This commit was manufactured by cvs2git to create branch

'v9_6_ESV_R4_patch'.

.cvsignore

@@ -0,0 +1,9 @@
+Makefile
+config.log
+config.h
+config.cache
+config.status
+libtool
+isc-config.sh
+configure.lineno
+autom4te.cache

.gitattributes

@@ -1,2 +0,0 @@
-*.vcxproj.in eol=crlf
-*.vcxproj.filters.in eol=crlf

.gitignore

@@ -1,62 +0,0 @@
-Makefile
-config.log
-config.h
-config.cache
-config.status
-libtool
-/isc-config.sh
-/configure.lineno
-autom4te.cache/
-*.o
-*.lo
-*.so
-*.a
-*.la
-*.gcno
-*.gcda
-*_test
-*-symtbl.c
-timestamp
-ans.run
-lwresd.run
-named.run
-named.memstats
-gen.dSYM/
-.libs/
-.deps/
-.dirstamp
-unit/atf-src/atf-c++/atf-c++.pc
-unit/atf-src/atf-c/atf-c.pc
-unit/atf-src/atf-c/defs.h
-unit/atf-src/atf-c/detail/process_helpers
-unit/atf-src/atf-config/atf-config
-unit/atf-src/atf-report/atf-report
-unit/atf-src/atf-report/fail_helper
-unit/atf-src/atf-report/misc_helpers
-unit/atf-src/atf-report/pass_helper
-unit/atf-src/atf-run/atf-run
-unit/atf-src/atf-run/bad_metadata_helper
-unit/atf-src/atf-run/expect_helpers
-unit/atf-src/atf-run/misc_helpers
-unit/atf-src/atf-run/pass_helper
-unit/atf-src/atf-run/several_tcs_helper
-unit/atf-src/atf-run/zero_tcs_helper
-unit/atf-src/atf-sh/atf-check
-unit/atf-src/atf-sh/atf-sh
-unit/atf-src/atf-sh/misc_helpers
-unit/atf-src/atf-version/atf-version
-unit/atf-src/atf-version/revision.h
-unit/atf-src/atf-version/revision.h.stamp
-unit/atf-src/bconfig.h
-unit/atf-src/bootstrap/atconfig
-unit/atf-src/doc/atf.7
-unit/atf-src/stamp-h1
-unit/atf-src/test-programs/c_helpers
-unit/atf-src/test-programs/cpp_helpers
-unit/atf-src/test-programs/sh_helpers
-# ccc-analyzer store its results in .plist directories
-*.plist/
-*~
-.project
-.cproject
-.settings

Atffile

@@ -1,5 +0,0 @@
-Content-Type: application/X-atf-atffile; version="1"
-
-prop: test-suite = bind9
-
-tp: lib

COPYRIGHT

@@ -1,18 +1,21 @@
-Copyright (C) 1996-2017  Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 2004-2011  Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 1996-2003  Internet Software Consortium.
 
-This Source Code Form is subject to the terms of the Mozilla Public
-License, v. 2.0. If a copy of the MPL was not distributed with this
-file, You can obtain one at http://mozilla.org/MPL/2.0/.
+Permission to use, copy, modify, and/or distribute this software for any
+purpose with or without fee is hereby granted, provided that the above
+copyright notice and this permission notice appear in all copies.
 
- -----------------------------------------------------------------------------
+THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
 
-	Portions of this code release fall under one or more of the
-	following Copyright notices.  Please see individual source
-	files for details.
+$Id: COPYRIGHT,v 1.14.176.3 2011/01/04 23:45:42 tbox Exp $
 
-	For binary releases also see: OpenSSL-LICENSE.
-
-Copyright (C) 1996-2001  Nominum, Inc.
+Portions Copyright (C) 1996-2001  Nominum, Inc.
 
 Permission to use, copy, modify, and distribute this software for any
 purpose with or without fee is hereby granted, provided that the above
@@ -25,570 +28,3 @@ ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
 OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 1995-2000 by Network Associates, Inc.
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND ISC AND NETWORK ASSOCIATES DISCLAIMS
-ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE
-FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
-IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 2002 Stichting NLnet, Netherlands, stichting@nlnet.nl.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the
-above copyright notice and this permission notice appear in all
-copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND STICHTING NLNET
-DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-STICHTING NLNET BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-USE OR PERFORMANCE OF THIS SOFTWARE.
-
-The development of Dynamically Loadable Zones (DLZ) for Bind 9 was
-conceived and contributed by Rob Butler.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the
-above copyright notice and this permission notice appear in all
-copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND ROB BUTLER
-DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-ROB BUTLER BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1987, 1990, 1993, 1994
-     The Regents of the University of California.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the University nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) The Internet Society 2005.  This version of
-this module is part of RFC 4178; see the RFC itself for
-full legal notices.
-
-(The above copyright notice is per RFC 3978 5.6 (a), q.v.)
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 2004 Masarykova universita
-(Masaryk University, Brno, Czech Republic)
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-3. Neither the name of the University nor the names of its contributors may
-   be used to endorse or promote products derived from this software
-   without specific prior written permission.
- 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1997 - 2003 Kungliga Tekniska Högskolan
-(Royal Institute of Technology, Stockholm, Sweden). 
-All rights reserved. 
-
-Redistribution and use in source and binary forms, with or without 
-modification, are permitted provided that the following conditions 
-are met: 
-
-1. Redistributions of source code must retain the above copyright 
-   notice, this list of conditions and the following disclaimer. 
-
-2. Redistributions in binary form must reproduce the above copyright 
-   notice, this list of conditions and the following disclaimer in the 
-   documentation and/or other materials provided with the distribution. 
-
-3. Neither the name of the Institute nor the names of its contributors 
-   may be used to endorse or promote products derived from this software 
-   without specific prior written permission. 
-
-THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
-ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
-SUCH DAMAGE. 
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1998 Doug Rabson
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright ((c)) 2002, Rice University
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-    * Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-
-    * Redistributions in binary form must reproduce the above
-    copyright notice, this list of conditions and the following
-    disclaimer in the documentation and/or other materials provided
-    with the distribution.
-
-    * Neither the name of Rice University (RICE) nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-
-
-This software is provided by RICE and the contributors on an "as is"
-basis, without any representations or warranties of any kind, express
-or implied including, but not limited to, representations or
-warranties of non-infringement, merchantability or fitness for a
-particular purpose. In no event shall RICE or contributors be liable
-for any direct, indirect, incidental, special, exemplary, or
-consequential damages (including, but not limited to, procurement of
-substitute goods or services; loss of use, data, or profits; or
-business interruption) however caused and on any theory of liability,
-whether in contract, strict liability, or tort (including negligence
-or otherwise) arising in any way out of the use of this software, even
-if advised of the possibility of such damage.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1993 by Digital Equipment Corporation.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies, and that
-the name of Digital Equipment Corporation not be used in advertising or
-publicity pertaining to distribution of the document or software without
-specific, written prior permission.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
-WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
-CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
-DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
-ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright 2000 Aaron D. Gifford.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the copyright holder nor the names of contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
- 
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) AND CONTRIBUTOR(S) ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR(S) OR CONTRIBUTOR(S) BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1998 Doug Rabson.
-Copyright (c) 2001 Jake Burkholder.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the project nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1999-2000 by Nortel Networks Corporation
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND NORTEL NETWORKS DISCLAIMS
-ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NORTEL NETWORKS
-BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 2000-2002 Japan Network Information Center.  All rights reserved.
- 
-By using this file, you agree to the terms and conditions set forth bellow.
-
-                        LICENSE TERMS AND CONDITIONS 
-
-The following License Terms and Conditions apply, unless a different
-license is obtained from Japan Network Information Center ("JPNIC"),
-a Japanese association, Kokusai-Kougyou-Kanda Bldg 6F, 2-3-4 Uchi-Kanda,
-Chiyoda-ku, Tokyo 101-0047, Japan.
-
-1. Use, Modification and Redistribution (including distribution of any
-   modified or derived work) in source and/or binary forms is permitted
-   under this License Terms and Conditions.
-
-2. Redistribution of source code must retain the copyright notices as they
-   appear in each source code file, this License Terms and Conditions.
-
-3. Redistribution in binary form must reproduce the Copyright Notice,
-   this License Terms and Conditions, in the documentation and/or other
-   materials provided with the distribution.  For the purposes of binary
-   distribution the "Copyright Notice" refers to the following language:
-   "Copyright (c) 2000-2002 Japan Network Information Center.  All rights
-   reserved."
-
-4. The name of JPNIC may not be used to endorse or promote products
-   derived from this Software without specific prior written approval of
-   JPNIC.
-
-5. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY JPNIC
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL JPNIC BE LIABLE
-   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-   BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-   ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 2004  Nominet, Ltd.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND NOMINET DISCLAIMS ALL WARRANTIES WITH
-REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Portions Copyright RSA Security Inc.
-
-License to copy and use this software is granted provided that it is
-identified as "RSA Security Inc. PKCS #11 Cryptographic Token Interface
-(Cryptoki)" in all material mentioning or referencing this software.
-
-License is also granted to make and use derivative works provided that
-such works are identified as "derived from the RSA Security Inc. PKCS #11
-Cryptographic Token Interface (Cryptoki)" in all material mentioning or
-referencing the derived work.
-
-RSA Security Inc. makes no representations concerning either the
-merchantability of this software or the suitability of this software for
-any particular purpose. It is provided "as is" without express or implied
-warranty of any kind.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1996, David Mazieres <dm@uun.org>
-Copyright (c) 2008, Damien Miller <djm@openbsd.org>
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
------------------------------------------------------------------------------
-
-Copyright (c) 2000-2001 The OpenSSL Project.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in
-   the documentation and/or other materials provided with the
-   distribution.
-
-3. All advertising materials mentioning features or use of this
-   software must display the following acknowledgment:
-   "This product includes software developed by the OpenSSL Project
-   for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
-
-4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
-   endorse or promote products derived from this software without
-   prior written permission. For written permission, please contact
-   licensing@OpenSSL.org.
-
-5. Products derived from this software may not be called "OpenSSL"
-   nor may "OpenSSL" appear in their names without prior written
-   permission of the OpenSSL Project.
-
-6. Redistributions of any form whatsoever must retain the following
-   acknowledgment:
-   "This product includes software developed by the OpenSSL Project
-   for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
-
-THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
-EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
-ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-OF THE POSSIBILITY OF SUCH DAMAGE.
-
------------------------------------------------------------------------------
-
-Copyright (c) 1995, 1997, 1998 The NetBSD Foundation, Inc.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
------------------------------------------------------------------------------
-
-Copyright (C) 2008-2011  Red Hat, Inc.
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND Red Hat DISCLAIMS ALL WARRANTIES WITH
-REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-AND FITNESS.  IN NO EVENT SHALL Red Hat BE LIABLE FOR ANY SPECIAL, DIRECT,
-INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
-
------------------------------------------------------------------------------
-
-Copyright (c) 2013-2014, Farsight Security, Inc.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-1. Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-notice, this list of conditions and the following disclaimer in the
-documentation and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
------------------------------------------------------------------------------
-
-Copyright (c) 2014 by Farsight Security, Inc.
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-   http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.

EXCLUDED

@@ -0,0 +1,434 @@
+3005.   [port]          Solaris: Work around the lack of
+                        gsskrb5_register_acceptor_identity() by setting
+                        the KRB5_KTNAME environment variable to the
+                        contents of tkey-gssapi-keytab.  Also fixed
+                        test errors on MacOSX.  [RT #22853]
+
+3003.   [experimental]  Added update-policy match type "external",
+                        enabling named to defer the decision of whether to
+                        allow a dynamic update to an external daemon.
+                        (Contributed by Andrew Tridgell.) [RT #22758]
+
+3000.   [bug]           More TKEY/GSS fixes:
+                         - nsupdate can now get the default realm from
+                           the user's Kerberos principal
+                         - corrected gsstest compilation flags
+                         - improved documentation
+                         - fixed some NULL dereferences
+                        [RT #22795]
+
+2992.   [contrib]       contrib/check-secure-delegation.pl:  A simple tool
+                        for looking at a secure delegation. [RT #22059]
+
+2991.   [contrib]       contrib/zone-edit.sh: A simple zone editing tool for
+                        dynamic zones. [RT #22365]
+
+2990.   [bug]           'dnssec-settime -S' no longer tests prepublication
+                        interval validity when the interval is set to 0.
+                        [RT #22761]
+
+2988.   [experimental]  Added a "dlopen" DLZ driver, allowing the creation
+                        of external DLZ drivers that can be loaded as
+                        shared objects at runtime rather than linked with
+                        named.  Currently this is switched on via a
+                        compile-time option, "configure --with-dlz-dlopen".
+                        Note: the syntax for configuring DLZ zones
+                        is likely to be refined in future releases.
+                        (Contributed by Andrew Tridgell of the Samba
+                        project.) [RT #22629]
+
+2985.   [bug]           Add a regression test for change #2896. [RT #21324]
+
+2983.   [bug]           Include "loadkeys" in rndc help output. [RT #22493]
+
+2980.   [bug]           named didn't properly handle UPDATES that changed the
+                        TTL of the NSEC3PARAM RRset. [RT #22363]
+
+2977.   [bug]           'nsupdate -l' report if the session key is missing.
+                        [RT #21670]
+
+2973.   [bug]           bind.keys.h was being removed by the "make clean"
+                        at the end of configure resulting in build failures
+                        where there is very old version of perl installed.
+                        Move it to "make maintainer-clean". [RT #22230]
+
+2963.   [security]      The allow-query acl was being applied instead of the
+                        allow-query-cache acl to cache lookups. [RT #22114]
+
+2961.   [bug]           Be still more selective about the non-authoritative
+                        answers we apply change 2748 to. [RT #22074]
+
+2949.   [bug]           dns_view_setnewzones() contained a memory leak if
+                        it was called multiple times. [RT #21942]
+
+2948.   [port]          MacOS: provide a mechanism to configure the test
+                        interfaces at reboot. See bin/tests/system/README
+                        for details.
+
+2940.   [port]          Remove connection aborted error message on
+                        Windows. [RT #21549]
+
+2938.   [bug]           When generating signed responses, from a signed zone
+                        that uses NSEC3, named would use a uninitialised
+                        pointer if it needed to skip a NSEC3 record because
+                        it didn't match the selected NSEC3PARAM record for
+                        zone. [RT# 21868]
+
+2930.   [experimental]  New "rndc addzone" and "rndc delzone" commads
+                        allow dynamic addition and deletion of zones.
+                        To enable this feature, specify a "new-zone-file"
+                        option at the view or options level in named.conf.
+                        Zone configuration information for the new zones
+                        will be written into that file.  To make the new
+                        zones persist after a restart, "include" the file
+                        into named.conf in the appropriate view.  (Note:
+                        This feature is not yet documented, and its syntax
+                        is expected to change.) [RT #19447]
+
+2928.   [bug]           Be more selective about the non-authoritative
+                        answer we apply change 2748 to. [RT #21594]
+
+2914.   [bug]           Make the "autosign" system test more portable.
+                        [RT #20997]
+
+2909.   [bug]           named-checkconf -p could die if "update-policy local;"
+                        was specified in named.conf. [RT #21416]
+
+2907.   [bug]           The export version of libdns had undefined references.
+                        [RT #21444]
+
+2906.   [bug]           Address RFC 5011 implementation issues. [RT #20903]
+
+2903.   [bug]           managed-keys-directory missing from namedconf.c.
+                        [RT #21370]
+
+2897.   [bug]           NSEC3 chains could be left behind when transitioning
+                        to insecure. [RT #21040]
+
+2896.   [bug]           "rndc sign" failed to properly update the zone
+                        when adding a DNSKEY for publication only. [RT #21045]
+
+2893.   [bug]           Improve managed keys support.  New named.conf option
+                        managed-keys-directory. [RT #20924]
+
+2892.   [bug]           Handle REVOKED keys better. [RT #20961]
+
+2887.   [bug]           Report the keytag times in UTC in the .key file,
+                        local time is presented as a comment within the
+                        comment.  [RT #21223]
+
+2886.   [bug]           ctime() is not thread safe. [RT #21223]
+
+2880.   [cleanup]       Make the output of dnssec-keygen and dnssec-revoke
+                        consistent. [RT #21078]
+
+2873.   [bug]           Cancelling a dynamic update via the dns/client module
+                        could trigger an assertion failure. [RT #21133]
+
+2872.   [bug]           Modify dns/client.c:dns_client_createx() to only
+                        require one of IPv4 or IPv6 rather than both.
+                        [RT #21122]
+
+2871.   [bug]           Type mismatch in mem_api.c between the definition and
+                        the header file, causing build failure with
+                        --enable-exportlib. [RT #21138]
+
+2861.   [doc]           dnssec-settime man pages didn't correctly document the
+                        inactivation time. [RT #21039]
+
+2860.   [bug]           named-checkconf's usage was out of date. [RT #21039]
+
+2848.   [doc]           Moved README.dnssec, README.libdns, README.pkcs11 and
+                        README.rfc5011 into the ARM. [RT #20899]
+
+2847.   [cleanup]       Corrected usage message in dnssec-settime. [RT #20921]
+
+2845.   [bug]           RFC 5011 client could crash on shutdown. [RT #20903]
+
+2841.   [bug]           Change 2836 was not complete. [RT #20883]
+
+2839.   [bug]           A KSK revoked by named could not be deleted.
+                        [RT #20881]
+
+2836.   [bug]           Keys that were scheduled to become active could
+                        be delayed. [RT #20874]
+
+2835.   [bug]           Key inactivity dates were inadvertently stored in
+                        the private key file with the outdated tag
+                        "Unpublish" rather than "Inactive".  This has been
+                        fixed; however, any existing keys that had Inactive
+                        dates set will now need to have them reset, using
+                        'dnssec-settime -I'. [RT #20868]
+
+2833.   [cleanup]       Fix usage messages in dnssec-keygen and dnssec-settime.
+                        [RT #20851]
+
+2832.   [bug]           Modify "struct stat" in lib/export/samples/nsprobe.c
+                        to avoid redefinition in some OSs [RT 20831]
+
+2824.   [bug]           "rndc sign" was not being run by the correct task.
+                        [RT #20759]
+
+2821.   [doc]           Add note that named-checkconf doesn't automatically
+                        read rndc.key and bind.keys [RT #20758]
+
+2816.   [bug]           previous_closest_nsec() could fail to return
+                        data for NSEC3 nodes [RT #29730]
+
+2811.   [cleanup]       Add "rndc sign" to list of commands in rndc usage
+                        output. [RT #20733]
+
+2809.   [cleanup]       Restored accidentally-deleted text in usage output
+                        in dnssec-settime and dnssec-revoke [RT #20739]
+
+2808.   [bug]           Remove the attempt to install atomic.h from lib/isc.
+                        atomic.h is correctly installed by the architecture
+                        specific subdirectories.  [RT #20722]
+
+2807.   [bug]           Fixed a possible ASSERT when reconfiguring zone
+                        keys. [RT #20720]
+
+2806.   [bug]           "rdnc sign" could delay re-signing the DNSKEY
+                        when it had changed. [RT #20703]
+
+2805.   [bug]           Fixed namespace problems encountered when building
+                        external programs using non-exported BIND9 libraries
+                        (i.e., built without --enable-exportlib). [RT #20679]
+
+2804.   [bug]           Send notifies when a zone is signed with "rndc sign"
+                        or as a result of a scheduled key change. [RT #20700]
+
+2803.   [port]          win32: Install named-journalprint, nsec3hash, arpaname
+                        and genrandom under windows. [RT #20670]
+
+2802.   [cleanup]       Rename journalprint to named-journalprint. [RT #20670]
+
+2799.   [cleanup]       Changed the "secure-to-insecure" option to
+                        "dnssec-secure-to-insecure", and "dnskey-ksk-only"
+                        to "dnssec-dnskey-kskonly", for clarity. [RT #20586]
+
+2798.   [bug]           Addressed bugs in managed-keys initialization
+                        and rollover. [RT #20683]
+
+2796.	[bug]		Missing dns_rdataset_disassociate() call in
+			dns_nsec3_delnsec3sx(). [RT #20681]
+
+2795.	[cleanup]	Add text to differentiate "update with no effect"
+			log messages. [RT #18889]
+
+2794.	[bug]		Install <isc/namespace.h>.  [RT #20677]
+
+2791.	[bug]		The installation of isc-config.sh was broken.
+			[RT #20667]
+
+2788.	[bug]		dnssec-signzone could sign with keys that were
+			not requested [RT #20625]
+
+2787.   [bug]           Spurious log message when zone keys were
+                        dynamically reconfigured. [RT #20659]
+
+2785.	[bug]		Revoked keys could fail to self-sign [RT #20652]
+
+2781.	[bug]		Inactive keys could be used for signing. [RT #20649]
+
+2780.	[bug]		dnssec-keygen -A none didn't properly unset the
+			activation date in all cases. [RT #20648]
+
+2779.	[bug]		Dynamic key revokation could fail. [RT #20644]
+
+2778.	[bug]		dnssec-signzone could fail when a key was revoked
+			without deleting the unrevoked version. [RT #20638]
+
+2763.	[bug]		"rndc sign" didn't create an NSEC chain. [RT #20591]
+
+2761.	[cleanup]	Enable internal symbol table for backtrace only for
+			systems that are known to work.  Currently, BSD
+			variants, Linux and Solaris are supported. [RT# 20202]
+
+2775.	[bug]		Accept RSASHA256 and RSASHA512 as NSEC3 compatible
+			in dnssec-keyfromlabel. [RT #20643]
+
+2773.	[bug]		In autosigned zones, the SOA could be signed
+			with the KSK. [RT #20628]
+
+2771.	[bug]		dnssec-signzone: DNSKEY records could be
+			corrupted when importing from key files [RT #20624]
+
+2770.	[cleanup]	Add log messages to resolver.c to indicate events
+			causing FORMERR responses. [RT #20526]
+
+2769.   [cleanup]       Change #2742 was incomplete. [RT #19589]
+
+2768.	[bug]		dnssec-signzone: -S no longer implies -g [RT #20568]
+
+2767.	[bug]		named could crash on startup if a zone was
+			configured with auto-dnssec and there was no
+			key-directory. [RT #20615]
+
+2766.	[bug]		isc_socket_fdwatchpoke() should only update the
+			socketmgr state if the socket is not pending on a
+			read or write.  [RT #20603]
+
+2764.   [bug]           "rndc-confgen -a" could trigger a REQUIRE. [RT #20610]
+
+2756.   [bug]           Fixed corrupt logfile message in update.c. [RT# 20597]
+
+2753.   [bug]           Removed an unnecessary warning that could appear when
+                        building an NSEC chain. [RT #20589]
+
+2776.   [bug]           Change #2762 was not correct. [RT #20647]
+
+2762.   [bug]           DLV validation failed with a local slave DLV zone.
+                        [RT #20577]
+
+2752.   [bug]           Locking violation. [RT #20587]
+
+2751.   [bug]           Fixed a memory leak in dnssec-keyfromlabel. [RT #20588]
+
+2746.	[port]		hpux: address signed/unsigned expansion mismatch of
+			dns_rbtnode_t.nsec. [RT #20542]
+
+2745.   [bug]           configure script didn't probe the return type of
+                        gai_strerror(3) correctly. [RT #20573]
+
+2774.   [bug]           Existing cache DB wasn't being reused after
+                        reconfiguration. [RT #20629]
+
+2742.   [cleanup]       Clarify some DNSSEC-related log messages in
+                        validator.c. [RT #19589]
+
+2739.	[cleanup]	Clean up API for initializing and clearing trust
+			anchors for a view. [RT #20211]
+
+2735.	[bug]		dnssec-signzone could fail to read keys
+			that were specified on the command line with
+			full paths, but weren't in the current
+			directory. [RT #20421]
+
+2734.	[port]		cygwin: arpaname did not compile. [RT #20473]
+
+2733.	[cleanup]	Clean up coding style in pkcs11-* tools. [RT #20355]
+
+2728.	[bug]		dssec-keygen, dnssec-keyfromlabel and
+			dnssec-signzone now warn immediately if asked to
+			write into a nonexistent directory. [RT #20278]
+
+2725.	[doc]		Added information about the file "managed-keys.bind"
+			to the ARM. [RT #20235]
+
+2724.   [bug]           Updates to a existing node in secure zone using NSEC
+                        were failing. [RT #20448]
+
+2720.	[bug]		RFC 5011 trust anchor updates could trigger an
+			assert if the DNSKEY record was unsigned. [RT #20406]
+
+2717.	[bug]		named failed to update the NSEC/NSEC3 record when
+			the last private type record was removed as a result
+			of completing the signing the zone with a key.
+			[RT #20399]
+
+2711.	[port]		win32: Add the bin/pkcs11 tools into the full
+			build. [RT #20372]
+
+2694.	[bug]		Reduce default NSEC3 iterations from 100 to 10.
+			[RT #19970]
+
+2693.	[port]		Add some noreturn attributes. [RT #20257]
+
+2687.	[bug]		Fixed dnssec-signzone -S handling of revoked keys.
+			Also, added warnings when revoking a ZSK, as this is
+			not defined by protocol (but is legal).  [RT #19943]
+
+2685.	[contrib]	Update contrib/zkt to version 0.99c. [RT #20054]
+
+2684.	[cleanup]	dig: formalize +ad and +cd as synonyms for
+			+adflag and +cdflag.  [RT #19305]
+
+2682.	[bug]		"configure --enable-symtable=all" failed to
+			build. [RT #20282]
+
+2676.	[bug]		--with-export-installdir should have been
+			--with-export-includedir. [RT #20252]
+
+2675.	[bug]		dnssec-signzone could crash if the key directory
+			did not exist. [RT #20232]
+
+2674.	[bug]		"dnssec-lookaside auto;" crashed if named was built
+			without openssl. [RT #20231]
+
+2673.   [bug]           The managed-keys.bind zone file could fail to
+                        load due to a spurious result from sync_keyzone()
+                        [RT #20045]
+
+2671.	[bug]		Add support for PKCS#11 providers not returning
+			the public exponent in RSA private keys
+			(OpenCryptoki for instance) in
+			dnssec-keyfromlabel. [RT #19294]
+
+2664.	[bug]		create_keydata() and minimal_update() in zone.c
+			didn't properly check return values for some
+			functions.  [RT #19956]
+
+2658.	[bug]		dnssec-settime and dnssec-revoke didn't process
+			key file paths correctly. [RT #20078]
+
+2657.	[cleanup]	Lower "journal file <path> does not exist, creating it"
+			log level to debug 1. [RT #20058]
+
+2655.   [doc]           Document that key-directory does not affect
+                        bind.keys, rndc.key or session.key.  [RT #20155]
+
+2654.   [bug]           Improve error reporting on duplicated names for
+                        deny-answer-xxx. [RT #20164]
+
+2651.   [bug]           Dates could print incorrectly in K*.key files on
+                        64-bit systems. [RT #20076]
+
+2650.   [bug]           Assertion failure in dnssec-signzone when trying
+                        to read keyset-* files. [RT #20075]
+
+2644.   [bug]           Change #2628 caused a regression on some systems;
+                        named was unable to write the PID file and would
+                        fail on startup. [RT #20001]
+
+2641.   [bug]           Fixed an error in parsing update-policy syntax,
+                        added a regression test to check it. [RT #20007]
+
+2638.	[bug]		Install arpaname. [RT #19957]
+
+2634.	[port]		win32: Add support for libxml2, enable
+			statschannel. [RT #19773]
+
+2631.   [bug]           Handle "//", "/./" and "/../" in mkdirpath().
+                        [RT #19926 ]
+
+2629.   [port]          Check for seteuid()/setegid(), use setresuid()/
+                        setresgid() if not present. [RT #19932]
+
+2628.   [port]          linux: Allow /var/run/named/named.pid to be opened
+                        at startup with reduced capabilities in operation.
+                        [RT #19884]
+
+2627.   [bug]           Named aborted if the same key was included in
+                        trusted-keys more than once. [RT #19918]
+
+2626.   [bug]           Multiple trusted-keys could trigger an assertion
+                        failure. [RT #19914]
+
+2622.   [bug]           Printing of named.conf grammar was broken. [RT #19919]
+
+2600.   [doc]           ARM: miscellaneous reformatting for different
+                        page widths. [RT #19574]
+
+2566.	[cleanup]	Clarify logged message when an insecure DNSSEC
+			response arrives from a zone thought to be secure:
+			"insecurity proof failed" instead of "not
+			insecure". [RT #19400]
+
+2537.   [func]          Added more statistics counters including those on socket
+                        I/O events and query RTT histograms. [RT #18802]
+
+2525.   [func]          New logging category "query-errors" to provide detailed
+                        internal information about query failures, especially
+                        about server failures. [RT #19027]
+

FAQ

@@ -1,5 +1,8 @@
-Copyright ? 2000-2010, 2013-2016 Internet Systems Consortium, Inc.
-("ISC")
+Frequently Asked Questions about BIND 9
+
+Copyright © 2004-2010 Internet Systems Consortium, Inc. ("ISC")
+
+Copyright © 2000-2003 Internet Software Consortium.
 
 -----------------------------------------------------------------------
 
@@ -25,8 +28,8 @@ A: Short Answer: No.
    What addresses to listen on? For a laptop on the move a lot you may
    only want to listen on the loop back interfaces.
 
-   To whom do you offer recursive service? Is there a firewall to
-   consider? If so, is it stateless or stateful? Are you directly on the
+   Who do you offer recursive service to? Is there are firewall to
+   consider? If so is it stateless or stateful. Are you directly on the
    Internet? Are you on a private network? Are you on a NAT'd network? The
    answers to all these questions change how you configure even a caching
    name server.
@@ -90,7 +93,7 @@ Q: I'm trying to use TSIG to authenticate dynamic updates or zone
    rejecting the TSIG. Why?
 
 A: This may be a clock skew problem. Check that the the clocks on the
-   client and server are properly synchronized (e.g., using ntp).
+   client and server are properly synchronised (e.g., using ntp).
 
 Q: I see a log message like the following. Why?
 
@@ -101,8 +104,8 @@ A: You are most likely running named as a non-root user, and that user
    fixing this are to create a /var/run/named directory owned by the named
    user and set pid-file to "/var/run/named/named.pid", or set pid-file to
    "named.pid", which will put the file in the directory specified by the
-   directory option (which, in this case, must be writable by the user
-   named is running as).
+   directory option (which, in this case, must be writable by the named
+   user).
 
 Q: I can query the nameserver from the nameserver but not from other
    machines. Why?
@@ -261,7 +264,7 @@ Q: I get a error message like "zone wireless.ietf56.ietf.org/IN: loading
    master file primaries/wireless.ietf56.ietf.org: no owner".
 
 A: This error is produced when a line in the master file contains leading
-   white space (tab/space) but there is no current record owner name to
+   white space (tab/space) but the is no current record owner name to
    inherit the name from. Usually this is the result of putting white
    space before a comment, forgetting the "@" for the SOA record, or
    indenting the master file.
@@ -866,7 +869,7 @@ A: If you run Tiger(Mac OS 10.4) or later then this is all you need to do:
    Copy the key statement from /etc/rndc.conf into /etc/rndc.key, e.g.:
 
    key "rndc-key" {
-           algorithm hmac-sha256;
+           algorithm hmac-md5;
            secret "uvceheVuqf17ZwIcTydddw==";
    };
 

FAQ.xml

@@ -1,20 +1,28 @@
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+       "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" []>
 <!--
- - Copyright (C) 2000-2010, 2013-2016  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2003  Internet Software Consortium.
  -
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ - Permission to use, copy, modify, and/or distribute this software for any
+ - purpose with or without fee is hereby granted, provided that the above
+ - copyright notice and this permission notice appear in all copies.
+ -
+ - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<article xmlns="http://docbook.org/ns/docbook" version="5.0" class="faq">
+<!-- $Id: FAQ.xml,v 1.46.56.9 2010/01/20 23:47:43 tbox Exp $ -->
 
+<article class="faq">
+  <title>Frequently Asked Questions about BIND 9</title>
   <articleinfo>
     <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
-      <year>2003</year>
       <year>2004</year>
       <year>2005</year>
       <year>2006</year>
@@ -22,17 +30,20 @@
       <year>2008</year>
       <year>2009</year>
       <year>2010</year>
-      <year>2013</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
+    <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
+      <year>2003</year>
+      <holder>Internet Software Consortium.</holder>
+    </copyright>
   </articleinfo>
-  <qandaset defaultlabel="qanda">
-
-    <qandadiv><title>Compilation and Installation Questions</title>
-
+  <qandaset defaultlabel='qanda'>
+	  
+    <qandadiv><title>Compilation and Installation Questions</title>	  
+    
     <qandaentry>
       <question>
 	<para>
@@ -48,7 +59,7 @@
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -57,7 +68,7 @@
       </question>
       <answer>
 	<para>
-	  Short Answer: No.
+	  Short Answer: No. 
 	</para>
 	<para>
 	  Long Answer: There really isn't a default configuration which fits
@@ -71,8 +82,8 @@
 	  you may only want to listen on the loop back interfaces.
 	</para>
 	<para>
-	  To whom do you offer recursive service?  Is there a firewall
-	  to consider?  If so, is it stateless or stateful?  Are you
+	  Who do you offer recursive service to?  Is there are firewall
+	  to consider?  If so is it stateless or stateful.  Are you
 	  directly on the Internet?  Are you on a private network? Are
 	  you on a NAT'd network? The answers
 	  to all these questions change how you configure even a
@@ -80,9 +91,9 @@
 	</para>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- Compilation and Installation Questions -->
-
+	    
     <qandadiv><title>Configuration and Setup Questions</title>
 
     <qandaentry>
@@ -112,7 +123,7 @@ example.com. 86400 IN SOA ns hostmaster ( 1 3600 1800 1814400 3600 )</programlis
 	</informalexample>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <!-- configuration -->
       <question>
@@ -210,7 +221,7 @@ view "chaos" chaos {
       <answer>
 	<para>
 	  This may be a clock skew problem.  Check that the the clocks
-	  on the client and server are properly synchronized (e.g.,
+	  on the client and server are properly synchronised (e.g.,
 	  using ntp).
 	</para>
       </answer>
@@ -234,11 +245,11 @@ view "chaos" chaos {
 	  "/var/run/named/named.pid", or set pid-file to "named.pid",
 	  which will put the file in the directory specified by the
 	  directory option (which, in this case, must be writable by
-	  the user named is running as).
+	  the named user).
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -253,7 +264,7 @@ view "chaos" chaos {
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -346,7 +357,7 @@ Slave 10.0.1.2:
 	</informalexample>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -379,7 +390,7 @@ named-checkzone example.com tmp</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -403,7 +414,7 @@ named-checkzone example.com tmp</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -468,7 +479,7 @@ Master 10.0.1.1:
       <answer>
 	<para>
 	  This error is produced when a line in the master file
-	  contains leading white space (tab/space) but there is no
+	  contains leading white space (tab/space) but the is no
 	  current record owner name to inherit the name from.  Usually
 	  this is the result of putting white space before a comment,
 	  forgetting the "@" for the SOA record, or indenting the master
@@ -488,7 +499,7 @@ Master 10.0.1.1:
 	  You are running chrooted (-t) and have not supplied local timezone
 	  information in the chroot area.
 	</para>
-	<simplelist type="vert">
+	<simplelist>
 	  <member>FreeBSD: /etc/localtime</member>
 	  <member>Solaris: /etc/TIMEZONE and /usr/share/lib/zoneinfo</member>
 	  <member>OSF: /etc/zoneinfo/localtime</member>
@@ -498,7 +509,7 @@ Master 10.0.1.1:
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -538,7 +549,7 @@ Master 10.0.1.1:
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -590,7 +601,7 @@ zone "example.net" {
 	</informalexample>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -681,9 +692,9 @@ server ::/0 { bogus yes; };
 </programlisting>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- Configuration and Setup Questions -->
-
+    
     <qandadiv><title>Operations Questions</title>
 
     <qandaentry>
@@ -755,7 +766,7 @@ server ::/0 { bogus yes; };
     </qandadiv> <!-- Operations Questions -->
 
     <qandadiv><title>General Questions</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -794,13 +805,14 @@ server ::/0 { bogus yes; };
 	  of sending dynamic update requests to DNS servers without
 	  being specifically configured to do so.  If the update
 	  requests are coming from a Windows 2000 machine, see
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://support.microsoft.com/support/kb/articles/q246/8/04.asp">
-  &lt;http://support.microsoft.com/support/kb/articles/q246/8/04.asp&gt;</link>
+	  <ulink
+	   url="http://support.microsoft.com/support/kb/articles/q246/8/04.asp">
+  &lt;http://support.microsoft.com/support/kb/articles/q246/8/04.asp&gt;</ulink>
 	  for information about how to turn them off.
 	</para>
       </answer>
     </qandaentry>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -835,7 +847,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -853,7 +865,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -869,7 +881,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -896,7 +908,7 @@ serial-query-rate 5; // default 20</programlisting>
       </answer>
     </qandaentry>
 
-    <qandaentry>
+    <qandaentry>	    
       <question>
 	<para>
 	  I don't get RRSIG's returned when I use "dig +dnssec".
@@ -908,7 +920,7 @@ serial-query-rate 5; // default 20</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -945,7 +957,7 @@ serial-query-rate 5; // default 20</programlisting>
 	  usage rules and are leaking queries to the Internet.  You
 	  should establish your own zones for these addresses to prevent
 	  you querying the Internet's name servers for these addresses.
-	  Please see <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://as112.net/">&lt;http://as112.net/&gt;</link>
+	  Please see <ulink url="http://as112.net/">&lt;http://as112.net/&gt;</ulink>
 	  for details of the problems you are causing and the counter
 	  measures that have had to be deployed.
 	</para>
@@ -992,7 +1004,7 @@ empty:
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1069,9 +1081,9 @@ empty:
     </qandaentry>
 
     </qandadiv> <!-- General Questions -->
-
+    
     <qandadiv><title>Operating-System Specific Questions</title>
-
+	    
     <qandadiv><title>HPUX</title>
 
     <qandaentry>
@@ -1099,9 +1111,9 @@ configure: error: need either working unistd.h or sys/select.h</programlisting>
     </qandadiv> <!-- HPUX -->
 
     <qandadiv><title>Linux</title>
-
+	    
     <qandaentry>
-      <question>
+      <question> 
 	<para>
 	  Why do I get the following errors:
 <programlisting>general: errno2result.c:109: unexpected error:
@@ -1115,7 +1127,7 @@ client: UDP client handler shutting down due to fatal receive error: unexpected
 	</para>
 	<para>
 	  See:
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2">&lt;http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2&gt;</link>
+	  <ulink url="http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2">&lt;http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2&gt;</ulink>
 	</para>
       </answer>
     </qandaentry>
@@ -1132,9 +1144,9 @@ client: UDP client handler shutting down due to fatal receive error: unexpected
 	  non-blocking is ignored.  It is reported that setting
 	  xfrm_larval_drop to 1 helps but this may have negative side effects.
 	  See:
-<link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="https://bugzilla.redhat.com/show_bug.cgi?id=427629">&lt;https://bugzilla.redhat.com/show_bug.cgi?id=427629&gt;</link>
+<ulink url="https://bugzilla.redhat.com/show_bug.cgi?id=427629">&lt;https://bugzilla.redhat.com/show_bug.cgi?id=427629&gt;</ulink>
 	  and
-<link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://lkml.org/lkml/2007/12/4/260">&lt;http://lkml.org/lkml/2007/12/4/260&gt;</link>.
+<ulink url="http://lkml.org/lkml/2007/12/4/260">&lt;http://lkml.org/lkml/2007/12/4/260&gt;</ulink>.
 	</para>
 	<para>
 	xfrm_larval_drop can be set to 1 by the following procedure:
@@ -1164,7 +1176,7 @@ echo "1" &gt; proc/sys/net/core/xfrm_larval_drop</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1183,7 +1195,7 @@ echo "1" &gt; proc/sys/net/core/xfrm_larval_drop</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1204,7 +1216,7 @@ modprobe capability</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1230,7 +1242,8 @@ modprobe capability</programlisting>
 
 	<para>
 	   Red Hat have adopted the National Security Agency's
-	   SELinux security policy (see <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://www.nsa.gov/selinux">&lt;http://www.nsa.gov/selinux&gt;</link>)
+	   SELinux security policy (see <ulink
+   url="http://www.nsa.gov/selinux">&lt;http://www.nsa.gov/selinux&gt;</ulink>)
 	   and recommendations for BIND security , which are more
 	   secure than running named in a chroot and make use of
 	   the bind-chroot environment unnecessary .
@@ -1264,7 +1277,7 @@ $ROOTDIR/var/tmp
 	  able to write or create files except in the directories
 	  above, with SELinux in Enforcing mode.
 	</para>
-
+  
 	<para>
 	  So, to allow named to update slave or DDNS zone files,
 	  it is best to locate them in $ROOTDIR/var/named/slaves,
@@ -1275,7 +1288,7 @@ zone "slave.zone." IN {
 	type slave;
 	file "slaves/slave.zone.db";
 	...
-};
+};   
 zone "ddns.zone." IN  {
 	type master;
 	allow-updates {...};
@@ -1308,13 +1321,13 @@ options {
 	  system-config-securitylevel GUI, using the 'setsebool'
 	  command, or in /etc/selinux/targeted/booleans.
 	</para>
-
+  
 	<para>
 	  You can disable SELinux protection for named entirely by
 	  setting the 'named_disable_trans=1' SELinux tunable boolean
 	  parameter.
 	</para>
-
+    
 	<para>
 	  The SELinux named policy defines these SELinux contexts for named:
 	  <informalexample>
@@ -1325,7 +1338,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+   
 	<para>
 	  If you want to retain use of the SELinux policy for named,
 	  and put named files in different locations, you can do
@@ -1343,7 +1356,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+  
 	<para>
 	  To create a custom modifiable named data location, e.g.
 	  '/var/log/named' for a log file, do:
@@ -1353,7 +1366,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+   
 	<para>
    To create a custom zone file location, e.g. /root/zones/, do:
 	  <informalexample>
@@ -1362,7 +1375,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+  
 	<para>
 	  See these man-pages for more information : selinux(8),
 	  named_selinux(8), chcon(1), setsebool(8)
@@ -1388,8 +1401,8 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
       </question>
       <answer>
 	<para>
-	  Ubuntu uses AppArmor <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://en.wikipedia.org/wiki/AppArmor">
-          &lt;http://en.wikipedia.org/wiki/AppArmor&gt;</link> in
+	  Ubuntu uses AppArmor <ulink url="http://en.wikipedia.org/wiki/AppArmor">
+          &lt;http://en.wikipedia.org/wiki/AppArmor&gt;</ulink> in
 	  addition to normal file system permissions to protect the system.
 	</para>
 	<para>
@@ -1423,11 +1436,11 @@ proc /var/named/proc proc defaults 0 0</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- Linux -->
-
+    
     <qandadiv><title>Windows</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -1448,7 +1461,7 @@ proc /var/named/proc proc defaults 0 0</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1474,11 +1487,11 @@ options {
 	</informalexample>
       </answer>
     </qandaentry>
-
+	    
     </qandadiv> <!-- Windows -->
-
+    
     <qandadiv><title>FreeBSD</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -1498,16 +1511,16 @@ rand_irqs="3 14 15"</programlisting>
 	</informalexample>
 	<para>
 	  See also
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://people.freebsd.org/~dougb/randomness.html">
-	  &lt;http://people.freebsd.org/~dougb/randomness.html&gt;</link>.
+	  <ulink url="http://people.freebsd.org/~dougb/randomness.html">
+	  &lt;http://people.freebsd.org/~dougb/randomness.html&gt;</ulink>.
 	</para>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- FreeBSD -->
-
+    
     <qandadiv><title>Solaris</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -1519,14 +1532,15 @@ rand_irqs="3 14 15"</programlisting>
 	  Sun has a blog entry describing how to do this.
 	</para>
 	<para>
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris">
+	  <ulink
+	  url="http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris">
 	 &lt;http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris&gt;
-	  </link>
+	  </ulink>
 	</para>
       </answer>
     </qandaentry>
-
-    </qandadiv> <!-- Solaris -->
+    
+    </qandadiv>
 
     <qandadiv><title>Apple Mac OS X</title>
 
@@ -1542,7 +1556,7 @@ rand_irqs="3 14 15"</programlisting>
 	</para>
 	<informalexample>
 	  <programlisting>
-% sudo rndc-confgen  &gt; /etc/rndc.conf</programlisting>
+% sudo rndc-confgen  > /etc/rndc.conf</programlisting>
 	</informalexample>
 	<para>
 	  Copy the key statement from /etc/rndc.conf into /etc/rndc.key, e.g.:
@@ -1550,7 +1564,7 @@ rand_irqs="3 14 15"</programlisting>
 	<informalexample>
 	  <programlisting>
 key "rndc-key" {
-	algorithm hmac-sha256;
+	algorithm hmac-md5;
 	secret "uvceheVuqf17ZwIcTydddw==";
 };</programlisting>
 	</informalexample>
@@ -1590,8 +1604,8 @@ key "rndc-key" {
       </answer>
     </qandaentry>
 
-    </qandadiv> <!-- Apple Mac OS X -->
-
+    </qandadiv>
+    
     </qandadiv> <!-- Operating-System Specific Questions -->
 
   </qandaset>

HISTORY

@@ -1,540 +0,0 @@
-Summary of functional enhancements from prior major releases of BIND 9:
-
-BIND 9.10.0
-
-	BIND 9.10.0 includes a number of changes from BIND 9.9 and earlier
-	releases.  New features include:
-
-	 - DNS Response-rate limiting (DNS RRL), which blunts the
-	   impact of reflection and amplification attacks, is always
-	   compiled in and no longer requires a compile-time option
-	   to enable it.
-	 - An experimental "Source Identity Token" (SIT) EDNS option
-	   is now available.  Similar to DNS Cookies as invented by
-	   Donald Eastlake 3rd, these are designed to enable clients
-	   to detect off-path spoofed responses, and to enable servers
-	   to detect spoofed-source queries.  Servers can be configured
-	   to send smaller responses to clients that have not identified
-	   themselves using a SIT option, reducing the effectiveness of
-	   amplification attacks.  RRL processing has also been updated;
-	   clients proven to be legitimate via SIT are not subject to
-	   rate limiting.  Use "configure --enable-sit" to enable this
-	   feature in BIND.
-	 - A new zone file format, "map", stores zone data in a
-	   format that can be mapped directly into memory, allowing
-	   significantly faster zone loading.
-	 - "delv" (domain entity lookup and validation) is a new tool
-	   with dig-like semantics for looking up DNS data and performing
-	   internal DNSSEC validation.  This allows easy validation in
-	   environments where the resolver may not be trustworthy, and
-	   assists with troubleshooting of DNSSEC problems. (NOTE:
-	   In previous development releases of BIND 9.10, this utility
-	   was called "delve". The spelling has been changed to avoid
-	   confusion with the "delve" utility included with the Xapian
-	   search engine.)
-	 - Improved EDNS(0) processing for better resolver performance
-	   and reliability over slow or lossy connections.
-	 - A new "configure --with-tuning=large" option tunes certain
-	   compiled-in constants and default settings to values better
-	   suited to large servers with abundant memory.  This can
-	   improve performance on such servers, but will consume more
-	   memory and may degrade performance on smaller systems.
-	 - Substantial improvement in response-policy zone (RPZ)
-	   performance.  Up to 32 response-policy zones can be
-	   configured with minimal performance loss.
-	 - To improve recursive resolver performance, cache records
-	   which are still being requested by clients can now be
-	   automatically refreshed from the authoritative server
-	   before they expire, reducing or eliminating the time
-	   window in which no answer is available in the cache.
-	 - New "rpz-client-ip" triggers and drop policies allowing
-	   response policies based on the IP address of the client.
-	 - ACLs can now be specified based on geographic location
-	   using the MaxMind GeoIP databases.  Use "configure
-	   --with-geoip" to enable.
-	 - Zone data can now be shared between views, allowing
-	   multiple views to serve the same zones authoritatively
-	   without storing multiple copies in memory.
-	 - New XML schema (version 3) for the statistics channel
-	   includes many new statistics and uses a flattened XML tree
-	   for faster parsing. The older schema is now deprecated.
-	 - A new stylesheet, based on the Google Charts API, displays
-	   XML statistics in charts and graphs on javascript-enabled
-	   browsers.
-	 - The statistics channel can now provide data in JSON
-	   format as well as XML.
-	 - New stats counters track TCP and UDP queries received
-	   per zone, and EDNS options received in total.
-	 - The internal and export versions of the BIND libraries
-	   (libisc, libdns, etc) have been unified so that external
-	   library clients can use the same libraries as BIND itself.
-	 - A new compile-time option, "configure --enable-native-pkcs11",
-	   allows BIND 9 cryptography functions to use the PKCS#11 API
-	   natively, so that BIND can drive a cryptographic hardware
-	   service module (HSM) directly instead of using a modified
-	   OpenSSL as an intermediary. (Note: This feature requires an
-	   HSM to have a full implementation of the PKCS#11 API; many
-	   current HSMs only have partial implementations. The new
-	   "pkcs11-tokens" command can be used to check API completeness.
-	   Native PKCS#11 is known to work with the Thales nShield HSM
-	   and with SoftHSM version 2 from the Open DNSSEC project.)
-	 - The new "max-zone-ttl" option enforces maximum TTLs for
-	   zones. This can simplify the process of rolling DNSSEC keys
-	   by guaranteeing that cached signatures will have expired
-	   within the specified amount of time.
-	 - "dig +subnet" sends an EDNS CLIENT-SUBNET option when
-	   querying.
-	 - "dig +expire" sends an EDNS EXPIRE option when querying.
-	   When this option is sent with an SOA query to a server
-	   that supports it, it will report the expiry time of
-	   a slave zone.
-	 - New "dnssec-coverage" tool to check DNSSEC key coverage
-	   for a zone and report if a lapse in signing coverage has
-	   been inadvertently scheduled.
-	 - Signing algorithm flexibility and other improvements
-	   for the "rndc" control channel.
-	 - "named-checkzone" and "named-compilezone" can now read
-	   journal files, allowing them to process dynamic zones.
-	 - Multiple DLZ databases can now be configured.  Individual
-	   zones can be configured to be served from a specific DLZ
-	   database.  DLZ databases now serve zones of type "master"
-	   and "redirect".
-	 - "rndc zonestatus" reports information about a specified zone.
-	 - "named" now listens on IPv6 as well as IPv4 interfaces
-	   by default.
-	 - "named" now preserves the capitalization of names
-	   when responding to queries: for instance, a query for
-	   "example.com" may be answered with "example.COM" if the
-	   name was configured that way in the zone file.  Some
-	   clients have a bug causing them to depend on the older
-	   behavior, in which the case of the answer always matched
-	   the case of the query, rather than the case of the name
-	   configured in the DNS.  Such clients can now be specified
-	   in the new "no-case-compress" ACL; this will restore the
-	   older behavior of "named" for those clients only.
-	 - new "dnssec-importkey" command allows the use of offline
-	   DNSSEC keys with automatic DNSKEY management.
-	 - New "named-rrchecker" tool to verify the syntactic
-	   correctness of individual resource records.
-	 - When re-signing a zone, the new "dnssec-signzone -Q" option
-	   drops signatures from keys that are still published but are
-	   no longer active.
-	 - "named-checkconf -px" will print the contents of configuration
-	   files with the shared secrets obscured, making it easier to
-	   share configuration (e.g. when submitting a bug report)
-	   without revealing private information.
-	 - "rndc scan" causes named to re-scan network interfaces for
-	   changes in local addresses.
-	 - On operating systems with support for routing sockets,
-	   network interfaces are re-scanned automatically whenever
-	   they change.
-	 - "tsig-keygen" is now available as an alternate command
-	   name to use for "ddns-confgen".
-
-BIND 9.9.0
-
-	BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
-	releases.  New features include:
-
-	- Inline signing, allowing automatic DNSSEC signing of
-	  master zones without modification of the zonefile, or
-	  "bump in the wire" signing in slaves.
-	- NXDOMAIN redirection.
-	- New 'rndc flushtree' command clears all data under a given
-	  name from the DNS cache.
-	- New 'rndc sync' command dumps pending changes in a dynamic
-	  zone to disk without a freeze/thaw cycle.
-	- New 'rndc signing' command displays or clears signing status
-	  records in 'auto-dnssec' zones.
-	- NSEC3 parameters for 'auto-dnssec' zones can now be set prior
-	  to signing, eliminating the need to initially sign with NSEC.
-	- Startup time improvements on large authoritative servers.
-	- Slave zones are now saved in raw format by default.
-	- Several improvements to response policy zones (RPZ).
-	- Improved hardware scalability by using multiple threads
-	  to listen for queries and using finer-grained client locking
-	- The 'also-notify' option now takes the same syntax as
-	  'masters', so it can used named masterlists and TSIG keys.
-	- 'dnssec-signzone -D' writes an output file containing only DNSSEC
-	  data, which can be included by the primary zone file.
-	- 'dnssec-signzone -R' forces removal of signatures that are
-	  not expired but were created by a key which no longer exists.
-	- 'dnssec-signzone -X' allows a separate expiration date to
-	  be specified for DNSKEY signatures from other signatures.
-	- New '-L' option to dnssec-keygen, dnssec-settime, and
-	  dnssec-keyfromlabel sets the default TTL for the key.
-	- dnssec-dsfromkey now supports reading from standard input,
-	  to make it easier to convert DNSKEY to DS.
-	- RFC 1918 reverse zones have been added to the empty-zones
-	  table per RFC 6303.
-	- Dynamic updates can now optionally set the zone's SOA serial
-	  number to the current UNIX time.
-	- DLZ modules can now retrieve the source IP address of
-	  the querying client.
-	- 'request-ixfr' option can now be set at the per-zone level.
-	- 'dig +rrcomments' turns on comments about DNSKEY records,
-	  indicating their key ID, algorithm and function
-	- Simplified nsupdate syntax and added readline support
-
-BIND 9.8.0
-
-        BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
-        releases.  New features include:
-
-        - Built-in trust anchor for the root zone, which can be
-          switched on via "dnssec-validation auto;"
-        - Support for DNS64.
-        - Support for response policy zones (RPZ).
-        - Support for writable DLZ zones.
-        - Improved ease of configuration of GSS/TSIG for
-          interoperability with Active Directory
-        - Support for GOST signing algorithm for DNSSEC.
-        - Removed RTT Banding from server selection algorithm.
-        - New "static-stub" zone type.
-        - Allow configuration of resolver timeouts via
-          "resolver-query-timeout" option.
-        - The DLZ "dlopen" driver is now built by default.
-        - Added a new include file with function typedefs
-          for the DLZ "dlopen" driver.
-        - Made "--with-gssapi" default.
-        - More verbose error reporting from DLZ LDAP.
-
-BIND 9.7.0
-
-	BIND 9.7.0 includes a number of changes from BIND 9.6 and earlier
-	releases.  Most are intended to simplify DNSSEC configuration.
-	New features include:
-
-	- Fully automatic signing of zones by "named".
-	- Simplified configuration of DNSSEC Lookaside Validation (DLV).
-	- Simplified configuration of Dynamic DNS, using the "ddns-confgen"
-	  command line tool or the "local" update-policy option.  (As a side
-	  effect, this also makes it easier to configure automatic zone
-	  re-signing.)
-	- New named option "attach-cache" that allows multiple views to
-	  share a single cache.
-	- DNS rebinding attack prevention.
-	- New default values for dnssec-keygen parameters.
-	- Support for RFC 5011 automated trust anchor maintenance
-	- Smart signing: simplified tools for zone signing and key
-	  maintenance.
-	- The "statistics-channels" option is now available on Windows.
-	- A new DNSSEC-aware libdns API for use by non-BIND9 applications
-	- On some platforms, named and other binaries can now print out
-	  a stack backtrace on assertion failure, to aid in debugging.
-	- A "tools only" installation mode on Windows, which only installs
-	  dig, host, nslookup and nsupdate.
-	- Improved PKCS#11 support, including Keyper support and explicit
-	  OpenSSL engine selection.
-
-BIND 9.6.0
-
-        Full NSEC3 support
-
-        Automatic zone re-signing
-
-	New update-policy methods tcp-self and 6to4-self
-
-        The BIND 8 resolver library, libbind, has been removed from the
-        BIND 9 distribution and is now available as a separate download.
-
-	Change the default pid file location from /var/run to
-	/var/run/{named,lwresd} for improved chroot/setuid support.
-
-BIND 9.5.0
-
-	GSS-TSIG support (RFC 3645).
-
-	DHCID support.
-
-	Experimental http server and statistics support for named via xml.
-
-	More detailed statistics counters including those supported in BIND 8.
-
-	Faster ACL processing.
-
-	Use Doxygen to generate internal documentation.
-
-        Efficient LRU cache-cleaning mechanism.
-
-        NSID support.
-
-BIND 9.4.0
-
-	Implemented "additional section caching (or acache)", an
-	internal cache framework for additional section content to
-	improve response performance.  Several configuration options
-	were provided to control the behavior.
-
-	New notify type 'master-only'.  Enable notify for master
-	zones only.
-
-	Accept 'notify-source' style syntax for query-source.
-
-	rndc now allows addresses to be set in the server clauses.
-
-	New option "allow-query-cache".  This lets "allow-query"
-	be used to specify the default zone access level rather
-	than having to have every zone override the global value.
-	"allow-query-cache" can be set at both the options and view
-	levels.  If "allow-query-cache" is not set then "allow-recursion"
-	is used if set, otherwise "allow-query" is used if set
-	unless "recursion no;" is set in which case "none;" is used,
-	otherwise the default (localhost; localnets;) is used.
-
-	rndc: the source address can now be specified.
-
-	ixfr-from-differences now takes master and slave in addition
-	to yes and no at the options and view levels.
-
-	Allow the journal's name to be changed via named.conf.
-
-	'rndc notify zone [class [view]]' resend the NOTIFY messages
-	for the specified zone.
-
-	'dig +trace' now randomly selects the next servers to try.
-	Report if there is a bad delegation.
-
-	Improve check-names error messages.
-
-	Make public the function to read a key file, dst_key_read_public().
-
-	dig now returns the byte count for axfr/ixfr.
-			
-	allow-update is now settable at the options / view level.
-
-	named-checkconf now checks the logging configuration.
-
-	host now can turn on memory debugging flags with '-m'.
-
-	Don't send notify messages to self.
-
-	Perform sanity checks on NS records which refer to 'in zone' names.
-
-	New zone option "notify-delay".  Specify a minimum delay
-	between sets of NOTIFY messages.
-
-	Extend adjusting TTL warning messages.
-
-	Named and named-checkzone can now both check for non-terminal
-	wildcard records.
-
-	"rndc freeze/thaw" now freezes/thaws all zones.
-
-	named-checkconf now check acls to verify that they only
-	refer to existing acls.
-
-	The server syntax has been extended to support a range of
-	servers.
-
-	Report differences between hints and real NS rrset and
-	associated address records.
-
-	Preserve the case of domain names in rdata during zone
-	transfers.
-
-	Restructured the data locking framework using architecture
-	dependent atomic operations (when available), improving
-	response performance on multi-processor machines significantly.
-	x86, x86_64, alpha, powerpc, and mips are currently supported.
-
-	UNIX domain controls are now supported.
-
-	Add support for additional zone file formats for improving
-	loading performance.  The masterfile-format option in
-	named.conf can be used to specify a non-default format.  A
-	separate command named-compilezone was provided to generate
-	zone files in the new format.  Additionally, the -I and -O
-	options for dnssec-signzone specify the input and output
-	formats.
-
-	dnssec-signzone can now randomize signature end times
-	(dnssec-signzone -j jitter).
-
-	Add support for CH A record.
-
-	Add additional zone data constancy checks.  named-checkzone
-	has extended checking of NS, MX and SRV record and the hosts
-	they reference.  named has extended post zone load checks.
-	New zone options: check-mx and integrity-check.
-
-
-	edns-udp-size can now be overridden on a per server basis.
-
-	dig can now specify the EDNS version when making a query.
-
-	Added framework for handling multiple EDNS versions.
-
-	Additional memory debugging support to track size and mctx
-	arguments.
-
-	Detect duplicates of UDP queries we are recursing on and
-	drop them.  New stats category "duplicates".
-
-	"USE INTERNAL MALLOC" is now runtime selectable.
-
-	The lame cache is now done on a <qname,qclass,qtype> basis
-	as some servers only appear to be lame for certain query
-	types.
-
-	Limit the number of recursive clients that can be waiting
-	for a single query (<qname,qtype,qclass>) to resolve.  New
-	options clients-per-query and max-clients-per-query.
-
-	dig: report the number of extra bytes still left in the
-	packet after processing all the records.
-
-	Support for IPSECKEY rdata type.
-
-	Raise the UDP recieve buffer size to 32k if it is less than 32k.
-
-	x86 and x86_64 now have seperate atomic locking implementations.
-
-	named-checkconf now validates update-policy entries.
-
-	Attempt to make the amount of work performed in a iteration
-	self tuning.  The covers nodes clean from the cache per
-	iteration, nodes written to disk when rewriting a master
-	file and nodes destroyed per iteration when destroying a
-	zone or a cache.
-
-	ISC string copy API.
-
-	Automatic empty zone creation for D.F.IP6.ARPA and friends.
-	Note: RFC 1918 zones are not yet covered by this but are
-	likely to be in a future release.
-
-	New options: empty-server, empty-contact, empty-zones-enable
-	and disable-empty-zone.
-
-	dig now has a '-q queryname' and '+showsearch' options.
-
-	host/nslookup now continue (default)/fail on SERVFAIL.
-
-	dig now warns if 'RA' is not set in the answer when 'RD'
-	was set in the query.  host/nslookup skip servers that fail
-	to set 'RA' when 'RD' is set unless a server is explicitly
-	set.
-
-	Integrate contibuted DLZ code into named.
-
-	Integrate contibuted IDN code from JPNIC.
-
-	libbind: corresponds to that from BIND 8.4.7.
-
-BIND 9.3.0
-
-	DNSSEC is now DS based (RFC 3658).
-	See also RFC 3845, doc/draft/draft-ietf-dnsext-dnssec-*.
-
-	DNSSEC lookaside validation.
-
-	check-names is now implemented.
-	rrset-order in more complete.
-
-	IPv4/IPv6 transition support, dual-stack-servers.
-
-	IXFR deltas can now be generated when loading master files,
-	ixfr-from-differences.
-
-	It is now possible to specify the size of a journal, max-journal-size.
-
-	It is now possible to define a named set of master servers to be
-	used in masters clause, masters.
-
-	The advertised EDNS UDP size can now be set, edns-udp-size.
-
-	allow-v6-synthesis has been obsoleted.
-
-	NOTE:
-	* Zones containing MD and MF will now be rejected.
-	* dig, nslookup name. now report "Not Implemented" as
-	  NOTIMP rather than NOTIMPL.  This will have impact on scripts
-	  that are looking for NOTIMPL.
-
-	libbind: corresponds to that from BIND 8.4.5.
-
-BIND 9.2.0
-
-	The size of the cache can now be limited using the
-        "max-cache-size" option.
-
-	The server can now automatically convert RFC1886-style recursive
-	lookup requests into RFC2874-style lookups, when enabled using the
-	new option "allow-v6-synthesis".  This allows stub resolvers that
-	support AAAA records but not A6 record chains or binary labels to
-	perform lookups in domains that make use of these IPv6 DNS
-	features.
-
-	Performance has been improved.
-
-	The man pages now use the more portable "man" macros rather than
-	the "mandoc" macros, and are installed by "make install".
-
-	The named.conf parser has been completely rewritten.  It now
-	supports "include" directives in more places such as inside "view"
-	statements, and it no longer has any reserved words.
-
-	The "rndc status" command is now implemented.
-
-	rndc can now be configured automatically.
-
-	A BIND 8 compatible stub resolver library is now included in
-	lib/bind.
-
-	OpenSSL has been removed from the distribution.  This means that to
-	use DNSSEC, OpenSSL must be installed and the --with-openssl option
-	must be supplied to configure.  This does not apply to the use of
-	TSIG, which does not require OpenSSL.
-
-	The source distribution now builds on Windows.  See
-	win32utils/readme1.txt and win32utils/win32-build.txt for details.
-
-	This distribution also includes a new lightweight stub
-	resolver library and associated resolver daemon that fully
-	support forward and reverse lookups of both IPv4 and IPv6
-	addresses.  This library is considered experimental and
-	is not a complete replacement for the BIND 8 resolver library.
-	Applications that use the BIND 8 res_* functions to perform
-	DNS lookups or dynamic updates still need to be linked against
-	the BIND 8 libraries.  For DNS lookups, they can also use the
-	new "getrrsetbyname()" API.
-
-	BIND 9.2 is capable of acting as an authoritative server
-	for DNSSEC secured zones.  This functionality is believed to
-	be stable and complete except for lacking support for
-	verifications involving wildcard records in secure zones.
-
-	When acting as a caching server, BIND 9.2 can be configured
-	to perform DNSSEC secure resolution on behalf of its clients.
-	This part of the DNSSEC implementation is still considered
-	experimental.  For detailed information about the state of the
-	DNSSEC implementation, see the file doc/misc/dnssec.
-
-	There are a few known bugs:
-
-	    On some systems, IPv6 and IPv4 sockets interact in
-	    unexpected ways.  For details, see doc/misc/ipv6.
-	    To reduce the impact of these problems, the server
-	    no longer listens for requests on IPv6 addresses
-	    by default.  If you need to accept DNS queries over
-	    IPv6, you must specify "listen-on-v6 { any; };"
-	    in the named.conf options statement.
-
-	    FreeBSD prior to 4.2 (and 4.2 if running as non-root)
-	    and OpenBSD prior to 2.8 log messages like
-	    "fcntl(8, F_SETFL, 4): Inappropriate ioctl for device".
-	    This is due to a bug in "/dev/random" and impacts the
-	    server's DNSSEC support.
-
-	    OS X 10.1.4 (Darwin 5.4), OS X 10.1.5 (Darwin 5.5) and
-	    OS X 10.2 (Darwin 6.0) reports errors like
-	    "fcntl(3, F_SETFL, 4): Operation not supported by device".
-	    This is due to a bug in "/dev/random" and impacts the
-	    server's DNSSEC support.
-
-	    --with-libtool does not work on AIX.
-
-	A bug in some versions of the Microsoft DNS server can cause zone
-        transfers from a BIND 9 server to a W2K server to fail.  For details,
-	see the "Zone Transfers" section in doc/misc/migration.

KNOWN-DEFECTS

@@ -0,0 +1,15 @@
+dnssec-signzone was designed so that it could sign a zone partially, using
+only a subset of the DNSSEC keys needed to produce a fully-signed zone.
+This permits a zone administrator, for example, to sign a zone with one
+key on one machine, move the resulting partially-signed zone to a second
+machine, and sign it again with a second key.
+
+An unfortunate side-effect of this flexibility is that dnssec-signzone
+does not check to make sure it's signing a zone with any valid keys at
+all.  An attempt to sign a zone without any keys will appear to succeed,
+producing a "signed" zone with no signatures.  There is no warning issued
+when a zone is not signed.
+
+This will be corrected in a future release.  In the meantime, ISC
+recommends examining the output of dnssec-signzone to confirm that
+the zone is properly signed by all keys before using it.

LICENSE

@@ -1,362 +0,0 @@
-Mozilla Public License, version 2.0
-
-1. Definitions
-
-1.1. "Contributor"
-
-     means each individual or legal entity that creates, contributes to the
-     creation of, or owns Covered Software.
-
-1.2. "Contributor Version"
-
-     means the combination of the Contributions of others (if any) used by a
-     Contributor and that particular Contributor's Contribution.
-
-1.3. "Contribution"
-
-     means Covered Software of a particular Contributor.
-
-1.4. "Covered Software"
-
-     means Source Code Form to which the initial Contributor has attached the
-     notice in Exhibit A, the Executable Form of such Source Code Form, and
-     Modifications of such Source Code Form, in each case including portions
-     thereof.
-
-1.5. "Incompatible With Secondary Licenses"
-     means
-
-     a. that the initial Contributor has attached the notice described in
-        Exhibit B to the Covered Software; or
-
-     b. that the Covered Software was made available under the terms of
-        version 1.1 or earlier of the License, but not also under the terms of
-        a Secondary License.
-
-1.6. "Executable Form"
-
-     means any form of the work other than Source Code Form.
-
-1.7. "Larger Work"
-
-     means a work that combines Covered Software with other material, in a
-     separate file or files, that is not Covered Software.
-
-1.8. "License"
-
-     means this document.
-
-1.9. "Licensable"
-
-     means having the right to grant, to the maximum extent possible, whether
-     at the time of the initial grant or subsequently, any and all of the
-     rights conveyed by this License.
-
-1.10. "Modifications"
-
-     means any of the following:
-
-     a. any file in Source Code Form that results from an addition to,
-        deletion from, or modification of the contents of Covered Software; or
-
-     b. any new file in Source Code Form that contains any Covered Software.
-
-1.11. "Patent Claims" of a Contributor
-
-      means any patent claim(s), including without limitation, method,
-      process, and apparatus claims, in any patent Licensable by such
-      Contributor that would be infringed, but for the grant of the License,
-      by the making, using, selling, offering for sale, having made, import,
-      or transfer of either its Contributions or its Contributor Version.
-
-1.12. "Secondary License"
-
-      means either the GNU General Public License, Version 2.0, the GNU Lesser
-      General Public License, Version 2.1, the GNU Affero General Public
-      License, Version 3.0, or any later versions of those licenses.
-
-1.13. "Source Code Form"
-
-      means the form of the work preferred for making modifications.
-
-1.14. "You" (or "Your")
-
-      means an individual or a legal entity exercising rights under this
-      License. For legal entities, "You" includes any entity that controls, is
-      controlled by, or is under common control with You. For purposes of this
-      definition, "control" means (a) the power, direct or indirect, to cause
-      the direction or management of such entity, whether by contract or
-      otherwise, or (b) ownership of more than fifty percent (50%) of the
-      outstanding shares or beneficial ownership of such entity.
-
-
-2. License Grants and Conditions
-
-2.1. Grants
-
-     Each Contributor hereby grants You a world-wide, royalty-free,
-     non-exclusive license:
-
-     a. under intellectual property rights (other than patent or trademark)
-        Licensable by such Contributor to use, reproduce, make available,
-        modify, display, perform, distribute, and otherwise exploit its
-        Contributions, either on an unmodified basis, with Modifications, or
-        as part of a Larger Work; and
-
-     b. under Patent Claims of such Contributor to make, use, sell, offer for
-        sale, have made, import, and otherwise transfer either its
-        Contributions or its Contributor Version.
-
-2.2. Effective Date
-
-     The licenses granted in Section 2.1 with respect to any Contribution
-     become effective for each Contribution on the date the Contributor first
-     distributes such Contribution.
-
-2.3. Limitations on Grant Scope
-
-     The licenses granted in this Section 2 are the only rights granted under
-     this License. No additional rights or licenses will be implied from the
-     distribution or licensing of Covered Software under this License.
-     Notwithstanding Section 2.1(b) above, no patent license is granted by a
-     Contributor:
-
-     a. for any code that a Contributor has removed from Covered Software; or
-
-     b. for infringements caused by: (i) Your and any other third party's
-        modifications of Covered Software, or (ii) the combination of its
-        Contributions with other software (except as part of its Contributor
-        Version); or
-
-     c. under Patent Claims infringed by Covered Software in the absence of
-        its Contributions.
-
-     This License does not grant any rights in the trademarks, service marks,
-     or logos of any Contributor (except as may be necessary to comply with
-     the notice requirements in Section 3.4).
-
-2.4. Subsequent Licenses
-
-     No Contributor makes additional grants as a result of Your choice to
-     distribute the Covered Software under a subsequent version of this
-     License (see Section 10.2) or under the terms of a Secondary License (if
-     permitted under the terms of Section 3.3).
-
-2.5. Representation
-
-     Each Contributor represents that the Contributor believes its
-     Contributions are its original creation(s) or it has sufficient rights to
-     grant the rights to its Contributions conveyed by this License.
-
-2.6. Fair Use
-
-     This License is not intended to limit any rights You have under
-     applicable copyright doctrines of fair use, fair dealing, or other
-     equivalents.
-
-2.7. Conditions
-
-     Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted in
-     Section 2.1.
-
-
-3. Responsibilities
-
-3.1. Distribution of Source Form
-
-     All distribution of Covered Software in Source Code Form, including any
-     Modifications that You create or to which You contribute, must be under
-     the terms of this License. You must inform recipients that the Source
-     Code Form of the Covered Software is governed by the terms of this
-     License, and how they can obtain a copy of this License. You may not
-     attempt to alter or restrict the recipients' rights in the Source Code
-     Form.
-
-3.2. Distribution of Executable Form
-
-     If You distribute Covered Software in Executable Form then:
-
-     a. such Covered Software must also be made available in Source Code Form,
-        as described in Section 3.1, and You must inform recipients of the
-        Executable Form how they can obtain a copy of such Source Code Form by
-        reasonable means in a timely manner, at a charge no more than the cost
-        of distribution to the recipient; and
-
-     b. You may distribute such Executable Form under the terms of this
-        License, or sublicense it under different terms, provided that the
-        license for the Executable Form does not attempt to limit or alter the
-        recipients' rights in the Source Code Form under this License.
-
-3.3. Distribution of a Larger Work
-
-     You may create and distribute a Larger Work under terms of Your choice,
-     provided that You also comply with the requirements of this License for
-     the Covered Software. If the Larger Work is a combination of Covered
-     Software with a work governed by one or more Secondary Licenses, and the
-     Covered Software is not Incompatible With Secondary Licenses, this
-     License permits You to additionally distribute such Covered Software
-     under the terms of such Secondary License(s), so that the recipient of
-     the Larger Work may, at their option, further distribute the Covered
-     Software under the terms of either this License or such Secondary
-     License(s).
-
-3.4. Notices
-
-     You may not remove or alter the substance of any license notices
-     (including copyright notices, patent notices, disclaimers of warranty, or
-     limitations of liability) contained within the Source Code Form of the
-     Covered Software, except that You may alter any license notices to the
-     extent required to remedy known factual inaccuracies.
-
-3.5. Application of Additional Terms
-
-     You may choose to offer, and to charge a fee for, warranty, support,
-     indemnity or liability obligations to one or more recipients of Covered
-     Software. However, You may do so only on Your own behalf, and not on
-     behalf of any Contributor. You must make it absolutely clear that any
-     such warranty, support, indemnity, or liability obligation is offered by
-     You alone, and You hereby agree to indemnify every Contributor for any
-     liability incurred by such Contributor as a result of warranty, support,
-     indemnity or liability terms You offer. You may include additional
-     disclaimers of warranty and limitations of liability specific to any
-     jurisdiction.
-
-4. Inability to Comply Due to Statute or Regulation
-
-   If it is impossible for You to comply with any of the terms of this License
-   with respect to some or all of the Covered Software due to statute,
-   judicial order, or regulation then You must: (a) comply with the terms of
-   this License to the maximum extent possible; and (b) describe the
-   limitations and the code they affect. Such description must be placed in a
-   text file included with all distributions of the Covered Software under
-   this License. Except to the extent prohibited by statute or regulation,
-   such description must be sufficiently detailed for a recipient of ordinary
-   skill to be able to understand it.
-
-5. Termination
-
-5.1. The rights granted under this License will terminate automatically if You
-     fail to comply with any of its terms. However, if You become compliant,
-     then the rights granted under this License from a particular Contributor
-     are reinstated (a) provisionally, unless and until such Contributor
-     explicitly and finally terminates Your grants, and (b) on an ongoing
-     basis, if such Contributor fails to notify You of the non-compliance by
-     some reasonable means prior to 60 days after You have come back into
-     compliance. Moreover, Your grants from a particular Contributor are
-     reinstated on an ongoing basis if such Contributor notifies You of the
-     non-compliance by some reasonable means, this is the first time You have
-     received notice of non-compliance with this License from such
-     Contributor, and You become compliant prior to 30 days after Your receipt
-     of the notice.
-
-5.2. If You initiate litigation against any entity by asserting a patent
-     infringement claim (excluding declaratory judgment actions,
-     counter-claims, and cross-claims) alleging that a Contributor Version
-     directly or indirectly infringes any patent, then the rights granted to
-     You by any and all Contributors for the Covered Software under Section
-     2.1 of this License shall terminate.
-
-5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user
-     license agreements (excluding distributors and resellers) which have been
-     validly granted by You or Your distributors under this License prior to
-     termination shall survive termination.
-
-6. Disclaimer of Warranty
-
-   Covered Software is provided under this License on an "as is" basis,
-   without warranty of any kind, either expressed, implied, or statutory,
-   including, without limitation, warranties that the Covered Software is free
-   of defects, merchantable, fit for a particular purpose or non-infringing.
-   The entire risk as to the quality and performance of the Covered Software
-   is with You. Should any Covered Software prove defective in any respect,
-   You (not any Contributor) assume the cost of any necessary servicing,
-   repair, or correction. This disclaimer of warranty constitutes an essential
-   part of this License. No use of  any Covered Software is authorized under
-   this License except under this disclaimer.
-
-7. Limitation of Liability
-
-   Under no circumstances and under no legal theory, whether tort (including
-   negligence), contract, or otherwise, shall any Contributor, or anyone who
-   distributes Covered Software as permitted above, be liable to You for any
-   direct, indirect, special, incidental, or consequential damages of any
-   character including, without limitation, damages for lost profits, loss of
-   goodwill, work stoppage, computer failure or malfunction, or any and all
-   other commercial damages or losses, even if such party shall have been
-   informed of the possibility of such damages. This limitation of liability
-   shall not apply to liability for death or personal injury resulting from
-   such party's negligence to the extent applicable law prohibits such
-   limitation. Some jurisdictions do not allow the exclusion or limitation of
-   incidental or consequential damages, so this exclusion and limitation may
-   not apply to You.
-
-8. Litigation
-
-   Any litigation relating to this License may be brought only in the courts
-   of a jurisdiction where the defendant maintains its principal place of
-   business and such litigation shall be governed by laws of that
-   jurisdiction, without reference to its conflict-of-law provisions. Nothing
-   in this Section shall prevent a party's ability to bring cross-claims or
-   counter-claims.
-
-9. Miscellaneous
-
-   This License represents the complete agreement concerning the subject
-   matter hereof. If any provision of this License is held to be
-   unenforceable, such provision shall be reformed only to the extent
-   necessary to make it enforceable. Any law or regulation which provides that
-   the language of a contract shall be construed against the drafter shall not
-   be used to construe this License against a Contributor.
-
-
-10. Versions of the License
-
-10.1. New Versions
-
-      Mozilla Foundation is the license steward. Except as provided in Section
-      10.3, no one other than the license steward has the right to modify or
-      publish new versions of this License. Each version will be given a
-      distinguishing version number.
-
-10.2. Effect of New Versions
-
-      You may distribute the Covered Software under the terms of the version
-      of the License under which You originally received the Covered Software,
-      or under the terms of any subsequent version published by the license
-      steward.
-
-10.3. Modified Versions
-
-      If you create software not governed by this License, and you want to
-      create a new license for such software, you may create and use a
-      modified version of this License if you rename the license and remove
-      any references to the name of the license steward (except to note that
-      such modified license differs from this License).
-
-10.4. Distributing Source Code Form that is Incompatible With Secondary
-      Licenses If You choose to distribute Source Code Form that is
-      Incompatible With Secondary Licenses under the terms of this version of
-      the License, the notice described in Exhibit B of this License must be
-      attached.
-
-Exhibit A - Source Code Form License Notice
-
-      This Source Code Form is subject to the
-      terms of the Mozilla Public License, v.
-      2.0. If a copy of the MPL was not
-      distributed with this file, You can
-      obtain one at
-      http://mozilla.org/MPL/2.0/.
-
-If it is not possible or desirable to put the notice in a particular file,
-then You may include the notice in a location (such as a LICENSE file in a
-relevant directory) where a recipient would be likely to look for such a
-notice.
-
-You may add additional accurate notices of copyright ownership.
-
-Exhibit B - "Incompatible With Secondary Licenses" Notice
-
-      This Source Code Form is "Incompatible
-      With Secondary Licenses", as defined by
-      the Mozilla Public License, v. 2.0.

Makefile.in

@@ -1,35 +1,37 @@
-# Copyright (C) 1998-2002, 2004-2009, 2011-2016  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004-2009  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 1998-2002  Internet Software Consortium.
 #
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+# PERFORMANCE OF THIS SOFTWARE.
 
-# $Id: Makefile.in,v 1.62 2011/09/06 04:06:37 marka Exp $
+# $Id: Makefile.in,v 1.52.48.2 2009/02/20 23:47:23 tbox Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
-SUBDIRS =	make unit lib bin doc
+SUBDIRS =	make lib bin doc
 TARGETS =
-PREREQS =	bind.keys.h
 
 MANPAGES =	isc-config.sh.1
-
+ 
 HTMLPAGES =	isc-config.sh.html
-
+ 
 MANOBJS =	${MANPAGES} ${HTMLPAGES}
 
 @BIND9_MAKE_RULES@
 
-newrr:
-	cd lib/dns; ${MAKE} newrr
-
-bind.keys.h: ${top_srcdir}/bind.keys ${srcdir}/util/bindkeys.pl
-	${PERL} ${srcdir}/util/bindkeys.pl < ${top_srcdir}/bind.keys > $@
-
 distclean::
 	rm -f config.cache config.h config.log config.status TAGS
 	rm -f libtool isc-config.sh configure.lineno
@@ -39,7 +41,6 @@ distclean::
 # to make it.
 maintainer-clean::
 	rm -f configure
-	rm -f bind.keys.h
 
 docclean manclean maintainer-clean::
 	rm -f ${MANOBJS}
@@ -53,51 +54,21 @@ installdirs:
 
 install:: isc-config.sh installdirs
 	${INSTALL_SCRIPT} isc-config.sh ${DESTDIR}${bindir}
-	rm -f ${DESTDIR}${bindir}/bind9-config
-	@LN@ ${DESTDIR}${bindir}/isc-config.sh ${DESTDIR}${bindir}/bind9-config
-	${INSTALL_DATA} ${top_srcdir}/isc-config.sh.1 ${DESTDIR}${mandir}/man1
-	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
-	@LN@ ${DESTDIR}${mandir}/man1/isc-config.sh.1 ${DESTDIR}${mandir}/man1/bind9-config.1
-	${INSTALL_DATA} ${top_srcdir}/bind.keys ${DESTDIR}${sysconfdir}
-
-uninstall::
-	rm -f ${DESTDIR}${sysconfdir}/bind.keys
-	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
-	rm -f ${DESTDIR}${mandir}/man1/isc-config.sh.1
-	rm -f ${DESTDIR}${bindir}/bind9-config
-	rm -f ${DESTDIR}${bindir}/isc-config.sh
+	${INSTALL_DATA} ${srcdir}/isc-config.sh.1 ${DESTDIR}${mandir}/man1
 
 tags:
 	rm -f TAGS
 	find lib bin -name "*.[ch]" -print | @ETAGS@ -
 
-test check:
-	@if test -n "`${PERL} ${top_srcdir}/bin/tests/system/testsock.pl 2>&- || echo fail`"; then \
-	echo I: NOTE: The tests were not run because they require that; \
-	echo I:	the IP addresses 10.53.0.1 through 10.53.0.8 are configured; \
-	echo I:	as alias addresses on the loopback interface.  Please run; \
-	echo I:	\'bin/tests/system/ifconfig.sh up\' as root to configure; \
-	echo I:	them, then rerun the tests. Run make force-test to run the; \
-	echo I:	tests anyway.; \
-	exit 1; \
-	fi
-	${MAKE} test-force
+check: test
 
-force-test: test-force
-
-test-force:
-	status=0; \
-	(cd bin/tests && ${MAKE} ${MAKEDEFS} test) || status=1; \
-	(test -f unit/unittest.sh && $(SHELL) unit/unittest.sh) || status=1; \
-	exit $$status
+test:
+	(cd bin/tests && ${MAKE} ${MAKEDEFS} test)
 
 FAQ: FAQ.xml
 	${XSLTPROC} doc/xsl/isc-docbook-text.xsl FAQ.xml | \
 	LC_ALL=C ${W3M} -T text/html -dump -cols 72 >$@.tmp
 	mv $@.tmp $@
 
-unit::
-	sh ${top_srcdir}/unit/unittest.sh
-
 clean::
 	rm -f FAQ.tmp

NSEC3-NOTES

@@ -0,0 +1,128 @@
+
+			DNSSEC and UPDATE
+
+		Converting from insecure to secure
+
+As of BIND 9.6.0 it is possible to move a zone between being insecure
+to secure and back again.  A secure zone can be using NSEC or NSEC3.
+
+To move a zone from insecure to secure you need to configure named
+so that it can see the K* files which contain the public and private
+parts of the keys that will be used to sign the zone.  These files
+will have been generated by dnssec-keygen.  You can do this by
+placing them in the key-directory as specified in named.conf.
+
+	zone example.net {
+		type master;
+		allow-update { .... };
+		file "dynamic/example.net/example.net";
+		key-directory "dynamic/example.net";
+	};
+
+Assuming one KSK and one ZSK DNSKEY key have been generated.  Then
+this will cause the zone to be signed with the ZSK and the DNSKEY
+RRset to be signed with the KSK DNSKEY.  A NSEC chain will also be
+generated as part of the initial signing process.
+
+	% nsupdate
+	> ttl 3600
+	> update add example.net DNSKEY 256 3 7 AwEAAZn17pUF0KpbPA2c7Gz76Vb18v0teKT3EyAGfBfL8eQ8al35zz3Y I1m/SAQBxIqMfLtIwqWPdgthsu36azGQAX8=
+	> update add example.net DNSKEY 257 3 7 AwEAAd/7odU/64o2LGsifbLtQmtO8dFDtTAZXSX2+X3e/UNlq9IHq3Y0 XtC0Iuawl/qkaKVxXe2lo8Ct+dM6UehyCqk=
+	> send
+
+While the update request will complete almost immediately the zone
+will not be completely signed until named has had time to walk the
+zone and generate the NSEC and RRSIG records.  Initially the NSEC
+record at the zone apex will have the OPT bit set.  When the NSEC
+chain is complete the OPT bit will be cleared.  Additionally when
+the zone is fully signed the private type (default TYPE65534) records
+will have a non zero value for the final octet. 
+
+The private type record has 5 octets.
+	algorithm (octet 1)
+	key id in network order (octet 2 and 3)
+	removal flag (octet 4)
+	complete flag (octet 5)
+
+If you wish to go straight to a secure zone using NSEC3 you should
+also add a NSEC3PARAM record to the update request with the flags
+field set to indicate whether the NSEC3 chain will have the OPTOUT
+bit set or not.
+
+	% nsupdate
+	> ttl 3600
+	> update add example.net DNSKEY 256 3 7 AwEAAZn17pUF0KpbPA2c7Gz76Vb18v0teKT3EyAGfBfL8eQ8al35zz3Y I1m/SAQBxIqMfLtIwqWPdgthsu36azGQAX8=
+	> update add example.net DNSKEY 257 3 7 AwEAAd/7odU/64o2LGsifbLtQmtO8dFDtTAZXSX2+X3e/UNlq9IHq3Y0 XtC0Iuawl/qkaKVxXe2lo8Ct+dM6UehyCqk=
+	> update add example.net NSEC3PARAM 1 1 100 1234567890
+	> send
+
+Again the update request will complete almost immediately however the
+NSEC3PARAM record will have additional flag bits set indicating that the
+NSEC3 chain is under construction.  When the NSEC3 chain is complete the
+flags field will be set to zero. 
+
+While the initial signing and NSEC/NSEC3 chain generation is happening
+other updates are possible.
+
+		DNSKEY roll overs via UPDATE
+
+It is possible to perform key rollovers via update.  You need to
+add the K* files for the new keys so that named can find them.  You
+can then add the new DNSKEY RRs via update.  Named will then cause
+the zone to be signed with the new keys.  When the signing is
+complete the private type records will be updated so that the last
+octet is non zero.
+
+If this is for a KSK you need to inform the parent and any trust
+anchor repositories of the new KSK.
+
+You should then wait for the maximum TLL in the zone before removing the
+old DNSKEY.  If it is a KSK that is being updated you also need to wait
+for the DS RRset in the parent to be updated and its TTL to expire.
+This ensures that all clients will be able to verify at least a signature
+when you remove the old DNSKEY.
+
+The old DNSKEY can be removed via UPDATE.  Take care to specify
+the correct key.  Named will clean out any signatures generated by
+the old key after the update completes.
+
+		NSEC3PARAM rollovers via UPDATE.
+
+Add the new NSEC3PARAM record via update.  When the new NSEC3 chain
+has been generated the NSEC3PARAM flag field will be zero.  At this
+point you can remove the old NSEC3PARAM record.  The old chain will
+be removed after the update request completes.
+
+		Converting from NSEC to NSEC3
+
+To do this you just need to add a NSEC3PARAM record.  When the
+conversion is complete the NSEC chain will have been removed and
+the NSEC3PARAM record will have a zero flag field.  The NSEC3 chain
+will be generated before the NSEC chain is destroyed.
+
+		Converting from NSEC3 to NSEC
+
+To do this remove all NSEC3PARAM records with a zero flag field.  The
+NSEC chain will be generated before the NSEC3 chain is removed.
+
+		Converting from secure to insecure
+
+To do this remove all the DNSKEY records.  Any NSEC or NSEC3 chains
+will be removed as well as associated NSEC3PARAM records.  This will
+take place after the update requests completes.
+
+		Periodic re-signing.
+
+Named will periodically re-sign RRsets which have not been re-signed
+as a result of some update action.  The signature lifetimes will
+be adjusted so as to spread the re-sign load over time rather than
+all at once.
+
+		NSEC3 and OPTOUT
+
+Named only supports creating new NSEC3 chains where all the NSEC3
+records in the zone have the same OPTOUT state.  Named supports
+UPDATES to zones where the NSEC3 records in the chain have mixed
+OPTOUT state.  Named does not support changing the OPTOUT state of
+an individual NSEC3 record, the entire chain needs to be changed if
+the OPTOUT state of an individual NSEC3 needs to be changed.

README

@@ -42,168 +42,368 @@ BIND 9
 		Stichting NLnet - NLnet Foundation
 		Nominum, Inc.
 
-	For a summary of functional enhancements in previous
-	releases, see the HISTORY file.
+BIND 9.6.3
+
+	BIND 9.6.3 is a maintenance release, fixing bugs in 9.6.2.
+
+BIND 9.6.2
+
+	BIND 9.6.2 is a maintenance release, fixing bugs in 9.6.1.
+        It also introduces support for the SHA-2 DNSSEC algorithms,
+        RSASHA256 and RSASHA512.
+
+        Known issues in this release:
+
+        - A validating resolver that has been incorrectly configured with
+          an invalid trust anchor will be unable to resolve names covered
+          by that trust anchor.  In all current versions of BIND 9, such a
+          resolver will also generate significant unnecessary DNS traffic
+          while trying to validate.  The latter problem will be addressed
+          in future BIND 9 releases.  In the meantime, to avoid these
+          problems, exercise caution when configuring "trusted-keys":
+          make sure all keys are correct and current when you add them,
+          and update your configuration in a timely manner when keys
+          roll over.
+
+BIND 9.6.1
+
+	BIND 9.6.1 is a maintenance release, fixing bugs in 9.6.0.
+
+BIND 9.6.0
+
+        BIND 9.6.0 includes a number of changes from BIND 9.5 and earlier
+        releases, including:
+
+        Full NSEC3 support
+
+        Automatic zone re-signing
+
+	New update-policy methods tcp-self and 6to4-self
+
+        The BIND 8 resolver library, libbind, has been removed from the
+        BIND 9 distribution and is now available as a separate download.
+
+	Change the default pid file location from /var/run to
+	/var/run/{named,lwresd} for improved chroot/setuid support.
+
+BIND 9.5.0
+
+	BIND 9.5.0 has a number of new features over 9.4,
+	including:
+
+	GSS-TSIG support (RFC 3645).
+
+	DHCID support.
+
+	Experimental http server and statistics support for named via xml.
+
+	More detailed statistics counters including those supported in BIND 8.
+
+	Faster ACL processing.
+
+	Use Doxygen to generate internal documentation.
+
+        Efficient LRU cache-cleaning mechanism.
+
+        NSID support.
+
+BIND 9.4.0
+
+	BIND 9.4.0 has a number of new features over 9.3,
+	including:
+
+	Implemented "additional section caching (or acache)", an
+	internal cache framework for additional section content to
+	improve response performance.  Several configuration options
+	were provided to control the behavior.
+
+	New notify type 'master-only'.  Enable notify for master
+	zones only.
+
+	Accept 'notify-source' style syntax for query-source.
+
+	rndc now allows addresses to be set in the server clauses.
+
+	New option "allow-query-cache".  This lets "allow-query"
+	be used to specify the default zone access level rather
+	than having to have every zone override the global value.
+	"allow-query-cache" can be set at both the options and view
+	levels.  If "allow-query-cache" is not set then "allow-recursion"
+	is used if set, otherwise "allow-query" is used if set
+	unless "recursion no;" is set in which case "none;" is used,
+	otherwise the default (localhost; localnets;) is used.
+
+	rndc: the source address can now be specified.
+
+	ixfr-from-differences now takes master and slave in addition
+	to yes and no at the options and view levels.
+
+	Allow the journal's name to be changed via named.conf.
+
+	'rndc notify zone [class [view]]' resend the NOTIFY messages
+	for the specified zone.
+
+	'dig +trace' now randomly selects the next servers to try.
+	Report if there is a bad delegation.
+
+	Improve check-names error messages.
+
+	Make public the function to read a key file, dst_key_read_public().
+
+	dig now returns the byte count for axfr/ixfr.
+			
+	allow-update is now settable at the options / view level.
+
+	named-checkconf now checks the logging configuration.
+
+	host now can turn on memory debugging flags with '-m'.
+
+	Don't send notify messages to self.
+
+	Perform sanity checks on NS records which refer to 'in zone' names.
+
+	New zone option "notify-delay".  Specify a minimum delay
+	between sets of NOTIFY messages.
+
+	Extend adjusting TTL warning messages.
+
+	Named and named-checkzone can now both check for non-terminal
+	wildcard records.
+
+	"rndc freeze/thaw" now freezes/thaws all zones.
+
+	named-checkconf now check acls to verify that they only
+	refer to existing acls.
+
+	The server syntax has been extended to support a range of
+	servers.
+
+	Report differences between hints and real NS rrset and
+	associated address records.
+
+	Preserve the case of domain names in rdata during zone
+	transfers.
+
+	Restructured the data locking framework using architecture
+	dependent atomic operations (when available), improving
+	response performance on multi-processor machines significantly.
+	x86, x86_64, alpha, powerpc, and mips are currently supported.
+
+	UNIX domain controls are now supported.
+
+	Add support for additional zone file formats for improving
+	loading performance.  The masterfile-format option in
+	named.conf can be used to specify a non-default format.  A
+	separate command named-compilezone was provided to generate
+	zone files in the new format.  Additionally, the -I and -O
+	options for dnssec-signzone specify the input and output
+	formats.
+
+	dnssec-signzone can now randomize signature end times
+	(dnssec-signzone -j jitter).
+
+	Add support for CH A record.
+
+	Add additional zone data constancy checks.  named-checkzone
+	has extended checking of NS, MX and SRV record and the hosts
+	they reference.  named has extended post zone load checks.
+	New zone options: check-mx and integrity-check.
+
+
+	edns-udp-size can now be overridden on a per server basis.
+
+	dig can now specify the EDNS version when making a query.
+
+	Added framework for handling multiple EDNS versions.
+
+	Additional memory debugging support to track size and mctx
+	arguments.
+
+	Detect duplicates of UDP queries we are recursing on and
+	drop them.  New stats category "duplicates".
+
+	"USE INTERNAL MALLOC" is now runtime selectable.
+
+	The lame cache is now done on a <qname,qclass,qtype> basis
+	as some servers only appear to be lame for certain query
+	types.
+
+	Limit the number of recursive clients that can be waiting
+	for a single query (<qname,qtype,qclass>) to resolve.  New
+	options clients-per-query and max-clients-per-query.
+
+	dig: report the number of extra bytes still left in the
+	packet after processing all the records.
+
+	Support for IPSECKEY rdata type.
+
+	Raise the UDP recieve buffer size to 32k if it is less than 32k.
+
+	x86 and x86_64 now have seperate atomic locking implementations.
+
+	named-checkconf now validates update-policy entries.
+
+	Attempt to make the amount of work performed in a iteration
+	self tuning.  The covers nodes clean from the cache per
+	iteration, nodes written to disk when rewriting a master
+	file and nodes destroyed per iteration when destroying a
+	zone or a cache.
+
+	ISC string copy API.
+
+	Automatic empty zone creation for D.F.IP6.ARPA and friends.
+	Note: RFC 1918 zones are not yet covered by this but are
+	likely to be in a future release.
+
+	New options: empty-server, empty-contact, empty-zones-enable
+	and disable-empty-zone.
+
+	dig now has a '-q queryname' and '+showsearch' options.
+
+	host/nslookup now continue (default)/fail on SERVFAIL.
+
+	dig now warns if 'RA' is not set in the answer when 'RD'
+	was set in the query.  host/nslookup skip servers that fail
+	to set 'RA' when 'RD' is set unless a server is explicitly
+	set.
+
+	Integrate contibuted DLZ code into named.
+
+	Integrate contibuted IDN code from JPNIC.
+
+	libbind: corresponds to that from BIND 8.4.7.
+
+BIND 9.3.0
+
+	BIND 9.3.0 has a number of new features over 9.2,
+	including:
+
+	DNSSEC is now DS based (RFC 3658).
+	See also RFC 3845, doc/draft/draft-ietf-dnsext-dnssec-*.
+
+	DNSSEC lookaside validation.
+
+	check-names is now implemented.
+	rrset-order in more complete.
+
+	IPv4/IPv6 transition support, dual-stack-servers.
+
+	IXFR deltas can now be generated when loading master files,
+	ixfr-from-differences.
+
+	It is now possible to specify the size of a journal, max-journal-size.
+
+	It is now possible to define a named set of master servers to be
+	used in masters clause, masters.
+
+	The advertised EDNS UDP size can now be set, edns-udp-size.
+
+	allow-v6-synthesis has been obsoleted.
+
+	NOTE:
+	* Zones containing MD and MF will now be rejected.
+	* dig, nslookup name. now report "Not Implemented" as
+	  NOTIMP rather than NOTIMPL.  This will have impact on scripts
+	  that are looking for NOTIMPL.
+
+	libbind: corresponds to that from BIND 8.4.5.
+
+BIND 9.2.0
+
+	BIND 9.2.0 has a number of new features over 9.1,
+	including:
+
+	  - The size of the cache can now be limited using the
+            "max-cache-size" option.
+
+	  - The server can now automatically convert RFC1886-style
+	    recursive lookup requests into RFC2874-style lookups, 
+	    when enabled using the new option "allow-v6-synthesis".
+            This allows stub resolvers that support AAAA records
+            but not A6 record chains or binary labels to perform
+            lookups in domains that make use of these IPv6 DNS
+            features.
+
+	  - Performance has been improved.
+
+	  - The man pages now use the more portable "man" macros
+	    rather than the "mandoc" macros, and are installed
+            by "make install".
+
+          - The named.conf parser has been completely rewritten.
+            It now supports "include" directives in more
+            places such as inside "view" statements, and it no
+            longer has any reserved words.
+
+          - The "rndc status" command is now implemented.
+
+	  - rndc can now be configured automatically.
+
+	  - A BIND 8 compatible stub resolver library is now
+	    included in lib/bind.
+
+	  - OpenSSL has been removed from the distribution.  This
+	    means that to use DNSSEC, OpenSSL must be installed and
+	    the --with-openssl option must be supplied to configure.
+	    This does not apply to the use of TSIG, which does not
+	    require OpenSSL.
+
+	  - The source distribution now builds on Windows.
+	    See win32utils/readme1.txt and win32utils/win32-build.txt
+	    for details.
+
+	This distribution also includes a new lightweight stub
+	resolver library and associated resolver daemon that fully
+	support forward and reverse lookups of both IPv4 and IPv6
+	addresses.  This library is considered experimental and
+	is not a complete replacement for the BIND 8 resolver library.
+	Applications that use the BIND 8 res_* functions to perform
+	DNS lookups or dynamic updates still need to be linked against
+	the BIND 8 libraries.  For DNS lookups, they can also use the
+	new "getrrsetbyname()" API.
+
+	BIND 9.2 is capable of acting as an authoritative server
+	for DNSSEC secured zones.  This functionality is believed to
+	be stable and complete except for lacking support for
+	verifications involving wildcard records in secure zones.
+
+	When acting as a caching server, BIND 9.2 can be configured
+	to perform DNSSEC secure resolution on behalf of its clients.
+	This part of the DNSSEC implementation is still considered
+	experimental.  For detailed information about the state of the
+	DNSSEC implementation, see the file doc/misc/dnssec.
+
+	There are a few known bugs:
+
+		On some systems, IPv6 and IPv4 sockets interact in
+		unexpected ways.  For details, see doc/misc/ipv6.
+		To reduce the impact of these problems, the server
+		no longer listens for requests on IPv6 addresses
+		by default.  If you need to accept DNS queries over
+		IPv6, you must specify "listen-on-v6 { any; };"
+		in the named.conf options statement.
+
+		FreeBSD prior to 4.2 (and 4.2 if running as non-root)
+		and OpenBSD prior to 2.8 log messages like
+		"fcntl(8, F_SETFL, 4): Inappropriate ioctl for device".
+		This is due to a bug in "/dev/random" and impacts the
+		server's DNSSEC support.
+
+		OS X 10.1.4 (Darwin 5.4), OS X 10.1.5 (Darwin 5.5) and
+		OS X 10.2 (Darwin 6.0) reports errors like
+		"fcntl(3, F_SETFL, 4): Operation not supported by device".
+		This is due to a bug in "/dev/random" and impacts the
+		server's DNSSEC support.
+
+		--with-libtool does not work on AIX.
+
+	A bug in some versions of the Microsoft DNS server can cause zone
+        transfers from a BIND 9 server to a W2K server to fail.  For details,
+	see the "Zone Transfers" section in doc/misc/migration.
 
 	For a detailed list of user-visible changes from
 	previous releases, see the CHANGES file.
 
-	For up-to-date release notes and errata, see
-	http://www.isc.org/software/bind9/releasenotes
-
-BIND 9.11.1
-	
-	BIND 9.11.1 is a maintenance release and addresses the security
-	flaws disclosed in CVE-2016-6170, CVE-2016-8864, CVE-2016-9131,
-	CVE-2016-9147, CVE-2016-9778, CVE-2017-3135, CVE-2017-3136,
-	CVE-2017-3137 and CVE-2017-3138.
-
-BIND 9.11.0
-
-	BIND 9.11.0 includes a number of changes from BIND 9.10 and earlier
-	releases.  New features include:
-
-	- Added support for Catalog Zones, a new method for provisioning
-	  servers: a list of zones to be served is stored in a DNS zone,
-	  along with their configuration parameters. Changes to the
-	  catalog zone are propagated to slaves via normal AXFR/IXFR,
-	  whereupon the zones that are listed in it are automatically
-	  added, deleted or reconfigured.
-	- Added support for "dnstap", a fast and flexible method of
-	  capturing and logging DNS traffic.
-	- Added support for "dyndb", a new API for loading zone data
-	  from an external database, developed by Red Hat for the FreeIPA
-	  project.
-	- "fetchlimit" quotas are now compiled in by default.  These
-	  are for the use of recursive resolvers that are are under
-	  high query load for domains whose authoritative servers are
-	  nonresponsive or are experiencing a denial of service attack:
-	  + "fetches-per-server" limits the number of simultaneous queries
-	    that can be sent to any single authoritative server.  The
-	    configured value is a starting point; it is automatically
-	    adjusted downward if the server is partially or completely
-	    non-responsive. The algorithm used to adjust the quota can be
-	    configured via the "fetch-quota-params" option.
-	  + "fetches-per-zone" limits the number of simultaneous queries
-	    that can be sent for names within a single domain.  (Note:
-	    Unlike "fetches-per-server", this value is not self-tuning.)
-	  + New stats counters have been added to count
-	    queries spilled due to these quotas.
-	- Added a new "dnssec-keymgr" key mainenance utility, which can
-	  generate or update keys as needed to ensure that a zone's
-	  keys match a defined DNSSEC policy.
-	- The experimental "SIT" feature in BIND 9.10 has been renamed
-	  "COOKIE" and is no longer optional. EDNS COOKIE is a mechanism
-	  enabling clients to detect off-path spoofed responses, and
-	  servers to detect spoofed-source queries.  Clients that identify
-	  themselves using COOKIE options are not subject to response rate
-	  limiting (RRL) and can receive larger UDP responses.
-	- SERVFAIL responses can now be cached for a limited time
-	  (defaulting to 1 second, with an upper limit of 30).
-	  This can reduce the frequency of retries when a query is
-	  persistently failing.
-	- Added an "nsip-wait-recurse" switch to RPZ. This causes NSIP
-	  rules to be skipped if a name server IP address isn't in the
-	  cache yet; the address will be looked up and the rule will be
-	  applied on future queries.
-	- Added a Python RNDC module. This allows multiple commands to
-	  sent over a persistent RNDC channel, which saves time.
-	- The "controls" block in named.conf can now grant read-only
-	  "rndc" access to specified clients or keys. Read-only clients
-	  could, for example, check "rndc status" but could not
-	  reconfigure or shut down the server.
-	- "rndc" commands can now return arbitrarily large amounts of
-	  text to the caller.
-	- The zone serial number of a dynamically updatable zone
-	  can now be set via "rndc signing -serial <number> <zonename>".
-	  This allows inline-signing zones to be set to a specific
-	  serial number.
-	- The new "rndc nta" command can be used to set a Negative
-	  Trust Anchor (NTA), disabling DNSSEC validation for a
-	  specific domain; this can be used when responses from a
-	  domain are known to be failing validation due to administrative
-	  error rather than because of a spoofing attack.  Negative
-	  trust anchors are strictly temporary; by default they expire
-	  after one hour, but can be configured to last up to one week.
-	- "rndc delzone" can now be used on zones that were not originally
-	  created by "rndc addzone".
-	- "rndc modzone" reconfigures a single zone, without requiring
-	  the entire server to be reconfigured.
-	- "rndc showzone" displays the current configuration of a zone.
-	- "rndc managed-keys" can be used to check the status of RFC 5001
-	  managed trust anchors, or to force trust anchors to be refreshed.
-	- "max-cache-size" can now be set to a percentage of available
-	  memory. The default is 90%.
-	- Update forwarding performance has been improved by allowing
-	  a single TCP connection to be shared by multiple updates.
-	- The EDNS Client Subnet (ECS) option is now supported for
-	  authoritative servers; if a query contains an ECS option
-	  then ACLs containing "geoip" or "ecs" elements can match
-	  against the the address encoded in the option.  This can be
-	  used to select a view for a query, so that different answers
-	  can be provided depending on the client network.
-	- The EDNS EXPIRE option has been implemented on the client
-	  side, allowing a slave server to set the expiration timer
-	  correctly when transferring zone data from another slave
-	  server.
-	- The key generation and manipulation tools (dnssec-keygen,
-	  dnssec-settime, dnssec-importkey, dnssec-keyfromlabel) now
-	  take "-Psync" and "-Dsync" options to set the publication
-	  and deletion times of CDS and CDNSKEY parent-synchronization
-	  records.  Both named and dnssec-signzone can now publish and
-	  remove these records at the scheduled times.
-	- A new "minimal-any" option reduces the size of UDP responses
-	  for query type ANY by returning a single arbitrarily selected
-	  RRset instead of all RRsets.
-	- A new "masterfile-style" zone option controls the formatting
-	  of text zone files:  When set to "full", a zone file is dumped
-	  in single-line-per-record format.
-	- "serial-update-method" can now be set to "date". On update,
-	  the serial number will be set to the current date in YYYYMMDDNN
-	  format.
-	- "dnssec-signzone -N date" sets the serial number to YYYYMMDDNN.
-	- "named -L <filename>" causes named to send log messages to
-	   the specified file by default instead of to the system log.
-	- "dig +ttlunits" prints TTL values with time-unit suffixes:
-	  w, d, h, m, s for weeks, days, hours, minutes, and seconds.
-	- "dig +unknownformat" prints dig output in RFC 3597 "unknown
-	  record" presentation format.
-	- "dig +ednsopt" allows dig to set arbitrary EDNS options on
-	  requests.
-	- "dig +ednsflags" allows dig to set yet-to-be-defined EDNS
-	  flags on requests.
-	- "mdig" is an alternate version of dig which sends multiple
-	  pipelined TCP queries to a server.  Instead of waiting for a
-	  response after sending a query, it sends all queries
-	  immediately and displays responses in the order received.
-	- "serial-query-rate" no longer controls NOTIFY messages.
-	  These are separately controlled by "notify-rate" and
-	  "startup-notify-rate".
-	- "nsupdate" now performs "check-names" processing by default
-	  on records to be added.  This can be disabled with
-	  "check-names no".
-	- The statistics channel now supports DEFLATE compression,
-	  reducing the size of the data sent over the network when
-	  querying statistics.
-	- New counters have been added to the statistics channel
-	  to track the sizes of incoming queries and outgoing responses in
-	  histogram buckets, as specified in RSSAC002.
-	- A new NXDOMAIN redirect method (option "nxdomain-redirect")
-	  has been added, allowing redirection to a specified DNS
-	  namespace instead of a single redirect zone.
-	- When starting up, named now ensures that no other named
-	  process is already running.
-	- Files created by named to store information, including "mkeys"
-	  and "nzf" files, are now named after their corresponding views
-	  unless the view name contains characters incompatible with use
-	  as a filename. Old style filenames (based on the hash of the
-	  view name) will still work.
-
-	This release addresses the security flaws described in
-	CVE-2014-3214, CVE-2014-3859, CVE-2014-8500, CVE-2014-8680,
-	CVE-2015-1349, CVE-2015-5477, CVE-2015-5722, CVE-2015-5986,
-	CVE-2015-8000, CVE-2015-8704, CVE-2015-8705, CVE-2016-1285,
-	CVE-2016-1286, CVE-2016-2088, CVE-2016-2775 and CVE-2016-2776.
 
 Building
 
@@ -217,15 +417,15 @@ Building
 		FreeBSD 4.10, 5.2.1, 6.2
 		HP-UX 11.11
 		Mac OS X 10.5
-		NetBSD 3.x, 4.0-beta, 5.0-beta
+		NetBSD 3.x and 4.0-beta
 		OpenBSD 3.3 and up
 		Solaris 8, 9, 9 (x86), 10
 		Ubuntu 7.04, 7.10
 		Windows XP/2003/2008
 
-	NOTE:  As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
-	Windows, including Windows NT and Windows 2000, are no longer
-	supported.
+        NOTE:  As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
+        Windows, including Windows NT and Windows 2000, are no longer
+        supported.
 
 	We have recent reports from the user community that a supported
 	version of BIND will build and run on the following systems:
@@ -233,12 +433,12 @@ Building
 		AIX 4.3, 5L
 		CentOS 4, 4.5, 5
 		Darwin 9.0.0d1/ARM
-		Debian 4, 5, 6
-		Fedora Core 5, 7, 8
-		FreeBSD 6, 7, 8
+		Debian 4
+		Fedora Core 5, 7
+		FreeBSD 6.1
 		HP-UX 11.23 PA
-		MacOS X 10.5, 10.6, 10.7
-		Red Hat Enterprise Linux 4, 5, 6
+		MacOS X 10.4, 10.5
+		Red Hat Enterprise Linux 4, 5
 		SCO OpenServer 5.0.6
 		Slackware 9, 10
 		SuSE 9, 10
@@ -254,16 +454,15 @@ Building
 	configure will affect compilation:
 
 	    CC
-		The C compiler to use.  configure tries to figure
+		The C compiler to use.	configure tries to figure
 		out the right one for supported systems.
 
 	    CFLAGS
 		C compiler flags.  Defaults to include -g and/or -O2
-		as supported by the compiler.  Please include '-g'
-		if you need to set CFLAGS.
+		as supported by the compiler.  
 
 	    STD_CINCLUDES
-		System header file directories.  Can be used to specify
+		System header file directories.	 Can be used to specify
 		where add-on thread or IPv6 support is, for example.
 		Defaults to empty string.
 
@@ -273,14 +472,13 @@ Building
 
 		Possible settings:
 		Change the default syslog facility of named/lwresd.
-		  -DISC_FACILITY=LOG_LOCAL0
+		  -DISC_FACILITY=LOG_LOCAL0	
 		Enable DNSSEC signature chasing support in dig.
-		  (This feature is deprecated. Use `delv` instead.)
 		  -DDIG_SIGCHASE=1 (sets -DDIG_SIGCHASE_TD=1 and
 				    -DDIG_SIGCHASE_BU=1)
 		Disable dropping queries from particular well known ports.
 		  -DNS_CLIENT_DROPPORT=0
-		Sibling glue checking in named-checkzone is enabled by default.
+	        Sibling glue checking in named-checkzone is enabled by default.
 		To disable the default check set.  -DCHECK_SIBLING=0
 		named-checkzone checks out-of-zone addresses by default.
 		To disable this default set.  -DCHECK_LOCAL=0
@@ -302,60 +500,35 @@ Building
 	    BUILD_CFLAGS (optional)
 	    BUILD_CPPFLAGS (optional)
 		Possible Settings:
-		-DNEED_OPTARG=1         (optarg is not declared in <unistd.h>)
+		-DNEED_OPTARG=1		(optarg is not declared in <unistd.h>)
 	    BUILD_LDFLAGS (optional)
 	    BUILD_LIBS (optional)
 
-	On most platforms, BIND 9 is built with multithreading
-	support, allowing it to take advantage of multiple CPUs.
-	You can configure this by specifying "--enable-threads" or
-	"--disable-threads" on the configure command line.  The default
-	is to enable threads, except on some older operating systems
-	on which threads are known to have had problems in the past.
-	(Note: Prior to BIND 9.10, the default was to disable threads on
-	Linux systems; this has been reversed.  On Linux systems, the
-	threaded build is known to change BIND's behavior with respect
-	to file permissions; it may be necessary to specify a user with
-	the -u option when running named.)
-
 	To build shared libraries, specify "--with-libtool" on the
 	configure command line.
 
-	Certain compiled-in constants and default settings can be
-	increased to values better suited to large servers with abundant
-	memory resources (e.g, 64-bit servers with 12G or more of memory)
-	by specifying "--with-tuning=large" on the configure command
-	line. This can improve performance on big servers, but will
-	consume more memory and may degrade performance on smaller
-	systems.
-
 	For the server to support DNSSEC, you need to build it
-	with crypto support.  You must have OpenSSL 1.0.1t
+	with crypto support.  You must have OpenSSL 0.9.5a
 	or newer installed and specify "--with-openssl" on the
 	configure command line.  If OpenSSL is installed under
 	a nonstandard prefix, you can tell configure where to
 	look for it using "--with-openssl=/prefix".
 
-	To support the HTTP statistics channel, the server must
-	be linked with at least one of the following: libxml2
-	(http://xmlsoft.org) or json-c (https://github.com/json-c).
-	If these are installed at a nonstandard prefix, use
-	"--with-libxml2=/prefix" or "--with-libjson=/prefix".
-
-	To support compression on the HTTP statistics channel, the
-	server must be linked against libzlib (--with-zlib=/prefix).
-
-	Python requires 'argparse' and 'ply' to be available.
-	'argparse' is a standard module as of Python 2.7 and Python 3.2.
-
-	On some platforms it is necessary to explicitly request large
+	On some platforms it is necessary to explictly request large
 	file support to handle files bigger than 2GB.  This can be
 	done by "--enable-largefile" on the configure command line.
 
-	Support for the "fixed" rrset-order option can be enabled
-	or disabled by specifying "--enable-fixed-rrset" or
-	"--disable-fixed-rrset" on the configure command line.
-	The default is "disabled", to reduce memory footprint.
+	On some platforms, BIND 9 can be built with multithreading
+	support, allowing it to take advantage of multiple CPUs.
+	You can specify whether to build a multithreaded BIND 9 
+	by specifying "--enable-threads" or "--disable-threads"
+	on the configure command line.  The default is operating
+	system dependent.
+
+        Support for the "fixed" rrset-order option can be enabled
+        or disabled by specifying "--enable-fixed-rrset" or
+        "--disable-fixed-rrset" on the configure command line.
+        The default is "disabled", to reduce memory footprint.
 
 	If your operating system has integrated support for IPv6, it
 	will be used automatically.  If you have installed KAME IPv6
@@ -365,7 +538,7 @@ Building
 	By default, installation is into /usr/local, but this can be changed
 	with the "--prefix" option when running "configure".
 
-	You may specify the option "--sysconfdir" to set the directory
+	You may specify the option "--sysconfdir" to set the directory 
 	where configuration files like "named.conf" go by default,
 	and "--localstatedir" to set the default parent directory
 	of "run/named.pid".   For backwards compatibility with BIND 8,
@@ -375,7 +548,7 @@ Building
 	defaults to "$prefix/var".
 
 	To see additional configure options, run "configure --help".
-	Note that the help message does not reflect the BIND 8
+	Note that the help message does not reflect the BIND 8 
 	compatibility defaults for sysconfdir and localstatedir.
 
 	If you're planning on making changes to the BIND 9 source, you
@@ -387,7 +560,7 @@ Building
 
 	Building with gcc is not supported, unless gcc is the vendor's usual
 	compiler (e.g. the various BSD systems, Linux).
-
+	
 	Known compiler issues:
 	* gcc-3.2.1 and gcc-3.1.1 is known to cause problems with solaris-x86.
 	* gcc prior to gcc-3.2.3 ultrasparc generates incorrect code at -02.
@@ -403,11 +576,6 @@ Building
 	libraries.  sh-utils-1.16 provides a "printf" which compiles
 	on SunOS 4.
 
-Known limitations
-
-	Linux requires kernel build 2.6.39 or later to get the
-	performance benefits from using multiple sockets.
-
 Documentation
 
 	The BIND 9 Administrator Reference Manual is included with the
@@ -426,94 +594,25 @@ Documentation
 	Frequently asked questions and their answers can be found in
 	FAQ.
 
-	Additional information on various subjects can be found
-	in the other README files.
-
-
-Change Log
-
-	A detailed list of all changes to BIND 9 is included in the
-	file CHANGES, with the most recent changes listed first.
-	Change notes include tags indicating the category of the
-	change that was made; these categories are:
-
-	   [func]         New feature
-
-	   [bug]          General bug fix
-
-	   [security]     Fix for a significant security flaw
-
-	   [experimental] Used for new features when the syntax
-			  or other aspects of the design are still
-			  in flux and may change
-
-	   [port]         Portability enhancement
-
-	   [maint]        Updates to built-in data such as root
-			  server addresses and keys
-
-	   [tuning]       Changes to built-in configuration defaults
-			  and constants to improve performance
-
-	   [performance]  Other changes to improve server performance
-
-	   [protocol]     Updates to the DNS protocol such as new
-			  RR types
-
-	   [test]         Changes to the automatic tests, not
-			  affecting server functionality
-
-	   [cleanup]      Minor corrections and refactoring
-
-	   [doc]          Documentation
-
-	   [contrib]	  Changes to the contributed tools and
-			  libraries in the 'contrib' subdirectory
-
-	   [placeholder]  Used in the master development branch to
-			  reserve change numbers for use in other
-			  branches, e.g. when fixing a bug that only
-			  exists in older releases
-
-	In general, [func] and [experimental] tags will only appear
-	in new-feature releases (i.e., those with version numbers
-	ending in zero).  Some new functionality may be backported to
-	older releases on a case-by-case basis.  All other change
-	types may be applied to all currently-supported releases.
-
 
 Bug Reports and Mailing Lists
 
-	Bug reports should be sent to:
+	Bugs reports should be sent to
 
 		bind9-bugs@isc.org
 
-	Feature requests can be sent to:
+	To join the BIND Users mailing list, send mail to
 
-		bind-suggest@isc.org
+		bind-users-request@isc.org
 
-	To join or view the archives of the BIND Users mailing list,
-	visit:
+	archives of which can be found via
 
-		https://lists.isc.org/mailman/listinfo/bind-users
+		http://www.isc.org/ops/lists/
 
 	If you're planning on making changes to the BIND 9 source
-	code, you may also want to join the BIND Workers mailing
-	list:
+	code, you might want to join the BIND Workers mailing list.
+	Send mail to
 
-		https://lists.isc.org/mailman/listinfo/bind-workers
-
-	Information on read-only Git access, coding style and developer
-	guidelines can be found at:
-
-		http://www.isc.org/git/
+		bind-workers-request@isc.org
 
 
-Acknowledgments
-
-	- This product includes software developed by the OpenSSL Project
-	  for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/).
-	- This product includes cryptographic software written by Eric
-	  Young (eay@cryptsoft.com).
-	- This product includes software written by Tim Hudson
-	  (tjh@cryptsoft.com).

README.idnkit

@@ -0,0 +1,112 @@
+
+			BIND-9 IDN patch
+
+	       Japan Network Information Center (JPNIC)
+
+
+* What is this patch for?
+
+This patch adds internationalized domain name (IDN) support to BIND-9.
+You'll get internationalized version of dig/host/nslookup commands.
+
+    + internationalized dig/host/nslookup
+	dig/host/nslookup accepts non-ASCII domain names in the local
+	codeset (such as Shift JIS, Big5 or ISO8859-1) determined by
+	the locale information.  The domain names are normalized and
+	converted to the encoding on the DNS protocol, and sent to DNS
+	servers.  The replies are converted back to the local codeset
+	and displayed.
+
+
+* Compilation & installation
+
+0. Prerequisite
+
+You have to build and install idnkit before building this patched version
+of bind-9.
+
+1. Running configure script
+
+Run `configure' in the top directory.  See `README' for the
+configuration options.
+
+This patch adds the following 4 options to `configure'.  You should
+at least specify `--with-idn' option to enable IDN support.
+
+    --with-idn[=IDN_PREFIX]
+	To enable IDN support, you have to specify `--with-idn' option.
+	The argument IDN_PREFIX is the install prefix of idnkit.  If
+	IDN_PREFIX is omitted, PREFIX (derived from `--prefix=PREFIX')
+	is assumed.
+
+    --with-libiconv[=LIBICONV_PREFIX]
+	Specify this option if idnkit you have installed links GNU
+	libiconv.  The argument LIBICONV_PREFIX is install prefix of
+	GNU libiconv.  If the argument is omitted, PREFIX (derived
+	from `--prefix=PREFIX') is assumed.
+
+	`--with-libiconv' is shorthand option for GNU libiconv.
+
+	    --with-libiconv=/usr/local
+
+	This is equivalent to:
+
+	    --with-iconv='-L/usr/local/lib -R/usr/local/lib -liconv'
+
+	`--with-libiconv' assumes that your C compiler has `-R'
+	option, and that the option adds the specified run-time path
+	to an executable binary.  If `-R' option of your compiler has
+	different meaning, or your compiler lacks the option, you
+	should use `--with-iconv' option instead.  Binary command
+	without run-time path information might be unexecutable.
+	In that case, you would see an error message like:
+
+	    error in loading shared libraries: libiconv.so.2: cannot
+	    open shared object file
+
+	If both `--with-libiconv' and `--with-iconv' options are
+	specified, `--with-iconv' is prior to `--with-libiconv'.
+
+    --with-iconv=ICONV_LIBSPEC
+	If your libc doesn't provide iconv(), you need to specify the
+	library containing iconv() with this option.  `ICONV_LIBSPEC'
+	is the argument(s) to `cc' or `ld' to link the library, for
+	example, `--with-iconv="-L/usr/local/lib -liconv"'.
+	You don't need to specify the header file directory for "iconv.h"
+	to the compiler, as it isn't included directly by bind-9 with
+	this patch.
+
+    --with-idnlib=IDN_LIBSPEC
+	With this option, you can explicitly specify the argument(s)
+	to `cc' or `ld' to link the idnkit's library, `libidnkit'.  If
+	this option is not specified, `-L${PREFIX}/lib -lidnkit' is
+	assumed, where ${PREFIX} is the installation prefix specified
+	with `--with-idn' option above.  You may need to use this
+	option to specify extra arguments, for example,
+	`--with-idnlib="-L/usr/local/lib -R/usr/local/lib -lidnkit"'.
+
+Please consult `README' for other configuration options.
+
+Note that if you want to specify some extra header file directories,
+you should use the environment variable STD_CINCLUDES instead of
+CFLAGS, as described in README.
+
+2. Compilation and installation
+
+After running "configure", just do
+
+	make
+	make install
+
+for compiling and installing.
+
+
+* Contact information
+
+Please see http//www.nic.ad.jp/en/idn/ for the latest news
+about idnkit and this patch.
+
+Bug reports and comments on this kit should be sent to
+mdnkit-bugs@nic.ad.jp and idn-cmt@nic.ad.jp, respectively.
+
+; $Id: README.idnkit,v 1.2.762.1 2009/01/18 23:25:14 marka Exp $

README.pkcs11

@@ -0,0 +1,61 @@
+
+			BIND-9 PKCS#11 support
+
+Prerequisite
+
+The PKCS#11 support needs a PKCS#11 OpenSSL engine based on the Solaris one,
+released the 2007-11-21 for OpenSSL 0.9.8g, with a bug fix (call to free)
+and some improvements, including user friendly PIN management.
+
+Compilation
+
+"configure --with-pkcs11 ..."
+
+PKCS#11 Libraries
+
+Tested with Solaris one with a SCA board and with openCryptoki with the
+software token.
+
+OpenSSL Engines
+
+With PKCS#11 support the PKCS#11 engine is statically loaded but at its
+initialization it dynamically loads the PKCS#11 objects.
+Even the pre commands are therefore unused they are defined with:
+ SO_PATH:
+   define: PKCS11_SO_PATH
+   default: /usr/local/lib/engines/engine_pkcs11.so
+ MODULE_PATH:
+   define: PKCS11_MODULE_PATH
+   default: /usr/lib/libpkcs11.so
+Without PKCS#11 support, a specific OpenSSL engine can be still used
+by defining ENGINE_ID at compile time.
+
+PKCS#11 tools
+
+The contrib/pkcs11-keygen directory contains a set of experimental tools
+to handle keys stored in a Hardware Security Module at the benefit of BIND.
+
+The patch for OpenSSL 0.9.8g is in this directory. Read its README.pkcs11
+for the way to use it (these are the original notes so with the original
+path, etc. Define OPENCRYPTOKI to use it with openCryptoki.)
+
+PIN management
+
+With the just fixed PKCS#11 OpenSSL engine, the PIN should be entered
+each time it is required. With the improved engine, the PIN should be
+entered the first time it is required or can be configured in the
+OpenSSL configuration file (aka. openssl.cnf) by adding in it:
+ - at the beginning:
+	openssl_conf = openssl_def
+ - at any place these sections:
+	[ openssl_def ]
+	engines = engine_section
+	[ engine_section ]
+	pkcs11 = pkcs11_section
+	[ pkcs11_section ]
+	PIN = put__your__pin__value__here
+
+Note
+
+Some names here are registered trademarks, at least Solaris is a trademark
+of Sun Microsystems Inc...

RELEASE-NOTES-BIND-9.6.3.html

@@ -0,0 +1,165 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml"><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /><title></title><link rel="stylesheet" href="release-notes.css" type="text/css" /><meta name="generator" content="DocBook XSL Stylesheets V1.75.2" /></head><body><div class="article"><div class="titlepage"><hr /></div>
+
+  <div class="section" title="Introduction"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3026830"></a>Introduction</h2></div></div></div>
+    
+    <p>
+			BIND 9.6.3 is the current release of BIND 9.6.
+		</p>
+    <p>
+			This document summarizes changes from BIND 9.6.2-P2 to BIND 9.6.3.
+			Please see the CHANGES file in the source code release for a
+			complete list of all changes.
+		</p>
+  </div>
+
+  <div class="section" title="Download"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3893341"></a>Download</h2></div></div></div>
+    
+    <p>
+			The latest development version of BIND 9 software can always be found
+	 		on our web site at
+      <a class="ulink" href="http://www.isc.org/downloads/development" target="_top">http://www.isc.org/downloads/development</a>.
+  		There you will find additional information about each release,
+ 			source code, and some pre-compiled versions for certain operating
+ 			systems.
+		</p>
+  </div>
+
+  <div class="section" title="Support"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3026768"></a>Support</h2></div></div></div>
+    
+    <p>Product support information is available on
+      <a class="ulink" href="http://www.isc.org/services/support" target="_top">http://www.isc.org/services/support</a>
+      for paid support options.  Free support is provided by our user
+ 			community via a mailing list.  Information on all public email
+ 			lists is available at
+      <a class="ulink" href="https://lists.isc.org/mailman/listinfo" target="_top">https://lists.isc.org/mailman/listinfo</a>.
+    </p>
+  </div>
+
+  <div class="section" title="New Features"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3893404"></a>New Features</h2></div></div></div>
+    
+		<div class="section" title="9.6.3"><div class="titlepage"><div><div><h3 class="title"><a id="id3893409"></a>9.6.3</h3></div></div></div>
+			
+			<p>None.</p>
+		</div>
+	</div>
+
+  <div class="section" title="Feature Changes"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3893420"></a>Feature Changes</h2></div></div></div>
+    
+		<div class="section" title="9.6.3"><div class="titlepage"><div><div><h3 class="title"><a id="id3893425"></a>9.6.3</h3></div></div></div>
+			
+			<p>None.</p>
+		</div>
+  </div>
+
+  <div class="section" title="Security Fixes"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3893436"></a>Security Fixes</h2></div></div></div>
+    
+		<div class="section" title="9.6.2-P3"><div class="titlepage"><div><div><h3 class="title"><a id="id3893441"></a>9.6.2-P3</h3></div></div></div>
+			
+	    <div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem">
+				 	Adding a NO DATA signed negative response to cache failed to clear
+				  any matching RRSIG records already in cache. A subsequent lookup
+				  of the cached NO DATA entry could crash named (INSIST) when the
+				  unexpected RRSIG was also returned with the NO DATA cache entry.
+				  [RT #22288] [CVE-2010-3613] [VU#706148]
+				</li><li class="listitem">
+					BIND, acting as a DNSSEC validator, was determining if the NS RRset
+				  is insecure based on a value that could mean either that the RRset
+				  is actually insecure or that there wasn't a matching key for the RRSIG
+				  in the DNSKEY RRset when resuming from validating the DNSKEY RRset.
+				  This can happen when in the middle of a DNSKEY algorithm rollover,
+				  when two different algorithms were used to sign a zone but only the
+				  new set of keys are in the zone DNSKEY RRset.
+					[RT #22309] [CVE-2010-3614] [VU#837744]
+				</li></ul></div>
+		</div>
+  </div>
+
+  <div class="section" title="Bug Fixes"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3026756"></a>Bug Fixes</h2></div></div></div>
+    
+			<div class="section" title="9.6.3"><div class="titlepage"><div><div><h3 class="title"><a id="id3026817"></a>9.6.3</h3></div></div></div>
+			
+	    <div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem">
+				BIND now builds with threads disabled in versions of NetBSD earlier
+                                than 5.0 and with pthreads enabled by default in NetBSD versions 5.0
+                                and higher. Also removes support for unproven-pthreads, mit-pthreads
+                                and ptl2. [RT #19203]
+				</li><li class="listitem">
+				HPUX now correctly defaults to using /dev/poll, which should
+				increase performance. [RT #21919]
+				</li><li class="listitem">
+			        If named is running as a threaded application, after an "rndc stop"
+			        command has been issued, other inbound TCP requests can cause named
+			        to hang and never complete shutdown. [RT #22108]
+				</li><li class="listitem">
+				When performing a GSS-TSIG signed dynamic zone update, memory could be
+				leaked. This causes an unclean shutdown and may affect long-running
+				servers. [RT #22573]
+				</li><li class="listitem">
+                                A bug in NetBSD and FreeBSD kernels with SO_ACCEPTFILTER enabled allows
+                                for a TCP DoS attack. Until there is a kernel fix, ISC is disabling
+                                SO_ACCEPTFILTER support in BIND. [RT #22589]
+				</li><li class="listitem">
+				Corrected a defect where a combination of dynamic updates and zone 
+				transfers incorrectly locked the in-memory zone database, causing
+				named to freeze. [RT #22614]
+				</li><li class="listitem">
+                                Don't run MX checks (check-mx) when the MX record points to ".".
+                                [RT #22645]
+				</li><li class="listitem">
+                                DST key reference counts can now be incremented via dst_key_attach.
+                                [RT #22672]
+				</li><li class="listitem">
+				isc_mutex_init_errcheck() in phtreads/mutex.c failed to destroy attr. [RT #22766]
+				</li><li class="listitem">
+                                 The Kerberos realm was being truncated when being pulled from the
+                                 the host prinicipal, make krb5-self updates fail. [RT #22770]
+				</li><li class="listitem">
+				named failed to preserve the case of domain names in RDATA which is not compressible when writing master files. [RT #22863]
+				</li><li class="listitem">
+There was a bug in how the clients-per-query code worked with some
+query patterns. This could result, in rare circumstances, in having all
+the client query slots filled with queries for the same DNS label,
+essentially ignoring the max-clients-per-query setting.
+[RT #22972]
+				</li></ul></div>
+		</div>
+		<div class="section" title="9.6.2-P3"><div class="titlepage"><div><div><h3 class="title"><a id="id3893557"></a>9.6.2-P3</h3></div></div></div>
+			
+	    <div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem">
+					Worked around a race condition in the cache database memory
+					handling.  Without this fix a DNS cache DB or ADB could
+					incorrectly stay in an over memory state, effectively refusing
+					further caching, which subsequently made a BIND 9 caching
+					server unworkable.
+					[RT #21818]
+				</li><li class="listitem">
+					Microsoft changed the behavior of sockets between NT/XP based
+				  stacks vs Vista/windows7 stacks. Server 2003/2008 have the older
+				  behavior, 2008r2 has the new behavior. With the change, different
+				  error results are possible, so ISC adapted BIND to handle the new
+				  error results.
+				  This resolves an issue where sockets would shut down on
+				  Windows servers causing named to stop responding to queries.
+					[RT #21906]
+				</li><li class="listitem">
+				 	Windows has non-POSIX compliant behavior in its rename() and unlink()
+				  calls. This caused journal compaction to fail on Windows BIND servers
+				  with the log error: "dns_journal_compact failed: failure".
+					[RT #22434]
+				</li></ul></div>
+
+		</div>
+  </div>
+
+  <div class="section" title="Thank You"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3893594"></a>Thank You</h2></div></div></div>
+    
+    <p>
+      Thank you to everyone who assisted us in making this release possible.
+      If you would like to contribute to ISC to assist us in continuing to make
+      quality open source software, please visit our donations page at
+      <a class="ulink" href="http://www.isc.org/supportisc" target="_top">http://www.isc.org/supportisc</a>.
+    </p>
+  </div>
+</div></body></html>

RELEASE-NOTES-BIND-9.6.3.txt

@@ -0,0 +1,118 @@
+     __________________________________________________________________
+
+Introduction
+
+   BIND 9.6.3 is the current release of BIND 9.6.
+
+   This document summarizes changes from BIND 9.6.2-P2 to BIND 9.6.3.
+   Please see the CHANGES file in the source code release for a complete
+   list of all changes.
+
+Download
+
+   The latest development version of BIND 9 software can always be found
+   on our web site at http://www.isc.org/downloads/development. There you
+   will find additional information about each release, source code, and
+   some pre-compiled versions for certain operating systems.
+
+Support
+
+   Product support information is available on
+   http://www.isc.org/services/support for paid support options. Free
+   support is provided by our user community via a mailing list.
+   Information on all public email lists is available at
+   https://lists.isc.org/mailman/listinfo.
+
+New Features
+
+9.6.3
+
+   None.
+
+Feature Changes
+
+9.6.3
+
+   None.
+
+Security Fixes
+
+9.6.2-P3
+
+     * Adding a NO DATA signed negative response to cache failed to clear
+       any matching RRSIG records already in cache. A subsequent lookup of
+       the cached NO DATA entry could crash named (INSIST) when the
+       unexpected RRSIG was also returned with the NO DATA cache entry.
+       [RT #22288] [CVE-2010-3613] [VU#706148]
+     * BIND, acting as a DNSSEC validator, was determining if the NS RRset
+       is insecure based on a value that could mean either that the RRset
+       is actually insecure or that there wasn't a matching key for the
+       RRSIG in the DNSKEY RRset when resuming from validating the DNSKEY
+       RRset. This can happen when in the middle of a DNSKEY algorithm
+       rollover, when two different algorithms were used to sign a zone
+       but only the new set of keys are in the zone DNSKEY RRset. [RT
+       #22309] [CVE-2010-3614] [VU#837744]
+
+Bug Fixes
+
+9.6.3
+
+     * BIND now builds with threads disabled in versions of NetBSD earlier
+       than 5.0 and with pthreads enabled by default in NetBSD versions
+       5.0 and higher. Also removes support for unproven-pthreads,
+       mit-pthreads and ptl2. [RT #19203]
+     * HPUX now correctly defaults to using /dev/poll, which should
+       increase performance. [RT #21919]
+     * If named is running as a threaded application, after an "rndc stop"
+       command has been issued, other inbound TCP requests can cause named
+       to hang and never complete shutdown. [RT #22108]
+     * When performing a GSS-TSIG signed dynamic zone update, memory could
+       be leaked. This causes an unclean shutdown and may affect
+       long-running servers. [RT #22573]
+     * A bug in NetBSD and FreeBSD kernels with SO_ACCEPTFILTER enabled
+       allows for a TCP DoS attack. Until there is a kernel fix, ISC is
+       disabling SO_ACCEPTFILTER support in BIND. [RT #22589]
+     * Corrected a defect where a combination of dynamic updates and zone
+       transfers incorrectly locked the in-memory zone database, causing
+       named to freeze. [RT #22614]
+     * Don't run MX checks (check-mx) when the MX record points to ".".
+       [RT #22645]
+     * DST key reference counts can now be incremented via dst_key_attach.
+       [RT #22672]
+     * isc_mutex_init_errcheck() in phtreads/mutex.c failed to destroy
+       attr. [RT #22766]
+     * The Kerberos realm was being truncated when being pulled from the
+       the host prinicipal, make krb5-self updates fail. [RT #22770]
+     * named failed to preserve the case of domain names in RDATA which is
+       not compressible when writing master files. [RT #22863]
+     * There was a bug in how the clients-per-query code worked with some
+       query patterns. This could result, in rare circumstances, in having
+       all the client query slots filled with queries for the same DNS
+       label, essentially ignoring the max-clients-per-query setting. [RT
+       #22972]
+
+9.6.2-P3
+
+     * Worked around a race condition in the cache database memory
+       handling. Without this fix a DNS cache DB or ADB could incorrectly
+       stay in an over memory state, effectively refusing further caching,
+       which subsequently made a BIND 9 caching server unworkable. [RT
+       #21818]
+     * Microsoft changed the behavior of sockets between NT/XP based
+       stacks vs Vista/windows7 stacks. Server 2003/2008 have the older
+       behavior, 2008r2 has the new behavior. With the change, different
+       error results are possible, so ISC adapted BIND to handle the new
+       error results. This resolves an issue where sockets would shut down
+       on Windows servers causing named to stop responding to queries. [RT
+       #21906]
+     * Windows has non-POSIX compliant behavior in its rename() and
+       unlink() calls. This caused journal compaction to fail on Windows
+       BIND servers with the log error: "dns_journal_compact failed:
+       failure". [RT #22434]
+
+Thank You
+
+   Thank you to everyone who assisted us in making this release possible.
+   If you would like to contribute to ISC to assist us in continuing to
+   make quality open source software, please visit our donations page at
+   http://www.isc.org/supportisc.

acconfig.h

@@ -1,12 +1,21 @@
 /*
- * Copyright (C) 1999-2005, 2007, 2008, 2012, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004, 2005, 2007, 2009  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2003  Internet Software Consortium.
  *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: acconfig.h,v 1.53 2008/12/01 23:47:44 tbox Exp $ */
+/* $Id: acconfig.h,v 1.51.334.2 2009/02/16 23:47:15 tbox Exp $ */
 
 /*! \file */
 
@@ -61,6 +70,9 @@
 /** define if gai_strerror() exists */
 #undef HAVE_GAISTRERROR
 
+/** define if arc4random() exists */
+#undef HAVE_ARC4RANDOM
+
 /**
  * define if pthread_setconcurrency() should be called to tell the
  * OS how many threads we might want to run.
@@ -120,17 +132,14 @@ int sigwait(const unsigned int *set, int *sig);
 /** define if you have strerror in the C library. */
 #undef HAVE_STRERROR
 
+/** Define if you are running under Compaq TruCluster. */
+#undef HAVE_TRUCLUSTER
+
 /* Define if OpenSSL includes DSA support */
 #undef HAVE_OPENSSL_DSA
 
-/* Define if you have getpassphrase in the C library. */
-#undef HAVE_GETPASSPHRASE
-
 /* Define to the length type used by the socket API (socklen_t, size_t, int). */
 #undef ISC_SOCKADDR_LEN_T
 
 /* Define if threads need PTHREAD_SCOPE_SYSTEM */
 #undef NEED_PTHREAD_SCOPE_SYSTEM
-
-/* Define to 1 if you have the uname library function. */
-#undef HAVE_UNAME

aclocal.m4

@@ -1,17 +1,2 @@
-sinclude(libtool.m4/libtool.m4)dnl
-sinclude(libtool.m4/ltoptions.m4)dnl
-sinclude(libtool.m4/ltsugar.m4)dnl
-sinclude(libtool.m4/ltversion.m4)dnl
-sinclude(libtool.m4/lt~obsolete.m4)dnl
+sinclude(./libtool.m4)dnl
 
-m4_divert_text(HELP_CANON, [[
-  NOTE: If PREFIX is not set, then the default values for --sysconfdir
-  and --localstatedir are /etc and /var, respectively.]])
-m4_divert_text(HELP_END, [[
-Professional support for BIND is provided by Internet Systems Consortium,
-Inc.  Information about paid support and training options is available at
-https://www.isc.org/support.
-
-Help can also often be found on the BIND Users mailing list
-(https://lists.isc.org/mailman/listinfo/bind-users) or in the #bind
-channel of the Freenode IRC service.]])

autogen.sh

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2015, 2016  Internet Systems Consortium, Inc. ("ISC")
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-
-# Run this script after modifying configure.in to generate configure
-autoreconf -i

bin/Makefile.in

@@ -1,17 +1,25 @@
-# Copyright (C) 1998-2001, 2004, 2007, 2009, 2012-2014, 2016  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004, 2007  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 1998-2001  Internet Software Consortium.
 #
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+# PERFORMANCE OF THIS SOFTWARE.
 
-# $Id: Makefile.in,v 1.29 2009/10/05 12:07:08 fdupont Exp $
+# $Id: Makefile.in,v 1.25 2007/06/19 23:46:59 tbox Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-SUBDIRS =	named rndc dig delv dnssec tools tests nsupdate \
-		check confgen @NZD_TOOLS@ @PYTHON_TOOLS@ @PKCS11_TOOLS@
+SUBDIRS =	named rndc dig dnssec tests nsupdate check
 TARGETS =
 
 @BIND9_MAKE_RULES@

bin/check/.cvsignore

@@ -0,0 +1,6 @@
+Makefile
+.libs
+*.la
+*.lo
+named-checkconf
+named-checkzone

bin/check/.gitignore

@@ -1,3 +0,0 @@
-.libs
-named-checkconf
-named-checkzone

bin/check/Makefile.in

@@ -1,29 +1,37 @@
-# Copyright (C) 2000-2007, 2009, 2012, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004-2007  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2000-2003  Internet Software Consortium.
 #
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+# PERFORMANCE OF THIS SOFTWARE.
 
-# $Id: Makefile.in,v 1.36 2009/12/05 23:31:40 each Exp $
+# $Id: Makefile.in,v 1.32 2007/06/19 23:46:59 tbox Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
 @BIND9_MAKE_INCLUDES@
 
 CINCLUDES =	${BIND9_INCLUDES} ${DNS_INCLUDES} ${ISCCFG_INCLUDES} \
-		${ISC_INCLUDES} @DST_OPENSSL_INC@
+		${ISC_INCLUDES}
 
-CDEFINES = 	@CRYPTO@ -DNAMED_CONFFILE=\"${sysconfdir}/named.conf\"
+CDEFINES = 	-DNAMED_CONFFILE=\"${sysconfdir}/named.conf\"
 CWARNINGS =
 
 DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
 ISCCFGLIBS =	../../lib/isccfg/libisccfg.@A@
 ISCLIBS =	../../lib/isc/libisc.@A@
-ISCNOSYMLIBS =	../../lib/isc/libisc-nosymtbl.@A@
 BIND9LIBS =	../../lib/bind9/libbind9.@A@
 
 DNSDEPLIBS =	../../lib/dns/libdns.@A@
@@ -31,8 +39,7 @@ ISCCFGDEPLIBS =	../../lib/isccfg/libisccfg.@A@
 ISCDEPLIBS =	../../lib/isc/libisc.@A@
 BIND9DEPLIBS =	../../lib/bind9/libbind9.@A@
 
-LIBS =		${ISCLIBS} @LIBS@
-NOSYMLIBS =	${ISCNOSYMLIBS} @LIBS@
+LIBS =		@LIBS@
 
 SUBDIRS =
 
@@ -61,15 +68,15 @@ named-checkzone.@O@: named-checkzone.c
 		-c ${srcdir}/named-checkzone.c
 
 named-checkconf@EXEEXT@: named-checkconf.@O@ check-tool.@O@ ${ISCDEPLIBS} \
-		${DNSDEPLIBS} ${ISCCFGDEPLIBS} ${BIND9DEPLIBS}
-	export BASEOBJS="named-checkconf.@O@ check-tool.@O@"; \
-	export LIBS0="${BIND9LIBS} ${ISCCFGLIBS} ${DNSLIBS}"; \
-	${FINALBUILDCMD}
+		${ISCCFGDEPLIBS} ${BIND9DEPLIBS}
+	${LIBTOOL_MODE_LINK} ${PURIFY} ${CC} ${CFLAGS} ${LDFLAGS} -o $@ \
+	named-checkconf.@O@ check-tool.@O@ ${BIND9LIBS} ${ISCCFGLIBS} \
+	${DNSLIBS} ${ISCLIBS} ${LIBS}
 
 named-checkzone@EXEEXT@: named-checkzone.@O@ check-tool.@O@ ${ISCDEPLIBS} ${DNSDEPLIBS}
-	export BASEOBJS="named-checkzone.@O@ check-tool.@O@"; \
-	export LIBS0="${ISCCFGLIBS} ${DNSLIBS}"; \
-	${FINALBUILDCMD}
+	${LIBTOOL_MODE_LINK} ${PURIFY} ${CC} ${CFLAGS} ${LDFLAGS} -o $@ \
+	named-checkzone.@O@ check-tool.@O@ ${ISCCFGLIBS} ${DNSLIBS} \
+	${ISCLIBS} ${LIBS}
 
 doc man:: ${MANOBJS}
 
@@ -87,12 +94,5 @@ install:: named-checkconf@EXEEXT@ named-checkzone@EXEEXT@ installdirs
 	for m in ${MANPAGES}; do ${INSTALL_DATA} ${srcdir}/$$m ${DESTDIR}${mandir}/man8; done
 	(cd ${DESTDIR}${mandir}/man8; rm -f named-compilezone.8; ${LINK_PROGRAM} named-checkzone.8 named-compilezone.8)
 
-uninstall::
-	rm -f ${DESTDIR}${mandir}/man8/named-compilezone.8
-	for m in ${MANPAGES}; do rm -f ${DESTDIR}${mandir}/man8/$$m ; done
-	rm -f ${DESTDIR}${sbindir}/named-compilezone@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkconf@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkzone@EXEEXT@
-
 clean distclean::
 	rm -f ${TARGETS} r1.htm

bin/check/check-tool.c

@@ -1,12 +1,21 @@
 /*
- * Copyright (C) 2000-2002, 2004-2016  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2000-2002  Internet Software Consortium.
  *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: check-tool.c,v 1.44 2011/12/22 07:32:39 each Exp $ */
+/* $Id: check-tool.c,v 1.35.36.5 2010/09/07 23:46:05 tbox Exp $ */
 
 /*! \file */
 
@@ -24,7 +33,6 @@
 #include <isc/mem.h>
 #include <isc/netdb.h>
 #include <isc/net.h>
-#include <isc/print.h>
 #include <isc/region.h>
 #include <isc/stdio.h>
 #include <isc/string.h>
@@ -32,17 +40,12 @@
 #include <isc/types.h>
 #include <isc/util.h>
 
-#include <dns/db.h>
-#include <dns/dbiterator.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
 #include <dns/name.h>
 #include <dns/rdata.h>
 #include <dns/rdataclass.h>
 #include <dns/rdataset.h>
-#include <dns/rdatasetiter.h>
-#include <dns/rdatatype.h>
-#include <dns/result.h>
 #include <dns/types.h>
 #include <dns/zone.h>
 
@@ -83,7 +86,6 @@
 static const char *dbtype[] = { "rbt" };
 
 int debug = 0;
-const char *journal = NULL;
 isc_boolean_t nomerge = ISC_TRUE;
 #if CHECK_LOCAL
 isc_boolean_t docheckmx = ISC_TRUE;
@@ -105,7 +107,6 @@ unsigned int zone_options = DNS_ZONEOPT_CHECKNS |
 			    DNS_ZONEOPT_CHECKWILDCARD |
 			    DNS_ZONEOPT_WARNMXCNAME |
 			    DNS_ZONEOPT_WARNSRVCNAME;
-unsigned int zone_options2 = 0;
 
 /*
  * This needs to match the list in bin/named/log.c.
@@ -195,10 +196,6 @@ checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
 		a->type == dns_rdatatype_a);
 	REQUIRE(aaaa == NULL || !dns_rdataset_isassociated(aaaa) ||
 		aaaa->type == dns_rdatatype_aaaa);
-
-	if (a == NULL || aaaa == NULL)
-		return (answer);
-
 	memset(&hints, 0, sizeof(hints));
 	hints.ai_flags = AI_CANONNAME;
 	hints.ai_family = PF_UNSPEC;
@@ -261,7 +258,8 @@ checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
 		}
 		return (ISC_TRUE);
 	}
-
+	if (a == NULL || aaaa == NULL)
+		return (answer);
 	/*
 	 * Check that all glue records really exist.
 	 */
@@ -575,93 +573,11 @@ setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp) {
 	return (ISC_R_SUCCESS);
 }
 
-/*% scan the zone for oversize TTLs */
-static isc_result_t
-check_ttls(dns_zone_t *zone, dns_ttl_t maxttl) {
-	isc_result_t result;
-	dns_db_t *db = NULL;
-	dns_dbversion_t *version = NULL;
-	dns_dbnode_t *node = NULL;
-	dns_dbiterator_t *dbiter = NULL;
-	dns_rdatasetiter_t *rdsiter = NULL;
-	dns_rdataset_t rdataset;
-	dns_fixedname_t fname;
-	dns_name_t *name;
-	dns_fixedname_init(&fname);
-	name = dns_fixedname_name(&fname);
-	dns_rdataset_init(&rdataset);
-
-	CHECK(dns_zone_getdb(zone, &db));
-	INSIST(db != NULL);
-
-	CHECK(dns_db_newversion(db, &version));
-	CHECK(dns_db_createiterator(db, 0, &dbiter));
-
-	for (result = dns_dbiterator_first(dbiter);
-	     result == ISC_R_SUCCESS;
-	     result = dns_dbiterator_next(dbiter)) {
-		result = dns_dbiterator_current(dbiter, &node, name);
-		if (result == DNS_R_NEWORIGIN)
-			result = ISC_R_SUCCESS;
-		CHECK(result);
-
-		CHECK(dns_db_allrdatasets(db, node, version, 0, &rdsiter));
-		for (result = dns_rdatasetiter_first(rdsiter);
-		     result == ISC_R_SUCCESS;
-		     result = dns_rdatasetiter_next(rdsiter)) {
-			dns_rdatasetiter_current(rdsiter, &rdataset);
-			if (rdataset.ttl > maxttl) {
-				char nbuf[DNS_NAME_FORMATSIZE];
-				char tbuf[255];
-				isc_buffer_t b;
-				isc_region_t r;
-
-				dns_name_format(name, nbuf, sizeof(nbuf));
-				isc_buffer_init(&b, tbuf, sizeof(tbuf) - 1);
-				CHECK(dns_rdatatype_totext(rdataset.type, &b));
-				isc_buffer_usedregion(&b, &r);
-				r.base[r.length] = 0;
-
-				dns_zone_log(zone, ISC_LOG_ERROR,
-					     "%s/%s TTL %d exceeds "
-					     "maximum TTL %d",
-					     nbuf, tbuf, rdataset.ttl, maxttl);
-				dns_rdataset_disassociate(&rdataset);
-				CHECK(ISC_R_RANGE);
-			}
-			dns_rdataset_disassociate(&rdataset);
-		}
-		if (result == ISC_R_NOMORE)
-			result = ISC_R_SUCCESS;
-		CHECK(result);
-
-		dns_rdatasetiter_destroy(&rdsiter);
-		dns_db_detachnode(db, &node);
-	}
-
-	if (result == ISC_R_NOMORE)
-		result = ISC_R_SUCCESS;
-
- cleanup:
-	if (node != NULL)
-		dns_db_detachnode(db, &node);
-	if (rdsiter != NULL)
-		dns_rdatasetiter_destroy(&rdsiter);
-	if (dbiter != NULL)
-		dns_dbiterator_destroy(&dbiter);
-	if (version != NULL)
-		dns_db_closeversion(db, &version, ISC_FALSE);
-	if (db != NULL)
-		dns_db_detach(&db);
-
-	return (result);
-}
-
 /*% load the zone */
 isc_result_t
 load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	  dns_masterformat_t fileformat, const char *classname,
-	  dns_ttl_t maxttl, dns_zone_t **zonep)
+	  dns_zone_t **zonep)
 {
 	isc_result_t result;
 	dns_rdataclass_t rdclass;
@@ -681,16 +597,15 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 
 	dns_zone_settype(zone, dns_zone_master);
 
-	isc_buffer_constinit(&buffer, zonename, strlen(zonename));
+	isc_buffer_init(&buffer, zonename, strlen(zonename));
 	isc_buffer_add(&buffer, strlen(zonename));
 	dns_fixedname_init(&fixorigin);
 	origin = dns_fixedname_name(&fixorigin);
-	CHECK(dns_name_fromtext(origin, &buffer, dns_rootname, 0, NULL));
+	CHECK(dns_name_fromtext(origin, &buffer, dns_rootname,
+				ISC_FALSE, NULL));
 	CHECK(dns_zone_setorigin(zone, origin));
 	CHECK(dns_zone_setdbtype(zone, 1, (const char * const *) dbtype));
 	CHECK(dns_zone_setfile2(zone, filename, fileformat));
-	if (journal != NULL)
-		CHECK(dns_zone_setjournal(zone, journal));
 
 	DE_CONST(classname, region.base);
 	region.length = strlen(classname);
@@ -698,11 +613,7 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 
 	dns_zone_setclass(zone, rdclass);
 	dns_zone_setoption(zone, zone_options, ISC_TRUE);
-	dns_zone_setoption2(zone, zone_options2, ISC_TRUE);
 	dns_zone_setoption(zone, DNS_ZONEOPT_NOMERGE, nomerge);
-
-	dns_zone_setmaxttl(zone, maxttl);
-
 	if (docheckmx)
 		dns_zone_setcheckmx(zone, checkmx);
 	if (docheckns)
@@ -711,15 +622,6 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 		dns_zone_setchecksrv(zone, checksrv);
 
 	CHECK(dns_zone_load(zone));
-
-	/*
-	 * When loading map files we can't catch oversize TTLs during
-	 * load, so we check for them here.
-	 */
-	if (fileformat == dns_masterformat_map && maxttl != 0) {
-		CHECK(check_ttls(zone, maxttl));
-	}
-
 	if (zonep != NULL) {
 		*zonep = zone;
 		zone = NULL;
@@ -734,14 +636,10 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 /*% dump the zone */
 isc_result_t
 dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
-	  dns_masterformat_t fileformat, const dns_master_style_t *style,
-	  const isc_uint32_t rawversion)
+	  dns_masterformat_t fileformat, const dns_master_style_t *style)
 {
 	isc_result_t result;
 	FILE *output = stdout;
-	const char *flags;
-
-	flags = (fileformat == dns_masterformat_text) ? "w+" : "wb+";
 
 	if (debug) {
 		if (filename != NULL && strcmp(filename, "-") != 0)
@@ -752,7 +650,7 @@ dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
 	}
 
 	if (filename != NULL && strcmp(filename, "-") != 0) {
-		result = isc_stdio_open(filename, flags, &output);
+		result = isc_stdio_open(filename, "w+", &output);
 
 		if (result != ISC_R_SUCCESS) {
 			fprintf(stderr, "could not open output "
@@ -761,8 +659,8 @@ dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
 		}
 	}
 
-	result = dns_zone_dumptostream3(zone, output, fileformat, style,
-					rawversion);
+	result = dns_zone_dumptostream2(zone, output, fileformat, style);
+
 	if (output != stdout)
 		(void)isc_stdio_close(output);
 

bin/check/check-tool.h

@@ -1,12 +1,21 @@
 /*
- * Copyright (C) 2000-2002, 2004, 2005, 2007, 2010, 2011, 2013, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004, 2005, 2007, 2010  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2000-2002  Internet Software Consortium.
  *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: check-tool.h,v 1.18 2011/12/09 23:47:02 tbox Exp $ */
+/* $Id: check-tool.h,v 1.14.334.2 2010/09/07 23:46:05 tbox Exp $ */
 
 #ifndef CHECK_TOOL_H
 #define CHECK_TOOL_H
@@ -28,12 +37,11 @@ setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp);
 isc_result_t
 load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	  dns_masterformat_t fileformat, const char *classname,
-	  dns_ttl_t maxttl, dns_zone_t **zonep);
+	  dns_zone_t **zonep);
 
 isc_result_t
 dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
-	  dns_masterformat_t fileformat, const dns_master_style_t *style,
-	  const isc_uint32_t rawversion);
+	  dns_masterformat_t fileformat, const dns_master_style_t *style);
 
 #ifdef _WIN32
 void InitSockets(void);
@@ -41,13 +49,11 @@ void DestroySockets(void);
 #endif
 
 extern int debug;
-extern const char *journal;
 extern isc_boolean_t nomerge;
 extern isc_boolean_t docheckmx;
 extern isc_boolean_t docheckns;
 extern isc_boolean_t dochecksrv;
 extern unsigned int zone_options;
-extern unsigned int zone_options2;
 
 ISC_LANG_ENDDECLS
 

bin/check/named-checkconf.8

@@ -1,135 +1,94 @@
-.\" Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2004, 2005, 2007 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2000-2002 Internet Software Consortium.
 .\" 
-.\" This Source Code Form is subject to the terms of the Mozilla Public
-.\" License, v. 2.0. If a copy of the MPL was not distributed with this
-.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
+.\" Permission to use, copy, modify, and/or distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\" 
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+.\" PERFORMANCE OF THIS SOFTWARE.
+.\"
+.\" $Id: named-checkconf.8,v 1.30.334.1 2009/07/11 01:55:20 tbox Exp $
 .\"
 .hy 0
 .ad l
-'\" t
-.\"     Title: named-checkconf
+.\"     Title: named\-checkconf
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-01-10
+.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
+.\"      Date: June 14, 2000
 .\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\"    Source: BIND9
 .\"
-.TH "NAMED\-CHECKCONF" "8" "2014\-01\-10" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
+.TH "NAMED\-CHECKCONF" "8" "June 14, 2000" "BIND9" "BIND9"
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
 .SH "NAME"
-named-checkconf \- named configuration file syntax checking tool
+named\-checkconf \- named configuration file syntax checking tool
 .SH "SYNOPSIS"
-.HP \w'\fBnamed\-checkconf\fR\ 'u
-\fBnamed\-checkconf\fR [\fB\-hjvz\fR] [\fB\-p\fR\ [\fB\-x\fR\ ]] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] {filename}
+.HP 16
+\fBnamed\-checkconf\fR [\fB\-h\fR] [\fB\-v\fR] [\fB\-j\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] {filename} [\fB\-z\fR]
 .SH "DESCRIPTION"
 .PP
 \fBnamed\-checkconf\fR
-checks the syntax, but not the semantics, of a
-\fBnamed\fR
-configuration file\&. The file is parsed and checked for syntax errors, along with all files included by it\&. If no file is specified,
-/etc/named\&.conf
-is read by default\&.
-.PP
-Note: files that
-\fBnamed\fR
-reads in separate parser contexts, such as
-rndc\&.key
-and
-bind\&.keys, are not automatically read by
-\fBnamed\-checkconf\fR\&. Configuration errors in these files may cause
-\fBnamed\fR
-to fail to run, even if
-\fBnamed\-checkconf\fR
-was successful\&.
-\fBnamed\-checkconf\fR
-can be run on these files explicitly, however\&.
+checks the syntax, but not the semantics, of a named configuration file.
 .SH "OPTIONS"
 .PP
 \-h
 .RS 4
-Print the usage summary and exit\&.
-.RE
-.PP
-\-j
-.RS 4
-When loading a zonefile read the journal if it exists\&.
-.RE
-.PP
-\-p
-.RS 4
-Print out the
-named\&.conf
-and included files in canonical form if no errors were detected\&. See also the
-\fB\-x\fR
-option\&.
+Print the usage summary and exit.
 .RE
 .PP
 \-t \fIdirectory\fR
 .RS 4
 Chroot to
-directory
-so that include directives in the configuration file are processed as if run by a similarly chrooted
-\fBnamed\fR\&.
+\fIdirectory\fR
+so that include directives in the configuration file are processed as if run by a similarly chrooted named.
 .RE
 .PP
 \-v
 .RS 4
 Print the version of the
 \fBnamed\-checkconf\fR
-program and exit\&.
-.RE
-.PP
-\-x
-.RS 4
-When printing the configuration files in canonical form, obscure shared secrets by replacing them with strings of question marks (\*(Aq?\*(Aq)\&. This allows the contents of
-named\&.conf
-and related files to be shared \(em for example, when submitting bug reports \(em without compromising private data\&. This option cannot be used without
-\fB\-p\fR\&.
+program and exit.
 .RE
 .PP
 \-z
 .RS 4
 Perform a test load of all master zones found in
-named\&.conf\&.
+\fInamed.conf\fR.
+.RE
+.PP
+\-j
+.RS 4
+When loading a zonefile read the journal if it exists.
 .RE
 .PP
 filename
 .RS 4
-The name of the configuration file to be checked\&. If not specified, it defaults to
-/etc/named\&.conf\&.
+The name of the configuration file to be checked. If not specified, it defaults to
+\fI/etc/named.conf\fR.
 .RE
 .SH "RETURN VALUES"
 .PP
 \fBnamed\-checkconf\fR
-returns an exit status of 1 if errors were detected and 0 otherwise\&.
+returns an exit status of 1 if errors were detected and 0 otherwise.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed-checkzone\fR(8),
-BIND 9 Administrator Reference Manual\&.
+\fBnamed\-checkzone\fR(8),
+BIND 9 Administrator Reference Manual.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
+Internet Systems Consortium
 .SH "COPYRIGHT"
+Copyright \(co 2004, 2005, 2007 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2000-2002, 2004, 2005, 2007, 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
+Copyright \(co 2000\-2002 Internet Software Consortium.
 .br

bin/check/named-checkconf.c

@@ -1,12 +1,21 @@
 /*
- * Copyright (C) 1999-2002, 2004-2007, 2009-2016  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004-2007, 2009, 2010  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2002  Internet Software Consortium.
  *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: named-checkconf.c,v 1.56 2011/03/12 04:59:46 tbox Exp $ */
+/* $Id: named-checkconf.c,v 1.46.222.4 2010/09/07 23:46:05 tbox Exp $ */
 
 /*! \file */
 
@@ -22,7 +31,6 @@
 #include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
-#include <isc/print.h>
 #include <isc/result.h>
 #include <isc/string.h>
 #include <isc/util.h>
@@ -31,13 +39,10 @@
 
 #include <bind9/check.h>
 
-#include <dns/db.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
 #include <dns/name.h>
-#include <dns/rdataclass.h>
 #include <dns/result.h>
-#include <dns/rootns.h>
 #include <dns/zone.h>
 
 #include "check-tool.h"
@@ -54,12 +59,9 @@ isc_log_t *logc = NULL;
 	} while (0)
 
 /*% usage */
-ISC_PLATFORM_NORETURN_PRE static void
-usage(void) ISC_PLATFORM_NORETURN_POST;
-
 static void
 usage(void) {
-	fprintf(stderr, "usage: %s [-hjvz] [-p [-x]] [-t directory] "
+	fprintf(stderr, "usage: %s [-h] [-j] [-v] [-z] [-t directory] "
 		"[named.conf]\n", program);
 	exit(1);
 }
@@ -135,27 +137,15 @@ get_checknames(const cfg_obj_t **maps, const cfg_obj_t **obj) {
 }
 
 static isc_result_t
-configure_hint(const char *zfile, const char *zclass, isc_mem_t *mctx) {
-	isc_result_t result;
-	dns_db_t *db = NULL;
-	dns_rdataclass_t rdclass;
-	isc_textregion_t r;
+config_get(const cfg_obj_t **maps, const char *name, const cfg_obj_t **obj) {
+	int i;
 
-	if (zfile == NULL)
-		return (ISC_R_FAILURE);
-
-	DE_CONST(zclass, r.base);
-	r.length = strlen(zclass);
-	result = dns_rdataclass_fromtext(&rdclass, &r);
-	if (result != ISC_R_SUCCESS)
-		return (result);
-
-	result = dns_rootns_create(mctx, rdclass, zfile, &db);
-	if (result != ISC_R_SUCCESS)
-		return (result);
-
-	dns_db_detach(&db);
-	return (ISC_R_SUCCESS);
+	for (i = 0;; i++) {
+		if (maps[i] == NULL)
+			return (ISC_R_NOTFOUND);
+		if (cfg_map_get(maps[i], name, obj) == ISC_R_SUCCESS)
+			return (ISC_R_SUCCESS);
+	}
 }
 
 /*% configure the zone */
@@ -168,20 +158,16 @@ configure_zone(const char *vclass, const char *view,
 	isc_result_t result;
 	const char *zclass;
 	const char *zname;
-	const char *zfile = NULL;
+	const char *zfile;
 	const cfg_obj_t *maps[4];
-	const cfg_obj_t *mastersobj = NULL;
-	const cfg_obj_t *inviewobj = NULL;
 	const cfg_obj_t *zoptions = NULL;
 	const cfg_obj_t *classobj = NULL;
 	const cfg_obj_t *typeobj = NULL;
 	const cfg_obj_t *fileobj = NULL;
-	const cfg_obj_t *dlzobj = NULL;
 	const cfg_obj_t *dbobj = NULL;
 	const cfg_obj_t *obj = NULL;
 	const cfg_obj_t *fmtobj = NULL;
 	dns_masterformat_t masterformat;
-	dns_ttl_t maxttl = 0;
 
 	zone_options = DNS_ZONEOPT_CHECKNS | DNS_ZONEOPT_MANYERRORS;
 
@@ -201,73 +187,20 @@ configure_zone(const char *vclass, const char *view,
 		if (obj != NULL)
 			maps[i++] = obj;
 	}
-	maps[i] = NULL;
-
-	cfg_map_get(zoptions, "in-view", &inviewobj);
-	if (inviewobj != NULL)
-		return (ISC_R_SUCCESS);
+	maps[i++] = NULL;
 
 	cfg_map_get(zoptions, "type", &typeobj);
 	if (typeobj == NULL)
 		return (ISC_R_FAILURE);
-
-	/*
-	 * Skip checks when using an alternate data source.
-	 */
+	if (strcasecmp(cfg_obj_asstring(typeobj), "master") != 0)
+		return (ISC_R_SUCCESS);
 	cfg_map_get(zoptions, "database", &dbobj);
-	if (dbobj != NULL &&
-	    strcmp("rbt", cfg_obj_asstring(dbobj)) != 0 &&
-	    strcmp("rbt64", cfg_obj_asstring(dbobj)) != 0)
+	if (dbobj != NULL)
 		return (ISC_R_SUCCESS);
-
-	cfg_map_get(zoptions, "dlz", &dlzobj);
-	if (dlzobj != NULL)
-		return (ISC_R_SUCCESS);
-
 	cfg_map_get(zoptions, "file", &fileobj);
-	if (fileobj != NULL)
-		zfile = cfg_obj_asstring(fileobj);
-
-	/*
-	 * Check hints files for hint zones.
-	 * Skip loading checks for any type other than
-	 * master and redirect
-	 */
-	if (strcasecmp(cfg_obj_asstring(typeobj), "hint") == 0)
-		return (configure_hint(zfile, zclass, mctx));
-	else if ((strcasecmp(cfg_obj_asstring(typeobj), "master") != 0) &&
-		  (strcasecmp(cfg_obj_asstring(typeobj), "redirect") != 0))
-		return (ISC_R_SUCCESS);
-
-	/*
-	 * Is the redirect zone configured as a slave?
-	 */
-	if (strcasecmp(cfg_obj_asstring(typeobj), "redirect") == 0) {
-		cfg_map_get(zoptions, "masters", &mastersobj);
-		if (mastersobj != NULL)
-			return (ISC_R_SUCCESS);
-	}
-
-	if (zfile == NULL)
+	if (fileobj == NULL)
 		return (ISC_R_FAILURE);
-
-	obj = NULL;
-	if (get_maps(maps, "check-dup-records", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-			zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "fail") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-			zone_options |= DNS_ZONEOPT_CHECKDUPRRFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options &= ~DNS_ZONEOPT_CHECKDUPRR;
-			zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-		zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-	}
+	zfile = cfg_obj_asstring(fileobj);
 
 	obj = NULL;
 	if (get_maps(maps, "check-mx", &obj)) {
@@ -340,18 +273,6 @@ configure_zone(const char *vclass, const char *view,
 			zone_options &= ~DNS_ZONEOPT_CHECKSIBLING;
 	}
 
-	obj = NULL;
-	if (get_maps(maps, "check-spf", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKSPF;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options &= ~DNS_ZONEOPT_CHECKSPF;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_CHECKSPF;
-	}
-
 	obj = NULL;
 	if (get_checknames(maps, &obj)) {
 		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
@@ -372,30 +293,22 @@ configure_zone(const char *vclass, const char *view,
 
 	masterformat = dns_masterformat_text;
 	fmtobj = NULL;
-	if (get_maps(maps, "masterfile-format", &fmtobj)) {
+	result = config_get(maps, "masterfile-format", &fmtobj);
+	if (result == ISC_R_SUCCESS) {
 		const char *masterformatstr = cfg_obj_asstring(fmtobj);
 		if (strcasecmp(masterformatstr, "text") == 0)
 			masterformat = dns_masterformat_text;
 		else if (strcasecmp(masterformatstr, "raw") == 0)
 			masterformat = dns_masterformat_raw;
-		else if (strcasecmp(masterformatstr, "map") == 0)
-			masterformat = dns_masterformat_map;
 		else
 			INSIST(0);
 	}
 
-	obj = NULL;
-	if (get_maps(maps, "max-zone-ttl", &obj)) {
-		maxttl = cfg_obj_asuint32(obj);
-		zone_options2 |= DNS_ZONEOPT2_CHECKTTL;
-	}
-
-	result = load_zone(mctx, zname, zfile, masterformat,
-			   zclass, maxttl, NULL);
+	result = load_zone(mctx, zname, zfile, masterformat, zclass, NULL);
 	if (result != ISC_R_SUCCESS)
 		fprintf(stderr, "%s/%s/%s: %s\n", view, zname, zclass,
 			dns_result_totext(result));
-	return (result);
+	return(result);
 }
 
 /*% configure a view */
@@ -432,27 +345,15 @@ configure_view(const char *vclass, const char *view, const cfg_obj_t *config,
 	return (result);
 }
 
-static isc_result_t
-config_getclass(const cfg_obj_t *classobj, dns_rdataclass_t defclass,
-		dns_rdataclass_t *classp)
-{
-	isc_textregion_t r;
-
-	if (!cfg_obj_isstring(classobj)) {
-		*classp = defclass;
-		return (ISC_R_SUCCESS);
-	}
-	DE_CONST(cfg_obj_asstring(classobj), r.base);
-	r.length = strlen(r.base);
-	return (dns_rdataclass_fromtext(classp, &r));
-}
 
 /*% load zones from the configuration */
 static isc_result_t
 load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 	const cfg_listelt_t *element;
+	const cfg_obj_t *classobj;
 	const cfg_obj_t *views;
 	const cfg_obj_t *vconfig;
+	const char *vclass;
 	isc_result_t result = ISC_R_SUCCESS;
 	isc_result_t tresult;
 
@@ -463,24 +364,17 @@ load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 	     element != NULL;
 	     element = cfg_list_next(element))
 	{
-		const cfg_obj_t *classobj;
-		dns_rdataclass_t viewclass;
 		const char *vname;
-		char buf[sizeof("CLASS65535")];
 
+		vclass = "IN";
 		vconfig = cfg_listelt_value(element);
-		if (vconfig == NULL)
-			continue;
-
-		classobj = cfg_tuple_get(vconfig, "class");
-		CHECK(config_getclass(classobj, dns_rdataclass_in,
-					 &viewclass));
-		if (dns_rdataclass_ismeta(viewclass))
-			CHECK(ISC_R_FAILURE);
-
-		dns_rdataclass_format(viewclass, buf, sizeof(buf));
+		if (vconfig != NULL) {
+			classobj = cfg_tuple_get(vconfig, "class");
+			if (cfg_obj_isstring(classobj))
+				vclass = cfg_obj_asstring(classobj);
+		}
 		vname = cfg_obj_asstring(cfg_tuple_get(vconfig, "name"));
-		tresult = configure_view(buf, vname, config, vconfig, mctx);
+		tresult = configure_view(vclass, vname, config, vconfig, mctx);
 		if (tresult != ISC_R_SUCCESS)
 			result = tresult;
 	}
@@ -490,20 +384,9 @@ load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 		if (tresult != ISC_R_SUCCESS)
 			result = tresult;
 	}
-
-cleanup:
 	return (result);
 }
 
-static void
-output(void *closure, const char *text, int textlen) {
-	UNUSED(closure);
-	if (fwrite(text, 1, textlen, stdout) != (size_t)textlen) {
-		perror("fwrite");
-		exit(1);
-	}
-}
-
 /*% The main processing routine */
 int
 main(int argc, char **argv) {
@@ -516,38 +399,10 @@ main(int argc, char **argv) {
 	int exit_status = 0;
 	isc_entropy_t *ectx = NULL;
 	isc_boolean_t load_zones = ISC_FALSE;
-	isc_boolean_t print = ISC_FALSE;
-	unsigned int flags = 0;
 
 	isc_commandline_errprint = ISC_FALSE;
 
-	/*
-	 * Process memory debugging argument first.
-	 */
-#define CMDLINE_FLAGS "dhjm:t:pvxz"
-	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != -1) {
-		switch (c) {
-		case 'm':
-			if (strcasecmp(isc_commandline_argument, "record") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGRECORD;
-			if (strcasecmp(isc_commandline_argument, "trace") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGTRACE;
-			if (strcasecmp(isc_commandline_argument, "usage") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGUSAGE;
-			if (strcasecmp(isc_commandline_argument, "size") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGSIZE;
-			if (strcasecmp(isc_commandline_argument, "mctx") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGCTX;
-			break;
-		default:
-			break;
-		}
-	}
-	isc_commandline_reset = ISC_TRUE;
-
-	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
-
-	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != EOF) {
+	while ((c = isc_commandline_parse(argc, argv, "dhjt:vz")) != EOF) {
 		switch (c) {
 		case 'd':
 			debug++;
@@ -557,9 +412,6 @@ main(int argc, char **argv) {
 			nomerge = ISC_FALSE;
 			break;
 
-		case 'm':
-			break;
-
 		case 't':
 			result = isc_dir_chroot(isc_commandline_argument);
 			if (result != ISC_R_SUCCESS) {
@@ -569,18 +421,10 @@ main(int argc, char **argv) {
 			}
 			break;
 
-		case 'p':
-			print = ISC_TRUE;
-			break;
-
 		case 'v':
 			printf(VERSION "\n");
 			exit(0);
 
-		case 'x':
-			flags |= CFG_PRINTER_XKEY;
-			break;
-
 		case 'z':
 			load_zones = ISC_TRUE;
 			docheckmx = ISC_FALSE;
@@ -592,7 +436,6 @@ main(int argc, char **argv) {
 			if (isc_commandline_option != '?')
 				fprintf(stderr, "%s: invalid argument -%c\n",
 					program, isc_commandline_option);
-			/* FALLTHROUGH */
 		case 'h':
 			usage();
 
@@ -603,11 +446,6 @@ main(int argc, char **argv) {
 		}
 	}
 
-	if (((flags & CFG_PRINTER_XKEY) != 0) && !print) {
-		fprintf(stderr, "%s: -x cannot be used without -p\n", program);
-		exit(1);
-	}
-
 	if (isc_commandline_index + 1 < argc)
 		usage();
 	if (argv[isc_commandline_index] != NULL)
@@ -619,6 +457,8 @@ main(int argc, char **argv) {
 	InitSockets();
 #endif
 
+	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
+
 	RUNTIME_CHECK(setup_logging(mctx, stdout, &logc) == ISC_R_SUCCESS);
 
 	RUNTIME_CHECK(isc_entropy_create(mctx, &ectx) == ISC_R_SUCCESS);
@@ -645,8 +485,6 @@ main(int argc, char **argv) {
 			exit_status = 1;
 	}
 
-	if (print && exit_status == 0)
-		cfg_printx(config, flags, output, NULL);
 	cfg_obj_destroy(parser, &config);
 
 	cfg_parser_destroy(&parser);

bin/check/named-checkconf.docbook

@@ -1,21 +1,27 @@
-<!DOCTYPE book [
-<!ENTITY mdash "&#8212;">]>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004, 2005, 2007  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002  Internet Software Consortium.
  -
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ - Permission to use, copy, modify, and/or distribute this software for any
+ - purpose with or without fee is hereby granted, provided that the above
+ - copyright notice and this permission notice appear in all copies.
+ -
+ - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkconf">
-  <info>
-    <date>2014-01-10</date>
-  </info>
+<!-- $Id: named-checkconf.docbook,v 1.19 2007/06/19 06:58:03 marka Exp $ -->
+<refentry id="man.named-checkconf">
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>June 14, 2000</date>
   </refentryinfo>
 
   <refmeta>
@@ -26,18 +32,17 @@
 
   <docinfo>
     <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
       <year>2004</year>
       <year>2005</year>
       <year>2007</year>
-      <year>2009</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
+    <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
+      <holder>Internet Software Consortium.</holder>
+    </copyright>
   </docinfo>
 
   <refnamediv>
@@ -46,39 +51,27 @@
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-checkconf</command>
-      <arg choice="opt" rep="norepeat"><option>-hjvz</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-p</option>
-	<arg choice="opt" rep="norepeat"><option>-x</option>
-      </arg></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-h</option></arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-j</option></arg>
+      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="req">filename</arg>
+      <arg><option>-z</option></arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
+  <refsect1>
+    <title>DESCRIPTION</title>
     <para><command>named-checkconf</command>
-      checks the syntax, but not the semantics, of a
-      <command>named</command> configuration file.  The file is parsed
-      and checked for syntax errors, along with all files included by it.
-      If no file is specified, <filename>/etc/named.conf</filename> is read
-      by default.
+      checks the syntax, but not the semantics, of a named
+      configuration file.
     </para>
-    <para>
-      Note: files that <command>named</command> reads in separate
-      parser contexts, such as <filename>rndc.key</filename> and
-      <filename>bind.keys</filename>, are not automatically read
-      by <command>named-checkconf</command>.  Configuration
-      errors in these files may cause <command>named</command> to
-      fail to run, even if <command>named-checkconf</command> was
-      successful.  <command>named-checkconf</command> can be run
-      on these files explicitly, however.
-    </para>
-  </refsection>
+  </refsect1>
 
-  <refsection><info><title>OPTIONS</title></info>
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -90,33 +83,14 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term>-j</term>
-        <listitem>
-          <para>
-            When loading a zonefile read the journal if it exists.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-p</term>
-        <listitem>
-          <para>
-	    Print out the <filename>named.conf</filename> and included files
-	    in canonical form if no errors were detected.
-            See also the <option>-x</option> option.
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-t <replaceable class="parameter">directory</replaceable></term>
         <listitem>
           <para>
-            Chroot to <filename>directory</filename> so that include
+            Chroot to <filename>directory</filename> so that
+            include
             directives in the configuration file are processed as if
-            run by a similarly chrooted <command>named</command>.
+            run by a similarly chrooted named.
           </para>
         </listitem>
       </varlistentry>
@@ -131,21 +105,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term>-x</term>
-        <listitem>
-          <para>
-	    When printing the configuration files in canonical
-            form, obscure shared secrets by replacing them with
-            strings of question marks ('?'). This allows the
-            contents of <filename>named.conf</filename> and related
-            files to be shared &mdash; for example, when submitting
-            bug reports &mdash; without compromising private data.
-            This option cannot be used without <option>-p</option>.
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-z</term>
         <listitem>
@@ -156,6 +115,15 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term>-j</term>
+        <listitem>
+          <para>
+            When loading a zonefile read the journal if it exists.
+          </para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term>filename</term>
         <listitem>
@@ -168,18 +136,18 @@
 
     </variablelist>
 
-  </refsection>
-
-  <refsection><info><title>RETURN VALUES</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>RETURN VALUES</title>
     <para><command>named-checkconf</command>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
@@ -188,5 +156,16 @@
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
-</refentry>
+  </refsect1>
+
+  <refsect1>
+    <title>AUTHOR</title>
+    <para><corpauthor>Internet Systems Consortium</corpauthor>
+    </para>
+  </refsect1>
+
+</refentry><!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->

bin/check/named-checkconf.html

@@ -1,158 +1,96 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004, 2005, 2007 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002 Internet Software Consortium.
  - 
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ - Permission to use, copy, modify, and/or distribute this software for any
+ - purpose with or without fee is hereby granted, provided that the above
+ - copyright notice and this permission notice appear in all copies.
+ - 
+ - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ - PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
+<!-- $Id: named-checkconf.html,v 1.30.334.1 2009/07/11 01:55:20 tbox Exp $ -->
+<html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>named-checkconf</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
 <a name="man.named-checkconf"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  
-
-  <div class="refnamediv">
+<div class="refnamediv">
 <h2>Name</h2>
-<p>
-    <span class="application">named-checkconf</span>
-     &#8212; named configuration file syntax checking tool
-  </p>
+<p><span class="application">named-checkconf</span> &#8212; named configuration file syntax checking tool</p>
 </div>
-
-  <div class="refsynopsisdiv">
+<div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-checkconf</code> 
-       [<code class="option">-hjvz</code>]
-       [<code class="option">-p</code>
-	 [<code class="option">-x</code>
-      ]]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       {filename}
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>named-checkconf</strong></span>
-      checks the syntax, but not the semantics, of a
-      <span class="command"><strong>named</strong></span> configuration file.  The file is parsed
-      and checked for syntax errors, along with all files included by it.
-      If no file is specified, <code class="filename">/etc/named.conf</code> is read
-      by default.
+<div class="cmdsynopsis"><p><code class="command">named-checkconf</code>  [<code class="option">-h</code>] [<code class="option">-v</code>] [<code class="option">-j</code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] {filename} [<code class="option">-z</code>]</p></div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543387"></a><h2>DESCRIPTION</h2>
+<p><span><strong class="command">named-checkconf</strong></span>
+      checks the syntax, but not the semantics, of a named
+      configuration file.
     </p>
-    <p>
-      Note: files that <span class="command"><strong>named</strong></span> reads in separate
-      parser contexts, such as <code class="filename">rndc.key</code> and
-      <code class="filename">bind.keys</code>, are not automatically read
-      by <span class="command"><strong>named-checkconf</strong></span>.  Configuration
-      errors in these files may cause <span class="command"><strong>named</strong></span> to
-      fail to run, even if <span class="command"><strong>named-checkconf</strong></span> was
-      successful.  <span class="command"><strong>named-checkconf</strong></span> can be run
-      on these files explicitly, however.
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-    <div class="variablelist"><dl class="variablelist">
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543399"></a><h2>OPTIONS</h2>
+<div class="variablelist"><dl>
 <dt><span class="term">-h</span></dt>
-<dd>
-          <p>
+<dd><p>
             Print the usage summary and exit.
-          </p>
-        </dd>
-<dt><span class="term">-j</span></dt>
-<dd>
-          <p>
-            When loading a zonefile read the journal if it exists.
-          </p>
-        </dd>
-<dt><span class="term">-p</span></dt>
-<dd>
-          <p>
-	    Print out the <code class="filename">named.conf</code> and included files
-	    in canonical form if no errors were detected.
-            See also the <code class="option">-x</code> option.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
-            Chroot to <code class="filename">directory</code> so that include
+<dd><p>
+            Chroot to <code class="filename">directory</code> so that
+            include
             directives in the configuration file are processed as if
-            run by a similarly chrooted <span class="command"><strong>named</strong></span>.
-          </p>
-        </dd>
+            run by a similarly chrooted named.
+          </p></dd>
 <dt><span class="term">-v</span></dt>
-<dd>
-          <p>
-            Print the version of the <span class="command"><strong>named-checkconf</strong></span>
+<dd><p>
+            Print the version of the <span><strong class="command">named-checkconf</strong></span>
             program and exit.
-          </p>
-        </dd>
-<dt><span class="term">-x</span></dt>
-<dd>
-          <p>
-	    When printing the configuration files in canonical
-            form, obscure shared secrets by replacing them with
-            strings of question marks ('?'). This allows the
-            contents of <code class="filename">named.conf</code> and related
-            files to be shared &#8212; for example, when submitting
-            bug reports &#8212; without compromising private data.
-            This option cannot be used without <code class="option">-p</code>.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-z</span></dt>
-<dd>
-          <p>
+<dd><p>
 	    Perform a test load of all master zones found in
 	    <code class="filename">named.conf</code>.
-          </p>
-        </dd>
+          </p></dd>
+<dt><span class="term">-j</span></dt>
+<dd><p>
+            When loading a zonefile read the journal if it exists.
+          </p></dd>
 <dt><span class="term">filename</span></dt>
-<dd>
-          <p>
+<dd><p>
             The name of the configuration file to be checked.  If not
             specified, it defaults to <code class="filename">/etc/named.conf</code>.
-          </p>
-        </dd>
+          </p></dd>
 </dl></div>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>RETURN VALUES</h2>
-
-    <p><span class="command"><strong>named-checkconf</strong></span>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543507"></a><h2>RETURN VALUES</h2>
+<p><span><strong class="command">named-checkconf</strong></span>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named-checkzone</span>(8)
-      </span>,
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543518"></a><h2>SEE ALSO</h2>
+<p><span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
+      <span class="citerefentry"><span class="refentrytitle">named-checkzone</span>(8)</span>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-  </div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543548"></a><h2>AUTHOR</h2>
+<p><span class="corpauthor">Internet Systems Consortium</span>
+    </p>
+</div>
 </div></body>
 </html>

bin/check/named-checkzone.8

@@ -1,130 +1,118 @@
-.\" Copyright (C) 2000-2002, 2004-2007, 2009-2016 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2004-2007, 2009 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2000-2002 Internet Software Consortium.
 .\" 
-.\" This Source Code Form is subject to the terms of the Mozilla Public
-.\" License, v. 2.0. If a copy of the MPL was not distributed with this
-.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
+.\" Permission to use, copy, modify, and/or distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\" 
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+.\" PERFORMANCE OF THIS SOFTWARE.
+.\"
+.\" $Id: named-checkzone.8,v 1.42.334.3 2009/11/11 01:56:22 tbox Exp $
 .\"
 .hy 0
 .ad l
-'\" t
-.\"     Title: named-checkzone
+.\"     Title: named\-checkzone
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-02-19
+.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
+.\"      Date: June 13, 2000
 .\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\"    Source: BIND9
 .\"
-.TH "NAMED\-CHECKZONE" "8" "2014\-02\-19" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
+.TH "NAMED\-CHECKZONE" "8" "June 13, 2000" "BIND9" "BIND9"
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
 .SH "NAME"
-named-checkzone, named-compilezone \- zone file validity checking or converting tool
+named\-checkzone, named\-compilezone \- zone file validity checking or converting tool
 .SH "SYNOPSIS"
-.HP \w'\fBnamed\-checkzone\fR\ 'u
-\fBnamed\-checkzone\fR [\fB\-d\fR] [\fB\-h\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-J\ \fR\fB\fIfilename\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-M\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-l\ \fR\fB\fIttl\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-o\ \fR\fB\fIfilename\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-S\ \fR\fB\fImode\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {zonename} {filename}
-.HP \w'\fBnamed\-compilezone\fR\ 'u
-\fBnamed\-compilezone\fR [\fB\-d\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-C\ \fR\fB\fImode\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-J\ \fR\fB\fIfilename\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-l\ \fR\fB\fIttl\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {\fB\-o\ \fR\fB\fIfilename\fR\fR} {zonename} {filename}
+.HP 16
+\fBnamed\-checkzone\fR [\fB\-d\fR] [\fB\-h\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-M\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-S\ \fR\fB\fImode\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {zonename} {filename}
+.HP 18
+\fBnamed\-compilezone\fR [\fB\-d\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-C\ \fR\fB\fImode\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-o\ \fR\fB\fIfilename\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {\fB\-o\ \fR\fB\fIfilename\fR\fR} {zonename} {filename}
 .SH "DESCRIPTION"
 .PP
 \fBnamed\-checkzone\fR
-checks the syntax and integrity of a zone file\&. It performs the same checks as
+checks the syntax and integrity of a zone file. It performs the same checks as
 \fBnamed\fR
-does when loading a zone\&. This makes
+does when loading a zone. This makes
 \fBnamed\-checkzone\fR
-useful for checking zone files before configuring them into a name server\&.
+useful for checking zone files before configuring them into a name server.
 .PP
 \fBnamed\-compilezone\fR
 is similar to
-\fBnamed\-checkzone\fR, but it always dumps the zone contents to a specified file in a specified format\&. Additionally, it applies stricter check levels by default, since the dump output will be used as an actual zone file loaded by
-\fBnamed\fR\&. When manually specified otherwise, the check levels must at least be as strict as those specified in the
+\fBnamed\-checkzone\fR, but it always dumps the zone contents to a specified file in a specified format. Additionally, it applies stricter check levels by default, since the dump output will be used as an actual zone file loaded by
+\fBnamed\fR. When manually specified otherwise, the check levels must at least be as strict as those specified in the
 \fBnamed\fR
-configuration file\&.
+configuration file.
 .SH "OPTIONS"
 .PP
 \-d
 .RS 4
-Enable debugging\&.
+Enable debugging.
 .RE
 .PP
 \-h
 .RS 4
-Print the usage summary and exit\&.
+Print the usage summary and exit.
 .RE
 .PP
 \-q
 .RS 4
-Quiet mode \- exit code only\&.
+Quiet mode \- exit code only.
 .RE
 .PP
 \-v
 .RS 4
 Print the version of the
 \fBnamed\-checkzone\fR
-program and exit\&.
+program and exit.
 .RE
 .PP
 \-j
 .RS 4
-When loading a zone file, read the journal if it exists\&. The journal file name is assumed to be the zone file name appended with the string
-\&.jnl\&.
-.RE
-.PP
-\-J \fIfilename\fR
-.RS 4
-When loading the zone file read the journal from the given file, if it exists\&. (Implies \-j\&.)
+When loading the zone file read the journal if it exists.
 .RE
 .PP
 \-c \fIclass\fR
 .RS 4
-Specify the class of the zone\&. If not specified, "IN" is assumed\&.
+Specify the class of the zone. If not specified, "IN" is assumed.
 .RE
 .PP
 \-i \fImode\fR
 .RS 4
-Perform post\-load zone integrity checks\&. Possible modes are
+Perform post\-load zone integrity checks. Possible modes are
 \fB"full"\fR
 (default),
 \fB"full\-sibling"\fR,
 \fB"local"\fR,
 \fB"local\-sibling"\fR
 and
-\fB"none"\fR\&.
+\fB"none"\fR.
 .sp
 Mode
 \fB"full"\fR
-checks that MX records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
+checks that MX records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). Mode
 \fB"local"\fR
-only checks MX records which refer to in\-zone hostnames\&.
+only checks MX records which refer to in\-zone hostnames.
 .sp
 Mode
 \fB"full"\fR
-checks that SRV records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
+checks that SRV records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). Mode
 \fB"local"\fR
-only checks SRV records which refer to in\-zone hostnames\&.
+only checks SRV records which refer to in\-zone hostnames.
 .sp
 Mode
 \fB"full"\fR
-checks that delegation NS records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. It also checks that glue address records in the zone match those advertised by the child\&. Mode
+checks that delegation NS records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). It also checks that glue address records in the zone match those advertised by the child. Mode
 \fB"local"\fR
-only checks NS records which refer to in\-zone hostnames or that some required glue exists, that is when the nameserver is in a child zone\&.
+only checks NS records which refer to in\-zone hostnames or that some required glue exists, that is when the nameserver is in a child zone.
 .sp
 Mode
 \fB"full\-sibling"\fR
@@ -134,196 +122,157 @@ disable sibling glue checks but are otherwise the same as
 \fB"full"\fR
 and
 \fB"local"\fR
-respectively\&.
+respectively.
 .sp
 Mode
 \fB"none"\fR
-disables the checks\&.
+disables the checks.
 .RE
 .PP
 \-f \fIformat\fR
 .RS 4
-Specify the format of the zone file\&. Possible formats are
+Specify the format of the zone file. Possible formats are
 \fB"text"\fR
-(default),
-\fB"raw"\fR, and
-\fB"map"\fR\&.
+(default) and
+\fB"raw"\fR.
 .RE
 .PP
 \-F \fIformat\fR
 .RS 4
-Specify the format of the output file specified\&. For
-\fBnamed\-checkzone\fR, this does not cause any effects unless it dumps the zone contents\&.
-.sp
-Possible formats are
+Specify the format of the output file specified. Possible formats are
 \fB"text"\fR
-(default), which is the standard textual representation of the zone, and
-\fB"map"\fR,
-\fB"raw"\fR, and
-\fB"raw=N"\fR, which store the zone in a binary format for rapid loading by
-\fBnamed\fR\&.
-\fB"raw=N"\fR
-specifies the format version of the raw zone file: if N is 0, the raw file can be read by any version of
-\fBnamed\fR; if N is 1, the file can be read by release 9\&.9\&.0 or higher; the default is 1\&.
+(default) and
+\fB"raw"\fR. For
+\fBnamed\-checkzone\fR, this does not cause any effects unless it dumps the zone contents.
 .RE
 .PP
 \-k \fImode\fR
 .RS 4
 Perform
 \fB"check\-names"\fR
-checks with the specified failure mode\&. Possible modes are
+checks with the specified failure mode. Possible modes are
 \fB"fail"\fR
 (default for
 \fBnamed\-compilezone\fR),
 \fB"warn"\fR
 (default for
 \fBnamed\-checkzone\fR) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-l \fIttl\fR
-.RS 4
-Sets a maximum permissible TTL for the input file\&. Any record with a TTL higher than this value will cause the zone to be rejected\&. This is similar to using the
-\fBmax\-zone\-ttl\fR
-option in
-named\&.conf\&.
-.RE
-.PP
-\-L \fIserial\fR
-.RS 4
-When compiling a zone to "raw" or "map" format, set the "source serial" value in the header to the specified serial number\&. (This is expected to be used primarily for testing purposes\&.)
+\fB"ignore"\fR.
 .RE
 .PP
 \-m \fImode\fR
 .RS 4
-Specify whether MX records should be checked to see if they are addresses\&. Possible modes are
+Specify whether MX records should be checked to see if they are addresses. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-M \fImode\fR
 .RS 4
-Check if a MX record refers to a CNAME\&. Possible modes are
+Check if a MX record refers to a CNAME. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-n \fImode\fR
 .RS 4
-Specify whether NS records should be checked to see if they are addresses\&. Possible modes are
+Specify whether NS records should be checked to see if they are addresses. Possible modes are
 \fB"fail"\fR
 (default for
 \fBnamed\-compilezone\fR),
 \fB"warn"\fR
 (default for
 \fBnamed\-checkzone\fR) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-o \fIfilename\fR
 .RS 4
 Write zone output to
-filename\&. If
-filename
+\fIfilename\fR. If
+\fIfilename\fR
 is
-\-
-then write to standard out\&. This is mandatory for
-\fBnamed\-compilezone\fR\&.
-.RE
-.PP
-\-r \fImode\fR
-.RS 4
-Check for records that are treated as different by DNSSEC but are semantically equal in plain DNS\&. Possible modes are
-\fB"fail"\fR,
-\fB"warn"\fR
-(default) and
-\fB"ignore"\fR\&.
+\fI\-\fR
+then write to standard out. This is mandatory for
+\fBnamed\-compilezone\fR.
 .RE
 .PP
 \-s \fIstyle\fR
 .RS 4
-Specify the style of the dumped zone file\&. Possible styles are
+Specify the style of the dumped zone file. Possible styles are
 \fB"full"\fR
 (default) and
-\fB"relative"\fR\&. The full format is most suitable for processing automatically by a separate script\&. On the other hand, the relative format is more human\-readable and is thus suitable for editing by hand\&. For
+\fB"relative"\fR. The full format is most suitable for processing automatically by a separate script. On the other hand, the relative format is more human\-readable and is thus suitable for editing by hand. For
 \fBnamed\-checkzone\fR
-this does not cause any effects unless it dumps the zone contents\&. It also does not have any meaning if the output format is not text\&.
+this does not cause any effects unless it dumps the zone contents. It also does not have any meaning if the output format is not text.
 .RE
 .PP
 \-S \fImode\fR
 .RS 4
-Check if a SRV record refers to a CNAME\&. Possible modes are
+Check if a SRV record refers to a CNAME. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-t \fIdirectory\fR
 .RS 4
 Chroot to
-directory
-so that include directives in the configuration file are processed as if run by a similarly chrooted
-\fBnamed\fR\&.
-.RE
-.PP
-\-T \fImode\fR
-.RS 4
-Check if Sender Policy Framework (SPF) records exist and issues a warning if an SPF\-formatted TXT record is not also present\&. Possible modes are
-\fB"warn"\fR
-(default),
-\fB"ignore"\fR\&.
+\fIdirectory\fR
+so that include directives in the configuration file are processed as if run by a similarly chrooted named.
 .RE
 .PP
 \-w \fIdirectory\fR
 .RS 4
 chdir to
-directory
-so that relative filenames in master file $INCLUDE directives work\&. This is similar to the directory clause in
-named\&.conf\&.
+\fIdirectory\fR
+so that relative filenames in master file $INCLUDE directives work. This is similar to the directory clause in
+\fInamed.conf\fR.
 .RE
 .PP
 \-D
 .RS 4
-Dump zone file in canonical format\&. This is always enabled for
-\fBnamed\-compilezone\fR\&.
+Dump zone file in canonical format. This is always enabled for
+\fBnamed\-compilezone\fR.
 .RE
 .PP
 \-W \fImode\fR
 .RS 4
-Specify whether to check for non\-terminal wildcards\&. Non\-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (RFC 1034)\&. Possible modes are
+Specify whether to check for non\-terminal wildcards. Non\-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (RFC 1034). Possible modes are
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 zonename
 .RS 4
-The domain name of the zone being checked\&.
+The domain name of the zone being checked.
 .RE
 .PP
 filename
 .RS 4
-The name of the zone file\&.
+The name of the zone file.
 .RE
 .SH "RETURN VALUES"
 .PP
 \fBnamed\-checkzone\fR
-returns an exit status of 1 if errors were detected and 0 otherwise\&.
+returns an exit status of 1 if errors were detected and 0 otherwise.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed-checkconf\fR(8),
+\fBnamed\-checkconf\fR(8),
 RFC 1035,
-BIND 9 Administrator Reference Manual\&.
+BIND 9 Administrator Reference Manual.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
+Internet Systems Consortium
 .SH "COPYRIGHT"
+Copyright \(co 2004\-2007, 2009 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2000-2002, 2004-2007, 2009-2016 Internet Systems Consortium, Inc. ("ISC")
+Copyright \(co 2000\-2002 Internet Software Consortium.
 .br

bin/check/named-checkzone.c

@@ -1,12 +1,21 @@
 /*
- * Copyright (C) 1999-2016  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2003  Internet Software Consortium.
  *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: named-checkzone.c,v 1.65.32.2 2012/02/07 02:45:21 each Exp $ */
+/* $Id: named-checkzone.c,v 1.51.34.6 2010/09/07 23:46:06 tbox Exp $ */
 
 /*! \file */
 
@@ -21,7 +30,6 @@
 #include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
-#include <isc/print.h>
 #include <isc/socket.h>
 #include <isc/string.h>
 #include <isc/task.h>
@@ -31,7 +39,6 @@
 #include <dns/db.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
-#include <dns/master.h>
 #include <dns/masterdump.h>
 #include <dns/name.h>
 #include <dns/rdataclass.h>
@@ -49,7 +56,7 @@ dns_zone_t *zone = NULL;
 dns_zonetype_t zonetype = dns_zone_master;
 static int dumpzone = 0;
 static const char *output_filename;
-static const char *prog_name = NULL;
+static char *prog_name = NULL;
 static const dns_master_style_t *outputstyle = NULL;
 static enum { progmode_check, progmode_compile } progmode;
 
@@ -63,23 +70,19 @@ static enum { progmode_check, progmode_compile } progmode;
 		} \
 	} while (0)
 
-ISC_PLATFORM_NORETURN_PRE static void
-usage(void) ISC_PLATFORM_NORETURN_POST;
-
 static void
 usage(void) {
 	fprintf(stderr,
 		"usage: %s [-djqvD] [-c class] "
-		"[-f inputformat] [-F outputformat] [-J filename] "
+		"[-f inputformat] [-F outputformat] "
 		"[-t directory] [-w directory] [-k (ignore|warn|fail)] "
 		"[-n (ignore|warn|fail)] [-m (ignore|warn|fail)] "
-		"[-r (ignore|warn|fail)] "
 		"[-i (full|full-sibling|local|local-sibling|none)] "
 		"[-M (ignore|warn|fail)] [-S (ignore|warn|fail)] "
 		"[-W (ignore|warn)] "
 		"%s zonename filename\n",
 		prog_name,
-		progmode == progmode_check ? "[-o filename]" : "-o filename");
+		progmode == progmode_check ? "[-o filename]" : "{-o filename}");
 	exit(1);
 }
 
@@ -105,18 +108,7 @@ main(int argc, char **argv) {
 	const char *outputformatstr = NULL;
 	dns_masterformat_t inputformat = dns_masterformat_text;
 	dns_masterformat_t outputformat = dns_masterformat_text;
-	dns_masterrawheader_t header;
-	isc_uint32_t rawversion = 1, serialnum = 0;
-	dns_ttl_t maxttl = 0;
-	isc_boolean_t snset = ISC_FALSE;
-	isc_boolean_t logdump = ISC_FALSE;
 	FILE *errout = stdout;
-	char *endp;
-
-	/*
-	 * Uncomment the following line if memory debugging is needed:
-	 * isc_mem_debugging |= ISC_MEM_DEBUGRECORD;
-	 */
 
 	outputstyle = &dns_master_style_full;
 
@@ -148,21 +140,17 @@ main(int argc, char **argv) {
 	if (progmode == progmode_compile) {
 		zone_options |= (DNS_ZONEOPT_CHECKNS |
 				 DNS_ZONEOPT_FATALNS |
-				 DNS_ZONEOPT_CHECKSPF |
-				 DNS_ZONEOPT_CHECKDUPRR |
 				 DNS_ZONEOPT_CHECKNAMES |
 				 DNS_ZONEOPT_CHECKNAMESFAIL |
 				 DNS_ZONEOPT_CHECKWILDCARD);
-	} else
-		zone_options |= (DNS_ZONEOPT_CHECKDUPRR |
-				 DNS_ZONEOPT_CHECKSPF);
+	}
 
 #define ARGCMP(X) (strcmp(isc_commandline_argument, X) == 0)
 
 	isc_commandline_errprint = ISC_FALSE;
 
 	while ((c = isc_commandline_parse(argc, argv,
-			       "c:df:hi:jJ:k:L:l:m:n:qr:s:t:o:vw:DF:M:S:T:W:"))
+					 "c:df:hi:jk:m:n:qs:t:o:vw:DF:M:S:W:"))
 	       != EOF) {
 		switch (c) {
 		case 'c':
@@ -223,11 +211,6 @@ main(int argc, char **argv) {
 			nomerge = ISC_FALSE;
 			break;
 
-		case 'J':
-			journal = isc_commandline_argument;
-			nomerge = ISC_FALSE;
-			break;
-
 		case 'k':
 			if (ARGCMP("warn")) {
 				zone_options |= DNS_ZONEOPT_CHECKNAMES;
@@ -245,29 +228,6 @@ main(int argc, char **argv) {
 			}
 			break;
 
-		case 'L':
-			snset = ISC_TRUE;
-			endp = NULL;
-			serialnum = strtol(isc_commandline_argument, &endp, 0);
-			if (*endp != '\0') {
-				fprintf(stderr, "source serial number "
-						"must be numeric");
-				exit(1);
-			}
-			break;
-
-		case 'l':
-			zone_options2 |= DNS_ZONEOPT2_CHECKTTL;
-			endp = NULL;
-			maxttl = strtol(isc_commandline_argument, &endp, 0);
-			if (*endp != '\0') {
-				fprintf(stderr, "maximum TTL "
-						"must be numeric");
-				exit(1);
-			}
-			break;
-
-
 		case 'n':
 			if (ARGCMP("ignore")) {
 				zone_options &= ~(DNS_ZONEOPT_CHECKNS|
@@ -302,27 +262,16 @@ main(int argc, char **argv) {
 			}
 			break;
 
-		case 'o':
-			output_filename = isc_commandline_argument;
-			break;
-
 		case 'q':
 			quiet++;
 			break;
 
-		case 'r':
-			if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-				zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-			} else if (ARGCMP("fail")) {
-				zone_options |= DNS_ZONEOPT_CHECKDUPRR |
-						DNS_ZONEOPT_CHECKDUPRRFAIL;
-			} else if (ARGCMP("ignore")) {
-				zone_options &= ~(DNS_ZONEOPT_CHECKDUPRR |
-						  DNS_ZONEOPT_CHECKDUPRRFAIL);
-			} else {
-				fprintf(stderr, "invalid argument to -r: %s\n",
-					isc_commandline_argument);
+		case 't':
+			result = isc_dir_chroot(isc_commandline_argument);
+			if (result != ISC_R_SUCCESS) {
+				fprintf(stderr, "isc_dir_chroot: %s: %s\n",
+					isc_commandline_argument,
+					isc_result_totext(result));
 				exit(1);
 			}
 			break;
@@ -340,14 +289,8 @@ main(int argc, char **argv) {
 			}
 			break;
 
-		case 't':
-			result = isc_dir_chroot(isc_commandline_argument);
-			if (result != ISC_R_SUCCESS) {
-				fprintf(stderr, "isc_dir_chroot: %s: %s\n",
-					isc_commandline_argument,
-					isc_result_totext(result));
-				exit(1);
-			}
+		case 'o':
+			output_filename = isc_commandline_argument;
 			break;
 
 		case 'v':
@@ -396,18 +339,6 @@ main(int argc, char **argv) {
 			}
 			break;
 
-		case 'T':
-			if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKSPF;
-			} else if (ARGCMP("ignore")) {
-				zone_options &= ~DNS_ZONEOPT_CHECKSPF;
-			} else {
-				fprintf(stderr, "invalid argument to -T: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
 		case 'W':
 			if (ARGCMP("warn"))
 				zone_options |= DNS_ZONEOPT_CHECKWILDCARD;
@@ -419,7 +350,6 @@ main(int argc, char **argv) {
 			if (isc_commandline_option != '?')
 				fprintf(stderr, "%s: invalid argument -%c\n",
 					prog_name, isc_commandline_option);
-			/* FALLTHROUGH */
 		case 'h':
 			usage();
 
@@ -444,13 +374,7 @@ main(int argc, char **argv) {
 			inputformat = dns_masterformat_text;
 		else if (strcasecmp(inputformatstr, "raw") == 0)
 			inputformat = dns_masterformat_raw;
-		else if (strncasecmp(inputformatstr, "raw=", 4) == 0) {
-			inputformat = dns_masterformat_raw;
-			fprintf(stderr,
-				"WARNING: input format raw, version ignored\n");
-		} else if (strcasecmp(inputformatstr, "map") == 0) {
-			inputformat = dns_masterformat_map;
-		} else {
+		else {
 			fprintf(stderr, "unknown file format: %s\n",
 			    inputformatstr);
 			exit(1);
@@ -458,24 +382,11 @@ main(int argc, char **argv) {
 	}
 
 	if (outputformatstr != NULL) {
-		if (strcasecmp(outputformatstr, "text") == 0) {
+		if (strcasecmp(outputformatstr, "text") == 0)
 			outputformat = dns_masterformat_text;
-		} else if (strcasecmp(outputformatstr, "raw") == 0) {
+		else if (strcasecmp(outputformatstr, "raw") == 0)
 			outputformat = dns_masterformat_raw;
-		} else if (strncasecmp(outputformatstr, "raw=", 4) == 0) {
-			char *end;
-
-			outputformat = dns_masterformat_raw;
-			rawversion = strtol(outputformatstr + 4, &end, 10);
-			if (end == outputformatstr + 4 || *end != '\0' ||
-			    rawversion > 1U) {
-				fprintf(stderr,
-					"unknown raw format version\n");
-				exit(1);
-			}
-		} else if (strcasecmp(outputformatstr, "map") == 0) {
-			outputformat = dns_masterformat_map;
-		} else {
+		else {
 			fprintf(stderr, "unknown file format: %s\n",
 				outputformatstr);
 			exit(1);
@@ -484,7 +395,6 @@ main(int argc, char **argv) {
 
 	if (progmode == progmode_compile) {
 		dumpzone = 1;	/* always dump */
-		logdump = !quiet;
 		if (output_filename == NULL) {
 			fprintf(stderr,
 				"output file required, but not specified\n");
@@ -503,10 +413,8 @@ main(int argc, char **argv) {
 	    (output_filename == NULL ||
 	     strcmp(output_filename, "-") == 0 ||
 	     strcmp(output_filename, "/dev/fd/1") == 0 ||
-	     strcmp(output_filename, "/dev/stdout") == 0)) {
+	     strcmp(output_filename, "/dev/stdout") == 0))
 		errout = stderr;
-		logdump = ISC_FALSE;
-	}
 
 	if (isc_commandline_index + 2 != argc)
 		usage();
@@ -528,23 +436,16 @@ main(int argc, char **argv) {
 	origin = argv[isc_commandline_index++];
 	filename = argv[isc_commandline_index++];
 	result = load_zone(mctx, origin, filename, inputformat, classname,
-			   maxttl, &zone);
-
-	if (snset) {
-		dns_master_initrawheader(&header);
-		header.flags = DNS_MASTERRAW_SOURCESERIALSET;
-		header.sourceserial = serialnum;
-		dns_zone_setrawdata(zone, &header);
-	}
+			   &zone);
 
 	if (result == ISC_R_SUCCESS && dumpzone) {
-		if (logdump) {
+		if (!quiet && progmode == progmode_compile) {
 			fprintf(errout, "dump zone to %s...", output_filename);
 			fflush(errout);
 		}
 		result = dump_zone(origin, zone, output_filename,
-				   outputformat, outputstyle, rawversion);
-		if (logdump)
+				   outputformat, outputstyle);
+		if (!quiet && progmode == progmode_compile)
 			fprintf(errout, "done\n");
 	}
 

bin/check/named-checkzone.docbook

@@ -1,19 +1,27 @@
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) 2000-2002, 2004-2007, 2009-2016  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004-2007, 2009  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002  Internet Software Consortium.
  -
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ - Permission to use, copy, modify, and/or distribute this software for any
+ - purpose with or without fee is hereby granted, provided that the above
+ - copyright notice and this permission notice appear in all copies.
+ -
+ - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkzone">
-  <info>
-    <date>2014-02-19</date>
-  </info>
+<!-- $Id: named-checkzone.docbook,v 1.34.334.3 2009/11/10 20:01:41 each Exp $ -->
+<refentry id="man.named-checkzone">
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>June 13, 2000</date>
   </refentryinfo>
 
   <refmeta>
@@ -24,23 +32,19 @@
 
   <docinfo>
     <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
       <year>2004</year>
       <year>2005</year>
       <year>2006</year>
       <year>2007</year>
       <year>2009</year>
-      <year>2010</year>
-      <year>2011</year>
-      <year>2012</year>
-      <year>2013</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
+    <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
+      <holder>Internet Software Consortium.</holder>
+    </copyright>
   </docinfo>
 
   <refnamediv>
@@ -50,68 +54,58 @@
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-checkzone</command>
-      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-J <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-M <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-l <replaceable class="parameter">ttl</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-S <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">zonename</arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-d</option></arg>
+      <arg><option>-h</option></arg>
+      <arg><option>-j</option></arg>
+      <arg><option>-q</option></arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg><option>-f <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-F <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-M <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-s <replaceable class="parameter">style</replaceable></option></arg>
+      <arg><option>-S <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-D</option></arg>
+      <arg><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="req">zonename</arg>
+      <arg choice="req">filename</arg>
     </cmdsynopsis>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-compilezone</command>
-      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-C <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-J <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-l <replaceable class="parameter">ttl</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">zonename</arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-d</option></arg>
+      <arg><option>-j</option></arg>
+      <arg><option>-q</option></arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg><option>-C <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-f <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-F <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg><option>-s <replaceable class="parameter">style</replaceable></option></arg>
+      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-D</option></arg>
+      <arg><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="req"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg choice="req">zonename</arg>
+      <arg choice="req">filename</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
+  <refsect1>
+    <title>DESCRIPTION</title>
     <para><command>named-checkzone</command>
       checks the syntax and integrity of a zone file.  It performs the
       same checks as <command>named</command> does when loading a
@@ -129,10 +123,10 @@
         least be as strict as those specified in the
 	<command>named</command> configuration file.
      </para>
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -176,19 +170,7 @@
         <term>-j</term>
         <listitem>
           <para>
-            When loading a zone file, read the journal if it exists.
-            The journal file name is assumed to be the zone file name
-	    appended with the string <filename>.jnl</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-J <replaceable class="parameter">filename</replaceable></term>
-        <listitem>
-          <para>
-            When loading the zone file read the journal from the given
-            file, if it exists. (Implies -j.)
+            When loading the zone file read the journal if it exists.
           </para>
         </listitem>
       </varlistentry>
@@ -251,8 +233,8 @@
 	<listitem>
 	  <para>
 	    Specify the format of the zone file.
-	    Possible formats are <command>"text"</command> (default),
-	    <command>"raw"</command>, and <command>"map"</command>.
+	    Possible formats are <command>"text"</command> (default)
+	    and <command>"raw"</command>.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -262,21 +244,12 @@
 	<listitem>
 	  <para>
 	    Specify the format of the output file specified.
+	    Possible formats are <command>"text"</command> (default)
+	    and <command>"raw"</command>.
 	    For <command>named-checkzone</command>,
 	    this does not cause any effects unless it dumps the zone
 	    contents.
 	  </para>
-	  <para>
-	    Possible formats are <command>"text"</command> (default),
-	    which is the standard textual representation of the zone,
-	    and <command>"map"</command>, <command>"raw"</command>,
-            and <command>"raw=N"</command>, which store the zone in a
-            binary format for rapid loading by <command>named</command>.
-            <command>"raw=N"</command> specifies the format version of
-            the raw zone file: if N is 0, the raw file can be read by
-            any version of <command>named</command>; if N is 1, the file
-            can be read by release 9.9.0 or higher; the default is 1.
-	  </para>
 	</listitem>
       </varlistentry>
 
@@ -295,31 +268,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term>-l <replaceable class="parameter">ttl</replaceable></term>
-        <listitem>
-          <para>
-            Sets a maximum permissible TTL for the input file.
-            Any record with a TTL higher than this value will cause
-            the zone to be rejected.  This is similar to using the
-            <command>max-zone-ttl</command> option in
-            <filename>named.conf</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-L <replaceable class="parameter">serial</replaceable></term>
-        <listitem>
-          <para>
-            When compiling a zone to "raw" or "map" format, set the
-            "source serial" value in the header to the specified serial
-            number.  (This is expected to be used primarily for testing
-            purposes.)
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-m <replaceable class="parameter">mode</replaceable></term>
         <listitem>
@@ -371,19 +319,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-	<term>-r <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-	  <para>
-            Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.
-            Possible modes are <command>"fail"</command>,
-            <command>"warn"</command> (default) and
-            <command>"ignore"</command>.
-	  </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
 	<term>-s <replaceable class="parameter">style</replaceable></term>
 	<listitem>
@@ -423,23 +358,11 @@
             Chroot to <filename>directory</filename> so that
             include
             directives in the configuration file are processed as if
-            run by a similarly chrooted <command>named</command>.
+            run by a similarly chrooted named.
           </para>
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-	<term>-T <replaceable class="parameter">mode</replaceable></term>
-	<listitem>
-	  <para>
-	    Check if Sender Policy Framework (SPF) records exist
-	    and issues a warning if an SPF-formatted TXT record is
-	    not also present.  Possible modes are <command>"warn"</command>
-	    (default), <command>"ignore"</command>.
-	  </para>
-	</listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-w <replaceable class="parameter">directory</replaceable></term>
         <listitem>
@@ -497,27 +420,37 @@
 
     </variablelist>
 
-  </refsection>
-
-  <refsection><info><title>RETURN VALUES</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>RETURN VALUES</title>
     <para><command>named-checkzone</command>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
       <citerefentry>
-        <refentrytitle>named-checkconf</refentrytitle><manvolnum>8</manvolnum>
+        <refentrytitle>named-checkconf</refentrytitle><manvolnum>8</manvolnum>  
       </citerefentry>,
       <citetitle>RFC 1035</citetitle>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
+  </refsect1>
 
-</refentry>
+  <refsect1>
+    <title>AUTHOR</title>
+    <para><corpauthor>Internet Systems Consortium</corpauthor>
+    </para>
+  </refsect1>
+
+</refentry><!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->

bin/check/named-checkzone.html

@@ -1,429 +1,262 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2000-2002, 2004-2007, 2009-2016 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004-2007, 2009 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002 Internet Software Consortium.
  - 
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ - Permission to use, copy, modify, and/or distribute this software for any
+ - purpose with or without fee is hereby granted, provided that the above
+ - copyright notice and this permission notice appear in all copies.
+ - 
+ - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
+ - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ - PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
+<!-- $Id: named-checkzone.html,v 1.42.334.3 2009/11/11 01:56:22 tbox Exp $ -->
+<html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>named-checkzone</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
 <a name="man.named-checkzone"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  
-
-  <div class="refnamediv">
+<div class="refnamediv">
 <h2>Name</h2>
-<p>
-    <span class="application">named-checkzone</span>, 
-    <span class="application">named-compilezone</span>
-     &#8212; zone file validity checking or converting tool
-  </p>
+<p><span class="application">named-checkzone</span>, <span class="application">named-compilezone</span> &#8212; zone file validity checking or converting tool</p>
 </div>
-
-  <div class="refsynopsisdiv">
+<div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-checkzone</code> 
-       [<code class="option">-d</code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-j</code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-v</code>]
-       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
-       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-J <em class="replaceable"><code>filename</code></em></code>]
-       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-M <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-l <em class="replaceable"><code>ttl</code></em></code>]
-       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
-       [<code class="option">-o <em class="replaceable"><code>filename</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
-       [<code class="option">-S <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-D</code>]
-       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
-       {zonename}
-       {filename}
-    </p></div>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-compilezone</code> 
-       [<code class="option">-d</code>]
-       [<code class="option">-j</code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-v</code>]
-       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
-       [<code class="option">-C <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-J <em class="replaceable"><code>filename</code></em></code>]
-       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-l <em class="replaceable"><code>ttl</code></em></code>]
-       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-D</code>]
-       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
-       {<code class="option">-o <em class="replaceable"><code>filename</code></em></code>}
-       {zonename}
-       {filename}
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>named-checkzone</strong></span>
+<div class="cmdsynopsis"><p><code class="command">named-checkzone</code>  [<code class="option">-d</code>] [<code class="option">-h</code>] [<code class="option">-j</code>] [<code class="option">-q</code>] [<code class="option">-v</code>] [<code class="option">-c <em class="replaceable"><code>class</code></em></code>] [<code class="option">-f <em class="replaceable"><code>format</code></em></code>] [<code class="option">-F <em class="replaceable"><code>format</code></em></code>] [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-M <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-s <em class="replaceable"><code>style</code></em></code>] [<code class="option">-S <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-D</code>] [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>] {zonename} {filename}</p></div>
+<div class="cmdsynopsis"><p><code class="command">named-compilezone</code>  [<code class="option">-d</code>] [<code class="option">-j</code>] [<code class="option">-q</code>] [<code class="option">-v</code>] [<code class="option">-c <em class="replaceable"><code>class</code></em></code>] [<code class="option">-C <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-f <em class="replaceable"><code>format</code></em></code>] [<code class="option">-F <em class="replaceable"><code>format</code></em></code>] [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-o <em class="replaceable"><code>filename</code></em></code>] [<code class="option">-s <em class="replaceable"><code>style</code></em></code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-D</code>] [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>] {<code class="option">-o <em class="replaceable"><code>filename</code></em></code>} {zonename} {filename}</p></div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543674"></a><h2>DESCRIPTION</h2>
+<p><span><strong class="command">named-checkzone</strong></span>
       checks the syntax and integrity of a zone file.  It performs the
-      same checks as <span class="command"><strong>named</strong></span> does when loading a
-      zone.  This makes <span class="command"><strong>named-checkzone</strong></span> useful for
+      same checks as <span><strong class="command">named</strong></span> does when loading a
+      zone.  This makes <span><strong class="command">named-checkzone</strong></span> useful for
       checking zone files before configuring them into a name server.
     </p>
-    <p>
-        <span class="command"><strong>named-compilezone</strong></span> is similar to
-	<span class="command"><strong>named-checkzone</strong></span>, but it always dumps the
+<p>
+        <span><strong class="command">named-compilezone</strong></span> is similar to
+	<span><strong class="command">named-checkzone</strong></span>, but it always dumps the
         zone contents to a specified file in a specified format.
 	Additionally, it applies stricter check levels by default,
         since the dump output will be used as an actual zone file
-	loaded by <span class="command"><strong>named</strong></span>.
+	loaded by <span><strong class="command">named</strong></span>.
 	When manually specified otherwise, the check levels must at
         least be as strict as those specified in the
-	<span class="command"><strong>named</strong></span> configuration file.
+	<span><strong class="command">named</strong></span> configuration file.
      </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543709"></a><h2>OPTIONS</h2>
+<div class="variablelist"><dl>
 <dt><span class="term">-d</span></dt>
-<dd>
-          <p>
+<dd><p>
             Enable debugging.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-h</span></dt>
-<dd>
-          <p>
+<dd><p>
             Print the usage summary and exit.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-q</span></dt>
-<dd>
-          <p>
+<dd><p>
             Quiet mode - exit code only.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-v</span></dt>
-<dd>
-          <p>
-            Print the version of the <span class="command"><strong>named-checkzone</strong></span>
+<dd><p>
+            Print the version of the <span><strong class="command">named-checkzone</strong></span>
             program and exit.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-j</span></dt>
-<dd>
-          <p>
-            When loading a zone file, read the journal if it exists.
-            The journal file name is assumed to be the zone file name
-	    appended with the string <code class="filename">.jnl</code>.
-          </p>
-        </dd>
-<dt><span class="term">-J <em class="replaceable"><code>filename</code></em></span></dt>
-<dd>
-          <p>
-            When loading the zone file read the journal from the given
-            file, if it exists. (Implies -j.)
-          </p>
-        </dd>
+<dd><p>
+            When loading the zone file read the journal if it exists.
+          </p></dd>
 <dt><span class="term">-c <em class="replaceable"><code>class</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify the class of the zone.  If not specified, "IN" is assumed.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-i <em class="replaceable"><code>mode</code></em></span></dt>
 <dd>
-	  <p>
+<p>
 	      Perform post-load zone integrity checks.  Possible modes are
-	      <span class="command"><strong>"full"</strong></span> (default),
-	      <span class="command"><strong>"full-sibling"</strong></span>,
-	      <span class="command"><strong>"local"</strong></span>,
-	      <span class="command"><strong>"local-sibling"</strong></span> and
-	      <span class="command"><strong>"none"</strong></span>.
+	      <span><strong class="command">"full"</strong></span> (default),
+	      <span><strong class="command">"full-sibling"</strong></span>,
+	      <span><strong class="command">"local"</strong></span>,
+	      <span><strong class="command">"local-sibling"</strong></span> and
+	      <span><strong class="command">"none"</strong></span>.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that MX records
+<p>
+	      Mode <span><strong class="command">"full"</strong></span> checks that MX records
 	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
+	      hostnames).  Mode <span><strong class="command">"local"</strong></span> only
 	      checks MX records which refer to in-zone hostnames.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that SRV records
+<p>
+	      Mode <span><strong class="command">"full"</strong></span> checks that SRV records
 	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
+	      hostnames).  Mode <span><strong class="command">"local"</strong></span> only
 	      checks SRV records which refer to in-zone hostnames.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that delegation NS
+<p>
+	      Mode <span><strong class="command">"full"</strong></span> checks that delegation NS
 	      records refer to A or AAAA record (both in-zone and out-of-zone
 	      hostnames).  It also checks that glue address records
 	      in the zone match those advertised by the child.
-	      Mode <span class="command"><strong>"local"</strong></span> only checks NS records which
+	      Mode <span><strong class="command">"local"</strong></span> only checks NS records which
 	      refer to in-zone hostnames or that some required glue exists,
 	      that is when the nameserver is in a child zone.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full-sibling"</strong></span> and
-	      <span class="command"><strong>"local-sibling"</strong></span> disable sibling glue
-	      checks but are otherwise the same as <span class="command"><strong>"full"</strong></span>
-	      and <span class="command"><strong>"local"</strong></span> respectively.
+<p>
+	      Mode <span><strong class="command">"full-sibling"</strong></span> and
+	      <span><strong class="command">"local-sibling"</strong></span> disable sibling glue
+	      checks but are otherwise the same as <span><strong class="command">"full"</strong></span>
+	      and <span><strong class="command">"local"</strong></span> respectively.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"none"</strong></span> disables the checks.
+<p>
+	      Mode <span><strong class="command">"none"</strong></span> disables the checks.
 	  </p>
-	</dd>
+</dd>
 <dt><span class="term">-f <em class="replaceable"><code>format</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Specify the format of the zone file.
-	    Possible formats are <span class="command"><strong>"text"</strong></span> (default),
-	    <span class="command"><strong>"raw"</strong></span>, and <span class="command"><strong>"map"</strong></span>.
-	  </p>
-	</dd>
+	    Possible formats are <span><strong class="command">"text"</strong></span> (default)
+	    and <span><strong class="command">"raw"</strong></span>.
+	  </p></dd>
 <dt><span class="term">-F <em class="replaceable"><code>format</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Specify the format of the output file specified.
-	    For <span class="command"><strong>named-checkzone</strong></span>,
+	    Possible formats are <span><strong class="command">"text"</strong></span> (default)
+	    and <span><strong class="command">"raw"</strong></span>.
+	    For <span><strong class="command">named-checkzone</strong></span>,
 	    this does not cause any effects unless it dumps the zone
 	    contents.
-	  </p>
-	  <p>
-	    Possible formats are <span class="command"><strong>"text"</strong></span> (default),
-	    which is the standard textual representation of the zone,
-	    and <span class="command"><strong>"map"</strong></span>, <span class="command"><strong>"raw"</strong></span>,
-            and <span class="command"><strong>"raw=N"</strong></span>, which store the zone in a
-            binary format for rapid loading by <span class="command"><strong>named</strong></span>.
-            <span class="command"><strong>"raw=N"</strong></span> specifies the format version of
-            the raw zone file: if N is 0, the raw file can be read by
-            any version of <span class="command"><strong>named</strong></span>; if N is 1, the file
-            can be read by release 9.9.0 or higher; the default is 1.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-k <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
-            Perform <span class="command"><strong>"check-names"</strong></span> checks with the
+<dd><p>
+            Perform <span><strong class="command">"check-names"</strong></span> checks with the
 	    specified failure mode.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>
-	    (default for <span class="command"><strong>named-compilezone</strong></span>),
-            <span class="command"><strong>"warn"</strong></span>
-	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-l <em class="replaceable"><code>ttl</code></em></span></dt>
-<dd>
-          <p>
-            Sets a maximum permissible TTL for the input file.
-            Any record with a TTL higher than this value will cause
-            the zone to be rejected.  This is similar to using the
-            <span class="command"><strong>max-zone-ttl</strong></span> option in
-            <code class="filename">named.conf</code>.
-          </p>
-        </dd>
-<dt><span class="term">-L <em class="replaceable"><code>serial</code></em></span></dt>
-<dd>
-          <p>
-            When compiling a zone to "raw" or "map" format, set the
-            "source serial" value in the header to the specified serial
-            number.  (This is expected to be used primarily for testing
-            purposes.)
-          </p>
-        </dd>
+            Possible modes are <span><strong class="command">"fail"</strong></span>
+	    (default for <span><strong class="command">named-compilezone</strong></span>),
+            <span><strong class="command">"warn"</strong></span>
+	    (default for <span><strong class="command">named-checkzone</strong></span>) and
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">-m <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify whether MX records should be checked to see if they
-            are addresses.  Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
+            are addresses.  Possible modes are <span><strong class="command">"fail"</strong></span>,
+            <span><strong class="command">"warn"</strong></span> (default) and
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">-M <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Check if a MX record refers to a CNAME.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
+            Possible modes are <span><strong class="command">"fail"</strong></span>,
+            <span><strong class="command">"warn"</strong></span> (default) and
+            <span><strong class="command">"ignore"</strong></span>.
+	  </p></dd>
 <dt><span class="term">-n <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify whether NS records should be checked to see if they
             are addresses.
-	    Possible modes are <span class="command"><strong>"fail"</strong></span>
-	    (default for <span class="command"><strong>named-compilezone</strong></span>),
-            <span class="command"><strong>"warn"</strong></span>
-	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
+	    Possible modes are <span><strong class="command">"fail"</strong></span>
+	    (default for <span><strong class="command">named-compilezone</strong></span>),
+            <span><strong class="command">"warn"</strong></span>
+	    (default for <span><strong class="command">named-checkzone</strong></span>) and
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">-o <em class="replaceable"><code>filename</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Write zone output to <code class="filename">filename</code>.
 	    If <code class="filename">filename</code> is <code class="filename">-</code> then
 	    write to standard out.
-	    This is mandatory for <span class="command"><strong>named-compilezone</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-r <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-            Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
+	    This is mandatory for <span><strong class="command">named-compilezone</strong></span>.
+          </p></dd>
 <dt><span class="term">-s <em class="replaceable"><code>style</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Specify the style of the dumped zone file.
-	    Possible styles are <span class="command"><strong>"full"</strong></span> (default)
-	    and <span class="command"><strong>"relative"</strong></span>.
+	    Possible styles are <span><strong class="command">"full"</strong></span> (default)
+	    and <span><strong class="command">"relative"</strong></span>.
 	    The full format is most suitable for processing
 	    automatically by a separate script.
 	    On the other hand, the relative format is more
 	    human-readable and is thus suitable for editing by hand.
-	    For <span class="command"><strong>named-checkzone</strong></span>
+	    For <span><strong class="command">named-checkzone</strong></span>
 	    this does not cause any effects unless it dumps the zone
 	    contents.
 	    It also does not have any meaning if the output format
 	    is not text.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-S <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Check if a SRV record refers to a CNAME.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
+            Possible modes are <span><strong class="command">"fail"</strong></span>,
+            <span><strong class="command">"warn"</strong></span> (default) and
+            <span><strong class="command">"ignore"</strong></span>.
+	  </p></dd>
 <dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Chroot to <code class="filename">directory</code> so that
             include
             directives in the configuration file are processed as if
-            run by a similarly chrooted <span class="command"><strong>named</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-T <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-	    Check if Sender Policy Framework (SPF) records exist
-	    and issues a warning if an SPF-formatted TXT record is
-	    not also present.  Possible modes are <span class="command"><strong>"warn"</strong></span>
-	    (default), <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-	</dd>
+            run by a similarly chrooted named.
+          </p></dd>
 <dt><span class="term">-w <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             chdir to <code class="filename">directory</code> so that
             relative
             filenames in master file $INCLUDE directives work.  This
             is similar to the directory clause in
             <code class="filename">named.conf</code>.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-D</span></dt>
-<dd>
-          <p>
+<dd><p>
             Dump zone file in canonical format.
-	    This is always enabled for <span class="command"><strong>named-compilezone</strong></span>.
-          </p>
-        </dd>
+	    This is always enabled for <span><strong class="command">named-compilezone</strong></span>.
+          </p></dd>
 <dt><span class="term">-W <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify whether to check for non-terminal wildcards.
             Non-terminal wildcards are almost always the result of a
             failure to understand the wildcard matching algorithm (RFC 1034).
-            Possible modes are <span class="command"><strong>"warn"</strong></span> (default)
+            Possible modes are <span><strong class="command">"warn"</strong></span> (default)
             and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">zonename</span></dt>
-<dd>
-          <p>
+<dd><p>
             The domain name of the zone being checked.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">filename</span></dt>
-<dd>
-          <p>
+<dd><p>
             The name of the zone file.
-          </p>
-        </dd>
+          </p></dd>
 </dl></div>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>RETURN VALUES</h2>
-
-    <p><span class="command"><strong>named-checkzone</strong></span>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2544330"></a><h2>RETURN VALUES</h2>
+<p><span><strong class="command">named-checkzone</strong></span>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named-checkconf</span>(8)
-      </span>,
+</div>
+<div class="refsect1" lang="en">
+<a name="id2544342"></a><h2>SEE ALSO</h2>
+<p><span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
+      <span class="citerefentry"><span class="refentrytitle">named-checkconf</span>(8)</span>,
       <em class="citetitle">RFC 1035</em>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-  </div>
-
+</div>
+<div class="refsect1" lang="en">
+<a name="id2544375"></a><h2>AUTHOR</h2>
+<p><span class="corpauthor">Internet Systems Consortium</span>
+    </p>
+</div>
 </div></body>
 </html>

bin/check/win32/checkconf.dsp.in

@@ -1,107 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checkconf" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=checkconf - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checkconf - @PLATFORM@ Release"
-# Name "checkconf - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkconf.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/checkconf.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "checkconf"=".\checkconf.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/checkconf.mak.in

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on checkconf.dsp
-!IF "$(CFG)" == ""
-CFG=checkconf - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to checkconf - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "checkconf - @PLATFORM@ Release" && "$(CFG)" != "checkconf - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - @PLATFORM@ Release" "libisccfg - @PLATFORM@ Release" "libisc - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - @PLATFORM@ ReleaseCLEAN" "libisccfg - @PLATFORM@ ReleaseCLEAN" "libdns - @PLATFORM@ ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(OUTDIR)\checkconf.bsc"
-	-@erase "..\..\..\Build\Release\named-checkconf.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\checkconf.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib  ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib"
-
-"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - @PLATFORM@ Debug" "libisccfg - @PLATFORM@ Debug" "libisc - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - @PLATFORM@ DebugCLEAN" "libisccfg - @PLATFORM@ DebugCLEAN" "libdns - @PLATFORM@ DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkconf.pdb"
-	-@erase "$(OUTDIR)\checkconf.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
-	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib  ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib"
-
-"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("checkconf.dep")
-!INCLUDE "checkconf.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "checkconf.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "checkconf - @PLATFORM@ Release" || "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-SOURCE="..\check-tool.c"
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE="..\named-checkconf.c"
-
-"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libisc - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libisc - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libisccfg - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libisccfg - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libdns - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libdns - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/check/win32/checkconf.vcxproj.filters.in

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkconf.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checkconf.vcxproj.in

@@ -1,113 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{03A96113-CB14-43AA-AEB2-48950E3915C5}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checkconf</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkconf.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checkconf.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/checktool.dsp

@@ -0,0 +1,113 @@
+# Microsoft Developer Studio Project File - Name="checktool" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static-Link Library" 0x0104
+
+CFG=checktool - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "checktool.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "checktool.mak" CFG="checktool - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "checktool - Win32 Release" (based on "Win32 (x86) Static-Link Library")
+!MESSAGE "checktool - Win32 Debug" (based on "Win32 (x86) Static-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "checktool - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /YX /FD /c /Fdchecktool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /out:"Release/checktool.lib"
+
+!ELSEIF  "$(CFG)" == "checktool - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR /YX /FD /GZ /c /Fdchecktool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /debug out:"Debug/checktool.lib"
+
+!ENDIF 
+
+# Begin Target
+
+# Name "checktool - Win32 Release"
+# Name "checktool - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# Begin Group "Main Dns Lib"
+
+# PROP Default_Filter "c"
+# Begin Source File
+
+SOURCE=..\check-tool.c
+# End Source File
+# End Group
+# End Target
+# End Project

bin/check/win32/checktool.dsp.in

@@ -1,113 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checktool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
-
-CFG=checktool - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak" CFG="checktool - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checktool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE "checktool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checktool - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/checktool.lib"
-
-!ELSEIF  "$(CFG)" == "checktool - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" @CRYPTO@ /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug out:"Debug/checktool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checktool - @PLATFORM@ Release"
-# Name "checktool - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\check-tool.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/check/win32/checktool.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\check-tool.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checktool.vcxproj.in

@@ -1,99 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\check-tool.c" />
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{2C1F7096-C5B5-48D4-846F-A7ACA454335D}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checktool</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <OutDir>.\$(Configuration)\</OutDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <OutDir>.\$(Configuration)\</OutDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Lib>
-      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-    </Lib>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Lib>
-      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-    </Lib>
-  </ItemDefinitionGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checktool.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/checkzone.dsp.in

@@ -1,108 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checkzone" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=checkzone - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" @COPTY@ /FD /c
-# SUBTRACT CPP /Fr
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checkzone - @PLATFORM@ Release"
-# Name "checkzone - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkzone.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/checkzone.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "checkzone"=".\checkzone.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/checkzone.mak.in

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on checkzone.dsp
-!IF "$(CFG)" == ""
-CFG=checkzone - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to checkzone - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "checkzone - @PLATFORM@ Release" && "$(CFG)" != "checkzone - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkzone.exe"
-
-!ELSE 
-
-ALL : "libisc - @PLATFORM@ Release" "libdns - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkzone.exe"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - @PLATFORM@ ReleaseCLEAN" "libisc - @PLATFORM@ ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\named-checkzone.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /Fp"$(INTDIR)\checkzone.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib"
-
-"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
-
-!ELSE 
-
-ALL : "libisc - @PLATFORM@ Debug" "libdns - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - @PLATFORM@ DebugCLEAN" "libisc - @PLATFORM@ DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\named-checkzone.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkzone.pdb"
-	-@erase "$(OUTDIR)\checkzone.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
-	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkzone.sbr"
-
-"$(OUTDIR)\checkzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib"
-
-"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("checkzone.dep")
-!INCLUDE "checkzone.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "checkzone.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "checkzone - @PLATFORM@ Release" || "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-SOURCE="..\check-tool.c"
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-
-"$(INTDIR)\check-tool.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE="..\named-checkzone.c"
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-
-"$(INTDIR)\named-checkzone.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-"libdns - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-"libdns - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-"libisc - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-"libisc - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/check/win32/checkzone.vcxproj.filters.in

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkzone.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checkzone.vcxproj.in

@@ -1,124 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{66028555-7DD5-4016-B601-9EF9A1EE8BFA}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checkzone</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y named-checkzone.exe named-compilezone.exe
-copy /Y named-checkzone.ilk named-compilezone.ilk
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y named-checkzone.exe named-compilezone.exe
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkzone.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checkzone.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/namedcheckconf.dsp

@@ -0,0 +1,107 @@
+# Microsoft Developer Studio Project File - Name="namedcheckconf" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=namedcheckconf - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkconf.exe"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "namedcheckconf - Win32 Release"
+# Name "namedcheckconf - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\named-checkconf.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/namedcheckconf.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "namedcheckconf"=".\namedcheckconf.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/namedcheckconf.mak

@@ -0,0 +1,404 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckconf.dsp
+!IF "$(CFG)" == ""
+CFG=namedcheckconf - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to namedcheckconf - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "namedcheckconf - Win32 Release" && "$(CFG)" != "namedcheckconf - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+# Begin Custom Macros
+OutDir=.\Release
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ELSE 
+
+ALL : "libdns - Win32 Release" "libisccfg - Win32 Release" "libisc - Win32 Release" "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libisc - Win32 ReleaseCLEAN" "libisccfg - Win32 ReleaseCLEAN" "libdns - Win32 ReleaseCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\namedcheckconf.bsc"
+	-@erase "..\..\..\Build\Release\named-checkconf.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\namedcheckconf.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib  ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" /machine:I386 /out:"../../../Build/Release/named-checkconf.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj" \
+	"..\..\..\lib\isc\win32\Release\libisc.lib" \
+	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
+	"..\..\..\lib\dns\win32\Release\libdns.lib"
+
+"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ELSE 
+
+ALL : "libdns - Win32 Debug" "libisccfg - Win32 Debug" "libisc - Win32 Debug" "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libisc - Win32 DebugCLEAN" "libisccfg - Win32 DebugCLEAN" "libdns - Win32 DebugCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkconf.pdb"
+	-@erase "$(OUTDIR)\namedcheckconf.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
+	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib  ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj" \
+	"..\..\..\lib\isc\win32\Debug\libisc.lib" \
+	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
+	"..\..\..\lib\dns\win32\Debug\libdns.lib"
+
+"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("namedcheckconf.dep")
+!INCLUDE "namedcheckconf.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "namedcheckconf.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "namedcheckconf - Win32 Release" || "$(CFG)" == "namedcheckconf - Win32 Debug"
+SOURCE="..\check-tool.c"
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+SOURCE="..\named-checkconf.c"
+
+"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+"libisc - Win32 Release" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+"libisc - Win32 Debug" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+"libisccfg - Win32 Release" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisccfg - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+"libisccfg - Win32 Debug" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisccfg - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+"libdns - Win32 Release" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+"libdns - Win32 Debug" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/check/win32/namedcheckzone.dsp

@@ -0,0 +1,108 @@
+# Microsoft Developer Studio Project File - Name="namedcheckzone" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=namedcheckzone - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /YX /FD /c
+# SUBTRACT CPP /Fr
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkzone.exe"
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "namedcheckzone - Win32 Release"
+# Name "namedcheckzone - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\named-checkzone.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/namedcheckzone.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "namedcheckzone"=".\namedcheckzone.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/namedcheckzone.mak

@@ -0,0 +1,404 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckzone.dsp
+!IF "$(CFG)" == ""
+CFG=namedcheckzone - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to namedcheckzone - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "namedcheckzone - Win32 Release" && "$(CFG)" != "namedcheckzone - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Release\named-checkzone.exe"
+
+!ELSE 
+
+ALL : "libisc - Win32 Release" "libdns - Win32 Release" "..\..\..\Build\Release\named-checkzone.exe"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libdns - Win32 ReleaseCLEAN" "libisc - Win32 ReleaseCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\named-checkzone.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /Fp"$(INTDIR)\namedcheckzone.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" /machine:I386 /out:"../../../Build/Release/named-checkzone.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj" \
+	"..\..\..\lib\dns\win32\Release\libdns.lib" \
+	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
+	"..\..\..\lib\isc\win32\Release\libisc.lib"
+
+"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
+
+!ELSE 
+
+ALL : "libisc - Win32 Debug" "libdns - Win32 Debug" "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libdns - Win32 DebugCLEAN" "libisc - Win32 DebugCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\named-checkzone.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkzone.pdb"
+	-@erase "$(OUTDIR)\namedcheckzone.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
+	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkzone.sbr"
+
+"$(OUTDIR)\namedcheckzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj" \
+	"..\..\..\lib\dns\win32\Debug\libdns.lib" \
+	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
+	"..\..\..\lib\isc\win32\Debug\libisc.lib"
+
+"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("namedcheckzone.dep")
+!INCLUDE "namedcheckzone.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "namedcheckzone.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "namedcheckzone - Win32 Release" || "$(CFG)" == "namedcheckzone - Win32 Debug"
+SOURCE="..\check-tool.c"
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+
+"$(INTDIR)\check-tool.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE="..\named-checkzone.c"
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+
+"$(INTDIR)\named-checkzone.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+
+"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+"libdns - Win32 Release" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+"libdns - Win32 Debug" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+"libisc - Win32 Release" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+"libisc - Win32 Debug" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/confgen/.gitignore

@@ -1,3 +0,0 @@
-ddns-confgen
-rndc-confgen
-tsig-keygen

bin/confgen/Makefile.in

@@ -1,108 +0,0 @@
-# Copyright (C) 2009, 2012, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-
-# $Id: Makefile.in,v 1.8 2009/12/05 23:31:40 each Exp $
-
-srcdir =	@srcdir@
-VPATH =		@srcdir@
-top_srcdir =	@top_srcdir@
-
-VERSION=@BIND9_VERSION@
-
-@BIND9_MAKE_INCLUDES@
-
-CINCLUDES = -I${srcdir}/include ${ISC_INCLUDES} ${ISCCC_INCLUDES} \
-	${ISCCFG_INCLUDES} ${DNS_INCLUDES} ${BIND9_INCLUDES}
-
-CDEFINES =
-CWARNINGS =
-
-ISCCFGLIBS =	../../lib/isccfg/libisccfg.@A@
-ISCCCLIBS =	../../lib/isccc/libisccc.@A@
-ISCLIBS =	../../lib/isc/libisc.@A@
-ISCNOSYMLIBS =	../../lib/isc/libisc-nosymtbl.@A@
-DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
-BIND9LIBS =	../../lib/bind9/libbind9.@A@
-
-ISCCFGDEPLIBS =	../../lib/isccfg/libisccfg.@A@
-ISCCCDEPLIBS =	../../lib/isccc/libisccc.@A@
-ISCDEPLIBS =	../../lib/isc/libisc.@A@
-DNSDEPLIBS =	../../lib/dns/libdns.@A@
-BIND9DEPLIBS =	../../lib/bind9/libbind9.@A@
-
-RNDCLIBS =	${ISCCFGLIBS} ${ISCCCLIBS} ${BIND9LIBS} ${DNSLIBS} ${ISCLIBS} @LIBS@
-RNDCDEPLIBS =	${ISCCFGDEPLIBS} ${ISCCCDEPLIBS} ${BIND9DEPLIBS} ${DNSDEPLIBS} ${ISCDEPLIBS}
-
-LIBS =		${DNSLIBS} ${ISCLIBS} @LIBS@
-
-NOSYMLIBS =	${DNSLIBS} ${ISCNOSYMLIBS} @LIBS@
-
-CONFDEPLIBS =	${DNSDEPLIBS} ${ISCDEPLIBS}
-
-SRCS=		rndc-confgen.c ddns-confgen.c
-
-SUBDIRS =	unix
-
-TARGETS =	rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@
-
-MANPAGES =	rndc-confgen.8 ddns-confgen.8
-
-HTMLPAGES =	rndc-confgen.html ddns-confgen.html
-
-MANOBJS =	${MANPAGES} ${HTMLPAGES}
-
-UOBJS =		unix/os.@O@
-
-@BIND9_MAKE_RULES@
-
-rndc-confgen.@O@: rndc-confgen.c
-	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} \
-		-DRNDC_KEYFILE=\"${sysconfdir}/rndc.key\" \
-		-c ${srcdir}/rndc-confgen.c
-
-ddns-confgen.@O@: ddns-confgen.c
-	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} -c ${srcdir}/ddns-confgen.c
-
-rndc-confgen@EXEEXT@: rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS}
-	export BASEOBJS="rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
-	${FINALBUILDCMD}
-
-ddns-confgen@EXEEXT@: ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS}
-	export BASEOBJS="ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
-	${FINALBUILDCMD}
-
-# make a link in the build directory to assist with testing
-tsig-keygen@EXEEXT@: ddns-confgen@EXEEXT@
-	rm -f tsig-keygen@EXEEXT@
-	${LINK_PROGRAM} ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@
-
-doc man:: ${MANOBJS}
-
-docclean manclean maintainer-clean::
-	rm -f ${MANOBJS}
-
-installdirs:
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${sbindir}
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man8
-
-install:: rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@ installdirs
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} rndc-confgen@EXEEXT@ ${DESTDIR}${sbindir}
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} ddns-confgen@EXEEXT@ ${DESTDIR}${sbindir}
-	${INSTALL_DATA} ${srcdir}/rndc-confgen.8 ${DESTDIR}${mandir}/man8
-	${INSTALL_DATA} ${srcdir}/ddns-confgen.8 ${DESTDIR}${mandir}/man8
-	(cd ${DESTDIR}${sbindir}; rm -f tsig-keygen@EXEEXT@; ${LINK_PROGRAM} ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@)
-	(cd ${DESTDIR}${mandir}/man8; rm -f tsig-keygen.8; ${LINK_PROGRAM} ddns-confgen.8 tsig-keygen.8)
-
-uninstall::
-	rm -f ${DESTDIR}${mandir}/man8/tsig-keygen.8
-	rm -f ${DESTDIR}${sbindir}/tsig-keygen@EXEEXT@
-	rm -f ${DESTDIR}${mandir}/man8/ddns-confgen.8
-	rm -f ${DESTDIR}${mandir}/man8/rndc-confgen.8
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/ddns-confgen@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/rndc-confgen@EXEEXT@
-
-clean distclean maintainer-clean::
-	rm -f ${TARGETS}

bin/confgen/ddns-confgen.8

@@ -1,159 +0,0 @@
-.\" Copyright (C) 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
-.\" 
-.\" This Source Code Form is subject to the terms of the Mozilla Public
-.\" License, v. 2.0. If a copy of the MPL was not distributed with this
-.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
-.\"
-.hy 0
-.ad l
-'\" t
-.\"     Title: ddns-confgen
-.\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-03-06
-.\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
-.\"
-.TH "DDNS\-CONFGEN" "8" "2014\-03\-06" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
-.SH "NAME"
-ddns-confgen \- ddns key generation tool
-.SH "SYNOPSIS"
-.HP \w'\fBtsig\-keygen\fR\ 'u
-\fBtsig\-keygen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [name]
-.HP \w'\fBddns\-confgen\fR\ 'u
-\fBddns\-confgen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-q\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\-s\ \fIname\fR | \-z\ \fIzone\fR]
-.SH "DESCRIPTION"
-.PP
-\fBtsig\-keygen\fR
-and
-\fBddns\-confgen\fR
-are invocation methods for a utility that generates keys for use in TSIG signing\&. The resulting keys can be used, for example, to secure dynamic DNS updates to a zone or for the
-\fBrndc\fR
-command channel\&.
-.PP
-When run as
-\fBtsig\-keygen\fR, a domain name can be specified on the command line which will be used as the name of the generated key\&. If no name is specified, the default is
-\fBtsig\-key\fR\&.
-.PP
-When run as
-\fBddns\-confgen\fR, the generated key is accompanied by configuration text and instructions that can be used with
-\fBnsupdate\fR
-and
-\fBnamed\fR
-when setting up dynamic DNS, including an example
-\fBupdate\-policy\fR
-statement\&. (This usage similar to the
-\fBrndc\-confgen\fR
-command for setting up command channel security\&.)
-.PP
-Note that
-\fBnamed\fR
-itself can configure a local DDNS key for use with
-\fBnsupdate \-l\fR: it does this when a zone is configured with
-\fBupdate\-policy local;\fR\&.
-\fBddns\-confgen\fR
-is only needed when a more elaborate configuration is required: for instance, if
-\fBnsupdate\fR
-is to be used from a remote system\&.
-.SH "OPTIONS"
-.PP
-\-a \fIalgorithm\fR
-.RS 4
-Specifies the algorithm to use for the TSIG key\&. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512\&. The default is hmac\-sha256\&. Options are case\-insensitive, and the "hmac\-" prefix may be omitted\&.
-.RE
-.PP
-\-h
-.RS 4
-Prints a short summary of options and arguments\&.
-.RE
-.PP
-\-k \fIkeyname\fR
-.RS 4
-Specifies the key name of the DDNS authentication key\&. The default is
-\fBddns\-key\fR
-when neither the
-\fB\-s\fR
-nor
-\fB\-z\fR
-option is specified; otherwise, the default is
-\fBddns\-key\fR
-as a separate label followed by the argument of the option, e\&.g\&.,
-\fBddns\-key\&.example\&.com\&.\fR
-The key name must have the format of a valid domain name, consisting of letters, digits, hyphens and periods\&.
-.RE
-.PP
-\-q
-.RS 4
-(\fBddns\-confgen\fR
-only\&.) Quiet mode: Print only the key, with no explanatory text or usage examples; This is essentially identical to
-\fBtsig\-keygen\fR\&.
-.RE
-.PP
-\-r \fIrandomfile\fR
-.RS 4
-Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
-/dev/random
-or equivalent device, the default source of randomness is keyboard input\&.
-randomdev
-specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
-keyboard
-indicates that keyboard input should be used\&.
-.RE
-.PP
-\-s \fIname\fR
-.RS 4
-(\fBddns\-confgen\fR
-only\&.) Generate configuration example to allow dynamic updates of a single hostname\&. The example
-\fBnamed\&.conf\fR
-text shows how to set an update policy for the specified
-\fIname\fR
-using the "name" nametype\&. The default key name is ddns\-key\&.\fIname\fR\&. Note that the "self" nametype cannot be used, since the name to be updated may differ from the key name\&. This option cannot be used with the
-\fB\-z\fR
-option\&.
-.RE
-.PP
-\-z \fIzone\fR
-.RS 4
-(\fBddns\-confgen\fR
-only\&.) Generate configuration example to allow dynamic updates of a zone: The example
-\fBnamed\&.conf\fR
-text shows how to set an update policy for the specified
-\fIzone\fR
-using the "zonesub" nametype, allowing updates to all subdomain names within that
-\fIzone\fR\&. This option cannot be used with the
-\fB\-s\fR
-option\&.
-.RE
-.SH "SEE ALSO"
-.PP
-\fBnsupdate\fR(1),
-\fBnamed.conf\fR(5),
-\fBnamed\fR(8),
-BIND 9 Administrator Reference Manual\&.
-.SH "AUTHOR"
-.PP
-\fBInternet Systems Consortium, Inc\&.\fR
-.SH "COPYRIGHT"
-.br
-Copyright \(co 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
-.br

bin/confgen/ddns-confgen.c

@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2009, 2011, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/*! \file */
-
-/**
- * ddns-confgen generates configuration files for dynamic DNS. It can
- * be used as a convenient alternative to writing the ddns.key file
- * and the corresponding key and update-policy statements in named.conf.
- */
-
-#include <config.h>
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include <isc/assertions.h>
-#include <isc/base64.h>
-#include <isc/buffer.h>
-#include <isc/commandline.h>
-#include <isc/entropy.h>
-#include <isc/file.h>
-#include <isc/keyboard.h>
-#include <isc/mem.h>
-#include <isc/net.h>
-#include <isc/print.h>
-#include <isc/result.h>
-#include <isc/string.h>
-#include <isc/time.h>
-#include <isc/util.h>
-
-#ifdef PKCS11CRYPTO
-#include <pk11/result.h>
-#endif
-
-#include <dns/keyvalues.h>
-#include <dns/name.h>
-#include <dns/result.h>
-
-#include <dst/dst.h>
-#include <confgen/os.h>
-
-#include "util.h"
-#include "keygen.h"
-
-#define KEYGEN_DEFAULT		"tsig-key"
-#define CONFGEN_DEFAULT		"ddns-key"
-
-static char program[256];
-const char *progname;
-static enum { progmode_keygen, progmode_confgen} progmode;
-isc_boolean_t verbose = ISC_FALSE; /* needed by util.c but not used here */
-
-ISC_PLATFORM_NORETURN_PRE static void
-usage(int status) ISC_PLATFORM_NORETURN_POST;
-
-static void
-usage(int status) {
-	if (progmode == progmode_confgen) {
-		fprintf(stderr, "\
-Usage:\n\
- %s [-a alg] [-k keyname] [-r randomfile] [-q] [-s name | -z zone]\n\
-  -a alg:        algorithm (default hmac-sha256)\n\
-  -k keyname:    name of the key as it will be used in named.conf\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n\
-  -s name:       domain name to be updated using the created key\n\
-  -z zone:       name of the zone as it will be used in named.conf\n\
-  -q:            quiet mode: print the key, with no explanatory text\n",
-			 progname);
-	} else {
-		fprintf(stderr, "\
-Usage:\n\
- %s [-a alg] [-r randomfile] [keyname]\n\
-  -a alg:        algorithm (default hmac-sha256)\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n",
-			 progname);
-	}
-
-	exit (status);
-}
-
-int
-main(int argc, char **argv) {
-	isc_result_t result = ISC_R_SUCCESS;
-	isc_boolean_t show_final_mem = ISC_FALSE;
-	isc_boolean_t quiet = ISC_FALSE;
-	isc_buffer_t key_txtbuffer;
-	char key_txtsecret[256];
-	isc_mem_t *mctx = NULL;
-	const char *randomfile = NULL;
-	const char *keyname = NULL;
-	const char *zone = NULL;
-	const char *self_domain = NULL;
-	char *keybuf = NULL;
-	dns_secalg_t alg = DST_ALG_HMACSHA256;
-	const char *algname;
-	int keysize = 256;
-	int len = 0;
-	int ch;
-
-#ifdef PKCS11CRYPTO
-	pk11_result_register();
-#endif
-	dns_result_register();
-
-	result = isc_file_progname(*argv, program, sizeof(program));
-	if (result != ISC_R_SUCCESS)
-		memmove(program, "tsig-keygen", 11);
-	progname = program;
-
-	/*
-	 * Libtool doesn't preserve the program name prior to final
-	 * installation.  Remove the libtool prefix ("lt-").
-	 */
-	if (strncmp(progname, "lt-", 3) == 0)
-		progname += 3;
-
-#define PROGCMP(X) \
-	(strcasecmp(progname, X) == 0 || strcasecmp(progname, X ".exe") == 0)
-
-	if (PROGCMP("tsig-keygen")) {
-		progmode = progmode_keygen;
-		quiet = ISC_TRUE;
-	} else if (PROGCMP("ddns-confgen"))
-		progmode = progmode_confgen;
-	else
-		INSIST(0);
-
-	isc_commandline_errprint = ISC_FALSE;
-
-	while ((ch = isc_commandline_parse(argc, argv,
-					   "a:hk:Mmr:qs:y:z:")) != -1) {
-		switch (ch) {
-		case 'a':
-			algname = isc_commandline_argument;
-			alg = alg_fromtext(algname);
-			if (alg == DST_ALG_UNKNOWN)
-				fatal("Unsupported algorithm '%s'", algname);
-			keysize = alg_bits(alg);
-			break;
-		case 'h':
-			usage(0);
-		case 'k':
-		case 'y':
-			if (progmode == progmode_confgen)
-				keyname = isc_commandline_argument;
-			else
-				usage(1);
-			break;
-		case 'M':
-			isc_mem_debugging = ISC_MEM_DEBUGTRACE;
-			break;
-		case 'm':
-			show_final_mem = ISC_TRUE;
-			break;
-		case 'q':
-			if (progmode == progmode_confgen)
-				quiet = ISC_TRUE;
-			else
-				usage(1);
-			break;
-		case 'r':
-			randomfile = isc_commandline_argument;
-			break;
-		case 's':
-			if (progmode == progmode_confgen)
-				self_domain = isc_commandline_argument;
-			else
-				usage(1);
-			break;
-		case 'z':
-			if (progmode == progmode_confgen)
-				zone = isc_commandline_argument;
-			else
-				usage(1);
-			break;
-		case '?':
-			if (isc_commandline_option != '?') {
-				fprintf(stderr, "%s: invalid argument -%c\n",
-					program, isc_commandline_option);
-				usage(1);
-			} else
-				usage(0);
-			break;
-		default:
-			fprintf(stderr, "%s: unhandled option -%c\n",
-				program, isc_commandline_option);
-			exit(1);
-		}
-	}
-
-	if (progmode == progmode_keygen)
-		keyname = argv[isc_commandline_index++];
-
-	POST(argv);
-
-	if (self_domain != NULL && zone != NULL)
-		usage(1);	/* -s and -z cannot coexist */
-
-	if (argc > isc_commandline_index)
-		usage(1);
-
-	/* Use canonical algorithm name */
-	algname = alg_totext(alg);
-
-	DO("create memory context", isc_mem_create(0, 0, &mctx));
-
-	if (keyname == NULL) {
-		const char *suffix = NULL;
-
-		keyname = ((progmode == progmode_keygen)
-			?  KEYGEN_DEFAULT
-			: CONFGEN_DEFAULT);
-		if (self_domain != NULL)
-			suffix = self_domain;
-		else if (zone != NULL)
-			suffix = zone;
-		if (suffix != NULL) {
-			len = strlen(keyname) + strlen(suffix) + 2;
-			keybuf = isc_mem_get(mctx, len);
-			if (keybuf == NULL)
-				fatal("failed to allocate memory for keyname");
-			snprintf(keybuf, len, "%s.%s", keyname, suffix);
-			keyname = (const char *) keybuf;
-		}
-	}
-
-	isc_buffer_init(&key_txtbuffer, &key_txtsecret, sizeof(key_txtsecret));
-
-	generate_key(mctx, randomfile, alg, keysize, &key_txtbuffer);
-
-
-	if (!quiet)
-		printf("\
-# To activate this key, place the following in named.conf, and\n\
-# in a separate keyfile on the system or systems from which nsupdate\n\
-# will be run:\n");
-
-	printf("\
-key \"%s\" {\n\
-	algorithm %s;\n\
-	secret \"%.*s\";\n\
-};\n",
-	       keyname, algname,
-	       (int)isc_buffer_usedlength(&key_txtbuffer),
-	       (char *)isc_buffer_base(&key_txtbuffer));
-
-	if (!quiet) {
-		if (self_domain != NULL) {
-			printf("\n\
-# Then, in the \"zone\" statement for the zone containing the\n\
-# name \"%s\", place an \"update-policy\" statement\n\
-# like this one, adjusted as needed for your preferred permissions:\n\
-update-policy {\n\
-	  grant %s name %s ANY;\n\
-};\n",
-			       self_domain, keyname, self_domain);
-		} else if (zone != NULL) {
-			printf("\n\
-# Then, in the \"zone\" definition statement for \"%s\",\n\
-# place an \"update-policy\" statement like this one, adjusted as \n\
-# needed for your preferred permissions:\n\
-update-policy {\n\
-	  grant %s zonesub ANY;\n\
-};\n",
-			       zone, keyname);
-		} else {
-			printf("\n\
-# Then, in the \"zone\" statement for each zone you wish to dynamically\n\
-# update, place an \"update-policy\" statement granting update permission\n\
-# to this key.  For example, the following statement grants this key\n\
-# permission to update any name within the zone:\n\
-update-policy {\n\
-	grant %s zonesub ANY;\n\
-};\n",
-			       keyname);
-		}
-
-		printf("\n\
-# After the keyfile has been placed, the following command will\n\
-# execute nsupdate using this key:\n\
-nsupdate -k <keyfile>\n");
-
-	}
-
-	if (keybuf != NULL)
-		isc_mem_put(mctx, keybuf, len);
-
-	if (show_final_mem)
-		isc_mem_stats(mctx, stderr);
-
-	isc_mem_destroy(&mctx);
-
-	return (0);
-}

bin/confgen/ddns-confgen.docbook

@@ -1,225 +0,0 @@
-<!--
- - Copyright (C) 2009, 2014-2016  Internet Systems Consortium, Inc. ("ISC")
- -
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
--->
-
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.ddns-confgen">
-  <info>
-    <date>2014-03-06</date>
-  </info>
-  <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle><application>ddns-confgen</application></refentrytitle>
-    <manvolnum>8</manvolnum>
-    <refmiscinfo>BIND9</refmiscinfo>
-  </refmeta>
-
-  <refnamediv>
-    <refname><application>ddns-confgen</application></refname>
-    <refpurpose>ddns key generation tool</refpurpose>
-  </refnamediv>
-
-  <docinfo>
-    <copyright>
-      <year>2009</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
-    </copyright>
-  </docinfo>
-
-  <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
-      <command>tsig-keygen</command>
-      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat">name</arg>
-    </cmdsynopsis>
-    <cmdsynopsis sepchar=" ">
-      <command>ddns-confgen</command>
-      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <group choice="opt" rep="norepeat">
-        <arg choice="plain" rep="norepeat">-s <replaceable class="parameter">name</replaceable></arg>
-        <arg choice="plain" rep="norepeat">-z <replaceable class="parameter">zone</replaceable></arg>
-      </group>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-
-  <refsection><info><title>DESCRIPTION</title></info>
-
-    <para>
-      <command>tsig-keygen</command> and <command>ddns-confgen</command>
-      are invocation methods for a utility that generates keys for use
-      in TSIG signing.  The resulting keys can be used, for example,
-      to secure dynamic DNS updates to a zone or for the
-      <command>rndc</command> command channel.
-    </para>
-
-    <para>
-      When run as <command>tsig-keygen</command>, a domain name
-      can be specified on the command line which will be used as
-      the name of the generated key.  If no name is specified,
-      the default is <constant>tsig-key</constant>.
-    </para>
-
-    <para>
-      When run as <command>ddns-confgen</command>, the generated
-      key is accompanied by configuration text and instructions
-      that can be used with <command>nsupdate</command> and
-      <command>named</command> when setting up dynamic DNS,
-      including an example <command>update-policy</command>
-      statement.  (This usage similar to the
-      <command>rndc-confgen</command> command for setting
-      up command channel security.)
-    </para>
-
-    <para>
-      Note that <command>named</command> itself can configure a
-      local DDNS key for use with <command>nsupdate -l</command>:
-      it does this when a zone is configured with
-      <command>update-policy local;</command>.
-      <command>ddns-confgen</command> is only needed when a
-      more elaborate configuration is required: for instance,
-      if <command>nsupdate</command> is to be used from a remote
-      system.
-    </para>
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
-
-
-    <variablelist>
-      <varlistentry>
-	<term>-a <replaceable class="parameter">algorithm</replaceable></term>
-	<listitem>
-	  <para>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
-            Options are case-insensitive, and the "hmac-" prefix
-            may be omitted.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-h</term>
-	<listitem>
-	  <para>
-	    Prints a short summary of options and arguments.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-k <replaceable class="parameter">keyname</replaceable></term>
-	<listitem>
-	  <para>
-	    Specifies the key name of the DDNS authentication key.
-	    The default is <constant>ddns-key</constant> when neither
-	    the <option>-s</option> nor <option>-z</option> option is
-	    specified; otherwise, the default
-	    is <constant>ddns-key</constant> as a separate label
-	    followed by the argument of the option, e.g.,
-	    <constant>ddns-key.example.com.</constant>
-	    The key name must have the format of a valid domain name,
-	    consisting of letters, digits, hyphens and periods.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-q</term>
-	<listitem>
-	  <para>
-	    (<command>ddns-confgen</command> only.) Quiet mode:  Print
-            only the key, with no explanatory text or usage examples;
-            This is essentially identical to <command>tsig-keygen</command>.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-r <replaceable class="parameter">randomfile</replaceable></term>
-	<listitem>
-	  <para>
-            Specifies a source of random data for generating the
-            authorization.  If the operating system does not provide a
-            <filename>/dev/random</filename> or equivalent device, the
-            default source of randomness is keyboard input.
-            <filename>randomdev</filename> specifies the name of a
-            character device or file containing random data to be used
-            instead of the default.  The special value
-            <filename>keyboard</filename> indicates that keyboard input
-            should be used.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-s <replaceable class="parameter">name</replaceable></term>
-	<listitem>
-	  <para>
-            (<command>ddns-confgen</command> only.)
-	    Generate configuration example to allow dynamic updates
-            of a single hostname.  The example <command>named.conf</command>
-            text shows how to set an update policy for the specified
-            <replaceable class="parameter">name</replaceable>
-	    using the "name" nametype.  The default key name is
-	    ddns-key.<replaceable class="parameter">name</replaceable>.
-	    Note that the "self" nametype cannot be used, since
-	    the name to be updated may differ from the key name.
-	    This option cannot be used with the <option>-z</option> option.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-z <replaceable class="parameter">zone</replaceable></term>
-	<listitem>
-	  <para>
-            (<command>ddns-confgen</command> only.)
-	    Generate configuration example to allow dynamic updates
-            of a zone:  The example <command>named.conf</command> text
-            shows how to set an update policy for the specified
-	    <replaceable class="parameter">zone</replaceable>
-	    using the "zonesub" nametype, allowing updates to
-            all subdomain names within that
-            <replaceable class="parameter">zone</replaceable>.
-	    This option cannot be used with the <option>-s</option> option.
-	  </para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
-
-    <para><citerefentry>
-	<refentrytitle>nsupdate</refentrytitle><manvolnum>1</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-	<refentrytitle>named.conf</refentrytitle><manvolnum>5</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-	<refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
-      <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
-    </para>
-  </refsection>
-
-</refentry>

bin/confgen/ddns-confgen.html

@@ -1,202 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<!--
- - Copyright (C) 2009, 2014-2016 Internet Systems Consortium, Inc. ("ISC")
- - 
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
--->
-<html lang="en">
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title>ddns-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
-</head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
-<a name="man.ddns-confgen"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  <div class="refnamediv">
-<h2>Name</h2>
-<p>
-    <span class="application">ddns-confgen</span>
-     &#8212; ddns key generation tool
-  </p>
-</div>
-
-  
-
-  <div class="refsynopsisdiv">
-<h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">tsig-keygen</code> 
-       [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [name]
-    </p></div>
-    <div class="cmdsynopsis"><p>
-      <code class="command">ddns-confgen</code> 
-       [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [
-         -s <em class="replaceable"><code>name</code></em> 
-         |   -z <em class="replaceable"><code>zone</code></em> 
-      ]
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p>
-      <span class="command"><strong>tsig-keygen</strong></span> and <span class="command"><strong>ddns-confgen</strong></span>
-      are invocation methods for a utility that generates keys for use
-      in TSIG signing.  The resulting keys can be used, for example,
-      to secure dynamic DNS updates to a zone or for the
-      <span class="command"><strong>rndc</strong></span> command channel.
-    </p>
-
-    <p>
-      When run as <span class="command"><strong>tsig-keygen</strong></span>, a domain name
-      can be specified on the command line which will be used as
-      the name of the generated key.  If no name is specified,
-      the default is <code class="constant">tsig-key</code>.
-    </p>
-
-    <p>
-      When run as <span class="command"><strong>ddns-confgen</strong></span>, the generated
-      key is accompanied by configuration text and instructions
-      that can be used with <span class="command"><strong>nsupdate</strong></span> and
-      <span class="command"><strong>named</strong></span> when setting up dynamic DNS,
-      including an example <span class="command"><strong>update-policy</strong></span>
-      statement.  (This usage similar to the
-      <span class="command"><strong>rndc-confgen</strong></span> command for setting
-      up command channel security.)
-    </p>
-
-    <p>
-      Note that <span class="command"><strong>named</strong></span> itself can configure a
-      local DDNS key for use with <span class="command"><strong>nsupdate -l</strong></span>:
-      it does this when a zone is configured with
-      <span class="command"><strong>update-policy local;</strong></span>.
-      <span class="command"><strong>ddns-confgen</strong></span> is only needed when a
-      more elaborate configuration is required: for instance,
-      if <span class="command"><strong>nsupdate</strong></span> is to be used from a remote
-      system.
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
-<dt><span class="term">-a <em class="replaceable"><code>algorithm</code></em></span></dt>
-<dd>
-	  <p>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
-            Options are case-insensitive, and the "hmac-" prefix
-            may be omitted.
-	  </p>
-	</dd>
-<dt><span class="term">-h</span></dt>
-<dd>
-	  <p>
-	    Prints a short summary of options and arguments.
-	  </p>
-	</dd>
-<dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd>
-	  <p>
-	    Specifies the key name of the DDNS authentication key.
-	    The default is <code class="constant">ddns-key</code> when neither
-	    the <code class="option">-s</code> nor <code class="option">-z</code> option is
-	    specified; otherwise, the default
-	    is <code class="constant">ddns-key</code> as a separate label
-	    followed by the argument of the option, e.g.,
-	    <code class="constant">ddns-key.example.com.</code>
-	    The key name must have the format of a valid domain name,
-	    consisting of letters, digits, hyphens and periods.
-	  </p>
-	</dd>
-<dt><span class="term">-q</span></dt>
-<dd>
-	  <p>
-	    (<span class="command"><strong>ddns-confgen</strong></span> only.) Quiet mode:  Print
-            only the key, with no explanatory text or usage examples;
-            This is essentially identical to <span class="command"><strong>tsig-keygen</strong></span>.
-	  </p>
-	</dd>
-<dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd>
-	  <p>
-            Specifies a source of random data for generating the
-            authorization.  If the operating system does not provide a
-            <code class="filename">/dev/random</code> or equivalent device, the
-            default source of randomness is keyboard input.
-            <code class="filename">randomdev</code> specifies the name of a
-            character device or file containing random data to be used
-            instead of the default.  The special value
-            <code class="filename">keyboard</code> indicates that keyboard input
-            should be used.
-	  </p>
-	</dd>
-<dt><span class="term">-s <em class="replaceable"><code>name</code></em></span></dt>
-<dd>
-	  <p>
-            (<span class="command"><strong>ddns-confgen</strong></span> only.)
-	    Generate configuration example to allow dynamic updates
-            of a single hostname.  The example <span class="command"><strong>named.conf</strong></span>
-            text shows how to set an update policy for the specified
-            <em class="replaceable"><code>name</code></em>
-	    using the "name" nametype.  The default key name is
-	    ddns-key.<em class="replaceable"><code>name</code></em>.
-	    Note that the "self" nametype cannot be used, since
-	    the name to be updated may differ from the key name.
-	    This option cannot be used with the <code class="option">-z</code> option.
-	  </p>
-	</dd>
-<dt><span class="term">-z <em class="replaceable"><code>zone</code></em></span></dt>
-<dd>
-	  <p>
-            (<span class="command"><strong>ddns-confgen</strong></span> only.)
-	    Generate configuration example to allow dynamic updates
-            of a zone:  The example <span class="command"><strong>named.conf</strong></span> text
-            shows how to set an update policy for the specified
-	    <em class="replaceable"><code>zone</code></em>
-	    using the "zonesub" nametype, allowing updates to
-            all subdomain names within that
-            <em class="replaceable"><code>zone</code></em>.
-	    This option cannot be used with the <code class="option">-s</code> option.
-	  </p>
-	</dd>
-</dl></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-	<span class="refentrytitle">nsupdate</span>(1)
-      </span>,
-      <span class="citerefentry">
-	<span class="refentrytitle">named.conf</span>(5)
-      </span>,
-      <span class="citerefentry">
-	<span class="refentrytitle">named</span>(8)
-      </span>,
-      <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
-    </p>
-  </div>
-
-</div></body>
-</html>

bin/confgen/include/confgen/os.h

@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: os.h,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-/*! \file */
-
-#ifndef RNDC_OS_H
-#define RNDC_OS_H 1
-
-#include <isc/lang.h>
-#include <stdio.h>
-
-ISC_LANG_BEGINDECLS
-
-int set_user(FILE *fd, const char *user);
-/*%<
- * Set the owner of the file referenced by 'fd' to 'user'.
- * Returns:
- *   0 		success
- *   -1 	insufficient permissions, or 'user' does not exist.
- */
-
-ISC_LANG_ENDDECLS
-
-#endif

bin/confgen/keygen.c

@@ -1,227 +0,0 @@
-/*
- * Copyright (C) 2009, 2012-2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: keygen.c,v 1.4 2009/11/12 14:02:38 marka Exp $ */
-
-/*! \file */
-
-#include <config.h>
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include <isc/base64.h>
-#include <isc/buffer.h>
-#include <isc/entropy.h>
-#include <isc/file.h>
-#include <isc/keyboard.h>
-#include <isc/mem.h>
-#include <isc/print.h>
-#include <isc/result.h>
-#include <isc/string.h>
-
-#include <pk11/site.h>
-
-#include <dns/keyvalues.h>
-#include <dns/name.h>
-
-#include <dst/dst.h>
-#include <confgen/os.h>
-
-#include "util.h"
-#include "keygen.h"
-
-/*%
- * Convert algorithm type to string.
- */
-const char *
-alg_totext(dns_secalg_t alg) {
-	switch (alg) {
-#ifndef PK11_MD5_DISABLE
-	    case DST_ALG_HMACMD5:
-		return "hmac-md5";
-#endif
-	    case DST_ALG_HMACSHA1:
-		return "hmac-sha1";
-	    case DST_ALG_HMACSHA224:
-		return "hmac-sha224";
-	    case DST_ALG_HMACSHA256:
-		return "hmac-sha256";
-	    case DST_ALG_HMACSHA384:
-		return "hmac-sha384";
-	    case DST_ALG_HMACSHA512:
-		return "hmac-sha512";
-	    default:
-		return "(unknown)";
-	}
-}
-
-/*%
- * Convert string to algorithm type.
- */
-dns_secalg_t
-alg_fromtext(const char *name) {
-	const char *p = name;
-	if (strncasecmp(p, "hmac-", 5) == 0)
-		p = &name[5];
-
-#ifndef PK11_MD5_DISABLE
-	if (strcasecmp(p, "md5") == 0)
-		return DST_ALG_HMACMD5;
-#endif
-	if (strcasecmp(p, "sha1") == 0)
-		return DST_ALG_HMACSHA1;
-	if (strcasecmp(p, "sha224") == 0)
-		return DST_ALG_HMACSHA224;
-	if (strcasecmp(p, "sha256") == 0)
-		return DST_ALG_HMACSHA256;
-	if (strcasecmp(p, "sha384") == 0)
-		return DST_ALG_HMACSHA384;
-	if (strcasecmp(p, "sha512") == 0)
-		return DST_ALG_HMACSHA512;
-	return DST_ALG_UNKNOWN;
-}
-
-/*%
- * Return default keysize for a given algorithm type.
- */
-int
-alg_bits(dns_secalg_t alg) {
-	switch (alg) {
-	    case DST_ALG_HMACMD5:
-		return 128;
-	    case DST_ALG_HMACSHA1:
-		return 160;
-	    case DST_ALG_HMACSHA224:
-		return 224;
-	    case DST_ALG_HMACSHA256:
-		return 256;
-	    case DST_ALG_HMACSHA384:
-		return 384;
-	    case DST_ALG_HMACSHA512:
-		return 512;
-	    default:
-		return 0;
-	}
-}
-
-/*%
- * Generate a key of size 'keysize' using entropy source 'randomfile',
- * and place it in 'key_txtbuffer'
- */
-void
-generate_key(isc_mem_t *mctx, const char *randomfile, dns_secalg_t alg,
-	     int keysize, isc_buffer_t *key_txtbuffer) {
-	isc_result_t result = ISC_R_SUCCESS;
-	isc_entropysource_t *entropy_source = NULL;
-	int open_keyboard = ISC_ENTROPY_KEYBOARDMAYBE;
-	int entropy_flags = 0;
-	isc_entropy_t *ectx = NULL;
-	isc_buffer_t key_rawbuffer;
-	isc_region_t key_rawregion;
-	char key_rawsecret[64];
-	dst_key_t *key = NULL;
-
-	switch (alg) {
-#ifndef PK11_MD5_DISABLE
-	    case DST_ALG_HMACMD5:
-#endif
-	    case DST_ALG_HMACSHA1:
-	    case DST_ALG_HMACSHA224:
-	    case DST_ALG_HMACSHA256:
-		if (keysize < 1 || keysize > 512)
-			fatal("keysize %d out of range (must be 1-512)\n",
-			      keysize);
-		break;
-	    case DST_ALG_HMACSHA384:
-	    case DST_ALG_HMACSHA512:
-		if (keysize < 1 || keysize > 1024)
-			fatal("keysize %d out of range (must be 1-1024)\n",
-			      keysize);
-		break;
-	    default:
-		fatal("unsupported algorithm %d\n", alg);
-	}
-
-
-	DO("create entropy context", isc_entropy_create(mctx, &ectx));
-
-	if (randomfile != NULL && strcmp(randomfile, "keyboard") == 0) {
-		randomfile = NULL;
-		open_keyboard = ISC_ENTROPY_KEYBOARDYES;
-	}
-	DO("start entropy source", isc_entropy_usebestsource(ectx,
-							     &entropy_source,
-							     randomfile,
-							     open_keyboard));
-
-	entropy_flags = ISC_ENTROPY_BLOCKING | ISC_ENTROPY_GOODONLY;
-
-	DO("initialize dst library", dst_lib_init(mctx, ectx, entropy_flags));
-
-	DO("generate key", dst_key_generate(dns_rootname, alg,
-					    keysize, 0, 0,
-					    DNS_KEYPROTO_ANY,
-					    dns_rdataclass_in, mctx, &key));
-
-	isc_buffer_init(&key_rawbuffer, &key_rawsecret, sizeof(key_rawsecret));
-
-	DO("dump key to buffer", dst_key_tobuffer(key, &key_rawbuffer));
-
-	isc_buffer_usedregion(&key_rawbuffer, &key_rawregion);
-
-	DO("bsse64 encode secret", isc_base64_totext(&key_rawregion, -1, "",
-						     key_txtbuffer));
-
-	/*
-	 * Shut down the entropy source now so the "stop typing" message
-	 * does not muck with the output.
-	 */
-	if (entropy_source != NULL)
-		isc_entropy_destroysource(&entropy_source);
-
-	if (key != NULL)
-		dst_key_free(&key);
-
-	isc_entropy_detach(&ectx);
-	dst_lib_destroy();
-}
-
-/*%
- * Write a key file to 'keyfile'.  If 'user' is non-NULL,
- * make that user the owner of the file.  The key will have
- * the name 'keyname' and the secret in the buffer 'secret'.
- */
-void
-write_key_file(const char *keyfile, const char *user,
-	       const char *keyname, isc_buffer_t *secret,
-	       dns_secalg_t alg) {
-	isc_result_t result;
-	const char *algname = alg_totext(alg);
-	FILE *fd = NULL;
-
-	DO("create keyfile", isc_file_safecreate(keyfile, &fd));
-
-	if (user != NULL) {
-		if (set_user(fd, user) == -1)
-			fatal("unable to set file owner\n");
-	}
-
-	fprintf(fd, "key \"%s\" {\n\talgorithm %s;\n"
-		"\tsecret \"%.*s\";\n};\n",
-		keyname, algname,
-		(int)isc_buffer_usedlength(secret),
-		(char *)isc_buffer_base(secret));
-	fflush(fd);
-	if (ferror(fd))
-		fatal("write to %s failed\n", keyfile);
-	if (fclose(fd))
-		fatal("fclose(%s) failed\n", keyfile);
-	fprintf(stderr, "wrote key file \"%s\"\n", keyfile);
-}
-

bin/confgen/keygen.h

@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: keygen.h,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-#ifndef RNDC_KEYGEN_H
-#define RNDC_KEYGEN_H 1
-
-/*! \file */
-
-#include <isc/lang.h>
-
-ISC_LANG_BEGINDECLS
-
-void generate_key(isc_mem_t *mctx, const char *randomfile, dns_secalg_t alg,
-		  int keysize, isc_buffer_t *key_txtbuffer);
-
-void write_key_file(const char *keyfile, const char *user,
-		    const char *keyname, isc_buffer_t *secret,
-		    dns_secalg_t alg);
-
-const char *alg_totext(dns_secalg_t alg);
-dns_secalg_t alg_fromtext(const char *name);
-int alg_bits(dns_secalg_t alg);
-
-ISC_LANG_ENDDECLS
-
-#endif /* RNDC_KEYGEN_H */

bin/confgen/rndc-confgen.8

@@ -1,221 +0,0 @@
-.\" Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016 Internet Systems Consortium, Inc. ("ISC")
-.\" 
-.\" This Source Code Form is subject to the terms of the Mozilla Public
-.\" License, v. 2.0. If a copy of the MPL was not distributed with this
-.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
-.\"
-.hy 0
-.ad l
-'\" t
-.\"     Title: rndc-confgen
-.\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2013-03-14
-.\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
-.\"
-.TH "RNDC\-CONFGEN" "8" "2013\-03\-14" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
-.SH "NAME"
-rndc-confgen \- rndc key generation tool
-.SH "SYNOPSIS"
-.HP \w'\fBrndc\-confgen\fR\ 'u
-\fBrndc\-confgen\fR [\fB\-a\fR] [\fB\-A\ \fR\fB\fIalgorithm\fR\fR] [\fB\-b\ \fR\fB\fIkeysize\fR\fR] [\fB\-c\ \fR\fB\fIkeyfile\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-p\ \fR\fB\fIport\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\fB\-s\ \fR\fB\fIaddress\fR\fR] [\fB\-t\ \fR\fB\fIchrootdir\fR\fR] [\fB\-u\ \fR\fB\fIuser\fR\fR]
-.SH "DESCRIPTION"
-.PP
-\fBrndc\-confgen\fR
-generates configuration files for
-\fBrndc\fR\&. It can be used as a convenient alternative to writing the
-rndc\&.conf
-file and the corresponding
-\fBcontrols\fR
-and
-\fBkey\fR
-statements in
-named\&.conf
-by hand\&. Alternatively, it can be run with the
-\fB\-a\fR
-option to set up a
-rndc\&.key
-file and avoid the need for a
-rndc\&.conf
-file and a
-\fBcontrols\fR
-statement altogether\&.
-.SH "OPTIONS"
-.PP
-\-a
-.RS 4
-Do automatic
-\fBrndc\fR
-configuration\&. This creates a file
-rndc\&.key
-in
-/etc
-(or whatever
-\fIsysconfdir\fR
-was specified as when
-BIND
-was built) that is read by both
-\fBrndc\fR
-and
-\fBnamed\fR
-on startup\&. The
-rndc\&.key
-file defines a default command channel and authentication key allowing
-\fBrndc\fR
-to communicate with
-\fBnamed\fR
-on the local host with no further configuration\&.
-.sp
-Running
-\fBrndc\-confgen \-a\fR
-allows BIND 9 and
-\fBrndc\fR
-to be used as drop\-in replacements for BIND 8 and
-\fBndc\fR, with no changes to the existing BIND 8
-named\&.conf
-file\&.
-.sp
-If a more elaborate configuration than that generated by
-\fBrndc\-confgen \-a\fR
-is required, for example if rndc is to be used remotely, you should run
-\fBrndc\-confgen\fR
-without the
-\fB\-a\fR
-option and set up a
-rndc\&.conf
-and
-named\&.conf
-as directed\&.
-.RE
-.PP
-\-A \fIalgorithm\fR
-.RS 4
-Specifies the algorithm to use for the TSIG key\&. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512\&. The default is hmac\-md5 or if MD5 was disabled hmac\-sha256\&.
-.RE
-.PP
-\-b \fIkeysize\fR
-.RS 4
-Specifies the size of the authentication key in bits\&. Must be between 1 and 512 bits; the default is the hash size\&.
-.RE
-.PP
-\-c \fIkeyfile\fR
-.RS 4
-Used with the
-\fB\-a\fR
-option to specify an alternate location for
-rndc\&.key\&.
-.RE
-.PP
-\-h
-.RS 4
-Prints a short summary of the options and arguments to
-\fBrndc\-confgen\fR\&.
-.RE
-.PP
-\-k \fIkeyname\fR
-.RS 4
-Specifies the key name of the rndc authentication key\&. This must be a valid domain name\&. The default is
-\fBrndc\-key\fR\&.
-.RE
-.PP
-\-p \fIport\fR
-.RS 4
-Specifies the command channel port where
-\fBnamed\fR
-listens for connections from
-\fBrndc\fR\&. The default is 953\&.
-.RE
-.PP
-\-r \fIrandomfile\fR
-.RS 4
-Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
-/dev/random
-or equivalent device, the default source of randomness is keyboard input\&.
-randomdev
-specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
-keyboard
-indicates that keyboard input should be used\&.
-.RE
-.PP
-\-s \fIaddress\fR
-.RS 4
-Specifies the IP address where
-\fBnamed\fR
-listens for command channel connections from
-\fBrndc\fR\&. The default is the loopback address 127\&.0\&.0\&.1\&.
-.RE
-.PP
-\-t \fIchrootdir\fR
-.RS 4
-Used with the
-\fB\-a\fR
-option to specify a directory where
-\fBnamed\fR
-will run chrooted\&. An additional copy of the
-rndc\&.key
-will be written relative to this directory so that it will be found by the chrooted
-\fBnamed\fR\&.
-.RE
-.PP
-\-u \fIuser\fR
-.RS 4
-Used with the
-\fB\-a\fR
-option to set the owner of the
-rndc\&.key
-file generated\&. If
-\fB\-t\fR
-is also specified only the file in the chroot area has its owner changed\&.
-.RE
-.SH "EXAMPLES"
-.PP
-To allow
-\fBrndc\fR
-to be used with no manual configuration, run
-.PP
-\fBrndc\-confgen \-a\fR
-.PP
-To print a sample
-rndc\&.conf
-file and corresponding
-\fBcontrols\fR
-and
-\fBkey\fR
-statements to be manually inserted into
-named\&.conf, run
-.PP
-\fBrndc\-confgen\fR
-.SH "SEE ALSO"
-.PP
-\fBrndc\fR(8),
-\fBrndc.conf\fR(5),
-\fBnamed\fR(8),
-BIND 9 Administrator Reference Manual\&.
-.SH "AUTHOR"
-.PP
-\fBInternet Systems Consortium, Inc\&.\fR
-.SH "COPYRIGHT"
-.br
-Copyright \(co 2001, 2003-2005, 2007, 2009, 2013-2016 Internet Systems Consortium, Inc. ("ISC")
-.br

bin/confgen/rndc-confgen.c

@@ -1,295 +0,0 @@
-/*
- * Copyright (C) 2001, 2003-2005, 2007-2009, 2011, 2013, 2014, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: rndc-confgen.c,v 1.7 2011/03/12 04:59:46 tbox Exp $ */
-
-/*! \file */
-
-/**
- * rndc-confgen generates configuration files for rndc. It can be used
- * as a convenient alternative to writing the rndc.conf file and the
- * corresponding controls and key statements in named.conf by hand.
- * Alternatively, it can be run with the -a option to set up a
- * rndc.key file and avoid the need for a rndc.conf file and a
- * controls statement altogether.
- */
-
-#include <config.h>
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include <isc/assertions.h>
-#include <isc/base64.h>
-#include <isc/buffer.h>
-#include <isc/commandline.h>
-#include <isc/entropy.h>
-#include <isc/file.h>
-#include <isc/keyboard.h>
-#include <isc/mem.h>
-#include <isc/net.h>
-#include <isc/print.h>
-#include <isc/result.h>
-#include <isc/string.h>
-#include <isc/time.h>
-#include <isc/util.h>
-
-#include <pk11/site.h>
-
-#include <dns/keyvalues.h>
-#include <dns/name.h>
-
-#include <dst/dst.h>
-#include <confgen/os.h>
-
-#include "util.h"
-#include "keygen.h"
-
-#define DEFAULT_KEYNAME		"rndc-key"
-#define DEFAULT_SERVER		"127.0.0.1"
-#define DEFAULT_PORT		953
-
-static char program[256];
-const char *progname;
-
-isc_boolean_t verbose = ISC_FALSE;
-
-const char *keyfile, *keydef;
-
-ISC_PLATFORM_NORETURN_PRE static void
-usage(int status) ISC_PLATFORM_NORETURN_POST;
-
-static void
-usage(int status) {
-
-#ifndef PK11_MD5_DISABLE
-	fprintf(stderr, "\
-Usage:\n\
- %s [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-r randomfile] \
-[-s addr] [-t chrootdir] [-u user]\n\
-  -a:		 generate just the key clause and write it to keyfile (%s)\n\
-  -A alg:	 algorithm (default hmac-md5)\n\
-  -b bits:	 from 1 through 512, default 256; total length of the secret\n\
-  -c keyfile:	 specify an alternate key file (requires -a)\n\
-  -k keyname:	 the name as it will be used  in named.conf and rndc.conf\n\
-  -p port:	 the port named will listen on and rndc will connect to\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n\
-  -s addr:	 the address to which rndc should connect\n\
-  -t chrootdir:	 write a keyfile in chrootdir as well (requires -a)\n\
-  -u user:	 set the keyfile owner to \"user\" (requires -a)\n",
-		 progname, keydef);
-#else
-	fprintf(stderr, "\
-Usage:\n\
- %s [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-r randomfile] \
-[-s addr] [-t chrootdir] [-u user]\n\
-  -a:		 generate just the key clause and write it to keyfile (%s)\n\
-  -A alg:	 algorithm (default hmac-sha256)\n\
-  -b bits:	 from 1 through 512, default 256; total length of the secret\n\
-  -c keyfile:	 specify an alternate key file (requires -a)\n\
-  -k keyname:	 the name as it will be used  in named.conf and rndc.conf\n\
-  -p port:	 the port named will listen on and rndc will connect to\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n\
-  -s addr:	 the address to which rndc should connect\n\
-  -t chrootdir:	 write a keyfile in chrootdir as well (requires -a)\n\
-  -u user:	 set the keyfile owner to \"user\" (requires -a)\n",
-		 progname, keydef);
-#endif
-
-	exit (status);
-}
-
-int
-main(int argc, char **argv) {
-	isc_boolean_t show_final_mem = ISC_FALSE;
-	isc_buffer_t key_txtbuffer;
-	char key_txtsecret[256];
-	isc_mem_t *mctx = NULL;
-	isc_result_t result = ISC_R_SUCCESS;
-	const char *keyname = NULL;
-	const char *randomfile = NULL;
-	const char *serveraddr = NULL;
-	dns_secalg_t alg;
-	const char *algname;
-	char *p;
-	int ch;
-	int port;
-	int keysize = -1;
-	struct in_addr addr4_dummy;
-	struct in6_addr addr6_dummy;
-	char *chrootdir = NULL;
-	char *user = NULL;
-	isc_boolean_t keyonly = ISC_FALSE;
-	int len;
-
-	keydef = keyfile = RNDC_KEYFILE;
-
-	result = isc_file_progname(*argv, program, sizeof(program));
-	if (result != ISC_R_SUCCESS)
-		memmove(program, "rndc-confgen", 13);
-	progname = program;
-
-	keyname = DEFAULT_KEYNAME;
-#ifndef PK11_MD5_DISABLE
-	alg = DST_ALG_HMACMD5;
-#else
-	alg = DST_ALG_HMACSHA256;
-#endif
-	serveraddr = DEFAULT_SERVER;
-	port = DEFAULT_PORT;
-
-	isc_commandline_errprint = ISC_FALSE;
-
-	while ((ch = isc_commandline_parse(argc, argv,
-					   "aA:b:c:hk:Mmp:r:s:t:u:Vy")) != -1)
-	{
-		switch (ch) {
-		case 'a':
-			keyonly = ISC_TRUE;
-			break;
-		case 'A':
-			algname = isc_commandline_argument;
-			alg = alg_fromtext(algname);
-			if (alg == DST_ALG_UNKNOWN)
-				fatal("Unsupported algorithm '%s'", algname);
-			break;
-		case 'b':
-			keysize = strtol(isc_commandline_argument, &p, 10);
-			if (*p != '\0' || keysize < 0)
-				fatal("-b requires a non-negative number");
-			break;
-		case 'c':
-			keyfile = isc_commandline_argument;
-			break;
-		case 'h':
-			usage(0);
-		case 'k':
-		case 'y':	/* Compatible with rndc -y. */
-			keyname = isc_commandline_argument;
-			break;
-		case 'M':
-			isc_mem_debugging = ISC_MEM_DEBUGTRACE;
-			break;
-
-		case 'm':
-			show_final_mem = ISC_TRUE;
-			break;
-		case 'p':
-			port = strtol(isc_commandline_argument, &p, 10);
-			if (*p != '\0' || port < 0 || port > 65535)
-				fatal("port '%s' out of range",
-				      isc_commandline_argument);
-			break;
-		case 'r':
-			randomfile = isc_commandline_argument;
-			break;
-		case 's':
-			serveraddr = isc_commandline_argument;
-			if (inet_pton(AF_INET, serveraddr, &addr4_dummy) != 1 &&
-			    inet_pton(AF_INET6, serveraddr, &addr6_dummy) != 1)
-				fatal("-s should be an IPv4 or IPv6 address");
-			break;
-		case 't':
-			chrootdir = isc_commandline_argument;
-			break;
-		case 'u':
-			user = isc_commandline_argument;
-			break;
-		case 'V':
-			verbose = ISC_TRUE;
-			break;
-		case '?':
-			if (isc_commandline_option != '?') {
-				fprintf(stderr, "%s: invalid argument -%c\n",
-					program, isc_commandline_option);
-				usage(1);
-			} else
-				usage(0);
-			break;
-		default:
-			fprintf(stderr, "%s: unhandled option -%c\n",
-				program, isc_commandline_option);
-			exit(1);
-		}
-	}
-
-	argc -= isc_commandline_index;
-	argv += isc_commandline_index;
-	POST(argv);
-
-	if (argc > 0)
-		usage(1);
-
-	if (keysize < 0)
-		keysize = alg_bits(alg);
-	algname = alg_totext(alg);
-
-	DO("create memory context", isc_mem_create(0, 0, &mctx));
-	isc_buffer_init(&key_txtbuffer, &key_txtsecret, sizeof(key_txtsecret));
-
-	generate_key(mctx, randomfile, alg, keysize, &key_txtbuffer);
-
-	if (keyonly) {
-		write_key_file(keyfile, chrootdir == NULL ? user : NULL,
-			       keyname, &key_txtbuffer, alg);
-
-		if (chrootdir != NULL) {
-			char *buf;
-			len = strlen(chrootdir) + strlen(keyfile) + 2;
-			buf = isc_mem_get(mctx, len);
-			if (buf == NULL)
-				fatal("isc_mem_get(%d) failed\n", len);
-			snprintf(buf, len, "%s%s%s", chrootdir,
-				 (*keyfile != '/') ? "/" : "", keyfile);
-
-			write_key_file(buf, user, keyname, &key_txtbuffer, alg);
-			isc_mem_put(mctx, buf, len);
-		}
-	} else {
-		printf("\
-# Start of rndc.conf\n\
-key \"%s\" {\n\
-	algorithm %s;\n\
-	secret \"%.*s\";\n\
-};\n\
-\n\
-options {\n\
-	default-key \"%s\";\n\
-	default-server %s;\n\
-	default-port %d;\n\
-};\n\
-# End of rndc.conf\n\
-\n\
-# Use with the following in named.conf, adjusting the allow list as needed:\n\
-# key \"%s\" {\n\
-# 	algorithm %s;\n\
-# 	secret \"%.*s\";\n\
-# };\n\
-# \n\
-# controls {\n\
-# 	inet %s port %d\n\
-# 		allow { %s; } keys { \"%s\"; };\n\
-# };\n\
-# End of named.conf\n",
-		       keyname, algname,
-		       (int)isc_buffer_usedlength(&key_txtbuffer),
-		       (char *)isc_buffer_base(&key_txtbuffer),
-		       keyname, serveraddr, port,
-		       keyname, algname,
-		       (int)isc_buffer_usedlength(&key_txtbuffer),
-		       (char *)isc_buffer_base(&key_txtbuffer),
-		       serveraddr, port, serveraddr, keyname);
-	}
-
-	if (show_final_mem)
-		isc_mem_stats(mctx, stderr);
-
-	isc_mem_destroy(&mctx);
-
-	return (0);
-}

bin/confgen/rndc-confgen.docbook

@@ -1,284 +0,0 @@
-<!--
- - Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016  Internet Systems Consortium, Inc. ("ISC")
- -
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
--->
-
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.rndc-confgen">
-  <info>
-    <date>2013-03-14</date>
-  </info>
-  <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle><application>rndc-confgen</application></refentrytitle>
-    <manvolnum>8</manvolnum>
-    <refmiscinfo>BIND9</refmiscinfo>
-  </refmeta>
-
-  <refnamediv>
-    <refname><application>rndc-confgen</application></refname>
-    <refpurpose>rndc key generation tool</refpurpose>
-  </refnamediv>
-
-  <docinfo>
-    <copyright>
-      <year>2001</year>
-      <year>2003</year>
-      <year>2004</year>
-      <year>2005</year>
-      <year>2007</year>
-      <year>2009</year>
-      <year>2013</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
-    </copyright>
-  </docinfo>
-
-  <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
-      <command>rndc-confgen</command>
-      <arg choice="opt" rep="norepeat"><option>-a</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-A <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-b <replaceable class="parameter">keysize</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">keyfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-p <replaceable class="parameter">port</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">address</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">chrootdir</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-u <replaceable class="parameter">user</replaceable></option></arg>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-
-  <refsection><info><title>DESCRIPTION</title></info>
-
-    <para><command>rndc-confgen</command>
-      generates configuration files
-      for <command>rndc</command>.  It can be used as a
-      convenient alternative to writing the
-      <filename>rndc.conf</filename> file
-      and the corresponding <command>controls</command>
-      and <command>key</command>
-      statements in <filename>named.conf</filename> by hand.
-      Alternatively, it can be run with the <command>-a</command>
-      option to set up a <filename>rndc.key</filename> file and
-      avoid the need for a <filename>rndc.conf</filename> file
-      and a <command>controls</command> statement altogether.
-    </para>
-
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
-
-
-    <variablelist>
-      <varlistentry>
-        <term>-a</term>
-        <listitem>
-          <para>
-            Do automatic <command>rndc</command> configuration.
-            This creates a file <filename>rndc.key</filename>
-            in <filename>/etc</filename> (or whatever
-            <varname>sysconfdir</varname>
-            was specified as when <acronym>BIND</acronym> was
-            built)
-            that is read by both <command>rndc</command>
-            and <command>named</command> on startup.  The
-            <filename>rndc.key</filename> file defines a default
-            command channel and authentication key allowing
-            <command>rndc</command> to communicate with
-            <command>named</command> on the local host
-            with no further configuration.
-          </para>
-          <para>
-            Running <command>rndc-confgen -a</command> allows
-            BIND 9 and <command>rndc</command> to be used as
-            drop-in
-            replacements for BIND 8 and <command>ndc</command>,
-            with no changes to the existing BIND 8
-            <filename>named.conf</filename> file.
-          </para>
-          <para>
-            If a more elaborate configuration than that
-            generated by <command>rndc-confgen -a</command>
-            is required, for example if rndc is to be used remotely,
-            you should run <command>rndc-confgen</command> without
-            the
-            <command>-a</command> option and set up a
-            <filename>rndc.conf</filename> and
-            <filename>named.conf</filename>
-            as directed.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-A <replaceable class="parameter">algorithm</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-md5 or
-            if MD5 was disabled hmac-sha256.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-b <replaceable class="parameter">keysize</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is the
-            hash size.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-c <replaceable class="parameter">keyfile</replaceable></term>
-        <listitem>
-          <para>
-            Used with the <command>-a</command> option to specify
-            an alternate location for <filename>rndc.key</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-h</term>
-        <listitem>
-          <para>
-            Prints a short summary of the options and arguments to
-            <command>rndc-confgen</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-k <replaceable class="parameter">keyname</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the key name of the rndc authentication key.
-            This must be a valid domain name.
-            The default is <constant>rndc-key</constant>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-p <replaceable class="parameter">port</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the command channel port where <command>named</command>
-            listens for connections from <command>rndc</command>.
-            The default is 953.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-r <replaceable class="parameter">randomfile</replaceable></term>
-        <listitem>
-          <para>
-            Specifies a source of random data for generating the
-            authorization.  If the operating
-            system does not provide a <filename>/dev/random</filename>
-            or equivalent device, the default source of randomness
-            is keyboard input.  <filename>randomdev</filename>
-            specifies
-            the name of a character device or file containing random
-            data to be used instead of the default.  The special value
-            <filename>keyboard</filename> indicates that keyboard
-            input should be used.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-s <replaceable class="parameter">address</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the IP address where <command>named</command>
-            listens for command channel connections from
-            <command>rndc</command>.  The default is the loopback
-            address 127.0.0.1.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-t <replaceable class="parameter">chrootdir</replaceable></term>
-        <listitem>
-          <para>
-            Used with the <command>-a</command> option to specify
-            a directory where <command>named</command> will run
-            chrooted.  An additional copy of the <filename>rndc.key</filename>
-            will be written relative to this directory so that
-            it will be found by the chrooted <command>named</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-u <replaceable class="parameter">user</replaceable></term>
-        <listitem>
-          <para>
-            Used with the <command>-a</command> option to set the
-            owner
-            of the <filename>rndc.key</filename> file generated.
-            If
-            <command>-t</command> is also specified only the file
-            in
-            the chroot area has its owner changed.
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsection>
-
-  <refsection><info><title>EXAMPLES</title></info>
-
-    <para>
-      To allow <command>rndc</command> to be used with
-      no manual configuration, run
-    </para>
-    <para><userinput>rndc-confgen -a</userinput>
-    </para>
-    <para>
-      To print a sample <filename>rndc.conf</filename> file and
-      corresponding <command>controls</command> and <command>key</command>
-      statements to be manually inserted into <filename>named.conf</filename>,
-      run
-    </para>
-    <para><userinput>rndc-confgen</userinput>
-    </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
-
-    <para><citerefentry>
-        <refentrytitle>rndc</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-        <refentrytitle>rndc.conf</refentrytitle><manvolnum>5</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-        <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
-      <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
-    </para>
-  </refsection>
-
-</refentry>

bin/confgen/rndc-confgen.html

@@ -1,243 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<!--
- - Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016 Internet Systems Consortium, Inc. ("ISC")
- - 
- - This Source Code Form is subject to the terms of the Mozilla Public
- - License, v. 2.0. If a copy of the MPL was not distributed with this
- - file, You can obtain one at http://mozilla.org/MPL/2.0/.
--->
-<html lang="en">
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title>rndc-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
-</head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
-<a name="man.rndc-confgen"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  <div class="refnamediv">
-<h2>Name</h2>
-<p>
-    <span class="application">rndc-confgen</span>
-     &#8212; rndc key generation tool
-  </p>
-</div>
-
-  
-
-  <div class="refsynopsisdiv">
-<h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">rndc-confgen</code> 
-       [<code class="option">-a</code>]
-       [<code class="option">-A <em class="replaceable"><code>algorithm</code></em></code>]
-       [<code class="option">-b <em class="replaceable"><code>keysize</code></em></code>]
-       [<code class="option">-c <em class="replaceable"><code>keyfile</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
-       [<code class="option">-p <em class="replaceable"><code>port</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>address</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>chrootdir</code></em></code>]
-       [<code class="option">-u <em class="replaceable"><code>user</code></em></code>]
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>rndc-confgen</strong></span>
-      generates configuration files
-      for <span class="command"><strong>rndc</strong></span>.  It can be used as a
-      convenient alternative to writing the
-      <code class="filename">rndc.conf</code> file
-      and the corresponding <span class="command"><strong>controls</strong></span>
-      and <span class="command"><strong>key</strong></span>
-      statements in <code class="filename">named.conf</code> by hand.
-      Alternatively, it can be run with the <span class="command"><strong>-a</strong></span>
-      option to set up a <code class="filename">rndc.key</code> file and
-      avoid the need for a <code class="filename">rndc.conf</code> file
-      and a <span class="command"><strong>controls</strong></span> statement altogether.
-    </p>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
-<dt><span class="term">-a</span></dt>
-<dd>
-          <p>
-            Do automatic <span class="command"><strong>rndc</strong></span> configuration.
-            This creates a file <code class="filename">rndc.key</code>
-            in <code class="filename">/etc</code> (or whatever
-            <code class="varname">sysconfdir</code>
-            was specified as when <acronym class="acronym">BIND</acronym> was
-            built)
-            that is read by both <span class="command"><strong>rndc</strong></span>
-            and <span class="command"><strong>named</strong></span> on startup.  The
-            <code class="filename">rndc.key</code> file defines a default
-            command channel and authentication key allowing
-            <span class="command"><strong>rndc</strong></span> to communicate with
-            <span class="command"><strong>named</strong></span> on the local host
-            with no further configuration.
-          </p>
-          <p>
-            Running <span class="command"><strong>rndc-confgen -a</strong></span> allows
-            BIND 9 and <span class="command"><strong>rndc</strong></span> to be used as
-            drop-in
-            replacements for BIND 8 and <span class="command"><strong>ndc</strong></span>,
-            with no changes to the existing BIND 8
-            <code class="filename">named.conf</code> file.
-          </p>
-          <p>
-            If a more elaborate configuration than that
-            generated by <span class="command"><strong>rndc-confgen -a</strong></span>
-            is required, for example if rndc is to be used remotely,
-            you should run <span class="command"><strong>rndc-confgen</strong></span> without
-            the
-            <span class="command"><strong>-a</strong></span> option and set up a
-            <code class="filename">rndc.conf</code> and
-            <code class="filename">named.conf</code>
-            as directed.
-          </p>
-        </dd>
-<dt><span class="term">-A <em class="replaceable"><code>algorithm</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-md5 or
-            if MD5 was disabled hmac-sha256.
-          </p>
-        </dd>
-<dt><span class="term">-b <em class="replaceable"><code>keysize</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is the
-            hash size.
-          </p>
-        </dd>
-<dt><span class="term">-c <em class="replaceable"><code>keyfile</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to specify
-            an alternate location for <code class="filename">rndc.key</code>.
-          </p>
-        </dd>
-<dt><span class="term">-h</span></dt>
-<dd>
-          <p>
-            Prints a short summary of the options and arguments to
-            <span class="command"><strong>rndc-confgen</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the key name of the rndc authentication key.
-            This must be a valid domain name.
-            The default is <code class="constant">rndc-key</code>.
-          </p>
-        </dd>
-<dt><span class="term">-p <em class="replaceable"><code>port</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the command channel port where <span class="command"><strong>named</strong></span>
-            listens for connections from <span class="command"><strong>rndc</strong></span>.
-            The default is 953.
-          </p>
-        </dd>
-<dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd>
-          <p>
-            Specifies a source of random data for generating the
-            authorization.  If the operating
-            system does not provide a <code class="filename">/dev/random</code>
-            or equivalent device, the default source of randomness
-            is keyboard input.  <code class="filename">randomdev</code>
-            specifies
-            the name of a character device or file containing random
-            data to be used instead of the default.  The special value
-            <code class="filename">keyboard</code> indicates that keyboard
-            input should be used.
-          </p>
-        </dd>
-<dt><span class="term">-s <em class="replaceable"><code>address</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the IP address where <span class="command"><strong>named</strong></span>
-            listens for command channel connections from
-            <span class="command"><strong>rndc</strong></span>.  The default is the loopback
-            address 127.0.0.1.
-          </p>
-        </dd>
-<dt><span class="term">-t <em class="replaceable"><code>chrootdir</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to specify
-            a directory where <span class="command"><strong>named</strong></span> will run
-            chrooted.  An additional copy of the <code class="filename">rndc.key</code>
-            will be written relative to this directory so that
-            it will be found by the chrooted <span class="command"><strong>named</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-u <em class="replaceable"><code>user</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to set the
-            owner
-            of the <code class="filename">rndc.key</code> file generated.
-            If
-            <span class="command"><strong>-t</strong></span> is also specified only the file
-            in
-            the chroot area has its owner changed.
-          </p>
-        </dd>
-</dl></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>EXAMPLES</h2>
-
-    <p>
-      To allow <span class="command"><strong>rndc</strong></span> to be used with
-      no manual configuration, run
-    </p>
-    <p><strong class="userinput"><code>rndc-confgen -a</code></strong>
-    </p>
-    <p>
-      To print a sample <code class="filename">rndc.conf</code> file and
-      corresponding <span class="command"><strong>controls</strong></span> and <span class="command"><strong>key</strong></span>
-      statements to be manually inserted into <code class="filename">named.conf</code>,
-      run
-    </p>
-    <p><strong class="userinput"><code>rndc-confgen</code></strong>
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">rndc</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">rndc.conf</span>(5)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
-    </p>
-  </div>
-
-</div></body>
-</html>

bin/confgen/unix/Makefile.in

@@ -1,27 +0,0 @@
-# Copyright (C) 2009, 2012, 2016  Internet Systems Consortium, Inc. ("ISC")
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-
-# $Id: Makefile.in,v 1.3 2009/06/11 23:47:55 tbox Exp $
-
-srcdir =	@srcdir@
-VPATH =		@srcdir@
-top_srcdir =	@top_srcdir@
-
-@BIND9_MAKE_INCLUDES@
-
-CINCLUDES =	-I${srcdir}/include -I${srcdir}/../include \
-		${DNS_INCLUDES} ${ISC_INCLUDES}
-
-CDEFINES =
-CWARNINGS =
-
-OBJS =		os.@O@
-
-SRCS =		os.c
-
-TARGETS =	${OBJS}
-
-@BIND9_MAKE_RULES@

bin/confgen/unix/os.c

@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: os.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-/*! \file */
-
-#include <config.h>
-
-#include <confgen/os.h>
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <pwd.h>
-#include <errno.h>
-#include <stdio.h>
-#include <sys/stat.h>
-
-int
-set_user(FILE *fd, const char *user) {
-	struct passwd *pw;
-
-	pw = getpwnam(user);
-	if (pw == NULL) {
-		errno = EINVAL;
-		return (-1);
-	}
-	return (fchown(fileno(fd), pw->pw_uid, -1));
-}

bin/confgen/util.c

@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2009, 2015, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: util.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-/*! \file */
-
-#include <config.h>
-
-#include <stdarg.h>
-#include <stdlib.h>
-#include <stdio.h>
-
-#include <isc/boolean.h>
-#include <isc/print.h>
-
-#include "util.h"
-
-extern isc_boolean_t verbose;
-extern const char *progname;
-
-void
-notify(const char *fmt, ...) {
-	va_list ap;
-
-	if (verbose) {
-		va_start(ap, fmt);
-		vfprintf(stderr, fmt, ap);
-		va_end(ap);
-		fputs("\n", stderr);
-	}
-}
-
-void
-fatal(const char *format, ...) {
-	va_list args;
-
-	fprintf(stderr, "%s: ", progname);
-	va_start(args, format);
-	vfprintf(stderr, format, args);
-	va_end(args);
-	fprintf(stderr, "\n");
-	exit(1);
-}

bin/confgen/util.h

@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: util.h,v 1.4 2009/09/29 15:06:05 fdupont Exp $ */
-
-#ifndef RNDC_UTIL_H
-#define RNDC_UTIL_H 1
-
-/*! \file */
-
-#include <isc/lang.h>
-#include <isc/platform.h>
-
-#include <isc/formatcheck.h>
-
-#define NS_CONTROL_PORT		953
-
-#undef DO
-#define DO(name, function) \
-	do { \
-		result = function; \
-		if (result != ISC_R_SUCCESS) \
-			fatal("%s: %s", name, isc_result_totext(result)); \
-		else \
-			notify("%s", name); \
-	} while (0)
-
-ISC_LANG_BEGINDECLS
-
-void
-notify(const char *fmt, ...) ISC_FORMAT_PRINTF(1, 2);
-
-ISC_PLATFORM_NORETURN_PRE void
-fatal(const char *format, ...)
-ISC_FORMAT_PRINTF(1, 2) ISC_PLATFORM_NORETURN_POST;
-
-ISC_LANG_ENDDECLS
-
-#endif /* RNDC_UTIL_H */

bin/confgen/win32/confgentool.dsp.in

@@ -1,135 +0,0 @@
-# Microsoft Developer Studio Project File - Name="confgentool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
-
-CFG=confgentool - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak" CFG="confgentool - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "confgentool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE "confgentool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "confgentool - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Release/confgentool.lib"
-
-!ELSEIF  "$(CFG)" == "confgentool - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug /out:"Debug/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Debug/confgentool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "confgentool - @PLATFORM@ Release"
-# Name "confgentool - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\keygen.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\keygen.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\os.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/confgen/win32/confgentool.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "confgentool"=".\confgentool.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/confgen/win32/confgentool.vcxproj.filters.in

@@ -1,39 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\keygen.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-    <ClInclude Include="..\util.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-    <ClInclude Include="..\include\confgen\os.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\keygen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="..\util.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="os.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/confgentool.vcxproj.in

@@ -1,109 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{64964B03-4815-41F0-9057-E766A94AF197}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>confgentool</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>.\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>.\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <LinkTimeCodeGeneration>false</LinkTimeCodeGeneration>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\include\confgen\os.h" />
-    <ClInclude Include="..\keygen.h" />
-    <ClInclude Include="..\util.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\keygen.c" />
-    <ClCompile Include="..\util.c" />
-    <ClCompile Include="os.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/confgentool.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/confgen/win32/ddnsconfgen.dsp.in

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="ddnsconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=ddnsconfgen - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "ddnsconfgen - @PLATFORM@ Release"
-# Name "ddnsconfgen - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\ddns-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/ddnsconfgen.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "ddnsconfgen"=".\ddnsconfgen.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/confgen/win32/ddnsconfgen.mak.in

@@ -1,337 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on ddnsconfgen.dsp
-!IF "$(CFG)" == ""
-CFG=ddnsconfgen - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to ddnsconfgen - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "ddnsconfgen - @PLATFORM@ Release" && "$(CFG)" != "ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\ddns-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\ddns-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\ddnsconfgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\ddns-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\ddns-confgen.exe" "$(OUTDIR)\ddnsconfgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\ddns-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\ddnsconfgen.bsc"
-	-@erase "$(OUTDIR)\ddns-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.exe"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\ddns-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\ddnsconfgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\ddns-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("ddnsconfgen.dep")
-!INCLUDE "ddnsconfgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "ddnsconfgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release" || "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\ddns-confgen.c"
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\ddns-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\ddns-confgen.obj"	"$(INTDIR)\ddns-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/ddnsconfgen.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\ddns-confgen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.in

@@ -1,121 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{1EA4FC64-F33B-4A50-970A-EA052BBE9CF1}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>ddnsconfgen</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>ddns-confgen</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>ddns-confgen</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y ddns-confgen.exe tsig-keygen.exe
-copy /Y ddns-confgen.ilk tsig-keygen.ilk
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y ddns-confgen.exe tsig-keygen.exe
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClCompile Include="..\ddns-confgen.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/confgen/win32/os.c

@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2009, 2016  Internet Systems Consortium, Inc. ("ISC")
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- */
-
-/* $Id: os.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-#include <config.h>
-
-#include <confgen/os.h>
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <errno.h>
-#include <stdio.h>
-#include <io.h>
-#include <sys/stat.h>
-
-int
-set_user(FILE *fd, const char *user) {
-	return (0);
-}

bin/confgen/win32/rndcconfgen.dsp.in

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="rndcconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=rndcconfgen - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "rndcconfgen - @PLATFORM@ Release"
-# Name "rndcconfgen - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\rndc-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/rndcconfgen.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "rndconfgen"=".\rndconfgen.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/confgen/win32/rndcconfgen.mak.in

@@ -1,336 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on confgen.dsp
-!IF "$(CFG)" == ""
-CFG=rndcconfgen - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to rndcconfgen - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "rndcconfgen - @PLATFORM@ Release" && "$(CFG)" != "rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\rndc-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\rndc-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\confgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rndc-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\rndc-confgen.exe" "$(OUTDIR)\confgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\rndc-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\confgen.bsc"
-	-@erase "$(OUTDIR)\rndc-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.exe"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\rndc-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\confgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\rndc-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("confgen.dep")
-!INCLUDE "confgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "confgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "rndcconfgen - @PLATFORM@ Release" || "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\rndc-confgen.c"
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\rndc-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\rndc-confgen.obj"	"$(INTDIR)\rndc-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/rndcconfgen.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\rndc-confgen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/rndcconfgen.vcxproj.in

@@ -1,110 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{1E2C1635-3093-4D59-80E7-4743AC10F22F}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>rndcconfgen</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>rndc-confgen</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>rndc-confgen</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClCompile Include="..\rndc-confgen.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/rndcconfgen.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/delv/.gitignore

@@ -1 +0,0 @@
-/delv

bin/delv/Makefile.in

@@ -1,78 +0,0 @@
-# Copyright (C) 2014-2016  Internet Systems Consortium, Inc. ("ISC")
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-
-srcdir =	@srcdir@
-VPATH =		@srcdir@
-top_srcdir =	@top_srcdir@
-
-VERSION=@BIND9_VERSION@
-
-@BIND9_MAKE_INCLUDES@
-
-CINCLUDES =	-I${srcdir}/include ${DNS_INCLUDES} ${ISC_INCLUDES} \
-		@DST_OPENSSL_INC@ ${IRS_INCLUDES} ${ISCCFG_INCLUDES}
-
-CDEFINES =	@CRYPTO@ -DVERSION=\"${VERSION}\" \
-		-DSYSCONFDIR=\"${sysconfdir}\"
-CWARNINGS =
-
-ISCCFGLIBS =	../../lib/isccfg/libisccfg.@A@
-DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
-ISCNOSYMLIBS =	../../lib/isc/libisc-nosymtbl.@A@
-ISCLIBS =	../../lib/isc/libisc.@A@
-IRSLIBS =	../../lib/irs/libirs.@A@
-
-ISCCFGDEPLIBS =	../../lib/isccfg/libisccfg.@A@
-DNSDEPLIBS =	../../lib/dns/libdns.@A@
-ISCDEPLIBS =	../../lib/isc/libisc.@A@
-IRSDEPLIBS =	../../lib/irs/libirs.@A@
-
-DEPLIBS =	${DNSDEPLIBS} ${IRSDEPLIBS} ${ISCCFGDEPLIBS} ${ISCDEPLIBS}
-
-LIBS =		${DNSLIBS} ${IRSLIBS} ${ISCCFGLIBS} ${ISCLIBS} @LIBS@
-NOSYMLIBS =	${DNSLIBS} ${IRSLIBS} ${ISCCFGLIBS} ${ISCNOSYMLIBS} @LIBS@
-
-SUBDIRS =
-
-TARGETS =	delv@EXEEXT@
-
-OBJS =		delv.@O@
-
-SRCS =		delv.c
-
-MANPAGES =	delv.1
-
-HTMLPAGES =	delv.html
-
-MANOBJS =	${MANPAGES} ${HTMLPAGES}
-
-@BIND9_MAKE_RULES@
-
-delv@EXEEXT@: delv.@O@ ${DEPLIBS}
-	export BASEOBJS="delv.@O@"; \
-	export LIBS0="${DNSLIBS}"; \
-	${FINALBUILDCMD}
-
-installdirs:
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${bindir}
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man1
-
-install:: delv@EXEEXT@ installdirs
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} \
-		delv@EXEEXT@ ${DESTDIR}${bindir}
-	${INSTALL_DATA} ${srcdir}/delv.1 ${DESTDIR}${mandir}/man1
-
-uninstall::
-	rm -f ${DESTDIR}${mandir}/man1/delv.1
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${bindir}/delv@EXEEXT@
-
-doc man:: ${MANOBJS}
-
-docclean manclean maintainer-clean::
-	rm -f ${MANOBJS}
-
-clean distclean maintainer-clean::
-	rm -f ${TARGETS}

bin/delv/delv.1

@@ -1,441 +0,0 @@
-.\" Copyright (C) 2014-2016 Internet Systems Consortium, Inc. ("ISC")
-.\" 
-.\" This Source Code Form is subject to the terms of the Mozilla Public
-.\" License, v. 2.0. If a copy of the MPL was not distributed with this
-.\" file, You can obtain one at http://mozilla.org/MPL/2.0/.
-.\"
-.hy 0
-.ad l
-'\" t
-.\"     Title: delv
-.\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-04-23
-.\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
-.\"
-.TH "DELV" "1" "2014\-04\-23" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
-.SH "NAME"
-delv \- DNS lookup and validation utility
-.SH "SYNOPSIS"
-.HP \w'\fBdelv\fR\ 'u
-\fBdelv\fR [@server] [\fB\-4\fR] [\fB\-6\fR] [\fB\-a\ \fR\fB\fIanchor\-file\fR\fR] [\fB\-b\ \fR\fB\fIaddress\fR\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-d\ \fR\fB\fIlevel\fR\fR] [\fB\-i\fR] [\fB\-m\fR] [\fB\-p\ \fR\fB\fIport#\fR\fR] [\fB\-q\ \fR\fB\fIname\fR\fR] [\fB\-t\ \fR\fB\fItype\fR\fR] [\fB\-x\ \fR\fB\fIaddr\fR\fR] [name] [type] [class] [queryopt...]
-.HP \w'\fBdelv\fR\ 'u
-\fBdelv\fR [\fB\-h\fR]
-.HP \w'\fBdelv\fR\ 'u
-\fBdelv\fR [\fB\-v\fR]
-.HP \w'\fBdelv\fR\ 'u
-\fBdelv\fR [queryopt...] [query...]
-.SH "DESCRIPTION"
-.PP
-\fBdelv\fR
-(Domain Entity Lookup & Validation) is a tool for sending DNS queries and validating the results, using the same internal resolver and validator logic as
-\fBnamed\fR\&.
-.PP
-\fBdelv\fR
-will send to a specified name server all queries needed to fetch and validate the requested data; this includes the original requested query, subsequent queries to follow CNAME or DNAME chains, and queries for DNSKEY, DS and DLV records to establish a chain of trust for DNSSEC validation\&. It does not perform iterative resolution, but simulates the behavior of a name server configured for DNSSEC validating and forwarding\&.
-.PP
-By default, responses are validated using built\-in DNSSEC trust anchors for the root zone ("\&.") and for the ISC DNSSEC lookaside validation zone ("dlv\&.isc\&.org")\&. Records returned by
-\fBdelv\fR
-are either fully validated or were not signed\&. If validation fails, an explanation of the failure is included in the output; the validation process can be traced in detail\&. Because
-\fBdelv\fR
-does not rely on an external server to carry out validation, it can be used to check the validity of DNS responses in environments where local name servers may not be trustworthy\&.
-.PP
-Unless it is told to query a specific name server,
-\fBdelv\fR
-will try each of the servers listed in
-/etc/resolv\&.conf\&. If no usable server addresses are found,
-\fBdelv\fR
-will send queries to the localhost addresses (127\&.0\&.0\&.1 for IPv4, ::1 for IPv6)\&.
-.PP
-When no command line arguments or options are given,
-\fBdelv\fR
-will perform an NS query for "\&." (the root zone)\&.
-.SH "SIMPLE USAGE"
-.PP
-A typical invocation of
-\fBdelv\fR
-looks like:
-.sp
-.if n \{\
-.RS 4
-.\}
-.nf
- delv @server name type 
-.fi
-.if n \{\
-.RE
-.\}
-.sp
-where:
-.PP
-\fBserver\fR
-.RS 4
-is the name or IP address of the name server to query\&. This can be an IPv4 address in dotted\-decimal notation or an IPv6 address in colon\-delimited notation\&. When the supplied
-\fIserver\fR
-argument is a hostname,
-\fBdelv\fR
-resolves that name before querying that name server (note, however, that this initial lookup is
-\fInot\fR
-validated by DNSSEC)\&.
-.sp
-If no
-\fIserver\fR
-argument is provided,
-\fBdelv\fR
-consults
-/etc/resolv\&.conf; if an address is found there, it queries the name server at that address\&. If either of the
-\fB\-4\fR
-or
-\fB\-6\fR
-options are in use, then only addresses for the corresponding transport will be tried\&. If no usable addresses are found,
-\fBdelv\fR
-will send queries to the localhost addresses (127\&.0\&.0\&.1 for IPv4, ::1 for IPv6)\&.
-.RE
-.PP
-\fBname\fR
-.RS 4
-is the domain name to be looked up\&.
-.RE
-.PP
-\fBtype\fR
-.RS 4
-indicates what type of query is required \(em ANY, A, MX, etc\&.
-\fItype\fR
-can be any valid query type\&. If no
-\fItype\fR
-argument is supplied,
-\fBdelv\fR
-will perform a lookup for an A record\&.
-.RE
-.SH "OPTIONS"
-.PP
-\-a \fIanchor\-file\fR
-.RS 4
-Specifies a file from which to read DNSSEC trust anchors\&. The default is
-/etc/bind\&.keys, which is included with
-BIND
-9 and contains trust anchors for the root zone ("\&.") and for the ISC DNSSEC lookaside validation zone ("dlv\&.isc\&.org")\&.
-.sp
-Keys that do not match the root or DLV trust\-anchor names are ignored; these key names can be overridden using the
-\fB+dlv=NAME\fR
-or
-\fB+root=NAME\fR
-options\&.
-.sp
-Note: When reading the trust anchor file,
-\fBdelv\fR
-treats
-\fBmanaged\-keys\fR
-statements and
-\fBtrusted\-keys\fR
-statements identically\&. That is, for a managed key, it is the
-\fIinitial\fR
-key that is trusted; RFC 5011 key management is not supported\&.
-\fBdelv\fR
-will not consult the managed\-keys database maintained by
-\fBnamed\fR\&. This means that if either of the keys in
-/etc/bind\&.keys
-is revoked and rolled over, it will be necessary to update
-/etc/bind\&.keys
-to use DNSSEC validation in
-\fBdelv\fR\&.
-.RE
-.PP
-\-b \fIaddress\fR
-.RS 4
-Sets the source IP address of the query to
-\fIaddress\fR\&. This must be a valid address on one of the host\*(Aqs network interfaces or "0\&.0\&.0\&.0" or "::"\&. An optional source port may be specified by appending "#<port>"
-.RE
-.PP
-\-c \fIclass\fR
-.RS 4
-Sets the query class for the requested data\&. Currently, only class "IN" is supported in
-\fBdelv\fR
-and any other value is ignored\&.
-.RE
-.PP
-\-d \fIlevel\fR
-.RS 4
-Set the systemwide debug level to
-\fBlevel\fR\&. The allowed range is from 0 to 99\&. The default is 0 (no debugging)\&. Debugging traces from
-\fBdelv\fR
-become more verbose as the debug level increases\&. See the
-\fB+mtrace\fR,
-\fB+rtrace\fR, and
-\fB+vtrace\fR
-options below for additional debugging details\&.
-.RE
-.PP
-\-h
-.RS 4
-Display the
-\fBdelv\fR
-help usage output and exit\&.
-.RE
-.PP
-\-i
-.RS 4
-Insecure mode\&. This disables internal DNSSEC validation\&. (Note, however, this does not set the CD bit on upstream queries\&. If the server being queried is performing DNSSEC validation, then it will not return invalid data; this can cause
-\fBdelv\fR
-to time out\&. When it is necessary to examine invalid data to debug a DNSSEC problem, use
-\fBdig +cd\fR\&.)
-.RE
-.PP
-\-m
-.RS 4
-Enables memory usage debugging\&.
-.RE
-.PP
-\-p \fIport#\fR
-.RS 4
-Specifies a destination port to use for queries instead of the standard DNS port number 53\&. This option would be used with a name server that has been configured to listen for queries on a non\-standard port number\&.
-.RE
-.PP
-\-q \fIname\fR
-.RS 4
-Sets the query name to
-\fIname\fR\&. While the query name can be specified without using the
-\fB\-q\fR, it is sometimes necessary to disambiguate names from types or classes (for example, when looking up the name "ns", which could be misinterpreted as the type NS, or "ch", which could be misinterpreted as class CH)\&.
-.RE
-.PP
-\-t \fItype\fR
-.RS 4
-Sets the query type to
-\fItype\fR, which can be any valid query type supported in BIND 9 except for zone transfer types AXFR and IXFR\&. As with
-\fB\-q\fR, this is useful to distinguish query name type or class when they are ambiguous\&. it is sometimes necessary to disambiguate names from types\&.
-.sp
-The default query type is "A", unless the
-\fB\-x\fR
-option is supplied to indicate a reverse lookup, in which case it is "PTR"\&.
-.RE
-.PP
-\-v
-.RS 4
-Print the
-\fBdelv\fR
-version and exit\&.
-.RE
-.PP
-\-x \fIaddr\fR
-.RS 4
-Performs a reverse lookup, mapping an addresses to a name\&.
-\fIaddr\fR
-is an IPv4 address in dotted\-decimal notation, or a colon\-delimited IPv6 address\&. When
-\fB\-x\fR
-is used, there is no need to provide the
-\fIname\fR
-or
-\fItype\fR
-arguments\&.
-\fBdelv\fR
-automatically performs a lookup for a name like
-11\&.12\&.13\&.10\&.in\-addr\&.arpa
-and sets the query type to PTR\&. IPv6 addresses are looked up using nibble format under the IP6\&.ARPA domain\&.
-.RE
-.PP
-\-4
-.RS 4
-Forces
-\fBdelv\fR
-to only use IPv4\&.
-.RE
-.PP
-\-6
-.RS 4
-Forces
-\fBdelv\fR
-to only use IPv6\&.
-.RE
-.SH "QUERY OPTIONS"
-.PP
-\fBdelv\fR
-provides a number of query options which affect the way results are displayed, and in some cases the way lookups are performed\&.
-.PP
-Each query option is identified by a keyword preceded by a plus sign (+)\&. Some keywords set or reset an option\&. These may be preceded by the string
-no
-to negate the meaning of that keyword\&. Other keywords assign values to options like the timeout interval\&. They have the form
-\fB+keyword=value\fR\&. The query options are:
-.PP
-\fB+[no]cdflag\fR
-.RS 4
-Controls whether to set the CD (checking disabled) bit in queries sent by
-\fBdelv\fR\&. This may be useful when troubleshooting DNSSEC problems from behind a validating resolver\&. A validating resolver will block invalid responses, making it difficult to retrieve them for analysis\&. Setting the CD flag on queries will cause the resolver to return invalid responses, which
-\fBdelv\fR
-can then validate internally and report the errors in detail\&.
-.RE
-.PP
-\fB+[no]class\fR
-.RS 4
-Controls whether to display the CLASS when printing a record\&. The default is to display the CLASS\&.
-.RE
-.PP
-\fB+[no]ttl\fR
-.RS 4
-Controls whether to display the TTL when printing a record\&. The default is to display the TTL\&.
-.RE
-.PP
-\fB+[no]rtrace\fR
-.RS 4
-Toggle resolver fetch logging\&. This reports the name and type of each query sent by
-\fBdelv\fR
-in the process of carrying out the resolution and validation process: this includes including the original query and all subsequent queries to follow CNAMEs and to establish a chain of trust for DNSSEC validation\&.
-.sp
-This is equivalent to setting the debug level to 1 in the "resolver" logging category\&. Setting the systemwide debug level to 1 using the
-\fB\-d\fR
-option will product the same output (but will affect other logging categories as well)\&.
-.RE
-.PP
-\fB+[no]mtrace\fR
-.RS 4
-Toggle message logging\&. This produces a detailed dump of the responses received by
-\fBdelv\fR
-in the process of carrying out the resolution and validation process\&.
-.sp
-This is equivalent to setting the debug level to 10 for the "packets" module of the "resolver" logging category\&. Setting the systemwide debug level to 10 using the
-\fB\-d\fR
-option will produce the same output (but will affect other logging categories as well)\&.
-.RE
-.PP
-\fB+[no]vtrace\fR
-.RS 4
-Toggle validation logging\&. This shows the internal process of the validator as it determines whether an answer is validly signed, unsigned, or invalid\&.
-.sp
-This is equivalent to setting the debug level to 3 for the "validator" module of the "dnssec" logging category\&. Setting the systemwide debug level to 3 using the
-\fB\-d\fR
-option will produce the same output (but will affect other logging categories as well)\&.
-.RE
-.PP
-\fB+[no]short\fR
-.RS 4
-Provide a terse answer\&. The default is to print the answer in a verbose form\&.
-.RE
-.PP
-\fB+[no]comments\fR
-.RS 4
-Toggle the display of comment lines in the output\&. The default is to print comments\&.
-.RE
-.PP
-\fB+[no]rrcomments\fR
-.RS 4
-Toggle the display of per\-record comments in the output (for example, human\-readable key information about DNSKEY records)\&. The default is to print per\-record comments\&.
-.RE
-.PP
-\fB+[no]crypto\fR
-.RS 4
-Toggle the display of cryptographic fields in DNSSEC records\&. The contents of these field are unnecessary to debug most DNSSEC validation failures and removing them makes it easier to see the common failures\&. The default is to display the fields\&. When omitted they are replaced by the string "[omitted]" or in the DNSKEY case the key id is displayed as the replacement, e\&.g\&. "[ key id = value ]"\&.
-.RE
-.PP
-\fB+[no]trust\fR
-.RS 4
-Controls whether to display the trust level when printing a record\&. The default is to display the trust level\&.
-.RE
-.PP
-\fB+[no]split[=W]\fR
-.RS 4
-Split long hex\- or base64\-formatted fields in resource records into chunks of
-\fIW\fR
-characters (where
-\fIW\fR
-is rounded up to the nearest multiple of 4)\&.
-\fI+nosplit\fR
-or
-\fI+split=0\fR
-causes fields not to be split at all\&. The default is 56 characters, or 44 characters when multiline mode is active\&.
-.RE
-.PP
-\fB+[no]all\fR
-.RS 4
-Set or clear the display options
-\fB+[no]comments\fR,
-\fB+[no]rrcomments\fR, and
-\fB+[no]trust\fR
-as a group\&.
-.RE
-.PP
-\fB+[no]multiline\fR
-.RS 4
-Print long records (such as RRSIG, DNSKEY, and SOA records) in a verbose multi\-line format with human\-readable comments\&. The default is to print each record on a single line, to facilitate machine parsing of the
-\fBdelv\fR
-output\&.
-.RE
-.PP
-\fB+[no]dnssec\fR
-.RS 4
-Indicates whether to display RRSIG records in the
-\fBdelv\fR
-output\&. The default is to do so\&. Note that (unlike in
-\fBdig\fR) this does
-\fInot\fR
-control whether to request DNSSEC records or whether to validate them\&. DNSSEC records are always requested, and validation will always occur unless suppressed by the use of
-\fB\-i\fR
-or
-\fB+noroot\fR
-and
-\fB+nodlv\fR\&.
-.RE
-.PP
-\fB+[no]root[=ROOT]\fR
-.RS 4
-Indicates whether to perform conventional (non\-lookaside) DNSSEC validation, and if so, specifies the name of a trust anchor\&. The default is to validate using a trust anchor of "\&." (the root zone), for which there is a built\-in key\&. If specifying a different trust anchor, then
-\fB\-a\fR
-must be used to specify a file containing the key\&.
-.RE
-.PP
-\fB+[no]dlv[=DLV]\fR
-.RS 4
-Indicates whether to perform DNSSEC lookaside validation, and if so, specifies the name of the DLV trust anchor\&. The default is to perform lookaside validation using a trust anchor of "dlv\&.isc\&.org", for which there is a built\-in key\&. If specifying a different name, then
-\fB\-a\fR
-must be used to specify a file containing the DLV key\&.
-.RE
-.PP
-\fB+[no]tcp\fR
-.RS 4
-Controls whether to use TCP when sending queries\&. The default is to use UDP unless a truncated response has been received\&.
-.RE
-.PP
-\fB+[no]unknownformat\fR
-.RS 4
-Print all RDATA in unknown RR type presentation format (RFC 3597)\&. The default is to print RDATA for known types in the type\*(Aqs presentation format\&.
-.RE
-.SH "FILES"
-.PP
-/etc/bind\&.keys
-.PP
-/etc/resolv\&.conf
-.SH "SEE ALSO"
-.PP
-\fBdig\fR(1),
-\fBnamed\fR(8),
-RFC4034,
-RFC4035,
-RFC4431,
-RFC5074,
-RFC5155\&.
-.SH "AUTHOR"
-.PP
-\fBInternet Systems Consortium, Inc\&.\fR
-.SH "COPYRIGHT"
-.br
-Copyright \(co 2014-2016 Internet Systems Consortium, Inc. ("ISC")
-.br