add #include <isc/print.h>

message sequences where not all the messages contain
                        TSIG records.  These may be used in AXFR and IXFR
                        responses.  [RT #45509]

.cvsignore

@@ -1,9 +0,0 @@
-Makefile
-config.log
-config.h
-config.cache
-config.status
-libtool
-isc-config.sh
-configure.lineno
-autom4te.cache

.gitattributes

@@ -0,0 +1,2 @@
+*.vcxproj.in eol=crlf
+*.vcxproj.filters.in eol=crlf

.gitignore

@@ -0,0 +1,62 @@
+Makefile
+config.log
+config.h
+config.cache
+config.status
+libtool
+/isc-config.sh
+/configure.lineno
+autom4te.cache/
+*.o
+*.lo
+*.so
+*.a
+*.la
+*.gcno
+*.gcda
+*_test
+*-symtbl.c
+timestamp
+ans.run
+lwresd.run
+named.run
+named.memstats
+gen.dSYM/
+.libs/
+.deps/
+.dirstamp
+unit/atf-src/atf-c++/atf-c++.pc
+unit/atf-src/atf-c/atf-c.pc
+unit/atf-src/atf-c/defs.h
+unit/atf-src/atf-c/detail/process_helpers
+unit/atf-src/atf-config/atf-config
+unit/atf-src/atf-report/atf-report
+unit/atf-src/atf-report/fail_helper
+unit/atf-src/atf-report/misc_helpers
+unit/atf-src/atf-report/pass_helper
+unit/atf-src/atf-run/atf-run
+unit/atf-src/atf-run/bad_metadata_helper
+unit/atf-src/atf-run/expect_helpers
+unit/atf-src/atf-run/misc_helpers
+unit/atf-src/atf-run/pass_helper
+unit/atf-src/atf-run/several_tcs_helper
+unit/atf-src/atf-run/zero_tcs_helper
+unit/atf-src/atf-sh/atf-check
+unit/atf-src/atf-sh/atf-sh
+unit/atf-src/atf-sh/misc_helpers
+unit/atf-src/atf-version/atf-version
+unit/atf-src/atf-version/revision.h
+unit/atf-src/atf-version/revision.h.stamp
+unit/atf-src/bconfig.h
+unit/atf-src/bootstrap/atconfig
+unit/atf-src/doc/atf.7
+unit/atf-src/stamp-h1
+unit/atf-src/test-programs/c_helpers
+unit/atf-src/test-programs/cpp_helpers
+unit/atf-src/test-programs/sh_helpers
+# ccc-analyzer store its results in .plist directories
+*.plist/
+*~
+.project
+.cproject
+.settings

COPYRIGHT

@@ -1,19 +1,10 @@
-Copyright (C) 2004-2012  Internet Systems Consortium, Inc. ("ISC")
-Copyright (C) 1996-2003  Internet Software Consortium.
+Copyright (C) 1996-2017  Internet Systems Consortium, Inc. ("ISC")
 
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
+This Source Code Form is subject to the terms of the Mozilla Public
+License, v. 2.0. If a copy of the MPL was not distributed with this
+file, You can obtain one at http://mozilla.org/MPL/2.0/.
 
-THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
-
-$Id: COPYRIGHT,v 1.19 2012/01/03 23:46:59 tbox Exp $
+ -----------------------------------------------------------------------------
 
 	Portions of this code release fall under one or more of the
 	following Copyright notices.  Please see individual source
@@ -99,11 +90,7 @@ are met:
 2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in the
    documentation and/or other materials provided with the distribution.
-3. All advertising materials mentioning features or use of this software
-   must display the following acknowledgement:
-     This product includes software developed by the University of
-     California, Berkeley and its contributors.
-4. Neither the name of the University nor the names of its contributors
+3. Neither the name of the University nor the names of its contributors
    may be used to endorse or promote products derived from this software
    without specific prior written permission.
 
@@ -516,3 +503,92 @@ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 OF THE POSSIBILITY OF SUCH DAMAGE.
 
+-----------------------------------------------------------------------------
+
+Copyright (c) 1995, 1997, 1998 The NetBSD Foundation, Inc.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+-----------------------------------------------------------------------------
+
+Copyright (C) 2008-2011  Red Hat, Inc.
+
+Permission to use, copy, modify, and/or distribute this software for any
+purpose with or without fee is hereby granted, provided that the above
+copyright notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND Red Hat DISCLAIMS ALL WARRANTIES WITH
+REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS.  IN NO EVENT SHALL Red Hat BE LIABLE FOR ANY SPECIAL, DIRECT,
+INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
+-----------------------------------------------------------------------------
+
+Copyright (c) 2013-2014, Farsight Security, Inc.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+-----------------------------------------------------------------------------
+
+Copyright (c) 2014 by Farsight Security, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.

FAQ

@@ -1,8 +1,5 @@
-Frequently Asked Questions about BIND 9
-
-Copyright © 2004-2010 Internet Systems Consortium, Inc. ("ISC")
-
-Copyright © 2000-2003 Internet Software Consortium.
+Copyright ? 2000-2010, 2013-2016 Internet Systems Consortium, Inc.
+("ISC")
 
 -----------------------------------------------------------------------
 
@@ -28,8 +25,8 @@ A: Short Answer: No.
    What addresses to listen on? For a laptop on the move a lot you may
    only want to listen on the loop back interfaces.
 
-   Who do you offer recursive service to? Is there are firewall to
-   consider? If so is it stateless or stateful. Are you directly on the
+   To whom do you offer recursive service? Is there a firewall to
+   consider? If so, is it stateless or stateful? Are you directly on the
    Internet? Are you on a private network? Are you on a NAT'd network? The
    answers to all these questions change how you configure even a caching
    name server.
@@ -93,7 +90,7 @@ Q: I'm trying to use TSIG to authenticate dynamic updates or zone
    rejecting the TSIG. Why?
 
 A: This may be a clock skew problem. Check that the the clocks on the
-   client and server are properly synchronised (e.g., using ntp).
+   client and server are properly synchronized (e.g., using ntp).
 
 Q: I see a log message like the following. Why?
 
@@ -104,8 +101,8 @@ A: You are most likely running named as a non-root user, and that user
    fixing this are to create a /var/run/named directory owned by the named
    user and set pid-file to "/var/run/named/named.pid", or set pid-file to
    "named.pid", which will put the file in the directory specified by the
-   directory option (which, in this case, must be writable by the named
-   user).
+   directory option (which, in this case, must be writable by the user
+   named is running as).
 
 Q: I can query the nameserver from the nameserver but not from other
    machines. Why?
@@ -264,7 +261,7 @@ Q: I get a error message like "zone wireless.ietf56.ietf.org/IN: loading
    master file primaries/wireless.ietf56.ietf.org: no owner".
 
 A: This error is produced when a line in the master file contains leading
-   white space (tab/space) but the is no current record owner name to
+   white space (tab/space) but there is no current record owner name to
    inherit the name from. Usually this is the result of putting white
    space before a comment, forgetting the "@" for the SOA record, or
    indenting the master file.
@@ -869,7 +866,7 @@ A: If you run Tiger(Mac OS 10.4) or later then this is all you need to do:
    Copy the key statement from /etc/rndc.conf into /etc/rndc.key, e.g.:
 
    key "rndc-key" {
-           algorithm hmac-md5;
+           algorithm hmac-sha256;
            secret "uvceheVuqf17ZwIcTydddw==";
    };
 

FAQ.xml

@@ -1,28 +1,20 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-       "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" []>
 <!--
- - Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
- - Copyright (C) 2000-2003  Internet Software Consortium.
+ - Copyright (C) 2000-2010, 2013-2016  Internet Systems Consortium, Inc. ("ISC")
  -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
 
-<!-- $Id: FAQ.xml,v 1.54 2010/01/19 23:48:55 tbox Exp $ -->
+<!-- Converted by db4-upgrade version 1.0 -->
+<article xmlns="http://docbook.org/ns/docbook" version="5.0" class="faq">
 
-<article class="faq">
-  <title>Frequently Asked Questions about BIND 9</title>
   <articleinfo>
     <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
+      <year>2003</year>
       <year>2004</year>
       <year>2005</year>
       <year>2006</year>
@@ -30,20 +22,17 @@
       <year>2008</year>
       <year>2009</year>
       <year>2010</year>
+      <year>2013</year>
+      <year>2014</year>
+      <year>2015</year>
+      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
-    <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
-      <year>2003</year>
-      <holder>Internet Software Consortium.</holder>
-    </copyright>
   </articleinfo>
-  <qandaset defaultlabel='qanda'>
-	  
-    <qandadiv><title>Compilation and Installation Questions</title>	  
-    
+  <qandaset defaultlabel="qanda">
+
+    <qandadiv><title>Compilation and Installation Questions</title>
+
     <qandaentry>
       <question>
 	<para>
@@ -59,7 +48,7 @@
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -68,7 +57,7 @@
       </question>
       <answer>
 	<para>
-	  Short Answer: No. 
+	  Short Answer: No.
 	</para>
 	<para>
 	  Long Answer: There really isn't a default configuration which fits
@@ -82,8 +71,8 @@
 	  you may only want to listen on the loop back interfaces.
 	</para>
 	<para>
-	  Who do you offer recursive service to?  Is there are firewall
-	  to consider?  If so is it stateless or stateful.  Are you
+	  To whom do you offer recursive service?  Is there a firewall
+	  to consider?  If so, is it stateless or stateful?  Are you
 	  directly on the Internet?  Are you on a private network? Are
 	  you on a NAT'd network? The answers
 	  to all these questions change how you configure even a
@@ -91,9 +80,9 @@
 	</para>
       </answer>
     </qandaentry>
-    
+
     </qandadiv> <!-- Compilation and Installation Questions -->
-	    
+
     <qandadiv><title>Configuration and Setup Questions</title>
 
     <qandaentry>
@@ -123,7 +112,7 @@ example.com. 86400 IN SOA ns hostmaster ( 1 3600 1800 1814400 3600 )</programlis
 	</informalexample>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <!-- configuration -->
       <question>
@@ -221,7 +210,7 @@ view "chaos" chaos {
       <answer>
 	<para>
 	  This may be a clock skew problem.  Check that the the clocks
-	  on the client and server are properly synchronised (e.g.,
+	  on the client and server are properly synchronized (e.g.,
 	  using ntp).
 	</para>
       </answer>
@@ -245,11 +234,11 @@ view "chaos" chaos {
 	  "/var/run/named/named.pid", or set pid-file to "named.pid",
 	  which will put the file in the directory specified by the
 	  directory option (which, in this case, must be writable by
-	  the named user).
+	  the user named is running as).
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -264,7 +253,7 @@ view "chaos" chaos {
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -357,7 +346,7 @@ Slave 10.0.1.2:
 	</informalexample>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -390,7 +379,7 @@ named-checkzone example.com tmp</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -414,7 +403,7 @@ named-checkzone example.com tmp</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -479,7 +468,7 @@ Master 10.0.1.1:
       <answer>
 	<para>
 	  This error is produced when a line in the master file
-	  contains leading white space (tab/space) but the is no
+	  contains leading white space (tab/space) but there is no
 	  current record owner name to inherit the name from.  Usually
 	  this is the result of putting white space before a comment,
 	  forgetting the "@" for the SOA record, or indenting the master
@@ -499,7 +488,7 @@ Master 10.0.1.1:
 	  You are running chrooted (-t) and have not supplied local timezone
 	  information in the chroot area.
 	</para>
-	<simplelist>
+	<simplelist type="vert">
 	  <member>FreeBSD: /etc/localtime</member>
 	  <member>Solaris: /etc/TIMEZONE and /usr/share/lib/zoneinfo</member>
 	  <member>OSF: /etc/zoneinfo/localtime</member>
@@ -509,7 +498,7 @@ Master 10.0.1.1:
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -549,7 +538,7 @@ Master 10.0.1.1:
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -601,7 +590,7 @@ zone "example.net" {
 	</informalexample>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -692,9 +681,9 @@ server ::/0 { bogus yes; };
 </programlisting>
       </answer>
     </qandaentry>
-    
+
     </qandadiv> <!-- Configuration and Setup Questions -->
-    
+
     <qandadiv><title>Operations Questions</title>
 
     <qandaentry>
@@ -766,7 +755,7 @@ server ::/0 { bogus yes; };
     </qandadiv> <!-- Operations Questions -->
 
     <qandadiv><title>General Questions</title>
-	    
+
     <qandaentry>
       <question>
 	<para>
@@ -805,14 +794,13 @@ server ::/0 { bogus yes; };
 	  of sending dynamic update requests to DNS servers without
 	  being specifically configured to do so.  If the update
 	  requests are coming from a Windows 2000 machine, see
-	  <ulink
-	   url="http://support.microsoft.com/support/kb/articles/q246/8/04.asp">
-  &lt;http://support.microsoft.com/support/kb/articles/q246/8/04.asp&gt;</ulink>
+	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://support.microsoft.com/support/kb/articles/q246/8/04.asp">
+  &lt;http://support.microsoft.com/support/kb/articles/q246/8/04.asp&gt;</link>
 	  for information about how to turn them off.
 	</para>
       </answer>
     </qandaentry>
-	    
+
     <qandaentry>
       <question>
 	<para>
@@ -847,7 +835,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -865,7 +853,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -881,7 +869,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -908,7 +896,7 @@ serial-query-rate 5; // default 20</programlisting>
       </answer>
     </qandaentry>
 
-    <qandaentry>	    
+    <qandaentry>
       <question>
 	<para>
 	  I don't get RRSIG's returned when I use "dig +dnssec".
@@ -920,7 +908,7 @@ serial-query-rate 5; // default 20</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -957,7 +945,7 @@ serial-query-rate 5; // default 20</programlisting>
 	  usage rules and are leaking queries to the Internet.  You
 	  should establish your own zones for these addresses to prevent
 	  you querying the Internet's name servers for these addresses.
-	  Please see <ulink url="http://as112.net/">&lt;http://as112.net/&gt;</ulink>
+	  Please see <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://as112.net/">&lt;http://as112.net/&gt;</link>
 	  for details of the problems you are causing and the counter
 	  measures that have had to be deployed.
 	</para>
@@ -1004,7 +992,7 @@ empty:
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -1081,9 +1069,9 @@ empty:
     </qandaentry>
 
     </qandadiv> <!-- General Questions -->
-    
+
     <qandadiv><title>Operating-System Specific Questions</title>
-	    
+
     <qandadiv><title>HPUX</title>
 
     <qandaentry>
@@ -1111,9 +1099,9 @@ configure: error: need either working unistd.h or sys/select.h</programlisting>
     </qandadiv> <!-- HPUX -->
 
     <qandadiv><title>Linux</title>
-	    
+
     <qandaentry>
-      <question> 
+      <question>
 	<para>
 	  Why do I get the following errors:
 <programlisting>general: errno2result.c:109: unexpected error:
@@ -1127,7 +1115,7 @@ client: UDP client handler shutting down due to fatal receive error: unexpected
 	</para>
 	<para>
 	  See:
-	  <ulink url="http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2">&lt;http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2&gt;</ulink>
+	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2">&lt;http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2&gt;</link>
 	</para>
       </answer>
     </qandaentry>
@@ -1144,9 +1132,9 @@ client: UDP client handler shutting down due to fatal receive error: unexpected
 	  non-blocking is ignored.  It is reported that setting
 	  xfrm_larval_drop to 1 helps but this may have negative side effects.
 	  See:
-<ulink url="https://bugzilla.redhat.com/show_bug.cgi?id=427629">&lt;https://bugzilla.redhat.com/show_bug.cgi?id=427629&gt;</ulink>
+<link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="https://bugzilla.redhat.com/show_bug.cgi?id=427629">&lt;https://bugzilla.redhat.com/show_bug.cgi?id=427629&gt;</link>
 	  and
-<ulink url="http://lkml.org/lkml/2007/12/4/260">&lt;http://lkml.org/lkml/2007/12/4/260&gt;</ulink>.
+<link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://lkml.org/lkml/2007/12/4/260">&lt;http://lkml.org/lkml/2007/12/4/260&gt;</link>.
 	</para>
 	<para>
 	xfrm_larval_drop can be set to 1 by the following procedure:
@@ -1176,7 +1164,7 @@ echo "1" &gt; proc/sys/net/core/xfrm_larval_drop</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -1195,7 +1183,7 @@ echo "1" &gt; proc/sys/net/core/xfrm_larval_drop</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -1216,7 +1204,7 @@ modprobe capability</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -1242,8 +1230,7 @@ modprobe capability</programlisting>
 
 	<para>
 	   Red Hat have adopted the National Security Agency's
-	   SELinux security policy (see <ulink
-   url="http://www.nsa.gov/selinux">&lt;http://www.nsa.gov/selinux&gt;</ulink>)
+	   SELinux security policy (see <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://www.nsa.gov/selinux">&lt;http://www.nsa.gov/selinux&gt;</link>)
 	   and recommendations for BIND security , which are more
 	   secure than running named in a chroot and make use of
 	   the bind-chroot environment unnecessary .
@@ -1277,7 +1264,7 @@ $ROOTDIR/var/tmp
 	  able to write or create files except in the directories
 	  above, with SELinux in Enforcing mode.
 	</para>
-  
+
 	<para>
 	  So, to allow named to update slave or DDNS zone files,
 	  it is best to locate them in $ROOTDIR/var/named/slaves,
@@ -1288,7 +1275,7 @@ zone "slave.zone." IN {
 	type slave;
 	file "slaves/slave.zone.db";
 	...
-};   
+};
 zone "ddns.zone." IN  {
 	type master;
 	allow-updates {...};
@@ -1321,13 +1308,13 @@ options {
 	  system-config-securitylevel GUI, using the 'setsebool'
 	  command, or in /etc/selinux/targeted/booleans.
 	</para>
-  
+
 	<para>
 	  You can disable SELinux protection for named entirely by
 	  setting the 'named_disable_trans=1' SELinux tunable boolean
 	  parameter.
 	</para>
-    
+
 	<para>
 	  The SELinux named policy defines these SELinux contexts for named:
 	  <informalexample>
@@ -1338,7 +1325,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-   
+
 	<para>
 	  If you want to retain use of the SELinux policy for named,
 	  and put named files in different locations, you can do
@@ -1356,7 +1343,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-  
+
 	<para>
 	  To create a custom modifiable named data location, e.g.
 	  '/var/log/named' for a log file, do:
@@ -1366,7 +1353,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-   
+
 	<para>
    To create a custom zone file location, e.g. /root/zones/, do:
 	  <informalexample>
@@ -1375,7 +1362,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-  
+
 	<para>
 	  See these man-pages for more information : selinux(8),
 	  named_selinux(8), chcon(1), setsebool(8)
@@ -1401,8 +1388,8 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
       </question>
       <answer>
 	<para>
-	  Ubuntu uses AppArmor <ulink url="http://en.wikipedia.org/wiki/AppArmor">
-          &lt;http://en.wikipedia.org/wiki/AppArmor&gt;</ulink> in
+	  Ubuntu uses AppArmor <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://en.wikipedia.org/wiki/AppArmor">
+          &lt;http://en.wikipedia.org/wiki/AppArmor&gt;</link> in
 	  addition to normal file system permissions to protect the system.
 	</para>
 	<para>
@@ -1436,11 +1423,11 @@ proc /var/named/proc proc defaults 0 0</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     </qandadiv> <!-- Linux -->
-    
+
     <qandadiv><title>Windows</title>
-	    
+
     <qandaentry>
       <question>
 	<para>
@@ -1461,7 +1448,7 @@ proc /var/named/proc proc defaults 0 0</programlisting>
 	</para>
       </answer>
     </qandaentry>
-    
+
     <qandaentry>
       <question>
 	<para>
@@ -1487,11 +1474,11 @@ options {
 	</informalexample>
       </answer>
     </qandaentry>
-	    
+
     </qandadiv> <!-- Windows -->
-    
+
     <qandadiv><title>FreeBSD</title>
-	    
+
     <qandaentry>
       <question>
 	<para>
@@ -1511,16 +1498,16 @@ rand_irqs="3 14 15"</programlisting>
 	</informalexample>
 	<para>
 	  See also
-	  <ulink url="http://people.freebsd.org/~dougb/randomness.html">
-	  &lt;http://people.freebsd.org/~dougb/randomness.html&gt;</ulink>.
+	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://people.freebsd.org/~dougb/randomness.html">
+	  &lt;http://people.freebsd.org/~dougb/randomness.html&gt;</link>.
 	</para>
       </answer>
     </qandaentry>
-    
+
     </qandadiv> <!-- FreeBSD -->
-    
+
     <qandadiv><title>Solaris</title>
-	    
+
     <qandaentry>
       <question>
 	<para>
@@ -1532,15 +1519,14 @@ rand_irqs="3 14 15"</programlisting>
 	  Sun has a blog entry describing how to do this.
 	</para>
 	<para>
-	  <ulink
-	  url="http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris">
+	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris">
 	 &lt;http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris&gt;
-	  </ulink>
+	  </link>
 	</para>
       </answer>
     </qandaentry>
-    
-    </qandadiv>
+
+    </qandadiv> <!-- Solaris -->
 
     <qandadiv><title>Apple Mac OS X</title>
 
@@ -1556,7 +1542,7 @@ rand_irqs="3 14 15"</programlisting>
 	</para>
 	<informalexample>
 	  <programlisting>
-% sudo rndc-confgen  > /etc/rndc.conf</programlisting>
+% sudo rndc-confgen  &gt; /etc/rndc.conf</programlisting>
 	</informalexample>
 	<para>
 	  Copy the key statement from /etc/rndc.conf into /etc/rndc.key, e.g.:
@@ -1564,7 +1550,7 @@ rand_irqs="3 14 15"</programlisting>
 	<informalexample>
 	  <programlisting>
 key "rndc-key" {
-	algorithm hmac-md5;
+	algorithm hmac-sha256;
 	secret "uvceheVuqf17ZwIcTydddw==";
 };</programlisting>
 	</informalexample>
@@ -1604,8 +1590,8 @@ key "rndc-key" {
       </answer>
     </qandaentry>
 
-    </qandadiv>
-    
+    </qandadiv> <!-- Apple Mac OS X -->
+
     </qandadiv> <!-- Operating-System Specific Questions -->
 
   </qandaset>

HISTORY

@@ -1,5 +1,232 @@
 Summary of functional enhancements from prior major releases of BIND 9:
 
+BIND 9.10.0
+
+	BIND 9.10.0 includes a number of changes from BIND 9.9 and earlier
+	releases.  New features include:
+
+	 - DNS Response-rate limiting (DNS RRL), which blunts the
+	   impact of reflection and amplification attacks, is always
+	   compiled in and no longer requires a compile-time option
+	   to enable it.
+	 - An experimental "Source Identity Token" (SIT) EDNS option
+	   is now available.  Similar to DNS Cookies as invented by
+	   Donald Eastlake 3rd, these are designed to enable clients
+	   to detect off-path spoofed responses, and to enable servers
+	   to detect spoofed-source queries.  Servers can be configured
+	   to send smaller responses to clients that have not identified
+	   themselves using a SIT option, reducing the effectiveness of
+	   amplification attacks.  RRL processing has also been updated;
+	   clients proven to be legitimate via SIT are not subject to
+	   rate limiting.  Use "configure --enable-sit" to enable this
+	   feature in BIND.
+	 - A new zone file format, "map", stores zone data in a
+	   format that can be mapped directly into memory, allowing
+	   significantly faster zone loading.
+	 - "delv" (domain entity lookup and validation) is a new tool
+	   with dig-like semantics for looking up DNS data and performing
+	   internal DNSSEC validation.  This allows easy validation in
+	   environments where the resolver may not be trustworthy, and
+	   assists with troubleshooting of DNSSEC problems. (NOTE:
+	   In previous development releases of BIND 9.10, this utility
+	   was called "delve". The spelling has been changed to avoid
+	   confusion with the "delve" utility included with the Xapian
+	   search engine.)
+	 - Improved EDNS(0) processing for better resolver performance
+	   and reliability over slow or lossy connections.
+	 - A new "configure --with-tuning=large" option tunes certain
+	   compiled-in constants and default settings to values better
+	   suited to large servers with abundant memory.  This can
+	   improve performance on such servers, but will consume more
+	   memory and may degrade performance on smaller systems.
+	 - Substantial improvement in response-policy zone (RPZ)
+	   performance.  Up to 32 response-policy zones can be
+	   configured with minimal performance loss.
+	 - To improve recursive resolver performance, cache records
+	   which are still being requested by clients can now be
+	   automatically refreshed from the authoritative server
+	   before they expire, reducing or eliminating the time
+	   window in which no answer is available in the cache.
+	 - New "rpz-client-ip" triggers and drop policies allowing
+	   response policies based on the IP address of the client.
+	 - ACLs can now be specified based on geographic location
+	   using the MaxMind GeoIP databases.  Use "configure
+	   --with-geoip" to enable.
+	 - Zone data can now be shared between views, allowing
+	   multiple views to serve the same zones authoritatively
+	   without storing multiple copies in memory.
+	 - New XML schema (version 3) for the statistics channel
+	   includes many new statistics and uses a flattened XML tree
+	   for faster parsing. The older schema is now deprecated.
+	 - A new stylesheet, based on the Google Charts API, displays
+	   XML statistics in charts and graphs on javascript-enabled
+	   browsers.
+	 - The statistics channel can now provide data in JSON
+	   format as well as XML.
+	 - New stats counters track TCP and UDP queries received
+	   per zone, and EDNS options received in total.
+	 - The internal and export versions of the BIND libraries
+	   (libisc, libdns, etc) have been unified so that external
+	   library clients can use the same libraries as BIND itself.
+	 - A new compile-time option, "configure --enable-native-pkcs11",
+	   allows BIND 9 cryptography functions to use the PKCS#11 API
+	   natively, so that BIND can drive a cryptographic hardware
+	   service module (HSM) directly instead of using a modified
+	   OpenSSL as an intermediary. (Note: This feature requires an
+	   HSM to have a full implementation of the PKCS#11 API; many
+	   current HSMs only have partial implementations. The new
+	   "pkcs11-tokens" command can be used to check API completeness.
+	   Native PKCS#11 is known to work with the Thales nShield HSM
+	   and with SoftHSM version 2 from the Open DNSSEC project.)
+	 - The new "max-zone-ttl" option enforces maximum TTLs for
+	   zones. This can simplify the process of rolling DNSSEC keys
+	   by guaranteeing that cached signatures will have expired
+	   within the specified amount of time.
+	 - "dig +subnet" sends an EDNS CLIENT-SUBNET option when
+	   querying.
+	 - "dig +expire" sends an EDNS EXPIRE option when querying.
+	   When this option is sent with an SOA query to a server
+	   that supports it, it will report the expiry time of
+	   a slave zone.
+	 - New "dnssec-coverage" tool to check DNSSEC key coverage
+	   for a zone and report if a lapse in signing coverage has
+	   been inadvertently scheduled.
+	 - Signing algorithm flexibility and other improvements
+	   for the "rndc" control channel.
+	 - "named-checkzone" and "named-compilezone" can now read
+	   journal files, allowing them to process dynamic zones.
+	 - Multiple DLZ databases can now be configured.  Individual
+	   zones can be configured to be served from a specific DLZ
+	   database.  DLZ databases now serve zones of type "master"
+	   and "redirect".
+	 - "rndc zonestatus" reports information about a specified zone.
+	 - "named" now listens on IPv6 as well as IPv4 interfaces
+	   by default.
+	 - "named" now preserves the capitalization of names
+	   when responding to queries: for instance, a query for
+	   "example.com" may be answered with "example.COM" if the
+	   name was configured that way in the zone file.  Some
+	   clients have a bug causing them to depend on the older
+	   behavior, in which the case of the answer always matched
+	   the case of the query, rather than the case of the name
+	   configured in the DNS.  Such clients can now be specified
+	   in the new "no-case-compress" ACL; this will restore the
+	   older behavior of "named" for those clients only.
+	 - new "dnssec-importkey" command allows the use of offline
+	   DNSSEC keys with automatic DNSKEY management.
+	 - New "named-rrchecker" tool to verify the syntactic
+	   correctness of individual resource records.
+	 - When re-signing a zone, the new "dnssec-signzone -Q" option
+	   drops signatures from keys that are still published but are
+	   no longer active.
+	 - "named-checkconf -px" will print the contents of configuration
+	   files with the shared secrets obscured, making it easier to
+	   share configuration (e.g. when submitting a bug report)
+	   without revealing private information.
+	 - "rndc scan" causes named to re-scan network interfaces for
+	   changes in local addresses.
+	 - On operating systems with support for routing sockets,
+	   network interfaces are re-scanned automatically whenever
+	   they change.
+	 - "tsig-keygen" is now available as an alternate command
+	   name to use for "ddns-confgen".
+
+BIND 9.9.0
+
+	BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
+	releases.  New features include:
+
+	- Inline signing, allowing automatic DNSSEC signing of
+	  master zones without modification of the zonefile, or
+	  "bump in the wire" signing in slaves.
+	- NXDOMAIN redirection.
+	- New 'rndc flushtree' command clears all data under a given
+	  name from the DNS cache.
+	- New 'rndc sync' command dumps pending changes in a dynamic
+	  zone to disk without a freeze/thaw cycle.
+	- New 'rndc signing' command displays or clears signing status
+	  records in 'auto-dnssec' zones.
+	- NSEC3 parameters for 'auto-dnssec' zones can now be set prior
+	  to signing, eliminating the need to initially sign with NSEC.
+	- Startup time improvements on large authoritative servers.
+	- Slave zones are now saved in raw format by default.
+	- Several improvements to response policy zones (RPZ).
+	- Improved hardware scalability by using multiple threads
+	  to listen for queries and using finer-grained client locking
+	- The 'also-notify' option now takes the same syntax as
+	  'masters', so it can used named masterlists and TSIG keys.
+	- 'dnssec-signzone -D' writes an output file containing only DNSSEC
+	  data, which can be included by the primary zone file.
+	- 'dnssec-signzone -R' forces removal of signatures that are
+	  not expired but were created by a key which no longer exists.
+	- 'dnssec-signzone -X' allows a separate expiration date to
+	  be specified for DNSKEY signatures from other signatures.
+	- New '-L' option to dnssec-keygen, dnssec-settime, and
+	  dnssec-keyfromlabel sets the default TTL for the key.
+	- dnssec-dsfromkey now supports reading from standard input,
+	  to make it easier to convert DNSKEY to DS.
+	- RFC 1918 reverse zones have been added to the empty-zones
+	  table per RFC 6303.
+	- Dynamic updates can now optionally set the zone's SOA serial
+	  number to the current UNIX time.
+	- DLZ modules can now retrieve the source IP address of
+	  the querying client.
+	- 'request-ixfr' option can now be set at the per-zone level.
+	- 'dig +rrcomments' turns on comments about DNSKEY records,
+	  indicating their key ID, algorithm and function
+	- Simplified nsupdate syntax and added readline support
+
+BIND 9.8.0
+
+        BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
+        releases.  New features include:
+
+        - Built-in trust anchor for the root zone, which can be
+          switched on via "dnssec-validation auto;"
+        - Support for DNS64.
+        - Support for response policy zones (RPZ).
+        - Support for writable DLZ zones.
+        - Improved ease of configuration of GSS/TSIG for
+          interoperability with Active Directory
+        - Support for GOST signing algorithm for DNSSEC.
+        - Removed RTT Banding from server selection algorithm.
+        - New "static-stub" zone type.
+        - Allow configuration of resolver timeouts via
+          "resolver-query-timeout" option.
+        - The DLZ "dlopen" driver is now built by default.
+        - Added a new include file with function typedefs
+          for the DLZ "dlopen" driver.
+        - Made "--with-gssapi" default.
+        - More verbose error reporting from DLZ LDAP.
+
+BIND 9.7.0
+
+	BIND 9.7.0 includes a number of changes from BIND 9.6 and earlier
+	releases.  Most are intended to simplify DNSSEC configuration.
+	New features include:
+
+	- Fully automatic signing of zones by "named".
+	- Simplified configuration of DNSSEC Lookaside Validation (DLV).
+	- Simplified configuration of Dynamic DNS, using the "ddns-confgen"
+	  command line tool or the "local" update-policy option.  (As a side
+	  effect, this also makes it easier to configure automatic zone
+	  re-signing.)
+	- New named option "attach-cache" that allows multiple views to
+	  share a single cache.
+	- DNS rebinding attack prevention.
+	- New default values for dnssec-keygen parameters.
+	- Support for RFC 5011 automated trust anchor maintenance
+	- Smart signing: simplified tools for zone signing and key
+	  maintenance.
+	- The "statistics-channels" option is now available on Windows.
+	- A new DNSSEC-aware libdns API for use by non-BIND9 applications
+	- On some platforms, named and other binaries can now print out
+	  a stack backtrace on assertion failure, to aid in debugging.
+	- A "tools only" installation mode on Windows, which only installs
+	  dig, host, nslookup and nsupdate.
+	- Improved PKCS#11 support, including Keyper support and explicit
+	  OpenSSL engine selection.
+
 BIND 9.6.0
 
         Full NSEC3 support

LICENSE

@@ -0,0 +1,362 @@
+Mozilla Public License, version 2.0
+
+1. Definitions
+
+1.1. "Contributor"
+
+     means each individual or legal entity that creates, contributes to the
+     creation of, or owns Covered Software.
+
+1.2. "Contributor Version"
+
+     means the combination of the Contributions of others (if any) used by a
+     Contributor and that particular Contributor's Contribution.
+
+1.3. "Contribution"
+
+     means Covered Software of a particular Contributor.
+
+1.4. "Covered Software"
+
+     means Source Code Form to which the initial Contributor has attached the
+     notice in Exhibit A, the Executable Form of such Source Code Form, and
+     Modifications of such Source Code Form, in each case including portions
+     thereof.
+
+1.5. "Incompatible With Secondary Licenses"
+     means
+
+     a. that the initial Contributor has attached the notice described in
+        Exhibit B to the Covered Software; or
+
+     b. that the Covered Software was made available under the terms of
+        version 1.1 or earlier of the License, but not also under the terms of
+        a Secondary License.
+
+1.6. "Executable Form"
+
+     means any form of the work other than Source Code Form.
+
+1.7. "Larger Work"
+
+     means a work that combines Covered Software with other material, in a
+     separate file or files, that is not Covered Software.
+
+1.8. "License"
+
+     means this document.
+
+1.9. "Licensable"
+
+     means having the right to grant, to the maximum extent possible, whether
+     at the time of the initial grant or subsequently, any and all of the
+     rights conveyed by this License.
+
+1.10. "Modifications"
+
+     means any of the following:
+
+     a. any file in Source Code Form that results from an addition to,
+        deletion from, or modification of the contents of Covered Software; or
+
+     b. any new file in Source Code Form that contains any Covered Software.
+
+1.11. "Patent Claims" of a Contributor
+
+      means any patent claim(s), including without limitation, method,
+      process, and apparatus claims, in any patent Licensable by such
+      Contributor that would be infringed, but for the grant of the License,
+      by the making, using, selling, offering for sale, having made, import,
+      or transfer of either its Contributions or its Contributor Version.
+
+1.12. "Secondary License"
+
+      means either the GNU General Public License, Version 2.0, the GNU Lesser
+      General Public License, Version 2.1, the GNU Affero General Public
+      License, Version 3.0, or any later versions of those licenses.
+
+1.13. "Source Code Form"
+
+      means the form of the work preferred for making modifications.
+
+1.14. "You" (or "Your")
+
+      means an individual or a legal entity exercising rights under this
+      License. For legal entities, "You" includes any entity that controls, is
+      controlled by, or is under common control with You. For purposes of this
+      definition, "control" means (a) the power, direct or indirect, to cause
+      the direction or management of such entity, whether by contract or
+      otherwise, or (b) ownership of more than fifty percent (50%) of the
+      outstanding shares or beneficial ownership of such entity.
+
+
+2. License Grants and Conditions
+
+2.1. Grants
+
+     Each Contributor hereby grants You a world-wide, royalty-free,
+     non-exclusive license:
+
+     a. under intellectual property rights (other than patent or trademark)
+        Licensable by such Contributor to use, reproduce, make available,
+        modify, display, perform, distribute, and otherwise exploit its
+        Contributions, either on an unmodified basis, with Modifications, or
+        as part of a Larger Work; and
+
+     b. under Patent Claims of such Contributor to make, use, sell, offer for
+        sale, have made, import, and otherwise transfer either its
+        Contributions or its Contributor Version.
+
+2.2. Effective Date
+
+     The licenses granted in Section 2.1 with respect to any Contribution
+     become effective for each Contribution on the date the Contributor first
+     distributes such Contribution.
+
+2.3. Limitations on Grant Scope
+
+     The licenses granted in this Section 2 are the only rights granted under
+     this License. No additional rights or licenses will be implied from the
+     distribution or licensing of Covered Software under this License.
+     Notwithstanding Section 2.1(b) above, no patent license is granted by a
+     Contributor:
+
+     a. for any code that a Contributor has removed from Covered Software; or
+
+     b. for infringements caused by: (i) Your and any other third party's
+        modifications of Covered Software, or (ii) the combination of its
+        Contributions with other software (except as part of its Contributor
+        Version); or
+
+     c. under Patent Claims infringed by Covered Software in the absence of
+        its Contributions.
+
+     This License does not grant any rights in the trademarks, service marks,
+     or logos of any Contributor (except as may be necessary to comply with
+     the notice requirements in Section 3.4).
+
+2.4. Subsequent Licenses
+
+     No Contributor makes additional grants as a result of Your choice to
+     distribute the Covered Software under a subsequent version of this
+     License (see Section 10.2) or under the terms of a Secondary License (if
+     permitted under the terms of Section 3.3).
+
+2.5. Representation
+
+     Each Contributor represents that the Contributor believes its
+     Contributions are its original creation(s) or it has sufficient rights to
+     grant the rights to its Contributions conveyed by this License.
+
+2.6. Fair Use
+
+     This License is not intended to limit any rights You have under
+     applicable copyright doctrines of fair use, fair dealing, or other
+     equivalents.
+
+2.7. Conditions
+
+     Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted in
+     Section 2.1.
+
+
+3. Responsibilities
+
+3.1. Distribution of Source Form
+
+     All distribution of Covered Software in Source Code Form, including any
+     Modifications that You create or to which You contribute, must be under
+     the terms of this License. You must inform recipients that the Source
+     Code Form of the Covered Software is governed by the terms of this
+     License, and how they can obtain a copy of this License. You may not
+     attempt to alter or restrict the recipients' rights in the Source Code
+     Form.
+
+3.2. Distribution of Executable Form
+
+     If You distribute Covered Software in Executable Form then:
+
+     a. such Covered Software must also be made available in Source Code Form,
+        as described in Section 3.1, and You must inform recipients of the
+        Executable Form how they can obtain a copy of such Source Code Form by
+        reasonable means in a timely manner, at a charge no more than the cost
+        of distribution to the recipient; and
+
+     b. You may distribute such Executable Form under the terms of this
+        License, or sublicense it under different terms, provided that the
+        license for the Executable Form does not attempt to limit or alter the
+        recipients' rights in the Source Code Form under this License.
+
+3.3. Distribution of a Larger Work
+
+     You may create and distribute a Larger Work under terms of Your choice,
+     provided that You also comply with the requirements of this License for
+     the Covered Software. If the Larger Work is a combination of Covered
+     Software with a work governed by one or more Secondary Licenses, and the
+     Covered Software is not Incompatible With Secondary Licenses, this
+     License permits You to additionally distribute such Covered Software
+     under the terms of such Secondary License(s), so that the recipient of
+     the Larger Work may, at their option, further distribute the Covered
+     Software under the terms of either this License or such Secondary
+     License(s).
+
+3.4. Notices
+
+     You may not remove or alter the substance of any license notices
+     (including copyright notices, patent notices, disclaimers of warranty, or
+     limitations of liability) contained within the Source Code Form of the
+     Covered Software, except that You may alter any license notices to the
+     extent required to remedy known factual inaccuracies.
+
+3.5. Application of Additional Terms
+
+     You may choose to offer, and to charge a fee for, warranty, support,
+     indemnity or liability obligations to one or more recipients of Covered
+     Software. However, You may do so only on Your own behalf, and not on
+     behalf of any Contributor. You must make it absolutely clear that any
+     such warranty, support, indemnity, or liability obligation is offered by
+     You alone, and You hereby agree to indemnify every Contributor for any
+     liability incurred by such Contributor as a result of warranty, support,
+     indemnity or liability terms You offer. You may include additional
+     disclaimers of warranty and limitations of liability specific to any
+     jurisdiction.
+
+4. Inability to Comply Due to Statute or Regulation
+
+   If it is impossible for You to comply with any of the terms of this License
+   with respect to some or all of the Covered Software due to statute,
+   judicial order, or regulation then You must: (a) comply with the terms of
+   this License to the maximum extent possible; and (b) describe the
+   limitations and the code they affect. Such description must be placed in a
+   text file included with all distributions of the Covered Software under
+   this License. Except to the extent prohibited by statute or regulation,
+   such description must be sufficiently detailed for a recipient of ordinary
+   skill to be able to understand it.
+
+5. Termination
+
+5.1. The rights granted under this License will terminate automatically if You
+     fail to comply with any of its terms. However, if You become compliant,
+     then the rights granted under this License from a particular Contributor
+     are reinstated (a) provisionally, unless and until such Contributor
+     explicitly and finally terminates Your grants, and (b) on an ongoing
+     basis, if such Contributor fails to notify You of the non-compliance by
+     some reasonable means prior to 60 days after You have come back into
+     compliance. Moreover, Your grants from a particular Contributor are
+     reinstated on an ongoing basis if such Contributor notifies You of the
+     non-compliance by some reasonable means, this is the first time You have
+     received notice of non-compliance with this License from such
+     Contributor, and You become compliant prior to 30 days after Your receipt
+     of the notice.
+
+5.2. If You initiate litigation against any entity by asserting a patent
+     infringement claim (excluding declaratory judgment actions,
+     counter-claims, and cross-claims) alleging that a Contributor Version
+     directly or indirectly infringes any patent, then the rights granted to
+     You by any and all Contributors for the Covered Software under Section
+     2.1 of this License shall terminate.
+
+5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user
+     license agreements (excluding distributors and resellers) which have been
+     validly granted by You or Your distributors under this License prior to
+     termination shall survive termination.
+
+6. Disclaimer of Warranty
+
+   Covered Software is provided under this License on an "as is" basis,
+   without warranty of any kind, either expressed, implied, or statutory,
+   including, without limitation, warranties that the Covered Software is free
+   of defects, merchantable, fit for a particular purpose or non-infringing.
+   The entire risk as to the quality and performance of the Covered Software
+   is with You. Should any Covered Software prove defective in any respect,
+   You (not any Contributor) assume the cost of any necessary servicing,
+   repair, or correction. This disclaimer of warranty constitutes an essential
+   part of this License. No use of  any Covered Software is authorized under
+   this License except under this disclaimer.
+
+7. Limitation of Liability
+
+   Under no circumstances and under no legal theory, whether tort (including
+   negligence), contract, or otherwise, shall any Contributor, or anyone who
+   distributes Covered Software as permitted above, be liable to You for any
+   direct, indirect, special, incidental, or consequential damages of any
+   character including, without limitation, damages for lost profits, loss of
+   goodwill, work stoppage, computer failure or malfunction, or any and all
+   other commercial damages or losses, even if such party shall have been
+   informed of the possibility of such damages. This limitation of liability
+   shall not apply to liability for death or personal injury resulting from
+   such party's negligence to the extent applicable law prohibits such
+   limitation. Some jurisdictions do not allow the exclusion or limitation of
+   incidental or consequential damages, so this exclusion and limitation may
+   not apply to You.
+
+8. Litigation
+
+   Any litigation relating to this License may be brought only in the courts
+   of a jurisdiction where the defendant maintains its principal place of
+   business and such litigation shall be governed by laws of that
+   jurisdiction, without reference to its conflict-of-law provisions. Nothing
+   in this Section shall prevent a party's ability to bring cross-claims or
+   counter-claims.
+
+9. Miscellaneous
+
+   This License represents the complete agreement concerning the subject
+   matter hereof. If any provision of this License is held to be
+   unenforceable, such provision shall be reformed only to the extent
+   necessary to make it enforceable. Any law or regulation which provides that
+   the language of a contract shall be construed against the drafter shall not
+   be used to construe this License against a Contributor.
+
+
+10. Versions of the License
+
+10.1. New Versions
+
+      Mozilla Foundation is the license steward. Except as provided in Section
+      10.3, no one other than the license steward has the right to modify or
+      publish new versions of this License. Each version will be given a
+      distinguishing version number.
+
+10.2. Effect of New Versions
+
+      You may distribute the Covered Software under the terms of the version
+      of the License under which You originally received the Covered Software,
+      or under the terms of any subsequent version published by the license
+      steward.
+
+10.3. Modified Versions
+
+      If you create software not governed by this License, and you want to
+      create a new license for such software, you may create and use a
+      modified version of this License if you rename the license and remove
+      any references to the name of the license steward (except to note that
+      such modified license differs from this License).
+
+10.4. Distributing Source Code Form that is Incompatible With Secondary
+      Licenses If You choose to distribute Source Code Form that is
+      Incompatible With Secondary Licenses under the terms of this version of
+      the License, the notice described in Exhibit B of this License must be
+      attached.
+
+Exhibit A - Source Code Form License Notice
+
+      This Source Code Form is subject to the
+      terms of the Mozilla Public License, v.
+      2.0. If a copy of the MPL was not
+      distributed with this file, You can
+      obtain one at
+      http://mozilla.org/MPL/2.0/.
+
+If it is not possible or desirable to put the notice in a particular file,
+then You may include the notice in a location (such as a LICENSE file in a
+relevant directory) where a recipient would be likely to look for such a
+notice.
+
+You may add additional accurate notices of copyright ownership.
+
+Exhibit B - "Incompatible With Secondary Licenses" Notice
+
+      This Source Code Form is "Incompatible
+      With Secondary Licenses", as defined by
+      the Mozilla Public License, v. 2.0.

Makefile.in

@@ -1,17 +1,8 @@
-# Copyright (C) 2004-2009, 2011  Internet Systems Consortium, Inc. ("ISC")
-# Copyright (C) 1998-2002  Internet Software Consortium.
+# Copyright (C) 1998-2002, 2004-2009, 2011-2016  Internet Systems Consortium, Inc. ("ISC")
 #
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
 
 # $Id: Makefile.in,v 1.62 2011/09/06 04:06:37 marka Exp $
 
@@ -19,10 +10,11 @@ srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-@BIND9_VERSION@
+VERSION=@BIND9_VERSION@
 
-SUBDIRS =	make unit lib bin doc @LIBEXPORT@
+SUBDIRS =	make unit lib bin doc
 TARGETS =
+PREREQS =	bind.keys.h
 
 MANPAGES =	isc-config.sh.1
 
@@ -32,6 +24,12 @@ MANOBJS =	${MANPAGES} ${HTMLPAGES}
 
 @BIND9_MAKE_RULES@
 
+newrr:
+	cd lib/dns; ${MAKE} newrr
+
+bind.keys.h: ${top_srcdir}/bind.keys ${srcdir}/util/bindkeys.pl
+	${PERL} ${srcdir}/util/bindkeys.pl < ${top_srcdir}/bind.keys > $@
+
 distclean::
 	rm -f config.cache config.h config.log config.status TAGS
 	rm -f libtool isc-config.sh configure.lineno
@@ -41,6 +39,7 @@ distclean::
 # to make it.
 maintainer-clean::
 	rm -f configure
+	rm -f bind.keys.h
 
 docclean manclean maintainer-clean::
 	rm -f ${MANOBJS}
@@ -54,16 +53,39 @@ installdirs:
 
 install:: isc-config.sh installdirs
 	${INSTALL_SCRIPT} isc-config.sh ${DESTDIR}${bindir}
+	rm -f ${DESTDIR}${bindir}/bind9-config
+	@LN@ ${DESTDIR}${bindir}/isc-config.sh ${DESTDIR}${bindir}/bind9-config
 	${INSTALL_DATA} ${top_srcdir}/isc-config.sh.1 ${DESTDIR}${mandir}/man1
+	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
+	@LN@ ${DESTDIR}${mandir}/man1/isc-config.sh.1 ${DESTDIR}${mandir}/man1/bind9-config.1
 	${INSTALL_DATA} ${top_srcdir}/bind.keys ${DESTDIR}${sysconfdir}
 
+uninstall::
+	rm -f ${DESTDIR}${sysconfdir}/bind.keys
+	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
+	rm -f ${DESTDIR}${mandir}/man1/isc-config.sh.1
+	rm -f ${DESTDIR}${bindir}/bind9-config
+	rm -f ${DESTDIR}${bindir}/isc-config.sh
+
 tags:
 	rm -f TAGS
 	find lib bin -name "*.[ch]" -print | @ETAGS@ -
 
-check: test
+test check:
+	@if test -n "`${PERL} ${top_srcdir}/bin/tests/system/testsock.pl 2>&- || echo fail`"; then \
+	echo I: NOTE: The tests were not run because they require that; \
+	echo I:	the IP addresses 10.53.0.1 through 10.53.0.8 are configured; \
+	echo I:	as alias addresses on the loopback interface.  Please run; \
+	echo I:	\'bin/tests/system/ifconfig.sh up\' as root to configure; \
+	echo I:	them, then rerun the tests. Run make force-test to run the; \
+	echo I:	tests anyway.; \
+	exit 1; \
+	fi
+	${MAKE} test-force
 
-test:
+force-test: test-force
+
+test-force:
 	status=0; \
 	(cd bin/tests && ${MAKE} ${MAKEDEFS} test) || status=1; \
 	(test -f unit/unittest.sh && $(SHELL) unit/unittest.sh) || status=1; \
@@ -74,5 +96,8 @@ FAQ: FAQ.xml
 	LC_ALL=C ${W3M} -T text/html -dump -cols 72 >$@.tmp
 	mv $@.tmp $@
 
+unit::
+	sh ${top_srcdir}/unit/unittest.sh
+
 clean::
 	rm -f FAQ.tmp

README

@@ -48,74 +48,176 @@ BIND 9
 	For a detailed list of user-visible changes from
 	previous releases, see the CHANGES file.
 
-BIND 9.9.0
+	For up-to-date release notes and errata, see
+	http://www.isc.org/software/bind9/releasenotes
 
-	BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
+BIND 9.11.1-P3
+
+	Addresses a TSIG regression introduced in 9.11.1-P2.
+
+BIND 9.11.1-P2
+
+        This version contains a fix for the security flaws
+        disclosed in CVE-2017-3142 and CVE-2017-3143.
+
+BIND 9.11.1-P1
+
+        This version contains a fix for the security flaws
+        disclosed in CVE-2017-3140 and CVE-2017-3141.
+
+BIND 9.11.1
+	
+	BIND 9.11.1 is a maintenance release and addresses the security
+	flaws disclosed in CVE-2016-6170, CVE-2016-8864, CVE-2016-9131,
+	CVE-2016-9147, CVE-2016-9778, CVE-2017-3135, CVE-2017-3136,
+	CVE-2017-3137 and CVE-2017-3138.
+
+BIND 9.11.0
+
+	BIND 9.11.0 includes a number of changes from BIND 9.10 and earlier
 	releases.  New features include:
 
-        - Inline signing, allowing automatic DNSSEC signing of
-          master zones without modification of the zonefile, or 
-          "bump in the wire" signing in slaves.
-        - NXDOMAIN redirection.
-        - New 'rndc flushtree' command clears all data under a given
-          name from the DNS cache.
-        - New 'rndc sync' command dumps pending changes in a dynamic
-          zone to disk without a freeze/thaw cycle.
-        - New 'rndc signing' command displays or clears signing status
-          records in 'auto-dnssec' zones.
-        - NSEC3 parameters for 'auto-dnssec' zones can now be set prior
-          to signing, eliminating the need to initially sign with NSEC.
-        - Startup time improvements on large authoritative servers.
-        - Slave zones are now saved in raw format by default.
-        - Several improvements to response policy zones (RPZ).
-        - Improved hardware scalability by using multiple threads
-          to listen for queries and using finer-grained client locking
-        - The 'also-notify' option now takes the same syntax as
-          'masters', so it can used named masterlists and TSIG keys.
-        - 'dnssec-signzone -D' writes an output file containing only DNSSEC
-          data, which can be included by the primary zone file.
-        - 'dnssec-signzone -R' forces removal of signatures that are
-          not expired but were created by a key which no longer exists.
-        - 'dnssec-signzone -X' allows a separate expiration date to
-          be specified for DNSKEY signatures from other signatures.
-        - New '-L' option to dnssec-keygen, dnssec-settime, and
-          dnssec-keyfromlabel sets the default TTL for the key.
-        - dnssec-dsfromkey now supports reading from standard input,
-          to make it easier to convert DNSKEY to DS.
-        - RFC 1918 reverse zones have been added to the empty-zones
-          table per RFC 6303.
-        - Dynamic updates can now optionally set the zone's SOA serial
-          number to the current UNIX time.
-        - DLZ modules can now retrieve the source IP address of
-          the querying client.
-        - 'request-ixfr' option can now be set at the per-zone level.
-        - 'dig +rrcomments' turns on comments about DNSKEY records,
-          indicating their key ID, algorithm and function
-        - Simplified nsupdate syntax and added readline support
-
-BIND 9.8.0
-
-        BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
-        releases.  New features include:
-
-        - Built-in trust anchor for the root zone, which can be
-          switched on via "dnssec-validation auto;"
-        - Support for DNS64.
-        - Support for response policy zones (RPZ).
-        - Support for writable DLZ zones.
-        - Improved ease of configuration of GSS/TSIG for
-          interoperability with Active Directory
-        - Support for GOST signing algorithm for DNSSEC.
-        - Removed RTT Banding from server selection algorithm.
-        - New "static-stub" zone type.
-        - Allow configuration of resolver timeouts via
-          "resolver-query-timeout" option.
-	- The DLZ "dlopen" driver is now built by default.
-	- Added a new include file with function typedefs
-          for the DLZ "dlopen" driver.
-	- Made "--with-gssapi" default.
-	- More verbose error reporting from DLZ LDAP.
+	- Added support for Catalog Zones, a new method for provisioning
+	  servers: a list of zones to be served is stored in a DNS zone,
+	  along with their configuration parameters. Changes to the
+	  catalog zone are propagated to slaves via normal AXFR/IXFR,
+	  whereupon the zones that are listed in it are automatically
+	  added, deleted or reconfigured.
+	- Added support for "dnstap", a fast and flexible method of
+	  capturing and logging DNS traffic.
+	- Added support for "dyndb", a new API for loading zone data
+	  from an external database, developed by Red Hat for the FreeIPA
+	  project.
+	- "fetchlimit" quotas are now compiled in by default.  These
+	  are for the use of recursive resolvers that are are under
+	  high query load for domains whose authoritative servers are
+	  nonresponsive or are experiencing a denial of service attack:
+	  + "fetches-per-server" limits the number of simultaneous queries
+	    that can be sent to any single authoritative server.  The
+	    configured value is a starting point; it is automatically
+	    adjusted downward if the server is partially or completely
+	    non-responsive. The algorithm used to adjust the quota can be
+	    configured via the "fetch-quota-params" option.
+	  + "fetches-per-zone" limits the number of simultaneous queries
+	    that can be sent for names within a single domain.  (Note:
+	    Unlike "fetches-per-server", this value is not self-tuning.)
+	  + New stats counters have been added to count
+	    queries spilled due to these quotas.
+	- Added a new "dnssec-keymgr" key mainenance utility, which can
+	  generate or update keys as needed to ensure that a zone's
+	  keys match a defined DNSSEC policy.
+	- The experimental "SIT" feature in BIND 9.10 has been renamed
+	  "COOKIE" and is no longer optional. EDNS COOKIE is a mechanism
+	  enabling clients to detect off-path spoofed responses, and
+	  servers to detect spoofed-source queries.  Clients that identify
+	  themselves using COOKIE options are not subject to response rate
+	  limiting (RRL) and can receive larger UDP responses.
+	- SERVFAIL responses can now be cached for a limited time
+	  (defaulting to 1 second, with an upper limit of 30).
+	  This can reduce the frequency of retries when a query is
+	  persistently failing.
+	- Added an "nsip-wait-recurse" switch to RPZ. This causes NSIP
+	  rules to be skipped if a name server IP address isn't in the
+	  cache yet; the address will be looked up and the rule will be
+	  applied on future queries.
+	- Added a Python RNDC module. This allows multiple commands to
+	  sent over a persistent RNDC channel, which saves time.
+	- The "controls" block in named.conf can now grant read-only
+	  "rndc" access to specified clients or keys. Read-only clients
+	  could, for example, check "rndc status" but could not
+	  reconfigure or shut down the server.
+	- "rndc" commands can now return arbitrarily large amounts of
+	  text to the caller.
+	- The zone serial number of a dynamically updatable zone
+	  can now be set via "rndc signing -serial <number> <zonename>".
+	  This allows inline-signing zones to be set to a specific
+	  serial number.
+	- The new "rndc nta" command can be used to set a Negative
+	  Trust Anchor (NTA), disabling DNSSEC validation for a
+	  specific domain; this can be used when responses from a
+	  domain are known to be failing validation due to administrative
+	  error rather than because of a spoofing attack.  Negative
+	  trust anchors are strictly temporary; by default they expire
+	  after one hour, but can be configured to last up to one week.
+	- "rndc delzone" can now be used on zones that were not originally
+	  created by "rndc addzone".
+	- "rndc modzone" reconfigures a single zone, without requiring
+	  the entire server to be reconfigured.
+	- "rndc showzone" displays the current configuration of a zone.
+	- "rndc managed-keys" can be used to check the status of RFC 5001
+	  managed trust anchors, or to force trust anchors to be refreshed.
+	- "max-cache-size" can now be set to a percentage of available
+	  memory. The default is 90%.
+	- Update forwarding performance has been improved by allowing
+	  a single TCP connection to be shared by multiple updates.
+	- The EDNS Client Subnet (ECS) option is now supported for
+	  authoritative servers; if a query contains an ECS option
+	  then ACLs containing "geoip" or "ecs" elements can match
+	  against the the address encoded in the option.  This can be
+	  used to select a view for a query, so that different answers
+	  can be provided depending on the client network.
+	- The EDNS EXPIRE option has been implemented on the client
+	  side, allowing a slave server to set the expiration timer
+	  correctly when transferring zone data from another slave
+	  server.
+	- The key generation and manipulation tools (dnssec-keygen,
+	  dnssec-settime, dnssec-importkey, dnssec-keyfromlabel) now
+	  take "-Psync" and "-Dsync" options to set the publication
+	  and deletion times of CDS and CDNSKEY parent-synchronization
+	  records.  Both named and dnssec-signzone can now publish and
+	  remove these records at the scheduled times.
+	- A new "minimal-any" option reduces the size of UDP responses
+	  for query type ANY by returning a single arbitrarily selected
+	  RRset instead of all RRsets.
+	- A new "masterfile-style" zone option controls the formatting
+	  of text zone files:  When set to "full", a zone file is dumped
+	  in single-line-per-record format.
+	- "serial-update-method" can now be set to "date". On update,
+	  the serial number will be set to the current date in YYYYMMDDNN
+	  format.
+	- "dnssec-signzone -N date" sets the serial number to YYYYMMDDNN.
+	- "named -L <filename>" causes named to send log messages to
+	   the specified file by default instead of to the system log.
+	- "dig +ttlunits" prints TTL values with time-unit suffixes:
+	  w, d, h, m, s for weeks, days, hours, minutes, and seconds.
+	- "dig +unknownformat" prints dig output in RFC 3597 "unknown
+	  record" presentation format.
+	- "dig +ednsopt" allows dig to set arbitrary EDNS options on
+	  requests.
+	- "dig +ednsflags" allows dig to set yet-to-be-defined EDNS
+	  flags on requests.
+	- "mdig" is an alternate version of dig which sends multiple
+	  pipelined TCP queries to a server.  Instead of waiting for a
+	  response after sending a query, it sends all queries
+	  immediately and displays responses in the order received.
+	- "serial-query-rate" no longer controls NOTIFY messages.
+	  These are separately controlled by "notify-rate" and
+	  "startup-notify-rate".
+	- "nsupdate" now performs "check-names" processing by default
+	  on records to be added.  This can be disabled with
+	  "check-names no".
+	- The statistics channel now supports DEFLATE compression,
+	  reducing the size of the data sent over the network when
+	  querying statistics.
+	- New counters have been added to the statistics channel
+	  to track the sizes of incoming queries and outgoing responses in
+	  histogram buckets, as specified in RSSAC002.
+	- A new NXDOMAIN redirect method (option "nxdomain-redirect")
+	  has been added, allowing redirection to a specified DNS
+	  namespace instead of a single redirect zone.
+	- When starting up, named now ensures that no other named
+	  process is already running.
+	- Files created by named to store information, including "mkeys"
+	  and "nzf" files, are now named after their corresponding views
+	  unless the view name contains characters incompatible with use
+	  as a filename. Old style filenames (based on the hash of the
+	  view name) will still work.
 
+	This release addresses the security flaws described in
+	CVE-2014-3214, CVE-2014-3859, CVE-2014-8500, CVE-2014-8680,
+	CVE-2015-1349, CVE-2015-5477, CVE-2015-5722, CVE-2015-5986,
+	CVE-2015-8000, CVE-2015-8704, CVE-2015-8705, CVE-2016-1285,
+	CVE-2016-1286, CVE-2016-2088, CVE-2016-2775 and CVE-2016-2776.
 
 Building
 
@@ -135,9 +237,9 @@ Building
 		Ubuntu 7.04, 7.10
 		Windows XP/2003/2008
 
-        NOTE:  As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
-        Windows, including Windows NT and Windows 2000, are no longer
-        supported.
+	NOTE:  As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
+	Windows, including Windows NT and Windows 2000, are no longer
+	supported.
 
 	We have recent reports from the user community that a supported
 	version of BIND will build and run on the following systems:
@@ -166,15 +268,16 @@ Building
 	configure will affect compilation:
 
 	    CC
-		The C compiler to use.	configure tries to figure
+		The C compiler to use.  configure tries to figure
 		out the right one for supported systems.
 
 	    CFLAGS
 		C compiler flags.  Defaults to include -g and/or -O2
-		as supported by the compiler.  
+		as supported by the compiler.  Please include '-g'
+		if you need to set CFLAGS.
 
 	    STD_CINCLUDES
-		System header file directories.	 Can be used to specify
+		System header file directories.  Can be used to specify
 		where add-on thread or IPv6 support is, for example.
 		Defaults to empty string.
 
@@ -184,13 +287,14 @@ Building
 
 		Possible settings:
 		Change the default syslog facility of named/lwresd.
-		  -DISC_FACILITY=LOG_LOCAL0	
+		  -DISC_FACILITY=LOG_LOCAL0
 		Enable DNSSEC signature chasing support in dig.
+		  (This feature is deprecated. Use `delv` instead.)
 		  -DDIG_SIGCHASE=1 (sets -DDIG_SIGCHASE_TD=1 and
 				    -DDIG_SIGCHASE_BU=1)
 		Disable dropping queries from particular well known ports.
 		  -DNS_CLIENT_DROPPORT=0
-	        Sibling glue checking in named-checkzone is enabled by default.
+		Sibling glue checking in named-checkzone is enabled by default.
 		To disable the default check set.  -DCHECK_SIBLING=0
 		named-checkzone checks out-of-zone addresses by default.
 		To disable this default set.  -DCHECK_LOCAL=0
@@ -212,35 +316,60 @@ Building
 	    BUILD_CFLAGS (optional)
 	    BUILD_CPPFLAGS (optional)
 		Possible Settings:
-		-DNEED_OPTARG=1		(optarg is not declared in <unistd.h>)
+		-DNEED_OPTARG=1         (optarg is not declared in <unistd.h>)
 	    BUILD_LDFLAGS (optional)
 	    BUILD_LIBS (optional)
 
+	On most platforms, BIND 9 is built with multithreading
+	support, allowing it to take advantage of multiple CPUs.
+	You can configure this by specifying "--enable-threads" or
+	"--disable-threads" on the configure command line.  The default
+	is to enable threads, except on some older operating systems
+	on which threads are known to have had problems in the past.
+	(Note: Prior to BIND 9.10, the default was to disable threads on
+	Linux systems; this has been reversed.  On Linux systems, the
+	threaded build is known to change BIND's behavior with respect
+	to file permissions; it may be necessary to specify a user with
+	the -u option when running named.)
+
 	To build shared libraries, specify "--with-libtool" on the
 	configure command line.
 
+	Certain compiled-in constants and default settings can be
+	increased to values better suited to large servers with abundant
+	memory resources (e.g, 64-bit servers with 12G or more of memory)
+	by specifying "--with-tuning=large" on the configure command
+	line. This can improve performance on big servers, but will
+	consume more memory and may degrade performance on smaller
+	systems.
+
 	For the server to support DNSSEC, you need to build it
-	with crypto support.  You must have OpenSSL 0.9.5a
+	with crypto support.  You must have OpenSSL 1.0.1t
 	or newer installed and specify "--with-openssl" on the
 	configure command line.  If OpenSSL is installed under
 	a nonstandard prefix, you can tell configure where to
 	look for it using "--with-openssl=/prefix".
 
-	On some platforms it is necessary to explictly request large
+	To support the HTTP statistics channel, the server must
+	be linked with at least one of the following: libxml2
+	(http://xmlsoft.org) or json-c (https://github.com/json-c).
+	If these are installed at a nonstandard prefix, use
+	"--with-libxml2=/prefix" or "--with-libjson=/prefix".
+
+	To support compression on the HTTP statistics channel, the
+	server must be linked against libzlib (--with-zlib=/prefix).
+
+	Python requires 'argparse' and 'ply' to be available.
+	'argparse' is a standard module as of Python 2.7 and Python 3.2.
+
+	On some platforms it is necessary to explicitly request large
 	file support to handle files bigger than 2GB.  This can be
 	done by "--enable-largefile" on the configure command line.
 
-	On some platforms, BIND 9 can be built with multithreading
-	support, allowing it to take advantage of multiple CPUs.
-	You can specify whether to build a multithreaded BIND 9 
-	by specifying "--enable-threads" or "--disable-threads"
-	on the configure command line.  The default is operating
-	system dependent.
-
-        Support for the "fixed" rrset-order option can be enabled
-        or disabled by specifying "--enable-fixed-rrset" or
-        "--disable-fixed-rrset" on the configure command line.
-        The default is "disabled", to reduce memory footprint.
+	Support for the "fixed" rrset-order option can be enabled
+	or disabled by specifying "--enable-fixed-rrset" or
+	"--disable-fixed-rrset" on the configure command line.
+	The default is "disabled", to reduce memory footprint.
 
 	If your operating system has integrated support for IPv6, it
 	will be used automatically.  If you have installed KAME IPv6
@@ -250,7 +379,7 @@ Building
 	By default, installation is into /usr/local, but this can be changed
 	with the "--prefix" option when running "configure".
 
-	You may specify the option "--sysconfdir" to set the directory 
+	You may specify the option "--sysconfdir" to set the directory
 	where configuration files like "named.conf" go by default,
 	and "--localstatedir" to set the default parent directory
 	of "run/named.pid".   For backwards compatibility with BIND 8,
@@ -260,7 +389,7 @@ Building
 	defaults to "$prefix/var".
 
 	To see additional configure options, run "configure --help".
-	Note that the help message does not reflect the BIND 8 
+	Note that the help message does not reflect the BIND 8
 	compatibility defaults for sysconfdir and localstatedir.
 
 	If you're planning on making changes to the BIND 9 source, you
@@ -272,7 +401,7 @@ Building
 
 	Building with gcc is not supported, unless gcc is the vendor's usual
 	compiler (e.g. the various BSD systems, Linux).
-	
+
 	Known compiler issues:
 	* gcc-3.2.1 and gcc-3.1.1 is known to cause problems with solaris-x86.
 	* gcc prior to gcc-3.2.3 ultrasparc generates incorrect code at -02.
@@ -288,6 +417,10 @@ Building
 	libraries.  sh-utils-1.16 provides a "printf" which compiles
 	on SunOS 4.
 
+Known limitations
+
+	Linux requires kernel build 2.6.39 or later to get the
+	performance benefits from using multiple sockets.
 
 Documentation
 
@@ -307,44 +440,54 @@ Documentation
 	Frequently asked questions and their answers can be found in
 	FAQ.
 
-        Additional information on various subjects can be found
-        in the other README files.
+	Additional information on various subjects can be found
+	in the other README files.
 
 
 Change Log
 
-	A detailed list of all changes to BIND 9 is included in the 
+	A detailed list of all changes to BIND 9 is included in the
 	file CHANGES, with the most recent changes listed first.
 	Change notes include tags indicating the category of the
 	change that was made; these categories are:
 
-	   [func]	  New feature
+	   [func]         New feature
 
-	   [bug]	  General bug fix
+	   [bug]          General bug fix
 
-	   [security]	  Fix for a significant security flaw
+	   [security]     Fix for a significant security flaw
 
 	   [experimental] Used for new features when the syntax
-	   		  or other aspects of the design are still
+			  or other aspects of the design are still
 			  in flux and may change
 
-	   [port]	  Portability enhancement
+	   [port]         Portability enhancement
 
-	   [maint]	  Updates to built-in data such as root
+	   [maint]        Updates to built-in data such as root
 			  server addresses and keys
 
-	   [tuning]	  Changes to built-in configuration defaults
-	   		  and constants to improve performanceo
+	   [tuning]       Changes to built-in configuration defaults
+			  and constants to improve performance
 
-	   [protocol]	  Updates to the DNS protocol such as new
+	   [performance]  Other changes to improve server performance
+
+	   [protocol]     Updates to the DNS protocol such as new
 			  RR types
 
-           [test]         Changes to the automatic tests, not
-                          affecting server functionality
+	   [test]         Changes to the automatic tests, not
+			  affecting server functionality
 
-           [cleanup]      Minor corrections and refactoring
+	   [cleanup]      Minor corrections and refactoring
 
-	   [doc]	  Documentation
+	   [doc]          Documentation
+
+	   [contrib]	  Changes to the contributed tools and
+			  libraries in the 'contrib' subdirectory
+
+	   [placeholder]  Used in the master development branch to
+			  reserve change numbers for use in other
+			  branches, e.g. when fixing a bug that only
+			  exists in older releases
 
 	In general, [func] and [experimental] tags will only appear
 	in new-feature releases (i.e., those with version numbers
@@ -355,22 +498,36 @@ Change Log
 
 Bug Reports and Mailing Lists
 
-	Bugs reports should be sent to
+	Bug reports should be sent to:
 
 		bind9-bugs@isc.org
 
-	To join the BIND Users mailing list, send mail to
+	Feature requests can be sent to:
 
-		bind-users-request@isc.org
+		bind-suggest@isc.org
 
-	archives of which can be found via
+	To join or view the archives of the BIND Users mailing list,
+	visit:
 
-		http://www.isc.org/ops/lists/
+		https://lists.isc.org/mailman/listinfo/bind-users
 
 	If you're planning on making changes to the BIND 9 source
-	code, you might want to join the BIND Workers mailing list.
-	Send mail to
+	code, you may also want to join the BIND Workers mailing
+	list:
 
-		bind-workers-request@isc.org
+		https://lists.isc.org/mailman/listinfo/bind-workers
+
+	Information on read-only Git access, coding style and developer
+	guidelines can be found at:
+
+		http://www.isc.org/git/
 
 
+Acknowledgments
+
+	- This product includes software developed by the OpenSSL Project
+	  for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/).
+	- This product includes cryptographic software written by Eric
+	  Young (eay@cryptsoft.com).
+	- This product includes software written by Tim Hudson
+	  (tjh@cryptsoft.com).

REDIRECT-NOTES

@@ -1,35 +0,0 @@
-Redirect zones are used to find answers to queries when normal resolution
-would result in NXDOMAIN being returned.  Only one redirect zone per view
-is currently supported.
-
-To redirect to 100.100.100.2 and 2001:ffff:ffff::100.100.100.2 on NXDOMAIN
-one would configure the redirect zone like this.
-
-zone "." {
-	type redirect;
-	file "redirect.db";
-};
-
-redirect.db:
-$TTL 300
-@ IN SOA ns.example.net hostmaster.example.net 0 0 0 0 0
-@ IN NS ns.example.net
-;
-; NS records do not need address records in this zone as it is not in the
-; normal namespace.
-;
-*. IN A 100.100.100.2
-*. IN AAAA 2001:ffff:ffff::100.100.100.2
-
-To redirect all Spanish names (under .ES) one would use entries like these:
-
-*.ES. IN A 100.100.100.3
-*.ES. IN AAAA 2001:ffff:ffff::100.100.100.3
-
-To redirect all commercial Spanish names (under COM.ES) one would use
-entries like these:
-*.COM.ES. IN A 100.100.100.4
-*.COM.ES. IN AAAA 2001:ffff:ffff::100.100.100.4
-
-The redirect zone supports all possible types.  It is not limited to
-A and AAAA record.

acconfig.h

@@ -1,18 +1,9 @@
 /*
- * Copyright (C) 2004, 2005, 2007, 2008  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 1999-2003  Internet Software Consortium.
+ * Copyright (C) 1999-2005, 2007, 2008, 2012, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: acconfig.h,v 1.53 2008/12/01 23:47:44 tbox Exp $ */
@@ -70,9 +61,6 @@
 /** define if gai_strerror() exists */
 #undef HAVE_GAISTRERROR
 
-/** define if arc4random() exists */
-#undef HAVE_ARC4RANDOM
-
 /**
  * define if pthread_setconcurrency() should be called to tell the
  * OS how many threads we might want to run.
@@ -132,14 +120,17 @@ int sigwait(const unsigned int *set, int *sig);
 /** define if you have strerror in the C library. */
 #undef HAVE_STRERROR
 
-/** Define if you are running under Compaq TruCluster. */
-#undef HAVE_TRUCLUSTER
-
 /* Define if OpenSSL includes DSA support */
 #undef HAVE_OPENSSL_DSA
 
+/* Define if you have getpassphrase in the C library. */
+#undef HAVE_GETPASSPHRASE
+
 /* Define to the length type used by the socket API (socklen_t, size_t, int). */
 #undef ISC_SOCKADDR_LEN_T
 
 /* Define if threads need PTHREAD_SCOPE_SYSTEM */
 #undef NEED_PTHREAD_SCOPE_SYSTEM
+
+/* Define to 1 if you have the uname library function. */
+#undef HAVE_UNAME

aclocal.m4

@@ -1,2 +1,17 @@
-sinclude(./libtool.m4)dnl
+sinclude(libtool.m4/libtool.m4)dnl
+sinclude(libtool.m4/ltoptions.m4)dnl
+sinclude(libtool.m4/ltsugar.m4)dnl
+sinclude(libtool.m4/ltversion.m4)dnl
+sinclude(libtool.m4/lt~obsolete.m4)dnl
 
+m4_divert_text(HELP_CANON, [[
+  NOTE: If PREFIX is not set, then the default values for --sysconfdir
+  and --localstatedir are /etc and /var, respectively.]])
+m4_divert_text(HELP_END, [[
+Professional support for BIND is provided by Internet Systems Consortium,
+Inc.  Information about paid support and training options is available at
+https://www.isc.org/support.
+
+Help can also often be found on the BIND Users mailing list
+(https://lists.isc.org/mailman/listinfo/bind-users) or in the #bind
+channel of the Freenode IRC service.]])

autogen.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+#
+# Copyright (C) 2015, 2016  Internet Systems Consortium, Inc. ("ISC")
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# Run this script after modifying configure.in to generate configure
+autoreconf -i

bin/Makefile.in

@@ -1,17 +1,8 @@
-# Copyright (C) 2004, 2007, 2009  Internet Systems Consortium, Inc. ("ISC")
-# Copyright (C) 1998-2001  Internet Software Consortium.
+# Copyright (C) 1998-2001, 2004, 2007, 2009, 2012-2014, 2016  Internet Systems Consortium, Inc. ("ISC")
 #
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
 
 # $Id: Makefile.in,v 1.29 2009/10/05 12:07:08 fdupont Exp $
 
@@ -19,8 +10,8 @@ srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-SUBDIRS =	named rndc dig dnssec tests tools nsupdate \
-		check confgen @PKCS11_TOOLS@
+SUBDIRS =	named rndc dig delv dnssec tools tests nsupdate \
+		check confgen @NZD_TOOLS@ @PYTHON_TOOLS@ @PKCS11_TOOLS@
 TARGETS =
 
 @BIND9_MAKE_RULES@

bin/check/.cvsignore

@@ -1,6 +0,0 @@
-Makefile
-.libs
-*.la
-*.lo
-named-checkconf
-named-checkzone

bin/check/.gitignore

@@ -0,0 +1,3 @@
+.libs
+named-checkconf
+named-checkzone

bin/check/Makefile.in

@@ -1,17 +1,8 @@
-# Copyright (C) 2004-2007, 2009  Internet Systems Consortium, Inc. ("ISC")
-# Copyright (C) 2000-2003  Internet Software Consortium.
+# Copyright (C) 2000-2007, 2009, 2012, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
 #
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
 
 # $Id: Makefile.in,v 1.36 2009/12/05 23:31:40 each Exp $
 
@@ -19,14 +10,14 @@ srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-@BIND9_VERSION@
+VERSION=@BIND9_VERSION@
 
 @BIND9_MAKE_INCLUDES@
 
 CINCLUDES =	${BIND9_INCLUDES} ${DNS_INCLUDES} ${ISCCFG_INCLUDES} \
-		${ISC_INCLUDES}
+		${ISC_INCLUDES} @DST_OPENSSL_INC@
 
-CDEFINES = 	-DNAMED_CONFFILE=\"${sysconfdir}/named.conf\"
+CDEFINES = 	@CRYPTO@ -DNAMED_CONFFILE=\"${sysconfdir}/named.conf\"
 CWARNINGS =
 
 DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
@@ -70,7 +61,7 @@ named-checkzone.@O@: named-checkzone.c
 		-c ${srcdir}/named-checkzone.c
 
 named-checkconf@EXEEXT@: named-checkconf.@O@ check-tool.@O@ ${ISCDEPLIBS} \
-		${ISCCFGDEPLIBS} ${BIND9DEPLIBS}
+		${DNSDEPLIBS} ${ISCCFGDEPLIBS} ${BIND9DEPLIBS}
 	export BASEOBJS="named-checkconf.@O@ check-tool.@O@"; \
 	export LIBS0="${BIND9LIBS} ${ISCCFGLIBS} ${DNSLIBS}"; \
 	${FINALBUILDCMD}
@@ -96,5 +87,12 @@ install:: named-checkconf@EXEEXT@ named-checkzone@EXEEXT@ installdirs
 	for m in ${MANPAGES}; do ${INSTALL_DATA} ${srcdir}/$$m ${DESTDIR}${mandir}/man8; done
 	(cd ${DESTDIR}${mandir}/man8; rm -f named-compilezone.8; ${LINK_PROGRAM} named-checkzone.8 named-compilezone.8)
 
+uninstall::
+	rm -f ${DESTDIR}${mandir}/man8/named-compilezone.8
+	for m in ${MANPAGES}; do rm -f ${DESTDIR}${mandir}/man8/$$m ; done
+	rm -f ${DESTDIR}${sbindir}/named-compilezone@EXEEXT@
+	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkconf@EXEEXT@
+	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkzone@EXEEXT@
+
 clean distclean::
 	rm -f ${TARGETS} r1.htm

bin/check/check-tool.c

@@ -1,18 +1,9 @@
 /*
- * Copyright (C) 2004-2011  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 2000-2002  Internet Software Consortium.
+ * Copyright (C) 2000-2002, 2004-2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: check-tool.c,v 1.44 2011/12/22 07:32:39 each Exp $ */
@@ -33,6 +24,7 @@
 #include <isc/mem.h>
 #include <isc/netdb.h>
 #include <isc/net.h>
+#include <isc/print.h>
 #include <isc/region.h>
 #include <isc/stdio.h>
 #include <isc/string.h>
@@ -40,12 +32,17 @@
 #include <isc/types.h>
 #include <isc/util.h>
 
+#include <dns/db.h>
+#include <dns/dbiterator.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
 #include <dns/name.h>
 #include <dns/rdata.h>
 #include <dns/rdataclass.h>
 #include <dns/rdataset.h>
+#include <dns/rdatasetiter.h>
+#include <dns/rdatatype.h>
+#include <dns/result.h>
 #include <dns/types.h>
 #include <dns/zone.h>
 
@@ -86,6 +83,7 @@
 static const char *dbtype[] = { "rbt" };
 
 int debug = 0;
+const char *journal = NULL;
 isc_boolean_t nomerge = ISC_TRUE;
 #if CHECK_LOCAL
 isc_boolean_t docheckmx = ISC_TRUE;
@@ -107,6 +105,7 @@ unsigned int zone_options = DNS_ZONEOPT_CHECKNS |
 			    DNS_ZONEOPT_CHECKWILDCARD |
 			    DNS_ZONEOPT_WARNMXCNAME |
 			    DNS_ZONEOPT_WARNSRVCNAME;
+unsigned int zone_options2 = 0;
 
 /*
  * This needs to match the list in bin/named/log.c.
@@ -196,6 +195,10 @@ checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
 		a->type == dns_rdatatype_a);
 	REQUIRE(aaaa == NULL || !dns_rdataset_isassociated(aaaa) ||
 		aaaa->type == dns_rdatatype_aaaa);
+
+	if (a == NULL || aaaa == NULL)
+		return (answer);
+
 	memset(&hints, 0, sizeof(hints));
 	hints.ai_flags = AI_CANONNAME;
 	hints.ai_family = PF_UNSPEC;
@@ -258,8 +261,7 @@ checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
 		}
 		return (ISC_TRUE);
 	}
-	if (a == NULL || aaaa == NULL)
-		return (answer);
+
 	/*
 	 * Check that all glue records really exist.
 	 */
@@ -573,11 +575,93 @@ setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp) {
 	return (ISC_R_SUCCESS);
 }
 
+/*% scan the zone for oversize TTLs */
+static isc_result_t
+check_ttls(dns_zone_t *zone, dns_ttl_t maxttl) {
+	isc_result_t result;
+	dns_db_t *db = NULL;
+	dns_dbversion_t *version = NULL;
+	dns_dbnode_t *node = NULL;
+	dns_dbiterator_t *dbiter = NULL;
+	dns_rdatasetiter_t *rdsiter = NULL;
+	dns_rdataset_t rdataset;
+	dns_fixedname_t fname;
+	dns_name_t *name;
+	dns_fixedname_init(&fname);
+	name = dns_fixedname_name(&fname);
+	dns_rdataset_init(&rdataset);
+
+	CHECK(dns_zone_getdb(zone, &db));
+	INSIST(db != NULL);
+
+	CHECK(dns_db_newversion(db, &version));
+	CHECK(dns_db_createiterator(db, 0, &dbiter));
+
+	for (result = dns_dbiterator_first(dbiter);
+	     result == ISC_R_SUCCESS;
+	     result = dns_dbiterator_next(dbiter)) {
+		result = dns_dbiterator_current(dbiter, &node, name);
+		if (result == DNS_R_NEWORIGIN)
+			result = ISC_R_SUCCESS;
+		CHECK(result);
+
+		CHECK(dns_db_allrdatasets(db, node, version, 0, &rdsiter));
+		for (result = dns_rdatasetiter_first(rdsiter);
+		     result == ISC_R_SUCCESS;
+		     result = dns_rdatasetiter_next(rdsiter)) {
+			dns_rdatasetiter_current(rdsiter, &rdataset);
+			if (rdataset.ttl > maxttl) {
+				char nbuf[DNS_NAME_FORMATSIZE];
+				char tbuf[255];
+				isc_buffer_t b;
+				isc_region_t r;
+
+				dns_name_format(name, nbuf, sizeof(nbuf));
+				isc_buffer_init(&b, tbuf, sizeof(tbuf) - 1);
+				CHECK(dns_rdatatype_totext(rdataset.type, &b));
+				isc_buffer_usedregion(&b, &r);
+				r.base[r.length] = 0;
+
+				dns_zone_log(zone, ISC_LOG_ERROR,
+					     "%s/%s TTL %d exceeds "
+					     "maximum TTL %d",
+					     nbuf, tbuf, rdataset.ttl, maxttl);
+				dns_rdataset_disassociate(&rdataset);
+				CHECK(ISC_R_RANGE);
+			}
+			dns_rdataset_disassociate(&rdataset);
+		}
+		if (result == ISC_R_NOMORE)
+			result = ISC_R_SUCCESS;
+		CHECK(result);
+
+		dns_rdatasetiter_destroy(&rdsiter);
+		dns_db_detachnode(db, &node);
+	}
+
+	if (result == ISC_R_NOMORE)
+		result = ISC_R_SUCCESS;
+
+ cleanup:
+	if (node != NULL)
+		dns_db_detachnode(db, &node);
+	if (rdsiter != NULL)
+		dns_rdatasetiter_destroy(&rdsiter);
+	if (dbiter != NULL)
+		dns_dbiterator_destroy(&dbiter);
+	if (version != NULL)
+		dns_db_closeversion(db, &version, ISC_FALSE);
+	if (db != NULL)
+		dns_db_detach(&db);
+
+	return (result);
+}
+
 /*% load the zone */
 isc_result_t
 load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	  dns_masterformat_t fileformat, const char *classname,
-	  dns_zone_t **zonep)
+	  dns_ttl_t maxttl, dns_zone_t **zonep)
 {
 	isc_result_t result;
 	dns_rdataclass_t rdclass;
@@ -597,7 +681,7 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 
 	dns_zone_settype(zone, dns_zone_master);
 
-	isc_buffer_init(&buffer, zonename, strlen(zonename));
+	isc_buffer_constinit(&buffer, zonename, strlen(zonename));
 	isc_buffer_add(&buffer, strlen(zonename));
 	dns_fixedname_init(&fixorigin);
 	origin = dns_fixedname_name(&fixorigin);
@@ -605,6 +689,8 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	CHECK(dns_zone_setorigin(zone, origin));
 	CHECK(dns_zone_setdbtype(zone, 1, (const char * const *) dbtype));
 	CHECK(dns_zone_setfile2(zone, filename, fileformat));
+	if (journal != NULL)
+		CHECK(dns_zone_setjournal(zone, journal));
 
 	DE_CONST(classname, region.base);
 	region.length = strlen(classname);
@@ -612,7 +698,11 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 
 	dns_zone_setclass(zone, rdclass);
 	dns_zone_setoption(zone, zone_options, ISC_TRUE);
+	dns_zone_setoption2(zone, zone_options2, ISC_TRUE);
 	dns_zone_setoption(zone, DNS_ZONEOPT_NOMERGE, nomerge);
+
+	dns_zone_setmaxttl(zone, maxttl);
+
 	if (docheckmx)
 		dns_zone_setcheckmx(zone, checkmx);
 	if (docheckns)
@@ -621,6 +711,15 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 		dns_zone_setchecksrv(zone, checksrv);
 
 	CHECK(dns_zone_load(zone));
+
+	/*
+	 * When loading map files we can't catch oversize TTLs during
+	 * load, so we check for them here.
+	 */
+	if (fileformat == dns_masterformat_map && maxttl != 0) {
+		CHECK(check_ttls(zone, maxttl));
+	}
+
 	if (zonep != NULL) {
 		*zonep = zone;
 		zone = NULL;
@@ -640,6 +739,9 @@ dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
 {
 	isc_result_t result;
 	FILE *output = stdout;
+	const char *flags;
+
+	flags = (fileformat == dns_masterformat_text) ? "w+" : "wb+";
 
 	if (debug) {
 		if (filename != NULL && strcmp(filename, "-") != 0)
@@ -650,7 +752,7 @@ dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
 	}
 
 	if (filename != NULL && strcmp(filename, "-") != 0) {
-		result = isc_stdio_open(filename, "w+", &output);
+		result = isc_stdio_open(filename, flags, &output);
 
 		if (result != ISC_R_SUCCESS) {
 			fprintf(stderr, "could not open output "

bin/check/check-tool.h

@@ -1,18 +1,9 @@
 /*
- * Copyright (C) 2004, 2005, 2007, 2010, 2011  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 2000-2002  Internet Software Consortium.
+ * Copyright (C) 2000-2002, 2004, 2005, 2007, 2010, 2011, 2013, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: check-tool.h,v 1.18 2011/12/09 23:47:02 tbox Exp $ */
@@ -37,7 +28,7 @@ setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp);
 isc_result_t
 load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	  dns_masterformat_t fileformat, const char *classname,
-	  dns_zone_t **zonep);
+	  dns_ttl_t maxttl, dns_zone_t **zonep);
 
 isc_result_t
 dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
@@ -50,11 +41,13 @@ void DestroySockets(void);
 #endif
 
 extern int debug;
+extern const char *journal;
 extern isc_boolean_t nomerge;
 extern isc_boolean_t docheckmx;
 extern isc_boolean_t docheckns;
 extern isc_boolean_t dochecksrv;
 extern unsigned int zone_options;
+extern unsigned int zone_options2;
 
 ISC_LANG_ENDDECLS
 

bin/check/named-checkconf.8

@@ -1,119 +1,135 @@
-.\" Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
-.\" Copyright (C) 2000-2002 Internet Software Consortium.
+.\" Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
 .\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
-.\" purpose with or without fee is hereby granted, provided that the above
-.\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
-.\"
-.\" $Id: named-checkconf.8,v 1.33 2009/12/29 01:14:03 tbox Exp $
+.\" This Source Code Form is subject to the terms of the Mozilla Public
+.\" License, v. 2.0. If a copy of the MPL was not distributed with this
+.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
 .\"
 .hy 0
 .ad l
-.\"     Title: named\-checkconf
+'\" t
+.\"     Title: named-checkconf
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
-.\"      Date: June 14, 2000
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\"      Date: 2014-01-10
 .\"    Manual: BIND9
-.\"    Source: BIND9
+.\"    Source: ISC
+.\"  Language: English
 .\"
-.TH "NAMED\-CHECKCONF" "8" "June 14, 2000" "BIND9" "BIND9"
+.TH "NAMED\-CHECKCONF" "8" "2014\-01\-10" "ISC" "BIND9"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
 .SH "NAME"
-named\-checkconf \- named configuration file syntax checking tool
+named-checkconf \- named configuration file syntax checking tool
 .SH "SYNOPSIS"
-.HP 16
-\fBnamed\-checkconf\fR [\fB\-h\fR] [\fB\-v\fR] [\fB\-j\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] {filename} [\fB\-p\fR] [\fB\-z\fR]
+.HP \w'\fBnamed\-checkconf\fR\ 'u
+\fBnamed\-checkconf\fR [\fB\-hjvz\fR] [\fB\-p\fR\ [\fB\-x\fR\ ]] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] {filename}
 .SH "DESCRIPTION"
 .PP
 \fBnamed\-checkconf\fR
 checks the syntax, but not the semantics, of a
 \fBnamed\fR
-configuration file. The file is parsed and checked for syntax errors, along with all files included by it. If no file is specified,
-\fI/etc/named.conf\fR
-is read by default.
+configuration file\&. The file is parsed and checked for syntax errors, along with all files included by it\&. If no file is specified,
+/etc/named\&.conf
+is read by default\&.
 .PP
 Note: files that
 \fBnamed\fR
 reads in separate parser contexts, such as
-\fIrndc.key\fR
+rndc\&.key
 and
-\fIbind.keys\fR, are not automatically read by
-\fBnamed\-checkconf\fR. Configuration errors in these files may cause
+bind\&.keys, are not automatically read by
+\fBnamed\-checkconf\fR\&. Configuration errors in these files may cause
 \fBnamed\fR
 to fail to run, even if
 \fBnamed\-checkconf\fR
-was successful.
+was successful\&.
 \fBnamed\-checkconf\fR
-can be run on these files explicitly, however.
+can be run on these files explicitly, however\&.
 .SH "OPTIONS"
 .PP
 \-h
 .RS 4
-Print the usage summary and exit.
+Print the usage summary and exit\&.
+.RE
+.PP
+\-j
+.RS 4
+When loading a zonefile read the journal if it exists\&.
+.RE
+.PP
+\-p
+.RS 4
+Print out the
+named\&.conf
+and included files in canonical form if no errors were detected\&. See also the
+\fB\-x\fR
+option\&.
 .RE
 .PP
 \-t \fIdirectory\fR
 .RS 4
 Chroot to
-\fIdirectory\fR
-so that include directives in the configuration file are processed as if run by a similarly chrooted named.
+directory
+so that include directives in the configuration file are processed as if run by a similarly chrooted
+\fBnamed\fR\&.
 .RE
 .PP
 \-v
 .RS 4
 Print the version of the
 \fBnamed\-checkconf\fR
-program and exit.
+program and exit\&.
 .RE
 .PP
-\-p
+\-x
 .RS 4
-Print out the
-\fInamed.conf\fR
-and included files in canonical form if no errors were detected.
+When printing the configuration files in canonical form, obscure shared secrets by replacing them with strings of question marks (\*(Aq?\*(Aq)\&. This allows the contents of
+named\&.conf
+and related files to be shared \(em for example, when submitting bug reports \(em without compromising private data\&. This option cannot be used without
+\fB\-p\fR\&.
 .RE
 .PP
 \-z
 .RS 4
 Perform a test load of all master zones found in
-\fInamed.conf\fR.
-.RE
-.PP
-\-j
-.RS 4
-When loading a zonefile read the journal if it exists.
+named\&.conf\&.
 .RE
 .PP
 filename
 .RS 4
-The name of the configuration file to be checked. If not specified, it defaults to
-\fI/etc/named.conf\fR.
+The name of the configuration file to be checked\&. If not specified, it defaults to
+/etc/named\&.conf\&.
 .RE
 .SH "RETURN VALUES"
 .PP
 \fBnamed\-checkconf\fR
-returns an exit status of 1 if errors were detected and 0 otherwise.
+returns an exit status of 1 if errors were detected and 0 otherwise\&.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed\-checkzone\fR(8),
-BIND 9 Administrator Reference Manual.
+\fBnamed-checkzone\fR(8),
+BIND 9 Administrator Reference Manual\&.
 .SH "AUTHOR"
 .PP
-Internet Systems Consortium
+\fBInternet Systems Consortium, Inc\&.\fR
 .SH "COPYRIGHT"
-Copyright \(co 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2000\-2002 Internet Software Consortium.
+Copyright \(co 2000-2002, 2004, 2005, 2007, 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
 .br

bin/check/named-checkconf.c

@@ -1,18 +1,9 @@
 /*
- * Copyright (C) 2004-2007, 2009-2011  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 1999-2002  Internet Software Consortium.
+ * Copyright (C) 1999-2002, 2004-2007, 2009-2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: named-checkconf.c,v 1.56 2011/03/12 04:59:46 tbox Exp $ */
@@ -31,6 +22,7 @@
 #include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
+#include <isc/print.h>
 #include <isc/result.h>
 #include <isc/string.h>
 #include <isc/util.h>
@@ -39,10 +31,13 @@
 
 #include <bind9/check.h>
 
+#include <dns/db.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
 #include <dns/name.h>
+#include <dns/rdataclass.h>
 #include <dns/result.h>
+#include <dns/rootns.h>
 #include <dns/zone.h>
 
 #include "check-tool.h"
@@ -64,7 +59,7 @@ usage(void) ISC_PLATFORM_NORETURN_POST;
 
 static void
 usage(void) {
-	fprintf(stderr, "usage: %s [-h] [-j] [-p] [-v] [-z] [-t directory] "
+	fprintf(stderr, "usage: %s [-hjvz] [-p [-x]] [-t directory] "
 		"[named.conf]\n", program);
 	exit(1);
 }
@@ -140,15 +135,27 @@ get_checknames(const cfg_obj_t **maps, const cfg_obj_t **obj) {
 }
 
 static isc_result_t
-config_get(const cfg_obj_t **maps, const char *name, const cfg_obj_t **obj) {
-	int i;
+configure_hint(const char *zfile, const char *zclass, isc_mem_t *mctx) {
+	isc_result_t result;
+	dns_db_t *db = NULL;
+	dns_rdataclass_t rdclass;
+	isc_textregion_t r;
 
-	for (i = 0;; i++) {
-		if (maps[i] == NULL)
-			return (ISC_R_NOTFOUND);
-		if (cfg_map_get(maps[i], name, obj) == ISC_R_SUCCESS)
-			return (ISC_R_SUCCESS);
-	}
+	if (zfile == NULL)
+		return (ISC_R_FAILURE);
+
+	DE_CONST(zclass, r.base);
+	r.length = strlen(zclass);
+	result = dns_rdataclass_fromtext(&rdclass, &r);
+	if (result != ISC_R_SUCCESS)
+		return (result);
+
+	result = dns_rootns_create(mctx, rdclass, zfile, &db);
+	if (result != ISC_R_SUCCESS)
+		return (result);
+
+	dns_db_detach(&db);
+	return (ISC_R_SUCCESS);
 }
 
 /*% configure the zone */
@@ -161,16 +168,20 @@ configure_zone(const char *vclass, const char *view,
 	isc_result_t result;
 	const char *zclass;
 	const char *zname;
-	const char *zfile;
+	const char *zfile = NULL;
 	const cfg_obj_t *maps[4];
+	const cfg_obj_t *mastersobj = NULL;
+	const cfg_obj_t *inviewobj = NULL;
 	const cfg_obj_t *zoptions = NULL;
 	const cfg_obj_t *classobj = NULL;
 	const cfg_obj_t *typeobj = NULL;
 	const cfg_obj_t *fileobj = NULL;
+	const cfg_obj_t *dlzobj = NULL;
 	const cfg_obj_t *dbobj = NULL;
 	const cfg_obj_t *obj = NULL;
 	const cfg_obj_t *fmtobj = NULL;
 	dns_masterformat_t masterformat;
+	dns_ttl_t maxttl = 0;
 
 	zone_options = DNS_ZONEOPT_CHECKNS | DNS_ZONEOPT_MANYERRORS;
 
@@ -192,18 +203,53 @@ configure_zone(const char *vclass, const char *view,
 	}
 	maps[i] = NULL;
 
+	cfg_map_get(zoptions, "in-view", &inviewobj);
+	if (inviewobj != NULL)
+		return (ISC_R_SUCCESS);
+
 	cfg_map_get(zoptions, "type", &typeobj);
 	if (typeobj == NULL)
 		return (ISC_R_FAILURE);
-	if (strcasecmp(cfg_obj_asstring(typeobj), "master") != 0)
-		return (ISC_R_SUCCESS);
+
+	/*
+	 * Skip checks when using an alternate data source.
+	 */
 	cfg_map_get(zoptions, "database", &dbobj);
-	if (dbobj != NULL)
+	if (dbobj != NULL &&
+	    strcmp("rbt", cfg_obj_asstring(dbobj)) != 0 &&
+	    strcmp("rbt64", cfg_obj_asstring(dbobj)) != 0)
 		return (ISC_R_SUCCESS);
+
+	cfg_map_get(zoptions, "dlz", &dlzobj);
+	if (dlzobj != NULL)
+		return (ISC_R_SUCCESS);
+
 	cfg_map_get(zoptions, "file", &fileobj);
-	if (fileobj == NULL)
+	if (fileobj != NULL)
+		zfile = cfg_obj_asstring(fileobj);
+
+	/*
+	 * Check hints files for hint zones.
+	 * Skip loading checks for any type other than
+	 * master and redirect
+	 */
+	if (strcasecmp(cfg_obj_asstring(typeobj), "hint") == 0)
+		return (configure_hint(zfile, zclass, mctx));
+	else if ((strcasecmp(cfg_obj_asstring(typeobj), "master") != 0) &&
+		  (strcasecmp(cfg_obj_asstring(typeobj), "redirect") != 0))
+		return (ISC_R_SUCCESS);
+
+	/*
+	 * Is the redirect zone configured as a slave?
+	 */
+	if (strcasecmp(cfg_obj_asstring(typeobj), "redirect") == 0) {
+		cfg_map_get(zoptions, "masters", &mastersobj);
+		if (mastersobj != NULL)
+			return (ISC_R_SUCCESS);
+	}
+
+	if (zfile == NULL)
 		return (ISC_R_FAILURE);
-	zfile = cfg_obj_asstring(fileobj);
 
 	obj = NULL;
 	if (get_maps(maps, "check-dup-records", &obj)) {
@@ -294,6 +340,18 @@ configure_zone(const char *vclass, const char *view,
 			zone_options &= ~DNS_ZONEOPT_CHECKSIBLING;
 	}
 
+	obj = NULL;
+	if (get_maps(maps, "check-spf", &obj)) {
+		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
+			zone_options |= DNS_ZONEOPT_CHECKSPF;
+		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
+			zone_options &= ~DNS_ZONEOPT_CHECKSPF;
+		} else
+			INSIST(0);
+	} else {
+		zone_options |= DNS_ZONEOPT_CHECKSPF;
+	}
+
 	obj = NULL;
 	if (get_checknames(maps, &obj)) {
 		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
@@ -314,22 +372,30 @@ configure_zone(const char *vclass, const char *view,
 
 	masterformat = dns_masterformat_text;
 	fmtobj = NULL;
-	result = config_get(maps, "masterfile-format", &fmtobj);
-	if (result == ISC_R_SUCCESS) {
+	if (get_maps(maps, "masterfile-format", &fmtobj)) {
 		const char *masterformatstr = cfg_obj_asstring(fmtobj);
 		if (strcasecmp(masterformatstr, "text") == 0)
 			masterformat = dns_masterformat_text;
 		else if (strcasecmp(masterformatstr, "raw") == 0)
 			masterformat = dns_masterformat_raw;
+		else if (strcasecmp(masterformatstr, "map") == 0)
+			masterformat = dns_masterformat_map;
 		else
 			INSIST(0);
 	}
 
-	result = load_zone(mctx, zname, zfile, masterformat, zclass, NULL);
+	obj = NULL;
+	if (get_maps(maps, "max-zone-ttl", &obj)) {
+		maxttl = cfg_obj_asuint32(obj);
+		zone_options2 |= DNS_ZONEOPT2_CHECKTTL;
+	}
+
+	result = load_zone(mctx, zname, zfile, masterformat,
+			   zclass, maxttl, NULL);
 	if (result != ISC_R_SUCCESS)
 		fprintf(stderr, "%s/%s/%s: %s\n", view, zname, zclass,
 			dns_result_totext(result));
-	return(result);
+	return (result);
 }
 
 /*% configure a view */
@@ -366,15 +432,27 @@ configure_view(const char *vclass, const char *view, const cfg_obj_t *config,
 	return (result);
 }
 
+static isc_result_t
+config_getclass(const cfg_obj_t *classobj, dns_rdataclass_t defclass,
+		dns_rdataclass_t *classp)
+{
+	isc_textregion_t r;
+
+	if (!cfg_obj_isstring(classobj)) {
+		*classp = defclass;
+		return (ISC_R_SUCCESS);
+	}
+	DE_CONST(cfg_obj_asstring(classobj), r.base);
+	r.length = strlen(r.base);
+	return (dns_rdataclass_fromtext(classp, &r));
+}
 
 /*% load zones from the configuration */
 static isc_result_t
 load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 	const cfg_listelt_t *element;
-	const cfg_obj_t *classobj;
 	const cfg_obj_t *views;
 	const cfg_obj_t *vconfig;
-	const char *vclass;
 	isc_result_t result = ISC_R_SUCCESS;
 	isc_result_t tresult;
 
@@ -385,17 +463,24 @@ load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 	     element != NULL;
 	     element = cfg_list_next(element))
 	{
+		const cfg_obj_t *classobj;
+		dns_rdataclass_t viewclass;
 		const char *vname;
+		char buf[sizeof("CLASS65535")];
 
-		vclass = "IN";
 		vconfig = cfg_listelt_value(element);
-		if (vconfig != NULL) {
-			classobj = cfg_tuple_get(vconfig, "class");
-			if (cfg_obj_isstring(classobj))
-				vclass = cfg_obj_asstring(classobj);
-		}
+		if (vconfig == NULL)
+			continue;
+
+		classobj = cfg_tuple_get(vconfig, "class");
+		CHECK(config_getclass(classobj, dns_rdataclass_in,
+					 &viewclass));
+		if (dns_rdataclass_ismeta(viewclass))
+			CHECK(ISC_R_FAILURE);
+
+		dns_rdataclass_format(viewclass, buf, sizeof(buf));
 		vname = cfg_obj_asstring(cfg_tuple_get(vconfig, "name"));
-		tresult = configure_view(vclass, vname, config, vconfig, mctx);
+		tresult = configure_view(buf, vname, config, vconfig, mctx);
 		if (tresult != ISC_R_SUCCESS)
 			result = tresult;
 	}
@@ -405,6 +490,8 @@ load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 		if (tresult != ISC_R_SUCCESS)
 			result = tresult;
 	}
+
+cleanup:
 	return (result);
 }
 
@@ -430,10 +517,37 @@ main(int argc, char **argv) {
 	isc_entropy_t *ectx = NULL;
 	isc_boolean_t load_zones = ISC_FALSE;
 	isc_boolean_t print = ISC_FALSE;
+	unsigned int flags = 0;
 
 	isc_commandline_errprint = ISC_FALSE;
 
-	while ((c = isc_commandline_parse(argc, argv, "dhjt:pvz")) != EOF) {
+	/*
+	 * Process memory debugging argument first.
+	 */
+#define CMDLINE_FLAGS "dhjm:t:pvxz"
+	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != -1) {
+		switch (c) {
+		case 'm':
+			if (strcasecmp(isc_commandline_argument, "record") == 0)
+				isc_mem_debugging |= ISC_MEM_DEBUGRECORD;
+			if (strcasecmp(isc_commandline_argument, "trace") == 0)
+				isc_mem_debugging |= ISC_MEM_DEBUGTRACE;
+			if (strcasecmp(isc_commandline_argument, "usage") == 0)
+				isc_mem_debugging |= ISC_MEM_DEBUGUSAGE;
+			if (strcasecmp(isc_commandline_argument, "size") == 0)
+				isc_mem_debugging |= ISC_MEM_DEBUGSIZE;
+			if (strcasecmp(isc_commandline_argument, "mctx") == 0)
+				isc_mem_debugging |= ISC_MEM_DEBUGCTX;
+			break;
+		default:
+			break;
+		}
+	}
+	isc_commandline_reset = ISC_TRUE;
+
+	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
+
+	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != EOF) {
 		switch (c) {
 		case 'd':
 			debug++;
@@ -443,6 +557,9 @@ main(int argc, char **argv) {
 			nomerge = ISC_FALSE;
 			break;
 
+		case 'm':
+			break;
+
 		case 't':
 			result = isc_dir_chroot(isc_commandline_argument);
 			if (result != ISC_R_SUCCESS) {
@@ -460,6 +577,10 @@ main(int argc, char **argv) {
 			printf(VERSION "\n");
 			exit(0);
 
+		case 'x':
+			flags |= CFG_PRINTER_XKEY;
+			break;
+
 		case 'z':
 			load_zones = ISC_TRUE;
 			docheckmx = ISC_FALSE;
@@ -471,6 +592,7 @@ main(int argc, char **argv) {
 			if (isc_commandline_option != '?')
 				fprintf(stderr, "%s: invalid argument -%c\n",
 					program, isc_commandline_option);
+			/* FALLTHROUGH */
 		case 'h':
 			usage();
 
@@ -481,6 +603,11 @@ main(int argc, char **argv) {
 		}
 	}
 
+	if (((flags & CFG_PRINTER_XKEY) != 0) && !print) {
+		fprintf(stderr, "%s: -x cannot be used without -p\n", program);
+		exit(1);
+	}
+
 	if (isc_commandline_index + 1 < argc)
 		usage();
 	if (argv[isc_commandline_index] != NULL)
@@ -492,8 +619,6 @@ main(int argc, char **argv) {
 	InitSockets();
 #endif
 
-	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
-
 	RUNTIME_CHECK(setup_logging(mctx, stdout, &logc) == ISC_R_SUCCESS);
 
 	RUNTIME_CHECK(isc_entropy_create(mctx, &ectx) == ISC_R_SUCCESS);
@@ -521,7 +646,7 @@ main(int argc, char **argv) {
 	}
 
 	if (print && exit_status == 0)
-		cfg_print(config, output, NULL);
+		cfg_printx(config, flags, output, NULL);
 	cfg_obj_destroy(parser, &config);
 
 	cfg_parser_destroy(&parser);

bin/check/named-checkconf.docbook

@@ -1,27 +1,21 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
-	       [<!ENTITY mdash "&#8212;">]>
+<!DOCTYPE book [
+<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) 2004, 2005, 2007, 2009  Internet Systems Consortium, Inc. ("ISC")
- - Copyright (C) 2000-2002  Internet Software Consortium.
+ - Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
  -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
 
-<!-- $Id: named-checkconf.docbook,v 1.22 2009/12/28 23:21:16 each Exp $ -->
-<refentry id="man.named-checkconf">
+<!-- Converted by db4-upgrade version 1.0 -->
+<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkconf">
+  <info>
+    <date>2014-01-10</date>
+  </info>
   <refentryinfo>
-    <date>June 14, 2000</date>
+    <corpname>ISC</corpname>
+    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
   </refentryinfo>
 
   <refmeta>
@@ -32,18 +26,18 @@
 
   <docinfo>
     <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
       <year>2004</year>
       <year>2005</year>
       <year>2007</year>
       <year>2009</year>
+      <year>2014</year>
+      <year>2015</year>
+      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
-    <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
-      <holder>Internet Software Consortium.</holder>
-    </copyright>
   </docinfo>
 
   <refnamediv>
@@ -52,20 +46,19 @@
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis>
+    <cmdsynopsis sepchar=" ">
       <command>named-checkconf</command>
-      <arg><option>-h</option></arg>
-      <arg><option>-v</option></arg>
-      <arg><option>-j</option></arg>
-      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="req">filename</arg>
-      <arg><option>-p</option></arg>
-      <arg><option>-z</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-hjvz</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-p</option>
+	<arg choice="opt" rep="norepeat"><option>-x</option>
+      </arg></arg>
+      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="req" rep="norepeat">filename</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsect1>
-    <title>DESCRIPTION</title>
+  <refsection><info><title>DESCRIPTION</title></info>
+
     <para><command>named-checkconf</command>
       checks the syntax, but not the semantics, of a
       <command>named</command> configuration file.  The file is parsed
@@ -83,10 +76,9 @@
       successful.  <command>named-checkconf</command> can be run
       on these files explicitly, however.
     </para>
-  </refsect1>
+  </refsection>
 
-  <refsect1>
-    <title>OPTIONS</title>
+  <refsection><info><title>OPTIONS</title></info>
 
     <variablelist>
       <varlistentry>
@@ -98,13 +90,33 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term>-j</term>
+        <listitem>
+          <para>
+            When loading a zonefile read the journal if it exists.
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>-p</term>
+        <listitem>
+          <para>
+	    Print out the <filename>named.conf</filename> and included files
+	    in canonical form if no errors were detected.
+            See also the <option>-x</option> option.
+          </para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term>-t <replaceable class="parameter">directory</replaceable></term>
         <listitem>
           <para>
             Chroot to <filename>directory</filename> so that include
             directives in the configuration file are processed as if
-            run by a similarly chrooted named.
+            run by a similarly chrooted <command>named</command>.
           </para>
         </listitem>
       </varlistentry>
@@ -120,11 +132,16 @@
       </varlistentry>
 
       <varlistentry>
-        <term>-p</term>
+        <term>-x</term>
         <listitem>
           <para>
-	    Print out the <filename>named.conf</filename> and included files
-	    in canonical form if no errors were detected.
+	    When printing the configuration files in canonical
+            form, obscure shared secrets by replacing them with
+            strings of question marks ('?'). This allows the
+            contents of <filename>named.conf</filename> and related
+            files to be shared &mdash; for example, when submitting
+            bug reports &mdash; without compromising private data.
+            This option cannot be used without <option>-p</option>.
           </para>
         </listitem>
       </varlistentry>
@@ -139,15 +156,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term>-j</term>
-        <listitem>
-          <para>
-            When loading a zonefile read the journal if it exists.
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>filename</term>
         <listitem>
@@ -160,18 +168,18 @@
 
     </variablelist>
 
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>RETURN VALUES</title></info>
 
-  <refsect1>
-    <title>RETURN VALUES</title>
     <para><command>named-checkconf</command>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </para>
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>SEE ALSO</title></info>
 
-  <refsect1>
-    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
@@ -180,16 +188,5 @@
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsect1>
-
-  <refsect1>
-    <title>AUTHOR</title>
-    <para><corpauthor>Internet Systems Consortium</corpauthor>
-    </para>
-  </refsect1>
-
-</refentry><!--
- - Local variables:
- - mode: sgml
- - End:
--->
+  </refsection>
+</refentry>

bin/check/named-checkconf.html

@@ -1,113 +1,158 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
- - Copyright (C) 2000-2002 Internet Software Consortium.
+ - Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
  - 
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
-<!-- $Id: named-checkconf.html,v 1.33 2009/12/29 01:14:03 tbox Exp $ -->
-<html>
+<html lang="en">
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>named-checkconf</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
 <a name="man.named-checkconf"></a><div class="titlepage"></div>
-<div class="refnamediv">
+  
+  
+
+  
+
+  
+
+  <div class="refnamediv">
 <h2>Name</h2>
-<p><span class="application">named-checkconf</span> &#8212; named configuration file syntax checking tool</p>
+<p>
+    <span class="application">named-checkconf</span>
+     &#8212; named configuration file syntax checking tool
+  </p>
 </div>
-<div class="refsynopsisdiv">
+
+  <div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-<div class="cmdsynopsis"><p><code class="command">named-checkconf</code>  [<code class="option">-h</code>] [<code class="option">-v</code>] [<code class="option">-j</code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] {filename} [<code class="option">-p</code>] [<code class="option">-z</code>]</p></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543395"></a><h2>DESCRIPTION</h2>
-<p><span><strong class="command">named-checkconf</strong></span>
+    <div class="cmdsynopsis"><p>
+      <code class="command">named-checkconf</code> 
+       [<code class="option">-hjvz</code>]
+       [<code class="option">-p</code>
+	 [<code class="option">-x</code>
+      ]]
+       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
+       {filename}
+    </p></div>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.7"></a><h2>DESCRIPTION</h2>
+
+    <p><span class="command"><strong>named-checkconf</strong></span>
       checks the syntax, but not the semantics, of a
-      <span><strong class="command">named</strong></span> configuration file.  The file is parsed
+      <span class="command"><strong>named</strong></span> configuration file.  The file is parsed
       and checked for syntax errors, along with all files included by it.
       If no file is specified, <code class="filename">/etc/named.conf</code> is read
       by default.
     </p>
-<p>
-      Note: files that <span><strong class="command">named</strong></span> reads in separate
+    <p>
+      Note: files that <span class="command"><strong>named</strong></span> reads in separate
       parser contexts, such as <code class="filename">rndc.key</code> and
       <code class="filename">bind.keys</code>, are not automatically read
-      by <span><strong class="command">named-checkconf</strong></span>.  Configuration
-      errors in these files may cause <span><strong class="command">named</strong></span> to
-      fail to run, even if <span><strong class="command">named-checkconf</strong></span> was
-      successful.  <span><strong class="command">named-checkconf</strong></span> can be run
+      by <span class="command"><strong>named-checkconf</strong></span>.  Configuration
+      errors in these files may cause <span class="command"><strong>named</strong></span> to
+      fail to run, even if <span class="command"><strong>named-checkconf</strong></span> was
+      successful.  <span class="command"><strong>named-checkconf</strong></span> can be run
       on these files explicitly, however.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543444"></a><h2>OPTIONS</h2>
-<div class="variablelist"><dl>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.8"></a><h2>OPTIONS</h2>
+
+    <div class="variablelist"><dl class="variablelist">
 <dt><span class="term">-h</span></dt>
-<dd><p>
+<dd>
+          <p>
             Print the usage summary and exit.
-          </p></dd>
-<dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd><p>
-            Chroot to <code class="filename">directory</code> so that include
-            directives in the configuration file are processed as if
-            run by a similarly chrooted named.
-          </p></dd>
-<dt><span class="term">-v</span></dt>
-<dd><p>
-            Print the version of the <span><strong class="command">named-checkconf</strong></span>
-            program and exit.
-          </p></dd>
+          </p>
+        </dd>
+<dt><span class="term">-j</span></dt>
+<dd>
+          <p>
+            When loading a zonefile read the journal if it exists.
+          </p>
+        </dd>
 <dt><span class="term">-p</span></dt>
-<dd><p>
+<dd>
+          <p>
 	    Print out the <code class="filename">named.conf</code> and included files
 	    in canonical form if no errors were detected.
-          </p></dd>
+            See also the <code class="option">-x</code> option.
+          </p>
+        </dd>
+<dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
+<dd>
+          <p>
+            Chroot to <code class="filename">directory</code> so that include
+            directives in the configuration file are processed as if
+            run by a similarly chrooted <span class="command"><strong>named</strong></span>.
+          </p>
+        </dd>
+<dt><span class="term">-v</span></dt>
+<dd>
+          <p>
+            Print the version of the <span class="command"><strong>named-checkconf</strong></span>
+            program and exit.
+          </p>
+        </dd>
+<dt><span class="term">-x</span></dt>
+<dd>
+          <p>
+	    When printing the configuration files in canonical
+            form, obscure shared secrets by replacing them with
+            strings of question marks ('?'). This allows the
+            contents of <code class="filename">named.conf</code> and related
+            files to be shared &#8212; for example, when submitting
+            bug reports &#8212; without compromising private data.
+            This option cannot be used without <code class="option">-p</code>.
+          </p>
+        </dd>
 <dt><span class="term">-z</span></dt>
-<dd><p>
+<dd>
+          <p>
 	    Perform a test load of all master zones found in
 	    <code class="filename">named.conf</code>.
-          </p></dd>
-<dt><span class="term">-j</span></dt>
-<dd><p>
-            When loading a zonefile read the journal if it exists.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">filename</span></dt>
-<dd><p>
+<dd>
+          <p>
             The name of the configuration file to be checked.  If not
             specified, it defaults to <code class="filename">/etc/named.conf</code>.
-          </p></dd>
+          </p>
+        </dd>
 </dl></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543568"></a><h2>RETURN VALUES</h2>
-<p><span><strong class="command">named-checkconf</strong></span>
+
+  </div>
+
+  <div class="refsection">
+<a name="id-1.9"></a><h2>RETURN VALUES</h2>
+
+    <p><span class="command"><strong>named-checkconf</strong></span>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543579"></a><h2>SEE ALSO</h2>
-<p><span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
-      <span class="citerefentry"><span class="refentrytitle">named-checkzone</span>(8)</span>,
+  </div>
+
+  <div class="refsection">
+<a name="id-1.10"></a><h2>SEE ALSO</h2>
+
+    <p><span class="citerefentry">
+        <span class="refentrytitle">named</span>(8)
+      </span>,
+      <span class="citerefentry">
+        <span class="refentrytitle">named-checkzone</span>(8)
+      </span>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543609"></a><h2>AUTHOR</h2>
-<p><span class="corpauthor">Internet Systems Consortium</span>
-    </p>
-</div>
+  </div>
 </div></body>
 </html>

bin/check/named-checkzone.8

@@ -1,118 +1,130 @@
-.\" Copyright (C) 2004-2007, 2009-2011 Internet Systems Consortium, Inc. ("ISC")
-.\" Copyright (C) 2000-2002 Internet Software Consortium.
+.\" Copyright (C) 2000-2002, 2004-2007, 2009-2016 Internet Systems Consortium, Inc. ("ISC")
 .\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
-.\" purpose with or without fee is hereby granted, provided that the above
-.\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
-.\"
-.\" $Id: named-checkzone.8,v 1.49 2011/12/22 18:10:10 tbox Exp $
+.\" This Source Code Form is subject to the terms of the Mozilla Public
+.\" License, v. 2.0. If a copy of the MPL was not distributed with this
+.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
 .\"
 .hy 0
 .ad l
-.\"     Title: named\-checkzone
+'\" t
+.\"     Title: named-checkzone
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
-.\"      Date: June 13, 2000
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\"      Date: 2014-02-19
 .\"    Manual: BIND9
-.\"    Source: BIND9
+.\"    Source: ISC
+.\"  Language: English
 .\"
-.TH "NAMED\-CHECKZONE" "8" "June 13, 2000" "BIND9" "BIND9"
+.TH "NAMED\-CHECKZONE" "8" "2014\-02\-19" "ISC" "BIND9"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
 .SH "NAME"
-named\-checkzone, named\-compilezone \- zone file validity checking or converting tool
+named-checkzone, named-compilezone \- zone file validity checking or converting tool
 .SH "SYNOPSIS"
-.HP 16
-\fBnamed\-checkzone\fR [\fB\-d\fR] [\fB\-h\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-M\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-o\ \fR\fB\fIfilename\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-S\ \fR\fB\fImode\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {zonename} {filename}
-.HP 18
-\fBnamed\-compilezone\fR [\fB\-d\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-C\ \fR\fB\fImode\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {\fB\-o\ \fR\fB\fIfilename\fR\fR} {zonename} {filename}
+.HP \w'\fBnamed\-checkzone\fR\ 'u
+\fBnamed\-checkzone\fR [\fB\-d\fR] [\fB\-h\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-J\ \fR\fB\fIfilename\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-M\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-l\ \fR\fB\fIttl\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-o\ \fR\fB\fIfilename\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-S\ \fR\fB\fImode\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {zonename} {filename}
+.HP \w'\fBnamed\-compilezone\fR\ 'u
+\fBnamed\-compilezone\fR [\fB\-d\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-C\ \fR\fB\fImode\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-J\ \fR\fB\fIfilename\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-l\ \fR\fB\fIttl\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {\fB\-o\ \fR\fB\fIfilename\fR\fR} {zonename} {filename}
 .SH "DESCRIPTION"
 .PP
 \fBnamed\-checkzone\fR
-checks the syntax and integrity of a zone file. It performs the same checks as
+checks the syntax and integrity of a zone file\&. It performs the same checks as
 \fBnamed\fR
-does when loading a zone. This makes
+does when loading a zone\&. This makes
 \fBnamed\-checkzone\fR
-useful for checking zone files before configuring them into a name server.
+useful for checking zone files before configuring them into a name server\&.
 .PP
 \fBnamed\-compilezone\fR
 is similar to
-\fBnamed\-checkzone\fR, but it always dumps the zone contents to a specified file in a specified format. Additionally, it applies stricter check levels by default, since the dump output will be used as an actual zone file loaded by
-\fBnamed\fR. When manually specified otherwise, the check levels must at least be as strict as those specified in the
+\fBnamed\-checkzone\fR, but it always dumps the zone contents to a specified file in a specified format\&. Additionally, it applies stricter check levels by default, since the dump output will be used as an actual zone file loaded by
+\fBnamed\fR\&. When manually specified otherwise, the check levels must at least be as strict as those specified in the
 \fBnamed\fR
-configuration file.
+configuration file\&.
 .SH "OPTIONS"
 .PP
 \-d
 .RS 4
-Enable debugging.
+Enable debugging\&.
 .RE
 .PP
 \-h
 .RS 4
-Print the usage summary and exit.
+Print the usage summary and exit\&.
 .RE
 .PP
 \-q
 .RS 4
-Quiet mode \- exit code only.
+Quiet mode \- exit code only\&.
 .RE
 .PP
 \-v
 .RS 4
 Print the version of the
 \fBnamed\-checkzone\fR
-program and exit.
+program and exit\&.
 .RE
 .PP
 \-j
 .RS 4
-When loading the zone file read the journal if it exists.
+When loading a zone file, read the journal if it exists\&. The journal file name is assumed to be the zone file name appended with the string
+\&.jnl\&.
+.RE
+.PP
+\-J \fIfilename\fR
+.RS 4
+When loading the zone file read the journal from the given file, if it exists\&. (Implies \-j\&.)
 .RE
 .PP
 \-c \fIclass\fR
 .RS 4
-Specify the class of the zone. If not specified, "IN" is assumed.
+Specify the class of the zone\&. If not specified, "IN" is assumed\&.
 .RE
 .PP
 \-i \fImode\fR
 .RS 4
-Perform post\-load zone integrity checks. Possible modes are
+Perform post\-load zone integrity checks\&. Possible modes are
 \fB"full"\fR
 (default),
 \fB"full\-sibling"\fR,
 \fB"local"\fR,
 \fB"local\-sibling"\fR
 and
-\fB"none"\fR.
+\fB"none"\fR\&.
 .sp
 Mode
 \fB"full"\fR
-checks that MX records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). Mode
+checks that MX records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
 \fB"local"\fR
-only checks MX records which refer to in\-zone hostnames.
+only checks MX records which refer to in\-zone hostnames\&.
 .sp
 Mode
 \fB"full"\fR
-checks that SRV records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). Mode
+checks that SRV records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
 \fB"local"\fR
-only checks SRV records which refer to in\-zone hostnames.
+only checks SRV records which refer to in\-zone hostnames\&.
 .sp
 Mode
 \fB"full"\fR
-checks that delegation NS records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). It also checks that glue address records in the zone match those advertised by the child. Mode
+checks that delegation NS records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. It also checks that glue address records in the zone match those advertised by the child\&. Mode
 \fB"local"\fR
-only checks NS records which refer to in\-zone hostnames or that some required glue exists, that is when the nameserver is in a child zone.
+only checks NS records which refer to in\-zone hostnames or that some required glue exists, that is when the nameserver is in a child zone\&.
 .sp
 Mode
 \fB"full\-sibling"\fR
@@ -122,179 +134,196 @@ disable sibling glue checks but are otherwise the same as
 \fB"full"\fR
 and
 \fB"local"\fR
-respectively.
+respectively\&.
 .sp
 Mode
 \fB"none"\fR
-disables the checks.
+disables the checks\&.
 .RE
 .PP
 \-f \fIformat\fR
 .RS 4
-Specify the format of the zone file. Possible formats are
+Specify the format of the zone file\&. Possible formats are
 \fB"text"\fR
-(default) and
-\fB"raw"\fR.
+(default),
+\fB"raw"\fR, and
+\fB"map"\fR\&.
 .RE
 .PP
 \-F \fIformat\fR
 .RS 4
-Specify the format of the output file specified. For
-\fBnamed\-checkzone\fR, this does not cause any effects unless it dumps the zone contents.
+Specify the format of the output file specified\&. For
+\fBnamed\-checkzone\fR, this does not cause any effects unless it dumps the zone contents\&.
 .sp
 Possible formats are
 \fB"text"\fR
-(default) and
-\fB"raw"\fR
-or
+(default), which is the standard textual representation of the zone, and
+\fB"map"\fR,
+\fB"raw"\fR, and
 \fB"raw=N"\fR, which store the zone in a binary format for rapid loading by
-\fBnamed\fR.
+\fBnamed\fR\&.
 \fB"raw=N"\fR
 specifies the format version of the raw zone file: if N is 0, the raw file can be read by any version of
-\fBnamed\fR; if N is 1, the file can be read by release 9.9.0 or higher. The default is 1.
+\fBnamed\fR; if N is 1, the file can be read by release 9\&.9\&.0 or higher; the default is 1\&.
 .RE
 .PP
 \-k \fImode\fR
 .RS 4
 Perform
 \fB"check\-names"\fR
-checks with the specified failure mode. Possible modes are
+checks with the specified failure mode\&. Possible modes are
 \fB"fail"\fR
 (default for
 \fBnamed\-compilezone\fR),
 \fB"warn"\fR
 (default for
 \fBnamed\-checkzone\fR) and
-\fB"ignore"\fR.
+\fB"ignore"\fR\&.
+.RE
+.PP
+\-l \fIttl\fR
+.RS 4
+Sets a maximum permissible TTL for the input file\&. Any record with a TTL higher than this value will cause the zone to be rejected\&. This is similar to using the
+\fBmax\-zone\-ttl\fR
+option in
+named\&.conf\&.
 .RE
 .PP
 \-L \fIserial\fR
 .RS 4
-When compiling a zone to 'raw' format, set the "source serial" value in the header to the specified serial number. (This is expected to be used primarily for testing purposes.)
+When compiling a zone to "raw" or "map" format, set the "source serial" value in the header to the specified serial number\&. (This is expected to be used primarily for testing purposes\&.)
 .RE
 .PP
 \-m \fImode\fR
 .RS 4
-Specify whether MX records should be checked to see if they are addresses. Possible modes are
+Specify whether MX records should be checked to see if they are addresses\&. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR.
+\fB"ignore"\fR\&.
 .RE
 .PP
 \-M \fImode\fR
 .RS 4
-Check if a MX record refers to a CNAME. Possible modes are
+Check if a MX record refers to a CNAME\&. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR.
+\fB"ignore"\fR\&.
 .RE
 .PP
 \-n \fImode\fR
 .RS 4
-Specify whether NS records should be checked to see if they are addresses. Possible modes are
+Specify whether NS records should be checked to see if they are addresses\&. Possible modes are
 \fB"fail"\fR
 (default for
 \fBnamed\-compilezone\fR),
 \fB"warn"\fR
 (default for
 \fBnamed\-checkzone\fR) and
-\fB"ignore"\fR.
+\fB"ignore"\fR\&.
 .RE
 .PP
 \-o \fIfilename\fR
 .RS 4
 Write zone output to
-\fIfilename\fR. If
-\fIfilename\fR
+filename\&. If
+filename
 is
-\fI\-\fR
-then write to standard out. This is mandatory for
-\fBnamed\-compilezone\fR.
+\-
+then write to standard out\&. This is mandatory for
+\fBnamed\-compilezone\fR\&.
 .RE
 .PP
 \-r \fImode\fR
 .RS 4
-Check for records that are treated as different by DNSSEC but are semantically equal in plain DNS. Possible modes are
+Check for records that are treated as different by DNSSEC but are semantically equal in plain DNS\&. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR.
+\fB"ignore"\fR\&.
 .RE
 .PP
 \-s \fIstyle\fR
 .RS 4
-Specify the style of the dumped zone file. Possible styles are
+Specify the style of the dumped zone file\&. Possible styles are
 \fB"full"\fR
 (default) and
-\fB"relative"\fR. The full format is most suitable for processing automatically by a separate script. On the other hand, the relative format is more human\-readable and is thus suitable for editing by hand. For
+\fB"relative"\fR\&. The full format is most suitable for processing automatically by a separate script\&. On the other hand, the relative format is more human\-readable and is thus suitable for editing by hand\&. For
 \fBnamed\-checkzone\fR
-this does not cause any effects unless it dumps the zone contents. It also does not have any meaning if the output format is not text.
+this does not cause any effects unless it dumps the zone contents\&. It also does not have any meaning if the output format is not text\&.
 .RE
 .PP
 \-S \fImode\fR
 .RS 4
-Check if a SRV record refers to a CNAME. Possible modes are
+Check if a SRV record refers to a CNAME\&. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR.
+\fB"ignore"\fR\&.
 .RE
 .PP
 \-t \fIdirectory\fR
 .RS 4
 Chroot to
-\fIdirectory\fR
-so that include directives in the configuration file are processed as if run by a similarly chrooted named.
+directory
+so that include directives in the configuration file are processed as if run by a similarly chrooted
+\fBnamed\fR\&.
+.RE
+.PP
+\-T \fImode\fR
+.RS 4
+Check if Sender Policy Framework (SPF) records exist and issues a warning if an SPF\-formatted TXT record is not also present\&. Possible modes are
+\fB"warn"\fR
+(default),
+\fB"ignore"\fR\&.
 .RE
 .PP
 \-w \fIdirectory\fR
 .RS 4
 chdir to
-\fIdirectory\fR
-so that relative filenames in master file $INCLUDE directives work. This is similar to the directory clause in
-\fInamed.conf\fR.
+directory
+so that relative filenames in master file $INCLUDE directives work\&. This is similar to the directory clause in
+named\&.conf\&.
 .RE
 .PP
 \-D
 .RS 4
-Dump zone file in canonical format. This is always enabled for
-\fBnamed\-compilezone\fR.
+Dump zone file in canonical format\&. This is always enabled for
+\fBnamed\-compilezone\fR\&.
 .RE
 .PP
 \-W \fImode\fR
 .RS 4
-Specify whether to check for non\-terminal wildcards. Non\-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (RFC 1034). Possible modes are
+Specify whether to check for non\-terminal wildcards\&. Non\-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (RFC 1034)\&. Possible modes are
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR.
+\fB"ignore"\fR\&.
 .RE
 .PP
 zonename
 .RS 4
-The domain name of the zone being checked.
+The domain name of the zone being checked\&.
 .RE
 .PP
 filename
 .RS 4
-The name of the zone file.
+The name of the zone file\&.
 .RE
 .SH "RETURN VALUES"
 .PP
 \fBnamed\-checkzone\fR
-returns an exit status of 1 if errors were detected and 0 otherwise.
+returns an exit status of 1 if errors were detected and 0 otherwise\&.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed\-checkconf\fR(8),
+\fBnamed-checkconf\fR(8),
 RFC 1035,
-BIND 9 Administrator Reference Manual.
+BIND 9 Administrator Reference Manual\&.
 .SH "AUTHOR"
 .PP
-Internet Systems Consortium
+\fBInternet Systems Consortium, Inc\&.\fR
 .SH "COPYRIGHT"
-Copyright \(co 2004\-2007, 2009\-2011 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2000\-2002 Internet Software Consortium.
+Copyright \(co 2000-2002, 2004-2007, 2009-2016 Internet Systems Consortium, Inc. ("ISC")
 .br

bin/check/named-checkzone.c

@@ -1,21 +1,12 @@
 /*
- * Copyright (C) 2004-2011  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 1999-2003  Internet Software Consortium.
+ * Copyright (C) 1999-2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
-/* $Id: named-checkzone.c,v 1.65 2011/12/22 17:29:22 each Exp $ */
+/* $Id: named-checkzone.c,v 1.65.32.2 2012/02/07 02:45:21 each Exp $ */
 
 /*! \file */
 
@@ -30,6 +21,7 @@
 #include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
+#include <isc/print.h>
 #include <isc/socket.h>
 #include <isc/string.h>
 #include <isc/task.h>
@@ -57,7 +49,7 @@ dns_zone_t *zone = NULL;
 dns_zonetype_t zonetype = dns_zone_master;
 static int dumpzone = 0;
 static const char *output_filename;
-static char *prog_name = NULL;
+static const char *prog_name = NULL;
 static const dns_master_style_t *outputstyle = NULL;
 static enum { progmode_check, progmode_compile } progmode;
 
@@ -78,7 +70,7 @@ static void
 usage(void) {
 	fprintf(stderr,
 		"usage: %s [-djqvD] [-c class] "
-		"[-f inputformat] [-F outputformat] "
+		"[-f inputformat] [-F outputformat] [-J filename] "
 		"[-t directory] [-w directory] [-k (ignore|warn|fail)] "
 		"[-n (ignore|warn|fail)] [-m (ignore|warn|fail)] "
 		"[-r (ignore|warn|fail)] "
@@ -115,11 +107,17 @@ main(int argc, char **argv) {
 	dns_masterformat_t outputformat = dns_masterformat_text;
 	dns_masterrawheader_t header;
 	isc_uint32_t rawversion = 1, serialnum = 0;
+	dns_ttl_t maxttl = 0;
 	isc_boolean_t snset = ISC_FALSE;
 	isc_boolean_t logdump = ISC_FALSE;
 	FILE *errout = stdout;
 	char *endp;
 
+	/*
+	 * Uncomment the following line if memory debugging is needed:
+	 * isc_mem_debugging |= ISC_MEM_DEBUGRECORD;
+	 */
+
 	outputstyle = &dns_master_style_full;
 
 	prog_name = strrchr(argv[0], '/');
@@ -150,19 +148,21 @@ main(int argc, char **argv) {
 	if (progmode == progmode_compile) {
 		zone_options |= (DNS_ZONEOPT_CHECKNS |
 				 DNS_ZONEOPT_FATALNS |
+				 DNS_ZONEOPT_CHECKSPF |
 				 DNS_ZONEOPT_CHECKDUPRR |
 				 DNS_ZONEOPT_CHECKNAMES |
 				 DNS_ZONEOPT_CHECKNAMESFAIL |
 				 DNS_ZONEOPT_CHECKWILDCARD);
 	} else
-		zone_options |= DNS_ZONEOPT_CHECKDUPRR;
+		zone_options |= (DNS_ZONEOPT_CHECKDUPRR |
+				 DNS_ZONEOPT_CHECKSPF);
 
 #define ARGCMP(X) (strcmp(isc_commandline_argument, X) == 0)
 
 	isc_commandline_errprint = ISC_FALSE;
 
 	while ((c = isc_commandline_parse(argc, argv,
-			       "c:df:hi:jk:L:m:n:qr:s:t:o:vw:DF:M:S:W:"))
+			       "c:df:hi:jJ:k:L:l:m:n:qr:s:t:o:vw:DF:M:S:T:W:"))
 	       != EOF) {
 		switch (c) {
 		case 'c':
@@ -223,6 +223,11 @@ main(int argc, char **argv) {
 			nomerge = ISC_FALSE;
 			break;
 
+		case 'J':
+			journal = isc_commandline_argument;
+			nomerge = ISC_FALSE;
+			break;
+
 		case 'k':
 			if (ARGCMP("warn")) {
 				zone_options |= DNS_ZONEOPT_CHECKNAMES;
@@ -251,6 +256,18 @@ main(int argc, char **argv) {
 			}
 			break;
 
+		case 'l':
+			zone_options2 |= DNS_ZONEOPT2_CHECKTTL;
+			endp = NULL;
+			maxttl = strtol(isc_commandline_argument, &endp, 0);
+			if (*endp != '\0') {
+				fprintf(stderr, "maximum TTL "
+						"must be numeric");
+				exit(1);
+			}
+			break;
+
+
 		case 'n':
 			if (ARGCMP("ignore")) {
 				zone_options &= ~(DNS_ZONEOPT_CHECKNS|
@@ -379,6 +396,18 @@ main(int argc, char **argv) {
 			}
 			break;
 
+		case 'T':
+			if (ARGCMP("warn")) {
+				zone_options |= DNS_ZONEOPT_CHECKSPF;
+			} else if (ARGCMP("ignore")) {
+				zone_options &= ~DNS_ZONEOPT_CHECKSPF;
+			} else {
+				fprintf(stderr, "invalid argument to -T: %s\n",
+					isc_commandline_argument);
+				exit(1);
+			}
+			break;
+
 		case 'W':
 			if (ARGCMP("warn"))
 				zone_options |= DNS_ZONEOPT_CHECKWILDCARD;
@@ -390,6 +419,7 @@ main(int argc, char **argv) {
 			if (isc_commandline_option != '?')
 				fprintf(stderr, "%s: invalid argument -%c\n",
 					prog_name, isc_commandline_option);
+			/* FALLTHROUGH */
 		case 'h':
 			usage();
 
@@ -418,6 +448,8 @@ main(int argc, char **argv) {
 			inputformat = dns_masterformat_raw;
 			fprintf(stderr,
 				"WARNING: input format raw, version ignored\n");
+		} else if (strcasecmp(inputformatstr, "map") == 0) {
+			inputformat = dns_masterformat_map;
 		} else {
 			fprintf(stderr, "unknown file format: %s\n",
 			    inputformatstr);
@@ -441,6 +473,8 @@ main(int argc, char **argv) {
 					"unknown raw format version\n");
 				exit(1);
 			}
+		} else if (strcasecmp(outputformatstr, "map") == 0) {
+			outputformat = dns_masterformat_map;
 		} else {
 			fprintf(stderr, "unknown file format: %s\n",
 				outputformatstr);
@@ -494,7 +528,7 @@ main(int argc, char **argv) {
 	origin = argv[isc_commandline_index++];
 	filename = argv[isc_commandline_index++];
 	result = load_zone(mctx, origin, filename, inputformat, classname,
-			   &zone);
+			   maxttl, &zone);
 
 	if (snset) {
 		dns_master_initrawheader(&header);

bin/check/named-checkzone.docbook

@@ -1,27 +1,19 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
-	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) 2004-2007, 2009-2011  Internet Systems Consortium, Inc. ("ISC")
- - Copyright (C) 2000-2002  Internet Software Consortium.
+ - Copyright (C) 2000-2002, 2004-2007, 2009-2016  Internet Systems Consortium, Inc. ("ISC")
  -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
 
-<!-- $Id: named-checkzone.docbook,v 1.44 2011/12/22 07:32:39 each Exp $ -->
-<refentry id="man.named-checkzone">
+<!-- Converted by db4-upgrade version 1.0 -->
+<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkzone">
+  <info>
+    <date>2014-02-19</date>
+  </info>
   <refentryinfo>
-    <date>June 13, 2000</date>
+    <corpname>ISC</corpname>
+    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
   </refentryinfo>
 
   <refmeta>
@@ -32,6 +24,9 @@
 
   <docinfo>
     <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
       <year>2004</year>
       <year>2005</year>
       <year>2006</year>
@@ -39,14 +34,13 @@
       <year>2009</year>
       <year>2010</year>
       <year>2011</year>
+      <year>2012</year>
+      <year>2013</year>
+      <year>2014</year>
+      <year>2015</year>
+      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
-    <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
-      <holder>Internet Software Consortium.</holder>
-    </copyright>
   </docinfo>
 
   <refnamediv>
@@ -56,62 +50,68 @@
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis>
+    <cmdsynopsis sepchar=" ">
       <command>named-checkzone</command>
-      <arg><option>-d</option></arg>
-      <arg><option>-h</option></arg>
-      <arg><option>-j</option></arg>
-      <arg><option>-q</option></arg>
-      <arg><option>-v</option></arg>
-      <arg><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-M <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg><option>-S <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg><option>-D</option></arg>
-      <arg><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req">zonename</arg>
-      <arg choice="req">filename</arg>
+      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-J <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-M <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-l <replaceable class="parameter">ttl</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-S <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="req" rep="norepeat">zonename</arg>
+      <arg choice="req" rep="norepeat">filename</arg>
     </cmdsynopsis>
-    <cmdsynopsis>
+    <cmdsynopsis sepchar=" ">
       <command>named-compilezone</command>
-      <arg><option>-d</option></arg>
-      <arg><option>-j</option></arg>
-      <arg><option>-q</option></arg>
-      <arg><option>-v</option></arg>
-      <arg><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg><option>-C <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg><option>-D</option></arg>
-      <arg><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="req">zonename</arg>
-      <arg choice="req">filename</arg>
+      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-C <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-J <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-l <replaceable class="parameter">ttl</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="req" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg choice="req" rep="norepeat">zonename</arg>
+      <arg choice="req" rep="norepeat">filename</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsect1>
-    <title>DESCRIPTION</title>
+  <refsection><info><title>DESCRIPTION</title></info>
+
     <para><command>named-checkzone</command>
       checks the syntax and integrity of a zone file.  It performs the
       same checks as <command>named</command> does when loading a
@@ -129,10 +129,10 @@
         least be as strict as those specified in the
 	<command>named</command> configuration file.
      </para>
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>OPTIONS</title></info>
 
-  <refsect1>
-    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -176,7 +176,19 @@
         <term>-j</term>
         <listitem>
           <para>
-            When loading the zone file read the journal if it exists.
+            When loading a zone file, read the journal if it exists.
+            The journal file name is assumed to be the zone file name
+	    appended with the string <filename>.jnl</filename>.
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>-J <replaceable class="parameter">filename</replaceable></term>
+        <listitem>
+          <para>
+            When loading the zone file read the journal from the given
+            file, if it exists. (Implies -j.)
           </para>
         </listitem>
       </varlistentry>
@@ -239,8 +251,8 @@
 	<listitem>
 	  <para>
 	    Specify the format of the zone file.
-	    Possible formats are <command>"text"</command> (default)
-	    and <command>"raw"</command>.
+	    Possible formats are <command>"text"</command> (default),
+	    <command>"raw"</command>, and <command>"map"</command>.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -255,14 +267,15 @@
 	    contents.
 	  </para>
 	  <para>
-	    Possible formats are <command>"text"</command> (default)
-	    and <command>"raw"</command> or <command>"raw=N"</command>,
-            which store the zone in a binary format for rapid loading
-            by <command>named</command>.  <command>"raw=N"</command>
-            specifies the format version of the raw zone file: if N
-            is 0, the raw file can be read by any version of
-            <command>named</command>; if N is 1, the file can be read
-            by release 9.9.0 or higher.  The default is 1.
+	    Possible formats are <command>"text"</command> (default),
+	    which is the standard textual representation of the zone,
+	    and <command>"map"</command>, <command>"raw"</command>,
+            and <command>"raw=N"</command>, which store the zone in a
+            binary format for rapid loading by <command>named</command>.
+            <command>"raw=N"</command> specifies the format version of
+            the raw zone file: if N is 0, the raw file can be read by
+            any version of <command>named</command>; if N is 1, the file
+            can be read by release 9.9.0 or higher; the default is 1.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -282,13 +295,27 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term>-l <replaceable class="parameter">ttl</replaceable></term>
+        <listitem>
+          <para>
+            Sets a maximum permissible TTL for the input file.
+            Any record with a TTL higher than this value will cause
+            the zone to be rejected.  This is similar to using the
+            <command>max-zone-ttl</command> option in
+            <filename>named.conf</filename>.
+          </para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term>-L <replaceable class="parameter">serial</replaceable></term>
         <listitem>
           <para>
-            When compiling a zone to 'raw' format, set the "source serial" 
-            value in the header to the specified serial number.  (This is
-            expected to be used primarily for testing purposes.)
+            When compiling a zone to "raw" or "map" format, set the
+            "source serial" value in the header to the specified serial
+            number.  (This is expected to be used primarily for testing
+            purposes.)
           </para>
         </listitem>
       </varlistentry>
@@ -349,7 +376,7 @@
         <listitem>
 	  <para>
             Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.  
+	    are semantically equal in plain DNS.
             Possible modes are <command>"fail"</command>,
             <command>"warn"</command> (default) and
             <command>"ignore"</command>.
@@ -396,11 +423,23 @@
             Chroot to <filename>directory</filename> so that
             include
             directives in the configuration file are processed as if
-            run by a similarly chrooted named.
+            run by a similarly chrooted <command>named</command>.
           </para>
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+	<term>-T <replaceable class="parameter">mode</replaceable></term>
+	<listitem>
+	  <para>
+	    Check if Sender Policy Framework (SPF) records exist
+	    and issues a warning if an SPF-formatted TXT record is
+	    not also present.  Possible modes are <command>"warn"</command>
+	    (default), <command>"ignore"</command>.
+	  </para>
+	</listitem>
+      </varlistentry>
+
       <varlistentry>
         <term>-w <replaceable class="parameter">directory</replaceable></term>
         <listitem>
@@ -458,37 +497,27 @@
 
     </variablelist>
 
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>RETURN VALUES</title></info>
 
-  <refsect1>
-    <title>RETURN VALUES</title>
     <para><command>named-checkzone</command>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </para>
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>SEE ALSO</title></info>
 
-  <refsect1>
-    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
       <citerefentry>
-        <refentrytitle>named-checkconf</refentrytitle><manvolnum>8</manvolnum>  
+        <refentrytitle>named-checkconf</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
       <citetitle>RFC 1035</citetitle>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsect1>
+  </refsection>
 
-  <refsect1>
-    <title>AUTHOR</title>
-    <para><corpauthor>Internet Systems Consortium</corpauthor>
-    </para>
-  </refsect1>
-
-</refentry><!--
- - Local variables:
- - mode: sgml
- - End:
--->
+</refentry>

bin/check/named-checkzone.html

@@ -1,286 +1,429 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2004-2007, 2009-2011 Internet Systems Consortium, Inc. ("ISC")
- - Copyright (C) 2000-2002 Internet Software Consortium.
+ - Copyright (C) 2000-2002, 2004-2007, 2009-2016 Internet Systems Consortium, Inc. ("ISC")
  - 
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
-<!-- $Id: named-checkzone.html,v 1.49 2011/12/22 18:10:10 tbox Exp $ -->
-<html>
+<html lang="en">
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>named-checkzone</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
 <a name="man.named-checkzone"></a><div class="titlepage"></div>
-<div class="refnamediv">
+  
+  
+
+  
+
+  
+
+  <div class="refnamediv">
 <h2>Name</h2>
-<p><span class="application">named-checkzone</span>, <span class="application">named-compilezone</span> &#8212; zone file validity checking or converting tool</p>
+<p>
+    <span class="application">named-checkzone</span>, 
+    <span class="application">named-compilezone</span>
+     &#8212; zone file validity checking or converting tool
+  </p>
 </div>
-<div class="refsynopsisdiv">
+
+  <div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-<div class="cmdsynopsis"><p><code class="command">named-checkzone</code>  [<code class="option">-d</code>] [<code class="option">-h</code>] [<code class="option">-j</code>] [<code class="option">-q</code>] [<code class="option">-v</code>] [<code class="option">-c <em class="replaceable"><code>class</code></em></code>] [<code class="option">-f <em class="replaceable"><code>format</code></em></code>] [<code class="option">-F <em class="replaceable"><code>format</code></em></code>] [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-M <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>] [<code class="option">-o <em class="replaceable"><code>filename</code></em></code>] [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-s <em class="replaceable"><code>style</code></em></code>] [<code class="option">-S <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-D</code>] [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>] {zonename} {filename}</p></div>
-<div class="cmdsynopsis"><p><code class="command">named-compilezone</code>  [<code class="option">-d</code>] [<code class="option">-j</code>] [<code class="option">-q</code>] [<code class="option">-v</code>] [<code class="option">-c <em class="replaceable"><code>class</code></em></code>] [<code class="option">-C <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-f <em class="replaceable"><code>format</code></em></code>] [<code class="option">-F <em class="replaceable"><code>format</code></em></code>] [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>] [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-s <em class="replaceable"><code>style</code></em></code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-D</code>] [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>] {<code class="option">-o <em class="replaceable"><code>filename</code></em></code>} {zonename} {filename}</p></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543715"></a><h2>DESCRIPTION</h2>
-<p><span><strong class="command">named-checkzone</strong></span>
+    <div class="cmdsynopsis"><p>
+      <code class="command">named-checkzone</code> 
+       [<code class="option">-d</code>]
+       [<code class="option">-h</code>]
+       [<code class="option">-j</code>]
+       [<code class="option">-q</code>]
+       [<code class="option">-v</code>]
+       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
+       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
+       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
+       [<code class="option">-J <em class="replaceable"><code>filename</code></em></code>]
+       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-M <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-l <em class="replaceable"><code>ttl</code></em></code>]
+       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
+       [<code class="option">-o <em class="replaceable"><code>filename</code></em></code>]
+       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
+       [<code class="option">-S <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
+       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
+       [<code class="option">-D</code>]
+       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
+       {zonename}
+       {filename}
+    </p></div>
+    <div class="cmdsynopsis"><p>
+      <code class="command">named-compilezone</code> 
+       [<code class="option">-d</code>]
+       [<code class="option">-j</code>]
+       [<code class="option">-q</code>]
+       [<code class="option">-v</code>]
+       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
+       [<code class="option">-C <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
+       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
+       [<code class="option">-J <em class="replaceable"><code>filename</code></em></code>]
+       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-l <em class="replaceable"><code>ttl</code></em></code>]
+       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
+       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
+       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
+       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
+       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
+       [<code class="option">-D</code>]
+       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
+       {<code class="option">-o <em class="replaceable"><code>filename</code></em></code>}
+       {zonename}
+       {filename}
+    </p></div>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.7"></a><h2>DESCRIPTION</h2>
+
+    <p><span class="command"><strong>named-checkzone</strong></span>
       checks the syntax and integrity of a zone file.  It performs the
-      same checks as <span><strong class="command">named</strong></span> does when loading a
-      zone.  This makes <span><strong class="command">named-checkzone</strong></span> useful for
+      same checks as <span class="command"><strong>named</strong></span> does when loading a
+      zone.  This makes <span class="command"><strong>named-checkzone</strong></span> useful for
       checking zone files before configuring them into a name server.
     </p>
-<p>
-        <span><strong class="command">named-compilezone</strong></span> is similar to
-	<span><strong class="command">named-checkzone</strong></span>, but it always dumps the
+    <p>
+        <span class="command"><strong>named-compilezone</strong></span> is similar to
+	<span class="command"><strong>named-checkzone</strong></span>, but it always dumps the
         zone contents to a specified file in a specified format.
 	Additionally, it applies stricter check levels by default,
         since the dump output will be used as an actual zone file
-	loaded by <span><strong class="command">named</strong></span>.
+	loaded by <span class="command"><strong>named</strong></span>.
 	When manually specified otherwise, the check levels must at
         least be as strict as those specified in the
-	<span><strong class="command">named</strong></span> configuration file.
+	<span class="command"><strong>named</strong></span> configuration file.
      </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543750"></a><h2>OPTIONS</h2>
-<div class="variablelist"><dl>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.8"></a><h2>OPTIONS</h2>
+
+
+    <div class="variablelist"><dl class="variablelist">
 <dt><span class="term">-d</span></dt>
-<dd><p>
+<dd>
+          <p>
             Enable debugging.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-h</span></dt>
-<dd><p>
+<dd>
+          <p>
             Print the usage summary and exit.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-q</span></dt>
-<dd><p>
+<dd>
+          <p>
             Quiet mode - exit code only.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-v</span></dt>
-<dd><p>
-            Print the version of the <span><strong class="command">named-checkzone</strong></span>
+<dd>
+          <p>
+            Print the version of the <span class="command"><strong>named-checkzone</strong></span>
             program and exit.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-j</span></dt>
-<dd><p>
-            When loading the zone file read the journal if it exists.
-          </p></dd>
+<dd>
+          <p>
+            When loading a zone file, read the journal if it exists.
+            The journal file name is assumed to be the zone file name
+	    appended with the string <code class="filename">.jnl</code>.
+          </p>
+        </dd>
+<dt><span class="term">-J <em class="replaceable"><code>filename</code></em></span></dt>
+<dd>
+          <p>
+            When loading the zone file read the journal from the given
+            file, if it exists. (Implies -j.)
+          </p>
+        </dd>
 <dt><span class="term">-c <em class="replaceable"><code>class</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Specify the class of the zone.  If not specified, "IN" is assumed.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-i <em class="replaceable"><code>mode</code></em></span></dt>
 <dd>
-<p>
+	  <p>
 	      Perform post-load zone integrity checks.  Possible modes are
-	      <span><strong class="command">"full"</strong></span> (default),
-	      <span><strong class="command">"full-sibling"</strong></span>,
-	      <span><strong class="command">"local"</strong></span>,
-	      <span><strong class="command">"local-sibling"</strong></span> and
-	      <span><strong class="command">"none"</strong></span>.
+	      <span class="command"><strong>"full"</strong></span> (default),
+	      <span class="command"><strong>"full-sibling"</strong></span>,
+	      <span class="command"><strong>"local"</strong></span>,
+	      <span class="command"><strong>"local-sibling"</strong></span> and
+	      <span class="command"><strong>"none"</strong></span>.
 	  </p>
-<p>
-	      Mode <span><strong class="command">"full"</strong></span> checks that MX records
+	  <p>
+	      Mode <span class="command"><strong>"full"</strong></span> checks that MX records
 	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span><strong class="command">"local"</strong></span> only
+	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
 	      checks MX records which refer to in-zone hostnames.
 	  </p>
-<p>
-	      Mode <span><strong class="command">"full"</strong></span> checks that SRV records
+	  <p>
+	      Mode <span class="command"><strong>"full"</strong></span> checks that SRV records
 	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span><strong class="command">"local"</strong></span> only
+	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
 	      checks SRV records which refer to in-zone hostnames.
 	  </p>
-<p>
-	      Mode <span><strong class="command">"full"</strong></span> checks that delegation NS
+	  <p>
+	      Mode <span class="command"><strong>"full"</strong></span> checks that delegation NS
 	      records refer to A or AAAA record (both in-zone and out-of-zone
 	      hostnames).  It also checks that glue address records
 	      in the zone match those advertised by the child.
-	      Mode <span><strong class="command">"local"</strong></span> only checks NS records which
+	      Mode <span class="command"><strong>"local"</strong></span> only checks NS records which
 	      refer to in-zone hostnames or that some required glue exists,
 	      that is when the nameserver is in a child zone.
 	  </p>
-<p>
-	      Mode <span><strong class="command">"full-sibling"</strong></span> and
-	      <span><strong class="command">"local-sibling"</strong></span> disable sibling glue
-	      checks but are otherwise the same as <span><strong class="command">"full"</strong></span>
-	      and <span><strong class="command">"local"</strong></span> respectively.
+	  <p>
+	      Mode <span class="command"><strong>"full-sibling"</strong></span> and
+	      <span class="command"><strong>"local-sibling"</strong></span> disable sibling glue
+	      checks but are otherwise the same as <span class="command"><strong>"full"</strong></span>
+	      and <span class="command"><strong>"local"</strong></span> respectively.
 	  </p>
-<p>
-	      Mode <span><strong class="command">"none"</strong></span> disables the checks.
+	  <p>
+	      Mode <span class="command"><strong>"none"</strong></span> disables the checks.
 	  </p>
-</dd>
+	</dd>
 <dt><span class="term">-f <em class="replaceable"><code>format</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
 	    Specify the format of the zone file.
-	    Possible formats are <span><strong class="command">"text"</strong></span> (default)
-	    and <span><strong class="command">"raw"</strong></span>.
-	  </p></dd>
+	    Possible formats are <span class="command"><strong>"text"</strong></span> (default),
+	    <span class="command"><strong>"raw"</strong></span>, and <span class="command"><strong>"map"</strong></span>.
+	  </p>
+	</dd>
 <dt><span class="term">-F <em class="replaceable"><code>format</code></em></span></dt>
 <dd>
-<p>
+	  <p>
 	    Specify the format of the output file specified.
-	    For <span><strong class="command">named-checkzone</strong></span>,
+	    For <span class="command"><strong>named-checkzone</strong></span>,
 	    this does not cause any effects unless it dumps the zone
 	    contents.
 	  </p>
-<p>
-	    Possible formats are <span><strong class="command">"text"</strong></span> (default)
-	    and <span><strong class="command">"raw"</strong></span> or <span><strong class="command">"raw=N"</strong></span>,
-            which store the zone in a binary format for rapid loading
-            by <span><strong class="command">named</strong></span>.  <span><strong class="command">"raw=N"</strong></span>
-            specifies the format version of the raw zone file: if N
-            is 0, the raw file can be read by any version of
-            <span><strong class="command">named</strong></span>; if N is 1, the file can be read
-            by release 9.9.0 or higher.  The default is 1.
+	  <p>
+	    Possible formats are <span class="command"><strong>"text"</strong></span> (default),
+	    which is the standard textual representation of the zone,
+	    and <span class="command"><strong>"map"</strong></span>, <span class="command"><strong>"raw"</strong></span>,
+            and <span class="command"><strong>"raw=N"</strong></span>, which store the zone in a
+            binary format for rapid loading by <span class="command"><strong>named</strong></span>.
+            <span class="command"><strong>"raw=N"</strong></span> specifies the format version of
+            the raw zone file: if N is 0, the raw file can be read by
+            any version of <span class="command"><strong>named</strong></span>; if N is 1, the file
+            can be read by release 9.9.0 or higher; the default is 1.
 	  </p>
-</dd>
+	</dd>
 <dt><span class="term">-k <em class="replaceable"><code>mode</code></em></span></dt>
-<dd><p>
-            Perform <span><strong class="command">"check-names"</strong></span> checks with the
+<dd>
+          <p>
+            Perform <span class="command"><strong>"check-names"</strong></span> checks with the
 	    specified failure mode.
-            Possible modes are <span><strong class="command">"fail"</strong></span>
-	    (default for <span><strong class="command">named-compilezone</strong></span>),
-            <span><strong class="command">"warn"</strong></span>
-	    (default for <span><strong class="command">named-checkzone</strong></span>) and
-            <span><strong class="command">"ignore"</strong></span>.
-          </p></dd>
+            Possible modes are <span class="command"><strong>"fail"</strong></span>
+	    (default for <span class="command"><strong>named-compilezone</strong></span>),
+            <span class="command"><strong>"warn"</strong></span>
+	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
+            <span class="command"><strong>"ignore"</strong></span>.
+          </p>
+        </dd>
+<dt><span class="term">-l <em class="replaceable"><code>ttl</code></em></span></dt>
+<dd>
+          <p>
+            Sets a maximum permissible TTL for the input file.
+            Any record with a TTL higher than this value will cause
+            the zone to be rejected.  This is similar to using the
+            <span class="command"><strong>max-zone-ttl</strong></span> option in
+            <code class="filename">named.conf</code>.
+          </p>
+        </dd>
 <dt><span class="term">-L <em class="replaceable"><code>serial</code></em></span></dt>
-<dd><p>
-            When compiling a zone to 'raw' format, set the "source serial" 
-            value in the header to the specified serial number.  (This is
-            expected to be used primarily for testing purposes.)
-          </p></dd>
+<dd>
+          <p>
+            When compiling a zone to "raw" or "map" format, set the
+            "source serial" value in the header to the specified serial
+            number.  (This is expected to be used primarily for testing
+            purposes.)
+          </p>
+        </dd>
 <dt><span class="term">-m <em class="replaceable"><code>mode</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Specify whether MX records should be checked to see if they
-            are addresses.  Possible modes are <span><strong class="command">"fail"</strong></span>,
-            <span><strong class="command">"warn"</strong></span> (default) and
-            <span><strong class="command">"ignore"</strong></span>.
-          </p></dd>
+            are addresses.  Possible modes are <span class="command"><strong>"fail"</strong></span>,
+            <span class="command"><strong>"warn"</strong></span> (default) and
+            <span class="command"><strong>"ignore"</strong></span>.
+          </p>
+        </dd>
 <dt><span class="term">-M <em class="replaceable"><code>mode</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
 	    Check if a MX record refers to a CNAME.
-            Possible modes are <span><strong class="command">"fail"</strong></span>,
-            <span><strong class="command">"warn"</strong></span> (default) and
-            <span><strong class="command">"ignore"</strong></span>.
-	  </p></dd>
+            Possible modes are <span class="command"><strong>"fail"</strong></span>,
+            <span class="command"><strong>"warn"</strong></span> (default) and
+            <span class="command"><strong>"ignore"</strong></span>.
+	  </p>
+        </dd>
 <dt><span class="term">-n <em class="replaceable"><code>mode</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Specify whether NS records should be checked to see if they
             are addresses.
-	    Possible modes are <span><strong class="command">"fail"</strong></span>
-	    (default for <span><strong class="command">named-compilezone</strong></span>),
-            <span><strong class="command">"warn"</strong></span>
-	    (default for <span><strong class="command">named-checkzone</strong></span>) and
-            <span><strong class="command">"ignore"</strong></span>.
-          </p></dd>
+	    Possible modes are <span class="command"><strong>"fail"</strong></span>
+	    (default for <span class="command"><strong>named-compilezone</strong></span>),
+            <span class="command"><strong>"warn"</strong></span>
+	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
+            <span class="command"><strong>"ignore"</strong></span>.
+          </p>
+        </dd>
 <dt><span class="term">-o <em class="replaceable"><code>filename</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Write zone output to <code class="filename">filename</code>.
 	    If <code class="filename">filename</code> is <code class="filename">-</code> then
 	    write to standard out.
-	    This is mandatory for <span><strong class="command">named-compilezone</strong></span>.
-          </p></dd>
+	    This is mandatory for <span class="command"><strong>named-compilezone</strong></span>.
+          </p>
+        </dd>
 <dt><span class="term">-r <em class="replaceable"><code>mode</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
             Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.  
-            Possible modes are <span><strong class="command">"fail"</strong></span>,
-            <span><strong class="command">"warn"</strong></span> (default) and
-            <span><strong class="command">"ignore"</strong></span>.
-	  </p></dd>
+	    are semantically equal in plain DNS.
+            Possible modes are <span class="command"><strong>"fail"</strong></span>,
+            <span class="command"><strong>"warn"</strong></span> (default) and
+            <span class="command"><strong>"ignore"</strong></span>.
+	  </p>
+        </dd>
 <dt><span class="term">-s <em class="replaceable"><code>style</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
 	    Specify the style of the dumped zone file.
-	    Possible styles are <span><strong class="command">"full"</strong></span> (default)
-	    and <span><strong class="command">"relative"</strong></span>.
+	    Possible styles are <span class="command"><strong>"full"</strong></span> (default)
+	    and <span class="command"><strong>"relative"</strong></span>.
 	    The full format is most suitable for processing
 	    automatically by a separate script.
 	    On the other hand, the relative format is more
 	    human-readable and is thus suitable for editing by hand.
-	    For <span><strong class="command">named-checkzone</strong></span>
+	    For <span class="command"><strong>named-checkzone</strong></span>
 	    this does not cause any effects unless it dumps the zone
 	    contents.
 	    It also does not have any meaning if the output format
 	    is not text.
-	  </p></dd>
+	  </p>
+	</dd>
 <dt><span class="term">-S <em class="replaceable"><code>mode</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
 	    Check if a SRV record refers to a CNAME.
-            Possible modes are <span><strong class="command">"fail"</strong></span>,
-            <span><strong class="command">"warn"</strong></span> (default) and
-            <span><strong class="command">"ignore"</strong></span>.
-	  </p></dd>
+            Possible modes are <span class="command"><strong>"fail"</strong></span>,
+            <span class="command"><strong>"warn"</strong></span> (default) and
+            <span class="command"><strong>"ignore"</strong></span>.
+	  </p>
+        </dd>
 <dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Chroot to <code class="filename">directory</code> so that
             include
             directives in the configuration file are processed as if
-            run by a similarly chrooted named.
-          </p></dd>
+            run by a similarly chrooted <span class="command"><strong>named</strong></span>.
+          </p>
+        </dd>
+<dt><span class="term">-T <em class="replaceable"><code>mode</code></em></span></dt>
+<dd>
+	  <p>
+	    Check if Sender Policy Framework (SPF) records exist
+	    and issues a warning if an SPF-formatted TXT record is
+	    not also present.  Possible modes are <span class="command"><strong>"warn"</strong></span>
+	    (default), <span class="command"><strong>"ignore"</strong></span>.
+	  </p>
+	</dd>
 <dt><span class="term">-w <em class="replaceable"><code>directory</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             chdir to <code class="filename">directory</code> so that
             relative
             filenames in master file $INCLUDE directives work.  This
             is similar to the directory clause in
             <code class="filename">named.conf</code>.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-D</span></dt>
-<dd><p>
+<dd>
+          <p>
             Dump zone file in canonical format.
-	    This is always enabled for <span><strong class="command">named-compilezone</strong></span>.
-          </p></dd>
+	    This is always enabled for <span class="command"><strong>named-compilezone</strong></span>.
+          </p>
+        </dd>
 <dt><span class="term">-W <em class="replaceable"><code>mode</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Specify whether to check for non-terminal wildcards.
             Non-terminal wildcards are almost always the result of a
             failure to understand the wildcard matching algorithm (RFC 1034).
-            Possible modes are <span><strong class="command">"warn"</strong></span> (default)
+            Possible modes are <span class="command"><strong>"warn"</strong></span> (default)
             and
-            <span><strong class="command">"ignore"</strong></span>.
-          </p></dd>
+            <span class="command"><strong>"ignore"</strong></span>.
+          </p>
+        </dd>
 <dt><span class="term">zonename</span></dt>
-<dd><p>
+<dd>
+          <p>
             The domain name of the zone being checked.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">filename</span></dt>
-<dd><p>
+<dd>
+          <p>
             The name of the zone file.
-          </p></dd>
+          </p>
+        </dd>
 </dl></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2544499"></a><h2>RETURN VALUES</h2>
-<p><span><strong class="command">named-checkzone</strong></span>
+
+  </div>
+
+  <div class="refsection">
+<a name="id-1.9"></a><h2>RETURN VALUES</h2>
+
+    <p><span class="command"><strong>named-checkzone</strong></span>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2544579"></a><h2>SEE ALSO</h2>
-<p><span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
-      <span class="citerefentry"><span class="refentrytitle">named-checkconf</span>(8)</span>,
+  </div>
+
+  <div class="refsection">
+<a name="id-1.10"></a><h2>SEE ALSO</h2>
+
+    <p><span class="citerefentry">
+        <span class="refentrytitle">named</span>(8)
+      </span>,
+      <span class="citerefentry">
+        <span class="refentrytitle">named-checkconf</span>(8)
+      </span>,
       <em class="citetitle">RFC 1035</em>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2544612"></a><h2>AUTHOR</h2>
-<p><span class="corpauthor">Internet Systems Consortium</span>
-    </p>
-</div>
+  </div>
+
 </div></body>
 </html>

bin/check/win32/checkconf.dsp.in

@@ -0,0 +1,107 @@
+# Microsoft Developer Studio Project File - Name="checkconf" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
+
+CFG=checkconf - @PLATFORM@ Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "checkconf.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR @COPTY@ /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe"
+
+!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X @COPTY@
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "checkconf - @PLATFORM@ Release"
+# Name "checkconf - @PLATFORM@ Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\named-checkconf.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/checkconf.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "checkconf"=".\checkconf.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/checkconf.mak.in

@@ -0,0 +1,404 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on checkconf.dsp
+!IF "$(CFG)" == ""
+CFG=checkconf - @PLATFORM@ Debug
+!MESSAGE No configuration specified. Defaulting to checkconf - @PLATFORM@ Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "checkconf - @PLATFORM@ Release" && "$(CFG)" != "checkconf - @PLATFORM@ Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+# Begin Custom Macros
+OutDir=.\Release
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
+
+!ELSE 
+
+ALL : "libdns - @PLATFORM@ Release" "libisccfg - @PLATFORM@ Release" "libisc - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libisc - @PLATFORM@ ReleaseCLEAN" "libisccfg - @PLATFORM@ ReleaseCLEAN" "libdns - @PLATFORM@ ReleaseCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\checkconf.bsc"
+	-@erase "..\..\..\Build\Release\named-checkconf.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\checkconf.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib  ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj" \
+	"..\..\..\lib\isc\win32\Release\libisc.lib" \
+	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
+	"..\..\..\lib\dns\win32\Release\libdns.lib"
+
+"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
+
+!ELSE 
+
+ALL : "libdns - @PLATFORM@ Debug" "libisccfg - @PLATFORM@ Debug" "libisc - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libisc - @PLATFORM@ DebugCLEAN" "libisccfg - @PLATFORM@ DebugCLEAN" "libdns - @PLATFORM@ DebugCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkconf.pdb"
+	-@erase "$(OUTDIR)\checkconf.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
+	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib  ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj" \
+	"..\..\..\lib\isc\win32\Debug\libisc.lib" \
+	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
+	"..\..\..\lib\dns\win32\Debug\libdns.lib"
+
+"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("checkconf.dep")
+!INCLUDE "checkconf.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "checkconf.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "checkconf - @PLATFORM@ Release" || "$(CFG)" == "checkconf - @PLATFORM@ Debug"
+SOURCE="..\check-tool.c"
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+SOURCE="..\named-checkconf.c"
+
+"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
+
+"libisc - @PLATFORM@ Release" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - @PLATFORM@ ReleaseCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
+
+"libisc - @PLATFORM@ Debug" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - @PLATFORM@ DebugCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
+
+"libisccfg - @PLATFORM@ Release" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisccfg - @PLATFORM@ ReleaseCLEAN" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
+
+"libisccfg - @PLATFORM@ Debug" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisccfg - @PLATFORM@ DebugCLEAN" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
+
+"libdns - @PLATFORM@ Release" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - @PLATFORM@ ReleaseCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
+
+"libdns - @PLATFORM@ Debug" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - @PLATFORM@ DebugCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/check/win32/checkconf.vcxproj.filters.in

@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="..\check-tool.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\named-checkconf.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

bin/check/win32/checkconf.vcxproj.in

@@ -0,0 +1,113 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|@PLATFORM@">
+      <Configuration>Debug</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|@PLATFORM@">
+      <Configuration>Release</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{03A96113-CB14-43AA-AEB2-48950E3915C5}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>checkconf</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <LinkIncremental>true</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>named-$(ProjectName)</TargetName>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>named-$(ProjectName)</TargetName>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <ClCompile>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>Level3</WarningLevel>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <BrowseInformation>true</BrowseInformation>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <Optimization>MaxSpeed</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+      <StringPooling>true</StringPooling>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>false</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="..\check-tool.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\named-checkconf.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

bin/check/win32/checkconf.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

bin/check/win32/checktool.dsp

@@ -1,113 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checktool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static-Link Library" 0x0104
-
-CFG=checktool - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak" CFG="checktool - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checktool - Win32 Release" (based on "Win32 (x86) Static-Link Library")
-!MESSAGE "checktool - Win32 Debug" (based on "Win32 (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checktool - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /YX /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /YX /FD /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/checktool.lib"
-
-!ELSEIF  "$(CFG)" == "checktool - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR /YX /FD /GZ /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug out:"Debug/checktool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checktool - Win32 Release"
-# Name "checktool - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\check-tool.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/check/win32/checktool.dsp.in

@@ -0,0 +1,113 @@
+# Microsoft Developer Studio Project File - Name="checktool" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
+
+CFG=checktool - @PLATFORM@ Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "checktool.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "checktool.mak" CFG="checktool - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "checktool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
+!MESSAGE "checktool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "checktool - @PLATFORM@ Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
+# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdchecktool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /out:"Release/checktool.lib"
+
+!ELSEIF  "$(CFG)" == "checktool - @PLATFORM@ Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" @CRYPTO@ /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdchecktool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /debug out:"Debug/checktool.lib"
+
+!ENDIF 
+
+# Begin Target
+
+# Name "checktool - @PLATFORM@ Release"
+# Name "checktool - @PLATFORM@ Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# Begin Group "Main Dns Lib"
+
+# PROP Default_Filter "c"
+# Begin Source File
+
+SOURCE=..\check-tool.c
+# End Source File
+# End Group
+# End Target
+# End Project

bin/check/win32/checktool.vcxproj.filters.in

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\check-tool.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

bin/check/win32/checktool.vcxproj.in

@@ -0,0 +1,99 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|@PLATFORM@">
+      <Configuration>Debug</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|@PLATFORM@">
+      <Configuration>Release</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\check-tool.c" />
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{2C1F7096-C5B5-48D4-846F-A7ACA454335D}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>checktool</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <OutDir>.\$(Configuration)\</OutDir>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <IntDir>.\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <OutDir>.\$(Configuration)\</OutDir>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <IntDir>.\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <ClCompile>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>Level3</WarningLevel>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <BrowseInformation>true</BrowseInformation>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Lib>
+      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <Optimization>MaxSpeed</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+      <StringPooling>true</StringPooling>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Lib>
+      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+    </Lib>
+  </ItemDefinitionGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

bin/check/win32/checktool.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

bin/check/win32/checkzone.dsp.in

@@ -0,0 +1,108 @@
+# Microsoft Developer Studio Project File - Name="checkzone" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
+
+CFG=checkzone - @PLATFORM@ Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "checkzone.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" @COPTY@ /FD /c
+# SUBTRACT CPP /Fr
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe"
+
+!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X @COPTY@
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "checkzone - @PLATFORM@ Release"
+# Name "checkzone - @PLATFORM@ Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\named-checkzone.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/checkzone.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "checkzone"=".\checkzone.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/checkzone.mak.in

@@ -0,0 +1,404 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on checkzone.dsp
+!IF "$(CFG)" == ""
+CFG=checkzone - @PLATFORM@ Debug
+!MESSAGE No configuration specified. Defaulting to checkzone - @PLATFORM@ Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "checkzone - @PLATFORM@ Release" && "$(CFG)" != "checkzone - @PLATFORM@ Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Release\named-checkzone.exe"
+
+!ELSE 
+
+ALL : "libisc - @PLATFORM@ Release" "libdns - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkzone.exe"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libdns - @PLATFORM@ ReleaseCLEAN" "libisc - @PLATFORM@ ReleaseCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\named-checkzone.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /Fp"$(INTDIR)\checkzone.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj" \
+	"..\..\..\lib\dns\win32\Release\libdns.lib" \
+	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
+	"..\..\..\lib\isc\win32\Release\libisc.lib"
+
+"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
+
+!ELSE 
+
+ALL : "libisc - @PLATFORM@ Debug" "libdns - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libdns - @PLATFORM@ DebugCLEAN" "libisc - @PLATFORM@ DebugCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\named-checkzone.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkzone.pdb"
+	-@erase "$(OUTDIR)\checkzone.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
+	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkzone.sbr"
+
+"$(OUTDIR)\checkzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj" \
+	"..\..\..\lib\dns\win32\Debug\libdns.lib" \
+	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
+	"..\..\..\lib\isc\win32\Debug\libisc.lib"
+
+"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("checkzone.dep")
+!INCLUDE "checkzone.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "checkzone.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "checkzone - @PLATFORM@ Release" || "$(CFG)" == "checkzone - @PLATFORM@ Debug"
+SOURCE="..\check-tool.c"
+
+!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
+
+
+"$(INTDIR)\check-tool.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE="..\named-checkzone.c"
+
+!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
+
+
+"$(INTDIR)\named-checkzone.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
+
+"libdns - @PLATFORM@ Release" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - @PLATFORM@ ReleaseCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
+
+"libdns - @PLATFORM@ Debug" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - @PLATFORM@ DebugCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
+
+"libisc - @PLATFORM@ Release" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - @PLATFORM@ ReleaseCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
+
+"libisc - @PLATFORM@ Debug" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - @PLATFORM@ DebugCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/check/win32/checkzone.vcxproj.filters.in

@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="..\check-tool.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\named-checkzone.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

bin/check/win32/checkzone.vcxproj.in

@@ -0,0 +1,124 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|@PLATFORM@">
+      <Configuration>Debug</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|@PLATFORM@">
+      <Configuration>Release</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{66028555-7DD5-4016-B601-9EF9A1EE8BFA}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>checkzone</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <LinkIncremental>true</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>named-$(ProjectName)</TargetName>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>named-$(ProjectName)</TargetName>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <ClCompile>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>Level3</WarningLevel>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <BrowseInformation>true</BrowseInformation>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+    <PostBuildEvent>
+      <Command>cd ..\..\..\Build\$(Configuration)
+copy /Y named-checkzone.exe named-compilezone.exe
+copy /Y named-checkzone.ilk named-compilezone.ilk
+</Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <Optimization>MaxSpeed</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+      <StringPooling>true</StringPooling>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>false</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
+    </Link>
+    <PostBuildEvent>
+      <Command>cd ..\..\..\Build\$(Configuration)
+copy /Y named-checkzone.exe named-compilezone.exe
+</Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="..\check-tool.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\named-checkzone.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

bin/check/win32/checkzone.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

bin/check/win32/namedcheckconf.dsp

@@ -1,107 +0,0 @@
-# Microsoft Developer Studio Project File - Name="namedcheckconf" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=namedcheckconf - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "namedcheckconf.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR /YX /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkconf.exe"
-
-!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "namedcheckconf - Win32 Release"
-# Name "namedcheckconf - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkconf.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/namedcheckconf.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "namedcheckconf"=".\namedcheckconf.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/namedcheckconf.mak

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckconf.dsp
-!IF "$(CFG)" == ""
-CFG=namedcheckconf - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to namedcheckconf - Win32 Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "namedcheckconf - Win32 Release" && "$(CFG)" != "namedcheckconf - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - Win32 Release" "libisccfg - Win32 Release" "libisc - Win32 Release" "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - Win32 ReleaseCLEAN" "libisccfg - Win32 ReleaseCLEAN" "libdns - Win32 ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(OUTDIR)\namedcheckconf.bsc"
-	-@erase "..\..\..\Build\Release\named-checkconf.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\namedcheckconf.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib  ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" /machine:I386 /out:"../../../Build/Release/named-checkconf.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib"
-
-"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - Win32 Debug" "libisccfg - Win32 Debug" "libisc - Win32 Debug" "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - Win32 DebugCLEAN" "libisccfg - Win32 DebugCLEAN" "libdns - Win32 DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkconf.pdb"
-	-@erase "$(OUTDIR)\namedcheckconf.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
-	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib  ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib"
-
-"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("namedcheckconf.dep")
-!INCLUDE "namedcheckconf.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "namedcheckconf.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "namedcheckconf - Win32 Release" || "$(CFG)" == "namedcheckconf - Win32 Debug"
-SOURCE="..\check-tool.c"
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE="..\named-checkconf.c"
-
-"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
-
-"libisc - Win32 Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - Win32 ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
-
-"libisc - Win32 Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - Win32 DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
-
-"libisccfg - Win32 Release" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - Win32 ReleaseCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
-
-"libisccfg - Win32 Debug" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - Win32 DebugCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
-
-"libdns - Win32 Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - Win32 ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
-
-"libdns - Win32 Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - Win32 DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/check/win32/namedcheckzone.dsp

@@ -1,108 +0,0 @@
-# Microsoft Developer Studio Project File - Name="namedcheckzone" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=namedcheckzone - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "namedcheckzone.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /YX /FD /c
-# SUBTRACT CPP /Fr
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkzone.exe"
-
-!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "namedcheckzone - Win32 Release"
-# Name "namedcheckzone - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkzone.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/namedcheckzone.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "namedcheckzone"=".\namedcheckzone.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/namedcheckzone.mak

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckzone.dsp
-!IF "$(CFG)" == ""
-CFG=namedcheckzone - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to namedcheckzone - Win32 Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "namedcheckzone - Win32 Release" && "$(CFG)" != "namedcheckzone - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkzone.exe"
-
-!ELSE 
-
-ALL : "libisc - Win32 Release" "libdns - Win32 Release" "..\..\..\Build\Release\named-checkzone.exe"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - Win32 ReleaseCLEAN" "libisc - Win32 ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\named-checkzone.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /Fp"$(INTDIR)\namedcheckzone.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" /machine:I386 /out:"../../../Build/Release/named-checkzone.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib"
-
-"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
-
-!ELSE 
-
-ALL : "libisc - Win32 Debug" "libdns - Win32 Debug" "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - Win32 DebugCLEAN" "libisc - Win32 DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\named-checkzone.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkzone.pdb"
-	-@erase "$(OUTDIR)\namedcheckzone.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
-	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkzone.sbr"
-
-"$(OUTDIR)\namedcheckzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib"
-
-"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("namedcheckzone.dep")
-!INCLUDE "namedcheckzone.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "namedcheckzone.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "namedcheckzone - Win32 Release" || "$(CFG)" == "namedcheckzone - Win32 Debug"
-SOURCE="..\check-tool.c"
-
-!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
-
-
-"$(INTDIR)\check-tool.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
-
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE="..\named-checkzone.c"
-
-!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
-
-
-"$(INTDIR)\named-checkzone.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
-
-
-"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
-
-"libdns - Win32 Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - Win32 ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
-
-"libdns - Win32 Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - Win32 DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
-
-"libisc - Win32 Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - Win32 ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
-
-"libisc - Win32 Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - Win32 DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/.cvsignore

@@ -1,3 +0,0 @@
-Makefile
-ddns-confgen
-rndc-confgen

bin/confgen/.gitignore

@@ -0,0 +1,3 @@
+ddns-confgen
+rndc-confgen
+tsig-keygen

bin/confgen/Makefile.in

@@ -1,16 +1,8 @@
-# Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2009, 2012, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
 #
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
 
 # $Id: Makefile.in,v 1.8 2009/12/05 23:31:40 each Exp $
 
@@ -18,7 +10,7 @@ srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-@BIND9_VERSION@
+VERSION=@BIND9_VERSION@
 
 @BIND9_MAKE_INCLUDES@
 
@@ -54,7 +46,7 @@ SRCS=		rndc-confgen.c ddns-confgen.c
 
 SUBDIRS =	unix
 
-TARGETS =	rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@
+TARGETS =	rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@
 
 MANPAGES =	rndc-confgen.8 ddns-confgen.8
 
@@ -74,14 +66,19 @@ rndc-confgen.@O@: rndc-confgen.c
 ddns-confgen.@O@: ddns-confgen.c
 	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} -c ${srcdir}/ddns-confgen.c
 
-rndc-confgen@EXEEXT@: rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS} 
+rndc-confgen@EXEEXT@: rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS}
 	export BASEOBJS="rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
 	${FINALBUILDCMD}
 
-ddns-confgen@EXEEXT@: ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS} 
+ddns-confgen@EXEEXT@: ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS}
 	export BASEOBJS="ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
 	${FINALBUILDCMD}
 
+# make a link in the build directory to assist with testing
+tsig-keygen@EXEEXT@: ddns-confgen@EXEEXT@
+	rm -f tsig-keygen@EXEEXT@
+	${LINK_PROGRAM} ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@
+
 doc man:: ${MANOBJS}
 
 docclean manclean maintainer-clean::
@@ -96,6 +93,16 @@ install:: rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@ installdirs
 	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} ddns-confgen@EXEEXT@ ${DESTDIR}${sbindir}
 	${INSTALL_DATA} ${srcdir}/rndc-confgen.8 ${DESTDIR}${mandir}/man8
 	${INSTALL_DATA} ${srcdir}/ddns-confgen.8 ${DESTDIR}${mandir}/man8
+	(cd ${DESTDIR}${sbindir}; rm -f tsig-keygen@EXEEXT@; ${LINK_PROGRAM} ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@)
+	(cd ${DESTDIR}${mandir}/man8; rm -f tsig-keygen.8; ${LINK_PROGRAM} ddns-confgen.8 tsig-keygen.8)
+
+uninstall::
+	rm -f ${DESTDIR}${mandir}/man8/tsig-keygen.8
+	rm -f ${DESTDIR}${sbindir}/tsig-keygen@EXEEXT@
+	rm -f ${DESTDIR}${mandir}/man8/ddns-confgen.8
+	rm -f ${DESTDIR}${mandir}/man8/rndc-confgen.8
+	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/ddns-confgen@EXEEXT@
+	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/rndc-confgen@EXEEXT@
 
 clean distclean maintainer-clean::
 	rm -f ${TARGETS}

bin/confgen/ddns-confgen.8

@@ -1,84 +1,95 @@
-.\" Copyright (C) 2009 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
 .\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
-.\" purpose with or without fee is hereby granted, provided that the above
-.\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
-.\"
-.\" $Id: ddns-confgen.8,v 1.10 2009/09/19 01:14:52 tbox Exp $
+.\" This Source Code Form is subject to the terms of the Mozilla Public
+.\" License, v. 2.0. If a copy of the MPL was not distributed with this
+.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
 .\"
 .hy 0
 .ad l
-.\"     Title: ddns\-confgen
+'\" t
+.\"     Title: ddns-confgen
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
-.\"      Date: Jan 29, 2009
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\"      Date: 2014-03-06
 .\"    Manual: BIND9
-.\"    Source: BIND9
+.\"    Source: ISC
+.\"  Language: English
 .\"
-.TH "DDNS\-CONFGEN" "8" "Jan 29, 2009" "BIND9" "BIND9"
+.TH "DDNS\-CONFGEN" "8" "2014\-03\-06" "ISC" "BIND9"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
 .SH "NAME"
-ddns\-confgen \- ddns key generation tool
+ddns-confgen \- ddns key generation tool
 .SH "SYNOPSIS"
-.HP 13
-\fBddns\-confgen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\-s\ \fIname\fR | \-z\ \fIzone\fR] [\fB\-q\fR] [name]
+.HP \w'\fBtsig\-keygen\fR\ 'u
+\fBtsig\-keygen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [name]
+.HP \w'\fBddns\-confgen\fR\ 'u
+\fBddns\-confgen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-q\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\-s\ \fIname\fR | \-z\ \fIzone\fR]
 .SH "DESCRIPTION"
 .PP
+\fBtsig\-keygen\fR
+and
 \fBddns\-confgen\fR
-generates a key for use by
-\fBnsupdate\fR
-and
-\fBnamed\fR. It simplifies configuration of dynamic zones by generating a key and providing the
-\fBnsupdate\fR
-and
-\fBnamed.conf\fR
-syntax that will be needed to use it, including an example
-\fBupdate\-policy\fR
-statement.
+are invocation methods for a utility that generates keys for use in TSIG signing\&. The resulting keys can be used, for example, to secure dynamic DNS updates to a zone or for the
+\fBrndc\fR
+command channel\&.
 .PP
-If a domain name is specified on the command line, it will be used in the name of the generated key and in the sample
-\fBnamed.conf\fR
-syntax. For example,
-\fBddns\-confgen example.com\fR
-would generate a key called "ddns\-key.example.com", and sample
-\fBnamed.conf\fR
-command that could be used in the zone definition for "example.com".
+When run as
+\fBtsig\-keygen\fR, a domain name can be specified on the command line which will be used as the name of the generated key\&. If no name is specified, the default is
+\fBtsig\-key\fR\&.
+.PP
+When run as
+\fBddns\-confgen\fR, the generated key is accompanied by configuration text and instructions that can be used with
+\fBnsupdate\fR
+and
+\fBnamed\fR
+when setting up dynamic DNS, including an example
+\fBupdate\-policy\fR
+statement\&. (This usage similar to the
+\fBrndc\-confgen\fR
+command for setting up command channel security\&.)
 .PP
 Note that
 \fBnamed\fR
 itself can configure a local DDNS key for use with
-\fBnsupdate \-l\fR.
+\fBnsupdate \-l\fR: it does this when a zone is configured with
+\fBupdate\-policy local;\fR\&.
 \fBddns\-confgen\fR
 is only needed when a more elaborate configuration is required: for instance, if
 \fBnsupdate\fR
-is to be used from a remote system.
+is to be used from a remote system\&.
 .SH "OPTIONS"
 .PP
 \-a \fIalgorithm\fR
 .RS 4
-Specifies the algorithm to use for the TSIG key. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512. The default is hmac\-sha256.
+Specifies the algorithm to use for the TSIG key\&. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512\&. The default is hmac\-sha256\&. Options are case\-insensitive, and the "hmac\-" prefix may be omitted\&.
 .RE
 .PP
 \-h
 .RS 4
-Prints a short summary of the options and arguments to
-\fBddns\-confgen\fR.
+Prints a short summary of options and arguments\&.
 .RE
 .PP
 \-k \fIkeyname\fR
 .RS 4
-Specifies the key name of the DDNS authentication key. The default is
+Specifies the key name of the DDNS authentication key\&. The default is
 \fBddns\-key\fR
 when neither the
 \fB\-s\fR
@@ -86,58 +97,63 @@ nor
 \fB\-z\fR
 option is specified; otherwise, the default is
 \fBddns\-key\fR
-as a separate label followed by the argument of the option, e.g.,
-\fBddns\-key.example.com.\fR
-The key name must have the format of a valid domain name, consisting of letters, digits, hyphens and periods.
+as a separate label followed by the argument of the option, e\&.g\&.,
+\fBddns\-key\&.example\&.com\&.\fR
+The key name must have the format of a valid domain name, consisting of letters, digits, hyphens and periods\&.
 .RE
 .PP
 \-q
 .RS 4
-Quiet mode: Print only the key, with no explanatory text or usage examples.
+(\fBddns\-confgen\fR
+only\&.) Quiet mode: Print only the key, with no explanatory text or usage examples; This is essentially identical to
+\fBtsig\-keygen\fR\&.
 .RE
 .PP
 \-r \fIrandomfile\fR
 .RS 4
-Specifies a source of random data for generating the authorization. If the operating system does not provide a
-\fI/dev/random\fR
-or equivalent device, the default source of randomness is keyboard input.
-\fIrandomdev\fR
-specifies the name of a character device or file containing random data to be used instead of the default. The special value
-\fIkeyboard\fR
-indicates that keyboard input should be used.
+Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
+/dev/random
+or equivalent device, the default source of randomness is keyboard input\&.
+randomdev
+specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
+keyboard
+indicates that keyboard input should be used\&.
 .RE
 .PP
 \-s \fIname\fR
 .RS 4
-Single host mode: The example
-\fBnamed.conf\fR
+(\fBddns\-confgen\fR
+only\&.) Generate configuration example to allow dynamic updates of a single hostname\&. The example
+\fBnamed\&.conf\fR
 text shows how to set an update policy for the specified
 \fIname\fR
-using the "name" nametype. The default key name is ddns\-key.\fIname\fR. Note that the "self" nametype cannot be used, since the name to be updated may differ from the key name. This option cannot be used with the
+using the "name" nametype\&. The default key name is ddns\-key\&.\fIname\fR\&. Note that the "self" nametype cannot be used, since the name to be updated may differ from the key name\&. This option cannot be used with the
 \fB\-z\fR
-option.
+option\&.
 .RE
 .PP
 \-z \fIzone\fR
 .RS 4
-zone mode: The example
-\fBnamed.conf\fR
+(\fBddns\-confgen\fR
+only\&.) Generate configuration example to allow dynamic updates of a zone: The example
+\fBnamed\&.conf\fR
 text shows how to set an update policy for the specified
 \fIzone\fR
 using the "zonesub" nametype, allowing updates to all subdomain names within that
-\fIzone\fR. This option cannot be used with the
+\fIzone\fR\&. This option cannot be used with the
 \fB\-s\fR
-option.
+option\&.
 .RE
 .SH "SEE ALSO"
 .PP
 \fBnsupdate\fR(1),
 \fBnamed.conf\fR(5),
 \fBnamed\fR(8),
-BIND 9 Administrator Reference Manual.
+BIND 9 Administrator Reference Manual\&.
 .SH "AUTHOR"
 .PP
-Internet Systems Consortium
+\fBInternet Systems Consortium, Inc\&.\fR
 .SH "COPYRIGHT"
-Copyright \(co 2009 Internet Systems Consortium, Inc. ("ISC")
+.br
+Copyright \(co 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
 .br

bin/confgen/ddns-confgen.c

@@ -1,21 +1,11 @@
 /*
- * Copyright (C) 2009, 2011  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2011, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
-/* $Id: ddns-confgen.c,v 1.11 2011/03/12 04:59:46 tbox Exp $ */
-
 /*! \file */
 
 /**
@@ -44,8 +34,13 @@
 #include <isc/time.h>
 #include <isc/util.h>
 
+#ifdef PKCS11CRYPTO
+#include <pk11/result.h>
+#endif
+
 #include <dns/keyvalues.h>
 #include <dns/name.h>
+#include <dns/result.h>
 
 #include <dst/dst.h>
 #include <confgen/os.h>
@@ -53,20 +48,21 @@
 #include "util.h"
 #include "keygen.h"
 
-#define DEFAULT_KEYNAME		"ddns-key"
+#define KEYGEN_DEFAULT		"tsig-key"
+#define CONFGEN_DEFAULT		"ddns-key"
 
 static char program[256];
 const char *progname;
-
-isc_boolean_t verbose = ISC_FALSE;
+static enum { progmode_keygen, progmode_confgen} progmode;
+isc_boolean_t verbose = ISC_FALSE; /* needed by util.c but not used here */
 
 ISC_PLATFORM_NORETURN_PRE static void
 usage(int status) ISC_PLATFORM_NORETURN_POST;
 
 static void
 usage(int status) {
-
-	fprintf(stderr, "\
+	if (progmode == progmode_confgen) {
+		fprintf(stderr, "\
 Usage:\n\
  %s [-a alg] [-k keyname] [-r randomfile] [-q] [-s name | -z zone]\n\
   -a alg:        algorithm (default hmac-sha256)\n\
@@ -75,39 +71,70 @@ Usage:\n\
   -s name:       domain name to be updated using the created key\n\
   -z zone:       name of the zone as it will be used in named.conf\n\
   -q:            quiet mode: print the key, with no explanatory text\n",
-		 progname);
+			 progname);
+	} else {
+		fprintf(stderr, "\
+Usage:\n\
+ %s [-a alg] [-r randomfile] [keyname]\n\
+  -a alg:        algorithm (default hmac-sha256)\n\
+  -r randomfile: source of random data (use \"keyboard\" for key timing)\n",
+			 progname);
+	}
 
 	exit (status);
 }
 
 int
 main(int argc, char **argv) {
+	isc_result_t result = ISC_R_SUCCESS;
 	isc_boolean_t show_final_mem = ISC_FALSE;
 	isc_boolean_t quiet = ISC_FALSE;
 	isc_buffer_t key_txtbuffer;
 	char key_txtsecret[256];
 	isc_mem_t *mctx = NULL;
-	isc_result_t result = ISC_R_SUCCESS;
 	const char *randomfile = NULL;
 	const char *keyname = NULL;
 	const char *zone = NULL;
 	const char *self_domain = NULL;
 	char *keybuf = NULL;
 	dns_secalg_t alg = DST_ALG_HMACSHA256;
-	const char *algname = alg_totext(alg);
+	const char *algname;
 	int keysize = 256;
 	int len = 0;
 	int ch;
 
+#ifdef PKCS11CRYPTO
+	pk11_result_register();
+#endif
+	dns_result_register();
+
 	result = isc_file_progname(*argv, program, sizeof(program));
 	if (result != ISC_R_SUCCESS)
-		memcpy(program, "ddns-confgen", 13);
+		memmove(program, "tsig-keygen", 11);
 	progname = program;
 
+	/*
+	 * Libtool doesn't preserve the program name prior to final
+	 * installation.  Remove the libtool prefix ("lt-").
+	 */
+	if (strncmp(progname, "lt-", 3) == 0)
+		progname += 3;
+
+#define PROGCMP(X) \
+	(strcasecmp(progname, X) == 0 || strcasecmp(progname, X ".exe") == 0)
+
+	if (PROGCMP("tsig-keygen")) {
+		progmode = progmode_keygen;
+		quiet = ISC_TRUE;
+	} else if (PROGCMP("ddns-confgen"))
+		progmode = progmode_confgen;
+	else
+		INSIST(0);
+
 	isc_commandline_errprint = ISC_FALSE;
 
 	while ((ch = isc_commandline_parse(argc, argv,
-					   "a:hk:Mmr:qs:Vy:z:")) != -1) {
+					   "a:hk:Mmr:qs:y:z:")) != -1) {
 		switch (ch) {
 		case 'a':
 			algname = isc_commandline_argument;
@@ -120,7 +147,10 @@ main(int argc, char **argv) {
 			usage(0);
 		case 'k':
 		case 'y':
-			keyname = isc_commandline_argument;
+			if (progmode == progmode_confgen)
+				keyname = isc_commandline_argument;
+			else
+				usage(1);
 			break;
 		case 'M':
 			isc_mem_debugging = ISC_MEM_DEBUGTRACE;
@@ -129,19 +159,25 @@ main(int argc, char **argv) {
 			show_final_mem = ISC_TRUE;
 			break;
 		case 'q':
-			quiet = ISC_TRUE;
+			if (progmode == progmode_confgen)
+				quiet = ISC_TRUE;
+			else
+				usage(1);
 			break;
 		case 'r':
 			randomfile = isc_commandline_argument;
 			break;
 		case 's':
-			self_domain = isc_commandline_argument;
-			break;
-		case 'V':
-			verbose = ISC_TRUE;
+			if (progmode == progmode_confgen)
+				self_domain = isc_commandline_argument;
+			else
+				usage(1);
 			break;
 		case 'z':
-			zone = isc_commandline_argument;
+			if (progmode == progmode_confgen)
+				zone = isc_commandline_argument;
+			else
+				usage(1);
 			break;
 		case '?':
 			if (isc_commandline_option != '?') {
@@ -158,22 +194,28 @@ main(int argc, char **argv) {
 		}
 	}
 
-	argc -= isc_commandline_index;
-	argv += isc_commandline_index;
+	if (progmode == progmode_keygen)
+		keyname = argv[isc_commandline_index++];
+
 	POST(argv);
 
 	if (self_domain != NULL && zone != NULL)
 		usage(1);	/* -s and -z cannot coexist */
 
-	if (argc > 0)
+	if (argc > isc_commandline_index)
 		usage(1);
 
+	/* Use canonical algorithm name */
+	algname = alg_totext(alg);
+
 	DO("create memory context", isc_mem_create(0, 0, &mctx));
 
 	if (keyname == NULL) {
 		const char *suffix = NULL;
 
-		keyname = DEFAULT_KEYNAME;
+		keyname = ((progmode == progmode_keygen)
+			?  KEYGEN_DEFAULT
+			: CONFGEN_DEFAULT);
 		if (self_domain != NULL)
 			suffix = self_domain;
 		else if (zone != NULL)

bin/confgen/ddns-confgen.docbook

@@ -1,26 +1,19 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-	       "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
-	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2009, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
  -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
 
-<!-- $Id: ddns-confgen.docbook,v 1.6 2009/09/18 22:08:55 fdupont Exp $ -->
-<refentry id="man.ddns-confgen">
+<!-- Converted by db4-upgrade version 1.0 -->
+<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.ddns-confgen">
+  <info>
+    <date>2014-03-06</date>
+  </info>
   <refentryinfo>
-    <date>Jan 29, 2009</date>
+    <corpname>ISC</corpname>
+    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
   </refentryinfo>
 
   <refmeta>
@@ -37,58 +30,77 @@
   <docinfo>
     <copyright>
       <year>2009</year>
+      <year>2014</year>
+      <year>2015</year>
+      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
   </docinfo>
 
   <refsynopsisdiv>
-    <cmdsynopsis>
+    <cmdsynopsis sepchar=" ">
+      <command>tsig-keygen</command>
+      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat">name</arg>
+    </cmdsynopsis>
+    <cmdsynopsis sepchar=" ">
       <command>ddns-confgen</command>
-      <arg><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg><option>-h</option></arg>
-      <arg><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <group>
-        <arg choice="plain">-s <replaceable class="parameter">name</replaceable></arg>
-        <arg choice="plain">-z <replaceable class="parameter">zone</replaceable></arg>
+      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
+      <group choice="opt" rep="norepeat">
+        <arg choice="plain" rep="norepeat">-s <replaceable class="parameter">name</replaceable></arg>
+        <arg choice="plain" rep="norepeat">-z <replaceable class="parameter">zone</replaceable></arg>
       </group>
-      <arg><option>-q</option></arg>
-      <arg choice="opt">name</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsect1>
-    <title>DESCRIPTION</title>
-    <para><command>ddns-confgen</command>
-      generates a key for use by <command>nsupdate</command>
-      and <command>named</command>.  It simplifies configuration
-      of dynamic zones by generating a key and providing the
-      <command>nsupdate</command> and <command>named.conf</command>
-      syntax that will be needed to use it, including an example
-      <command>update-policy</command> statement.
+  <refsection><info><title>DESCRIPTION</title></info>
+
+    <para>
+      <command>tsig-keygen</command> and <command>ddns-confgen</command>
+      are invocation methods for a utility that generates keys for use
+      in TSIG signing.  The resulting keys can be used, for example,
+      to secure dynamic DNS updates to a zone or for the
+      <command>rndc</command> command channel.
     </para>
 
     <para>
-      If a domain name is specified on the command line, it will
-      be used in the name of the generated key and in the sample
-      <command>named.conf</command> syntax.  For example,
-      <command>ddns-confgen example.com</command> would
-      generate a key called "ddns-key.example.com", and sample
-      <command>named.conf</command> command that could be used
-      in the zone definition for "example.com".
+      When run as <command>tsig-keygen</command>, a domain name
+      can be specified on the command line which will be used as
+      the name of the generated key.  If no name is specified,
+      the default is <constant>tsig-key</constant>.
+    </para>
+
+    <para>
+      When run as <command>ddns-confgen</command>, the generated
+      key is accompanied by configuration text and instructions
+      that can be used with <command>nsupdate</command> and
+      <command>named</command> when setting up dynamic DNS,
+      including an example <command>update-policy</command>
+      statement.  (This usage similar to the
+      <command>rndc-confgen</command> command for setting
+      up command channel security.)
     </para>
 
     <para>
       Note that <command>named</command> itself can configure a
-      local DDNS key for use with <command>nsupdate -l</command>.
-      <command>ddns-confgen</command> is only needed when a 
-      more elaborate configuration is required: for instance, if
-      <command>nsupdate</command> is to be used from a remote system.
+      local DDNS key for use with <command>nsupdate -l</command>:
+      it does this when a zone is configured with
+      <command>update-policy local;</command>.
+      <command>ddns-confgen</command> is only needed when a
+      more elaborate configuration is required: for instance,
+      if <command>nsupdate</command> is to be used from a remote
+      system.
     </para>
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>OPTIONS</title></info>
 
-  <refsect1>
-    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -98,6 +110,8 @@
             Specifies the algorithm to use for the TSIG key.  Available
             choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
             hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
+            Options are case-insensitive, and the "hmac-" prefix
+            may be omitted.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -106,8 +120,7 @@
 	<term>-h</term>
 	<listitem>
 	  <para>
-	    Prints a short summary of the options and arguments to
-	    <command>ddns-confgen</command>.
+	    Prints a short summary of options and arguments.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -133,8 +146,9 @@
 	<term>-q</term>
 	<listitem>
 	  <para>
-	    Quiet mode:  Print only the key, with no explanatory text or
-            usage examples.
+	    (<command>ddns-confgen</command> only.) Quiet mode:  Print
+            only the key, with no explanatory text or usage examples;
+            This is essentially identical to <command>tsig-keygen</command>.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -160,11 +174,12 @@
 	<term>-s <replaceable class="parameter">name</replaceable></term>
 	<listitem>
 	  <para>
-	    Single host mode: The example <command>named.conf</command> text
-	    shows how to set an update policy for the specified
-	    <replaceable class="parameter">name</replaceable>
-	    using the "name" nametype.
-	    The default key name is
+            (<command>ddns-confgen</command> only.)
+	    Generate configuration example to allow dynamic updates
+            of a single hostname.  The example <command>named.conf</command>
+            text shows how to set an update policy for the specified
+            <replaceable class="parameter">name</replaceable>
+	    using the "name" nametype.  The default key name is
 	    ddns-key.<replaceable class="parameter">name</replaceable>.
 	    Note that the "self" nametype cannot be used, since
 	    the name to be updated may differ from the key name.
@@ -177,21 +192,23 @@
 	<term>-z <replaceable class="parameter">zone</replaceable></term>
 	<listitem>
 	  <para>
-	    zone mode:  The example <command>named.conf</command> text
+            (<command>ddns-confgen</command> only.)
+	    Generate configuration example to allow dynamic updates
+            of a zone:  The example <command>named.conf</command> text
             shows how to set an update policy for the specified
 	    <replaceable class="parameter">zone</replaceable>
-	    using the "zonesub" nametype, allowing updates to all subdomain
-	    names within
-	    that <replaceable class="parameter">zone</replaceable>.
+	    using the "zonesub" nametype, allowing updates to
+            all subdomain names within that
+            <replaceable class="parameter">zone</replaceable>.
 	    This option cannot be used with the <option>-s</option> option.
 	  </para>
 	</listitem>
       </varlistentry>
     </variablelist>
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>SEE ALSO</title></info>
 
-  <refsect1>
-    <title>SEE ALSO</title>
     <para><citerefentry>
 	<refentrytitle>nsupdate</refentrytitle><manvolnum>1</manvolnum>
       </citerefentry>,
@@ -203,16 +220,6 @@
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsect1>
+  </refsection>
 
-  <refsect1>
-    <title>AUTHOR</title>
-    <para><corpauthor>Internet Systems Consortium</corpauthor>
-    </para>
-  </refsect1>
-
-</refentry><!--
- - Local variables:
- - mode: sgml
- - End:
--->
+</refentry>

bin/confgen/ddns-confgen.html

@@ -1,78 +1,122 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2009 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
  - 
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
-<!-- $Id: ddns-confgen.html,v 1.10 2009/09/19 01:14:52 tbox Exp $ -->
-<html>
+<html lang="en">
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>ddns-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
 <a name="man.ddns-confgen"></a><div class="titlepage"></div>
-<div class="refnamediv">
+  
+  
+
+  
+
+  <div class="refnamediv">
 <h2>Name</h2>
-<p><span class="application">ddns-confgen</span> &#8212; ddns key generation tool</p>
+<p>
+    <span class="application">ddns-confgen</span>
+     &#8212; ddns key generation tool
+  </p>
 </div>
-<div class="refsynopsisdiv">
+
+  
+
+  <div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-<div class="cmdsynopsis"><p><code class="command">ddns-confgen</code>  [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>] [<code class="option">-h</code>] [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>] [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>] [ -s <em class="replaceable"><code>name</code></em>  |   -z <em class="replaceable"><code>zone</code></em> ] [<code class="option">-q</code>] [name]</p></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543395"></a><h2>DESCRIPTION</h2>
-<p><span><strong class="command">ddns-confgen</strong></span>
-      generates a key for use by <span><strong class="command">nsupdate</strong></span>
-      and <span><strong class="command">named</strong></span>.  It simplifies configuration
-      of dynamic zones by generating a key and providing the
-      <span><strong class="command">nsupdate</strong></span> and <span><strong class="command">named.conf</strong></span>
-      syntax that will be needed to use it, including an example
-      <span><strong class="command">update-policy</strong></span> statement.
+    <div class="cmdsynopsis"><p>
+      <code class="command">tsig-keygen</code> 
+       [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>]
+       [<code class="option">-h</code>]
+       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
+       [name]
+    </p></div>
+    <div class="cmdsynopsis"><p>
+      <code class="command">ddns-confgen</code> 
+       [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>]
+       [<code class="option">-h</code>]
+       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
+       [<code class="option">-q</code>]
+       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
+       [
+         -s <em class="replaceable"><code>name</code></em> 
+         |   -z <em class="replaceable"><code>zone</code></em> 
+      ]
+    </p></div>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.7"></a><h2>DESCRIPTION</h2>
+
+    <p>
+      <span class="command"><strong>tsig-keygen</strong></span> and <span class="command"><strong>ddns-confgen</strong></span>
+      are invocation methods for a utility that generates keys for use
+      in TSIG signing.  The resulting keys can be used, for example,
+      to secure dynamic DNS updates to a zone or for the
+      <span class="command"><strong>rndc</strong></span> command channel.
     </p>
-<p>
-      If a domain name is specified on the command line, it will
-      be used in the name of the generated key and in the sample
-      <span><strong class="command">named.conf</strong></span> syntax.  For example,
-      <span><strong class="command">ddns-confgen example.com</strong></span> would
-      generate a key called "ddns-key.example.com", and sample
-      <span><strong class="command">named.conf</strong></span> command that could be used
-      in the zone definition for "example.com".
+
+    <p>
+      When run as <span class="command"><strong>tsig-keygen</strong></span>, a domain name
+      can be specified on the command line which will be used as
+      the name of the generated key.  If no name is specified,
+      the default is <code class="constant">tsig-key</code>.
     </p>
-<p>
-      Note that <span><strong class="command">named</strong></span> itself can configure a
-      local DDNS key for use with <span><strong class="command">nsupdate -l</strong></span>.
-      <span><strong class="command">ddns-confgen</strong></span> is only needed when a 
-      more elaborate configuration is required: for instance, if
-      <span><strong class="command">nsupdate</strong></span> is to be used from a remote system.
+
+    <p>
+      When run as <span class="command"><strong>ddns-confgen</strong></span>, the generated
+      key is accompanied by configuration text and instructions
+      that can be used with <span class="command"><strong>nsupdate</strong></span> and
+      <span class="command"><strong>named</strong></span> when setting up dynamic DNS,
+      including an example <span class="command"><strong>update-policy</strong></span>
+      statement.  (This usage similar to the
+      <span class="command"><strong>rndc-confgen</strong></span> command for setting
+      up command channel security.)
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543454"></a><h2>OPTIONS</h2>
-<div class="variablelist"><dl>
+
+    <p>
+      Note that <span class="command"><strong>named</strong></span> itself can configure a
+      local DDNS key for use with <span class="command"><strong>nsupdate -l</strong></span>:
+      it does this when a zone is configured with
+      <span class="command"><strong>update-policy local;</strong></span>.
+      <span class="command"><strong>ddns-confgen</strong></span> is only needed when a
+      more elaborate configuration is required: for instance,
+      if <span class="command"><strong>nsupdate</strong></span> is to be used from a remote
+      system.
+    </p>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.8"></a><h2>OPTIONS</h2>
+
+
+    <div class="variablelist"><dl class="variablelist">
 <dt><span class="term">-a <em class="replaceable"><code>algorithm</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
             Specifies the algorithm to use for the TSIG key.  Available
             choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
             hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
-	  </p></dd>
+            Options are case-insensitive, and the "hmac-" prefix
+            may be omitted.
+	  </p>
+	</dd>
 <dt><span class="term">-h</span></dt>
-<dd><p>
-	    Prints a short summary of the options and arguments to
-	    <span><strong class="command">ddns-confgen</strong></span>.
-	  </p></dd>
+<dd>
+	  <p>
+	    Prints a short summary of options and arguments.
+	  </p>
+	</dd>
 <dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
 	    Specifies the key name of the DDNS authentication key.
 	    The default is <code class="constant">ddns-key</code> when neither
 	    the <code class="option">-s</code> nor <code class="option">-z</code> option is
@@ -82,14 +126,19 @@
 	    <code class="constant">ddns-key.example.com.</code>
 	    The key name must have the format of a valid domain name,
 	    consisting of letters, digits, hyphens and periods.
-	  </p></dd>
+	  </p>
+	</dd>
 <dt><span class="term">-q</span></dt>
-<dd><p>
-	    Quiet mode:  Print only the key, with no explanatory text or
-            usage examples.
-	  </p></dd>
+<dd>
+	  <p>
+	    (<span class="command"><strong>ddns-confgen</strong></span> only.) Quiet mode:  Print
+            only the key, with no explanatory text or usage examples;
+            This is essentially identical to <span class="command"><strong>tsig-keygen</strong></span>.
+	  </p>
+	</dd>
 <dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd><p>
+<dd>
+	  <p>
             Specifies a source of random data for generating the
             authorization.  If the operating system does not provide a
             <code class="filename">/dev/random</code> or equivalent device, the
@@ -99,43 +148,55 @@
             instead of the default.  The special value
             <code class="filename">keyboard</code> indicates that keyboard input
             should be used.
-	  </p></dd>
+	  </p>
+	</dd>
 <dt><span class="term">-s <em class="replaceable"><code>name</code></em></span></dt>
-<dd><p>
-	    Single host mode: The example <span><strong class="command">named.conf</strong></span> text
-	    shows how to set an update policy for the specified
-	    <em class="replaceable"><code>name</code></em>
-	    using the "name" nametype.
-	    The default key name is
+<dd>
+	  <p>
+            (<span class="command"><strong>ddns-confgen</strong></span> only.)
+	    Generate configuration example to allow dynamic updates
+            of a single hostname.  The example <span class="command"><strong>named.conf</strong></span>
+            text shows how to set an update policy for the specified
+            <em class="replaceable"><code>name</code></em>
+	    using the "name" nametype.  The default key name is
 	    ddns-key.<em class="replaceable"><code>name</code></em>.
 	    Note that the "self" nametype cannot be used, since
 	    the name to be updated may differ from the key name.
 	    This option cannot be used with the <code class="option">-z</code> option.
-	  </p></dd>
+	  </p>
+	</dd>
 <dt><span class="term">-z <em class="replaceable"><code>zone</code></em></span></dt>
-<dd><p>
-	    zone mode:  The example <span><strong class="command">named.conf</strong></span> text
+<dd>
+	  <p>
+            (<span class="command"><strong>ddns-confgen</strong></span> only.)
+	    Generate configuration example to allow dynamic updates
+            of a zone:  The example <span class="command"><strong>named.conf</strong></span> text
             shows how to set an update policy for the specified
 	    <em class="replaceable"><code>zone</code></em>
-	    using the "zonesub" nametype, allowing updates to all subdomain
-	    names within
-	    that <em class="replaceable"><code>zone</code></em>.
+	    using the "zonesub" nametype, allowing updates to
+            all subdomain names within that
+            <em class="replaceable"><code>zone</code></em>.
 	    This option cannot be used with the <code class="option">-s</code> option.
-	  </p></dd>
+	  </p>
+	</dd>
 </dl></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543642"></a><h2>SEE ALSO</h2>
-<p><span class="citerefentry"><span class="refentrytitle">nsupdate</span>(1)</span>,
-      <span class="citerefentry"><span class="refentrytitle">named.conf</span>(5)</span>,
-      <span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
+  </div>
+
+  <div class="refsection">
+<a name="id-1.9"></a><h2>SEE ALSO</h2>
+
+    <p><span class="citerefentry">
+	<span class="refentrytitle">nsupdate</span>(1)
+      </span>,
+      <span class="citerefentry">
+	<span class="refentrytitle">named.conf</span>(5)
+      </span>,
+      <span class="citerefentry">
+	<span class="refentrytitle">named</span>(8)
+      </span>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543681"></a><h2>AUTHOR</h2>
-<p><span class="corpauthor">Internet Systems Consortium</span>
-    </p>
-</div>
+  </div>
+
 </div></body>
 </html>

bin/confgen/include/confgen/os.h

@@ -1,17 +1,9 @@
 /*
- * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: os.h,v 1.3 2009/06/11 23:47:55 tbox Exp $ */

bin/confgen/keygen.c

@@ -1,17 +1,9 @@
 /*
- * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2012-2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: keygen.c,v 1.4 2009/11/12 14:02:38 marka Exp $ */
@@ -29,9 +21,12 @@
 #include <isc/file.h>
 #include <isc/keyboard.h>
 #include <isc/mem.h>
+#include <isc/print.h>
 #include <isc/result.h>
 #include <isc/string.h>
 
+#include <pk11/site.h>
+
 #include <dns/keyvalues.h>
 #include <dns/name.h>
 
@@ -47,8 +42,10 @@
 const char *
 alg_totext(dns_secalg_t alg) {
 	switch (alg) {
+#ifndef PK11_MD5_DISABLE
 	    case DST_ALG_HMACMD5:
 		return "hmac-md5";
+#endif
 	    case DST_ALG_HMACSHA1:
 		return "hmac-sha1";
 	    case DST_ALG_HMACSHA224:
@@ -69,17 +66,23 @@ alg_totext(dns_secalg_t alg) {
  */
 dns_secalg_t
 alg_fromtext(const char *name) {
-	if (strcmp(name, "hmac-md5") == 0)
+	const char *p = name;
+	if (strncasecmp(p, "hmac-", 5) == 0)
+		p = &name[5];
+
+#ifndef PK11_MD5_DISABLE
+	if (strcasecmp(p, "md5") == 0)
 		return DST_ALG_HMACMD5;
-	if (strcmp(name, "hmac-sha1") == 0)
+#endif
+	if (strcasecmp(p, "sha1") == 0)
 		return DST_ALG_HMACSHA1;
-	if (strcmp(name, "hmac-sha224") == 0)
+	if (strcasecmp(p, "sha224") == 0)
 		return DST_ALG_HMACSHA224;
-	if (strcmp(name, "hmac-sha256") == 0)
+	if (strcasecmp(p, "sha256") == 0)
 		return DST_ALG_HMACSHA256;
-	if (strcmp(name, "hmac-sha384") == 0)
+	if (strcasecmp(p, "sha384") == 0)
 		return DST_ALG_HMACSHA384;
-	if (strcmp(name, "hmac-sha512") == 0)
+	if (strcasecmp(p, "sha512") == 0)
 		return DST_ALG_HMACSHA512;
 	return DST_ALG_UNKNOWN;
 }
@@ -125,14 +128,20 @@ generate_key(isc_mem_t *mctx, const char *randomfile, dns_secalg_t alg,
 	dst_key_t *key = NULL;
 
 	switch (alg) {
+#ifndef PK11_MD5_DISABLE
 	    case DST_ALG_HMACMD5:
+#endif
+	    case DST_ALG_HMACSHA1:
+	    case DST_ALG_HMACSHA224:
+	    case DST_ALG_HMACSHA256:
 		if (keysize < 1 || keysize > 512)
 			fatal("keysize %d out of range (must be 1-512)\n",
 			      keysize);
 		break;
-	    case DST_ALG_HMACSHA256:
-		if (keysize < 1 || keysize > 256)
-			fatal("keysize %d out of range (must be 1-256)\n",
+	    case DST_ALG_HMACSHA384:
+	    case DST_ALG_HMACSHA512:
+		if (keysize < 1 || keysize > 1024)
+			fatal("keysize %d out of range (must be 1-1024)\n",
 			      keysize);
 		break;
 	    default:

bin/confgen/keygen.h

@@ -1,17 +1,9 @@
 /*
- * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: keygen.h,v 1.3 2009/06/11 23:47:55 tbox Exp $ */

bin/confgen/rndc-confgen.8

@@ -1,70 +1,76 @@
-.\" Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
-.\" Copyright (C) 2001, 2003 Internet Software Consortium.
+.\" Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016 Internet Systems Consortium, Inc. ("ISC")
 .\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
-.\" purpose with or without fee is hereby granted, provided that the above
-.\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
-.\"
-.\" $Id: rndc-confgen.8,v 1.7 2009/07/11 01:12:45 tbox Exp $
+.\" This Source Code Form is subject to the terms of the Mozilla Public
+.\" License, v. 2.0. If a copy of the MPL was not distributed with this
+.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
 .\"
 .hy 0
 .ad l
-.\"     Title: rndc\-confgen
+'\" t
+.\"     Title: rndc-confgen
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
-.\"      Date: Aug 27, 2001
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\"      Date: 2013-03-14
 .\"    Manual: BIND9
-.\"    Source: BIND9
+.\"    Source: ISC
+.\"  Language: English
 .\"
-.TH "RNDC\-CONFGEN" "8" "Aug 27, 2001" "BIND9" "BIND9"
+.TH "RNDC\-CONFGEN" "8" "2013\-03\-14" "ISC" "BIND9"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
 .SH "NAME"
-rndc\-confgen \- rndc key generation tool
+rndc-confgen \- rndc key generation tool
 .SH "SYNOPSIS"
-.HP 13
-\fBrndc\-confgen\fR [\fB\-a\fR] [\fB\-b\ \fR\fB\fIkeysize\fR\fR] [\fB\-c\ \fR\fB\fIkeyfile\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-p\ \fR\fB\fIport\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\fB\-s\ \fR\fB\fIaddress\fR\fR] [\fB\-t\ \fR\fB\fIchrootdir\fR\fR] [\fB\-u\ \fR\fB\fIuser\fR\fR]
+.HP \w'\fBrndc\-confgen\fR\ 'u
+\fBrndc\-confgen\fR [\fB\-a\fR] [\fB\-A\ \fR\fB\fIalgorithm\fR\fR] [\fB\-b\ \fR\fB\fIkeysize\fR\fR] [\fB\-c\ \fR\fB\fIkeyfile\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-p\ \fR\fB\fIport\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\fB\-s\ \fR\fB\fIaddress\fR\fR] [\fB\-t\ \fR\fB\fIchrootdir\fR\fR] [\fB\-u\ \fR\fB\fIuser\fR\fR]
 .SH "DESCRIPTION"
 .PP
 \fBrndc\-confgen\fR
 generates configuration files for
-\fBrndc\fR. It can be used as a convenient alternative to writing the
-\fIrndc.conf\fR
+\fBrndc\fR\&. It can be used as a convenient alternative to writing the
+rndc\&.conf
 file and the corresponding
 \fBcontrols\fR
 and
 \fBkey\fR
 statements in
-\fInamed.conf\fR
-by hand. Alternatively, it can be run with the
+named\&.conf
+by hand\&. Alternatively, it can be run with the
 \fB\-a\fR
 option to set up a
-\fIrndc.key\fR
+rndc\&.key
 file and avoid the need for a
-\fIrndc.conf\fR
+rndc\&.conf
 file and a
 \fBcontrols\fR
-statement altogether.
+statement altogether\&.
 .SH "OPTIONS"
 .PP
 \-a
 .RS 4
 Do automatic
 \fBrndc\fR
-configuration. This creates a file
-\fIrndc.key\fR
+configuration\&. This creates a file
+rndc\&.key
 in
-\fI/etc\fR
+/etc
 (or whatever
 \fIsysconfdir\fR
 was specified as when
@@ -73,13 +79,13 @@ was built) that is read by both
 \fBrndc\fR
 and
 \fBnamed\fR
-on startup. The
-\fIrndc.key\fR
+on startup\&. The
+rndc\&.key
 file defines a default command channel and authentication key allowing
 \fBrndc\fR
 to communicate with
 \fBnamed\fR
-on the local host with no further configuration.
+on the local host with no further configuration\&.
 .sp
 Running
 \fBrndc\-confgen \-a\fR
@@ -87,8 +93,8 @@ allows BIND 9 and
 \fBrndc\fR
 to be used as drop\-in replacements for BIND 8 and
 \fBndc\fR, with no changes to the existing BIND 8
-\fInamed.conf\fR
-file.
+named\&.conf
+file\&.
 .sp
 If a more elaborate configuration than that generated by
 \fBrndc\-confgen \-a\fR
@@ -97,15 +103,20 @@ is required, for example if rndc is to be used remotely, you should run
 without the
 \fB\-a\fR
 option and set up a
-\fIrndc.conf\fR
+rndc\&.conf
 and
-\fInamed.conf\fR
-as directed.
+named\&.conf
+as directed\&.
+.RE
+.PP
+\-A \fIalgorithm\fR
+.RS 4
+Specifies the algorithm to use for the TSIG key\&. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512\&. The default is hmac\-md5 or if MD5 was disabled hmac\-sha256\&.
 .RE
 .PP
 \-b \fIkeysize\fR
 .RS 4
-Specifies the size of the authentication key in bits. Must be between 1 and 512 bits; the default is 128.
+Specifies the size of the authentication key in bits\&. Must be between 1 and 512 bits; the default is the hash size\&.
 .RE
 .PP
 \-c \fIkeyfile\fR
@@ -113,19 +124,19 @@ Specifies the size of the authentication key in bits. Must be between 1 and 512
 Used with the
 \fB\-a\fR
 option to specify an alternate location for
-\fIrndc.key\fR.
+rndc\&.key\&.
 .RE
 .PP
 \-h
 .RS 4
 Prints a short summary of the options and arguments to
-\fBrndc\-confgen\fR.
+\fBrndc\-confgen\fR\&.
 .RE
 .PP
 \-k \fIkeyname\fR
 .RS 4
-Specifies the key name of the rndc authentication key. This must be a valid domain name. The default is
-\fBrndc\-key\fR.
+Specifies the key name of the rndc authentication key\&. This must be a valid domain name\&. The default is
+\fBrndc\-key\fR\&.
 .RE
 .PP
 \-p \fIport\fR
@@ -133,18 +144,18 @@ Specifies the key name of the rndc authentication key. This must be a valid doma
 Specifies the command channel port where
 \fBnamed\fR
 listens for connections from
-\fBrndc\fR. The default is 953.
+\fBrndc\fR\&. The default is 953\&.
 .RE
 .PP
 \-r \fIrandomfile\fR
 .RS 4
-Specifies a source of random data for generating the authorization. If the operating system does not provide a
-\fI/dev/random\fR
-or equivalent device, the default source of randomness is keyboard input.
-\fIrandomdev\fR
-specifies the name of a character device or file containing random data to be used instead of the default. The special value
-\fIkeyboard\fR
-indicates that keyboard input should be used.
+Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
+/dev/random
+or equivalent device, the default source of randomness is keyboard input\&.
+randomdev
+specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
+keyboard
+indicates that keyboard input should be used\&.
 .RE
 .PP
 \-s \fIaddress\fR
@@ -152,7 +163,7 @@ indicates that keyboard input should be used.
 Specifies the IP address where
 \fBnamed\fR
 listens for command channel connections from
-\fBrndc\fR. The default is the loopback address 127.0.0.1.
+\fBrndc\fR\&. The default is the loopback address 127\&.0\&.0\&.1\&.
 .RE
 .PP
 \-t \fIchrootdir\fR
@@ -161,10 +172,10 @@ Used with the
 \fB\-a\fR
 option to specify a directory where
 \fBnamed\fR
-will run chrooted. An additional copy of the
-\fIrndc.key\fR
+will run chrooted\&. An additional copy of the
+rndc\&.key
 will be written relative to this directory so that it will be found by the chrooted
-\fBnamed\fR.
+\fBnamed\fR\&.
 .RE
 .PP
 \-u \fIuser\fR
@@ -172,10 +183,10 @@ will be written relative to this directory so that it will be found by the chroo
 Used with the
 \fB\-a\fR
 option to set the owner of the
-\fIrndc.key\fR
-file generated. If
+rndc\&.key
+file generated\&. If
 \fB\-t\fR
-is also specified only the file in the chroot area has its owner changed.
+is also specified only the file in the chroot area has its owner changed\&.
 .RE
 .SH "EXAMPLES"
 .PP
@@ -186,13 +197,13 @@ to be used with no manual configuration, run
 \fBrndc\-confgen \-a\fR
 .PP
 To print a sample
-\fIrndc.conf\fR
+rndc\&.conf
 file and corresponding
 \fBcontrols\fR
 and
 \fBkey\fR
 statements to be manually inserted into
-\fInamed.conf\fR, run
+named\&.conf, run
 .PP
 \fBrndc\-confgen\fR
 .SH "SEE ALSO"
@@ -200,12 +211,11 @@ statements to be manually inserted into
 \fBrndc\fR(8),
 \fBrndc.conf\fR(5),
 \fBnamed\fR(8),
-BIND 9 Administrator Reference Manual.
+BIND 9 Administrator Reference Manual\&.
 .SH "AUTHOR"
 .PP
-Internet Systems Consortium
+\fBInternet Systems Consortium, Inc\&.\fR
 .SH "COPYRIGHT"
-Copyright \(co 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2001, 2003 Internet Software Consortium.
+Copyright \(co 2001, 2003-2005, 2007, 2009, 2013-2016 Internet Systems Consortium, Inc. ("ISC")
 .br

bin/confgen/rndc-confgen.c

@@ -1,18 +1,9 @@
 /*
- * Copyright (C) 2004, 2005, 2007-2009, 2011  Internet Systems Consortium, Inc. ("ISC")
- * Copyright (C) 2001, 2003  Internet Software Consortium.
+ * Copyright (C) 2001, 2003-2005, 2007-2009, 2011, 2013, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: rndc-confgen.c,v 1.7 2011/03/12 04:59:46 tbox Exp $ */
@@ -48,6 +39,8 @@
 #include <isc/time.h>
 #include <isc/util.h>
 
+#include <pk11/site.h>
+
 #include <dns/keyvalues.h>
 #include <dns/name.h>
 
@@ -57,7 +50,6 @@
 #include "util.h"
 #include "keygen.h"
 
-#define DEFAULT_KEYLENGTH	128		/*% Bits. */
 #define DEFAULT_KEYNAME		"rndc-key"
 #define DEFAULT_SERVER		"127.0.0.1"
 #define DEFAULT_PORT		953
@@ -75,12 +67,14 @@ usage(int status) ISC_PLATFORM_NORETURN_POST;
 static void
 usage(int status) {
 
+#ifndef PK11_MD5_DISABLE
 	fprintf(stderr, "\
 Usage:\n\
  %s [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-r randomfile] \
 [-s addr] [-t chrootdir] [-u user]\n\
   -a:		 generate just the key clause and write it to keyfile (%s)\n\
-  -b bits:	 from 1 through 512, default %d; total length of the secret\n\
+  -A alg:	 algorithm (default hmac-md5)\n\
+  -b bits:	 from 1 through 512, default 256; total length of the secret\n\
   -c keyfile:	 specify an alternate key file (requires -a)\n\
   -k keyname:	 the name as it will be used  in named.conf and rndc.conf\n\
   -p port:	 the port named will listen on and rndc will connect to\n\
@@ -88,7 +82,24 @@ Usage:\n\
   -s addr:	 the address to which rndc should connect\n\
   -t chrootdir:	 write a keyfile in chrootdir as well (requires -a)\n\
   -u user:	 set the keyfile owner to \"user\" (requires -a)\n",
-		 progname, keydef, DEFAULT_KEYLENGTH);
+		 progname, keydef);
+#else
+	fprintf(stderr, "\
+Usage:\n\
+ %s [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-r randomfile] \
+[-s addr] [-t chrootdir] [-u user]\n\
+  -a:		 generate just the key clause and write it to keyfile (%s)\n\
+  -A alg:	 algorithm (default hmac-sha256)\n\
+  -b bits:	 from 1 through 512, default 256; total length of the secret\n\
+  -c keyfile:	 specify an alternate key file (requires -a)\n\
+  -k keyname:	 the name as it will be used  in named.conf and rndc.conf\n\
+  -p port:	 the port named will listen on and rndc will connect to\n\
+  -r randomfile: source of random data (use \"keyboard\" for key timing)\n\
+  -s addr:	 the address to which rndc should connect\n\
+  -t chrootdir:	 write a keyfile in chrootdir as well (requires -a)\n\
+  -u user:	 set the keyfile owner to \"user\" (requires -a)\n",
+		 progname, keydef);
+#endif
 
 	exit (status);
 }
@@ -103,12 +114,12 @@ main(int argc, char **argv) {
 	const char *keyname = NULL;
 	const char *randomfile = NULL;
 	const char *serveraddr = NULL;
-	dns_secalg_t alg = DST_ALG_HMACMD5;
-	const char *algname = alg_totext(alg);
+	dns_secalg_t alg;
+	const char *algname;
 	char *p;
 	int ch;
 	int port;
-	int keysize;
+	int keysize = -1;
 	struct in_addr addr4_dummy;
 	struct in6_addr addr6_dummy;
 	char *chrootdir = NULL;
@@ -120,28 +131,37 @@ main(int argc, char **argv) {
 
 	result = isc_file_progname(*argv, program, sizeof(program));
 	if (result != ISC_R_SUCCESS)
-		memcpy(program, "rndc-confgen", 13);
+		memmove(program, "rndc-confgen", 13);
 	progname = program;
 
 	keyname = DEFAULT_KEYNAME;
-	keysize = DEFAULT_KEYLENGTH;
+#ifndef PK11_MD5_DISABLE
+	alg = DST_ALG_HMACMD5;
+#else
+	alg = DST_ALG_HMACSHA256;
+#endif
 	serveraddr = DEFAULT_SERVER;
 	port = DEFAULT_PORT;
 
 	isc_commandline_errprint = ISC_FALSE;
 
 	while ((ch = isc_commandline_parse(argc, argv,
-					   "ab:c:hk:Mmp:r:s:t:u:Vy")) != -1) {
+					   "aA:b:c:hk:Mmp:r:s:t:u:Vy")) != -1)
+	{
 		switch (ch) {
 		case 'a':
 			keyonly = ISC_TRUE;
 			break;
+		case 'A':
+			algname = isc_commandline_argument;
+			alg = alg_fromtext(algname);
+			if (alg == DST_ALG_UNKNOWN)
+				fatal("Unsupported algorithm '%s'", algname);
+			break;
 		case 'b':
 			keysize = strtol(isc_commandline_argument, &p, 10);
 			if (*p != '\0' || keysize < 0)
 				fatal("-b requires a non-negative number");
-			if (keysize < 1 || keysize > 512)
-				fatal("-b must be in the range 1 through 512");
 			break;
 		case 'c':
 			keyfile = isc_commandline_argument;
@@ -205,6 +225,10 @@ main(int argc, char **argv) {
 	if (argc > 0)
 		usage(1);
 
+	if (keysize < 0)
+		keysize = alg_bits(alg);
+	algname = alg_totext(alg);
+
 	DO("create memory context", isc_mem_create(0, 0, &mctx));
 	isc_buffer_init(&key_txtbuffer, &key_txtsecret, sizeof(key_txtsecret));
 

bin/confgen/rndc-confgen.docbook

@@ -1,27 +1,19 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
-	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) 2004, 2005, 2007, 2009  Internet Systems Consortium, Inc. ("ISC")
- - Copyright (C) 2001, 2003  Internet Software Consortium.
+ - Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016  Internet Systems Consortium, Inc. ("ISC")
  -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
 
-<!-- $Id: rndc-confgen.docbook,v 1.4 2009/06/15 23:47:59 tbox Exp $ -->
-<refentry id="man.rndc-confgen">
+<!-- Converted by db4-upgrade version 1.0 -->
+<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.rndc-confgen">
+  <info>
+    <date>2013-03-14</date>
+  </info>
   <refentryinfo>
-    <date>Aug 27, 2001</date>
+    <corpname>ISC</corpname>
+    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
   </refentryinfo>
 
   <refmeta>
@@ -37,37 +29,39 @@
 
   <docinfo>
     <copyright>
+      <year>2001</year>
+      <year>2003</year>
       <year>2004</year>
       <year>2005</year>
       <year>2007</year>
       <year>2009</year>
+      <year>2013</year>
+      <year>2014</year>
+      <year>2015</year>
+      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
-    <copyright>
-      <year>2001</year>
-      <year>2003</year>
-      <holder>Internet Software Consortium.</holder>
-    </copyright>
   </docinfo>
 
   <refsynopsisdiv>
-    <cmdsynopsis>
+    <cmdsynopsis sepchar=" ">
       <command>rndc-confgen</command>
-      <arg><option>-a</option></arg>
-      <arg><option>-b <replaceable class="parameter">keysize</replaceable></option></arg>
-      <arg><option>-c <replaceable class="parameter">keyfile</replaceable></option></arg>
-      <arg><option>-h</option></arg>
-      <arg><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg><option>-p <replaceable class="parameter">port</replaceable></option></arg>
-      <arg><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <arg><option>-s <replaceable class="parameter">address</replaceable></option></arg>
-      <arg><option>-t <replaceable class="parameter">chrootdir</replaceable></option></arg>
-      <arg><option>-u <replaceable class="parameter">user</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-a</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-A <replaceable class="parameter">algorithm</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-b <replaceable class="parameter">keysize</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">keyfile</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-p <replaceable class="parameter">port</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">address</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">chrootdir</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-u <replaceable class="parameter">user</replaceable></option></arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsect1>
-    <title>DESCRIPTION</title>
+  <refsection><info><title>DESCRIPTION</title></info>
+
     <para><command>rndc-confgen</command>
       generates configuration files
       for <command>rndc</command>.  It can be used as a
@@ -82,10 +76,10 @@
       and a <command>controls</command> statement altogether.
     </para>
 
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>OPTIONS</title></info>
 
-  <refsect1>
-    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -128,12 +122,25 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term>-A <replaceable class="parameter">algorithm</replaceable></term>
+        <listitem>
+          <para>
+            Specifies the algorithm to use for the TSIG key.  Available
+            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
+            hmac-sha384 and hmac-sha512.  The default is hmac-md5 or
+            if MD5 was disabled hmac-sha256.
+          </para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term>-b <replaceable class="parameter">keysize</replaceable></term>
         <listitem>
           <para>
             Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is 128.
+            Must be between 1 and 512 bits; the default is the
+            hash size.
           </para>
         </listitem>
       </varlistentry>
@@ -239,10 +246,10 @@
       </varlistentry>
 
     </variablelist>
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>EXAMPLES</title></info>
 
-  <refsect1>
-    <title>EXAMPLES</title>
     <para>
       To allow <command>rndc</command> to be used with
       no manual configuration, run
@@ -257,10 +264,10 @@
     </para>
     <para><userinput>rndc-confgen</userinput>
     </para>
-  </refsect1>
+  </refsection>
+
+  <refsection><info><title>SEE ALSO</title></info>
 
-  <refsect1>
-    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>rndc</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
@@ -272,16 +279,6 @@
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsect1>
+  </refsection>
 
-  <refsect1>
-    <title>AUTHOR</title>
-    <para><corpauthor>Internet Systems Consortium</corpauthor>
-    </para>
-  </refsect1>
-
-</refentry><!--
- - Local variables:
- - mode: sgml
- - End:
--->
+</refentry>

bin/confgen/rndc-confgen.html

@@ -1,121 +1,163 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
- - Copyright (C) 2001, 2003 Internet Software Consortium.
+ - Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016 Internet Systems Consortium, Inc. ("ISC")
  - 
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
 -->
-<!-- $Id: rndc-confgen.html,v 1.7 2009/07/11 01:12:45 tbox Exp $ -->
-<html>
+<html lang="en">
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>rndc-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
 <a name="man.rndc-confgen"></a><div class="titlepage"></div>
-<div class="refnamediv">
+  
+  
+
+  
+
+  <div class="refnamediv">
 <h2>Name</h2>
-<p><span class="application">rndc-confgen</span> &#8212; rndc key generation tool</p>
+<p>
+    <span class="application">rndc-confgen</span>
+     &#8212; rndc key generation tool
+  </p>
 </div>
-<div class="refsynopsisdiv">
+
+  
+
+  <div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-<div class="cmdsynopsis"><p><code class="command">rndc-confgen</code>  [<code class="option">-a</code>] [<code class="option">-b <em class="replaceable"><code>keysize</code></em></code>] [<code class="option">-c <em class="replaceable"><code>keyfile</code></em></code>] [<code class="option">-h</code>] [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>] [<code class="option">-p <em class="replaceable"><code>port</code></em></code>] [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>] [<code class="option">-s <em class="replaceable"><code>address</code></em></code>] [<code class="option">-t <em class="replaceable"><code>chrootdir</code></em></code>] [<code class="option">-u <em class="replaceable"><code>user</code></em></code>]</p></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543432"></a><h2>DESCRIPTION</h2>
-<p><span><strong class="command">rndc-confgen</strong></span>
+    <div class="cmdsynopsis"><p>
+      <code class="command">rndc-confgen</code> 
+       [<code class="option">-a</code>]
+       [<code class="option">-A <em class="replaceable"><code>algorithm</code></em></code>]
+       [<code class="option">-b <em class="replaceable"><code>keysize</code></em></code>]
+       [<code class="option">-c <em class="replaceable"><code>keyfile</code></em></code>]
+       [<code class="option">-h</code>]
+       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
+       [<code class="option">-p <em class="replaceable"><code>port</code></em></code>]
+       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
+       [<code class="option">-s <em class="replaceable"><code>address</code></em></code>]
+       [<code class="option">-t <em class="replaceable"><code>chrootdir</code></em></code>]
+       [<code class="option">-u <em class="replaceable"><code>user</code></em></code>]
+    </p></div>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.7"></a><h2>DESCRIPTION</h2>
+
+    <p><span class="command"><strong>rndc-confgen</strong></span>
       generates configuration files
-      for <span><strong class="command">rndc</strong></span>.  It can be used as a
+      for <span class="command"><strong>rndc</strong></span>.  It can be used as a
       convenient alternative to writing the
       <code class="filename">rndc.conf</code> file
-      and the corresponding <span><strong class="command">controls</strong></span>
-      and <span><strong class="command">key</strong></span>
+      and the corresponding <span class="command"><strong>controls</strong></span>
+      and <span class="command"><strong>key</strong></span>
       statements in <code class="filename">named.conf</code> by hand.
-      Alternatively, it can be run with the <span><strong class="command">-a</strong></span>
+      Alternatively, it can be run with the <span class="command"><strong>-a</strong></span>
       option to set up a <code class="filename">rndc.key</code> file and
       avoid the need for a <code class="filename">rndc.conf</code> file
-      and a <span><strong class="command">controls</strong></span> statement altogether.
+      and a <span class="command"><strong>controls</strong></span> statement altogether.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543477"></a><h2>OPTIONS</h2>
-<div class="variablelist"><dl>
+
+  </div>
+
+  <div class="refsection">
+<a name="id-1.8"></a><h2>OPTIONS</h2>
+
+
+    <div class="variablelist"><dl class="variablelist">
 <dt><span class="term">-a</span></dt>
 <dd>
-<p>
-            Do automatic <span><strong class="command">rndc</strong></span> configuration.
+          <p>
+            Do automatic <span class="command"><strong>rndc</strong></span> configuration.
             This creates a file <code class="filename">rndc.key</code>
             in <code class="filename">/etc</code> (or whatever
             <code class="varname">sysconfdir</code>
             was specified as when <acronym class="acronym">BIND</acronym> was
             built)
-            that is read by both <span><strong class="command">rndc</strong></span>
-            and <span><strong class="command">named</strong></span> on startup.  The
+            that is read by both <span class="command"><strong>rndc</strong></span>
+            and <span class="command"><strong>named</strong></span> on startup.  The
             <code class="filename">rndc.key</code> file defines a default
             command channel and authentication key allowing
-            <span><strong class="command">rndc</strong></span> to communicate with
-            <span><strong class="command">named</strong></span> on the local host
+            <span class="command"><strong>rndc</strong></span> to communicate with
+            <span class="command"><strong>named</strong></span> on the local host
             with no further configuration.
           </p>
-<p>
-            Running <span><strong class="command">rndc-confgen -a</strong></span> allows
-            BIND 9 and <span><strong class="command">rndc</strong></span> to be used as
+          <p>
+            Running <span class="command"><strong>rndc-confgen -a</strong></span> allows
+            BIND 9 and <span class="command"><strong>rndc</strong></span> to be used as
             drop-in
-            replacements for BIND 8 and <span><strong class="command">ndc</strong></span>,
+            replacements for BIND 8 and <span class="command"><strong>ndc</strong></span>,
             with no changes to the existing BIND 8
             <code class="filename">named.conf</code> file.
           </p>
-<p>
+          <p>
             If a more elaborate configuration than that
-            generated by <span><strong class="command">rndc-confgen -a</strong></span>
+            generated by <span class="command"><strong>rndc-confgen -a</strong></span>
             is required, for example if rndc is to be used remotely,
-            you should run <span><strong class="command">rndc-confgen</strong></span> without
+            you should run <span class="command"><strong>rndc-confgen</strong></span> without
             the
-            <span><strong class="command">-a</strong></span> option and set up a
+            <span class="command"><strong>-a</strong></span> option and set up a
             <code class="filename">rndc.conf</code> and
             <code class="filename">named.conf</code>
             as directed.
           </p>
-</dd>
+        </dd>
+<dt><span class="term">-A <em class="replaceable"><code>algorithm</code></em></span></dt>
+<dd>
+          <p>
+            Specifies the algorithm to use for the TSIG key.  Available
+            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
+            hmac-sha384 and hmac-sha512.  The default is hmac-md5 or
+            if MD5 was disabled hmac-sha256.
+          </p>
+        </dd>
 <dt><span class="term">-b <em class="replaceable"><code>keysize</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is 128.
-          </p></dd>
+            Must be between 1 and 512 bits; the default is the
+            hash size.
+          </p>
+        </dd>
 <dt><span class="term">-c <em class="replaceable"><code>keyfile</code></em></span></dt>
-<dd><p>
-            Used with the <span><strong class="command">-a</strong></span> option to specify
+<dd>
+          <p>
+            Used with the <span class="command"><strong>-a</strong></span> option to specify
             an alternate location for <code class="filename">rndc.key</code>.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-h</span></dt>
-<dd><p>
+<dd>
+          <p>
             Prints a short summary of the options and arguments to
-            <span><strong class="command">rndc-confgen</strong></span>.
-          </p></dd>
+            <span class="command"><strong>rndc-confgen</strong></span>.
+          </p>
+        </dd>
 <dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Specifies the key name of the rndc authentication key.
             This must be a valid domain name.
             The default is <code class="constant">rndc-key</code>.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-p <em class="replaceable"><code>port</code></em></span></dt>
-<dd><p>
-            Specifies the command channel port where <span><strong class="command">named</strong></span>
-            listens for connections from <span><strong class="command">rndc</strong></span>.
+<dd>
+          <p>
+            Specifies the command channel port where <span class="command"><strong>named</strong></span>
+            listens for connections from <span class="command"><strong>rndc</strong></span>.
             The default is 953.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd><p>
+<dd>
+          <p>
             Specifies a source of random data for generating the
             authorization.  If the operating
             system does not provide a <code class="filename">/dev/random</code>
@@ -126,63 +168,76 @@
             data to be used instead of the default.  The special value
             <code class="filename">keyboard</code> indicates that keyboard
             input should be used.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-s <em class="replaceable"><code>address</code></em></span></dt>
-<dd><p>
-            Specifies the IP address where <span><strong class="command">named</strong></span>
+<dd>
+          <p>
+            Specifies the IP address where <span class="command"><strong>named</strong></span>
             listens for command channel connections from
-            <span><strong class="command">rndc</strong></span>.  The default is the loopback
+            <span class="command"><strong>rndc</strong></span>.  The default is the loopback
             address 127.0.0.1.
-          </p></dd>
+          </p>
+        </dd>
 <dt><span class="term">-t <em class="replaceable"><code>chrootdir</code></em></span></dt>
-<dd><p>
-            Used with the <span><strong class="command">-a</strong></span> option to specify
-            a directory where <span><strong class="command">named</strong></span> will run
+<dd>
+          <p>
+            Used with the <span class="command"><strong>-a</strong></span> option to specify
+            a directory where <span class="command"><strong>named</strong></span> will run
             chrooted.  An additional copy of the <code class="filename">rndc.key</code>
             will be written relative to this directory so that
-            it will be found by the chrooted <span><strong class="command">named</strong></span>.
-          </p></dd>
+            it will be found by the chrooted <span class="command"><strong>named</strong></span>.
+          </p>
+        </dd>
 <dt><span class="term">-u <em class="replaceable"><code>user</code></em></span></dt>
-<dd><p>
-            Used with the <span><strong class="command">-a</strong></span> option to set the
+<dd>
+          <p>
+            Used with the <span class="command"><strong>-a</strong></span> option to set the
             owner
             of the <code class="filename">rndc.key</code> file generated.
             If
-            <span><strong class="command">-t</strong></span> is also specified only the file
+            <span class="command"><strong>-t</strong></span> is also specified only the file
             in
             the chroot area has its owner changed.
-          </p></dd>
+          </p>
+        </dd>
 </dl></div>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543790"></a><h2>EXAMPLES</h2>
-<p>
-      To allow <span><strong class="command">rndc</strong></span> to be used with
+  </div>
+
+  <div class="refsection">
+<a name="id-1.9"></a><h2>EXAMPLES</h2>
+
+    <p>
+      To allow <span class="command"><strong>rndc</strong></span> to be used with
       no manual configuration, run
     </p>
-<p><strong class="userinput"><code>rndc-confgen -a</code></strong>
+    <p><strong class="userinput"><code>rndc-confgen -a</code></strong>
     </p>
-<p>
+    <p>
       To print a sample <code class="filename">rndc.conf</code> file and
-      corresponding <span><strong class="command">controls</strong></span> and <span><strong class="command">key</strong></span>
+      corresponding <span class="command"><strong>controls</strong></span> and <span class="command"><strong>key</strong></span>
       statements to be manually inserted into <code class="filename">named.conf</code>,
       run
     </p>
-<p><strong class="userinput"><code>rndc-confgen</code></strong>
+    <p><strong class="userinput"><code>rndc-confgen</code></strong>
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543832"></a><h2>SEE ALSO</h2>
-<p><span class="citerefentry"><span class="refentrytitle">rndc</span>(8)</span>,
-      <span class="citerefentry"><span class="refentrytitle">rndc.conf</span>(5)</span>,
-      <span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
+  </div>
+
+  <div class="refsection">
+<a name="id-1.10"></a><h2>SEE ALSO</h2>
+
+    <p><span class="citerefentry">
+        <span class="refentrytitle">rndc</span>(8)
+      </span>,
+      <span class="citerefentry">
+        <span class="refentrytitle">rndc.conf</span>(5)
+      </span>,
+      <span class="citerefentry">
+        <span class="refentrytitle">named</span>(8)
+      </span>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-</div>
-<div class="refsect1" lang="en">
-<a name="id2543870"></a><h2>AUTHOR</h2>
-<p><span class="corpauthor">Internet Systems Consortium</span>
-    </p>
-</div>
+  </div>
+
 </div></body>
 </html>

bin/confgen/unix/.cvsignore

@@ -1 +0,0 @@
-Makefile

bin/confgen/unix/Makefile.in

@@ -1,16 +1,8 @@
-# Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2009, 2012, 2016  Internet Systems Consortium, Inc. ("ISC")
 #
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
 
 # $Id: Makefile.in,v 1.3 2009/06/11 23:47:55 tbox Exp $
 

bin/confgen/unix/os.c

@@ -1,17 +1,9 @@
 /*
- * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: os.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */

bin/confgen/util.c

@@ -1,17 +1,9 @@
 /*
- * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2015, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: util.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
@@ -25,6 +17,7 @@
 #include <stdio.h>
 
 #include <isc/boolean.h>
+#include <isc/print.h>
 
 #include "util.h"
 

bin/confgen/util.h

@@ -1,17 +1,9 @@
 /*
- * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: util.h,v 1.4 2009/09/29 15:06:05 fdupont Exp $ */

bin/confgen/win32/confgentool.dsp

@@ -1,135 +0,0 @@
-# Microsoft Developer Studio Project File - Name="confgentool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static-Link Library" 0x0104
-
-CFG=confgentool - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak" CFG="confgentool - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "confgentool - Win32 Release" (based on "Win32 (x86) Static-Link Library")
-!MESSAGE "confgentool - Win32 Debug" (based on "Win32 (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "confgentool - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /YX /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /YX /FD /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Release/confgentool.lib"
-
-!ELSEIF  "$(CFG)" == "confgentool - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR /YX /FD /GZ /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug /out:"Debug/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Debug/confgentool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "confgentool - Win32 Release"
-# Name "confgentool - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\keygen.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\keygen.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\os.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/confgen/win32/confgentool.dsp.in

@@ -0,0 +1,135 @@
+# Microsoft Developer Studio Project File - Name="confgentool" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
+
+CFG=confgentool - @PLATFORM@ Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "confgentool.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "confgentool.mak" CFG="confgentool - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "confgentool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
+!MESSAGE "confgentool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "confgentool - @PLATFORM@ Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
+# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdconfgentool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /out:"Release/confgentool.lib"
+LIB32=lib.exe
+# ADD BASE LIB32
+# ADD LIB32 /out:"Release/confgentool.lib"
+
+!ELSEIF  "$(CFG)" == "confgentool - @PLATFORM@ Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdconfgentool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /debug /out:"Debug/confgentool.lib"
+LIB32=lib.exe
+# ADD BASE LIB32
+# ADD LIB32 /out:"Debug/confgentool.lib"
+
+!ENDIF 
+
+# Begin Target
+
+# Name "confgentool - @PLATFORM@ Release"
+# Name "confgentool - @PLATFORM@ Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\keygen.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\util.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# Begin Group "Main Dns Lib"
+
+# PROP Default_Filter "c"
+# Begin Source File
+
+SOURCE=..\keygen.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\util.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\os.c
+# End Source File
+# End Group
+# End Target
+# End Project

bin/confgen/win32/confgentool.vcxproj.filters.in

@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="..\keygen.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="..\util.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="..\include\confgen\os.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\keygen.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\util.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="os.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

bin/confgen/win32/confgentool.vcxproj.in

@@ -0,0 +1,109 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|@PLATFORM@">
+      <Configuration>Debug</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|@PLATFORM@">
+      <Configuration>Release</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{64964B03-4815-41F0-9057-E766A94AF197}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>confgentool</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <LinkIncremental>true</LinkIncremental>
+    <OutDir>.\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>.\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <ClCompile>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>Level3</WarningLevel>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <BrowseInformation>true</BrowseInformation>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <Optimization>MaxSpeed</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+      <StringPooling>true</StringPooling>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <LinkTimeCodeGeneration>false</LinkTimeCodeGeneration>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="..\include\confgen\os.h" />
+    <ClInclude Include="..\keygen.h" />
+    <ClInclude Include="..\util.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\keygen.c" />
+    <ClCompile Include="..\util.c" />
+    <ClCompile Include="os.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

bin/confgen/win32/confgentool.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

bin/confgen/win32/ddnsconfgen.dsp

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="ddnsconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=ddnsconfgen - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "ddnsconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/ddns-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "ddnsconfgen - Win32 Release"
-# Name "ddnsconfgen - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\ddns-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/ddnsconfgen.dsp.in

@@ -0,0 +1,103 @@
+# Microsoft Developer Studio Project File - Name="ddnsconfgen" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
+
+CFG=ddnsconfgen - @PLATFORM@ Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "ddnsconfgen.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe"
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X @COPTY@
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "ddnsconfgen - @PLATFORM@ Release"
+# Name "ddnsconfgen - @PLATFORM@ Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\ddns-confgen.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/confgen/win32/ddnsconfgen.mak

@@ -1,337 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on ddnsconfgen.dsp
-!IF "$(CFG)" == ""
-CFG=ddnsconfgen - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to ddnsconfgen - Win32 Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "ddnsconfgen - Win32 Release" && "$(CFG)" != "ddnsconfgen - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "ddnsconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\ddns-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\ddns-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\ddnsconfgen.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\ddns-confgen.pdb" /machine:I386 /out:"../../../Build/Release/ddns-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\ddns-confgen.exe" "$(OUTDIR)\ddnsconfgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\ddns-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\ddnsconfgen.bsc"
-	-@erase "$(OUTDIR)\ddns-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.exe"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\ddns-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\ddnsconfgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\ddns-confgen.pdb" /debug /machine:I386 /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("ddnsconfgen.dep")
-!INCLUDE "ddnsconfgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "ddnsconfgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "ddnsconfgen - Win32 Release" || "$(CFG)" == "ddnsconfgen - Win32 Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\ddns-confgen.c"
-
-!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
-
-
-"$(INTDIR)\ddns-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
-
-
-"$(INTDIR)\ddns-confgen.obj"	"$(INTDIR)\ddns-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/ddnsconfgen.mak.in

@@ -0,0 +1,337 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on ddnsconfgen.dsp
+!IF "$(CFG)" == ""
+CFG=ddnsconfgen - @PLATFORM@ Debug
+!MESSAGE No configuration specified. Defaulting to ddnsconfgen - @PLATFORM@ Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "ddnsconfgen - @PLATFORM@ Release" && "$(CFG)" != "ddnsconfgen - @PLATFORM@ Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+ALL : "..\..\..\Build\Release\ddns-confgen.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\ddns-confgen.obj"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\ddns-confgen.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\ddnsconfgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\ddns-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\ddns-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Release\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "..\..\..\Build\Debug\ddns-confgen.exe" "$(OUTDIR)\ddnsconfgen.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\os.sbr"
+	-@erase "$(INTDIR)\ddns-confgen.obj"
+	-@erase "$(INTDIR)\ddns-confgen.sbr"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\keygen.sbr"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\util.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\ddnsconfgen.bsc"
+	-@erase "$(OUTDIR)\ddns-confgen.pdb"
+	-@erase "..\..\..\Build\Debug\ddns-confgen.exe"
+	-@erase "..\..\..\Build\Debug\ddns-confgen.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\os.sbr" \
+	"$(INTDIR)\ddns-confgen.sbr" \
+	"$(INTDIR)\keygen.sbr" \
+	"$(INTDIR)\util.sbr"
+
+"$(OUTDIR)\ddnsconfgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\ddns-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\ddns-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Debug\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("ddnsconfgen.dep")
+!INCLUDE "ddnsconfgen.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "ddnsconfgen.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release" || "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
+SOURCE=.\os.c
+
+!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
+
+
+!ENDIF 
+
+SOURCE="..\ddns-confgen.c"
+
+!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\ddns-confgen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\ddns-confgen.obj"	"$(INTDIR)\ddns-confgen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\keygen.c
+
+!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\util.c
+
+!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/confgen/win32/ddnsconfgen.vcxproj.filters.in

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\ddns-confgen.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.in

@@ -0,0 +1,121 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|@PLATFORM@">
+      <Configuration>Debug</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|@PLATFORM@">
+      <Configuration>Release</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{1EA4FC64-F33B-4A50-970A-EA052BBE9CF1}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>ddnsconfgen</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <LinkIncremental>true</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>ddns-confgen</TargetName>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>ddns-confgen</TargetName>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <ClCompile>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>Level3</WarningLevel>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <BrowseInformation>true</BrowseInformation>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+    <PostBuildEvent>
+      <Command>cd ..\..\..\Build\$(Configuration)
+copy /Y ddns-confgen.exe tsig-keygen.exe
+copy /Y ddns-confgen.ilk tsig-keygen.ilk
+</Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <Optimization>MaxSpeed</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+      <StringPooling>true</StringPooling>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>false</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+    <PostBuildEvent>
+      <Command>cd ..\..\..\Build\$(Configuration)
+copy /Y ddns-confgen.exe tsig-keygen.exe
+</Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\ddns-confgen.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

bin/confgen/win32/os.c

@@ -1,17 +1,9 @@
 /*
- * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
  */
 
 /* $Id: os.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */

bin/confgen/win32/rndcconfgen.dsp

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="rndcconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=rndcconfgen - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "rndcconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/rndc-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "rndcconfgen - Win32 Release"
-# Name "rndcconfgen - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\rndc-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/rndcconfgen.dsp.in

@@ -0,0 +1,103 @@
+# Microsoft Developer Studio Project File - Name="rndcconfgen" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
+
+CFG=rndcconfgen - @PLATFORM@ Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "rndcconfgen.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe"
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X @COPTY@
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "rndcconfgen - @PLATFORM@ Release"
+# Name "rndcconfgen - @PLATFORM@ Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\rndc-confgen.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/confgen/win32/rndcconfgen.mak

@@ -1,336 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on confgen.dsp
-!IF "$(CFG)" == ""
-CFG=rndcconfgen - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to rndcconfgen - Win32 Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "rndcconfgen - Win32 Release" && "$(CFG)" != "rndcconfgen - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "rndcconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\rndc-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\rndc-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\confgen.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rndc-confgen.pdb" /machine:I386 /out:"../../../Build/Release/rndc-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\rndc-confgen.exe" "$(OUTDIR)\confgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\rndc-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\confgen.bsc"
-	-@erase "$(OUTDIR)\rndc-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.exe"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\rndc-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\confgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\rndc-confgen.pdb" /debug /machine:I386 /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("confgen.dep")
-!INCLUDE "confgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "confgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "rndcconfgen - Win32 Release" || "$(CFG)" == "rndcconfgen - Win32 Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\rndc-confgen.c"
-
-!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
-
-
-"$(INTDIR)\rndc-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
-
-
-"$(INTDIR)\rndc-confgen.obj"	"$(INTDIR)\rndc-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/rndcconfgen.mak.in

@@ -0,0 +1,336 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on confgen.dsp
+!IF "$(CFG)" == ""
+CFG=rndcconfgen - @PLATFORM@ Debug
+!MESSAGE No configuration specified. Defaulting to rndcconfgen - @PLATFORM@ Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "rndcconfgen - @PLATFORM@ Release" && "$(CFG)" != "rndcconfgen - @PLATFORM@ Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+ALL : "..\..\..\Build\Release\rndc-confgen.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\rndc-confgen.obj"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\rndc-confgen.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\confgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rndc-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\rndc-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Release\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "..\..\..\Build\Debug\rndc-confgen.exe" "$(OUTDIR)\confgen.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\os.sbr"
+	-@erase "$(INTDIR)\rndc-confgen.obj"
+	-@erase "$(INTDIR)\rndc-confgen.sbr"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\keygen.sbr"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\util.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\confgen.bsc"
+	-@erase "$(OUTDIR)\rndc-confgen.pdb"
+	-@erase "..\..\..\Build\Debug\rndc-confgen.exe"
+	-@erase "..\..\..\Build\Debug\rndc-confgen.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\os.sbr" \
+	"$(INTDIR)\rndc-confgen.sbr" \
+	"$(INTDIR)\keygen.sbr" \
+	"$(INTDIR)\util.sbr"
+
+"$(OUTDIR)\confgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\rndc-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\rndc-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Debug\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("confgen.dep")
+!INCLUDE "confgen.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "confgen.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "rndcconfgen - @PLATFORM@ Release" || "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
+SOURCE=.\os.c
+
+!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
+
+
+!ENDIF 
+
+SOURCE="..\rndc-confgen.c"
+
+!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\rndc-confgen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\rndc-confgen.obj"	"$(INTDIR)\rndc-confgen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\keygen.c
+
+!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\util.c
+
+!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
+
+
+"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/confgen/win32/rndcconfgen.vcxproj.filters.in

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\rndc-confgen.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

bin/confgen/win32/rndcconfgen.vcxproj.in

@@ -0,0 +1,110 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|@PLATFORM@">
+      <Configuration>Debug</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|@PLATFORM@">
+      <Configuration>Release</Configuration>
+      <Platform>@PLATFORM@</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{1E2C1635-3093-4D59-80E7-4743AC10F22F}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>rndcconfgen</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <LinkIncremental>true</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>rndc-confgen</TargetName>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
+    <IntDir>.\$(Configuration)\</IntDir>
+    <TargetName>rndc-confgen</TargetName>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
+    <ClCompile>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>Level3</WarningLevel>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <BrowseInformation>true</BrowseInformation>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <Optimization>MaxSpeed</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+      <StringPooling>true</StringPooling>
+      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
+      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
+      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>false</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
+      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
+      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\rndc-confgen.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

bin/confgen/win32/rndcconfgen.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

bin/delv/.gitignore

@@ -0,0 +1 @@
+/delv

bin/delv/Makefile.in

@@ -0,0 +1,78 @@
+# Copyright (C) 2014-2016  Internet Systems Consortium, Inc. ("ISC")
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+srcdir =	@srcdir@
+VPATH =		@srcdir@
+top_srcdir =	@top_srcdir@
+
+VERSION=@BIND9_VERSION@
+
+@BIND9_MAKE_INCLUDES@
+
+CINCLUDES =	-I${srcdir}/include ${DNS_INCLUDES} ${ISC_INCLUDES} \
+		@DST_OPENSSL_INC@ ${IRS_INCLUDES} ${ISCCFG_INCLUDES}
+
+CDEFINES =	@CRYPTO@ -DVERSION=\"${VERSION}\" \
+		-DSYSCONFDIR=\"${sysconfdir}\"
+CWARNINGS =
+
+ISCCFGLIBS =	../../lib/isccfg/libisccfg.@A@
+DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
+ISCNOSYMLIBS =	../../lib/isc/libisc-nosymtbl.@A@
+ISCLIBS =	../../lib/isc/libisc.@A@
+IRSLIBS =	../../lib/irs/libirs.@A@
+
+ISCCFGDEPLIBS =	../../lib/isccfg/libisccfg.@A@
+DNSDEPLIBS =	../../lib/dns/libdns.@A@
+ISCDEPLIBS =	../../lib/isc/libisc.@A@
+IRSDEPLIBS =	../../lib/irs/libirs.@A@
+
+DEPLIBS =	${DNSDEPLIBS} ${IRSDEPLIBS} ${ISCCFGDEPLIBS} ${ISCDEPLIBS}
+
+LIBS =		${DNSLIBS} ${IRSLIBS} ${ISCCFGLIBS} ${ISCLIBS} @LIBS@
+NOSYMLIBS =	${DNSLIBS} ${IRSLIBS} ${ISCCFGLIBS} ${ISCNOSYMLIBS} @LIBS@
+
+SUBDIRS =
+
+TARGETS =	delv@EXEEXT@
+
+OBJS =		delv.@O@
+
+SRCS =		delv.c
+
+MANPAGES =	delv.1
+
+HTMLPAGES =	delv.html
+
+MANOBJS =	${MANPAGES} ${HTMLPAGES}
+
+@BIND9_MAKE_RULES@
+
+delv@EXEEXT@: delv.@O@ ${DEPLIBS}
+	export BASEOBJS="delv.@O@"; \
+	export LIBS0="${DNSLIBS}"; \
+	${FINALBUILDCMD}
+
+installdirs:
+	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${bindir}
+	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man1
+
+install:: delv@EXEEXT@ installdirs
+	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} \
+		delv@EXEEXT@ ${DESTDIR}${bindir}
+	${INSTALL_DATA} ${srcdir}/delv.1 ${DESTDIR}${mandir}/man1
+
+uninstall::
+	rm -f ${DESTDIR}${mandir}/man1/delv.1
+	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${bindir}/delv@EXEEXT@
+
+doc man:: ${MANOBJS}
+
+docclean manclean maintainer-clean::
+	rm -f ${MANOBJS}
+
+clean distclean maintainer-clean::
+	rm -f ${TARGETS}

bin/delv/delv.1

@@ -0,0 +1,441 @@
+.\" Copyright (C) 2014-2016 Internet Systems Consortium, Inc. ("ISC")
+.\" 
+.\" This Source Code Form is subject to the terms of the Mozilla Public
+.\" License, v. 2.0. If a copy of the MPL was not distributed with this
+.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
+.\"
+.hy 0
+.ad l
+'\" t
+.\"     Title: delv
+.\"    Author: 
+.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
+.\"      Date: 2014-04-23
+.\"    Manual: BIND9
+.\"    Source: ISC
+.\"  Language: English
+.\"
+.TH "DELV" "1" "2014\-04\-23" "ISC" "BIND9"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+delv \- DNS lookup and validation utility
+.SH "SYNOPSIS"
+.HP \w'\fBdelv\fR\ 'u
+\fBdelv\fR [@server] [\fB\-4\fR] [\fB\-6\fR] [\fB\-a\ \fR\fB\fIanchor\-file\fR\fR] [\fB\-b\ \fR\fB\fIaddress\fR\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-d\ \fR\fB\fIlevel\fR\fR] [\fB\-i\fR] [\fB\-m\fR] [\fB\-p\ \fR\fB\fIport#\fR\fR] [\fB\-q\ \fR\fB\fIname\fR\fR] [\fB\-t\ \fR\fB\fItype\fR\fR] [\fB\-x\ \fR\fB\fIaddr\fR\fR] [name] [type] [class] [queryopt...]
+.HP \w'\fBdelv\fR\ 'u
+\fBdelv\fR [\fB\-h\fR]
+.HP \w'\fBdelv\fR\ 'u
+\fBdelv\fR [\fB\-v\fR]
+.HP \w'\fBdelv\fR\ 'u
+\fBdelv\fR [queryopt...] [query...]
+.SH "DESCRIPTION"
+.PP
+\fBdelv\fR
+(Domain Entity Lookup & Validation) is a tool for sending DNS queries and validating the results, using the same internal resolver and validator logic as
+\fBnamed\fR\&.
+.PP
+\fBdelv\fR
+will send to a specified name server all queries needed to fetch and validate the requested data; this includes the original requested query, subsequent queries to follow CNAME or DNAME chains, and queries for DNSKEY, DS and DLV records to establish a chain of trust for DNSSEC validation\&. It does not perform iterative resolution, but simulates the behavior of a name server configured for DNSSEC validating and forwarding\&.
+.PP
+By default, responses are validated using built\-in DNSSEC trust anchors for the root zone ("\&.") and for the ISC DNSSEC lookaside validation zone ("dlv\&.isc\&.org")\&. Records returned by
+\fBdelv\fR
+are either fully validated or were not signed\&. If validation fails, an explanation of the failure is included in the output; the validation process can be traced in detail\&. Because
+\fBdelv\fR
+does not rely on an external server to carry out validation, it can be used to check the validity of DNS responses in environments where local name servers may not be trustworthy\&.
+.PP
+Unless it is told to query a specific name server,
+\fBdelv\fR
+will try each of the servers listed in
+/etc/resolv\&.conf\&. If no usable server addresses are found,
+\fBdelv\fR
+will send queries to the localhost addresses (127\&.0\&.0\&.1 for IPv4, ::1 for IPv6)\&.
+.PP
+When no command line arguments or options are given,
+\fBdelv\fR
+will perform an NS query for "\&." (the root zone)\&.
+.SH "SIMPLE USAGE"
+.PP
+A typical invocation of
+\fBdelv\fR
+looks like:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+ delv @server name type 
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+where:
+.PP
+\fBserver\fR
+.RS 4
+is the name or IP address of the name server to query\&. This can be an IPv4 address in dotted\-decimal notation or an IPv6 address in colon\-delimited notation\&. When the supplied
+\fIserver\fR
+argument is a hostname,
+\fBdelv\fR
+resolves that name before querying that name server (note, however, that this initial lookup is
+\fInot\fR
+validated by DNSSEC)\&.
+.sp
+If no
+\fIserver\fR
+argument is provided,
+\fBdelv\fR
+consults
+/etc/resolv\&.conf; if an address is found there, it queries the name server at that address\&. If either of the
+\fB\-4\fR
+or
+\fB\-6\fR
+options are in use, then only addresses for the corresponding transport will be tried\&. If no usable addresses are found,
+\fBdelv\fR
+will send queries to the localhost addresses (127\&.0\&.0\&.1 for IPv4, ::1 for IPv6)\&.
+.RE
+.PP
+\fBname\fR
+.RS 4
+is the domain name to be looked up\&.
+.RE
+.PP
+\fBtype\fR
+.RS 4
+indicates what type of query is required \(em ANY, A, MX, etc\&.
+\fItype\fR
+can be any valid query type\&. If no
+\fItype\fR
+argument is supplied,
+\fBdelv\fR
+will perform a lookup for an A record\&.
+.RE
+.SH "OPTIONS"
+.PP
+\-a \fIanchor\-file\fR
+.RS 4
+Specifies a file from which to read DNSSEC trust anchors\&. The default is
+/etc/bind\&.keys, which is included with
+BIND
+9 and contains trust anchors for the root zone ("\&.") and for the ISC DNSSEC lookaside validation zone ("dlv\&.isc\&.org")\&.
+.sp
+Keys that do not match the root or DLV trust\-anchor names are ignored; these key names can be overridden using the
+\fB+dlv=NAME\fR
+or
+\fB+root=NAME\fR
+options\&.
+.sp
+Note: When reading the trust anchor file,
+\fBdelv\fR
+treats
+\fBmanaged\-keys\fR
+statements and
+\fBtrusted\-keys\fR
+statements identically\&. That is, for a managed key, it is the
+\fIinitial\fR
+key that is trusted; RFC 5011 key management is not supported\&.
+\fBdelv\fR
+will not consult the managed\-keys database maintained by
+\fBnamed\fR\&. This means that if either of the keys in
+/etc/bind\&.keys
+is revoked and rolled over, it will be necessary to update
+/etc/bind\&.keys
+to use DNSSEC validation in
+\fBdelv\fR\&.
+.RE
+.PP
+\-b \fIaddress\fR
+.RS 4
+Sets the source IP address of the query to
+\fIaddress\fR\&. This must be a valid address on one of the host\*(Aqs network interfaces or "0\&.0\&.0\&.0" or "::"\&. An optional source port may be specified by appending "#<port>"
+.RE
+.PP
+\-c \fIclass\fR
+.RS 4
+Sets the query class for the requested data\&. Currently, only class "IN" is supported in
+\fBdelv\fR
+and any other value is ignored\&.
+.RE
+.PP
+\-d \fIlevel\fR
+.RS 4
+Set the systemwide debug level to
+\fBlevel\fR\&. The allowed range is from 0 to 99\&. The default is 0 (no debugging)\&. Debugging traces from
+\fBdelv\fR
+become more verbose as the debug level increases\&. See the
+\fB+mtrace\fR,
+\fB+rtrace\fR, and
+\fB+vtrace\fR
+options below for additional debugging details\&.
+.RE
+.PP
+\-h
+.RS 4
+Display the
+\fBdelv\fR
+help usage output and exit\&.
+.RE
+.PP
+\-i
+.RS 4
+Insecure mode\&. This disables internal DNSSEC validation\&. (Note, however, this does not set the CD bit on upstream queries\&. If the server being queried is performing DNSSEC validation, then it will not return invalid data; this can cause
+\fBdelv\fR
+to time out\&. When it is necessary to examine invalid data to debug a DNSSEC problem, use
+\fBdig +cd\fR\&.)
+.RE
+.PP
+\-m
+.RS 4
+Enables memory usage debugging\&.
+.RE
+.PP
+\-p \fIport#\fR
+.RS 4
+Specifies a destination port to use for queries instead of the standard DNS port number 53\&. This option would be used with a name server that has been configured to listen for queries on a non\-standard port number\&.
+.RE
+.PP
+\-q \fIname\fR
+.RS 4
+Sets the query name to
+\fIname\fR\&. While the query name can be specified without using the
+\fB\-q\fR, it is sometimes necessary to disambiguate names from types or classes (for example, when looking up the name "ns", which could be misinterpreted as the type NS, or "ch", which could be misinterpreted as class CH)\&.
+.RE
+.PP
+\-t \fItype\fR
+.RS 4
+Sets the query type to
+\fItype\fR, which can be any valid query type supported in BIND 9 except for zone transfer types AXFR and IXFR\&. As with
+\fB\-q\fR, this is useful to distinguish query name type or class when they are ambiguous\&. it is sometimes necessary to disambiguate names from types\&.
+.sp
+The default query type is "A", unless the
+\fB\-x\fR
+option is supplied to indicate a reverse lookup, in which case it is "PTR"\&.
+.RE
+.PP
+\-v
+.RS 4
+Print the
+\fBdelv\fR
+version and exit\&.
+.RE
+.PP
+\-x \fIaddr\fR
+.RS 4
+Performs a reverse lookup, mapping an addresses to a name\&.
+\fIaddr\fR
+is an IPv4 address in dotted\-decimal notation, or a colon\-delimited IPv6 address\&. When
+\fB\-x\fR
+is used, there is no need to provide the
+\fIname\fR
+or
+\fItype\fR
+arguments\&.
+\fBdelv\fR
+automatically performs a lookup for a name like
+11\&.12\&.13\&.10\&.in\-addr\&.arpa
+and sets the query type to PTR\&. IPv6 addresses are looked up using nibble format under the IP6\&.ARPA domain\&.
+.RE
+.PP
+\-4
+.RS 4
+Forces
+\fBdelv\fR
+to only use IPv4\&.
+.RE
+.PP
+\-6
+.RS 4
+Forces
+\fBdelv\fR
+to only use IPv6\&.
+.RE
+.SH "QUERY OPTIONS"
+.PP
+\fBdelv\fR
+provides a number of query options which affect the way results are displayed, and in some cases the way lookups are performed\&.
+.PP
+Each query option is identified by a keyword preceded by a plus sign (+)\&. Some keywords set or reset an option\&. These may be preceded by the string
+no
+to negate the meaning of that keyword\&. Other keywords assign values to options like the timeout interval\&. They have the form
+\fB+keyword=value\fR\&. The query options are:
+.PP
+\fB+[no]cdflag\fR
+.RS 4
+Controls whether to set the CD (checking disabled) bit in queries sent by
+\fBdelv\fR\&. This may be useful when troubleshooting DNSSEC problems from behind a validating resolver\&. A validating resolver will block invalid responses, making it difficult to retrieve them for analysis\&. Setting the CD flag on queries will cause the resolver to return invalid responses, which
+\fBdelv\fR
+can then validate internally and report the errors in detail\&.
+.RE
+.PP
+\fB+[no]class\fR
+.RS 4
+Controls whether to display the CLASS when printing a record\&. The default is to display the CLASS\&.
+.RE
+.PP
+\fB+[no]ttl\fR
+.RS 4
+Controls whether to display the TTL when printing a record\&. The default is to display the TTL\&.
+.RE
+.PP
+\fB+[no]rtrace\fR
+.RS 4
+Toggle resolver fetch logging\&. This reports the name and type of each query sent by
+\fBdelv\fR
+in the process of carrying out the resolution and validation process: this includes including the original query and all subsequent queries to follow CNAMEs and to establish a chain of trust for DNSSEC validation\&.
+.sp
+This is equivalent to setting the debug level to 1 in the "resolver" logging category\&. Setting the systemwide debug level to 1 using the
+\fB\-d\fR
+option will product the same output (but will affect other logging categories as well)\&.
+.RE
+.PP
+\fB+[no]mtrace\fR
+.RS 4
+Toggle message logging\&. This produces a detailed dump of the responses received by
+\fBdelv\fR
+in the process of carrying out the resolution and validation process\&.
+.sp
+This is equivalent to setting the debug level to 10 for the "packets" module of the "resolver" logging category\&. Setting the systemwide debug level to 10 using the
+\fB\-d\fR
+option will produce the same output (but will affect other logging categories as well)\&.
+.RE
+.PP
+\fB+[no]vtrace\fR
+.RS 4
+Toggle validation logging\&. This shows the internal process of the validator as it determines whether an answer is validly signed, unsigned, or invalid\&.
+.sp
+This is equivalent to setting the debug level to 3 for the "validator" module of the "dnssec" logging category\&. Setting the systemwide debug level to 3 using the
+\fB\-d\fR
+option will produce the same output (but will affect other logging categories as well)\&.
+.RE
+.PP
+\fB+[no]short\fR
+.RS 4
+Provide a terse answer\&. The default is to print the answer in a verbose form\&.
+.RE
+.PP
+\fB+[no]comments\fR
+.RS 4
+Toggle the display of comment lines in the output\&. The default is to print comments\&.
+.RE
+.PP
+\fB+[no]rrcomments\fR
+.RS 4
+Toggle the display of per\-record comments in the output (for example, human\-readable key information about DNSKEY records)\&. The default is to print per\-record comments\&.
+.RE
+.PP
+\fB+[no]crypto\fR
+.RS 4
+Toggle the display of cryptographic fields in DNSSEC records\&. The contents of these field are unnecessary to debug most DNSSEC validation failures and removing them makes it easier to see the common failures\&. The default is to display the fields\&. When omitted they are replaced by the string "[omitted]" or in the DNSKEY case the key id is displayed as the replacement, e\&.g\&. "[ key id = value ]"\&.
+.RE
+.PP
+\fB+[no]trust\fR
+.RS 4
+Controls whether to display the trust level when printing a record\&. The default is to display the trust level\&.
+.RE
+.PP
+\fB+[no]split[=W]\fR
+.RS 4
+Split long hex\- or base64\-formatted fields in resource records into chunks of
+\fIW\fR
+characters (where
+\fIW\fR
+is rounded up to the nearest multiple of 4)\&.
+\fI+nosplit\fR
+or
+\fI+split=0\fR
+causes fields not to be split at all\&. The default is 56 characters, or 44 characters when multiline mode is active\&.
+.RE
+.PP
+\fB+[no]all\fR
+.RS 4
+Set or clear the display options
+\fB+[no]comments\fR,
+\fB+[no]rrcomments\fR, and
+\fB+[no]trust\fR
+as a group\&.
+.RE
+.PP
+\fB+[no]multiline\fR
+.RS 4
+Print long records (such as RRSIG, DNSKEY, and SOA records) in a verbose multi\-line format with human\-readable comments\&. The default is to print each record on a single line, to facilitate machine parsing of the
+\fBdelv\fR
+output\&.
+.RE
+.PP
+\fB+[no]dnssec\fR
+.RS 4
+Indicates whether to display RRSIG records in the
+\fBdelv\fR
+output\&. The default is to do so\&. Note that (unlike in
+\fBdig\fR) this does
+\fInot\fR
+control whether to request DNSSEC records or whether to validate them\&. DNSSEC records are always requested, and validation will always occur unless suppressed by the use of
+\fB\-i\fR
+or
+\fB+noroot\fR
+and
+\fB+nodlv\fR\&.
+.RE
+.PP
+\fB+[no]root[=ROOT]\fR
+.RS 4
+Indicates whether to perform conventional (non\-lookaside) DNSSEC validation, and if so, specifies the name of a trust anchor\&. The default is to validate using a trust anchor of "\&." (the root zone), for which there is a built\-in key\&. If specifying a different trust anchor, then
+\fB\-a\fR
+must be used to specify a file containing the key\&.
+.RE
+.PP
+\fB+[no]dlv[=DLV]\fR
+.RS 4
+Indicates whether to perform DNSSEC lookaside validation, and if so, specifies the name of the DLV trust anchor\&. The default is to perform lookaside validation using a trust anchor of "dlv\&.isc\&.org", for which there is a built\-in key\&. If specifying a different name, then
+\fB\-a\fR
+must be used to specify a file containing the DLV key\&.
+.RE
+.PP
+\fB+[no]tcp\fR
+.RS 4
+Controls whether to use TCP when sending queries\&. The default is to use UDP unless a truncated response has been received\&.
+.RE
+.PP
+\fB+[no]unknownformat\fR
+.RS 4
+Print all RDATA in unknown RR type presentation format (RFC 3597)\&. The default is to print RDATA for known types in the type\*(Aqs presentation format\&.
+.RE
+.SH "FILES"
+.PP
+/etc/bind\&.keys
+.PP
+/etc/resolv\&.conf
+.SH "SEE ALSO"
+.PP
+\fBdig\fR(1),
+\fBnamed\fR(8),
+RFC4034,
+RFC4035,
+RFC4431,
+RFC5074,
+RFC5155\&.
+.SH "AUTHOR"
+.PP
+\fBInternet Systems Consortium, Inc\&.\fR
+.SH "COPYRIGHT"
+.br
+Copyright \(co 2014-2016 Internet Systems Consortium, Inc. ("ISC")
+.br

bin/delv/delv.docbook

@@ -0,0 +1,696 @@
+<!DOCTYPE book [
+<!ENTITY mdash "&#8212;">]>
+<!--
+ - Copyright (C) 2014-2016  Internet Systems Consortium, Inc. ("ISC")
+ -
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
+-->
+
+<!-- Converted by db4-upgrade version 1.0 -->
+<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.delv">
+  <info>
+    <date>2014-04-23</date>
+  </info>
+  <refentryinfo>
+    <corpname>ISC</corpname>
+    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+  </refentryinfo>
+
+  <refmeta>
+    <refentrytitle>delv</refentrytitle>
+    <manvolnum>1</manvolnum>
+    <refmiscinfo>BIND9</refmiscinfo>
+  </refmeta>
+
+  <refnamediv>
+    <refname>delv</refname>
+    <refpurpose>DNS lookup and validation utility</refpurpose>
+  </refnamediv>
+
+  <docinfo>
+    <copyright>
+      <year>2014</year>
+      <year>2015</year>
+      <year>2016</year>
+      <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
+    </copyright>
+  </docinfo>
+
+  <refsynopsisdiv>
+    <cmdsynopsis sepchar=" ">
+      <command>delv</command>
+      <arg choice="opt" rep="norepeat">@server</arg>
+      <arg choice="opt" rep="norepeat"><option>-4</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-6</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">anchor-file</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-b <replaceable class="parameter">address</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-d <replaceable class="parameter">level</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-i</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-m</option></arg>
+      <arg choice="opt" rep="norepeat"><option>-p <replaceable class="parameter">port#</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-q <replaceable class="parameter">name</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">type</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat"><option>-x <replaceable class="parameter">addr</replaceable></option></arg>
+      <arg choice="opt" rep="norepeat">name</arg>
+      <arg choice="opt" rep="norepeat">type</arg>
+      <arg choice="opt" rep="norepeat">class</arg>
+      <arg choice="opt" rep="repeat">queryopt</arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis sepchar=" ">
+      <command>delv</command>
+      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis sepchar=" ">
+      <command>delv</command>
+      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis sepchar=" ">
+      <command>delv</command>
+      <arg choice="opt" rep="repeat">queryopt</arg>
+      <arg choice="opt" rep="repeat">query</arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+  <refsection><info><title>DESCRIPTION</title></info>
+
+    <para><command>delv</command>
+      (Domain Entity Lookup &amp; Validation) is a tool for sending
+      DNS queries and validating the results, using the same internal
+      resolver and validator logic as <command>named</command>.
+    </para>
+    <para>
+      <command>delv</command> will send to a specified name server all
+      queries needed to fetch and validate the requested data; this
+      includes the original requested query, subsequent queries to follow
+      CNAME or DNAME chains, and queries for DNSKEY, DS and DLV records
+      to establish a chain of trust for DNSSEC validation.
+      It does not perform iterative resolution, but simulates the
+      behavior of a name server configured for DNSSEC validating and
+      forwarding.
+    </para>
+    <para>
+      By default, responses are validated using built-in DNSSEC trust
+      anchors for the root zone (".") and for the ISC DNSSEC lookaside
+      validation zone ("dlv.isc.org").  Records returned by
+      <command>delv</command> are either fully validated or
+      were not signed.  If validation fails, an explanation of
+      the failure is included in the output; the validation process
+      can be traced in detail.  Because <command>delv</command> does
+      not rely on an external server to carry out validation, it can
+      be used to check the validity of DNS responses in environments
+      where local name servers may not be trustworthy.
+    </para>
+    <para>
+      Unless it is told to query a specific name server,
+      <command>delv</command> will try each of the servers listed in
+      <filename>/etc/resolv.conf</filename>. If no usable server
+      addresses are found, <command>delv</command> will send
+      queries to the localhost addresses (127.0.0.1 for IPv4, ::1
+      for IPv6).
+    </para>
+    <para>
+      When no command line arguments or options are given,
+      <command>delv</command> will perform an NS query for "."
+      (the root zone).
+    </para>
+  </refsection>
+
+  <refsection><info><title>SIMPLE USAGE</title></info>
+
+
+    <para>
+      A typical invocation of <command>delv</command> looks like:
+      <programlisting> delv @server name type </programlisting>
+      where:
+
+      <variablelist>
+	<varlistentry>
+	  <term><constant>server</constant></term>
+	  <listitem>
+	    <para>
+	      is the name or IP address of the name server to query.  This
+	      can be an IPv4 address in dotted-decimal notation or an IPv6
+	      address in colon-delimited notation.  When the supplied
+	      <parameter>server</parameter> argument is a hostname,
+	      <command>delv</command> resolves that name before
+	      querying that name server (note, however, that this
+	      initial lookup is <emphasis>not</emphasis> validated
+	      by DNSSEC).
+	    </para>
+	    <para>
+	      If no <parameter>server</parameter> argument is
+	      provided, <command>delv</command> consults
+	      <filename>/etc/resolv.conf</filename>; if an
+	      address is found there, it queries the name server at
+	      that address. If either of the <option>-4</option> or
+	      <option>-6</option> options are in use, then
+	      only addresses for the corresponding transport
+	      will be tried.  If no usable addresses are found,
+	      <command>delv</command> will send queries to
+	      the localhost addresses (127.0.0.1 for IPv4,
+	      ::1 for IPv6).
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><constant>name</constant></term>
+	  <listitem>
+	    <para>
+	      is the domain name to be looked up.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><constant>type</constant></term>
+	  <listitem>
+	    <para>
+	      indicates what type of query is required &mdash;
+	      ANY, A, MX, etc.
+	      <parameter>type</parameter> can be any valid query
+	      type.  If no
+	      <parameter>type</parameter> argument is supplied,
+	      <command>delv</command> will perform a lookup for an
+	      A record.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+      </variablelist>
+    </para>
+
+  </refsection>
+
+  <refsection><info><title>OPTIONS</title></info>
+
+    <variablelist>
+
+      <varlistentry>
+	<term>-a <replaceable class="parameter">anchor-file</replaceable></term>
+	<listitem>
+	  <para>
+	    Specifies a file from which to read DNSSEC trust anchors.
+	    The default is <filename>/etc/bind.keys</filename>, which
+	    is included with <acronym>BIND</acronym> 9 and contains
+	    trust anchors for the root zone (".") and for the ISC
+	    DNSSEC lookaside validation zone ("dlv.isc.org").
+	  </para>
+	  <para>
+	    Keys that do not match the root or DLV trust-anchor
+	    names are ignored; these key names can be overridden
+	    using the <option>+dlv=NAME</option> or
+	    <option>+root=NAME</option> options.
+	  </para>
+	  <para>
+	    Note: When reading the trust anchor file,
+	    <command>delv</command> treats <option>managed-keys</option>
+	    statements and <option>trusted-keys</option> statements
+	    identically.  That is, for a managed key, it is the
+	    <emphasis>initial</emphasis> key that is trusted; RFC 5011
+	    key management is not supported. <command>delv</command>
+	    will not consult the managed-keys database maintained by
+	    <command>named</command>. This means that if either of the
+	    keys in <filename>/etc/bind.keys</filename> is revoked
+	    and rolled over, it will be necessary to update
+	    <filename>/etc/bind.keys</filename> to use DNSSEC
+	    validation in <command>delv</command>.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-b  <replaceable class="parameter">address</replaceable></term>
+	<listitem>
+	  <para>
+	    Sets the source IP address of the query to
+	    <parameter>address</parameter>.  This must be a valid address
+	    on one of the host's network interfaces or "0.0.0.0" or "::".
+	    An optional source port may be specified by appending
+	    "#&lt;port&gt;"
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-c <replaceable class="parameter">class</replaceable></term>
+	<listitem>
+	  <para>
+	    Sets the query class for the requested data. Currently,
+	    only class "IN" is supported in <command>delv</command>
+	    and any other value is ignored.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-d <replaceable class="parameter">level</replaceable></term>
+	<listitem>
+	  <para>
+	    Set the systemwide debug level to <option>level</option>.
+	    The allowed range is from 0 to 99.
+	    The default is 0 (no debugging).
+	    Debugging traces from <command>delv</command> become
+	    more verbose as the debug level increases.
+	    See the <option>+mtrace</option>, <option>+rtrace</option>,
+	    and <option>+vtrace</option> options below for additional
+	    debugging details.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-h</term>
+	<listitem>
+	  <para>
+	    Display the <command>delv</command> help usage output and exit.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-i</term>
+	<listitem>
+	  <para>
+	    Insecure mode. This disables internal DNSSEC validation.
+	    (Note, however, this does not set the CD bit on upstream
+	    queries. If the server being queried is performing DNSSEC
+	    validation, then it will not return invalid data; this
+	    can cause <command>delv</command> to time out. When it
+	    is necessary to examine invalid data to debug a DNSSEC
+	    problem, use <command>dig +cd</command>.)
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-m</term>
+	<listitem>
+	  <para>
+	    Enables memory usage debugging.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-p <replaceable class="parameter">port#</replaceable></term>
+	<listitem>
+	  <para>
+	    Specifies a destination port to use for queries instead of
+	    the standard DNS port number 53.  This option would be used
+	    with a name server that has been configured to listen
+	    for queries on a non-standard port number.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-q <replaceable class="parameter">name</replaceable></term>
+	<listitem>
+	  <para>
+	    Sets the query name to <parameter>name</parameter>.
+	    While the query name can be specified without using the
+	    <option>-q</option>, it is sometimes necessary to disambiguate
+	    names from types or classes (for example, when looking up the
+	    name "ns", which could be misinterpreted as the type NS,
+	    or "ch", which could be misinterpreted as class CH).
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-t <replaceable class="parameter">type</replaceable></term>
+	<listitem>
+	  <para>
+	    Sets the query type to <parameter>type</parameter>, which
+	    can be any valid query type supported in BIND 9 except
+	    for zone transfer types AXFR and IXFR. As with
+	    <option>-q</option>, this is useful to distinguish
+	    query name type or class when they are ambiguous.
+	    it is sometimes necessary to disambiguate names from types.
+	  </para>
+	  <para>
+	    The default query type is "A", unless the <option>-x</option>
+	    option is supplied to indicate a reverse lookup, in which case
+	    it is "PTR".
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-v</term>
+	<listitem>
+	  <para>
+	    Print the <command>delv</command> version and exit.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-x <replaceable class="parameter">addr</replaceable></term>
+	<listitem>
+	  <para>
+	    Performs a reverse lookup, mapping an addresses to
+	    a name.  <parameter>addr</parameter> is an IPv4 address in
+	    dotted-decimal notation, or a colon-delimited IPv6 address.
+	    When <option>-x</option> is used, there is no need to provide
+	    the <parameter>name</parameter> or <parameter>type</parameter>
+	    arguments.  <command>delv</command> automatically performs a
+	    lookup for a name like <literal>11.12.13.10.in-addr.arpa</literal>
+	    and sets the query type to PTR.  IPv6 addresses are looked up
+	    using nibble format under the IP6.ARPA domain.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-4</term>
+	<listitem>
+	  <para>
+	    Forces <command>delv</command> to only use IPv4.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-6</term>
+	<listitem>
+	  <para>
+	    Forces <command>delv</command> to only use IPv6.
+	  </para>
+	</listitem>
+      </varlistentry>
+
+    </variablelist>
+  </refsection>
+
+  <refsection><info><title>QUERY OPTIONS</title></info>
+
+
+    <para><command>delv</command>
+      provides a number of query options which affect the way results are
+      displayed, and in some cases the way lookups are performed.
+    </para>
+
+    <para>
+      Each query option is identified by a keyword preceded by a plus sign
+      (<literal>+</literal>).  Some keywords set or reset an
+      option.  These may be preceded by the string
+      <literal>no</literal> to negate the meaning of that keyword.
+      Other keywords assign values to options like the timeout interval.
+      They have the form <option>+keyword=value</option>.
+      The query options are:
+
+      <variablelist>
+	<varlistentry>
+	  <term><option>+[no]cdflag</option></term>
+	  <listitem>
+	    <para>
+	      Controls whether to set the CD (checking disabled) bit in
+	      queries sent by <command>delv</command>. This may be useful
+	      when troubleshooting DNSSEC problems from behind a validating
+	      resolver. A validating resolver will block invalid responses,
+	      making it difficult to retrieve them for analysis. Setting
+	      the CD flag on queries will cause the resolver to return
+	      invalid responses, which <command>delv</command> can then
+	      validate internally and report the errors in detail.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]class</option></term>
+	  <listitem>
+	    <para>
+	      Controls whether to display the CLASS when printing
+	      a record. The default is to display the CLASS.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]ttl</option></term>
+	  <listitem>
+	    <para>
+	      Controls whether to display the TTL when printing
+	      a record. The default is to display the TTL.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]rtrace</option></term>
+	  <listitem>
+	    <para>
+	      Toggle resolver fetch logging. This reports the
+	      name and type of each query sent by <command>delv</command>
+	      in the process of carrying out the resolution and validation
+	      process: this includes including the original query and
+	      all subsequent queries to follow CNAMEs and to establish a
+	      chain of trust for DNSSEC validation.
+	    </para>
+	    <para>
+	      This is equivalent to setting the debug level to 1 in
+	      the "resolver" logging category. Setting the systemwide
+	      debug level to 1 using the <option>-d</option> option will
+	      product the same output (but will affect other logging
+	      categories as well).
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]mtrace</option></term>
+	  <listitem>
+	    <para>
+	      Toggle message logging. This produces a detailed dump of
+	      the responses received by <command>delv</command> in the
+	      process of carrying out the resolution and validation process.
+	    </para>
+	    <para>
+	      This is equivalent to setting the debug level to 10
+	      for the "packets" module of the "resolver" logging
+	      category. Setting the systemwide debug level to 10 using
+	      the <option>-d</option> option will produce the same output
+	      (but will affect other logging categories as well).
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]vtrace</option></term>
+	  <listitem>
+	    <para>
+	      Toggle validation logging. This shows the internal
+	      process of the validator as it determines whether an
+	      answer is validly signed, unsigned, or invalid.
+	    </para>
+	    <para>
+	      This is equivalent to setting the debug level to 3
+	      for the "validator" module of the "dnssec" logging
+	      category. Setting the systemwide debug level to 3 using
+	      the <option>-d</option> option will produce the same output
+	      (but will affect other logging categories as well).
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]short</option></term>
+	  <listitem>
+	    <para>
+	      Provide a terse answer.  The default is to print the answer in a
+	      verbose form.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]comments</option></term>
+	  <listitem>
+	    <para>
+	      Toggle the display of comment lines in the output.  The default
+	      is to print comments.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]rrcomments</option></term>
+	  <listitem>
+	    <para>
+	      Toggle the display of per-record comments in the output (for
+	      example, human-readable key information about DNSKEY records).
+	      The default is to print per-record comments.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]crypto</option></term>
+	  <listitem>
+	    <para>
+	      Toggle the display of cryptographic fields in DNSSEC records.
+	      The contents of these field are unnecessary to debug most DNSSEC
+	      validation failures and removing them makes it easier to see
+	      the common failures.  The default is to display the fields.
+	      When omitted they are replaced by the string "[omitted]" or
+	      in the DNSKEY case the key id is displayed as the replacement,
+	      e.g. "[ key id = value ]".
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]trust</option></term>
+	  <listitem>
+	    <para>
+	      Controls whether to display the trust level when printing
+	      a record. The default is to display the trust level.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]split[=W]</option></term>
+	  <listitem>
+	    <para>
+	      Split long hex- or base64-formatted fields in resource
+	      records into chunks of <parameter>W</parameter> characters
+	      (where <parameter>W</parameter> is rounded up to the nearest
+	      multiple of 4).
+	      <parameter>+nosplit</parameter> or
+	      <parameter>+split=0</parameter> causes fields not to be
+	      split at all.  The default is 56 characters, or 44 characters
+	      when multiline mode is active.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]all</option></term>
+	  <listitem>
+	    <para>
+	      Set or clear the display options
+	      <option>+[no]comments</option>,
+	      <option>+[no]rrcomments</option>, and
+	      <option>+[no]trust</option> as a group.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]multiline</option></term>
+	  <listitem>
+	    <para>
+	      Print long records (such as RRSIG, DNSKEY, and SOA records)
+	      in a verbose multi-line format with human-readable comments.
+	      The default is to print each record on a single line, to
+	      facilitate machine parsing of the <command>delv</command>
+	      output.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]dnssec</option></term>
+	  <listitem>
+	    <para>
+	      Indicates whether to display RRSIG records in the
+	      <command>delv</command> output.  The default is to
+	      do so.  Note that (unlike in <command>dig</command>)
+	      this does <emphasis>not</emphasis> control whether to
+	      request DNSSEC records or whether to validate them.
+	      DNSSEC records are always requested, and validation
+	      will always occur unless suppressed by the use of
+	      <option>-i</option> or <option>+noroot</option> and
+	      <option>+nodlv</option>.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]root[=ROOT]</option></term>
+	  <listitem>
+	    <para>
+	      Indicates whether to perform conventional (non-lookaside)
+	      DNSSEC validation, and if so, specifies the
+	      name of a trust anchor.  The default is to validate using
+	      a trust anchor of "." (the root zone), for which there is
+	      a built-in key.  If specifying a different trust anchor,
+	      then <option>-a</option> must be used to specify a file
+	      containing the key.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]dlv[=DLV]</option></term>
+	  <listitem>
+	    <para>
+	      Indicates whether to perform DNSSEC lookaside validation,
+	      and if so, specifies the name of the DLV trust anchor.
+	      The default is to perform lookaside validation using
+	      a trust anchor of "dlv.isc.org", for which there is a
+	      built-in key.  If specifying a different name, then
+	      <option>-a</option> must be used to specify a file
+	      containing the DLV key.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]tcp</option></term>
+	  <listitem>
+	    <para>
+	      Controls whether to use TCP when sending queries.
+	      The default is to use UDP unless a truncated
+	      response has been received.
+	    </para>
+	  </listitem>
+	</varlistentry>
+
+	<varlistentry>
+	  <term><option>+[no]unknownformat</option></term>
+	  <listitem>
+	    <para>
+	      Print all RDATA in unknown RR type presentation format
+	      (RFC 3597). The default is to print RDATA for known types
+	      in the type's presentation format.
+	    </para>
+	  </listitem>
+	</varlistentry>
+      </variablelist>
+
+    </para>
+  </refsection>
+
+  <refsection><info><title>FILES</title></info>
+
+    <para><filename>/etc/bind.keys</filename></para>
+    <para><filename>/etc/resolv.conf</filename></para>
+  </refsection>
+
+  <refsection><info><title>SEE ALSO</title></info>
+
+    <para><citerefentry>
+	<refentrytitle>dig</refentrytitle><manvolnum>1</manvolnum>
+      </citerefentry>,
+      <citerefentry>
+	<refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
+      </citerefentry>,
+      <citetitle>RFC4034</citetitle>,
+      <citetitle>RFC4035</citetitle>,
+      <citetitle>RFC4431</citetitle>,
+      <citetitle>RFC5074</citetitle>,
+      <citetitle>RFC5155</citetitle>.
+    </para>
+  </refsection>
+
+</refentry>

bin/delv/delv.html

@@ -0,0 +1,593 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<!--
+ - Copyright (C) 2014-2016 Internet Systems Consortium, Inc. ("ISC")
+ - 
+ - This Source Code Form is subject to the terms of the Mozilla Public
+ - License, v. 2.0. If a copy of the MPL was not distributed with this
+ - file, You can obtain one at http://mozilla.org/MPL/2.0/.
+-->
+<html lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<title>delv</title>
+<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+</head>
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
+<a name="man.delv"></a><div class="titlepage"></div>
+  
+  
+
+  
+
+  <div class="refnamediv">
+<h2>Name</h2>
+<p>
+    delv
+     &#8212; DNS lookup and validation utility
+  </p>
+</div>
+
+  
+
+  <div class="refsynopsisdiv">
+<h2>Synopsis</h2>
+    <div class="cmdsynopsis"><p>
+      <code class="command">delv</code> 
+       [@server]
+       [<code class="option">-4</code>]
+       [<code class="option">-6</code>]
+       [<code class="option">-a <em class="replaceable"><code>anchor-file</code></em></code>]
+       [<code class="option">-b <em class="replaceable"><code>address</code></em></code>]
+       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
+       [<code class="option">-d <em class="replaceable"><code>level</code></em></code>]
+       [<code class="option">-i</code>]
+       [<code class="option">-m</code>]
+       [<code class="option">-p <em class="replaceable"><code>port#</code></em></code>]
+       [<code class="option">-q <em class="replaceable"><code>name</code></em></code>]
+       [<code class="option">-t <em class="replaceable"><code>type</code></em></code>]
+       [<code class="option">-x <em class="replaceable"><code>addr</code></em></code>]
+       [name]
+       [type]
+       [class]
+       [queryopt...]
+    </p></div>
+
+    <div class="cmdsynopsis"><p>
+      <code class="command">delv</code> 
+       [<code class="option">-h</code>]
+    </p></div>
+
+    <div class="cmdsynopsis"><p>
+      <code class="command">delv</code> 
+       [<code class="option">-v</code>]
+    </p></div>
+
+    <div class="cmdsynopsis"><p>
+      <code class="command">delv</code> 
+       [queryopt...]
+       [query...]
+    </p></div>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.7"></a><h2>DESCRIPTION</h2>
+
+    <p><span class="command"><strong>delv</strong></span>
+      (Domain Entity Lookup &amp; Validation) is a tool for sending
+      DNS queries and validating the results, using the same internal
+      resolver and validator logic as <span class="command"><strong>named</strong></span>.
+    </p>
+    <p>
+      <span class="command"><strong>delv</strong></span> will send to a specified name server all
+      queries needed to fetch and validate the requested data; this
+      includes the original requested query, subsequent queries to follow
+      CNAME or DNAME chains, and queries for DNSKEY, DS and DLV records
+      to establish a chain of trust for DNSSEC validation.
+      It does not perform iterative resolution, but simulates the
+      behavior of a name server configured for DNSSEC validating and
+      forwarding.
+    </p>
+    <p>
+      By default, responses are validated using built-in DNSSEC trust
+      anchors for the root zone (".") and for the ISC DNSSEC lookaside
+      validation zone ("dlv.isc.org").  Records returned by
+      <span class="command"><strong>delv</strong></span> are either fully validated or
+      were not signed.  If validation fails, an explanation of
+      the failure is included in the output; the validation process
+      can be traced in detail.  Because <span class="command"><strong>delv</strong></span> does
+      not rely on an external server to carry out validation, it can
+      be used to check the validity of DNS responses in environments
+      where local name servers may not be trustworthy.
+    </p>
+    <p>
+      Unless it is told to query a specific name server,
+      <span class="command"><strong>delv</strong></span> will try each of the servers listed in
+      <code class="filename">/etc/resolv.conf</code>. If no usable server
+      addresses are found, <span class="command"><strong>delv</strong></span> will send
+      queries to the localhost addresses (127.0.0.1 for IPv4, ::1
+      for IPv6).
+    </p>
+    <p>
+      When no command line arguments or options are given,
+      <span class="command"><strong>delv</strong></span> will perform an NS query for "."
+      (the root zone).
+    </p>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.8"></a><h2>SIMPLE USAGE</h2>
+
+
+    <p>
+      A typical invocation of <span class="command"><strong>delv</strong></span> looks like:
+      </p>
+<pre class="programlisting"> delv @server name type </pre>
+<p>
+      where:
+
+      </p>
+<div class="variablelist"><dl class="variablelist">
+<dt><span class="term"><code class="constant">server</code></span></dt>
+<dd>
+	    <p>
+	      is the name or IP address of the name server to query.  This
+	      can be an IPv4 address in dotted-decimal notation or an IPv6
+	      address in colon-delimited notation.  When the supplied
+	      <em class="parameter"><code>server</code></em> argument is a hostname,
+	      <span class="command"><strong>delv</strong></span> resolves that name before
+	      querying that name server (note, however, that this
+	      initial lookup is <span class="emphasis"><em>not</em></span> validated
+	      by DNSSEC).
+	    </p>
+	    <p>
+	      If no <em class="parameter"><code>server</code></em> argument is
+	      provided, <span class="command"><strong>delv</strong></span> consults
+	      <code class="filename">/etc/resolv.conf</code>; if an
+	      address is found there, it queries the name server at
+	      that address. If either of the <code class="option">-4</code> or
+	      <code class="option">-6</code> options are in use, then
+	      only addresses for the corresponding transport
+	      will be tried.  If no usable addresses are found,
+	      <span class="command"><strong>delv</strong></span> will send queries to
+	      the localhost addresses (127.0.0.1 for IPv4,
+	      ::1 for IPv6).
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="constant">name</code></span></dt>
+<dd>
+	    <p>
+	      is the domain name to be looked up.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="constant">type</code></span></dt>
+<dd>
+	    <p>
+	      indicates what type of query is required &#8212;
+	      ANY, A, MX, etc.
+	      <em class="parameter"><code>type</code></em> can be any valid query
+	      type.  If no
+	      <em class="parameter"><code>type</code></em> argument is supplied,
+	      <span class="command"><strong>delv</strong></span> will perform a lookup for an
+	      A record.
+	    </p>
+	  </dd>
+</dl></div>
+<p>
+    </p>
+
+  </div>
+
+  <div class="refsection">
+<a name="id-1.9"></a><h2>OPTIONS</h2>
+
+    <div class="variablelist"><dl class="variablelist">
+<dt><span class="term">-a <em class="replaceable"><code>anchor-file</code></em></span></dt>
+<dd>
+	  <p>
+	    Specifies a file from which to read DNSSEC trust anchors.
+	    The default is <code class="filename">/etc/bind.keys</code>, which
+	    is included with <acronym class="acronym">BIND</acronym> 9 and contains
+	    trust anchors for the root zone (".") and for the ISC
+	    DNSSEC lookaside validation zone ("dlv.isc.org").
+	  </p>
+	  <p>
+	    Keys that do not match the root or DLV trust-anchor
+	    names are ignored; these key names can be overridden
+	    using the <code class="option">+dlv=NAME</code> or
+	    <code class="option">+root=NAME</code> options.
+	  </p>
+	  <p>
+	    Note: When reading the trust anchor file,
+	    <span class="command"><strong>delv</strong></span> treats <code class="option">managed-keys</code>
+	    statements and <code class="option">trusted-keys</code> statements
+	    identically.  That is, for a managed key, it is the
+	    <span class="emphasis"><em>initial</em></span> key that is trusted; RFC 5011
+	    key management is not supported. <span class="command"><strong>delv</strong></span>
+	    will not consult the managed-keys database maintained by
+	    <span class="command"><strong>named</strong></span>. This means that if either of the
+	    keys in <code class="filename">/etc/bind.keys</code> is revoked
+	    and rolled over, it will be necessary to update
+	    <code class="filename">/etc/bind.keys</code> to use DNSSEC
+	    validation in <span class="command"><strong>delv</strong></span>.
+	  </p>
+	</dd>
+<dt><span class="term">-b  <em class="replaceable"><code>address</code></em></span></dt>
+<dd>
+	  <p>
+	    Sets the source IP address of the query to
+	    <em class="parameter"><code>address</code></em>.  This must be a valid address
+	    on one of the host's network interfaces or "0.0.0.0" or "::".
+	    An optional source port may be specified by appending
+	    "#&lt;port&gt;"
+	  </p>
+	</dd>
+<dt><span class="term">-c <em class="replaceable"><code>class</code></em></span></dt>
+<dd>
+	  <p>
+	    Sets the query class for the requested data. Currently,
+	    only class "IN" is supported in <span class="command"><strong>delv</strong></span>
+	    and any other value is ignored.
+	  </p>
+	</dd>
+<dt><span class="term">-d <em class="replaceable"><code>level</code></em></span></dt>
+<dd>
+	  <p>
+	    Set the systemwide debug level to <code class="option">level</code>.
+	    The allowed range is from 0 to 99.
+	    The default is 0 (no debugging).
+	    Debugging traces from <span class="command"><strong>delv</strong></span> become
+	    more verbose as the debug level increases.
+	    See the <code class="option">+mtrace</code>, <code class="option">+rtrace</code>,
+	    and <code class="option">+vtrace</code> options below for additional
+	    debugging details.
+	  </p>
+	</dd>
+<dt><span class="term">-h</span></dt>
+<dd>
+	  <p>
+	    Display the <span class="command"><strong>delv</strong></span> help usage output and exit.
+	  </p>
+	</dd>
+<dt><span class="term">-i</span></dt>
+<dd>
+	  <p>
+	    Insecure mode. This disables internal DNSSEC validation.
+	    (Note, however, this does not set the CD bit on upstream
+	    queries. If the server being queried is performing DNSSEC
+	    validation, then it will not return invalid data; this
+	    can cause <span class="command"><strong>delv</strong></span> to time out. When it
+	    is necessary to examine invalid data to debug a DNSSEC
+	    problem, use <span class="command"><strong>dig +cd</strong></span>.)
+	  </p>
+	</dd>
+<dt><span class="term">-m</span></dt>
+<dd>
+	  <p>
+	    Enables memory usage debugging.
+	  </p>
+	</dd>
+<dt><span class="term">-p <em class="replaceable"><code>port#</code></em></span></dt>
+<dd>
+	  <p>
+	    Specifies a destination port to use for queries instead of
+	    the standard DNS port number 53.  This option would be used
+	    with a name server that has been configured to listen
+	    for queries on a non-standard port number.
+	  </p>
+	</dd>
+<dt><span class="term">-q <em class="replaceable"><code>name</code></em></span></dt>
+<dd>
+	  <p>
+	    Sets the query name to <em class="parameter"><code>name</code></em>.
+	    While the query name can be specified without using the
+	    <code class="option">-q</code>, it is sometimes necessary to disambiguate
+	    names from types or classes (for example, when looking up the
+	    name "ns", which could be misinterpreted as the type NS,
+	    or "ch", which could be misinterpreted as class CH).
+	  </p>
+	</dd>
+<dt><span class="term">-t <em class="replaceable"><code>type</code></em></span></dt>
+<dd>
+	  <p>
+	    Sets the query type to <em class="parameter"><code>type</code></em>, which
+	    can be any valid query type supported in BIND 9 except
+	    for zone transfer types AXFR and IXFR. As with
+	    <code class="option">-q</code>, this is useful to distinguish
+	    query name type or class when they are ambiguous.
+	    it is sometimes necessary to disambiguate names from types.
+	  </p>
+	  <p>
+	    The default query type is "A", unless the <code class="option">-x</code>
+	    option is supplied to indicate a reverse lookup, in which case
+	    it is "PTR".
+	  </p>
+	</dd>
+<dt><span class="term">-v</span></dt>
+<dd>
+	  <p>
+	    Print the <span class="command"><strong>delv</strong></span> version and exit.
+	  </p>
+	</dd>
+<dt><span class="term">-x <em class="replaceable"><code>addr</code></em></span></dt>
+<dd>
+	  <p>
+	    Performs a reverse lookup, mapping an addresses to
+	    a name.  <em class="parameter"><code>addr</code></em> is an IPv4 address in
+	    dotted-decimal notation, or a colon-delimited IPv6 address.
+	    When <code class="option">-x</code> is used, there is no need to provide
+	    the <em class="parameter"><code>name</code></em> or <em class="parameter"><code>type</code></em>
+	    arguments.  <span class="command"><strong>delv</strong></span> automatically performs a
+	    lookup for a name like <code class="literal">11.12.13.10.in-addr.arpa</code>
+	    and sets the query type to PTR.  IPv6 addresses are looked up
+	    using nibble format under the IP6.ARPA domain.
+	  </p>
+	</dd>
+<dt><span class="term">-4</span></dt>
+<dd>
+	  <p>
+	    Forces <span class="command"><strong>delv</strong></span> to only use IPv4.
+	  </p>
+	</dd>
+<dt><span class="term">-6</span></dt>
+<dd>
+	  <p>
+	    Forces <span class="command"><strong>delv</strong></span> to only use IPv6.
+	  </p>
+	</dd>
+</dl></div>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.10"></a><h2>QUERY OPTIONS</h2>
+
+
+    <p><span class="command"><strong>delv</strong></span>
+      provides a number of query options which affect the way results are
+      displayed, and in some cases the way lookups are performed.
+    </p>
+
+    <p>
+      Each query option is identified by a keyword preceded by a plus sign
+      (<code class="literal">+</code>).  Some keywords set or reset an
+      option.  These may be preceded by the string
+      <code class="literal">no</code> to negate the meaning of that keyword.
+      Other keywords assign values to options like the timeout interval.
+      They have the form <code class="option">+keyword=value</code>.
+      The query options are:
+
+      </p>
+<div class="variablelist"><dl class="variablelist">
+<dt><span class="term"><code class="option">+[no]cdflag</code></span></dt>
+<dd>
+	    <p>
+	      Controls whether to set the CD (checking disabled) bit in
+	      queries sent by <span class="command"><strong>delv</strong></span>. This may be useful
+	      when troubleshooting DNSSEC problems from behind a validating
+	      resolver. A validating resolver will block invalid responses,
+	      making it difficult to retrieve them for analysis. Setting
+	      the CD flag on queries will cause the resolver to return
+	      invalid responses, which <span class="command"><strong>delv</strong></span> can then
+	      validate internally and report the errors in detail.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]class</code></span></dt>
+<dd>
+	    <p>
+	      Controls whether to display the CLASS when printing
+	      a record. The default is to display the CLASS.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]ttl</code></span></dt>
+<dd>
+	    <p>
+	      Controls whether to display the TTL when printing
+	      a record. The default is to display the TTL.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]rtrace</code></span></dt>
+<dd>
+	    <p>
+	      Toggle resolver fetch logging. This reports the
+	      name and type of each query sent by <span class="command"><strong>delv</strong></span>
+	      in the process of carrying out the resolution and validation
+	      process: this includes including the original query and
+	      all subsequent queries to follow CNAMEs and to establish a
+	      chain of trust for DNSSEC validation.
+	    </p>
+	    <p>
+	      This is equivalent to setting the debug level to 1 in
+	      the "resolver" logging category. Setting the systemwide
+	      debug level to 1 using the <code class="option">-d</code> option will
+	      product the same output (but will affect other logging
+	      categories as well).
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]mtrace</code></span></dt>
+<dd>
+	    <p>
+	      Toggle message logging. This produces a detailed dump of
+	      the responses received by <span class="command"><strong>delv</strong></span> in the
+	      process of carrying out the resolution and validation process.
+	    </p>
+	    <p>
+	      This is equivalent to setting the debug level to 10
+	      for the "packets" module of the "resolver" logging
+	      category. Setting the systemwide debug level to 10 using
+	      the <code class="option">-d</code> option will produce the same output
+	      (but will affect other logging categories as well).
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]vtrace</code></span></dt>
+<dd>
+	    <p>
+	      Toggle validation logging. This shows the internal
+	      process of the validator as it determines whether an
+	      answer is validly signed, unsigned, or invalid.
+	    </p>
+	    <p>
+	      This is equivalent to setting the debug level to 3
+	      for the "validator" module of the "dnssec" logging
+	      category. Setting the systemwide debug level to 3 using
+	      the <code class="option">-d</code> option will produce the same output
+	      (but will affect other logging categories as well).
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]short</code></span></dt>
+<dd>
+	    <p>
+	      Provide a terse answer.  The default is to print the answer in a
+	      verbose form.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]comments</code></span></dt>
+<dd>
+	    <p>
+	      Toggle the display of comment lines in the output.  The default
+	      is to print comments.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]rrcomments</code></span></dt>
+<dd>
+	    <p>
+	      Toggle the display of per-record comments in the output (for
+	      example, human-readable key information about DNSKEY records).
+	      The default is to print per-record comments.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]crypto</code></span></dt>
+<dd>
+	    <p>
+	      Toggle the display of cryptographic fields in DNSSEC records.
+	      The contents of these field are unnecessary to debug most DNSSEC
+	      validation failures and removing them makes it easier to see
+	      the common failures.  The default is to display the fields.
+	      When omitted they are replaced by the string "[omitted]" or
+	      in the DNSKEY case the key id is displayed as the replacement,
+	      e.g. "[ key id = value ]".
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]trust</code></span></dt>
+<dd>
+	    <p>
+	      Controls whether to display the trust level when printing
+	      a record. The default is to display the trust level.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]split[=W]</code></span></dt>
+<dd>
+	    <p>
+	      Split long hex- or base64-formatted fields in resource
+	      records into chunks of <em class="parameter"><code>W</code></em> characters
+	      (where <em class="parameter"><code>W</code></em> is rounded up to the nearest
+	      multiple of 4).
+	      <em class="parameter"><code>+nosplit</code></em> or
+	      <em class="parameter"><code>+split=0</code></em> causes fields not to be
+	      split at all.  The default is 56 characters, or 44 characters
+	      when multiline mode is active.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]all</code></span></dt>
+<dd>
+	    <p>
+	      Set or clear the display options
+	      <code class="option">+[no]comments</code>,
+	      <code class="option">+[no]rrcomments</code>, and
+	      <code class="option">+[no]trust</code> as a group.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]multiline</code></span></dt>
+<dd>
+	    <p>
+	      Print long records (such as RRSIG, DNSKEY, and SOA records)
+	      in a verbose multi-line format with human-readable comments.
+	      The default is to print each record on a single line, to
+	      facilitate machine parsing of the <span class="command"><strong>delv</strong></span>
+	      output.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]dnssec</code></span></dt>
+<dd>
+	    <p>
+	      Indicates whether to display RRSIG records in the
+	      <span class="command"><strong>delv</strong></span> output.  The default is to
+	      do so.  Note that (unlike in <span class="command"><strong>dig</strong></span>)
+	      this does <span class="emphasis"><em>not</em></span> control whether to
+	      request DNSSEC records or whether to validate them.
+	      DNSSEC records are always requested, and validation
+	      will always occur unless suppressed by the use of
+	      <code class="option">-i</code> or <code class="option">+noroot</code> and
+	      <code class="option">+nodlv</code>.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]root[=ROOT]</code></span></dt>
+<dd>
+	    <p>
+	      Indicates whether to perform conventional (non-lookaside)
+	      DNSSEC validation, and if so, specifies the
+	      name of a trust anchor.  The default is to validate using
+	      a trust anchor of "." (the root zone), for which there is
+	      a built-in key.  If specifying a different trust anchor,
+	      then <code class="option">-a</code> must be used to specify a file
+	      containing the key.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]dlv[=DLV]</code></span></dt>
+<dd>
+	    <p>
+	      Indicates whether to perform DNSSEC lookaside validation,
+	      and if so, specifies the name of the DLV trust anchor.
+	      The default is to perform lookaside validation using
+	      a trust anchor of "dlv.isc.org", for which there is a
+	      built-in key.  If specifying a different name, then
+	      <code class="option">-a</code> must be used to specify a file
+	      containing the DLV key.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]tcp</code></span></dt>
+<dd>
+	    <p>
+	      Controls whether to use TCP when sending queries.
+	      The default is to use UDP unless a truncated
+	      response has been received.
+	    </p>
+	  </dd>
+<dt><span class="term"><code class="option">+[no]unknownformat</code></span></dt>
+<dd>
+	    <p>
+	      Print all RDATA in unknown RR type presentation format
+	      (RFC 3597). The default is to print RDATA for known types
+	      in the type's presentation format.
+	    </p>
+	  </dd>
+</dl></div>
+<p>
+
+    </p>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.11"></a><h2>FILES</h2>
+
+    <p><code class="filename">/etc/bind.keys</code></p>
+    <p><code class="filename">/etc/resolv.conf</code></p>
+  </div>
+
+  <div class="refsection">
+<a name="id-1.12"></a><h2>SEE ALSO</h2>
+
+    <p><span class="citerefentry">
+	<span class="refentrytitle">dig</span>(1)
+      </span>,
+      <span class="citerefentry">
+	<span class="refentrytitle">named</span>(8)
+      </span>,
+      <em class="citetitle">RFC4034</em>,
+      <em class="citetitle">RFC4035</em>,
+      <em class="citetitle">RFC4431</em>,
+      <em class="citetitle">RFC5074</em>,
+      <em class="citetitle">RFC5155</em>.
+    </p>
+  </div>
+
+</div></body>
+</html>

bin/delv/win32/delv.dsp.in

@@ -0,0 +1,103 @@
+# Microsoft Developer Studio Project File - Name="delv" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
+
+CFG=delv - @PLATFORM@ Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "delv.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "delv.mak" CFG="delv - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "delv - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "delv - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "delv - @PLATFORM@ Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/irs/win32/include" /I "../../../lib/irs/include" @CRYPTO@ /D "NDEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/irs/win32/Release/libirs.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/delv.exe"
+
+!ELSEIF  "$(CFG)" == "delv - @PLATFORM@ Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/irs/win32/include" /I "../../../lib/irs/include" @CRYPTO@ /D "_DEBUG" /D "WIN32" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X @COPTY@
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/irs/win32/Debug/libirs.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/delv.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "delv - @PLATFORM@ Release"
+# Name "delv - @PLATFORM@ Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\delv.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/delv/win32/delv.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "delv"=".\delv.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/delv/win32/delv.mak.in

@@ -0,0 +1,299 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on delv.dsp
+!IF "$(CFG)" == ""
+CFG=delv - @PLATFORM@ Debug
+!MESSAGE No configuration specified. Defaulting to delv - @PLATFORM@ Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "delv - @PLATFORM@ Release" && "$(CFG)" != "delv - @PLATFORM@ Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "delv.mak" CFG="delv - @PLATFORM@ Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "delv - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE "delv - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+!IF  "$(CFG)" == "delv - @PLATFORM@ Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "delv - @PLATFORM@ Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+ALL : "..\..\..\Build\Release\delv.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\delv.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\delv.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/irs/win32/include" /I "../../../lib/irs/include" @CRYPTO@ /D "NDEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\delv.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\delv.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/irs/win32/Release/libirs.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\delv.pdb" @MACHINE@ /out:"../../../Build/Release/delv.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\delv.obj"
+
+"..\..\..\Build\Release\delv.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "delv - @PLATFORM@ Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "..\..\..\Build\Debug\delv.exe" "$(OUTDIR)\delv.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\delv.obj"
+	-@erase "$(INTDIR)\delv.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\delv.pdb"
+	-@erase "$(OUTDIR)\delv.bsc"
+	-@erase "..\..\..\Build\Debug\delv.exe"
+	-@erase "..\..\..\Build\Debug\delv.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/irs/win32/include" /I "../../../lib/irs/include" @CRYPTO@ /D "_DEBUG" /D "WIN32" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\delv.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\delv.sbr"
+
+"$(OUTDIR)\delv.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/irs/win32/Debug/libirs.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\delv.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/delv.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\delv.obj"
+
+"..\..\..\Build\Debug\delv.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("delv.dep")
+!INCLUDE "delv.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "delv.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "delv - @PLATFORM@ Release" || "$(CFG)" == "delv - @PLATFORM@ Debug"
+SOURCE="..\delv.c"
+
+!IF  "$(CFG)" == "delv - @PLATFORM@ Release"
+
+
+"$(INTDIR)\delv.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "delv - @PLATFORM@ Debug"
+
+
+"$(INTDIR)\delv.obj"	"$(INTDIR)\delv.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP