apply the existing journal file, if any, to the old version of the
database before diffing it against the new version. then, append
the diff to the end of the journal. this allows easy creation of
a journal file with multiple deltas, by running named-makejournal
successively.
- write the journal to a default location (file1.jnl) if it was not
specified on the commandline.
- exit with a clear error message if file2's SOA serial number is
not changed from file1.
move the "makejournal" tool from bin/tests/system to bin/tools
and rename it to "named-makejournal". add a man page. update
tests to use the new file location.
An incorrect optimization caused "CNAME and other data" errors not to be detected if certain types were at the same node as a CNAME. This has been fixed.
Closes#5150
Merge branch '5150-cname-and-other-data-check-not-applied-to-all-types' into 'main'
See merge request isc-projects/bind9!10033
prio_type was being used in the wrong place to optimize cname_and_other.
We have to first exclude and accepted types and we also have to
determine that the record exists before we can check if we are at
a point where a later CNAME cannot appear.
This is a complement to the already present system test "stress" test.
Merge branch 'mnowak/generate-tsan-unit-stress-tests' into 'main'
See merge request isc-projects/bind9!9474
GitLab CI Runner's $builds_dir variable is set to "/builds" by default.
For technical reasons, the FreeBSD Runners, using the "instance"
executor, sets the path differently.
The value of $CI_PROJECT_DIR is based on $builds_dir, so if the
generate-stress-test-configs.py script generates jobs with
$CI_PROJECT_DIR (or variables like $INSTALL_PATH that are based on it)
evaluated, it is calcified to whatever was the value in the particular
environment, disregarding the FreeBSD "instance" executor specifics in
the child pipeline.
Instead of evaluating $CI_PROJECT_DIR in the script, evaluate it in the
runtime environment.
Merge branch 'mnowak/fix-CI_PROJECT_DIR-variable-evaluation' into 'main'
See merge request isc-projects/bind9!10075
GitLab CI Runner's $builds_dir variable is set to "/builds" by default.
For technical reasons, the FreeBSD Runners, using the "instance"
executor, sets the path differently.
The value of $CI_PROJECT_DIR is based on $builds_dir, so if the
generate-stress-test-configs.py script generates jobs with
$CI_PROJECT_DIR (or variables like $INSTALL_PATH that are based on it)
evaluated, it is calcified to whatever was the value in the particular
environment, disregarding the FreeBSD "instance" executor specifics in
the child pipeline.
Instead of evaluating $CI_PROJECT_DIR in the script, evaluate it in the
runtime environment.
Instead of having many node_lock_count * sizeof(<member>) arrays, pack all
the members into a qpcache_bucket_t that is cacheline aligned to prevent
false sharing between RWLocks.
Merge branch 'ondrej/prevent-nodelock-false-sharing' into 'main'
See merge request isc-projects/bind9!10072
Instead of using on hash of the name modulo number of the buckets,
assign the locknum randomly with isc_random_uniform(). This makes
the locknum assignment aligned with qpcache and allows the bucket
number to be non-prime in the future.
Reduce the number of qpzone_ref() and qpzone_unref() calls in
qpzone_detachnode() by relying on the call_rcu to delay
the destruction of the lock buckets.
Instead of having many node_lock_count * sizeof(<member>) arrays, pack
all the members into a qpzone_bucket_t that is cacheline aligned and have
a single array of those.
Instead of having many node_lock_count * sizeof(<member>) arrays, pack
all the members into a qpcache_bucket_t struct that is cacheline aligned
and have a single array of those.
Additionaly, make both the head and the tail of isc_queue_t padded, not
just the head, to prevent false sharing of the lock-free structure with
the lock that follows it.
In some cases, the numeric identifier doesn't correspond to the
directory name (i.e. `resolver` server in `shutdown` test, which is
supposed to be 10.53.0.3). These are typically servers that shouldn't be
auto-started by the runner, thus avoiding the typical `*ns<X>` name.
Support these server by allowing a fallback initialization with custom
numeric identifier in case it can't be parsed from the directory name.
The start()/stop() functions can be used in the pytests in the same way
as start_server and stop_server functions were used in shell tests. Note
that the servers obtained through the servers fixture are still started
and stopped by the test runner at the start and end of the test. This
makes these functions mostly useful for restarting the server(s)
mid-test.
Previously, these functions have been provided as fixtures. This was
limiting re-use, because it wasn't possible to call these outside of
tests / other fixtures without passing these utility functions around.
Move them into isctest.run package instead.
When query logging is enabled, named will now include the destination
address port in the logged message.
Closes#5060
Merge branch '5060-log-query-incoming-port' into 'main'
See merge request isc-projects/bind9!9972
When query logging is enabled, named will now include the destination
address port in the logged message.
Example messages for before and after this change:
before: client @0x7608b2026000 10.53.0.1#52136 (example.test): query: example.test IN A +E(0)K (10.53.0.1)
after: client @0x729bf5c26000 10.53.0.1#35976 (example.test): query: example.test IN A +E(0)K (10.53.0.1#53)
The ANS servers were not to written to handle NS queries at the QNAME, resulting in gratuitous protocol errors that will break tests when NS requests are made for the QNAME: i.e., NXDOMAIN for NS vs data for expected type, CNAME not being returned for all query types.
Prerequisite for !9155Closes#5062
Merge branch '5062-fix-ans-servers-ns-at-qname' into 'main'
See merge request isc-projects/bind9!9786
The ANS servers were not to written to handle NS queries at the
QNAME resulting in gratuitious protocol errors that will break tests
when NS requests are made for the QNAME.
Print the expiration time of the stale RRsets in the cache dump.
Merge branch 'ondrej/print-expiration-time-of-stale-records' into 'main'
See merge request isc-projects/bind9!10057
In #1870, the expiration time of ANCIENT records were printed, but
actually the ancient records are very short lived, and the information
carries a little value.
Instead of printing the expiration of ANCIENT records, print the
expiration time of STALE records.
Under rare circumstances, the RRSet that expired at the time of
the query could be returned with TTL far in the future. This
has been fixed.
As a side-effect, the expiration time of expired RRSets are no
longer printed out in the cache dump.
Closes#5094
Merge branch '5094-fix-timestamp-in-ttl' into 'main'
See merge request isc-projects/bind9!10048
The original .ttl field was actually used as TTL in the dns_qpzone unit.
Restore the field by adding it to union with the .expire struct member
and cleanup all the code that added or subtracted 'now' from the ttl
field as that was misleading as 'now' would be always 0 for qpzone
database.
The find_coveringnsec() was getting the 'now' from two sources -
search->now and separate now argument. Things like this are ticking
bombs, remove the extra 'now' argument and use single source of 'now'.
When the mark_ancient() helper function was introduced, couple of places
with duplicate (or almost duplicate) code was missed. Move the
mark_ancient() function closer to the top of the file, and correctly use
it in places that mark the header as ANCIENT.
If we know that the header has ZEROTTL set, the server should never send
stale records for it and the TTL should never be anything else than 0.
The comment was already there, but the code was not matching the
comment.
The old name was misleading as it never meant time-to-live, e.g. number
of seconds from now when the header should expire. The true meaning was
an expiration time e.g. now + ttl. This was the original design bug
that caused the slip when we assigned header->ttl to rdataset->ttl.
Because the name was matching, nobody has questioned the correctness of
the code both during the MR review and during the numerous re-reviews
when we were searching for the cause of the 54 year TTL.
When the header has been marked as ANCIENT, but the ttl hasn't been
reset (this happens in couple of places), the rdataset TTL would be
set to the header timestamp instead to a reasonable TTL value.
Since this header has been already expired (ANCIENT is set), set the
rdataset TTL to 0 and don't reuse this field to print the expiration
time when dumping the cache. Instead of printing the time, we now
just print 'expired (awaiting cleanup'.
ADB responses were not being validated, allowing spoofed responses to be accepted and used for further lookups. This should not be possible when the servers for the zone are in a signed zone, except with CD=1 requests or when glue is needed. This has been fixed.
Closes#5066
Merge branch '5066-validate-adb-fetches' into 'main'
See merge request isc-projects/bind9!10052
Named was failing to recover when spoofed nameserver address from
a signed zone for a peer zone were returned to a previous CD=1
query. Validate non-glue interior server addresses before using them.
When there are parent and child zones on the same server, the DNSKEY
lookup was failing as the pending record we are validating is needed
to fetch the DNSKEY records. This change allows that to happen.
The caller is already setting STARTATZONE when the name being looked
up is a subdomain of the current domain.
The address lookups from ADB were not being validated, allowing
spoofed responses to be accepted and used for other lookups.
Validate the answers except when CD=1 is set in the triggering
request. Separate ADB names looked up with CD=1 from those without
CD=1, to prevent the use of unvalidated answers in the normal lookup
case (CD=0). Set the TTL on unvalidated (pending) responses to
ADB_CACHE_MINIMUM when adding them to the ADB.
The search for the deepest known zone cut in the cache could improperly reject a node if it contained any stale data, regardless of whether it was the NS RRset that was stale.
Closes#5155
Merge branch '5155-fix-findzonecut' into 'main'
See merge request isc-projects/bind9!10047
the search for the deepest known zone cut in the cache could
improperly reject a node containing stale data, even if the
NS rdataset wasn't the data that was stale.
this change also improves the efficiency of the search by
stopping it when both NS and RRSIG(NS) have been found.
We need to avoid double-triggering of post-merge jobs in the following
scenario:
1. A private MR gets merged into the private BIND 9 repository.
2. This merge operation triggers a "push" pipeline in the private
repository, which correctly runs post-merge jobs, e.g. to set MR
metadata in the private project.
3. When a release is published, a script is run to change the
automatically assigned milestone value ("Not released yet") to
something else.
4. Shortly afterwards, the result of the merge from step 1 is merged
back into a maintenance branch in the public repository.
5. The push operation triggers another "push" pipeline, this time in
the public project.
At this point there are two problems:
- If the script is dumb (like it currently is), it will extract the
merge request ID from the merge commit description and change the
milestone for a merge request in the wrong project namespace.
- Even if the script was fixed to extract and use the correct GitLab
project reference, it would reset the milestone for the merge
request in the private repository back to "Not released yet" - while
the milestone set in step 3 should be retained.
An alternative would be to change the order of operations so that
post-release milestoning happens at a later stage, while also fixing the
script to correctly follow cross-project references, but that approach
seems more fragile than simply failing on all cross-project pushes. The
rule to enforce is: each project should only take care of its own
post-merge tasks.
This MR adds an extra CVE checklist step suggested by @pspacek after
CVE-2024-0760. See [Mattermost][1] for context.
It also syncs checklist steps with their corresponding links to the
explanations wiki page as these have been out-of-sync since !9307.
[1]: https://mattermost.isc.org/isc/pl/156npi4bwtr6pechbj6sfs6jjo
Merge branch 'michal/update-cve-checklist' into 'main'
See merge request isc-projects/bind9!9949
With shallow fetching working reliably in pygit2 1.17.0+, there is no
longer any need for GitLab CI runners to clone the BIND 9 repository
with a fixed depth of 1000 during every "danger" CI job as Hazard is now
able to fetch remote refs with an arbitrary depth, controlled by the
HAZARD_FETCH_DEPTH environment variable. The latter can be defined via
GitLab project's CI settings and adjusted as needed over time, without
the need to update .gitlab-ci.yml every time its value needs to be
changed.
Merge branch 'michal/use-default-cloning-depth-for-the-danger-ci-job' into 'main'
See merge request isc-projects/bind9!9946
With shallow fetching working reliably in pygit2 1.17.0+, there is no
longer any need for GitLab CI runners to clone the BIND 9 repository
with a fixed depth of 1000 during every "danger" CI job as Hazard is now
able to fetch remote refs with an arbitrary depth, controlled by the
HAZARD_FETCH_DEPTH environment variable. The latter can be defined via
GitLab project's CI settings and adjusted as needed over time, without
the need to update .gitlab-ci.yml every time its value needs to be
changed.
Clean up the pattern in the newref() and decref() functions in QP databases. Replace the `db_nodelock_t` structure with plain reference counting for every active database node in QPDB.
Related to #5134
Merge branch '5134-refactor-decref-functions-in-qpdb' into 'main'
See merge request isc-projects/bind9!10006
Change the names of the node reference counting functions
and add comments to make the mechanism easier to understand:
- newref() and decref() are now called qpcnode_acquire()/
qpznode_acquire() and qpcnode_release()/qpznode_release()
respectively; this reflects the fact that they modify both
the internal and external reference counters for a node.
- qpcnode_newref() and qpznode_newref() are now called
qpcnode_erefs_increment() and qpznode_erefs_increment(), and
qpcnode_decref() and qpznode_decref() are now called
qpcnode_erefs_decrement() and qpznode_erefs_decrement(),
to reflect that they only increase and decrease the node's
external reference counters, not internal.
This removes the db_nodelock_t structure and changes the node_locks
array to be composed only of isc_rwlock_t pointers. The .reference
member has been moved to qpdb->references in addition to
common.references that's external to dns_db API users. The .exiting
members has been completely removed as it has no use when the reference
counting is used correctly.
The origin_node in qpcache was always NULL, so we can remove the
getoriginode() function and origin_node pointer as the
dns_db_getoriginnode() correctly returns ISC_R_NOTFOUND when the
function is not implemented.
Cleanup the pattern in the decref() functions in both qpcache.c and
qpzone.c, so it follows the similar patter as we already have in
newref() function.
Changes introducing the support of extended DNS error code 1 and 2 uses
SHA-1 digest for some tests which break FIPS platform. The digest itself
was irrelevant, another digest is used.
Merge branch 'colin/fix-fips-9807' into 'main'
See merge request isc-projects/bind9!10002
Changes !9948 introducing the support of extended DNS error code 1 and 2
uses SHA-1 digest for some tests which break FIPS platform. The digest
itself was irrelevant, another digest is used.
Instead of mixing the dns_resolver and dns_validator units directly with
the EDE code, split-out the dns_ede functionality into own separate
compilation unit and hide the implementation details behind abstraction.
Additionally, the new dns_edelist_t doesn't have to be copied into all
responses as those are attached to the fetch context, but it could be
only passed by reference.
This makes the dns_ede implementation simpler to use, although sligtly
more complicated on the inside.
Closes#5141
Merge branch '5141-ede-mem-fix-v2' into 'main'
See merge request isc-projects/bind9!10016
In order to avoid to loop to find the next position to store an EDE in
a dns_edectx_t, add a "nextede" state which holds the next available
position.
Also, in order ot avoid to loop to find if an EDE is already existing in
a dns_edectx_t, and avoid a duplicate, use a bitmap to immediately know
if the EDE is there or not.
Those both changes applies for adding or copying EDE.
Also make the direction of dns_ede_copy more explicit/avoid errors by
making "edectx_from" a const pointer.
Migrate tests cases in client_test code which were exclusively testing
code which is now all wrapped inside ede compilation unit. Those are
testing maximum number of EDE, duplicate EDE as well as truncation of
text of an EDE.
Also add coverage for the copy of EDE from an edectx to another one, as
well as checking the assertion of the maximum EDE info code which can be
used.
Instead of mixing the dns_resolver and dns_validator units directly with
the EDE code, split-out the dns_ede functionality into own separate
compilation unit and hide the implementation details behind abstraction.
Additionally, the EDE codes are directly copied into the ns_client
buffers by passing the EDE context to dns_resolver_createfetch().
This makes the dns_ede implementation simpler to use, although sligtly
more complicated on the inside.
Co-authored-by: Colin Vidal <colin@isc.org>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Reduce the amount of artifacts stored by running make clean at the end
of unit and system test run. If any of the previous commands fail, the
runner will stop executing the commands in `script` immediately, so the
cleanup only happens if none of the previous commands failed.
The build artifacts from unit and system tests are re-used anywhere and
should be safe to throw away immediately.
Merge branch 'nicki/reduce-ci-artifacts' into 'main'
See merge request isc-projects/bind9!10015
Reduce the amount of artifacts stored by running make clean at the end
of unit and system test run. If any of the previous commands fail, the
runner will stop executing the commands in `script` immediately, so the
cleanup only happens if none of the previous commands failed.
The build artifacts from unit and system tests are re-used anywhere and
should be safe to throw away immediately. Same for respdiff.
The prior regex didn't match the actual names we use for release
branches in the private repo. This caused the merged-metadata job to not
be created upon merging to a release branch, resulting in the private MR
not being properly milestoned.
Use the correct regex along with protecting the v9.*-release branches in
the gitlab UI so that they have access to the token used to perform the
required API operations.
Merge branch 'nicki/ci-fix-post-merge-in-private-repo' into 'main'
See merge request isc-projects/bind9!10003
The prior regex didn't match the actual names we use for release
branches in the private repo. This caused the merged-metadata job to not
be created upon merging to a release branch, resulting in the private MR
not being properly milestoned.
Use the correct regex along with protecting the v9.*-release branches in
the gitlab UI so that they have access to the token used to perform the
required API operations.
The iana.org link is gone.
Merge branch 'mnowak/linkcheck-fix-draft-icann-dnssec-keymgmt-01.txt-link' into 'main'
See merge request isc-projects/bind9!10010
Validation pipeline: https://gitlab.isc.org/isc-projects/bind9/-/pipelines/160984
Prerequisites:
- [x] isc-private/devops!11
- [x] https://gitlab.isc.org/isc-projects/bind9-qa/-/merge_requests/9
Things to consider:
- FreeBSD DoH jobs are not added because Flamethrower queries always timeout.
- This adds 15 more CI jobs:
- Linux (AWS autoscaler): `(auth + recursive + RPZ) * (DoH + DoT) * (amd64 + arm64) = 12`
- FreeBSD (one FreeBSD runner): `(auth + recursive + RPZ) * (DoT) * (amd64) = 3`
- Autoscaler is not yet present on FreeBSD. Adding 3 CI jobs (i.e., DoT) run serially adds 3 hours to the pipeline runtime. Should we add just one FreeBSD DoT job to limit the runtime?
- DoH/DoT performance is slightly lower than pure TCP, so the threshold for the test to pass must be lowered by 5-10% (see isc-private/bind-qa!40).
Merge branch 'mnowak/stress-test-with-doh-dot' into 'main'
See merge request isc-projects/bind9!5800
Add DoH and DoT stress test jobs. The DoH scenario on FreeBSD is omitted
because all Flamethrower's DoH queries timeout on this platform.
Since the response rate of DoT queries is lower than that of DoH and
TCP, the expected TCP response rate is 80%.
Due to the large number of similar stress test configurations, the
"util/generate-stress-test-configs.py" script now generates them as part
of a downstream pipeline. The script is expected to be run exclusively
within the CI environment, which sources all environmental variables and
files.
This refactoring brought the following changes:
- To start a stress test immediately and not wait for artifacts of the
autoreconf job, run the "autoreconf -fi" command as part of every job.
- Drop the BIND_STRESS_TEST_* variables as they were rarely used and
conflicted with mode and platform selection in the configuration
generator.
- Most pipelines now include a few short, randomly selected stress test
jobs. To schedule all stress tests, set the ALL_BIND_STRESS_TESTS
environmental variable, push a tag to CI, or run a scheduled pipeline.
- Set the BIND_STRESS_TESTS_RUN_TIME environmental variable to pick the
stress test runtime of your choosing, set the BIND_STRESS_TESTS_RATE
environmental variable to set different than the default query rate.
- Job timeout is set to 30 minutes plus stress test runtime in minutes.
Extended DNS error 22 (No reachable authority) was previously detected when `fctx_expired` fired. It turns out this function is used as a "safety net" and the timeout detection should be caught earlier.
It was working though, because of another issue fixed by !9927. But then, the recursive request timed out detection occurs before `fctx_expired` making impossible to raise the EDE 22 error.
This fixes the problem by triggering the EDE 22 in the part of the code detecting the (TCP or UDP) time out and taking the decision to cancel the whole fetch (i.e. There is no other server to attempt to contact).
Note this is not targeting users (no release note) because there is no release versions of BIND between !9927 and this changes. Thus a release note would be confusing.
Closes#5137
Merge branch '5137-ede22' into 'main'
See merge request isc-projects/bind9!9985
When an EDE code is added to a message, the code is converted early in a
big-endian order so it can be memcpy-ed directly in the EDE buffer that
will go on the wire.
This previous change forget to update debug logs which still assume the
EDE code was in host byte order. Add a separate variable to
differentiate both and avoid ambiguities
When EDE 3 (stale answer) was added the serve-stale tests were checking
for those exclusively, i.e. grepping for no "EDE" in the dig output when
no stale answer was expected.
However, some stale tests disable stale answers and make the
authoritative server unresponsive, effectively triggering a timed out
request thus an EDE 22. Update those tests so they still tests the
absence of EDE 3 error, but also the presence of EDE 22.
This re-do a previously existing EDE 22 system test as well as add
another one making sure the timed out flow detection works also on UDP
when the resolver is contacting the authoritative server. (the existing
test was using TCP to contact the authoritative servers).
Extended DNS error 22 (No reachable authority) was previously detected
when `fctx_expired` fired. It turns out this function is used as a
"safety net" and the timeout detection should be caught earlier.
It was working though, because of another issue fixed by !9927. Since
this change, the recursive request timed out detection occurs before
`fctx_expired` so EDE 22 is not added to the response message anymore.
The fix of the problem is to add the EDE 22 code in two situations:
- When the dispatch code timed out (rctx_timedout) the resolver code
checks various properties to figure out if it needs to make another
fetch attempt. One of the paramters if the fetch expiration time. If
it expires, the whole recursion is canceled, so it now adds the EDE 22
code.
- If the fetch expiration time doesn't expires in the case above (and
other parameters allows it) a new fetch attempt is made (fctx_query).
But before the new request is actually made, the fetch expiration time
is re-checked. It might then has elapsed, and the whole recursion is
canceled. So it now also adds the EDE 22 code here as well.
The new command is `rndc memprof`. The memory profiling status is also
reported inside `rndc status`. The status also shows whether named can
toggle memory profiling or not and if the server is built with jemalloc.
Closes#4759
Merge branch '4759-add-a-trigger-to-dump-jeprof-data-or-memory-statistics' into 'main'
See merge request isc-projects/bind9!9370
The new command is `rndc memprof`. The memory profiling status is also
reported inside `rndc status`. The status also shows whether named can
toggle memory profiling or not and if the server is built with jemalloc.
The changelog job is supposed to test that the text from GitLab MR
title&description is valid rst syntax and can be built with sphinx. In
49128fc1, the way gitchangelog generates entries was changed - it no
longer writes to the changelog file, but generates output on stdout
instead. Ensure the generated notes is actually written to (some)
rendered file which is part of the docs so that the subsequent sphinx
build attempts to render the note.
Merge branch 'nicki/ci-fix-changelog-job' into 'main'
See merge request isc-projects/bind9!9804
The changelog job is supposed to test that the text from GitLab MR
title&description is valid rst syntax and can be built with sphinx. In
49128fc1, the way gitchangelog generates entries was changed - it no
longer writes to the changelog file, but generates output on stdout
instead. Ensure the generated notes is actually written to (some)
rendered file which is part of the docs so that the subsequent sphinx
build attempts to render the note.
Add support for EDE codes 1 & 2 which might occurs during DNSSEC validation in case of unsupported RRSIG algorithm or DNSKEY digest.
See #2715
Merge branch '2715-ede-unsupported-digest-alg' into 'main'
See merge request isc-projects/bind9!9948
A DNSSEC validation can fail in the case where multiple DNSKEY are
available for a zone and none of them are supported, but for different
reasons: one has a DS record in the parent zone using an unsupported
digest while the other one uses an unsupported encryption algorithm.
Add a specific test case covering this flow and making sure that two
extended DNS error are provided: code 1 and 2, each of them highlighting
unsupported algorithm and digest.
Add support for EDE codes 1 (Unsupported DNSKEY Algorithm) and 2
(Unsupported DS Digest Type) which might occurs during DNSSEC
validation in case of unsupported DNSKEY algorithm or DS digest type.
Because DNSSEC internally kicks off various fetches, we need to copy
all encountered extended errors from fetch responses to the fetch
context. Upon an event, the errors from the fetch context are copied
to the client response.
The minimal dnspython version to run this test is 2.5.0.
Merge branch 'mnowak/pytest_rewrite_cipher-suites' into 'main'
See merge request isc-projects/bind9!8662
The servers are setup and torn down once per each test module. All the
logs and server state persists between individual tests within the same
module. The servers fixture representing these servers should be
module-wide as well.
The base image tends to have a rather old dnspython version and when
used with pylint and mypy it produces errors about newer dnspython
features the old version does not know about.
$ mypy "bin/tests/system/isctest/"
bin/tests/system/isctest/query.py:55: error: Unexpected keyword argument "verify" for "tls" [call-arg]
/usr/lib/python3/dist-packages/dns/query.py:958: note: "tls" defined here
$ pylint --rcfile $CI_PROJECT_DIR/.pylintrc --disable=wrong-import-position $(git ls-files 'bin/tests/system/*.py' | grep -vE 'ans\.py')
************* Module isctest.query
bin/tests/system/isctest/query.py:55:11: E1123: Unexpected keyword argument 'verify' in function call (unexpected-keyword-arg)
When explicitly set to True, the "verify" argument lets dnspython verify
certificates used for the connection. As most certificates in the system
test will inevitably be self-signed, the "verify" argument defaults to
False.
The "verify" argument is present in dnspython since the version 2.5.0.
A number of result codes are obsolete and can be removed. Others, including `ISC_R_NOMEMORY`, are still checked in various places even though they can't occur any longer. These have been cleaned up.
Merge branch 'each-cleanup-results' into 'main'
See merge request isc-projects/bind9!9942
ISCCC_R_SYNTAX, ISCCC_R_EXPIRED, and ISCCC_R_CLOCKSKEW have the
same usage and text formats as DNS_R_SYNTAX, DNS_R_EXPIRED and
DNS_R_CLOCKSCREW respectively. this was originally done because
result codes were defined in separate libraries, and some tool
might be linked with libisccc but not libdns. as the result codes
are now defined in only one place, there's no need to retain the
duplicates.
building BIND without crypto support is no longer possible.
consequently this result code is never sent, and therefore we
don't need code in calling functions to handle it.
the isc_mem allocation functions can no longer fail; as a result,
ISC_R_NOMEMORY is now rarely used: only when an external library
such as libjson-c or libfstrm could return NULL. (even in
these cases, arguably we should assert rather than returning
ISC_R_NOMEMORY.)
code and comments that mentioned ISC_R_NOMEMORY have been
cleaned up, and the following functions have been changed to
type void, since (in most cases) the only value they could
return was ISC_R_SUCCESS:
- dns_dns64_create()
- dns_dyndb_create()
- dns_ipkeylist_resize()
- dns_kasp_create()
- dns_kasp_key_create()
- dns_keystore_create()
- dns_order_create()
- dns_order_add()
- dns_peerlist_new()
- dns_tkeyctx_create()
- dns_view_create()
- dns_zone_setorigin()
- dns_zone_setfile()
- dns_zone_setstream()
- dns_zone_getdbtype()
- dns_zone_setjournal()
- dns_zone_setkeydirectory()
- isc_lex_openstream()
- isc_portset_create()
- isc_symtab_create()
(the exception is dns_view_create(), which could have returned
other error codes in the event of a crypto library failure when
calling isc_file_sanitize(), but that should be a RUNTIME_CHECK
anyway.)
Adjust the limit of maximum disagreements in respdiff results based on
recent pipeline results.
The respdiff and respdiff:asan seem to have almost identical results,
typically around 0.07 % of differences with ocassional spikes up to
around 0.11 %. Similar results are for respdiff:tsan, perhaps with more
common spikes with values up to around 0.12 %. Set the limit to 0.15 %
to allow for some tolerance due to network conditions, time of day etc.
The respdiff:third-party has a slightly higher disagreements average,
with typical values being around 0.12 %. Set the limit to 0.2 %.
Exceeding either of those values should be quite clear indication that
some resolution behaviour has changed, since the values appear to be
very stable within the newly configured limits.
Merge branch 'nicki/ci-respdiff-limits' into 'main'
See merge request isc-projects/bind9!9950
Adjust the limit of maximum disagreements in respdiff results based on
recent pipeline results.
The respdiff and respdiff:asan seem to have almost identical results,
typically around 0.07 % of differences with ocassional spikes up to
around 0.11 %. Similar results are for respdiff:tsan, perhaps with more
common spikes with values up to around 0.12 %. Set the limit to 0.15 %
to allow for some tolerance due to network conditions, time of day etc.
The respdiff:third-party has a slightly higher disagreements average,
with typical values being around 0.12 %. Set the limit to 0.2 %.
Exceeding either of those values should be quite clear indication that
some resolution behaviour has changed, since the values appear to be
very stable within the newly configured limits.
There was confusion about whether the interval was calculated from
the validity period provided on the command line (with -s and -e),
or from the signature being replaced.
Add text to clarify that the interval is calculated from the new
validity period.
Closes#5128
Merge branch '5128-clarify-dnssec-signzone-interval' into 'main'
See merge request isc-projects/bind9!9955
There was confusion about whether the interval was calculated from
the validity period provided on the command line (with -s and -e),
or from the signature being replaced.
Add text to clarify that the interval is calculated from the new
validity period.
In the case when `dnssec-signzone` is called on an already signed zone, and the private key file is unavailable, a signature that needs to be refreshed may be dropped without being able to generate a replacement. This has been fixed.
Closes#5126
Merge branch '5126-dnssec-signzone-retain-rrsig-if-key-is-offline' into 'main'
See merge request isc-projects/bind9!9951
Track inside the dns_dnsseckey structure whether we have seen the
private key, or if this key only has a public key file.
If the key only has a public key file, or a DNSKEY reference in the
zone, mark the key 'pubkey'. In dnssec-signzone, if the key only
has a public key available, consider the key to be offline. Any
signatures that should be refreshed for which the key is not available,
retain the signature.
So in the code, 'expired' becomes 'refresh', and the new 'expired'
is only used to determine whether we need to keep the signature if
the corresponding key is not available (retaining the signature if
it is not expired).
In the 'keysthatsigned' function, we can remove:
- key->force_publish = false;
- key->force_sign = false;
because they are redundant ('dns_dnsseckey_create' already sets these
values to false).
Add a test case for the scenario below.
There is a case when signing a zone with dnssec-signzone where the
private key file is moved outside the key directory (for offline
ksk purposes), and then the zone is resigned. The signature of the
DNSKEY needs refreshing, but is not expired.
Rather than removing the signature without having a valid replacement,
leave the signature in the zone (despite it needs to be refreshed).
If the generated status output exceeds 4096 it was silently truncated, now we output that the status was truncated.
Closes#4180
Merge branch '4180-possible-truncation-in-dns_keymgr_status' into 'main'
See merge request isc-projects/bind9!9905
Extended DNS error mechanism (EDE) may have several errors raised during a DNS resolution. `named` is now able to add up to three EDE codes in a DNS response. In the case of duplicate error codes, only the first one will be part of the DNS response.
Closes#5085
Merge branch '5085-multiple-ede' into 'main'
See merge request isc-projects/bind9!9952
Extended DNS error mechanism (EDE) enables to have several EDE raised
during a DNS resolution (typically, a DNSSEC query will do multiple
fetches which each of them can have an error). Add support to up to 3
EDE errors in an DNS response. If duplicates occur (two EDEs with the
same code, the extra text is not compared), only the first one will be
part of the DNS answer.
Because the maximum number of EDE is statically fixed, `ns_client_t`
object own a static vector of `DNS_DE_MAX_ERRORS` (instead of a linked
list, for instance). The array can be fully filled (all slots point to
an allocated `dns_ednsopt_t` object) or partially filled (or
empty). In such case, the first NULL slot means there is no more EDE
objects.
When 'ISC_R_TIMEDOUT' is received in 'tcp_recv()', it times out the
oldest response in the active responses queue, and only after that it
checks whether other active responses have also timed out. So when
setting a timeout value for a read operation after a successful
connection, it makes sense to take the timeout value from the oldest
response in the active queue too, because, theoretically, the responses
can have different timeout values, e.g. when the TCP dispatch is shared.
Currently 'resp' is always NULL. Previously when connect and read timeouts
were not separated in dispatch this affected only logging, but now since
we are setting a new timeout after a successful connection, we need to
choose a suitable response from the active queue.
Merge branch 'aram/dispatch-tcp_connected-fix' into 'main'
See merge request isc-projects/bind9!9927
Since the read timeout now works, the resolver time outs from the
dispatch level instead of from the "hung fetch" timer, and so the
EDE value in 'fctx_expired()' is not being set. Remove the expected
EDE value from the test.
When TCP is used, 'fctx_query()' adds one second to the rtt
(round-trip time) value, but there's a bug when the decision
about using TCP is made already after the calculation. Move the
block of the code which looks up the peers list to decide
whether to use TCP into a place that's before the rtt calculation
is performed. This commit doesn't add or remove any code, it just
moves the code and adds a comment block.
When 'ISC_R_TIMEDOUT' is received in 'tcp_recv()', it times out the
oldest response in the active responses queue, and only after that it
checks whether other active responses have also timed out. So when
setting a timeout value for a read operation after a successful
connection, it makes sense to take the timeout value from the oldest
response in the active queue too, because, theoretically, the responses
can have different timeout values, e.g. when the TCP dispatch is shared.
Currently 'resp' is always NULL. Previously when connect and read
timeouts were not separated in dispatch this affected only logging, but
now since we are setting a new timeout after a successful connection,
we need to choose a suitable response from the active queue.
Prevent lock contention among many worker threads referring to the same database node at the same time. This would improve zone and cache database performance for the heavily contended database nodes.
Closes#5130
Merge branch '5130-reduce-lock-contention-in-decrement-reference' into 'main'
See merge request isc-projects/bind9!9963
Previously, this function always acquires a node write lock if it
might need node cleanup in case the reference decrements to 0. In
fact, the lock is unnecessary if the reference is larger than 1 and it
can be optimized as an "easy" case. This optimization could even be
"necessary". In some extreme cases, many worker threads could repeat
acquring and releasing the reference on the same node, resulting in
severe lock contention for nothing (as the ref wouldn't decrement to 0
in most cases). This change would prevent noticeable performance
drop like query timeout for such cases.
Co-authored-by: JINMEI Tatuya <jtatuya@infoblox.com>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Shutdown the fetch context immediately after the last fetch has been canceled from
that particular fetch context.
Merge branch 'ondrej/shutdown-the-fetch-context-early' into 'main'
See merge request isc-projects/bind9!9958
Currently, the fetch context will continue running even when the last
fetch (response) has been removed from the context, so named can process
and cache the answer. This can lead to a situation where the number of
outgoing recursing clients exceeds the the configured number for
recursive-clients.
Be more stringent about the recursive-clients limit and shutdown the
fetch context immediately after the last fetch has been canceled from
that particular fetch context.
Resolver under heavy-load could exhaust the memory available for storing
the information in the Address Database (ADB) effectively evicting already
stored information in the ADB. The memory used to retrieve and provide
information from the ADB is now not a subject of the same memory limits
that are applied for storing the information in the Address Database.
Closes#5127
Merge branch '5127-change-ADB-memory-split' into 'main'
See merge request isc-projects/bind9!9954
Address Database (ADB) shares the memory for the short lived ADB
objects (finds, fetches, addrinfo) and the long lived ADB
objects (names, entries, namehooks). This could lead to a situation
where the resolver-heavy load would force evict ADB objects from the
database to point where ADB is completely empty, leading to even more
resolver-heavy load.
Make the short lived ADB objects use the other memory context that we
already created for the hashmaps. This makes the ADB overmem condition
to not be triggered by the ongoing resolver fetches.
The network manager layer has two different timers with their
own timeout values for TCP connections: connect timeout and read
timeout. Separate the connect and the read TCP timeouts in the
dispatch module too.
Closes#5009
Merge branch '5009-dispatch-separate-connect-and-read-timeouts' into 'main'
See merge request isc-projects/bind9!9698
In some places there was a limitation of the maximum timeout
value of INT16_MAX, which is only about 32 seconds. Refactor
the code to remove the limitation.
The network manager layer has two different timers with their
own timeout values for TCP connections: connect timeout and read
timeout. Separate the connect and the read TCP timeouts in the
dispatch module too.
struct fetchctx does have several fields which are now unused or confusing, removing those.
Merge branch 'colin/remove-fctx-validator' into 'main'
See merge request isc-projects/bind9!9945
struct fetchctx does have a list of pending validators as well as a
pointer to the HEAD validator. Remove the validator pointer to avoid
confusion, as there is no perticular reasons to have it directly
accessible outside of the list.
Fix DNS-over-HTTP(S) implementation issues that arise under heavy
query load. Optimize resource usage for :iscman:`named` instances
that accept queries over DNS-over-HTTP(S).
Previously, :iscman:`named` would process all incoming HTTP/2 data
at once, which could overwhelm the server, especially when dealing
with clients that send requests but don't wait for responses. That
has been fixed. Now, :iscman:`named` handles HTTP/2 data in smaller
chunks and throttles reading until the remote side reads the
response data. It also throttles clients that send too many requests
at once.
Additionally, :iscman:`named` now carefully processes data sent by
some clients, which can be considered "flooding." It logs these
clients and drops connections from them.
:gl:`#4795`
In some cases, :iscman:`named` could leave DNS-over-HTTP(S)
connections in the `CLOSE_WAIT` state indefinitely. That also has
been fixed. ISC would like to thank JF Billaud for thoroughly
investigating the issue and verifying the fix.
:gl:`#5083`
See https://gitlab.isc.org/isc-projects/bind9/-/issues/4795
Closes https://gitlab.isc.org/isc-projects/bind9/-/issues/5083
Merge branch 'artem-improve-doh-resource-usage' into 'v9.21.4-release'
See merge request isc-private/bind9!732
We started using isc_nm_bad_request() more actively throughout
codebase. In the case of HTTP/2 it can lead to a large count of
useless "Bad Request" messages in the BIND log, as often we attempt to
send such request over effectively finished HTTP/2 sessions.
This commit fixes that.
A call to isc_nm_read_stop() would always stop reading timer even in
manual timer control mode which was added with StreamDNS in mind. That
looks like an omission that happened due to how timers are controlled
in StreamDNS where we always stop the timer before pausing reading
anyway (see streamdns_on_complete_dnsmessage()). That would not work
well for HTTP, though, where we might want pause reading without
stopping the timer in the case we want to split incoming data into
multiple chunks to be processed independently.
I suppose that it happened due to NM refactoring in the middle of
StreamDNS development (at the time isc_nm_cancelread() and
isc_nm_pauseread() were removed), as the StreamDNS code seems to be
written as if timers are not stoping during a call to
isc_nm_read_stop().
This commit introduces manual read timer control as used by StreamDNS
and its underlying transports. Before that, DoH code would rely on the
timer control provided by TCP, which would reset the timer any time
some data arrived. Now, the timer is restarted only when a full DNS
message is processed in line with other DNS transports.
That change is required because we should not stop the timer when
reading from the network is paused due to throttling. We need a way to
drop timed-out clients, particularly those who refuse to read the data
we send.
This commit adds logic to make code better protected against clients
that send valid HTTP/2 data that is useless from a DNS server
perspective.
Firstly, it adds logic that protects against clients who send too
little useful (=DNS) data. We achieve that by adding a check that
eventually detects such clients with a nonfavorable useful to
processed data ratio after the initial grace period. The grace period
is limited to processing 128 KiB of data, which should be enough for
sending the largest possible DNS message in a GET request and then
some. This is the main safety belt that would detect even flooding
clients that initially behave well in order to fool the checks server.
Secondly, in addition to the above, we introduce additional checks to
detect outright misbehaving clients earlier:
The code will treat clients that open too many streams (50) without
sending any data for processing as flooding ones; The clients that
managed to send 1.5 KiB of data without opening a single stream or
submitting at least some DNS data will be treated as flooding ones.
Of course, the behaviour described above is nothing else but
heuristical checks, so they can never be perfect. At the same time,
they should be reasonable enough not to drop any valid clients,
realatively easy to implement, and have negligible computational
overhead.
Initially, our DNS-over-HTTP(S) implementation would try to process as
much incoming data from the network as possible. However, that might
be undesirable as we might create too many streams (each effectively
backed by a ns_client_t object). That is too forgiving as it might
overwhelm the server and trash its memory allocator, causing high CPU
and memory usage.
Instead of doing that, we resort to processing incoming data using a
chunk-by-chunk processing strategy. That is, we split data into small
chunks (currently 256 bytes) and process each of them
asynchronously. However, we can process more than one chunk at
once (up to 4 currently), given that the number of HTTP/2 streams has
not increased while processing a chunk.
That alone is not enough, though. In addition to the above, we should
limit the number of active streams: these streams for which we have
received a request and started processing it (the ones for which a
read callback was called), as it is perfectly fine to have more opened
streams than active ones. In the case we have reached or surpassed the
limit of active streams, we stop reading AND processing the data from
the remote peer. The number of active streams is effectively decreased
only when responses associated with the active streams are sent to the
remote peer.
Overall, this strategy is very similar to the one used for other
stream-based DNS transports like TCP and TLS.
When answering queries, don't add data to the additional section if the answer has more than 13 names in the RDATA. This limits the number of lookups into the database(s) during a single client query, reducing query processing load.
See isc-projects/bind9#5034
Merge branch '5034-security-limit-additional' into 'v9.21.4-release'
See merge request isc-private/bind9!750
Limit the number of records appended to ADDITIONAL section to the names
that have less than 14 records in the RDATA. This limits the number
of the lookups into the database(s) during single client query.
Also don't append any additional data to ANY queries. The answer to ANY
is already big enough.
Instead of running the whole resolver/ns4 server with -T noaa flag,
use it only for the part where it is actually needed. The -T noaa
could interfere with other parts of the test because the answers don't
have the authoritative-answer bit set, and we could have false
positives (or false negatives) in the test because the authoritative
server doesn't follow the DNS protocol for all the tests in the resolver
system test.
All the database implementations share the same names for the methods
implementing the database. That has some advantages like knowing what
to expect, but it turns out that any time such method shows up in any
kind of tracing - be it perf record, backtrace or anything else that
uses symbol names, it is very hard to distinguish whether the find()
belongs to qpcache, qpzone, builtin or sdlz implementation.
Make at least the names for qpzone and qpcache unique.
A bug in the qpzone database could trigger a crash when querying for a deleted name, or a newly-added empty non-terminal name, in an NSEC3-signed zone. This has been fixed.
Closes#5108
Merge branch '5108-nsec3-empty-node' into 'main'
See merge request isc-projects/bind9!9928
there was a database bug in which dns_db_find() could get a partial
match for the query name, but still set foundname to match the full
query name. this triggered an assertion when query_addwildcardproof()
assumed that foundname would be shorter.
the database bug has been fixed, but in case it happens again, we
can just copy the name instead of splitting it. we will also log a
warning that the closest-encloser name was invalid.
when adding a new NSEC3 record, dns_nsec3_addnsec3() uses a
dbiterator to seek to the newly created node and then find its
predecessor. dbiterators in the qpzone use snapshots, so changes
to the database are not reflected in an already-existing iterator.
consequently, when we add a new node, we have to create a new iterator
before we can seek to it.
this test adds a record with empty non-terminal nodes above it. this
has also been observed to trigger the crash in NSEC3 zones.
NOTE: the test currently fails, because while there is no crash, the
query results are not as expected. when we add a node below an ENT,
receive_secure_serial() gets DNS_R_PARTIALMATCH, and the signed
zone is never updated. this is not a regression from fixing the
crash bug; it's a separate inline-signing bug.
test that there's no crash when querying for a newly-deleted node.
(incidentally also renamed ns3/named.conf.in to ns3/named1.conf.in,
because named2.conf.in does exist, and they should match.)
when a requested name is found in the QP trie during a lookup, but its
records have been marked as nonexistent by a previous deletion, then
it's treated as a partial match, but the foundname could be left
pointing to the original qname rather than the parent. this could
lead to an assertion failure in query_findclosestnsec3().
Commit b121f02eac renamed the top-level
"primaries" block in bin/named/config.c to "remote-servers". This
configuration block lists the primary servers used for an IANA root zone
mirror when no primary servers are explicitly specified for it in the
configuration. However, the relevant part of the named_zone_configure()
function only looks for a top-level "primaries" block and not for any of
its synonyms. As a result, configuring an IANA root zone mirror with
just:
zone "." {
type mirror;
};
now results in a cryptic fatal error on startup:
loading configuration: not found
exiting (due to fatal error)
Fix by using the correct top-level block name in named_zone_configure().
Response policy zones (RPZ) and catalog zones were not working correctly if they had an $INCLUDE statement defined. This has been fixed.
Closes#5111
Merge branch '5111-includes-disable-rpz-and-catz-fix' into 'main'
See merge request isc-projects/bind9!9930
The code in zone_startload() disables RPZ and CATZ for a zone if
dns_master_loadfile() returns anything other than ISC_R_SUCCESS,
which makes sense, but it's an error because zone_startload() can
also return DNS_R_SEENINCLUDE upon success when the zone had an
$INCLUDE statement.
Add performance tests of DoH using the GET protocol to nightly pipelines.
Merge branch 'nicki/ci-shotgun-doh-get' into 'main'
See merge request isc-projects/bind9!9926
Adjust number of zones down to 23 to match those present when testing in FIPS mode.
Closes#5097
Merge branch '5097-checking-startup-notify-rate-limit-fails-on-ol-8-fips' into 'main'
See merge request isc-projects/bind9!9919
Debug messages logging network traffic now include information about both sides of each communication channel rather than just one of them.
Closes#4345
Merge branch '4345-log-both-from-and-to-socket-in-debug-messages' into 'main'
See merge request isc-projects/bind9!8349
Ensure the log prefixes passed to the dns_message_logpacketfrom()
function by its callers do not include the word "from" as the latter is
now emitted by the logfmtpacket() helper function.
Ensure the log prefixes passed to the dns_message_logpacketfromto()
function by its callers do not include the words "from" or "to" as those
are now emitted by the logfmtpacket() helper function.
Move dns_dispentry_getlocaladdress() calls around so that they are not
only invoked when dnstap support is compiled in. This function calls
isc_nmhandle_localaddr(), which may issue a system call, but only if the
ISC_SOCKET_DETAILS preprocessor macro is set at compile time.
Pass the value extracted by dns_dispentry_getlocaladdress() to
dns_message_logpacketfromto() so that it gets logged, adding useful
information to the relevant debug messages.
Since dns_message_logpacket() only takes a single socket address as a
parameter (and it is always the sending socket's address), rename it to
dns_message_logpacketfrom() so that its name better conveys its purpose
and so that the difference in purpose between this function and
dns_message_logpacketfromto() becomes more apparent.
Since dns_message_logfmtpacket() needs to be provided with both "from"
and "to" socket addresses, rename it to dns_message_logpacketfromto() so
that its name better conveys its purpose. Clean up the code comments
for that function.
Change the function prototype for dns_message_logfmtpacket() so that it
takes two isc_sockaddr_t parameters: one for the sending side and
another one for the receiving side. This enables debug messages to be
more precise.
Also adjust the function prototype for logfmtpacket() accordingly.
Unlike dns_message_logfmtpacket(), this function must not require both
'from' and 'to' parameters to be non-NULL as it is still going to be
used by dns_message_logpacket(), which only provides a single socket
address. Adjust its log format to handle both of these cases properly.
Adjust both dns_message_logfmtpacket() call sites accordingly, without
actually providing the second socket address yet. (This causes the
revised REQUIRE() assertion in dns_message_logfmtpacket() to fail; the
issue will be addressed in a separate commit.)
Both existing callers of the dns_message_logfmtpacket() function set the
argument passed as 'style' to &dns_master_style_comment. To simplify
these call sites, drop the 'style' parameter from the prototype for
dns_message_logfmtpacket() and use a fixed value of
&dns_master_style_comment in the function's body instead.
All callers of the logfmtpacket() helper function require the argument
passed as 'address' to be non-NULL. Meanwhile, the 'newline' and
'space' local variables in logfmtpacket() are only set to values
different than their initial values if the 'address' parameter is NULL.
Replace the 'newline' and 'space' local variables in logfmtpacket() with
fixed strings to improve code readability.
Enable extracting the exact address/port that a local wildcard/TCP socket is bound to, improving the accuracy of dnstap logging and providing more information in debug logs produced by system tests. Since this requires issuing an extra system call on some hot paths, this new feature is only enabled when the ``ISC_SOCKET_DETAILS`` preprocessor macro is set at compile time.
Closes#4344
Merge branch '4344-enable-extraction-of-exact-local-socket-addresses' into 'main'
See merge request isc-projects/bind9!8348
Extracting the exact address that each wildcard/TCP socket is bound to
locally requires issuing the getsockname() system call, which libuv
exposes via its uv_*_getsockname() functions. This is only required for
detailed logging and comes at a noticeable performance cost, so it
should not happen by default. However, it is useful for debugging
certain problems (e.g. cryptic system test failures), so a convenient
way of enabling that behavior should exist.
Update isc_nmhandle_localaddr() so that it calls uv_*_getsockname() when
the ISC_SOCKET_DETAILS preprocessor macro is set at compile time.
Ensure proper handling of sockets that wrap other sockets.
Set the new ISC_SOCKET_DETAILS macro by default when --enable-developer
is passed to ./configure. This enables detailed logging in the system
tests run in GitLab CI without affecting performance in non-development
BIND 9 builds.
Note that setting the ISC_SOCKET_DETAILS preprocessor macro at compile
time enables all callers of isc_nmhandle_localaddr() to extract the
exact address of a given local socket, which results e.g. in dnstap
captures containing more accurate information.
Mention the new preprocessor macro in the section of the ARM that
discusses why exact socket addresses may not be logged by default.
This MR is a prerequisite for !8348.
It intentionally does not have a changelog entry associated with it, to
prevent making a false impression of improving connection reuse **for
existing code**. It will only make a difference once !8348 gets merged
(and even then, only if the new `ISC_SOCKET_DETAILS` macro will be set
during build). That's because `isc_nmhandle_localaddr()` currently
simply returns `handle->local` and its return value will only be set to
the actual address the socket is bound to with !8348 in place.
Note that `dns_dispatch_gettcp()` is currently only used by the
`dns_request` API, so this MR's potential for introducing new breakage
is relatively low.
Closes#4693
Merge branch '4693-improve-reuse-of-outgoing-tcp-connections' into 'main'
See merge request isc-projects/bind9!8972
The dns_dispatch_gettcp() function is used for finding an existing TCP
connection that can be reused for sending a query from a specified local
address to a specified remote address. The logic for matching the
provided <local address, remote address> tuple to one of the existing
TCP connections is implemented in the dispatch_match() function:
- if the examined TCP connection already has a libuv handle assigned,
it means the connection has already been established; therefore,
compare the provided <local address, remote address> tuple against
the corresponding address tuple for the libuv handle associated with
the connection,
- if the examined TCP connection does not yet have a libuv handle
assigned, it means the connection has not yet been established;
therefore, compare the provided <local address, remote address>
tuple against the corresponding address tuple that the TCP
connection was originally created for.
This logic limits TCP connection reuse potential as the libuv handle
assigned to an existing dispatch object may have a more specific local
<address, port> tuple associated with it than the local <address, port>
tuple that the dispatch object was originally created for. That's
because the local address for outgoing connections can be set to a
wildcard <address, port> tuple (indicating that the caller does not care
what source <address, port> tuple will be used for establishing the
connection, thereby delegating the task of picking it to the operating
system) and then get "upgraded" to a specific <address, port> tuple when
the socket is bound (and a libuv handle gets associated with it). When
another dns_dispatch_gettcp() caller then tries to look for an existing
TCP connection to the same peer and passes a wildcard address in the
local part of the tuple, the function will not match that request to a
previously-established TCP connection (unless isc_nmhandle_localaddr()
returns a wildcard address as well).
Simplify dispatch_match() so that the libuv handle associated with an
existing dispatch object is not examined for the purpose of matching it
to the provided <local address, remote address> tuple; instead, always
examine the <local address, remote address> tuple that the dispatch
object was originally created for. This enables reuse of TCP
connections created without providing a specific local socket address
while still preventing other connections (created for a specific local
socket address) from being inadvertently shared.
This change ensures that SNI extension is used in outgoing connections over TLS (e.g. for DoT and DoH) when applicable.
Closes#5099
Merge branch 'artem-outgoing-tls-sni-support' into 'main'
See merge request isc-projects/bind9!9923
This commit ensures that BIND enables TLS SNI support for outgoing DoT
connections (when possible) in order to improve compatibility with
other DNS server software.
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
ThreadSanitizer has trouble understanding that gluelist->glue is
constant after it is assigned to the slabheader with cmpxchg. Help
ThreadSanitizer to understand the code by using CMM_STORE_SHARED and
CMM_LOAD_SHARED on gluelist->glue.
Merge branch 'ondrej/hint-tsan-in-addglue' into 'main'
See merge request isc-projects/bind9!9929
Previously, we had an ISC_CONSTEXPR macro that was expanded to either
`constexpr` or `static const`, depending on compiler support. To make
the code cleaner, move `constexpr` support detection to Autoconf; if
`constexpr` support is missing from the compiler, define `constexpr` as
`static const` in config.h.
Merge branch 'ondrej/rename-ISC_CONSTEXPR-to-constexpr-shim' into 'main'
See merge request isc-projects/bind9!9924
Previously, we had an ISC_CONSTEXPR macro that was expanded to either
`constexpr` or `static const`, depending on compiler support. To make
the code cleaner, move `constexpr` support detection to Autoconf; if
`constexpr` support is missing from the compiler, define `constexpr` as
`static const` in config.h.
Since BIND 9 headers are not longer public, there's no reason to keep
the ISC_LANG_BEGINDECL and ISC_LANG_ENDDECL macros to support including
them from C++ projects.
Merge branch 'ondrej/remove-C++-header-support' into 'main'
See merge request isc-projects/bind9!9925
Since BIND 9 headers are not longer public, there's no reason to keep
the ISC_LANG_BEGINDECL and ISC_LANG_ENDDECL macros to support including
them from C++ projects.
2024-12-18 13:10:39 +01:00
473 changed files with 6945 additions and 5014 deletions
- [ ] [:link:][step_deputy] **(IM)** Pick a Deputy Incident Manager
- [ ] [:link:][step_respond] **(IM)** Respond to the bug reporter
- [ ] [:link:][step_public_mrs] **(SwEng)** Ensure there are no public merge requests which inadvertently disclose the issue
- [ ] [:link:][step_coordinate_cve_id] **(SwEng)** Check if we need to coordinate with other vendors (an industry-wide CVE identifier might be necessary)
- [ ] [:link:][step_assign_cve_id] **(IM)** Assign a CVE identifier
- [ ] [:link:][step_note_cve_info] **(SwEng)** Update this issue with the assigned CVE identifier, the CVSS score, and CWE category
- [ ] [:link:][step_note_cve_info] **(SwEng)** Update this issue with the assigned CVE identifier, the CVSS score, and the CWE category
- [ ] [:link:][step_versions_affected] **(SwEng)** Determine the range of product versions affected (including the Subscription Edition)
- [ ] [:link:][step_workarounds] **(SwEng)** Determine whether workarounds for the problem exist
- [ ] [:link:][step_coordinate] **(SwEng)** If necessary, coordinate with other parties
- [ ] [:link:][step_earliest_prepare] **(Support)** Prepare "earliest" notification text
- [ ] [:link:][step_earliest_send] **(Support)** Update "earliest" notification ticket in support portal Earliest queue which will notify earliest customers
- [ ] [:link:][step_advisory_mr] **(Support)** Create a merge request for the Security Advisory and include all readily available information in it
@@ -48,6 +48,7 @@ confidential!
- [ ] [:link:][step_backports] **(SwEng)** Prepare backports of the merge request addressing the problem for all affected (and still maintained) branches of a given product
- [ ] [:link:][step_finish_advisory] **(Support)** Finish preparing the Security Advisory
- [ ] [:link:][step_meta_issue] **(QA)** Create (or update) the private issue containing links to fixes & reproducers for all CVEs fixed in a given release cycle
- [ ] [:link:][step_coordinate_check] **(SwEng)** Make sure other vendors are able to release on the date that was previously agreed upon
- [ ] [:link:][step_merge_fixes] **(QA)** Merge the CVE fixes in CVE identifier order
- [ ] [:link:][step_patches] **(QA)** Prepare a standalone patch for the last stable release of each affected (and still maintained) product branch
- [ ] [:link:][step_asn_releases] **(QA)** Prepare ASN releases (as outlined in the Release Checklist)
@@ -68,15 +69,15 @@ confidential!
### On the Day of Public Disclosure
- [ ] [:link:][step_clearance] **(IM)** Grant QA & Marketing clearance to proceed with public release
- [ ] [:link:][step_publish] **(QA/Marketing)** Publish the releases (as outlined in the release checklist)
- [ ] [:link:][step_matrix] **(Support)** (BIND 9 only) Add the new CVEs to the vulnerability matrix in the Knowledge Base
- [ ] [:link:][step_publish_advisory] **(Support)** Bump Document Version for the Security Advisory and publish it in the Knowledge Base
- [ ] [:link:][step_publish] **(QA/Marketing)** Publish the releases (as outlined in the release checklist)
- [ ] [:link:][step_notifications] **(First IM)** Send notification emails to third parties
- [ ] [:link:][step_mitre] **(First IM)** Advise MITRE about the disclosed CVEs
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Evan Hunt
Mark Andrews
Michal Nowak
Andoni Duarte
Ondřej Surý
Nicki KřížekandMichal Nowak
Arаm Sаrgsyаn
Petr Špaček
Michał Kępień
Colin Vidal
Aydın Mercan
Matthijs Mekking
JINMEI TatuyaandOndřej Surý
Artem BoldarievandAndoni Duarte
Artem Boldariev