In case when a zone fails to load because the file does not exist
or is malformed, we should not run the callback that updates the
zone database when the load is done. This is achieved by
unregistering the callbacks if at zone load end if the result
indicates something else than success.
As pointed out in !813 db_registered is sort of redundant. It is
set to `true` only in `dns_zone_rpz_enable_db()` right before the
`dns_rpz_dbupdate_callback()` callback is registered. It is only
required in that callback and it is the only place that the callback
is registered. Therefore there is no path that that `REQUIRE` can
fail.
The `db_registered` variable is only set to `false` in
`dns_rpz_new_zone`, so it is not like the variable is unset again
later.
The only other place where `db_registered` is checked is in
`rpz_detach()`. If `true`, it will call
`dns_db_updatenotify_unregister()`. However if that happens, the
`db_registered` is not set back to `false` thus this implies that
this may happen multiple times. If called a second time, most
likely the unregister function will return `ISC_R_NOTFOUND`, but
the return value is not checked anyway. So it can do without the
`db_registered` check.
This may happen when loading an RPZ failed and the code path skips
calling dns_db_endload(). The dns_rpz_zone_t object is still kept
marked as having registered db. So when this object is finally
destroyed in rpz_detach(), this code will incorrectly call
`dns_db_updatenotify_unregister()`:
if (rpz->db_registered)
dns_db_updatenotify_unregister(rpz->db,
dns_rpz_dbupdate_callback, rpz);
and trigger this assertion failure:
REQUIRE(db != NULL);
To fix this, only call `dns_db_updatenotify_unregister()` when
`rpz->db` is not NULL.
These tests check if a key with an unsupported algorithm in
managed-keys is ignored and when seeing an algorithm rollover to
an unsupported algorithm, the new key will be ignored too.
If `dns_dnssec_keyfromrdata` failed we don't need to call
`dst_key_free` because no `dstkey` was created. Doing so
nevertheless will result in an assertion failure.
This can happen if the key uses an unsupported algorithm.
removed the SDB databases in contrib/sdb as they hadn't been
maintained in some time, and were no longer able to link to named
without modification. also:
- cleaned up contrib/README, which still referred to contrib
subdirectores that were removed already, and linked to an obsolete URL.
- removed references to sdb in doc/misc/roadmap and doc/misc/sdb.
Illustrate the syntax for the policy options, with semicolons.
Explicitly mention the "default" policy.
Fix a few typos and remove some redundant wording.
When a mirror zone is verified, the 'ignore_kskflag' argument passed to
dns_zoneverify_dnssec() is set to false. This means that in order for
its verification to succeed, a mirror zone needs to have at least one
key with the SEP bit set configured as a trust anchor. This brings no
security benefit and prevents zones signed only using keys without the
SEP bit set from being mirrored, so change the value of the
'ignore_kskflag' argument passed to dns_zoneverify_dnssec() to true.
The "mirror" system test checks whether log messages announcing a mirror
zone coming into effect are emitted properly. However, the helper
functions responsible for waiting for zone transfers and zone loading to
complete do not wait for these exact log messages, but rather for other
ones preceding them, which introduces a possibility of false positives.
This problem cannot be addressed by just changing the log message to
look for because the test still needs to discern between transferring a
zone and loading a zone.
Add two new log messages at debug level 99 (which is what named
instances used in system tests are configured with) that are to be
emitted after the log messages announcing a mirror zone coming into
effect. Tweak the aforementioned helper functions to only return once
the log messages they originally looked for are followed by the newly
added log messages. This reliably prevents races when looking for
"mirror zone is now in use" log messages and also enables a workaround
previously put into place in the "mirror" system test to be reverted.
In the "mirror" system test, ns3 periodically sends trust anchor
telemetry queries to ns1 and ns2. It may thus happen that for some
non-recursive queries for names inside mirror zones which are not yet
loaded, ns3 will be able to synthesize a negative answer from the cached
records it obtained from trust anchor telemetry responses. In such
cases, NXDOMAIN responses will be sent with the root zone SOA in the
AUTHORITY section. Since the root zone used in the "mirror" system test
has the same serial number as ns2/verify.db.in and zone verification
checks look for the specified serial numbers anywhere in the answer, the
test could be broken if different zone names were used.
The +noauth dig option could be used to address this weakness, but that
would prevent entire responses from being stored for later inspection,
which in turn would hamper troubleshooting test failures. Instead, use
a different serial number for ns2/verify.db.in than for any other zone
used in the "mirror" system test and check the number of records in the
ANSWER section of each response.
Due to the way the "mirror" system test is set up, it is impossible for
the "verify-unsigned" and "verify-untrusted" zones to contain any serial
number other than the original one present in ns2/verify.db.in. Thus,
using presence of a different serial number in the SOA records of these
zones as an indicator of problems with mirror zone verification is
wrong. Look for the original zone serial number instead as that is the
one that will be returned by ns3 if one of the aforementioned zones is
successfully verified.
Add a warning about potential performance implications of configuring a
non-root zone as a mirror zone. Explain in more detail how each mirror
zone version is validated and how validation failures are handled. Move
the paragraphs describing how to set up IANA root zone mirroring higher
up, so that they can be more easily found by the reader. Explicitly
state that the "masters" option needs to be present for any mirror zone
which is not the root zone. Tweak the description of the interaction
between the "dnssec-validation" setting and root zone mirroring to make
it less ambiguous. Specify what the default "notify" setting is for
mirror zones.
* Alphabetize the option lists in the man page and help text
* Make the synopses more consistent between the man page and help
text, in particular the number of different modes
* Group mutually exclusive options in the man page synopses, and order
options so that it is more clear which are available in every mode
* Expand the DESCRIPTION to provide an overview of the output modes
and input modes
* Improve cross-references between options
* Leave RFC citations to the SEE ALSO section, and clarify which RFC
specifies what
* Clarify list of digest algorithms in dnssec-dsfromkey and dnssec-cds
man pages
Running "make install" in a separate job in the "test" phase of a CI
pipeline causes a lot of object files to be rebuilt due to the way
artifacts are passed between GitLab CI jobs (object files extracted from
the artifacts archive have older modification times than their
respective source files checked out using Git by the worker running the
"install" job). Test "make install" in one of the build jobs instead,
in order to prevent object rebuilding.
Using 'after_script' for this purpose was not an option because its
failures are ignored.
Duplicating the build script in two places would be error-prone in the
long run and thus was rejected as a solution. YAML anchors would also
not help in this case.
A "positive" test (`test -n "${RUN_MAKE_INSTALL}" && make install`)
would not work because:
- it would cause the build script to fail for any job not supposed to
run "make install",
- appending `|| :` to the shell pipeline would prevent "make install"
errors from causing a job failure.
Due to the above, a "negative" test is performed, so that:
- jobs not supposed to run "make install" succeed immediately,
- jobs supposed to run "make install" only succeed when "make install"
succeeds.
5153. [func] Zone transfer statistics (size, number of records, and
number of messages) are now logged for outgoing
transfers as well as incoming ones. [GL #513]
Ensure IXFR statistics are calculated correctly by dig and named, both
for incoming and outgoing transfers. Disable EDNS when using dig to
request an IXFR so that the same reference file can be used for testing
statistics calculated by both dig and named (dig uses EDNS by default
when sending transfer requests, which affects the number of bytes
transferred).
Ensure AXFR statistics are calculated correctly by dig and named, both
for incoming and outgoing transfers. Rather than employing a zone which
is already used in the "xfer" system test, create a new one whose AXFR
form spans multiple TCP messages. Disable EDNS when using dig to
request an AXFR so that the same reference file can be used for testing
statistics calculated by both dig and named (dig uses EDNS by default
when sending transfer requests, which affects the number of bytes
transferred).
Transfer statistics are currently only reported for incoming transfers,
even though they are equally useful for outgoing transfers. Define a
separate structure for keeping track of the number of messages, records,
and bytes sent during each outgoing transfer, along with the time each
outgoing transfer took. Repurpose the 'nmsg' field of the xfrout_ctx_t
structure for tracking the number of messages actually sent, ensuring it
is only increased after isc_socket_send() indicates success. Report the
statistics gathered when an outgoing transfer completes.
The 'nmsg' field of the xfrout_ctx_t structure is an integer, even
though it is only ever compared against 0 (for tracking whether the
QUESTION section has already been sent to the client). Use a boolean
instead as it is more appropriate and also enables 'nmsg' to be
repurposed.
the occluded-key test creates both a KEY and a DNSKEY. the second
call to dnssec-keygen calls dns_dnssec_findmatchingkeys(), which causes
a spurious warning to be printed when it sees the type KEY record.
this should be fixed in dnssec.c, but the meantime this change silences
the warning by reversing the order in which the keys are created.
- there was a memory leak when using negotiated TSIG keys.
- TKEY responses could only be signed when using a newly negotiated
key; if an existent matching TSIG was found in in the keyring it
would not be used.
- options that were flagged as obsolete or not implemented in 9.0.0
are now flagged as "ancient", and are a fatal error
- the ARM has been updated to remove these, along with other
obsolete descriptions of BIND 8 behavior
- the log message for obsolete options explicitly recommends removal
This adds a test for rndc dumpdb to ensure the correct "stale
comment" is printed. It also adds a test for non-stale data to
ensure no "stale comment" is printed for active RRsets.
In addition, the serve-stale tests are hardened with more accurate
grep calls.
This change makes rndc dumpdb correctly print the "; stale" line.
It also provides extra information on how long this data may still
be served to clients (in other words how long the stale RRset may
still be used).
up until now, message->tsigkey could only be set during parsing
of the request, but gss-tsig allows one to be created afterward.
this commit adds a new flag to the message structure, `new_tsigkey`,
which indicates that in this case it's okay for `dns_message_settsigkey()`
to be run on a message after parsing, without hitting any assertions due
to the lack of a TSIG in the request. this allows us to keep the current
restriction in place generally, but add an exception for TKEY processing.
it's probably better to just remove the restriction entirely (see next
commit).
The introduced grep call checks whether there was a
response that has an answer and an additional record.
There should be only one in the nsupdate output that is
for the TKEY response.
The introduced grep call checks whether there was a
response that has an answer and an additional record.
There should be only one in the nsupdate output that is
for the TKEY response.
Resolve "--enable-querytrace has negative performance impact - update the documentation to say this"
Closes#766
See merge request isc-projects/bind9!1367
also:
- rearranged things a little, adding a "dependencies" section
- removed the documentation of 'enable-threads'. (this part of
the change should not be backported.)
- Change 5023 (present in BIND 9.13.3+) removed BIND's internal
implementation of the getifaddrs() function which was required for
iterating network interfaces on Solaris 10 as that system does not
support that function natively.
- As of January 2019, FreeBSD 10.x is neither supported upstream nor
regularly tested by ISC, so move it from the list of regularly tested
platforms to the "Best effort" section.
- Debian 10, OpenBSD 6.3, and Fedora 29 have been released and are now
tested regularly.
use a lame server configuration to force SERVFAILs instead of killing ns2.
this prevents test failures that occurred due to a different behavior of
the netowrking stack in windows.
test the average delay between notifies instead of the minimum delay;
this helps avoid unnecessary test failures on systems with bursty
network performance.
dig retries a TCP query when a server closes the connection prematurely.
However, dig's exit code remains unaffected even if the second attempt
to get a response also fails with the same error for the same lookup,
which should not be the case. Ensure the exit code is updated
appropriately when a retry triggered by a TCP EOF condition fails.
- mishandling of trailing dots caused bad behavior with the
root zone or names like "example.com."
- fixing this exposed an error in dnssec-coverage caused the
wrong return value if there were KSK errors but no ZSK errors
- incidentally silenced the dnssec-keygen output in the coverage
system test
- dig command had the @ parameter in the wrong place
- private-dnskey and private-cdnskey are queried in a separate
loop, which strips 'private-' from the name to determine the qtype
In an attempt to ensure that:
- all important changes to repository contents are tested,
- pipelines are not automatically created for every single push,
- some flexibility is allowed for corner cases,
change pipeline triggering settings so that:
- full build & test pipelines are only automatically created for merge
requests and tags (both for creation and updates),
- pipelines for other repository changes (e.g. pushes to arbitrary
branches) can only be created manually, using GitLab's web
interface,
- merging a merge request only causes jobs pushing the updated ARM to
GitLab Pages to be run (as semi-linear Git history is enforced and
thus testing a MR is identical to testing the target branch
post-merge in terms of code),
- repository synchronization does not trigger duplicate pipelines in
projects which are set as mirroring targets.
Make sure all jobs are named using the following pattern:
[<job-type>:]<build-type>:<system>:<architecture>
where specifying <job-type> is optional for "precheck" and "build" jobs.
This should make it easier to quickly recognize:
- what kind of actions are performed by each job,
- which BIND build flavor is used by each job,
- which operating system image is used by each job.
There is no need to build BIND binaries before building docs and thus
the job building the current version of the ARM can be moved to the
build stage of CI.
Remove the following from .gitlab-ci.yml:
- unused variable definitions,
- unused Docker image definitions,
- commands which have no effect,
- sections which were commented out.
If we try to fetch a record from cache and need to look into
hints database we assume that the resolver is not primed and
start dns_resolver_prime(). Priming query is supposed to return
NSes for "." in ANSWER section and glue records for them in
ADDITIONAL section, so that we can fill that info in 'regular'
cache and not use hints db anymore.
However, if we're using a forwarder the priming query goes through
it, and if it's configured to return minimal answers we won't get
the addresses of root servers in ADDITIONAL section. Since the
only records for root servers we have are in hints database we'll
try to prime the resolver with every single query.
This patch adds a DNS_FETCHOPT_NOFORWARD flag which avoids using
forwarders if possible (that is if we have forward-first policy).
Using this flag on priming fetch fixes the problem as we get the
proper glue. With forward-only policy the problem is non-existent,
as we'll never ask for root server addresses because we'll never
have a need to query them.
Also added a test to confirm priming queries are not forwarded.
go back to regular resolution. When this happens the fetch timer is
already running, and we might end up in a situation where we we create
a fetch for qname-minimized query and after that the timer is triggered
and the query is retried (fctx_try) - which causes relaunching of
qname-minimization fetch - and since we already have a qmin fetch
for this fctx - assertion failure.
This fix stops the timer when doing qname minimization - qmin fetch
internal timer should take care of all the possible timeouts.
Log a message if a mirror zone becomes unusable for the resolver (most
usually due to the zone's expiration timer firing). Ensure that
verification failures do not cause a mirror zone to be unloaded
(instead, its last successfully verified version should be served if it
is available).
Log a message when a mirror zone is successfully loaded from disk and
subsequently verified.
This could have been implemented in a simpler manner, e.g. by modifying
an earlier code branch inside zone_postload() which checks whether the
zone already has a database attached and calls attachdb() if it does
not, but that would cause the resulting logs to indicate that a mirror
zone comes into effect before the "loaded serial ..." message is logged,
which would be confusing.
Tweak some existing sed commands used in the "mirror" system test to
ensure that separate test cases comprising it do not break each other.
Log a message when a mirror zone is successfully transferred and
verified, but only if no database for that zone was yet loaded at the
time the transfer was initiated.
This could have been implemented in a simpler manner, e.g. by modifying
zone_replacedb(), but (due to the calling order of the functions
involved in finalizing a zone transfer) that would cause the resulting
logs to suggest that a mirror zone comes into effect before its transfer
is finished, which would be confusing given the nature of mirror zones
and the fact that no message is logged upon successful mirror zone
verification.
Once the dns_zone_replacedb() call in axfr_finalize() is made, it
becomes impossible to determine whether the transferred zone had a
database attached before the transfer was started. Thus, that check is
instead performed when the transfer context is first created and the
result of this check is passed around in a field of the transfer context
structure. If it turns out to be desired, the relevant log message is
then emitted just before the transfer context is freed.
Taking this approach means that the log message added by this commit is
not timed precisely, i.e. mirror zone data may be used before this
message is logged. However, that can only be fixed by logging the
message inside zone_replacedb(), which causes arguably more dire issues
discussed above.
dns_zone_isloaded() is not used to double-check that transferred zone
data was correctly loaded since the 'shutdown_result' field of the zone
transfer context will not be set to ISC_R_SUCCESS unless axfr_finalize()
succeeds (and that in turn will not happen unless dns_zone_replacedb()
succeeds).
The handling of class and view arguments was broken, because the code
didn't realise that next_token() would overwrite the class name when
it parsed the view name. The code was trying to implement a syntax
like `refresh [[class] view]`, but it was documented to have a syntax
like `refresh [class [view]]`. The latter is consistent with other rndc
commands, so that is how I have fixed it.
Before:
$ rndc managed-keys refresh in rec
rndc: 'managed-keys' failed: unknown class/type
unknown class 'rec'
After:
$ rndc managed-keys refresh in rec
refreshing managed keys for 'rec'
There were missing newlines in the output from `rndc managed-keys
refresh` and `rndc managed-keys destroy`.
Before:
$ rndc managed-keys refresh
refreshing managed keys for 'rec'refreshing managed keys for 'auth'
After:
$ rndc managed-keys refresh
refreshing managed keys for 'rec'
refreshing managed keys for 'auth'
- the checkprivate function in the dnssec test set ret=0, erasing
results from previous tests and making the test appear to have passed
when it shouldn't have
- checkprivate needed a delay loop to ensure there was time for all
private signing records to be updated before the test
Resolve "Large NSEC3 responses cause failure in adding records to ncache and, eventually, FORMERR (instead of NXDOMAIN)"
Closes#804
See merge request isc-projects/bind9!1295
Resolve "Large NSEC3 responses cause failure in adding records to ncache and, eventually, FORMERR (instead of NXDOMAIN)"
Closes#804
See merge request isc-projects/bind9!1298
When a query times out after a socket is created and associated with a
given dig_query_t structure, calling isc_socket_cancel() causes
connect_done() to be run, which in turn takes care of all necessary
cleanups. However, certain errors (e.g. get_address() returning
ISC_R_FAMILYNOSUPPORT) may prevent a TCP socket from being created in
the first place. Since force_timeout() may be used in code handling
such errors, connect_timeout() needs to properly clean up a TCP query
which is not associated with any socket. Call clear_query() from
connect_timeout() after attempting to send a TCP query to the next
available server if the timed out query does not have a socket
associated with it, in order to prevent dig from hanging indefinitely
due to the dig_query_t structure not being detached from its parent
dig_lookup_t structure.
When a query times out and another server is available for querying
within the same lookup, the timeout handler - connect_timeout() - is
responsible for sending the query to the next server. Extract the
relevant part of connect_timeout() to a separate function in order to
improve code readability.
Before commit c2ec022f57, using the "-b"
command line switch for dig did not disable use of the other address
family than the one to which the address supplied to that option
belonged to. Thus, bind9_getaddresses() could e.g. prepare an
isc_sockaddr_t structure for an IPv6 address when an IPv4 address has
been passed to the "-b" command line option. To avoid attempting the
impossible (e.g. querying an IPv6 address from a socket bound to an IPv4
address), a certain code block in send_tcp_connect() checked whether the
address family of the server to be queried was the same as the address
family of the socket set up for sending that query; if there was a
mismatch, that particular server address was skipped.
Commit c2ec022f57 made
bind9_getaddresses() fail upon an address family mismatch between the
address the hostname passed to it resolved to and the address supplied
to the "-b" command line option. Such failures were fatal to dig back
then.
Commit 7f65860391 made
bind9_getaddresses() failures non-fatal, but also ensured that a
get_address() failure in send_tcp_connect() still causes the given query
address to be skipped (and also made such failures trigger an early
return from send_tcp_connect()).
Summing up, the code block handling address family mismatches in
send_tcp_connect() has been redundant since commit
c2ec022f57. Remove it.
5122. [bug] In a "forward first;" configuration, a forwarder
timeout did not prevent that forwarder from being
queried again after falling back to full recursive
resolution. [GL #315]
Since following a delegation resets most fetch context state, address
marks (FCTX_ADDRINFO_MARK) set inside lib/dns/resolver.c are not
preserved when a delegation is followed. This is fine for full
recursive resolution but when named is configured with "forward first;"
and one of the specified forwarders times out, triggering a fallback to
full recursive resolution, that forwarder should no longer be consulted
at each delegation point subsequently reached within a given fetch
context.
Add a new badnstype_t enum value, badns_forwarder, and use it to mark a
forwarder as bad when it times out in a "forward first;" configuration.
Since the bad server list is not cleaned when a fetch context follows a
delegation, this prevents a forwarder from being queried again after
falling back to full recursive resolution. Yet, as each fetch context
maintains its own list of bad servers, this change does not cause a
forwarder timeout to prevent that forwarder from being used by other
fetch contexts.
dnssec-signzone should sign a zonefile that contains a DNSKEY record
with an unsupported algorithm. Current behavior is that it will
fail, hitting a fatal error. The fix detects unsupported algorithms
and will not try to add it to the keylist.
Also when determining the maximum iterations for NSEC3, don't take
into account DNSKEY records in the zonefile with an unsupported
algorithm.
Resolve "current version of cygwin grep causes tests to fail when grepping for end of line character"
Closes#782
See merge request isc-projects/bind9!1230
Resolve "[ISC-support #13767] NSEC3 typemap improperly includes DNSKEY RRset instead of ignoring it as out-of-zone"
Closes#742
See merge request isc-projects/bind9!1231
Add a new libisccfg function, cfg_pluginlist_foreach(), which allows an
arbitrary callback to be invoked for every "plugin" stanza present in a
configuration object. Use this function for both loading plugins and
checking their configuration in order to reduce duplication of
configuration processing code present in bin/named/server.c and
lib/bind9/check.c.
- "hook" is now used only for hook points and hook actions
- the "hook" statement in named.conf is now "plugin"
- ns_module and ns_modlist are now ns_plugin and ns_plugins
- ns_module_load is renamed ns_plugin_register
- the mandatory functions in plugin modules (hook_register,
hook_check, hook_version, hook_destroy) have been renamed
- use a per-view module list instead of global hook_modules
- create an 'instance' pointer when registering modules, store it in
the module structure, and use it as action_data when calling
hook functions - this enables multiple module instances to be set
up in parallel
- also some nomenclature changes and cleanup
- added some hook points that will be needed for a dns64 module later
- moved some code from the beginning of query_respond() to
the end of query_prepresponse(); this has no effect on functionality
but means we can have a hook point at the top of query_respond(),
which seems nicer
- compressed duplicated code into query_zerottl_refetch() function
- added a qctx->answered flag so that a module can prevent
query_addrrset() from being called from query_respond() when
it's already been called from the module.
- this is necessary because adding the same hook to multiple views
causes the ISC_LIST link value to become inconsistent; it isn't
noticeable when only one hook action is ever registered at a
given hook point, but it will break things when there are two.
- eliminate qctx->hookdata and client->hookflags.
- use a memory pool to allocate data blobs in the filter-aaaa module,
and associate them with the client address in a hash table
- instead of detaching the client in query_done(), mark it for deletion
and then call ns_client_detach() from qctx_destroy(); this ensures
that it will still exist when the QCTX_DESTROYED hook point is
reached.
- use a get_hooktab() function to determine the hook table.
- PROCESS_HOOK now jumps to a cleanup tag on failure
- add PROCESS_ALL_HOOKS in query.c, to run all hook functions at
a specified hook point without stopping. this is to be used for
intiialization and destruction functions that must run in every
module.
- 'result' is set in PROCESS_HOOK only when a hook function
interrupts processing.
- revised terminology: a "callback" is now a "hook action"
- remove unused NS_PROCESS_HOOK and NS_PROCESS_HOOK_VOID macros.
- added a 'hookdata' array to qctx to store pointers to up to
16 blobs of data which are allocated by modules as needed.
each module is assigned an ID number as it's loaded, and this
is the index into the hook data array. this is to be used for
holding persistent state between calls to a hook module for a
specific query.
- instead of using qctx->filter_aaaa, we now use qctx->hookdata.
(this was the last piece of filter-aaaa specific code outside the
module.)
- added hook points for qctx initialization and destruction. we get
a filter-aaaa data pointer from the mempool when initializing and
store it in the qctx->hookdata table; return to to the mempool
when destroying the qctx.
- link the view to the qctx so that detaching the client doesn't cause
hooks to fail
- added a qctx_destroy() function which must be called after qctx_init;
this calls the QCTX_DESTROY hook and detaches the view
- general cleanup and comments
- make some cfg-parsing functions global so they can be run
from filter-aaaa.so
- add filter-aaaa options to the hook module's parser
- mark filter-aaaa options in named.conf as obsolete, remove
from named and checkconf, and update the filter-aaaa test not to
use checkconf anymore
- remove filter-aaaa-related struct members from dns_view
- allow multiple "hook" statements at global or view level
- add "optional bracketed text" type for optional parameter list
- load hook module from specified path rather than hardcoded path
- add a hooktable pointer (and a callback for freeing it) to the
view structure
- change the hooktable functions so they no longer update ns__hook_table
by default, and modify PROCESS_HOOK so it uses the view hooktable, if
set, rather than ns__hook_table. (ns__hook_table is retained for
use by unit tests.)
- update the filter-aaaa system test to load filter-aaaa.so
- add a prereq script to check for dlopen support before running
the filter-aaaa system test
not yet done:
- configuration parameters are not being passed to the filter-aaaa
module; the filter-aaaa ACL and filter-aaaa-on-{v4,v6} settings are
still stored in dns_view
- temporary kluge! in this version, for testing purposes,
named always searches for a filter-aaaa module at /tmp/filter-aaaa.so.
this enables the filter-aaaa system test to run even though the
code to configure hooks in named.conf hasn't been written yet.
- filter-aaaa-on-v4, filter-aaaa-on-v6 and the filter-aaaa ACL are
still configured in the view as they were before, not in the hook.
- these formerly static helper functions have been moved into client.c
and made external so that they can be used in hook modules as well as
internally in libns: query_newrdataset, query_putrdataset,
query_newnamebuf, query_newname, query_getnamebuf, query_keepname,
query_releasename, query_newdbversion, query_findversion
- made query_recurse() and query_done() into public functions
ns_query_recurse() and ns_query_done() so they can be called from
modules.
- the goal of this change is for AAAA filtering to be fully contained
in the query logic, and implemented at discrete points that can be
replaced with hook callouts later on.
- the new code may be slightly less efficient than the old filter-aaaa
implementation, but maximum efficiency was never a priority for AAAA
filtering anyway.
- we now use the rdataset RENDERED attribute to indicate that an AAAA
rdataset should not be included when rendering the message. (this
flag was originally meant to indicate that an rdataset has already
been rendered and should not be repeated, but it can also be used to
prevent rendering in the first place.)
- the DNS_MESSAGERENDER_FILTER_AAAA, NS_CLIENTATTR_FILTER_AAAA,
and DNS_RDATASETGLUE_FILTERAAAA flags are all now unnecessary and
have been removed.
- the purpose of this change is allow for more well-defined hook points
to be available in the query processing logic. some functions that
formerly didn't have access to 'qctx' do now; this is needed because
'qctx' is what gets passed when calling a hook function.
- query_addrdataset() has been broken up into three separate functions
since it used to do three unrelated things, and what was formerly
query_addadditional() has been renamed query_additional_cb() for
clarity.
- client->filter_aaaa is now qctx->filter_aaaa. (later, it will be moved
into opaque storage in the qctx, for use by the filter-aaaa module.)
- cleaned up style and braces
- move hooks.h to public include directory
- ns_hooktable_init() initializes a hook table. if NULL is passed in, it
initializes the global hook table
- ns_hooktable_save() saves a pointer to the current global hook table.
- ns_hooktable_reset() replaces the global hook table with different
one
- ns_hook_add() adds hooks at specified hook points in a hook table (or
the global hook table if the specified table is NULL)
- load and unload functions support dlopen() of hook modules (this is
adapted from dyndb and not yet functional)
- began adding new hook points to query.c
We can remove this, because it is used in `strtodsdigest` but that
already no longer covers the algorithm name "GOST".
There is one more GOST reference in `bin/python/isc/checkds.py.in`
but that is used for presentation format and probably should stay.
(cherry picked from commit 57d44fbc628d3c7dafdd545f6b83dbdcdc39a986)
In the test the quota is set to 400, and softquota to 90%*400=360.
We first attach to quota, and then if we're above softquota we
drop the oldest client. With new socket code and taskmgr it's
parallel enough to create a race between multiple instances doing
'attach to quota' and then 'drop oldest client' - making number
of clients go over softquota. It's not a problem in real life, as
it's just soft quota.
If you have a catalog zone containing 10.in-addr.arpa and an
explicitly-configured version which overrides the catz version,
`named` used to log:
catz: error "success" while trying to add zone "10.in-addr.arpa"
After this patch it logs:
catz: zone "10.in-addr.arpa" is overridden by explicitly configured zone
Apply various fixes and tweaks to Python configuration logic implemented
in the "configure" script:
- Prevent PYTHON_INSTALL_DIR, which holds the value passed to the
--with-python-install-dir option, from being set to "unspec" by
default as this breaks installing Python modules when the
--with-python-install-dir option is not used.
- Make the --with-python-install-dir option also work when the Python
interpreter is specified explicitly (using --with-python=<...>).
- Remove dnspython dependency which was erroneously introduced in
commit 31b0dc1f20: no installed Python
module depends on dnspython, it is only used in system tests, for
which dedicated scripts exist that check whether dnspython is
available and act accordingly.
- Improve contents and placement of error messages.
- Reduce duplication of code checking Python dependencies.
- Use Autoconf macros AS_CASE() and AS_IF() instead of plain shell
code.
- Update comments. Capitalize the word "Python" when referring to the
language itself rather than a specific executable.
The stock toolchain available on CentOS 6 for i386 is unable to use the
_mm_pause() intrinsic. Fix by using "rep; nop" assembly instructions on
that platform instead.
If we know that we'll have a task pool doing specific thing it's better
to use this knowledge and bind tasks to task queues, this behaves better
than randomly choosing the task queue.
- use bound resolver tasks - we have a pool of tasks doing resolutions,
we can spread the load evenly using isc_task_create_bound
- quantum set universally to 25
Mutexes are slower if they're in the same cache line. Since
fd's come in herds, and usually our listen sockets will have nearby
fd numbers, we mangle fdlocks so that the locks are further away.
Sometimes it is useful to set a 'floor' on the TTL for records
to be cached. Some sites like to use ridiculously low TTLs for
some reason, and that often is not compatible with slow links.
Signed-off-by: Michael Milligan <milli@acmeps.com>
Signed-off-by: LaMont Jones <lamont@debian.org>
5089. [bug] Restore localhost fallback in dig and host which is
used when no nameserver addresses present in
/etc/resolv.conf are usable due to the requested
address family restrictions. [GL #433]
In BIND 9.11 and earlier, dig and similar tools used liblwres for
parsing /etc/resolv.conf. After getting a list of servers from
liblwres, a tool would check the address family of each server found and
reject those unusable. When the resulting list of usable servers was
empty, localhost addresses were queried as a fallback.
When liblwres was removed in BIND 9.12, dig and similar tools were
updated to parse /etc/resolv.conf using libirs instead. As part of that
process, the localhost fallback was removed from bin/dig/dighost.c since
the localhost fallback built into libirs was deemed to be sufficient.
However, libirs only falls back to localhost if it does not find any
name servers at all; if it does find any valid nameserver entry in
/etc/resolv.conf, it just returns it to the caller because it is
oblivious to whether the caller supports IPv4 and/or IPv6 or not. The
code in bin/dig/dighost.c subsequently filters the returned list of
servers in get_server_list() according to the requested address family
restrictions. This may result in none of the addresses returned by
libirs being usable, in which case a tool will attempt to work with an
empty server list, causing a hang and subsequently a crash upon user
interruption.
Restore the localhost fallback in bin/dig/dighost.c to prevent the
aforementioned hangs and crashes and ensure recent BIND versions behave
identically to the older ones in the circumstances described above.
If a tool using the routines defined in bin/dig/dighost.c is sent an
interruption signal around the time a connection timeout is scheduled to
fire, connect_timeout() may be executed after destroy_libs() detaches
from the global task (setting 'global_task' to NULL), which results in a
crash upon a UDP retry due to bringup_timer() attempting to create a
timer with 'task' set to NULL. Fix by preventing connect_timeout() from
attempting a retry when shutdown is in progress.
Resolve "Follow-up from "Redefine ISC's int and boolean types to use <stdint.h> and <stdbool.h> types""
Closes#449
See merge request isc-projects/bind9!998
While implementing the new unit testing framework cmocka, it was found that the
BIND 9 code doesn't compile when assertions are disabled or replaced with any
function (such as mock_assert() from cmocka unit testing framework) that's not
directly recognized as assertion by the compiler.
This made the compiler to complain about blocks of code that was recognized as
unreachable before, but now it isn't.
The changes in this commit include:
* assigns default values to couple of local variables,
* moves some return statements around INSIST assertions,
* adds __builtin_unreachable(); annotations after some INSIST assertions,
* fixes one broken assertion (= instead of ==)
Tell the user explicitly about their mistakes:
* Unknown options, e.g. -list instead of -dump
or -delete instead of -remove.
* Unknown view names.
* Excess arguments.
Include the view name in `rndc nta -dump` output, for consistency with
the NTA add and remove actions.
When removing an NTA from all views, do not abort with an error if the
NTA was not found in one of the views.
At the beginning of qname minimization we get fctx->finds filled with what's
in the cache at this point, in worst case root servers. After doing full
run querying for NSes at different levels we need to clean it and refill
it with proper values from cache.
Ensure that serve-stale works as expected when returning stale answers
is enabled, the authoritative server does not respond, and there is no
cached answer available.
Remove the following functions in order to simplify socket code:
- isc_socket_recvv()
- isc_socket_sendtov()
- isc_socket_sendtov2()
- isc_socket_sendv()
Remove the following functions in order to simplify socket code:
- isc_socket_recvv()
- isc_socket_sendtov()
- isc_socket_sendtov2()
- isc_socket_sendv()
Refactor diagnostic tools code to no longer use:
- isc_socket_recvv()
- isc_socket_sendtov2()
- isc_socket_sendv()
as these functions will be removed shortly.
While isc_buffer_copyregion() calls isc_buffer_reserve() to ensure the
target buffer will have enough available space to append the contents of
the source region to it, the variables used for subsequently checking
available space are not updated accordingly after that call. This
prevents isc_buffer_copyregion() from working as expected for
auto-reallocated buffers: ISC_R_NOSPACE will be returned if enough space
is not already available in the target buffer before it is reallocated.
Fix by calling isc_buffer_used() and isc_buffer_availablelength()
directly instead of assigning their return values to local variables.
Add some basic checks for isc_buffer_copyregion() to ensure it behaves
as expected for both fixed-size buffers and buffers which can be
automatically reallocated. Adjust the list of headers included by
lib/isc/tests/buffer_test.c so that it matches what that test program
really uses.
If an RPZ zone is to be freed during an update, canceling the
update_quantum() event is not enough because the resources released when
an update completes also need to be accounted for. Failure to do this
results in a hang upon shutdown. Fix by copying cleanup code from the
end of update_quantum() to rpz_detach().
If another RPZ update is pending when processing the previous one nears
completion and min-update-interval is set to 0, isc_timer_reset() gets
called with 'interval' set to 0, which triggers an assertion failure.
To prevent such a scenario from causing a crash, queue the update event
directly instead of asking the timer thread to do it.
Rationale: the nonce here is only used to make sure there is a low
probability of duplication, according to section B.2 of RFC7873.
It is only 32-bit, and even if an attacker knows the algorithm used
to generate nonces it won't, in any way, give him any platform to
attack the server as long as server secret used to sign the
(nonce, time) pair with HMAC-SHA1 is secure.
On the other hand, currently, each packet sent requires (unnecessarily)
a CS pseudo-random number which is ineffective.
The XSL stylesheet used by the web interface does not currently include
any element which would cause a list of zones configured in each view to
be displayed, making the "Zones" section of the web interface empty
unless some zone has been configured with "zone-statistics full;" and
queried. Since this can be confusing, modify the XSL stylesheet so that
a list of zones configured in each view is displayed in the web
interface.
XXXX. [func] Replace old message digest and hmac APIs with more
generic isc_md and isc_hmac APIs, and convert their
respective tests to cmocka. [GL #305]
XXXX. [func] A default list of primary servers for the root zone is
now built into named, allowing the "masters" statement
to be omitted when configuring an IANA root zone
mirror. [GL #564]
XXXX. [func] Attempts to use mirror zones with recursion disabled
are now considered a configuration error. [GL #564]
XXXX. [func] The only valid zone-level NOTIFY settings for mirror
zones are now "notify no;" and "notify explicit;".
[GL #564]
XXXX. [func] Mirror zones are now configured using "type mirror;"
rather than "mirror yes;". [GL #564]
To minimize the effort required to set up IANA root zone mirroring,
define a default master server list for the root zone and use it when
that zone is to be mirrored and no master server list was explicitly
specified. Contents of that list are taken from RFC 7706 and are
subject to change in future releases.
Since the static get_masters_def() function in bin/named/config.c does
exactly what named_zone_configure() in bin/named/zoneconf.c needs to do,
make the former non-static and use it in the latter to prevent code
duplication.
Since mirror zone data is treated as cache data for access control
purposes, configuring a mirror zone and disabling recursion at the same
time would effectively prevent mirror zone data from being used since
disabling recursion also disables cache access to all clients by
default. Even though this behavior can be inhibited by configuration,
mirror zones are a recursive resolver feature and thus recursion is now
required to use them.
Ignore the fact that certain configurations might still trick named into
assuming recursion is enabled when it effectively is not since this
change is not meant to put a hard policy in place but rather just to
prevent accidental mirror zone misuse.
Previous way of handling NOTIFY settings for mirror zones was a bit
tricky: any value of the "notify" option was accepted, but it was
subsequently overridden with dns_notifytype_explicit. Given the way
zone configuration is performed, this resulted in the following
behavior:
- if "notify yes;" was set explicitly at any configuration level or
inherited from default configuration, it was silently changed and so
only hosts specified in "also-notify", if any, were notified,
- if "notify no;" was set at any configuration level, it was
effectively honored since even though zone->notifytype was silently
set to dns_notifytype_explicit, the "also-notify" option was never
processed due to "notify no;" being set.
Effectively, this only allowed the hosts specified in "also-notify" to
be notified, when either "notify yes;" or "notify explicit;" was
explicitly set or inherited from default configuration.
Clean up handling of NOTIFY settings for mirror zones by:
- reporting a configuration error when anything else than "notify no;"
or "notify explicit;" is set for a mirror zone at the zone level,
- overriding inherited "notify yes;" setting with "notify explicit;"
for mirror zones,
- informing the user when the "notify" setting is overridden, unless
the setting in question was inherited from default configuration.
Use a zone's 'type' field instead of the value of its DNS_ZONEOPT_MIRROR
option for checking whether it is a mirror zone. This makes said zone
option and its associated helper function, dns_zone_mirror(), redundant,
so remove them. Remove a check specific to mirror zones from
named_zone_reusable() since another check in that function ensures that
changing a zone's type prevents it from being reused during
reconfiguration.
Rather than overloading dns_zone_slave and discerning between a slave
zone and a mirror zone using a zone option, define a separate enum
value, dns_zone_mirror, to be used exclusively by mirror zones. Update
code handling slave zones to ensure it also handles mirror zones where
applicable.
Add a new zone type, CFG_ZONE_MIRROR, to libisccfg, in order to limit
the list of options which are considered valid for mirror zones. Update
the relevant configuration checks.
Contrary to what the documentation states, the "server-addresses"
static-stub zone option does not accept custom port numbers. Fix the
configuration type used by the "server-addresses" option to ensure
documentation matches source code. Remove a check_zoneconf() test which
is unnecessary with this fix in place.
Commonly used network configuration tools write scoped IPv6 nameserver
addresses to /etc/resolv.conf. libirs only handles these when it is
compiled with -DIRS_HAVE_SIN6_SCOPE_ID, which is not the default, and
only handles numeric scopes, which is not what network configuration
tools typically use. This causes dig to be practically unable to handle
scoped IPv6 nameserver addresses in /etc/resolv.conf.
Fix the problem by:
- not requiring a custom compile-time flag to be set in order for
scoped IPv6 addresses to be processed by getaddrinfo(),
- parsing non-numeric scope identifiers using if_nametoindex(),
- setting the sin6_scope_id field in struct sockaddr_in6 structures
returned by getaddrinfo() even if the AI_CANONNAME flag is not set.
Commit ba91243542 causes the resolver to
respond to a client query with FORMERR when all upstream queries sent to
the servers authoritative for QNAME elicit FORMERR responses. This
happens because resolver code returns DNS_R_FORMERR in such a case and
dns_result_torcode() acts as a pass-through for all arguments which are
already a valid RCODE.
The correct RCODE to set in the response returned to the client in the
case described above is SERVFAIL. Make sure this happens by overriding
the RCODE in query_gotanswer(), on the grounds that any format errors in
the client query itself should be caught long before execution reaches
that point. This change should not reduce query error logging accuracy
as the resolver code itself reports the exact reason for returning a
DNS_R_FORMERR result using log_formerr().
* Add configure option --enable-fips-mode that detects and enables FIPS mode
* Add a function to enable FIPS mode and call it on crypto init
* Log an OpenSSL error when FIPS_mode_set() fails and exit
* Report FIPS mode status in a separate log message from named
Whenever master or one for the v9_* branches gets updated, the current
ARM should be published on GitLab Pages. Add a pipeline stage which
takes care of triggering GitLab Pages pipelines. Extend the lifetime of
artifact archives containing the ARM to prevent GitLab Pages pipelines
from failing due to artifacts being unavailable.
Add a CI job which generates the HTML version of the ARM and makes it
available for download. Since this is expected to be a quick process,
the new job is enabled for all pipelines.
- this enables memory to be allocated and freed in dyndb modules
when named is linked statically. when we standardize on libtool,
this should become unnecessary.
- also, simplified the isc_mem_create/createx API by removing
extra compatibility functions
In some cases, setting qctx->result to DNS_R_SERVFAIL causes the value
of a 'result' variable containing a more specific failure reason to be
effectively discarded. This may cause certain query error log messages
to lack specificity despite a more accurate problem cause being
determined during query processing.
In other cases, qctx->result is set to DNS_R_SERVFAIL even though a more
specific error (e.g. ISC_R_NOMEMORY) could be explicitly indicated.
Since the response message's RCODE is derived from qctx->result using
dns_result_torcode(), which handles a number of possible isc_result_t
values and returns SERVFAIL for anything not explicitly listed, it is
fine to set qctx->result to something more specific than DNS_R_SERVFAIL
(in fact, this is already being done in a few cases). Modify most
QUERY_ERROR() calls so that qctx->result is set to a more specific error
code when possible. Adjust query_error() so that statistics are still
calculated properly. Remove the RECURSE_ERROR() macro which was
introduced exactly because qctx->result could be set to DNS_R_SERVFAIL
instead of DNS_R_DUPLICATE or DNS_R_DROP, which need special handling.
Modify dns_sdlz_putrr() so that it returns DNS_R_SERVFAIL when a DLZ
driver returns invalid RDATA, in order to prevent setting RCODE to
FORMERR (which is what dns_result_torcode() translates e.g. DNS_R_SYNTAX
to) while responding authoritatively.
When something goes wrong while recursing for an answer to a query,
query_gotanswer() sets a flag (qctx->want_stale) in the query context.
query_done() is subsequently called and it can either set up a stale
response lookup (if serve-stale is enabled) or conclude that a SERVFAIL
response should be sent. This may cause confusion when looking at query
error logs since the QUERY_ERROR() line responsible for setting the
response's RCODE to SERVFAIL is not in a catch-all branch of a switch
statement inside query_gotanswer() (like it is for authoritative
responses) but rather in a code branch which appears to have something
to do with serve-stale, even when the latter is not enabled.
Extract the part of query_done() responsible for checking serve-stale
configuration and optionally setting up a stale response lookup into a
separate function, query_usestale(), shifting the responsibility for
setting the response's RCODE to SERVFAIL to the same QUERY_ERROR() line
in query_gotanswer() which is evaluated for authoritative responses.
Manual page of host contained instructions to disable IDN processing
when it was built with libidn2. When refactoring IDN support however,
support for disabling IDN in host and nslookup was lost. Use also
environment variable and document it for nslookup, host and dig.
- tried to improve struct variable alignment
- ignore braces on function definitions so we can keep the existing
BIND style; braces can be on a new line or not
to update file, run: uncrustify --replace -c $TOP/.uncrustify.cfg <filename>
- note that if this is in the user's $HOME dir, it's the default
uncrustify config path name. this can be overridden with
'uncrustify -c filenaeme' or the UNCRUSTIFY_CONFIG environment
variable
- if dnssec-enable is no, then dnssec-validation now also defaults to
no. if dnssec-enable is yes, dnssec-validation defaults to auto or yes
depending on --disable-auto-validation.
- correct the doc
Revert parts of commit c3b8130fe8 which
inadvertently broke creating and validating EdDSA signatures:
1. EVP_DigestSignInit() returns 1 on success.
2. EdDSA does not support streaming (EVP_Digest*Update() followed by
EVP_Digest*Final()), only one shot operations.
Resolve "Make the chained delegations in reclimit behave like they would in a regular name server."
Closes#578
See merge request isc-projects/bind9!840
- update_log() is called to log update errors, but if those errors
occur before the zone is set (for example, when returning NOTAUTH)
it returns without logging anything.
Resolve "allow-recursion-on and allow-query-cache-on should default to each other if only one is set"
Closes#319
See merge request isc-projects/bind9!556
The race condition is the timer elapses before isc__timer_create()
returns the pointer to the caller. Assigning the return pointer before
enabling the timer will fix it.
Zone loading happens in a different task (zone->loadtask) than other
zone actions (zone->task). Thus, when zone_postload() is called in the
context of zone->loadtask, it may cause zone maintenance to be queued in
zone->task and another thread can then execute zone_maintenance() before
zone_postload() gets a chance to finish its work in the first thread.
This would not be a problem if zone_maintenance() accounted for this
possibility by locking the zone before checking the state of its
DNS_ZONEFLG_LOADPENDING flag. However, the zone is currently not locked
before the state of that flag is checked, which may prevent zone
maintenance from happening despite zone_postload() scheduling it. Fix
by locking the zone in zone_maintenance() before checking the state of
the zone's DNS_ZONEFLG_LOADPENDING flag.
- the text returned by "rndc nta" when adding NTAs to multiple views
was incorrectly terminated after the first line, so users only saw
on NTA added unless they checked the logs.
5031. [cleanup] Various defines in platform.h has been either dropped
if always or never triggered on supported platforms
or replaced with config.h equivalents if the defines
didn't have any impact on public headers. Workarounds
for LinuxThreads have been removed because NPTL is
available since Linux kernel 2.6.0.
5023. [func] Replace custom assembly for atomic operations with
atomic support from the compiler. The code will now use
C11 stdatomic, or __atomic, or __sync builtins with GCC
or Clang compilers, and Interlocked functions with MSVC.
[GL #10]
This properly orders clearing the freed pointer and calling isc_refcount_destroy
as early as possible to have ability to put proper memory barrier when cleaning
up reference counting.
Remove all kind of legacy compatibility layers (including IPv6, networking and functions defined by C99 or POSIX.1)
Closes#192
See merge request isc-projects/bind9!668
5016. [cleanup] Remove wrappers that try to fix broken or incomplete
implementations of IPv6, pthreads and other core
functionality required and used by BIND. [GL #192]
The "exitcode" variable is set to 9 if a TCP connection fails, but is
not reset to 0 if a subsequent TCP connection succeeds. This causes dig
to return a non-zero exit code if it succeeds in getting a TCP response
after a retry. Fix by resetting "exitcode" to 0 if connect_done()
receives an event with the "result" field set to ISC_R_SUCCESS.
Force ns3 to use a constant source address (10.53.0.3) when sending
transfer requests for the "initially-unavailable" zone to prevent
failures of transfers not triggered by bin/tests/system/mirror/tests.sh
from causing fallback to using a source address for which transfers of
that zone are refused throughout the entire "mirror" system test since
that might yield false positives.
Add a missing semicolon to prevent "make test" run from the top-level
directory from failing even when all system and unit tests succeed due
to "(cd fuzz && ${MAKE} check)" returning a non-zero exit code.
For inline-signed zones, the value of "ixfr-from-differences" is
hardcoded to:
- "yes" for the raw version of the zone,
- "no" for the signed version of the zone.
In other words, any user-provided "ixfr-from-differences" setting is
effectively ignored for an inline-signed zone. Ensure the user is aware
of that by adding a note to the ARM and logging a message when an
"ixfr-from-differences" option is found at the zone level.
A short time window exists between logging the addition of an NSEC3PARAM
record to a zone and committing it to the current version of the zone
database. If a query arrives during such a time window, an unsigned
response will be returned. One of the checks in the "inline" system
test requires NSEC3 records to be present in an answer - that check
would fail in the case described above. Use rndc instead of log
watching for checking whether zone signing and NSEC3 chain modifications
are complete in order to prevent intermittent "inline" system test
failures.
While "rndc reload" causes dns_zone_asyncload() to be called for the
signed version of an inline-signed zone, the subsequent zone_load() call
causes the raw version to be reloaded from storage. This means that
DNS_ZONEFLG_LOADPENDING gets set for the signed version of the zone by
dns_zone_asyncload() before the reload is attempted, but zone_postload()
is only called for the raw version and thus DNS_ZONEFLG_LOADPENDING is
cleared for the raw version, but not for the signed version. This in
turn prevents zone maintenance from happening for the signed version of
the zone.
Until commit 29b7efdd9f, this problem
remained dormant because DNS_ZONEFLG_LOADPENDING was previously
immediately, unconditionally cleared after zone loading was started
(whereas it should only be cleared when zone loading is finished or an
error occurs). This behavior caused other issues [1] and thus had to be
changed.
Fix reloading inline-signed zones by clearing DNS_ZONEFLG_LOADPENDING
for the signed version of the zone once the raw version reload
completes. Take care not to clear it prematurely during initial zone
load. Also make sure that DNS_ZONEFLG_LOADPENDING gets cleared when
zone_postload() encounters an error or returns early, to prevent other
scenarios from resulting in the same problem. Add comments aiming to
help explain code flow.
[1] see RT #47076
When an inline-signed zone is loaded, the master file for its signed
version is loaded and then a rollforward of the journal for the signed
version of the zone is performed. If DNS_JOURNALOPT_RESIGN is not set
during the latter phase, signatures loaded from the journal for the
signed version of the zone will not be scheduled for refresh. Fix the
conditional expression determining which flags should be used for the
dns_journal_rollforward() call so that DNS_JOURNALOPT_RESIGN is set when
zone_postload() is called for the signed version of an inline-signed
zone.
Extend bin/tests/system/stop.pl so that it can use "rndc halt" instead
of "rndc stop" as the former allows master file flushing upon shutdown
to be suppressed.
As part of resquery_response() refactoring [1], a goto statement was
replaced [2] with a call to a new function - originally called
rctx_delegation(), now folded into rctx_answer_none() - extracted from
existing code. However, one call site of that refactored function does
not reset the "result" variable, causing a referral with a non-empty
ANSWER section to be inadvertently treated as an error, which prevents
resolution of names reliant on servers sending such responses. Fix by
resetting the "result" variable to ISC_R_SUCCESS when a response
containing a non-empty ANSWER section can be treated as a delegation.
[1] see RT #45362
[2] see commit e1380a16741a3b4a57e54d7a9ce09dd12691522f
- added new 'validate-except' option, which configures an NTA with
expiry of 0xffffffff. NTAs with that value in the expiry field do not
expire, are are not written out when saving the NTA table and are not
dumped by rndc secroots
dst__openssl_toresult3() first calls toresult() and subsequently uses
ERR_get_error_line_data() in a loop. Given this, it is a mistake to use
ERR_get_error() in toresult() because it causes the retrieved error to
be removed from the OpenSSL error queue, thus preventing it from being
retrieved by the subsequent ERR_get_error_line_data() calls. Fix by
using ERR_peek_error() instead of ERR_get_error() in toresult().
When two or more absolute, two-label names are added to a completely
empty RBT, an extra, empty node for the root name will be created due to
node splitting. check_tree() expects that, but the extra node will not
be created when just one name is added to a completely empty RBT. This
problem could be handled inside check_tree(), but that would introduce
unnecessary complexity into it since adding a single name will result in
a different node count for a completely empty RBT (node count will be 1)
and an RBT containing only an empty node for the root name, created due
to prior node splitting (node count will be 2). Thus, first explicitly
create a node for the root name to prevent rare check_tree() failures
caused by a single name being added in the first iteration of the
insert/remove loop.
Each zone used in the "inline" system test contains a few dozen records.
Over a dozen of these zones are used in the test. Most records present
in these zones are not subsequently used in the test itself, but all of
them need to be signed by the named instances launched by the test,
which puts quite a bit of strain on lower-end machines, leading to
intermittent failures of the "inline" system test. Remove all redundant
records from the zones used in the "inline" system test in order to
stabilize it.
If "rndc signing -nsec3param ..." is ran for a zone which has not yet
been loaded or transferred (i.e. its "db" field is NULL), it will be
silently ignored by named despite rndc logging an "nsec3param request
queued" message, which is misleading. Prevent this by keeping a
per-zone queue of NSEC3PARAM change requests which arrive before a zone
is loaded or transferred and processing that queue once the raw version
of an inline-signed zone becomes available.
- [ ] Compare content with merge requests for the release.
- [ ] Check formatting.
- [ ] Build documentation on docs.isc.org.
- [ ] Commit changes and make sure the gitlab-ci tests are passing.
- [ ] Push the changes and tag ("alphatag" is an optional string such as "b1", "rc1" etc.). (```git tag -u <DEVELOPER_KEYID> -a -s -m "BIND 9.X.Y[alphatag]" v9_X_Y[alphatag]```)
- [ ] If this is the first tag for a release (e.g. beta), create a release branch named `release_v9_X_Y` (this allows development to continue on the release branch whilst release engineering continues).
- [ ] (SwEng) Run the "make release" Jenkins job to produce the tarballs and zips.
- [ ] (SwEng) Ask QA to sanity check the tarball and zips (passing to them the number of the Jenkins job).
- [ ] (QA) Sanity check the tarballs.
- [ ] (QA) Request the signature on the tarballs.
- [ ] (QA) Check signatures on tarballs.
- [ ] (QA) Tell Support to handle notification of release.
- [ ] (Manager) Inform Marketing of the release
- [ ] (Manager) Update the internal [BIND release dates wiki page](https://wiki.isc.org/bin/view/Main/BindReleaseDates) when public announcement has been made.
- [ ] (SwEng) Update DEB and RPM packages
- [ ] (SwEng) Merge the automatically prepared `prep 9.X.Y` commit which updates `version` and documentation on the release branch into the relevant maintenance branch (`v9_X`)
## Support
- [ ] Make tarballs and signatures available to download.
- [ ] Write release email to bind9-announce.
- [ ] Write email to bind9-users (if a major release).
- [ ] Update tickets in case of waiting support customers.
## Marketing
- [ ] Post short note to Twitter.
- [ ] Update [Wikipedia entry for BIND](http://en.wikipedia.org/wiki/BIND).
.\" Copyright (C) 2000-2011, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2011, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -74,7 +74,9 @@ will perform an NS query for "\&." (the root)\&.
It is possible to set per\-user defaults for
\fBdig\fR
via
${HOME}/\&.digrc\&. This file is read and any options in it are applied before the command line arguments\&.
${HOME}/\&.digrc\&. This file is read and any options in it are applied before the command line arguments\&. The
\fB\-r\fR
option disables this feature, for scripts that need predictable behaviour\&.
.PP
The IN and CH class names overlap with the IN and CH top level domain names\&. Either use the
\fB\-t\fR
@@ -174,11 +176,6 @@ reads a list of lookup requests to process from the given
using the command\-line interface\&.
.RE
.PP
\-i
.RS4
Do reverse IPv6 lookups using the obsolete RFC 1886 IP6\&.INT domain, which is no longer in use\&. Obsolete bit string label queries (RFC 2874) are not attempted\&.
.RE
.PP
\-k \fIkeyfile\fR
.RS4
Sign queries using TSIG using a key read from the given file\&. Key files can be generated using
@@ -208,6 +205,12 @@ The domain name to query\&. This is useful to distinguish the
from other arguments\&.
.RE
.PP
\-r
.RS4
Do not read options from
${HOME}/\&.digrc\&. This is useful for scripts that need predictable behaviour\&.
.RE
.PP
\-t \fItype\fR
.RS4
The resource record type to query\&. It can be any valid query type\&. If it is a resource record type supported in BIND 9, it can be given by the type mnemonic (such as "NS" or "AAAA")\&. The default query type is "A", unless the
@@ -246,9 +249,7 @@ arguments\&.
\fBdig\fR
automatically performs a lookup for a name like
94\&.2\&.0\&.192\&.in\-addr\&.arpa
and sets the query type and class to PTR and IN respectively\&. IPv6 addresses are looked up using nibble format under the IP6\&.ARPA domain (but see also the
\fB\-i\fR
option)\&.
and sets the query type and class to PTR and IN respectively\&. IPv6 addresses are looked up using nibble format under the IP6\&.ARPA domain\&.
.RE
.PP
\-y \fI[hmac:]\fR\fIkeyname:secret\fR
@@ -468,12 +469,16 @@ option is enabled\&. If short form answers are requested, the default is not to
.PP
\fB+[no]idnin\fR
.RS4
Process [do not process] IDN domain names on input\&. This requires IDN SUPPORT to have been enabled at compile time\&. The default is to process IDN input\&.
Process [do not process] IDN domain names on input\&. This requires IDN SUPPORT to have been enabled at compile time\&.
.sp
The default is to process IDN input when standard output is a tty\&. The IDN processing on input is disabled when dig output is redirected to files, pipes, and other non\-tty file descriptors\&.
.RE
.PP
\fB+[no]idnout\fR
.RS4
Convert [do not convert] puny code on output\&. This requires IDN SUPPORT to have been enabled at compile time\&. The default is to convert output\&.
Convert [do not convert] puny code on output\&. This requires IDN SUPPORT to have been enabled at compile time\&.
.sp
The default is to process puny code on output when standard output is a tty\&. The puny code processing on output is disabled when dig output is redirected to files, pipes, and other non\-tty file descriptors\&.
.RE
.PP
\fB+[no]ignore\fR
@@ -795,7 +800,10 @@ has been built with IDN (internationalized domain name) support, it can accept a
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, use parameters
\fI+noidnin\fR
and
\fI+noidnout\fR\&.
\fI+noidnout\fR
or define the
\fBIDN_DISABLE\fR
environment variable\&.
.SH"FILES"
.PP
/etc/resolv\&.conf
@@ -816,5 +824,5 @@ There are probably too many query options\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH"COPYRIGHT"
.br
Copyright \(co 2000-2011, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2000-2011, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2002, 2004, 2005, 2007-2009, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2002, 2004, 2005, 2007-2009, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -112,11 +112,6 @@ Print debugging traces\&. Equivalent to the
verbose option\&.
.RE
.PP
\-i
.RS4
Obsolete\&. Use the IP6\&.INT domain for reverse lookups of IPv6 addresses as defined in RFC1886 and deprecated in RFC4159\&. The default is to use IP6\&.ARPA as specified in RFC3596\&.
.RE
.PP
\-l
.RS4
List zone: The
@@ -257,7 +252,7 @@ If
\fBhost\fR
has been built with IDN (internationalized domain name) support, it can accept and display non\-ASCII domain names\&.
\fBhost\fR
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, defines the
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, define the
\fBIDN_DISABLE\fR
environment variable\&. The IDN support is disabled if the variable is set when
\fBhost\fR
@@ -274,5 +269,5 @@ runs\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH"COPYRIGHT"
.br
Copyright \(co 2000-2002, 2004, 2005, 2007-2009, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2000-2002, 2004, 2005, 2007-2009, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2004-2007, 2010, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2004-2007, 2010, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -277,6 +277,17 @@ Try the next nameserver if a nameserver responds with SERVFAIL or a referral (no
.PP
\fBnslookup\fR
returns with an exit status of 1 if any query failed, and 0 otherwise\&.
.SH"IDN SUPPORT"
.PP
If
\fBnslookup\fR
has been built with IDN (internationalized domain name) support, it can accept and display non\-ASCII domain names\&.
\fBnslookup\fR
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, define the
\fBIDN_DISABLE\fR
environment variable\&. The IDN support is disabled if the variable is set when
\fBnslookup\fR
runs or when the standard output is not a tty\&.
.SH"FILES"
.PP
/etc/resolv\&.conf
@@ -290,5 +301,5 @@ returns with an exit status of 1 if any query failed, and 0 otherwise\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH"COPYRIGHT"
.br
Copyright \(co 2004-2007, 2010, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2004-2007, 2010, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2017, 2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2017-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -102,7 +102,7 @@ Specify a digest algorithm to use when converting CDNSKEY records to DS records\
.sp
The
\fIalgorithm\fR
must be one of SHA\-1 (SHA1), SHA\-256 (SHA256), or SHA\-384 (SHA384)\&. These values are case insensitive\&. If no algorithm is specified, the default is SHA\-256\&.
must be one of SHA\-1, SHA\-256, or SHA\-384\&. These values are case insensitive, and the hyphen may be omitted\&. If no algorithm is specified, the default is SHA\-256\&.
.RE
.PP
\-c \fIclass\fR
@@ -293,5 +293,5 @@ RFC 7344\&.
.RE
.SH "COPYRIGHT"
.br
Copyright \(co 2017, 2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2017-2019 Internet Systems Consortium, Inc. ("ISC")
outputs the Delegation Signer (DS) resource record (RR), as defined in RFC 3658 and RFC 4509, for the given key(s)\&.
command outputs DS (Delegation Signer) resource records (RRs) and other similarly\-constructed RRs: with the
\fB\-l\fR
option it outputs DLV (DNSSEC Lookaside Validation) RRs; or with the
\fB\-C\fR
it outputs CDS (Child DS) RRs\&.
.PP
The input keys can be specified in a number of ways:
.PP
By default,
\fBdnssec\-dsfromkey\fR
reads a key file named like
Knnnn\&.+aaa+iiiii\&.key, as generated by
\fBdnssec\-keygen\fR\&.
.PP
With the
\fB\-f \fR\fB\fIfile\fR\fR
option,
\fBdnssec\-dsfromkey\fR
reads keys from a zone file or partial zone file (which can contain just the DNSKEY records)\&.
.PP
With the
\fB\-s\fR
option,
\fBdnssec\-dsfromkey\fR
reads a
keyset\-
file, as generated by
\fBdnssec\-keygen\fR\fB\-C\fR\&.
.SH "OPTIONS"
.PP
\-1
.RS 4
Use SHA\-1 as the digest algorithm (the default is to use both SHA\-1 and SHA\-256)\&.
An abbreviation for
\fB\-a SHA1\fR
.RE
.PP
\-2
.RS 4
Use SHA\-256 as the digest algorithm\&.
An abbreviation for
\fB\-a SHA\-256\fR
.RE
.PP
\-a \fIalgorithm\fR
.RS 4
Select the digest algorithm\&. The value of
\fBalgorithm\fR
must be one of SHA\-1 (SHA1), SHA\-256 (SHA256) or SHA\-384 (SHA384)\&. These values are case insensitive\&.
Specify a digest algorithm to use when converting DNSKEY records to DS records\&. This option can be repeated, so that multiple DS records are created for each DNSKEY record\&.
.sp
The
\fIalgorithm\fR
must be one of SHA\-1, SHA\-256, or SHA\-384\&. These values are case insensitive, and the hyphen may be omitted\&. If no algorithm is specified, the default is SHA\-256\&.
.RE
.PP
\-A
.RS 4
Include ZSKs when generating DS records\&. Without this option, only keys which have the KSK flag set will be converted to DS records and printed\&. Useful only in
\fB\-f\fR
zone file mode\&.
.RE
.PP
\-c \fIclass\fR
.RS 4
Specifies the DNS class (default is IN)\&. Useful only in
\fB\-s\fR
keyset or
\fB\-f\fR
zone file mode\&.
.RE
.PP
\-C
.RS 4
Generate CDS records rather than DS records\&. This is mutually exclusive with generating lookaside records\&.
.RE
.PP
\-T \fITTL\fR
.RS 4
Specifies the TTL of the DS records\&.
.RE
.PP
\-K \fIdirectory\fR
.RS 4
Look for key files (or, in keyset mode,
keyset\-
files) in
\fBdirectory\fR\&.
Generate CDS records rather than DS records\&. This is mutually exclusive with the
\fB\-l\fR
option for generating DLV records\&.
.RE
.PP
\-f \fIfile\fR
.RS 4
Zone file mode: in place of the keyfile name, the argument is the DNS domain name of a zone master file, which can be read from
Zone file mode:
\fBdnssec\-dsfromkey\fR\*(Aqs final
\fIdnsname\fR
argument is the DNS domain name of a zone whose master file can be read from
\fBfile\fR\&. If the zone name is the same as
\fBfile\fR, then it may be omitted\&.
.sp
If
\fBfile\fR
is set to
\fIfile\fR
is
"\-", then the zone data is read from the standard input\&. This makes it possible to use the output of the
Include ZSKs when generating DS records\&. Without this option, only keys which have the KSK flag set will be converted to DS records and printed\&. Useful only in zone file mode\&.
Prints usage information\&.
.RE
.PP
\-K \fIdirectory\fR
.RS 4
Look for key files or
keyset\-
files in
\fBdirectory\fR\&.
.RE
.PP
\-l \fIdomain\fR
.RS 4
Generate a DLV set instead of a DS set\&. The specified
\fBdomain\fR
is appended to the name for each record in the set\&. The DNSSEC Lookaside Validation (DLV) RR is described in RFC 4431\&. This is mutually exclusive with generating CDS records\&.
\fIdomain\fR
is appended to the name for each record in the set\&. This is mutually exclusive with the
\fB\-C\fR
option for generating CDS records\&.
.RE
.PP
\-s
.RS 4
Keyset mode: in place of the keyfile name, the argument is the DNS domain name of a keyset file\&.
Keyset mode:
\fBdnssec\-dsfromkey\fR\*(Aqs final
\fIdnsname\fR
argument is the DNS domain name used to locate a
keyset\-
file\&.
.RE
.PP
\-c \fIclass\fR
\-T \fITTL\fR
.RS 4
Specifies the DNS class (default is IN)\&. Useful only in keyset or zone file mode\&.
Specifies the TTL of the DS records\&. By default the TTL is omitted\&.
.RE
.PP
\-v \fIlevel\fR
@@ -128,11 +185,6 @@ Specifies the DNS class (default is IN)\&. Useful only in keyset or zone file mo
Sets the debugging level\&.
.RE
.PP
\-h
.RS 4
Prints usage information\&.
.RE
.PP
\-V
.RS 4
Prints version information\&.
@@ -141,16 +193,16 @@ Prints version information\&.
.PP
To build the SHA\-256 DS RR from the
\fBKexample\&.com\&.+003+26160\fR
keyfile name, the following command would be issued:
keyfile name, you can issue the following command:
.\" Copyright (C) 2008-2012, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2008-2012, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -55,7 +55,7 @@ of the key is specified on the command line\&. This must match the name of the z
.RS 4
Selects the cryptographic algorithm\&. The value of
\fBalgorithm\fR
must be one of RSAMD5, RSASHA1, DSA, NSEC3RSASHA1, NSEC3DSA, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&.
must be one of RSASHA1, NSEC3RSASHA1, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&.
.sp
If no algorithm is specified, then RSASHA1 will be used by default, unless the
\fB\-3\fR
@@ -63,9 +63,9 @@ option is specified, in which case NSEC3RSASHA1 will be used instead\&. (If
\fB\-3\fR
is used and an algorithm is specified, that algorithm will be checked for compatibility with NSEC3\&.)
.sp
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 or DSA is specified along with the
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 is specified along with the
\fB\-3\fR
option, then NSEC3RSASHA1 or NSEC3DSA will be used instead\&.
option, then NSEC3RSASHA1 will be used instead\&.
.sp
As of BIND 9\&.12\&.0, this option is mandatory except when using the
\fB\-S\fR
@@ -307,5 +307,5 @@ The PKCS#11 URI Scheme (draft\-pechanec\-pkcs11uri\-13)\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH "COPYRIGHT"
.br
Copyright \(co 2008-2012, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2008-2012, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2005, 2007-2012, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2005, 2007-2012, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -62,13 +62,13 @@ may be preferable to direct use of
.RS 4
Selects the cryptographic algorithm\&. For DNSSEC keys, the value of
\fBalgorithm\fR
must be one of RSAMD5, RSASHA1, DSA, NSEC3RSASHA1, NSEC3DSA, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&. For TKEY, the value must be DH (Diffie Hellman); specifying his value will automatically set the
must be one of RSASHA1, NSEC3RSASHA1, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&. For TKEY, the value must be DH (Diffie Hellman); specifying his value will automatically set the
\fB\-T KEY\fR
option as well\&.
.sp
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 or DSA is specified along with the
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 is specified along with the
\fB\-3\fR
option, then NSEC3RSASHA1 or NSEC3DSA will be used instead\&.
option, then NSEC3RSASHA1 will be used instead\&.
.sp
This parameter
\fImust\fR
@@ -327,21 +327,21 @@ and
files are generated for symmetric cryptography algorithms such as HMAC\-MD5, even though the public and private key are equivalent\&.
.SH "EXAMPLE"
.PP
To generate a 768\-bit DSA key for the domain
To generate an ECDSAP256SHA256 key for the domain
\fBexample\&.com\fR, the following command would be issued:
.PP
\fBdnssec\-keygen \-a DSA \-b 768 \-n ZONE example\&.com\fR
\fBdnssec\-keygen \-a ECDSAP256SHA256 \-n ZONE example\&.com\fR
.PP
The command would print a string of the form:
.PP
\fBKexample\&.com\&.+003+26160\fR
\fBKexample\&.com\&.+013+26160\fR
.PP
In this example,
\fBdnssec\-keygen\fR
creates the files
Kexample\&.com\&.+003+26160\&.key
Kexample\&.com\&.+013+26160\&.key
and
Kexample\&.com\&.+003+26160\&.private\&.
Kexample\&.com\&.+013+26160\&.private\&.
.SH "SEE ALSO"
.PP
\fBdnssec-signzone\fR(8),
@@ -354,5 +354,5 @@ RFC 4034\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH "COPYRIGHT"
.br
Copyright \(co 2000-2005, 2007-2012, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2000-2005, 2007-2012, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Tinderbox User
Evan Hunt
Matthijs Mekking
Mark AndrewsandEvan Hunt
Tony FinchandMark Andrews
Petr Menšík
Michał Kępień
Curtis BlackburnandMichał Kępień
Ondřej Surý
Ondřej Surý
Witold KręcickiandOndřej Surý
AlanandMark Andrews
Roland GruberandOndřej Surý
Andreas HasenackandMark Andrews
Brian ConryandOndřej Surý
Stephen Morris
Håvard EidnesandOndřej Surý
JoeyandEvan Hunt
Zhaolong ZhangandMichał Kępień
Thomas JachandOndřej Surý
Vicky Risk
Mukund SivaramanandWitold Kręcicki
Bhargava ShastryandOndřej Surý
Mathieu ArnoldandOndřej Surý