- compare key data when checking for a trust anchor match.
- allow for the possibility of multiple trust anchors with the same key ID
so we don't overlook possible matches.
(cherry picked from commit bc727e5ccc)
The libidn2 library on Ubuntu Bionic is broken and idn2_to_unicode_8zlz() does't
fail when it should. This commit ensures that we don't run the system test for
valid A-label in locale that cannot display with the buggy libidn2 as it would
break the tests.
(cherry picked from commit c42e3583f9)
It is possible dig used ACE encoded name in locale, which does not
support converting it to unicode. Instead of fatal error, fallback to
ACE name on output.
(cherry picked from commit c8a871e908)
Bring the files describing Windows-specific aspects of building and
installing BIND up to date. Remove the parts which are either outdated
(e.g. 32-bit build instructions), already included elsewhere (e.g. the
list of Windows systems BIND is known to run on), or inconvenient to
keep up to date in the long run (e.g. ARM chapter numbers).
(cherry picked from commit 646fcb733e)
Ensure BIND can be tested on Windows in GitLab to more quickly catch
build and test errors on that operating system.
Some notes:
- While build jobs are triggered for all pipelines, system test jobs
are not - due to the time it takes to run the complete system test
suite on Windows (about 20 minutes), the latter are only run for
pipelines created through GitLab's web interface and for pipelines
created for Git tags.
- Only the "Release" build configuration is currently used. Adding
"Debug" builds is a matter of extending .gitlab-ci.yml, but it was
not done for the time being due to questionable usefulness of
performing such builds in GitLab CI.
- Only a 64-bit build is performed. Adding support for 32-bit builds
is not planned to be implemented.
- Unit tests are still not run on Windows, but adding support for that
is on the roadmap.
- All Windows GitLab CI jobs are run inside Windows Server containers,
using the Custom executor feature of GitLab Runner as Windows Server
2016 is not supported by GitLab Runner's native Docker on Windows
executor and Windows Server 2019 is not yet widely available from
hosting providers.
- The Windows Docker image used by GitLab CI is not stored in the
GitLab Container Registry as it is over 27 GB in size and thus
passing it between GitLab and its runners is impractical.
- There is no vcvarsall.bat variant written in PowerShell and batch
scripts are no longer supported by GitLab Runner Custom executor, so
the environment variables set by vcvarsall.bat are injected back
into the PowerShell environment by processing the output of "set".
- Visual Studio parallel builds are a bit different than "make -jX"
builds as parallelization happens in two tiers: project parallelism
(controlled by the "/maxCpuCount" msbuild.exe switch) and compiler
parallelism (controlled by the "/MP" cl.exe switch). To limit the
total number of compiler processes spawned concurrently to a value
similar to the one used for Unix builds, msbuild.exe is allowed to
build at most 2 projects at once, each of which can spawn up to half
of BUILD_PARALLEL_JOBS worth of compiler processes. Using such
parameters is a fairly arbitrary decision taken to solve the
trade-off between compilation speed and runner load.
- Configuring network addresses in Windows Server containers is
tricky. Adding 10.53.0.1/24 and similar addresses to the vEthernet
interface created by Docker never causes ifconfig.bat to fail, but
in fact only one container can have any given IP address configured
at any given time (the request to add the same address in another
container is silently ignored). Thus, in order to allow multiple
system test jobs to be run in parallel, the addresses used in system
tests are configured on the loopback interfaces. Interestingly
enough, the addresses set on the loopback interfaces... persist
between containers. Fortunately, this is acceptable for the time
being and only requires ifconfig.bat failures to be ignored (as
ifconfig.bat will fail if it attempts to configure an already
existing address on an interface). We also need to wait for a brief
moment after calling ifconfig.bat as the addresses the latter
attempts to configure may not be immediately available after it
returns (and that causes runall.sh to error out). Finally, for some
reason we also need to signal that the DNS servers on each loopback
interface are to be configured using DHCP or else ifconfig.bat will
fail to add the requested addresses.
- Since named.pid files created by named instances used in system
tests contain Windows PIDs instead of Cygwin PIDs and various
versions of Cygwin "kill" react differently when passed Windows PIDs
without the -W switch, all "kill" invocations in GitLab CI need to
use that switch (otherwise they would print error messages which
would cause stop.pl to assume the process being killed died
prematurely). However, to preserve compatibility with older Cygwin
versions used in our other Windows test environments, we alter the
relevant scripts "on the fly" rather than in the Git repository.
- In the containers used for running system tests, Windows Error
Reporting is configured to automatically create crash dumps in
C:\CrashDumps. This directory is examined after the test suite is
run to ensure no crashes went under stop.pl's radar.
(cherry picked from commit ca36405a3d)
The SYSTEMTESTTOP variable is set by bin/tests/system/run.sh. When
system tests are run on Windows, that variable will contain an absolute
Cygwin path. In the case of the "statschannel" system test, using the
unmodified SYSTEMTESTTOP variable in tests.sh causes the RNDCCMD
variable to contain an invocation of a native Windows application with
an absolute Cygwin path passed as a parameter, which prevents rndc from
working in that system test. Until we have a cleaner solution, override
SYSTEMTESTTOP with a relative path to work around the issue and thus fix
the "statschannel" system test on Windows.
(cherry picked from commit 4deb2a48d9)
Make sure the CYGWIN environment variable is set whenever system tests
are run on Windows to prevent stop.pl from making incorrect assumptions
about the environment it is running in, which triggers e.g. false
reports about named instances crashing on shutdown when system tests are
run on Windows. This issue has not been caught earlier because the
CYGWIN environment variable was incidentally being set on a higher level
in our Windows test environments.
Error reporting for parallel system tests on Windows has been broken all
along: since all parallel.mk targets generated by parallel.sh pipe their
output through "tee", the return code from run.sh is lost and thus
running "make -f parallel.mk check" will not yield a non-zero return
code if some system tests fail. The same applies to runsequential.sh.
Yet, runall.sh on Windows only sets its return code to a non-zero value
if either "make -f parallel.mk check" or runsequential.sh returns a
non-zero return code. Fix by making runall.sh yield a non-zero return
code when testsummary.sh fails, which is the same approach as the one
used in the "test" target in bin/tests/system/Makefile.
(cherry picked from commit fed397c04b)
Until now, the build process for BIND on Windows involved upgrading the
solution file to the version of Visual Studio used on the build host.
Unfortunately, the executable used for that (devenv.exe) is not part of
Visual Studio Build Tools and thus there is no clean way to make that
executable part of a Windows Server container.
Luckily, the solution upgrade process boils down to just adding XML tags
to Visual Studio project files and modifying certain XML attributes - in
files which we pregenerate anyway using win32utils/Configure. Thus,
extend win32utils/Configure with three new command line parameters that
enable it to mimic what "devenv.exe bind9.sln /upgrade" does. This
makes the devenv.exe build step redundant and thus facilitates building
BIND in Windows Server containers.
(cherry picked from commit 0476e8f1ac)
Build configuration for the dnssec-cds Visual Studio project is absent
from the solution file template, which means the solution needs to be
upgraded using "devenv bind9.sln /upgrade" in order for the dnssec-cds
project to be built. Add the build configuration for dnssec-cds to the
solution file template so that upgrading the solution is not necessary
for building that project.
(cherry picked from commit 1d5259b0a0)
named-checkzone does not use libbind9. Update the Visual Studio project
file template for named-checkzone to reflect that, thus preventing
compilation issues during parallel builds.
(cherry picked from commit 918ebd9830)
When commit 8eb88aafee removed liblwres,
it also modified nsupdate to use libirs instead of liblwres, but the
Visual Studio project files were not updated to reflect that change.
Make sure the nsupdate Visual Studio project depends on the libirs
project to prevent compilation issues during parallel builds.
(cherry picked from commit de1859422e)
Make stderr fully buffered on Windows to improve named performance when
it is logging to stderr, which happens e.g. in system tests. Note that:
- line buffering (_IOLBF) is unavailable on Windows,
- fflush() is called anyway after each log message gets written to the
default stderr logging channels created by libisc.
(cherry picked from commit c72da3497d)
BIND system tests are run in a Cygwin environment. Apparently Cygwin
shell sets the SEM_NOGPFAULTERRORBOX bit in its process error mode which
is then inherited by all spawned child processes. This bit prevents the
Windows Error Reporting dialog from being displayed, which I assume is
part of an effort to contain memory handling errors triggered by Cygwin
binaries in the Cygwin environment. Unfortunately, this also prevents
automatic crash dump creation by Windows Error Reporting and Cygwin
itself does not handle memory errors in native Windows processes spawned
from a Cygwin shell.
Fix by clearing the SEM_NOGPFAULTERRORBOX bit inside named if it is
started in a Cygwin environment, thus overriding the Cygwin-set process
error mode in order to enable Windows Error Reporting to handle all
named crashes.
(cherry picked from commit 3d4b17806f)
When libxml2 is to be used in a multi-threaded application, the
xmlInitThreads() function must be called before any other libxml2
function. This function does different things on various platforms and
thus one can get away without calling it on Unix systems, but not on
Windows, where it initializes critical section objects used for
synchronizing access to data structures shared between threads. Add the
missing xmlInitThreads() call to prevent crashes on affected systems.
Also add a matching xmlCleanupThreads() call to properly release the
resources set up by xmlInitThreads().
(cherry picked from commit a3c0b00ef6)
Addresses the database changing w/o the changes being done under task lock.
Fix: build the database before assigning it to the zone.
(cherry picked from commit 4e686f40e0)
No problems have been observed on the FreeBSD GitLab CI runner during
the burn-in period, when FreeBSD jobs needed to be triggered manually.
Thus, make the FreeBSD jobs run automatically along other GitLab CI
jobs.
(cherry picked from commit f7bc95409d)
`/usr/share/sgml/docbook/xsl-stylesheets` and `/usr/share/dblatex` are
places where docbook-style-xsl and, respectively, dblatex packages on
Red Hat systems put their XSL templates. Unless we hint this place it
has to be added to `./configure` manually (`--with-docbook-xsl=...`):
https://src.fedoraproject.org/rpms/bind/blob/master/f/bind.spec#_691.
On Fedora 30:
Before
```
./configure
...
checking for Docbook-XSL path... auto
checking for html/docbook.xsl... "not found"
checking for xhtml/docbook.xsl... "not found"
checking for manpages/docbook.xsl... "not found"
checking for html/chunk.xsl... "not found"
checking for xhtml/chunk.xsl... "not found"
checking for html/chunktoc.xsl... "not found"
checking for xhtml/chunktoc.xsl... "not found"
checking for html/maketoc.xsl... "not found"
checking for xhtml/maketoc.xsl... "not found"
checking for xsl/docbook.xsl... "not found"
checking for xsl/latex_book_fast.xsl... "not found"
```
After:
```
./configure
...
checking for Docbook-XSL path... auto
checking for html/docbook.xsl... /usr/share/sgml/docbook/xsl-stylesheets/html/docbook.xsl
checking for xhtml/docbook.xsl... /usr/share/sgml/docbook/xsl-stylesheets/xhtml/docbook.xsl
checking for manpages/docbook.xsl... /usr/share/sgml/docbook/xsl-stylesheets/manpages/docbook.xsl
checking for html/chunk.xsl... /usr/share/sgml/docbook/xsl-stylesheets/html/chunk.xsl
checking for xhtml/chunk.xsl... /usr/share/sgml/docbook/xsl-stylesheets/xhtml/chunk.xsl
checking for html/chunktoc.xsl... /usr/share/sgml/docbook/xsl-stylesheets/html/chunktoc.xsl
checking for xhtml/chunktoc.xsl... /usr/share/sgml/docbook/xsl-stylesheets/xhtml/chunktoc.xsl
checking for html/maketoc.xsl... /usr/share/sgml/docbook/xsl-stylesheets/html/maketoc.xsl
checking for xhtml/maketoc.xsl... /usr/share/sgml/docbook/xsl-stylesheets/xhtml/maketoc.xsl
checking for xsl/docbook.xsl... /usr/share/dblatex/xsl/docbook.xsl
checking for xsl/latex_book_fast.xsl... /usr/share/dblatex/xsl/latex_book_fast.xsl
```
(cherry picked from commit 0055b9616e)
Fixing typos, typographical glitches. Added backticks around binaries,
modules, and libraries so it's more consistent. Added a paragraph with
ISC Security Policy.
(cherry picked from commit 4e2fdd7ee9)
Ensure BIND can be tested on FreeBSD in GitLab to more quickly catch
build and test errors on that operating system. Make the relevant jobs
optional until the CI environment supporting them is deemed stable
enough for continuous use.
FreeBSD jobs are run using the Custom executor feature of GitLab Runner.
Unlike the Docker executor, the Custom executor does not support the
"image" option and thus some way of informing the runner about the OS
version to use for a given job is necessary. Arguably the simplest way
of doing that without a lot of code duplication in .gitlab-ci.yml would
be to use a YAML template with a "variables" block specifying the
desired FreeBSD release to use, but including such a template in a job
definition would cause issues in case other variables also needed to be
set for that job (e.g. CFLAGS or EXTRA_CONFIGURE for build jobs). Thus,
only one FreeBSD YAML template is defined instead and the Custom
executor scripts on FreeBSD runners extract the OS version to use from
the CI job name. This allows .gitlab-ci.yml variables to be defined for
FreeBSD jobs in the same way as for Docker-based jobs.
(cherry picked from commit 51af91d007)
When kyua is called without the --logfile command line option, the log
file is created at a default location which is derived from the HOME
environment variable. On FreeBSD GitLab CI runners, /home is a
read-only directory and thus kyua invocations not using the --logfile
option fail when HOME is set to something beneath /home. Set --logfile
to /dev/null for all kyua invocations whose logs are irrelevant in order
to prevent kyua failures caused by HOME being non-writable.
(cherry picked from commit 1bffa602ba)
For newer versions of Xcode, "xcode-select --install" no longer installs
system headers into /usr/include (instead, they are installed in the
Xcode directory tree), so do not mention that path in the macOS section
of README to prevent confusion.
(cherry picked from commit 5af0b1d1d3)
Resolve "BIND | Potential for NULL pointer de-references plus memory leaks (CWE-476) in file 'dlz_mysqldyn_mod.c'"
See merge request isc-projects/bind9!2301
The native implementation's conversion from the uint8_t buffers to uint64_t now
follows the reference implementation that doesn't require aligned buffers.
when looking for a possible wildcard match in the RPZ summary database,
use an rbtnodechain to walk up label by label, rather than using the
node's parent pointer.
(cherry picked from commit 6e9be9a952)
GitLab 12.2 has introduced Directed Acyclic Graphs in the GitLab CI[1] that
allow jobs to run out-of-order and not wait for the whole previous stage to
complete.
1. https://docs.gitlab.com/ee/ci/directed_acyclic_graph/
(cherry picked from commit 04ce124279)
When updating the statistics for RRset types, if a header is marked
stale or ancient, the appropriate statistic counters are decremented,
then incremented.
Also fix some out of date comments.
(cherry picked from commit a3af2c57e7)
Having the decrement/increment logic in stats makes the code hard
to follow. Remove it here and adjust the unit test. The caller
will be responsible for maintaining the correct increments and
decrements for statistics counters (in the following commit).
(cherry picked from commit 48332d4478)
The stale RR types are now printed with '#'. This used to be the
prefix for RR types that were marked ancient, but commit
df50751585 changed the meaning. It is
probably better to keep '#' for stale RR types and introduce a new
prefix for reintroducing ancient type stat counters.
(cherry picked from commit c9d56a8185)
In the ARM section about RPZ, add text explicitly stating that ACLs take
precedence over RPZ to prevent users from expecting RPZ actions to be
applied to queries coming from clients which are not permitted access to
the resolver by ACLs.
(cherry picked from commit 33bddbb5d1)
Add a helper shell function, rndc_dumpdb(), which provides a convenient
way to call "rndc dumpdb" for a given server with optional additional
arguments. Since database dumping is an asynchronous process, the
function waits until the dump is complete before returning, which
prevents false positives in system tests caused by inspecting the dump
before its preparation is finished. The function also renames the dump
file before returning so that it does not get overwritten by subsequent
calls; this retains forensic data in case of an unexpected test failure.
(cherry picked from commit ab78e350dd)
The change fixes the following build failure on sparc T3 and older CPUs:
```
sparc-unknown-linux-gnu-gcc ... -O2 -mcpu=niagara2 ... -c rwlock.c
{standard input}: Assembler messages:
{standard input}:398: Error: Architecture mismatch on "pause ".
{standard input}:398: (Requires v9e|v9v|v9m|m8; requested architecture is v9b.)
make[1]: *** [Makefile:280: rwlock.o] Error 1
```
`pause` insutruction exists only on `-mcpu=niagara4` (`T4`) and upper.
The change adds `pause` configure-time autodetection and uses it if available.
config.h.in got new `HAVE_SPARC_PAUSE` knob. Fallback is a fall-through no-op.
Build-tested on:
- sparc-unknown-linux-gnu-gcc (no `pause`, build succeeds)
- sparc-unknown-linux-gnu-gcc -mcpu=niagara4 (`pause`, build succeeds)
Reported-by: Rolf Eike Beer
Bug: https://bugs.gentoo.org/691708
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
(cherry picked from commit a5ad6b16c5)
There's a deadlock in BIND 9 code where (dns_view_t){ .lock } and
(dns_resolver_t){ .buckets[i].lock } gets locked in different order. When
view->weakrefs gets converted to a reference counting we can reduce the locking
in dns_view_weakdetach only to cases where it's the last instance of the
dns_view_t object.
(cherry picked from commit a7c9a52c89)
Multiple resolvers in the "wildcard" system test are configured with a
single root hint: "ns.root-servers.nil", pointing to 10.53.0.1, which is
inconsistent with authoritative data served by ns1. This may cause
intermittent resolution failures, triggering false positives for the
"wildcard" system test. Prevent this from happening by making ns2, ns3,
and ns5 use root hints corresponding to the contents of ns1/root.db.in.
(cherry picked from commit dd430c3093)
The ns2 named instance in the "staticstub" system test is configured
with a single root hint commonly used in BIND system tests
(a.root-servers.nil with an address of 10.53.0.1), which is inconsistent
with authoritative data served by ns1. This may cause intermittent
resolution failures, triggering false positives for the "staticstub"
system test. Prevent this from happening by making ns1 serve data
corresponding to the contents of bin/tests/system/common/root.hint.
(cherry picked from commit 4b5e1da0e3)
Since Fedora 30 is the current Fedora release, replace Fedora 29 GitLab
CI jobs with their up-to-date counterparts.
(cherry picked from commit fac23cf939)
Ensure BIND is continuously tested on Alpine Linux as it is commonly
used as a base for Docker containers and employs a less popular libc
implementation, musl libc.
(cherry picked from commit 326a334b49)
"PST8PDT" is a legacy time zone name whose use in modern code is
discouraged. It so happens that using this time zone with musl libc
time functions results in different output than for other libc
implementations, which breaks the lib/isc/tests/time_test unit test.
Use the "America/Los_Angeles" time zone instead in order to get
consistent output across all tested libc implementations.
(cherry picked from commit f4daf6e0e7)
Appending output of a command to the same file as the one that command
is reading from is a dangerous practice. It seems to have accidentally
worked with all the awk implementations we have tested against so far,
but for BusyBox awk, doing this may result in the input/output file
being written to in an infinite loop. Prevent this from happening by
redirect awk output to a temporary file and appending its contents to
the original file in a separate shell pipeline.
(cherry picked from commit bb9c1654e2)
The Net::DNS Perl module needs the Digest::HMAC module to support TSIG.
However, since the latter is not a hard requirement for the former, some
packagers do not make Net::DNS depend on Digest::HMAC. If Net::DNS is
installed on a host but Digest::HMAC is not, the "xfer" system test
breaks in a very hard-to-debug way (ans5 returns TSIG RRs with empty
RDATA, which prevents TSIG-signed SOA queries and transfers from
working). Prevent this from happening by making the "xfer" system test
explicitly require Digest::HMAC apart from Net::DNS.
(cherry picked from commit b10d28d1e0)
The BusyBox version of sed treats leading '\+' in a regular expression
to be matched as a syntax error ("Repetition not preceded by valid
expression"), which triggers false positives for the "digdelv" system
test. Make the relevant sed invocations work portably across all sed
implementations by removing the leading backslash.
(cherry picked from commit 266e3ed52a)
The BusyBox version of awk treats some variables which other awk
implementations consider to be decimal values as octal values. This
intermittently breaks key event interval calculations in the "autosign"
system test, trigger false positives for it. Prevent the problem from
happening by stripping leading zeros from the affected awk variables.
(cherry picked from commit ad008f7dbf)
For some libc implementations, BUFSIZ is small enough (e.g. 1024 for
musl libc) to trigger compilation warnings about insufficient size of
certain buffers. Since the relevant buffers are used for printing DNS
names, increase their size to '(n + 1) * DNS_NAME_FORMATSIZE', where 'n'
is the number of DNS names which are printed to a given buffer. This
results in somewhat arbitrary, albeit nicely-aligned and large enough
buffer sizes.
(cherry picked from commit 3384455659)
Including <sys/errno.h> instead of <errno.h> raises a compiler warning
when building against musl libc. Always include <errno.h> instead of
<sys/errno.h> to prevent that compilation warning from being triggered
and to achieve consistency in this regard across the entire source tree.
(cherry picked from commit b5cd146033)
Make sure all unit tests include headers in a similar order:
1. Three headers which must be included before <cmocka.h>.
2. System headers.
3. UNIT_TESTING definition, followed by the <cmocka.h> header.
4. libisc headers.
5. Headers from other BIND libraries.
6. Local headers.
Also make sure header file names are sorted alphabetically within each
block of #include directives.
(cherry picked from commit 5381ac0fcc)
All unit tests define the UNIT_TESTING macro, which causes <cmocka.h> to
replace malloc(), calloc(), realloc(), and free() with its own functions
tracking memory allocations. In order for this not to break
compilation, the system header declaring the prototypes for these
standard functions must be included before <cmocka.h>.
Normally, these prototypes are only present in <stdlib.h>, so we make
sure it is included before <cmocka.h>. However, musl libc also defines
the prototypes for calloc() and free() in <sched.h>, which is included
by <pthread.h>, which is included e.g. by <isc/mutex.h>. Thus, unit
tests including "dnstest.h" (which includes <isc/mem.h>, which includes
<isc/mutex.h>) after <cmocka.h> will not compile with musl libc as for
these programs, <sched.h> will be included after <cmocka.h>.
Always including <cmocka.h> after all other header files is not a
feasible solution as that causes the mock assertion macros defined in
<isc/util.h> to mangle the contents of <cmocka.h>, thus breaking
compilation. We cannot really use the __noreturn__ or analyzer_noreturn
attributes with cmocka assertion functions because they do return if the
tested condition is true. The problem is that what BIND unit tests do
is incompatible with Clang Static Analyzer's assumptions: since we use
cmocka, our custom assertion handlers are present in a shared library
(i.e. it is the cmocka library that checks the assertion condition, not
a macro in unit test code). Redefining cmocka's assertion macros in
<isc/util.h> is an ugly hack to overcome that problem - unfortunately,
this is the only way we can think of to make Clang Static Analyzer
properly process unit test code. Giving up on Clang Static Analyzer
being able to properly process unit test code is not a satisfactory
solution.
Undefining _GNU_SOURCE for unit test code could work around the problem
(musl libc's <sched.h> only defines the prototypes for calloc() and
free() when _GNU_SOURCE is defined), but doing that could introduce
discrepancies for unit tests including entire *.c files, so it is also
not a good solution.
All in all, including <sched.h> before <cmocka.h> for all affected unit
tests seems to be the most benign way of working around this musl libc
quirk. While quite an ugly solution, it achieves our goals here, which
are to keep the benefit of proper static analysis of unit test code and
to fix compilation against musl libc.
(cherry picked from commit 59528d0e9d)
Resolvers in the "filter-aaaa" system test are configured with a single
root hint: "ns.rootservers.net", pointing to 10.53.0.1. However,
querying ns1 for "ns.rootservers.net" results in NXDOMAIN answers.
Since the TTL for the root hint is set to 0, it may happen that a
resolver's ADB will be asked to return any known addresses for
"ns.rootservers.net", but it will only have access to a cached NXDOMAIN
answer for that name and an expired root hint, which will result in a
resolution failure, triggering a false positive for the "filter-aaaa"
system test. Prevent this from happening by making all the root hints
consistent with authoritative data served by ns1.
(cherry picked from commit c19ebde14b)
Ensure BIND with dnstap support enabled is being continuously tested by
adding --enable-dnstap to the ./configure invocation used for CentOS 7
and Debian sid builds in GitLab CI.
(cherry picked from commit 2bf44c6cd4)
When the unit test is linked with dynamic libraries, the wrapping
doesn't occur, probably because it's different translation unit.
To workaround the issue, we provide thin wrappers with *real* symbol
names that just call the mocked functions.
(cherry picked from commit 839ed7894b)
This commit changes the BIND cookie algorithms to match
draft-sury-toorop-dnsop-server-cookies-00. Namely, it changes the Client Cookie
algorithm to use SipHash 2-4, adds the new Server Cookie algorithm using SipHash
2-4. The change doesn't make the SipHash 2-4 to be the default algorithm, this
is up to the operator.
Move the macOS section of <isc/endian.h> to a lower spot as it is
believed not to be the most popular platform for running BIND. Add a
comment and remove redundant definitions.
Instead of only supporting Linux, try making <isc/endian.h> support
other GNU platforms as well. Since some compilers define __GNUC__ on
BSDs (e.g. Clang on FreeBSD), move the relevant section to the bottom of
the platform-specific part of <isc/endian.h>, so that it only gets
evaluated when more specific platform determination criteria are not
met. Also include <byteswap.h> so that any byte-swapping macros which
may be defined in that file on older platforms are used in the fallback
definitions of the nonstandard hto[bl]e{16,32,64}() and
[bl]e{16,32,64}toh() conversion functions.
While Solaris does not support the nonstandard hto[bl]e{16,32,64}() and
[bl]e{16,32,64}toh() conversion functions, it does have some
byte-swapping macros available in <sys/byteorder.h>. Ensure these
macros are used in the fallback definitions of the aforementioned
nonstandard functions.
Since the hto[bl]e{16,32,64}() and [bl]e{16,32,64}toh() conversion
functions are nonstandard, add fallback definitions of these functions
to <isc/endian.h>, so that their unavailability does not prevent
compilation from succeeding.
Current versions of DragonFly BSD, FreeBSD, NetBSD, and OpenBSD all
support the modern variants of functions converting values between host
and big-endian/little-endian byte order while older ones might not.
Ensure <isc/endian.h> works properly in both cases.
5236. [func] Add SipHash 2-4 implementation in lib/isc/siphash.c
and switch isc_hash_function() to use SipHash 2-4.
[GL #605]
(cherry picked from commit dc9543abb3)
Each individual test opened GeoIP databases but the database handles were never
closed. This commit moves the open/close from the individual unit tests into
the _setup and _teardown methods where they really belong.
(cherry picked from commit d1c7b79183)
The MSVS C compiler requires every struct to have at least one member.
The dns_geoip_databases_t structure had one set of members for
HAVE_GEOIP and a different set for HAVE_GEOIP2, and none when neither
API is in use.
This commit silences the compiler error by moving the declaration of
dns_geoip_databases_t to types.h as an opaque reference, and commenting
out the contents of geoip.h when neither version of GeoIP is enabled.
(cherry picked from commit 81fcde5953)
When trying to extract the key ID from a key file name, some test code
incorrectly attempts to strip all leading zeros. This breaks tests when
keys with ID 0 are generated. Add a new helper shell function,
keyfile_to_key_id(), which properly handles keys with ID 0 and use it in
test code whenever a key ID needs to be extracted from a key file name.
(cherry picked from commit 7d6eaad1bd)
When printing a packet, dnstap-read checks whether its text form takes
up more than the 2048 bytes allocated for the output buffer by default.
If that is the case, the output buffer is automatically expanded, but
the truncated output is left in the buffer, resulting in malformed data
being printed. Clear the output buffer before expanding it to prevent
this issue from occurring.
(cherry picked from commit 3549abe81d)
- revise mapping of search terms to database types to match the
GeoIP2 schemas.
- open GeoIP2 databases when starting up; close when shutting down.
- clarify the logged error message when an unknown database type
is configured.
- add new geoip ACL subtypes to support searching for continent in
country databases.
- map geoip ACL subtypes to specific MMDB database queries.
- perform MMDB lookups based on subtype, saving state between
queries so repeated lookups for the same address aren't necessary.
(cherry picked from commit 6e0b93e5a0)
- "--with-geoip" is used to enable the legacy GeoIP library.
- "--with-geoip2" is used to enable the new GeoIP2 library
(libmaxminddb), and is on by default if the library is found.
- using both "--with-geoip" and "--with-geoip2" at the same time
is an error.
- an attempt is made to determine the default GeoIP2 database path at
compile time if pkg-config is able to report the module prefix. if
this fails, it will be necessary to set the path in named.conf with
geoip-directory
- Makefiles have been updated, and a stub lib/dns/geoip2.c has been
added for the eventual GeoIP2 search implementation.
(cherry picked from commit fea6b5bf10)
When GNU C Compiler is used on Solaris (11), the Thread Local Storage
is completely broken. The behaviour doesn't manifest when GNU ld is
used. Thus, we need to enforce usage of GNU ld when GNU C Compiler is
the compiler of choice.
For more background for this change, see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90912
(cherry picked from commit d584223653)
Add some information about the new statistic-channel DNS sign
metrics. Also add a CHANGES and release note entry.
(cherry picked from commit 3a3f40e372)
In addition to gather how many times signatures are created per
key in a zone, also count how many of those signature creations are
because of DNSSEC maintenance. These maintenance counters are
incremented if a signature is refreshed (but the RRset did not
changed), when the DNSKEY RRset is changed, and when that leads
to additional RRset / RRSIG updates (for example SOA, NSEC).
(cherry picked from commit 6f67546cd6)
This adds tests to the statschannel system test for testing if
the dnskey sign operation counters are incremented correctly.
It tests three cases:
1. A zone maintenance event where all the signatures that are about
to expire are resigned.
2. A dynamic update event where the new RR and other relevant records
(SOA, NSEC) are resigned.
3. Adding a standby key, that means the DNSKEY and SOA RRset are
resigned.
(cherry picked from commit a8750a8805)
Update per key tag the stats counter when it creates a new signature.
This can happen upon a dynamic update, or when doing DNSSEC
maintenance.
(cherry picked from commit 312fa7f65e)
In ISC-Bugs 45340, I wrote:
The Statistics channel offers links to Zones and Traffic.
Both produce valid data, but display as blank pages with
a web browser.
Zones never had XSL (I provided the original
implementation, but punted on the XSL).
Traffic has XSL, but it wasn't updated to reflect the
split between IPv4 and IPv6 data.
I've picked up enough XSL to fix my original omission,
and as penance for my sloth, fixed the Traffic bug as well.
(cherry picked from commit 96f0bbd4d5)
- when processing authoritative queries for ./NS, set 'gluedb' so
that glue will be included in the response, regardless of how
'minimal-responses' has been configured.
(cherry picked from commit e7684c7b64)
if "rndc reload" fails, the result code is supposed to be passed to
zone_postload, but for inline-signing zones, the result can be
overwritten first by a call to the ZONE_TRYLOCK macro. this can lead
to the partially-loaded unsigned zone being synced over to the signed
zone instead of being rejected.
(cherry picked from commit 0b792bd37b)
libidn2 2.2.0+ parses Punycode more strictly than older versions and
thus "dig +idnin +noidnout xn--19g" fails with libidn2 2.2.0+ but
succeeds with older versions.
We could preserve the old behavior by using the IDN2_NO_ALABEL_ROUNDTRIP
flag available in libidn2 2.2.0+, but:
- this change in behavior is considered a libidn2 bug fix [1],
- we want to make sure dig behaves as expected, not libidn2,
- implementing that would require additional configure.ac cruft.
Removing the problematic check appears to be the simplest solution as it
does not prevent the relevant block of checks in the "idna" system test
from achieving its purpose, i.e. ensuring dig properly handles invalid
U-labels.
[1] see upstream commit 241e8f486134793cb0f4a5b0e5817a97883401f5
(cherry picked from commit 60ce0ed411)
We increase recursclients when we attach to recursion quota,
decrease when we detach. In some cases, when we hit soft
quota, we might attach to quota without increasing recursclients
gauge. We then decrease the gauge when we detach from quota,
and it causes the statistics to underflow.
Fix makes sure that we increase recursclients always when we
succesfully attach to recursion quota.
(cherry picked from commit 24cfee942f)
Since the message confirming outgoing transfer completion is logged
asynchronously, it may happen that transfer statistics may not yet be
logged by the time the dig command triggering a given transfer returns.
This causes false positives for the "ixfr" and "xfer" system tests.
Prevent this from happening by checking outgoing transfer statistics up
to 10 times, in 1-second intervals.
(cherry picked from commit 9fc5e48b14)
Using atomic_int_fast64_t variables with atomic functions on x86 does
not cause Visual Studio to report build errors, but such operations
yield useless results. Since the isc_stat_t type is unconditionally
typedef'd to atomic_int_fast64_t, any code performing atomic operations
on isc_stat_t variables is broken in x86 Windows builds. Fix by using
the atomic_int_fast32_t type for isc_stat_t in x86 Windows builds.
(cherry picked from commit e21103f2d3)
BIND 9.11.0 has bumped DNS_CLIENTINFOMETHODS_VERSION and _AGE to
version 2 and 1 in the dlz_minimal.h because a member was addet to the
dnsclientinfo struct. It was found out that the new member is not
used anywhere and there are no accessor functions therefore the change
was reverted.
Later on, it was found out that the revert caused some problems to the
users of BIND 9, and thus this changes takes a different approach by
syncing the values other way around.
(cherry picked from commit 39344dfb3e)
In certain situations (e.g. a named instance crashing upon shutdown in a
system test which involves shutting down a server and restarting it
afterwards), a system test may succeed despite a named crash being
triggered. This must never be the case. Extend run.sh to mark a test
as failed if core dumps or log lines indicating assertion failures are
detected (the latter is only an extra measure aimed at test environments
in which core dumps are not generated; note that some types of crashes,
e.g. segmentation faults, will not be detected using this method alone).
(cherry picked from commit 7706f22924)
Make the get_named_xfer_stats() helper shell function more precise in
order to prevent it from matching the wrong lines as that may trigger
false positives for the "ixfr" and "xfer" system tests. As an example,
the regular expression responsible for extracting the number of bytes
transmitted throughout an entire zone transfer could also match a line
containing the following string:
transfer of '<zone-name>/IN': sending TCP message of <integer> bytes
However, such a line is not one summarizing a zone transfer.
Also simplify both get_dig_xfer_stats() and get_named_xfer_stats() by
eliminating the need for "echo" statements in them.
(cherry picked from commit fab67c074a)
If ns1/setup.sh generates a key with ID 0, the "KEYID" token in
ns1/named.conf.in will be replaced with an empty string, causing the
following broken statement to appear in ns1/named.conf:
tkey-dhkey "server" ;
Such a statement triggers false positives for the "tkey" system test due
to ns1 being unable to start with a broken configuration file. Fix by
tweaking the regular expression used for removing leading zeros from the
key ID, so that it removes at most 4 leading zeros.
(cherry picked from commit 0b7b1161c2)
Compiling with -O3 triggers the following warnings with GCC 9.1:
task.c: In function ‘isc_taskmgr_create’:
task.c:1386:43: warning: ‘%04u’ directive output may be truncated writing between 4 and 10 bytes into a region of size 6 [-Wformat-truncation=]
1386 | snprintf(name, sizeof(name), "isc-worker%04u", i);
| ^~~~
task.c:1386:32: note: directive argument in the range [0, 4294967294]
1386 | snprintf(name, sizeof(name), "isc-worker%04u", i);
| ^~~~~~~~~~~~~~~~
task.c:1386:3: note: ‘snprintf’ output between 15 and 21 bytes into a destination of size 16
1386 | snprintf(name, sizeof(name), "isc-worker%04u", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
private_test.c: In function ‘private_nsec3_totext_test’:
private_test.c:113:9: warning: array subscript 4 is outside array bounds of ‘uint32_t[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
113 | while (*sp == '\0' && slen > 0) {
| ^~~
private_test.c:106:11: note: while referencing ‘salt’
106 | uint32_t salt;
| ^~~~
Prevent these warnings from being triggered by increasing the size of
the relevant array (task.c) and reordering conditions (private_test.c).
(cherry picked from commit ce796ac1f4)
Compiling with -O3 triggers the following warning with GCC 8.3:
driver.c: In function ‘dlz_findzonedb’:
driver.c:193:29: warning: ‘%u’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 0 and 99 [-Wformat-truncation=]
snprintf(buffer, size, "%s#%u", addr_buf, port);
^~
driver.c:193:25: note: directive argument in the range [0, 65535]
snprintf(buffer, size, "%s#%u", addr_buf, port);
^~~~~~~
driver.c:193:2: note: ‘snprintf’ output between 3 and 106 bytes into a destination of size 100
snprintf(buffer, size, "%s#%u", addr_buf, port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Increase the size of the relevant array to prevent this warning from
being triggered.
(cherry picked from commit 44e6bb8b93)
Change the compiler optimization level for Debian sid build jobs from
-O2 to -O3 in order to enable triggering compilation warnings which are
not raised when -O2 is used.
(cherry picked from commit 3569487875)
this change silences a warning message and prevents the unwanted
use of smart quotes when using pandoc 2.7.1 to generate human-readable
versions of README and other markdown files.
(cherry picked from commit 3663f61e0e)
Replace grep calls with awk scripts to more precisely detect presence of
CDS and CDNSKEY records in a signed zone file, in order to prevent rare
false positives for the "smartsign" system test triggered by the strings
"CDS" and/or "CDNSKEY" being accidentally present in the Base64 form of
DNSSEC-related data in the zone file being checked.
(cherry picked from commit d0a73c7da6)
There's a small possibility of race between udp dispatcher and
socket code - socket code can still hold internal reference to a
socket while dispatcher calls isc_socket_open, which can cause
an assertion failure. Fix it by relaxing the assertion test, and
instead simply locking the socket in isc_socket_open.
(cherry picked from commit e517c18d98)
qname minimization, even in relaxed mode, can fail on
some very broken domains. In relaxed mode, instead of
asking for "foo.bar NS" ask for "_.foo.bar A" to either
get a delegation or NXDOMAIN. It will require more queries
than regular mode for proper NXDOMAINs.
(cherry picked from commit ae52c2117e)
Performing server setup checks using "+tries=3 +time=5" is redundant as
a single query is arguably good enough for determining whether a given
named instance was set up properly. Only use multiple queries with a
long timeout for resolution checks in the "legacy" system test, in order
to significantly reduce its run time (on a contemporary machine, from
about 1m45s to 0m40s).
(cherry picked from commit 47b850348c)
Send a test TCP query to the "plain" server during its setup check to
improve its consistency with the setup check for the "plain + no TCP"
server.
(cherry picked from commit bb939a03ff)
In the "legacy" system test, in order to make server setup checks more
consistent with each other, add further checks for either presence or
absence of the EDNS OPT pseudo-RR in the responses returned by the
tested named instances.
(cherry picked from commit 56ed1275c6)
Extract repeated dig and grep calls into two helper shell functions,
resolution_succeeds() and resolution_fails(), in order to reduce code
duplication in the "legacy" system test, emphasize the similarity
between all the resolution checks in that test, and make the conditions
for success and failure uniform for all resolution checks in that test.
(cherry picked from commit effd16ab25)
When testing named instances which are configured to drop outgoing UDP
responses larger than 512 bytes, querying with DO=1 may be used instead
of querying for large TXT records as the effect achieved will be
identical: an unsigned response for a SOA query will be below 512 bytes
in size while a signed response for the same query will be over 512
bytes in size. Doing this makes all resolution checks in the "legacy"
system test more similar. Add checks for the TC flag being set in UDP
responses which are expected to be truncated to further make sure that
tested named instances behave as expected.
(cherry picked from commit aaf81ca6ef)
One of the checks in the "legacy" system test inspects dig.out.1.test$n
instead of dig.out.2.test$n. Fix the file name used in that check.
(cherry picked from commit 3e7fa15ca3)
Sending TCP queries to test named instances with TCP support disabled
should cause dig output to contain the phrase "connection refused", not
"connection timed out", as such instances never open the relevant
sockets. Make sure that the "legacy" system test fails if the expected
phrase is not found in any of the relevant files containing dig output.
(cherry picked from commit 9491616e5c)
On some systems (namely Debian buster armhf) the readdir() call fails
with `Value too large for defined data type` unless the
_FILE_OFFSET_BITS=64 is defined. The correct way to fix this is to
get the appropriate compilation parameters from getconf system
interface.
(cherry picked from commit 4c7345bcb6)
Each network thread holds an array of locks, indexed by a hash
of fd. When we accept a connection we hold a lock in accepting thread.
We then generate the thread number and lock bucket for the new
connection socket - if we hit the same thread and lock bucket as
accepting socket we get a deadlock. Avoid this by checking if we're
in the same thread/lock bucket and not locking in this case.
(cherry picked from commit 75815c1581)
If named is configured to perform DNSSEC validation and also forwards
all queries ("forward only;") to validating resolvers, negative trust
anchors do not work properly because the CD bit is not set in queries
sent to the forwarders. As a result, instead of retrieving bogus DNSSEC
material and making validation decisions based on its configuration,
named is only receiving SERVFAIL responses to queries for bogus data.
Fix by ensuring the CD bit is always set in queries sent to forwarders
if the query name is covered by an NTA.
(cherry picked from commit 5e80488270)
Previously, only a message about missing Python was printed, which was
misleading to many users. The new message clearly states that Python
AND PLY is required and prints basic instructions how to install PLY
package.
(cherry picked from commit 55b48700da)
Fuzz input to dns_rdata_fromwire(). Then convert the result
to text, back to wire format, to multiline text, and back to wire
format again, checking for consistency throughout the sequence.
(cherry picked from commit 8ffdf6759e)
Resolve "Bind returning malformed packet error when sshfp record has fingerprint value less than 4 characters"
See merge request isc-projects/bind9!1905
there is now a common list of tests in conf.sh.common, with the
tests that are either unique to windows or to unix, or which are
enabled or disabled by configure or Configure, being listed in
separate variables in conf.sh.in and conf.sh.win32.
(cherry picked from commit a33237f070)
this moves the creation of "parallel.mk" into a separate shell script
instead of bin/tests/system/Makefile. that shell script can now be
executed by runall.sh, allowing us to make use of the cygwin "make"
command, which supports parallel execution.
(cherry picked from commit bbae24c140)
Windows systems do not allow a trailing period in file names while Unix
systems do. When BIND system tests are run, the $TP environment
variable is set to an empty string on Windows systems and to "." on Unix
systems. This environment variable is then used by system test scripts
for handling this discrepancy properly.
In multiple system test scripts, a variable holding a zone name is set
to a string with a trailing period while the names of the zone's
corresponding dlvset-* and/or dsset-* files are determined using
numerous sed invocations like the following one:
dlvsets="$dlvsets dlvset-`echo $zone |sed -e "s/.$//g"`$TP"
In order to improve code readability, use zone names without trailing
periods and replace sed invocations with variable substitutions.
To retain local consistency, also remove the trailing period from
certain other zone names used in system tests that are not subsequently
processed using sed.
(cherry picked from commit da2c1b74ad)
In the "allow-query" system test, ns3 uses a root hints file which
contains a single entry for a.root-servers.nil (10.53.0.1). This name
is not present in the root zone served by ns1, which means querying it
for that name and any type will yield an NXDOMAIN response. When
combined with unfavorable thread scheduling, this can lead to ns3
caching an NXDOMAIN response for the only root server it is aware of and
thus to false positives for the "allow-query" system test caused by ns3
returning unexpected SERVFAIL responses. Fix by modifying the root zone
served by ns1 so that authoritative responses to a.root-servers.nil
queries match the root hints file used by ns3.
(cherry picked from commit 978a0d2555)
in the "refactor tcpquota and pipeline refs" commit, the counting
of active interfaces was tightened in such a way that named could
fail to listen on an interface if there were more interfaces than
tcp-clients. when checking the quota to start accepting on an
interface, if the number of active clients was above zero, then
it was presumed that some other client was able to handle accepting
new connections. this, however, ignored the fact that the current client
could be included in that count, so if the quota was already exceeded
before all the interfaces were listening, some interfaces would never
listen.
we now check whether the current client has been marked active; if so,
then the number of active clients on the interface must be greater
than 1, not 0.
(cherry picked from commit 02365b87ea0b1ea5ea8b17376f6734c811c95e61)
(cherry picked from commit cae79e1bab)
- if the TCP quota has been exceeded but there are no clients listening
for new connections on the interface, we can now force attachment to the
quota using isc_quota_force(), instead of carrying on with the quota not
attached.
- the TCP client quota is now referenced via a reference-counted
'ns_tcpconn' object, one of which is created whenever a client begins
listening for new connections, and attached to by members of that
client's pipeline group. when the last reference to the tcpconn
object is detached, it is freed and the TCP quota slot is released.
- reduce code duplication by adding mark_tcp_active() function
- convert counters to stdatomic
(cherry picked from commit a8dd133d270873b736c1be9bf50ebaa074f5b38f)
(cherry picked from commit 4a8fc979c4)
- ensure that tcpactive is cleaned up correctly when accept() fails.
- set 'client->tcpattached' when the client is attached to the tcpquota.
carry this value on to new clients sharing the same pipeline group.
don't call isc_quota_detach() on the tcpquota unless tcpattached is
set. this way clients that were allowed to accept TCP connections
despite being over quota (and therefore, were never attached to the
quota) will not inadvertently detach from it and mess up the
accounting.
- simplify the code for tcpquota disconnection by using a new function
tcpquota_disconnect().
- before deciding whether to reject a new connection due to quota
exhaustion, check to see whether there are at least two active
clients. previously, this was "at least one", but that could be
insufficient if there was one other client in READING state (waiting
for messages on an open connection) but none in READY (listening
for new connections).
- before deciding whether a TCP client object can to go inactive, we
must ensure there are enough other clients to maintain service
afterward -- both accepting new connections and reading/processing new
queries. A TCP client can't shut down unless at least one
client is accepting new connections and (in the case of pipelined
clients) at least one additional client is waiting to read.
(cherry picked from commit 427a2fb4d17bc04ca3262f58a9dcf5c93fc6d33e)
(cherry picked from commit 0896841272)
Track pipeline groups using a shared reference counter
instead of a linked list.
(cherry picked from commit 31f392db20207a1b05d6286c3c56f76c8d69e574)
(cherry picked from commit 2211120222)
the TCP client quota could still be ineffective under some
circumstances. this change:
- improves quota accounting to ensure that TCP clients are
properly limited, while still guaranteeing that at least one client
is always available to serve TCP connections on each interface.
- uses more descriptive names and removes one (ntcptarget) that
was no longer needed
- adds comments
(cherry picked from commit 9e74969f85329fe26df2fad390468715215e2edd)
(cherry picked from commit d7e84cee0b)
tcp-clients settings could be exceeded in some cases by
creating more and more active TCP clients that are over
the set quota limit, which in the end could lead to a
DoS attack by e.g. exhaustion of file descriptors.
If TCP client we're closing went over the quota (so it's
not attached to a quota) mark it as mortal - so that it
will be destroyed and not set up to listen for new
connections - unless it's the last client for a specific
interface.
(cherry picked from commit eafcff07c25bdbe038ae1e4b6660602a080b9395)
(cherry picked from commit 9e7617cc84)
- Always set is_zonep in query_getdb; previously it was only set if
result was ISC_R_SUCCESS or ISC_R_NOTFOUND.
- Don't reset is_zone for redirect.
- Style cleanup.
(cherry picked from commit a85cc641d7a4c66cbde03cc4e31edc038a24df46)
(cherry picked from commit 486a201149)
Key IDs may accidentally match dig output that is not the key ID (for
example the RRSIG inception or expiration time, the query ID, ...).
Search for key ID + signer name should prevent that, as that is what
only should occur in the RRSIG record, and signer name always follows
the key ID.
(cherry picked from commit 83473b9758)
Remove sleep calls from test, rely on wait_for_log(). Make
wait_for_log() and dnssec_loadkeys_on() fail the test if the
appropriate log line is not found.
Slightly adjust the echo_i() lines to print only the key ID (not the
key name).
(cherry picked from commit 67f0635f3c)
One second may not be enough for an NSEC3 chain change triggered by an
UPDATE message to complete. Wait up to 10 seconds when checking whether
a given NSEC3 chain change is complete in the "nsupdate" system test.
(cherry picked from commit f8746cddbc)
In the "nsupdate" system test, do not sleep before checking results of
changes which are expected to be processed synchronously, i.e. before
nsupdate returns.
(cherry picked from commit 1c8e5ea333)
- named could return FORMERR if parsing iterative responses
ended with a result code such as DNS_R_OPTERR. instead of
computing a response code based on the result, in this case
we now just force the response to be SERVFAIL.
(cherry picked from commit 7402615697)
Make bin/tests/system/ifconfig.bat also configure addresses ending with
9 and 10, so that the script is in sync with its Unix counterpart.
Update comments listing the interfaces created by ifconfig.{bat,sh} so
that they do not include addresses whose last octet is zero (since an
address like 10.53.1.0/24 is not a valid host address and thus the
aforementioned scripts do not even attempt configuring them).
(cherry picked from commit b6c1cdfffe)
On Windows, the bin/tests/system/dnssec/signer/example.db.signed file
contains carriage return characters at the end of each line. Remove
them before passing the aforementioned file to the awk script extracting
key IDs so that the latter can work properly.
(cherry picked from commit e4280ed9f5)
As signals are currently not handled by named on Windows, instances
terminated using signals are not able to perform a clean shutdown, which
involves e.g. removing the lock file. Thus, waiting for a given
instance's lock file to be removed beforing assuming it is shut down
is pointless on Windows, so do not even attempt it.
(cherry picked from commit 761ba4514f)
5213. [bug] win32: Eliminated a race which allowed named.exe running
as a service to be killed prematurely during shutdown.
[GL #978]
(cherry picked from commit e7332343ed)
When a Windows service receives a request to stop, it should not set its
state to SERVICE_STOPPED until it is completely shut down as doing that
allows the operating system to kill that service prematurely, which in
the case of named may e.g. prevent the PID file and/or the lock file
from being cleaned up.
Set service state to SERVICE_STOP_PENDING when named begins its shutdown
and only report the SERVICE_STOPPED state immediately before exiting.
(cherry picked from commit 964749dfdb)
This tests both the cases when the DLV trust anchor is of an
unsupported or disabled algorithm, as well as if the DLV zone
contains a key with an unsupported or disabled algorithm.
(cherry picked from commit 3b7c849a3f)
Some values returned by dstkey_fromconfig() indicate that key loading
should be interrupted, others do not. There are also certain subsequent
checks to be made after parsing a key from configuration and the results
of these checks also affect the key loading process. All of this
complicates the key loading logic.
In order to make the relevant parts of the code easier to follow, reduce
the body of the inner for loop in load_view_keys() to a single call to a
new function, process_key(). Move dstkey_fromconfig() error handling to
process_key() as well and add comments to clearly describe the effects
of various key loading errors.
(cherry picked from commit b85007e0a6)
More specifically: ignore configured trusted and managed keys that
match a disabled algorithm. The behavioral change is that
associated responses no longer SERVFAIL, but return insecure.
(cherry picked from commit 1d45ad8f39)
Move from conf.sh.in to conf.sh.common as they will also need to be
added to conf.sh.win32. Add variables for testing disabled
algorithms.
(cherry picked from commit 07c35f32f9)
this restores functionality that was removed in commit 03be5a6b4e,
allowing named to search in authoritative zone databases outside the
current zone for additional data, if and only if recursion is allowed
and minimal-responses is disabled.
(cherry picked from commit 7fff3295f5)
The option `update-check-ksk` will look if both KSK and ZSK are
available before signing records. It will make sure the keys are
active and available. However, for operational practices keys may
be offline. This commit relaxes the update-check-ksk check and will
mark a key that is offline to be available when adding signature
tasks.
(cherry picked from commit 3cb8c49c73)
This commit adds a lengthy test where the ZSK is rolled but the
KSK is offline (except for when the DNSKEY RRset is changed). The
specific scenario has the `dnskey-kskonly` configuration option set
meaning the DNSKEY RRset should only be signed with the KSK.
A new zone `updatecheck-kskonly.secure` is added to test against,
that can be dynamically updated, and that can be controlled with rndc
to load the DNSSEC keys.
There are some pre-checks for this test to make sure everything is
fine before the ZSK roll, after the new ZSK is published, and after
the old ZSK is deleted. Note there are actually two ZSK rolls in
quick succession.
When the latest added ZSK becomes active and its predecessor becomes
inactive, the KSK is offline. However, the DNSKEY RRset did not
change and it has a good signature that is valid for long enough.
The expected behavior is that the DNSKEY RRset stays signed with
the KSK only (signature does not need to change). However, the
test will fail because after reconfiguring the keys for the zone,
it wants to add re-sign tasks for the new active keys (in sign_apex).
Because the KSK is offline, named determines that the only other
active key, the latest ZSK, will be used to resign the DNSKEY RRset,
in addition to keeping the RRSIG of the KSK.
The question is: Why do we need to resign the DNSKEY RRset
immediately when a new key becomes active? This is not required,
only once the next resign task is triggered the new active key
should replace signatures that are in need of refreshing.
(cherry picked from commit 8bc10bcf59)
Add dns_rdata_totext() and dns_rdata_fromtext() to fromwire for
valid inputs to ensure that what we accept in dns_rdata_fromwire()
can be written out and read back in.
(cherry picked from commit 36f30f5731)
In dns_rpz_update_from_db we call setup_update which creates the db
iterator and calls dns_dbiterator_first. This unpauses the iterator and
might cause db->tree_lock to be acquired. We then do isc_task_send(...)
on an event to do quantum_update, which (correctly) after each iteration
calls dns_dbiterator_pause, and re-isc_task_sends itself.
That's an obvious bug, as we're holding a lock over an async task send -
if a task requesting write (e.g. prune_tree) is scheduled on the same
workers queue as update_quantum but before it, it will wait for the
write lock indefinitely, resulting in a deadlock.
To fix it we have to pause dbiterator in setup_update.
(cherry picked from commit 06021b3529)
Some system tests assume dig's default setings are in effect. While
these defaults may only be silently overridden (because of specific
options set in /etc/resolv.conf) for BIND releases using liblwres for
parsing /etc/resolv.conf (i.e. BIND 9.11 and older), it is arguably
prudent to make sure that tests relying on specific +timeout and +tries
settings specify these explicitly in their dig invocations, in order to
prevent test failures from being triggered by any potential changes to
current defaults.
(cherry picked from commit b6cce0fb8b)
When parsing message with DNS_MESSAGE_BESTEFFORT (used exclusively in
tools, never in named itself) if we hit an invalid SIG(0) in wrong
place we continue parsing the message, and put the sig0 in msg->sig0.
If we then hit another sig0 in a proper place we see that msg->sig0
is already 'taken' and we don't free name and rdataset, and we don't
set seen_problem. This causes an assertion failure.
This fixes that issue by setting seen_problem if we hit second sig0,
tsig or opt, which causes name and rdataset to be always freed.
(cherry picked from commit 51a55ddbb7)
This changes dns_dtdata struct to not expose data types from dnstap.pb-c.h to
prevent the need for including this header where not really needed.
(cherry picked from commit 8ccce7e24b)
Simply looking for the key ID surrounded by spaces in the tested
dnssec-signzone output file is not a precise enough method of checking
for signatures prepared using a given key ID: it can be tripped up by
cross-algorithm key ID collisions and certain low key IDs (e.g. 60, the
TTL specified in bin/tests/system/dnssec/signer/example.db.in), which
triggers false positives for the "dnssec" system test. Make key ID
extraction precise by using an awk script which operates on specific
fields.
(cherry picked from commit a40c60e4c1)
The "mirror" system test expects all dig queries (including recursive
ones) to be responded to within 1 second, which turns out to be overly
optimistic in certain cases and leads to false positives being
triggered. Increase dig query timeout used throughout the "mirror"
system test to 2 seconds in order to alleviate the issue.
(cherry picked from commit 73afbdc552)
Currently, ns3 in the "mirror" system test sends trust anchor telemetry
queries every second as it is started with "-T tat=1". Given the number
of trust anchors configured on ns3 (9), TAT-related traffic clutters up
log files, hindering troubleshooting efforts. Increase TAT query
interval to 3 seconds in order to alleviate the issue.
Note that the interval chosen cannot be much higher if intermittent test
failures are to be avoided: TAT queries are only sent after the
configured number of seconds passes since resolver startup. Quick
experiments show that even on contemporary hardware, ns3 should be
running for at least 5 seconds before it is first shut down, so a
3-second TAT query interval seems to be a reasonable, future-proof
compromise. Ensure the relevant check is performed before ns3 is first
shut down to emphasize this trade-off and make it more clear by what
time TAT queries are expected to be sent.
(cherry picked from commit 6847a29b54)
"rndc dumpdb" works asynchronously, i.e. the requested dump may not yet
be fully written to disk by the time "rndc" returns. Prevent false
positives for the "serve-stale" system test by only checking dump
contents after the line indicating that it is complete is written.
(cherry picked from commit 6e3f812afc)
bin/tests/system/stop.pl only waits for the PID file to be cleaned up
while named cleans up the lock file after the PID file. Thus, the
aforementioned script may consider a named instance to be fully shut
down when in fact it is not.
Fix by also checking whether the lock file exists when determining a
given instance's shutdown status. This change assumes that if a named
instance uses a lock file, it is called "named.lock".
Also rename clean_pid_file() to pid_file_exists(), so that it is called
more appropriately (it does not clean up the PID file itself, it only
returns the server's identifier if its PID file is not yet cleaned up).
(cherry picked from commit c787a539d2)
MR !1141 broke the way stop.pl is invoked when start.pl fails:
- start.pl changes the working directory to $testdir/$server before
attempting to start $server,
- commit 27ee629e6b causes the $testdir
variable in stop.pl to be determined using the $SYSTEMTESTTOP
environment variable, which is set to ".." by all tests.sh scripts,
- commit e227815af5 makes start.pl pass
$test (the test's name) rather than $testdir (the path to the test's
directory) to stop.pl when a given server fails to start.
Thus, when a server is restarted from within a tests.sh script and such
a restart fails, stop.pl attempts to look for the server directory in a
nonexistent location ($testdir/$server/../$test, i.e. $testdir/$test,
instead of $testdir/../$test). Fix the issue by changing the working
directory before stop.pl is invoked in the scenario described above.
(cherry picked from commit 4afad2a047)
Change to cmocka broken initialization of TZ environment. This time,
commit 1cf1254051 is not soon enough. Has
to be moved more forward, before any other tests. It library is not full
reinitialized on each test.
(cherry picked from commit 71c4fad592)
Remove another remnant of shared secret HMAC-MD5 support.
Explain that with currently recommended setups DNSKEY records are
inserted automatically, but you can still use $INCLUDE in other cases.
(cherry picked from commit acc3fa04b7)
When sending an udp query (resquery_send) we first issue an asynchronous
isc_socket_connect and increment query->connects, then isc_socket_sendto2
and increment query->sends.
If we happen to cancel this query (fctx_cancelquery) we need to cancel
all operations we might have issued on this socket. If we are under very high
load the callback from isc_socket_connect (resquery_udpconnected) might have
not yet been fired. In this case we only cancel the CONNECT event on socket,
and ignore the SEND that's waiting there (as there is an `else if`).
Then we call dns_dispatch_removeresponse which kills the dispatcher socket
and calls isc_socket_close - but if system is under very high load, the send
we issued earlier might still not be complete - which triggers an assertion
because we're trying to close a socket that's still in use.
The fix is to always check if we have incomplete sends on the socket and cancel
them if we do.
(cherry picked from commit 56183a3917)
On Unix systems, the CYGWIN environment variable is not set at all when
BIND system tests are run. If a named instance crashes on shutdown or
otherwise fails to clean up its pidfile and the CYGWIN environment
variable is not set, stop.pl will print an uninitialized value warning
on standard error. Prevent this by using defined().
(cherry picked from commit 91e5a99b9b)
ifconfig.sh depends on config.guess for platform guessing. It uses it to
choose between ifconfig or ip tools to configure interfaces. If
system-wide automake script is installed and local was not found, use
platform guess. It should work well on mostly any sane platform. Still
prefers local guess, but passes when if cannot find it.
(cherry picked from commit 38301052e1)
When a zone is converted from NSEC to NSEC3, the private record at zone
apex indicating that NSEC3 chain creation is in progress may be removed
during a different (later) zone_nsec3chain() call than the one which
adds the NSEC3PARAM record. The "delzsk.example" zone check only waits
for the NSEC3PARAM record to start appearing in dig output while private
records at zone apex directly affect "rndc signing -list" output. This
may trigger false positives for the "autosign" system test as the output
of the "rndc signing -list" command used for checking ZSK deletion
progress may contain extra lines which are not accounted for. Ensure
the private record is removed from zone apex before triggering ZSK
deletion in the aforementioned check.
Also future-proof the ZSK deletion progress check by making it only look
at lines it should care about.
(cherry picked from commit e02de04e97)
For checks querying a named instance with "dnssec-accept-expired yes;"
set, authoritative responses have a TTL of 300 seconds. Assuming empty
resolver cache, TTLs of RRsets in the ANSWER section of the first
response to a given query will always match their authoritative
counterparts. Also note that for a DNSSEC-validating named resolver,
validated RRsets replace any existing non-validated RRsets with the same
owner name and type, e.g. cached from responses received while resolving
CD=1 queries. Since TTL capping happens before a validated RRset is
inserted into the cache and RRSIG expiry time does not impose an upper
TTL bound when "dnssec-accept-expired yes;" is set and, as pointed out
above, the original TTLs of the relevant RRsets equal 300 seconds, the
RRsets in the ANSWER section of the responses to expiring.example/SOA
and expired.example/SOA queries sent with CD=0 should always be exactly
120 seconds, never a lower value. Make the relevant TTL checks stricter
to reflect that.
(cherry picked from commit a85cc41486)
Always expecting a TTL of exactly 300 seconds for RRsets found in the
ADDITIONAL section of responses received for CD=1 queries sent during
TTL capping checks is too strict since these responses will contain
records cached from multiple DNS messages received during the resolution
process.
In responses to queries sent with CD=1, ns.expiring.example/A in the
ADDITIONAL section will come from a delegation returned by ns2 while the
ANSWER section will come from an authoritative answer returned by ns3.
If the queries to ns2 and ns3 happen at different Unix timestamps,
RRsets cached from the older response will have a different TTL by the
time they are returned to dig, triggering a false positive.
Allow a safety margin of 60 seconds for checks inspecting the ADDITIONAL
section of responses to queries sent with CD=1 to fix the issue. A
safety margin this large is likely overkill, but it is used nevertheless
for consistency with similar safety margins used in other TTL capping
checks.
(cherry picked from commit 8baf859063)
Commit c032c54dda inadvertently changed
the DNS message section inspected by one of the TTL capping checks from
ADDITIONAL to ANSWER, introducing a discrepancy between that check's
description and its actual meaning. Revert to inspecting the ADDITIONAL
section in the aforementioned check.
(cherry picked from commit a597bd52a6)
Changes introduced by commit 6b8e4d6e69
were incomplete as not all time-sensitive checks were updated to match
revised "nta-lifetime" and "nta-recheck" values. Prevent rare false
positives by updating all NTA-related checks so that they work reliably
with "nta-lifetime 12s;" and "nta-recheck 9s;". Update comments as well
to prevent confusion.
(cherry picked from commit 9a36a1bba3)
During "dlv" system test setup, the "sed" regex used for mangling the
DNSKEY RRset for the "druz" zone does not include the plus sign ("+"),
which may:
- cause the replacement to happen near the end of DNSKEY RDATA, which
can cause the latter to become an invalid Base64 string,
- prevent the replacement from being performed altogether.
Both cases prevent the "dlv" system test from behaving as intended and
may trigger false positives. Add the missing character to the
aforementioned regex to ensure the replacement is always performed on
bytes 10-25 of DNSKEY RDATA.
(cherry picked from commit fd13fef299)
Make delv honor the operating system's preferred ephemeral port range
instead of always using the default 1024-65535 range for outgoing
messages.
(cherry picked from commit ada6846a10)
Use them in structs for various rdata types where they are missing.
This doesn't change the structs since we are replacing explicit
uint8_t field types with aliases for uint8_t.
Use dns_dsdigest_t in library function arguments.
Improve dnssec-cds with these more specific types.
(cherry picked from commit 0f219714e1)
Alphabetize options and synopsis; remove spurious -z from synopsis;
remove remnants of deprecated -k option; remove mention of long-gone
TSIG support; refer to -T KEY in options that are only relevant to
pre-RFC3755 DNSSEC; remove unnecessary -n ZONE from the example, and
add a -f KSK example.
(cherry picked from commit 1954f8d2bf)
During server reconfiguration, plugin instances set up for the old views
are unloaded very close to the end of the whole process, after new
plugin instances are set up. As the log message announcing plugin
unloading is emitted at the default "info" level, the user might be
misled into thinking that it is the new plugin instances that are being
unloaded for some reason, particularly because all other messages logged
at the "info" level around the same time inform about setting things up
rather than tearing them down. Since no distinction is currently made
between destroying a view due to reconfiguration and due to a shutdown
in progress, there is no easy way to vary the contents of the log
message depending on circumstances. Since this message is not a
particularly critical one, demote it to debug level to prevent
confusion.
(cherry picked from commit af4b81f944)
Make nsupdate honor the operating system's preferred ephemeral port
range instead of always using the default 1024-65535 range for outgoing
messages.
(cherry picked from commit 06f582f23e)
5161. [func] named plugins are now installed into a separate
directory. Supplying a filename (a string without path
separators) in a "plugin" configuration stanza now
causes named to look for that plugin in that directory.
[GL #878]
(cherry picked from commit d2c960cfc2)
Add the -c command line option to the usage message for named-checkconf
as it is not present there despite being documented.
(cherry picked from commit cba155154b)
When the "library" part of a "plugin" configuration stanza does not
contain at least one path separator, treat it as a filename and assume
it is a name of a shared object present in the named plugin installation
directory. Absolute and relative paths can still be used and will be
used verbatim. Get the full path to a plugin before attempting to
check/register it so that all relevant log messages include the same
plugin path (apart from the one logged when the full path cannot be
determined).
(cherry picked from commit 1a9fc624ca)
Implement a helper function which, given an input string:
- copies it verbatim if it contains at least one path separator,
- prepends the named plugin installation directory to it otherwise.
This function will allow configuration parsing code to conveniently
determine the full path to a plugin module given either a path or a
filename.
While other, simpler ways exist for making sure filenames passed to
dlopen() cause the latter to look for shared objects in a specific
directory, they are very platform-specific. Using full paths is thus
likely the most portable and reliable solution.
Also added unit tests for ns_plugin_expandpath() to ensure it behaves
as expected for absolute paths, relative paths, and filenames, for
various target buffer sizes.
(Note: plugins share a directory with named on Windows; there is no
default plugin path. Therefore the source path is copied to the
destination path with no modification.)
(cherry picked from commit d181c28c60)
Installing named plugins into ${libdir} clutters the latter and is not
in line with common filesystem conventions. Instead, install named
plugins into a separate directory, ${libdir}/named.
(cherry picked from commit c527b7fd5c)
The "check key refreshes are resumed after root servers become
available" check may trigger a false positive for the "mkeys" system
test if the second example/TXT query sent by dig is received by ns5 less
than a second after it receives a REFUSED response to the upstream query
it sends to ns1 in order to resolve the first example/TXT query sent by
dig. Since that REFUSED response from ns1 causes ns5 to return a
SERVFAIL answer to dig, example/TXT is added to the SERVFAIL cache,
which is enabled by default with a TTL of 1 second. This in turn may
cause ns5 to return a cached SERVFAIL response to the second example/TXT
query sent by dig, i.e. make ns5 not perform full query processing as
expected by the check.
Since the primary purpose of the check in question is to ensure that key
refreshes are resumed once initially unavailable root servers become
available, the optimal solution appears to be disabling SERVFAIL cache
for ns5 as doing that still allows the check to fulfill its purpose and
it is arguably more prudent than always sleeping for 1 second.
(cherry picked from commit 7c6bff3c4e)
For consistency between all system tests, add missing setup.sh scripts
for tests which do not have one yet and ensure every setup.sh script
calls its respective clean.sh script.
Temporary files created by a given system test should be removed by its
clean.sh script, not its setup.sh script. Remove redundant "rm"
invocations from setup.sh scripts. Move required "rm" invocations from
setup.sh scripts to their corresponding clean.sh scripts.
If dots are not escaped in the "1.2.3.4" regular expressions used for
checking whether IP address 1.2.3.4 is present in the tested resolver's
answers, a COOKIE that matches such a regular expression will trigger a
false positive for the "resolver" system test. Properly escape dots in
the aforementioned regular expressions to prevent that from happening.
(cherry picked from commit 70ae48e5cb)
in query_respond_any(), the assumption had previously been made that it
was impossible to get past iterating the node with a return value of
ISC_R_NOMORE but not have found any records, unless we were searching
for RRSIG or SIG. however, it is possible for other types to exist but
be hidden, such as when the zone is transitioning from insecure to
secure and DNSSEC types are encountered, and this situation could
trigger an assertion. removed the assertion and reorganized the code.
(cherry picked from commit 3e74c7e5ff)
Including $SYSTEMTESTTOP/conf.sh from a system test's clean.sh script is
not needed for anything while it causes an error message to be printed
out when "./configure" is run, as "make clean" is invoked at the end.
Remove the offending line to prevent the error from occurring.
(cherry picked from commit 6602848460)
For all system tests utilizing named instances, call clean.sh from each
test's setup.sh script in a consistent way to make sure running the same
system test multiple times using run.sh does not trigger false positives
caused by stale files created by previous runs.
Ideally we would just call clean.sh from run.sh, but that would break
some quirky system tests like "rpz" or "rpzrecurse" and being consistent
for the time being does not hurt.
(cherry picked from commit a077a3ae8a)
In case when a zone fails to load because the file does not exist
or is malformed, we should not run the callback that updates the
zone database when the load is done. This is achieved by
unregistering the callbacks if at zone load end if the result
indicates something else than success.
As pointed out in !813 db_registered is sort of redundant. It is
set to `true` only in `dns_zone_rpz_enable_db()` right before the
`dns_rpz_dbupdate_callback()` callback is registered. It is only
required in that callback and it is the only place that the callback
is registered. Therefore there is no path that that `REQUIRE` can
fail.
The `db_registered` variable is only set to `false` in
`dns_rpz_new_zone`, so it is not like the variable is unset again
later.
The only other place where `db_registered` is checked is in
`rpz_detach()`. If `true`, it will call
`dns_db_updatenotify_unregister()`. However if that happens, the
`db_registered` is not set back to `false` thus this implies that
this may happen multiple times. If called a second time, most
likely the unregister function will return `ISC_R_NOTFOUND`, but
the return value is not checked anyway. So it can do without the
`db_registered` check.
This may happen when loading an RPZ failed and the code path skips
calling dns_db_endload(). The dns_rpz_zone_t object is still kept
marked as having registered db. So when this object is finally
destroyed in rpz_detach(), this code will incorrectly call
`dns_db_updatenotify_unregister()`:
if (rpz->db_registered)
dns_db_updatenotify_unregister(rpz->db,
dns_rpz_dbupdate_callback, rpz);
and trigger this assertion failure:
REQUIRE(db != NULL);
To fix this, only call `dns_db_updatenotify_unregister()` when
`rpz->db` is not NULL.
These tests check if a key with an unsupported algorithm in
managed-keys is ignored and when seeing an algorithm rollover to
an unsupported algorithm, the new key will be ignored too.
If `dns_dnssec_keyfromrdata` failed we don't need to call
`dst_key_free` because no `dstkey` was created. Doing so
nevertheless will result in an assertion failure.
This can happen if the key uses an unsupported algorithm.
removed the SDB databases in contrib/sdb as they hadn't been
maintained in some time, and were no longer able to link to named
without modification. also:
- cleaned up contrib/README, which still referred to contrib
subdirectores that were removed already, and linked to an obsolete URL.
- removed references to sdb in doc/misc/roadmap and doc/misc/sdb.
Illustrate the syntax for the policy options, with semicolons.
Explicitly mention the "default" policy.
Fix a few typos and remove some redundant wording.
When a mirror zone is verified, the 'ignore_kskflag' argument passed to
dns_zoneverify_dnssec() is set to false. This means that in order for
its verification to succeed, a mirror zone needs to have at least one
key with the SEP bit set configured as a trust anchor. This brings no
security benefit and prevents zones signed only using keys without the
SEP bit set from being mirrored, so change the value of the
'ignore_kskflag' argument passed to dns_zoneverify_dnssec() to true.
The "mirror" system test checks whether log messages announcing a mirror
zone coming into effect are emitted properly. However, the helper
functions responsible for waiting for zone transfers and zone loading to
complete do not wait for these exact log messages, but rather for other
ones preceding them, which introduces a possibility of false positives.
This problem cannot be addressed by just changing the log message to
look for because the test still needs to discern between transferring a
zone and loading a zone.
Add two new log messages at debug level 99 (which is what named
instances used in system tests are configured with) that are to be
emitted after the log messages announcing a mirror zone coming into
effect. Tweak the aforementioned helper functions to only return once
the log messages they originally looked for are followed by the newly
added log messages. This reliably prevents races when looking for
"mirror zone is now in use" log messages and also enables a workaround
previously put into place in the "mirror" system test to be reverted.
In the "mirror" system test, ns3 periodically sends trust anchor
telemetry queries to ns1 and ns2. It may thus happen that for some
non-recursive queries for names inside mirror zones which are not yet
loaded, ns3 will be able to synthesize a negative answer from the cached
records it obtained from trust anchor telemetry responses. In such
cases, NXDOMAIN responses will be sent with the root zone SOA in the
AUTHORITY section. Since the root zone used in the "mirror" system test
has the same serial number as ns2/verify.db.in and zone verification
checks look for the specified serial numbers anywhere in the answer, the
test could be broken if different zone names were used.
The +noauth dig option could be used to address this weakness, but that
would prevent entire responses from being stored for later inspection,
which in turn would hamper troubleshooting test failures. Instead, use
a different serial number for ns2/verify.db.in than for any other zone
used in the "mirror" system test and check the number of records in the
ANSWER section of each response.
Due to the way the "mirror" system test is set up, it is impossible for
the "verify-unsigned" and "verify-untrusted" zones to contain any serial
number other than the original one present in ns2/verify.db.in. Thus,
using presence of a different serial number in the SOA records of these
zones as an indicator of problems with mirror zone verification is
wrong. Look for the original zone serial number instead as that is the
one that will be returned by ns3 if one of the aforementioned zones is
successfully verified.
Add a warning about potential performance implications of configuring a
non-root zone as a mirror zone. Explain in more detail how each mirror
zone version is validated and how validation failures are handled. Move
the paragraphs describing how to set up IANA root zone mirroring higher
up, so that they can be more easily found by the reader. Explicitly
state that the "masters" option needs to be present for any mirror zone
which is not the root zone. Tweak the description of the interaction
between the "dnssec-validation" setting and root zone mirroring to make
it less ambiguous. Specify what the default "notify" setting is for
mirror zones.
* Alphabetize the option lists in the man page and help text
* Make the synopses more consistent between the man page and help
text, in particular the number of different modes
* Group mutually exclusive options in the man page synopses, and order
options so that it is more clear which are available in every mode
* Expand the DESCRIPTION to provide an overview of the output modes
and input modes
* Improve cross-references between options
* Leave RFC citations to the SEE ALSO section, and clarify which RFC
specifies what
* Clarify list of digest algorithms in dnssec-dsfromkey and dnssec-cds
man pages
Running "make install" in a separate job in the "test" phase of a CI
pipeline causes a lot of object files to be rebuilt due to the way
artifacts are passed between GitLab CI jobs (object files extracted from
the artifacts archive have older modification times than their
respective source files checked out using Git by the worker running the
"install" job). Test "make install" in one of the build jobs instead,
in order to prevent object rebuilding.
Using 'after_script' for this purpose was not an option because its
failures are ignored.
Duplicating the build script in two places would be error-prone in the
long run and thus was rejected as a solution. YAML anchors would also
not help in this case.
A "positive" test (`test -n "${RUN_MAKE_INSTALL}" && make install`)
would not work because:
- it would cause the build script to fail for any job not supposed to
run "make install",
- appending `|| :` to the shell pipeline would prevent "make install"
errors from causing a job failure.
Due to the above, a "negative" test is performed, so that:
- jobs not supposed to run "make install" succeed immediately,
- jobs supposed to run "make install" only succeed when "make install"
succeeds.
5153. [func] Zone transfer statistics (size, number of records, and
number of messages) are now logged for outgoing
transfers as well as incoming ones. [GL #513]
Ensure IXFR statistics are calculated correctly by dig and named, both
for incoming and outgoing transfers. Disable EDNS when using dig to
request an IXFR so that the same reference file can be used for testing
statistics calculated by both dig and named (dig uses EDNS by default
when sending transfer requests, which affects the number of bytes
transferred).
Ensure AXFR statistics are calculated correctly by dig and named, both
for incoming and outgoing transfers. Rather than employing a zone which
is already used in the "xfer" system test, create a new one whose AXFR
form spans multiple TCP messages. Disable EDNS when using dig to
request an AXFR so that the same reference file can be used for testing
statistics calculated by both dig and named (dig uses EDNS by default
when sending transfer requests, which affects the number of bytes
transferred).
Transfer statistics are currently only reported for incoming transfers,
even though they are equally useful for outgoing transfers. Define a
separate structure for keeping track of the number of messages, records,
and bytes sent during each outgoing transfer, along with the time each
outgoing transfer took. Repurpose the 'nmsg' field of the xfrout_ctx_t
structure for tracking the number of messages actually sent, ensuring it
is only increased after isc_socket_send() indicates success. Report the
statistics gathered when an outgoing transfer completes.
The 'nmsg' field of the xfrout_ctx_t structure is an integer, even
though it is only ever compared against 0 (for tracking whether the
QUESTION section has already been sent to the client). Use a boolean
instead as it is more appropriate and also enables 'nmsg' to be
repurposed.
the occluded-key test creates both a KEY and a DNSKEY. the second
call to dnssec-keygen calls dns_dnssec_findmatchingkeys(), which causes
a spurious warning to be printed when it sees the type KEY record.
this should be fixed in dnssec.c, but the meantime this change silences
the warning by reversing the order in which the keys are created.
- there was a memory leak when using negotiated TSIG keys.
- TKEY responses could only be signed when using a newly negotiated
key; if an existent matching TSIG was found in in the keyring it
would not be used.
- options that were flagged as obsolete or not implemented in 9.0.0
are now flagged as "ancient", and are a fatal error
- the ARM has been updated to remove these, along with other
obsolete descriptions of BIND 8 behavior
- the log message for obsolete options explicitly recommends removal
This adds a test for rndc dumpdb to ensure the correct "stale
comment" is printed. It also adds a test for non-stale data to
ensure no "stale comment" is printed for active RRsets.
In addition, the serve-stale tests are hardened with more accurate
grep calls.
This change makes rndc dumpdb correctly print the "; stale" line.
It also provides extra information on how long this data may still
be served to clients (in other words how long the stale RRset may
still be used).
up until now, message->tsigkey could only be set during parsing
of the request, but gss-tsig allows one to be created afterward.
this commit adds a new flag to the message structure, `new_tsigkey`,
which indicates that in this case it's okay for `dns_message_settsigkey()`
to be run on a message after parsing, without hitting any assertions due
to the lack of a TSIG in the request. this allows us to keep the current
restriction in place generally, but add an exception for TKEY processing.
it's probably better to just remove the restriction entirely (see next
commit).
The introduced grep call checks whether there was a
response that has an answer and an additional record.
There should be only one in the nsupdate output that is
for the TKEY response.
The introduced grep call checks whether there was a
response that has an answer and an additional record.
There should be only one in the nsupdate output that is
for the TKEY response.
Resolve "--enable-querytrace has negative performance impact - update the documentation to say this"
Closes#766
See merge request isc-projects/bind9!1367
also:
- rearranged things a little, adding a "dependencies" section
- removed the documentation of 'enable-threads'. (this part of
the change should not be backported.)
- Change 5023 (present in BIND 9.13.3+) removed BIND's internal
implementation of the getifaddrs() function which was required for
iterating network interfaces on Solaris 10 as that system does not
support that function natively.
- As of January 2019, FreeBSD 10.x is neither supported upstream nor
regularly tested by ISC, so move it from the list of regularly tested
platforms to the "Best effort" section.
- Debian 10, OpenBSD 6.3, and Fedora 29 have been released and are now
tested regularly.
use a lame server configuration to force SERVFAILs instead of killing ns2.
this prevents test failures that occurred due to a different behavior of
the netowrking stack in windows.
test the average delay between notifies instead of the minimum delay;
this helps avoid unnecessary test failures on systems with bursty
network performance.
dig retries a TCP query when a server closes the connection prematurely.
However, dig's exit code remains unaffected even if the second attempt
to get a response also fails with the same error for the same lookup,
which should not be the case. Ensure the exit code is updated
appropriately when a retry triggered by a TCP EOF condition fails.
- mishandling of trailing dots caused bad behavior with the
root zone or names like "example.com."
- fixing this exposed an error in dnssec-coverage caused the
wrong return value if there were KSK errors but no ZSK errors
- incidentally silenced the dnssec-keygen output in the coverage
system test
- dig command had the @ parameter in the wrong place
- private-dnskey and private-cdnskey are queried in a separate
loop, which strips 'private-' from the name to determine the qtype
In an attempt to ensure that:
- all important changes to repository contents are tested,
- pipelines are not automatically created for every single push,
- some flexibility is allowed for corner cases,
change pipeline triggering settings so that:
- full build & test pipelines are only automatically created for merge
requests and tags (both for creation and updates),
- pipelines for other repository changes (e.g. pushes to arbitrary
branches) can only be created manually, using GitLab's web
interface,
- merging a merge request only causes jobs pushing the updated ARM to
GitLab Pages to be run (as semi-linear Git history is enforced and
thus testing a MR is identical to testing the target branch
post-merge in terms of code),
- repository synchronization does not trigger duplicate pipelines in
projects which are set as mirroring targets.
Make sure all jobs are named using the following pattern:
[<job-type>:]<build-type>:<system>:<architecture>
where specifying <job-type> is optional for "precheck" and "build" jobs.
This should make it easier to quickly recognize:
- what kind of actions are performed by each job,
- which BIND build flavor is used by each job,
- which operating system image is used by each job.
There is no need to build BIND binaries before building docs and thus
the job building the current version of the ARM can be moved to the
build stage of CI.
Remove the following from .gitlab-ci.yml:
- unused variable definitions,
- unused Docker image definitions,
- commands which have no effect,
- sections which were commented out.
If we try to fetch a record from cache and need to look into
hints database we assume that the resolver is not primed and
start dns_resolver_prime(). Priming query is supposed to return
NSes for "." in ANSWER section and glue records for them in
ADDITIONAL section, so that we can fill that info in 'regular'
cache and not use hints db anymore.
However, if we're using a forwarder the priming query goes through
it, and if it's configured to return minimal answers we won't get
the addresses of root servers in ADDITIONAL section. Since the
only records for root servers we have are in hints database we'll
try to prime the resolver with every single query.
This patch adds a DNS_FETCHOPT_NOFORWARD flag which avoids using
forwarders if possible (that is if we have forward-first policy).
Using this flag on priming fetch fixes the problem as we get the
proper glue. With forward-only policy the problem is non-existent,
as we'll never ask for root server addresses because we'll never
have a need to query them.
Also added a test to confirm priming queries are not forwarded.
go back to regular resolution. When this happens the fetch timer is
already running, and we might end up in a situation where we we create
a fetch for qname-minimized query and after that the timer is triggered
and the query is retried (fctx_try) - which causes relaunching of
qname-minimization fetch - and since we already have a qmin fetch
for this fctx - assertion failure.
This fix stops the timer when doing qname minimization - qmin fetch
internal timer should take care of all the possible timeouts.
Log a message if a mirror zone becomes unusable for the resolver (most
usually due to the zone's expiration timer firing). Ensure that
verification failures do not cause a mirror zone to be unloaded
(instead, its last successfully verified version should be served if it
is available).
Log a message when a mirror zone is successfully loaded from disk and
subsequently verified.
This could have been implemented in a simpler manner, e.g. by modifying
an earlier code branch inside zone_postload() which checks whether the
zone already has a database attached and calls attachdb() if it does
not, but that would cause the resulting logs to indicate that a mirror
zone comes into effect before the "loaded serial ..." message is logged,
which would be confusing.
Tweak some existing sed commands used in the "mirror" system test to
ensure that separate test cases comprising it do not break each other.
Log a message when a mirror zone is successfully transferred and
verified, but only if no database for that zone was yet loaded at the
time the transfer was initiated.
This could have been implemented in a simpler manner, e.g. by modifying
zone_replacedb(), but (due to the calling order of the functions
involved in finalizing a zone transfer) that would cause the resulting
logs to suggest that a mirror zone comes into effect before its transfer
is finished, which would be confusing given the nature of mirror zones
and the fact that no message is logged upon successful mirror zone
verification.
Once the dns_zone_replacedb() call in axfr_finalize() is made, it
becomes impossible to determine whether the transferred zone had a
database attached before the transfer was started. Thus, that check is
instead performed when the transfer context is first created and the
result of this check is passed around in a field of the transfer context
structure. If it turns out to be desired, the relevant log message is
then emitted just before the transfer context is freed.
Taking this approach means that the log message added by this commit is
not timed precisely, i.e. mirror zone data may be used before this
message is logged. However, that can only be fixed by logging the
message inside zone_replacedb(), which causes arguably more dire issues
discussed above.
dns_zone_isloaded() is not used to double-check that transferred zone
data was correctly loaded since the 'shutdown_result' field of the zone
transfer context will not be set to ISC_R_SUCCESS unless axfr_finalize()
succeeds (and that in turn will not happen unless dns_zone_replacedb()
succeeds).
The handling of class and view arguments was broken, because the code
didn't realise that next_token() would overwrite the class name when
it parsed the view name. The code was trying to implement a syntax
like `refresh [[class] view]`, but it was documented to have a syntax
like `refresh [class [view]]`. The latter is consistent with other rndc
commands, so that is how I have fixed it.
Before:
$ rndc managed-keys refresh in rec
rndc: 'managed-keys' failed: unknown class/type
unknown class 'rec'
After:
$ rndc managed-keys refresh in rec
refreshing managed keys for 'rec'
There were missing newlines in the output from `rndc managed-keys
refresh` and `rndc managed-keys destroy`.
Before:
$ rndc managed-keys refresh
refreshing managed keys for 'rec'refreshing managed keys for 'auth'
After:
$ rndc managed-keys refresh
refreshing managed keys for 'rec'
refreshing managed keys for 'auth'
- the checkprivate function in the dnssec test set ret=0, erasing
results from previous tests and making the test appear to have passed
when it shouldn't have
- checkprivate needed a delay loop to ensure there was time for all
private signing records to be updated before the test
Resolve "Large NSEC3 responses cause failure in adding records to ncache and, eventually, FORMERR (instead of NXDOMAIN)"
Closes#804
See merge request isc-projects/bind9!1295
Resolve "Large NSEC3 responses cause failure in adding records to ncache and, eventually, FORMERR (instead of NXDOMAIN)"
Closes#804
See merge request isc-projects/bind9!1298
When a query times out after a socket is created and associated with a
given dig_query_t structure, calling isc_socket_cancel() causes
connect_done() to be run, which in turn takes care of all necessary
cleanups. However, certain errors (e.g. get_address() returning
ISC_R_FAMILYNOSUPPORT) may prevent a TCP socket from being created in
the first place. Since force_timeout() may be used in code handling
such errors, connect_timeout() needs to properly clean up a TCP query
which is not associated with any socket. Call clear_query() from
connect_timeout() after attempting to send a TCP query to the next
available server if the timed out query does not have a socket
associated with it, in order to prevent dig from hanging indefinitely
due to the dig_query_t structure not being detached from its parent
dig_lookup_t structure.
When a query times out and another server is available for querying
within the same lookup, the timeout handler - connect_timeout() - is
responsible for sending the query to the next server. Extract the
relevant part of connect_timeout() to a separate function in order to
improve code readability.
Before commit c2ec022f57, using the "-b"
command line switch for dig did not disable use of the other address
family than the one to which the address supplied to that option
belonged to. Thus, bind9_getaddresses() could e.g. prepare an
isc_sockaddr_t structure for an IPv6 address when an IPv4 address has
been passed to the "-b" command line option. To avoid attempting the
impossible (e.g. querying an IPv6 address from a socket bound to an IPv4
address), a certain code block in send_tcp_connect() checked whether the
address family of the server to be queried was the same as the address
family of the socket set up for sending that query; if there was a
mismatch, that particular server address was skipped.
Commit c2ec022f57 made
bind9_getaddresses() fail upon an address family mismatch between the
address the hostname passed to it resolved to and the address supplied
to the "-b" command line option. Such failures were fatal to dig back
then.
Commit 7f65860391 made
bind9_getaddresses() failures non-fatal, but also ensured that a
get_address() failure in send_tcp_connect() still causes the given query
address to be skipped (and also made such failures trigger an early
return from send_tcp_connect()).
Summing up, the code block handling address family mismatches in
send_tcp_connect() has been redundant since commit
c2ec022f57. Remove it.
5122. [bug] In a "forward first;" configuration, a forwarder
timeout did not prevent that forwarder from being
queried again after falling back to full recursive
resolution. [GL #315]
Since following a delegation resets most fetch context state, address
marks (FCTX_ADDRINFO_MARK) set inside lib/dns/resolver.c are not
preserved when a delegation is followed. This is fine for full
recursive resolution but when named is configured with "forward first;"
and one of the specified forwarders times out, triggering a fallback to
full recursive resolution, that forwarder should no longer be consulted
at each delegation point subsequently reached within a given fetch
context.
Add a new badnstype_t enum value, badns_forwarder, and use it to mark a
forwarder as bad when it times out in a "forward first;" configuration.
Since the bad server list is not cleaned when a fetch context follows a
delegation, this prevents a forwarder from being queried again after
falling back to full recursive resolution. Yet, as each fetch context
maintains its own list of bad servers, this change does not cause a
forwarder timeout to prevent that forwarder from being used by other
fetch contexts.
dnssec-signzone should sign a zonefile that contains a DNSKEY record
with an unsupported algorithm. Current behavior is that it will
fail, hitting a fatal error. The fix detects unsupported algorithms
and will not try to add it to the keylist.
Also when determining the maximum iterations for NSEC3, don't take
into account DNSKEY records in the zonefile with an unsupported
algorithm.
Resolve "current version of cygwin grep causes tests to fail when grepping for end of line character"
Closes#782
See merge request isc-projects/bind9!1230
Resolve "[ISC-support #13767] NSEC3 typemap improperly includes DNSKEY RRset instead of ignoring it as out-of-zone"
Closes#742
See merge request isc-projects/bind9!1231
Add a new libisccfg function, cfg_pluginlist_foreach(), which allows an
arbitrary callback to be invoked for every "plugin" stanza present in a
configuration object. Use this function for both loading plugins and
checking their configuration in order to reduce duplication of
configuration processing code present in bin/named/server.c and
lib/bind9/check.c.
- "hook" is now used only for hook points and hook actions
- the "hook" statement in named.conf is now "plugin"
- ns_module and ns_modlist are now ns_plugin and ns_plugins
- ns_module_load is renamed ns_plugin_register
- the mandatory functions in plugin modules (hook_register,
hook_check, hook_version, hook_destroy) have been renamed
- use a per-view module list instead of global hook_modules
- create an 'instance' pointer when registering modules, store it in
the module structure, and use it as action_data when calling
hook functions - this enables multiple module instances to be set
up in parallel
- also some nomenclature changes and cleanup
- added some hook points that will be needed for a dns64 module later
- moved some code from the beginning of query_respond() to
the end of query_prepresponse(); this has no effect on functionality
but means we can have a hook point at the top of query_respond(),
which seems nicer
- compressed duplicated code into query_zerottl_refetch() function
- added a qctx->answered flag so that a module can prevent
query_addrrset() from being called from query_respond() when
it's already been called from the module.
- this is necessary because adding the same hook to multiple views
causes the ISC_LIST link value to become inconsistent; it isn't
noticeable when only one hook action is ever registered at a
given hook point, but it will break things when there are two.
- eliminate qctx->hookdata and client->hookflags.
- use a memory pool to allocate data blobs in the filter-aaaa module,
and associate them with the client address in a hash table
- instead of detaching the client in query_done(), mark it for deletion
and then call ns_client_detach() from qctx_destroy(); this ensures
that it will still exist when the QCTX_DESTROYED hook point is
reached.
- use a get_hooktab() function to determine the hook table.
- PROCESS_HOOK now jumps to a cleanup tag on failure
- add PROCESS_ALL_HOOKS in query.c, to run all hook functions at
a specified hook point without stopping. this is to be used for
intiialization and destruction functions that must run in every
module.
- 'result' is set in PROCESS_HOOK only when a hook function
interrupts processing.
- revised terminology: a "callback" is now a "hook action"
- remove unused NS_PROCESS_HOOK and NS_PROCESS_HOOK_VOID macros.
- added a 'hookdata' array to qctx to store pointers to up to
16 blobs of data which are allocated by modules as needed.
each module is assigned an ID number as it's loaded, and this
is the index into the hook data array. this is to be used for
holding persistent state between calls to a hook module for a
specific query.
- instead of using qctx->filter_aaaa, we now use qctx->hookdata.
(this was the last piece of filter-aaaa specific code outside the
module.)
- added hook points for qctx initialization and destruction. we get
a filter-aaaa data pointer from the mempool when initializing and
store it in the qctx->hookdata table; return to to the mempool
when destroying the qctx.
- link the view to the qctx so that detaching the client doesn't cause
hooks to fail
- added a qctx_destroy() function which must be called after qctx_init;
this calls the QCTX_DESTROY hook and detaches the view
- general cleanup and comments
- make some cfg-parsing functions global so they can be run
from filter-aaaa.so
- add filter-aaaa options to the hook module's parser
- mark filter-aaaa options in named.conf as obsolete, remove
from named and checkconf, and update the filter-aaaa test not to
use checkconf anymore
- remove filter-aaaa-related struct members from dns_view
- allow multiple "hook" statements at global or view level
- add "optional bracketed text" type for optional parameter list
- load hook module from specified path rather than hardcoded path
- add a hooktable pointer (and a callback for freeing it) to the
view structure
- change the hooktable functions so they no longer update ns__hook_table
by default, and modify PROCESS_HOOK so it uses the view hooktable, if
set, rather than ns__hook_table. (ns__hook_table is retained for
use by unit tests.)
- update the filter-aaaa system test to load filter-aaaa.so
- add a prereq script to check for dlopen support before running
the filter-aaaa system test
not yet done:
- configuration parameters are not being passed to the filter-aaaa
module; the filter-aaaa ACL and filter-aaaa-on-{v4,v6} settings are
still stored in dns_view
- temporary kluge! in this version, for testing purposes,
named always searches for a filter-aaaa module at /tmp/filter-aaaa.so.
this enables the filter-aaaa system test to run even though the
code to configure hooks in named.conf hasn't been written yet.
- filter-aaaa-on-v4, filter-aaaa-on-v6 and the filter-aaaa ACL are
still configured in the view as they were before, not in the hook.
- these formerly static helper functions have been moved into client.c
and made external so that they can be used in hook modules as well as
internally in libns: query_newrdataset, query_putrdataset,
query_newnamebuf, query_newname, query_getnamebuf, query_keepname,
query_releasename, query_newdbversion, query_findversion
- made query_recurse() and query_done() into public functions
ns_query_recurse() and ns_query_done() so they can be called from
modules.
- the goal of this change is for AAAA filtering to be fully contained
in the query logic, and implemented at discrete points that can be
replaced with hook callouts later on.
- the new code may be slightly less efficient than the old filter-aaaa
implementation, but maximum efficiency was never a priority for AAAA
filtering anyway.
- we now use the rdataset RENDERED attribute to indicate that an AAAA
rdataset should not be included when rendering the message. (this
flag was originally meant to indicate that an rdataset has already
been rendered and should not be repeated, but it can also be used to
prevent rendering in the first place.)
- the DNS_MESSAGERENDER_FILTER_AAAA, NS_CLIENTATTR_FILTER_AAAA,
and DNS_RDATASETGLUE_FILTERAAAA flags are all now unnecessary and
have been removed.
- the purpose of this change is allow for more well-defined hook points
to be available in the query processing logic. some functions that
formerly didn't have access to 'qctx' do now; this is needed because
'qctx' is what gets passed when calling a hook function.
- query_addrdataset() has been broken up into three separate functions
since it used to do three unrelated things, and what was formerly
query_addadditional() has been renamed query_additional_cb() for
clarity.
- client->filter_aaaa is now qctx->filter_aaaa. (later, it will be moved
into opaque storage in the qctx, for use by the filter-aaaa module.)
- cleaned up style and braces
- move hooks.h to public include directory
- ns_hooktable_init() initializes a hook table. if NULL is passed in, it
initializes the global hook table
- ns_hooktable_save() saves a pointer to the current global hook table.
- ns_hooktable_reset() replaces the global hook table with different
one
- ns_hook_add() adds hooks at specified hook points in a hook table (or
the global hook table if the specified table is NULL)
- load and unload functions support dlopen() of hook modules (this is
adapted from dyndb and not yet functional)
- began adding new hook points to query.c
We can remove this, because it is used in `strtodsdigest` but that
already no longer covers the algorithm name "GOST".
There is one more GOST reference in `bin/python/isc/checkds.py.in`
but that is used for presentation format and probably should stay.
(cherry picked from commit 57d44fbc628d3c7dafdd545f6b83dbdcdc39a986)
In the test the quota is set to 400, and softquota to 90%*400=360.
We first attach to quota, and then if we're above softquota we
drop the oldest client. With new socket code and taskmgr it's
parallel enough to create a race between multiple instances doing
'attach to quota' and then 'drop oldest client' - making number
of clients go over softquota. It's not a problem in real life, as
it's just soft quota.
If you have a catalog zone containing 10.in-addr.arpa and an
explicitly-configured version which overrides the catz version,
`named` used to log:
catz: error "success" while trying to add zone "10.in-addr.arpa"
After this patch it logs:
catz: zone "10.in-addr.arpa" is overridden by explicitly configured zone
Apply various fixes and tweaks to Python configuration logic implemented
in the "configure" script:
- Prevent PYTHON_INSTALL_DIR, which holds the value passed to the
--with-python-install-dir option, from being set to "unspec" by
default as this breaks installing Python modules when the
--with-python-install-dir option is not used.
- Make the --with-python-install-dir option also work when the Python
interpreter is specified explicitly (using --with-python=<...>).
- Remove dnspython dependency which was erroneously introduced in
commit 31b0dc1f20: no installed Python
module depends on dnspython, it is only used in system tests, for
which dedicated scripts exist that check whether dnspython is
available and act accordingly.
- Improve contents and placement of error messages.
- Reduce duplication of code checking Python dependencies.
- Use Autoconf macros AS_CASE() and AS_IF() instead of plain shell
code.
- Update comments. Capitalize the word "Python" when referring to the
language itself rather than a specific executable.
The stock toolchain available on CentOS 6 for i386 is unable to use the
_mm_pause() intrinsic. Fix by using "rep; nop" assembly instructions on
that platform instead.
If we know that we'll have a task pool doing specific thing it's better
to use this knowledge and bind tasks to task queues, this behaves better
than randomly choosing the task queue.
- use bound resolver tasks - we have a pool of tasks doing resolutions,
we can spread the load evenly using isc_task_create_bound
- quantum set universally to 25
Mutexes are slower if they're in the same cache line. Since
fd's come in herds, and usually our listen sockets will have nearby
fd numbers, we mangle fdlocks so that the locks are further away.
Sometimes it is useful to set a 'floor' on the TTL for records
to be cached. Some sites like to use ridiculously low TTLs for
some reason, and that often is not compatible with slow links.
Signed-off-by: Michael Milligan <milli@acmeps.com>
Signed-off-by: LaMont Jones <lamont@debian.org>
5089. [bug] Restore localhost fallback in dig and host which is
used when no nameserver addresses present in
/etc/resolv.conf are usable due to the requested
address family restrictions. [GL #433]
In BIND 9.11 and earlier, dig and similar tools used liblwres for
parsing /etc/resolv.conf. After getting a list of servers from
liblwres, a tool would check the address family of each server found and
reject those unusable. When the resulting list of usable servers was
empty, localhost addresses were queried as a fallback.
When liblwres was removed in BIND 9.12, dig and similar tools were
updated to parse /etc/resolv.conf using libirs instead. As part of that
process, the localhost fallback was removed from bin/dig/dighost.c since
the localhost fallback built into libirs was deemed to be sufficient.
However, libirs only falls back to localhost if it does not find any
name servers at all; if it does find any valid nameserver entry in
/etc/resolv.conf, it just returns it to the caller because it is
oblivious to whether the caller supports IPv4 and/or IPv6 or not. The
code in bin/dig/dighost.c subsequently filters the returned list of
servers in get_server_list() according to the requested address family
restrictions. This may result in none of the addresses returned by
libirs being usable, in which case a tool will attempt to work with an
empty server list, causing a hang and subsequently a crash upon user
interruption.
Restore the localhost fallback in bin/dig/dighost.c to prevent the
aforementioned hangs and crashes and ensure recent BIND versions behave
identically to the older ones in the circumstances described above.
If a tool using the routines defined in bin/dig/dighost.c is sent an
interruption signal around the time a connection timeout is scheduled to
fire, connect_timeout() may be executed after destroy_libs() detaches
from the global task (setting 'global_task' to NULL), which results in a
crash upon a UDP retry due to bringup_timer() attempting to create a
timer with 'task' set to NULL. Fix by preventing connect_timeout() from
attempting a retry when shutdown is in progress.
Resolve "Follow-up from "Redefine ISC's int and boolean types to use <stdint.h> and <stdbool.h> types""
Closes#449
See merge request isc-projects/bind9!998
While implementing the new unit testing framework cmocka, it was found that the
BIND 9 code doesn't compile when assertions are disabled or replaced with any
function (such as mock_assert() from cmocka unit testing framework) that's not
directly recognized as assertion by the compiler.
This made the compiler to complain about blocks of code that was recognized as
unreachable before, but now it isn't.
The changes in this commit include:
* assigns default values to couple of local variables,
* moves some return statements around INSIST assertions,
* adds __builtin_unreachable(); annotations after some INSIST assertions,
* fixes one broken assertion (= instead of ==)
Tell the user explicitly about their mistakes:
* Unknown options, e.g. -list instead of -dump
or -delete instead of -remove.
* Unknown view names.
* Excess arguments.
Include the view name in `rndc nta -dump` output, for consistency with
the NTA add and remove actions.
When removing an NTA from all views, do not abort with an error if the
NTA was not found in one of the views.
At the beginning of qname minimization we get fctx->finds filled with what's
in the cache at this point, in worst case root servers. After doing full
run querying for NSes at different levels we need to clean it and refill
it with proper values from cache.
Ensure that serve-stale works as expected when returning stale answers
is enabled, the authoritative server does not respond, and there is no
cached answer available.
Remove the following functions in order to simplify socket code:
- isc_socket_recvv()
- isc_socket_sendtov()
- isc_socket_sendtov2()
- isc_socket_sendv()
Remove the following functions in order to simplify socket code:
- isc_socket_recvv()
- isc_socket_sendtov()
- isc_socket_sendtov2()
- isc_socket_sendv()
Refactor diagnostic tools code to no longer use:
- isc_socket_recvv()
- isc_socket_sendtov2()
- isc_socket_sendv()
as these functions will be removed shortly.
While isc_buffer_copyregion() calls isc_buffer_reserve() to ensure the
target buffer will have enough available space to append the contents of
the source region to it, the variables used for subsequently checking
available space are not updated accordingly after that call. This
prevents isc_buffer_copyregion() from working as expected for
auto-reallocated buffers: ISC_R_NOSPACE will be returned if enough space
is not already available in the target buffer before it is reallocated.
Fix by calling isc_buffer_used() and isc_buffer_availablelength()
directly instead of assigning their return values to local variables.
Add some basic checks for isc_buffer_copyregion() to ensure it behaves
as expected for both fixed-size buffers and buffers which can be
automatically reallocated. Adjust the list of headers included by
lib/isc/tests/buffer_test.c so that it matches what that test program
really uses.
If an RPZ zone is to be freed during an update, canceling the
update_quantum() event is not enough because the resources released when
an update completes also need to be accounted for. Failure to do this
results in a hang upon shutdown. Fix by copying cleanup code from the
end of update_quantum() to rpz_detach().
If another RPZ update is pending when processing the previous one nears
completion and min-update-interval is set to 0, isc_timer_reset() gets
called with 'interval' set to 0, which triggers an assertion failure.
To prevent such a scenario from causing a crash, queue the update event
directly instead of asking the timer thread to do it.
Rationale: the nonce here is only used to make sure there is a low
probability of duplication, according to section B.2 of RFC7873.
It is only 32-bit, and even if an attacker knows the algorithm used
to generate nonces it won't, in any way, give him any platform to
attack the server as long as server secret used to sign the
(nonce, time) pair with HMAC-SHA1 is secure.
On the other hand, currently, each packet sent requires (unnecessarily)
a CS pseudo-random number which is ineffective.
The XSL stylesheet used by the web interface does not currently include
any element which would cause a list of zones configured in each view to
be displayed, making the "Zones" section of the web interface empty
unless some zone has been configured with "zone-statistics full;" and
queried. Since this can be confusing, modify the XSL stylesheet so that
a list of zones configured in each view is displayed in the web
interface.
XXXX. [func] Replace old message digest and hmac APIs with more
generic isc_md and isc_hmac APIs, and convert their
respective tests to cmocka. [GL #305]
XXXX. [func] A default list of primary servers for the root zone is
now built into named, allowing the "masters" statement
to be omitted when configuring an IANA root zone
mirror. [GL #564]
XXXX. [func] Attempts to use mirror zones with recursion disabled
are now considered a configuration error. [GL #564]
XXXX. [func] The only valid zone-level NOTIFY settings for mirror
zones are now "notify no;" and "notify explicit;".
[GL #564]
XXXX. [func] Mirror zones are now configured using "type mirror;"
rather than "mirror yes;". [GL #564]
To minimize the effort required to set up IANA root zone mirroring,
define a default master server list for the root zone and use it when
that zone is to be mirrored and no master server list was explicitly
specified. Contents of that list are taken from RFC 7706 and are
subject to change in future releases.
Since the static get_masters_def() function in bin/named/config.c does
exactly what named_zone_configure() in bin/named/zoneconf.c needs to do,
make the former non-static and use it in the latter to prevent code
duplication.
Since mirror zone data is treated as cache data for access control
purposes, configuring a mirror zone and disabling recursion at the same
time would effectively prevent mirror zone data from being used since
disabling recursion also disables cache access to all clients by
default. Even though this behavior can be inhibited by configuration,
mirror zones are a recursive resolver feature and thus recursion is now
required to use them.
Ignore the fact that certain configurations might still trick named into
assuming recursion is enabled when it effectively is not since this
change is not meant to put a hard policy in place but rather just to
prevent accidental mirror zone misuse.
Previous way of handling NOTIFY settings for mirror zones was a bit
tricky: any value of the "notify" option was accepted, but it was
subsequently overridden with dns_notifytype_explicit. Given the way
zone configuration is performed, this resulted in the following
behavior:
- if "notify yes;" was set explicitly at any configuration level or
inherited from default configuration, it was silently changed and so
only hosts specified in "also-notify", if any, were notified,
- if "notify no;" was set at any configuration level, it was
effectively honored since even though zone->notifytype was silently
set to dns_notifytype_explicit, the "also-notify" option was never
processed due to "notify no;" being set.
Effectively, this only allowed the hosts specified in "also-notify" to
be notified, when either "notify yes;" or "notify explicit;" was
explicitly set or inherited from default configuration.
Clean up handling of NOTIFY settings for mirror zones by:
- reporting a configuration error when anything else than "notify no;"
or "notify explicit;" is set for a mirror zone at the zone level,
- overriding inherited "notify yes;" setting with "notify explicit;"
for mirror zones,
- informing the user when the "notify" setting is overridden, unless
the setting in question was inherited from default configuration.
Use a zone's 'type' field instead of the value of its DNS_ZONEOPT_MIRROR
option for checking whether it is a mirror zone. This makes said zone
option and its associated helper function, dns_zone_mirror(), redundant,
so remove them. Remove a check specific to mirror zones from
named_zone_reusable() since another check in that function ensures that
changing a zone's type prevents it from being reused during
reconfiguration.
Rather than overloading dns_zone_slave and discerning between a slave
zone and a mirror zone using a zone option, define a separate enum
value, dns_zone_mirror, to be used exclusively by mirror zones. Update
code handling slave zones to ensure it also handles mirror zones where
applicable.
Add a new zone type, CFG_ZONE_MIRROR, to libisccfg, in order to limit
the list of options which are considered valid for mirror zones. Update
the relevant configuration checks.
Contrary to what the documentation states, the "server-addresses"
static-stub zone option does not accept custom port numbers. Fix the
configuration type used by the "server-addresses" option to ensure
documentation matches source code. Remove a check_zoneconf() test which
is unnecessary with this fix in place.
Commonly used network configuration tools write scoped IPv6 nameserver
addresses to /etc/resolv.conf. libirs only handles these when it is
compiled with -DIRS_HAVE_SIN6_SCOPE_ID, which is not the default, and
only handles numeric scopes, which is not what network configuration
tools typically use. This causes dig to be practically unable to handle
scoped IPv6 nameserver addresses in /etc/resolv.conf.
Fix the problem by:
- not requiring a custom compile-time flag to be set in order for
scoped IPv6 addresses to be processed by getaddrinfo(),
- parsing non-numeric scope identifiers using if_nametoindex(),
- setting the sin6_scope_id field in struct sockaddr_in6 structures
returned by getaddrinfo() even if the AI_CANONNAME flag is not set.
Commit ba91243542 causes the resolver to
respond to a client query with FORMERR when all upstream queries sent to
the servers authoritative for QNAME elicit FORMERR responses. This
happens because resolver code returns DNS_R_FORMERR in such a case and
dns_result_torcode() acts as a pass-through for all arguments which are
already a valid RCODE.
The correct RCODE to set in the response returned to the client in the
case described above is SERVFAIL. Make sure this happens by overriding
the RCODE in query_gotanswer(), on the grounds that any format errors in
the client query itself should be caught long before execution reaches
that point. This change should not reduce query error logging accuracy
as the resolver code itself reports the exact reason for returning a
DNS_R_FORMERR result using log_formerr().
* Add configure option --enable-fips-mode that detects and enables FIPS mode
* Add a function to enable FIPS mode and call it on crypto init
* Log an OpenSSL error when FIPS_mode_set() fails and exit
* Report FIPS mode status in a separate log message from named
Whenever master or one for the v9_* branches gets updated, the current
ARM should be published on GitLab Pages. Add a pipeline stage which
takes care of triggering GitLab Pages pipelines. Extend the lifetime of
artifact archives containing the ARM to prevent GitLab Pages pipelines
from failing due to artifacts being unavailable.
Add a CI job which generates the HTML version of the ARM and makes it
available for download. Since this is expected to be a quick process,
the new job is enabled for all pipelines.
- this enables memory to be allocated and freed in dyndb modules
when named is linked statically. when we standardize on libtool,
this should become unnecessary.
- also, simplified the isc_mem_create/createx API by removing
extra compatibility functions
In some cases, setting qctx->result to DNS_R_SERVFAIL causes the value
of a 'result' variable containing a more specific failure reason to be
effectively discarded. This may cause certain query error log messages
to lack specificity despite a more accurate problem cause being
determined during query processing.
In other cases, qctx->result is set to DNS_R_SERVFAIL even though a more
specific error (e.g. ISC_R_NOMEMORY) could be explicitly indicated.
Since the response message's RCODE is derived from qctx->result using
dns_result_torcode(), which handles a number of possible isc_result_t
values and returns SERVFAIL for anything not explicitly listed, it is
fine to set qctx->result to something more specific than DNS_R_SERVFAIL
(in fact, this is already being done in a few cases). Modify most
QUERY_ERROR() calls so that qctx->result is set to a more specific error
code when possible. Adjust query_error() so that statistics are still
calculated properly. Remove the RECURSE_ERROR() macro which was
introduced exactly because qctx->result could be set to DNS_R_SERVFAIL
instead of DNS_R_DUPLICATE or DNS_R_DROP, which need special handling.
Modify dns_sdlz_putrr() so that it returns DNS_R_SERVFAIL when a DLZ
driver returns invalid RDATA, in order to prevent setting RCODE to
FORMERR (which is what dns_result_torcode() translates e.g. DNS_R_SYNTAX
to) while responding authoritatively.
When something goes wrong while recursing for an answer to a query,
query_gotanswer() sets a flag (qctx->want_stale) in the query context.
query_done() is subsequently called and it can either set up a stale
response lookup (if serve-stale is enabled) or conclude that a SERVFAIL
response should be sent. This may cause confusion when looking at query
error logs since the QUERY_ERROR() line responsible for setting the
response's RCODE to SERVFAIL is not in a catch-all branch of a switch
statement inside query_gotanswer() (like it is for authoritative
responses) but rather in a code branch which appears to have something
to do with serve-stale, even when the latter is not enabled.
Extract the part of query_done() responsible for checking serve-stale
configuration and optionally setting up a stale response lookup into a
separate function, query_usestale(), shifting the responsibility for
setting the response's RCODE to SERVFAIL to the same QUERY_ERROR() line
in query_gotanswer() which is evaluated for authoritative responses.
Manual page of host contained instructions to disable IDN processing
when it was built with libidn2. When refactoring IDN support however,
support for disabling IDN in host and nslookup was lost. Use also
environment variable and document it for nslookup, host and dig.
- tried to improve struct variable alignment
- ignore braces on function definitions so we can keep the existing
BIND style; braces can be on a new line or not
to update file, run: uncrustify --replace -c $TOP/.uncrustify.cfg <filename>
- note that if this is in the user's $HOME dir, it's the default
uncrustify config path name. this can be overridden with
'uncrustify -c filenaeme' or the UNCRUSTIFY_CONFIG environment
variable
- if dnssec-enable is no, then dnssec-validation now also defaults to
no. if dnssec-enable is yes, dnssec-validation defaults to auto or yes
depending on --disable-auto-validation.
- correct the doc
Revert parts of commit c3b8130fe8 which
inadvertently broke creating and validating EdDSA signatures:
1. EVP_DigestSignInit() returns 1 on success.
2. EdDSA does not support streaming (EVP_Digest*Update() followed by
EVP_Digest*Final()), only one shot operations.
Resolve "Make the chained delegations in reclimit behave like they would in a regular name server."
Closes#578
See merge request isc-projects/bind9!840
- update_log() is called to log update errors, but if those errors
occur before the zone is set (for example, when returning NOTAUTH)
it returns without logging anything.
Resolve "allow-recursion-on and allow-query-cache-on should default to each other if only one is set"
Closes#319
See merge request isc-projects/bind9!556
The race condition is the timer elapses before isc__timer_create()
returns the pointer to the caller. Assigning the return pointer before
enabling the timer will fix it.
Zone loading happens in a different task (zone->loadtask) than other
zone actions (zone->task). Thus, when zone_postload() is called in the
context of zone->loadtask, it may cause zone maintenance to be queued in
zone->task and another thread can then execute zone_maintenance() before
zone_postload() gets a chance to finish its work in the first thread.
This would not be a problem if zone_maintenance() accounted for this
possibility by locking the zone before checking the state of its
DNS_ZONEFLG_LOADPENDING flag. However, the zone is currently not locked
before the state of that flag is checked, which may prevent zone
maintenance from happening despite zone_postload() scheduling it. Fix
by locking the zone in zone_maintenance() before checking the state of
the zone's DNS_ZONEFLG_LOADPENDING flag.
- the text returned by "rndc nta" when adding NTAs to multiple views
was incorrectly terminated after the first line, so users only saw
on NTA added unless they checked the logs.
5031. [cleanup] Various defines in platform.h has been either dropped
if always or never triggered on supported platforms
or replaced with config.h equivalents if the defines
didn't have any impact on public headers. Workarounds
for LinuxThreads have been removed because NPTL is
available since Linux kernel 2.6.0.
- [ ] Compare content with merge requests for the release.
- [ ] Check formatting.
- [ ] Build documentation on docs.isc.org.
- [ ] Commit changes and make sure the gitlab-ci tests are passing.
- [ ] Push the changes and tag ("alphatag" is an optional string such as "b1", "rc1" etc.). (```git tag -u <DEVELOPER_KEYID> -a -s -m "BIND 9.X.Y[alphatag]" v9_X_Y[alphatag]```)
- [ ] If this is the first tag for a release (e.g. beta), create a release branch named `release_v9_X_Y` (this allows development to continue on the release branch whilst release engineering continues).
- [ ] (SwEng) Run the "make release" Jenkins job to produce the tarballs and zips.
- [ ] (SwEng) Ask QA to sanity check the tarball and zips (passing to them the number of the Jenkins job).
- [ ] (QA) Sanity check the tarballs.
- [ ] (QA) Request the signature on the tarballs.
- [ ] (QA) Check signatures on tarballs.
- [ ] (QA) Tell Support to handle notification of release.
- [ ] (Manager) Inform Marketing of the release
- [ ] (Manager) Update the internal [BIND release dates wiki page](https://wiki.isc.org/bin/view/Main/BindReleaseDates) when public announcement has been made.
- [ ] (SwEng) Update DEB and RPM packages
- [ ] (SwEng) Merge the automatically prepared `prep 9.X.Y` commit which updates `version` and documentation on the release branch into the relevant maintenance branch (`v9_X`)
## Support
- [ ] Make tarballs and signatures available to download.
- [ ] Write release email to bind9-announce.
- [ ] Write email to bind9-users (if a major release).
- [ ] Update tickets in case of waiting support customers.
## Marketing
- [ ] Post short note to Twitter.
- [ ] Update [Wikipedia entry for BIND](http://en.wikipedia.org/wiki/BIND).
OpenBSD, macOS, Solaris, OpenIndiana, OmniOS CE, HP-UX, and OpenWRT.
BIND requires a cryptography provider library such as OpenSSL or a
hardware service module supporting PKCS#11. On Linux, BIND requires
@@ -156,8 +211,8 @@ can be overridden by disabling capability support at compile time.
See [Compile-time options](#opts) below for details on other libraries
that may be required to support optional features.
BIND is also available for Windows 2008 and higher. See
`win32utils/readme1st.txt` for details on building for Windows
BIND is also available for Windows Server 2008 and higher. See
`win32utils/build.txt` for details on building for Windows
systems.
To build on a UNIX or Linux system, use:
@@ -179,44 +234,32 @@ affect compilation:
|`STD_CDEFINES`|Any additional preprocessor symbols you want defined. Defaults to empty string. For a list of possible settings, see the file [OPTIONS](OPTIONS.md).|
|`LDFLAGS`|Linker flags. Defaults to empty string.|
|`BUILD_CC`|Needed when cross-compiling: the native C compiler to use when building for the target system.|
|`BUILD_CFLAGS`|Optional, used for cross-compiling|
|`BUILD_CPPFLAGS`||
|`BUILD_LDFLAGS`||
|`BUILD_LIBS`||
|`BUILD_CFLAGS`|`CFLAGS` for the target system during cross-compiling.|
|`BUILD_CPPFLAGS`|`CPPFLAGS` for the target system during cross-compiling.|
|`BUILD_LDFLAGS`|`LDFLAGS` for the target system during cross-compiling.|
|`BUILD_LIBS`|`LIBS` for the target system during cross-compiling.|
#### <a name="macos"> macOS
Building on macOS assumes that the "Command Tools for Xcode" is installed.
This can be downloaded from https://developer.apple.com/download/more/
or if you have Xcode already installed you can run "xcode-select --install".
This will add /usr/include to the system and install the compiler and other
tools so that they can be easily found.
This can be downloaded from [https://developer.apple.com/download/more/](https://developer.apple.com/download/more/)
or if you have Xcode already installed you can run `xcode-select --install`.
### <a name="dependencies"/> Dependencies
Portions of BIND that are written in Python, including
`dnssec-keymgr`, `dnssec-coverage`, `dnssec-checkds`, and some of the
system tests, require the `argparse` and `ply` modules to be available.
`argparse` is a standard module as of Python 2.7 and Python 3.2.
`ply` is available from [https://pypi.python.org/pypi/ply](https://pypi.python.org/pypi/ply).
#### <a name="opts"/> Compile-time options
To see a full list of configuration options, run `configure --help`.
On most platforms, BIND 9 is built with multithreading support, allowing it
to take advantage of multiple CPUs. You can configure this by specifying
`--enable-threads` or `--disable-threads` on the `configure` command line.
The default is to enable threads, except on some older operating systems on
which threads are known to have had problems in the past. (Note: Prior to
BIND 9.10, the default was to disable threads on Linux systems; this has
now been reversed. On Linux systems, the threaded build is known to change
BIND's behavior with respect to file permissions; it may be necessary to
specify a user with the -u option when running `named`.)
To build shared libraries, specify `--with-libtool` on the `configure`
command line.
Certain compiled-in constants and default settings can be increased to
values better suited to large servers with abundant memory resources (e.g,
64-bit servers with 12G or more of memory) by specifying
`--with-tuning=large` on the `configure` command line. This can improve
performance on big servers, but will consume more memory and may degrade
performance on smaller systems.
For the server to support DNSSEC, you need to build it with crypto support.
To use OpenSSL, you should have OpenSSL 1.0.2e or newer installed. If the
OpenSSL library is installed in a nonstandard location, specify the prefix
@@ -226,14 +269,16 @@ path to the PKCS#11 provider library using `--with-pkcs11=<PREFIX>`, and
configure BIND with `--enable-native-pkcs11`.
To support the HTTP statistics channel, the server must be linked with at
least one of the following: libxml2
[http://xmlsoft.org](http://xmlsoft.org) or json-c
[https://github.com/json-c](https://github.com/json-c). If these are
installed at a nonstandard location, specify the prefix using
`--with-libxml2=/prefix` or `--with-libjson=/prefix`.
least one of the following libraries: `libxml2`
[http://xmlsoft.org](http://xmlsoft.org) or `json-c`
.\" Copyright (C) 2000-2011, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2011, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -74,7 +74,9 @@ will perform an NS query for "\&." (the root)\&.
It is possible to set per\-user defaults for
\fBdig\fR
via
${HOME}/\&.digrc\&. This file is read and any options in it are applied before the command line arguments\&.
${HOME}/\&.digrc\&. This file is read and any options in it are applied before the command line arguments\&. The
\fB\-r\fR
option disables this feature, for scripts that need predictable behaviour\&.
.PP
The IN and CH class names overlap with the IN and CH top level domain names\&. Either use the
\fB\-t\fR
@@ -174,11 +176,6 @@ reads a list of lookup requests to process from the given
using the command\-line interface\&.
.RE
.PP
\-i
.RS4
Do reverse IPv6 lookups using the obsolete RFC 1886 IP6\&.INT domain, which is no longer in use\&. Obsolete bit string label queries (RFC 2874) are not attempted\&.
.RE
.PP
\-k \fIkeyfile\fR
.RS4
Sign queries using TSIG using a key read from the given file\&. Key files can be generated using
@@ -208,6 +205,12 @@ The domain name to query\&. This is useful to distinguish the
from other arguments\&.
.RE
.PP
\-r
.RS4
Do not read options from
${HOME}/\&.digrc\&. This is useful for scripts that need predictable behaviour\&.
.RE
.PP
\-t \fItype\fR
.RS4
The resource record type to query\&. It can be any valid query type\&. If it is a resource record type supported in BIND 9, it can be given by the type mnemonic (such as "NS" or "AAAA")\&. The default query type is "A", unless the
@@ -246,9 +249,7 @@ arguments\&.
\fBdig\fR
automatically performs a lookup for a name like
94\&.2\&.0\&.192\&.in\-addr\&.arpa
and sets the query type and class to PTR and IN respectively\&. IPv6 addresses are looked up using nibble format under the IP6\&.ARPA domain (but see also the
\fB\-i\fR
option)\&.
and sets the query type and class to PTR and IN respectively\&. IPv6 addresses are looked up using nibble format under the IP6\&.ARPA domain\&.
.RE
.PP
\-y \fI[hmac:]\fR\fIkeyname:secret\fR
@@ -360,14 +361,20 @@ Display [do not display] the CLASS when printing the record\&.
.PP
\fB+[no]cmd\fR
.RS4
Toggles the printing of the initial comment in the output identifying the version of
Toggles the printing of the initial comment in the output, identifying the version of
\fBdig\fR
and the query options that have been applied\&. This comment is printed by default\&.
and the query options that have been applied\&. This option always has global effect; it cannot be set globally and then overridden on a per\-lookup basis\&. The default is to print this comment\&.
.RE
.PP
\fB+[no]comments\fR
.RS4
Toggle the display of comment lines in the output\&. The default is to print comments\&.
Toggles the display of some comment lines in the output, containing information about the packet header and OPT pseudosection, and the names of the response section\&. The default is to print these comments\&.
.sp
Other types of comments in the output are not affected by this option, but can be controlled using other command line switches\&. These include
\fB+[no]cmd\fR,
\fB+[no]question\fR,
\fB+[no]stats\fR, and
\fB+[no]rrcomments\fR\&.
.RE
.PP
\fB+[no]cookie\fR\fB[=####]\fR
@@ -468,12 +475,16 @@ option is enabled\&. If short form answers are requested, the default is not to
.PP
\fB+[no]idnin\fR
.RS4
Process [do not process] IDN domain names on input\&. This requires IDN SUPPORT to have been enabled at compile time\&. The default is to process IDN input\&.
Process [do not process] IDN domain names on input\&. This requires IDN SUPPORT to have been enabled at compile time\&.
.sp
The default is to process IDN input when standard output is a tty\&. The IDN processing on input is disabled when dig output is redirected to files, pipes, and other non\-tty file descriptors\&.
.RE
.PP
\fB+[no]idnout\fR
.RS4
Convert [do not convert] puny code on output\&. This requires IDN SUPPORT to have been enabled at compile time\&. The default is to convert output\&.
Convert [do not convert] puny code on output\&. This requires IDN SUPPORT to have been enabled at compile time\&.
.sp
The default is to process puny code on output when standard output is a tty\&. The puny code processing on output is disabled when dig output is redirected to files, pipes, and other non\-tty file descriptors\&.
.RE
.PP
\fB+[no]ignore\fR
@@ -556,12 +567,12 @@ would cause a 48\-byte query to be padded to 64 bytes\&. The default block size
.PP
\fB+[no]qr\fR
.RS4
Print [do not print] the query as it is sent\&. By default, the query is not printed\&.
Toggles the display of the query message as it is sent\&. By default, the query is not printed\&.
.RE
.PP
\fB+[no]question\fR
.RS4
Print [do not print] the question section of a query when an answer is returned\&. The default is to print the question section as a comment\&.
Toggles the display of the question section of a query when an answer is returned\&. The default is to print the question section as a comment\&.
.RE
.PP
\fB+[no]raflag\fR
@@ -579,11 +590,11 @@ A synonym for
.RS4
Toggle the setting of the RD (recursion desired) bit in the query\&. This bit is set by default, which means
\fBdig\fR
normally sends recursive queries\&. Recursion is automatically disabled when the
normally sends recursive queries\&. Recursion is automatically disabled when using the
\fI+nssearch\fR
or
option, and when using
\fI+trace\fR
query options are used\&.
except for an initial recursive query to get the list of root servers\&.
.RE
.PP
\fB+retry=T\fR
@@ -614,7 +625,7 @@ determines if the name will be treated as relative or not and hence whether a se
.PP
\fB+[no]short\fR
.RS4
Provide a terse answer\&. The default is to print the answer in a verbose form\&.
Provide a terse answer\&. The default is to print the answer in a verbose form\&. This option always has global effect; it cannot be set globally and then overridden on a per\-lookup basis\&.
.RE
.PP
\fB+[no]showsearch\fR
@@ -644,7 +655,7 @@ causes fields not to be split at all\&. The default is 56 characters, or 44 char
.PP
\fB+[no]stats\fR
.RS4
This query option toggles the printing of statistics: when the query was made, the size of the reply and so on\&. The default behavior is to print the query statistics\&.
Toggles the printing of statistics: when the query was made, the size of the reply and so on\&. The default behavior is to print the query statistics as a comment after each lookup\&.
.RE
.PP
\fB+[no]subnet=addr[/prefix\-length]\fR
@@ -795,7 +806,10 @@ has been built with IDN (internationalized domain name) support, it can accept a
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, use parameters
\fI+noidnin\fR
and
\fI+noidnout\fR\&.
\fI+noidnout\fR
or define the
\fBIDN_DISABLE\fR
environment variable\&.
.SH"FILES"
.PP
/etc/resolv\&.conf
@@ -816,5 +830,5 @@ There are probably too many query options\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH"COPYRIGHT"
.br
Copyright \(co 2000-2011, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2000-2011, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2002, 2004, 2005, 2007-2009, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2000-2002, 2004, 2005, 2007-2009, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -112,11 +112,6 @@ Print debugging traces\&. Equivalent to the
verbose option\&.
.RE
.PP
\-i
.RS4
Obsolete\&. Use the IP6\&.INT domain for reverse lookups of IPv6 addresses as defined in RFC1886 and deprecated in RFC4159\&. The default is to use IP6\&.ARPA as specified in RFC3596\&.
.RE
.PP
\-l
.RS4
List zone: The
@@ -257,7 +252,7 @@ If
\fBhost\fR
has been built with IDN (internationalized domain name) support, it can accept and display non\-ASCII domain names\&.
\fBhost\fR
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, defines the
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, define the
\fBIDN_DISABLE\fR
environment variable\&. The IDN support is disabled if the variable is set when
\fBhost\fR
@@ -274,5 +269,5 @@ runs\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH"COPYRIGHT"
.br
Copyright \(co 2000-2002, 2004, 2005, 2007-2009, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2000-2002, 2004, 2005, 2007-2009, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2004-2007, 2010, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2004-2007, 2010, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -277,6 +277,17 @@ Try the next nameserver if a nameserver responds with SERVFAIL or a referral (no
.PP
\fBnslookup\fR
returns with an exit status of 1 if any query failed, and 0 otherwise\&.
.SH"IDN SUPPORT"
.PP
If
\fBnslookup\fR
has been built with IDN (internationalized domain name) support, it can accept and display non\-ASCII domain names\&.
\fBnslookup\fR
appropriately converts character encoding of domain name before sending a request to DNS server or displaying a reply from the server\&. If you\*(Aqd like to turn off the IDN support for some reason, define the
\fBIDN_DISABLE\fR
environment variable\&. The IDN support is disabled if the variable is set when
\fBnslookup\fR
runs or when the standard output is not a tty\&.
.SH"FILES"
.PP
/etc/resolv\&.conf
@@ -290,5 +301,5 @@ returns with an exit status of 1 if any query failed, and 0 otherwise\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH"COPYRIGHT"
.br
Copyright \(co 2004-2007, 2010, 2013-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2004-2007, 2010, 2013-2019 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2017, 2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2017-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -102,7 +102,7 @@ Specify a digest algorithm to use when converting CDNSKEY records to DS records\
.sp
The
\fIalgorithm\fR
must be one of SHA\-1 (SHA1), SHA\-256 (SHA256), or SHA\-384 (SHA384)\&. These values are case insensitive\&. If no algorithm is specified, the default is SHA\-256\&.
must be one of SHA\-1, SHA\-256, or SHA\-384\&. These values are case insensitive, and the hyphen may be omitted\&. If no algorithm is specified, the default is SHA\-256\&.
.RE
.PP
\-c \fIclass\fR
@@ -293,5 +293,5 @@ RFC 7344\&.
.RE
.SH "COPYRIGHT"
.br
Copyright \(co 2017, 2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2017-2019 Internet Systems Consortium, Inc. ("ISC")
outputs the Delegation Signer (DS) resource record (RR), as defined in RFC 3658 and RFC 4509, for the given key(s)\&.
command outputs DS (Delegation Signer) resource records (RRs) and other similarly\-constructed RRs: with the
\fB\-l\fR
option it outputs DLV (DNSSEC Lookaside Validation) RRs; or with the
\fB\-C\fR
it outputs CDS (Child DS) RRs\&.
.PP
The input keys can be specified in a number of ways:
.PP
By default,
\fBdnssec\-dsfromkey\fR
reads a key file named like
Knnnn\&.+aaa+iiiii\&.key, as generated by
\fBdnssec\-keygen\fR\&.
.PP
With the
\fB\-f \fR\fB\fIfile\fR\fR
option,
\fBdnssec\-dsfromkey\fR
reads keys from a zone file or partial zone file (which can contain just the DNSKEY records)\&.
.PP
With the
\fB\-s\fR
option,
\fBdnssec\-dsfromkey\fR
reads a
keyset\-
file, as generated by
\fBdnssec\-keygen\fR\fB\-C\fR\&.
.SH "OPTIONS"
.PP
\-1
.RS 4
Use SHA\-1 as the digest algorithm (the default is to use both SHA\-1 and SHA\-256)\&.
An abbreviation for
\fB\-a SHA1\fR
.RE
.PP
\-2
.RS 4
Use SHA\-256 as the digest algorithm\&.
An abbreviation for
\fB\-a SHA\-256\fR
.RE
.PP
\-a \fIalgorithm\fR
.RS 4
Select the digest algorithm\&. The value of
\fBalgorithm\fR
must be one of SHA\-1 (SHA1), SHA\-256 (SHA256) or SHA\-384 (SHA384)\&. These values are case insensitive\&.
Specify a digest algorithm to use when converting DNSKEY records to DS records\&. This option can be repeated, so that multiple DS records are created for each DNSKEY record\&.
.sp
The
\fIalgorithm\fR
must be one of SHA\-1, SHA\-256, or SHA\-384\&. These values are case insensitive, and the hyphen may be omitted\&. If no algorithm is specified, the default is SHA\-256\&.
.RE
.PP
\-A
.RS 4
Include ZSKs when generating DS records\&. Without this option, only keys which have the KSK flag set will be converted to DS records and printed\&. Useful only in
\fB\-f\fR
zone file mode\&.
.RE
.PP
\-c \fIclass\fR
.RS 4
Specifies the DNS class (default is IN)\&. Useful only in
\fB\-s\fR
keyset or
\fB\-f\fR
zone file mode\&.
.RE
.PP
\-C
.RS 4
Generate CDS records rather than DS records\&. This is mutually exclusive with generating lookaside records\&.
.RE
.PP
\-T \fITTL\fR
.RS 4
Specifies the TTL of the DS records\&.
.RE
.PP
\-K \fIdirectory\fR
.RS 4
Look for key files (or, in keyset mode,
keyset\-
files) in
\fBdirectory\fR\&.
Generate CDS records rather than DS records\&. This is mutually exclusive with the
\fB\-l\fR
option for generating DLV records\&.
.RE
.PP
\-f \fIfile\fR
.RS 4
Zone file mode: in place of the keyfile name, the argument is the DNS domain name of a zone master file, which can be read from
Zone file mode:
\fBdnssec\-dsfromkey\fR\*(Aqs final
\fIdnsname\fR
argument is the DNS domain name of a zone whose master file can be read from
\fBfile\fR\&. If the zone name is the same as
\fBfile\fR, then it may be omitted\&.
.sp
If
\fBfile\fR
is set to
\fIfile\fR
is
"\-", then the zone data is read from the standard input\&. This makes it possible to use the output of the
Include ZSKs when generating DS records\&. Without this option, only keys which have the KSK flag set will be converted to DS records and printed\&. Useful only in zone file mode\&.
Prints usage information\&.
.RE
.PP
\-K \fIdirectory\fR
.RS 4
Look for key files or
keyset\-
files in
\fBdirectory\fR\&.
.RE
.PP
\-l \fIdomain\fR
.RS 4
Generate a DLV set instead of a DS set\&. The specified
\fBdomain\fR
is appended to the name for each record in the set\&. The DNSSEC Lookaside Validation (DLV) RR is described in RFC 4431\&. This is mutually exclusive with generating CDS records\&.
\fIdomain\fR
is appended to the name for each record in the set\&. This is mutually exclusive with the
\fB\-C\fR
option for generating CDS records\&.
.RE
.PP
\-s
.RS 4
Keyset mode: in place of the keyfile name, the argument is the DNS domain name of a keyset file\&.
Keyset mode:
\fBdnssec\-dsfromkey\fR\*(Aqs final
\fIdnsname\fR
argument is the DNS domain name used to locate a
keyset\-
file\&.
.RE
.PP
\-c \fIclass\fR
\-T \fITTL\fR
.RS 4
Specifies the DNS class (default is IN)\&. Useful only in keyset or zone file mode\&.
Specifies the TTL of the DS records\&. By default the TTL is omitted\&.
.RE
.PP
\-v \fIlevel\fR
@@ -128,11 +185,6 @@ Specifies the DNS class (default is IN)\&. Useful only in keyset or zone file mo
Sets the debugging level\&.
.RE
.PP
\-h
.RS 4
Prints usage information\&.
.RE
.PP
\-V
.RS 4
Prints version information\&.
@@ -141,16 +193,16 @@ Prints version information\&.
.PP
To build the SHA\-256 DS RR from the
\fBKexample\&.com\&.+003+26160\fR
keyfile name, the following command would be issued:
keyfile name, you can issue the following command:
.\" Copyright (C) 2008-2012, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2008-2012, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -55,7 +55,7 @@ of the key is specified on the command line\&. This must match the name of the z
.RS 4
Selects the cryptographic algorithm\&. The value of
\fBalgorithm\fR
must be one of RSAMD5, RSASHA1, DSA, NSEC3RSASHA1, NSEC3DSA, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&.
must be one of RSASHA1, NSEC3RSASHA1, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&.
.sp
If no algorithm is specified, then RSASHA1 will be used by default, unless the
\fB\-3\fR
@@ -63,9 +63,9 @@ option is specified, in which case NSEC3RSASHA1 will be used instead\&. (If
\fB\-3\fR
is used and an algorithm is specified, that algorithm will be checked for compatibility with NSEC3\&.)
.sp
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 or DSA is specified along with the
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 is specified along with the
\fB\-3\fR
option, then NSEC3RSASHA1 or NSEC3DSA will be used instead\&.
option, then NSEC3RSASHA1 will be used instead\&.
.sp
As of BIND 9\&.12\&.0, this option is mandatory except when using the
\fB\-S\fR
@@ -307,5 +307,5 @@ The PKCS#11 URI Scheme (draft\-pechanec\-pkcs11uri\-13)\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH "COPYRIGHT"
.br
Copyright \(co 2008-2012, 2014-2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2008-2012, 2014-2019 Internet Systems Consortium, Inc. ("ISC")
@@ -58,17 +58,24 @@ may be preferable to direct use of
\fBdnssec\-keygen\fR\&.
.SH "OPTIONS"
.PP
\-3
.RS 4
Use an NSEC3\-capable algorithm to generate a DNSSEC key\&. If this option is used with an algorithm that has both NSEC and NSEC3 versions, then the NSEC3 version will be used; for example,
\fBdnssec\-keygen \-3a RSASHA1\fR
specifies the NSEC3RSASHA1 algorithm\&.
.RE
.PP
\-a \fIalgorithm\fR
.RS 4
Selects the cryptographic algorithm\&. For DNSSEC keys, the value of
\fBalgorithm\fR
must be one of RSAMD5, RSASHA1, DSA, NSEC3RSASHA1, NSEC3DSA, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&. For TKEY, the value must be DH (Diffie Hellman); specifying his value will automatically set the
must be one of RSASHA1, NSEC3RSASHA1, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384, ED25519 or ED448\&. For TKEY, the value must be DH (Diffie Hellman); specifying his value will automatically set the
\fB\-T KEY\fR
option as well\&.
.sp
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 or DSA is specified along with the
These values are case insensitive\&. In some cases, abbreviations are supported, such as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384\&. If RSASHA1 is specified along with the
\fB\-3\fR
option, then NSEC3RSASHA1 or NSEC3DSA will be used instead\&.
option, then NSEC3RSASHA1 will be used instead\&.
.sp
This parameter
\fImust\fR
@@ -83,29 +90,15 @@ to generate TSIG keys\&.
.PP
\-b \fIkeysize\fR
.RS 4
Specifies the number of bits in the key\&. The choice of key size depends on the algorithm used\&. RSA keys must be between 1024 and 2048 bits\&. Diffie Hellman keys must be between 128 and 4096 bits\&. DSA keys must be between 512 and 1024 bits and an exact multiple of 64\&. HMAC keys must be between 1 and 512 bits\&. Elliptic curve algorithms don\*(Aqt need this parameter\&.
Specifies the number of bits in the key\&. The choice of key size depends on the algorithm used\&. RSA keys must be between 1024 and 4096 bits\&. Diffie Hellman keys must be between 128 and 4096 bits\&. Elliptic curve algorithms don\*(Aqt need this parameter\&.
.sp
If the key size is not specified, some algorithms have pre\-defined defaults\&. For example, RSA keys for use as DNSSEC zone signing keys have a default size of 1024 bits; RSA keys for use as key signing keys (KSKs, generated with
\fB\-f KSK\fR) default to 2048 bits\&.
.RE
.PP
\-n \fInametype\fR
.RS 4
Specifies the owner type of the key\&. The value of
\fBnametype\fR
must either be ZONE (for a DNSSEC zone key (KEY/DNSKEY)), HOST or ENTITY (for a key associated with a host (KEY)), USER (for a key associated with a user(KEY)) or OTHER (DNSKEY)\&. These values are case insensitive\&. Defaults to ZONE for DNSKEY generation\&.
.RE
.PP
\-3
.RS 4
Use an NSEC3\-capable algorithm to generate a DNSSEC key\&. If this option is used with an algorithm that has both NSEC and NSEC3 versions, then the NSEC3 version will be used; for example,
\fBdnssec\-keygen \-3a RSASHA1\fR
specifies the NSEC3RSASHA1 algorithm\&.
.RE
.PP
\-C
.RS 4
Compatibility mode: generates an old\-style key, without any metadata\&. By default,
Compatibility mode: generates an old\-style key, without any timing metadata\&. By default,
\fBdnssec\-keygen\fR
will include the key\*(Aqs creation date in the metadata stored with the private key, and other dates may be set there as well (publication date, activation date, etc)\&. Keys that include this data may be incompatible with older versions of BIND; the
\fB\-C\fR
@@ -150,11 +143,6 @@ Prints a short summary of the options and arguments to
Sets the directory in which the key files are to be written\&.
.RE
.PP
\-k
.RS 4
Deprecated in favor of \-T KEY\&.
.RE
.PP
\-L \fIttl\fR
.RS 4
Sets the default TTL to use for this key when it is converted into a DNSKEY RR\&. If the key is imported into a zone, this is the TTL that will be used for it, unless there was already a DNSKEY RRset in place, in which case the existing TTL would take precedence\&. If this value is not set and there is no existing DNSKEY RRset, the TTL will default to the SOA TTL\&. Setting the default TTL to
@@ -164,9 +152,17 @@ none
is the same as leaving it unset\&.
.RE
.PP
\-n \fInametype\fR
.RS 4
Specifies the owner type of the key\&. The value of
\fBnametype\fR
must either be ZONE (for a DNSSEC zone key (KEY/DNSKEY)), HOST or ENTITY (for a key associated with a host (KEY)), USER (for a key associated with a user(KEY)) or OTHER (DNSKEY)\&. These values are case insensitive\&. Defaults to ZONE for DNSKEY generation\&.
.RE
.PP
\-p \fIprotocol\fR
.RS 4
Sets the protocol value for the generated key\&. The protocol is a number between 0 and 255\&. The default is 3 (DNSSEC)\&. Other possible values for this argument are listed in RFC 2535 and its successors\&.
Sets the protocol value for the generated key, for use with
\fB\-T KEY\fR\&. The protocol is a number between 0 and 255\&. The default is 3 (DNSSEC)\&. Other possible values for this argument are listed in RFC 2535 and its successors\&.
.RE
.PP
\-q
@@ -193,27 +189,25 @@ Specifies the strength value of the key\&. The strength is a number between 0 an
Specifies the resource record type to use for the key\&.
\fBrrtype\fR
must be either DNSKEY or KEY\&. The default is DNSKEY when using a DNSSEC algorithm, but it can be overridden to KEY for use with SIG(0)\&.
Specifying any TSIG algorithm (HMAC\-* or DH) with
\fB\-a\fR
forces this option to KEY\&.
.RE
.PP
\-t \fItype\fR
.RS 4
Indicates the use of the key\&.
Indicates the use of the key, for use with
\fB\-T KEY\fR\&.
\fBtype\fR
must be one of AUTHCONF, NOAUTHCONF, NOAUTH, or NOCONF\&. The default is AUTHCONF\&. AUTH refers to the ability to authenticate data, and CONF the ability to encrypt data\&.
.RE
.PP
\-v \fIlevel\fR
.RS 4
Sets the debugging level\&.
.RE
.PP
\-V
.RS 4
Prints version information\&.
.RE
.PP
\-v \fIlevel\fR
.RS 4
Sets the debugging level\&.
.RE
.SH "TIMING OPTIONS"
.PP
Dates can be expressed in the format YYYYMMDD or YYYYMMDDHHMMSS\&. If the argument begins with a \*(Aq+\*(Aq or \*(Aq\-\*(Aq, it is interpreted as an offset from the present time\&. For convenience, if such an offset is followed by one of the suffixes \*(Aqy\*(Aq, \*(Aqmo\*(Aq, \*(Aqw\*(Aq, \*(Aqd\*(Aq, \*(Aqh\*(Aq, or \*(Aqmi\*(Aq, then the offset is computed in years (defined as 365 24\-hour days, ignoring leap years), months (defined as 30 24\-hour days), weeks, days, hours, or minutes, respectively\&. Without a suffix, the offset is computed in seconds\&. To explicitly prevent a date from being set, use \*(Aqnone\*(Aq or \*(Aqnever\*(Aq\&.
@@ -314,34 +308,39 @@ contains the private key\&.
.PP
The
\&.key
file contains a DNS KEY record that can be inserted into a zone file (directly or with a $INCLUDE statement)\&.
file contains a DNSKEY or KEY record\&. When a zone is being signed by
\fBnamed\fR
or
\fBdnssec\-signzone\fR\fB\-S\fR, DNSKEY records are included automatically\&. In other cases, the
\&.key
file can be inserted into a zone file manually or with a
\fB$INCLUDE\fR
statement\&.
.PP
The
\&.private
file contains algorithm\-specific fields\&. For obvious security reasons, this file does not have general read permission\&.
.PP
Both
\&.key
and
\&.private
files are generated for symmetric cryptography algorithms such as HMAC\-MD5, even though the public and private key are equivalent\&.
.SH "EXAMPLE"
.PP
To generate a 768\-bit DSA key for the domain
\fBexample\&.com\fR, the following command would be issued:
To generate an ECDSAP256SHA256 zone\-signing key for the zone
\fBexample\&.com\fR, issue the command:
.PP
\fBdnssec\-keygen \-a DSA \-b 768 \-n ZONE example\&.com\fR
.\" Copyright (C) 2012, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
.\" Copyright (C) 2012, 2014-2016, 2018, 2019 Internet Systems Consortium, Inc. ("ISC")
.\"
.\" This Source Code Form is subject to the terms of the Mozilla Public
.\" License, v. 2.0. If a copy of the MPL was not distributed with this
@@ -113,5 +113,5 @@ RFC 4033\&.
\fBInternet Systems Consortium, Inc\&.\fR
.SH "COPYRIGHT"
.br
Copyright \(co 2012, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
Copyright \(co 2012, 2014-2016, 2018, 2019 Internet Systems Consortium, Inc. ("ISC")
.br
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Evan Hunt
Tinderbox User
Mark AndrewsandEvan Hunt
Ondřej Surý
Ondřej Surý
Petr MenšíkandOndřej Surý
Michał Kępień
Michal Nowak
Matthijs Mekking
Sergei TrofimovichandOndřej Surý
Tony FinchandOndřej Surý
Witold Krecicki
Timothe LittandMark Andrews
Brian ConryandOndřej Surý
Stephen MorrisandMichał Kępień
Witold KręcickiandOndřej Surý
Curtis BlackburnandEvan Hunt
AlanandMark Andrews
Roland GruberandOndřej Surý
Andreas HasenackandMark Andrews
Håvard EidnesandOndřej Surý
JoeyandEvan Hunt
Zhaolong ZhangandMichał Kępień
Thomas JachandOndřej Surý
Vicky Risk