This commit is somewhat editorial as it does not introduce something
new nor fixes anything.
The layout in keymgr2kasp/tests.sh has been changed, with the
intention to make more clear where a test scenario ends and begins.
The publication time of some ZSKs has been changed. It makes a more
clear distinction between publication time and activation time.
(cherry picked from commit f6fa254256)
Add a script similar to conf.sh to include common functions and
variables for testing KASP. Currently used in kasp, keymgr2kasp, and
nsec3.
(cherry picked from commit ecb073bdd6)
The kasp system test was getting pretty large, and more tests are on
the way. Time to split up. Move tests that are related to migrating
to dnssec-policy to a separate directory 'keymgr2kasp'.
(cherry picked from commit 5389172111)
The TIME_NOW macro calls isc_time_now which uses CLOCK_REALTIME_COARSE
for getting the current time. This is perfectly fine for millisecond,
however when the user request microsecond resolutiuon, they are going
to get very inaccurate results. This is especially true on a server
class machine where the clock ticks may be set to 100HZ.
This changes dig to use the new TIME_NOW_HIRES macro that uses the
CLOCK_MONOTONIC_RAW that is more expensive, but gets the *actual*
current time rather than the at the last kernel time tick.
(cherry picked from commit 56cef1495f)
The current isc_time_now uses CLOCK_REALTIME_COARSE which only updates
on a timer tick. This clock is generally fine for millisecond accuracy,
but on servers with 100hz clocks, this clock is nowhere near accurate
enough for microsecond accuracy.
This commit adds a new isc_time_now_hires function that uses
CLOCK_REALTIME, which gives the current time, though it is somewhat
expensive to call. When microsecond accuracy is required, it may be
required to use extra resources for higher accuracy.
(cherry picked from commit ebced74b19)
The tlsdns API is not yet used in the 9.16 branch and the tlsdns_test
fails too often. Temporarily disable running the test until it is
actually needed.
The RFC7828 specifies the keepalive interval to be 16-bit, specified in
units of 100 milliseconds and the configuration options tcp-*-timeouts
are following the suit. The units of 100 milliseconds are very
unintuitive and while we can't change the configuration and presentation
format, we should not follow this weird unit in the API.
This commit changes the isc_nm_(get|set)timeouts() functions to work
with milliseconds and convert the values to milliseconds before passing
them to the function, not just internally.
The udp, tcpdns and tlsdns contained lot of cut&paste code or code that
was very similar making the stack harder to maintain as any change to
one would have to be copied to the the other protocols.
In this commit, we merge the common parts into the common functions
under isc__nm_<foo> namespace and just keep the little differences based
on the socket type.
After the TCPDNS refactoring the initial and idle timers were broken and
only the tcp-initial-timeout was always applied on the whole TCP
connection.
This broke any TCP connection that took longer than tcp-initial-timeout,
most often this would affect large zone AXFRs.
This commit changes the timeout logic in this way:
* On TCP connection accept the tcp-initial-timeout is applied
and the timer is started
* When we are processing and/or sending any DNS message the timer is
stopped
* When we stop processing all DNS messages, the tcp-idle-timeout
is applied and the timer is started again
The system tests were missing a test that would test tcp-initial-timeout
and tcp-idle-timeout.
This commit adds new "timeouts" system test that adds:
* Test that waits longer than tcp-initial-timeout and then checks
whether the socket was closed
* Test that sends and receives DNS message then waits longer than
tcp-initial-timeout but shorter time than tcp-idle-timeout than
sends DNS message again than waits longer than tcp-idle-timeout
and checks whether the socket was closed
* Similar test, but bursting 25 DNS messages than waiting longer than
tcp-initial-timeout and shorter than tcp-idle-timeout than do second
25 DNS message burst
* Check whether transfer longer than tcp-initial-timeout succeeds
Add a test for freezing, manually updating, and then thawing a dynamic
zone with "dnssec-policy". In the kasp system test we add parameters
to the "update_is_signed" check to signal the indicated IP addresses
for the labels "a" and "d". If set to '-', the test is skipped.
After nsupdating the dynamic.kasp zone, we revert the update (with
nsupdate) and update the zone again, but now with the freeze/thaw
approach.
(cherry picked from commit 0cae3249e3)
When thawing a zone, we don't know what changes have been made. If we
do DNSSEC maintenance on this zone, schedule a full sign.
(cherry picked from commit b90846f222)
Dynamic zones with dnssec-policy could not be thawed because KASP
zones were considered always dynamic. But a dynamic KASP zone should
also check whether updates are disabled.
(cherry picked from commit b518ed9f46)
when testing if interactive mode continues or not on
invalid hostname. We only need to detect that getaddrinfo
failed and that we continued or not.
(cherry picked from commit 25d1276170)
When we query the resolver for a domain name that is in the same zone
for which is already one or more fetches outstanding, we could
potentially hit the fetch limits. If so, recursion fails immediately
for the incoming query and if serve-stale is enabled, we may try to
return a stale answer.
If the resolver is also is authoritative for the parent zone (for
example the root zone), first a delegation is found, but we first
check the cache for a better response.
Nothing is found in the cache, so we try to recurse to find the
answer to the query.
Because of fetch-limits 'dns_resolver_createfetch()' returns an error,
which 'ns_query_recurse()' propagates to the caller,
'query_delegation_recurse()'.
Because serve-stale is enabled, 'query_usestale()' is called,
setting 'qctx->db' to the cache db, but leaving 'qctx->version'
untouched. Now 'query_lookup()' is called to search for stale data
in the cache database with a non-NULL 'qctx->version'
(which is set to a zone db version), and thus we hit an assertion
in rbtdb.
This crash was introduced in 'v9_16' by commit
2afaff75ed.
(cherry picked from commit 87591de6f7)
Commit 9fb6d11abb (which converted BIND 9
documentation from DocBook to Sphinx) inadvertently removed a paragraph
from the description of the "max-ixfr-ratio" option. Add the missing
paragraph back.
(cherry picked from commit 3878cf4ac5)
- use a value less than 2^32 for DNS_ZONEFLG_FIXJOURNAL; a larger value
could cause problems in some build environments. the zone flag
DNS_ZONEFLG_DIFFONRELOAD, which was no longer in use, has now been
deleted and its value reused for _FIXJOURNAL.
(cherry picked from commit 990dd9dbff)
*** CID 329157: Null pointer dereferences (REVERSE_INULL)
/lib/dns/journal.c: 754 in journal_open()
748 j->header.index_size * sizeof(journal_rawpos_t));
749 }
750 if (j->index != NULL) {
751 isc_mem_put(j->mctx, j->index,
752 j->header.index_size * sizeof(journal_pos_t));
753 }
CID 329157: Null pointer dereferences (REVERSE_INULL)
Null-checking "j->filename" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
754 if (j->filename != NULL) {
755 isc_mem_free(j->mctx, j->filename);
756 }
757 if (j->fp != NULL) {
758 (void)isc_stdio_close(j->fp);
759 }
(cherry picked from commit 4054405909)
