kyokomi/emoji/v2 v2.2.8
 	github.com/lucasb-eyer/go-colorful v1.2.0
 	github.com/mattn/go-runewidth v0.0.15
 	github.com/mgutz/str v1.2.0
-	github.com/pmezard/go-difflib v1.0.0
+	github.com/mitchellh/go-ps v1.0.0
 	github.com/sahilm/fuzzy v0.1.0
 	github.com/samber/lo v1.31.0
 	github.com/sanity-io/litter v1.5.2
@@ -34,7 +33,8 @@ require (
 	github.com/sirupsen/logrus v1.4.2
 	github.com/spf13/afero v1.9.5
 	github.com/spkg/bom v0.0.0-20160624110644-59b7046e48ad
-	github.com/stretchr/testify v1.8.0
+	github.com/stefanhaller/git-todo-parser v0.0.7-0.20240406123903-fd957137b6e2
+	github.com/stretchr/testify v1.8.1
 	github.com/xo/terminfo v0.0.0-20210125001918-ca9a967f8778
 	golang.org/x/exp v0.0.0-20220318154914-8dddf5d87bd8
 	gopkg.in/ozeidan/fuzzy-patricia.v3 v3.0.0
@@ -42,35 +42,39 @@ require (
 )
 
 require (
+	github.com/bahlo/generic-list-go v0.2.0 // indirect
+	github.com/buger/jsonparser v1.1.1 // indirect
 	github.com/davecgh/go-spew v1.1.1 // indirect
 	github.com/emirpasic/gods v1.12.0 // indirect
 	github.com/fatih/color v1.9.0 // indirect
-	github.com/gdamore/encoding v1.0.0 // indirect
+	github.com/gdamore/encoding v1.0.1 // indirect
 	github.com/go-git/gcfg v1.5.0 // indirect
 	github.com/go-git/go-billy/v5 v5.0.0 // indirect
 	github.com/go-logfmt/logfmt v0.5.0 // indirect
 	github.com/gobwas/glob v0.2.3 // indirect
 	github.com/google/go-cmp v0.5.6 // indirect
+	github.com/invopop/jsonschema v0.10.0 // indirect
 	github.com/jbenet/go-context v0.0.0-20150711004518-d14ea06fba99 // indirect
 	github.com/kevinburke/ssh_config v0.0.0-20190725054713-01f96b0aa0cd // indirect
 	github.com/konsorten/go-windows-terminal-sequences v1.0.2 // indirect
 	github.com/kr/logfmt v0.0.0-20140226030751-b84e30acd515 // indirect
 	github.com/kylelemons/godebug v1.1.0 // indirect
+	github.com/mailru/easyjson v0.7.7 // indirect
 	github.com/mattn/go-colorable v0.1.11 // indirect
 	github.com/mattn/go-isatty v0.0.14 // indirect
 	github.com/mitchellh/go-homedir v1.1.0 // indirect
 	github.com/onsi/ginkgo v1.10.3 // indirect
 	github.com/onsi/gomega v1.7.1 // indirect
 	github.com/petermattis/goid v0.0.0-20180202154549-b0b1615b78e5 // indirect
-	github.com/rivo/uniseg v0.4.4 // indirect
+	github.com/pmezard/go-difflib v1.0.0 // indirect
+	github.com/rivo/uniseg v0.4.7 // indirect
 	github.com/sergi/go-diff v1.1.0 // indirect
+	github.com/wk8/go-ordered-map/v2 v2.1.8 // indirect
 	github.com/xanzy/ssh-agent v0.2.1 // indirect
 	golang.org/x/crypto v0.0.0-20220722155217-630584e8d5aa // indirect
 	golang.org/x/net v0.7.0 // indirect
-	golang.org/x/sys v0.10.0 // indirect
-	golang.org/x/term v0.10.0 // indirect
-	golang.org/x/text v0.11.0 // indirect
+	golang.org/x/sys v0.19.0 // indirect
+	golang.org/x/term v0.19.0 // indirect
+	golang.org/x/text v0.14.0 // indirect
 	gopkg.in/warnings.v0 v0.1.2 // indirect
 )
-
-replace github.com/gdamore/tcell/v2 v2.6.0 => github.com/stefanhaller/tcell/v2 v2.6.1

go.sum

@@ -38,8 +38,8 @@ cloud.google.com/go/storage v1.14.0/go.mod h1:GrKmX003DSIwi9o29oFT7YDnHYwZoctc3f
 dmitri.shuralyov.com/gpu/mtl v0.0.0-20190408044501-666a987793e9/go.mod h1:H6x//7gZCb22OMCxBHrMx7a5I7Hp++hsVxbQ4BYO7hU=
 github.com/BurntSushi/toml v0.3.1/go.mod h1:xHWCNGjB5oqiDr8zfno3MHue2Ht5sIBksp03qcyfWMU=
 github.com/BurntSushi/xgb v0.0.0-20160522181843-27f122750802/go.mod h1:IVnqGOEym/WlBOVXweHU+Q+/VP0lqqI8lqeDx9IjBqo=
-github.com/OpenPeeDeeP/xdg v1.0.0 h1:UDLmNjCGFZZCaVMB74DqYEtXkHxnTxcr4FeJVF9uCn8=
-github.com/OpenPeeDeeP/xdg v1.0.0/go.mod h1:tMoSueLQlMf0TCldjrJLNIjAc5qAOIcHt5REi88/Ygo=
+github.com/adrg/xdg v0.4.0 h1:RzRqFcjH4nE5C6oTAxhBtoE2IRyjBSa62SCbyPidvls=
+github.com/adrg/xdg v0.4.0/go.mod h1:N6ag73EX4wyxeaoeHctc1mas01KZgsj5tYiAIwqJE/E=
 github.com/alcortesm/tgz v0.0.0-20161220082320-9c5fe88206d7 h1:uSoVVbwJiQipAclBbw+8quDsfcvFjOpI5iCf4p/cqCs=
 github.com/alcortesm/tgz v0.0.0-20161220082320-9c5fe88206d7/go.mod h1:6zEj6s6u/ghQa61ZWa/C2Aw3RkjiTBOix7dkqa1VLIs=
 github.com/anmitsu/go-shlex v0.0.0-20161002113705-648efa622239 h1:kFOfPq6dUM1hTo4JG6LR5AXSUEsOjtdm0kw0FtQtMJA=
@@ -51,6 +51,10 @@ github.com/atotto/clipboard v0.1.4/go.mod h1:ZY9tmq7sm5xIbd9bOK4onWV4S6X0u6GY7Vn
 github.com/aybabtme/humanlog v0.4.1 h1:D8d9um55rrthJsP8IGSHBcti9lTb/XknmDAX6Zy8tek=
 github.com/aybabtme/humanlog v0.4.1/go.mod h1:B0bnQX4FTSU3oftPMTTPvENCy8LqixLDvYJA9TUCAGo=
 github.com/aybabtme/rgbterm v0.0.0-20170906152045-cc83f3b3ce59/go.mod h1:q/89r3U2H7sSsE2t6Kca0lfwTK8JdoNGS/yzM/4iH5I=
+github.com/bahlo/generic-list-go v0.2.0 h1:5sz/EEAK+ls5wF+NeqDpk5+iNdMDXrh3z3nPnH1Wvgk=
+github.com/bahlo/generic-list-go v0.2.0/go.mod h1:2KvAjgMlE5NNynlg/5iLrrCCZ2+5xWbdbCW3pNTGyYg=
+github.com/buger/jsonparser v1.1.1 h1:2PnMjfWD7wBILjqQbt530v576A/cAbQvEW9gGIpYMUs=
+github.com/buger/jsonparser v1.1.1/go.mod h1:6RYKKt7H4d4+iWqouImQ9R2FZql3VbhNgx27UK13J/0=
 github.com/census-instrumentation/opencensus-proto v0.2.1/go.mod h1:f6KPmirojxKA12rnyqOA5BBL4O983OfeGPqjHWSTneU=
 github.com/chzyer/logex v1.1.10/go.mod h1:+Ywpsq7O8HXn0nuIou7OrIPyXbp3wmkHB+jjWRnGsAI=
 github.com/chzyer/readline v0.0.0-20180603132655-2972be24d48e/go.mod h1:nSuG5e5PlCu98SY8svDHJxuZscDgtXS6KTTbou5AhLI=
@@ -80,16 +84,17 @@ github.com/fatih/color v1.7.1-0.20180516100307-2d684516a886/go.mod h1:Zm6kSWBoL9
 github.com/fatih/color v1.9.0 h1:8xPHl4/q1VyqGIPif1F+1V3Y3lSmrq01EabUW3CoW5s=
 github.com/fatih/color v1.9.0/go.mod h1:eQcE1qtQxscV5RaZvpXrrb8Drkc3/DdQ+uUYCNjL+zU=
 github.com/flynn/go-shlex v0.0.0-20150515145356-3f9db97f8568/go.mod h1:xEzjJPgXI435gkrCt3MPfRiAkVrwSbHsst4LCFVfpJc=
-github.com/fsmiamoto/git-todo-parser v0.0.5 h1:Bhzd/vz/6Qm3udfkd6NO9fWfD3TpwR9ucp3N75/J5I8=
-github.com/fsmiamoto/git-todo-parser v0.0.5/go.mod h1:B+AgTbNE2BARvJqzXygThzqxLIaEWvwr2sxKYYb0Fas=
 github.com/fsnotify/fsnotify v1.4.7/go.mod h1:jwhsz4b93w/PPRr/qN1Yymfu8t87LnFCMoQvtojpjFo=
-github.com/gdamore/encoding v1.0.0 h1:+7OoQ1Bc6eTm5niUzBa0Ctsh6JbMW6Ra+YNuAtDBdko=
 github.com/gdamore/encoding v1.0.0/go.mod h1:alR0ol34c49FCSBLjhosxzcPHQbf2trDkoo5dl+VrEg=
+github.com/gdamore/encoding v1.0.1 h1:YzKZckdBL6jVt2Gc+5p82qhrGiqMdG/eNs6Wy0u3Uhw=
+github.com/gdamore/encoding v1.0.1/go.mod h1:0Z0cMFinngz9kS1QfMjCP8TY7em3bZYeeklsSDPivEo=
+github.com/gdamore/tcell/v2 v2.7.4 h1:sg6/UnTM9jGpZU+oFYAsDahfchWAFW8Xx2yFinNSAYU=
+github.com/gdamore/tcell/v2 v2.7.4/go.mod h1:dSXtXTSK0VsW1biw65DZLZ2NKr7j0qP/0J7ONmsraWg=
 github.com/gliderlabs/ssh v0.2.2 h1:6zsha5zo/TWhRhwqCD3+EarCAgZ2yN28ipRnGPnwkI0=
 github.com/gliderlabs/ssh v0.2.2/go.mod h1:U7qILu1NlMHj9FlMhZLlkCdDnU1DBEAqr0aevW3Awn0=
 github.com/go-errors/errors v1.0.2/go.mod h1:psDX2osz5VnTOnFWbDeWwS7yejl+uV3FEWEp4lssFEs=
-github.com/go-errors/errors v1.4.2 h1:J6MZopCL4uSllY1OfXM374weqZFFItUbrImctkmUxIA=
-github.com/go-errors/errors v1.4.2/go.mod h1:sIVyrIiJhuEF+Pj9Ebtd6P/rEYROXFi3BopGUQ5a5Og=
+github.com/go-errors/errors v1.5.1 h1:ZwEMSLRCapFLflTpT7NKaAc7ukJ8ZPEjzlxt8rPN8bk=
+github.com/go-errors/errors v1.5.1/go.mod h1:sIVyrIiJhuEF+Pj9Ebtd6P/rEYROXFi3BopGUQ5a5Og=
 github.com/go-git/gcfg v1.5.0 h1:Q5ViNfGF8zFgyJWPqYwA7qGFoMTEiBmdlkcfRmpIMa4=
 github.com/go-git/gcfg v1.5.0/go.mod h1:5m20vg6GwYabIxaOonVkTdrILxQMpEShl1xiMF4ua+E=
 github.com/go-git/go-billy/v5 v5.0.0 h1:7NQHvd9FVid8VL4qVUMm8XifBK+2xCoZ2lSk0agRrHM=
@@ -173,27 +178,30 @@ github.com/imdario/mergo v0.3.11 h1:3tnifQM4i+fbajXKBHXWEH+KvNHqojZ778UH75j3bGA=
 github.com/imdario/mergo v0.3.11/go.mod h1:jmQim1M+e3UYxmgPu/WyfjB3N3VflVyUjjjwH0dnCYA=
 github.com/integrii/flaggy v1.4.0 h1:A1x7SYx4jqu5NSrY14z8Z+0UyX2S5ygfJJrfolWR3zM=
 github.com/integrii/flaggy v1.4.0/go.mod h1:tnTxHeTJbah0gQ6/K0RW0J7fMUBk9MCF5blhm43LNpI=
+github.com/invopop/jsonschema v0.10.0 h1:c1ktzNLBun3LyQQhyty5WE3lulbOdIIyOVlkmDLehcE=
+github.com/invopop/jsonschema v0.10.0/go.mod h1:ffZ5Km5SWWRAIN6wbDXItl95euhFz2uON45H2qjYt+0=
 github.com/jbenet/go-context v0.0.0-20150711004518-d14ea06fba99 h1:BQSFePA1RWJOlocH6Fxy8MmwDt+yVQYULKfN0RoTN8A=
 github.com/jbenet/go-context v0.0.0-20150711004518-d14ea06fba99/go.mod h1:1lJo3i6rXxKeerYnT8Nvf0QmHCRC1n8sfWVwXF2Frvo=
 github.com/jesseduffield/generics v0.0.0-20220320043834-727e535cbe68 h1:EQP2Tv8TIcC6Y4RI+1ZbJDOHfGJ570tPeYVCqo7/tws=
 github.com/jesseduffield/generics v0.0.0-20220320043834-727e535cbe68/go.mod h1:+LLj9/WUPAP8LqCchs7P+7X0R98HiFujVFANdNaxhGk=
 github.com/jesseduffield/go-git/v5 v5.1.2-0.20221018185014-fdd53fef665d h1:bO+OmbreIv91rCe8NmscRwhFSqkDJtzWCPV4Y+SQuXE=
 github.com/jesseduffield/go-git/v5 v5.1.2-0.20221018185014-fdd53fef665d/go.mod h1:nGNEErzf+NRznT+N2SWqmHnDnF9aLgANB1CUNEan09o=
-github.com/jesseduffield/gocui v0.3.1-0.20230802092815-ae0a5c181634 h1:tL9DS59Po4kw1fR+wFn0zUYQhrgxMskTatLcYQl7MMU=
-github.com/jesseduffield/gocui v0.3.1-0.20230802092815-ae0a5c181634/go.mod h1:pArPLsN1+S6jDrBDukTkpnH89rdhw44wzKdXFICGH3Q=
+github.com/jesseduffield/gocui v0.3.1-0.20240418080333-8cd33929c513 h1:Y1bw5iItrsDCumATc/rklIJ/6K+68ieiWZJedhrNuXo=
+github.com/jesseduffield/gocui v0.3.1-0.20240418080333-8cd33929c513/go.mod h1:XtEbqCbn45keRXEu+OMZkjN5gw6AEob59afsgHjokZ8=
 github.com/jesseduffield/kill v0.0.0-20220618033138-bfbe04675d10 h1:jmpr7KpX2+2GRiE91zTgfq49QvgiqB0nbmlwZ8UnOx0=
 github.com/jesseduffield/kill v0.0.0-20220618033138-bfbe04675d10/go.mod h1:aA97kHeNA+sj2Hbki0pvLslmE4CbDyhBeSSTUUnOuVo=
 github.com/jesseduffield/lazycore v0.0.0-20221012050358-03d2e40243c5 h1:CDuQmfOjAtb1Gms6a1p5L2P8RhbLUq5t8aL7PiQd2uY=
 github.com/jesseduffield/lazycore v0.0.0-20221012050358-03d2e40243c5/go.mod h1:qxN4mHOAyeIDLP7IK7defgPClM/z1Kze8VVQiaEjzsQ=
 github.com/jesseduffield/minimal/gitignore v0.3.3-0.20211018110810-9cde264e6b1e h1:uw/oo+kg7t/oeMs6sqlAwr85ND/9cpO3up3VxphxY0U=
 github.com/jesseduffield/minimal/gitignore v0.3.3-0.20211018110810-9cde264e6b1e/go.mod h1:u60qdFGXRd36jyEXxetz0vQceQIxzI13lIo3EFUDf4I=
-github.com/jesseduffield/yaml v2.1.0+incompatible h1:HWQJ1gIv2zHKbDYNp0Jwjlj24K8aqpFHnMCynY1EpmE=
-github.com/jesseduffield/yaml v2.1.0+incompatible/go.mod h1:w0xGhOSIJCGYYW+hnFPTutCy5aACpkcwbmORt5axGqk=
 github.com/jessevdk/go-flags v1.4.0/go.mod h1:4FA24M0QyGHXBuZZK/XkWh8h0e1EYbRYJSGM75WSRxI=
+github.com/josharian/intern v1.0.0/go.mod h1:5DoeVV0s6jJacbCEi61lwdGj/aVlrQvzHFFd8Hwg//Y=
 github.com/jstemmer/go-junit-report v0.0.0-20190106144839-af01ea7f8024/go.mod h1:6v2b51hI/fHJwM22ozAgKL4VKDeJcHhJFhtBdhmNjmU=
 github.com/jstemmer/go-junit-report v0.9.1/go.mod h1:Brl9GWCQeLvo8nXZwPNNblvFj/XSXhF0NWZEnDohbsk=
 github.com/kardianos/osext v0.0.0-20190222173326-2bc1f35cddc0 h1:iQTw/8FWTuc7uiaSepXwyf3o52HaUYcV+Tu66S3F5GA=
 github.com/kardianos/osext v0.0.0-20190222173326-2bc1f35cddc0/go.mod h1:1NbS8ALrpOvjt0rHPNLyCIeMtbizbir8U//inJ+zuB8=
+github.com/karimkhaleel/jsonschema v0.0.0-20231001195015-d933f0d94ea3 h1:s995u+gNQADMaixtNOs+jilRC/Q78q0UXSI7+4T0cDE=
+github.com/karimkhaleel/jsonschema v0.0.0-20231001195015-d933f0d94ea3/go.mod h1:MCbEh21gjOzxc31udr3u4QM9DAdf8TFJCZz3u5hYIxA=
 github.com/kevinburke/ssh_config v0.0.0-20190725054713-01f96b0aa0cd h1:Coekwdh0v2wtGp9Gmz1Ze3eVRAWJMLokvN3QjdzCHLY=
 github.com/kevinburke/ssh_config v0.0.0-20190725054713-01f96b0aa0cd/go.mod h1:CT57kijsi8u/K/BOFA39wgDQJ9CxiF4nAY/ojJ6r6mM=
 github.com/kisielk/gotool v1.0.0/go.mod h1:XhKaO+MFFWcvkIS/tQcRk01m1F5IRFswLeQ+oQHNcck=
@@ -214,6 +222,8 @@ github.com/kyokomi/emoji/v2 v2.2.8 h1:jcofPxjHWEkJtkIbcLHvZhxKgCPl6C7MyjTrD4KDqU
 github.com/kyokomi/emoji/v2 v2.2.8/go.mod h1:JUcn42DTdsXJo1SWanHh4HKDEyPaR5CqkmoirZZP9qE=
 github.com/lucasb-eyer/go-colorful v1.2.0 h1:1nnpGOrhyZZuNyfu1QjKiUICQ74+3FNCN69Aj6K7nkY=
 github.com/lucasb-eyer/go-colorful v1.2.0/go.mod h1:R4dSotOR9KMtayYi1e77YzuveK+i7ruzyGqttikkLy0=
+github.com/mailru/easyjson v0.7.7 h1:UGYAvKxe3sBsEDzO8ZeWOSlIQfWFlxbzLZe7hwFURr0=
+github.com/mailru/easyjson v0.7.7/go.mod h1:xzfreul335JAWq5oZzymOObrkdz5UnU4kGfJJLY9Nlc=
 github.com/mattn/go-colorable v0.1.0/go.mod h1:9vuHe8Xs5qXnSaW/c/ABM9alt+Vo+STaOChaDxuIBZU=
 github.com/mattn/go-colorable v0.1.4/go.mod h1:U0ppj6V5qS13XJ6of8GYAs25YV2eR4EVcfRqFIhoBtE=
 github.com/mattn/go-colorable v0.1.11 h1:nQ+aFkoE2TMGc0b68U2OKSexC+eq46+XwZzWXHRmPYs=
@@ -223,13 +233,14 @@ github.com/mattn/go-isatty v0.0.8/go.mod h1:Iq45c/XA43vh69/j3iqttzPXn0bhXyGjM0Hd
 github.com/mattn/go-isatty v0.0.11/go.mod h1:PhnuNfih5lzO57/f3n+odYbM4JtupLOxQOAqxQCu2WE=
 github.com/mattn/go-isatty v0.0.14 h1:yVuAays6BHfxijgZPzw+3Zlu5yQgKGP2/hcQbHb7S9Y=
 github.com/mattn/go-isatty v0.0.14/go.mod h1:7GGIvUiUoEMVVmxf/4nioHXj79iQHKdU27kJ6hsGG94=
-github.com/mattn/go-runewidth v0.0.14/go.mod h1:Jdepj2loyihRzMpdS35Xk/zdY8IAYHsh153qUoGf23w=
 github.com/mattn/go-runewidth v0.0.15 h1:UNAjwbU9l54TA3KzvqLGxwWjHmMgBUVhBiTjelZgg3U=
 github.com/mattn/go-runewidth v0.0.15/go.mod h1:Jdepj2loyihRzMpdS35Xk/zdY8IAYHsh153qUoGf23w=
 github.com/mgutz/str v1.2.0 h1:4IzWSdIz9qPQWLfKZ0rJcV0jcUDpxvP4JVZ4GXQyvSw=
 github.com/mgutz/str v1.2.0/go.mod h1:w1v0ofgLaJdoD0HpQ3fycxKD1WtxpjSo151pK/31q6w=
 github.com/mitchellh/go-homedir v1.1.0 h1:lukF9ziXFxDFPkA1vsr5zpc1XuPDn/wFntq5mG+4E0Y=
 github.com/mitchellh/go-homedir v1.1.0/go.mod h1:SfyaCUpYCn1Vlf4IUYiD9fPX4A5wJrkLzIz1N1q0pr0=
+github.com/mitchellh/go-ps v1.0.0 h1:i6ampVEEF4wQFF+bkYfwYgY+F/uYJDktmvLPf7qIgjc=
+github.com/mitchellh/go-ps v1.0.0/go.mod h1:J4lOc8z8yJs6vUwklHw2XEIiT4z4C40KtWVN3nvg8Pg=
 github.com/niemeyer/pretty v0.0.0-20200227124842-a10e7caefd8e h1:fD57ERR4JtEqsWbfPhv4DMiApHyliiK5xCTNVSPiaAs=
 github.com/niemeyer/pretty v0.0.0-20200227124842-a10e7caefd8e/go.mod h1:zD1mROLANZcx1PVRCS0qkT7pwLkGfwJo4zjcN/Tysno=
 github.com/onsi/ginkgo v1.6.0/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE=
@@ -249,8 +260,8 @@ github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZN
 github.com/prometheus/client_model v0.0.0-20190812154241-14fe0d1b01d4/go.mod h1:xMI15A0UPsDsEKsMN9yxemIoYk6Tm2C1GtYGdfGttqA=
 github.com/rivo/uniseg v0.2.0/go.mod h1:J6wj4VEh+S6ZtnVlnTBMWIodfgj8LQOQFoIToxlJtxc=
 github.com/rivo/uniseg v0.4.3/go.mod h1:FN3SvrM+Zdj16jyLfmOkMNblXMcoc8DfTHruCPUcx88=
-github.com/rivo/uniseg v0.4.4 h1:8TfxU8dW6PdqD27gjM8MVNuicgxIjxpm4K7x4jp8sis=
-github.com/rivo/uniseg v0.4.4/go.mod h1:FN3SvrM+Zdj16jyLfmOkMNblXMcoc8DfTHruCPUcx88=
+github.com/rivo/uniseg v0.4.7 h1:WUdvkW8uEhrYfLC4ZzdpI2ztxP1I582+49Oc5Mq64VQ=
+github.com/rivo/uniseg v0.4.7/go.mod h1:FN3SvrM+Zdj16jyLfmOkMNblXMcoc8DfTHruCPUcx88=
 github.com/rogpeppe/go-internal v1.3.0/go.mod h1:M8bDsm7K2OlrFYOpmOWEs/qY81heoFRclV5y23lUDJ4=
 github.com/sahilm/fuzzy v0.1.0 h1:FzWGaw2Opqyu+794ZQ9SYifWv2EIXpwP4q8dY1kDAwI=
 github.com/sahilm/fuzzy v0.1.0/go.mod h1:VFvziUEIMCrT6A6tw2RFIXPXXmzXbOsSHF0DOI8ZK9Y=
@@ -268,12 +279,12 @@ github.com/spf13/afero v1.9.5 h1:stMpOSZFs//0Lv29HduCmli3GUfpFoF3Y1Q/aXj/wVM=
 github.com/spf13/afero v1.9.5/go.mod h1:UBogFpq8E9Hx+xc5CNTTEpTnuHVmXDwZcZcE1eb/UhQ=
 github.com/spkg/bom v0.0.0-20160624110644-59b7046e48ad h1:fiWzISvDn0Csy5H0iwgAuJGQTUpVfEMJJd4nRFXogbc=
 github.com/spkg/bom v0.0.0-20160624110644-59b7046e48ad/go.mod h1:qLr4V1qq6nMqFKkMo8ZTx3f+BZEkzsRUY10Xsm2mwU0=
-github.com/stefanhaller/tcell/v2 v2.6.1 h1:Qo4k5SOUc09q9xyA8juH4jFJy+neM9aQwJHgVO2/zBM=
-github.com/stefanhaller/tcell/v2 v2.6.1/go.mod h1:PuJ7T6QKbsU7iVOHlhRoV3D/ipIAJsyiV4dbwcVaYj8=
+github.com/stefanhaller/git-todo-parser v0.0.7-0.20240406123903-fd957137b6e2 h1:RTNWemd/9z9A5L/AggEP3OdhRz5dXETB/wdAlYF0SuM=
+github.com/stefanhaller/git-todo-parser v0.0.7-0.20240406123903-fd957137b6e2/go.mod h1:HFt9hGqMzgQ+gVxMKcvTvGaFz4Y0yYycqqAp2V3wcJY=
 github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
 github.com/stretchr/objx v0.1.1/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
-github.com/stretchr/objx v0.4.0 h1:M2gUjqZET1qApGOWNSnZ49BAIMX4F/1plDv3+l31EJ4=
 github.com/stretchr/objx v0.4.0/go.mod h1:YvHI0jy2hoMjB+UWwv71VJQ9isScKT/TqJzVSSt89Yw=
+github.com/stretchr/objx v0.5.0/go.mod h1:Yh+to48EsGEfYuaHDzXPcE3xhTkx73EhmCGUpEOglKo=
 github.com/stretchr/testify v0.0.0-20161117074351-18a02ba4a312/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs=
 github.com/stretchr/testify v1.2.2/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs=
 github.com/stretchr/testify v1.4.0/go.mod h1:j7eGeouHqKxXV5pUuKE4zz7dFj8WfuZ+81PSLYec5m4=
@@ -281,10 +292,14 @@ github.com/stretchr/testify v1.5.1/go.mod h1:5W2xD1RspED5o8YsWQXVCued0rvSQ+mT+I5
 github.com/stretchr/testify v1.6.1/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
 github.com/stretchr/testify v1.7.0/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
 github.com/stretchr/testify v1.7.1/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
-github.com/stretchr/testify v1.8.0 h1:pSgiaMZlXftHpm5L7V1+rVB+AZJydKsMxsQBIJw4PKk=
 github.com/stretchr/testify v1.8.0/go.mod h1:yNjHg4UonilssWZ8iaSj1OCr/vHnekPRkoO+kdMU+MU=
+github.com/stretchr/testify v1.8.1 h1:w7B6lhMri9wdJUVmEZPGGhZzrYTPvgJArz7wNPgYKsk=
+github.com/stretchr/testify v1.8.1/go.mod h1:w2LPCIKwWwSfY2zedu0+kehJoqGctiVI29o6fzry7u4=
 github.com/thoas/go-funk v0.9.1 h1:O549iLZqPpTUQ10ykd26sZhzD+rmR5pWhuElrhbC20M=
+github.com/thoas/go-funk v0.9.1/go.mod h1:+IWnUfUmFO1+WVYQWQtIJHeRRdaIyyYglZN7xzUPe4Q=
 github.com/urfave/cli v1.20.1-0.20180226030253-8e01ec4cd3e2/go.mod h1:70zkFmudgCuE/ngEzBv17Jvp/497gISqfk5gWijbERA=
+github.com/wk8/go-ordered-map/v2 v2.1.8 h1:5h/BUHu93oj4gIdvHHHGsScSTMijfx5PeYkE/fJgbpc=
+github.com/wk8/go-ordered-map/v2 v2.1.8/go.mod h1:5nJHM5DyteebpVlHnWMV0rPz6Zp7+xBAnxjb1X5vnTw=
 github.com/xanzy/ssh-agent v0.2.1 h1:TCbipTQL2JiiCprBWx9frJ2eJlCYT00NmctrHxVAr70=
 github.com/xanzy/ssh-agent v0.2.1/go.mod h1:mLlQY/MoOhWBj+gOGMQkOeiEvkx+8pJSI+0Bx9h2kr4=
 github.com/xo/terminfo v0.0.0-20210125001918-ca9a967f8778 h1:QldyIu/L63oPpyvQmHgvgickp1Yw510KJOqX7H24mg8=
@@ -347,6 +362,7 @@ golang.org/x/mod v0.3.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
 golang.org/x/mod v0.4.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
 golang.org/x/mod v0.4.1/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
 golang.org/x/mod v0.6.0-dev.0.20220419223038-86c51ed26bb4/go.mod h1:jJ57K6gSWd91VN4djpZkiMVwK6gcyfeH4XE8wZrZaV4=
+golang.org/x/mod v0.8.0/go.mod h1:iBbtSCu2XBx23ZKBPSOrRkjjQPZFPuis4dIYUhu/chs=
 golang.org/x/net v0.0.0-20180724234803-3673e40ba225/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
 golang.org/x/net v0.0.0-20180826012351-8a410e7b638d/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
 golang.org/x/net v0.0.0-20180906233101-161cd47e91fd/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
@@ -381,6 +397,7 @@ golang.org/x/net v0.0.0-20201224014010-6772e930b67b/go.mod h1:m0MpNAwzfU5UDzcl9v
 golang.org/x/net v0.0.0-20210226172049-e18ecbb05110/go.mod h1:m0MpNAwzfU5UDzcl9v0D8zg8gWTRqZa9RBIspLL5mdg=
 golang.org/x/net v0.0.0-20211112202133-69e39bad7dc2/go.mod h1:9nx3DQGgdP8bBQD5qxJ1jj9UTztislL4KSBs9R2vV5Y=
 golang.org/x/net v0.0.0-20220722155237-a158d28d115b/go.mod h1:XRhObCWvk6IyKnWLug+ECip1KBveYUHfp+8e9klMJ9c=
+golang.org/x/net v0.6.0/go.mod h1:2Tu9+aMcznHK/AK1HMvgo6xiTLG5rD5rZLDS+rp2Bjs=
 golang.org/x/net v0.7.0 h1:rJrUqqhjsgNp7KqAIc25s9pZnjU7TUcSY7HcVZjdn1g=
 golang.org/x/net v0.7.0/go.mod h1:2Tu9+aMcznHK/AK1HMvgo6xiTLG5rD5rZLDS+rp2Bjs=
 golang.org/x/oauth2 v0.0.0-20180821212333-d2e6202438be/go.mod h1:N/0e6XlmueqKjAGxoOufVs8QHGRruUQn6yWY3a++T0U=
@@ -403,6 +420,7 @@ golang.org/x/sync v0.0.0-20200625203802-6e8e738ad208/go.mod h1:RxMgew5VJxzue5/jJ
 golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sync v0.0.0-20201207232520-09787c993a3a/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sync v0.0.0-20220722155255-886fb9371eb4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sync v0.1.0/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sys v0.0.0-20170407050850-f3918c30c5c2/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20180830151530-49385e6e1522/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20180909124046-d0be0721c37e/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
@@ -447,17 +465,19 @@ golang.org/x/sys v0.0.0-20210423185535-09eb48e85fd7/go.mod h1:h1NjWce9XRLGQEsW7w
 golang.org/x/sys v0.0.0-20210615035016-665e8c7367d1/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20210630005230-0f9fa26af87c/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20210927094055-39ccf1dd6fa6/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.0.0-20211025201205-69cdffdb9359/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20220520151302-bc2c85ada10a/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20220722155257-8c9f86f7a55f/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.5.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.8.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.10.0 h1:SqMFp9UcQJZa+pmYuAKjd9xq1f0j5rLcDIk0mj4qAsA=
-golang.org/x/sys v0.10.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.17.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
+golang.org/x/sys v0.19.0 h1:q5f1RH2jigJ1MoAWp2KTp3gm5zAGFUTarQZ5U386+4o=
+golang.org/x/sys v0.19.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
 golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
 golang.org/x/term v0.0.0-20210927222741-03fcf44c2211/go.mod h1:jbD1KX2456YbFQfuXm/mYQcufACuNUgVhRMnK/tPxf8=
 golang.org/x/term v0.5.0/go.mod h1:jMB1sMXY+tzblOD4FWmEbocvup2/aLOaQEp7JmGp78k=
-golang.org/x/term v0.10.0 h1:3R7pNqamzBraeqj/Tj8qt1aQ2HpmlC+Cx/qL/7hn4/c=
-golang.org/x/term v0.10.0/go.mod h1:lpqdcUyK/oCiQxvxVrppt5ggO2KCZ5QblwqPnfZ6d5o=
+golang.org/x/term v0.17.0/go.mod h1:lLRBjIVuehSbZlaOtGMbcMncT+aqLLLmKrsjNrUguwk=
+golang.org/x/term v0.19.0 h1:+ThwsDv+tYfnJFhF4L8jITxu1tdTWRTZpdsWgEgjL6Q=
+golang.org/x/term v0.19.0/go.mod h1:2CuTdWZ7KHSQwUzKva0cbMg6q2DMI3Mmxp+gKJbskEk=
 golang.org/x/text v0.0.0-20170915032832-14c0d48ead0c/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.1-0.20180807135948-17ff2d5776d2/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
@@ -467,8 +487,8 @@ golang.org/x/text v0.3.4/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
 golang.org/x/text v0.3.6/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
 golang.org/x/text v0.3.7/go.mod h1:u+2+/6zg+i71rQMx5EYifcz6MCKuco9NR6JIITiCfzQ=
 golang.org/x/text v0.7.0/go.mod h1:mrYo+phRRbMaCq/xk9113O4dZlRixOauAjOtrjsXDZ8=
-golang.org/x/text v0.11.0 h1:LAntKIrcmeSKERyiOh0XMV39LXS8IE9UL2yP7+f5ij4=
-golang.org/x/text v0.11.0/go.mod h1:TvPlkZtksWOMsz7fbANvkp4WM8x/WCo/om8BMLbz+aE=
+golang.org/x/text v0.14.0 h1:ScX5w1eTa3QqT8oi6+ziP7dTV1S2+ALU0bI+0zXKWiQ=
+golang.org/x/text v0.14.0/go.mod h1:18ZOQIKpY8NJVqYksKHtTdi31H5itFRjB5/qKTNYzSU=
 golang.org/x/time v0.0.0-20181108054448-85acf8d2951c/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
 golang.org/x/time v0.0.0-20190308202827-9d24e82272b4/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
 golang.org/x/time v0.0.0-20191024005414-555d28b269f0/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
@@ -520,6 +540,7 @@ golang.org/x/tools v0.0.0-20210105154028-b0ab187a4818/go.mod h1:emZCQorbCU4vsT4f
 golang.org/x/tools v0.0.0-20210108195828-e2f9c7f1fc8e/go.mod h1:emZCQorbCU4vsT4fOWvOPXz4eW1wZW4PmDk9uLelYpA=
 golang.org/x/tools v0.1.0/go.mod h1:xkSsbof2nBLbhDlRMhhhyNLN/zl3eTqcnHD5viDpcZ0=
 golang.org/x/tools v0.1.12/go.mod h1:hNGJHUnrk76NpqgfD5Aqm5Crs+Hm0VOH/i9J2+nxYbc=
+golang.org/x/tools v0.6.0/go.mod h1:Xwgl3UAJ/d3gWutnCtw505GrjyAbvKui8lOU390QaIU=
 golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 golang.org/x/xerrors v0.0.0-20191011141410-1b5146add898/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=

pkg/app/app.go

@@ -23,6 +23,7 @@ import (
 	"github.com/jesseduffield/lazygit/pkg/env"
 	"github.com/jesseduffield/lazygit/pkg/gui"
 	"github.com/jesseduffield/lazygit/pkg/i18n"
+	integrationTypes "github.com/jesseduffield/lazygit/pkg/integration/types"
 	"github.com/jesseduffield/lazygit/pkg/logs"
 	"github.com/jesseduffield/lazygit/pkg/updates"
 )
@@ -42,7 +43,7 @@ func Run(
 	common *common.Common,
 	startArgs appTypes.StartArgs,
 ) {
-	app, err := NewApp(config, common)
+	app, err := NewApp(config, startArgs.IntegrationTest, common)
 
 	if err == nil {
 		err = app.Run(startArgs)
@@ -62,6 +63,7 @@ func Run(
 
 func NewCommon(config config.AppConfigurer) (*common.Common, error) {
 	userConfig := config.GetUserConfig()
+	appState := config.GetAppState()
 
 	var err error
 	log := newLogger(config)
@@ -74,6 +76,7 @@ func NewCommon(config config.AppConfigurer) (*common.Common, error) {
 		Log:        log,
 		Tr:         tr,
 		UserConfig: userConfig,
+		AppState:   appState,
 		Debug:      config.GetDebug(),
 		Fs:         afero.NewOsFs(),
 	}, nil
@@ -92,7 +95,7 @@ func newLogger(cfg config.AppConfigurer) *logrus.Entry {
 }
 
 // NewApp bootstrap a new application
-func NewApp(config config.AppConfigurer, common *common.Common) (*App, error) {
+func NewApp(config config.AppConfigurer, test integrationTypes.IntegrationTest, common *common.Common) (*App, error) {
 	app := &App{
 		closers: []io.Closer{},
 		Config:  config,
@@ -126,7 +129,7 @@ func NewApp(config config.AppConfigurer, common *common.Common) (*App, error) {
 		showRecentRepos = true
 	}
 
-	app.Gui, err = gui.NewGui(common, config, gitVersion, updater, showRecentRepos, dirName)
+	app.Gui, err = gui.NewGui(common, config, gitVersion, updater, showRecentRepos, dirName, test)
 	if err != nil {
 		return app, err
 	}

pkg/app/daemon/daemon.go

@@ -8,11 +8,11 @@ import (
 	"os/exec"
 	"strconv"
 
-	"github.com/fsmiamoto/git-todo-parser/todo"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
 	"github.com/jesseduffield/lazygit/pkg/common"
 	"github.com/jesseduffield/lazygit/pkg/utils"
 	"github.com/samber/lo"
+	"github.com/stefanhaller/git-todo-parser/todo"
 )
 
 // Sometimes lazygit will be invoked in daemon mode from a parent lazygit process.
@@ -33,12 +33,14 @@ const (
 	DaemonKindUnknown DaemonKind = iota
 
 	DaemonKindExitImmediately
+	DaemonKindRemoveUpdateRefsForCopiedBranch
 	DaemonKindCherryPick
-	DaemonKindMoveTodoUp
-	DaemonKindMoveTodoDown
+	DaemonKindMoveTodosUp
+	DaemonKindMoveTodosDown
 	DaemonKindInsertBreak
 	DaemonKindChangeTodoActions
 	DaemonKindMoveFixupCommitDown
+	DaemonKindWriteRebaseTodo
 )
 
 const (
@@ -52,13 +54,15 @@ func getInstruction() Instruction {
 	jsonData := os.Getenv(DaemonInstructionEnvKey)
 
 	mapping := map[DaemonKind]func(string) Instruction{
-		DaemonKindExitImmediately:     deserializeInstruction[*ExitImmediatelyInstruction],
-		DaemonKindCherryPick:          deserializeInstruction[*CherryPickCommitsInstruction],
-		DaemonKindChangeTodoActions:   deserializeInstruction[*ChangeTodoActionsInstruction],
-		DaemonKindMoveFixupCommitDown: deserializeInstruction[*MoveFixupCommitDownInstruction],
-		DaemonKindMoveTodoUp:          deserializeInstruction[*MoveTodoUpInstruction],
-		DaemonKindMoveTodoDown:        deserializeInstruction[*MoveTodoDownInstruction],
-		DaemonKindInsertBreak:         deserializeInstruction[*InsertBreakInstruction],
+		DaemonKindExitImmediately:                 deserializeInstruction[*ExitImmediatelyInstruction],
+		DaemonKindRemoveUpdateRefsForCopiedBranch: deserializeInstruction[*RemoveUpdateRefsForCopiedBranchInstruction],
+		DaemonKindCherryPick:                      deserializeInstruction[*CherryPickCommitsInstruction],
+		DaemonKindChangeTodoActions:               deserializeInstruction[*ChangeTodoActionsInstruction],
+		DaemonKindMoveFixupCommitDown:             deserializeInstruction[*MoveFixupCommitDownInstruction],
+		DaemonKindMoveTodosUp:                     deserializeInstruction[*MoveTodosUpInstruction],
+		DaemonKindMoveTodosDown:                   deserializeInstruction[*MoveTodosDownInstruction],
+		DaemonKindInsertBreak:                     deserializeInstruction[*InsertBreakInstruction],
+		DaemonKindWriteRebaseTodo:                 deserializeInstruction[*WriteRebaseTodoInstruction],
 	}
 
 	return mapping[getDaemonKind()](jsonData)
@@ -155,6 +159,26 @@ func NewExitImmediatelyInstruction() Instruction {
 	return &ExitImmediatelyInstruction{}
 }
 
+type RemoveUpdateRefsForCopiedBranchInstruction struct{}
+
+func (self *RemoveUpdateRefsForCopiedBranchInstruction) Kind() DaemonKind {
+	return DaemonKindRemoveUpdateRefsForCopiedBranch
+}
+
+func (self *RemoveUpdateRefsForCopiedBranchInstruction) SerializedInstructions() string {
+	return serializeInstruction(self)
+}
+
+func (self *RemoveUpdateRefsForCopiedBranchInstruction) run(common *common.Common) error {
+	return handleInteractiveRebase(common, func(path string) error {
+		return nil
+	})
+}
+
+func NewRemoveUpdateRefsForCopiedBranchInstruction() Instruction {
+	return &RemoveUpdateRefsForCopiedBranchInstruction{}
+}
+
 type CherryPickCommitsInstruction struct {
 	Todo string
 }
@@ -208,28 +232,30 @@ func (self *ChangeTodoActionsInstruction) SerializedInstructions() string {
 
 func (self *ChangeTodoActionsInstruction) run(common *common.Common) error {
 	return handleInteractiveRebase(common, func(path string) error {
-		for _, c := range self.Changes {
-			if err := utils.EditRebaseTodo(path, c.Sha, todo.Pick, c.NewAction, getCommentChar()); err != nil {
-				return err
+		changes := lo.Map(self.Changes, func(c ChangeTodoAction, _ int) utils.TodoChange {
+			return utils.TodoChange{
+				Hash:      c.Hash,
+				OldAction: todo.Pick,
+				NewAction: c.NewAction,
 			}
-		}
+		})
 
-		return nil
+		return utils.EditRebaseTodo(path, changes, getCommentChar())
 	})
 }
 
-// Takes the sha of some commit, and the sha of a fixup commit that was created
+// Takes the hash of some commit, and the hash of a fixup commit that was created
 // at the end of the branch, then moves the fixup commit down to right after the
 // original commit, changing its type to "fixup"
 type MoveFixupCommitDownInstruction struct {
-	OriginalSha string
-	FixupSha    string
+	OriginalHash string
+	FixupHash    string
 }
 
-func NewMoveFixupCommitDownInstruction(originalSha string, fixupSha string) Instruction {
+func NewMoveFixupCommitDownInstruction(originalHash string, fixupHash string) Instruction {
 	return &MoveFixupCommitDownInstruction{
-		OriginalSha: originalSha,
-		FixupSha:    fixupSha,
+		OriginalHash: originalHash,
+		FixupHash:    fixupHash,
 	}
 }
 
@@ -243,55 +269,69 @@ func (self *MoveFixupCommitDownInstruction) SerializedInstructions() string {
 
 func (self *MoveFixupCommitDownInstruction) run(common *common.Common) error {
 	return handleInteractiveRebase(common, func(path string) error {
-		return utils.MoveFixupCommitDown(path, self.OriginalSha, self.FixupSha, getCommentChar())
+		return utils.MoveFixupCommitDown(path, self.OriginalHash, self.FixupHash, getCommentChar())
 	})
 }
 
-type MoveTodoUpInstruction struct {
-	Sha string
+type MoveTodosUpInstruction struct {
+	Hashes []string
 }
 
-func NewMoveTodoUpInstruction(sha string) Instruction {
-	return &MoveTodoUpInstruction{
-		Sha: sha,
+func NewMoveTodosUpInstruction(hashes []string) Instruction {
+	return &MoveTodosUpInstruction{
+		Hashes: hashes,
 	}
 }
 
-func (self *MoveTodoUpInstruction) Kind() DaemonKind {
-	return DaemonKindMoveTodoUp
+func (self *MoveTodosUpInstruction) Kind() DaemonKind {
+	return DaemonKindMoveTodosUp
 }
 
-func (self *MoveTodoUpInstruction) SerializedInstructions() string {
+func (self *MoveTodosUpInstruction) SerializedInstructions() string {
 	return serializeInstruction(self)
 }
 
-func (self *MoveTodoUpInstruction) run(common *common.Common) error {
+func (self *MoveTodosUpInstruction) run(common *common.Common) error {
+	todosToMove := lo.Map(self.Hashes, func(hash string, _ int) utils.Todo {
+		return utils.Todo{
+			Hash:   hash,
+			Action: todo.Pick,
+		}
+	})
+
 	return handleInteractiveRebase(common, func(path string) error {
-		return utils.MoveTodoUp(path, self.Sha, todo.Pick, getCommentChar())
+		return utils.MoveTodosUp(path, todosToMove, getCommentChar())
 	})
 }
 
-type MoveTodoDownInstruction struct {
-	Sha string
+type MoveTodosDownInstruction struct {
+	Hashes []string
 }
 
-func NewMoveTodoDownInstruction(sha string) Instruction {
-	return &MoveTodoDownInstruction{
-		Sha: sha,
+func NewMoveTodosDownInstruction(hashes []string) Instruction {
+	return &MoveTodosDownInstruction{
+		Hashes: hashes,
 	}
 }
 
-func (self *MoveTodoDownInstruction) Kind() DaemonKind {
-	return DaemonKindMoveTodoDown
+func (self *MoveTodosDownInstruction) Kind() DaemonKind {
+	return DaemonKindMoveTodosDown
 }
 
-func (self *MoveTodoDownInstruction) SerializedInstructions() string {
+func (self *MoveTodosDownInstruction) SerializedInstructions() string {
 	return serializeInstruction(self)
 }
 
-func (self *MoveTodoDownInstruction) run(common *common.Common) error {
+func (self *MoveTodosDownInstruction) run(common *common.Common) error {
+	todosToMove := lo.Map(self.Hashes, func(hash string, _ int) utils.Todo {
+		return utils.Todo{
+			Hash:   hash,
+			Action: todo.Pick,
+		}
+	})
+
 	return handleInteractiveRebase(common, func(path string) error {
-		return utils.MoveTodoDown(path, self.Sha, todo.Pick, getCommentChar())
+		return utils.MoveTodosDown(path, todosToMove, getCommentChar())
 	})
 }
 
@@ -314,3 +354,27 @@ func (self *InsertBreakInstruction) run(common *common.Common) error {
 		return utils.PrependStrToTodoFile(path, []byte("break\n"))
 	})
 }
+
+type WriteRebaseTodoInstruction struct {
+	TodosFileContent []byte
+}
+
+func NewWriteRebaseTodoInstruction(todosFileContent []byte) Instruction {
+	return &WriteRebaseTodoInstruction{
+		TodosFileContent: todosFileContent,
+	}
+}
+
+func (self *WriteRebaseTodoInstruction) Kind() DaemonKind {
+	return DaemonKindWriteRebaseTodo
+}
+
+func (self *WriteRebaseTodoInstruction) SerializedInstructions() string {
+	return serializeInstruction(self)
+}
+
+func (self *WriteRebaseTodoInstruction) run(common *common.Common) error {
+	return handleInteractiveRebase(common, func(path string) error {
+		return os.WriteFile(path, self.TodosFileContent, 0o644)
+	})
+}

pkg/app/daemon/rebase.go

@@ -5,11 +5,12 @@ import (
 	"path/filepath"
 	"strings"
 
-	"github.com/fsmiamoto/git-todo-parser/todo"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
 	"github.com/jesseduffield/lazygit/pkg/common"
 	"github.com/jesseduffield/lazygit/pkg/env"
+	"github.com/jesseduffield/lazygit/pkg/utils"
 	"github.com/samber/lo"
+	"github.com/stefanhaller/git-todo-parser/todo"
 )
 
 type TodoLine struct {
@@ -21,7 +22,7 @@ func (self *TodoLine) ToString() string {
 	if self.Action == "break" {
 		return self.Action + "\n"
 	} else {
-		return self.Action + " " + self.Commit.Sha + " " + self.Commit.Name + "\n"
+		return self.Action + " " + self.Commit.Hash + " " + self.Commit.Name + "\n"
 	}
 }
 
@@ -34,7 +35,7 @@ func TodoLinesToString(todoLines []TodoLine) string {
 }
 
 type ChangeTodoAction struct {
-	Sha       string
+	Hash      string
 	NewAction todo.TodoCommand
 }
 
@@ -44,6 +45,10 @@ func handleInteractiveRebase(common *common.Common, f func(path string) error) e
 	path := os.Args[1]
 
 	if strings.HasSuffix(path, "git-rebase-todo") {
+		err := utils.RemoveUpdateRefsForCopiedBranch(path, getCommentChar())
+		if err != nil {
+			return err
+		}
 		return f(path)
 	} else if strings.HasSuffix(path, filepath.Join(gitDir(), "COMMIT_EDITMSG")) { // TODO: test
 		// if we are rebasing and squashing, we'll see a COMMIT_EDITMSG

pkg/app/entry_point.go

@@ -63,8 +63,17 @@ func Start(buildInfo *BuildInfo, integrationTest integrationTypes.IntegrationTes
 			log.Fatal(absRepoPath + " is not a valid git repository.")
 		}
 
-		cliArgs.WorkTree = absRepoPath
 		cliArgs.GitDir = filepath.Join(absRepoPath, ".git")
+		err = os.Chdir(absRepoPath)
+		if err != nil {
+			log.Fatalf("Failed to change directory to %s: %v", absRepoPath, err)
+		}
+	} else if cliArgs.WorkTree != "" {
+		env.SetWorkTreeEnv(cliArgs.WorkTree)
+
+		if err := os.Chdir(cliArgs.WorkTree); err != nil {
+			log.Fatalf("Failed to change directory to %s: %v", cliArgs.WorkTree, err)
+		}
 	}
 
 	if cliArgs.CustomConfigFile != "" {
@@ -75,13 +84,6 @@ func Start(buildInfo *BuildInfo, integrationTest integrationTypes.IntegrationTes
 		os.Setenv("CONFIG_DIR", cliArgs.UseConfigDir)
 	}
 
-	if cliArgs.WorkTree != "" {
-		err := os.Chdir(cliArgs.WorkTree)
-		if err != nil {
-			log.Fatalf("Failed to change directory to %s: %v", cliArgs.WorkTree, err)
-		}
-	}
-
 	if cliArgs.GitDir != "" {
 		env.SetGitDirEnv(cliArgs.GitDir)
 	}
@@ -118,12 +120,6 @@ func Start(buildInfo *BuildInfo, integrationTest integrationTypes.IntegrationTes
 		os.Exit(0)
 	}
 
-	if cliArgs.WorkTree != "" {
-		if err := os.Chdir(cliArgs.WorkTree); err != nil {
-			log.Fatal(err.Error())
-		}
-	}
-
 	tempDir, err := os.MkdirTemp("", "lazygit-*")
 	if err != nil {
 		log.Fatal(err.Error())
@@ -184,10 +180,10 @@ func parseCliArgsAndEnvVars() *cliArgs {
 	useConfigDir := ""
 	flaggy.String(&useConfigDir, "ucd", "use-config-dir", "override default config directory with provided directory")
 
-	workTree := ""
+	workTree := os.Getenv("GIT_WORK_TREE")
 	flaggy.String(&workTree, "w", "work-tree", "equivalent of the --work-tree git argument")
 
-	gitDir := ""
+	gitDir := os.Getenv("GIT_DIR")
 	flaggy.String(&gitDir, "g", "git-dir", "equivalent of the --git-dir git argument")
 
 	customConfigFile := ""
@@ -267,7 +263,7 @@ func mergeBuildInfo(buildInfo *BuildInfo) {
 		buildInfo.Commit = revision.Value
 		// if lazygit was built from source we'll show the version as the
 		// abbreviated commit hash
-		buildInfo.Version = utils.ShortSha(revision.Value)
+		buildInfo.Version = utils.ShortHash(revision.Value)
 	}
 
 	// if version hasn't been set we assume that neither has the date

pkg/app/errors.go

@@ -27,6 +27,10 @@ func knownError(tr *i18n.TranslationSet, err error) (string, bool) {
 			originalError: "fatal: not a git repository",
 			newError:      tr.NotARepository,
 		},
+		{
+			originalError: "getwd: no such file or directory",
+			newError:      tr.WorkingDirectoryDoesNotExist,
+		},
 	}
 
 	if mapping, ok := lo.Find(mappings, func(mapping errorMapping) bool {

pkg/cheatsheet/check.go

@@ -1,77 +0,0 @@
-package cheatsheet
-
-import (
-	"fmt"
-	"io/fs"
-	"log"
-	"os"
-	"path/filepath"
-	"regexp"
-
-	"github.com/pmezard/go-difflib/difflib"
-)
-
-func Check() {
-	dir := GetKeybindingsDir()
-	tmpDir := filepath.Join(os.TempDir(), "lazygit_cheatsheet")
-	err := os.RemoveAll(tmpDir)
-	if err != nil {
-		log.Fatalf("Error occurred while checking if cheatsheets are up to date: %v", err)
-	}
-	err = os.Mkdir(tmpDir, 0o700)
-	if err != nil {
-		log.Fatalf("Error occurred while checking if cheatsheets are up to date: %v", err)
-	}
-
-	generateAtDir(tmpDir)
-	defer os.RemoveAll(tmpDir)
-
-	actualContent := obtainContent(dir)
-	expectedContent := obtainContent(tmpDir)
-
-	if expectedContent == "" {
-		log.Fatal("empty expected content")
-	}
-
-	if actualContent != expectedContent {
-		err := difflib.WriteUnifiedDiff(os.Stdout, difflib.UnifiedDiff{
-			A:        difflib.SplitLines(expectedContent),
-			B:        difflib.SplitLines(actualContent),
-			FromFile: "Expected",
-			FromDate: "",
-			ToFile:   "Actual",
-			ToDate:   "",
-			Context:  1,
-		})
-		if err != nil {
-			log.Fatalf("Error occurred while checking if cheatsheets are up to date: %v", err)
-		}
-		fmt.Printf("\nCheatsheets are out of date. Please run `%s` at the project root and commit the changes. If you run the script and no keybindings files are updated as a result, try rebasing onto master and trying again.\n", CommandToRun())
-		os.Exit(1)
-	}
-
-	fmt.Println("\nCheatsheets are up to date")
-}
-
-func obtainContent(dir string) string {
-	re := regexp.MustCompile(`Keybindings_\w+\.md$`)
-
-	content := ""
-	err := filepath.WalkDir(dir, func(path string, d fs.DirEntry, err error) error {
-		if re.MatchString(path) {
-			bytes, err := os.ReadFile(path)
-			if err != nil {
-				log.Fatalf("Error occurred while checking if cheatsheets are up to date: %v", err)
-			}
-			content += fmt.Sprintf("\n%s\n\n", filepath.Base(path))
-			content += string(bytes)
-		}
-
-		return nil
-	})
-	if err != nil {
-		log.Fatalf("Error occurred while checking if cheatsheets are up to date: %v", err)
-	}
-
-	return content
-}

pkg/cheatsheet/generate.go

@@ -1,10 +1,12 @@
-// This "script" generates a file called Keybindings_{{.LANG}}.md
-// in current working directory.
+//go:generate go run generator.go
+
+// This "script" generates files called Keybindings_{{.LANG}}.md
+// in the docs/keybindings directory.
 //
-// The content of this generated file is a keybindings cheatsheet.
+// The content of these generated files is a keybindings cheatsheet.
 //
-// To generate cheatsheet in english run:
-//   go run scripts/generate_cheatsheet.go
+// To generate the cheatsheets, run:
+//   go generate pkg/cheatsheet/generate.go
 
 package cheatsheet
 
@@ -12,7 +14,6 @@ import (
 	"fmt"
 	"log"
 	"os"
-	"strings"
 
 	"github.com/jesseduffield/generics/maps"
 	"github.com/jesseduffield/lazycore/pkg/utils"
@@ -42,7 +43,7 @@ type headerWithBindings struct {
 }
 
 func CommandToRun() string {
-	return "go run scripts/cheatsheet/main.go generate"
+	return "go generate ./..."
 }
 
 func GetKeybindingsDir() string {
@@ -59,7 +60,7 @@ func generateAtDir(cheatsheetDir string) {
 		if err != nil {
 			log.Fatal(err)
 		}
-		mApp, _ := app.NewApp(mConfig, common)
+		mApp, _ := app.NewApp(mConfig, nil, common)
 		path := cheatsheetDir + "/Keybindings_" + lang + ".md"
 		file, err := os.Create(path)
 		if err != nil {
@@ -189,11 +190,11 @@ func formatSections(tr *i18n.TranslationSet, bindingSections []*bindingSection)
 
 	for _, section := range bindingSections {
 		content += formatTitle(section.title)
-		content += "<pre>\n"
+		content += "| Key | Action | Info |\n"
+		content += "|-----|--------|-------------|\n"
 		for _, binding := range section.bindings {
 			content += formatBinding(binding)
 		}
-		content += "</pre>\n"
 	}
 
 	return content
@@ -204,19 +205,15 @@ func formatTitle(title string) string {
 }
 
 func formatBinding(binding *types.Binding) string {
-	result := fmt.Sprintf("  <kbd>%s</kbd>: %s", escapeAngleBrackets(keybindings.LabelFromKey(binding.Key)), binding.Description)
+	action := keybindings.LabelFromKey(binding.Key)
+	description := binding.Description
 	if binding.Alternative != "" {
-		result += fmt.Sprintf(" (%s)", binding.Alternative)
+		action += fmt.Sprintf(" (%s)", binding.Alternative)
 	}
-	result += "\n"
 
-	return result
-}
-
-func escapeAngleBrackets(str string) string {
-	result := strings.ReplaceAll(str, ">", "&gt;")
-	result = strings.ReplaceAll(result, "<", "&lt;")
-	return result
+	// Use backticks for keyboard keys. Two backticks are needed with an inner space
+	//  to escape a key that is itself a backtick.
+	return fmt.Sprintf("| `` %s `` | %s | %s |\n", action, description, binding.Tooltip)
 }
 
 func italicize(str string) string {

pkg/cheatsheet/generator.go

@@ -0,0 +1,14 @@
+//go:build ignore
+
+package main
+
+import (
+	"fmt"
+
+	"github.com/jesseduffield/lazygit/pkg/cheatsheet"
+)
+
+func main() {
+	fmt.Printf("Generating cheatsheets in %s...\n", cheatsheet.GetKeybindingsDir())
+	cheatsheet.Generate()
+}

pkg/commands/git.go

@@ -2,13 +2,9 @@ package commands
 
 import (
 	"os"
-	"path"
-	"path/filepath"
 	"strings"
 
 	"github.com/go-errors/errors"
-	"github.com/sasha-s/go-deadlock"
-	"github.com/spf13/afero"
 
 	gogit "github.com/jesseduffield/go-git/v5"
 	"github.com/jesseduffield/lazygit/pkg/commands/git_commands"
@@ -16,12 +12,12 @@ import (
 	"github.com/jesseduffield/lazygit/pkg/commands/oscommands"
 	"github.com/jesseduffield/lazygit/pkg/commands/patch"
 	"github.com/jesseduffield/lazygit/pkg/common"
-	"github.com/jesseduffield/lazygit/pkg/env"
 	"github.com/jesseduffield/lazygit/pkg/utils"
 )
 
 // GitCommand is our main git interface
 type GitCommand struct {
+	Blame       *git_commands.BlameCommands
 	Branch      *git_commands.BranchCommands
 	Commit      *git_commands.CommitCommands
 	Config      *git_commands.ConfigCommands
@@ -63,43 +59,17 @@ func NewGitCommand(
 	version *git_commands.GitVersion,
 	osCommand *oscommands.OSCommand,
 	gitConfig git_config.IGitConfig,
-	syncMutex *deadlock.Mutex,
 ) (*GitCommand, error) {
-	currentPath, err := os.Getwd()
-	if err != nil {
-		return nil, utils.WrapError(err)
-	}
-
-	// converting to forward slashes for the sake of windows (which uses backwards slashes). We want everything
-	// to have forward slashes internally
-	currentPath = filepath.ToSlash(currentPath)
-
-	gitDir := env.GetGitDirEnv()
-	if gitDir != "" {
-		// we've been given the git directory explicitly so no need to navigate to it
-		_, err := cmn.Fs.Stat(gitDir)
-		if err != nil {
-			return nil, utils.WrapError(err)
-		}
-	} else {
-		// we haven't been given the git dir explicitly so we assume it's in the current working directory as `.git/` (or an ancestor directory)
-
-		rootDirectory, err := findWorktreeRoot(cmn.Fs, currentPath)
-		if err != nil {
-			return nil, utils.WrapError(err)
-		}
-		currentPath = rootDirectory
-		err = os.Chdir(rootDirectory)
-		if err != nil {
-			return nil, utils.WrapError(err)
-		}
-	}
-
-	repoPaths, err := git_commands.GetRepoPaths(cmn.Fs, currentPath)
+	repoPaths, err := git_commands.GetRepoPaths(osCommand.Cmd, version)
 	if err != nil {
 		return nil, errors.Errorf("Error getting repo paths: %v", err)
 	}
 
+	err = os.Chdir(repoPaths.WorktreePath())
+	if err != nil {
+		return nil, utils.WrapError(err)
+	}
+
 	repository, err := gogit.PlainOpenWithOptions(
 		repoPaths.WorktreeGitDirPath(),
 		&gogit.PlainOpenOptions{DetectDotGit: false, EnableDotGitCommonDir: true},
@@ -118,7 +88,6 @@ func NewGitCommand(
 		gitConfig,
 		repoPaths,
 		repository,
-		syncMutex,
 	), nil
 }
 
@@ -129,7 +98,6 @@ func NewGitCommandAux(
 	gitConfig git_config.IGitConfig,
 	repoPaths *git_commands.RepoPaths,
 	repo *gogit.Repository,
-	syncMutex *deadlock.Mutex,
 ) *GitCommand {
 	cmd := NewGitCmdObjBuilder(cmn.Log, osCommand.Cmd)
 
@@ -140,7 +108,7 @@ func NewGitCommandAux(
 	// common ones are: cmn, osCommand, dotGitDir, configCommands
 	configCommands := git_commands.NewConfigCommands(cmn, gitConfig, repo)
 
-	gitCommon := git_commands.NewGitCommon(cmn, version, cmd, osCommand, repoPaths, repo, configCommands, syncMutex)
+	gitCommon := git_commands.NewGitCommon(cmn, version, cmd, osCommand, repoPaths, repo, configCommands)
 
 	fileLoader := git_commands.NewFileLoader(gitCommon, cmd, configCommands)
 	statusCommands := git_commands.NewStatusCommands(gitCommon)
@@ -159,13 +127,12 @@ func NewGitCommandAux(
 	stashCommands := git_commands.NewStashCommands(gitCommon, fileLoader, workingTreeCommands)
 	patchBuilder := patch.NewPatchBuilder(cmn.Log,
 		func(from string, to string, reverse bool, filename string, plain bool) (string, error) {
-			// TODO: make patch builder take Gui.IgnoreWhitespaceInDiffView into
-			// account. For now we just pass false.
-			return workingTreeCommands.ShowFileDiff(from, to, reverse, filename, plain, false)
+			return workingTreeCommands.ShowFileDiff(from, to, reverse, filename, plain)
 		})
 	patchCommands := git_commands.NewPatchCommands(gitCommon, rebaseCommands, commitCommands, statusCommands, stashCommands, patchBuilder)
 	bisectCommands := git_commands.NewBisectCommands(gitCommon)
 	worktreeCommands := git_commands.NewWorktreeCommands(gitCommon)
+	blameCommands := git_commands.NewBlameCommands(gitCommon)
 
 	branchLoader := git_commands.NewBranchLoader(cmn, cmd, branchCommands.CurrentBranchInfo, configCommands)
 	commitFileLoader := git_commands.NewCommitFileLoader(cmn, cmd)
@@ -177,6 +144,7 @@ func NewGitCommandAux(
 	tagLoader := git_commands.NewTagLoader(cmn, cmd)
 
 	return &GitCommand{
+		Blame:       blameCommands,
 		Branch:      branchCommands,
 		Commit:      commitCommands,
 		Config:      configCommands,
@@ -211,32 +179,6 @@ func NewGitCommandAux(
 	}
 }
 
-// this returns the root of the current worktree. So if you start lazygit from within
-// a subdirectory of the worktree, it will start in the context of the root of that worktree
-func findWorktreeRoot(fs afero.Fs, currentPath string) (string, error) {
-	for {
-		// we don't care if .git is a directory or a file: either is okay.
-		_, err := fs.Stat(path.Join(currentPath, ".git"))
-
-		if err == nil {
-			return currentPath, nil
-		}
-
-		if !os.IsNotExist(err) {
-			return "", utils.WrapError(err)
-		}
-
-		currentPath = path.Dir(currentPath)
-
-		atRoot := currentPath == path.Dir(currentPath)
-		if atRoot {
-			// we should never really land here: the code that creates GitCommand should
-			// verify we're in a git directory
-			return "", errors.New("Must open lazygit in a git repository")
-		}
-	}
-}
-
 func VerifyInGitRepo(osCommand *oscommands.OSCommand) error {
 	return osCommand.Cmd.New(git_commands.NewGitCmd("rev-parse").Arg("--git-dir").ToArgv()).DontLog().Run()
 }

pkg/commands/git_commands/bisect.go

@@ -76,7 +76,7 @@ func (self *BisectCommands) GetInfoForGitDir(gitDir string) *BisectInfo {
 			return info
 		}
 
-		sha := strings.TrimSpace(string(fileContent))
+		hash := strings.TrimSpace(string(fileContent))
 
 		if name == info.newTerm {
 			status = BisectStatusNew
@@ -86,7 +86,7 @@ func (self *BisectCommands) GetInfoForGitDir(gitDir string) *BisectInfo {
 			status = BisectStatusSkipped
 		}
 
-		info.statusMap[sha] = status
+		info.statusMap[hash] = status
 	}
 
 	currentContent, err := os.ReadFile(filepath.Join(gitDir, "BISECT_EXPECTED_REV"))
@@ -94,8 +94,8 @@ func (self *BisectCommands) GetInfoForGitDir(gitDir string) *BisectInfo {
 		self.Log.Infof("error getting git bisect info: %s", err.Error())
 		return info
 	}
-	currentSha := strings.TrimSpace(string(currentContent))
-	info.current = currentSha
+	currentHash := strings.TrimSpace(string(currentContent))
+	info.current = currentHash
 
 	return info
 }
@@ -135,7 +135,7 @@ func (self *BisectCommands) StartWithTerms(oldTerm string, newTerm string) error
 }
 
 // tells us whether we've found our problem commit(s). We return a string slice of
-// commit sha's if we're done, and that slice may have more that one item if
+// commit hashes if we're done, and that slice may have more that one item if
 // skipped commits are involved.
 func (self *BisectCommands) IsDone() (bool, []string, error) {
 	info := self.GetInfo()
@@ -143,8 +143,8 @@ func (self *BisectCommands) IsDone() (bool, []string, error) {
 		return false, nil, nil
 	}
 
-	newSha := info.GetNewSha()
-	if newSha == "" {
+	newHash := info.GetNewHash()
+	if newHash == "" {
 		return false, nil, nil
 	}
 
@@ -153,14 +153,14 @@ func (self *BisectCommands) IsDone() (bool, []string, error) {
 	done := false
 	candidates := []string{}
 
-	cmdArgs := NewGitCmd("rev-list").Arg(newSha).ToArgv()
+	cmdArgs := NewGitCmd("rev-list").Arg(newHash).ToArgv()
 	err := self.cmd.New(cmdArgs).RunAndProcessLines(func(line string) (bool, error) {
-		sha := strings.TrimSpace(line)
+		hash := strings.TrimSpace(line)
 
-		if status, ok := info.statusMap[sha]; ok {
+		if status, ok := info.statusMap[hash]; ok {
 			switch status {
 			case BisectStatusSkipped, BisectStatusNew:
-				candidates = append(candidates, sha)
+				candidates = append(candidates, hash)
 				return false, nil
 			case BisectStatusOld:
 				done = true
@@ -185,7 +185,7 @@ func (self *BisectCommands) IsDone() (bool, []string, error) {
 // render the commits from the bad commit.
 func (self *BisectCommands) ReachableFromStart(bisectInfo *BisectInfo) bool {
 	cmdArgs := NewGitCmd("merge-base").
-		Arg("--is-ancestor", bisectInfo.GetNewSha(), bisectInfo.GetStartSha()).
+		Arg("--is-ancestor", bisectInfo.GetNewHash(), bisectInfo.GetStartHash()).
 		ToArgv()
 
 	err := self.cmd.New(cmdArgs).DontLog().Run()

pkg/commands/git_commands/bisect_info.go

@@ -29,10 +29,10 @@ type BisectInfo struct {
 	newTerm string // 'bad' by default
 	oldTerm string // 'good' by default
 
-	// map of commit sha's to their status
+	// map of commit hashes to their status
 	statusMap map[string]BisectStatus
 
-	// the sha of the commit that's under test
+	// the hash of the commit that's under test
 	current string
 }
 
@@ -49,26 +49,26 @@ func NewNullBisectInfo() *BisectInfo {
 	return &BisectInfo{started: false}
 }
 
-func (self *BisectInfo) GetNewSha() string {
-	for sha, status := range self.statusMap {
+func (self *BisectInfo) GetNewHash() string {
+	for hash, status := range self.statusMap {
 		if status == BisectStatusNew {
-			return sha
+			return hash
 		}
 	}
 
 	return ""
 }
 
-func (self *BisectInfo) GetCurrentSha() string {
+func (self *BisectInfo) GetCurrentHash() string {
 	return self.current
 }
 
-func (self *BisectInfo) GetStartSha() string {
+func (self *BisectInfo) GetStartHash() string {
 	return self.start
 }
 
-func (self *BisectInfo) Status(commitSha string) (BisectStatus, bool) {
-	status, ok := self.statusMap[commitSha]
+func (self *BisectInfo) Status(commitHash string) (BisectStatus, bool) {
+	status, ok := self.statusMap[commitHash]
 	return status, ok
 }
 
@@ -93,7 +93,7 @@ func (self *BisectInfo) Bisecting() bool {
 		return false
 	}
 
-	if self.GetNewSha() == "" {
+	if self.GetNewHash() == "" {
 		return false
 	}
 

pkg/commands/git_commands/blame.go

@@ -0,0 +1,33 @@
+package git_commands
+
+import (
+	"fmt"
+)
+
+type BlameCommands struct {
+	*GitCommon
+}
+
+func NewBlameCommands(gitCommon *GitCommon) *BlameCommands {
+	return &BlameCommands{
+		GitCommon: gitCommon,
+	}
+}
+
+// Blame a range of lines. For each line, output the hash of the commit where
+// the line last changed, then a space, then a description of the commit (author
+// and date), another space, and then the line. For example:
+//
+//	ac90ebac688fe8bc2ffd922157a9d2c54681d2aa (Stefan Haller 2023-08-01 14:54:56 +0200 11) func NewBlameCommands(gitCommon *GitCommon) *BlameCommands {
+//	ac90ebac688fe8bc2ffd922157a9d2c54681d2aa (Stefan Haller 2023-08-01 14:54:56 +0200 12) 	return &BlameCommands{
+//	ac90ebac688fe8bc2ffd922157a9d2c54681d2aa (Stefan Haller 2023-08-01 14:54:56 +0200 13) 		GitCommon: gitCommon,
+func (self *BlameCommands) BlameLineRange(filename string, commit string, firstLine int, numLines int) (string, error) {
+	cmdArgs := NewGitCmd("blame").
+		Arg("-l").
+		Arg(fmt.Sprintf("-L%d,+%d", firstLine, numLines)).
+		Arg(commit).
+		Arg("--").
+		Arg(filename)
+
+	return self.cmd.New(cmdArgs.ToArgv()).RunWithOutput()
+}

pkg/commands/git_commands/branch.go

@@ -28,6 +28,17 @@ func (self *BranchCommands) New(name string, base string) error {
 	return self.cmd.New(cmdArgs).Run()
 }
 
+// CreateWithUpstream creates a new branch with a given upstream, but without
+// checking it out
+func (self *BranchCommands) CreateWithUpstream(name string, upstream string) error {
+	cmdArgs := NewGitCmd("branch").
+		Arg("--track").
+		Arg(name, upstream).
+		ToArgv()
+
+	return self.cmd.New(cmdArgs).Run()
+}
+
 // CurrentBranchInfo get the current branch information.
 func (self *BranchCommands) CurrentBranchInfo() (BranchInfo, error) {
 	branchName, err := self.cmd.New(
@@ -54,10 +65,10 @@ func (self *BranchCommands) CurrentBranchInfo() (BranchInfo, error) {
 	for _, line := range utils.SplitLines(output) {
 		split := strings.Split(strings.TrimRight(line, "\r\n"), "\x00")
 		if len(split) == 3 && split[0] == "*" {
-			sha := split[1]
+			hash := split[1]
 			displayName := split[2]
 			return BranchInfo{
-				RefName:      sha,
+				RefName:      hash,
 				DisplayName:  displayName,
 				DetachedHead: true,
 			}, nil
@@ -85,8 +96,8 @@ func (self *BranchCommands) CurrentBranchName() (string, error) {
 	return "", err
 }
 
-// Delete delete branch
-func (self *BranchCommands) Delete(branch string, force bool) error {
+// LocalDelete delete branch locally
+func (self *BranchCommands) LocalDelete(branch string, force bool) error {
 	cmdArgs := NewGitCmd("branch").
 		ArgIfElse(force, "-D", "-d").
 		Arg(branch).
@@ -210,7 +221,7 @@ type MergeOpts struct {
 func (self *BranchCommands) Merge(branchName string, opts MergeOpts) error {
 	cmdArgs := NewGitCmd("merge").
 		Arg("--no-edit").
-		ArgIf(self.UserConfig.Git.Merging.Args != "", self.UserConfig.Git.Merging.Args).
+		Arg(strings.Fields(self.UserConfig.Git.Merging.Args)...).
 		ArgIf(opts.FastForwardOnly, "--ff-only").
 		Arg(branchName).
 		ToArgv()

pkg/commands/git_commands/branch_loader.go

@@ -3,6 +3,7 @@ package git_commands
 import (
 	"fmt"
 	"regexp"
+	"strconv"
 	"strings"
 
 	"github.com/jesseduffield/generics/set"
@@ -62,33 +63,34 @@ func NewBranchLoader(
 func (self *BranchLoader) Load(reflogCommits []*models.Commit) ([]*models.Branch, error) {
 	branches := self.obtainBranches()
 
-	reflogBranches := self.obtainReflogBranches(reflogCommits)
-
-	// loop through reflog branches. If there is a match, merge them, then remove it from the branches and keep it in the reflog branches
-	branchesWithRecency := make([]*models.Branch, 0)
-outer:
-	for _, reflogBranch := range reflogBranches {
-		for j, branch := range branches {
-			if branch.Head {
-				continue
-			}
-			if strings.EqualFold(reflogBranch.Name, branch.Name) {
-				branch.Recency = reflogBranch.Recency
-				branchesWithRecency = append(branchesWithRecency, branch)
-				branches = utils.Remove(branches, j)
-				continue outer
+	if self.AppState.LocalBranchSortOrder == "recency" {
+		reflogBranches := self.obtainReflogBranches(reflogCommits)
+		// loop through reflog branches. If there is a match, merge them, then remove it from the branches and keep it in the reflog branches
+		branchesWithRecency := make([]*models.Branch, 0)
+	outer:
+		for _, reflogBranch := range reflogBranches {
+			for j, branch := range branches {
+				if branch.Head {
+					continue
+				}
+				if strings.EqualFold(reflogBranch.Name, branch.Name) {
+					branch.Recency = reflogBranch.Recency
+					branchesWithRecency = append(branchesWithRecency, branch)
+					branches = utils.Remove(branches, j)
+					continue outer
+				}
 			}
 		}
+
+		// Sort branches that don't have a recency value alphabetically
+		// (we're really doing this for the sake of deterministic behaviour across git versions)
+		slices.SortFunc(branches, func(a *models.Branch, b *models.Branch) bool {
+			return a.Name < b.Name
+		})
+
+		branches = utils.Prepend(branches, branchesWithRecency...)
 	}
 
-	// Sort branches that don't have a recency value alphabetically
-	// (we're really doing this for the sake of deterministic behaviour across git versions)
-	slices.SortFunc(branches, func(a *models.Branch, b *models.Branch) bool {
-		return a.Name < b.Name
-	})
-
-	branches = utils.Prepend(branches, branchesWithRecency...)
-
 	foundHead := false
 	for i, branch := range branches {
 		if branch.Head {
@@ -144,7 +146,8 @@ func (self *BranchLoader) obtainBranches() []*models.Branch {
 			return nil, false
 		}
 
-		return obtainBranch(split), true
+		storeCommitDateAsRecency := self.AppState.LocalBranchSortOrder != "recency"
+		return obtainBranch(split, storeCommitDateAsRecency), true
 	})
 }
 
@@ -156,8 +159,18 @@ func (self *BranchLoader) getRawBranches() (string, error) {
 		"%00",
 	)
 
+	var sortOrder string
+	switch strings.ToLower(self.AppState.LocalBranchSortOrder) {
+	case "recency", "date":
+		sortOrder = "-committerdate"
+	case "alphabetical":
+		sortOrder = "refname"
+	default:
+		sortOrder = "refname"
+	}
+
 	cmdArgs := NewGitCmd("for-each-ref").
-		Arg("--sort=-committerdate").
+		Arg(fmt.Sprintf("--sort=%s", sortOrder)).
 		Arg(fmt.Sprintf("--format=%s", format)).
 		Arg("refs/heads").
 		ToArgv()
@@ -172,22 +185,32 @@ var branchFields = []string{
 	"upstream:track",
 	"subject",
 	"objectname",
+	"committerdate:unix",
 }
 
 // Obtain branch information from parsed line output of getRawBranches()
-func obtainBranch(split []string) *models.Branch {
+func obtainBranch(split []string, storeCommitDateAsRecency bool) *models.Branch {
 	headMarker := split[0]
 	fullName := split[1]
 	upstreamName := split[2]
 	track := split[3]
 	subject := split[4]
 	commitHash := split[5]
+	commitDate := split[6]
 
 	name := strings.TrimPrefix(fullName, "heads/")
 	pushables, pullables, gone := parseUpstreamInfo(upstreamName, track)
 
+	recency := ""
+	if storeCommitDateAsRecency {
+		if unixTimestamp, err := strconv.ParseInt(commitDate, 10, 64); err == nil {
+			recency = utils.UnixToTimeAgo(unixTimestamp)
+		}
+	}
+
 	return &models.Branch{
 		Name:         name,
+		Recency:      recency,
 		Pushables:    pushables,
 		Pullables:    pullables,
 		UpstreamGone: gone,

pkg/commands/git_commands/branch_loader_test.go

@@ -2,7 +2,9 @@ package git_commands
 
 // "*|feat/detect-purge|origin/feat/detect-purge|[ahead 1]"
 import (
+	"strconv"
 	"testing"
+	"time"
 
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
 	"github.com/stretchr/testify/assert"
@@ -10,15 +12,21 @@ import (
 
 func TestObtainBranch(t *testing.T) {
 	type scenario struct {
-		testName       string
-		input          []string
-		expectedBranch *models.Branch
+		testName                 string
+		input                    []string
+		storeCommitDateAsRecency bool
+		expectedBranch           *models.Branch
 	}
 
+	// Use a time stamp of 2 1/2 hours ago, resulting in a recency string of "2h"
+	now := time.Now().Unix()
+	timeStamp := strconv.Itoa(int(now - 2.5*60*60))
+
 	scenarios := []scenario{
 		{
-			testName: "TrimHeads",
-			input:    []string{"", "heads/a_branch", "", "", "subject", "123"},
+			testName:                 "TrimHeads",
+			input:                    []string{"", "heads/a_branch", "", "", "subject", "123", timeStamp},
+			storeCommitDateAsRecency: false,
 			expectedBranch: &models.Branch{
 				Name:       "a_branch",
 				Pushables:  "?",
@@ -29,8 +37,9 @@ func TestObtainBranch(t *testing.T) {
 			},
 		},
 		{
-			testName: "NoUpstream",
-			input:    []string{"", "a_branch", "", "", "subject", "123"},
+			testName:                 "NoUpstream",
+			input:                    []string{"", "a_branch", "", "", "subject", "123", timeStamp},
+			storeCommitDateAsRecency: false,
 			expectedBranch: &models.Branch{
 				Name:       "a_branch",
 				Pushables:  "?",
@@ -41,8 +50,9 @@ func TestObtainBranch(t *testing.T) {
 			},
 		},
 		{
-			testName: "IsHead",
-			input:    []string{"*", "a_branch", "", "", "subject", "123"},
+			testName:                 "IsHead",
+			input:                    []string{"*", "a_branch", "", "", "subject", "123", timeStamp},
+			storeCommitDateAsRecency: false,
 			expectedBranch: &models.Branch{
 				Name:       "a_branch",
 				Pushables:  "?",
@@ -53,8 +63,9 @@ func TestObtainBranch(t *testing.T) {
 			},
 		},
 		{
-			testName: "IsBehindAndAhead",
-			input:    []string{"", "a_branch", "a_remote/a_branch", "[behind 2, ahead 3]", "subject", "123"},
+			testName:                 "IsBehindAndAhead",
+			input:                    []string{"", "a_branch", "a_remote/a_branch", "[behind 2, ahead 3]", "subject", "123", timeStamp},
+			storeCommitDateAsRecency: false,
 			expectedBranch: &models.Branch{
 				Name:       "a_branch",
 				Pushables:  "3",
@@ -65,8 +76,9 @@ func TestObtainBranch(t *testing.T) {
 			},
 		},
 		{
-			testName: "RemoteBranchIsGone",
-			input:    []string{"", "a_branch", "a_remote/a_branch", "[gone]", "subject", "123"},
+			testName:                 "RemoteBranchIsGone",
+			input:                    []string{"", "a_branch", "a_remote/a_branch", "[gone]", "subject", "123", timeStamp},
+			storeCommitDateAsRecency: false,
 			expectedBranch: &models.Branch{
 				Name:         "a_branch",
 				UpstreamGone: true,
@@ -77,11 +89,25 @@ func TestObtainBranch(t *testing.T) {
 				CommitHash:   "123",
 			},
 		},
+		{
+			testName:                 "WithCommitDateAsRecency",
+			input:                    []string{"", "a_branch", "", "", "subject", "123", timeStamp},
+			storeCommitDateAsRecency: true,
+			expectedBranch: &models.Branch{
+				Name:       "a_branch",
+				Recency:    "2h",
+				Pushables:  "?",
+				Pullables:  "?",
+				Head:       false,
+				Subject:    "subject",
+				CommitHash: "123",
+			},
+		},
 	}
 
 	for _, s := range scenarios {
 		t.Run(s.testName, func(t *testing.T) {
-			branch := obtainBranch(s.input)
+			branch := obtainBranch(s.input, s.storeCommitDateAsRecency)
 			assert.EqualValues(t, s.expectedBranch, branch)
 		})
 	}

pkg/commands/git_commands/branch_test.go

@@ -93,7 +93,7 @@ func TestBranchDeleteBranch(t *testing.T) {
 		t.Run(s.testName, func(t *testing.T) {
 			instance := buildBranchCommands(commonDeps{runner: s.runner})
 
-			s.test(instance.Delete("test", s.force))
+			s.test(instance.LocalDelete("test", s.force))
 			s.runner.CheckForMissingCalls()
 		})
 	}
@@ -127,6 +127,19 @@ func TestBranchMerge(t *testing.T) {
 			branchName: "mybranch",
 			expected:   []string{"merge", "--no-edit", "--merging-args", "mybranch"},
 		},
+		{
+			testName: "multiple merging args",
+			userConfig: &config.UserConfig{
+				Git: config.GitConfig{
+					Merging: config.MergingConfig{
+						Args: "--arg1 --arg2", // it's up to the user what they put here
+					},
+				},
+			},
+			opts:       MergeOpts{},
+			branchName: "mybranch",
+			expected:   []string{"merge", "--no-edit", "--arg1", "--arg2", "mybranch"},
+		},
 		{
 			testName:   "fast forward only",
 			userConfig: &config.UserConfig{},

pkg/commands/git_commands/commit.go

@@ -38,9 +38,44 @@ func (self *CommitCommands) SetAuthor(value string) error {
 	return self.cmd.New(cmdArgs).Run()
 }
 
+// Add a commit's coauthor using Github/Gitlab Co-authored-by metadata. Value is expected to be of the form 'Name <Email>'
+func (self *CommitCommands) AddCoAuthor(hash string, author string) error {
+	message, err := self.GetCommitMessage(hash)
+	if err != nil {
+		return err
+	}
+
+	message = AddCoAuthorToMessage(message, author)
+
+	cmdArgs := NewGitCmd("commit").
+		Arg("--allow-empty", "--amend", "--only", "-m", message).
+		ToArgv()
+
+	return self.cmd.New(cmdArgs).Run()
+}
+
+func AddCoAuthorToMessage(message string, author string) string {
+	subject, body, _ := strings.Cut(message, "\n")
+
+	return strings.TrimSpace(subject) + "\n\n" + AddCoAuthorToDescription(strings.TrimSpace(body), author)
+}
+
+func AddCoAuthorToDescription(description string, author string) string {
+	if description != "" {
+		lines := strings.Split(description, "\n")
+		if strings.HasPrefix(lines[len(lines)-1], "Co-authored-by:") {
+			description += "\n"
+		} else {
+			description += "\n\n"
+		}
+	}
+
+	return description + fmt.Sprintf("Co-authored-by: %s", author)
+}
+
 // ResetToCommit reset to commit
-func (self *CommitCommands) ResetToCommit(sha string, strength string, envVars []string) error {
-	cmdArgs := NewGitCmd("reset").Arg("--"+strength, sha).ToArgv()
+func (self *CommitCommands) ResetToCommit(hash string, strength string, envVars []string) error {
+	cmdArgs := NewGitCmd("reset").Arg("--"+strength, hash).ToArgv()
 
 	return self.cmd.New(cmdArgs).
 		// prevents git from prompting us for input which would freeze the program
@@ -68,6 +103,19 @@ func (self *CommitCommands) RewordLastCommitInEditorCmdObj() oscommands.ICmdObj
 	return self.cmd.New(NewGitCmd("commit").Arg("--allow-empty", "--amend", "--only").ToArgv())
 }
 
+func (self *CommitCommands) RewordLastCommitInEditorWithMessageFileCmdObj(tmpMessageFile string) oscommands.ICmdObj {
+	return self.cmd.New(NewGitCmd("commit").
+		Arg("--allow-empty", "--amend", "--only", "--edit", "--file="+tmpMessageFile).ToArgv())
+}
+
+func (self *CommitCommands) CommitInEditorWithMessageFileCmdObj(tmpMessageFile string) oscommands.ICmdObj {
+	return self.cmd.New(NewGitCmd("commit").
+		Arg("--edit").
+		Arg("--file="+tmpMessageFile).
+		ArgIf(self.signoffFlag() != "", self.signoffFlag()).
+		ToArgv())
+}
+
 // RewordLastCommit rewords the topmost commit with the given message
 func (self *CommitCommands) RewordLastCommit(summary string, description string) error {
 	messageArgs := self.commitMessageArgs(summary, description)
@@ -107,18 +155,28 @@ func (self *CommitCommands) signoffFlag() string {
 	}
 }
 
-func (self *CommitCommands) GetCommitMessage(commitSha string) (string, error) {
-	cmdArgs := NewGitCmd("rev-list").
-		Arg("--format=%B", "--max-count=1", commitSha).
+func (self *CommitCommands) GetCommitMessage(commitHash string) (string, error) {
+	cmdArgs := NewGitCmd("log").
+		Arg("--format=%B", "--max-count=1", commitHash).
+		Config("log.showsignature=false").
 		ToArgv()
 
-	messageWithHeader, err := self.cmd.New(cmdArgs).DontLog().RunWithOutput()
-	message := strings.Join(strings.SplitAfter(messageWithHeader, "\n")[1:], "")
-	return strings.TrimSpace(message), err
+	message, err := self.cmd.New(cmdArgs).DontLog().RunWithOutput()
+	return strings.ReplaceAll(strings.TrimSpace(message), "\r\n", "\n"), err
 }
 
-func (self *CommitCommands) GetCommitDiff(commitSha string) (string, error) {
-	cmdArgs := NewGitCmd("show").Arg("--no-color", commitSha).ToArgv()
+func (self *CommitCommands) GetCommitSubject(commitHash string) (string, error) {
+	cmdArgs := NewGitCmd("log").
+		Arg("--format=%s", "--max-count=1", commitHash).
+		Config("log.showsignature=false").
+		ToArgv()
+
+	subject, err := self.cmd.New(cmdArgs).DontLog().RunWithOutput()
+	return strings.TrimSpace(subject), err
+}
+
+func (self *CommitCommands) GetCommitDiff(commitHash string) (string, error) {
+	cmdArgs := NewGitCmd("show").Arg("--no-color", commitHash).ToArgv()
 
 	diff, err := self.cmd.New(cmdArgs).DontLog().RunWithOutput()
 	return diff, err
@@ -129,9 +187,9 @@ type Author struct {
 	Email string
 }
 
-func (self *CommitCommands) GetCommitAuthor(commitSha string) (Author, error) {
+func (self *CommitCommands) GetCommitAuthor(commitHash string) (Author, error) {
 	cmdArgs := NewGitCmd("show").
-		Arg("--no-patch", "--pretty=format:'%an%x00%ae'", commitSha).
+		Arg("--no-patch", "--pretty=format:'%an%x00%ae'", commitHash).
 		ToArgv()
 
 	output, err := self.cmd.New(cmdArgs).DontLog().RunWithOutput()
@@ -148,23 +206,37 @@ func (self *CommitCommands) GetCommitAuthor(commitSha string) (Author, error) {
 	return author, err
 }
 
-func (self *CommitCommands) GetCommitMessageFirstLine(sha string) (string, error) {
-	return self.GetCommitMessagesFirstLine([]string{sha})
+func (self *CommitCommands) GetCommitMessageFirstLine(hash string) (string, error) {
+	return self.GetCommitMessagesFirstLine([]string{hash})
 }
 
-func (self *CommitCommands) GetCommitMessagesFirstLine(shas []string) (string, error) {
+func (self *CommitCommands) GetCommitMessagesFirstLine(hashes []string) (string, error) {
 	cmdArgs := NewGitCmd("show").
 		Arg("--no-patch", "--pretty=format:%s").
-		Arg(shas...).
+		Arg(hashes...).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).DontLog().RunWithOutput()
 }
 
-func (self *CommitCommands) GetCommitsOneline(shas []string) (string, error) {
+// Example output:
+//
+//	cd50c79ae Preserve the commit message correctly even if the description has blank lines
+//	3ebba5f32 Add test demonstrating a bug with preserving the commit message
+//	9a423c388 Remove unused function
+func (self *CommitCommands) GetHashesAndCommitMessagesFirstLine(hashes []string) (string, error) {
+	cmdArgs := NewGitCmd("show").
+		Arg("--no-patch", "--pretty=format:%h %s").
+		Arg(hashes...).
+		ToArgv()
+
+	return self.cmd.New(cmdArgs).DontLog().RunWithOutput()
+}
+
+func (self *CommitCommands) GetCommitsOneline(hashes []string) (string, error) {
 	cmdArgs := NewGitCmd("show").
 		Arg("--no-patch", "--oneline").
-		Arg(shas...).
+		Arg(hashes...).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).DontLog().RunWithOutput()
@@ -183,41 +255,61 @@ func (self *CommitCommands) AmendHeadCmdObj() oscommands.ICmdObj {
 	return self.cmd.New(cmdArgs)
 }
 
-func (self *CommitCommands) ShowCmdObj(sha string, filterPath string, ignoreWhitespace bool) oscommands.ICmdObj {
-	contextSize := self.UserConfig.Git.DiffContextSize
+func (self *CommitCommands) ShowCmdObj(hash string, filterPath string) oscommands.ICmdObj {
+	contextSize := self.AppState.DiffContextSize
 
+	extDiffCmd := self.UserConfig.Git.Paging.ExternalDiffCommand
 	cmdArgs := NewGitCmd("show").
+		Config("diff.noprefix=false").
+		ConfigIf(extDiffCmd != "", "diff.external="+extDiffCmd).
+		ArgIfElse(extDiffCmd != "", "--ext-diff", "--no-ext-diff").
 		Arg("--submodule").
 		Arg("--color="+self.UserConfig.Git.Paging.ColorArg).
 		Arg(fmt.Sprintf("--unified=%d", contextSize)).
 		Arg("--stat").
 		Arg("--decorate").
 		Arg("-p").
-		Arg(sha).
-		ArgIf(ignoreWhitespace, "--ignore-all-space").
+		Arg(hash).
+		ArgIf(self.AppState.IgnoreWhitespaceInDiffView, "--ignore-all-space").
 		ArgIf(filterPath != "", "--", filterPath).
+		Dir(self.repoPaths.worktreePath).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).DontLog()
 }
 
-// Revert reverts the selected commit by sha
-func (self *CommitCommands) Revert(sha string) error {
-	cmdArgs := NewGitCmd("revert").Arg(sha).ToArgv()
+// Revert reverts the selected commit by hash
+func (self *CommitCommands) Revert(hash string) error {
+	cmdArgs := NewGitCmd("revert").Arg(hash).ToArgv()
 
 	return self.cmd.New(cmdArgs).Run()
 }
 
-func (self *CommitCommands) RevertMerge(sha string, parentNumber int) error {
-	cmdArgs := NewGitCmd("revert").Arg(sha, "-m", fmt.Sprintf("%d", parentNumber)).
+func (self *CommitCommands) RevertMerge(hash string, parentNumber int) error {
+	cmdArgs := NewGitCmd("revert").Arg(hash, "-m", fmt.Sprintf("%d", parentNumber)).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).Run()
 }
 
 // CreateFixupCommit creates a commit that fixes up a previous commit
-func (self *CommitCommands) CreateFixupCommit(sha string) error {
-	cmdArgs := NewGitCmd("commit").Arg("--fixup=" + sha).ToArgv()
+func (self *CommitCommands) CreateFixupCommit(hash string) error {
+	cmdArgs := NewGitCmd("commit").Arg("--fixup=" + hash).ToArgv()
+
+	return self.cmd.New(cmdArgs).Run()
+}
+
+// CreateAmendCommit creates a commit that changes the commit message of a previous commit
+func (self *CommitCommands) CreateAmendCommit(originalSubject, newSubject, newDescription string, includeFileChanges bool) error {
+	description := newSubject
+	if newDescription != "" {
+		description += "\n\n" + newDescription
+	}
+	cmdArgs := NewGitCmd("commit").
+		Arg("-m", "amend! "+originalSubject).
+		Arg("-m", description).
+		ArgIf(!includeFileChanges, "--only", "--allow-empty").
+		ToArgv()
 
 	return self.cmd.New(cmdArgs).Run()
 }

pkg/commands/git_commands/commit_file_loader.go

@@ -24,6 +24,7 @@ func NewCommitFileLoader(common *common.Common, cmd oscommands.ICmdObjBuilder) *
 // GetFilesInDiff get the specified commit files
 func (self *CommitFileLoader) GetFilesInDiff(from string, to string, reverse bool) ([]*models.CommitFile, error) {
 	cmdArgs := NewGitCmd("diff").
+		Config("diff.noprefix=false").
 		Arg("--submodule").
 		Arg("--no-ext-diff").
 		Arg("--name-status").

pkg/commands/git_commands/commit_loader.go

@@ -6,17 +6,18 @@ import (
 	"os"
 	"path/filepath"
 	"regexp"
+	"sort"
 	"strconv"
 	"strings"
 	"sync"
 
-	"github.com/fsmiamoto/git-todo-parser/todo"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
 	"github.com/jesseduffield/lazygit/pkg/commands/oscommands"
 	"github.com/jesseduffield/lazygit/pkg/commands/types/enums"
 	"github.com/jesseduffield/lazygit/pkg/common"
 	"github.com/jesseduffield/lazygit/pkg/utils"
 	"github.com/samber/lo"
+	"github.com/stefanhaller/git-todo-parser/todo"
 )
 
 // context:
@@ -63,10 +64,14 @@ func NewCommitLoader(
 type GetCommitsOptions struct {
 	Limit                bool
 	FilterPath           string
+	FilterAuthor         string
 	IncludeRebaseCommits bool
 	RefName              string // e.g. "HEAD" or "my_branch"
+	RefForPushedStatus   string // the ref to use for determining pushed/unpushed status
 	// determines if we show the whole git graph i.e. pass the '--all' flag
 	All bool
+	// If non-empty, show divergence from this ref (left-right log)
+	RefToShowDivergenceFrom string
 }
 
 // GetCommits obtains the commits of the current branch
@@ -92,22 +97,26 @@ func (self *CommitLoader) GetCommits(opts GetCommitsOptions) ([]*models.Commit,
 		defer wg.Done()
 
 		logErr = self.getLogCmd(opts).RunAndProcessLines(func(line string) (bool, error) {
-			commit := self.extractCommitFromLine(line)
+			commit := self.extractCommitFromLine(line, opts.RefToShowDivergenceFrom != "")
 			commits = append(commits, commit)
 			return false, nil
 		})
 	})
 
 	var ancestor string
+	var remoteAncestor string
 	go utils.Safe(func() {
 		defer wg.Done()
 
 		ancestor = self.getMergeBase(opts.RefName)
+		if opts.RefToShowDivergenceFrom != "" {
+			remoteAncestor = self.getMergeBase(opts.RefToShowDivergenceFrom)
+		}
 	})
 
 	passedFirstPushedCommit := false
 	// I can get this before
-	firstPushedCommit, err := self.getFirstPushedCommit(opts.RefName)
+	firstPushedCommit, err := self.getFirstPushedCommit(opts.RefForPushedStatus)
 	if err != nil {
 		// must have no upstream branch so we'll consider everything as pushed
 		passedFirstPushedCommit = true
@@ -120,13 +129,15 @@ func (self *CommitLoader) GetCommits(opts GetCommitsOptions) ([]*models.Commit,
 	}
 
 	for _, commit := range commits {
-		if commit.Sha == firstPushedCommit {
+		if commit.Hash == firstPushedCommit {
 			passedFirstPushedCommit = true
 		}
-		if passedFirstPushedCommit {
-			commit.Status = models.StatusPushed
-		} else {
-			commit.Status = models.StatusUnpushed
+		if commit.Status != models.StatusRebasing {
+			if passedFirstPushedCommit {
+				commit.Status = models.StatusPushed
+			} else {
+				commit.Status = models.StatusUnpushed
+			}
 		}
 	}
 
@@ -134,8 +145,23 @@ func (self *CommitLoader) GetCommits(opts GetCommitsOptions) ([]*models.Commit,
 		return commits, nil
 	}
 
-	if ancestor != "" {
-		commits = setCommitMergedStatuses(ancestor, commits)
+	if opts.RefToShowDivergenceFrom != "" {
+		sort.SliceStable(commits, func(i, j int) bool {
+			// In the divergence view we want incoming commits to come first
+			return commits[i].Divergence > commits[j].Divergence
+		})
+
+		_, localSectionStart, found := lo.FindIndexOf(commits, func(commit *models.Commit) bool {
+			return commit.Divergence == models.DivergenceLeft
+		})
+		if !found {
+			localSectionStart = len(commits)
+		}
+
+		setCommitMergedStatuses(remoteAncestor, commits[:localSectionStart])
+		setCommitMergedStatuses(ancestor, commits[localSectionStart:])
+	} else {
+		setCommitMergedStatuses(ancestor, commits)
 	}
 
 	return commits, nil
@@ -172,20 +198,24 @@ func (self *CommitLoader) MergeRebasingCommits(commits []*models.Commit) ([]*mod
 	return result, nil
 }
 
-// extractCommitFromLine takes a line from a git log and extracts the sha, message, date, and tag if present
+// extractCommitFromLine takes a line from a git log and extracts the hash, message, date, and tag if present
 // then puts them into a commit object
 // example input:
 // 8ad01fe32fcc20f07bc6693f87aa4977c327f1e1|10 hours ago|Jesse Duffield| (HEAD -> master, tag: v0.15.2)|refresh commits when adding a tag
-func (self *CommitLoader) extractCommitFromLine(line string) *models.Commit {
-	split := strings.SplitN(line, "\x00", 7)
+func (self *CommitLoader) extractCommitFromLine(line string, showDivergence bool) *models.Commit {
+	split := strings.SplitN(line, "\x00", 8)
 
-	sha := split[0]
+	hash := split[0]
 	unixTimestamp := split[1]
 	authorName := split[2]
 	authorEmail := split[3]
 	extraInfo := strings.TrimSpace(split[4])
 	parentHashes := split[5]
 	message := split[6]
+	divergence := models.DivergenceNone
+	if showDivergence {
+		divergence = lo.Ternary(split[7] == "<", models.DivergenceLeft, models.DivergenceRight)
+	}
 
 	tags := []string{}
 
@@ -211,7 +241,7 @@ func (self *CommitLoader) extractCommitFromLine(line string) *models.Commit {
 	}
 
 	return &models.Commit{
-		Sha:           sha,
+		Hash:          hash,
 		Name:          message,
 		Tags:          tags,
 		ExtraInfo:     extraInfo,
@@ -219,21 +249,19 @@ func (self *CommitLoader) extractCommitFromLine(line string) *models.Commit {
 		AuthorName:    authorName,
 		AuthorEmail:   authorEmail,
 		Parents:       parents,
+		Divergence:    divergence,
 	}
 }
 
 func (self *CommitLoader) getHydratedRebasingCommits(rebaseMode enums.RebaseMode) ([]*models.Commit, error) {
-	commits, err := self.getRebasingCommits(rebaseMode)
-	if err != nil {
-		return nil, err
-	}
+	commits := self.getRebasingCommits(rebaseMode)
 
 	if len(commits) == 0 {
 		return nil, nil
 	}
 
-	commitShas := lo.FilterMap(commits, func(commit *models.Commit, _ int) (string, bool) {
-		return commit.Sha, commit.Sha != ""
+	commitHashes := lo.FilterMap(commits, func(commit *models.Commit, _ int) (string, bool) {
+		return commit.Hash, commit.Hash != ""
 	})
 
 	// note that we're not filtering these as we do non-rebasing commits just because
@@ -242,14 +270,14 @@ func (self *CommitLoader) getHydratedRebasingCommits(rebaseMode enums.RebaseMode
 		NewGitCmd("show").
 			Config("log.showSignature=false").
 			Arg("--no-patch", "--oneline", "--abbrev=20", prettyFormat).
-			Arg(commitShas...).
+			Arg(commitHashes...).
 			ToArgv(),
 	).DontLog()
 
 	fullCommits := map[string]*models.Commit{}
-	err = cmdObj.RunAndProcessLines(func(line string) (bool, error) {
-		commit := self.extractCommitFromLine(line)
-		fullCommits[commit.Sha] = commit
+	err := cmdObj.RunAndProcessLines(func(line string) (bool, error) {
+		commit := self.extractCommitFromLine(line, false)
+		fullCommits[commit.Hash] = commit
 		return false, nil
 	})
 	if err != nil {
@@ -257,23 +285,23 @@ func (self *CommitLoader) getHydratedRebasingCommits(rebaseMode enums.RebaseMode
 	}
 
 	findFullCommit := lo.Ternary(self.version.IsOlderThan(2, 25, 2),
-		func(sha string) *models.Commit {
+		func(hash string) *models.Commit {
 			for s, c := range fullCommits {
-				if strings.HasPrefix(s, sha) {
+				if strings.HasPrefix(s, hash) {
 					return c
 				}
 			}
 			return nil
 		},
-		func(sha string) *models.Commit {
-			return fullCommits[sha]
+		func(hash string) *models.Commit {
+			return fullCommits[hash]
 		})
 
 	hydratedCommits := make([]*models.Commit, 0, len(commits))
 	for _, rebasingCommit := range commits {
-		if rebasingCommit.Sha == "" {
+		if rebasingCommit.Hash == "" {
 			hydratedCommits = append(hydratedCommits, rebasingCommit)
-		} else if commit := findFullCommit(rebasingCommit.Sha); commit != nil {
+		} else if commit := findFullCommit(rebasingCommit.Hash); commit != nil {
 			commit.Action = rebasingCommit.Action
 			commit.Status = rebasingCommit.Status
 			hydratedCommits = append(hydratedCommits, commit)
@@ -283,73 +311,20 @@ func (self *CommitLoader) getHydratedRebasingCommits(rebaseMode enums.RebaseMode
 }
 
 // getRebasingCommits obtains the commits that we're in the process of rebasing
-func (self *CommitLoader) getRebasingCommits(rebaseMode enums.RebaseMode) ([]*models.Commit, error) {
-	switch rebaseMode {
-	case enums.REBASE_MODE_MERGING:
-		return self.getNormalRebasingCommits()
-	case enums.REBASE_MODE_INTERACTIVE:
-		return self.getInteractiveRebasingCommits()
-	default:
-		return nil, nil
-	}
-}
-
-func (self *CommitLoader) getNormalRebasingCommits() ([]*models.Commit, error) {
-	rewrittenCount := 0
-	bytesContent, err := self.readFile(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-apply/rewritten"))
-	if err == nil {
-		content := string(bytesContent)
-		rewrittenCount = len(strings.Split(content, "\n"))
-	}
-
-	// we know we're rebasing, so lets get all the files whose names have numbers
-	commits := []*models.Commit{}
-	err = self.walkFiles(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-apply"), func(path string, f os.FileInfo, err error) error {
-		if rewrittenCount > 0 {
-			rewrittenCount--
-			return nil
-		}
-		if err != nil {
-			return err
-		}
-		re := regexp.MustCompile(`^\d+$`)
-		if !re.MatchString(f.Name()) {
-			return nil
-		}
-		bytesContent, err := self.readFile(path)
-		if err != nil {
-			return err
-		}
-		content := string(bytesContent)
-		commit := self.commitFromPatch(content)
-		commits = append([]*models.Commit{commit}, commits...)
-		return nil
-	})
-	if err != nil {
-		return nil, err
-	}
-
-	return commits, nil
-}
 
 // git-rebase-todo example:
 // pick ac446ae94ee560bdb8d1d057278657b251aaef17 ac446ae
 // pick afb893148791a2fbd8091aeb81deba4930c73031 afb8931
+func (self *CommitLoader) getRebasingCommits(rebaseMode enums.RebaseMode) []*models.Commit {
+	if rebaseMode != enums.REBASE_MODE_INTERACTIVE {
+		return nil
+	}
 
-// git-rebase-todo.backup example:
-// pick 49cbba374296938ea86bbd4bf4fee2f6ba5cccf6 third commit on master
-// pick ac446ae94ee560bdb8d1d057278657b251aaef17 blah  commit on master
-// pick afb893148791a2fbd8091aeb81deba4930c73031 fourth commit on master
-
-// getInteractiveRebasingCommits takes our git-rebase-todo and our git-rebase-todo.backup files
-// and extracts out the sha and names of commits that we still have to go
-// in the rebase:
-func (self *CommitLoader) getInteractiveRebasingCommits() ([]*models.Commit, error) {
 	bytesContent, err := self.readFile(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge/git-rebase-todo"))
 	if err != nil {
 		self.Log.Error(fmt.Sprintf("error occurred reading git-rebase-todo: %s", err.Error()))
 		// we assume an error means the file doesn't exist so we just return
-		return nil, nil
+		return nil
 	}
 
 	commits := []*models.Commit{}
@@ -357,14 +332,14 @@ func (self *CommitLoader) getInteractiveRebasingCommits() ([]*models.Commit, err
 	todos, err := todo.Parse(bytes.NewBuffer(bytesContent), self.config.GetCoreCommentChar())
 	if err != nil {
 		self.Log.Error(fmt.Sprintf("error occurred while parsing git-rebase-todo file: %s", err.Error()))
-		return nil, nil
+		return nil
 	}
 
 	// See if the current commit couldn't be applied because it conflicted; if
 	// so, add a fake entry for it
-	if conflictedCommitSha := self.getConflictedCommit(todos); conflictedCommitSha != "" {
+	if conflictedCommitHash := self.getConflictedCommit(todos); conflictedCommitHash != "" {
 		commits = append(commits, &models.Commit{
-			Sha:    conflictedCommitSha,
+			Hash:   conflictedCommitHash,
 			Name:   "",
 			Status: models.StatusRebasing,
 			Action: models.ActionConflict,
@@ -373,20 +348,20 @@ func (self *CommitLoader) getInteractiveRebasingCommits() ([]*models.Commit, err
 
 	for _, t := range todos {
 		if t.Command == todo.UpdateRef {
-			t.Msg = strings.TrimPrefix(t.Ref, "refs/heads/")
+			t.Msg = t.Ref
 		} else if t.Commit == "" {
 			// Command does not have a commit associated, skip
 			continue
 		}
 		commits = utils.Prepend(commits, &models.Commit{
-			Sha:    t.Commit,
+			Hash:   t.Commit,
 			Name:   t.Msg,
 			Status: models.StatusRebasing,
 			Action: t.Command,
 		})
 	}
 
-	return commits, nil
+	return commits
 }
 
 func (self *CommitLoader) getConflictedCommit(todos []todo.Todo) string {
@@ -476,27 +451,15 @@ func (self *CommitLoader) getConflictedCommitImpl(todos []todo.Todo, doneTodos [
 	return lastTodo.Commit
 }
 
-// assuming the file starts like this:
-// From e93d4193e6dd45ca9cf3a5a273d7ba6cd8b8fb20 Mon Sep 17 00:00:00 2001
-// From: Lazygit Tester <test@example.com>
-// Date: Wed, 5 Dec 2018 21:03:23 +1100
-// Subject: second commit on master
-func (self *CommitLoader) commitFromPatch(content string) *models.Commit {
-	lines := strings.Split(content, "\n")
-	sha := strings.Split(lines[0], " ")[1]
-	name := strings.TrimPrefix(lines[3], "Subject: ")
-	return &models.Commit{
-		Sha:    sha,
-		Name:   name,
-		Status: models.StatusRebasing,
+func setCommitMergedStatuses(ancestor string, commits []*models.Commit) {
+	if ancestor == "" {
+		return
 	}
-}
 
-func setCommitMergedStatuses(ancestor string, commits []*models.Commit) []*models.Commit {
 	passedAncestor := false
 	for i, commit := range commits {
-		// some commits aren't really commits and don't have sha's, such as the update-ref todo
-		if commit.Sha != "" && strings.HasPrefix(ancestor, commit.Sha) {
+		// some commits aren't really commits and don't have hashes, such as the update-ref todo
+		if commit.Hash != "" && strings.HasPrefix(ancestor, commit.Hash) {
 			passedAncestor = true
 		}
 		if commit.Status != models.StatusPushed && commit.Status != models.StatusUnpushed {
@@ -506,7 +469,6 @@ func setCommitMergedStatuses(ancestor string, commits []*models.Commit) []*model
 			commits[i].Status = models.StatusMerged
 		}
 	}
-	return commits
 }
 
 func (self *CommitLoader) getMergeBase(refName string) string {
@@ -597,7 +559,7 @@ func ignoringWarnings(commandOutput string) string {
 	return lastLine
 }
 
-// getFirstPushedCommit returns the first commit SHA which has been pushed to the ref's upstream.
+// getFirstPushedCommit returns the first commit hash which has been pushed to the ref's upstream.
 // all commits above this are deemed unpushed and marked as such.
 func (self *CommitLoader) getFirstPushedCommit(refName string) (string, error) {
 	output, err := self.cmd.New(
@@ -617,18 +579,25 @@ func (self *CommitLoader) getFirstPushedCommit(refName string) (string, error) {
 
 // getLog gets the git log.
 func (self *CommitLoader) getLogCmd(opts GetCommitsOptions) oscommands.ICmdObj {
-	config := self.UserConfig.Git.Log
+	gitLogOrder := self.AppState.GitLogOrder
+
+	refSpec := opts.RefName
+	if opts.RefToShowDivergenceFrom != "" {
+		refSpec += "..." + opts.RefToShowDivergenceFrom
+	}
 
 	cmdArgs := NewGitCmd("log").
-		Arg(opts.RefName).
-		ArgIf(config.Order != "default", "--"+config.Order).
+		Arg(refSpec).
+		ArgIf(gitLogOrder != "default", "--"+gitLogOrder).
 		ArgIf(opts.All, "--all").
 		Arg("--oneline").
 		Arg(prettyFormat).
 		Arg("--abbrev=40").
+		ArgIf(opts.FilterAuthor != "", "--author="+opts.FilterAuthor).
 		ArgIf(opts.Limit, "-300").
 		ArgIf(opts.FilterPath != "", "--follow").
 		Arg("--no-show-signature").
+		ArgIf(opts.RefToShowDivergenceFrom != "", "--left-right").
 		Arg("--").
 		ArgIf(opts.FilterPath != "", opts.FilterPath).
 		ToArgv()
@@ -636,4 +605,4 @@ func (self *CommitLoader) getLogCmd(opts GetCommitsOptions) oscommands.ICmdObj {
 	return self.cmd.New(cmdArgs).DontLog()
 }
 
-const prettyFormat = `--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s`
+const prettyFormat = `--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m`

pkg/commands/git_commands/commit_loader_test.go

@@ -5,12 +5,13 @@ import (
 	"strings"
 	"testing"
 
-	"github.com/fsmiamoto/git-todo-parser/todo"
 	"github.com/go-errors/errors"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
 	"github.com/jesseduffield/lazygit/pkg/commands/oscommands"
 	"github.com/jesseduffield/lazygit/pkg/commands/types/enums"
+	"github.com/jesseduffield/lazygit/pkg/config"
 	"github.com/jesseduffield/lazygit/pkg/utils"
+	"github.com/stefanhaller/git-todo-parser/todo"
 	"github.com/stretchr/testify/assert"
 )
 
@@ -42,10 +43,10 @@ func TestGetCommits(t *testing.T) {
 			testName:   "should return no commits if there are none",
 			logOrder:   "topo-order",
 			rebaseMode: enums.REBASE_MODE_NONE,
-			opts:       GetCommitsOptions{RefName: "HEAD", IncludeRebaseCommits: false},
+			opts:       GetCommitsOptions{RefName: "HEAD", RefForPushedStatus: "mybranch", IncludeRebaseCommits: false},
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"merge-base", "HEAD", "HEAD@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
-				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s", "--abbrev=40", "--no-show-signature", "--"}, "", nil),
+				ExpectGitArgs([]string{"merge-base", "mybranch", "mybranch@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
+				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m", "--abbrev=40", "--no-show-signature", "--"}, "", nil),
 
 			expectedCommits: []*models.Commit{},
 			expectedError:   nil,
@@ -54,10 +55,10 @@ func TestGetCommits(t *testing.T) {
 			testName:   "should use proper upstream name for branch",
 			logOrder:   "topo-order",
 			rebaseMode: enums.REBASE_MODE_NONE,
-			opts:       GetCommitsOptions{RefName: "refs/heads/mybranch", IncludeRebaseCommits: false},
+			opts:       GetCommitsOptions{RefName: "refs/heads/mybranch", RefForPushedStatus: "refs/heads/mybranch", IncludeRebaseCommits: false},
 			runner: oscommands.NewFakeRunner(t).
 				ExpectGitArgs([]string{"merge-base", "refs/heads/mybranch", "mybranch@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
-				ExpectGitArgs([]string{"log", "refs/heads/mybranch", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s", "--abbrev=40", "--no-show-signature", "--"}, "", nil),
+				ExpectGitArgs([]string{"log", "refs/heads/mybranch", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m", "--abbrev=40", "--no-show-signature", "--"}, "", nil),
 
 			expectedCommits: []*models.Commit{},
 			expectedError:   nil,
@@ -66,13 +67,13 @@ func TestGetCommits(t *testing.T) {
 			testName:     "should return commits if they are present",
 			logOrder:     "topo-order",
 			rebaseMode:   enums.REBASE_MODE_NONE,
-			opts:         GetCommitsOptions{RefName: "HEAD", IncludeRebaseCommits: false},
+			opts:         GetCommitsOptions{RefName: "HEAD", RefForPushedStatus: "mybranch", IncludeRebaseCommits: false},
 			mainBranches: []string{"master", "main", "develop"},
 			runner: oscommands.NewFakeRunner(t).
 				// here it's seeing which commits are yet to be pushed
-				ExpectGitArgs([]string{"merge-base", "HEAD", "HEAD@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
+				ExpectGitArgs([]string{"merge-base", "mybranch", "mybranch@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
 				// here it's actually getting all the commits in a formatted form, one per line
-				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s", "--abbrev=40", "--no-show-signature", "--"}, commitsOutput, nil).
+				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m", "--abbrev=40", "--no-show-signature", "--"}, commitsOutput, nil).
 				// here it's testing which of the configured main branches have an upstream
 				ExpectGitArgs([]string{"rev-parse", "--symbolic-full-name", "master@{u}"}, "refs/remotes/origin/master", nil).       // this one does
 				ExpectGitArgs([]string{"rev-parse", "--symbolic-full-name", "main@{u}"}, "", errors.New("error")).                   // this one doesn't, so it checks origin instead
@@ -85,7 +86,7 @@ func TestGetCommits(t *testing.T) {
 
 			expectedCommits: []*models.Commit{
 				{
-					Sha:           "0eea75e8c631fba6b58135697835d58ba4c18dbc",
+					Hash:          "0eea75e8c631fba6b58135697835d58ba4c18dbc",
 					Name:          "better typing for rebase mode",
 					Status:        models.StatusUnpushed,
 					Action:        models.ActionNone,
@@ -99,7 +100,7 @@ func TestGetCommits(t *testing.T) {
 					},
 				},
 				{
-					Sha:           "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164",
+					Hash:          "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164",
 					Name:          "fix logging",
 					Status:        models.StatusPushed,
 					Action:        models.ActionNone,
@@ -113,7 +114,7 @@ func TestGetCommits(t *testing.T) {
 					},
 				},
 				{
-					Sha:           "e94e8fc5b6fab4cb755f29f1bdb3ee5e001df35c",
+					Hash:          "e94e8fc5b6fab4cb755f29f1bdb3ee5e001df35c",
 					Name:          "refactor",
 					Status:        models.StatusPushed,
 					Action:        models.ActionNone,
@@ -127,7 +128,7 @@ func TestGetCommits(t *testing.T) {
 					},
 				},
 				{
-					Sha:           "d8084cd558925eb7c9c38afeed5725c21653ab90",
+					Hash:          "d8084cd558925eb7c9c38afeed5725c21653ab90",
 					Name:          "WIP",
 					Status:        models.StatusPushed,
 					Action:        models.ActionNone,
@@ -141,7 +142,7 @@ func TestGetCommits(t *testing.T) {
 					},
 				},
 				{
-					Sha:           "65f910ebd85283b5cce9bf67d03d3f1a9ea3813a",
+					Hash:          "65f910ebd85283b5cce9bf67d03d3f1a9ea3813a",
 					Name:          "WIP",
 					Status:        models.StatusPushed,
 					Action:        models.ActionNone,
@@ -155,7 +156,7 @@ func TestGetCommits(t *testing.T) {
 					},
 				},
 				{
-					Sha:           "26c07b1ab33860a1a7591a0638f9925ccf497ffa",
+					Hash:          "26c07b1ab33860a1a7591a0638f9925ccf497ffa",
 					Name:          "WIP",
 					Status:        models.StatusMerged,
 					Action:        models.ActionNone,
@@ -169,7 +170,7 @@ func TestGetCommits(t *testing.T) {
 					},
 				},
 				{
-					Sha:           "3d4470a6c072208722e5ae9a54bcb9634959a1c5",
+					Hash:          "3d4470a6c072208722e5ae9a54bcb9634959a1c5",
 					Name:          "WIP",
 					Status:        models.StatusMerged,
 					Action:        models.ActionNone,
@@ -183,7 +184,7 @@ func TestGetCommits(t *testing.T) {
 					},
 				},
 				{
-					Sha:           "053a66a7be3da43aacdc7aa78e1fe757b82c4dd2",
+					Hash:          "053a66a7be3da43aacdc7aa78e1fe757b82c4dd2",
 					Name:          "refactoring the config struct",
 					Status:        models.StatusMerged,
 					Action:        models.ActionNone,
@@ -203,13 +204,13 @@ func TestGetCommits(t *testing.T) {
 			testName:     "should not call merge-base for mainBranches if none exist",
 			logOrder:     "topo-order",
 			rebaseMode:   enums.REBASE_MODE_NONE,
-			opts:         GetCommitsOptions{RefName: "HEAD", IncludeRebaseCommits: false},
+			opts:         GetCommitsOptions{RefName: "HEAD", RefForPushedStatus: "mybranch", IncludeRebaseCommits: false},
 			mainBranches: []string{"master", "main"},
 			runner: oscommands.NewFakeRunner(t).
 				// here it's seeing which commits are yet to be pushed
-				ExpectGitArgs([]string{"merge-base", "HEAD", "HEAD@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
+				ExpectGitArgs([]string{"merge-base", "mybranch", "mybranch@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
 				// here it's actually getting all the commits in a formatted form, one per line
-				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s", "--abbrev=40", "--no-show-signature", "--"}, singleCommitOutput, nil).
+				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m", "--abbrev=40", "--no-show-signature", "--"}, singleCommitOutput, nil).
 				// here it's testing which of the configured main branches exist; neither does
 				ExpectGitArgs([]string{"rev-parse", "--symbolic-full-name", "master@{u}"}, "", errors.New("error")).
 				ExpectGitArgs([]string{"rev-parse", "--verify", "--quiet", "refs/remotes/origin/master"}, "", errors.New("error")).
@@ -220,7 +221,7 @@ func TestGetCommits(t *testing.T) {
 
 			expectedCommits: []*models.Commit{
 				{
-					Sha:           "0eea75e8c631fba6b58135697835d58ba4c18dbc",
+					Hash:          "0eea75e8c631fba6b58135697835d58ba4c18dbc",
 					Name:          "better typing for rebase mode",
 					Status:        models.StatusUnpushed,
 					Action:        models.ActionNone,
@@ -240,13 +241,13 @@ func TestGetCommits(t *testing.T) {
 			testName:     "should call merge-base for all main branches that exist",
 			logOrder:     "topo-order",
 			rebaseMode:   enums.REBASE_MODE_NONE,
-			opts:         GetCommitsOptions{RefName: "HEAD", IncludeRebaseCommits: false},
+			opts:         GetCommitsOptions{RefName: "HEAD", RefForPushedStatus: "mybranch", IncludeRebaseCommits: false},
 			mainBranches: []string{"master", "main", "develop", "1.0-hotfixes"},
 			runner: oscommands.NewFakeRunner(t).
 				// here it's seeing which commits are yet to be pushed
-				ExpectGitArgs([]string{"merge-base", "HEAD", "HEAD@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
+				ExpectGitArgs([]string{"merge-base", "mybranch", "mybranch@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
 				// here it's actually getting all the commits in a formatted form, one per line
-				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s", "--abbrev=40", "--no-show-signature", "--"}, singleCommitOutput, nil).
+				ExpectGitArgs([]string{"log", "HEAD", "--topo-order", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m", "--abbrev=40", "--no-show-signature", "--"}, singleCommitOutput, nil).
 				// here it's testing which of the configured main branches exist
 				ExpectGitArgs([]string{"rev-parse", "--symbolic-full-name", "master@{u}"}, "refs/remotes/origin/master", nil).
 				ExpectGitArgs([]string{"rev-parse", "--symbolic-full-name", "main@{u}"}, "", errors.New("error")).
@@ -259,7 +260,7 @@ func TestGetCommits(t *testing.T) {
 
 			expectedCommits: []*models.Commit{
 				{
-					Sha:           "0eea75e8c631fba6b58135697835d58ba4c18dbc",
+					Hash:          "0eea75e8c631fba6b58135697835d58ba4c18dbc",
 					Name:          "better typing for rebase mode",
 					Status:        models.StatusUnpushed,
 					Action:        models.ActionNone,
@@ -279,10 +280,10 @@ func TestGetCommits(t *testing.T) {
 			testName:   "should not specify order if `log.order` is `default`",
 			logOrder:   "default",
 			rebaseMode: enums.REBASE_MODE_NONE,
-			opts:       GetCommitsOptions{RefName: "HEAD", IncludeRebaseCommits: false},
+			opts:       GetCommitsOptions{RefName: "HEAD", RefForPushedStatus: "mybranch", IncludeRebaseCommits: false},
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"merge-base", "HEAD", "HEAD@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
-				ExpectGitArgs([]string{"log", "HEAD", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s", "--abbrev=40", "--no-show-signature", "--"}, "", nil),
+				ExpectGitArgs([]string{"merge-base", "mybranch", "mybranch@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
+				ExpectGitArgs([]string{"log", "HEAD", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m", "--abbrev=40", "--no-show-signature", "--"}, "", nil),
 
 			expectedCommits: []*models.Commit{},
 			expectedError:   nil,
@@ -291,10 +292,10 @@ func TestGetCommits(t *testing.T) {
 			testName:   "should set filter path",
 			logOrder:   "default",
 			rebaseMode: enums.REBASE_MODE_NONE,
-			opts:       GetCommitsOptions{RefName: "HEAD", FilterPath: "src"},
+			opts:       GetCommitsOptions{RefName: "HEAD", RefForPushedStatus: "mybranch", FilterPath: "src"},
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"merge-base", "HEAD", "HEAD@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
-				ExpectGitArgs([]string{"log", "HEAD", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s", "--abbrev=40", "--follow", "--no-show-signature", "--", "src"}, "", nil),
+				ExpectGitArgs([]string{"merge-base", "mybranch", "mybranch@{u}"}, "b21997d6b4cbdf84b149d8e6a2c4d06a8e9ec164", nil).
+				ExpectGitArgs([]string{"log", "HEAD", "--oneline", "--pretty=format:%H%x00%at%x00%aN%x00%ae%x00%D%x00%p%x00%s%x00%m", "--abbrev=40", "--follow", "--no-show-signature", "--", "src"}, "", nil),
 
 			expectedCommits: []*models.Commit{},
 			expectedError:   nil,
@@ -305,7 +306,8 @@ func TestGetCommits(t *testing.T) {
 		scenario := scenario
 		t.Run(scenario.testName, func(t *testing.T) {
 			common := utils.NewDummyCommon()
-			common.UserConfig.Git.Log.Order = scenario.logOrder
+			common.AppState = &config.AppState{}
+			common.AppState.GitLogOrder = scenario.logOrder
 
 			builder := &CommitLoader{
 				Common:        common,
@@ -337,14 +339,14 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 		todos           []todo.Todo
 		doneTodos       []todo.Todo
 		amendFileExists bool
-		expectedSha     string
+		expectedHash    string
 	}{
 		{
 			testName:        "no done todos",
 			todos:           []todo.Todo{},
 			doneTodos:       []todo.Todo{},
 			amendFileExists: false,
-			expectedSha:     "",
+			expectedHash:    "",
 		},
 		{
 			testName: "common case (conflict)",
@@ -360,7 +362,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			},
 			amendFileExists: false,
-			expectedSha:     "fa1afe1",
+			expectedHash:    "fa1afe1",
 		},
 		{
 			testName: "last command was 'break'",
@@ -369,7 +371,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				{Command: todo.Break},
 			},
 			amendFileExists: false,
-			expectedSha:     "",
+			expectedHash:    "",
 		},
 		{
 			testName: "last command was 'exec'",
@@ -381,7 +383,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			},
 			amendFileExists: false,
-			expectedSha:     "",
+			expectedHash:    "",
 		},
 		{
 			testName: "last command was 'reword'",
@@ -390,7 +392,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				{Command: todo.Reword},
 			},
 			amendFileExists: false,
-			expectedSha:     "",
+			expectedHash:    "",
 		},
 		{
 			testName: "'pick' was rescheduled",
@@ -407,7 +409,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			},
 			amendFileExists: false,
-			expectedSha:     "",
+			expectedHash:    "",
 		},
 		{
 			testName: "'pick' was rescheduled, buggy git version",
@@ -432,7 +434,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			},
 			amendFileExists: false,
-			expectedSha:     "",
+			expectedHash:    "",
 		},
 		{
 			testName: "conflicting 'pick' after 'exec'",
@@ -457,7 +459,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			},
 			amendFileExists: false,
-			expectedSha:     "fa1afe1",
+			expectedHash:    "fa1afe1",
 		},
 		{
 			testName: "'edit' with amend file",
@@ -469,7 +471,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			},
 			amendFileExists: true,
-			expectedSha:     "",
+			expectedHash:    "",
 		},
 		{
 			testName: "'edit' without amend file",
@@ -481,7 +483,7 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			},
 			amendFileExists: false,
-			expectedSha:     "fa1afe1",
+			expectedHash:    "fa1afe1",
 		},
 	}
 	for _, scenario := range scenarios {
@@ -501,8 +503,8 @@ func TestCommitLoader_getConflictedCommitImpl(t *testing.T) {
 				},
 			}
 
-			sha := builder.getConflictedCommitImpl(scenario.todos, scenario.doneTodos, scenario.amendFileExists)
-			assert.Equal(t, scenario.expectedSha, sha)
+			hash := builder.getConflictedCommitImpl(scenario.todos, scenario.doneTodos, scenario.amendFileExists)
+			assert.Equal(t, scenario.expectedHash, hash)
 		})
 	}
 }
@@ -519,36 +521,37 @@ func TestCommitLoader_setCommitMergedStatuses(t *testing.T) {
 		{
 			testName: "basic",
 			commits: []*models.Commit{
-				{Sha: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
-				{Sha: "67890", Name: "2", Action: models.ActionNone, Status: models.StatusPushed},
-				{Sha: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusPushed},
+				{Hash: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
+				{Hash: "67890", Name: "2", Action: models.ActionNone, Status: models.StatusPushed},
+				{Hash: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusPushed},
 			},
 			ancestor: "67890",
 			expectedCommits: []*models.Commit{
-				{Sha: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
-				{Sha: "67890", Name: "2", Action: models.ActionNone, Status: models.StatusMerged},
-				{Sha: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusMerged},
+				{Hash: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
+				{Hash: "67890", Name: "2", Action: models.ActionNone, Status: models.StatusMerged},
+				{Hash: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusMerged},
 			},
 		},
 		{
 			testName: "with update-ref",
 			commits: []*models.Commit{
-				{Sha: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
-				{Sha: "", Name: "", Action: todo.UpdateRef, Status: models.StatusNone},
-				{Sha: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusPushed},
+				{Hash: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
+				{Hash: "", Name: "", Action: todo.UpdateRef, Status: models.StatusNone},
+				{Hash: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusPushed},
 			},
 			ancestor: "deadbeef",
 			expectedCommits: []*models.Commit{
-				{Sha: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
-				{Sha: "", Name: "", Action: todo.UpdateRef, Status: models.StatusNone},
-				{Sha: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusPushed},
+				{Hash: "12345", Name: "1", Action: models.ActionNone, Status: models.StatusUnpushed},
+				{Hash: "", Name: "", Action: todo.UpdateRef, Status: models.StatusNone},
+				{Hash: "abcde", Name: "3", Action: models.ActionNone, Status: models.StatusPushed},
 			},
 		},
 	}
 
 	for _, scenario := range scenarios {
 		t.Run(scenario.testName, func(t *testing.T) {
-			expectedCommits := setCommitMergedStatuses(scenario.ancestor, scenario.commits)
+			expectedCommits := scenario.commits
+			setCommitMergedStatuses(scenario.ancestor, expectedCommits)
 			assert.Equal(t, scenario.expectedCommits, expectedCommits)
 		})
 	}

pkg/commands/git_commands/commit_test.go

@@ -153,7 +153,7 @@ func TestCommitCommitEditorCmdObj(t *testing.T) {
 func TestCommitCreateFixupCommit(t *testing.T) {
 	type scenario struct {
 		testName string
-		sha      string
+		hash     string
 		runner   *oscommands.FakeCmdObjRunner
 		test     func(error)
 	}
@@ -161,7 +161,7 @@ func TestCommitCreateFixupCommit(t *testing.T) {
 	scenarios := []scenario{
 		{
 			testName: "valid case",
-			sha:      "12345",
+			hash:     "12345",
 			runner: oscommands.NewFakeRunner(t).
 				ExpectGitArgs([]string{"commit", "--fixup=12345"}, "", nil),
 			test: func(err error) {
@@ -174,7 +174,58 @@ func TestCommitCreateFixupCommit(t *testing.T) {
 		s := s
 		t.Run(s.testName, func(t *testing.T) {
 			instance := buildCommitCommands(commonDeps{runner: s.runner})
-			s.test(instance.CreateFixupCommit(s.sha))
+			s.test(instance.CreateFixupCommit(s.hash))
+			s.runner.CheckForMissingCalls()
+		})
+	}
+}
+
+func TestCommitCreateAmendCommit(t *testing.T) {
+	type scenario struct {
+		testName           string
+		originalSubject    string
+		newSubject         string
+		newDescription     string
+		includeFileChanges bool
+		runner             *oscommands.FakeCmdObjRunner
+	}
+
+	scenarios := []scenario{
+		{
+			testName:           "subject only",
+			originalSubject:    "original subject",
+			newSubject:         "new subject",
+			newDescription:     "",
+			includeFileChanges: true,
+			runner: oscommands.NewFakeRunner(t).
+				ExpectGitArgs([]string{"commit", "-m", "amend! original subject", "-m", "new subject"}, "", nil),
+		},
+		{
+			testName:           "subject and description",
+			originalSubject:    "original subject",
+			newSubject:         "new subject",
+			newDescription:     "new description",
+			includeFileChanges: true,
+			runner: oscommands.NewFakeRunner(t).
+				ExpectGitArgs([]string{"commit", "-m", "amend! original subject", "-m", "new subject\n\nnew description"}, "", nil),
+		},
+		{
+			testName:           "without file changes",
+			originalSubject:    "original subject",
+			newSubject:         "new subject",
+			newDescription:     "",
+			includeFileChanges: false,
+			runner: oscommands.NewFakeRunner(t).
+				ExpectGitArgs([]string{"commit", "-m", "amend! original subject", "-m", "new subject", "--only", "--allow-empty"}, "", nil),
+		},
+	}
+
+	for _, s := range scenarios {
+		s := s
+		t.Run(s.testName, func(t *testing.T) {
+			instance := buildCommitCommands(commonDeps{runner: s.runner})
+			err := instance.CreateAmendCommit(s.originalSubject, s.newSubject, s.newDescription, s.includeFileChanges)
+			assert.NoError(t, err)
 			s.runner.CheckForMissingCalls()
 		})
 	}
@@ -186,6 +237,7 @@ func TestCommitShowCmdObj(t *testing.T) {
 		filterPath       string
 		contextSize      int
 		ignoreWhitespace bool
+		extDiffCmd       string
 		expected         []string
 	}
 
@@ -195,28 +247,40 @@ func TestCommitShowCmdObj(t *testing.T) {
 			filterPath:       "",
 			contextSize:      3,
 			ignoreWhitespace: false,
-			expected:         []string{"show", "--submodule", "--color=always", "--unified=3", "--stat", "--decorate", "-p", "1234567890"},
+			extDiffCmd:       "",
+			expected:         []string{"-C", "/path/to/worktree", "-c", "diff.noprefix=false", "show", "--no-ext-diff", "--submodule", "--color=always", "--unified=3", "--stat", "--decorate", "-p", "1234567890"},
 		},
 		{
 			testName:         "Default case with filter path",
 			filterPath:       "file.txt",
 			contextSize:      3,
 			ignoreWhitespace: false,
-			expected:         []string{"show", "--submodule", "--color=always", "--unified=3", "--stat", "--decorate", "-p", "1234567890", "--", "file.txt"},
+			extDiffCmd:       "",
+			expected:         []string{"-C", "/path/to/worktree", "-c", "diff.noprefix=false", "show", "--no-ext-diff", "--submodule", "--color=always", "--unified=3", "--stat", "--decorate", "-p", "1234567890", "--", "file.txt"},
 		},
 		{
 			testName:         "Show diff with custom context size",
 			filterPath:       "",
 			contextSize:      77,
 			ignoreWhitespace: false,
-			expected:         []string{"show", "--submodule", "--color=always", "--unified=77", "--stat", "--decorate", "-p", "1234567890"},
+			extDiffCmd:       "",
+			expected:         []string{"-C", "/path/to/worktree", "-c", "diff.noprefix=false", "show", "--no-ext-diff", "--submodule", "--color=always", "--unified=77", "--stat", "--decorate", "-p", "1234567890"},
 		},
 		{
 			testName:         "Show diff, ignoring whitespace",
 			filterPath:       "",
 			contextSize:      77,
 			ignoreWhitespace: true,
-			expected:         []string{"show", "--submodule", "--color=always", "--unified=77", "--stat", "--decorate", "-p", "1234567890", "--ignore-all-space"},
+			extDiffCmd:       "",
+			expected:         []string{"-C", "/path/to/worktree", "-c", "diff.noprefix=false", "show", "--no-ext-diff", "--submodule", "--color=always", "--unified=77", "--stat", "--decorate", "-p", "1234567890", "--ignore-all-space"},
+		},
+		{
+			testName:         "Show diff with external diff command",
+			filterPath:       "",
+			contextSize:      3,
+			ignoreWhitespace: false,
+			extDiffCmd:       "difft --color=always",
+			expected:         []string{"-C", "/path/to/worktree", "-c", "diff.external=difft --color=always", "-c", "diff.noprefix=false", "show", "--ext-diff", "--submodule", "--color=always", "--unified=3", "--stat", "--decorate", "-p", "1234567890"},
 		},
 	}
 
@@ -224,12 +288,18 @@ func TestCommitShowCmdObj(t *testing.T) {
 		s := s
 		t.Run(s.testName, func(t *testing.T) {
 			userConfig := config.GetDefaultConfig()
-			userConfig.Git.DiffContextSize = s.contextSize
+			userConfig.Git.Paging.ExternalDiffCommand = s.extDiffCmd
+			appState := &config.AppState{}
+			appState.IgnoreWhitespaceInDiffView = s.ignoreWhitespace
+			appState.DiffContextSize = s.contextSize
 
 			runner := oscommands.NewFakeRunner(t).ExpectGitArgs(s.expected, "", nil)
-			instance := buildCommitCommands(commonDeps{userConfig: userConfig, runner: runner})
+			repoPaths := RepoPaths{
+				worktreePath: "/path/to/worktree",
+			}
+			instance := buildCommitCommands(commonDeps{userConfig: userConfig, appState: appState, runner: runner, repoPaths: &repoPaths})
 
-			assert.NoError(t, instance.ShowCmdObj("1234567890", s.filterPath, s.ignoreWhitespace).Run())
+			assert.NoError(t, instance.ShowCmdObj("1234567890", s.filterPath).Run())
 			runner.CheckForMissingCalls()
 		})
 	}
@@ -244,19 +314,17 @@ func TestGetCommitMsg(t *testing.T) {
 	scenarios := []scenario{
 		{
 			"empty",
-			` commit deadbeef`,
+			``,
 			``,
 		},
 		{
 			"no line breaks (single line)",
-			`commit deadbeef
-use generics to DRY up context code`,
+			`use generics to DRY up context code`,
 			`use generics to DRY up context code`,
 		},
 		{
 			"with line breaks",
-			`commit deadbeef
-Merge pull request #1750 from mark2185/fix-issue-template
+			`Merge pull request #1750 from mark2185/fix-issue-template
 
 'git-rev parse' should be 'git rev-parse'`,
 			`Merge pull request #1750 from mark2185/fix-issue-template
@@ -269,7 +337,7 @@ Merge pull request #1750 from mark2185/fix-issue-template
 		s := s
 		t.Run(s.testName, func(t *testing.T) {
 			instance := buildCommitCommands(commonDeps{
-				runner: oscommands.NewFakeRunner(t).ExpectGitArgs([]string{"rev-list", "--format=%B", "--max-count=1", "deadbeef"}, s.input, nil),
+				runner: oscommands.NewFakeRunner(t).ExpectGitArgs([]string{"-c", "log.showsignature=false", "log", "--format=%B", "--max-count=1", "deadbeef"}, s.input, nil),
 			})
 
 			output, err := instance.GetCommitMessage("deadbeef")
@@ -290,15 +358,14 @@ func TestGetCommitMessageFromHistory(t *testing.T) {
 	scenarios := []scenario{
 		{
 			"Empty message",
-			oscommands.NewFakeRunner(t).ExpectGitArgs([]string{"log", "-1", "--skip=2", "--pretty=%H"}, "", nil).ExpectGitArgs([]string{"rev-list", "--format=%B", "--max-count=1"}, "", nil),
+			oscommands.NewFakeRunner(t).ExpectGitArgs([]string{"log", "-1", "--skip=2", "--pretty=%H"}, "", nil).ExpectGitArgs([]string{"-c", "log.showsignature=false", "log", "--format=%B", "--max-count=1"}, "", nil),
 			func(output string, err error) {
 				assert.Error(t, err)
 			},
 		},
 		{
 			"Default case to retrieve a commit in history",
-			oscommands.NewFakeRunner(t).ExpectGitArgs([]string{"log", "-1", "--skip=2", "--pretty=%H"}, "sha3 \n", nil).ExpectGitArgs([]string{"rev-list", "--format=%B", "--max-count=1", "sha3"}, `commit sha3
-				use generics to DRY up context code`, nil),
+			oscommands.NewFakeRunner(t).ExpectGitArgs([]string{"log", "-1", "--skip=2", "--pretty=%H"}, "hash3 \n", nil).ExpectGitArgs([]string{"-c", "log.showsignature=false", "log", "--format=%B", "--max-count=1", "hash3"}, `use generics to DRY up context code`, nil),
 			func(output string, err error) {
 				assert.NoError(t, err)
 				assert.Equal(t, "use generics to DRY up context code", output)
@@ -317,3 +384,70 @@ func TestGetCommitMessageFromHistory(t *testing.T) {
 		})
 	}
 }
+
+func TestAddCoAuthorToMessage(t *testing.T) {
+	scenarios := []struct {
+		name           string
+		message        string
+		expectedResult string
+	}{
+		{
+			// This never happens, I think it isn't possible to create a commit
+			// with an empty message. Just including it for completeness.
+			name:           "Empty message",
+			message:        "",
+			expectedResult: "\n\nCo-authored-by: John Doe <john@doe.com>",
+		},
+		{
+			name:           "Just a subject, no body",
+			message:        "Subject",
+			expectedResult: "Subject\n\nCo-authored-by: John Doe <john@doe.com>",
+		},
+		{
+			name:           "Subject and body",
+			message:        "Subject\n\nBody",
+			expectedResult: "Subject\n\nBody\n\nCo-authored-by: John Doe <john@doe.com>",
+		},
+		{
+			name:           "Body already ending with a Co-authored-by line",
+			message:        "Subject\n\nBody\n\nCo-authored-by: Jane Smith <jane@smith.com>",
+			expectedResult: "Subject\n\nBody\n\nCo-authored-by: Jane Smith <jane@smith.com>\nCo-authored-by: John Doe <john@doe.com>",
+		},
+	}
+	for _, s := range scenarios {
+		t.Run(s.name, func(t *testing.T) {
+			result := AddCoAuthorToMessage(s.message, "John Doe <john@doe.com>")
+			assert.Equal(t, s.expectedResult, result)
+		})
+	}
+}
+
+func TestAddCoAuthorToDescription(t *testing.T) {
+	scenarios := []struct {
+		name           string
+		description    string
+		expectedResult string
+	}{
+		{
+			name:           "Empty description",
+			description:    "",
+			expectedResult: "Co-authored-by: John Doe <john@doe.com>",
+		},
+		{
+			name:           "Non-empty description",
+			description:    "Body",
+			expectedResult: "Body\n\nCo-authored-by: John Doe <john@doe.com>",
+		},
+		{
+			name:           "Description already ending with a Co-authored-by line",
+			description:    "Body\n\nCo-authored-by: Jane Smith <jane@smith.com>",
+			expectedResult: "Body\n\nCo-authored-by: Jane Smith <jane@smith.com>\nCo-authored-by: John Doe <john@doe.com>",
+		},
+	}
+	for _, s := range scenarios {
+		t.Run(s.name, func(t *testing.T) {
+			result := AddCoAuthorToDescription(s.description, "John Doe <john@doe.com>")
+			assert.Equal(t, s.expectedResult, result)
+		})
+	}
+}

pkg/commands/git_commands/common.go

@@ -4,7 +4,6 @@ import (
 	gogit "github.com/jesseduffield/go-git/v5"
 	"github.com/jesseduffield/lazygit/pkg/commands/oscommands"
 	"github.com/jesseduffield/lazygit/pkg/common"
-	"github.com/sasha-s/go-deadlock"
 )
 
 type GitCommon struct {
@@ -15,8 +14,6 @@ type GitCommon struct {
 	repoPaths *RepoPaths
 	repo      *gogit.Repository
 	config    *ConfigCommands
-	// mutex for doing things like push/pull/fetch
-	syncMutex *deadlock.Mutex
 }
 
 func NewGitCommon(
@@ -27,7 +24,6 @@ func NewGitCommon(
 	repoPaths *RepoPaths,
 	repo *gogit.Repository,
 	config *ConfigCommands,
-	syncMutex *deadlock.Mutex,
 ) *GitCommon {
 	return &GitCommon{
 		Common:    cmn,
@@ -37,6 +33,5 @@ func NewGitCommon(
 		repoPaths: repoPaths,
 		repo:      repo,
 		config:    config,
-		syncMutex: syncMutex,
 	}
 }

pkg/commands/git_commands/config.go

@@ -53,7 +53,7 @@ func (self *ConfigCommands) GetPager(width int) string {
 		"columnWidth": strconv.Itoa(width/2 - 6),
 	}
 
-	pagerTemplate := self.UserConfig.Git.Paging.Pager
+	pagerTemplate := string(self.UserConfig.Git.Paging.Pager)
 	return utils.ResolvePlaceholderString(pagerTemplate, templateValues)
 }
 

pkg/commands/git_commands/deps_test.go

@@ -17,6 +17,7 @@ import (
 type commonDeps struct {
 	runner     *oscommands.FakeCmdObjRunner
 	userConfig *config.UserConfig
+	appState   *config.AppState
 	gitVersion *GitVersion
 	gitConfig  *git_config.FakeGitConfig
 	getenv     func(string) string
@@ -32,7 +33,7 @@ func buildGitCommon(deps commonDeps) *GitCommon {
 
 	gitCommon.Common = deps.common
 	if gitCommon.Common == nil {
-		gitCommon.Common = utils.NewDummyCommonWithUserConfig(deps.userConfig)
+		gitCommon.Common = utils.NewDummyCommonWithUserConfigAndAppState(deps.userConfig, deps.appState)
 	}
 
 	if deps.fs != nil {

pkg/commands/git_commands/diff.go

@@ -14,6 +14,83 @@ func NewDiffCommands(gitCommon *GitCommon) *DiffCommands {
 
 func (self *DiffCommands) DiffCmdObj(diffArgs []string) oscommands.ICmdObj {
 	return self.cmd.New(
-		NewGitCmd("diff").Arg("--submodule", "--no-ext-diff", "--color").Arg(diffArgs...).ToArgv(),
+		NewGitCmd("diff").
+			Config("diff.noprefix=false").
+			Arg("--submodule", "--no-ext-diff", "--color").
+			Arg(diffArgs...).
+			Dir(self.repoPaths.worktreePath).
+			ToArgv(),
+	)
+}
+
+func (self *DiffCommands) internalDiffCmdObj(diffArgs ...string) *GitCommandBuilder {
+	return NewGitCmd("diff").
+		Config("diff.noprefix=false").
+		Arg("--no-ext-diff", "--no-color").
+		Arg(diffArgs...).
+		Dir(self.repoPaths.worktreePath)
+}
+
+func (self *DiffCommands) GetPathDiff(path string, staged bool) (string, error) {
+	return self.cmd.New(
+		self.internalDiffCmdObj().
+			ArgIf(staged, "--staged").
+			Arg(path).
+			ToArgv(),
+	).RunWithOutput()
+}
+
+func (self *DiffCommands) GetAllDiff(staged bool) (string, error) {
+	return self.cmd.New(
+		self.internalDiffCmdObj().
+			ArgIf(staged, "--staged").
+			ToArgv(),
+	).RunWithOutput()
+}
+
+type DiffToolCmdOptions struct {
+	// The path to show a diff for. Pass "." for the entire repo.
+	Filepath string
+
+	// The commit against which to show the diff. Leave empty to show a diff of
+	// the working copy.
+	FromCommit string
+
+	// The commit to diff against FromCommit. Leave empty to diff the working
+	// copy against FromCommit. Leave both FromCommit and ToCommit empty to show
+	// the diff of the unstaged working copy changes against the index if Staged
+	// is false, or the staged changes against HEAD if Staged is true.
+	ToCommit string
+
+	// Whether to reverse the left and right sides of the diff.
+	Reverse bool
+
+	// Whether the given Filepath is a directory. We'll pass --dir-diff to
+	// git-difftool in that case.
+	IsDirectory bool
+
+	// Whether to show the staged or the unstaged changes. Must be false if both
+	// FromCommit and ToCommit are non-empty.
+	Staged bool
+}
+
+func (self *DiffCommands) OpenDiffToolCmdObj(opts DiffToolCmdOptions) oscommands.ICmdObj {
+	return self.cmd.New(NewGitCmd("difftool").
+		Arg("--no-prompt").
+		ArgIf(opts.IsDirectory, "--dir-diff").
+		ArgIf(opts.Staged, "--cached").
+		ArgIf(opts.FromCommit != "", opts.FromCommit).
+		ArgIf(opts.ToCommit != "", opts.ToCommit).
+		ArgIf(opts.Reverse, "-R").
+		Arg("--", opts.Filepath).
+		ToArgv())
+}
+
+func (self *DiffCommands) DiffIndexCmdObj(diffArgs ...string) oscommands.ICmdObj {
+	return self.cmd.New(
+		NewGitCmd("diff-index").
+			Config("diff.noprefix=false").
+			Arg("--submodule", "--no-ext-diff", "--no-color", "--patch").
+			Arg(diffArgs...).ToArgv(),
 	)
 }

pkg/commands/git_commands/file.go

@@ -8,6 +8,7 @@ import (
 	"github.com/go-errors/errors"
 	"github.com/jesseduffield/lazygit/pkg/config"
 	"github.com/jesseduffield/lazygit/pkg/utils"
+	"github.com/samber/lo"
 )
 
 type FileCommands struct {
@@ -75,22 +76,25 @@ func (self *FileCommands) GetEditCmdStrLegacy(filename string, lineNumber int) (
 	return utils.ResolvePlaceholderString(editCmdTemplate, templateValues), nil
 }
 
-func (self *FileCommands) GetEditCmdStr(filename string) (string, bool) {
+func (self *FileCommands) GetEditCmdStr(filenames []string) (string, bool) {
 	// Legacy support for old config; to be removed at some point
 	if self.UserConfig.OS.Edit == "" && self.UserConfig.OS.EditCommandTemplate != "" {
-		if cmdStr, err := self.GetEditCmdStrLegacy(filename, 1); err == nil {
+		// If multiple files are selected, we'll simply edit just the first one.
+		// It's not worth fixing this for the legacy support.
+		if cmdStr, err := self.GetEditCmdStrLegacy(filenames[0], 1); err == nil {
 			return cmdStr, true
 		}
 	}
 
-	template, editInTerminal := config.GetEditTemplate(&self.UserConfig.OS, self.guessDefaultEditor)
+	template, suspend := config.GetEditTemplate(&self.UserConfig.OS, self.guessDefaultEditor)
+	quotedFilenames := lo.Map(filenames, func(filename string, _ int) string { return self.cmd.Quote(filename) })
 
 	templateValues := map[string]string{
-		"filename": self.cmd.Quote(filename),
+		"filename": strings.Join(quotedFilenames, " "),
 	}
 
 	cmdStr := utils.ResolvePlaceholderString(template, templateValues)
-	return cmdStr, editInTerminal
+	return cmdStr, suspend
 }
 
 func (self *FileCommands) GetEditAtLineCmdStr(filename string, lineNumber int) (string, bool) {
@@ -101,7 +105,7 @@ func (self *FileCommands) GetEditAtLineCmdStr(filename string, lineNumber int) (
 		}
 	}
 
-	template, editInTerminal := config.GetEditAtLineTemplate(&self.UserConfig.OS, self.guessDefaultEditor)
+	template, suspend := config.GetEditAtLineTemplate(&self.UserConfig.OS, self.guessDefaultEditor)
 
 	templateValues := map[string]string{
 		"filename": self.cmd.Quote(filename),
@@ -109,7 +113,7 @@ func (self *FileCommands) GetEditAtLineCmdStr(filename string, lineNumber int) (
 	}
 
 	cmdStr := utils.ResolvePlaceholderString(template, templateValues)
-	return cmdStr, editInTerminal
+	return cmdStr, suspend
 }
 
 func (self *FileCommands) GetEditAtLineAndWaitCmdStr(filename string, lineNumber int) string {
@@ -131,15 +135,15 @@ func (self *FileCommands) GetEditAtLineAndWaitCmdStr(filename string, lineNumber
 	return cmdStr
 }
 
-func (self *FileCommands) GetOpenDirInEditorCmdStr(path string) string {
-	template := config.GetOpenDirInEditorTemplate(&self.UserConfig.OS, self.guessDefaultEditor)
+func (self *FileCommands) GetOpenDirInEditorCmdStr(path string) (string, bool) {
+	template, suspend := config.GetOpenDirInEditorTemplate(&self.UserConfig.OS, self.guessDefaultEditor)
 
 	templateValues := map[string]string{
 		"dir": self.cmd.Quote(path),
 	}
 
 	cmdStr := utils.ResolvePlaceholderString(template, templateValues)
-	return cmdStr
+	return cmdStr, suspend
 }
 
 func (self *FileCommands) guessDefaultEditor() string {

pkg/commands/git_commands/file_test.go

@@ -177,36 +177,44 @@ func TestEditFileCmdStrLegacy(t *testing.T) {
 	}
 }
 
-func TestEditFileCmd(t *testing.T) {
+func TestEditFilesCmd(t *testing.T) {
 	type scenario struct {
-		filename               string
-		osConfig               config.OSConfig
-		expectedCmdStr         string
-		expectedEditInTerminal bool
+		filenames      []string
+		osConfig       config.OSConfig
+		expectedCmdStr string
+		suspend        bool
 	}
 
 	scenarios := []scenario{
 		{
-			filename:               "test",
-			osConfig:               config.OSConfig{},
-			expectedCmdStr:         `vim -- "test"`,
-			expectedEditInTerminal: true,
+			filenames:      []string{"test"},
+			osConfig:       config.OSConfig{},
+			expectedCmdStr: `vim -- "test"`,
+			suspend:        true,
 		},
 		{
-			filename: "test",
+			filenames: []string{"test"},
 			osConfig: config.OSConfig{
 				Edit: "nano {{filename}}",
 			},
-			expectedCmdStr:         `nano "test"`,
-			expectedEditInTerminal: true,
+			expectedCmdStr: `nano "test"`,
+			suspend:        true,
 		},
 		{
-			filename: "file/with space",
+			filenames: []string{"file/with space"},
 			osConfig: config.OSConfig{
 				EditPreset: "sublime",
 			},
-			expectedCmdStr:         `subl -- "file/with space"`,
-			expectedEditInTerminal: false,
+			expectedCmdStr: `subl -- "file/with space"`,
+			suspend:        false,
+		},
+		{
+			filenames: []string{"multiple", "files"},
+			osConfig: config.OSConfig{
+				EditPreset: "sublime",
+			},
+			expectedCmdStr: `subl -- "multiple" "files"`,
+			suspend:        false,
 		},
 	}
 
@@ -218,28 +226,28 @@ func TestEditFileCmd(t *testing.T) {
 			userConfig: userConfig,
 		})
 
-		cmdStr, editInTerminal := instance.GetEditCmdStr(s.filename)
+		cmdStr, suspend := instance.GetEditCmdStr(s.filenames)
 		assert.Equal(t, s.expectedCmdStr, cmdStr)
-		assert.Equal(t, s.expectedEditInTerminal, editInTerminal)
+		assert.Equal(t, s.suspend, suspend)
 	}
 }
 
 func TestEditFileAtLineCmd(t *testing.T) {
 	type scenario struct {
-		filename               string
-		lineNumber             int
-		osConfig               config.OSConfig
-		expectedCmdStr         string
-		expectedEditInTerminal bool
+		filename       string
+		lineNumber     int
+		osConfig       config.OSConfig
+		expectedCmdStr string
+		suspend        bool
 	}
 
 	scenarios := []scenario{
 		{
-			filename:               "test",
-			lineNumber:             42,
-			osConfig:               config.OSConfig{},
-			expectedCmdStr:         `vim +42 -- "test"`,
-			expectedEditInTerminal: true,
+			filename:       "test",
+			lineNumber:     42,
+			osConfig:       config.OSConfig{},
+			expectedCmdStr: `vim +42 -- "test"`,
+			suspend:        true,
 		},
 		{
 			filename:   "test",
@@ -247,8 +255,8 @@ func TestEditFileAtLineCmd(t *testing.T) {
 			osConfig: config.OSConfig{
 				EditAtLine: "nano +{{line}} {{filename}}",
 			},
-			expectedCmdStr:         `nano +35 "test"`,
-			expectedEditInTerminal: true,
+			expectedCmdStr: `nano +35 "test"`,
+			suspend:        true,
 		},
 		{
 			filename:   "file/with space",
@@ -256,8 +264,8 @@ func TestEditFileAtLineCmd(t *testing.T) {
 			osConfig: config.OSConfig{
 				EditPreset: "sublime",
 			},
-			expectedCmdStr:         `subl -- "file/with space":12`,
-			expectedEditInTerminal: false,
+			expectedCmdStr: `subl -- "file/with space":12`,
+			suspend:        false,
 		},
 	}
 
@@ -269,9 +277,9 @@ func TestEditFileAtLineCmd(t *testing.T) {
 			userConfig: userConfig,
 		})
 
-		cmdStr, editInTerminal := instance.GetEditAtLineCmdStr(s.filename, s.lineNumber)
+		cmdStr, suspend := instance.GetEditAtLineCmdStr(s.filename, s.lineNumber)
 		assert.Equal(t, s.expectedCmdStr, cmdStr)
-		assert.Equal(t, s.expectedEditInTerminal, editInTerminal)
+		assert.Equal(t, s.suspend, suspend)
 	}
 }
 

pkg/commands/git_commands/git_command_builder.go

@@ -44,6 +44,14 @@ func (self *GitCommandBuilder) Config(value string) *GitCommandBuilder {
 	return self
 }
 
+func (self *GitCommandBuilder) ConfigIf(condition bool, ifTrue string) *GitCommandBuilder {
+	if condition {
+		self.Config(ifTrue)
+	}
+
+	return self
+}
+
 // the -C arg will make git do a `cd` to the directory before doing anything else
 func (self *GitCommandBuilder) Dir(path string) *GitCommandBuilder {
 	// repo path comes before the command
@@ -52,6 +60,14 @@ func (self *GitCommandBuilder) Dir(path string) *GitCommandBuilder {
 	return self
 }
 
+func (self *GitCommandBuilder) DirIf(condition bool, path string) *GitCommandBuilder {
+	if condition {
+		return self.Dir(path)
+	}
+
+	return self
+}
+
 // Note, you may prefer to use the Dir method instead of this one
 func (self *GitCommandBuilder) Worktree(path string) *GitCommandBuilder {
 	// worktree arg comes before the command

pkg/commands/git_commands/patch.go

@@ -4,12 +4,12 @@ import (
 	"path/filepath"
 	"time"
 
-	"github.com/fsmiamoto/git-todo-parser/todo"
 	"github.com/go-errors/errors"
 	"github.com/jesseduffield/lazygit/pkg/app/daemon"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
 	"github.com/jesseduffield/lazygit/pkg/commands/patch"
 	"github.com/jesseduffield/lazygit/pkg/commands/types/enums"
+	"github.com/stefanhaller/git-todo-parser/todo"
 )
 
 type PatchCommands struct {
@@ -157,13 +157,13 @@ func (self *PatchCommands) MovePatchToSelectedCommit(commits []*models.Commit, s
 	baseIndex := sourceCommitIdx + 1
 
 	changes := []daemon.ChangeTodoAction{
-		{Sha: commits[sourceCommitIdx].Sha, NewAction: todo.Edit},
-		{Sha: commits[destinationCommitIdx].Sha, NewAction: todo.Edit},
+		{Hash: commits[sourceCommitIdx].Hash, NewAction: todo.Edit},
+		{Hash: commits[destinationCommitIdx].Hash, NewAction: todo.Edit},
 	}
 	self.os.LogCommand(logTodoChanges(changes), false)
 
 	err := self.rebase.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot:  commits[baseIndex].Sha,
+		baseHashOrRoot: commits[baseIndex].Hash,
 		overrideEditor: true,
 		instruction:    daemon.NewChangeTodoActionsInstruction(changes),
 	}).Run()
@@ -219,7 +219,7 @@ func (self *PatchCommands) MovePatchToSelectedCommit(commits []*models.Commit, s
 
 func (self *PatchCommands) MovePatchIntoIndex(commits []*models.Commit, commitIdx int, stash bool) error {
 	if stash {
-		if err := self.stash.Push(self.Tr.StashPrefix + commits[commitIdx].Sha); err != nil {
+		if err := self.stash.Push(self.Tr.StashPrefix + commits[commitIdx].Hash); err != nil {
 			return err
 		}
 	}
@@ -321,7 +321,11 @@ func (self *PatchCommands) PullPatchIntoNewCommit(
 // only some lines of a range of adjacent added lines. To solve this, we
 // get the diff of HEAD and the original commit and then apply that.
 func (self *PatchCommands) diffHeadAgainstCommit(commit *models.Commit) (string, error) {
-	cmdArgs := NewGitCmd("diff").Arg("HEAD.." + commit.Sha).ToArgv()
+	cmdArgs := NewGitCmd("diff").
+		Config("diff.noprefix=false").
+		Arg("--no-ext-diff").
+		Arg("HEAD.." + commit.Hash).
+		ToArgv()
 
 	return self.cmd.New(cmdArgs).RunWithOutput()
 }

pkg/commands/git_commands/rebase.go

@@ -5,13 +5,13 @@ import (
 	"path/filepath"
 	"strings"
 
-	"github.com/fsmiamoto/git-todo-parser/todo"
 	"github.com/go-errors/errors"
 	"github.com/jesseduffield/lazygit/pkg/app/daemon"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
 	"github.com/jesseduffield/lazygit/pkg/commands/oscommands"
 	"github.com/jesseduffield/lazygit/pkg/utils"
 	"github.com/samber/lo"
+	"github.com/stefanhaller/git-todo-parser/todo"
 )
 
 type RebaseCommands struct {
@@ -56,14 +56,14 @@ func (self *RebaseCommands) RewordCommit(commits []*models.Commit, index int, su
 
 func (self *RebaseCommands) RewordCommitInEditor(commits []*models.Commit, index int) (oscommands.ICmdObj, error) {
 	changes := []daemon.ChangeTodoAction{{
-		Sha:       commits[index].Sha,
+		Hash:      commits[index].Hash,
 		NewAction: todo.Reword,
 	}}
 	self.os.LogCommand(logTodoChanges(changes), false)
 
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot: getBaseShaOrRoot(commits, index+1),
-		instruction:   daemon.NewChangeTodoActionsInstruction(changes),
+		baseHashOrRoot: getBaseHashOrRoot(commits, index+1),
+		instruction:    daemon.NewChangeTodoActionsInstruction(changes),
 	}), nil
 }
 
@@ -79,6 +79,12 @@ func (self *RebaseCommands) SetCommitAuthor(commits []*models.Commit, index int,
 	})
 }
 
+func (self *RebaseCommands) AddCommitCoAuthor(commits []*models.Commit, index int, value string) error {
+	return self.GenericAmend(commits, index, func() error {
+		return self.commit.AddCoAuthor(commits[index].Hash, value)
+	})
+}
+
 func (self *RebaseCommands) GenericAmend(commits []*models.Commit, index int, f func() error) error {
 	if models.IsHeadCommit(commits, index) {
 		// we've selected the top commit so no rebase is required
@@ -99,62 +105,53 @@ func (self *RebaseCommands) GenericAmend(commits []*models.Commit, index int, f
 	return self.ContinueRebase()
 }
 
-func (self *RebaseCommands) MoveCommitDown(commits []*models.Commit, index int) error {
-	baseShaOrRoot := getBaseShaOrRoot(commits, index+2)
+func (self *RebaseCommands) MoveCommitsDown(commits []*models.Commit, startIdx int, endIdx int) error {
+	baseHashOrRoot := getBaseHashOrRoot(commits, endIdx+2)
 
-	sha := commits[index].Sha
-
-	msg := utils.ResolvePlaceholderString(
-		self.Tr.Log.MoveCommitDown,
-		map[string]string{
-			"shortSha": utils.ShortSha(sha),
-		},
-	)
-	self.os.LogCommand(msg, false)
+	hashes := lo.Map(commits[startIdx:endIdx+1], func(commit *models.Commit, _ int) string {
+		return commit.Hash
+	})
 
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot:  baseShaOrRoot,
-		instruction:    daemon.NewMoveTodoDownInstruction(sha),
+		baseHashOrRoot: baseHashOrRoot,
+		instruction:    daemon.NewMoveTodosDownInstruction(hashes),
 		overrideEditor: true,
 	}).Run()
 }
 
-func (self *RebaseCommands) MoveCommitUp(commits []*models.Commit, index int) error {
-	baseShaOrRoot := getBaseShaOrRoot(commits, index+1)
+func (self *RebaseCommands) MoveCommitsUp(commits []*models.Commit, startIdx int, endIdx int) error {
+	baseHashOrRoot := getBaseHashOrRoot(commits, endIdx+1)
 
-	sha := commits[index].Sha
-
-	msg := utils.ResolvePlaceholderString(
-		self.Tr.Log.MoveCommitUp,
-		map[string]string{
-			"shortSha": utils.ShortSha(sha),
-		},
-	)
-	self.os.LogCommand(msg, false)
+	hashes := lo.Map(commits[startIdx:endIdx+1], func(commit *models.Commit, _ int) string {
+		return commit.Hash
+	})
 
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot:  baseShaOrRoot,
-		instruction:    daemon.NewMoveTodoUpInstruction(sha),
+		baseHashOrRoot: baseHashOrRoot,
+		instruction:    daemon.NewMoveTodosUpInstruction(hashes),
 		overrideEditor: true,
 	}).Run()
 }
 
-func (self *RebaseCommands) InteractiveRebase(commits []*models.Commit, index int, action todo.TodoCommand) error {
-	baseIndex := index + 1
+func (self *RebaseCommands) InteractiveRebase(commits []*models.Commit, startIdx int, endIdx int, action todo.TodoCommand) error {
+	baseIndex := endIdx + 1
 	if action == todo.Squash || action == todo.Fixup {
 		baseIndex++
 	}
 
-	baseShaOrRoot := getBaseShaOrRoot(commits, baseIndex)
+	baseHashOrRoot := getBaseHashOrRoot(commits, baseIndex)
+
+	changes := lo.Map(commits[startIdx:endIdx+1], func(commit *models.Commit, _ int) daemon.ChangeTodoAction {
+		return daemon.ChangeTodoAction{
+			Hash:      commit.Hash,
+			NewAction: action,
+		}
+	})
 
-	changes := []daemon.ChangeTodoAction{{
-		Sha:       commits[index].Sha,
-		NewAction: action,
-	}}
 	self.os.LogCommand(logTodoChanges(changes), false)
 
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot:  baseShaOrRoot,
+		baseHashOrRoot: baseHashOrRoot,
 		overrideEditor: true,
 		instruction:    daemon.NewChangeTodoActionsInstruction(changes),
 	}).Run()
@@ -169,8 +166,8 @@ func (self *RebaseCommands) EditRebase(branchRef string) error {
 	)
 	self.os.LogCommand(msg, false)
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot: branchRef,
-		instruction:   daemon.NewInsertBreakInstruction(),
+		baseHashOrRoot: branchRef,
+		instruction:    daemon.NewInsertBreakInstruction(),
 	}).Run()
 }
 
@@ -184,21 +181,21 @@ func (self *RebaseCommands) EditRebaseFromBaseCommit(targetBranchName string, ba
 	)
 	self.os.LogCommand(msg, false)
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot: baseCommit,
-		onto:          targetBranchName,
-		instruction:   daemon.NewInsertBreakInstruction(),
+		baseHashOrRoot: baseCommit,
+		onto:           targetBranchName,
+		instruction:    daemon.NewInsertBreakInstruction(),
 	}).Run()
 }
 
 func logTodoChanges(changes []daemon.ChangeTodoAction) string {
 	changeTodoStr := strings.Join(lo.Map(changes, func(c daemon.ChangeTodoAction, _ int) string {
-		return fmt.Sprintf("%s:%s", c.Sha, c.NewAction)
+		return fmt.Sprintf("%s:%s", c.Hash, c.NewAction)
 	}), "\n")
-	return fmt.Sprintf("Changing TODO actions: %s", changeTodoStr)
+	return fmt.Sprintf("Changing TODO actions:\n%s", changeTodoStr)
 }
 
 type PrepareInteractiveRebaseCommandOpts struct {
-	baseShaOrRoot              string
+	baseHashOrRoot             string
 	onto                       string
 	instruction                daemon.Instruction
 	overrideEditor             bool
@@ -207,7 +204,7 @@ type PrepareInteractiveRebaseCommandOpts struct {
 
 // PrepareInteractiveRebaseCommand returns the cmd for an interactive rebase
 // we tell git to run lazygit to edit the todo list, and we pass the client
-// lazygit a todo string to write to the todo file
+// lazygit instructions what to do with the todo file
 func (self *RebaseCommands) PrepareInteractiveRebaseCommand(opts PrepareInteractiveRebaseCommandOpts) oscommands.ICmdObj {
 	ex := oscommands.GetLazygitPath()
 
@@ -215,11 +212,11 @@ func (self *RebaseCommands) PrepareInteractiveRebaseCommand(opts PrepareInteract
 		Arg("--interactive").
 		Arg("--autostash").
 		Arg("--keep-empty").
-		ArgIf(opts.keepCommitsThatBecomeEmpty && !self.version.IsOlderThan(2, 26, 0), "--empty=keep").
+		ArgIf(opts.keepCommitsThatBecomeEmpty && self.version.IsAtLeast(2, 26, 0), "--empty=keep").
 		Arg("--no-autosquash").
-		ArgIf(!self.version.IsOlderThan(2, 22, 0), "--rebase-merges").
+		ArgIf(self.version.IsAtLeast(2, 22, 0), "--rebase-merges").
 		ArgIf(opts.onto != "", "--onto", opts.onto).
-		Arg(opts.baseShaOrRoot).
+		Arg(opts.baseHashOrRoot).
 		ToArgv()
 
 	debug := "FALSE"
@@ -236,7 +233,7 @@ func (self *RebaseCommands) PrepareInteractiveRebaseCommand(opts PrepareInteract
 	if opts.instruction != nil {
 		cmdObj.AddEnvVars(daemon.ToEnvVars(opts.instruction)...)
 	} else {
-		gitSequenceEditor = "true"
+		cmdObj.AddEnvVars(daemon.ToEnvVars(daemon.NewRemoveUpdateRefsForCopiedBranchInstruction())...)
 	}
 
 	cmdObj.AddEnvVars(
@@ -253,55 +250,127 @@ func (self *RebaseCommands) PrepareInteractiveRebaseCommand(opts PrepareInteract
 	return cmdObj
 }
 
+// GitRebaseEditTodo runs "git rebase --edit-todo", saving the given todosFileContent to the file
+func (self *RebaseCommands) GitRebaseEditTodo(todosFileContent []byte) error {
+	ex := oscommands.GetLazygitPath()
+
+	cmdArgs := NewGitCmd("rebase").
+		Arg("--edit-todo").
+		ToArgv()
+
+	debug := "FALSE"
+	if self.Debug {
+		debug = "TRUE"
+	}
+
+	self.Log.WithField("command", cmdArgs).Debug("RunCommand")
+
+	cmdObj := self.cmd.New(cmdArgs)
+
+	cmdObj.AddEnvVars(daemon.ToEnvVars(daemon.NewWriteRebaseTodoInstruction(todosFileContent))...)
+
+	cmdObj.AddEnvVars(
+		"DEBUG="+debug,
+		"LANG=en_US.UTF-8",   // Force using EN as language
+		"LC_ALL=en_US.UTF-8", // Force using EN as language
+		"GIT_EDITOR="+ex,
+		"GIT_SEQUENCE_EDITOR="+ex,
+	)
+
+	return cmdObj.Run()
+}
+
 // AmendTo amends the given commit with whatever files are staged
 func (self *RebaseCommands) AmendTo(commits []*models.Commit, commitIndex int) error {
 	commit := commits[commitIndex]
 
-	if err := self.commit.CreateFixupCommit(commit.Sha); err != nil {
+	if err := self.commit.CreateFixupCommit(commit.Hash); err != nil {
 		return err
 	}
 
-	// Get the sha of the commit we just created
+	// Get the hash of the commit we just created
 	cmdArgs := NewGitCmd("rev-parse").Arg("--verify", "HEAD").ToArgv()
-	fixupSha, err := self.cmd.New(cmdArgs).RunWithOutput()
+	fixupHash, err := self.cmd.New(cmdArgs).RunWithOutput()
 	if err != nil {
 		return err
 	}
 
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot:  getBaseShaOrRoot(commits, commitIndex+1),
+		baseHashOrRoot: getBaseHashOrRoot(commits, commitIndex+1),
 		overrideEditor: true,
-		instruction:    daemon.NewMoveFixupCommitDownInstruction(commit.Sha, fixupSha),
+		instruction:    daemon.NewMoveFixupCommitDownInstruction(commit.Hash, fixupHash),
 	}).Run()
 }
 
-// EditRebaseTodo sets the action for a given rebase commit in the git-rebase-todo file
-func (self *RebaseCommands) EditRebaseTodo(commit *models.Commit, action todo.TodoCommand) error {
+func todoFromCommit(commit *models.Commit) utils.Todo {
+	if commit.Action == todo.UpdateRef {
+		return utils.Todo{Ref: commit.Name, Action: commit.Action}
+	} else {
+		return utils.Todo{Hash: commit.Hash, Action: commit.Action}
+	}
+}
+
+// Sets the action for the given commits in the git-rebase-todo file
+func (self *RebaseCommands) EditRebaseTodo(commits []*models.Commit, action todo.TodoCommand) error {
+	commitsWithAction := lo.Map(commits, func(commit *models.Commit, _ int) utils.TodoChange {
+		return utils.TodoChange{
+			Hash:      commit.Hash,
+			OldAction: commit.Action,
+			NewAction: action,
+		}
+	})
+
 	return utils.EditRebaseTodo(
-		filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge/git-rebase-todo"), commit.Sha, commit.Action, action, self.config.GetCoreCommentChar())
+		filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge/git-rebase-todo"),
+		commitsWithAction,
+		self.config.GetCoreCommentChar(),
+	)
 }
 
-// MoveTodoDown moves a rebase todo item down by one position
-func (self *RebaseCommands) MoveTodoDown(commit *models.Commit) error {
-	fileName := filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge/git-rebase-todo")
-	return utils.MoveTodoDown(fileName, commit.Sha, commit.Action, self.config.GetCoreCommentChar())
+func (self *RebaseCommands) DeleteUpdateRefTodos(commits []*models.Commit) error {
+	todosToDelete := lo.Map(commits, func(commit *models.Commit, _ int) utils.Todo {
+		return todoFromCommit(commit)
+	})
+
+	todosFileContent, err := utils.DeleteTodos(
+		filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge/git-rebase-todo"),
+		todosToDelete,
+		self.config.GetCoreCommentChar(),
+	)
+	if err != nil {
+		return err
+	}
+
+	return self.GitRebaseEditTodo(todosFileContent)
 }
 
-// MoveTodoDown moves a rebase todo item down by one position
-func (self *RebaseCommands) MoveTodoUp(commit *models.Commit) error {
+func (self *RebaseCommands) MoveTodosDown(commits []*models.Commit) error {
 	fileName := filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge/git-rebase-todo")
-	return utils.MoveTodoUp(fileName, commit.Sha, commit.Action, self.config.GetCoreCommentChar())
+	todosToMove := lo.Map(commits, func(commit *models.Commit, _ int) utils.Todo {
+		return todoFromCommit(commit)
+	})
+
+	return utils.MoveTodosDown(fileName, todosToMove, self.config.GetCoreCommentChar())
+}
+
+func (self *RebaseCommands) MoveTodosUp(commits []*models.Commit) error {
+	fileName := filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge/git-rebase-todo")
+	todosToMove := lo.Map(commits, func(commit *models.Commit, _ int) utils.Todo {
+		return todoFromCommit(commit)
+	})
+
+	return utils.MoveTodosUp(fileName, todosToMove, self.config.GetCoreCommentChar())
 }
 
 // SquashAllAboveFixupCommits squashes all fixup! commits above the given one
 func (self *RebaseCommands) SquashAllAboveFixupCommits(commit *models.Commit) error {
-	shaOrRoot := commit.Sha + "^"
+	hashOrRoot := commit.Hash + "^"
 	if commit.IsFirstCommit() {
-		shaOrRoot = "--root"
+		hashOrRoot = "--root"
 	}
 
 	cmdArgs := NewGitCmd("rebase").
-		Arg("--interactive", "--rebase-merges", "--autostash", "--autosquash", shaOrRoot).
+		Arg("--interactive", "--rebase-merges", "--autostash", "--autosquash", hashOrRoot).
 		ToArgv()
 
 	return self.runSkipEditorCommand(self.cmd.New(cmdArgs))
@@ -324,13 +393,13 @@ func (self *RebaseCommands) BeginInteractiveRebaseForCommit(
 	}
 
 	changes := []daemon.ChangeTodoAction{{
-		Sha:       commits[commitIndex].Sha,
+		Hash:      commits[commitIndex].Hash,
 		NewAction: todo.Edit,
 	}}
 	self.os.LogCommand(logTodoChanges(changes), false)
 
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot:              getBaseShaOrRoot(commits, commitIndex+1),
+		baseHashOrRoot:             getBaseHashOrRoot(commits, commitIndex+1),
 		overrideEditor:             true,
 		keepCommitsThatBecomeEmpty: keepCommitsThatBecomeEmpty,
 		instruction:                daemon.NewChangeTodoActionsInstruction(changes),
@@ -339,13 +408,13 @@ func (self *RebaseCommands) BeginInteractiveRebaseForCommit(
 
 // RebaseBranch interactive rebases onto a branch
 func (self *RebaseCommands) RebaseBranch(branchName string) error {
-	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{baseShaOrRoot: branchName}).Run()
+	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{baseHashOrRoot: branchName}).Run()
 }
 
 func (self *RebaseCommands) RebaseBranchFromBaseCommit(targetBranchName string, baseCommit string) error {
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot: baseCommit,
-		onto:          targetBranchName,
+		baseHashOrRoot: baseCommit,
+		onto:           targetBranchName,
 	}).Run()
 }
 
@@ -403,23 +472,25 @@ func (self *RebaseCommands) runSkipEditorCommand(cmdObj oscommands.ICmdObj) erro
 }
 
 // DiscardOldFileChanges discards changes to a file from an old commit
-func (self *RebaseCommands) DiscardOldFileChanges(commits []*models.Commit, commitIndex int, fileName string) error {
+func (self *RebaseCommands) DiscardOldFileChanges(commits []*models.Commit, commitIndex int, filePaths []string) error {
 	if err := self.BeginInteractiveRebaseForCommit(commits, commitIndex, false); err != nil {
 		return err
 	}
 
-	// check if file exists in previous commit (this command returns an error if the file doesn't exist)
-	cmdArgs := NewGitCmd("cat-file").Arg("-e", "HEAD^:"+fileName).ToArgv()
+	for _, filePath := range filePaths {
+		// check if file exists in previous commit (this command returns an error if the file doesn't exist)
+		cmdArgs := NewGitCmd("cat-file").Arg("-e", "HEAD^:"+filePath).ToArgv()
 
-	if err := self.cmd.New(cmdArgs).Run(); err != nil {
-		if err := self.os.Remove(fileName); err != nil {
+		if err := self.cmd.New(cmdArgs).Run(); err != nil {
+			if err := self.os.Remove(filePath); err != nil {
+				return err
+			}
+			if err := self.workingTree.StageFile(filePath); err != nil {
+				return err
+			}
+		} else if err := self.workingTree.CheckoutFile("HEAD^", filePath); err != nil {
 			return err
 		}
-		if err := self.workingTree.StageFile(fileName); err != nil {
-			return err
-		}
-	} else if err := self.workingTree.CheckoutFile("HEAD^", fileName); err != nil {
-		return err
 	}
 
 	// amend the commit
@@ -432,10 +503,10 @@ func (self *RebaseCommands) DiscardOldFileChanges(commits []*models.Commit, comm
 	return self.ContinueRebase()
 }
 
-// CherryPickCommits begins an interactive rebase with the given shas being cherry picked onto HEAD
+// CherryPickCommits begins an interactive rebase with the given hashes being cherry picked onto HEAD
 func (self *RebaseCommands) CherryPickCommits(commits []*models.Commit) error {
 	commitLines := lo.Map(commits, func(commit *models.Commit, _ int) string {
-		return fmt.Sprintf("%s %s", utils.ShortSha(commit.Sha), commit.Name)
+		return fmt.Sprintf("%s %s", utils.ShortHash(commit.Hash), commit.Name)
 	})
 	msg := utils.ResolvePlaceholderString(
 		self.Tr.Log.CherryPickCommits,
@@ -446,20 +517,34 @@ func (self *RebaseCommands) CherryPickCommits(commits []*models.Commit) error {
 	self.os.LogCommand(msg, false)
 
 	return self.PrepareInteractiveRebaseCommand(PrepareInteractiveRebaseCommandOpts{
-		baseShaOrRoot: "HEAD",
-		instruction:   daemon.NewCherryPickCommitsInstruction(commits),
+		baseHashOrRoot: "HEAD",
+		instruction:    daemon.NewCherryPickCommitsInstruction(commits),
 	}).Run()
 }
 
+// CherryPickCommitsDuringRebase simply prepends the given commits to the existing git-rebase-todo file
+func (self *RebaseCommands) CherryPickCommitsDuringRebase(commits []*models.Commit) error {
+	todoLines := lo.Map(commits, func(commit *models.Commit, _ int) daemon.TodoLine {
+		return daemon.TodoLine{
+			Action: "pick",
+			Commit: commit,
+		}
+	})
+
+	todo := daemon.TodoLinesToString(todoLines)
+	filePath := filepath.Join(self.repoPaths.worktreeGitDirPath, "rebase-merge/git-rebase-todo")
+	return utils.PrependStrToTodoFile(filePath, []byte(todo))
+}
+
 // we can't start an interactive rebase from the first commit without passing the
 // '--root' arg
-func getBaseShaOrRoot(commits []*models.Commit, index int) string {
+func getBaseHashOrRoot(commits []*models.Commit, index int) string {
 	// We assume that the commits slice contains the initial commit of the repo.
 	// Technically this assumption could prove false, but it's unlikely you'll
 	// be starting a rebase from 300 commits ago (which is the original commit limit
 	// at time of writing)
 	if index < len(commits) {
-		return commits[index].Sha
+		return commits[index].Hash
 	} else {
 		return "--root"
 	}

pkg/commands/git_commands/rebase_test.go

@@ -111,7 +111,7 @@ func TestRebaseDiscardOldFileChanges(t *testing.T) {
 		gitConfigMockResponses map[string]string
 		commits                []*models.Commit
 		commitIndex            int
-		fileName               string
+		fileName               []string
 		runner                 *oscommands.FakeCmdObjRunner
 		test                   func(error)
 	}
@@ -122,7 +122,7 @@ func TestRebaseDiscardOldFileChanges(t *testing.T) {
 			gitConfigMockResponses: nil,
 			commits:                []*models.Commit{},
 			commitIndex:            0,
-			fileName:               "test999.txt",
+			fileName:               []string{"test999.txt"},
 			runner:                 oscommands.NewFakeRunner(t),
 			test: func(err error) {
 				assert.Error(t, err)
@@ -131,9 +131,9 @@ func TestRebaseDiscardOldFileChanges(t *testing.T) {
 		{
 			testName:               "returns error when using gpg",
 			gitConfigMockResponses: map[string]string{"commit.gpgsign": "true"},
-			commits:                []*models.Commit{{Name: "commit", Sha: "123456"}},
+			commits:                []*models.Commit{{Name: "commit", Hash: "123456"}},
 			commitIndex:            0,
-			fileName:               "test999.txt",
+			fileName:               []string{"test999.txt"},
 			runner:                 oscommands.NewFakeRunner(t),
 			test: func(err error) {
 				assert.Error(t, err)
@@ -143,11 +143,11 @@ func TestRebaseDiscardOldFileChanges(t *testing.T) {
 			testName:               "checks out file if it already existed",
 			gitConfigMockResponses: nil,
 			commits: []*models.Commit{
-				{Name: "commit", Sha: "123456"},
-				{Name: "commit2", Sha: "abcdef"},
+				{Name: "commit", Hash: "123456"},
+				{Name: "commit2", Hash: "abcdef"},
 			},
 			commitIndex: 0,
-			fileName:    "test999.txt",
+			fileName:    []string{"test999.txt"},
 			runner: oscommands.NewFakeRunner(t).
 				ExpectGitArgs([]string{"rebase", "--interactive", "--autostash", "--keep-empty", "--no-autosquash", "--rebase-merges", "abcdef"}, "", nil).
 				ExpectGitArgs([]string{"cat-file", "-e", "HEAD^:test999.txt"}, "", nil).

pkg/commands/git_commands/reflog_commit_loader.go

@@ -23,7 +23,7 @@ func NewReflogCommitLoader(common *common.Common, cmd oscommands.ICmdObjBuilder)
 
 // GetReflogCommits only returns the new reflog commits since the given lastReflogCommit
 // if none is passed (i.e. it's value is nil) then we get all the reflog commits
-func (self *ReflogCommitLoader) GetReflogCommits(lastReflogCommit *models.Commit, filterPath string) ([]*models.Commit, bool, error) {
+func (self *ReflogCommitLoader) GetReflogCommits(lastReflogCommit *models.Commit, filterPath string, filterAuthor string) ([]*models.Commit, bool, error) {
 	commits := make([]*models.Commit, 0)
 
 	cmdArgs := NewGitCmd("log").
@@ -31,6 +31,7 @@ func (self *ReflogCommitLoader) GetReflogCommits(lastReflogCommit *models.Commit
 		Arg("-g").
 		Arg("--abbrev=40").
 		Arg("--format=%h%x00%ct%x00%gs%x00%p").
+		ArgIf(filterAuthor != "", "--author="+filterAuthor).
 		ArgIf(filterPath != "", "--follow", "--", filterPath).
 		ToArgv()
 
@@ -44,7 +45,7 @@ func (self *ReflogCommitLoader) GetReflogCommits(lastReflogCommit *models.Commit
 		}
 
 		// note that the unix timestamp here is the timestamp of the COMMIT, not the reflog entry itself,
-		// so two consecutive reflog entries may have both the same SHA and therefore same timestamp.
+		// so two consecutive reflog entries may have both the same hash and therefore same timestamp.
 		// We use the reflog message to disambiguate, and fingers crossed that we never see the same of those
 		// twice in a row. Reason being that it would mean we'd be erroneously exiting early.
 		if lastReflogCommit != nil && self.sameReflogCommit(commit, lastReflogCommit) {
@@ -64,7 +65,7 @@ func (self *ReflogCommitLoader) GetReflogCommits(lastReflogCommit *models.Commit
 }
 
 func (self *ReflogCommitLoader) sameReflogCommit(a *models.Commit, b *models.Commit) bool {
-	return a.Sha == b.Sha && a.UnixTimestamp == b.UnixTimestamp && a.Name == b.Name
+	return a.Hash == b.Hash && a.UnixTimestamp == b.UnixTimestamp && a.Name == b.Name
 }
 
 func (self *ReflogCommitLoader) parseLine(line string) (*models.Commit, bool) {
@@ -82,7 +83,7 @@ func (self *ReflogCommitLoader) parseLine(line string) (*models.Commit, bool) {
 	}
 
 	return &models.Commit{
-		Sha:           fields[0],
+		Hash:          fields[0],
 		Name:          fields[2],
 		UnixTimestamp: int64(unixTimestamp),
 		Status:        models.StatusReflog,

pkg/commands/git_commands/reflog_commit_loader_test.go

@@ -25,6 +25,7 @@ func TestGetReflogCommits(t *testing.T) {
 		runner                  *oscommands.FakeCmdObjRunner
 		lastReflogCommit        *models.Commit
 		filterPath              string
+		filterAuthor            string
 		expectedCommits         []*models.Commit
 		expectedOnlyObtainedNew bool
 		expectedError           error
@@ -49,35 +50,35 @@ func TestGetReflogCommits(t *testing.T) {
 			lastReflogCommit: nil,
 			expectedCommits: []*models.Commit{
 				{
-					Sha:           "c3c4b66b64c97ffeecde",
+					Hash:          "c3c4b66b64c97ffeecde",
 					Name:          "checkout: moving from A to B",
 					Status:        models.StatusReflog,
 					UnixTimestamp: 1643150483,
 					Parents:       []string{"51baa8c1"},
 				},
 				{
-					Sha:           "c3c4b66b64c97ffeecde",
+					Hash:          "c3c4b66b64c97ffeecde",
 					Name:          "checkout: moving from B to A",
 					Status:        models.StatusReflog,
 					UnixTimestamp: 1643150483,
 					Parents:       []string{"51baa8c1"},
 				},
 				{
-					Sha:           "c3c4b66b64c97ffeecde",
+					Hash:          "c3c4b66b64c97ffeecde",
 					Name:          "checkout: moving from A to B",
 					Status:        models.StatusReflog,
 					UnixTimestamp: 1643150483,
 					Parents:       []string{"51baa8c1"},
 				},
 				{
-					Sha:           "c3c4b66b64c97ffeecde",
+					Hash:          "c3c4b66b64c97ffeecde",
 					Name:          "checkout: moving from master to A",
 					Status:        models.StatusReflog,
 					UnixTimestamp: 1643150483,
 					Parents:       []string{"51baa8c1"},
 				},
 				{
-					Sha:           "f4ddf2f0d4be4ccc7efa",
+					Hash:          "f4ddf2f0d4be4ccc7efa",
 					Name:          "checkout: moving from A to master",
 					Status:        models.StatusReflog,
 					UnixTimestamp: 1643149435,
@@ -93,7 +94,7 @@ func TestGetReflogCommits(t *testing.T) {
 				ExpectGitArgs([]string{"-c", "log.showSignature=false", "log", "-g", "--abbrev=40", "--format=%h%x00%ct%x00%gs%x00%p"}, reflogOutput, nil),
 
 			lastReflogCommit: &models.Commit{
-				Sha:           "c3c4b66b64c97ffeecde",
+				Hash:          "c3c4b66b64c97ffeecde",
 				Name:          "checkout: moving from B to A",
 				Status:        models.StatusReflog,
 				UnixTimestamp: 1643150483,
@@ -101,7 +102,7 @@ func TestGetReflogCommits(t *testing.T) {
 			},
 			expectedCommits: []*models.Commit{
 				{
-					Sha:           "c3c4b66b64c97ffeecde",
+					Hash:          "c3c4b66b64c97ffeecde",
 					Name:          "checkout: moving from A to B",
 					Status:        models.StatusReflog,
 					UnixTimestamp: 1643150483,
@@ -117,7 +118,7 @@ func TestGetReflogCommits(t *testing.T) {
 				ExpectGitArgs([]string{"-c", "log.showSignature=false", "log", "-g", "--abbrev=40", "--format=%h%x00%ct%x00%gs%x00%p", "--follow", "--", "path"}, reflogOutput, nil),
 
 			lastReflogCommit: &models.Commit{
-				Sha:           "c3c4b66b64c97ffeecde",
+				Hash:          "c3c4b66b64c97ffeecde",
 				Name:          "checkout: moving from B to A",
 				Status:        models.StatusReflog,
 				UnixTimestamp: 1643150483,
@@ -126,7 +127,32 @@ func TestGetReflogCommits(t *testing.T) {
 			filterPath: "path",
 			expectedCommits: []*models.Commit{
 				{
-					Sha:           "c3c4b66b64c97ffeecde",
+					Hash:          "c3c4b66b64c97ffeecde",
+					Name:          "checkout: moving from A to B",
+					Status:        models.StatusReflog,
+					UnixTimestamp: 1643150483,
+					Parents:       []string{"51baa8c1"},
+				},
+			},
+			expectedOnlyObtainedNew: true,
+			expectedError:           nil,
+		},
+		{
+			testName: "when passing filterAuthor",
+			runner: oscommands.NewFakeRunner(t).
+				ExpectGitArgs([]string{"-c", "log.showSignature=false", "log", "-g", "--abbrev=40", "--format=%h%x00%ct%x00%gs%x00%p", "--author=John Doe <john@doe.com>"}, reflogOutput, nil),
+
+			lastReflogCommit: &models.Commit{
+				Hash:          "c3c4b66b64c97ffeecde",
+				Name:          "checkout: moving from B to A",
+				Status:        models.StatusReflog,
+				UnixTimestamp: 1643150483,
+				Parents:       []string{"51baa8c1"},
+			},
+			filterAuthor: "John Doe <john@doe.com>",
+			expectedCommits: []*models.Commit{
+				{
+					Hash:          "c3c4b66b64c97ffeecde",
 					Name:          "checkout: moving from A to B",
 					Status:        models.StatusReflog,
 					UnixTimestamp: 1643150483,
@@ -157,7 +183,7 @@ func TestGetReflogCommits(t *testing.T) {
 				cmd:    oscommands.NewDummyCmdObjBuilder(scenario.runner),
 			}
 
-			commits, onlyObtainednew, err := builder.GetReflogCommits(scenario.lastReflogCommit, scenario.filterPath)
+			commits, onlyObtainednew, err := builder.GetReflogCommits(scenario.lastReflogCommit, scenario.filterPath, scenario.filterAuthor)
 			assert.Equal(t, scenario.expectedOnlyObtainedNew, onlyObtainednew)
 			assert.Equal(t, scenario.expectedError, err)
 			t.Logf("actual commits: \n%s", litter.Sdump(commits))

pkg/commands/git_commands/remote.go

@@ -2,6 +2,7 @@ package git_commands
 
 import (
 	"fmt"
+	"strings"
 
 	"github.com/jesseduffield/gocui"
 )
@@ -53,7 +54,15 @@ func (self *RemoteCommands) DeleteRemoteBranch(task gocui.Task, remoteName strin
 		Arg(remoteName, "--delete", branchName).
 		ToArgv()
 
-	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).WithMutex(self.syncMutex).Run()
+	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).Run()
+}
+
+func (self *RemoteCommands) DeleteRemoteTag(task gocui.Task, remoteName string, tagName string) error {
+	cmdArgs := NewGitCmd("push").
+		Arg(remoteName, "--delete", tagName).
+		ToArgv()
+
+	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).Run()
 }
 
 // CheckRemoteBranchExists Returns remote branch
@@ -66,3 +75,14 @@ func (self *RemoteCommands) CheckRemoteBranchExists(branchName string) bool {
 
 	return err == nil
 }
+
+// Resolve what might be a aliased URL into a full URL
+// SEE: `man -P 'less +/--get-url +n' git-ls-remote`
+func (self *RemoteCommands) GetRemoteURL(remoteName string) (string, error) {
+	cmdArgs := NewGitCmd("ls-remote").
+		Arg("--get-url", remoteName).
+		ToArgv()
+
+	url, err := self.cmd.New(cmdArgs).RunWithOutput()
+	return strings.TrimSpace(url), err
+}

pkg/commands/git_commands/remote_loader.go

@@ -1,6 +1,7 @@
 package git_commands
 
 import (
+	"fmt"
 	"strings"
 	"sync"
 
@@ -83,14 +84,23 @@ func (self *RemoteLoader) GetRemotes() ([]*models.Remote, error) {
 func (self *RemoteLoader) getRemoteBranchesByRemoteName() (map[string][]*models.RemoteBranch, error) {
 	remoteBranchesByRemoteName := make(map[string][]*models.RemoteBranch)
 
-	cmdArgs := NewGitCmd("branch").Arg("-r").ToArgv()
-	err := self.cmd.New(cmdArgs).DontLog().RunAndProcessLines(func(line string) (bool, error) {
-		// excluding lines like 'origin/HEAD -> origin/master' (there will be a separate
-		// line for 'origin/master')
-		if strings.Contains(line, "->") {
-			return false, nil
-		}
+	var sortOrder string
+	switch strings.ToLower(self.AppState.RemoteBranchSortOrder) {
+	case "alphabetical":
+		sortOrder = "refname"
+	case "date":
+		sortOrder = "-committerdate"
+	default:
+		sortOrder = "refname"
+	}
 
+	cmdArgs := NewGitCmd("for-each-ref").
+		Arg(fmt.Sprintf("--sort=%s", sortOrder)).
+		Arg("--format=%(refname:short)").
+		Arg("refs/remotes").
+		ToArgv()
+
+	err := self.cmd.New(cmdArgs).DontLog().RunAndProcessLines(func(line string) (bool, error) {
 		line = strings.TrimSpace(line)
 
 		split := strings.SplitN(line, "/", 2)

pkg/commands/git_commands/repo_paths.go

@@ -1,21 +1,18 @@
 package git_commands
 
 import (
-	"fmt"
 	ioFs "io/fs"
-	"os"
 	"path"
 	"path/filepath"
 	"strings"
 
 	"github.com/go-errors/errors"
-	"github.com/jesseduffield/lazygit/pkg/env"
-	"github.com/samber/lo"
+	"github.com/jesseduffield/lazygit/pkg/commands/oscommands"
+	"github.com/jesseduffield/lazygit/pkg/utils"
 	"github.com/spf13/afero"
 )
 
 type RepoPaths struct {
-	currentPath        string
 	worktreePath       string
 	worktreeGitDirPath string
 	repoPath           string
@@ -23,12 +20,7 @@ type RepoPaths struct {
 	repoName           string
 }
 
-// Current working directory of the program. Currently, this will always
-// be the same as WorktreePath(), but in future we may support running
-// lazygit from inside a subdirectory of the worktree.
-func (self *RepoPaths) CurrentPath() string {
-	return self.currentPath
-}
+var gitPathFormatVersion GitVersion = GitVersion{2, 31, 0, ""}
 
 // Path to the current worktree. If we're in the main worktree, this will
 // be the same as RepoPath()
@@ -65,7 +57,6 @@ func (self *RepoPaths) RepoName() string {
 // Returns the repo paths for a typical repo
 func MockRepoPaths(currentPath string) *RepoPaths {
 	return &RepoPaths{
-		currentPath:        currentPath,
 		worktreePath:       currentPath,
 		worktreeGitDirPath: path.Join(currentPath, ".git"),
 		repoPath:           currentPath,
@@ -75,30 +66,41 @@ func MockRepoPaths(currentPath string) *RepoPaths {
 }
 
 func GetRepoPaths(
-	fs afero.Fs,
-	currentPath string,
+	cmd oscommands.ICmdObjBuilder,
+	version *GitVersion,
 ) (*RepoPaths, error) {
-	return getRepoPathsAux(afero.NewOsFs(), resolveSymlink, currentPath)
-}
-
-func getRepoPathsAux(
-	fs afero.Fs,
-	resolveSymlinkFn func(string) (string, error),
-	currentPath string,
-) (*RepoPaths, error) {
-	worktreePath := currentPath
-	repoGitDirPath, repoPath, err := getCurrentRepoGitDirPath(fs, resolveSymlinkFn, currentPath)
+	gitDirOutput, err := callGitRevParse(cmd, version, "--show-toplevel", "--absolute-git-dir", "--git-common-dir", "--show-superproject-working-tree")
 	if err != nil {
-		return nil, errors.Errorf("failed to get repo git dir path: %v", err)
+		return nil, err
 	}
-	worktreeGitDirPath, err := worktreeGitDirPath(fs, currentPath)
-	if err != nil {
-		return nil, errors.Errorf("failed to get worktree git dir path: %v", err)
+
+	gitDirResults := strings.Split(utils.NormalizeLinefeeds(gitDirOutput), "\n")
+	worktreePath := gitDirResults[0]
+	worktreeGitDirPath := gitDirResults[1]
+	repoGitDirPath := gitDirResults[2]
+	if version.IsOlderThanVersion(&gitPathFormatVersion) {
+		repoGitDirPath, err = filepath.Abs(repoGitDirPath)
+		if err != nil {
+			return nil, err
+		}
+	}
+
+	// If we're in a submodule, --show-superproject-working-tree will return
+	// a value, meaning gitDirResults will be length 4. In that case
+	// return the worktree path as the repoPath. Otherwise we're in a
+	// normal repo or a worktree so return the parent of the git common
+	// dir (repoGitDirPath)
+	isSubmodule := len(gitDirResults) == 4
+
+	var repoPath string
+	if isSubmodule {
+		repoPath = worktreePath
+	} else {
+		repoPath = path.Dir(repoGitDirPath)
 	}
 	repoName := path.Base(repoPath)
 
 	return &RepoPaths{
-		currentPath:        currentPath,
 		worktreePath:       worktreePath,
 		worktreeGitDirPath: worktreeGitDirPath,
 		repoPath:           repoPath,
@@ -107,106 +109,31 @@ func getRepoPathsAux(
 	}, nil
 }
 
-// Returns the path of the git-dir for the worktree. For linked worktrees, the worktree has
-// a .git file that points to the git-dir (which itself lives in the git-dir
-// of the repo)
-func worktreeGitDirPath(fs afero.Fs, worktreePath string) (string, error) {
-	// if .git is a file, we're in a linked worktree, otherwise we're in
-	// the main worktree
-	dotGitPath := path.Join(worktreePath, ".git")
-	gitFileInfo, err := fs.Stat(dotGitPath)
-	if err != nil {
-		return "", err
-	}
-
-	if gitFileInfo.IsDir() {
-		return dotGitPath, nil
-	}
-
-	return linkedWorktreeGitDirPath(fs, worktreePath)
+func callGitRevParse(
+	cmd oscommands.ICmdObjBuilder,
+	version *GitVersion,
+	gitRevArgs ...string,
+) (string, error) {
+	return callGitRevParseWithDir(cmd, version, "", gitRevArgs...)
 }
 
-func linkedWorktreeGitDirPath(fs afero.Fs, worktreePath string) (string, error) {
-	dotGitPath := path.Join(worktreePath, ".git")
-	gitFileContents, err := afero.ReadFile(fs, dotGitPath)
+func callGitRevParseWithDir(
+	cmd oscommands.ICmdObjBuilder,
+	version *GitVersion,
+	dir string,
+	gitRevArgs ...string,
+) (string, error) {
+	gitRevParse := NewGitCmd("rev-parse").ArgIf(version.IsAtLeastVersion(&gitPathFormatVersion), "--path-format=absolute").Arg(gitRevArgs...)
+	if dir != "" {
+		gitRevParse.Dir(dir)
+	}
+
+	gitCmd := cmd.New(gitRevParse.ToArgv()).DontLog()
+	res, err := gitCmd.RunWithOutput()
 	if err != nil {
-		return "", err
+		return "", errors.Errorf("'%s' failed: %v", gitCmd.ToString(), err)
 	}
-
-	// The file will have `gitdir: /path/to/.git/worktrees/<worktree-name>`
-	gitDirLine := lo.Filter(strings.Split(string(gitFileContents), "\n"), func(line string, _ int) bool {
-		return strings.HasPrefix(line, "gitdir: ")
-	})
-
-	if len(gitDirLine) == 0 {
-		return "", errors.New(fmt.Sprintf("%s is a file which suggests we are in a submodule or a worktree but the file's contents do not contain a gitdir pointing to the actual .git directory", dotGitPath))
-	}
-
-	gitDir := strings.TrimPrefix(gitDirLine[0], "gitdir: ")
-	return gitDir, nil
-}
-
-func getCurrentRepoGitDirPath(
-	fs afero.Fs,
-	resolveSymlinkFn func(string) (string, error),
-	currentPath string,
-) (string, string, error) {
-	var unresolvedGitPath string
-	if env.GetGitDirEnv() != "" {
-		unresolvedGitPath = env.GetGitDirEnv()
-	} else {
-		unresolvedGitPath = path.Join(currentPath, ".git")
-	}
-
-	gitPath, err := resolveSymlinkFn(unresolvedGitPath)
-	if err != nil {
-		return "", "", err
-	}
-
-	// check if .git is a file or a directory
-	gitFileInfo, err := fs.Stat(gitPath)
-	if err != nil {
-		return "", "", err
-	}
-
-	if gitFileInfo.IsDir() {
-		// must be in the main worktree
-		return gitPath, path.Dir(gitPath), nil
-	}
-
-	// either in a submodule, or worktree
-	worktreeGitPath, err := linkedWorktreeGitDirPath(fs, currentPath)
-	if err != nil {
-		return "", "", errors.Errorf("could not find git dir for %s: %v", currentPath, err)
-	}
-
-	// confirm whether the next directory up is the worktrees/submodules directory
-	parent := path.Dir(worktreeGitPath)
-	if path.Base(parent) != "worktrees" && path.Base(parent) != "modules" {
-		return "", "", errors.Errorf("could not find git dir for %s", currentPath)
-	}
-
-	// if it's a submodule, we treat it as its own repo
-	if path.Base(parent) == "modules" {
-		return worktreeGitPath, currentPath, nil
-	}
-
-	gitDirPath := path.Dir(parent)
-	return gitDirPath, path.Dir(gitDirPath), nil
-}
-
-// takes a path containing a symlink and returns the true path
-func resolveSymlink(path string) (string, error) {
-	l, err := os.Lstat(path)
-	if err != nil {
-		return "", err
-	}
-
-	if l.Mode()&os.ModeSymlink == 0 {
-		return path, nil
-	}
-
-	return filepath.EvalSymlinks(path)
+	return strings.TrimSpace(res), nil
 }
 
 // Returns the paths of linked worktrees

pkg/commands/git_commands/repo_paths_test.go

@@ -1,34 +1,50 @@
 package git_commands
 
 import (
+	"fmt"
+	"strings"
 	"testing"
 
 	"github.com/go-errors/errors"
-	"github.com/spf13/afero"
+	"github.com/jesseduffield/lazygit/pkg/commands/oscommands"
 	"github.com/stretchr/testify/assert"
 )
 
-func mockResolveSymlinkFn(p string) (string, error) { return p, nil }
+type (
+	argFn func() []string
+	errFn func(getRevParseArgs argFn) error
+)
 
 type Scenario struct {
 	Name       string
-	BeforeFunc func(fs afero.Fs)
+	BeforeFunc func(runner *oscommands.FakeCmdObjRunner, getRevParseArgs argFn)
 	Path       string
 	Expected   *RepoPaths
-	Err        error
+	Err        errFn
 }
 
-func TestGetRepoPathsAux(t *testing.T) {
+func TestGetRepoPaths(t *testing.T) {
 	scenarios := []Scenario{
 		{
 			Name: "typical case",
-			BeforeFunc: func(fs afero.Fs) {
+			BeforeFunc: func(runner *oscommands.FakeCmdObjRunner, getRevParseArgs argFn) {
 				// setup for main worktree
-				_ = fs.MkdirAll("/path/to/repo/.git", 0o755)
+				expectedOutput := []string{
+					// --show-toplevel
+					"/path/to/repo",
+					// --git-dir
+					"/path/to/repo/.git",
+					// --git-common-dir
+					"/path/to/repo/.git",
+					// --show-superproject-working-tree
+				}
+				runner.ExpectGitArgs(
+					append(getRevParseArgs(), "--show-toplevel", "--absolute-git-dir", "--git-common-dir", "--show-superproject-working-tree"),
+					strings.Join(expectedOutput, "\n"),
+					nil)
 			},
 			Path: "/path/to/repo",
 			Expected: &RepoPaths{
-				currentPath:        "/path/to/repo",
 				worktreePath:       "/path/to/repo",
 				worktreeGitDirPath: "/path/to/repo/.git",
 				repoPath:           "/path/to/repo",
@@ -37,53 +53,26 @@ func TestGetRepoPathsAux(t *testing.T) {
 			},
 			Err: nil,
 		},
-		{
-			Name: "linked worktree",
-			BeforeFunc: func(fs afero.Fs) {
-				// setup for linked worktree
-				_ = fs.MkdirAll("/path/to/repo/.git/worktrees/worktree1", 0o755)
-				_ = afero.WriteFile(fs, "/path/to/repo/worktree1/.git", []byte("gitdir: /path/to/repo/.git/worktrees/worktree1"), 0o644)
-			},
-			Path: "/path/to/repo/worktree1",
-			Expected: &RepoPaths{
-				currentPath:        "/path/to/repo/worktree1",
-				worktreePath:       "/path/to/repo/worktree1",
-				worktreeGitDirPath: "/path/to/repo/.git/worktrees/worktree1",
-				repoPath:           "/path/to/repo",
-				repoGitDirPath:     "/path/to/repo/.git",
-				repoName:           "repo",
-			},
-			Err: nil,
-		},
-		{
-			Name: "worktree .git file missing gitdir directive",
-			BeforeFunc: func(fs afero.Fs) {
-				_ = fs.MkdirAll("/path/to/repo/.git/worktrees/worktree2", 0o755)
-				_ = afero.WriteFile(fs, "/path/to/repo/worktree2/.git", []byte("blah"), 0o644)
-			},
-			Path:     "/path/to/repo/worktree2",
-			Expected: nil,
-			Err:      errors.New("failed to get repo git dir path: could not find git dir for /path/to/repo/worktree2: /path/to/repo/worktree2/.git is a file which suggests we are in a submodule or a worktree but the file's contents do not contain a gitdir pointing to the actual .git directory"),
-		},
-		{
-			Name: "worktree .git file gitdir directive points to a non-existing directory",
-			BeforeFunc: func(fs afero.Fs) {
-				_ = fs.MkdirAll("/path/to/repo/.git/worktrees/worktree2", 0o755)
-				_ = afero.WriteFile(fs, "/path/to/repo/worktree2/.git", []byte("gitdir: /nonexistant"), 0o644)
-			},
-			Path:     "/path/to/repo/worktree2",
-			Expected: nil,
-			Err:      errors.New("failed to get repo git dir path: could not find git dir for /path/to/repo/worktree2"),
-		},
 		{
 			Name: "submodule",
-			BeforeFunc: func(fs afero.Fs) {
-				_ = fs.MkdirAll("/path/to/repo/.git/modules/submodule1", 0o755)
-				_ = afero.WriteFile(fs, "/path/to/repo/submodule1/.git", []byte("gitdir: /path/to/repo/.git/modules/submodule1"), 0o644)
+			BeforeFunc: func(runner *oscommands.FakeCmdObjRunner, getRevParseArgs argFn) {
+				expectedOutput := []string{
+					// --show-toplevel
+					"/path/to/repo/submodule1",
+					// --git-dir
+					"/path/to/repo/.git/modules/submodule1",
+					// --git-common-dir
+					"/path/to/repo/.git/modules/submodule1",
+					// --show-superproject-working-tree
+					"/path/to/repo",
+				}
+				runner.ExpectGitArgs(
+					append(getRevParseArgs(), "--show-toplevel", "--absolute-git-dir", "--git-common-dir", "--show-superproject-working-tree"),
+					strings.Join(expectedOutput, "\n"),
+					nil)
 			},
 			Path: "/path/to/repo/submodule1",
 			Expected: &RepoPaths{
-				currentPath:        "/path/to/repo/submodule1",
 				worktreePath:       "/path/to/repo/submodule1",
 				worktreeGitDirPath: "/path/to/repo/.git/modules/submodule1",
 				repoPath:           "/path/to/repo/submodule1",
@@ -92,23 +81,53 @@ func TestGetRepoPathsAux(t *testing.T) {
 			},
 			Err: nil,
 		},
+		{
+			Name: "git rev-parse returns an error",
+			BeforeFunc: func(runner *oscommands.FakeCmdObjRunner, getRevParseArgs argFn) {
+				runner.ExpectGitArgs(
+					append(getRevParseArgs(), "--show-toplevel", "--absolute-git-dir", "--git-common-dir", "--show-superproject-working-tree"),
+					"",
+					errors.New("fatal: invalid gitfile format: /path/to/repo/worktree2/.git"))
+			},
+			Path:     "/path/to/repo/worktree2",
+			Expected: nil,
+			Err: func(getRevParseArgs argFn) error {
+				args := strings.Join(getRevParseArgs(), " ")
+				return errors.New(
+					fmt.Sprintf("'git %v --show-toplevel --absolute-git-dir --git-common-dir --show-superproject-working-tree' failed: fatal: invalid gitfile format: /path/to/repo/worktree2/.git", args),
+				)
+			},
+		},
 	}
 
 	for _, s := range scenarios {
 		s := s
 		t.Run(s.Name, func(t *testing.T) {
-			fs := afero.NewMemMapFs()
+			runner := oscommands.NewFakeRunner(t)
+			cmd := oscommands.NewDummyCmdObjBuilder(runner)
 
+			version, err := GetGitVersion(oscommands.NewDummyOSCommand())
+			if err != nil {
+				t.Fatal(err)
+			}
+
+			getRevParseArgs := func() []string {
+				args := []string{"rev-parse"}
+				if version.IsAtLeast(2, 31, 0) {
+					args = append(args, "--path-format=absolute")
+				}
+				return args
+			}
 			// prepare the filesystem for the scenario
-			s.BeforeFunc(fs)
+			s.BeforeFunc(runner, getRevParseArgs)
 
-			// run the function with the scenario path
-			repoPaths, err := getRepoPathsAux(fs, mockResolveSymlinkFn, s.Path)
+			repoPaths, err := GetRepoPaths(cmd, version)
 
 			// check the error and the paths
 			if s.Err != nil {
+				scenarioErr := s.Err(getRevParseArgs)
 				assert.Error(t, err)
-				assert.EqualError(t, err, s.Err.Error())
+				assert.EqualError(t, err, scenarioErr.Error())
 			} else {
 				assert.Nil(t, err)
 				assert.Equal(t, s.Expected, repoPaths)

pkg/commands/git_commands/stash.go

@@ -60,34 +60,35 @@ func (self *StashCommands) Push(message string) error {
 	return self.cmd.New(cmdArgs).Run()
 }
 
-func (self *StashCommands) Store(sha string, message string) error {
+func (self *StashCommands) Store(hash string, message string) error {
 	trimmedMessage := strings.Trim(message, " \t")
 
 	cmdArgs := NewGitCmd("stash").Arg("store").
 		ArgIf(trimmedMessage != "", "-m", trimmedMessage).
-		Arg(sha).
+		Arg(hash).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).Run()
 }
 
-func (self *StashCommands) Sha(index int) (string, error) {
+func (self *StashCommands) Hash(index int) (string, error) {
 	cmdArgs := NewGitCmd("rev-parse").
 		Arg(fmt.Sprintf("refs/stash@{%d}", index)).
 		ToArgv()
 
-	sha, _, err := self.cmd.New(cmdArgs).DontLog().RunWithOutputs()
-	return strings.Trim(sha, "\r\n"), err
+	hash, _, err := self.cmd.New(cmdArgs).DontLog().RunWithOutputs()
+	return strings.Trim(hash, "\r\n"), err
 }
 
-func (self *StashCommands) ShowStashEntryCmdObj(index int, ignoreWhitespace bool) oscommands.ICmdObj {
+func (self *StashCommands) ShowStashEntryCmdObj(index int) oscommands.ICmdObj {
 	cmdArgs := NewGitCmd("stash").Arg("show").
 		Arg("-p").
 		Arg("--stat").
 		Arg(fmt.Sprintf("--color=%s", self.UserConfig.Git.Paging.ColorArg)).
-		Arg(fmt.Sprintf("--unified=%d", self.UserConfig.Git.DiffContextSize)).
-		ArgIf(ignoreWhitespace, "--ignore-all-space").
+		Arg(fmt.Sprintf("--unified=%d", self.AppState.DiffContextSize)).
+		ArgIf(self.AppState.IgnoreWhitespaceInDiffView, "--ignore-all-space").
 		Arg(fmt.Sprintf("stash@{%d}", index)).
+		Dir(self.repoPaths.worktreePath).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).DontLog()
@@ -178,7 +179,7 @@ func (self *StashCommands) StashIncludeUntrackedChanges(message string) error {
 }
 
 func (self *StashCommands) Rename(index int, message string) error {
-	sha, err := self.Sha(index)
+	hash, err := self.Hash(index)
 	if err != nil {
 		return err
 	}
@@ -187,7 +188,7 @@ func (self *StashCommands) Rename(index int, message string) error {
 		return err
 	}
 
-	err = self.Store(sha, message)
+	err = self.Store(hash, message)
 	if err != nil {
 		return err
 	}

pkg/commands/git_commands/stash_loader.go

@@ -32,14 +32,14 @@ func (self *StashLoader) GetStashEntries(filterPath string) []*models.StashEntry
 		return self.getUnfilteredStashEntries()
 	}
 
-	cmdArgs := NewGitCmd("stash").Arg("list", "--name-only").ToArgv()
+	cmdArgs := NewGitCmd("stash").Arg("list", "-z", "--name-only", "--pretty=%ct|%gs").ToArgv()
 	rawString, err := self.cmd.New(cmdArgs).DontLog().RunWithOutput()
 	if err != nil {
 		return self.getUnfilteredStashEntries()
 	}
 	stashEntries := []*models.StashEntry{}
 	var currentStashEntry *models.StashEntry
-	lines := utils.SplitLines(rawString)
+	lines := utils.SplitNul(rawString)
 	isAStash := func(line string) bool { return strings.HasPrefix(line, "stash@{") }
 	re := regexp.MustCompile(`stash@\{(\d+)\}`)
 
@@ -66,7 +66,7 @@ outer:
 }
 
 func (self *StashLoader) getUnfilteredStashEntries() []*models.StashEntry {
-	cmdArgs := NewGitCmd("stash").Arg("list", "-z", "--pretty=%gs").ToArgv()
+	cmdArgs := NewGitCmd("stash").Arg("list", "-z", "--pretty=%ct|%gs").ToArgv()
 
 	rawString, _ := self.cmd.New(cmdArgs).DontLog().RunWithOutput()
 	return lo.Map(utils.SplitNul(rawString), func(line string, index int) *models.StashEntry {
@@ -75,8 +75,23 @@ func (self *StashLoader) getUnfilteredStashEntries() []*models.StashEntry {
 }
 
 func (c *StashLoader) stashEntryFromLine(line string, index int) *models.StashEntry {
-	return &models.StashEntry{
+	model := &models.StashEntry{
 		Name:  line,
 		Index: index,
 	}
+
+	tstr, msg, ok := strings.Cut(line, "|")
+	if !ok {
+		return model
+	}
+
+	t, err := strconv.ParseInt(tstr, 10, 64)
+	if err != nil {
+		return model
+	}
+
+	model.Name = msg
+	model.Recency = utils.UnixToTimeAgo(t)
+
+	return model
 }

pkg/commands/git_commands/stash_loader_test.go

@@ -22,14 +22,14 @@ func TestGetStashEntries(t *testing.T) {
 			"No stash entries found",
 			"",
 			oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"stash", "list", "-z", "--pretty=%gs"}, "", nil),
+				ExpectGitArgs([]string{"stash", "list", "-z", "--pretty=%ct|%gs"}, "", nil),
 			[]*models.StashEntry{},
 		},
 		{
 			"Several stash entries found",
 			"",
 			oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"stash", "list", "-z", "--pretty=%gs"},
+				ExpectGitArgs([]string{"stash", "list", "-z", "--pretty=%ct|%gs"},
 					"WIP on add-pkg-commands-test: 55c6af2 increase parallel build\x00WIP on master: bb86a3f update github template\x00",
 					nil,
 				),

pkg/commands/git_commands/stash_test.go

@@ -47,7 +47,7 @@ func TestStashSave(t *testing.T) {
 func TestStashStore(t *testing.T) {
 	type scenario struct {
 		testName string
-		sha      string
+		hash     string
 		message  string
 		expected []string
 	}
@@ -55,19 +55,19 @@ func TestStashStore(t *testing.T) {
 	scenarios := []scenario{
 		{
 			testName: "Non-empty message",
-			sha:      "0123456789abcdef",
+			hash:     "0123456789abcdef",
 			message:  "New stash name",
 			expected: []string{"stash", "store", "-m", "New stash name", "0123456789abcdef"},
 		},
 		{
 			testName: "Empty message",
-			sha:      "0123456789abcdef",
+			hash:     "0123456789abcdef",
 			message:  "",
 			expected: []string{"stash", "store", "0123456789abcdef"},
 		},
 		{
 			testName: "Space message",
-			sha:      "0123456789abcdef",
+			hash:     "0123456789abcdef",
 			message:  "  ",
 			expected: []string{"stash", "store", "0123456789abcdef"},
 		},
@@ -80,20 +80,20 @@ func TestStashStore(t *testing.T) {
 				ExpectGitArgs(s.expected, "", nil)
 			instance := buildStashCommands(commonDeps{runner: runner})
 
-			assert.NoError(t, instance.Store(s.sha, s.message))
+			assert.NoError(t, instance.Store(s.hash, s.message))
 			runner.CheckForMissingCalls()
 		})
 	}
 }
 
-func TestStashSha(t *testing.T) {
+func TestStashHash(t *testing.T) {
 	runner := oscommands.NewFakeRunner(t).
 		ExpectGitArgs([]string{"rev-parse", "refs/stash@{5}"}, "14d94495194651adfd5f070590df566c11d28243\n", nil)
 	instance := buildStashCommands(commonDeps{runner: runner})
 
-	sha, err := instance.Sha(5)
+	hash, err := instance.Hash(5)
 	assert.NoError(t, err)
-	assert.Equal(t, "14d94495194651adfd5f070590df566c11d28243", sha)
+	assert.Equal(t, "14d94495194651adfd5f070590df566c11d28243", hash)
 	runner.CheckForMissingCalls()
 }
 
@@ -112,21 +112,21 @@ func TestStashStashEntryCmdObj(t *testing.T) {
 			index:            5,
 			contextSize:      3,
 			ignoreWhitespace: false,
-			expected:         []string{"git", "stash", "show", "-p", "--stat", "--color=always", "--unified=3", "stash@{5}"},
+			expected:         []string{"git", "-C", "/path/to/worktree", "stash", "show", "-p", "--stat", "--color=always", "--unified=3", "stash@{5}"},
 		},
 		{
 			testName:         "Show diff with custom context size",
 			index:            5,
 			contextSize:      77,
 			ignoreWhitespace: false,
-			expected:         []string{"git", "stash", "show", "-p", "--stat", "--color=always", "--unified=77", "stash@{5}"},
+			expected:         []string{"git", "-C", "/path/to/worktree", "stash", "show", "-p", "--stat", "--color=always", "--unified=77", "stash@{5}"},
 		},
 		{
 			testName:         "Default case",
 			index:            5,
 			contextSize:      3,
 			ignoreWhitespace: true,
-			expected:         []string{"git", "stash", "show", "-p", "--stat", "--color=always", "--unified=3", "--ignore-all-space", "stash@{5}"},
+			expected:         []string{"git", "-C", "/path/to/worktree", "stash", "show", "-p", "--stat", "--color=always", "--unified=3", "--ignore-all-space", "stash@{5}"},
 		},
 	}
 
@@ -134,10 +134,15 @@ func TestStashStashEntryCmdObj(t *testing.T) {
 		s := s
 		t.Run(s.testName, func(t *testing.T) {
 			userConfig := config.GetDefaultConfig()
-			userConfig.Git.DiffContextSize = s.contextSize
-			instance := buildStashCommands(commonDeps{userConfig: userConfig})
+			appState := &config.AppState{}
+			appState.IgnoreWhitespaceInDiffView = s.ignoreWhitespace
+			appState.DiffContextSize = s.contextSize
+			repoPaths := RepoPaths{
+				worktreePath: "/path/to/worktree",
+			}
+			instance := buildStashCommands(commonDeps{userConfig: userConfig, appState: appState, repoPaths: &repoPaths})
 
-			cmdStr := instance.ShowStashEntryCmdObj(s.index, s.ignoreWhitespace).Args()
+			cmdStr := instance.ShowStashEntryCmdObj(s.index).Args()
 			assert.Equal(t, s.expected, cmdStr)
 		})
 	}
@@ -148,8 +153,8 @@ func TestStashRename(t *testing.T) {
 		testName         string
 		index            int
 		message          string
-		expectedShaCmd   []string
-		shaResult        string
+		expectedHashCmd  []string
+		hashResult       string
 		expectedDropCmd  []string
 		expectedStoreCmd []string
 	}
@@ -159,8 +164,8 @@ func TestStashRename(t *testing.T) {
 			testName:         "Default case",
 			index:            3,
 			message:          "New message",
-			expectedShaCmd:   []string{"rev-parse", "refs/stash@{3}"},
-			shaResult:        "f0d0f20f2f61ffd6d6bfe0752deffa38845a3edd\n",
+			expectedHashCmd:  []string{"rev-parse", "refs/stash@{3}"},
+			hashResult:       "f0d0f20f2f61ffd6d6bfe0752deffa38845a3edd\n",
 			expectedDropCmd:  []string{"stash", "drop", "stash@{3}"},
 			expectedStoreCmd: []string{"stash", "store", "-m", "New message", "f0d0f20f2f61ffd6d6bfe0752deffa38845a3edd"},
 		},
@@ -168,8 +173,8 @@ func TestStashRename(t *testing.T) {
 			testName:         "Empty message",
 			index:            4,
 			message:          "",
-			expectedShaCmd:   []string{"rev-parse", "refs/stash@{4}"},
-			shaResult:        "f0d0f20f2f61ffd6d6bfe0752deffa38845a3edd\n",
+			expectedHashCmd:  []string{"rev-parse", "refs/stash@{4}"},
+			hashResult:       "f0d0f20f2f61ffd6d6bfe0752deffa38845a3edd\n",
 			expectedDropCmd:  []string{"stash", "drop", "stash@{4}"},
 			expectedStoreCmd: []string{"stash", "store", "f0d0f20f2f61ffd6d6bfe0752deffa38845a3edd"},
 		},
@@ -179,7 +184,7 @@ func TestStashRename(t *testing.T) {
 		s := s
 		t.Run(s.testName, func(t *testing.T) {
 			runner := oscommands.NewFakeRunner(t).
-				ExpectGitArgs(s.expectedShaCmd, s.shaResult, nil).
+				ExpectGitArgs(s.expectedHashCmd, s.hashResult, nil).
 				ExpectGitArgs(s.expectedDropCmd, "", nil).
 				ExpectGitArgs(s.expectedStoreCmd, "", nil)
 			instance := buildStashCommands(commonDeps{runner: runner})

pkg/commands/git_commands/status.go

@@ -25,19 +25,16 @@ func NewStatusCommands(
 // RebaseMode returns "" for non-rebase mode, "normal" for normal rebase
 // and "interactive" for interactive rebase
 func (self *StatusCommands) RebaseMode() (enums.RebaseMode, error) {
-	exists, err := self.os.FileExists(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-apply"))
-	if err != nil {
-		return enums.REBASE_MODE_NONE, err
-	}
-	if exists {
+	ok, err := self.IsInNormalRebase()
+	if err == nil && ok {
 		return enums.REBASE_MODE_NORMAL, nil
 	}
-	exists, err = self.os.FileExists(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge"))
-	if exists {
+	ok, err = self.IsInInteractiveRebase()
+	if err == nil && ok {
 		return enums.REBASE_MODE_INTERACTIVE, err
-	} else {
-		return enums.REBASE_MODE_NONE, err
 	}
+
+	return enums.REBASE_MODE_NONE, err
 }
 
 func (self *StatusCommands) WorkingTreeState() enums.RebaseMode {
@@ -68,6 +65,14 @@ func IsBareRepo(osCommand *oscommands.OSCommand) (bool, error) {
 	return strconv.ParseBool(strings.TrimSpace(res))
 }
 
+func (self *StatusCommands) IsInNormalRebase() (bool, error) {
+	return self.os.FileExists(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-apply"))
+}
+
+func (self *StatusCommands) IsInInteractiveRebase() (bool, error) {
+	return self.os.FileExists(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "rebase-merge"))
+}
+
 // IsInMergeState states whether we are still mid-merge
 func (self *StatusCommands) IsInMergeState() (bool, error) {
 	return self.os.FileExists(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "MERGE_HEAD"))

pkg/commands/git_commands/submodule.go

@@ -26,8 +26,12 @@ func NewSubmoduleCommands(gitCommon *GitCommon) *SubmoduleCommands {
 	}
 }
 
-func (self *SubmoduleCommands) GetConfigs() ([]*models.SubmoduleConfig, error) {
-	file, err := os.Open(".gitmodules")
+func (self *SubmoduleCommands) GetConfigs(parentModule *models.SubmoduleConfig) ([]*models.SubmoduleConfig, error) {
+	gitModulesPath := ".gitmodules"
+	if parentModule != nil {
+		gitModulesPath = filepath.Join(parentModule.FullPath(), gitModulesPath)
+	}
+	file, err := os.Open(gitModulesPath)
 	if err != nil {
 		if os.IsNotExist(err) {
 			return nil, nil
@@ -51,21 +55,27 @@ func (self *SubmoduleCommands) GetConfigs() ([]*models.SubmoduleConfig, error) {
 	}
 
 	configs := []*models.SubmoduleConfig{}
+	lastConfigIdx := -1
 	for scanner.Scan() {
 		line := scanner.Text()
 
 		if name, ok := firstMatch(line, `\[submodule "(.*)"\]`); ok {
-			configs = append(configs, &models.SubmoduleConfig{Name: name})
+			configs = append(configs, &models.SubmoduleConfig{
+				Name: name, ParentModule: parentModule,
+			})
+			lastConfigIdx = len(configs) - 1
 			continue
 		}
 
-		if len(configs) > 0 {
-			lastConfig := configs[len(configs)-1]
-
+		if lastConfigIdx != -1 {
 			if path, ok := firstMatch(line, `\s*path\s*=\s*(.*)\s*`); ok {
-				lastConfig.Path = path
+				configs[lastConfigIdx].Path = path
+				nestedConfigs, err := self.GetConfigs(configs[lastConfigIdx])
+				if err == nil {
+					configs = append(configs, nestedConfigs...)
+				}
 			} else if url, ok := firstMatch(line, `\s*url\s*=\s*(.*)\s*`); ok {
-				lastConfig.Url = url
+				configs[lastConfigIdx].Url = url
 			}
 		}
 	}
@@ -77,12 +87,12 @@ func (self *SubmoduleCommands) Stash(submodule *models.SubmoduleConfig) error {
 	// if the path does not exist then it hasn't yet been initialized so we'll swallow the error
 	// because the intention here is to have no dirty worktree state
 	if _, err := os.Stat(submodule.Path); os.IsNotExist(err) {
-		self.Log.Infof("submodule path %s does not exist, returning", submodule.Path)
+		self.Log.Infof("submodule path %s does not exist, returning", submodule.FullPath())
 		return nil
 	}
 
 	cmdArgs := NewGitCmd("stash").
-		Dir(submodule.Path).
+		Dir(submodule.FullPath()).
 		Arg("--include-untracked").
 		ToArgv()
 
@@ -90,8 +100,13 @@ func (self *SubmoduleCommands) Stash(submodule *models.SubmoduleConfig) error {
 }
 
 func (self *SubmoduleCommands) Reset(submodule *models.SubmoduleConfig) error {
+	parentDir := ""
+	if submodule.ParentModule != nil {
+		parentDir = submodule.ParentModule.FullPath()
+	}
 	cmdArgs := NewGitCmd("submodule").
 		Arg("update", "--init", "--force", "--", submodule.Path).
+		DirIf(parentDir != "", parentDir).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).Run()
@@ -107,6 +122,20 @@ func (self *SubmoduleCommands) UpdateAll() error {
 func (self *SubmoduleCommands) Delete(submodule *models.SubmoduleConfig) error {
 	// based on https://gist.github.com/myusuf3/7f645819ded92bda6677
 
+	if submodule.ParentModule != nil {
+		wd, err := os.Getwd()
+		if err != nil {
+			return err
+		}
+
+		err = os.Chdir(submodule.ParentModule.FullPath())
+		if err != nil {
+			return err
+		}
+
+		defer func() { _ = os.Chdir(wd) }()
+	}
+
 	if err := self.cmd.New(
 		NewGitCmd("submodule").
 			Arg("deinit", "--force", "--", submodule.Path).ToArgv(),
@@ -141,7 +170,7 @@ func (self *SubmoduleCommands) Delete(submodule *models.SubmoduleConfig) error {
 
 	// We may in fact want to use the repo's git dir path but git docs say not to
 	// mix submodules and worktrees anyway.
-	return os.RemoveAll(filepath.Join(self.repoPaths.WorktreeGitDirPath(), "modules", submodule.Path))
+	return os.RemoveAll(submodule.GitDirPath(self.repoPaths.repoGitDirPath))
 }
 
 func (self *SubmoduleCommands) Add(name string, path string, url string) error {
@@ -158,10 +187,24 @@ func (self *SubmoduleCommands) Add(name string, path string, url string) error {
 	return self.cmd.New(cmdArgs).Run()
 }
 
-func (self *SubmoduleCommands) UpdateUrl(name string, path string, newUrl string) error {
+func (self *SubmoduleCommands) UpdateUrl(submodule *models.SubmoduleConfig, newUrl string) error {
+	if submodule.ParentModule != nil {
+		wd, err := os.Getwd()
+		if err != nil {
+			return err
+		}
+
+		err = os.Chdir(submodule.ParentModule.FullPath())
+		if err != nil {
+			return err
+		}
+
+		defer func() { _ = os.Chdir(wd) }()
+	}
+
 	setUrlCmdStr := NewGitCmd("config").
 		Arg(
-			"--file", ".gitmodules", "submodule."+name+".url", newUrl,
+			"--file", ".gitmodules", "submodule."+submodule.Name+".url", newUrl,
 		).
 		ToArgv()
 
@@ -170,7 +213,7 @@ func (self *SubmoduleCommands) UpdateUrl(name string, path string, newUrl string
 		return err
 	}
 
-	syncCmdStr := NewGitCmd("submodule").Arg("sync", "--", path).
+	syncCmdStr := NewGitCmd("submodule").Arg("sync", "--", submodule.Path).
 		ToArgv()
 
 	if err := self.cmd.New(syncCmdStr).Run(); err != nil {

pkg/commands/git_commands/sync.go

@@ -36,7 +36,7 @@ func (self *SyncCommands) PushCmdObj(task gocui.Task, opts PushOpts) (oscommands
 		ArgIf(opts.UpstreamBranch != "", opts.UpstreamBranch).
 		ToArgv()
 
-	cmdObj := self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).WithMutex(self.syncMutex)
+	cmdObj := self.cmd.New(cmdArgs).PromptOnCredentialRequest(task)
 	return cmdObj, nil
 }
 
@@ -49,10 +49,16 @@ func (self *SyncCommands) Push(task gocui.Task, opts PushOpts) error {
 	return cmdObj.Run()
 }
 
+func (self *SyncCommands) fetchCommandBuilder(fetchAll bool) *GitCommandBuilder {
+	return NewGitCmd("fetch").
+		ArgIf(fetchAll, "--all").
+		// avoid writing to .git/FETCH_HEAD; this allows running a pull
+		// concurrently without getting errors
+		ArgIf(self.version.IsAtLeast(2, 29, 0), "--no-write-fetch-head")
+}
+
 func (self *SyncCommands) FetchCmdObj(task gocui.Task) oscommands.ICmdObj {
-	cmdArgs := NewGitCmd("fetch").
-		ArgIf(self.UserConfig.Git.FetchAll, "--all").
-		ToArgv()
+	cmdArgs := self.fetchCommandBuilder(self.UserConfig.Git.FetchAll).ToArgv()
 
 	cmdObj := self.cmd.New(cmdArgs)
 	cmdObj.PromptOnCredentialRequest(task)
@@ -64,13 +70,10 @@ func (self *SyncCommands) Fetch(task gocui.Task) error {
 }
 
 func (self *SyncCommands) FetchBackgroundCmdObj() oscommands.ICmdObj {
-	cmdArgs := NewGitCmd("fetch").
-		ArgIf(self.UserConfig.Git.FetchAll, "--all").
-		ToArgv()
+	cmdArgs := self.fetchCommandBuilder(self.UserConfig.Git.FetchAll).ToArgv()
 
 	cmdObj := self.cmd.New(cmdArgs)
 	cmdObj.DontLog().FailOnCredentialRequest()
-	cmdObj.WithMutex(self.syncMutex)
 	return cmdObj
 }
 
@@ -96,7 +99,7 @@ func (self *SyncCommands) Pull(task gocui.Task, opts PullOptions) error {
 
 	// setting GIT_SEQUENCE_EDITOR to ':' as a way of skipping it, in case the user
 	// has 'pull.rebase = interactive' configured.
-	return self.cmd.New(cmdArgs).AddEnvVars("GIT_SEQUENCE_EDITOR=:").PromptOnCredentialRequest(task).WithMutex(self.syncMutex).Run()
+	return self.cmd.New(cmdArgs).AddEnvVars("GIT_SEQUENCE_EDITOR=:").PromptOnCredentialRequest(task).Run()
 }
 
 func (self *SyncCommands) FastForward(
@@ -105,18 +108,18 @@ func (self *SyncCommands) FastForward(
 	remoteName string,
 	remoteBranchName string,
 ) error {
-	cmdArgs := NewGitCmd("fetch").
+	cmdArgs := self.fetchCommandBuilder(false).
 		Arg(remoteName).
 		Arg(remoteBranchName + ":" + branchName).
 		ToArgv()
 
-	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).WithMutex(self.syncMutex).Run()
+	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).Run()
 }
 
 func (self *SyncCommands) FetchRemote(task gocui.Task, remoteName string) error {
-	cmdArgs := NewGitCmd("fetch").
+	cmdArgs := self.fetchCommandBuilder(false).
 		Arg(remoteName).
 		ToArgv()
 
-	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).WithMutex(self.syncMutex).Run()
+	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).Run()
 }

pkg/commands/git_commands/tag.go

@@ -41,7 +41,7 @@ func (self *TagCommands) HasTag(tagName string) bool {
 	return self.cmd.New(cmdArgs).Run() == nil
 }
 
-func (self *TagCommands) Delete(tagName string) error {
+func (self *TagCommands) LocalDelete(tagName string) error {
 	cmdArgs := NewGitCmd("tag").Arg("-d", tagName).
 		ToArgv()
 
@@ -52,5 +52,5 @@ func (self *TagCommands) Push(task gocui.Task, remoteName string, tagName string
 	cmdArgs := NewGitCmd("push").Arg(remoteName, "tag", tagName).
 		ToArgv()
 
-	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).WithMutex(self.syncMutex).Run()
+	return self.cmd.New(cmdArgs).PromptOnCredentialRequest(task).Run()
 }

pkg/commands/git_commands/version.go

@@ -69,3 +69,11 @@ func (v *GitVersion) IsOlderThan(major, minor, patch int) bool {
 func (v *GitVersion) IsOlderThanVersion(version *GitVersion) bool {
 	return v.IsOlderThan(version.Major, version.Minor, version.Patch)
 }
+
+func (v *GitVersion) IsAtLeast(major, minor, patch int) bool {
+	return !v.IsOlderThan(major, minor, patch)
+}
+
+func (v *GitVersion) IsAtLeastVersion(version *GitVersion) bool {
+	return v.IsAtLeast(version.Major, version.Minor, version.Patch)
+}

pkg/commands/git_commands/version_test.go

@@ -45,3 +45,12 @@ func TestGitVersionIsOlderThan(t *testing.T) {
 	assert.True(t, (&GitVersion{2, 0, 1, ""}).IsOlderThan(2, 1, 0))
 	assert.True(t, (&GitVersion{2, 0, 1, ""}).IsOlderThan(3, 0, 0))
 }
+
+func TestGitVersionIsAtLeast(t *testing.T) {
+	assert.True(t, (&GitVersion{2, 0, 0, ""}).IsAtLeast(1, 99, 99))
+	assert.True(t, (&GitVersion{2, 0, 0, ""}).IsAtLeast(2, 0, 0))
+	assert.True(t, (&GitVersion{2, 1, 0, ""}).IsAtLeast(2, 0, 9))
+
+	assert.False(t, (&GitVersion{2, 0, 1, ""}).IsAtLeast(2, 1, 0))
+	assert.False(t, (&GitVersion{2, 0, 1, ""}).IsAtLeast(3, 0, 0))
+}

pkg/commands/git_commands/working_tree.go

@@ -3,6 +3,7 @@ package git_commands
 import (
 	"fmt"
 	"os"
+	"path"
 
 	"github.com/go-errors/errors"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
@@ -31,10 +32,6 @@ func (self *WorkingTreeCommands) OpenMergeToolCmdObj() oscommands.ICmdObj {
 	return self.cmd.New(NewGitCmd("mergetool").ToArgv())
 }
 
-func (self *WorkingTreeCommands) OpenMergeTool() error {
-	return self.OpenMergeToolCmdObj().Run()
-}
-
 // StageFile stages a file
 func (self *WorkingTreeCommands) StageFile(path string) error {
 	return self.StageFiles([]string{path})
@@ -61,21 +58,20 @@ func (self *WorkingTreeCommands) UnstageAll() error {
 // UnStageFile unstages a file
 // we accept an array of filenames for the cases where a file has been renamed i.e.
 // we accept the current name and the previous name
-func (self *WorkingTreeCommands) UnStageFile(fileNames []string, reset bool) error {
-	for _, name := range fileNames {
-		var cmdArgs []string
-		if reset {
-			cmdArgs = NewGitCmd("reset").Arg("HEAD", "--", name).ToArgv()
-		} else {
-			cmdArgs = NewGitCmd("rm").Arg("--cached", "--force", "--", name).ToArgv()
-		}
-
-		err := self.cmd.New(cmdArgs).Run()
-		if err != nil {
-			return err
-		}
+func (self *WorkingTreeCommands) UnStageFile(paths []string, tracked bool) error {
+	if tracked {
+		return self.UnstageTrackedFiles(paths)
+	} else {
+		return self.UnstageUntrackedFiles(paths)
 	}
-	return nil
+}
+
+func (self *WorkingTreeCommands) UnstageTrackedFiles(paths []string) error {
+	return self.cmd.New(NewGitCmd("reset").Arg("HEAD", "--").Arg(paths...).ToArgv()).Run()
+}
+
+func (self *WorkingTreeCommands) UnstageUntrackedFiles(paths []string) error {
+	return self.cmd.New(NewGitCmd("rm").Arg("--cached", "--force", "--").Arg(paths...).ToArgv()).Run()
 }
 
 func (self *WorkingTreeCommands) BeforeAndAfterFileForRename(file *models.File) (*models.File, *models.File, error) {
@@ -169,6 +165,7 @@ func (self *WorkingTreeCommands) DiscardAllFileChanges(file *models.File) error
 	if file.Added {
 		return self.os.RemoveFile(file.Name)
 	}
+
 	return self.DiscardUnstagedFileChanges(file)
 }
 
@@ -176,6 +173,8 @@ type IFileNode interface {
 	ForEachFile(cb func(*models.File) error) error
 	GetFilePathsMatching(test func(*models.File) bool) []string
 	GetPath() string
+	// Returns file if the node is not a directory, otherwise returns nil
+	GetFile() *models.File
 }
 
 func (self *WorkingTreeCommands) DiscardAllDirChanges(node IFileNode) error {
@@ -184,13 +183,24 @@ func (self *WorkingTreeCommands) DiscardAllDirChanges(node IFileNode) error {
 }
 
 func (self *WorkingTreeCommands) DiscardUnstagedDirChanges(node IFileNode) error {
-	if err := self.RemoveUntrackedDirFiles(node); err != nil {
-		return err
-	}
+	file := node.GetFile()
+	if file == nil {
+		if err := self.RemoveUntrackedDirFiles(node); err != nil {
+			return err
+		}
 
-	cmdArgs := NewGitCmd("checkout").Arg("--", node.GetPath()).ToArgv()
-	if err := self.cmd.New(cmdArgs).Run(); err != nil {
-		return err
+		cmdArgs := NewGitCmd("checkout").Arg("--", node.GetPath()).ToArgv()
+		if err := self.cmd.New(cmdArgs).Run(); err != nil {
+			return err
+		}
+	} else {
+		if file.Added && !file.HasStagedChanges {
+			return self.os.RemoveFile(file.Name)
+		}
+
+		if err := self.DiscardUnstagedFileChanges(file); err != nil {
+			return err
+		}
 	}
 
 	return nil
@@ -211,7 +221,6 @@ func (self *WorkingTreeCommands) RemoveUntrackedDirFiles(node IFileNode) error {
 	return nil
 }
 
-// DiscardUnstagedFileChanges directly
 func (self *WorkingTreeCommands) DiscardUnstagedFileChanges(file *models.File) error {
 	cmdArgs := NewGitCmd("checkout").Arg("--", file.Name).ToArgv()
 	return self.cmd.New(cmdArgs).Run()
@@ -224,38 +233,43 @@ func (self *WorkingTreeCommands) Ignore(filename string) error {
 
 // Exclude adds a file to the .git/info/exclude for the repo
 func (self *WorkingTreeCommands) Exclude(filename string) error {
-	return self.os.AppendLineToFile(".git/info/exclude", filename)
+	excludeFile := path.Join(self.repoPaths.repoGitDirPath, "info", "exclude")
+	return self.os.AppendLineToFile(excludeFile, filename)
 }
 
 // WorktreeFileDiff returns the diff of a file
-func (self *WorkingTreeCommands) WorktreeFileDiff(file *models.File, plain bool, cached bool, ignoreWhitespace bool) string {
+func (self *WorkingTreeCommands) WorktreeFileDiff(file *models.File, plain bool, cached bool) string {
 	// for now we assume an error means the file was deleted
-	s, _ := self.WorktreeFileDiffCmdObj(file, plain, cached, ignoreWhitespace).RunWithOutput()
+	s, _ := self.WorktreeFileDiffCmdObj(file, plain, cached).RunWithOutput()
 	return s
 }
 
-func (self *WorkingTreeCommands) WorktreeFileDiffCmdObj(node models.IFile, plain bool, cached bool, ignoreWhitespace bool) oscommands.ICmdObj {
+func (self *WorkingTreeCommands) WorktreeFileDiffCmdObj(node models.IFile, plain bool, cached bool) oscommands.ICmdObj {
 	colorArg := self.UserConfig.Git.Paging.ColorArg
 	if plain {
 		colorArg = "never"
 	}
 
-	contextSize := self.UserConfig.Git.DiffContextSize
+	contextSize := self.AppState.DiffContextSize
 	prevPath := node.GetPreviousPath()
 	noIndex := !node.GetIsTracked() && !node.GetHasStagedChanges() && !cached && node.GetIsFile()
+	extDiffCmd := self.UserConfig.Git.Paging.ExternalDiffCommand
+	useExtDiff := extDiffCmd != "" && !plain
 
 	cmdArgs := NewGitCmd("diff").
+		ConfigIf(useExtDiff, "diff.external="+extDiffCmd).
+		ArgIfElse(useExtDiff, "--ext-diff", "--no-ext-diff").
 		Arg("--submodule").
-		Arg("--no-ext-diff").
 		Arg(fmt.Sprintf("--unified=%d", contextSize)).
 		Arg(fmt.Sprintf("--color=%s", colorArg)).
-		ArgIf(ignoreWhitespace, "--ignore-all-space").
+		ArgIf(!plain && self.AppState.IgnoreWhitespaceInDiffView, "--ignore-all-space").
 		ArgIf(cached, "--cached").
 		ArgIf(noIndex, "--no-index").
 		Arg("--").
 		ArgIf(noIndex, "/dev/null").
 		Arg(node.GetPath()).
 		ArgIf(prevPath != "", prevPath).
+		Dir(self.repoPaths.worktreePath).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).DontLog()
@@ -263,42 +277,44 @@ func (self *WorkingTreeCommands) WorktreeFileDiffCmdObj(node models.IFile, plain
 
 // ShowFileDiff get the diff of specified from and to. Typically this will be used for a single commit so it'll be 123abc^..123abc
 // but when we're in diff mode it could be any 'from' to any 'to'. The reverse flag is also here thanks to diff mode.
-func (self *WorkingTreeCommands) ShowFileDiff(from string, to string, reverse bool, fileName string, plain bool,
-	ignoreWhitespace bool,
-) (string, error) {
-	return self.ShowFileDiffCmdObj(from, to, reverse, fileName, plain, ignoreWhitespace).RunWithOutput()
+func (self *WorkingTreeCommands) ShowFileDiff(from string, to string, reverse bool, fileName string, plain bool) (string, error) {
+	return self.ShowFileDiffCmdObj(from, to, reverse, fileName, plain).RunWithOutput()
 }
 
-func (self *WorkingTreeCommands) ShowFileDiffCmdObj(from string, to string, reverse bool, fileName string, plain bool,
-	ignoreWhitespace bool,
-) oscommands.ICmdObj {
-	contextSize := self.UserConfig.Git.DiffContextSize
+func (self *WorkingTreeCommands) ShowFileDiffCmdObj(from string, to string, reverse bool, fileName string, plain bool) oscommands.ICmdObj {
+	contextSize := self.AppState.DiffContextSize
 
 	colorArg := self.UserConfig.Git.Paging.ColorArg
 	if plain {
 		colorArg = "never"
 	}
 
+	extDiffCmd := self.UserConfig.Git.Paging.ExternalDiffCommand
+	useExtDiff := extDiffCmd != "" && !plain
+
 	cmdArgs := NewGitCmd("diff").
+		Config("diff.noprefix=false").
+		ConfigIf(useExtDiff, "diff.external="+extDiffCmd).
+		ArgIfElse(useExtDiff, "--ext-diff", "--no-ext-diff").
 		Arg("--submodule").
-		Arg("--no-ext-diff").
 		Arg(fmt.Sprintf("--unified=%d", contextSize)).
 		Arg("--no-renames").
 		Arg(fmt.Sprintf("--color=%s", colorArg)).
 		Arg(from).
 		Arg(to).
 		ArgIf(reverse, "-R").
-		ArgIf(ignoreWhitespace, "--ignore-all-space").
+		ArgIf(!plain && self.AppState.IgnoreWhitespaceInDiffView, "--ignore-all-space").
 		Arg("--").
 		Arg(fileName).
+		Dir(self.repoPaths.worktreePath).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).DontLog()
 }
 
 // CheckoutFile checks out the file for the given commit
-func (self *WorkingTreeCommands) CheckoutFile(commitSha, fileName string) error {
-	cmdArgs := NewGitCmd("checkout").Arg(commitSha, "--", fileName).
+func (self *WorkingTreeCommands) CheckoutFile(commitHash, fileName string) error {
+	cmdArgs := NewGitCmd("checkout").Arg(commitHash, "--", fileName).
 		ToArgv()
 
 	return self.cmd.New(cmdArgs).Run()
@@ -329,7 +345,7 @@ func (self *WorkingTreeCommands) RemoveUntrackedFiles() error {
 
 // ResetAndClean removes all unstaged changes and removes all untracked files
 func (self *WorkingTreeCommands) ResetAndClean() error {
-	submoduleConfigs, err := self.submodule.GetConfigs()
+	submoduleConfigs, err := self.submodule.GetConfigs(nil)
 	if err != nil {
 		return err
 	}

pkg/commands/git_commands/working_tree_test.go

@@ -231,7 +231,7 @@ func TestWorkingTreeDiff(t *testing.T) {
 			ignoreWhitespace: false,
 			contextSize:      3,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=3", "--color=always", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "diff", "--no-ext-diff", "--submodule", "--unified=3", "--color=always", "--", "test.txt"}, expectedResult, nil),
 		},
 		{
 			testName: "cached",
@@ -245,7 +245,7 @@ func TestWorkingTreeDiff(t *testing.T) {
 			ignoreWhitespace: false,
 			contextSize:      3,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=3", "--color=always", "--cached", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "diff", "--no-ext-diff", "--submodule", "--unified=3", "--color=always", "--cached", "--", "test.txt"}, expectedResult, nil),
 		},
 		{
 			testName: "plain",
@@ -259,7 +259,7 @@ func TestWorkingTreeDiff(t *testing.T) {
 			ignoreWhitespace: false,
 			contextSize:      3,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=3", "--color=never", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "diff", "--no-ext-diff", "--submodule", "--unified=3", "--color=never", "--", "test.txt"}, expectedResult, nil),
 		},
 		{
 			testName: "File not tracked and file has no staged changes",
@@ -273,7 +273,7 @@ func TestWorkingTreeDiff(t *testing.T) {
 			ignoreWhitespace: false,
 			contextSize:      3,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=3", "--color=always", "--no-index", "--", "/dev/null", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "diff", "--no-ext-diff", "--submodule", "--unified=3", "--color=always", "--no-index", "--", "/dev/null", "test.txt"}, expectedResult, nil),
 		},
 		{
 			testName: "Default case (ignore whitespace)",
@@ -287,7 +287,7 @@ func TestWorkingTreeDiff(t *testing.T) {
 			ignoreWhitespace: true,
 			contextSize:      3,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=3", "--color=always", "--ignore-all-space", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "diff", "--no-ext-diff", "--submodule", "--unified=3", "--color=always", "--ignore-all-space", "--", "test.txt"}, expectedResult, nil),
 		},
 		{
 			testName: "Show diff with custom context size",
@@ -301,7 +301,7 @@ func TestWorkingTreeDiff(t *testing.T) {
 			ignoreWhitespace: false,
 			contextSize:      17,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=17", "--color=always", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "diff", "--no-ext-diff", "--submodule", "--unified=17", "--color=always", "--", "test.txt"}, expectedResult, nil),
 		},
 	}
 
@@ -309,10 +309,15 @@ func TestWorkingTreeDiff(t *testing.T) {
 		s := s
 		t.Run(s.testName, func(t *testing.T) {
 			userConfig := config.GetDefaultConfig()
-			userConfig.Git.DiffContextSize = s.contextSize
+			appState := &config.AppState{}
+			appState.IgnoreWhitespaceInDiffView = s.ignoreWhitespace
+			appState.DiffContextSize = s.contextSize
+			repoPaths := RepoPaths{
+				worktreePath: "/path/to/worktree",
+			}
 
-			instance := buildWorkingTreeCommands(commonDeps{runner: s.runner, userConfig: userConfig})
-			result := instance.WorktreeFileDiff(s.file, s.plain, s.cached, s.ignoreWhitespace)
+			instance := buildWorkingTreeCommands(commonDeps{runner: s.runner, userConfig: userConfig, appState: appState, repoPaths: &repoPaths})
+			result := instance.WorktreeFileDiff(s.file, s.plain, s.cached)
 			assert.Equal(t, expectedResult, result)
 			s.runner.CheckForMissingCalls()
 		})
@@ -343,7 +348,7 @@ func TestWorkingTreeShowFileDiff(t *testing.T) {
 			ignoreWhitespace: false,
 			contextSize:      3,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=3", "--no-renames", "--color=always", "1234567890", "0987654321", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "-c", "diff.noprefix=false", "diff", "--no-ext-diff", "--submodule", "--unified=3", "--no-renames", "--color=always", "1234567890", "0987654321", "--", "test.txt"}, expectedResult, nil),
 		},
 		{
 			testName:         "Show diff with custom context size",
@@ -354,7 +359,7 @@ func TestWorkingTreeShowFileDiff(t *testing.T) {
 			ignoreWhitespace: false,
 			contextSize:      123,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=123", "--no-renames", "--color=always", "1234567890", "0987654321", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "-c", "diff.noprefix=false", "diff", "--no-ext-diff", "--submodule", "--unified=123", "--no-renames", "--color=always", "1234567890", "0987654321", "--", "test.txt"}, expectedResult, nil),
 		},
 		{
 			testName:         "Default case (ignore whitespace)",
@@ -365,7 +370,7 @@ func TestWorkingTreeShowFileDiff(t *testing.T) {
 			ignoreWhitespace: true,
 			contextSize:      3,
 			runner: oscommands.NewFakeRunner(t).
-				ExpectGitArgs([]string{"diff", "--submodule", "--no-ext-diff", "--unified=3", "--no-renames", "--color=always", "1234567890", "0987654321", "--ignore-all-space", "--", "test.txt"}, expectedResult, nil),
+				ExpectGitArgs([]string{"-C", "/path/to/worktree", "-c", "diff.noprefix=false", "diff", "--no-ext-diff", "--submodule", "--unified=3", "--no-renames", "--color=always", "1234567890", "0987654321", "--ignore-all-space", "--", "test.txt"}, expectedResult, nil),
 		},
 	}
 
@@ -373,11 +378,16 @@ func TestWorkingTreeShowFileDiff(t *testing.T) {
 		s := s
 		t.Run(s.testName, func(t *testing.T) {
 			userConfig := config.GetDefaultConfig()
-			userConfig.Git.DiffContextSize = s.contextSize
+			appState := &config.AppState{}
+			appState.IgnoreWhitespaceInDiffView = s.ignoreWhitespace
+			appState.DiffContextSize = s.contextSize
+			repoPaths := RepoPaths{
+				worktreePath: "/path/to/worktree",
+			}
 
-			instance := buildWorkingTreeCommands(commonDeps{runner: s.runner, userConfig: userConfig})
+			instance := buildWorkingTreeCommands(commonDeps{runner: s.runner, userConfig: userConfig, appState: appState, repoPaths: &repoPaths})
 
-			result, err := instance.ShowFileDiff(s.from, s.to, s.reverse, "test.txt", s.plain, s.ignoreWhitespace)
+			result, err := instance.ShowFileDiff(s.from, s.to, s.reverse, "test.txt", s.plain)
 			assert.NoError(t, err)
 			assert.Equal(t, expectedResult, result)
 			s.runner.CheckForMissingCalls()
@@ -387,18 +397,18 @@ func TestWorkingTreeShowFileDiff(t *testing.T) {
 
 func TestWorkingTreeCheckoutFile(t *testing.T) {
 	type scenario struct {
-		testName  string
-		commitSha string
-		fileName  string
-		runner    *oscommands.FakeCmdObjRunner
-		test      func(error)
+		testName   string
+		commitHash string
+		fileName   string
+		runner     *oscommands.FakeCmdObjRunner
+		test       func(error)
 	}
 
 	scenarios := []scenario{
 		{
-			testName:  "typical case",
-			commitSha: "11af912",
-			fileName:  "test999.txt",
+			testName:   "typical case",
+			commitHash: "11af912",
+			fileName:   "test999.txt",
 			runner: oscommands.NewFakeRunner(t).
 				ExpectGitArgs([]string{"checkout", "11af912", "--", "test999.txt"}, "", nil),
 			test: func(err error) {
@@ -406,9 +416,9 @@ func TestWorkingTreeCheckoutFile(t *testing.T) {
 			},
 		},
 		{
-			testName:  "returns error if there is one",
-			commitSha: "11af912",
-			fileName:  "test999.txt",
+			testName:   "returns error if there is one",
+			commitHash: "11af912",
+			fileName:   "test999.txt",
 			runner: oscommands.NewFakeRunner(t).
 				ExpectGitArgs([]string{"checkout", "11af912", "--", "test999.txt"}, "", errors.New("error")),
 			test: func(err error) {
@@ -422,7 +432,7 @@ func TestWorkingTreeCheckoutFile(t *testing.T) {
 		t.Run(s.testName, func(t *testing.T) {
 			instance := buildWorkingTreeCommands(commonDeps{runner: s.runner})
 
-			s.test(instance.CheckoutFile(s.commitSha, s.fileName))
+			s.test(instance.CheckoutFile(s.commitHash, s.fileName))
 			s.runner.CheckForMissingCalls()
 		})
 	}

pkg/commands/git_commands/worktree_loader.go

@@ -4,6 +4,7 @@ import (
 	iofs "io/fs"
 	"path/filepath"
 	"strings"
+	"sync"
 
 	"github.com/go-errors/errors"
 	"github.com/jesseduffield/lazygit/pkg/commands/models"
@@ -57,18 +58,14 @@ func (self *WorktreeLoader) GetWorktrees() ([]*models.Worktree, error) {
 			isCurrent := path == worktreePath
 			isPathMissing := self.pathExists(path)
 
-			var gitDir string
-			gitDir, err := worktreeGitDirPath(self.Fs, path)
-			if err != nil {
-				self.Log.Warnf("Could not find git dir for worktree %s: %v", path, err)
-			}
-
 			current = &models.Worktree{
 				IsMain:        isMain,
 				IsCurrent:     isCurrent,
 				IsPathMissing: isPathMissing,
 				Path:          path,
-				GitDir:        gitDir,
+				// we defer populating GitDir until a loop below so that
+				// we can parallelize the calls to git rev-parse
+				GitDir: "",
 			}
 		} else if strings.HasPrefix(splitLine, "branch ") {
 			branch := strings.SplitN(splitLine, " ", 2)[1]
@@ -76,6 +73,28 @@ func (self *WorktreeLoader) GetWorktrees() ([]*models.Worktree, error) {
 		}
 	}
 
+	wg := sync.WaitGroup{}
+	wg.Add(len(worktrees))
+	for _, worktree := range worktrees {
+		worktree := worktree
+
+		go utils.Safe(func() {
+			defer wg.Done()
+
+			if worktree.IsPathMissing {
+				return
+			}
+			gitDir, err := callGitRevParseWithDir(self.cmd, self.version, worktree.Path, "--absolute-git-dir")
+			if err != nil {
+				self.Log.Warnf("Could not find git dir for worktree %s: %v", worktree.Path, err)
+				return
+			}
+
+			worktree.GitDir = gitDir
+		})
+	}
+	wg.Wait()
+
 	names := getUniqueNamesFromPaths(lo.Map(worktrees, func(worktree *models.Worktree, _ int) string {
 		return worktree.Path
 	}))

pkg/commands/git_commands/worktree_loader_test.go

@@ -14,7 +14,7 @@ func TestGetWorktrees(t *testing.T) {
 	type scenario struct {
 		testName          string
 		repoPaths         *RepoPaths
-		before            func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs)
+		before            func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs, getRevParseArgs argFn)
 		expectedWorktrees []*models.Worktree
 		expectedErr       string
 	}
@@ -26,7 +26,7 @@ func TestGetWorktrees(t *testing.T) {
 				repoPath:     "/path/to/repo",
 				worktreePath: "/path/to/repo",
 			},
-			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs) {
+			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs, getRevParseArgs argFn) {
 				runner.ExpectGitArgs([]string{"worktree", "list", "--porcelain"},
 					`worktree /path/to/repo
 HEAD d85cc9d281fa6ae1665c68365fc70e75e82a042d
@@ -34,6 +34,8 @@ branch refs/heads/mybranch
 `,
 					nil)
 
+				gitArgsMainWorktree := append(append([]string{"-C", "/path/to/repo"}, getRevParseArgs()...), "--absolute-git-dir")
+				runner.ExpectGitArgs(gitArgsMainWorktree, "/path/to/repo/.git", nil)
 				_ = fs.MkdirAll("/path/to/repo/.git", 0o755)
 			},
 			expectedWorktrees: []*models.Worktree{
@@ -55,7 +57,7 @@ branch refs/heads/mybranch
 				repoPath:     "/path/to/repo",
 				worktreePath: "/path/to/repo",
 			},
-			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs) {
+			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs, getRevParseArgs argFn) {
 				runner.ExpectGitArgs([]string{"worktree", "list", "--porcelain"},
 					`worktree /path/to/repo
 HEAD d85cc9d281fa6ae1665c68365fc70e75e82a042d
@@ -66,6 +68,10 @@ HEAD 775955775e79b8f5b4c4b56f82fbf657e2d5e4de
 branch refs/heads/mybranch-worktree
 `,
 					nil)
+				gitArgsMainWorktree := append(append([]string{"-C", "/path/to/repo"}, getRevParseArgs()...), "--absolute-git-dir")
+				runner.ExpectGitArgs(gitArgsMainWorktree, "/path/to/repo/.git", nil)
+				gitArgsLinkedWorktree := append(append([]string{"-C", "/path/to/repo-worktree"}, getRevParseArgs()...), "--absolute-git-dir")
+				runner.ExpectGitArgs(gitArgsLinkedWorktree, "/path/to/repo/.git/worktrees/repo-worktree", nil)
 
 				_ = fs.MkdirAll("/path/to/repo/.git", 0o755)
 				_ = fs.MkdirAll("/path/to/repo-worktree", 0o755)
@@ -100,7 +106,7 @@ branch refs/heads/mybranch-worktree
 				repoPath:     "/path/to/repo",
 				worktreePath: "/path/to/repo",
 			},
-			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs) {
+			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs, getRevParseArgs argFn) {
 				runner.ExpectGitArgs([]string{"worktree", "list", "--porcelain"},
 					`worktree /path/to/worktree
 HEAD 775955775e79b8f5b4c4b56f82fbf657e2d5e4de
@@ -129,7 +135,7 @@ branch refs/heads/missingbranch
 				repoPath:     "/path/to/repo",
 				worktreePath: "/path/to/repo-worktree",
 			},
-			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs) {
+			before: func(runner *oscommands.FakeCmdObjRunner, fs afero.Fs, getRevParseArgs argFn) {
 				runner.ExpectGitArgs([]string{"worktree", "list", "--porcelain"},
 					`worktree /path/to/repo
 HEAD d85cc9d281fa6ae1665c68365fc70e75e82a042d
@@ -140,6 +146,10 @@ HEAD 775955775e79b8f5b4c4b56f82fbf657e2d5e4de
 branch refs/heads/mybranch-worktree
 `,
 					nil)
+				gitArgsMainWorktree := append(append([]string{"-C", "/path/to/repo"}, getRevParseArgs()...), "--absolute-git-dir")
+				runner.ExpectGitArgs(gitArgsMainWorktree, "/path/to/repo/.git", nil)
+				gitArgsLinkedWorktree := append(append([]string{"-C", "/path/to/repo-worktree"}, getRevParseArgs()...), "--absolute-git-dir")
+				runner.ExpectGitArgs(gitArgsLinkedWorktree, "/path/to/repo/.git/worktrees/repo-worktree", nil)
 
 				_ = fs.MkdirAll("/path/to/repo/.git", 0o755)
 				_ = fs.MkdirAll("/path/to/repo-worktree", 0o755)
@@ -175,10 +185,23 @@ branch refs/heads/mybranch-worktree
 		t.Run(s.testName, func(t *testing.T) {
 			runner := oscommands.NewFakeRunner(t)
 			fs := afero.NewMemMapFs()
-			s.before(runner, fs)
+			version, err := GetGitVersion(oscommands.NewDummyOSCommand())
+			if err != nil {
+				t.Fatal(err)
+			}
+
+			getRevParseArgs := func() []string {
+				args := []string{"rev-parse"}
+				if version.IsAtLeast(2, 31, 0) {
+					args = append(args, "--path-format=absolute")
+				}
+				return args
+			}
+
+			s.before(runner, fs, getRevParseArgs)
 
 			loader := &WorktreeLoader{
-				GitCommon: buildGitCommon(commonDeps{runner: runner, fs: fs, repoPaths: s.repoPaths}),
+				GitCommon: buildGitCommon(commonDeps{runner: runner, fs: fs, repoPaths: s.repoPaths, gitVersion: version}),
 			}
 
 			worktrees, err := loader.GetWorktrees()
@@ -186,7 +209,7 @@ branch refs/heads/mybranch-worktree
 				assert.EqualError(t, errors.New(s.expectedErr), err.Error())
 			} else {
 				assert.NoError(t, err)
-				assert.EqualValues(t, worktrees, s.expectedWorktrees)
+				assert.EqualValues(t, s.expectedWorktrees, worktrees)
 			}
 		})
 	}

pkg/commands/git_test.go

@@ -1,74 +0,0 @@
-package commands
-
-import (
-	"testing"
-
-	"github.com/go-errors/errors"
-	"github.com/spf13/afero"
-	"github.com/stretchr/testify/assert"
-)
-
-func TestFindWorktreeRoot(t *testing.T) {
-	type scenario struct {
-		testName     string
-		currentPath  string
-		before       func(fs afero.Fs)
-		expectedPath string
-		expectedErr  string
-	}
-
-	scenarios := []scenario{
-		{
-			testName:    "at root of worktree",
-			currentPath: "/path/to/repo",
-			before: func(fs afero.Fs) {
-				_ = fs.MkdirAll("/path/to/repo/.git", 0o755)
-			},
-			expectedPath: "/path/to/repo",
-			expectedErr:  "",
-		},
-		{
-			testName:    "inside worktree",
-			currentPath: "/path/to/repo/subdir",
-			before: func(fs afero.Fs) {
-				_ = fs.MkdirAll("/path/to/repo/.git", 0o755)
-				_ = fs.MkdirAll("/path/to/repo/subdir", 0o755)
-			},
-			expectedPath: "/path/to/repo",
-			expectedErr:  "",
-		},
-		{
-			testName:     "not in a git repo",
-			currentPath:  "/path/to/dir",
-			before:       func(fs afero.Fs) {},
-			expectedPath: "",
-			expectedErr:  "Must open lazygit in a git repository",
-		},
-		{
-			testName:    "In linked worktree",
-			currentPath: "/path/to/worktree",
-			before: func(fs afero.Fs) {
-				_ = fs.MkdirAll("/path/to/worktree", 0o755)
-				_ = afero.WriteFile(fs, "/path/to/worktree/.git", []byte("blah"), 0o755)
-			},
-			expectedPath: "/path/to/worktree",
-			expectedErr:  "",
-		},
-	}
-
-	for _, s := range scenarios {
-		s := s
-		t.Run(s.testName, func(t *testing.T) {
-			fs := afero.NewMemMapFs()
-			s.before(fs)
-
-			root, err := findWorktreeRoot(fs, s.currentPath)
-			if s.expectedErr != "" {
-				assert.EqualError(t, errors.New(s.expectedErr), err.Error())
-			} else {
-				assert.NoError(t, err)
-				assert.Equal(t, s.expectedPath, root)
-			}
-		})
-	}
-}

pkg/commands/hosting_service/definitions.go

@@ -14,7 +14,7 @@ var githubServiceDef = ServiceDefinition{
 	provider:                        "github",
 	pullRequestURLIntoDefaultBranch: "/compare/{{.From}}?expand=1",
 	pullRequestURLIntoTargetBranch:  "/compare/{{.To}}...{{.From}}?expand=1",
-	commitURL:                       "/commit/{{.CommitSha}}",
+	commitURL:                       "/commit/{{.CommitHash}}",
 	regexStrings:                    defaultUrlRegexStrings,
 	repoURLTemplate:                 defaultRepoURLTemplate,
 }
@@ -23,7 +23,7 @@ var bitbucketServiceDef = ServiceDefinition{
 	provider:                        "bitbucket",
 	pullRequestURLIntoDefaultBranch: "/pull-requests/new?source={{.From}}&t=1",
 	pullRequestURLIntoTargetBranch:  "/pull-requests/new?source={{.From}}&dest={{.To}}&t=1",
-	commitURL:                       "/commits/{{.CommitSha}}",
+	commitURL:                       "/commits/{{.CommitHash}}",
 	regexStrings: []string{
 		`^(?:https?|ssh)://.*/(?P<owner>.*)/(?P<repo>.*?)(?:\.git)?$`,
 		`^.*@.*:(?P<owner>.*)/(?P<repo>.*?)(?:\.git)?$`,
@@ -35,7 +35,7 @@ var gitLabServiceDef = ServiceDefinition{
 	provider:                        "gitlab",
 	pullRequestURLIntoDefaultBranch: "/-/merge_requests/new?merge_request[source_branch]={{.From}}",
 	pullRequestURLIntoTargetBranch:  "/-/merge_requests/new?merge_request[source_branch]={{.From}}&merge_request[target_branch]={{.To}}",
-	commitURL:                       "/-/commit/{{.CommitSha}}",
+	commitURL:                       "/-/commit/{{.CommitHash}}",
 	regexStrings:                    defaultUrlRegexStrings,
 	repoURLTemplate:                 defaultRepoURLTemplate,
 }
@@ -44,7 +44,7 @@ var azdoServiceDef = ServiceDefinition{
 	provider:                        "azuredevops",
 	pullRequestURLIntoDefaultBranch: "/pullrequestcreate?sourceRef={{.From}}",
 	pullRequestURLIntoTargetBranch:  "/pullrequestcreate?sourceRef={{.From}}&targetRef={{.To}}",
-	commitURL:                       "/commit/{{.CommitSha}}",
+	commitURL:                       "/commit/{{.CommitHash}}",
 	regexStrings: []string{
 		`^git@ssh.dev.azure.com.*/(?P<org>.*)/(?P<project>.*)/(?P<repo>.*?)(?:\.git)?$`,
 		`^https://.*@dev.azure.com/(?P<org>.*?)/(?P<project>.*?)/_git/(?P<repo>.*?)(?:\.git)?$`,
@@ -56,7 +56,7 @@ var bitbucketServerServiceDef = ServiceDefinition{
 	provider:                        "bitbucketServer",
 	pullRequestURLIntoDefaultBranch: "/pull-requests?create&sourceBranch={{.From}}",
 	pullRequestURLIntoTargetBranch:  "/pull-requests?create&targetBranch={{.To}}&sourceBranch={{.From}}",
-	commitURL:                       "/commits/{{.CommitSha}}",
+	commitURL:                       "/commits/{{.CommitHash}}",
 	regexStrings: []string{
 		`^ssh://git@.*/(?P<project>.*)/(?P<repo>.*?)(?:\.git)?$`,
 		`^https://.*/scm/(?P<project>.*)/(?P<repo>.*?)(?:\.git)?$`,
@@ -68,7 +68,7 @@ var giteaServiceDef = ServiceDefinition{
 	provider:                        "gitea",
 	pullRequestURLIntoDefaultBranch: "/compare/{{.From}}",
 	pullRequestURLIntoTargetBranch:  "/compare/{{.To}}...{{.From}}",
-	commitURL:                       "/commit/{{.CommitSha}}",
+	commitURL:                       "/commit/{{.CommitHash}}",
 	regexStrings:                    defaultUrlRegexStrings,
 	repoURLTemplate:                 defaultRepoURLTemplate,
 }

pkg/commands/hosting_service/hosting_service.go

@@ -51,13 +51,13 @@ func (self *HostingServiceMgr) GetPullRequestURL(from string, to string) (string
 	}
 }
 
-func (self *HostingServiceMgr) GetCommitURL(commitSha string) (string, error) {
+func (self *HostingServiceMgr) GetCommitURL(commitHash string) (string, error) {
 	gitService, err := self.getService()
 	if err != nil {
 		return "", err
 	}
 
-	pullRequestURL := gitService.getCommitURL(commitSha)
+	pullRequestURL := gitService.getCommitURL(commitHash)
 
 	return pullRequestURL, nil
 }
@@ -99,33 +99,30 @@ func (self *HostingServiceMgr) getCandidateServiceDomains() []ServiceDomain {
 
 	serviceDomains := slices.Clone(defaultServiceDomains)
 
-	if len(self.configServiceDomains) > 0 {
-		for gitDomain, typeAndDomain := range self.configServiceDomains {
-			splitData := strings.Split(typeAndDomain, ":")
-			if len(splitData) != 2 {
-				self.log.Errorf("Unexpected format for git service: '%s'. Expected something like 'github.com:github.com'", typeAndDomain)
-				continue
-			}
+	for gitDomain, typeAndDomain := range self.configServiceDomains {
+		provider, webDomain, success := strings.Cut(typeAndDomain, ":")
 
-			provider := splitData[0]
-			webDomain := splitData[1]
-
-			serviceDefinition, ok := serviceDefinitionByProvider[provider]
-			if !ok {
-				providerNames := lo.Map(serviceDefinitions, func(serviceDefinition ServiceDefinition, _ int) string {
-					return serviceDefinition.provider
-				})
-
-				self.log.Errorf("Unknown git service type: '%s'. Expected one of %s", provider, strings.Join(providerNames, ", "))
-				continue
-			}
-
-			serviceDomains = append(serviceDomains, ServiceDomain{
-				gitDomain:         gitDomain,
-				webDomain:         webDomain,
-				serviceDefinition: serviceDefinition,
-			})
+		// we allow for one ':' for specifying the TCP port
+		if !success || strings.Count(webDomain, ":") > 1 {
+			self.log.Errorf("Unexpected format for git service: '%s'. Expected something like 'github.com:github.com'", typeAndDomain)
+			continue
 		}
+
+		serviceDefinition, ok := serviceDefinitionByProvider[provider]
+		if !ok {
+			providerNames := lo.Map(serviceDefinitions, func(serviceDefinition ServiceDefinition, _ int) string {
+				return serviceDefinition.provider
+			})
+
+			self.log.Errorf("Unknown git service type: '%s'. Expected one of %s", provider, strings.Join(providerNames, ", "))
+			continue
+		}
+
+		serviceDomains = append(serviceDomains, ServiceDomain{
+			gitDomain:         gitDomain,
+			webDomain:         webDomain,
+			serviceDefinition: serviceDefinition,
+		})
 	}
 
 	return serviceDomains
@@ -177,8 +174,8 @@ func (self *Service) getPullRequestURLIntoTargetBranch(from string, to string) s
 	return self.resolveUrl(self.pullRequestURLIntoTargetBranch, map[string]string{"From": from, "To": to})
 }
 
-func (self *Service) getCommitURL(commitSha string) string {
-	return self.resolveUrl(self.commitURL, map[string]string{"CommitSha": commitSha})
+func (self *Service) getCommitURL(commitHash string) string {
+	return self.resolveUrl(self.commitURL, map[string]string{"CommitHash": commitHash})
 }
 
 func (self *Service) resolveUrl(templateString string, args map[string]string) string {

pkg/commands/hosting_service/hosting_service_test.go

@@ -340,6 +340,30 @@ func TestGetPullRequestURL(t *testing.T) {
 			},
 			expectedLoggedErrors: nil,
 		},
+		{
+			testName:  "Does not log error when config service webDomain contains a port",
+			from:      "feature/profile-page",
+			remoteUrl: "git@my.domain.test:johndoe/social_network.git",
+			configServiceDomains: map[string]string{
+				"my.domain.test": "gitlab:my.domain.test:1111",
+			},
+			test: func(url string, err error) {
+				assert.NoError(t, err)
+				assert.Equal(t, "https://my.domain.test:1111/johndoe/social_network/-/merge_requests/new?merge_request[source_branch]=feature%2Fprofile-page", url)
+			},
+		},
+		{
+			testName:  "Logs error when webDomain contains more than one colon",
+			from:      "feature/profile-page",
+			remoteUrl: "git@my.domain.test:johndoe/social_network.git",
+			configServiceDomains: map[string]string{
+				"my.domain.test": "gitlab:my.domain.test:1111:2222",
+			},
+			test: func(url string, err error) {
+				assert.Error(t, err)
+			},
+			expectedLoggedErrors: []string{"Unexpected format for git service: 'gitlab:my.domain.test:1111:2222'. Expected something like 'github.com:github.com'"},
+		},
 		{
 			testName:  "Logs error when config service domain is malformed",
 			from:      "feature/profile-page",

pkg/commands/models/branch.go

@@ -1,5 +1,7 @@
 package models
 
+import "fmt"
+
 // Branch : A git branch
 // duplicating this for now
 type Branch struct {
@@ -43,10 +45,30 @@ func (b *Branch) ParentRefName() string {
 	return b.RefName() + "^"
 }
 
+func (b *Branch) FullUpstreamRefName() string {
+	if b.UpstreamRemote == "" || b.UpstreamBranch == "" {
+		return ""
+	}
+
+	return fmt.Sprintf("refs/remotes/%s/%s", b.UpstreamRemote, b.UpstreamBranch)
+}
+
+func (b *Branch) ShortUpstreamRefName() string {
+	if b.UpstreamRemote == "" || b.UpstreamBranch == "" {
+		return ""
+	}
+
+	return fmt.Sprintf("%s/%s", b.UpstreamRemote, b.UpstreamBranch)
+}
+
 func (b *Branch) ID() string {
 	return b.RefName()
 }
 
+func (b *Branch) URN() string {
+	return "branch-" + b.ID()
+}
+
 func (b *Branch) Description() string {
 	return b.RefName()
 }

pkg/commands/models/commit.go

@@ -3,8 +3,8 @@ package models
 import (
 	"fmt"
 
-	"github.com/fsmiamoto/git-todo-parser/todo"
 	"github.com/jesseduffield/lazygit/pkg/utils"
+	"github.com/stefanhaller/git-todo-parser/todo"
 )
 
 // Special commit hash for empty tree object
@@ -30,9 +30,20 @@ const (
 	ActionConflict = todo.Comment + 1
 )
 
+type Divergence int
+
+// For a divergence log (left/right comparison of two refs) this is set to
+// either DivergenceLeft or DivergenceRight for each commit; for normal
+// commit views it is always DivergenceNone.
+const (
+	DivergenceNone Divergence = iota
+	DivergenceLeft
+	DivergenceRight
+)
+
 // Commit : A git commit
 type Commit struct {
-	Sha           string
+	Hash          string
 	Name          string
 	Status        CommitStatus
 	Action        todo.TodoCommand
@@ -41,21 +52,22 @@ type Commit struct {
 	AuthorName    string // something like 'Jesse Duffield'
 	AuthorEmail   string // something like 'jessedduffield@gmail.com'
 	UnixTimestamp int64
+	Divergence    Divergence // set to DivergenceNone unless we are showing the divergence view
 
-	// SHAs of parent commits (will be multiple if it's a merge commit)
+	// Hashes of parent commits (will be multiple if it's a merge commit)
 	Parents []string
 }
 
-func (c *Commit) ShortSha() string {
-	return utils.ShortSha(c.Sha)
+func (c *Commit) ShortHash() string {
+	return utils.ShortHash(c.Hash)
 }
 
 func (c *Commit) FullRefName() string {
-	return c.Sha
+	return c.Hash
 }
 
 func (c *Commit) RefName() string {
-	return c.Sha
+	return c.Hash
 }
 
 func (c *Commit) ParentRefName() string {
@@ -74,7 +86,7 @@ func (c *Commit) ID() string {
 }
 
 func (c *Commit) Description() string {
-	return fmt.Sprintf("%s %s", c.Sha[:7], c.Name)
+	return fmt.Sprintf("%s %s", c.Hash[:7], c.Name)
 }
 
 func (c *Commit) IsMerge() bool {

pkg/commands/models/remote.go

@@ -15,6 +15,10 @@ func (r *Remote) ID() string {
 	return r.RefName()
 }
 
+func (r *Remote) URN() string {
+	return "remote-" + r.ID()
+}
+
 func (r *Remote) Description() string {
 	return r.RefName()
 }

pkg/commands/models/stash_entry.go

@@ -4,8 +4,9 @@ import "fmt"
 
 // StashEntry : A git stash entry
 type StashEntry struct {
-	Index int
-	Name  string
+	Index   int
+	Recency string
+	Name    string
 }
 
 func (s *StashEntry) FullRefName() string {

pkg/commands/models/submodule_config.go

@@ -1,13 +1,33 @@
 package models
 
+import "path/filepath"
+
 type SubmoduleConfig struct {
 	Name string
 	Path string
 	Url  string
+
+	ParentModule *SubmoduleConfig // nil if top-level
+}
+
+func (r *SubmoduleConfig) FullName() string {
+	if r.ParentModule != nil {
+		return r.ParentModule.FullName() + "/" + r.Name
+	}
+
+	return r.Name
+}
+
+func (r *SubmoduleConfig) FullPath() string {
+	if r.ParentModule != nil {
+		return r.ParentModule.FullPath() + "/" + r.Path
+	}
+
+	return r.Path
 }
 
 func (r *SubmoduleConfig) RefName() string {
-	return r.Name
+	return r.FullName()
 }
 
 func (r *SubmoduleConfig) ID() string {
@@ -17,3 +37,12 @@ func (r *SubmoduleConfig) ID() string {
 func (r *SubmoduleConfig) Description() string {
 	return r.RefName()
 }
+
+func (r *SubmoduleConfig) GitDirPath(repoGitDirPath string) string {
+	parentPath := repoGitDirPath
+	if r.ParentModule != nil {
+		parentPath = r.ParentModule.GitDirPath(repoGitDirPath)
+	}
+
+	return filepath.Join(parentPath, "modules", r.Name)
+}

pkg/commands/models/tag.go

@@ -24,6 +24,10 @@ func (t *Tag) ID() string {
 	return t.RefName()
 }
 
+func (t *Tag) URN() string {
+	return "tag-" + t.ID()
+}
+
 func (t *Tag) Description() string {
 	return t.Message
 }

pkg/commands/oscommands/cmd_obj_builder.go

@@ -27,8 +27,14 @@ type CmdObjBuilder struct {
 var _ ICmdObjBuilder = &CmdObjBuilder{}
 
 func (self *CmdObjBuilder) New(args []string) ICmdObj {
+	cmdObj := self.NewWithEnviron(args, os.Environ())
+	return cmdObj
+}
+
+// A command with explicit environment from env
+func (self *CmdObjBuilder) NewWithEnviron(args []string, env []string) ICmdObj {
 	cmd := exec.Command(args[0], args[1:]...)
-	cmd.Env = os.Environ()
+	cmd.Env = env
 
 	return &CmdObj{
 		cmd:    cmd,

pkg/commands/oscommands/cmd_obj_runner.go

@@ -220,9 +220,6 @@ func (self *cmdObjRunner) runAndStreamAux(
 	cmdObj ICmdObj,
 	onRun func(*cmdHandler, io.Writer),
 ) error {
-	// if we're streaming this we don't want any fancy terminal stuff
-	cmdObj.AddEnvVars("TERM=dumb")
-
 	cmdWriter := self.guiIO.newCmdWriterFn()
 
 	if cmdObj.ShouldLog() {