In HTTP/1.0 and HTTP/1.1, RFC 9112 section 9.6 says the last response
in a connection should include a `Connection: close` header, but the
statschannel server omitted it.
In an HTTP/1.0 response, the statschannel server can sometimes send a
`Connection: keep-alive` header when it is about to close the
connection. There are two ways:
If the first request on a connection is keep-alive and the second
request is not, then _both_ responses have `Connection: keep-alive`
but the connection is (correctly) closed after the second response.
If a single request contains
Connection: close
Connection: keep-alive
then RFC 9112 section 9.3 says the keep-alive header is ignored, but
the statschannel sends a spurious keep-alive in its response, though
it correctly closes the connection.
To fix these bugs, make it more clear that the `httpd->flags` are part
of the per-request-response state. The Connection: flags are now
described in terms of the effect they have instead of what causes them
to be set.
(manually picked from commit e18ca83a3b)
Pass 5 second timeout to the rndc status command(s) to avoid hitting the
hard 10 second timeout from subprocess.call, which would result in an
unwanted exception that would only mask the real issue: if the rndc
status times out in this test, it is likely due to the server not
stopping as it should.
(cherry picked from commit ceed694659)
The shutdown test attempts to shut down the server using two different
methods - rndc and sigterm. Use pytest.mark.parametrize to run these as
separate test cases for easier identification of failures.
(cherry picked from commit 603c58ee28)
Make the cds/setup.sh compatible with the workaround which relies on
testing the TSAN_OPTIONS variable which may not be set.
(cherry picked from commit 76d9873ef6)
Surround the variables which are checked whether they're executable in
double quotes. Without them, empty paths won't be properly interpreted
as not executable.
(manually picked from commit 06056c44a7)
Since delv can occasionally hang in system tests when running with TSAN
(see GL#4119), disable these tests as a workaround. Otherwise, the hung
delv process will just waste CI resources and prevent any meaningful
output from the rest of the test suite.
(cherry picked from commit fbcf37f914)
tsig-keygen is now used to generate key files for TSIG. These have
a different format to those that were generated by dnssec-keygen.
Test that dig can still read these files.
(cherry picked from commit c91a208ef5)
tsig-keygen generates key files that are different to those that
where generated by dnssec-keygen. Check that nsupdate can still
read those old format files.
(cherry picked from commit e1fb17e72c)
The ability to read legacy HMAC-MD5 K* keyfile pairs using algorithm
number 157 was accidentally lost when the algorithm numbers were
consolidated into a single block, in commit
09f7e0607a.
The assumption was that these algorithm numbers were only known
internally, but they were also used in key files. But since HMAC-MD5
got renumbered from 157 to 160, legacy HMAC-MD5 key files no longer
work.
Move HMAC-MD5 back to 157 and GSSAPI back to 160. Add exception for
GSSAPI to list_hmac_algorithms.
(cherry picked from commit 3f93d3f757)
When DNS_FETCHOPT_NOFOLLOW is set DNS_R_DELEGATION needs to be
returned to restart the resolution process rather than converting
it to ISC_R_SUCCESS.
(cherry picked from commit ea11650376)
If we know that the NS RRset for an intermediate label doesn't exist
on cache contents don't query using that name when looking for a
referral.
(cherry picked from commit 80bc0ee075)
There is no harm in aquiring an additional reference to the resolver
after it has started shutting down. All the REQUIRE was doing was
introducing a point of failure when shutting down the server.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
(cherry picked from commit 0b09ee8cdc)
If the resolver received a FORMERR response to a request with
an DNS COOKIE option present that echoes the option back, resend
the request without an DNS COOKIE option present.
(cherry picked from commit f3b24ba789)
Previously, the first check silently failed, as 450 is apparently (in
the CI setup) the minimum output size for the dnstap output, rather than
470 which the test was expecting. Effectively, the check served as a 5
second sleep rather than waiting for the proper file size.
Additionally, check the expected file sizes and fail if expectations
aren't met.
(manually picked from commit 5f809e50b6)
On main, the minimum file size seems to 454 bytes, while on EL7 in our
CI setup for the 9.18 branch, it appears to be 450 instead.
The log message is supposed to contain the zone name which was
erroneously omitted, but didn't pop up during tests, since return code
was silently ignored.
Now it actually waits for the proper log message rather than being an
equivalent of 3 second sleep (which was also sufficient to make the test
pass, thus we detected no failure).
(cherry picked from commit 1dd4c2b9e2)
Tasks can block for a long time, especially when used by tools in
interactive mode. Update the event loop's time to avoid unexpected
errors when processing later events during the same callback.
For example, newly started timers can fire too early, because the
current time was stale. See the note about uv_update_time() in the
https://docs.libuv.org/en/v1.x/timer.html#c.uv_timer_start page.
The isc_result_t enum was to sparse when each library code would skip to
next << 16 as a base. Remove the huge holes in the isc_result_t enum to
make the isc_result tables more compact.
This change required a rewrite how we map dns_rcode_t to isc_result_t
and back, so we don't ever return neither isc_result_t value nor
dns_rcode_t out of defined range.
(cherry picked from commit a8e6c3b8f7)
The mapping functions between isc_result_t and dns_rcode_t could return
both isc_result_t values not defined in the header and dns_rcode_t
values not defined in the header because it blindly maps anything
withing full 12-bits defined for RCODEs to isc_result_t and back.
Refactor the dns_result_{from,to}rcode() functions to always return
valid isc_result_t and dns_rcode_t values by explicitly mapping the
values to each other and returning DNS_R_SERVFAIL (dns_rcode_servfail)
when encountering value out of the defined range.
(cherry picked from commit b53d1d7069)
util/parse_tsan.py builds tables of mutexes, threads, and pointers it
finds in the TSAN report provided to it as a command-line argument and
then replaces all mentions of each of these entities so that they are
numbered sequentially in the processed report. For example, this line:
Cycle in lock order graph: M0 (...) => M5 (...) => M9 (...) => M0
is expected to become:
Cycle in lock order graph: M1 (...) => M2 (...) => M3 (...) => M1
Problems arise when the gaps between mutex/thread identifiers present on
a single line are smaller than the total number of mutexes/threads found
by the script so far. For example, the following line:
Cycle in lock order graph: M0 (...) => M1 (...) => M2 (...) => M0
first gets turned into:
Cycle in lock order graph: M1 (...) => M1 (...) => M2 (...) => M1
and then into:
Cycle in lock order graph: M2 (...) => M2 (...) => M2 (...) => M2
In other words, lines like this become garbled due to information loss.
The problem stems from the fact that the numbering scheme the script
uses for identifying mutexes and threads is exactly the same as the one
used by TSAN itself. Update util/parse_tsan.py so that it uses
zero-padded numbers instead, making the "overlapping" demonstrated above
impossible.
(cherry picked from commit 7f0790c82f)
Tom Krizek
Tony FinchandTom Krizek
Michał Kępień
Mark Andrews
Ondřej Surý
Evan Hunt
Michal Nowak
Arаm Sаrgsyаn