ComputerSurge/bind9
3
0
Fork 0
Code Pull Requests 1 Activity
Files
809d55226b7006b0b4e8159ce9934e27e9e762e1
bind9/bin/tests/system/dnssec/tests.sh
T
Mark Andrews 809d55226b Address race in dnssec system test. 'clear signing records' can fail 
as the update triggers by the rndc command to clear the signing records
may not have completed by the time the subsequent rndc command to test
that the records have been removed is commenced.  Loop several times to
prevent false negative.

(cherry picked from commit 353018c0e5)
2020-05-19 13:50:51 +10:00

4022 lines
152 KiB
Bash
Raw Blame History

#!/bin/sh
#
# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
#
# See the COPYRIGHT file distributed with this work for additional
# information regarding copyright ownership.
SYSTEMTESTTOP=..
. $SYSTEMTESTTOP/conf.sh
status=0
n=1
rm -f dig.out.*
DIGOPTS="+tcp +noadd +nosea +nostat +nocmd +dnssec -p ${PORT}"
ADDITIONALOPTS="+noall +additional +dnssec -p ${PORT}"
ANSWEROPTS="+noall +answer +dnssec -p ${PORT}"
DELVOPTS="-a ns1/trusted.conf -p ${PORT}"
RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s"
# TODO: Move wait_for_log and loadkeys_on to conf.sh.common
wait_for_log() {
msg=$1
file=$2
for i in 1 2 3 4 5 6 7 8 9 10; do
nextpart "$file" | grep "$msg" > /dev/null && return
sleep 1
done
echo_i "exceeded time limit waiting for '$msg' in $file"
ret=1
}
dnssec_loadkeys_on() {
nsidx=$1
zone=$2
nextpart ns${nsidx}/named.run > /dev/null
$RNDCCMD 10.53.0.${nsidx} loadkeys ${zone} | sed "s/^/ns${nsidx} /" | cat_i
wait_for_log "next key event" ns${nsidx}/named.run
}
# convert private-type records to readable form
showprivate () {
echo "-- $@ --"
$DIG $DIGOPTS +nodnssec +short @$2 -t type65534 $1 | cut -f3 -d' ' |
while read record; do
$PERL -e 'my $rdata = pack("H*", @ARGV[0]);
die "invalid record" unless length($rdata) == 5;
my ($alg, $key, $remove, $complete) = unpack("CnCC", $rdata);
my $action = "signing";
$action = "removing" if $remove;
my $state = " (incomplete)";
$state = " (complete)" if $complete;
print ("$action: alg: $alg, key: $key$state\n");' $record
done
}
# check that signing records are marked as complete
checkprivate () {
for i in 1 2 3 4 5 6 7 8 9 10; do
showprivate "$@" | grep -q incomplete || return 0
sleep 1
done
echo_d "$1 signing incomplete"
return 1
}
# check that a zone file is raw format, version 0
israw0 () {
cat $1 | $PERL -e 'binmode STDIN;
read(STDIN, $input, 8);
($style, $version) = unpack("NN", $input);
exit 1 if ($style != 2 || $version != 0);'
return $?
}
# check that a zone file is raw format, version 1
israw1 () {
cat $1 | $PERL -e 'binmode STDIN;
read(STDIN, $input, 8);
($style, $version) = unpack("NN", $input);
exit 1 if ($style != 2 || $version != 1);'
return $?
}
# strip NS and RRSIG NS from input
stripns () {
awk '($4 == "NS") || ($4 == "RRSIG" && $5 == "NS") { next} { print }' $1
}
#
# Ensure there is not multiple consecutive blank lines.
# Ensure there is a blank line before "Start view" and
# "Negative trust anchors:".
# Ensure there is not a blank line before "Secure roots:".
#
check_secroots_layout () {
tr -d '\r' < "$1" | \
awk '$0 == "" { if (empty) exit(1); empty=1; next }
/Start view/ { if (!empty) exit(1) }
/Secure roots:/ { if (empty) exit(1) }
/Negative trust anchors:/ { if (!empty) exit(1) }
{ empty=0 }'
return $?
}
# Check that for a query against a validating resolver where the
# authoritative zone is unsigned (insecure delegation), glue is returned
# in the additional section
echo_i "checking that additional glue is returned for unsigned delegation ($n)"
ret=0
$DIG +tcp +dnssec -p ${PORT} a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
grep "ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 2" dig.out.ns4.test$n > /dev/null || ret=1
grep "ns\.insecure\.example\..*A.10\.53\.0\.3" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check the example. domain
echo_i "checking that zone transfer worked ($n)"
for i in 1 2 3 4 5 6 7 8 9
do
ret=0
$DIG $DIGOPTS a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS a.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1
[ $ret = 0 ] && break
sleep 1
done
digcomp dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# test AD bit:
# - dig +adflag asks for authentication (ad in response)
echo_i "checking AD bit asking for validation ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# test AD bit:
# - dig +noadflag
echo_i "checking that AD is not set without +adflag or +dnssec ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking for AD in authoritative answer ($n)"
ret=0
$DIG $DIGOPTS a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns2.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive validation NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that 'example/DS' from the referral was used in previous validation ($n)"
ret=0
grep "query 'example/DS/IN' approved" ns1/named.run > /dev/null && ret=1
grep "fetch: example/DS" ns4/named.run > /dev/null && ret=1
grep "validating example/DS: starting" ns4/named.run > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking positive validation NSEC using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.example > delv.out$n || ret=1
grep "a.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
grep "a.example..*.RRSIG.A [0-9][0-9]* 2 300 .*" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking positive validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking positive validation NSEC3 using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.nsec3.example > delv.out$n || ret=1
grep "a.nsec3.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
grep "a.nsec3.example..*RRSIG.A [0-9][0-9]* 3 300.*" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking positive validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking positive validation OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.optout.example > delv.out$n || ret=1
grep "a.optout.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
grep "a.optout.example..*RRSIG.A [0-9][0-9]* 3 300.*" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking positive wildcard validation NSEC ($n)"
ret=0
$DIG $DIGOPTS a.wild.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS a.wild.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
grep "\*\.wild\.example\..*RRSIG NSEC" dig.out.ns4.test$n > /dev/null || ret=1
grep "\*\.wild\.example\..*NSEC z\.example" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking positive wildcard validation NSEC using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.wild.example > delv.out$n || ret=1
grep "a.wild.example..*10.0.0.27" delv.out$n > /dev/null || ret=1
grep "a.wild.example..*RRSIG.A [0-9][0-9]* 2 300.*" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking positive wildcard answer NSEC3 ($n)"
ret=0
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
grep "AUTHORITY: 4," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive wildcard answer NSEC3 ($n)"
ret=0
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
grep "AUTHORITY: 4," dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive wildcard validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking positive wildcard validation NSEC3 using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.wild.nsec3.example > delv.out$n || ret=1
grep "a.wild.nsec3.example..*10.0.0.6" delv.out$n > /dev/null || ret=1
grep "a.wild.nsec3.example..*RRSIG.A [0-9][0-9]* 3 300.*" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking positive wildcard validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS a.wild.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS a.wild.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking positive wildcard validation OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.wild.optout.example > delv.out$n || ret=1
grep "a.wild.optout.example..*10.0.0.6" delv.out$n > /dev/null || ret=1
grep "a.wild.optout.example..*RRSIG.A [0-9][0-9]* 3 300.*" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative validation NXDOMAIN NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative validation NXDOMAIN NSEC using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a q.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative validation NXDOMAIN NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth q.nsec3.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative validation NXDOMAIN NSEC3 using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a q.nsec3.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative validation NXDOMAIN OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth q.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative validation NXDOMAIN OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a q.optout.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative validation NODATA NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative validation NODATA OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 txt a.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative validation NODATA NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative validation NODATA NSEC3 using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 txt a.nsec3.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative validation NODATA OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative validation NODATA OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 txt a.optout.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative wildcard validation NSEC ($n)"
ret=0
$DIG $DIGOPTS b.wild.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS b.wild.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative wildcard validation NSEC using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 txt b.wild.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative wildcard validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative wildcard validation NSEC3 using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 txt b.wild.nsec3.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking negative wildcard validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS b.wild.optout.example. \
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.wild.optout.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking negative wildcard validation OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 txt b.optout.nsec3.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
# Check the insecure.example domain
echo_i "checking 1-server insecurity proof NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking 1-server insecurity proof NSEC using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.insecure.example > delv.out$n || ret=1
grep "a.insecure.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking 1-server insecurity proof NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking 1-server insecurity proof NSEC3 using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.insecure.nsec3.example > delv.out$n || ret=1
grep "a.insecure.nsec3.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking 1-server insecurity proof OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking 1-server insecurity proof OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a a.insecure.optout.example > delv.out$n || ret=1
grep "a.insecure.optout.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking 1-server negative insecurity proof NSEC ($n)"
ret=0
$DIG $DIGOPTS q.insecure.example. a @10.53.0.3 \
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking 1-server negative insecurity proof NSEC using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a q.insecure.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking 1-server negative insecurity proof NSEC3 ($n)"
ret=0
$DIG $DIGOPTS q.insecure.nsec3.example. a @10.53.0.3 \
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.nsec3.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking 1-server negative insecurity proof NSEC3 using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a q.insecure.nsec3.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking 1-server negative insecurity proof OPTOUT ($n)"
ret=0
$DIG $DIGOPTS q.insecure.optout.example. a @10.53.0.3 \
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.optout.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking 1-server negative insecurity proof OPTOUT using dns_client ($n)"
$DELV $DELVOPTS @10.53.0.4 a q.insecure.optout.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking 1-server negative insecurity proof with SOA hack NSEC ($n)"
ret=0
$DIG $DIGOPTS r.insecure.example. soa @10.53.0.3 \
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking 1-server negative insecurity proof with SOA hack NSEC3 ($n)"
ret=0
$DIG $DIGOPTS r.insecure.nsec3.example. soa @10.53.0.3 \
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.nsec3.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking 1-server negative insecurity proof with SOA hack OPTOUT ($n)"
ret=0
$DIG $DIGOPTS r.insecure.optout.example. soa @10.53.0.3 \
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.optout.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check the secure.example domain
echo_i "checking multi-stage positive validation NSEC/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation NSEC/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation NSEC/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation NSEC3/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation NSEC3/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation NSEC3/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation OPTOUT/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation OPTOUT/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking multi-stage positive validation OPTOUT/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking empty NODATA OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth empty.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth empty.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
#grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check the bogus domain
echo_i "checking failed validation ($n)"
ret=0
$DIG $DIGOPTS a.bogus.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking failed validation using dns_client ($n)"
$DELV $DELVOPTS +cd @10.53.0.4 a a.bogus.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: RRSIG failed to verify" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
# Try validating with a bad trusted key.
# This should fail.
echo_i "checking that validation fails with a misconfigured trusted key ($n)"
ret=0
$DIG $DIGOPTS example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1
grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that negative validation fails with a misconfigured trusted key ($n)"
ret=0
$DIG $DIGOPTS example. ptr @10.53.0.5 > dig.out.ns5.test$n || ret=1
grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that insecurity proofs fail with a misconfigured trusted key ($n)"
ret=0
$DIG $DIGOPTS a.insecure.example. a @10.53.0.5 > dig.out.ns5.test$n || ret=1
grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that validation fails when key record is missing ($n)"
ret=0
$DIG $DIGOPTS a.b.keyless.example. a @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking that validation fails when key record is missing using dns_client ($n)"
$DELV $DELVOPTS +cd @10.53.0.4 a a.b.keyless.example > delv.out$n 2>&1 || ret=1
grep "resolution failed: broken trust chain" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking that validation succeeds when a revoked key is encountered ($n)"
ret=0
$DIG $DIGOPTS revkey.example soa @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags: .* ad" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -x ${DELV} ] ; then
ret=0
echo_i "checking that validation succeeds when a revoked key is encountered using dns_client ($n)"
$DELV $DELVOPTS +cd @10.53.0.4 soa revkey.example > delv.out$n 2>&1 || ret=1
grep "fully validated" delv.out$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "Checking that a bad CNAME signature is caught after a +CD query ($n)"
ret=0
#prime
$DIG $DIGOPTS +cd bad-cname.example. @10.53.0.4 > dig.out.ns4.prime$n || ret=1
#check: requery with +CD. pending data should be returned even if it's bogus
expect="a.example.
10.0.0.1"
ans=`$DIG $DIGOPTS +cd +nodnssec +short bad-cname.example. @10.53.0.4` || ret=1
test "$ans" = "$expect" || ret=1
test $ret = 0 || echo_i "failed, got '$ans', expected '$expect'"
#check: requery without +CD. bogus cached data should be rejected.
$DIG $DIGOPTS +nodnssec bad-cname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "Checking that a bad DNAME signature is caught after a +CD query ($n)"
ret=0
#prime
$DIG $DIGOPTS +cd a.bad-dname.example. @10.53.0.4 > dig.out.ns4.prime$n || ret=1
#check: requery with +CD. pending data should be returned even if it's bogus
expect="example.
a.example.
10.0.0.1"
ans=`$DIG $DIGOPTS +cd +nodnssec +short a.bad-dname.example. @10.53.0.4` || ret=1
test "$ans" = "$expect" || ret=1
test $ret = 0 || echo_i "failed, got '$ans', expected '$expect'"
#check: requery without +CD. bogus cached data should be rejected.
$DIG $DIGOPTS +nodnssec a.bad-dname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check the insecure.secure.example domain (insecurity proof)
echo_i "checking 2-server insecurity proof ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.2 a \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.4 a \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check a negative response in insecure.secure.example
echo_i "checking 2-server insecurity proof with a negative answer ($n)"
ret=0
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.2 a > dig.out.ns2.test$n \
|| ret=1
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.4 a > dig.out.ns4.test$n \
|| ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking 2-server insecurity proof with a negative answer and SOA hack ($n)"
ret=0
$DIG $DIGOPTS r.insecure.secure.example. @10.53.0.2 soa > dig.out.ns2.test$n \
|| ret=1
$DIG $DIGOPTS r.insecure.secure.example. @10.53.0.4 soa > dig.out.ns4.test$n \
|| ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check that the query for a security root is successful and has ad set
echo_i "checking security root query ($n)"
ret=0
$DIG $DIGOPTS . @10.53.0.4 key > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check that the setting the cd bit works
echo_i "checking cd bit on a positive answer ($n)"
ret=0
$DIG $DIGOPTS +noauth example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +noauth +cdflag example. soa @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking cd bit on a negative answer ($n)"
ret=0
$DIG $DIGOPTS q.example. soa @10.53.0.4 > dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag q.example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1
digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive validation RSASHA256 NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive validation RSASHA512 NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive validation with KSK-only DNSKEY signature ($n)"
ret=0
$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking cd bit on a query that should fail ($n)"
ret=0
$DIG $DIGOPTS a.bogus.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag a.bogus.example. soa @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking cd bit on an insecurity proof ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +noauth +cdflag a.insecure.example. soa @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - these are looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking cd bit on a negative insecurity proof ($n)"
ret=0
$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag q.insecure.example. a @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - these are looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that validation of an ANY query works ($n)"
ret=0
$DIG $DIGOPTS +noauth foo.example. any @10.53.0.2 > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.example. any @10.53.0.4 > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# 2 records in the zone, 1 NXT, 3 SIGs
grep "ANSWER: 6" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that validation of a query returning a CNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth cname1.example. txt @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth cname1.example. txt @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# the CNAME & its sig, the TXT and its SIG
grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that validation of a query returning a DNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth foo.dname1.example. txt @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.dname1.example. txt @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# The DNAME & its sig, the TXT and its SIG, and the synthesized CNAME.
# It would be nice to test that the CNAME is being synthesized by the
# recursive server and not cached, but I don't know how.
grep "ANSWER: 5" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that validation of an ANY query returning a CNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth cname2.example. any @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth cname2.example. any @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# The CNAME, NXT, and their SIGs
grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that validation of an ANY query returning a DNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth foo.dname2.example. any @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.dname2.example. any @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that positive validation in a privately secure zone works ($n)"
ret=0
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that negative validation in a privately secure zone works ($n)"
ret=0
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that lookups succeed after disabling a algorithm works ($n)"
ret=0
$DIG $DIGOPTS +noauth example. SOA @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth example. SOA @10.53.0.6 \
> dig.out.ns6.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns6.test$n || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns6.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking privately secure to nxdomain works ($n)"
ret=0
$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking privately secure wildcard to nxdomain works ($n)"
ret=0
$DIG $DIGOPTS +noauth a.wild.private.secure.example. SOA @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.wild.private.secure.example. SOA @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking a non-cachable NODATA works ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nosoa.secure.example. txt @10.53.0.7 \
> dig.out.ns7.test$n || ret=1
grep "AUTHORITY: 0" dig.out.ns7.test$n > /dev/null || ret=1
$DIG $DIGOPTS +noauth a.nosoa.secure.example. txt @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking a non-cachable NXDOMAIN works ($n)"
ret=0
$DIG $DIGOPTS +noauth b.nosoa.secure.example. txt @10.53.0.7 \
> dig.out.ns7.test$n || ret=1
grep "AUTHORITY: 0" dig.out.ns7.test$n > /dev/null || ret=1
$DIG $DIGOPTS +noauth b.nosoa.secure.example. txt @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
#
# private.secure.example is served by the same server as its
# grand parent and there is not a secure delegation from secure.example
# to private.secure.example. In addition secure.example is using a
# algorithm which the validation does not support.
#
echo_i "checking dnssec-lookaside-validation works ($n)"
ret=0
$DIG $DIGOPTS private.secure.example. SOA @10.53.0.6 \
> dig.out.ns6.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns6.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that we can load a rfc2535 signed zone ($n)"
ret=0
$DIG $DIGOPTS rfc2535.example. SOA @10.53.0.2 \
> dig.out.ns2.test$n || ret=1
grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that we can transfer a rfc2535 signed zone ($n)"
ret=0
$DIG $DIGOPTS rfc2535.example. SOA @10.53.0.3 \
> dig.out.ns3.test$n || ret=1
grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "basic dnssec-signzone checks:"
echo_ic "two DNSKEYs ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test1.zone > signer.out.$n 2>&1
test -f signed.zone
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_ic "one non-KSK DNSKEY ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test2.zone > signer.out.$n 2>&1
test -f signed.zone
) && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_ic "one KSK DNSKEY ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test3.zone > signer.out.$n 2>&1
test -f signed.zone
) && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_ic "three DNSKEY ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test4.zone > signer.out.$n 2>&1
test -f signed.zone
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_ic "three DNSKEY, one private key missing ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test5.zone > signer.out.$n 2>&1
test -f signed.zone
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_ic "four DNSKEY ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test6.zone > signer.out.$n 2>&1
test -f signed.zone
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_ic "two DNSKEY, both private keys missing ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test7.zone > signer.out.$n 2>&1
test -f signed.zone
) && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_ic "two DNSKEY, one private key missing ($n)"
ret=0
(
cd signer/general
rm -f signed.zone
$SIGNER -f signed.zone -o example.com. test8.zone > signer.out.$n 2>&1
test -f signed.zone
) && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
get_rsasha1_key_ids_from_sigs() {
tr -d '\r' < signer/example.db.signed | \
awk '
NF < 8 { next }
$(NF-5) != "RRSIG" { next }
$(NF-3) != "5" { next }
$NF != "(" { next }
{
getline;
print $3;
}
' | \
sort -u
}
echo_i "checking that a key using an unsupported algorithm cannot be generated ($n)"
ret=0
zone=example
# If dnssec-keygen fails, the test script will exit immediately. Prevent that
# from happening, and also trigger a test failure if dnssec-keygen unexpectedly
# succeeds, by using "&& ret=1".
$KEYGEN -a 255 $zone > dnssectools.out.test$n 2>&1 && ret=1
grep -q "unsupported algorithm: 255" dnssectools.out.test$n || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that a DS record cannot be generated for a key using an unsupported algorithm ($n)"
ret=0
zone=example
# Fake an unsupported algorithm key
unsupportedkey=`$KEYGEN -q -r $RANDFILE -a $DEFAULT_ALGORITHM -b $DEFAULT_BITS -n zone $zone`
awk '$3 == "DNSKEY" { $6 = 255 } { print }' ${unsupportedkey}.key > ${unsupportedkey}.tmp
mv ${unsupportedkey}.tmp ${unsupportedkey}.key
# If dnssec-dsfromkey fails, the test script will exit immediately. Prevent
# that from happening, and also trigger a test failure if dnssec-dsfromkey
# unexpectedly succeeds, by using "&& ret=1".
$DSFROMKEY ${unsupportedkey} > dnssectools.out.test$n 2>&1 && ret=1
grep -q "algorithm is unsupported" dnssectools.out.test$n || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that a zone cannot be signed with a key using an unsupported algorithm ($n)"
ret=0
ret=0
cat signer/example.db.in "${unsupportedkey}.key" > signer/example.db
# If dnssec-signzone fails, the test script will exit immediately. Prevent that
# from happening, and also trigger a test failure if dnssec-signzone
# unexpectedly succeeds, by using "&& ret=1".
$SIGNER -o example signer/example.db ${unsupportedkey} > dnssectools.out.test$n 2>&1 && ret=1
grep -q "algorithm is unsupported" dnssectools.out.test$n || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that we can sign a zone with out-of-zone records ($n)"
ret=0
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone`
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
$SIGNER -o example -f example.db example.db > /dev/null 2>&1
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that we can sign a zone (NSEC3) with out-of-zone records ($n)"
ret=0
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone`
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
$SIGNER -3 - -H 10 -o example -f example.db example.db > /dev/null 2>&1
awk '/^IQF9LQTLK/ {
printf("%s", $0);
while (!index($0, ")")) {
if (getline <= 0)
break;
printf (" %s", $0);
}
printf("\n");
}' example.db | sed 's/[ ][ ]*/ /g' > nsec3param.out
grep "IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG.example. 0 IN NSEC3 1 0 10 - ( IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG A NS SOA RRSIG DNSKEY NSEC3PARAM )" nsec3param.out > /dev/null
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking NSEC3 signing with empty nonterminals above a delegation ($n)"
ret=0
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone`
(
cd signer
cat example.db.in $key1.key $key2.key > example3.db
echo "some.empty.nonterminal.nodes.example 60 IN NS ns.example.tld" >> example3.db
$SIGNER -3 - -A -H 10 -o example -f example3.db example3.db > /dev/null 2>&1
awk '/^IQF9LQTLK/ {
printf("%s", $0);
while (!index($0, ")")) {
if (getline <= 0)
break;
printf (" %s", $0);
}
printf("\n");
}' example.db | sed 's/[ ][ ]*/ /g' > nsec3param.out
grep "IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG.example. 0 IN NSEC3 1 0 10 - ( IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG A NS SOA RRSIG DNSKEY NSEC3PARAM )" nsec3param.out > /dev/null
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that dnsssec-signzone updates originalttl on ttl changes ($n)"
ret=0
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a RSASHA1 -b 1024 -n zone $zone`
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
$SIGNER -o example -f example.db.before example.db > /dev/null 2>&1
sed 's/60.IN.SOA./50 IN SOA /' example.db.before > example.db.changed
$SIGNER -o example -f example.db.after example.db.changed > /dev/null 2>&1
)
grep "SOA 5 1 50" signer/example.db.after > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone keeps valid signatures from removed keys ($n)"
ret=0
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone`
keyid2=`keyfile_to_key_id $key2`
key3=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone`
keyid3=`keyfile_to_key_id $key3`
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
$SIGNER -D -o example example.db > /dev/null 2>&1
# now switch out key2 for key3 and resign the zone
cat example.db.in $key1.key $key3.key > example.db
echo '$INCLUDE "example.db.signed"' >> example.db
$SIGNER -D -o example example.db > /dev/null 2>&1
) || ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid2$" > /dev/null || ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid3$" > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone -R purges signatures from removed keys ($n)"
ret=0
(
cd signer
$SIGNER -RD -o example example.db > /dev/null 2>&1
) || ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid2$" > /dev/null && ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid3$" > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone keeps valid signatures from inactive keys ($n)"
ret=0
zone=example
(
cd signer
cp -f example.db.in example.db
$SIGNER -SD -o example example.db > /dev/null 2>&1
echo '$INCLUDE "example.db.signed"' >> example.db
# now retire key2 and resign the zone
$SETTIME -I now $key2 > /dev/null 2>&1
$SIGNER -SD -o example example.db > /dev/null 2>&1
) || ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid2$" > /dev/null || ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid3$" > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone -Q purges signatures from inactive keys ($n)"
ret=0
(
cd signer
$SIGNER -SDQ -o example example.db > /dev/null 2>&1
) || ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid2$" > /dev/null && ret=1
get_rsasha1_key_ids_from_sigs | grep "^$keyid3$" > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone retains unexpired signatures ($n)"
ret=0
(
cd signer
$SIGNER -Sxt -o example example.db > signer.out.1 2>&1
$SIGNER -Sxt -o example -f example.db.signed example.db.signed > signer.out.2 2>&1
) || ret=1
gen1=`awk '/generated/ {print $3}' signer/signer.out.1`
retain1=`awk '/retained/ {print $3}' signer/signer.out.1`
drop1=`awk '/dropped/ {print $3}' signer/signer.out.1`
gen2=`awk '/generated/ {print $3}' signer/signer.out.2`
retain2=`awk '/retained/ {print $3}' signer/signer.out.2`
drop2=`awk '/dropped/ {print $3}' signer/signer.out.2`
[ "$retain2" -eq `expr "$gen1" + "$retain1"` ] || ret=1
[ "$gen2" -eq 0 ] || ret=1
[ "$drop2" -eq 0 ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone purges RRSIGs from formerly-owned glue (nsec) ($n)"
ret=0
(
cd signer
# remove NSEC-only keys
rm -f Kexample.+005*
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN A 10.53.0.1
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
touch example2.db.signed
$SIGNER -DS -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
(
cd signer
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN NS sub1.example.
sub1.example. IN A 10.53.0.1
sub2.example. IN NS ns.sub2.example.
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
$SIGNER -DS -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone purges RRSIGs from formerly-owned glue (nsec3) ($n)"
ret=0
(
cd signer
rm -f example2.db.signed
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN A 10.53.0.1
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
touch example2.db.signed
$SIGNER -DS -3 feedabee -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
(
cd signer
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN NS sub1.example.
sub1.example. IN A 10.53.0.1
sub2.example. IN NS ns.sub2.example.
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
$SIGNER -DS -3 feedabee -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone output format ($n)"
ret=0
(
cd signer
$SIGNER -O full -f - -Sxt -o example example.db > signer.out.3 2> /dev/null
$SIGNER -O text -f - -Sxt -o example example.db > signer.out.4 2> /dev/null
$SIGNER -O raw -f signer.out.5 -Sxt -o example example.db > /dev/null 2>&1
$SIGNER -O raw=0 -f signer.out.6 -Sxt -o example example.db > /dev/null 2>&1
$SIGNER -O raw -f - -Sxt -o example example.db > signer.out.7 2> /dev/null
) || ret=1
awk '/IN *SOA/ {if (NF != 11) exit(1)}' signer/signer.out.3 || ret=1
awk '/IN *SOA/ {if (NF != 7) exit(1)}' signer/signer.out.4 || ret=1
israw1 signer/signer.out.5 || ret=1
israw0 signer/signer.out.6 || ret=1
israw1 signer/signer.out.7 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone output format ($n)"
ret=0
(
cd signer
$SIGNER -O full -f - -Sxt -o example example.db > signer.out.3 2>&1
$SIGNER -O text -f - -Sxt -o example example.db > signer.out.4 2>&1
) || ret=1
awk '/IN *SOA/ {if (NF != 11) exit(1)}' signer/signer.out.3 || ret=1
awk '/IN *SOA/ {if (NF != 7) exit(1)}' signer/signer.out.4 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking TTLs are capped by dnssec-signzone -M ($n)"
ret=0
(
cd signer
$SIGNER -O full -f signer.out.8 -S -M 30 -o example example.db > /dev/null 2>&1
) || ret=1
awk '/^;/ { next; } $2 > 30 { exit 1; }' signer/signer.out.8 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking dnssec-signzone -N date ($n)"
ret=0
(
cd signer
TZ=UTC $SIGNER -O full -f signer.out.9 -S -N date -o example example2.db > /dev/null 2>&1
) || ret=1
now=`TZ=UTC $PERL -e '@lt=localtime(); printf "%.4d%0.2d%0.2d00\n",$lt[5]+1900,$lt[4]+1,$lt[3];'`
serial=`awk '/^;/ { next; } $4 == "SOA" { print $7 }' signer/signer.out.9`
[ "$now" -eq "$serial" ] || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking validated data are not cached longer than originalttl ($n)"
ret=0
$DIG $DIGOPTS +ttl +noauth a.ttlpatch.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +ttl +noauth a.ttlpatch.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
grep "3600.IN" dig.out.ns3.test$n > /dev/null || ret=1
grep "300.IN" dig.out.ns3.test$n > /dev/null && ret=1
grep "300.IN" dig.out.ns4.test$n > /dev/null || ret=1
grep "3600.IN" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Test that "rndc secroots" is able to dump trusted keys
echo_i "checking rndc secroots ($n)"
ret=0
keyid=`cat ns1/managed.key.id`
$RNDCCMD 10.53.0.4 secroots 2>&1 | sed 's/^/ns4 /' | cat_i
cp ns4/named.secroots named.secroots.test$n
check_secroots_layout named.secroots.test$n || ret=1
linecount=`grep "./$DEFAULT_ALGORITHM/$keyid ; trusted" named.secroots.test$n | wc -l`
[ "$linecount" -eq 1 ] || ret=1
linecount=`cat named.secroots.test$n | wc -l`
[ "$linecount" -eq 9 ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check direct query for RRSIG. If we first ask for normal (non RRSIG)
# record, the corresponding RRSIG should be cached and subsequent query
# for RRSIG will be returned with the cached record.
echo_i "checking RRSIG query from cache ($n)"
ret=0
$DIG $DIGOPTS normalthenrrsig.secure.example. @10.53.0.4 a > /dev/null || ret=1
ans=`$DIG $DIGOPTS +short normalthenrrsig.secure.example. @10.53.0.4 rrsig` || ret=1
expect=`$DIG $DIGOPTS +short normalthenrrsig.secure.example. @10.53.0.3 rrsig | grep '^A' ` || ret=1
test "$ans" = "$expect" || ret=1
# also check that RA is set
$DIG $DIGOPTS normalthenrrsig.secure.example. @10.53.0.4 rrsig > dig.out.ns4.test$n || ret=1
grep "flags:.*ra.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Check direct query for RRSIG: If it's not cached with other records,
# it should result in an empty response.
echo_i "checking RRSIG query not in cache ($n)"
ret=0
ans=`$DIG $DIGOPTS +short rrsigonly.secure.example. @10.53.0.4 rrsig` || ret=1
test -z "$ans" || ret=1
# also check that RA is cleared
$DIG $DIGOPTS rrsigonly.secure.example. @10.53.0.4 rrsig > dig.out.ns4.test$n || ret=1
grep "flags:.*ra.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
#
# RT21868 regression test.
#
echo_i "checking NSEC3 zone with mismatched NSEC3PARAM / NSEC parameters ($n)"
ret=0
$DIG $DIGOPTS non-exist.badparam. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
#
# RT22007 regression test.
#
echo_i "checking optout NSEC3 referral with only insecure delegations ($n)"
ret=0
$DIG $DIGOPTS +norec delegation.single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking optout NSEC3 NXDOMAIN with only insecure delegations ($n)"
ret=0
$DIG $DIGOPTS +norec nonexist.single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1
grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking optout NSEC3 nodata with only insecure delegations ($n)"
ret=0
$DIG $DIGOPTS +norec single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that a zone finishing the transition from RSASHA1 to RSASHA256 validates secure ($n)"
ret=0
$DIG $DIGOPTS ns algroll. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive and negative validation with negative trust anchors ($n)"
ret=0
#
# check correct initial behavior
#
$DIG $DIGOPTS a.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.1 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.1 > /dev/null || ret=1
$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null || ret=1
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.3 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.3 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.3 > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed - checking initial state"; fi
status=`expr $status + $ret`
ret=0
#
# add negative trust anchors
#
$RNDCCMD 10.53.0.4 nta -f -l 20s bogus.example 2>&1 | sed 's/^/ns4 /' | cat_i
$RNDCCMD 10.53.0.4 nta badds.example 2>&1 | sed 's/^/ns4 /' | cat_i
# reconfig should maintain NTAs
$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/ns4 /' | cat_i
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1
lines=`wc -l < rndc.out.ns4.test$n.1`
[ "$lines" -eq 2 ] || ret=1
$RNDCCMD 10.53.0.4 nta secure.example 2>&1 | sed 's/^/ns4 /' | cat_i
$RNDCCMD 10.53.0.4 nta fakenode.secure.example 2>&1 | sed 's/^/ns4 /' | cat_i
# reload should maintain NTAs
$RNDCCMD 10.53.0.4 reload 2>&1 | sed 's/^/ns4 /' | cat_i
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.2
lines=`wc -l < rndc.out.ns4.test$n.2`
[ "$lines" -eq 4 ] || ret=1
start=`$PERL -e 'print time()."\n";'`
if [ $ret != 0 ]; then echo_i "failed - adding NTA's failed"; fi
status=`expr $status + $ret`
ret=0
#
# check behavior with NTA's in place
#
$DIG $DIGOPTS a.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.4 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.4 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.4 > /dev/null && ret=1
$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.5 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.5 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.5 > /dev/null && ret=1
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.6 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.6 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.6 > /dev/null && ret=1
$DIG $DIGOPTS a.fakenode.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.7 || ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.7 > /dev/null && ret=1
echo_i "dumping secroots"
$RNDCCMD 10.53.0.4 secroots | sed 's/^/ns4 /' | cat_i
cp ns4/named.secroots named.secroots.test$n
check_secroots_layout named.secroots.test$n || ret=1
grep "bogus.example: expiry" named.secroots.test$n > /dev/null || ret=1
grep "badds.example: expiry" named.secroots.test$n > /dev/null || ret=1
grep "secure.example: expiry" named.secroots.test$n > /dev/null || ret=1
grep "fakenode.secure.example: expiry" named.secroots.test$n > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed - with NTA's in place failed"; fi
status=`expr $status + $ret`
ret=0
echo_i "waiting for NTA rechecks/expirations"
#
# secure.example and badds.example used default nta-duration
# (configured as 12s in ns4/named1.conf), but nta recheck interval
# is configured to 9s, so at t=10 the NTAs for secure.example and
# fakenode.secure.example should both be lifted, but badds.example
# should still be going.
#
$PERL -e 'my $delay = '$start' + 10 - time(); select(undef, undef, undef, $delay) if ($delay > 0);'
$DIG $DIGOPTS b.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.8 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.8 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.8 > /dev/null || ret=1
$DIG $DIGOPTS b.fakenode.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.9 || ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.9 > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n.9 > /dev/null || ret=1
$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.10 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.10 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.10 > /dev/null && ret=1
if [ $ret != 0 ]; then echo_i "failed - checking that default nta's were lifted due to recheck"; fi
status=`expr $status + $ret`
ret=0
#
# bogus.example was set to expire in 20s, so at t=13
# it should still be NTA'd, but badds.example used the default
# lifetime of 12s, so it should revert to SERVFAIL now.
#
$PERL -e 'my $delay = '$start' + 13 - time(); select(undef, undef, undef, $delay) if ($delay > 0);'
# check nta table
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n._11
lines=`wc -l < rndc.out.ns4.test$n._11`
[ "$lines" -le 2 ] || ret=1
grep "bogus.example: expiry" rndc.out.ns4.test$n._11 > /dev/null || ret=1
grep "badds.example: expiry" rndc.out.ns4.test$n._11 > /dev/null && ret=1
$DIG $DIGOPTS b.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.11 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.11 > /dev/null && ret=1
$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.12 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.12 > /dev/null || ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.12 > /dev/null && ret=1
$DIG $DIGOPTS c.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.13 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.13 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.13 > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed - checking that default nta's were lifted due to lifetime"; fi
status=`expr $status + $ret`
ret=0
#
# at t=21, all the NTAs should have expired.
#
$PERL -e 'my $delay = '$start' + 21 - time(); select(undef, undef, undef, $delay) if ($delay > 0);'
# check correct behavior after bogus.example expiry
$DIG $DIGOPTS d.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.14 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.14 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.14 > /dev/null || ret=1
$DIG $DIGOPTS c.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.15 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.15 > /dev/null || ret=1
# check nta table has been cleaned up now
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.3
lines=`wc -l < rndc.out.ns4.test$n.3`
[ "$lines" -eq 0 ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed - checking that all nta's have been lifted"; fi
status=`expr $status + $ret`
ret=0
echo_i "testing NTA removals ($n)"
$RNDCCMD 10.53.0.4 nta badds.example 2>&1 | sed 's/^/ns4 /' | cat_i
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1
grep "badds.example: expiry" rndc.out.ns4.test$n.1 > /dev/null || ret=1
$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.1 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.1 > /dev/null && ret=1
grep "^a.badds.example." dig.out.ns4.test$n.1 > /dev/null || ret=1
$RNDCCMD 10.53.0.4 nta -remove badds.example > rndc.out.ns4.test$n.2
grep "Negative trust anchor removed: badds.example/_default" rndc.out.ns4.test$n.2 > /dev/null || ret=1
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.3
grep "badds.example: expiry" rndc.out.ns4.test$n.3 > /dev/null && ret=1
$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
echo_i "remove non-existent NTA three times"
$RNDCCMD 10.53.0.4 nta -r foo > rndc.out.ns4.test$n.4 2>&1
$RNDCCMD 10.53.0.4 nta -remove foo > rndc.out.ns4.test$n.5 2>&1
$RNDCCMD 10.53.0.4 nta -r foo > rndc.out.ns4.test$n.6 2>&1
grep "'nta' failed: not found" rndc.out.ns4.test$n.6 > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
n=`expr $n + 1`
echo_i "testing NTA with bogus lifetimes ($n)"
echo_i "check with no nta lifetime specified"
$RNDCCMD 10.53.0.4 nta -l "" foo > rndc.out.ns4.test$n.1 2>&1
grep "'nta' failed: bad ttl" rndc.out.ns4.test$n.1 > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
echo_i "check with bad nta lifetime"
$RNDCCMD 10.53.0.4 nta -l garbage foo > rndc.out.ns4.test$n.2 2>&1
grep "'nta' failed: bad ttl" rndc.out.ns4.test$n.2 > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
echo_i "check with too long nta lifetime"
$RNDCCMD 10.53.0.4 nta -l 7d1h foo > rndc.out.ns4.test$n.3 2>&1
grep "'nta' failed: out of range" rndc.out.ns4.test$n.3 > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
#
# check NTA persistence across restarts
#
n=`expr $n + 1`
echo_i " testing NTA persistence across restarts ($n)"
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1
lines=`wc -l < rndc.out.ns4.test$n.1`
[ "$lines" -eq 0 ] || ret=1
$RNDCCMD 10.53.0.4 nta -f -l 30s bogus.example 2>&1 | sed 's/^/I:ns4 /'
$RNDCCMD 10.53.0.4 nta -f -l 10s badds.example 2>&1 | sed 's/^/I:ns4 /'
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.2
lines=`wc -l < rndc.out.ns4.test$n.2`
[ "$lines" -eq 2 ] || ret=1
start=`$PERL -e 'print time()."\n";'`
if [ $ret != 0 ]; then echo_i "failed - NTA persistence: adding NTA's failed"; fi
status=`expr $status + $ret`
ret=0
echo_i "killing ns4 with SIGTERM"
cd ns4
$KILL -TERM `cat named.pid`
rm -f named.pid
cd ..
#
# ns4 has now shutdown. wait until t=14 when badds.example's NTA
# (lifetime=10s) would have expired, and then restart ns4.
#
echo_i "waiting till 14s have passed since NTAs were added before restarting ns4"
$PERL -e 'my $delay = '$start' + 14 - time(); select(undef, undef, undef, $delay) if ($delay > 0);'
if
$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} dnssec ns4
then
echo_i "restarted server ns4"
else
echo_i "could not restart server ns4"
exit 1
fi
echo_i "sleeping for an additional 4 seconds for ns4 to fully startup"
sleep 4
#
# ns4 should be back up now. The NTA for bogus.example should still be
# valid, whereas badds.example should not have been added during named
# startup (as it had already expired), the fact that it's ignored should
# be logged.
#
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.3
lines=`wc -l < rndc.out.ns4.test$n.3`
[ "$lines" -eq 1 ] || ret=1
grep "bogus.example: expiry" rndc.out.ns4.test$n.3 > /dev/null || ret=1
$DIG $DIGOPTS b.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.4 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.4 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.4 > /dev/null && ret=1
$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.5 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.5 > /dev/null || ret=1
grep "ignoring expired NTA at badds.example" ns4/named.run > /dev/null || ret=1
# cleanup
$RNDCCMD 10.53.0.4 nta -remove bogus.example > rndc.out.ns4.test$n.6
if [ $ret != 0 ]; then echo_i "failed - NTA persistence: restoring NTA failed"; fi
status=`expr $status + $ret`
ret=0
#
# check "regular" attribute in NTA file works as expected at named
# startup.
#
n=`expr $n + 1`
echo_i "testing loading regular attribute from NTA file ($n)"
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 2>/dev/null
lines=`wc -l < rndc.out.ns4.test$n.1`
[ "$lines" -eq 0 ] || ret=1
# initially, secure.example. validates with AD=1
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.2 > /dev/null || ret=1
echo_i "killing ns4 with SIGTERM"
cd ns4
$KILL -TERM `cat named.pid`
rm -f named.pid
cd ..
echo_i "sleeping for an additional 4 seconds for ns4 to fully shutdown"
sleep 4
#
# ns4 has now shutdown. add NTA for secure.example. directly into the
# _default.nta file with the regular attribute and some future timestamp.
#
year=`date +%Y`
future="`expr 20 + ${year}`0101010000"
echo "secure.example. regular $future" > ns4/_default.nta
start=`$PERL -e 'print time()."\n";'`
if
$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} dnssec ns4
then
echo_i "restarted server ns4"
else
echo_i "could not restart server ns4"
exit 1
fi
# nta-recheck is configured as 9s, so at t=12 the NTAs for
# secure.example. should be lifted as it is not a forced NTA.
echo_i "waiting till 12s have passed after ns4 was restarted"
$PERL -e 'my $delay = '$start' + 12 - time(); select(undef, undef, undef, $delay) if ($delay > 0);'
# secure.example. should now return an AD=1 answer (still validates) as
# the NTA has been lifted.
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.3 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.3 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.3 > /dev/null || ret=1
# cleanup
$RNDCCMD 10.53.0.4 nta -remove secure.example > rndc.out.ns4.test$n.4 2>/dev/null
if [ $ret != 0 ]; then echo_i "failed - NTA persistence: loading regular NTAs failed"; fi
status=`expr $status + $ret`
ret=0
#
# check "forced" attribute in NTA file works as expected at named
# startup.
#
n=`expr $n + 1`
echo_i "testing loading forced attribute from NTA file ($n)"
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 2>/dev/null
lines=`wc -l < rndc.out.ns4.test$n.1`
[ "$lines" -eq 0 ] || ret=1
# initially, secure.example. validates with AD=1
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.2 > /dev/null || ret=1
echo_i "killing ns4 with SIGTERM"
cd ns4
$KILL -TERM `cat named.pid`
rm -f named.pid
cd ..
echo_i "sleeping for an additional 4 seconds for ns4 to fully shutdown"
sleep 4
#
# ns4 has now shutdown. add NTA for secure.example. directly into the
# _default.nta file with the forced attribute and some future timestamp.
#
echo "secure.example. forced $future" > ns4/_default.nta
start=`$PERL -e 'print time()."\n";'`
if
$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} dnssec ns4
then
echo_i "restarted server ns4"
else
echo_i "could not restart server ns4"
exit 1
fi
# nta-recheck is configured as 9s, but even at t=12 the NTAs for
# secure.example. should not be lifted as it is a forced NTA.
echo_i "waiting till 12s have passed after ns4 was restarted"
$PERL -e 'my $delay = '$start' + 12 - time(); select(undef, undef, undef, $delay) if ($delay > 0);'
# secure.example. should now return an AD=0 answer (non-authenticated)
# as the NTA is still there.
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.3 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.3 > /dev/null && ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.3 > /dev/null && ret=1
# cleanup
$RNDCCMD 10.53.0.4 nta -remove secure.example > rndc.out.ns4.test$n.4 2>/dev/null
if [ $ret != 0 ]; then echo_i "failed - NTA persistence: loading forced NTAs failed"; fi
status=`expr $status + $ret`
ret=0
#
# check that NTA lifetime read from file is clamped to 1 week.
#
n=`expr $n + 1`
echo_i "testing loading out of bounds lifetime from NTA file ($n)"
echo_i "killing ns4 with SIGTERM"
cd ns4
$KILL -TERM `cat named.pid`
rm -f named.pid
cd ..
echo_i "sleeping for an additional 4 seconds for ns4 to fully shutdown"
sleep 4
#
# ns4 has now shutdown. add NTA for secure.example. directly into the
# _default.nta file with a lifetime well into the future.
#
echo "secure.example. forced $future" > ns4/_default.nta
added=`$PERL -e 'print time()."\n";'`
if
$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} dnssec ns4
then
echo_i "restarted server ns4"
else
echo_i "could not restart server ns4"
exit 1
fi
echo_i "sleeping for an additional 4 seconds for ns4 to fully startup"
sleep 4
# dump the NTA to a file
$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 2>/dev/null
lines=`wc -l < rndc.out.ns4.test$n.1`
[ "$lines" -eq 1 ] || ret=1
ts=`awk '{print $3" "$4}' < rndc.out.ns4.test$n.1`
# rndc nta outputs localtime, so append the timezone
ts_with_zone="$ts `date +%z`"
echo "ts=$ts" > rndc.out.ns4.test$n.2
echo "ts_with_zone=$ts_with_zone" >> rndc.out.ns4.test$n.2
echo "added=$added" >> rndc.out.ns4.test$n.2
if $PERL -e 'use Time::Piece; use Time::Seconds;' 2>/dev/null
then
# ntadiff.pl computes $ts_with_zone - ($added + 1week)
d=`$PERL ./ntadiff.pl "$ts_with_zone" "$added"`
echo "d=$d" >> rndc.out.ns4.test$n.2
# diff from $added(now) + 1week to the clamped NTA lifetime should be
# less than a few seconds (handle daylight saving changes by adding 3600).
[ $d -lt 3610 ] || ret=1
else
echo_i "skipped ntadiff test; install PERL module Time::Piece"
fi
# cleanup
$RNDCCMD 10.53.0.4 nta -remove secure.example > rndc.out.ns4.test$n.3 2>/dev/null
if [ $ret != 0 ]; then echo_i "failed - NTA lifetime clamping failed"; fi
status=`expr $status + $ret`
n=`expr $n + 1`
echo_i "checking that NTAs work with 'forward only;' to a validating resolver ($n)"
ret=0
# Sanity check behavior without an NTA in place.
$DIG $DIGOPTS @10.53.0.9 badds.example. SOA > dig.out.ns9.test$n.1 || ret=1
grep "SERVFAIL" dig.out.ns9.test$n.1 > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns9.test$n.1 > /dev/null || ret=1
grep "flags:[^;]* ad[ ;].*QUERY" dig.out.ns9.test$n.1 > /dev/null && ret=1
# Add an NTA, expecting that to cause resolution to succeed.
$RNDCCMD 10.53.0.9 nta badds.example > rndc.out.ns9.test$n.1 2>&1 || ret=1
$DIG $DIGOPTS @10.53.0.9 badds.example. SOA > dig.out.ns9.test$n.2 || ret=1
grep "NOERROR" dig.out.ns9.test$n.2 > /dev/null || ret=1
grep "ANSWER: 2" dig.out.ns9.test$n.2 > /dev/null || ret=1
grep "flags:[^;]* ad[ ;].*QUERY" dig.out.ns9.test$n.2 > /dev/null && ret=1
# Remove the NTA, expecting that to cause resolution to fail again.
$RNDCCMD 10.53.0.9 nta -remove badds.example > rndc.out.ns9.test$n.2 2>&1 || ret=1
$DIG $DIGOPTS @10.53.0.9 badds.example. SOA > dig.out.ns9.test$n.3 || ret=1
grep "SERVFAIL" dig.out.ns9.test$n.3 > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns9.test$n.3 > /dev/null || ret=1
grep "flags:[^;]* ad[ ;].*QUERY" dig.out.ns9.test$n.3 > /dev/null && ret=1
if [ "$ret" -ne 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "completed NTA tests"
# Run a minimal update test if possible. This is really just
# a regression test for RT #2399; more tests should be added.
if $PERL -e 'use Net::DNS;' 2>/dev/null
then
echo_i "running DNSSEC update test"
ret=0
{
$PERL dnssec_update_test.pl -s 10.53.0.3 -p ${PORT} dynamic.example. || ret=1
} | cat_i
[ $ret -eq 1 ] && status=1
else
echo_i "The DNSSEC update test requires the Net::DNS library." >&2
fi
n=`expr $n + 1`
echo_i "checking managed key maintenance has not started yet ($n)"
ret=0
[ -f "ns4/managed-keys.bind.jnl" ] && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Reconfigure caching server to use "dnssec-validation auto", and repeat
# some of the DNSSEC validation tests to ensure that it works correctly.
echo_i "switching to automatic root key configuration"
copy_setports ns4/named2.conf.in ns4/named.conf
$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/ns4 /' | cat_i
sleep 5
echo_i "checking managed key maintenance timer has now started ($n)"
ret=0
[ -f "ns4/managed-keys.bind.jnl" ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive validation NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking positive validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking negative validation ($n)"
ret=0
$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that root DS queries validate ($n)"
ret=0
$DIG $DIGOPTS +noauth . @10.53.0.1 ds > dig.out.ns1.test$n || ret=1
$DIG $DIGOPTS +noauth . @10.53.0.4 ds > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns1.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that DS at a RFC 1918 empty zone lookup succeeds ($n)"
ret=0
$DIG $DIGOPTS +noauth 10.in-addr.arpa ds @10.53.0.2 >dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth 10.in-addr.arpa ds @10.53.0.6 >dig.out.ns6.test$n || ret=1
digcomp dig.out.ns2.test$n dig.out.ns6.test$n || ret=1
grep "status: NOERROR" dig.out.ns6.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking expired signatures remain with "'"allow-update { none; };"'" and no keys available ($n)"
ret=0
$DIG $DIGOPTS +noauth expired.example. +dnssec @10.53.0.3 soa > dig.out.ns3.test$n || ret=1
grep "RRSIG.SOA" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking expired signatures do not validate ($n)"
ret=0
$DIG $DIGOPTS +noauth expired.example. +dnssec @10.53.0.4 soa > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
grep "expired.example/.*: RRSIG has expired" ns4/named.run > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that the NSEC3 record for the apex is properly signed when a DNSKEY is added via UPDATE ($n)"
ret=0
(
cd ns3
kskname=`$KEYGEN -q -3 -r $RANDFILE -fk update-nsec3.example`
(
echo zone update-nsec3.example
echo server 10.53.0.3 ${PORT}
grep DNSKEY ${kskname}.key | sed -e 's/^/update add /' -e 's/IN/300 IN/'
echo send
) | $NSUPDATE
)
$DIG $DIGOPTS +dnssec a update-nsec3.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1
grep "NSEC3 .* TYPE65534" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that the NSEC record is properly generated when DNSKEY are added via auto-dnssec ($n)"
ret=0
$DIG $DIGOPTS +dnssec a auto-nsec.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1
grep "IN.NSEC[^3].* DNSKEY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that the NSEC3 record is properly generated when DNSKEY are added via auto-dnssec ($n)"
ret=0
$DIG $DIGOPTS +dnssec a auto-nsec3.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1
grep "IN.NSEC3 .* DNSKEY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that signing records have been marked as complete ($n)"
ret=0
checkprivate dynamic.example 10.53.0.3 || ret=1
checkprivate update-nsec3.example 10.53.0.3 || ret=1
checkprivate auto-nsec3.example 10.53.0.3 || ret=1
checkprivate expiring.example 10.53.0.3 || ret=1
checkprivate auto-nsec.example 10.53.0.3 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing' without arguments is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -list' without zone is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -list > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -clear' without additional arguments is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -clear > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -clear all' without zone is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -clear all > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param' without additional arguments is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param none' without zone is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param none > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param 1' without additional arguments is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param 1 > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param 1 0' without additional arguments is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param 1 0 0' without additional arguments is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param 1 0 0 -' without zone is handled ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - > /dev/null 2>&1 && ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param' works with salt ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 ffff inline.example > /dev/null 2>&1 || ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
for i in 1 2 3 4 5 6 7 8 9 10 ; do
salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'`
if [ "$salt" = "FFFF" ]; then
break;
fi
echo_i "sleeping ...."
sleep 1
done;
[ "$salt" = "FFFF" ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param' works without salt ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - inline.example > /dev/null 2>&1 || ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
for i in 1 2 3 4 5 6 7 8 9 10 ; do
salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'`
if [ "$salt" = "-" ]; then
break;
fi
echo_i "sleeping ...."
sleep 1
done;
[ "$salt" = "-" ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param' works with 'auto' as salt ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 auto inline.example > /dev/null 2>&1 || ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
for i in 1 2 3 4 5 6 7 8 9 10 ; do
salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'`
[ -n "$salt" -a "$salt" != "-" ] && break
echo_i "sleeping ...."
sleep 1
done;
[ "$salt" != "-" ] || ret=1
[ `expr "${salt}" : ".*"` -eq 16 ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'rndc signing -nsec3param' with 'auto' as salt again generates a different salt ($n)"
ret=0
oldsalt=$salt
$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 auto inline.example > /dev/null 2>&1 || ret=1
$RNDCCMD 10.53.0.3 status > /dev/null || ret=1
for i in 1 2 3 4 5 6 7 8 9 10 ; do
salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'`
[ -n "$salt" -a "$salt" != "$oldsalt" ] && break
echo_i "sleeping ...."
sleep 1
done;
[ "$salt" != "$oldsalt" ] || ret=1
[ `expr "$salt" : ".*"` -eq 16 ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check rndc signing -list output ($n)"
ret=0
$RNDCCMD 10.53.0.3 signing -list dynamic.example 2>&1 > signing.out
grep "No signing records found" signing.out > /dev/null 2>&1 || {
ret=1
sed 's/^/ns3 /' signing.out | cat_i
}
$RNDCCMD 10.53.0.3 signing -list update-nsec3.example 2>&1 > signing.out
grep "Done signing with key .*/NSEC3RSASHA1" signing.out > /dev/null 2>&1 || {
ret=1
sed 's/^/ns3 /' signing.out | cat_i
}
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "clear signing records ($n)"
$RNDCCMD 10.53.0.3 signing -clear all update-nsec3.example > /dev/null 2>&1 || ret=1
check_no_signing_record_found() {
$RNDCCMD 10.53.0.3 signing -list update-nsec3.example > signing.out 2>&1
grep -q "No signing records found" signing.out || {
sed 's/^/ns3 /' signing.out | cat_i
return 1
}
return 0
}
retry_quiet 5 check_no_signing_record_found || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that a insecure zone beneath a cname resolves ($n)"
ret=0
$DIG $DIGOPTS soa insecure.below-cname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that a secure zone beneath a cname resolves ($n)"
ret=0
$DIG $DIGOPTS soa secure.below-cname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 2," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking DNSKEY query with no data still gets put in cache ($n)"
ret=0
myDIGOPTS="+noadd +nosea +nostat +noquest +nocomm +nocmd -p ${PORT} @10.53.0.4"
firstVal=`$DIG $myDIGOPTS insecure.example. dnskey| awk '$1 != ";;" { print $2 }'`
sleep 1
secondVal=`$DIG $myDIGOPTS insecure.example. dnskey| awk '$1 != ";;" { print $2 }'`
if [ ${firstVal:-0} -eq ${secondVal:-0} ]
then
sleep 1
thirdVal=`$DIG $myDIGOPTS insecure.example. dnskey|awk '$1 != ";;" { print $2 }'`
if [ ${firstVal:-0} -eq ${thirdVal:-0} ]
then
echo_i "cannot confirm query answer still in cache"
ret=1
fi
fi
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a split dnssec dnssec-signzone work ($n)"
ret=0
$DIG $DIGOPTS soa split-dnssec.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 2," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a smart split dnssec dnssec-signzone work ($n)"
ret=0
$DIG $DIGOPTS soa split-smart.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 2," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that NOTIFY is sent at the end of NSEC3 chain generation ($n)"
ret=0
(
echo zone nsec3chain-test
echo server 10.53.0.2 ${PORT}
echo update add nsec3chain-test. 0 nsec3param 1 0 1 123456
echo send
) | $NSUPDATE
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
do
$DIG $DIGOPTS nsec3param nsec3chain-test @10.53.0.2 > dig.out.ns2.test$n || ret=1
if grep "ANSWER: 3," dig.out.ns2.test$n >/dev/null
then
break;
fi
echo_i "sleeping ...."
sleep 3
done
grep "ANSWER: 3," dig.out.ns2.test$n > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "nsec3 chain generation not complete"; fi
$DIG $DIGOPTS +noauth +nodnssec soa nsec3chain-test @10.53.0.2 > dig.out.ns2.test$n || ret=1
s2=`awk '$4 == "SOA" { print $7}' dig.out.ns2.test$n`
for i in 1 2 3 4 5 6 7 8 9 10
do
$DIG $DIGOPTS +noauth +nodnssec soa nsec3chain-test @10.53.0.3 > dig.out.ns3.test$n || ret=1
s3=`awk '$4 == "SOA" { print $7}' dig.out.ns3.test$n`
test "$s2" = "$s3" && break
sleep 1
done
digcomp dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check dnssec-dsfromkey from stdin ($n)"
ret=0
$DIG $DIGOPTS dnskey algroll. @10.53.0.2 | \
$DSFROMKEY -f - algroll. > dig.out.ns2.test$n || ret=1
NF=`awk '{print NF}' dig.out.ns2.test$n | sort -u`
[ "${NF}" = 7 ] || ret=1
# make canonical
awk '{
for (i=1;i<7;i++) printf("%s ", $i);
for (i=7;i<=NF;i++) printf("%s", $i);
printf("\n");
}' < dig.out.ns2.test$n > canonical1.$n || ret=1
awk '{
for (i=1;i<7;i++) printf("%s ", $i);
for (i=7;i<=NF;i++) printf("%s", $i);
printf("\n");
}' < ns1/dsset-algroll$TP > canonical2.$n || ret=1
$DIFF -b canonical1.$n canonical2.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# Intentionally strip ".key" from keyfile name to ensure the error message
# includes it anyway to avoid confusion (RT #21731)
echo_i "check dnssec-dsfromkey error message when keyfile is not found ($n)"
ret=0
key=`$KEYGEN -q -r $RANDFILE example.` || ret=1
mv $key.key $key
$DSFROMKEY $key > dsfromkey.out.$n 2>&1 && ret=1
grep "$key.key: file not found" dsfromkey.out.$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing soon-to-expire RRSIGs without a replacement private key ($n)"
ret=0
$DIG $ANSWEROPTS +nottlid expiring.example ns @10.53.0.3 | grep RRSIG > dig.out.ns3.test$n 2>&1
# there must be a signature here
[ -s dig.out.ns3.test$n ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing new records are signed with 'no-resign' ($n)"
ret=0
(
echo zone nosign.example
echo server 10.53.0.3 ${PORT}
echo update add new.nosign.example 300 in txt "hi there"
echo send
) | $NSUPDATE
sleep 1
$DIG $ANSWEROPTS +nottlid txt new.nosign.example @10.53.0.3 \
> dig.out.ns3.test$n 2>&1
grep RRSIG dig.out.ns3.test$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing expiring records aren't resigned with 'no-resign' ($n)"
ret=0
$DIG $ANSWEROPTS +nottlid nosign.example ns @10.53.0.3 | \
grep RRSIG | sed 's/[ ][ ]*/ /g' > dig.out.ns3.test$n 2>&1
# the NS RRSIG should not be changed
$DIFF nosign.before dig.out.ns3.test$n > /dev/null|| ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing updates fail with no private key ($n)"
ret=0
rm -f ns3/Knosign.example.*.private
(
echo zone nosign.example
echo server 10.53.0.3 ${PORT}
echo update add fail.nosign.example 300 in txt "reject me"
echo send
) | $NSUPDATE > /dev/null 2>&1 && ret=1
$DIG $ANSWEROPTS +nottlid fail.nosign.example txt @10.53.0.3 \
> dig.out.ns3.test$n 2>&1
[ -s dig.out.ns3.test$n ] && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing legacy upper case signer name validation ($n)"
ret=0
$DIG +tcp +noadd +noauth +dnssec -p ${PORT} soa upper.example @10.53.0.4 \
> dig.out.ns4.test$n 2>&1
grep 'flags:.* ad;' dig.out.ns4.test$n > /dev/null || ret=1
grep 'RRSIG.*SOA.* UPPER\.EXAMPLE\. ' dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing that we lower case signer name ($n)"
ret=0
$DIG +tcp +noadd +noauth +dnssec -p ${PORT} soa LOWER.EXAMPLE @10.53.0.4 \
> dig.out.ns4.test$n 2>&1
grep 'flags:.* ad;' dig.out.ns4.test$n > /dev/null || ret=1
grep 'RRSIG.*SOA.* lower\.example\. ' dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing TTL is capped at RRSIG expiry time ($n)"
ret=0
$RNDCCMD 10.53.0.3 freeze expiring.example 2>&1 | sed 's/^/ns3 /' | cat_i
(
cd ns3
for file in K*.moved; do
mv $file `basename $file .moved`
done
$SIGNER -S -r $RANDFILE -N increment -e now+1mi -o expiring.example expiring.example.db > /dev/null 2>&1
) || ret=1
$RNDCCMD 10.53.0.3 reload expiring.example 2>&1 | sed 's/^/ns3 /' | cat_i
$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i
$DIG $ANSWEROPTS +cd expiring.example soa @10.53.0.4 > dig.out.ns4.1.$n
$DIG $ANSWEROPTS expiring.example soa @10.53.0.4 > dig.out.ns4.2.$n
ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n`
ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n`
for ttl in ${ttls:-0}; do
[ "${ttl}" -eq 300 ] || ret=1
done
for ttl in ${ttls2:-0}; do
[ "${ttl}" -le 60 ] || ret=1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section (NS) ($n)"
ret=0
$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i
sleep 1
$DIG $ADDITIONALOPTS +cd expiring.example ns @10.53.0.4 > dig.out.ns4.1.$n
$DIG $ADDITIONALOPTS expiring.example ns @10.53.0.4 > dig.out.ns4.2.$n
ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n`
ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n`
for ttl in ${ttls:-300}; do
[ "$ttl" -le 300 ] && [ "$ttl" -gt 240 ] || ret=1
done
for ttl in ${ttls2:-0}; do
[ "$ttl" -le 60 ] || ret=1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section (MX) ($n)"
ret=0
$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i
sleep 1
$DIG $ADDITIONALOPTS +cd expiring.example mx @10.53.0.4 > dig.out.ns4.1.$n
$DIG $ADDITIONALOPTS expiring.example mx @10.53.0.4 > dig.out.ns4.2.$n
ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n`
ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n`
for ttl in ${ttls:-300}; do
[ "$ttl" -le 300 ] && [ "$ttl" -gt 240 ] || ret=1
done
for ttl in ${ttls2:-0}; do
[ "$ttl" -le 60 ] || ret=1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
copy_setports ns4/named3.conf.in ns4/named.conf
$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/ns4 /' | cat_i
sleep 3
echo_i "testing TTL of about to expire RRsets with dnssec-accept-expired yes; ($n)"
ret=0
$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i
$DIG $ANSWEROPTS +cd expiring.example soa @10.53.0.4 > dig.out.ns4.1.$n
$DIG $ANSWEROPTS expiring.example soa @10.53.0.4 > dig.out.ns4.2.$n
ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n`
ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n`
for ttl in ${ttls:-0}; do
[ $ttl -eq 300 ] || ret=1
done
for ttl in ${ttls2:-0}; do
[ "$ttl" -eq 120 ] || ret=1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing TTL of expired RRsets with dnssec-accept-expired yes; ($n)"
ret=0
$DIG $ANSWEROPTS +cd expired.example soa @10.53.0.4 > dig.out.ns4.1.$n
$DIG $ANSWEROPTS expired.example soa @10.53.0.4 > dig.out.ns4.2.$n
ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n`
ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n`
for ttl in ${ttls:-0}; do
[ $ttl -eq 300 ] || ret=1
done
for ttl in ${ttls2:-0}; do
[ "$ttl" -eq 120 ] || ret=1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
copy_setports ns4/named4.conf.in ns4/named.conf
$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/I:ns4 /'
sleep 3
echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section with dnssec-accept-expired yes; ($n)"
ret=0
$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i
$DIG $ADDITIONALOPTS +cd expiring.example mx @10.53.0.4 > dig.out.ns4.1.$n
$DIG $ADDITIONALOPTS expiring.example mx @10.53.0.4 > dig.out.ns4.2.$n
ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n`
ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n`
for ttl in ${ttls:-300}; do
[ "$ttl" -le 300 ] && [ "$ttl" -gt 240 ] || ret=1
done
for ttl in ${ttls2:-0}; do
[ $ttl -le 120 -a $ttl -gt 60 ] || ret=1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section with acache off; ($n)"
ret=0
$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i
$DIG $ADDITIONALOPTS +cd expiring.example mx @10.53.0.4 > dig.out.ns4.1.$n
$DIG $ADDITIONALOPTS expiring.example mx @10.53.0.4 > dig.out.ns4.2.$n
ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n`
ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n`
for ttl in ${ttls:-300}; do
[ "$ttl" -le 300 ] && [ "$ttl" -gt 240 ] || ret=1
done
for ttl in ${ttls2:-0}; do
[ $ttl -le 120 -a $ttl -gt 60 ] || ret=1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing DNSKEY lookup via CNAME ($n)"
ret=0
$DIG $DIGOPTS +noauth cnameandkey.secure.example. \
@10.53.0.3 dnskey > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth cnameandkey.secure.example. \
@10.53.0.4 dnskey > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing KEY lookup at CNAME (present) ($n)"
ret=0
$DIG $DIGOPTS +noauth cnameandkey.secure.example. \
@10.53.0.3 key > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth cnameandkey.secure.example. \
@10.53.0.4 key > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing KEY lookup at CNAME (not present) ($n)"
ret=0
$DIG $DIGOPTS +noauth cnamenokey.secure.example. \
@10.53.0.3 key > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth cnamenokey.secure.example. \
@10.53.0.4 key > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing DNSKEY lookup via DNAME ($n)"
ret=0
$DIG $DIGOPTS a.dnameandkey.secure.example. \
@10.53.0.3 dnskey > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS a.dnameandkey.secure.example. \
@10.53.0.4 dnskey > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null || ret=1
grep "DNAME" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing KEY lookup via DNAME ($n)"
ret=0
$DIG $DIGOPTS b.dnameandkey.secure.example. \
@10.53.0.3 key > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.dnameandkey.secure.example. \
@10.53.0.4 key > dig.out.ns4.test$n || ret=1
digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "DNAME" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that named doesn't loop when all private keys are not available ($n)"
ret=0
lines=`grep "reading private key file expiring.example" ns3/named.run | wc -l`
test ${lines:-1000} -lt 15 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check against against missing nearest provable proof ($n)"
$DIG $DIGOPTS +norec b.c.d.optout-tld. \
@10.53.0.6 ds > dig.out.ds.ns6.test$n || ret=1
nsec3=`grep "IN.NSEC3" dig.out.ds.ns6.test$n | wc -l`
[ $nsec3 -eq 2 ] || ret=1
$DIG $DIGOPTS +norec b.c.d.optout-tld. \
@10.53.0.6 A > dig.out.ns6.test$n || ret=1
nsec3=`grep "IN.NSEC3" dig.out.ns6.test$n | wc -l`
[ $nsec3 -eq 1 ] || ret=1
$DIG $DIGOPTS optout-tld. \
@10.53.0.4 SOA > dig.out.soa.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.soa.ns4.test$n > /dev/null || ret=1
$DIG $DIGOPTS b.c.d.optout-tld. \
@10.53.0.4 A > dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that key id are logged when dumping the cache ($n)"
ret=0
rndc_dumpdb ns4
grep "; key id = " ns4/named_dump.db.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check KEYDATA records are printed in human readable form in key zone ($n)"
# force the managed-keys zone to be written out
$RNDCCMD 10.53.0.4 managed-keys sync 2>&1 | sed 's/^/ns4 /' | cat_i
for i in 1 2 3 4 5 6 7 8 9
do
ret=0
if test -f ns4/managed-keys.bind
then
grep KEYDATA ns4/managed-keys.bind > /dev/null &&
grep "next refresh:" ns4/managed-keys.bind > /dev/null &&
break
fi
ret=1
sleep 1
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check dig's +nocrypto flag ($n)"
ret=0
$DIG $DIGOPTS +norec +nocrypto DNSKEY . \
@10.53.0.1 > dig.out.dnskey.ns1.test$n || ret=1
grep '256 3 [0-9][0-9]* \[key id = [1-9][0-9]*]' dig.out.dnskey.ns1.test$n > /dev/null || ret=1
grep 'RRSIG.* \[omitted]' dig.out.dnskey.ns1.test$n > /dev/null || ret=1
$DIG $DIGOPTS +norec +nocrypto DS example \
@10.53.0.1 > dig.out.ds.ns1.test$n || ret=1
grep 'DS.* [0-9][0-9]* [12] \[omitted]' dig.out.ds.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check simultaneous inactivation and publishing of dnskeys removes inactive signature ($n)"
ret=0
cnt=0
while :
do
$DIG $DIGOPTS publish-inactive.example @10.53.0.3 dnskey > dig.out.ns3.test$n
keys=`awk '$5 == 257 { print; }' dig.out.ns3.test$n | wc -l`
test $keys -gt 2 && break
cnt=`expr $cnt + 1`
test $cnt -gt 120 && break
sleep 1
done
test $keys -gt 2 || ret=1
sigs=`grep RRSIG dig.out.ns3.test$n | wc -l`
sigs=`expr $sigs + 0`
n=`expr $n + 1`
test $sigs -eq 2 || ret=1
if test $ret != 0 ; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that increasing the sig-validity-interval resigning triggers re-signing"
ret=0
before=`$DIG axfr siginterval.example -p ${PORT} @10.53.0.3 | grep RRSIG.SOA`
cp ns3/siginterval2.conf ns3/siginterval.conf
$RNDCCMD 10.53.0.3 reconfig 2>&1 | sed 's/^/ns3 /' | cat_i
for i in 1 2 3 4 5 6 7 8 9 0
do
after=`$DIG axfr siginterval.example -p ${PORT} @10.53.0.3 | grep RRSIG.SOA`
test "$before" != "$after" && break
sleep 1
done
n=`expr $n + 1`
if test "$before" = "$after" ; then echo_i "failed"; ret=1; fi
status=`expr $status + $ret`
copy_setports ns4/named4.conf.in ns4/named.conf
$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/I:ns4 /'
sleep 3
echo_i "check insecure delegation between static-stub zones ($n)"
ret=0
$DIG $DIGOPTS ns insecure.secure.example \
@10.53.0.4 > dig.out.ns4.1.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.1.test$n > /dev/null && ret=1
$DIG $DIGOPTS ns secure.example \
@10.53.0.4 > dig.out.ns4.2.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.2.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check the acceptance of seconds as inception and expiration times ($n)"
ret=0
in="NSEC 8 0 86400 1390003200 1389394800 33655 . NYWjZYBV1b+h4j0yu/SmPOOylR8P4IXKDzHX3NwEmU1SUp27aJ91dP+i+UBcnPmBib0hck4DrFVvpflCEpCnVQd2DexcN0GX+3PM7XobxhtDlmnU X1L47zJlbdHNwTqHuPaMM6Xy9HGMXps7O5JVyfggVhTz2C+G5OVxBdb2rOo="
exp="NSEC 8 0 86400 20140118000000 20140110230000 33655 . NYWjZYBV1b+h4j0yu/SmPOOylR8P4IXKDzHX3NwEmU1SUp27aJ91dP+i +UBcnPmBib0hck4DrFVvpflCEpCnVQd2DexcN0GX+3PM7XobxhtDlmnU X1L47zJlbdHNwTqHuPaMM6Xy9HGMXps7O5JVyfggVhTz2C+G5OVxBdb2 rOo="
out=`echo "IN RRSIG $in" | $RRCHECKER -p | sed 's/^IN.RRSIG.//'`
[ "$out" = "$exp" ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check the correct resigning time is reported in zonestatus ($n)"
ret=0
$RNDCCMD 10.53.0.3 \
zonestatus secure.example > rndc.out.ns3.test$n
# next resign node: secure.example/DNSKEY
name=`awk '/next resign node:/ { print $4 }' rndc.out.ns3.test$n | sed 's;/; ;'`
# next resign time: Thu, 24 Apr 2014 10:38:16 GMT
time=`awk 'BEGIN { m["Jan"] = "01"; m["Feb"] = "02"; m["Mar"] = "03";
m["Apr"] = "04"; m["May"] = "05"; m["Jun"] = "06";
m["Jul"] = "07"; m["Aug"] = "08"; m["Sep"] = "09";
m["Oct"] = "10"; m["Nov"] = "11"; m["Dec"] = "12";}
/next resign time:/ { printf "%d%s%02d%s\n", $7, m[$6], $5, $8 }' rndc.out.ns3.test$n | sed 's/://g'`
$DIG $DIGOPTS +noall +answer $name @10.53.0.3 > dig.out.test$n
expire=`awk '$4 == "RRSIG" { print $9 }' dig.out.test$n`
inception=`awk '$4 == "RRSIG" { print $10 }' dig.out.test$n`
$PERL -e 'exit(0) if ("'"$time"'" lt "'"$expire"'" && "'"$time"'" gt "'"$inception"'"); exit(1);' || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that split rrsigs are handled ($n)"
ret=0
$DIG $DIGOPTS split-rrsig soa @10.53.0.7 > dig.out.test$n || ret=1
awk 'BEGIN { ok=0; } $4 == "SOA" { if ($7 > 1) ok=1; } END { if (!ok) exit(1); }' dig.out.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that 'dnssec-keygen -S' works for all supported algorithms ($n)"
ret=0
alg=1
until test $alg = 256
do
size=
case $alg in
1) size="-b 512";;
2) # Diffie Helman
alg=`expr $alg + 1`
continue;;
3) size="-b 512";;
5) size="-b 512";;
6) size="-b 512";;
7) size="-b 512";;
8) size="-b 512";;
10) size="-b 1024";;
157|160|161|162|163|164|165) # private - non standard
alg=`expr $alg + 1`
continue;;
esac
key1=`$KEYGEN -a $alg $size -I now+4d -r $RANDFILE example 2> keygen.err`
if grep "unsupported algorithm" keygen.err > /dev/null
then
alg=`expr $alg + 1`
continue
fi
if test -z "$key1"
then
echo_i "'$KEYGEN -a $alg': failed"
cat keygen.err
ret=1
alg=`expr $alg + 1`
continue
fi
key2=`$KEYGEN -v 10 -r $RANDFILE -i 3d -S $key1.private 2> /dev/null`
test -f $key2.key -a -f $key2.private || {
ret=1
echo_i "'dnssec-keygen -S' failed for algorithm: $alg"
}
alg=`expr $alg + 1`
done
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that CDS records are signed using KSK by dnssec-signzone ($n)"
ret=0
$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 2 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
#
# Test for +sigchase with a null set of trusted keys.
#
$DIG $DIGOPTS @10.53.0.3 +sigchase +trusted-key=/dev/null > dig.out.ns3.test$n 2>&1
if grep "Invalid option: +sigchase" dig.out.ns3.test$n > /dev/null
then
echo_i "Skipping 'dig +sigchase' tests"
n=`expr $n + 1`
else
echo_i "checking that 'dig +sigchase' doesn't loop with future inception ($n)"
ret=0
$DIG $DIGOPTS @10.53.0.3 dnskey future.example +sigchase \
+trusted-key=ns3/trusted-future.key > dig.out.ns3.test$n &
pid=$!
sleep 1
$KILL -9 $pid 2> /dev/null
wait $pid
grep ";; No DNSKEY is valid to check the RRSIG of the RRset: FAILED" dig.out.ns3.test$n > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
n=`expr $n + 1`
fi
echo_i "checking that positive unknown NSEC3 hash algorithm does validate ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 nsec3-unknown.example SOA > dig.out.ns3.test$n
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 nsec3-unknown.example SOA > dig.out.ns4.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that CDS records are signed using KSK by with dnssec-auto ($n)"
ret=0
$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-auto.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 2 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a lone non matching CDS record is rejected ($n)"
ret=0
(
echo zone cds-update.secure
echo server 10.53.0.2 ${PORT}
echo update delete cds-update.secure CDS
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure |
grep "DNSKEY.257" | sed 's/DNSKEY.257/DNSKEY 258/' |
$DSFROMKEY -C -A -f - -T 1 cds-update.secure |
sed "s/^/update add /"
echo send
) | $NSUPDATE > nsupdate.out.test$n 2>&1
grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1
$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-update.secure > dig.out.test$n
lines=`awk '$4 == "CDS" {print}' dig.out.test$n | wc -l`
test ${lines:-10} -eq 0 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a CDS deletion record is accepted ($n)"
ret=0
(
echo zone cds-update.secure
echo server 10.53.0.2 "$PORT"
echo update delete cds-update.secure CDS
echo update add cds-update.secure 0 CDS 0 0 0 00
echo send
) | $NSUPDATE > nsupdate.out.test$n 2>&1
$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-update.secure > dig.out.test$n
lines=`awk '$4 == "CDS" {print}' dig.out.test$n | wc -l`
test "${lines:-10}" -eq 1 || ret=1
lines=`tr -d '\r' < dig.out.test$n | awk '$4 == "CDS" && $5 == "0" && $6 == "0" && $7 == "0" && $8 == "00" {print}' | wc -l`
test "$lines" -eq 1 || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "check that CDS records are signed using KSK when added by nsupdate ($n)"
ret=0
(
echo zone cds-update.secure
echo server 10.53.0.2 ${PORT}
echo update delete cds-update.secure CDS
echo send
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure |
grep "DNSKEY.257" |
$DSFROMKEY -C -f - -T 1 cds-update.secure |
sed "s/^/update add /"
echo send
) | $NSUPDATE
$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-update.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l`
test "$lines" -eq 2 || ret=1
lines=`awk '$4 == "CDS" {print}' dig.out.test$n | wc -l`
test "$lines" -eq 2 || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that positive unknown NSEC3 hash algorithm with OPTOUT does validate ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 optout-unknown.example SOA > dig.out.ns3.test$n
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 optout-unknown.example SOA > dig.out.ns4.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a non matching CDS record is accepted with a matching CDS record ($n)"
ret=0
(
echo zone cds-update.secure
echo server 10.53.0.2 ${PORT}
echo update delete cds-update.secure CDS
echo send
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure |
grep "DNSKEY.257" |
$DSFROMKEY -C -f - -T 1 cds-update.secure |
sed "s/^/update add /"
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure |
grep "DNSKEY.257" | sed 's/DNSKEY.257/DNSKEY 258/' |
$DSFROMKEY -C -A -f - -T 1 cds-update.secure |
sed "s/^/update add /"
echo send
) | $NSUPDATE
$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-update.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 2 || ret=1
lines=`awk '$4 == "CDS" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 4 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that negative unknown NSEC3 hash algorithm does not validate ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 nsec3-unknown.example A > dig.out.ns3.test$n
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 nsec3-unknown.example A > dig.out.ns4.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: SERVFAIL," dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that CDNSKEY records are signed using KSK by dnssec-signzone ($n)"
ret=0
$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 2 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that negative unknown NSEC3 hash algorithm with OPTOUT does not validate ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 optout-unknown.example A > dig.out.ns3.test$n
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 optout-unknown.example A > dig.out.ns4.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: SERVFAIL," dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that CDNSKEY records are signed using KSK by with dnssec-auto ($n)"
ret=0
$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-auto.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 2 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that unknown DNSKEY algorithm validates as insecure ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 dnskey-unknown.example A > dig.out.ns3.test$n
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 dnskey-unknown.example A > dig.out.ns4.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking that unsupported DNSKEY algorithm validates as insecure ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 dnskey-unsupported.example A > dig.out.ns3.test$n
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 dnskey-unsupported.example A > dig.out.ns4.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that unsupported DNSKEY algorithm is in DNSKEY RRset ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 dnskey-unsupported-2.example DNSKEY > dig.out.test$n
grep "status: NOERROR," dig.out.test$n > /dev/null || ret=1
grep "dnskey-unsupported-2\.example\..*IN.*DNSKEY.*257 3 255" dig.out.test$n > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "check that a lone non matching CDNSKEY record is rejected ($n)"
ret=0
(
echo zone cdnskey-update.secure
echo server 10.53.0.2 ${PORT}
echo update delete cdnskey-update.secure CDNSKEY
echo send
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure |
sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 258/p'
echo send
) | $NSUPDATE > nsupdate.out.test$n 2>&1
grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1
$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-update.secure > dig.out.test$n
lines=`awk '$4 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test ${lines:-10} -eq 0 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a CDNSKEY deletion record is accepted ($n)"
ret=0
(
echo zone cdnskey-update.secure
echo server 10.53.0.2 "$PORT"
echo update delete cdnskey-update.secure CDNSKEY
echo update add cdnskey-update.secure 0 CDNSKEY 0 3 0 AA==
echo send
) | $NSUPDATE > nsupdate.out.test$n 2>&1
$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-update.secure > dig.out.test$n
lines=`awk '$4 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test "${lines:-10}" -eq 1 || ret=1
lines=`tr -d '\r' < dig.out.test$n | awk '$4 == "CDNSKEY" && $5 == "0" && $6 == "3" && $7 == "0" && $8 == "AA==" {print}' | wc -l`
test "${lines:-10}" -eq 1 || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that unknown DNSKEY algorithm + unknown NSEC3 has algorithm validates as insecure ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 dnskey-nsec3-unknown.example A > dig.out.ns3.test$n
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 dnskey-nsec3-unknown.example A > dig.out.ns4.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that CDNSKEY records are signed using KSK when added by nsupdate ($n)"
ret=0
(
echo zone cdnskey-update.secure
echo server 10.53.0.2 ${PORT}
echo update delete cdnskey-update.secure CDNSKEY
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure |
sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 257/p'
echo send
) | $NSUPDATE
$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-update.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test "$lines" -eq 2 || ret=1
lines=`awk '$4 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking initialization with a revoked managed key ($n)"
ret=0
copy_setports ns5/named2.conf.in ns5/named.conf
$RNDCCMD 10.53.0.5 reconfig 2>&1 | sed 's/^/ns5 /' | cat_i
sleep 3
$DIG $DIGOPTS +dnssec @10.53.0.5 SOA . > dig.out.ns5.test$n
grep "status: SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a non matching CDNSKEY record is accepted with a matching CDNSKEY record ($n)"
ret=0
(
echo zone cdnskey-update.secure
echo server 10.53.0.2 ${PORT}
echo update delete cdnskey-update.secure CDNSKEY
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure |
sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 257/p'
$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure |
sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 258/p'
echo send
) | $NSUPDATE
$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-update.secure > dig.out.test$n
lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 2 || ret=1
lines=`awk '$4 == "CDNSKEY" {print}' dig.out.test$n | wc -l`
test ${lines:-0} -eq 2 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that RRSIGs are correctly removed from apex when RRset is removed NSEC ($n)"
ret=0
# generate signed zone with MX and AAAA records at apex.
(
cd signer
$KEYGEN -q -r $RANDFILE -3 -fK remove > /dev/null
$KEYGEN -q -r $RANDFILE -3 remove > /dev/null
echo > remove.db.signed
$SIGNER -S -o remove -D -f remove.db.signed remove.db.in > signer.out.1.$n 2>&1
)
grep "RRSIG MX" signer/remove.db.signed > /dev/null || {
ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.pre$n;
}
# re-generate signed zone without MX and AAAA records at apex.
(
cd signer
$SIGNER -S -o remove -D -f remove.db.signed remove2.db.in > signer.out.2.$n 2>&1
)
grep "RRSIG MX" signer/remove.db.signed > /dev/null && {
ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.post$n;
}
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that RRSIGs are correctly removed from apex when RRset is removed NSEC3 ($n)"
ret=0
# generate signed zone with MX and AAAA records at apex.
(
cd signer
echo > remove.db.signed
$SIGNER -3 - -S -o remove -D -f remove.db.signed remove.db.in > signer.out.1.$n 2>&1
)
grep "RRSIG MX" signer/remove.db.signed > /dev/null || {
ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.pre$n;
}
# re-generate signed zone without MX and AAAA records at apex.
(
cd signer
$SIGNER -3 - -S -o remove -D -f remove.db.signed remove2.db.in > signer.out.2.$n 2>&1
)
grep "RRSIG MX" signer/remove.db.signed > /dev/null && {
ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.post$n;
}
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that a named managed zone that was signed 'in-the-future' is re-signed when loaded ($n)"
ret=0
$DIG $DIGOPTS managed-future.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that trust-anchor-telemetry queries are logged ($n)"
ret=0
grep "sending trust-anchor-telemetry query '_ta-[0-9a-f]*/NULL" ns6/named.run > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that _ta-XXXX trust-anchor-telemetry queries are logged ($n)"
ret=0
grep "trust-anchor-telemetry '_ta-[0-9a-f]*/IN' from" ns1/named.run > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that _ta-AAAA trust-anchor-telemetry are not sent when disabled ($n)"
ret=0
grep "sending trust-anchor-telemetry query '_ta-[0-9a-f]*/IN" ns1/named.run > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that KEY-TAG trust-anchor-telemetry queries are logged ($n)"
ret=0
$DIG $DIGOPTS . dnskey +ednsopt=KEY-TAG:ffff @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep "trust-anchor-telemetry './IN' from .* 65535" ns1/named.run > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that multiple KEY-TAG trust-anchor-telemetry options don't leak memory ($n)"
ret=0
$DIG $DIGOPTS . dnskey +ednsopt=KEY-TAG:fffe +ednsopt=KEY-TAG:fffd @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep "trust-anchor-telemetry './IN' from .* 65534" ns1/named.run > /dev/null || ret=1
grep "trust-anchor-telemetry './IN' from .* 65533" ns1/named.run > /dev/null && ret=1
$PERL $SYSTEMTESTTOP/stop.pl dnssec ns1 || ret=1
nextpart ns1/named.run > /dev/null
$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} dnssec ns1 || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "waiting for root server to finish reloading ($n)"
ret=0
wait_for_log "all zones loaded" ns1/named.run || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "check that DNAME at apex with NSEC3 is correctly signed (dnssec-signzone) ($n)"
ret=0
$DIG $DIGOPTS txt dname-at-apex-nsec3.example @10.53.0.3 > dig.out.ns3.test$n || ret=1
grep "RRSIG.NSEC3 8 3 3600" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that DNSKEY and other occluded data are excluded from the delegating bitmap ($n)"
ret=0
$DIG $DIGOPTS axfr occluded.example @10.53.0.3 > dig.out.ns3.test$n || ret=1
grep "^delegation.occluded.example..*NSEC.*NS KEY DS RRSIG NSEC$" dig.out.ns3.test$n > /dev/null || ret=1
grep "^delegation.occluded.example..*DNSKEY.*" dig.out.ns3.test$n > /dev/null || ret=1
grep "^delegation.occluded.example..*AAAA.*" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
###
### Additional checks for when the KSK is offline.
###
# Save some useful information
zone="updatecheck-kskonly.secure"
KSK=`cat ns2/${zone}.ksk.key`
ZSK=`cat ns2/${zone}.zsk.key`
KSK_ID=`cat ns2/${zone}.ksk.id`
ZSK_ID=`cat ns2/${zone}.zsk.id`
SECTIONS="+answer +noauthority +noadditional"
echo_i "testing zone $zone KSK=$KSK_ID ZSK=$ZSK_ID"
# Print IDs of keys used for generating RRSIG records for RRsets of type $1
# found in dig output file $2.
get_keys_which_signed() {
qtype=$1
output=$2
# The key ID is the 11th column of the RRSIG record line.
awk -v qt="$qtype" '$4 == "RRSIG" && $5 == qt {print $11}' < "$output"
}
# Basic checks to make sure everything is fine before the KSK is made offline.
echo_i "checking DNSKEY RRset is signed with KSK only (update-check-ksk, dnssec-ksk-only) ($n)"
ret=0
$DIG $DIGOPTS $SECTIONS @10.53.0.2 DNSKEY $zone > dig.out.test$n
lines=`get_keys_which_signed "DNSKEY" dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$KSK_ID$" > /dev/null || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID$" > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking SOA RRset is signed with ZSK only (update-check-ksk, dnssec-ksk-only) ($n)"
ret=0
$DIG $DIGOPTS $SECTIONS @10.53.0.2 soa $zone > dig.out.test$n
lines=`get_keys_which_signed "SOA" dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
get_keys_which_signed "SOA" dig.out.test$n | grep "^$KSK_ID$" > /dev/null && ret=1
get_keys_which_signed "SOA" dig.out.test$n | grep "^$ZSK_ID$" > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# Roll the ZSK.
zsk2=`$KEYGEN -q -r $RANDFILE -a RSASHA1 -b 1024 -K ns2 -n zone $zone`
keyfile_to_key_id "$zsk2" > ns2/$zone.zsk.id2
ZSK_ID2=`cat ns2/$zone.zsk.id2`
echo_i "load new ZSK $ZSK_ID2 for $zone ($n)"
ret=0
dnssec_loadkeys_on 2 $zone || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# Wait until new ZSK becomes active.
echo_i "make ZSK $ZSK_ID inactive and make new ZSK $ZSK_ID2 active for zone $zone ($n)"
ret=0
$SETTIME -I now -K ns2 $ZSK > /dev/null
$SETTIME -A now -K ns2 $zsk2 > /dev/null
dnssec_loadkeys_on 2 $zone || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# Remove the KSK from disk.
echo_i "remove the KSK $KSK_ID for zone $zone from disk"
mv ns2/$KSK.key ns2/$KSK.key.bak
mv ns2/$KSK.private ns2/$KSK.private.bak
# Update the zone that requires a resign of the SOA RRset.
echo_i "update the zone with $zone IN TXT nsupdate added me"
(
echo zone $zone
echo server 10.53.0.2 "$PORT"
echo update add $zone. 300 in txt "nsupdate added me"
echo send
) | $NSUPDATE
# Redo the tests now that the zone is updated and the KSK is offline.
echo_i "checking DNSKEY RRset is signed with KSK only, KSK offline (update-check-ksk, dnssec-ksk-only) ($n)"
ret=0
$DIG $DIGOPTS $SECTIONS @10.53.0.2 DNSKEY $zone > dig.out.test$n
lines=`get_keys_which_signed "DNSKEY" dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$KSK_ID$" > /dev/null || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID$" > /dev/null && ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID2$" > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
for qtype in "SOA" "TXT"
do
echo_i "checking $qtype RRset is signed with ZSK only, KSK offline (update-check-ksk and dnssec-ksk-only) ($n)"
ret=0
$DIG $DIGOPTS $SECTIONS @10.53.0.2 $qtype $zone > dig.out.test$n
lines=`get_keys_which_signed $qtype dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
get_keys_which_signed $qtype dig.out.test$n | grep "^$KSK_ID$" > /dev/null && ret=1
get_keys_which_signed $qtype dig.out.test$n | grep "^$ZSK_ID$" > /dev/null && ret=1
get_keys_which_signed $qtype dig.out.test$n | grep "^$ZSK_ID2$" > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
done
# Put back the KSK.
echo_i "put back the KSK $KSK_ID for zone $zone from disk"
mv ns2/$KSK.key.bak ns2/$KSK.key
mv ns2/$KSK.private.bak ns2/$KSK.private
# Roll the ZSK again.
zsk3=`$KEYGEN -q -r $RANDFILE -a RSASHA1 -b 1024 -K ns2 -n zone $zone`
keyfile_to_key_id "$zsk3" > ns2/$zone.zsk.id3
ZSK_ID3=`cat ns2/$zone.zsk.id3`
echo_i "load new ZSK $ZSK_ID3 for $zone ($n)"
ret=0
dnssec_loadkeys_on 2 $zone || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# Wait until new ZSK becomes active.
echo_i "delete old ZSK $ZSK_ID make ZSK $ZSK_ID2 inactive and make new ZSK $ZSK_ID3 active for zone $zone ($n)"
$SETTIME -D now -K ns2 $ZSK > /dev/null
$SETTIME -I +5 -K ns2 $zsk2 > /dev/null
$SETTIME -A +5 -K ns2 $zsk3 > /dev/null
dnssec_loadkeys_on 2 $zone || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# Remove the KSK from disk.
echo_i "remove the KSK $KSK_ID for zone $zone from disk"
mv ns2/$KSK.key ns2/$KSK.key.bak
mv ns2/$KSK.private ns2/$KSK.private.bak
# Update the zone that requires a resign of the SOA RRset.
echo_i "update the zone with $zone IN TXT nsupdate added me again"
(
echo zone $zone
echo server 10.53.0.2 "$PORT"
echo update add $zone. 300 in txt "nsupdate added me again"
echo send
) | $NSUPDATE
# Redo the tests now that the ZSK roll has deleted the old key.
echo_i "checking DNSKEY RRset is signed with KSK only, old ZSK deleted (update-check-ksk, dnssec-ksk-only) ($n)"
ret=0
$DIG $DIGOPTS $SECTIONS @10.53.0.2 DNSKEY $zone > dig.out.test$n
lines=`get_keys_which_signed "DNSKEY" dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$KSK_ID$" > /dev/null || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID$" > /dev/null && ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID2$" > /dev/null && ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID3$" > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
for qtype in "SOA" "TXT"
do
echo_i "checking $qtype RRset is signed with ZSK only, old ZSK deleted (update-check-ksk and dnssec-ksk-only) ($n)"
ret=0
$DIG $DIGOPTS $SECTIONS @10.53.0.2 $qtype $zone > dig.out.test$n
lines=`get_keys_which_signed $qtype dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
get_keys_which_signed $qtype dig.out.test$n | grep "^$KSK_ID$" > /dev/null && ret=1
get_keys_which_signed $qtype dig.out.test$n | grep "^$ZSK_ID$" > /dev/null && ret=1
get_keys_which_signed $qtype dig.out.test$n | grep "^$ZSK_ID2$" > /dev/null || ret=1
get_keys_which_signed $qtype dig.out.test$n | grep "^$ZSK_ID3$" > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
done
# Wait for newest ZSK to become active.
echo_i "wait until new ZSK $ZSK_ID3 active and ZSK $ZSK_ID2 inactive"
for i in 1 2 3 4 5 6 7 8 9 10; do
ret=0
grep "add re-sign updatecheck-kskonly\.secure\..*RRSIG.*SOA.*$ZSK_ID3.*$zone.*" ns2/named.run > /dev/null || ret=1
[ "$ret" -eq 0 ] && break
sleep 1
done
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# Redo the tests one more time.
echo_i "checking DNSKEY RRset is signed with KSK only, new ZSK active (update-check-ksk, dnssec-ksk-only) ($n)"
ret=0
$DIG $DIGOPTS $SECTIONS @10.53.0.2 DNSKEY $zone > dig.out.test$n
lines=`get_keys_which_signed "DNSKEY" dig.out.test$n | wc -l`
test "$lines" -eq 1 || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$KSK_ID$" > /dev/null || ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID$" > /dev/null && ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID2$" > /dev/null && ret=1
get_keys_which_signed "DNSKEY" dig.out.test$n | grep "^$ZSK_ID3$" > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
#
# DNSSEC tests related to unsupported trust anchors.
#
# This nameserver (ns8) is loaded with a bunch of trust anchors. Some of them
# are good (enabled.managed, enabled.trusted, secure.managed, secure.trusted),
# and some of them are bad (unsupported.managed, unsupported.trusted). Make
# sure that the bad trust anchors are ignored. This is tested by looking for
# the corresponding lines in the logfile.
echo_i "checking that keys with unsupported algorithms are ignored ($n)"
ret=0
grep "skipping trusted key for 'unsupported\.trusted\.': algorithm is unsupported" ns8/named.run > /dev/null || ret=1
grep "skipping managed key for 'unsupported\.managed\.': algorithm is unsupported" ns8/named.run > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# The next two tests are fairly normal DNSSEC queries to signed zones with a
# default algorithm. First, a query is made against the server that is
# authoritative for the given zone (ns3). Second, a query is made against a
# resolver with trust anchors for the given zone (ns8). Both are expected to
# return an authentic data positive response.
echo_i "checking that a trusted key using a supported algorithm validates as secure ($n)"
ret=0
$DIG $DIGOPTS @10.53.0.3 a.secure.trusted A > dig.out.ns3.test$n
$DIG $DIGOPTS @10.53.0.8 a.secure.trusted A > dig.out.ns8.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns8.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns8.test$n > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that a managed key using a supported algorithm validates as secure ($n)"
ret=0
$DIG $DIGOPTS @10.53.0.3 a.secure.managed A > dig.out.ns3.test$n
$DIG $DIGOPTS @10.53.0.8 a.secure.managed A > dig.out.ns8.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns8.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns8.test$n > /dev/null || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
# The next two queries ensure that a zone signed with a DNSKEY with an unsupported
# algorithm will yield insecure positive responses. These trust anchors in ns8 are
# ignored and so this domain is treated as insecure. The AD bit should not be set
# in the response.
echo_i "checking that a trusted key using an unsupported algorithm validates as insecure ($n)"
ret=0
$DIG $DIGOPTS @10.53.0.3 a.unsupported.trusted A > dig.out.ns3.test$n
$DIG $DIGOPTS @10.53.0.8 a.unsupported.trusted A > dig.out.ns8.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns8.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns8.test$n > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking that a managed key using an unsupported algorithm validates as insecure ($n)"
ret=0
$DIG $DIGOPTS @10.53.0.3 a.unsupported.managed A > dig.out.ns3.test$n
$DIG $DIGOPTS @10.53.0.8 a.unsupported.managed A > dig.out.ns8.test$n
grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR," dig.out.ns8.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns8.test$n > /dev/null && ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "checking secroots output with multiple views ($n)"
$RNDCCMD 10.53.0.4 secroots 2>&1 | sed 's/^/ns4 /' | cat_i
cp ns4/named.secroots named.secroots.test$n
check_secroots_layout named.secroots.test$n || ret=1
n=`expr $n + 1`
test "$ret" -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "exit status: $status"
[ $status -eq 0 ] || exit 1
View Git Blame Copy Permalink