This commit was manufactured by cvs2git to create tag 'v9_2_3'.

failure in isc_mem_put() during error cleanup.

.cvsignore

@@ -0,0 +1,7 @@
+Makefile
+config.log
+config.h
+config.cache
+config.status
+libtool
+isc-config.sh

.gitattributes

@@ -1,3 +0,0 @@
-*.sln.in eol=crlf
-*.vcxproj.in eol=crlf
-*.vcxproj.filters.in eol=crlf

.gitignore

@@ -1,52 +0,0 @@
-Makefile
-config.log
-config.h
-config.cache
-config.status
-libtool
-/isc-config.sh
-/configure.lineno
-autom4te.cache/
-*.o
-*.lo
-*.so
-*.a
-*.la
-*_test
-*-symtbl.c
-timestamp
-named.run
-gen.dSYM/
-.libs/
-.deps/
-.dirstamp
-unit/atf-src/atf-c++/atf-c++.pc
-unit/atf-src/atf-c/atf-c.pc
-unit/atf-src/atf-c/defs.h
-unit/atf-src/atf-c/detail/process_helpers
-unit/atf-src/atf-config/atf-config
-unit/atf-src/atf-report/atf-report
-unit/atf-src/atf-report/fail_helper
-unit/atf-src/atf-report/misc_helpers
-unit/atf-src/atf-report/pass_helper
-unit/atf-src/atf-run/atf-run
-unit/atf-src/atf-run/bad_metadata_helper
-unit/atf-src/atf-run/expect_helpers
-unit/atf-src/atf-run/misc_helpers
-unit/atf-src/atf-run/pass_helper
-unit/atf-src/atf-run/several_tcs_helper
-unit/atf-src/atf-run/zero_tcs_helper
-unit/atf-src/atf-sh/atf-check
-unit/atf-src/atf-sh/atf-sh
-unit/atf-src/atf-sh/misc_helpers
-unit/atf-src/atf-version/atf-version
-unit/atf-src/atf-version/revision.h
-unit/atf-src/atf-version/revision.h.stamp
-unit/atf-src/bconfig.h
-unit/atf-src/bootstrap/atconfig
-unit/atf-src/doc/atf.7
-unit/atf-src/stamp-h1
-unit/atf-src/test-programs/c_helpers
-unit/atf-src/test-programs/cpp_helpers
-unit/atf-src/test-programs/sh_helpers
-bin/named/named

.gitlab-ci.yml

@@ -1,207 +0,0 @@
-variables:
-  DEBIAN_FRONTEND: noninteractive
-  LC_ALL: C
-  DOCKER_DRIVER: overlay2
-  CI_REGISTRY_IMAGE: oerdnj/bind9
-  CCACHE_DIR: "/ccache"
-
-stages:
-  - precheck
-  - build
-  - test
-
-.debian-jessie-amd64: &debian_jessie_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-jessie-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-jessie-i386: &debian_jessie_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-jessie-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.debian-stretch-amd64: &debian_stretch_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-stretch-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-stretch-i386:: &debian_stretch_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-stretch-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.debian-buster-amd64: &debian_buster_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-buster-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-buster-i386:: &debian_buster_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-buster-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.debian-sid-amd64: &debian_sid_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-sid-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-sid-i386: &debian_sid_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-sid-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.ubuntu-trusty-amd64: &ubuntu_trusty_amd64_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-trusty-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.ubuntu-trusty-i386: &ubuntu_trusty_i386_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-trusty-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.ubuntu-xenial-amd64: &ubuntu_xenial_amd64_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-xenial-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.ubuntu-xenial-i386: &ubuntu_xenial_i386_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-xenial-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.build: &build_job
-  stage: build
-  before_script:
-    - test -w "${CCACHE_DIR}" && export PATH="/usr/lib/ccache:${PATH}"
-    - autoreconf -fi
-  script:
-    - ./configure --enable-developer --with-libtool --disable-static --with-atf=/usr/local
-    - make -j${PARALLEL_JOBS_BUILD:-1} -k all V=1
-  artifacts:
-    expire_in: '1 hour'
-    untracked: true
-
-.system_test: &system_test_job
-  stage: test
-  before_script:
-    - rm -rf .ccache
-    - bash -x bin/tests/system/ifconfig.sh up
-  script:
-    - ( cd bin/tests && make -j${TEST_PARALLEL_JOBS:-1} -k test V=1 )
-    - test -s bin/tests/system/systests.output
-  artifacts:
-    untracked: true
-    expire_in: '1 week'
-    when: on_failure
-
-.unit_test: &unit_test_job
-  stage: test
-  before_script:
-    - export KYUA_RESULT="$CI_PROJECT_DIR/kyua.results"
-  script:
-    - make unit
-  after_script:
-    - kyua report-html --force --results-file kyua.results --results-filter "" --output kyua_html
-  artifacts:
-    paths:
-    - atf.out
-    - kyua.log
-    - kyua.results
-    - kyua_html/
-    expire_in: '1 week'
-    when: on_failure
-
-precheck:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  stage: precheck
-  script:
-    - perl util/check-changes CHANGES
-    - perl -w util/merge_copyrights
-    - diff -urNap util/copyrights util/newcopyrights
-    - rm util/newcopyrights
-  artifacts:
-    paths:
-    - util/newcopyrights
-    expire_in: '1 week'
-    when: on_failure
-
-#build:debian:jessie:amd64:
-#  <<: *debian_jessie_amd64_image
-#  <<: *build_job
-#
-#build:debian:jessie:i386:
-#  <<: *debian_jessie_i386_image
-#  <<: *build_job
-#
-#build:debian:stretch:amd64:
-#  <<: *debian_stretch_amd64_image
-#  <<: *build_job
-#
-#build:debian:buster:i386:
-#  <<: *debian_buster_i386_image
-#  <<: *build_job
-#
-#build:ubuntu:trusty:amd64:
-#  <<: *ubuntu_trusty_amd64_image
-#  <<: *build_job
-#
-#build:ubuntu:xenial:i386:
-#  <<: *ubuntu_xenial_i386_image
-#  <<: *build_job
-
-build:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  <<: *build_job
-    
-build:debian:sid:i386:
-  <<: *debian_sid_i386_image
-  <<: *build_job
-
-unittest:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  <<: *unit_test_job
-  dependencies:
-    - build:debian:sid:amd64
-    
-unittest:debian:sid:i386:
-  <<: *debian_sid_i386_image
-  <<: *unit_test_job
-  dependencies:
-    - build:debian:sid:i386
-
-systemtest:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  <<: *system_test_job
-  dependencies:
-    - build:debian:sid:amd64
-    
-systemtest:debian:sid:i386:
-  <<: *debian_sid_i386_image
-  <<: *system_test_job
-  dependencies:
-    - build:debian:sid:i386

Atffile

@@ -1,5 +0,0 @@
-Content-Type: application/X-atf-atffile; version="1"
-
-prop: test-suite = bind9
-
-tp: lib

CONTRIBUTING

@@ -1,186 +0,0 @@
-BIND Source Access and Contributor Guidelines
-
-Feb 22, 2018
-
-Contents
-
- 1. Access to source code
- 2. Reporting bugs
- 3. Contributing code
-
-Introduction
-
-Thank you for using BIND!
-
-BIND is open source software that implements the Domain Name System (DNS)
-protocols for the Internet. It is a reference implementation of those
-protocols, but it is also production-grade software, suitable for use in
-high-volume and high-reliability applications. It is by far the most
-widely used DNS software, providing a robust and stable platform on top of
-which organizations can build distributed computing systems with the
-knowledge that those systems are fully compliant with published DNS
-standards.
-
-BIND is and will always remain free and openly available. It can be used
-and modified in any way by anyone.
-
-BIND is maintained by the Internet Systems Consortium, a public-benefit
-501(c)(3) nonprofit, using a "managed open source" approach: anyone can
-see the source, but only ISC employees have commit access. Until recently,
-the source could only be seen once ISC had published a release: read
-access to the source repository was restricted just as commit access was.
-That's now changing, with the opening of a public git mirror to the BIND
-source tree (see below).
-
-Access to source code
-
-Public BIND releases are always available from the ISC FTP site.
-
-A public-access GIT repository is also available at https://gitlab.isc.org
-. This repository is a mirror, updated several times per day, of the
-source repository maintained by ISC. It contains all the public release
-branches; upcoming releases can be viewed in their current state at any
-time. It does not contain development branches or unreviewed work in
-progress. Commits which address security vulnerablilities are withheld
-until after public disclosure.
-
-You can browse the source online via https://gitlab.isc.org/isc-projects/
-bind9
-
-To clone the repository, use:
-
-      $ git clone https://gitlab.isc.org/isc-projects/bind9.git
-
-Release branch names are of the form v9_X, where X represents the second
-number in the BIND 9 version number. So, to check out the BIND 9.12
-branch, use:
-
-      $ git checkout v9_12
-
-Whenever a branch is ready for publication, a tag will be placed of the
-form v9_X_Y. The 9.12.0 release, for instance, is tagged as v9_12_0.
-
-The branch in which the next major release is being developed is called
-master.
-
-Reporting bugs
-
-Reports of flaws in the BIND package, including software bugs, errors in
-the documentation, missing files in the tarball, suggested changes or
-requests for new features, etc, can be filed using https://gitlab.isc.org/
-isc-projects/bind9/issues.
-
-Due to a large ticket backlog, we are sometimes slow to respond,
-especially if a bug is cosmetic or if a feature request is vague or low in
-priority, but we will try at least to acknowledge legitimate bug reports
-within a week.
-
-ISC's ticketing system is publicly readable; however, you must have an
-account to file a new issue. You can either register locally or use
-credentials from an existing account at GitHub, GitLab, Google, Twitter,
-or Facebook.
-
-Reporting possible security issues
-
-If you think you may be seeing a potential security vulnerability in BIND
-(for example, a crash with REQUIRE, INSIST, or ASSERT failure), please
-report it immediately by emailing to security-officer@isc.org. Plain-text
-e-mail is not a secure choice for communications concerning undisclosed
-security issues so please encrypt your communications to us if possible,
-using the ISC Security Officer public key.
-
-Do not discuss undisclosed security vulnerabilites on any public mailing
-list. ISC has a long history of handling reported vulnerabilities promptly
-and effectively and we respect and acknowledge responsible reporters.
-
-ISC's Security Vulnerability Disclosure Policy is documented at https://
-kb.isc.org/article/AA-00861/0.
-
-If you have a crash, you may want to consult ?What to do if your BIND or
-DHCP server has crashed.?
-
-Contributing code
-
-BIND is licensed under the Mozilla Public License 2.0. Earier versions
-(BIND 9.10 and earlier) were licensed under the ISC License
-
-ISC does not require an explicit copyright assignment for patch
-contributions. However, by submitting a patch to ISC, you implicitly
-certify that you are the author of the code, that you intend to reliquish
-exclusive copyright, and that you grant permission to publish your work
-under the open source license used for the BIND version(s) to which your
-patch will be applied.
-
-BIND code
-
-Patches for BIND may be submitted directly via merge requests in ISC's
-Gitlab source repository for BIND.
-
-Patches can also be submitted as diffs against a specific version of BIND
--- preferably the current top of the master branch. Diffs may be generated
-using either git format-patch or git diff.
-
-Those wanting to write code for BIND may be interested in the developer
-information page, which includes information about BIND design and coding
-practices, including discussion of internal APIs and overall system
-architecture. (This is a work in progress, and still quite preliminary.)
-
-Every patch submitted will be reviewed by ISC engineers following our code
-review process before it is merged.
-
-It may take considerable time to review patch submissions, especially if
-they don't meet ISC style and quality guidelines. If a patch is a good
-idea, we can and will do additional work to bring it up to par, but if
-we're busy with other work, it may take us a long time to get to it.
-
-To ensure your patch is acted on as promptly as possible, please:
-
-  * Try to adhere to the BIND 9 coding style.
-  * Run make check to ensure your change hasn't caused any functional
-    regressions.
-  * Document your work, both in the patch itself and in the accompanying
-    email.
-  * In patches that make non-trivial functional changes, include system
-    tests if possible; when introducing or substantially altering a
-    library API, include unit tests. See Testing for more information.
-
-Changes to configure
-
-If you need to make changes to configure, you should not edit it directly;
-instead, edit configure.in, then run autoconf. Similarly, instead of
-editing config.h.in directly, edit configure.in and run autoheader.
-
-When submitting a patch as a diff, it's fine to omit the configure diffs
-to save space. Just send the configure.in diffs and we'll generate the new
-configure during the review process.
-
-Documentation
-
-All functional changes should be documented. There are three types of
-documentation in the BIND source tree:
-
-  * Man pages are kept alongside the source code for the commands they
-    document, in files ending in .docbook; for example, the named man page
-    is bin/named/named.docbook.
-  * The BIND 9 Administrator Reference Manual is mostly in doc/arm/
-    Bv9ARM-book.xml, plus a few other XML files that are included in it.
-  * API documentation is in the header file describing the API, in
-    Doxygen-formatted comments.
-
-It is not necessary to edit any documentation files other than these; all
-PDF, HTML, and nroff-format man page files will be updated automatically
-from the docbook and XML files after merging.
-
-Patches to improve existing documentation are also very welcome!
-
-Tests
-
-BIND is a large and complex project. We rely heavily on continuous
-automated testing and cannot merge new code without adequate test
-coverage. Please see the 'Testing' section of doc/dev/dev.md for more
-information.
-
-Thanks
-
-Thank you for your interest in contributing to the ongoing development of
-BIND.

CONTRIBUTING.md

@@ -1,206 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-## BIND Source Access and Contributor Guidelines
-*Feb 22, 2018*
-
-### Contents
-
-1. [Access to source code](#access)
-1. [Reporting bugs](#bugs)
-1. [Contributing code](#contrib)
-
-### Introduction
-
-Thank you for using BIND!
-
-BIND is open source software that implements the Domain Name System (DNS)
-protocols for the Internet. It is a reference implementation of those
-protocols, but it is also production-grade software, suitable for use in
-high-volume and high-reliability applications.  It is by far the most
-widely used DNS software, providing a robust and stable platform on top of
-which organizations can build distributed computing systems with the
-knowledge that those systems are fully compliant with published DNS
-standards.
-
-BIND is and will always remain free and openly available.  It can be
-used and modified in any way by anyone.
-
-BIND is maintained by the [Internet Systems Consortium](https://www.isc.org),
-a public-benefit 501(c)(3) nonprofit, using a "managed open source" approach:
-anyone can see the source, but only ISC employees have commit access.
-Until recently, the source could only be seen once ISC had published
-a release: read access to the source repository was restricted just
-as commit access was.  That's now changing, with the opening of a
-public git mirror to the BIND source tree (see below).
-
-### <a name="access"></a>Access to source code
-
-Public BIND releases are always available from the
-[ISC FTP site](ftp://ftp.isc.org/isc/bind9).
-
-A public-access GIT repository is also available at
-[https://gitlab.isc.org](https://gitlab.isc.org).
-This repository is a mirror, updated several times per day, of the
-source repository maintained by ISC.  It contains all the public release
-branches; upcoming releases can be viewed in their current state at any
-time.  It does *not* contain development branches or unreviewed work in
-progress.  Commits which address security vulnerablilities are withheld
-until after public disclosure.
-
-You can browse the source online via
-[https://gitlab.isc.org/isc-projects/bind9](https://gitlab.isc.org/isc-projects/bind9)
-
-To clone the repository, use:
-
->       $ git clone https://gitlab.isc.org/isc-projects/bind9.git
-
-Release branch names are of the form `v9_X`, where X represents the second
-number in the BIND 9 version number.  So, to check out the BIND 9.12
-branch, use:
-
->       $ git checkout v9_12
-
-Whenever a branch is ready for publication, a tag will be placed of the
-form `v9_X_Y`.  The 9.12.0 release, for instance, is tagged as `v9_12_0`.
-
-The branch in which the next major release is being developed is called
-`master`.
-
-### <a name="bugs"></a>Reporting bugs
-
-Reports of flaws in the BIND package, including software bugs, errors
-in the documentation, missing files in the tarball, suggested changes
-or requests for new features, etc, can be filed using
-[https://gitlab.isc.org/isc-projects/bind9/issues](https://gitlab.isc.org/isc-projects/bind9/issues).
-
-Due to a large ticket backlog, we are sometimes slow to respond,
-especially if a bug is cosmetic or if a feature request is vague or
-low in priority, but we will try at least to acknowledge legitimate
-bug reports within a week.
-
-ISC's ticketing system is publicly readable; however, you must have
-an account to file a new issue. You can either register locally or
-use credentials from an existing account at GitHub, GitLab, Google,
-Twitter, or Facebook.
-
-### Reporting possible security issues
-If you think you may be seeing a potential security vulnerability in BIND
-(for example, a crash with REQUIRE, INSIST, or ASSERT failure), please
-report it immediately by emailing to security-officer@isc.org. Plain-text
-e-mail is not a secure choice for communications concerning undisclosed
-security issues so please encrypt your communications to us if possible,
-using the [ISC Security Officer public key](https://www.isc.org/downloads/software-support-policy/openpgp-key/).
-
-Do not discuss undisclosed security vulnerabilites on any public mailing list.
-ISC has a long history of handling reported vulnerabilities promptly and
-effectively and we respect and acknowledge responsible reporters.
-
-ISC's Security Vulnerability Disclosure Policy is documented at [https://kb.isc.org/article/AA-00861/0](https://kb.isc.org/article/AA-00861/0).
-
-If you have a crash, you may want to consult
-[‘What to do if your BIND or DHCP server has crashed.’](https://kb.isc.org/article/AA-00340/89/What-to-do-if-your-BIND-or-DHCP-server-has-crashed.html)
-
-### <a name="bugs"></a>Contributing code
-
-BIND is licensed under the
-[Mozilla Public License 2.0](http://www.isc.org/downloads/software-support-policy/isc-license/).
-Earier versions (BIND 9.10 and earlier) were licensed under the [ISC License](http://www.isc.org/downloads/software-support-policy/isc-license/)
-
-ISC does not require an explicit copyright assignment for patch
-contributions.  However, by submitting a patch to ISC, you implicitly
-certify that you are the author of the code, that you intend to reliquish
-exclusive copyright, and that you grant permission to publish your work
-under the open source license used for the BIND version(s) to which your
-patch will be applied.
-
-#### <a name="bind"></a>BIND code
-
-Patches for BIND may be submitted directly via merge requests in
-[ISC's Gitlab](https://gitlab.isc.org/isc-projects/bind9/) source
-repository for BIND.
-
-Patches can also be submitted as diffs against a specific version of
-BIND -- preferably the current top of the `master` branch.  Diffs may
-be generated using either `git format-patch` or `git diff`.
-
-Those wanting to write code for BIND may be interested in the
-[developer information](doc/dev/dev.md) page, which includes information
-about BIND design and coding practices, including discussion of internal
-APIs and overall system architecture.  (This is a work in progress, and
-still quite preliminary.)
-
-Every patch submitted will be reviewed by ISC engineers following our
-[code review process](doc/dev/dev.md#reviews) before it is merged.
-
-It may take considerable time to review patch submissions, especially if
-they don't meet ISC style and quality guidelines.  If a patch is a good
-idea, we can and will do additional work to bring it up to par, but if
-we're busy with other work, it may take us a long time to get to it.
-
-To ensure your patch is acted on as promptly as possible, please:
-
-* Try to adhere to the [BIND 9 coding style](doc/dev/style.md).
-* Run `make` `check` to ensure your change hasn't caused any
-  functional regressions.
-* Document your work, both in the patch itself and in the
-  accompanying email.
-* In patches that make non-trivial functional changes, include system
-  tests if possible; when introducing or substantially altering a
-  library API, include unit tests. See [Testing](doc/dev/dev.md#testing)
-  for more information.
-
-##### Changes to `configure`
-
-If you need to make changes to `configure`, you should not edit it
-directly; instead, edit `configure.in`, then run `autoconf`.  Similarly,
-instead of editing `config.h.in` directly, edit `configure.in` and run
-`autoheader`.
-
-When submitting a patch as a diff, it's fine to omit the `configure`
-diffs to save space.  Just send the `configure.in` diffs and we'll
-generate the new `configure` during the review process.
-
-##### Documentation
-
-All functional changes should be documented. There are three types
-of documentation in the BIND source tree:
-
-* Man pages are kept alongside the source code for the commands
-  they document, in files ending in `.docbook`; for example, the
-  `named` man page is `bin/named/named.docbook`.
-* The *BIND 9 Administrator Reference Manual* is mostly in
-  `doc/arm/Bv9ARM-book.xml`, plus a few other XML files that are included
-  in it.
-* API documentation is in the header file describing the API, in
-  Doxygen-formatted comments.
-
-It is not necessary to edit any documentation files other than these;
-all PDF, HTML, and `nroff`-format man page files will be updated
-automatically from the `docbook` and `XML` files after merging.
-
-Patches to improve existing documentation are also very welcome!
-
-##### Tests
-
-BIND is a large and complex project. We rely heavily on continuous
-automated testing and cannot merge new code without adequate test coverage.
-Please see [the 'Testing' section of doc/dev/dev.md](doc/dev/dev.md#testing)
-for more information.
-
-#### Thanks
-
-Thank you for your interest in contributing to the ongoing development
-of BIND.

COPYRIGHT

@@ -1,24 +1,21 @@
-Copyright (C) 1996-2018  Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 1996-2002  Internet Software Consortium.
 
-Permission to use, copy, modify, and/or distribute this software for any
+Permission to use, copy, modify, and distribute this software for any
 purpose with or without fee is hereby granted, provided that the above
 copyright notice and this permission notice appear in all copies.
 
-THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
+THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-	Portions of this code release fall under one or more of the
-	following Copyright notices.  Please see individual source
-	files for details.
+$Id: COPYRIGHT,v 1.6.2.2 2002/02/12 06:05:48 marka Exp $
 
-	For binary releases also see: OpenSSL-LICENSE.
-
-Copyright (C) 1996-2001  Nominum, Inc.
+Portions Copyright (C) 1996-2001  Nominum, Inc.
 
 Permission to use, copy, modify, and distribute this software for any
 purpose with or without fee is hereby granted, provided that the above
@@ -31,507 +28,3 @@ ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
 OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 1995-2000 by Network Associates, Inc.
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND ISC AND NETWORK ASSOCIATES DISCLAIMS
-ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE
-FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
-IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 2002 Stichting NLnet, Netherlands, stichting@nlnet.nl.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the
-above copyright notice and this permission notice appear in all
-copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND STICHTING NLNET
-DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-STICHTING NLNET BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-USE OR PERFORMANCE OF THIS SOFTWARE.
-
-The development of Dynamically Loadable Zones (DLZ) for Bind 9 was
-conceived and contributed by Rob Butler.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the
-above copyright notice and this permission notice appear in all
-copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND ROB BUTLER
-DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-ROB BUTLER BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1987, 1990, 1993, 1994
-     The Regents of the University of California.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the University nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) The Internet Society 2005.  This version of
-this module is part of RFC 4178; see the RFC itself for
-full legal notices.
-
-(The above copyright notice is per RFC 3978 5.6 (a), q.v.)
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 2004 Masarykova universita
-(Masaryk University, Brno, Czech Republic)
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-3. Neither the name of the University nor the names of its contributors may
-   be used to endorse or promote products derived from this software
-   without specific prior written permission.
- 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1997 - 2003 Kungliga Tekniska Högskolan
-(Royal Institute of Technology, Stockholm, Sweden). 
-All rights reserved. 
-
-Redistribution and use in source and binary forms, with or without 
-modification, are permitted provided that the following conditions 
-are met: 
-
-1. Redistributions of source code must retain the above copyright 
-   notice, this list of conditions and the following disclaimer. 
-
-2. Redistributions in binary form must reproduce the above copyright 
-   notice, this list of conditions and the following disclaimer in the 
-   documentation and/or other materials provided with the distribution. 
-
-3. Neither the name of the Institute nor the names of its contributors 
-   may be used to endorse or promote products derived from this software 
-   without specific prior written permission. 
-
-THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
-ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
-SUCH DAMAGE. 
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1998 Doug Rabson
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright ((c)) 2002, Rice University
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-    * Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-
-    * Redistributions in binary form must reproduce the above
-    copyright notice, this list of conditions and the following
-    disclaimer in the documentation and/or other materials provided
-    with the distribution.
-
-    * Neither the name of Rice University (RICE) nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-
-
-This software is provided by RICE and the contributors on an "as is"
-basis, without any representations or warranties of any kind, express
-or implied including, but not limited to, representations or
-warranties of non-infringement, merchantability or fitness for a
-particular purpose. In no event shall RICE or contributors be liable
-for any direct, indirect, incidental, special, exemplary, or
-consequential damages (including, but not limited to, procurement of
-substitute goods or services; loss of use, data, or profits; or
-business interruption) however caused and on any theory of liability,
-whether in contract, strict liability, or tort (including negligence
-or otherwise) arising in any way out of the use of this software, even
-if advised of the possibility of such damage.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1993 by Digital Equipment Corporation.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies, and that
-the name of Digital Equipment Corporation not be used in advertising or
-publicity pertaining to distribution of the document or software without
-specific, written prior permission.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
-WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
-CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
-DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
-ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright 2000 Aaron D. Gifford.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the copyright holder nor the names of contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
- 
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) AND CONTRIBUTOR(S) ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR(S) OR CONTRIBUTOR(S) BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1998 Doug Rabson.
-Copyright (c) 2001 Jake Burkholder.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the project nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1999-2000 by Nortel Networks Corporation
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND NORTEL NETWORKS DISCLAIMS
-ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NORTEL NETWORKS
-BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 2000-2002 Japan Network Information Center.  All rights reserved.
- 
-By using this file, you agree to the terms and conditions set forth bellow.
-
-                        LICENSE TERMS AND CONDITIONS 
-
-The following License Terms and Conditions apply, unless a different
-license is obtained from Japan Network Information Center ("JPNIC"),
-a Japanese association, Kokusai-Kougyou-Kanda Bldg 6F, 2-3-4 Uchi-Kanda,
-Chiyoda-ku, Tokyo 101-0047, Japan.
-
-1. Use, Modification and Redistribution (including distribution of any
-   modified or derived work) in source and/or binary forms is permitted
-   under this License Terms and Conditions.
-
-2. Redistribution of source code must retain the copyright notices as they
-   appear in each source code file, this License Terms and Conditions.
-
-3. Redistribution in binary form must reproduce the Copyright Notice,
-   this License Terms and Conditions, in the documentation and/or other
-   materials provided with the distribution.  For the purposes of binary
-   distribution the "Copyright Notice" refers to the following language:
-   "Copyright (c) 2000-2002 Japan Network Information Center.  All rights
-   reserved."
-
-4. The name of JPNIC may not be used to endorse or promote products
-   derived from this Software without specific prior written approval of
-   JPNIC.
-
-5. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY JPNIC
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL JPNIC BE LIABLE
-   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-   BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-   ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 2004  Nominet, Ltd.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND NOMINET DISCLAIMS ALL WARRANTIES WITH
-REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Portions Copyright RSA Security Inc.
-
-License to copy and use this software is granted provided that it is
-identified as "RSA Security Inc. PKCS #11 Cryptographic Token Interface
-(Cryptoki)" in all material mentioning or referencing this software.
-
-License is also granted to make and use derivative works provided that
-such works are identified as "derived from the RSA Security Inc. PKCS #11
-Cryptographic Token Interface (Cryptoki)" in all material mentioning or
-referencing the derived work.
-
-RSA Security Inc. makes no representations concerning either the
-merchantability of this software or the suitability of this software for
-any particular purpose. It is provided "as is" without express or implied
-warranty of any kind.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1996, David Mazieres <dm@uun.org>
-Copyright (c) 2008, Damien Miller <djm@openbsd.org>
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
------------------------------------------------------------------------------
-
-Copyright (c) 2000-2001 The OpenSSL Project.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in
-   the documentation and/or other materials provided with the
-   distribution.
-
-3. All advertising materials mentioning features or use of this
-   software must display the following acknowledgment:
-   "This product includes software developed by the OpenSSL Project
-   for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
-
-4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
-   endorse or promote products derived from this software without
-   prior written permission. For written permission, please contact
-   licensing@OpenSSL.org.
-
-5. Products derived from this software may not be called "OpenSSL"
-   nor may "OpenSSL" appear in their names without prior written
-   permission of the OpenSSL Project.
-
-6. Redistributions of any form whatsoever must retain the following
-   acknowledgment:
-   "This product includes software developed by the OpenSSL Project
-   for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
-
-THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
-EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
-ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-OF THE POSSIBILITY OF SUCH DAMAGE.
-
------------------------------------------------------------------------------
-
-Copyright (c) 1995, 1997, 1998 The NetBSD Foundation, Inc.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-

EXCLUDED

@@ -1,111 +1,162 @@
-3624.	[bug]		Look for 'json_object_new_int64' when looking for a
-			the json library. [RT #34449]
 
-3622.	[tuning]	Eliminate an unnecessary lock when incrementing
-			cache statistics. [RT #34339]
+1007.	[port]		config.guess, config.sub from autoconf-2.52.
 
-3619.	[bug]		Fixed a bug in RPZ with "recursive-only no;"
-			[RT #33776]
+1008.	[port]		libtool.m4, ltmain.sh from libtool-1.4.2.
 
-3612.	[port]		Check whether to use -ljson or -ljson-c. [RT #34115]
+1009.	[port]		OpenUNIX 8 support. [RT #1728]
 
-3609.	[bug]		Corrected a possible deadlock in applications using
-			the export version of the isc_app API. [RT #33967]
+1011.	[cleanup]	Removed isc_dir_current().
 
-3604.	[bug]		Fixed a compile-time error when building with
-			JSON but not XML. [RT #33959]
+1024.	[port]		Compilation failed on HP-UX 11.11 due to
+			incompatible use of the SIOCGLIFCONF macro
+			name. [RT #1831]
+			[needs more work]
 
-3602.	[contrib]	Added DLZ Perl module, allowing Perl scripts to
-			integrate with named and serve DNS data.
-			(Contributed by John Eaglesham of Yahoo.)
+1025.	[bug]		Don't use multicast addresses to resolve iterative
+			queries. [RT #101]
 
-3598.	[cleanup]	Improved portability of map file code. [RT #33820]
+1034.	[bug]		Ignore the RD bit on multicast queries as specified
+			in RFC 1123. [RT #137]
 
-3597.	[bug]		Ensure automatic-resigning heaps are reconstructed
-			when loading zones in map format. [RT #33381]
+1035.	[bug]		If we respond to multicast queries (which we
+			currently do not), respond from a unicast address
+			as specified in RFC 1123. [RT #137]
 
-3595.	[port]		win32: Fix build problems introduced by change #3550.
-			[RT #33807]
+1037.	[bug]		Negative responses whose authority section contain
+			SOA or NS records whose owner names are not equal
+			equal to or parents of the query name should be
+			rejected. [RT #1862]
 
-3570.	[bug]		Check internal pointers are valid when loading map
-			files. [RT #33403]
+1073.	[bug]		The ADB cache cleaning should also be space driven.
+			[RT #1915, #1938]
+			[ New function dns_adb_setadbsize() ]
 
-3569.	[contrib]	Ported mysql DLZ driver to dynamically-loadable
-			module, and added multithread support. [RT #33394]
+1079.	[bug]		BIND 8 compatibility: accept bare elements at top
+			level of sort list treating them as if they were
+			a single element list. [RT #1963]
 
-3564.	[bug]		Improved handling of corrupted map files. [RT #33380]
+1080.	[bug]		BIND 8 compatibility: accept bare IP prefixes
+			as the second element of a two-element top level
+			sort list statement. [RT #1964]
 
-3554.	[bug]		RRL failed to correctly rate-limit upward
-			referrals and failed to count dropped error
-			responses in the statistics. [RT #33225]
+1105.	[port]		OpenUNIX 8 enable threads by default. [RT #1970]
+			[Functional change]
 
-3551.	[bug]		resolver.querydscp[46] were uninitialized.  [RT #32686]
+1110.	[bug]		dig should only accept valid abbreviations of +options.
+			[RT #2003]
+			[Potentially breaks scripts.  Leave to 9.3.0.]
 
-3545.	[bug]		RRL slip behavior was incorrect when set to 1.
-			[RT #33111]
+1143.	[bug]		When a trusted-keys statement was present and named
+			was built without crypto support, it would leak memory.
+			[ Not applicable to 9.2 ]
 
-3523.	[contrib]	Ported filesystem and ldap DLZ drivers to
-			dynamically-loadable modules, and added the
-			"wildcard" module based on a contribution from
-			Vadim Goncharov <vgoncharov@nic.ru>. [RT #23569]
+1150.	[bug]		named incorrectly accepted TTL values
+			containing plus or minus signs, such as
+			1d+1h-1s.
+			[ Uses new function isc_parse_uint32() ]
 
-3522.	[bug]		DLZ lookups could fail to return SERVFAIL when
-			they ought to. [RT #32685]
+1151.	[bug]		nslookup failed to check that the arguments to
+			the port, timeout, and retry options were
+			valid integers and in range. [RT #2099]
+			[ Uses new function isc_parse_uint32() ]
 
-3518.	[bug]		Increase the size of dns_rrl_key.s.rtype by one bit
-			so that all dns_rrl_rtype_t enum values fit regardless
-			of whether it is teated as signed or unsigned by
-			the compiler. [RT #32792]
+1159.	[bug]		MD and MF are not permitted to be loaded by RFC1123
+			[ Could cause zones that loaded in 9.2.0 to fail
+			to load.  Leave such breakages to 9.3.0. ]
 
-3507.	[bug]		Statistics channel XSL had a glitch when attempting
-			to chart query data before any queries had been
-			received. [RT #32620]
+1187.	[bug]		named was incorrectly returning DNSSEC records
+			in negative responses when the DO bit was not set.
+			[ Requires API change (new argument) to
+			dns_rdataset_towire(), dns_rdataset_towirepartial()
+			and dns_rdataset_towirepartial() ]
 
-3494.	[func]		DNS RRL: Blunt the impact of DNS reflection and
-			amplification attacks by rate-limiting substantially-
-			identical responses. To enable, use "configure
-			--enable-rrl". [RT #28130]
+1192.	[bug]		The seconds fields in LOC records were restricted
+			to three decimal places.  More decimal places should
+			be allowed but warned about.
 
-3490.	[bug]		When logging RDATA during update, truncate if it's
-			too long. [RT #32365]
+1209.	[bug]		Dig, host, nslookup were not checking the message ids
+			on the responses. [RT #2454]
 
-3489.	[bug]		--enable-developer now turns on ISC_LIST_CHECKINIT.
-			When cloning a rdataset do not copy the link contents.
-			[RT #32651]
+1224.	[bug]		'rrset-order' and 'sortlist' should be additive
+			not exclusive.
+			[tightly coupled with 'cyclic' and 'random' support]
 
-3484.	[bug]		Some statistics were incorrectly rendered in XML.
-			[RT #32587]
+1233.	[bug]		The flags field of a KEY record can be expressed in
+			hex as well as decimal.
+			[ Not applicable to 9.2.x ]
 
-3476.	[bug]		"rndc zonestatus" could report a spurious "not
-			found" error on inline-signing zones. [RT #29226]
+1234.	[bug]		contrib/sdb: 'zonetodb' failed to call
+			dns_result_register().  DNS_R_SEENINCLUDE should not
+			be fatal.
 
-3475.	[cleanup]	Changed name of 'map' zone file format (previously
-			'fast'). [RT #32458]
+1243.	[bug]		It was possible to trigger a REQUIRE() in
+			dns_message_findtype(). [RT #2659]
 
-3472.	[bug]		The active-connections counter in the socket
-			statistics could underflow. [RT #31747]
+1247.	[bug]		Don't reset the interface index for link/site local
+			addresses. [RT #2576]
+			[depends on new functions]
 
-3469.	[bug]		Handle DLZ lookup failures more gracefully. Improve
-			backward compatibility between versions of DLZ dlopen
-			API. [RT #32275]
+1255.	[bug]		When verifying that an NXT proves nonexistence, check
+			the rcode of the message and only do the matching NXT
+			check.  That is, for NXDOMAIN responses, check that
+			the name is in the range between the NXT owner and
+			next name, and for NOERROR NODATA responses, check
+			that the type is not present in the NXT bitmap.
+			[required changes from DS support]
 
-3434.	[bug]		Pass client info to the DLZ findzone() entry
-			point in addition to lookup().  This makes it
-			possible for a database to answer differently
-			whether it's authoritative for a name depending
-			on the address of the client.  [RT #31775]
+1271.	[bug]		"recursion available: {denied,approved}" was too
+			confusing.
 
-3433.	[bug]		dlz_findzone() did not correctly handle
-			ISC_R_NOMORE. [RT #31172]
+1321.	[bug]		If the last RRset in a zone is glue, dnssec-signzone
+			would incorrectly duplicate its output and sign it.
+			[DS specific]
 
-3375.	[bug]		'rndc dumpdb' failed on empty caches. [RT #30808]
+1322.	[bug]		dnssec-signzone usage message was misleading.
+			[DS specific]
 
-3324.	[test]		Add better tests for ADB stats [RT #27057]
+1328.	[bug]		The validator could incorrectly verify an invalid
+			negative proof.
+			[DS specific]
 
-3316.	[tuning]	Improved locking performance when recursing.
-			[RT #28836]
+1355.	[bug]		Fix DNSSEC wildcard proof for CNAME/DNAME.
+
+1362.	[bug]		remove IFF_RUNNING test when scanning interfaces.
+
+1371.	[bug]		notify-source-v6, transfer-source-v6 and
+			query-source-v6 with explicit addresses and using the
+			same ports as named was listening on could interfere
+			with nameds ability to answer queries sent to those
+			addresses.
+
+1386.	[bug]		named-checkzone -z stopped on errors in a zone.
+			[RT #3653]
+
+1392.	[bug]		named-checkzone: update usage.
+
+1393.	[port]		Bind to individual IPv6 interfaces if IPV6_IPV6ONLY
+			is not available in the kernel to prevent accidently
+			listening on IPv4 interfaces.
+
+1398.	[doc]		ARM: notify-also should have been also-notify.
+			[RT #4345]
+
+1400.	[bug]		Block the addition of wildcard NS records by IXFR
+			or UPDATE. [RT #3502]
+
+1404.	[bug]		libbind: ns_name_ntol() could overwrite a zero length
+			buffer.
+
+1409.	[bug]		DS should have attribute DNS_RDATATYPEATTR_DNSSEC.
+
+1430.	[port]		linux: IPv6 interface scanning support.
+
+1433.	[bug]		named could trigger a REQUIRE failure if it could
+			not get a file descriptor when attempting to write
+			a master file. [RT #4347]
+
+1454.	[port]		Use getifaddrs() if available for interface scanning.
+			--disable-getifaddrs to override.  Glibc currently
+			has a getifaddrs() that does not support IPv6.
+			Use --enable-getifaddrs=glibc to force the use of
+			this version under linux machines.
 
-3315.	[tuning]	Use multiple dispatch objects for sending upstream
-			queries; this can improve performance on busy
-			multiprocessor systems by reducing lock contention.
-			[RT #28605]

FAQ

@@ -0,0 +1,332 @@
+
+
+
+Frequently Asked Questions about BIND 9
+
+
+Q: Why doesn't -u work on Linux 2.2.x when I build with --enable-threads?
+
+A: Linux threads do not fully implement the Posix threads (pthreads) standard.
+In particular, setuid() operates only on the current thread, not the full
+process.  Because of this limitation, BIND 9 cannot use setuid() on Linux as it
+can on all other supported platforms.  setuid() cannot be called before
+creating threads, since the server does not start listening on reserved ports
+until after threads have started.
+
+  In the 2.2.18 or 2.3.99-pre3 and newer kernels, the ability to preserve
+capabilities across a setuid() call is present.  This allows BIND 9 to call
+setuid() early, while retaining the ability to bind reserved ports.  This is
+a Linux-specific hack.
+
+  On a 2.2 kernel, BIND 9 does drop many root privileges, so it should be less
+of a security risk than a root process that has not dropped privileges.
+
+  If Linux threads ever work correctly, this restriction will go away.
+
+  Configuring BIND9 with the --disable-threads option (the default) causes a
+non-threaded version to be built, which will allow -u to be used.
+
+
+Q: Why does named log the warning message "no TTL specified - using SOA
+MINTTL instead"?
+
+A: Your zone file is illegal according to RFC1035.  It must either
+have a line like
+
+   $TTL 86400
+
+at the beginning, or the first record in it must have a TTL field,
+like the "84600" in this example:
+
+   example.com. 86400 IN SOA ns hostmaster ( 1 3600 1800 1814400 3600 )
+
+Q: Why do I see 5 (or more) copies of named on Linux?
+
+A: Linux threads each show up as a process under ps.  The approximate
+number of threads running is n+4, where n is the number of CPUs.  Note that
+the amount of memory used is not cumulative; if each process is using 10M of
+memory, only a total of 10M is used.
+
+
+Q: Why does BIND 9 log "permission denied" errors accessing its
+configuration files or zones on my Linux system even though it is running
+as root?
+
+A: On Linux, BIND 9 drops most of its root privileges on startup.
+This including the privilege to open files owned by other users.
+Therefore, if the server is running as root, the configuration files
+and zone files should also be owned by root.
+
+
+Q: Why do I get errors like "dns_zone_load: zone foo/IN: loading master file
+bar: ran out of space"
+
+A: This is often caused by TXT records with missing close quotes.  Check that
+all TXT records containing quoted strings have both open and close quotes.
+
+
+Q: How do I produce a usable core file from a multithreaded named on Linux?
+
+A: If the Linux kernel is 2.4.7 or newer, multithreaded core dumps
+are usable (that is, the correct thread is dumped).  Otherwise, if using
+a 2.2 kernel, apply the kernel patch found in contrib/linux/coredump-patch
+and rebuild the kernel.  This patch will cause multithreaded programs to dump
+the correct thread.
+
+
+Q: How do I restrict people from looking up the server version?
+
+A: Put a "version" option containing something other than the real
+version in the "options" section of named.conf.  Note doing this will
+not prevent attacks and may impede people trying to diagnose problems
+with your server.  Also it is possible to "fingerprint" nameservers to
+determine their version.
+
+
+Q: How do I restrict only remote users from looking up the server
+version?
+
+A: The following view statement will intercept lookups as the internal
+view that holds the version information will be matched last.  The
+caveats of the previous answer still apply, of course.
+
+  view "chaos" chaos {
+	  match-clients { <those to be refused>; };
+	  allow-query { none; };
+	  zone "." {
+		  type hint;
+		  file "/dev/null";  // or any empty file
+	  };
+  };
+
+
+Q: What do "no source of entropy found" or "could not open entropy source foo"
+mean?
+
+A: The server requires a source of entropy to perform certain operations,
+mostly DNSSEC related.  These messages indicate that you have no source
+of entropy.  On systems with /dev/random or an equivalent, it is used by
+default.  A source of entropy can also be defined using the random-device
+option in named.conf.
+
+
+Q: I installed BIND 9 and restarted named, but it's still BIND 8.  Why?
+
+A: BIND 9 is installed under /usr/local by default.  BIND 8 is often
+installed under /usr.  Check that the correct named is running.
+
+
+Q: I'm trying to use TSIG to authenticate dynamic updates or zone
+transfers.  I'm sure I have the keys set up correctly, but the server
+is rejecting the TSIG.  Why?
+
+A: This may be a clock skew problem.  Check that the the clocks on
+the client and server are properly synchronized (e.g., using ntp).
+
+
+Q: I'm trying to compile BIND 9, and "make" is failing due to files not
+being found.  Why?
+
+A: Using a parallel or distributed "make" to build BIND 9 is not
+supported, and doesn't work.  If you are using one of these, use
+normal make or gmake instead.
+
+
+Q: I have a BIND 9 master and a BIND 8.2.3 slave, and the master is
+logging error messages like "notify to 10.0.0.1#53 failed: unexpected
+end of input".  What's wrong?
+
+A: This error message is caused by a known bug in BIND 8.2.3 and is fixed
+in BIND 8.2.4.  It can be safely ignored - the notify has been acted on by
+the slave despite the error message.
+
+
+Q: I keep getting log messages like the following.  Why?
+
+   Dec  4 23:47:59 client 10.0.0.1#1355: updating zone 'example.com/IN':
+   update failed: 'RRset exists (value dependent)' prerequisite not
+   satisfied (NXRRSET)
+
+A: DNS updates allow the update request to test to see if certain
+conditions are met prior to proceeding with the update.  The message
+above is saying that conditions were not met and the update is not
+proceeding.  See doc/rfc/rfc2136.txt for more details on prerequisites.
+
+
+Q: I keep getting log messages like the following.  Why?
+
+   Jun 21 12:00:00.000 client 10.0.0.1#1234: update denied
+
+A: Someone is trying to update your DNS data using the RFC2136 Dynamic
+Update protocol.  Windows 2000 machines have a habit of sending dynamic
+update requests to DNS servers without being specifically configured to
+do so.  If the update requests are coming from a Windows 2000 machine,
+see <http://support.microsoft.com/support/kb/articles/q246/8/04.asp>
+for information about how to turn them off.
+
+
+Q: I see a log message like the following.  Why?
+
+   couldn't open pid file '/var/run/named.pid': Permission denied
+
+A: You are most likely running named as a non-root user, and that user
+does not have permission to write in /var/run.  The common ways of
+fixing this are to create a /var/run/named directory owned by the named
+user and set pid-file to "/var/run/named/named.pid", or set
+pid-file to "named.pid", which will put the file in the directory
+specified by the directory option (which, in this case, must be writable
+by the named user).
+
+
+Q: When I do a "dig . ns", many of the A records for the root
+servers are missing.  Why?
+
+A: This is normal and harmless.  It is a somewhat confusing side effect
+of the way BIND 9 does RFC2181 trust ranking and of the efforts BIND 9
+makes to avoid promoting glue into answers.
+
+When BIND 9 first starts up and primes its cache, it receives the root
+server addresses as additional data in an authoritative response from
+a root server, and these records are eligible for inclusion as
+additional data in responses.  Subsequently it receives a subset of
+the root server addresses as additional data in a non-authoritative
+(referral) response from a root server.  This causes the addresses to
+now be considered non-authoritative (glue) data, which is not eligible
+for inclusion in responses.
+
+The server does have a complete set of root server addresses cached
+at all times, it just may not include all of them as additional data,
+depending on whether they were last received as answers or as glue.
+You can always look up the addresses with explicit queries like
+"dig a.root-servers.net A".
+
+
+Q: Zone transfers from my BIND 9 master to my Windows 2000 slave
+fail.  Why?
+
+A: This may be caused by a bug in the Windows 2000 DNS server where
+DNS messages larger than 16K are not handled properly.  This can be
+worked around by setting the option "transfer-format one-answer;".
+Also check whether your zone contains domain names with embedded
+spaces or other special characters, like "John\032Doe\213s\032Computer",
+since such names have been known to cause Windows 2000 slaves to
+incorrectly reject the zone.
+
+
+Q: Why don't my zones reload when I do an "rndc reload" or SIGHUP?
+
+A: A zone can be updated either by editing zone files and reloading
+the server or by dynamic update, but not both.  If you have enabled
+dynamic update for a zone using the "allow-update" option, you are not
+supposed to edit the zone file by hand, and the server will not
+attempt to reload it.
+
+
+Q: I can query the nameserver from the nameserver but not from other
+machines.  Why?
+
+A: This is usually the result of the firewall configuration stopping
+the queries and / or the replies.
+
+
+Q: How can I make a server a slave for both an internal and
+an external view at the same time?  When I tried, both views
+on the slave were transferred from the same view on the master.
+
+A: You will need to give the master and slave multiple IP addresses and
+use those to make sure you reach the correct view on the other machine.
+
+	e.g.
+	Master: 10.0.1.1 (internal), 10.0.1.2 (external, IP alias)
+	    internal:
+		match-clients { !10.0.1.2; !10.0.1.4; 10.0.1/24; };
+		notify-source 10.0.1.1;
+		transfer-source 10.0.1.1;
+		query-source address 10.0.1.1;
+	    external:
+		match-clients { any; };
+		recursion no;	// don't offer recursion to the world
+		notify-source 10.0.1.2;
+		transfer-source 10.0.1.2;
+		query-source address 10.0.1.2;
+
+	Slave: 10.0.1.3 (internal), 10.0.1.4 (external, IP alias)
+	    internal:
+		match-clients { !10.0.1.2; !10.0.1.4; 10.0.1/24; };
+		notify-source 10.0.1.3;
+		transfer-source 10.0.1.3;
+		query-source address 10.0.1.3;
+	    external:
+		match-clients { any; };
+		recursion no;	// don't offer recursion to the world
+		notify-source 10.0.1.4;
+		transfer-source 10.0.1.4;
+		query-source address 10.0.1.4;
+
+	You put the external address on the alias so that all the other
+	dns clients on these boxes see the internal view by default.
+
+
+Q: When I try to use rndc, I get the error message "network
+unreachable" or "connection refused", even though I know named is
+running.
+
+A: You probably have "default-server localhost" in /etc/rndc.conf,
+your /etc/hosts or DNS maps "localhost" to both the IPv4 loopback
+address 127.0.0.1 and the IPv6 loopback address ::1, and you do not
+have IPv6 fully operational.  Change the "default-server localhost" to
+"default-server 127.0.0.1" to make sure rdnc does not try to contact
+the name server using IPv6.
+
+
+Q: I have Freebsd 4.4 and "rndc-confgen -a" just sits there.
+
+A: /dev/random is not configured.  Use rndcontrol(8) to tell the kernel
+to use certain interrupts as a source of random events.  You can make this
+permanent by setting rand_irqs in /etc/rc.conf.
+
+e.g.
+	/etc/rc.conf
+	rand_irqs="3 14 15"
+
+
+Q: Why is named listening on UDP port other than 53?
+
+A: Named uses a system selected port to make queries of other nameservers.
+This behaviour can be overridden by using query-source to lock down the
+port and/or address.
+
+
+Q: I get error messages like "multiple RRs of singleton type" and
+"CNAME and other data" when transferring a zone.  What does this mean?
+
+A: These indicate a malformed master zone.  You can identify the
+exact records involved by transferring the zone using dig then
+running named-checkzone on it.
+
+	e.g.
+		dig axfr example.com @master-server > tmp
+		named-checkzone example.com tmp
+
+
+Q: I get error messages like "named.conf:99: unexpected end of input" where
+99 is the last line of named.conf.
+
+A: Some text editors (notepad and wordpad) fail to put a line termination
+indication (e.g. CR/LF) on the last line of a text file.  This can be fixed
+by "adding" a blank line to the end of the file.  Named expects to see EOF
+immediately after EOL and treats text files where this is not met as truncated.
+
+
+Q: I get warning messages like "zone example.com/IN: refresh: failure trying master
+1.2.3.4#53: timed out".
+
+A: Check that you can make UDP queries from the slave to the master
+
+	dig +norec example.com soa @1.2.3.4
+
+A: You could be generating queries faster than the slave can cope with.  Lower
+the serial query rate.
+
+	serial-query-rate 5; // default 20
+

HISTORY

@@ -1,233 +0,0 @@
-Functional enhancements from prior major releases of BIND 9
-
-BIND 9.8.0
-
-BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
-releases. New features include:
-
-  * Built-in trust anchor for the root zone, which can be switched on via
-    "dnssec-validation auto;"
-  * Support for DNS64.
-  * Support for response policy zones (RPZ).
-  * Support for writable DLZ zones.
-  * Improved ease of configuration of GSS/TSIG for interoperability with
-    Active Directory
-  * Support for GOST signing algorithm for DNSSEC.
-  * Removed RTT Banding from server selection algorithm.
-  * New "static-stub" zone type.
-  * Allow configuration of resolver timeouts via "resolver-query-timeout"
-    option.
-  * The DLZ "dlopen" driver is now built by default.
-  * Added a new include file with function typedefs for the DLZ "dlopen"
-    driver.
-  * Made "--with-gssapi" default.
-  * More verbose error reporting from DLZ LDAP.
-
-BIND 9.7.0
-
-BIND 9.7.0 includes a number of changes from BIND 9.6 and earlier
-releases. Most are intended to simplify DNSSEC configuration. New features
-include:
-
-  * Fully automatic signing of zones by "named".
-  * Simplified configuration of DNSSEC Lookaside Validation (DLV).
-  * Simplified configuration of Dynamic DNS, using the "ddns-confgen"
-    command line tool or the "local" update-policy option. (As a side
-    effect, this also makes it easier to configure automatic zone
-    re-signing.)
-  * New named option "attach-cache" that allows multiple views to share a
-    single cache.
-  * DNS rebinding attack prevention.
-  * New default values for dnssec-keygen parameters.
-  * Support for RFC 5011 automated trust anchor maintenance
-  * Smart signing: simplified tools for zone signing and key maintenance.
-  * The "statistics-channels" option is now available on Windows.
-  * A new DNSSEC-aware libdns API for use by non-BIND9 applications
-  * On some platforms, named and other binaries can now print out a stack
-    backtrace on assertion failure, to aid in debugging.
-  * A "tools only" installation mode on Windows, which only installs dig,
-    host, nslookup and nsupdate.
-  * Improved PKCS#11 support, including Keyper support and explicit
-    OpenSSL engine selection.
-
-BIND 9.6.0
-
-  * Full NSEC3 support
-  * Automatic zone re-signing
-  * New update-policy methods tcp-self and 6to4-self
-  * The BIND 8 resolver library, libbind, has been removed from the BIND 9
-    distribution and is now available as a separate download.
-  * Change the default pid file location from /var/run to /var/run/
-    {named,lwresd} for improved chroot/setuid support.
-
-BIND 9.5.0
-
-  * GSS-TSIG support (RFC 3645).
-  * DHCID support.
-  * Experimental http server and statistics support for named via xml.
-  * More detailed statistics counters including those supported in BIND 8.
-  * Faster ACL processing.
-  * Use Doxygen to generate internal documentation.
-  * Efficient LRU cache-cleaning mechanism.
-  * NSID support.
-
-BIND 9.4.0
-
-  * Implemented "additional section caching (or acache)", an internal
-    cache framework for additional section content to improve response
-    performance. Several configuration options were provided to control
-    the behavior.
-  * New notify type 'master-only'. Enable notify for master zones only.
-  * Accept 'notify-source' style syntax for query-source.
-  * rndc now allows addresses to be set in the server clauses.
-  * New option "allow-query-cache". This lets "allow-query" be used to
-    specify the default zone access level rather than having to have every
-    zone override the global value. "allow-query-cache" can be set at both
-    the options and view levels. If "allow-query-cache" is not set then
-    "allow-recursion" is used if set, otherwise "allow-query" is used if
-    set unless "recursion no;" is set in which case "none;" is used,
-    otherwise the default (localhost; localnets;) is used.
-  * rndc: the source address can now be specified.
-  * ixfr-from-differences now takes master and slave in addition to yes
-    and no at the options and view levels.
-  * Allow the journal's name to be changed via named.conf.
-  * 'rndc notify zone [class [view]]' resend the NOTIFY messages for the
-    specified zone.
-  * 'dig +trace' now randomly selects the next servers to try. Report if
-    there is a bad delegation.
-  * Improve check-names error messages.
-  * Make public the function to read a key file, dst_key_read_public().
-  * dig now returns the byte count for axfr/ixfr.
-  * allow-update is now settable at the options / view level.
-  * named-checkconf now checks the logging configuration.
-  * host now can turn on memory debugging flags with '-m'.
-  * Don't send notify messages to self.
-  * Perform sanity checks on NS records which refer to 'in zone' names.
-  * New zone option "notify-delay". Specify a minimum delay between sets
-    of NOTIFY messages.
-  * Extend adjusting TTL warning messages.
-  * Named and named-checkzone can now both check for non-terminal wildcard
-    records.
-  * "rndc freeze/thaw" now freezes/thaws all zones.
-  * named-checkconf now check acls to verify that they only refer to
-    existing acls.
-  * The server syntax has been extended to support a range of servers.
-  * Report differences between hints and real NS rrset and associated
-    address records.
-  * Preserve the case of domain names in rdata during zone transfers.
-  * Restructured the data locking framework using architecture dependent
-    atomic operations (when available), improving response performance on
-    multi-processor machines significantly. x86, x86_64, alpha, powerpc,
-    and mips are currently supported.
-  * UNIX domain controls are now supported.
-  * Add support for additional zone file formats for improving loading
-    performance. The masterfile-format option in named.conf can be used to
-    specify a non-default format. A separate command named-compilezone was
-    provided to generate zone files in the new format. Additionally, the
-    -I and -O options for dnssec-signzone specify the input and output
-    formats.
-  * dnssec-signzone can now randomize signature end times (dnssec-signzone
-    -j jitter).
-  * Add support for CH A record.
-  * Add additional zone data constancy checks. named-checkzone has
-    extended checking of NS, MX and SRV record and the hosts they
-    reference. named has extended post zone load checks. New zone options:
-    check-mx and integrity-check.
-  * edns-udp-size can now be overridden on a per server basis.
-  * dig can now specify the EDNS version when making a query.
-  * Added framework for handling multiple EDNS versions.
-  * Additional memory debugging support to track size and mctx arguments.
-  * Detect duplicates of UDP queries we are recursing on and drop them.
-    New stats category "duplicates".
-  * "USE INTERNAL MALLOC" is now runtime selectable.
-  * The lame cache is now done on a basis as some servers only appear to
-    be lame for certain query types.
-  * Limit the number of recursive clients that can be waiting for a single
-    query () to resolve. New options clients-per-query and
-    max-clients-per-query.
-  * dig: report the number of extra bytes still left in the packet after
-    processing all the records.
-  * Support for IPSECKEY rdata type.
-  * Raise the UDP recieve buffer size to 32k if it is less than 32k.
-  * x86 and x86_64 now have seperate atomic locking implementations.
-  * named-checkconf now validates update-policy entries.
-  * Attempt to make the amount of work performed in a iteration self
-    tuning. The covers nodes clean from the cache per iteration, nodes
-    written to disk when rewriting a master file and nodes destroyed per
-    iteration when destroying a zone or a cache.
-  * ISC string copy API.
-  * Automatic empty zone creation for D.F.IP6.ARPA and friends. Note: RFC
-    1918 zones are not yet covered by this but are likely to be in a
-    future release.
-  * New options: empty-server, empty-contact, empty-zones-enable and
-    disable-empty-zone.
-  * dig now has a '-q queryname' and '+showsearch' options.
-  * host/nslookup now continue (default)/fail on SERVFAIL.
-  * dig now warns if 'RA' is not set in the answer when 'RD' was set in
-    the query. host/nslookup skip servers that fail to set 'RA' when 'RD'
-    is set unless a server is explicitly set.
-  * Integrate contibuted DLZ code into named.
-  * Integrate contibuted IDN code from JPNIC.
-  * libbind: corresponds to that from BIND 8.4.7.
-
-BIND 9.3.0
-
-  * DNSSEC is now DS based (RFC 3658).
-  * DNSSEC lookaside validation.
-  * check-names is now implemented.
-  * rrset-order is more complete.
-  * IPv4/IPv6 transition support, dual-stack-servers.
-  * IXFR deltas can now be generated when loading master files,
-    ixfr-from-differences.
-  * It is now possible to specify the size of a journal, max-journal-size.
-  * It is now possible to define a named set of master servers to be used
-    in masters clause, masters.
-  * The advertised EDNS UDP size can now be set, edns-udp-size.
-  * allow-v6-synthesis has been obsoleted.
-  * Zones containing MD and MF will now be rejected.
-  * dig, nslookup name. now report "Not Implemented" as NOTIMP rather than
-    NOTIMPL. This will have impact on scripts that are looking for
-    NOTIMPL.
-  * libbind: corresponds to that from BIND 8.4.5.
-
-BIND 9.2.0
-
-  * The size of the cache can now be limited using the "max-cache-size"
-    option.
-  * The server can now automatically convert RFC1886-style recursive
-    lookup requests into RFC2874-style lookups, when enabled using the new
-    option "allow-v6-synthesis". This allows stub resolvers that support
-    AAAA records but not A6 record chains or binary labels to perform
-    lookups in domains that make use of these IPv6 DNS features.
-  * Performance has been improved.
-  * The man pages now use the more portable "man" macros rather than the
-    "mandoc" macros, and are installed by "make install".
-  * The named.conf parser has been completely rewritten. It now supports
-    "include" directives in more places such as inside "view" statements,
-    and it no longer has any reserved words.
-  * The "rndc status" command is now implemented.
-  * rndc can now be configured automatically.
-  * A BIND 8 compatible stub resolver library is now included in lib/bind.
-  * OpenSSL has been removed from the distribution. This means that to use
-    DNSSEC, OpenSSL must be installed and the --with-openssl option must
-    be supplied to configure. This does not apply to the use of TSIG,
-    which does not require OpenSSL.
-  * The source distribution now builds on Windows. See win32utils/
-    readme1.txt and win32utils/win32-build.txt for details.
-  * This distribution also includes a new lightweight stub resolver
-    library and associated resolver daemon that fully support forward and
-    reverse lookups of both IPv4 and IPv6 addresses. This library is
-    considered experimental and is not a complete replacement for the BIND
-    8 resolver library. Applications that use the BIND 8 res_* functions
-    to perform DNS lookups or dynamic updates still need to be linked
-    against the BIND 8 libraries. For DNS lookups, they can also use the
-    new "getrrsetbyname()" API.
-  * BIND 9.2 is capable of acting as an authoritative server for DNSSEC
-    secured zones. This functionality is believed to be stable and
-    complete except for lacking support for verifications involving
-    wildcard records in secure zones.
-  * When acting as a caching server, BIND 9.2 can be configured to perform
-    DNSSEC secure resolution on behalf of its clients. This part of the
-    DNSSEC implementation is still considered experimental. For detailed
-    information about the state of the DNSSEC implementation, see the file
-    doc/misc/dnssec.

HISTORY.md

@@ -1,246 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-### Functional enhancements from prior major releases of BIND 9
-
-#### BIND 9.8.0
-
-BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
-releases.  New features include:
-
-- Built-in trust anchor for the root zone, which can be
-  switched on via "dnssec-validation auto;"
-- Support for DNS64.
-- Support for response policy zones (RPZ).
-- Support for writable DLZ zones.
-- Improved ease of configuration of GSS/TSIG for
-  interoperability with Active Directory
-- Support for GOST signing algorithm for DNSSEC.
-- Removed RTT Banding from server selection algorithm.
-- New "static-stub" zone type.
-- Allow configuration of resolver timeouts via
-  "resolver-query-timeout" option.
-- The DLZ "dlopen" driver is now built by default.
-- Added a new include file with function typedefs
-  for the DLZ "dlopen" driver.
-- Made "--with-gssapi" default.
-- More verbose error reporting from DLZ LDAP.
-
-#### BIND 9.7.0
-
-BIND 9.7.0 includes a number of changes from BIND 9.6 and earlier
-releases.  Most are intended to simplify DNSSEC configuration.
-New features include:
-
-- Fully automatic signing of zones by "named".
-- Simplified configuration of DNSSEC Lookaside Validation (DLV).
-- Simplified configuration of Dynamic DNS, using the "ddns-confgen"
-  command line tool or the "local" update-policy option.  (As a side
-  effect, this also makes it easier to configure automatic zone
-  re-signing.)
-- New named option "attach-cache" that allows multiple views to
-  share a single cache.
-- DNS rebinding attack prevention.
-- New default values for dnssec-keygen parameters.
-- Support for RFC 5011 automated trust anchor maintenance
-- Smart signing: simplified tools for zone signing and key
-  maintenance.
-- The "statistics-channels" option is now available on Windows.
-- A new DNSSEC-aware libdns API for use by non-BIND9 applications
-- On some platforms, named and other binaries can now print out
-  a stack backtrace on assertion failure, to aid in debugging.
-- A "tools only" installation mode on Windows, which only installs
-  dig, host, nslookup and nsupdate.
-- Improved PKCS#11 support, including Keyper support and explicit
-  OpenSSL engine selection.
-
-#### BIND 9.6.0
-
-- Full NSEC3 support
-- Automatic zone re-signing
-- New update-policy methods tcp-self and 6to4-self
-- The BIND 8 resolver library, libbind, has been removed from the BIND 9
-  distribution and is now available as a separate download.
-- Change the default pid file location from /var/run to
-  /var/run/{named,lwresd} for improved chroot/setuid support.
-
-#### BIND 9.5.0
-
-- GSS-TSIG support (RFC 3645).
-- DHCID support.
-- Experimental http server and statistics support for named via xml.
-- More detailed statistics counters including those supported in BIND 8.
-- Faster ACL processing.
-- Use Doxygen to generate internal documentation.
-- Efficient LRU cache-cleaning mechanism.
-- NSID support.
-
-BIND 9.4.0
-
-- Implemented "additional section caching (or acache)", an internal cache
-  framework for additional section content to improve response performance.
-  Several configuration options were provided to control the behavior.
-- New notify type 'master-only'.  Enable notify for master zones only.
-- Accept 'notify-source' style syntax for query-source.
-- rndc now allows addresses to be set in the server clauses.
-- New option "allow-query-cache".  This lets "allow-query" be used to
-  specify the default zone access level rather than having to have every
-  zone override the global value.  "allow-query-cache" can be set at both
-  the options and view levels.  If "allow-query-cache" is not set then
-  "allow-recursion" is used if set, otherwise "allow-query" is used if set
-  unless "recursion no;" is set in which case "none;" is used, otherwise
-  the default (localhost; localnets;) is used.
-- rndc: the source address can now be specified.
-- ixfr-from-differences now takes master and slave in addition to yes and
-  no at the options and view levels.
-- Allow the journal's name to be changed via named.conf.
-- 'rndc notify zone [class [view]]' resend the NOTIFY messages for the
-  specified zone.
-- 'dig +trace' now randomly selects the next servers to try.  Report if
-  there is a bad delegation.
-- Improve check-names error messages.
-- Make public the function to read a key file, dst_key_read_public().
-- dig now returns the byte count for axfr/ixfr.
-- allow-update is now settable at the options / view level.
-- named-checkconf now checks the logging configuration.
-- host now can turn on memory debugging flags with '-m'.
-- Don't send notify messages to self.
-- Perform sanity checks on NS records which refer to 'in zone' names.
-- New zone option "notify-delay".  Specify a minimum delay between sets of
-  NOTIFY messages.
-- Extend adjusting TTL warning messages.
-- Named and named-checkzone can now both check for non-terminal wildcard
-  records.
-- "rndc freeze/thaw" now freezes/thaws all zones.
-- named-checkconf now check acls to verify that they only refer to existing
-  acls.
-- The server syntax has been extended to support a range of servers.
-- Report differences between hints and real NS rrset and associated address
-  records.
-- Preserve the case of domain names in rdata during zone transfers.
-- Restructured the data locking framework using architecture dependent
-  atomic operations (when available), improving response performance on
-  multi-processor machines significantly.  x86, x86_64, alpha, powerpc, and
-  mips are currently supported.
-- UNIX domain controls are now supported.
-- Add support for additional zone file formats for improving loading
-  performance.  The masterfile-format option in named.conf can be used to
-  specify a non-default format.  A separate command named-compilezone was
-  provided to generate zone files in the new format.  Additionally, the -I
-  and -O options for dnssec-signzone specify the input and output formats.
-- dnssec-signzone can now randomize signature end times (dnssec-signzone -j
-  jitter).
-- Add support for CH A record.
-- Add additional zone data constancy checks.  named-checkzone has extended
-  checking of NS, MX and SRV record and the hosts they reference.  named
-  has extended post zone load checks.  New zone options: check-mx and
-  integrity-check.
-- edns-udp-size can now be overridden on a per server basis.
-- dig can now specify the EDNS version when making a query.
-- Added framework for handling multiple EDNS versions.
-- Additional memory debugging support to track size and mctx arguments.
-- Detect duplicates of UDP queries we are recursing on and drop them.  New
-  stats category "duplicates".
-- "USE INTERNAL MALLOC" is now runtime selectable.
-- The lame cache is now done on a <qname,qclass,qtype> basis as some
-  servers only appear to be lame for certain query types.
-- Limit the number of recursive clients that can be waiting for a single
-  query (<qname,qtype,qclass>) to resolve.  New options clients-per-query
-  and max-clients-per-query.
-- dig: report the number of extra bytes still left in the packet after
-  processing all the records.
-- Support for IPSECKEY rdata type.
-- Raise the UDP recieve buffer size to 32k if it is less than 32k.
-- x86 and x86_64 now have seperate atomic locking implementations.
-- named-checkconf now validates update-policy entries.
-- Attempt to make the amount of work performed in a iteration self tuning.
-  The covers nodes clean from the cache per iteration, nodes written to
-  disk when rewriting a master file and nodes destroyed per iteration when
-  destroying a zone or a cache.
-- ISC string copy API.
-- Automatic empty zone creation for D.F.IP6.ARPA and friends.  Note: RFC
-  1918 zones are not yet covered by this but are likely to be in a future
-  release.
-- New options: empty-server, empty-contact, empty-zones-enable and
-  disable-empty-zone.
-- dig now has a '-q queryname' and '+showsearch' options.
-- host/nslookup now continue (default)/fail on SERVFAIL.
-- dig now warns if 'RA' is not set in the answer when 'RD' was set in the
-  query.  host/nslookup skip servers that fail to set 'RA' when 'RD' is set
-  unless a server is explicitly set.
-- Integrate contibuted DLZ code into named.
-- Integrate contibuted IDN code from JPNIC.
-- libbind: corresponds to that from BIND 8.4.7.
-
-#### BIND 9.3.0
-
-- DNSSEC is now DS based (RFC 3658).
-- DNSSEC lookaside validation.
-- check-names is now implemented.
-- rrset-order is more complete.
-- IPv4/IPv6 transition support, dual-stack-servers.
-- IXFR deltas can now be generated when loading master files,
-  ixfr-from-differences.
-- It is now possible to specify the size of a journal, max-journal-size.
-- It is now possible to define a named set of master servers to be used in
-  masters clause, masters.
-- The advertised EDNS UDP size can now be set, edns-udp-size.
-- allow-v6-synthesis has been obsoleted.
-- Zones containing MD and MF will now be rejected.
-- dig, nslookup name. now report "Not Implemented" as NOTIMP rather than
-  NOTIMPL.  This will have impact on scripts that are looking for NOTIMPL.
-- libbind: corresponds to that from BIND 8.4.5.
-
-#### BIND 9.2.0
-
-- The size of the cache can now be limited using the "max-cache-size"
-  option.
-- The server can now automatically convert RFC1886-style recursive lookup
-  requests into RFC2874-style lookups, when enabled using the new option
-  "allow-v6-synthesis".  This allows stub resolvers that support AAAA
-  records but not A6 record chains or binary labels to perform lookups in
-  domains that make use of these IPv6 DNS features.
-- Performance has been improved.
-- The man pages now use the more portable "man" macros rather than the
-  "mandoc" macros, and are installed by "make install".
-- The named.conf parser has been completely rewritten.  It now supports
-  "include" directives in more places such as inside "view" statements, and
-  it no longer has any reserved words.
-- The "rndc status" command is now implemented.
-- rndc can now be configured automatically.
-- A BIND 8 compatible stub resolver library is now included in lib/bind.
-- OpenSSL has been removed from the distribution.  This means that to use
-  DNSSEC, OpenSSL must be installed and the --with-openssl option must be
-  supplied to configure.  This does not apply to the use of TSIG, which
-  does not require OpenSSL.
-- The source distribution now builds on Windows.  See
-  win32utils/readme1.txt and win32utils/win32-build.txt for details.
-- This distribution also includes a new lightweight stub resolver library
-  and associated resolver daemon that fully support forward and reverse
-  lookups of both IPv4 and IPv6 addresses.  This library is considered
-  experimental and is not a complete replacement for the BIND 8 resolver
-  library.  Applications that use the BIND 8 `res_*` functions to perform
-  DNS lookups or dynamic updates still need to be linked against the BIND 8
-  libraries.  For DNS lookups, they can also use the new "getrrsetbyname()"
-  API.
-- BIND 9.2 is capable of acting as an authoritative server for DNSSEC
-  secured zones.  This functionality is believed to be stable and complete
-  except for lacking support for verifications involving wildcard records
-  in secure zones.
-- When acting as a caching server, BIND 9.2 can be configured to perform
-  DNSSEC secure resolution on behalf of its clients.  This part of the
-  DNSSEC implementation is still considered experimental.  For detailed
-  information about the state of the DNSSEC implementation, see the file
-  doc/misc/dnssec.

Kyuafile

@@ -1,4 +0,0 @@
-syntax(2)
-test_suite('bind9')
-
-include('lib/Kyuafile')

Makefile.in

@@ -1,37 +1,37 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 1998-2001, 2003  Internet Software Consortium.
 #
-# Permission to use, copy, modify, and/or distribute this software for any
+# Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
 # copyright notice and this permission notice appear in all copies.
 #
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+# DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+# INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+# $Id: Makefile.in,v 1.41.2.2 2003/07/22 04:03:31 marka Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
-top_builddir =  @top_builddir@
 
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
-SUBDIRS =	make unit lib bin doc @LIBEXPORT@
+SUBDIRS =	make lib bin doc @LIBBIND@
 TARGETS =
 
-MANPAGES =	isc-config.sh.1
-
-HTMLPAGES =	isc-config.sh.html
-
-MANOBJS =	README HISTORY OPTIONS ${MANPAGES} ${HTMLPAGES}
-
 @BIND9_MAKE_RULES@
 
-newrr:
-	cd lib/dns; ${MAKE} newrr
+distclean::
+	@if [ "X@LIBBIND@" = "X" ] ; then \
+		i=lib/bind; \
+		echo "making $@ in `pwd`/$$i"; \
+		(cd $$i; ${MAKE} ${MAKEDEFS} $@) || exit 1; \
+	fi
 
 distclean::
 	rm -f config.cache config.h config.log config.status TAGS
@@ -43,78 +43,17 @@ distclean::
 maintainer-clean::
 	rm -f configure
 
-docclean manclean maintainer-clean::
-	rm -f ${MANOBJS}
-
-doc man:: ${MANOBJS}
-
 installdirs:
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${bindir} \
-	${DESTDIR}${localstatedir}/run ${DESTDIR}${sysconfdir}
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man1
+	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${bindir}
 
 install:: isc-config.sh installdirs
 	${INSTALL_SCRIPT} isc-config.sh ${DESTDIR}${bindir}
-	rm -f ${DESTDIR}${bindir}/bind9-config
-	@LN@ ${DESTDIR}${bindir}/isc-config.sh ${DESTDIR}${bindir}/bind9-config
-	${INSTALL_DATA} ${top_srcdir}/isc-config.sh.1 ${DESTDIR}${mandir}/man1
-	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
-	@LN@ ${DESTDIR}${mandir}/man1/isc-config.sh.1 ${DESTDIR}${mandir}/man1/bind9-config.1
-	${INSTALL_DATA} ${top_srcdir}/bind.keys ${DESTDIR}${sysconfdir}
-
-uninstall::
-	rm -f ${DESTDIR}${sysconfdir}/bind.keys
-	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
-	rm -f ${DESTDIR}${mandir}/man1/isc-config.sh.1
-	rm -f ${DESTDIR}${bindir}/bind9-config
-	rm -f ${DESTDIR}${bindir}/isc-config.sh
 
 tags:
 	rm -f TAGS
 	find lib bin -name "*.[ch]" -print | @ETAGS@ -
 
-test check:
-	@if test -n "`${PERL} ${top_srcdir}/bin/tests/system/testsock.pl 2>&- || echo fail`"; then \
-	echo I: NOTE: The tests were not run because they require that; \
-	echo I:	the IP addresses 10.53.0.1 through 10.53.0.8 are configured; \
-	echo I:	as alias addresses on the loopback interface.  Please run; \
-	echo I:	\'bin/tests/system/ifconfig.sh up\' as root to configure; \
-	echo I:	them, then rerun the tests. Run make force-test to run the; \
-	echo I:	tests anyway.; \
-	exit 1; \
-	fi
-	${MAKE} test-force
+check: test
 
-force-test: test-force
-
-test-force:
-	status=0; \
-	(cd bin/tests && ${MAKE} ${MAKEDEFS} test) || status=1; \
-	(test -f ${top_builddir}/unit/unittest.sh && \
-		$(SHELL) ${top_builddir}/unit/unittest.sh) || status=1; \
-	exit $$status
-
-README: README.md
-	${PANDOC} --email-obfuscation=none -s -t html README.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-HISTORY: HISTORY.md
-	${PANDOC} --email-obfuscation=none -s -t html HISTORY.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-OPTIONS: OPTIONS.md
-	${PANDOC} --email-obfuscation=none -s -t html OPTIONS.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-CONTRIBUTING: CONTRIBUTING.md
-	${PANDOC} --email-obfuscation=none -s -t html CONTRIBUTING.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-unit::
-	sh ${top_builddir}/unit/unittest.sh
-
-clean::
+test:
+	(cd bin/tests && ${MAKE} ${MAKEDEFS} test)

OPTIONS

@@ -1,29 +0,0 @@
-Setting the STD_CDEFINES environment variable before running configure can
-be used to enable certain compile-time options that are not explicitly
-defined in configure.
-
-Some of these settings are:
-
-Setting                   Description
-                          Don't ovewrite memory when allocating or freeing
--DISC_MEM_FILL=0          it; this improves performance but makes
-                          debugging more difficult.
-                          Don't track memory allocations by file and line
--DISC_MEM_TRACKLINES=0    number; this improves performance but makes
-                          debugging more difficult.
--DISC_FACILITY=LOG_LOCAL0 Change the default syslog facility for named
--DNS_CLIENT_DROPPORT=0    Disable dropping queries from particular
-                          well-known ports:
--DCHECK_SIBLING=0         Don't check sibling glue in named-checkzone
--DCHECK_LOCAL=0           Don't check out-of-zone addresses in
-                          named-checkzone
--DNS_RUN_PID_DIR=0        Create default PID files in ${localstatedir}/run
-                          rather than ${localstatedir}/run/{named,lwresd}/
-                          Enable DNSSEC signature chasing support in dig.
--DDIG_SIGCHASE=1          (Note: This feature is deprecated. Use delv
-                          instead.)
-                          Increase the maximum number of configurable
--DNS_RPZ_MAX_ZONES=64     response policy zones from 32 to 64; this is the
-                          highest possible setting
--DISC_HEAP_CHECK          Test heap consistency after every heap
-                          operation; used when debugging

OPTIONS.md

@@ -1,33 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-Setting the `STD_CDEFINES` environment variable before running `configure`
-can be used to enable certain compile-time options that are not explicitly
-defined in `configure`.
-
-Some of these settings are:
-
-|Setting                            |Description |
-|-----------------------------------|----------------------------------------|
-|`-DISC_MEM_FILL=0`|Don't ovewrite memory when allocating or freeing it; this improves performance but makes debugging more difficult.|
-|`-DISC_MEM_TRACKLINES=0`|Don't track memory allocations by file and line number; this improves performance but makes debugging more difficult.|
-|<nobr>`-DISC_FACILITY=LOG_LOCAL0`</nobr>|Change the default syslog facility for `named`|
-|`-DNS_CLIENT_DROPPORT=0`|Disable dropping queries from particular well-known ports:|
-|`-DCHECK_SIBLING=0`|Don't check sibling glue in `named-checkzone`|
-|`-DCHECK_LOCAL=0`|Don't check out-of-zone addresses in `named-checkzone`|
-|`-DNS_RUN_PID_DIR=0`|Create default PID files in `${localstatedir}/run` rather than `${localstatedir}/run/{named,lwresd}/`|
-|`-DDIG_SIGCHASE=1`|Enable DNSSEC signature chasing support in `dig`.  (Note: This feature is deprecated. Use `delv` instead.)|
-|`-DNS_RPZ_MAX_ZONES=64`|Increase the maximum number of configurable response policy zones from 32 to 64; this is the highest possible setting|
-|`-DISC_HEAP_CHECK`|Test heap consistency after every heap operation; used when debugging|

README

@@ -1,464 +1,341 @@
 BIND 9
 
-Contents
-
- 1. Introduction
- 2. Reporting bugs and getting help
- 3. Contributing to BIND
- 4. BIND 9.9 features
- 5. Building BIND
- 6. macOS
- 7. Compile-time options
- 8. Automated testing
- 9. Documentation
-10. Change log
-11. Acknowledgments
-
-Introduction
-
-BIND (Berkeley Internet Name Domain) is a complete, highly portable
-implementation of the DNS (Domain Name System) protocol.
-
-The BIND name server, named, is able to serve as an authoritative name
-server, recursive resolver, DNS forwarder, or all three simultaneously. It
-implements views for split-horizon DNS, automatic DNSSEC zone signing and
-key management, catalog zones to facilitate provisioning of zone data
-throughout a name server constellation, response policy zones (RPZ) to
-protect clients from malicious data, response rate limiting (RRL) and
-recursive query limits to reduce distributed denial of service attacks,
-and many other advanced DNS features. BIND also includes a suite of
-administrative tools, including the dig and delv DNS lookup tools,
-nsupdate for dynamic DNS zone updates, rndc for remote name server
-administration, and more.
-
-BIND 9 is a complete re-write of the BIND architecture that was used in
-versions 4 and 8. Internet Systems Consortium (https://www.isc.org), a 501
-(c)(3) public benefit corporation dedicated to providing software and
-services in support of the Internet infrastructure, developed BIND 9 and
-is responsible for its ongoing maintenance and improvement. BIND is open
-source software licenced under the terms of the ISC License for all
-versions up to and including BIND 9.10, and the Mozilla Public License
-version 2.0 for all subsequent verisons.
-
-For a summary of features introduced in past major releases of BIND, see
-the file HISTORY.
-
-For a detailed list of changes made throughout the history of BIND 9, see
-the file CHANGES. See below for details on the CHANGES file format.
-
-For up-to-date release notes and errata, see http://www.isc.org/software/
-bind9/releasenotes
-
-Reporting bugs and getting help
-
-To report non-security-sensitive bugs or request new features, you may
-open an Issue in the BIND 9 project on the ISC GitLab server at https://
-gitlab.isc.org/isc-projects/bind9.
-
-Please note that, unless you explicitly mark the newly created Issue as
-"confidential", it will be publicly readable. Please do not include any
-information in bug reports that you consider to be confidential unless the
-issue has been marked as such. In particular, if submitting the contents
-of your configuration file in a non-confidential Issue, it is advisable to
-obscure key secrets: this can be done automatically by using
-named-checkconf -px.
-
-If the bug you are reporting is a potential security issue, such as an
-assertion failure or other crash in named, please do NOT use GitLab to
-report it. Instead, please send mail to security-officer@isc.org.
-
-Professional support and training for BIND are available from ISC at
-https://www.isc.org/support.
-
-To join the BIND Users mailing list, or view the archives, visit https://
-lists.isc.org/mailman/listinfo/bind-users.
-
-If you're planning on making changes to the BIND 9 source code, you may
-also want to join the BIND Workers mailing list, at https://lists.isc.org/
-mailman/listinfo/bind-workers.
-
-Contributing to BIND
-
-ISC maintains a public git repository for BIND; details can be found at
-http://www.isc.org/git/.
-
-Information for BIND contributors can be found in the following files: -
-General information: doc/dev/contrib.md - BIND 9 code style: doc/dev/
-style.md - BIND architecture and developer guide: doc/dev/dev.md
-
-Patches for BIND may be submitted as Merge Requests in the ISC GitLab
-server at at https://gitlab.isc.org/isc-projects/bind9/merge_requests.
-
-By default, external contributors don't have ability to fork BIND in the
-GitLab server, but if you wish to contribute code to BIND, you may request
-permission to do so. Thereafter, you can create git branches and directly
-submit requests that they be reviewed and merged.
-
-If you prefer, you may also submit code by opening a GitLab Issue and
-including your patch as an attachment, preferably generated by git
-format-patch.
-
-BIND 9.9 features
-
-BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
-releases. New features include:
-
-  * Inline signing, allowing automatic DNSSEC signing of master zones
-    without modification of the zonefile, or "bump in the wire" signing in
-    slaves.
-  * NXDOMAIN redirection.
-  * New rndc flushtree command clears all data under a given name from the
-    DNS cache.
-  * New rndc sync command dumps pending changes in a dynamic zone to disk
-    without a freeze/thaw cycle.
-  * New rndc signing command displays or clears signing status records in
-    auto-dnssec zones.
-  * NSEC3 parameters for auto-dnssec zones can now be set prior to
-    signing, eliminating the need to initially sign with NSEC.
-  * Startup time improvements on large authoritative servers.
-  * Slave zones are now saved in raw format by default.
-  * Several improvements to response policy zones (RPZ).
-  * Improved hardware scalability by using multiple threads to listen for
-    queries and using finer-grained client locking
-  * The also-notify option now takes the same syntax as masters, so it can
-    used named masterlists and TSIG keys.
-  * dnssec-signzone -D writes an output file containing only DNSSEC data,
-    which can be included by the primary zone file.
-  * dnssec-signzone -R forces removal of signatures that are not expired
-    but were created by a key which no longer exists.
-  * dnssec-signzone -X allows a separate expiration date to be specified
-    for DNSKEY signatures from other signatures.
-  * New -L option to dnssec-keygen, dnssec-settime, and
-    dnssec-keyfromlabel sets the default TTL for the key.
-  * dnssec-dsfromkey now supports reading from standard input, to make it
-    easier to convert DNSKEY to DS.
-  * RFC 1918 reverse zones have been added to the empty-zones table per
-    RFC
-
-6303.
-
-  * Dynamic updates can now optionally set the zone's SOA serial number to
-    the current UNIX time.
-  * DLZ modules can now retrieve the source IP address of the querying
-    client.
-  * request-ixfr option can now be set at the per-zone level.
-  * dig +rrcomments turns on comments about DNSKEY records, indicating
-    their key ID, algorithm and function
-  * Simplified nsupdate syntax and added readline support
-
-BIND 9.9.1
-
-BIND 9.9.1 is a maintenance release.
-
-BIND 9.9.2
-
-BIND 9.9.2 is a maintenance release, and addresses the security flaw
-described in CVE-2012-4244.
-
-BIND 9.9.3
-
-BIND 9.9.3 is a maintenance release and addresses the security flaws
-described in CVE-2012-5688, CVE-2012-5689 and CVE-2013-2266.
-
-BIND 9.9.4
-
-BIND 9.9.4 is a maintenance release, and addresses the security flaws
-described in CVE-2013-3919 and CVE-2013-4854. It also introduces DNS
-Response Rate Limiting (DNS RRL) as a compile-time option. To use this
-feature, configure with the --enable-rrl option.
-
-BIND 9.9.5
-
-BIND 9.9.5 is a maintenance release, and addresses the security flaws
-described in CVE-2013-6320 and CVE-2014-0591. It also includes the
-following functional enhancements:
-
-  * named now preserves the capitalization of names when responding to
-    queries.
-  * new dnssec-importkey command allows the use of offline DNSSEC keys
-    with automatic DNSKEY management.
-  * When re-signing a zone, the new dnssec-signzone -Q option drops
-    signatures from keys that are still published but are no longer
-    active.
-  * named-checkconf -px will print the contents of configuration files
-    with the shared secrets obscured, making it easier to share
-    configuration (e.g. when submitting a bug report) without revealing
-    private information.
-
-BIND 9.9.6
-
-BIND 9.9.6 is a maintenance release, and also includes the following new
-functionality.
-
-  * The former behavior with respect to capitalization of names (prior to
-    BIND 9.9.5) can be restored for specific clients via the new
-    no-case-compress ACL.
-
-BIND 9.9.7
-
-BIND 9.9.7 is a maintenance release, and addresses the security flaws
-described in CVE-2014-8500 and CVE-2015-1349.
-
-BIND 9.9.8
-
-BIND 9.9.8 is a maintenance release, and addresses the security flaws
-described in CVE-2015-4620, CVE-2015-5477, CVE-2015-5722, and
-CVE-2015-5986.
-
-It also makes the following new features available via a compile-time
-option:
-
-  * New "fetchlimit" quotas are now available for the use of recursive
-    resolvers that are are under high query load for domains whose
-    authoritative servers are nonresponsive or are experiencing a denial
-    of service attack.
-      + fetches-per-server limits the number of simultaneous queries that
-        can be sent to any single authoritative server. The configured
-        value is a starting point; it is automatically adjusted downward
-        if the server is partially or completely non-responsive. The
-        algorithm used to adjust the quota can be configured via the
-        fetch-quota-params option.
-      + fetches-per-zone limits the number of simultaneous queries that
-        can be sent for names within a single domain. (Note: Unlike
-        fetches-per-server, this value is not self-tuning.)
-      + New stats counters have been added to count queries spilled due to
-        these quotas. NOTE: These options are NOT built in by default; use
-        configure --enable-fetchlimit to enable them.
-
-BIND 9.9.9
-
-BIND 9.9.9 is a maintenance release and addresses bugs found in BIND 9.9.8
-and earlier, as well as the security flaws described in CVE-2015-8000,
-CVE-2015-8461, CVE-2015-8704, CVE-2016-1285, CVE-2016-1286, CVE-2016-2775
-and CVE-2016-2776.
-
-BIND 9.9.10
-
-BIND 9.9.10 is a maintenance release and addresses the security flaws
-disclosed in CVE-2016-2775, CVE-2016-2776, CVE-2016-6170, CVE-2016-8864,
-CVE-2016-9131, CVE-2016-9147, CVE-2016-9444, CVE-2017-3135, CVE-2017-3136,
-CVE-2017-3137, and CVE-2017-3138.
-
-BIND 9.9.11
-
-BIND 9.9.11 is a maintenance release, and addresses the security flaws
-disclosed in CVE-2017-3140, CVE-2017-3141, CVE-2017-3142 and
-CVE-2017-3143.
-
-BIND 9.9.12
-
-BIND 9.9.12 is a maintenance release, and addresses the security flaw
-disclosed in CVE-2017-3145.
-
-BIND 9.9.13
-
-BIND 9.9.13 is a maintenance release, and addresses the security flaw
-disclosed in CVE-2018-5738.
-
-Building BIND
-
-BIND requires a UNIX or Linux system with an ANSI C compiler, basic POSIX
-support, and a 64-bit integer type. Successful builds have been observed
-on many versions of Linux and UNIX, including RedHat, Fedora, Debian,
-Ubuntu, SuSE, Slackware, FreeBSD, NetBSD, OpenBSD, Mac OS X, Solaris,
-HP-UX, AIX, SCO OpenServer, and OpenWRT.
-
-BIND is also available for Windows XP, 2003, 2008, and higher. See
-win32utils/readme1st.txt for details on building for Windows systems.
-
-To build on a UNIX or Linux system, use:
-
-    $ ./configure
-    $ make
-
-If you're planning on making changes to the BIND 9 source, you should run
-make depend. If you're using Emacs, you might find make tags helpful.
-
-Several environment variables that can be set before running configure
-will affect compilation:
-
-Variable       Description
-CC             The C compiler to use. configure tries to figure out the
-               right one for supported systems.
-               C compiler flags. Defaults to include -g and/or -O2 as
-CFLAGS         supported by the compiler. Please include '-g' if you need
-               to set CFLAGS.
-               System header file directories. Can be used to specify
-STD_CINCLUDES  where add-on thread or IPv6 support is, for example.
-               Defaults to empty string.
-               Any additional preprocessor symbols you want defined.
-STD_CDEFINES   Defaults to empty string. For a list of possible settings,
-               see the file OPTIONS.
-LDFLAGS        Linker flags. Defaults to empty string.
-BUILD_CC       Needed when cross-compiling: the native C compiler to use
-               when building for the target system.
-BUILD_CFLAGS   Optional, used for cross-compiling
-BUILD_CPPFLAGS
-BUILD_LDFLAGS
-BUILD_LIBS
-
-macOS
-
-Building on macOS assumes that the "Command Tools for Xcode" is installed.
-This can be downloaded from https://developer.apple.com/download/more/ or
-if you have Xcode already installed you can run "xcode-select --install".
-This will add /usr/include to the system and install the compiler and
-other tools so that they can be easily found.
-
-Compile-time options
-
-To see a full list of configuration options, run configure --help.
-
-On most platforms, BIND 9 is built with multithreading support, allowing
-it to take advantage of multiple CPUs. You can configure this by
-specifying --enable-threads or --disable-threads on the configure command
-line. The default is to enable threads, except on some older operating
-systems on which threads are known to have had problems in the past.
-(Note: Prior to BIND 9.10, the default was to disable threads on Linux
-systems; this has now been reversed. On Linux systems, the threaded build
-is known to change BIND's behavior with respect to file permissions; it
-may be necessary to specify a user with the -u option when running named.)
-
-To build shared libraries, specify --with-libtool on the configure command
-line.
-
-Certain compiled-in constants and default settings can be increased to
-values better suited to large servers with abundant memory resources (e.g,
-64-bit servers with 12G or more of memory) by specifying --with-tuning=
-large on the configure command line. This can improve performance on big
-servers, but will consume more memory and may degrade performance on
-smaller systems.
-
-For the server to support DNSSEC, you need to build it with crypto
-support. To use OpenSSL, you should have OpenSSL 1.0.2e or newer
-installed. If the OpenSSL library is installed in a nonstandard location,
-specify the prefix using "--with-openssl=<PREFIX>" on the configure
-command line. To use a PKCS#11 hardware service module for cryptographic
-operations, specify the path to the PKCS#11 provider library using
-"--with-pkcs11=<PREFIX>", and configure BIND with
-"--enable-native-pkcs11".
-
-To support the HTTP statistics channel, the server must be linked with
-libxml2 http://xmlsoft.org If this is installed at a nonstandard location,
-specify the prefix using --with-libxml2=/prefix.
-
-Portions of BIND that are written in Python, including dnssec-coverage,
-dnssec-checkds, and some of the system tests, require the 'argparse'
-module to be available. 'argparse' is a standard module as of Python 2.7
-and Python 3.2.
-
-On some platforms it is necessary to explicitly request large file support
-to handle files bigger than 2GB. This can be done by using
---enable-largefile on the configure command line.
-
-Support for the "fixed" rrset-order option can be enabled or disabled by
-specifying --enable-fixed-rrset or --disable-fixed-rrset on the configure
-command line. By default, fixed rrset-order is disabled to reduce memory
-footprint.
-
-If your operating system has integrated support for IPv6, it will be used
-automatically. If you have installed KAME IPv6 separately, use --with-kame
-[=PATH] to specify its location.
-
-make install will install named and the various BIND 9 libraries. By
-default, installation is into /usr/local, but this can be changed with the
---prefix option when running configure.
-
-You may specify the option --sysconfdir to set the directory where
-configuration files like named.conf go by default, and --localstatedir to
-set the default parent directory of run/named.pid. For backwards
-compatibility with BIND 8, --sysconfdir defaults to /etc and
---localstatedir defaults to /var if no --prefix option is given. If there
-is a --prefix option, sysconfdir defaults to $prefix/etc and localstatedir
-defaults to $prefix/var.
-
-Automated testing
-
-A system test suite can be run with make test. The system tests require
-you to configure a set of virtual IP addresses on your system (this allows
-multiple servers to run locally and communicate with one another). These
-IP addresses can be configured by running the command bin/tests/system/
-ifconfig.sh up as root.
-
-Some tests require Perl and the Net::DNS and/or IO::Socket::INET6 modules,
-and will be skipped if these are not available. Some tests require Python
-and the 'dnspython' module and will be skipped if these are not available.
-See bin/tests/system/README for further details.
-
-Unit tests are implemented using Automated Testing Framework (ATF). To run
-them, use configure --with-atf, then run make test or make unit.
+	BIND version 9 is a major rewrite of nearly all aspects of the
+	underlying BIND architecture.  Some of the important features of
+	BIND 9 are:
+
+		- DNS Security
+			DNSSEC (signed zones)
+			TSIG (signed DNS requests)
+
+		- IP version 6
+			Answers DNS queries on IPv6 sockets
+			IPv6 resource records (AAAA)
+			Experimental IPv6 Resolver Library
+
+		- DNS Protocol Enhancements
+			IXFR, DDNS, Notify, EDNS0
+			Improved standards conformance
+
+		- Views
+			One server process can provide multiple "views" of
+			the DNS namespace, e.g. an "inside" view to certain
+			clients, and an "outside" view to others.
+
+		- Multiprocessor Support
+
+		- Improved Portability Architecture
+
+
+	BIND version 9 development has been underwritten by the following
+	organisations:
+
+		Sun Microsystems, Inc.
+		Hewlett Packard
+		Compaq Computer Corporation
+		IBM
+		Process Software Corporation
+		Silicon Graphics, Inc.
+		Network Associates, Inc.
+		U.S. Defense Information Systems Agency
+		USENIX Association
+		Stichting NLnet - NLnet Foundation
+		Nominum, Inc.
+
+
+BIND 9.2.3
+	
+	BIND 9.2.3 is a maintenance release, containing fixes for
+	a number of bugs in 9.2.2.
+
+	A new zone type delegation-only is now supported.
+	A new view option root-delegation-only is now supported.
+
+	libbind: corresponds to that from BIND 8.4.0.
+
+BIND 9.2.2
+
+	BIND 9.2.2 is a maintenance release, containing fixes for
+	a number of bugs in 9.2.1 but no new features.  RFC 2535
+	style DNSSEC is disabled as it is incompatible with the
+	forthcoming DS style DNSSEC.
+
+	libbind: from BIND 8.3.3. [CERT CA-2002-19]
+	Minimum OpenSSL version now 0.9.6e. [CERT CA-2002-23]
+
+BIND 9.2.1
+
+	BIND 9.2.1 is a maintenance release, containing fixes for
+	a number of bugs in 9.2.0 but no new features.
+
+	NOTE: dig, nslookup name. now report "Not Implemented" as
+	NOTIMP rather than NOTIMPL.  This will have impact on scripts
+	that are looking for NOTIMPL.
+
+BIND 9.2.0
+
+	BIND 9.2.0 introduces a number of new features over 9.1,
+	including:
+
+	  - The size of the cache can now be limited using the
+            "max-cache-size" option.
+
+	  - The server can now automatically convert RFC1886-style
+	    recursive lookup requests into RFC2874-style lookups, 
+	    when enabled using the new option "allow-v6-synthesis".
+            This allows stub resolvers that support AAAA records
+            but not A6 record chains or binary labels to perform
+            lookups in domains that make use of these IPv6 DNS
+            features.
+
+	  - Performance has been improved.
+
+	  - The man pages now use the more portable "man" macros
+	    rather than the "mandoc" macros, and are installed
+            by "make install".
+
+          - The named.conf parser has been completely rewritten.
+            It now supports "include" directives in more
+            places such as inside "view" statements, and it no
+            longer has any reserved words.
+
+          - The "rndc status" command is now implemented.
+
+	  - rndc can now be configured automatically.
+
+	  - A BIND 8 compatible stub resolver library is now
+	    included in lib/bind.
+
+	  - OpenSSL has been removed from the distribution.  This
+	    means that to use DNSSEC, OpenSSL must be installed and
+	    the --with-openssl option must be supplied to configure.
+	    This does not apply to the use of TSIG, which does not
+	    require OpenSSL.
+
+	  - The source distribution now builds on Windows NT/2000.
+	    See win32utils/readme1.txt and win32utils/win32-build.txt
+	    for details.
+
+	This distribution also includes a new lightweight stub
+	resolver library and associated resolver daemon that fully
+	support forward and reverse lookups of both IPv4 and IPv6
+	addresses.  This library is considered experimental and
+	is not a complete replacement for the BIND 8 resolver library.
+	Applications that use the BIND 8 res_* functions to perform
+	DNS lookups or dynamic updates still need to be linked against
+	the BIND 8 libraries.  For DNS lookups, they can also use the
+	new "getrrsetbyname()" API.
+
+	BIND 9.2 is capable of acting as an authoritative server
+	for DNSSEC secured zones.  This functionality is believed to
+	be stable and complete except for lacking support for wildcard
+	records in secure zones.
+
+	When acting as a caching server, BIND 9.2 can be configured
+	to perform DNSSEC secure resolution on behalf of its clients.
+	This part of the DNSSEC implementation is still considered
+	experimental.  For detailed information about the state of the
+	DNSSEC implementation, see the file doc/misc/dnssec.
+
+	There are a few known bugs:
+
+		On some systems, IPv6 and IPv4 sockets interact in
+		unexpected ways.  For details, see doc/misc/ipv6.
+		To reduce the impact of these problems, the server
+		no longer listens for requests on IPv6 addresses
+		by default.  If you need to accept DNS queries over
+		IPv6, you must specify "listen-on-v6 { any; };"
+		in the named.conf options statement.
+
+		FreeBSD prior to 4.2 (and 4.2 if running as non-root)
+		and OpenBSD prior to 2.8 log messages like
+		"fcntl(8, F_SETFL, 4): Inappropriate ioctl for device".
+		This is due to a bug in "/dev/random" and impacts the
+		server's DNSSEC support.
+
+		OS X 10.1.4 (Darwin 5.4) reports errors like
+		"fcntl(3, F_SETFL, 4): Operation not supported by device".
+		This is due to a bug in "/dev/random" and impacts the
+		server's DNSSEC support.
+
+		--with-libtool does not work on AIX.
+
+	A bug in the Windows 2000 DNS server can cause zone transfers
+	from a BIND 9 server to a W2K server to fail.  For details,
+	see the "Zone Transfers" section in doc/misc/migration.
+
+	For a detailed list of user-visible changes from
+	previous releases, see the CHANGES file.
+
+
+Building
+
+	BIND 9 currently requires a UNIX system with an ANSI C compiler,
+	basic POSIX support, and a 64 bit integer type.
+
+	We've had successful builds and tests on the following systems:
+
+		AIX 4.3
+		COMPAQ Tru64 UNIX 4.0D
+		COMPAQ Tru64 UNIX 5 (with IPv6 EAK)
+		FreeBSD 3.4-STABLE, 3.5, 4.0, 4.1
+		HP-UX 11.x, x < 11
+		IRIX64 6.5
+		NetBSD 1.5
+		Red Hat Linux 6.0, 6.1, 6.2, 7.0
+		Solaris 2.6, 7, 8
+		Windows NT/W2K
+
+	Additionally, we have unverified reports of success building
+	previous versions of BIND 9 from users of the following systems:
+
+		AIX 5L
+		SuSE Linux 7.0
+		Slackware Linux 7.x, 8.0
+	        Red Hat Linux 7.1
+		Debian GNU/Linux 2.2 and 3.0
+		OpenBSD 2.6, 2.8, 2.9
+		UnixWare 7.1.1
+		HP-UX 10.20
+		BSD/OS 4.2
+		OpenUNIX 8
+		Mac OS X 10.1
+
+	To build, just
+
+		./configure
+		make
+
+	Do not use a parallel "make".
+
+	Several environment variables that can be set before running
+	configure will affect compilation:
+
+	    CC
+		The C compiler to use.	configure tries to figure
+		out the right one for supported systems.
+
+	    CFLAGS
+		C compiler flags.  Defaults to include -g and/or -O2
+		as supported by the compiler.
+
+	    STD_CINCLUDES
+		System header file directories.	 Can be used to specify
+		where add-on thread or IPv6 support is, for example.
+		Defaults to empty string.
+
+	    STD_CDEFINES
+		Any additional preprocessor symbols you want defined.
+		Defaults to empty string.
+
+		Possible settings:
+		-DISC_RFC2535
+			Enable support RFC 2535 style DNSSEC.  This
+			is incompatable with the upcoming DS support
+			and SHOULD NOT be set unless you are currently
+			making use of it.
+
+	To build shared libraries, specify "--with-libtool" on the
+	configure command line.
+
+	For the server to support DNSSEC, you need to build it
+	with crypto support.  You must have OpenSSL 0.9.5a
+	or newer installed and specify "--with-openssl" on the
+	configure command line.  If OpenSSL is installed under
+	a nonstandard prefix, you can tell configure where to
+	look for it using "--with-openssl=/prefix".
+
+	To build libbind (the BIND 8 resolver library), specify
+	"--enable-libbind" on the configure command line.
+
+	On some platforms, BIND 9 can be built with multithreading
+	support, allowing it to take advantage of multiple CPUs.
+	You can specify whether to build a multithreaded BIND 9 
+	by specifying "--enable-threads" or "--disable-threads"
+	on the configure command line.  The default is operating
+	system dependent.
+
+	If your operating system has integrated support for IPv6, it
+	will be used automatically.  If you have installed KAME IPv6
+	separately, use "--with-kame[=PATH]" to specify its location.
+
+	"make install" will install "named" and the various BIND 9 libraries.
+	By default, installation is into /usr/local, but this can be changed
+	with the "--prefix" option when running "configure".
+
+	You may specify the option "--sysconfdir" to set the directory 
+	where configuration files like "named.conf" go by default,
+	and "--localstatedir" to set the default parent directory
+	of "run/named.pid".   For backwards compatibility with BIND 8,
+	--sysconfdir defaults to "/etc" and --localstatedir defaults to
+	"/var" if no --prefix option is given.  If there is a --prefix
+	option, sysconfdir defaults to "$prefix/etc" and localstatedir
+	defaults to "$prefix/var".
+
+	To see additional configure options, run "configure --help".
+	Note that the help message does not reflect the BIND 8 
+	compatibility defaults for sysconfdir and localstatedir.
+
+	If you're planning on making changes to the BIND 9 source, you
+	should also "make depend".  If you're using Emacs, you might find
+	"make tags" helpful.
+
+	If you need to re-run configure please run "make distclean" first.
+	This will ensure that all the option changes take.
+
+	Building with gcc is not supported, unless gcc is the vendor's usual
+	compiler (e.g. the various BSD systems, Linux).
+	
+	* gcc-3.2.1 and gcc-3.1.1 is known to cause problems with solaris-x86
+	  if the optimiser is enabled.  Use -O0 to disable the optimiser.
+	* gcc ultrasparc generates incorrect code at -02.
+
+	A limited test suite can be run with "make test".  Many of
+	the tests require you to configure a set of virtual IP addresses
+	on your system, and some require Perl; see bin/tests/system/README
+	for details.
 
 Documentation
 
-The BIND 9 Administrator Reference Manual is included with the source
-distribution, in DocBook XML, HTML and PDF format, in the doc/arm
-directory.
+	The BIND 9 Administrator Reference Manual is included with the
+	source distribution in DocBook XML and HTML format, in the
+	doc/arm directory.
 
-Some of the programs in the BIND 9 distribution have man pages in their
-directories. In particular, the command line options of named are
-documented in bin/named/named.8.
+	Some of the programs in the BIND 9 distribution have man pages
+	in their directories.  In particular, the command line
+	options of "named" are documented in /bin/named/named.8.
+	There is now also a set of man pages for the lwres library.
 
-Frequently (and not-so-frequently) asked questions and their answers can
-be found in the ISC Knowledge Base at https://kb.isc.org.
+	If you are upgrading from BIND 8, please read the migration
+	notes in doc/misc/migration.  If you are upgrading from
+	BIND 4, read doc/misc/migration-4to9.
 
-Additional information on various subjects can be found in other README
-files throughout the source tree.
+	Frequently asked questions and their answers can be found in
+	FAQ.
 
-Change log
 
-A detailed list of all changes that have been made throughout the
-development BIND 9 is included in the file CHANGES, with the most recent
-changes listed first. Change notes include tags indicating the category of
-the change that was made; these categories are:
+Bug Reports and Mailing Lists
 
-Category       Description
-[func]         New feature
-[bug]          General bug fix
-[security]     Fix for a significant security flaw
-[experimental] Used for new features when the syntax or other aspects of
-               the design are still in flux and may change
-[port]         Portability enhancement
-[maint]        Updates to built-in data such as root server addresses and
-               keys
-[tuning]       Changes to built-in configuration defaults and constants to
-               improve performance
-[performance]  Other changes to improve server performance
-[protocol]     Updates to the DNS protocol such as new RR types
-[test]         Changes to the automatic tests, not affecting server
-               functionality
-[cleanup]      Minor corrections and refactoring
-[doc]          Documentation
-[contrib]      Changes to the contributed tools and libraries in the
-               'contrib' subdirectory
-               Used in the master development branch to reserve change
-[placeholder]  numbers for use in other branches, e.g. when fixing a bug
-               that only exists in older releases
+	Bugs reports should be sent to
 
-In general, [func] and [experimental] tags will only appear in new-feature
-releases (i.e., those with version numbers ending in zero). Some new
-functionality may be backported to older releases on a case-by-case basis.
-All other change types may be applied to all currently-supported releases.
+		bind9-bugs@isc.org
 
-Acknowledgments
+	Configuration questions should be sent to the BIND 9 Users
+	mailing list.  Compilation questions should be sent to the
+	BIND 9 Users mailing list.
 
-  * The original development of BIND 9 was underwritten by the following
-    organizations:
+	To join the BIND 9 Users mailing list, send mail to
+
+		bind9-users-request@isc.org
+ 
+	archives of which can be found via
+
+		http://www.isc.org/ml-archives/
+
+	If you're planning on making changes to the BIND 9 source
+	code, you might want to join the BIND Workers mailing list.
+	Send mail to
+
+		bind-workers-request@isc.org
 
-    Sun Microsystems, Inc.
-    Hewlett Packard
-    Compaq Computer Corporation
-    IBM
-    Process Software Corporation
-    Silicon Graphics, Inc.
-    Network Associates, Inc.
-    U.S. Defense Information Systems Agency
-    USENIX Association
-    Stichting NLnet - NLnet Foundation
-    Nominum, Inc.
 
-  * This product includes software developed by the OpenSSL Project for
-    use in the OpenSSL Toolkit. http://www.OpenSSL.org/
-  * This product includes cryptographic software written by Eric Young
-    (eay@cryptsoft.com)
-  * This product includes software written by Tim Hudson
-    (tjh@cryptsoft.com)

README.md

@@ -1,472 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-# BIND 9
-
-### Contents
-
-1. [Introduction](#intro)
-1. [Reporting bugs and getting help](#help)
-1. [Contributing to BIND](#contrib)
-1. [BIND 9.9 features](#features)
-1. [Building BIND](#build)
-1. [macOS](#macos)
-1. [Compile-time options](#opts)
-1. [Automated testing](#testing)
-1. [Documentation](#doc)
-1. [Change log](#changes)
-1. [Acknowledgments](#ack)
-
-### <a name="intro"/> Introduction
-
-BIND (Berkeley Internet Name Domain) is a complete, highly portable
-implementation of the DNS (Domain Name System) protocol.
-
-The BIND name server, `named`, is able to serve as an authoritative name
-server, recursive resolver, DNS forwarder, or all three simultaneously.  It
-implements views for split-horizon DNS, automatic DNSSEC zone signing and
-key management, catalog zones to facilitate provisioning of zone data
-throughout a name server constellation, response policy zones (RPZ) to
-protect clients from malicious data, response rate limiting (RRL) and
-recursive query limits to reduce distributed denial of service attacks,
-and many other advanced DNS features.  BIND also includes a suite of
-administrative tools, including the `dig` and `delv` DNS lookup tools,
-`nsupdate` for dynamic DNS zone updates, `rndc` for remote name server
-administration, and more.
-
-BIND 9 is a complete re-write of the BIND architecture that was used in
-versions 4 and 8.  Internet Systems Consortium
-([https://www.isc.org](https://www.isc.org)), a 501(c)(3) public benefit
-corporation dedicated to providing software and services in support of the
-Internet infrastructure, developed BIND 9 and is responsible for its
-ongoing maintenance and improvement.  BIND is open source software
-licenced under the terms of the ISC License for all versions up to and
-including BIND 9.10, and the Mozilla Public License version 2.0 for all
-subsequent verisons.
-
-For a summary of features introduced in past major releases of BIND,
-see the file [HISTORY](HISTORY.md).
-
-For a detailed list of changes made throughout the history of BIND 9, see
-the file [CHANGES](CHANGES). See [below](#changes) for details on the
-CHANGES file format.
-
-For up-to-date release notes and errata, see
-[http://www.isc.org/software/bind9/releasenotes](http://www.isc.org/software/bind9/releasenotes)
-
-### <a name="help"/> Reporting bugs and getting help
-
-To report non-security-sensitive bugs or request new features, you may
-open an Issue in the BIND 9 project on the
-[ISC GitLab server](https://gitlab.isc.org) at
-[https://gitlab.isc.org/isc-projects/bind9](https://gitlab.isc.org/isc-projects/bind9).
-
-Please note that, unless you explicitly mark the newly created Issue as
-"confidential", it will be publicly readable.  Please do not include any
-information in bug reports that you consider to be confidential unless
-the issue has been marked as such.  In particular, if submitting the
-contents of your configuration file in a non-confidential Issue, it is
-advisable to obscure key secrets: this can be done automatically by
-using `named-checkconf -px`.
-
-If the bug you are reporting is a potential security issue, such as an
-assertion failure or other crash in `named`, please do *NOT* use GitLab to
-report it. Instead, please send mail to
-[security-officer@isc.org](mailto:security-officer@isc.org).
-
-Professional support and training for BIND are available from
-ISC at [https://www.isc.org/support](https://www.isc.org/support).
-
-To join the __BIND Users__ mailing list, or view the archives, visit
-[https://lists.isc.org/mailman/listinfo/bind-users](https://lists.isc.org/mailman/listinfo/bind-users).
-
-If you're planning on making changes to the BIND 9 source code, you
-may also want to join the __BIND Workers__ mailing list, at
-[https://lists.isc.org/mailman/listinfo/bind-workers](https://lists.isc.org/mailman/listinfo/bind-workers).
-
-### <a name="contrib"/> Contributing to BIND
-
-ISC maintains a public git repository for BIND; details can be found
-at [http://www.isc.org/git/](http://www.isc.org/git/).
-
-Information for BIND contributors can be found in the following files:
-- General information: [doc/dev/contrib.md](doc/dev/contrib.md)
-- BIND 9 code style: [doc/dev/style.md](doc/dev/style.md)
-- BIND architecture and developer guide: [doc/dev/dev.md](doc/dev/dev.md)
-
-Patches for BIND may be submitted as
-[Merge Requests](https://gitlab.isc.org/isc-projects/bind9/merge_requests)
-in the [ISC GitLab server](https://gitlab.isc.org) at
-at [https://gitlab.isc.org/isc-projects/bind9/merge_requests](https://gitlab.isc.org/isc-projects/bind9/merge_requests).
-
-By default, external contributors don't have ability to fork BIND in the
-GitLab server, but if you wish to contribute code to BIND, you may request
-permission to do so. Thereafter, you can create git branches and directly
-submit requests that they be reviewed and merged.
-
-If you prefer, you may also submit code by opening a
-[GitLab Issue](https://gitlab.isc.org/isc-projects/bind9/issues) and
-including your patch as an attachment, preferably generated by
-`git format-patch`.
-
-### <a name="features"/> BIND 9.9 features
-
-BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
-releases.  New features include:
-
-* Inline signing, allowing automatic DNSSEC signing of master zones without
-  modification of the zonefile, or "bump in the wire" signing in slaves.
-* NXDOMAIN redirection.
-* New `rndc flushtree` command clears all data under a given name from the
-  DNS cache.
-* New `rndc sync` command dumps pending changes in a dynamic zone to disk
-  without a freeze/thaw cycle.
-* New `rndc signing` command displays or clears signing status records in
-  `auto-dnssec` zones.
-* NSEC3 parameters for `auto-dnssec` zones can now be set prior to signing,
-  eliminating the need to initially sign with NSEC.
-* Startup time improvements on large authoritative servers.
-* Slave zones are now saved in raw format by default.
-* Several improvements to response policy zones (RPZ).
-* Improved hardware scalability by using multiple threads to listen for
-  queries and using finer-grained client locking
-* The `also-notify` option now takes the same syntax as `masters`, so it
-  can used named masterlists and TSIG keys.
-* `dnssec-signzone -D` writes an output file containing only DNSSEC data,
-  which can be included by the primary zone file.
-* `dnssec-signzone -R` forces removal of signatures that are not expired
-  but were created by a key which no longer exists.
-* `dnssec-signzone -X` allows a separate expiration date to be specified
-  for DNSKEY signatures from other signatures.
-* New `-L` option to `dnssec-keygen`, `dnssec-settime`, and
-  `dnssec-keyfromlabel` sets the default TTL for the key.
-* `dnssec-dsfromkey` now supports reading from standard input, to make it
-  easier to convert DNSKEY to DS.
-* RFC 1918 reverse zones have been added to the empty-zones table per RFC
-  6303.
-* Dynamic updates can now optionally set the zone's SOA serial number to
-  the current UNIX time.
-* DLZ modules can now retrieve the source IP address of the querying
-  client.
-* `request-ixfr` option can now be set at the per-zone level.
-* `dig +rrcomments` turns on comments about DNSKEY records, indicating
-  their key ID, algorithm and function
-* Simplified nsupdate syntax and added readline support
-
-#### BIND 9.9.1
-
-BIND 9.9.1 is a maintenance release.
-
-#### BIND 9.9.2
-
-BIND 9.9.2 is a maintenance release, and addresses the security flaw
-described in CVE-2012-4244.
-
-#### BIND 9.9.3
-
-BIND 9.9.3 is a maintenance release and addresses the security
-flaws described in CVE-2012-5688, CVE-2012-5689 and CVE-2013-2266.
-
-#### BIND 9.9.4
-
-BIND 9.9.4 is a maintenance release, and addresses the security
-flaws described in CVE-2013-3919 and CVE-2013-4854. It also
-introduces DNS Response Rate Limiting (DNS RRL) as a
-compile-time option. To use this feature, configure with
-the `--enable-rrl` option.
-
-#### BIND 9.9.5
-
-BIND 9.9.5 is a maintenance release, and addresses the security
-flaws described in CVE-2013-6320 and CVE-2014-0591.  It also
-includes the following functional enhancements:
-
-* `named` now preserves the capitalization of names when responding to
-  queries.
-* new `dnssec-importkey` command allows the use of offline DNSSEC keys with
-  automatic DNSKEY management.
-* When re-signing a zone, the new `dnssec-signzone -Q` option drops
-  signatures from keys that are still published but are no longer active.
-* `named-checkconf -px` will print the contents of configuration files with
-  the shared secrets obscured, making it easier to share configuration
-  (e.g. when submitting a bug report) without revealing private
-  information.
-
-#### BIND 9.9.6
-
-BIND 9.9.6 is a maintenance release, and also includes the following new
-functionality.
-
-- The former behavior with respect to capitalization of names (prior to
-  BIND 9.9.5) can be restored for specific clients via the new
-  `no-case-compress` ACL.
-
-#### BIND 9.9.7
-
-BIND 9.9.7 is a maintenance release, and addresses the security flaws
-described in CVE-2014-8500 and CVE-2015-1349.
-
-#### BIND 9.9.8
-
-BIND 9.9.8 is a maintenance release, and addresses the security flaws
-described in CVE-2015-4620, CVE-2015-5477, CVE-2015-5722, and
-CVE-2015-5986.
-
-It also makes the following new features available via a compile-time
-option:
-
-* New "fetchlimit" quotas are now available for the use of
-  recursive resolvers that are are under high query load for
-  domains whose authoritative servers are nonresponsive or are
-  experiencing a denial of service attack.
-    * `fetches-per-server` limits the number of simultaneous queries that
-      can be sent to any single authoritative server.  The configured value
-      is a starting point; it is automatically adjusted downward if the
-      server is partially or completely non-responsive. The algorithm used
-      to adjust the quota can be configured via the `fetch-quota-params`
-      option.
-    * `fetches-per-zone` limits the number of simultaneous queries that can
-      be sent for names within a single domain.  (Note: Unlike
-      `fetches-per-server`, this value is not self-tuning.)
-    * New stats counters have been added to count queries spilled due to
-      these quotas.
-  NOTE: These options are NOT built in by default; use
-  `configure --enable-fetchlimit` to enable them.
-
-#### BIND 9.9.9
-
-BIND 9.9.9 is a maintenance release and addresses bugs found
-in BIND 9.9.8 and earlier, as well as the security flaws
-described in CVE-2015-8000, CVE-2015-8461, CVE-2015-8704,
-CVE-2016-1285, CVE-2016-1286, CVE-2016-2775 and CVE-2016-2776.
-
-#### BIND 9.9.10
-	
-BIND 9.9.10 is a maintenance release and addresses the security
-flaws disclosed in CVE-2016-2775, CVE-2016-2776, CVE-2016-6170,
-CVE-2016-8864, CVE-2016-9131, CVE-2016-9147, CVE-2016-9444,
-CVE-2017-3135, CVE-2017-3136, CVE-2017-3137, and CVE-2017-3138.
-
-#### BIND 9.9.11
-
-BIND 9.9.11 is a maintenance release, and addresses the security flaws
-disclosed in CVE-2017-3140, CVE-2017-3141, CVE-2017-3142 and CVE-2017-3143.
-
-#### BIND 9.9.12
-
-BIND 9.9.12 is a maintenance release, and addresses the security flaw
-disclosed in CVE-2017-3145.
-
-#### BIND 9.9.13
-
-BIND 9.9.13 is a maintenance release, and addresses the security flaw
-disclosed in CVE-2018-5738.
-
-### <a name="build"/> Building BIND
-
-BIND requires a UNIX or Linux system with an ANSI C compiler, basic POSIX
-support, and a 64-bit integer type. Successful builds have been observed on
-many versions of Linux and UNIX, including RedHat, Fedora, Debian, Ubuntu,
-SuSE, Slackware, FreeBSD, NetBSD, OpenBSD, Mac OS X, Solaris, HP-UX, AIX,
-SCO OpenServer, and OpenWRT. 
-
-BIND is also available for Windows XP, 2003, 2008, and higher.  See
-`win32utils/readme1st.txt` for details on building for Windows systems.
-
-To build on a UNIX or Linux system, use:
-
-		$ ./configure
-		$ make
-
-If you're planning on making changes to the BIND 9 source, you should run
-`make depend`.  If you're using Emacs, you might find `make tags` helpful.
-
-Several environment variables that can be set before running `configure` will
-affect compilation:
-
-|Variable|Description |
-|--------------------|-----------------------------------------------|
-|`CC`|The C compiler to use.  `configure` tries to figure out the right one for supported systems.|
-|`CFLAGS`|C compiler flags.  Defaults to include -g and/or -O2 as supported by the compiler.  Please include '-g' if you need to set `CFLAGS`. |
-|`STD_CINCLUDES`|System header file directories.  Can be used to specify where add-on thread or IPv6 support is, for example.  Defaults to empty string.|
-|`STD_CDEFINES`|Any additional preprocessor symbols you want defined.  Defaults to empty string. For a list of possible settings, see the file [OPTIONS](OPTIONS.md).|
-|`LDFLAGS`|Linker flags. Defaults to empty string.|
-|`BUILD_CC`|Needed when cross-compiling: the native C compiler to use when building for the target system.|
-|`BUILD_CFLAGS`|Optional, used for cross-compiling|
-|`BUILD_CPPFLAGS`||
-|`BUILD_LDFLAGS`||
-|`BUILD_LIBS`||
-
-#### <a name="macos"> macOS
-
-Building on macOS assumes that the "Command Tools for Xcode" is installed.
-This can be downloaded from https://developer.apple.com/download/more/
-or if you have Xcode already installed you can run "xcode-select --install".
-This will add /usr/include to the system and install the compiler and other
-tools so that they can be easily found.
-
-
-#### <a name="opts"/> Compile-time options
-
-To see a full list of configuration options, run `configure --help`.
-
-On most platforms, BIND 9 is built with multithreading support, allowing it
-to take advantage of multiple CPUs.  You can configure this by specifying
-`--enable-threads` or `--disable-threads` on the `configure` command line.
-The default is to enable threads, except on some older operating systems on
-which threads are known to have had problems in the past.  (Note: Prior to
-BIND 9.10, the default was to disable threads on Linux systems; this has
-now been reversed.  On Linux systems, the threaded build is known to change
-BIND's behavior with respect to file permissions; it may be necessary to
-specify a user with the -u option when running `named`.)
-
-To build shared libraries, specify `--with-libtool` on the `configure`
-command line.
-
-Certain compiled-in constants and default settings can be increased to
-values better suited to large servers with abundant memory resources (e.g,
-64-bit servers with 12G or more of memory) by specifying
-`--with-tuning=large` on the `configure` command line. This can improve
-performance on big servers, but will consume more memory and may degrade
-performance on smaller systems.
-
-For the server to support DNSSEC, you need to build it with crypto support.
-To use OpenSSL, you should have OpenSSL 1.0.2e or newer installed.  If the
-OpenSSL library is installed in a nonstandard location, specify the prefix
-using "--with-openssl=&lt;PREFIX&gt;" on the configure command line. To use a
-PKCS#11 hardware service module for cryptographic operations, specify the
-path to the PKCS#11 provider library using "--with-pkcs11=&lt;PREFIX&gt;", and
-configure BIND with "--enable-native-pkcs11".
-
-To support the HTTP statistics channel, the server must be linked with
-libxml2 [http://xmlsoft.org](http://xmlsoft.org) If this is installed at a
-nonstandard location, specify the prefix using `--with-libxml2=/prefix`.
-
-Portions of BIND that are written in Python, including
-`dnssec-coverage`, `dnssec-checkds`, and some of the
-system tests, require the 'argparse' module to be available.
-'argparse' is a standard module as of Python 2.7 and Python 3.2.
-
-On some platforms it is necessary to explicitly request large file support
-to handle files bigger than 2GB.  This can be done by using
-`--enable-largefile` on the `configure` command line.
-
-Support for the "fixed" rrset-order option can be enabled or disabled by
-specifying `--enable-fixed-rrset` or `--disable-fixed-rrset` on the
-configure command line.  By default, fixed rrset-order is disabled to
-reduce memory footprint.
-
-If your operating system has integrated support for IPv6, it will be used
-automatically.  If you have installed KAME IPv6 separately, use
-`--with-kame[=PATH]` to specify its location.
-
-`make install` will install `named` and the various BIND 9 libraries.  By
-default, installation is into /usr/local, but this can be changed with the
-`--prefix` option when running `configure`.
-
-You may specify the option `--sysconfdir` to set the directory where
-configuration files like `named.conf` go by default, and `--localstatedir`
-to set the default parent directory of `run/named.pid`.   For backwards
-compatibility with BIND 8, `--sysconfdir` defaults to `/etc` and
-`--localstatedir` defaults to `/var` if no `--prefix` option is given.  If
-there is a `--prefix` option, sysconfdir defaults to `$prefix/etc` and
-localstatedir defaults to `$prefix/var`.
-
-### <a name="testing"/> Automated testing
-
-A system test suite can be run with `make test`.  The system tests require
-you to configure a set of virtual IP addresses on your system (this allows
-multiple servers to run locally and communicate with one another).  These
-IP addresses can be configured by running the command
-`bin/tests/system/ifconfig.sh up` as root.
-
-Some tests require Perl and the Net::DNS and/or IO::Socket::INET6 modules,
-and will be skipped if these are not available. Some tests require Python
-and the 'dnspython' module and will be skipped if these are not available.
-See bin/tests/system/README for further details.
-
-Unit tests are implemented using Automated Testing Framework (ATF).
-To run them, use `configure --with-atf`, then run `make test` or
-`make unit`.
-
-### <a name="doc"/> Documentation
-
-The *BIND 9 Administrator Reference Manual* is included with the source
-distribution, in DocBook XML, HTML and PDF format, in the `doc/arm`
-directory.
-
-Some of the programs in the BIND 9 distribution have man pages in their
-directories.  In particular, the command line options of `named` are
-documented in `bin/named/named.8`.
-
-Frequently (and not-so-frequently) asked questions and their answers
-can be found in the ISC Knowledge Base at
-[https://kb.isc.org](https://kb.isc.org).
-
-Additional information on various subjects can be found in other
-`README` files throughout the source tree.
-
-### <a name="changes"/> Change log
-
-A detailed list of all changes that have been made throughout the
-development BIND 9 is included in the file CHANGES, with the most recent
-changes listed first.  Change notes include tags indicating the category of
-the change that was made; these categories are:
-
-|Category	|Description	        			|
-|--------------	|-----------------------------------------------|
-| [func] | New feature |
-| [bug] | General bug fix |
-| [security] | Fix for a significant security flaw |
-| [experimental] | Used for new features when the syntax or other aspects of the design are still in flux and may change |
-| [port] | Portability enhancement |
-| [maint] | Updates to built-in data such as root server addresses and keys |
-| [tuning] | Changes to built-in configuration defaults and constants to improve performance |
-| [performance] | Other changes to improve server performance |
-| [protocol] | Updates to the DNS protocol such as new RR types |
-| [test] | Changes to the automatic tests, not affecting server functionality |
-| [cleanup] | Minor corrections and refactoring |
-| [doc] | Documentation |
-| [contrib] | Changes to the contributed tools and libraries in the 'contrib' subdirectory |
-| [placeholder] | Used in the master development branch to reserve change numbers for use in other branches, e.g. when fixing a bug that only exists in older releases |
-
-In general, [func] and [experimental] tags will only appear in new-feature
-releases (i.e., those with version numbers ending in zero).  Some new
-functionality may be backported to older releases on a case-by-case basis.
-All other change types may be applied to all currently-supported releases.
-
-### <a name="ack"/> Acknowledgments
-
-* The original development of BIND 9 was underwritten by the
-  following organizations:
-
-		Sun Microsystems, Inc.
-		Hewlett Packard
-		Compaq Computer Corporation
-		IBM
-		Process Software Corporation
-		Silicon Graphics, Inc.
-		Network Associates, Inc.
-		U.S. Defense Information Systems Agency
-		USENIX Association
-		Stichting NLnet - NLnet Foundation
-		Nominum, Inc.
-
-* This product includes software developed by the OpenSSL Project for use
-  in the OpenSSL Toolkit.
-  [http://www.OpenSSL.org/](http://www.OpenSSL.org/)
-* This product includes cryptographic software written by Eric Young
-  (eay@cryptsoft.com)
-* This product includes software written by Tim Hudson (tjh@cryptsoft.com)

acconfig.h

@@ -1,20 +1,21 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2001, 2003  Internet Software Consortium.
  *
- * Permission to use, copy, modify, and/or distribute this software for any
+ * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ * DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-/*! \file */
+/* $Id: acconfig.h,v 1.35.2.5 2003/08/05 00:42:53 marka Exp $ */
 
 /***
  *** This file is not to be included by any public header files, because
@@ -22,88 +23,97 @@
  ***/
 @TOP@
 
-/** define on DEC OSF to enable 4.4BSD style sa_len support */
+/* define to `int' if <sys/types.h> doesn't define.  */
+#undef ssize_t
+
+/* define on DEC OSF to enable 4.4BSD style sa_len support */
 #undef _SOCKADDR_LEN
 
-/** define if your system needs pthread_init() before using pthreads */
+/* define if your system needs pthread_init() before using pthreads */
 #undef NEED_PTHREAD_INIT
 
-/** define if your system has sigwait() */
+/* define if your system has sigwait() */
 #undef HAVE_SIGWAIT
 
-/** define if sigwait() is the UnixWare flavor */
+/* define if sigwait() is the UnixWare flavor */
 #undef HAVE_UNIXWARE_SIGWAIT
 
-/** define on Solaris to get sigwait() to work using pthreads semantics */
+/* define on Solaris to get sigwait() to work using pthreads semantics */
 #undef _POSIX_PTHREAD_SEMANTICS
 
-/** define if LinuxThreads is in use */
+/* define if LinuxThreads is in use */
 #undef HAVE_LINUXTHREADS
 
-/** define if sysconf() is available */
+/* define if sysconf() is available */
 #undef HAVE_SYSCONF
 
-/** define if sysctlbyname() is available */
+/* define if sysctlbyname() is available */
 #undef HAVE_SYSCTLBYNAME
 
-/** define if catgets() is available */
+/* define if catgets() is available */
 #undef HAVE_CATGETS
 
-/** define if getifaddrs() exists */
-#undef HAVE_GETIFADDRS
-
-/** define if you have the NET_RT_IFLIST sysctl variable and sys/sysctl.h */
+/* define if you have the NET_RT_IFLIST sysctl variable and sys/sysctl.h */
 #undef HAVE_IFLIST_SYSCTL
 
-/** define if tzset() is available */
-#undef HAVE_TZSET
+/* define if you need to #define _XPG4_2 before including sys/socket.h */
+#undef NEED_XPG4_2_BEFORE_SOCKET_H
 
-/** define if struct addrinfo exists */
+/* define if you need to #define _XOPEN_SOURCE_ENTENDED before including
+ * sys/socket.h
+ */
+#undef NEED_XSE_BEFORE_SOCKET_H
+
+/* define if chroot() is available */
+#undef HAVE_CHROOT
+
+/* define if struct addrinfo exists */
 #undef HAVE_ADDRINFO
 
-/** define if getaddrinfo() exists */
+/* define if getaddrinfo() exists */
 #undef HAVE_GETADDRINFO
 
-/** define if gai_strerror() exists */
+/* define if gai_strerror() exists */
 #undef HAVE_GAISTRERROR
 
-/**
- * define if pthread_setconcurrency() should be called to tell the
+/* define if arc4random() exists */
+#undef HAVE_ARC4RANDOM
+
+/* define if pthread_setconcurrency() should be called to tell the
  * OS how many threads we might want to run.
  */
 #undef CALL_PTHREAD_SETCONCURRENCY
 
-/** define if IPv6 is not disabled */
+/* define if IPv6 is not disabled */
 #undef WANT_IPV6
 
-/** define if flockfile() is available */
+/* define if flockfile() is available */
 #undef HAVE_FLOCKFILE
 
-/** define if getc_unlocked() is available */
+/* define if getc_unlocked() is available */
 #undef HAVE_GETCUNLOCKED
 
-/** Shut up warnings about sputaux in stdio.h on BSD/OS pre-4.1 */
+/* Shut up warnings about sputaux in stdio.h on BSD/OS pre-4.1 */
 #undef SHUTUP_SPUTAUX
 #ifdef SHUTUP_SPUTAUX
 struct __sFILE;
 extern __inline int __sputaux(int _c, struct __sFILE *_p);
 #endif
 
-/** Shut up warnings about missing sigwait prototype on BSD/OS 4.0* */
+/* Shut up warnings about missing sigwait prototype on BSD/OS 4.0* */
 #undef SHUTUP_SIGWAIT
 #ifdef SHUTUP_SIGWAIT
 int sigwait(const unsigned int *set, int *sig);
 #endif
 
-/** Shut up warnings from gcc -Wcast-qual on BSD/OS 4.1. */
+/* Shut up warnings from gcc -Wcast-qual on BSD/OS 4.1. */
 #undef SHUTUP_STDARG_CAST
 #if defined(SHUTUP_STDARG_CAST) && defined(__GNUC__)
-#include <stdarg.h>		/** Grr.  Must be included *every time*. */
-/**
+#include <stdarg.h>		/* Grr.  Must be included *every time*. */
+/*
  * The silly continuation line is to keep configure from
  * commenting out the #undef.
  */
-
 #undef \
 	va_start
 #define	va_start(ap, last) \
@@ -112,34 +122,16 @@ int sigwait(const unsigned int *set, int *sig);
 		_u.konst = &(last); \
 		ap = (va_list)(_u.var + __va_words(__typeof(last))); \
 	} while (0)
-#endif /** SHUTUP_STDARG_CAST && __GNUC__ */
+#endif /* SHUTUP_STDARG_CAST && __GNUC__ */
 
-/** define if the system has a random number generating device */
+/* define if the system has a random number generating device */
 #undef PATH_RANDOMDEV
 
-/** define if pthread_attr_getstacksize() is available */
+/* define if pthread_attr_getstacksize() is available */
 #undef HAVE_PTHREAD_ATTR_GETSTACKSIZE
 
-/** define if pthread_attr_setstacksize() is available */
+/* define if pthread_attr_setstacksize() is available */
 #undef HAVE_PTHREAD_ATTR_SETSTACKSIZE
 
-/** define if you have strerror in the C library. */
+/* define if you have strerror in the C library. */
 #undef HAVE_STRERROR
-
-/** Define if you are running under Compaq TruCluster. */
-#undef HAVE_TRUCLUSTER
-
-/* Define if OpenSSL includes DSA support */
-#undef HAVE_OPENSSL_DSA
-
-/* Define if OpenSSL includes ECDSA support */
-#undef HAVE_OPENSSL_ECDSA
-
-/* Define to the length type used by the socket API (socklen_t, size_t, int). */
-#undef ISC_SOCKADDR_LEN_T
-
-/* Define if threads need PTHREAD_SCOPE_SYSTEM */
-#undef NEED_PTHREAD_SCOPE_SYSTEM
-
-/* Define to 1 if you have the uname library function. */
-#undef HAVE_UNAME

aclocal.m4

@@ -1,17 +1,2 @@
-sinclude(libtool.m4/libtool.m4)dnl
-sinclude(libtool.m4/ltoptions.m4)dnl
-sinclude(libtool.m4/ltsugar.m4)dnl
-sinclude(libtool.m4/ltversion.m4)dnl
-sinclude(libtool.m4/lt~obsolete.m4)dnl
+sinclude(./libtool.m4)dnl
 
-m4_divert_text(HELP_CANON, [[
-  NOTE: If PREFIX is not set, then the default values for --sysconfdir
-  and --localstatedir are /etc and /var, respectively.]])
-m4_divert_text(HELP_END, [[
-Professional support for BIND is provided by Internet Systems Consortium,
-Inc.  Information about paid support and training options is available at
-https://www.isc.org/support.
-
-Help can also often be found on the BIND Users mailing list
-(https://lists.isc.org/mailman/listinfo/bind-users) or in the #bind
-channel of the Freenode IRC service.]])

bin/Makefile.in

@@ -1,23 +1,25 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 1998-2001  Internet Software Consortium.
 #
-# Permission to use, copy, modify, and/or distribute this software for any
+# Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
 # copyright notice and this permission notice appear in all copies.
 #
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+# DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+# INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+# $Id: Makefile.in,v 1.22 2001/01/09 21:39:05 bwelling Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-SUBDIRS =	named rndc dig dnssec tools tests nsupdate \
-		check confgen @PYTHON_TOOLS@ @PKCS11_TOOLS@ tests
+SUBDIRS =	named rndc dig dnssec tests nsupdate check
 TARGETS =
 
 @BIND9_MAKE_RULES@

bin/check/.cvsignore

@@ -0,0 +1,6 @@
+Makefile
+.libs
+*.la
+*.lo
+named-checkconf
+named-checkzone

bin/check/.gitignore

@@ -1,3 +0,0 @@
-.libs
-named-checkconf
-named-checkzone

bin/check/Makefile.in

@@ -1,51 +1,47 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2000-2002  Internet Software Consortium.
 #
-# Permission to use, copy, modify, and/or distribute this software for any
+# Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
 # copyright notice and this permission notice appear in all copies.
 #
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+# DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+# INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-# $Id: Makefile.in,v 1.36 2009/12/05 23:31:40 each Exp $
+# $Id: Makefile.in,v 1.15.2.3 2002/02/12 06:05:50 marka Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
-@BIND9_MAKE_INCLUDES@
+@BIND9_INCLUDES@
 
-CINCLUDES =	${BIND9_INCLUDES} ${DNS_INCLUDES} ${ISCCFG_INCLUDES} \
-		${ISC_INCLUDES}
+CINCLUDES =	${DNS_INCLUDES} ${ISCCFG_INCLUDES} ${ISC_INCLUDES}
 
 CDEFINES = 	-DNAMED_CONFFILE=\"${sysconfdir}/named.conf\"
 CWARNINGS =
 
-DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
+DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_OPENSSL_LIBS@ @DNS_GSSAPI_LIBS@
 ISCCFGLIBS =	../../lib/isccfg/libisccfg.@A@
 ISCLIBS =	../../lib/isc/libisc.@A@
-ISCNOSYMLIBS =	../../lib/isc/libisc-nosymtbl.@A@
-BIND9LIBS =	../../lib/bind9/libbind9.@A@
 
 DNSDEPLIBS =	../../lib/dns/libdns.@A@
 ISCCFGDEPLIBS =	../../lib/isccfg/libisccfg.@A@
 ISCDEPLIBS =	../../lib/isc/libisc.@A@
-BIND9DEPLIBS =	../../lib/bind9/libbind9.@A@
 
-LIBS =		${ISCLIBS} @LIBS@
-NOSYMLIBS =	${ISCNOSYMLIBS} @LIBS@
+LIBS =		@LIBS@
 
 SUBDIRS =
 
 # Alphabetically
-TARGETS =	named-checkconf@EXEEXT@ named-checkzone@EXEEXT@
+TARGETS =	named-checkconf named-checkzone
 
 # Alphabetically
 SRCS =		named-checkconf.c named-checkzone.c check-tool.c
@@ -59,25 +55,21 @@ MANOBJS =	${MANPAGES} ${HTMLPAGES}
 @BIND9_MAKE_RULES@
 
 named-checkconf.@O@: named-checkconf.c
-	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} \
-		-DVERSION=\"${VERSION}\" \
+	${LIBTOOL} ${CC} ${ALL_CFLAGS} -DVERSION=\"${VERSION}\" \
 		-c ${srcdir}/named-checkconf.c
 
 named-checkzone.@O@: named-checkzone.c
-	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} \
-		-DVERSION=\"${VERSION}\" \
+	${LIBTOOL} ${CC} ${ALL_CFLAGS} -DVERSION=\"${VERSION}\" \
 		-c ${srcdir}/named-checkzone.c
 
-named-checkconf@EXEEXT@: named-checkconf.@O@ check-tool.@O@ ${ISCDEPLIBS} \
-		${DNSDEPLIBS} ${ISCCFGDEPLIBS} ${BIND9DEPLIBS}
-	export BASEOBJS="named-checkconf.@O@ check-tool.@O@"; \
-	export LIBS0="${BIND9LIBS} ${ISCCFGLIBS} ${DNSLIBS}"; \
-	${FINALBUILDCMD}
+named-checkconf: named-checkconf.@O@ check-tool.@O@ ${ISCDEPLIBS} \
+		 ${ISCCFGDEPLIBS} ${DNSDEPLIBS}
+	${LIBTOOL} ${PURIFY} ${CC} ${CFLAGS} -o $@ named-checkconf.@O@ \
+	check-tool.@O@ ${ISCCFGLIBS} ${DNSLIBS} ${ISCLIBS} ${LIBS}
 
-named-checkzone@EXEEXT@: named-checkzone.@O@ check-tool.@O@ ${ISCDEPLIBS} ${DNSDEPLIBS}
-	export BASEOBJS="named-checkzone.@O@ check-tool.@O@"; \
-	export LIBS0="${ISCCFGLIBS} ${DNSLIBS}"; \
-	${FINALBUILDCMD}
+named-checkzone: named-checkzone.@O@ check-tool.@O@ ${ISCDEPLIBS} ${DNSDEPLIBS}
+	${LIBTOOL} ${PURIFY} ${CC} ${CFLAGS} -o $@ named-checkzone.@O@ \
+	check-tool.@O@ ${DNSLIBS} ${ISCLIBS} ${LIBS}
 
 doc man:: ${MANOBJS}
 
@@ -88,19 +80,10 @@ installdirs:
 	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${sbindir}
 	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man8
 
-install:: named-checkconf@EXEEXT@ named-checkzone@EXEEXT@ installdirs
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} named-checkconf@EXEEXT@ ${DESTDIR}${sbindir}
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} named-checkzone@EXEEXT@ ${DESTDIR}${sbindir}
-	(cd ${DESTDIR}${sbindir}; rm -f named-compilezone@EXEEXT@; ${LINK_PROGRAM} named-checkzone@EXEEXT@ named-compilezone@EXEEXT@)
+install:: named-checkconf named-checkzone installdirs
+	${LIBTOOL} ${INSTALL_PROGRAM} named-checkconf ${DESTDIR}${sbindir}
+	${LIBTOOL} ${INSTALL_PROGRAM} named-checkzone ${DESTDIR}${sbindir}
 	for m in ${MANPAGES}; do ${INSTALL_DATA} ${srcdir}/$$m ${DESTDIR}${mandir}/man8; done
-	(cd ${DESTDIR}${mandir}/man8; rm -f named-compilezone.8; ${LINK_PROGRAM} named-checkzone.8 named-compilezone.8)
-
-uninstall::
-	rm -f ${DESTDIR}${mandir}/man8/named-compilezone.8
-	for m in ${MANPAGES}; do rm -f ${DESTDIR}${mandir}/man8/$$m ; done
-	rm -f ${DESTDIR}${sbindir}/named-compilezone@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkconf@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkzone@EXEEXT@
 
 clean distclean::
 	rm -f ${TARGETS} r1.htm

bin/check/check-tool.c

@@ -1,570 +1,42 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2000, 2001  Internet Software Consortium.
  *
- * Permission to use, copy, modify, and/or distribute this software for any
+ * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ * DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: check-tool.c,v 1.44 2011/12/22 07:32:39 each Exp $ */
-
-/*! \file */
+/* $Id: check-tool.c,v 1.4 2001/03/03 23:11:33 bwelling Exp $ */
 
 #include <config.h>
 
 #include <stdio.h>
 
-#ifdef _WIN32
-#include <Winsock2.h>
-#endif
-
 #include "check-tool.h"
-#include <isc/buffer.h>
-#include <isc/log.h>
-#include <isc/mem.h>
-#include <isc/netdb.h>
-#include <isc/net.h>
-#include <isc/print.h>
-#include <isc/region.h>
-#include <isc/stdio.h>
-#include <isc/string.h>
-#include <isc/symtab.h>
-#include <isc/types.h>
 #include <isc/util.h>
 
-#include <dns/fixedname.h>
-#include <dns/log.h>
-#include <dns/name.h>
-#include <dns/rdata.h>
-#include <dns/rdataclass.h>
-#include <dns/rdataset.h>
-#include <dns/types.h>
-#include <dns/zone.h>
-
-#include <isccfg/log.h>
-
-#ifndef CHECK_SIBLING
-#define CHECK_SIBLING 1
-#endif
-
-#ifndef CHECK_LOCAL
-#define CHECK_LOCAL 1
-#endif
-
-#ifdef HAVE_ADDRINFO
-#ifdef HAVE_GETADDRINFO
-#ifdef HAVE_GAISTRERROR
-#define USE_GETADDRINFO
-#endif
-#endif
-#endif
-
-#define CHECK(r) \
-	do { \
-		result = (r); \
-		if (result != ISC_R_SUCCESS) \
-			goto cleanup; \
-	} while (0)
-
-#define ERR_IS_CNAME 1
-#define ERR_NO_ADDRESSES 2
-#define ERR_LOOKUP_FAILURE 3
-#define ERR_EXTRA_A 4
-#define ERR_EXTRA_AAAA 5
-#define ERR_MISSING_GLUE 5
-#define ERR_IS_MXCNAME 6
-#define ERR_IS_SRVCNAME 7
-
-static const char *dbtype[] = { "rbt" };
-
-int debug = 0;
-isc_boolean_t nomerge = ISC_TRUE;
-#if CHECK_LOCAL
-isc_boolean_t docheckmx = ISC_TRUE;
-isc_boolean_t dochecksrv = ISC_TRUE;
-isc_boolean_t docheckns = ISC_TRUE;
-#else
-isc_boolean_t docheckmx = ISC_FALSE;
-isc_boolean_t dochecksrv = ISC_FALSE;
-isc_boolean_t docheckns = ISC_FALSE;
-#endif
-unsigned int zone_options = DNS_ZONEOPT_CHECKNS |
-			    DNS_ZONEOPT_CHECKMX |
-			    DNS_ZONEOPT_MANYERRORS |
-			    DNS_ZONEOPT_CHECKNAMES |
-			    DNS_ZONEOPT_CHECKINTEGRITY |
-#if CHECK_SIBLING
-			    DNS_ZONEOPT_CHECKSIBLING |
-#endif
-			    DNS_ZONEOPT_CHECKWILDCARD |
-			    DNS_ZONEOPT_WARNMXCNAME |
-			    DNS_ZONEOPT_WARNSRVCNAME;
-
-/*
- * This needs to match the list in bin/named/log.c.
- */
-static isc_logcategory_t categories[] = {
-	{ "",		     0 },
-	{ "client",	     0 },
-	{ "network",	     0 },
-	{ "update",	     0 },
-	{ "queries",	     0 },
-	{ "unmatched", 	     0 },
-	{ "update-security", 0 },
-	{ "query-errors",    0 },
-	{ NULL,		     0 }
-};
-
-static isc_symtab_t *symtab = NULL;
-static isc_mem_t *sym_mctx;
-
-static void
-freekey(char *key, unsigned int type, isc_symvalue_t value, void *userarg) {
-	UNUSED(type);
-	UNUSED(value);
-	isc_mem_free(userarg, key);
-}
-
-static void
-add(char *key, int value) {
-	isc_result_t result;
-	isc_symvalue_t symvalue;
-
-	if (sym_mctx == NULL) {
-		result = isc_mem_create(0, 0, &sym_mctx);
-		if (result != ISC_R_SUCCESS)
-			return;
-	}
-
-	if (symtab == NULL) {
-		result = isc_symtab_create(sym_mctx, 100, freekey, sym_mctx,
-					   ISC_FALSE, &symtab);
-		if (result != ISC_R_SUCCESS)
-			return;
-	}
-
-	key = isc_mem_strdup(sym_mctx, key);
-	if (key == NULL)
-		return;
-
-	symvalue.as_pointer = NULL;
-	result = isc_symtab_define(symtab, key, value, symvalue,
-				   isc_symexists_reject);
-	if (result != ISC_R_SUCCESS)
-		isc_mem_free(sym_mctx, key);
-}
-
-static isc_boolean_t
-logged(char *key, int value) {
-	isc_result_t result;
-
-	if (symtab == NULL)
-		return (ISC_FALSE);
-
-	result = isc_symtab_lookup(symtab, key, value, NULL);
-	if (result == ISC_R_SUCCESS)
-		return (ISC_TRUE);
-	return (ISC_FALSE);
-}
-
-static isc_boolean_t
-checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
-	dns_rdataset_t *a, dns_rdataset_t *aaaa)
-{
-#ifdef USE_GETADDRINFO
-	dns_rdataset_t *rdataset;
-	dns_rdata_t rdata = DNS_RDATA_INIT;
-	struct addrinfo hints, *ai, *cur;
-	char namebuf[DNS_NAME_FORMATSIZE + 1];
-	char ownerbuf[DNS_NAME_FORMATSIZE];
-	char addrbuf[sizeof("xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:123.123.123.123")];
-	isc_boolean_t answer = ISC_TRUE;
-	isc_boolean_t match;
-	const char *type;
-	void *ptr = NULL;
-	int result;
-
-	REQUIRE(a == NULL || !dns_rdataset_isassociated(a) ||
-		a->type == dns_rdatatype_a);
-	REQUIRE(aaaa == NULL || !dns_rdataset_isassociated(aaaa) ||
-		aaaa->type == dns_rdatatype_aaaa);
-
-	if (a == NULL || aaaa == NULL)
-		return (answer);
-
-	memset(&hints, 0, sizeof(hints));
-	hints.ai_flags = AI_CANONNAME;
-	hints.ai_family = PF_UNSPEC;
-	hints.ai_socktype = SOCK_STREAM;
-	hints.ai_protocol = IPPROTO_TCP;
-
-	dns_name_format(name, namebuf, sizeof(namebuf) - 1);
-	/*
-	 * Turn off search.
-	 */
-	if (dns_name_countlabels(name) > 1U) {
-		strlcat(namebuf, ".", sizeof(namebuf));
-	}
-	dns_name_format(owner, ownerbuf, sizeof(ownerbuf));
-
-	result = getaddrinfo(namebuf, NULL, &hints, &ai);
-	dns_name_format(name, namebuf, sizeof(namebuf) - 1);
-	switch (result) {
-	case 0:
-		/*
-		 * Work around broken getaddrinfo() implementations that
-		 * fail to set ai_canonname on first entry.
-		 */
-		cur = ai;
-		while (cur != NULL && cur->ai_canonname == NULL &&
-		       cur->ai_next != NULL)
-			cur = cur->ai_next;
-		if (cur != NULL && cur->ai_canonname != NULL &&
-		    strcasecmp(cur->ai_canonname, namebuf) != 0 &&
-		    !logged(namebuf, ERR_IS_CNAME)) {
-			dns_zone_log(zone, ISC_LOG_ERROR,
-				     "%s/NS '%s' (out of zone) "
-				     "is a CNAME '%s' (illegal)",
-				     ownerbuf, namebuf,
-				     cur->ai_canonname);
-			/* XXX950 make fatal for 9.5.0 */
-			/* answer = ISC_FALSE; */
-			add(namebuf, ERR_IS_CNAME);
-		}
-		break;
-	case EAI_NONAME:
-#if defined(EAI_NODATA) && (EAI_NODATA != EAI_NONAME)
-	case EAI_NODATA:
-#endif
-		if (!logged(namebuf, ERR_NO_ADDRESSES)) {
-			dns_zone_log(zone, ISC_LOG_ERROR,
-				     "%s/NS '%s' (out of zone) "
-				     "has no addresses records (A or AAAA)",
-				     ownerbuf, namebuf);
-			add(namebuf, ERR_NO_ADDRESSES);
-		}
-		/* XXX950 make fatal for 9.5.0 */
-		return (ISC_TRUE);
-
-	default:
-		if (!logged(namebuf, ERR_LOOKUP_FAILURE)) {
-			dns_zone_log(zone, ISC_LOG_WARNING,
-				     "getaddrinfo(%s) failed: %s",
-				     namebuf, gai_strerror(result));
-			add(namebuf, ERR_LOOKUP_FAILURE);
-		}
-		return (ISC_TRUE);
-	}
-
-	/*
-	 * Check that all glue records really exist.
-	 */
-	if (!dns_rdataset_isassociated(a))
-		goto checkaaaa;
-	result = dns_rdataset_first(a);
-	while (result == ISC_R_SUCCESS) {
-		dns_rdataset_current(a, &rdata);
-		match = ISC_FALSE;
-		for (cur = ai; cur != NULL; cur = cur->ai_next) {
-			if (cur->ai_family != AF_INET)
-				continue;
-			ptr = &((struct sockaddr_in *)(cur->ai_addr))->sin_addr;
-			if (memcmp(ptr, rdata.data, rdata.length) == 0) {
-				match = ISC_TRUE;
-				break;
-			}
-		}
-		if (!match && !logged(namebuf, ERR_EXTRA_A)) {
-			dns_zone_log(zone, ISC_LOG_ERROR, "%s/NS '%s' "
-				     "extra GLUE A record (%s)",
-				     ownerbuf, namebuf,
-				     inet_ntop(AF_INET, rdata.data,
-					       addrbuf, sizeof(addrbuf)));
-			add(namebuf, ERR_EXTRA_A);
-			/* XXX950 make fatal for 9.5.0 */
-			/* answer = ISC_FALSE; */
-		}
-		dns_rdata_reset(&rdata);
-		result = dns_rdataset_next(a);
-	}
-
- checkaaaa:
-	if (!dns_rdataset_isassociated(aaaa))
-		goto checkmissing;
-	result = dns_rdataset_first(aaaa);
-	while (result == ISC_R_SUCCESS) {
-		dns_rdataset_current(aaaa, &rdata);
-		match = ISC_FALSE;
-		for (cur = ai; cur != NULL; cur = cur->ai_next) {
-			if (cur->ai_family != AF_INET6)
-				continue;
-			ptr = &((struct sockaddr_in6 *)(cur->ai_addr))->sin6_addr;
-			if (memcmp(ptr, rdata.data, rdata.length) == 0) {
-				match = ISC_TRUE;
-				break;
-			}
-		}
-		if (!match && !logged(namebuf, ERR_EXTRA_AAAA)) {
-			dns_zone_log(zone, ISC_LOG_ERROR, "%s/NS '%s' "
-				     "extra GLUE AAAA record (%s)",
-				     ownerbuf, namebuf,
-				     inet_ntop(AF_INET6, rdata.data,
-					       addrbuf, sizeof(addrbuf)));
-			add(namebuf, ERR_EXTRA_AAAA);
-			/* XXX950 make fatal for 9.5.0. */
-			/* answer = ISC_FALSE; */
-		}
-		dns_rdata_reset(&rdata);
-		result = dns_rdataset_next(aaaa);
-	}
-
- checkmissing:
-	/*
-	 * Check that all addresses appear in the glue.
-	 */
-	if (!logged(namebuf, ERR_MISSING_GLUE)) {
-		isc_boolean_t missing_glue = ISC_FALSE;
-		for (cur = ai; cur != NULL; cur = cur->ai_next) {
-			switch (cur->ai_family) {
-			case AF_INET:
-				rdataset = a;
-				ptr = &((struct sockaddr_in *)(cur->ai_addr))->sin_addr;
-				type = "A";
-				break;
-			case AF_INET6:
-				rdataset = aaaa;
-				ptr = &((struct sockaddr_in6 *)(cur->ai_addr))->sin6_addr;
-				type = "AAAA";
-				break;
-			default:
-				 continue;
-			}
-			match = ISC_FALSE;
-			if (dns_rdataset_isassociated(rdataset))
-				result = dns_rdataset_first(rdataset);
-			else
-				result = ISC_R_FAILURE;
-			while (result == ISC_R_SUCCESS && !match) {
-				dns_rdataset_current(rdataset, &rdata);
-				if (memcmp(ptr, rdata.data, rdata.length) == 0)
-					match = ISC_TRUE;
-				dns_rdata_reset(&rdata);
-				result = dns_rdataset_next(rdataset);
-			}
-			if (!match) {
-				dns_zone_log(zone, ISC_LOG_ERROR, "%s/NS '%s' "
-					     "missing GLUE %s record (%s)",
-					     ownerbuf, namebuf, type,
-					     inet_ntop(cur->ai_family, ptr,
-						       addrbuf, sizeof(addrbuf)));
-				/* XXX950 make fatal for 9.5.0. */
-				/* answer = ISC_FALSE; */
-				missing_glue = ISC_TRUE;
-			}
-		}
-		if (missing_glue)
-			add(namebuf, ERR_MISSING_GLUE);
-	}
-	freeaddrinfo(ai);
-	return (answer);
-#else
-	return (ISC_TRUE);
-#endif
-}
-
-static isc_boolean_t
-checkmx(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner) {
-#ifdef USE_GETADDRINFO
-	struct addrinfo hints, *ai, *cur;
-	char namebuf[DNS_NAME_FORMATSIZE + 1];
-	char ownerbuf[DNS_NAME_FORMATSIZE];
-	int result;
-	int level = ISC_LOG_ERROR;
-	isc_boolean_t answer = ISC_TRUE;
-
-	memset(&hints, 0, sizeof(hints));
-	hints.ai_flags = AI_CANONNAME;
-	hints.ai_family = PF_UNSPEC;
-	hints.ai_socktype = SOCK_STREAM;
-	hints.ai_protocol = IPPROTO_TCP;
-
-	dns_name_format(name, namebuf, sizeof(namebuf) - 1);
-	/*
-	 * Turn off search.
-	 */
-	if (dns_name_countlabels(name) > 1U) {
-		strlcat(namebuf, ".", sizeof(namebuf));
-	}
-	dns_name_format(owner, ownerbuf, sizeof(ownerbuf));
-
-	result = getaddrinfo(namebuf, NULL, &hints, &ai);
-	dns_name_format(name, namebuf, sizeof(namebuf) - 1);
-	switch (result) {
-	case 0:
-		/*
-		 * Work around broken getaddrinfo() implementations that
-		 * fail to set ai_canonname on first entry.
-		 */
-		cur = ai;
-		while (cur != NULL && cur->ai_canonname == NULL &&
-		       cur->ai_next != NULL)
-			cur = cur->ai_next;
-		if (cur != NULL && cur->ai_canonname != NULL &&
-		    strcasecmp(cur->ai_canonname, namebuf) != 0) {
-			if ((zone_options & DNS_ZONEOPT_WARNMXCNAME) != 0)
-				level = ISC_LOG_WARNING;
-			if ((zone_options & DNS_ZONEOPT_IGNOREMXCNAME) == 0) {
-				if (!logged(namebuf, ERR_IS_MXCNAME)) {
-					dns_zone_log(zone, level,
-						     "%s/MX '%s' (out of zone)"
-						     " is a CNAME '%s' "
-						     "(illegal)",
-						     ownerbuf, namebuf,
-						     cur->ai_canonname);
-					add(namebuf, ERR_IS_MXCNAME);
-				}
-				if (level == ISC_LOG_ERROR)
-					answer = ISC_FALSE;
-			}
-		}
-		freeaddrinfo(ai);
-		return (answer);
-
-	case EAI_NONAME:
-#if defined(EAI_NODATA) && (EAI_NODATA != EAI_NONAME)
-	case EAI_NODATA:
-#endif
-		if (!logged(namebuf, ERR_NO_ADDRESSES)) {
-			dns_zone_log(zone, ISC_LOG_ERROR,
-				     "%s/MX '%s' (out of zone) "
-				     "has no addresses records (A or AAAA)",
-				     ownerbuf, namebuf);
-			add(namebuf, ERR_NO_ADDRESSES);
-		}
-		/* XXX950 make fatal for 9.5.0. */
-		return (ISC_TRUE);
-
-	default:
-		if (!logged(namebuf, ERR_LOOKUP_FAILURE)) {
-			dns_zone_log(zone, ISC_LOG_WARNING,
-			     "getaddrinfo(%s) failed: %s",
-			     namebuf, gai_strerror(result));
-			add(namebuf, ERR_LOOKUP_FAILURE);
-		}
-		return (ISC_TRUE);
-	}
-#else
-	return (ISC_TRUE);
-#endif
-}
-
-static isc_boolean_t
-checksrv(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner) {
-#ifdef USE_GETADDRINFO
-	struct addrinfo hints, *ai, *cur;
-	char namebuf[DNS_NAME_FORMATSIZE + 1];
-	char ownerbuf[DNS_NAME_FORMATSIZE];
-	int result;
-	int level = ISC_LOG_ERROR;
-	isc_boolean_t answer = ISC_TRUE;
-
-	memset(&hints, 0, sizeof(hints));
-	hints.ai_flags = AI_CANONNAME;
-	hints.ai_family = PF_UNSPEC;
-	hints.ai_socktype = SOCK_STREAM;
-	hints.ai_protocol = IPPROTO_TCP;
-
-	dns_name_format(name, namebuf, sizeof(namebuf) - 1);
-	/*
-	 * Turn off search.
-	 */
-	if (dns_name_countlabels(name) > 1U) {
-		strlcat(namebuf, ".", sizeof(namebuf));
-	}
-	dns_name_format(owner, ownerbuf, sizeof(ownerbuf));
-
-	result = getaddrinfo(namebuf, NULL, &hints, &ai);
-	dns_name_format(name, namebuf, sizeof(namebuf) - 1);
-	switch (result) {
-	case 0:
-		/*
-		 * Work around broken getaddrinfo() implementations that
-		 * fail to set ai_canonname on first entry.
-		 */
-		cur = ai;
-		while (cur != NULL && cur->ai_canonname == NULL &&
-		       cur->ai_next != NULL)
-			cur = cur->ai_next;
-		if (cur != NULL && cur->ai_canonname != NULL &&
-		    strcasecmp(cur->ai_canonname, namebuf) != 0) {
-			if ((zone_options & DNS_ZONEOPT_WARNSRVCNAME) != 0)
-				level = ISC_LOG_WARNING;
-			if ((zone_options & DNS_ZONEOPT_IGNORESRVCNAME) == 0) {
-				if (!logged(namebuf, ERR_IS_SRVCNAME)) {
-					dns_zone_log(zone, level, "%s/SRV '%s'"
-						     " (out of zone) is a "
-						     "CNAME '%s' (illegal)",
-						     ownerbuf, namebuf,
-						     cur->ai_canonname);
-					add(namebuf, ERR_IS_SRVCNAME);
-				}
-				if (level == ISC_LOG_ERROR)
-					answer = ISC_FALSE;
-			}
-		}
-		freeaddrinfo(ai);
-		return (answer);
-
-	case EAI_NONAME:
-#if defined(EAI_NODATA) && (EAI_NODATA != EAI_NONAME)
-	case EAI_NODATA:
-#endif
-		if (!logged(namebuf, ERR_NO_ADDRESSES)) {
-			dns_zone_log(zone, ISC_LOG_ERROR,
-				     "%s/SRV '%s' (out of zone) "
-				     "has no addresses records (A or AAAA)",
-				     ownerbuf, namebuf);
-			add(namebuf, ERR_NO_ADDRESSES);
-		}
-		/* XXX950 make fatal for 9.5.0. */
-		return (ISC_TRUE);
-
-	default:
-		if (!logged(namebuf, ERR_LOOKUP_FAILURE)) {
-			dns_zone_log(zone, ISC_LOG_WARNING,
-				     "getaddrinfo(%s) failed: %s",
-				     namebuf, gai_strerror(result));
-			add(namebuf, ERR_LOOKUP_FAILURE);
-		}
-		return (ISC_TRUE);
-	}
-#else
-	return (ISC_TRUE);
-#endif
-}
+#include <isc/log.h>
+#include <isc/types.h>
 
 isc_result_t
-setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp) {
+setup_logging(isc_mem_t *mctx, isc_log_t **logp) {
 	isc_logdestination_t destination;
 	isc_logconfig_t *logconfig = NULL;
 	isc_log_t *log = NULL;
 
 	RUNTIME_CHECK(isc_log_create(mctx, &log, &logconfig) == ISC_R_SUCCESS);
-	isc_log_registercategories(log, categories);
 	isc_log_setcontext(log);
-	dns_log_init(log);
-	dns_log_setcontext(log);
-	cfg_log_init(log);
 
-	destination.file.stream = errout;
+	destination.file.stream = stdout;
 	destination.file.name = NULL;
 	destination.file.versions = ISC_LOG_ROLLNEVER;
 	destination.file.maximum_size = 0;
@@ -578,123 +50,3 @@ setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp) {
 	*logp = log;
 	return (ISC_R_SUCCESS);
 }
-
-/*% load the zone */
-isc_result_t
-load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
-	  dns_masterformat_t fileformat, const char *classname,
-	  dns_zone_t **zonep)
-{
-	isc_result_t result;
-	dns_rdataclass_t rdclass;
-	isc_textregion_t region;
-	isc_buffer_t buffer;
-	dns_fixedname_t fixorigin;
-	dns_name_t *origin;
-	dns_zone_t *zone = NULL;
-
-	REQUIRE(zonep == NULL || *zonep == NULL);
-
-	if (debug)
-		fprintf(stderr, "loading \"%s\" from \"%s\" class \"%s\"\n",
-			zonename, filename, classname);
-
-	CHECK(dns_zone_create(&zone, mctx));
-
-	dns_zone_settype(zone, dns_zone_master);
-
-	isc_buffer_constinit(&buffer, zonename, strlen(zonename));
-	isc_buffer_add(&buffer, strlen(zonename));
-	dns_fixedname_init(&fixorigin);
-	origin = dns_fixedname_name(&fixorigin);
-	CHECK(dns_name_fromtext(origin, &buffer, dns_rootname, 0, NULL));
-	CHECK(dns_zone_setorigin(zone, origin));
-	CHECK(dns_zone_setdbtype(zone, 1, (const char * const *) dbtype));
-	CHECK(dns_zone_setfile2(zone, filename, fileformat));
-
-	DE_CONST(classname, region.base);
-	region.length = strlen(classname);
-	CHECK(dns_rdataclass_fromtext(&rdclass, &region));
-
-	dns_zone_setclass(zone, rdclass);
-	dns_zone_setoption(zone, zone_options, ISC_TRUE);
-	dns_zone_setoption(zone, DNS_ZONEOPT_NOMERGE, nomerge);
-	if (docheckmx)
-		dns_zone_setcheckmx(zone, checkmx);
-	if (docheckns)
-		dns_zone_setcheckns(zone, checkns);
-	if (dochecksrv)
-		dns_zone_setchecksrv(zone, checksrv);
-
-	CHECK(dns_zone_load(zone));
-	if (zonep != NULL) {
-		*zonep = zone;
-		zone = NULL;
-	}
-
- cleanup:
-	if (zone != NULL)
-		dns_zone_detach(&zone);
-	return (result);
-}
-
-/*% dump the zone */
-isc_result_t
-dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
-	  dns_masterformat_t fileformat, const dns_master_style_t *style,
-	  const isc_uint32_t rawversion)
-{
-	isc_result_t result;
-	FILE *output = stdout;
-	const char *flags;
-
-	flags = (fileformat == dns_masterformat_text) ? "w+" : "wb+";
-
-	if (debug) {
-		if (filename != NULL && strcmp(filename, "-") != 0)
-			fprintf(stderr, "dumping \"%s\" to \"%s\"\n",
-				zonename, filename);
-		else
-			fprintf(stderr, "dumping \"%s\"\n", zonename);
-	}
-
-	if (filename != NULL && strcmp(filename, "-") != 0) {
-		result = isc_stdio_open(filename, flags, &output);
-
-		if (result != ISC_R_SUCCESS) {
-			fprintf(stderr, "could not open output "
-				"file \"%s\" for writing\n", filename);
-			return (ISC_R_FAILURE);
-		}
-	}
-
-	result = dns_zone_dumptostream3(zone, output, fileformat, style,
-					rawversion);
-	if (output != stdout)
-		(void)isc_stdio_close(output);
-
-	return (result);
-}
-
-#ifdef _WIN32
-void
-InitSockets(void) {
-	WORD wVersionRequested;
-	WSADATA wsaData;
-	int err;
-
-	wVersionRequested = MAKEWORD(2, 0);
-
-	err = WSAStartup( wVersionRequested, &wsaData );
-	if (err != 0) {
-		fprintf(stderr, "WSAStartup() failed: %d\n", err);
-		exit(1);
-	}
-}
-
-void
-DestroySockets(void) {
-	WSACleanup();
-}
-#endif
-

bin/check/check-tool.h

@@ -1,59 +1,33 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2000, 2001  Internet Software Consortium.
  *
- * Permission to use, copy, modify, and/or distribute this software for any
+ * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ * DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: check-tool.h,v 1.18 2011/12/09 23:47:02 tbox Exp $ */
+/* $Id: check-tool.h,v 1.2 2001/01/09 21:39:09 bwelling Exp $ */
 
 #ifndef CHECK_TOOL_H
 #define CHECK_TOOL_H
 
-/*! \file */
-
 #include <isc/lang.h>
-#include <isc/stdio.h>
-#include <isc/types.h>
 
-#include <dns/masterdump.h>
-#include <dns/types.h>
+#include <isc/types.h>
 
 ISC_LANG_BEGINDECLS
 
 isc_result_t
-setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp);
-
-isc_result_t
-load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
-	  dns_masterformat_t fileformat, const char *classname,
-	  dns_zone_t **zonep);
-
-isc_result_t
-dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
-	  dns_masterformat_t fileformat, const dns_master_style_t *style,
-	  const isc_uint32_t rawversion);
-
-#ifdef _WIN32
-void InitSockets(void);
-void DestroySockets(void);
-#endif
-
-extern int debug;
-extern isc_boolean_t nomerge;
-extern isc_boolean_t docheckmx;
-extern isc_boolean_t docheckns;
-extern isc_boolean_t dochecksrv;
-extern unsigned int zone_options;
+setup_logging(isc_mem_t *mctx, isc_log_t **logp);
 
 ISC_LANG_ENDDECLS
 

bin/check/named-checkconf.8

@@ -1,143 +1,51 @@
-.\" Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
+.\"
+.\" Copyright (C) 2000, 2001  Internet Software Consortium.
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
 .\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.hy 0
-.ad l
-'\" t
-.\"     Title: named-checkconf
-.\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-01-10
-.\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+.\" DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+.\" INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+.\" FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+.\" NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+.\" WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.TH "NAMED\-CHECKCONF" "8" "2014\-01\-10" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
-.SH "NAME"
+.TH "NAMED-CHECKCONF" "8" "June 14, 2000" "BIND9" ""
+.SH NAME
 named-checkconf \- named configuration file syntax checking tool
-.SH "SYNOPSIS"
-.HP \w'\fBnamed\-checkconf\fR\ 'u
-\fBnamed\-checkconf\fR [\fB\-hjvz\fR] [\fB\-p\fR\ [\fB\-x\fR\ ]] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] {filename}
+.SH SYNOPSIS
+.sp
+\fBnamed-checkconf\fR [ \fB-v\fR ]  [ \fB-t \fIdirectory\fB\fR ]  \fBfilename\fR
 .SH "DESCRIPTION"
 .PP
-\fBnamed\-checkconf\fR
-checks the syntax, but not the semantics, of a
-\fBnamed\fR
-configuration file\&. The file is parsed and checked for syntax errors, along with all files included by it\&. If no file is specified,
-/etc/named\&.conf
-is read by default\&.
-.PP
-Note: files that
-\fBnamed\fR
-reads in separate parser contexts, such as
-rndc\&.key
-and
-bind\&.keys, are not automatically read by
-\fBnamed\-checkconf\fR\&. Configuration errors in these files may cause
-\fBnamed\fR
-to fail to run, even if
-\fBnamed\-checkconf\fR
-was successful\&.
-\fBnamed\-checkconf\fR
-can be run on these files explicitly, however\&.
+\fBnamed-checkconf\fR checks the syntax, but not
+the semantics, of a named configuration file.
 .SH "OPTIONS"
-.PP
-\-h
-.RS 4
-Print the usage summary and exit\&.
-.RE
-.PP
-\-j
-.RS 4
-When loading a zonefile read the journal if it exists\&.
-.RE
-.PP
-\-p
-.RS 4
-Print out the
-named\&.conf
-and included files in canonical form if no errors were detected\&. See also the
-\fB\-x\fR
-option\&.
-.RE
-.PP
-\-t \fIdirectory\fR
-.RS 4
-Chroot to
-directory
-so that include directives in the configuration file are processed as if run by a similarly chrooted
-\fBnamed\fR\&.
-.RE
-.PP
-\-v
-.RS 4
-Print the version of the
-\fBnamed\-checkconf\fR
-program and exit\&.
-.RE
-.PP
-\-x
-.RS 4
-When printing the configuration files in canonical form, obscure shared secrets by replacing them with strings of question marks (\*(Aq?\*(Aq)\&. This allows the contents of
-named\&.conf
-and related files to be shared \(em for example, when submitting bug reports \(em without compromising private data\&. This option cannot be used without
-\fB\-p\fR\&.
-.RE
-.PP
-\-z
-.RS 4
-Perform a test load of all master zones found in
-named\&.conf\&.
-.RE
-.PP
-filename
-.RS 4
-The name of the configuration file to be checked\&. If not specified, it defaults to
-/etc/named\&.conf\&.
-.RE
+.TP
+\fB-t \fIdirectory\fB\fR
+chroot to \fIdirectory\fR so that include
+directives in the configuration file are processed as if
+run by a similarly chrooted named.
+.TP
+\fB-v\fR
+Print the version of the \fBnamed-checkconf\fR
+program and exit.
+.TP
+\fBfilename\fR
+The name of the configuration file to be checked. If not
+specified, it defaults to \fI/etc/named.conf\fR.
 .SH "RETURN VALUES"
 .PP
-\fBnamed\-checkconf\fR
-returns an exit status of 1 if errors were detected and 0 otherwise\&.
+\fBnamed-checkconf\fR returns an exit status of 1 if
+errors were detected and 0 otherwise.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed-checkzone\fR(8),
-BIND 9 Administrator Reference Manual\&.
+\fIBIND 9 Administrator Reference Manual\fR.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
-.SH "COPYRIGHT"
-.br
-Copyright \(co 2000-2002, 2004, 2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.br
+Internet Software Consortium

bin/check/named-checkconf.c

@@ -1,22 +1,21 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2001  Internet Software Consortium.
  *
- * Permission to use, copy, modify, and/or distribute this software for any
+ * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ * DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: named-checkconf.c,v 1.56 2011/03/12 04:59:46 tbox Exp $ */
-
-/*! \file */
+/* $Id: named-checkconf.c,v 1.12 2001/07/27 17:45:26 gson Exp $ */
 
 #include <config.h>
 
@@ -26,57 +25,29 @@
 
 #include <isc/commandline.h>
 #include <isc/dir.h>
-#include <isc/entropy.h>
-#include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
-#include <isc/print.h>
 #include <isc/result.h>
 #include <isc/string.h>
 #include <isc/util.h>
 
-#include <isccfg/namedconf.h>
-
-#include <bind9/check.h>
-
-#include <dns/db.h>
-#include <dns/fixedname.h>
-#include <dns/log.h>
-#include <dns/name.h>
-#include <dns/rdataclass.h>
-#include <dns/result.h>
-#include <dns/rootns.h>
-#include <dns/zone.h>
+#include <isccfg/cfg.h>
+#include <isccfg/check.h>
 
 #include "check-tool.h"
 
-static const char *program = "named-checkconf";
-
 isc_log_t *logc = NULL;
 
-#define CHECK(r)\
-	do { \
-		result = (r); \
-		if (result != ISC_R_SUCCESS) \
-			goto cleanup; \
-	} while (0)
-
-/*% usage */
-ISC_PLATFORM_NORETURN_PRE static void
-usage(void) ISC_PLATFORM_NORETURN_POST;
-
 static void
 usage(void) {
-	fprintf(stderr, "usage: %s [-hjvz] [-p [-x]] [-t directory] "
-		"[named.conf]\n", program);
-	exit(1);
+        fprintf(stderr, "usage: named-checkconf [-v] [-t directory] [named.conf]\n");
+        exit(1);
 }
 
-/*% directory callback */
 static isc_result_t
-directory_callback(const char *clausename, const cfg_obj_t *obj, void *arg) {
+directory_callback(const char *clausename, cfg_obj_t *obj, void *arg) {
 	isc_result_t result;
-	const char *directory;
+	char *directory;
 
 	REQUIRE(strcasecmp("directory", clausename) == 0);
 
@@ -90,7 +61,7 @@ directory_callback(const char *clausename, const cfg_obj_t *obj, void *arg) {
 	result = isc_dir_chdir(directory);
 	if (result != ISC_R_SUCCESS) {
 		cfg_obj_log(obj, logc, ISC_LOG_ERROR,
-			    "change directory to '%s' failed: %s\n",
+			    "change directory to '%s' failed: %s",
 			    directory, isc_result_totext(result));
 		return (result);
 	}
@@ -98,401 +69,6 @@ directory_callback(const char *clausename, const cfg_obj_t *obj, void *arg) {
 	return (ISC_R_SUCCESS);
 }
 
-static isc_boolean_t
-get_maps(const cfg_obj_t **maps, const char *name, const cfg_obj_t **obj) {
-	int i;
-	for (i = 0;; i++) {
-		if (maps[i] == NULL)
-			return (ISC_FALSE);
-		if (cfg_map_get(maps[i], name, obj) == ISC_R_SUCCESS)
-			return (ISC_TRUE);
-	}
-}
-
-static isc_boolean_t
-get_checknames(const cfg_obj_t **maps, const cfg_obj_t **obj) {
-	const cfg_listelt_t *element;
-	const cfg_obj_t *checknames;
-	const cfg_obj_t *type;
-	const cfg_obj_t *value;
-	isc_result_t result;
-	int i;
-
-	for (i = 0;; i++) {
-		if (maps[i] == NULL)
-			return (ISC_FALSE);
-		checknames = NULL;
-		result = cfg_map_get(maps[i], "check-names", &checknames);
-		if (result != ISC_R_SUCCESS)
-			continue;
-		if (checknames != NULL && !cfg_obj_islist(checknames)) {
-			*obj = checknames;
-			return (ISC_TRUE);
-		}
-		for (element = cfg_list_first(checknames);
-		     element != NULL;
-		     element = cfg_list_next(element)) {
-			value = cfg_listelt_value(element);
-			type = cfg_tuple_get(value, "type");
-			if (strcasecmp(cfg_obj_asstring(type), "master") != 0)
-				continue;
-			*obj = cfg_tuple_get(value, "mode");
-			return (ISC_TRUE);
-		}
-	}
-}
-
-static isc_result_t
-configure_hint(const char *zfile, const char *zclass, isc_mem_t *mctx) {
-	isc_result_t result;
-	dns_db_t *db = NULL;
-	dns_rdataclass_t rdclass;
-	isc_textregion_t r;
-
-	if (zfile == NULL)
-		return (ISC_R_FAILURE);
-
-	DE_CONST(zclass, r.base);
-	r.length = strlen(zclass);
-	result = dns_rdataclass_fromtext(&rdclass, &r);
-	if (result != ISC_R_SUCCESS)
-		return (result);
-
-	result = dns_rootns_create(mctx, rdclass, zfile, &db);
-	if (result != ISC_R_SUCCESS)
-		return (result);
-
-	dns_db_detach(&db);
-	return (ISC_R_SUCCESS);
-}
-
-/*% configure the zone */
-static isc_result_t
-configure_zone(const char *vclass, const char *view,
-	       const cfg_obj_t *zconfig, const cfg_obj_t *vconfig,
-	       const cfg_obj_t *config, isc_mem_t *mctx)
-{
-	int i = 0;
-	isc_result_t result;
-	const char *zclass;
-	const char *zname;
-	const char *zfile = NULL;
-	const cfg_obj_t *maps[4];
-	const cfg_obj_t *mastersobj = NULL;
-	const cfg_obj_t *zoptions = NULL;
-	const cfg_obj_t *classobj = NULL;
-	const cfg_obj_t *typeobj = NULL;
-	const cfg_obj_t *fileobj = NULL;
-	const cfg_obj_t *dbobj = NULL;
-	const cfg_obj_t *obj = NULL;
-	const cfg_obj_t *fmtobj = NULL;
-	dns_masterformat_t masterformat;
-
-	zone_options = DNS_ZONEOPT_CHECKNS | DNS_ZONEOPT_MANYERRORS;
-
-	zname = cfg_obj_asstring(cfg_tuple_get(zconfig, "name"));
-	classobj = cfg_tuple_get(zconfig, "class");
-	if (!cfg_obj_isstring(classobj))
-		zclass = vclass;
-	else
-		zclass = cfg_obj_asstring(classobj);
-
-	zoptions = cfg_tuple_get(zconfig, "options");
-	maps[i++] = zoptions;
-	if (vconfig != NULL)
-		maps[i++] = cfg_tuple_get(vconfig, "options");
-	if (config != NULL) {
-		cfg_map_get(config, "options", &obj);
-		if (obj != NULL)
-			maps[i++] = obj;
-	}
-	maps[i] = NULL;
-
-	cfg_map_get(zoptions, "type", &typeobj);
-	if (typeobj == NULL)
-		return (ISC_R_FAILURE);
-
-	/*
-	 * Skip checks when using an alternate data source.
-	 */
-	cfg_map_get(zoptions, "database", &dbobj);
-	if (dbobj != NULL &&
-	    strcmp("rbt", cfg_obj_asstring(dbobj)) != 0 &&
-	    strcmp("rbt64", cfg_obj_asstring(dbobj)) != 0)
-		return (ISC_R_SUCCESS);
-
-	cfg_map_get(zoptions, "file", &fileobj);
-	if (fileobj != NULL)
-		zfile = cfg_obj_asstring(fileobj);
-
-	/*
-	 * Check hints files for hint zones.
-	 * Skip loading checks for any type other than
-	 * master and redirect
-	 */
-	if (strcasecmp(cfg_obj_asstring(typeobj), "hint") == 0)
-		return (configure_hint(zfile, zclass, mctx));
-	else if ((strcasecmp(cfg_obj_asstring(typeobj), "master") != 0) &&
-		  (strcasecmp(cfg_obj_asstring(typeobj), "redirect") != 0))
-		return (ISC_R_SUCCESS);
-
-	/*
-	 * Is the redirect zone configured as a slave?
-	 */
-	if (strcasecmp(cfg_obj_asstring(typeobj), "redirect") == 0) {
-		cfg_map_get(zoptions, "masters", &mastersobj);
-		if (mastersobj != NULL)
-			return (ISC_R_SUCCESS);
-	}
-
-	if (zfile == NULL)
-		return (ISC_R_FAILURE);
-
-	obj = NULL;
-	if (get_maps(maps, "check-dup-records", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-			zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "fail") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-			zone_options |= DNS_ZONEOPT_CHECKDUPRRFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options &= ~DNS_ZONEOPT_CHECKDUPRR;
-			zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-		zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-	}
-
-	obj = NULL;
-	if (get_maps(maps, "check-mx", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKMX;
-			zone_options &= ~DNS_ZONEOPT_CHECKMXFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "fail") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKMX;
-			zone_options |= DNS_ZONEOPT_CHECKMXFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options &= ~DNS_ZONEOPT_CHECKMX;
-			zone_options &= ~DNS_ZONEOPT_CHECKMXFAIL;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_CHECKMX;
-		zone_options &= ~DNS_ZONEOPT_CHECKMXFAIL;
-	}
-
-	obj = NULL;
-	if (get_maps(maps, "check-integrity", &obj)) {
-		if (cfg_obj_asboolean(obj))
-			zone_options |= DNS_ZONEOPT_CHECKINTEGRITY;
-		else
-			zone_options &= ~DNS_ZONEOPT_CHECKINTEGRITY;
-	} else
-		zone_options |= DNS_ZONEOPT_CHECKINTEGRITY;
-
-	obj = NULL;
-	if (get_maps(maps, "check-mx-cname", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_WARNMXCNAME;
-			zone_options &= ~DNS_ZONEOPT_IGNOREMXCNAME;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "fail") == 0) {
-			zone_options &= ~DNS_ZONEOPT_WARNMXCNAME;
-			zone_options &= ~DNS_ZONEOPT_IGNOREMXCNAME;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options |= DNS_ZONEOPT_WARNMXCNAME;
-			zone_options |= DNS_ZONEOPT_IGNOREMXCNAME;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_WARNMXCNAME;
-		zone_options &= ~DNS_ZONEOPT_IGNOREMXCNAME;
-	}
-
-	obj = NULL;
-	if (get_maps(maps, "check-srv-cname", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_WARNSRVCNAME;
-			zone_options &= ~DNS_ZONEOPT_IGNORESRVCNAME;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "fail") == 0) {
-			zone_options &= ~DNS_ZONEOPT_WARNSRVCNAME;
-			zone_options &= ~DNS_ZONEOPT_IGNORESRVCNAME;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options |= DNS_ZONEOPT_WARNSRVCNAME;
-			zone_options |= DNS_ZONEOPT_IGNORESRVCNAME;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_WARNSRVCNAME;
-		zone_options &= ~DNS_ZONEOPT_IGNORESRVCNAME;
-	}
-
-	obj = NULL;
-	if (get_maps(maps, "check-sibling", &obj)) {
-		if (cfg_obj_asboolean(obj))
-			zone_options |= DNS_ZONEOPT_CHECKSIBLING;
-		else
-			zone_options &= ~DNS_ZONEOPT_CHECKSIBLING;
-	}
-
-	obj = NULL;
-	if (get_maps(maps, "check-spf", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKSPF;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options &= ~DNS_ZONEOPT_CHECKSPF;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_CHECKSPF;
-	}
-
-	obj = NULL;
-	if (get_checknames(maps, &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKNAMES;
-			zone_options &= ~DNS_ZONEOPT_CHECKNAMESFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "fail") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKNAMES;
-			zone_options |= DNS_ZONEOPT_CHECKNAMESFAIL;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options &= ~DNS_ZONEOPT_CHECKNAMES;
-			zone_options &= ~DNS_ZONEOPT_CHECKNAMESFAIL;
-		} else
-			INSIST(0);
-	} else {
-	       zone_options |= DNS_ZONEOPT_CHECKNAMES;
-	       zone_options |= DNS_ZONEOPT_CHECKNAMESFAIL;
-	}
-
-	masterformat = dns_masterformat_text;
-	fmtobj = NULL;
-	if (get_maps(maps, "masterfile-format", &fmtobj)) {
-		const char *masterformatstr = cfg_obj_asstring(fmtobj);
-		if (strcasecmp(masterformatstr, "text") == 0)
-			masterformat = dns_masterformat_text;
-		else if (strcasecmp(masterformatstr, "raw") == 0)
-			masterformat = dns_masterformat_raw;
-		else
-			INSIST(0);
-	}
-
-	result = load_zone(mctx, zname, zfile, masterformat, zclass, NULL);
-	if (result != ISC_R_SUCCESS)
-		fprintf(stderr, "%s/%s/%s: %s\n", view, zname, zclass,
-			dns_result_totext(result));
-	return (result);
-}
-
-/*% configure a view */
-static isc_result_t
-configure_view(const char *vclass, const char *view, const cfg_obj_t *config,
-	       const cfg_obj_t *vconfig, isc_mem_t *mctx)
-{
-	const cfg_listelt_t *element;
-	const cfg_obj_t *voptions;
-	const cfg_obj_t *zonelist;
-	isc_result_t result = ISC_R_SUCCESS;
-	isc_result_t tresult;
-
-	voptions = NULL;
-	if (vconfig != NULL)
-		voptions = cfg_tuple_get(vconfig, "options");
-
-	zonelist = NULL;
-	if (voptions != NULL)
-		(void)cfg_map_get(voptions, "zone", &zonelist);
-	else
-		(void)cfg_map_get(config, "zone", &zonelist);
-
-	for (element = cfg_list_first(zonelist);
-	     element != NULL;
-	     element = cfg_list_next(element))
-	{
-		const cfg_obj_t *zconfig = cfg_listelt_value(element);
-		tresult = configure_zone(vclass, view, zconfig, vconfig,
-					 config, mctx);
-		if (tresult != ISC_R_SUCCESS)
-			result = tresult;
-	}
-	return (result);
-}
-
-static isc_result_t
-config_getclass(const cfg_obj_t *classobj, dns_rdataclass_t defclass,
-		dns_rdataclass_t *classp)
-{
-	isc_textregion_t r;
-
-	if (!cfg_obj_isstring(classobj)) {
-		*classp = defclass;
-		return (ISC_R_SUCCESS);
-	}
-	DE_CONST(cfg_obj_asstring(classobj), r.base);
-	r.length = strlen(r.base);
-	return (dns_rdataclass_fromtext(classp, &r));
-}
-
-/*% load zones from the configuration */
-static isc_result_t
-load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
-	const cfg_listelt_t *element;
-	const cfg_obj_t *views;
-	const cfg_obj_t *vconfig;
-	isc_result_t result = ISC_R_SUCCESS;
-	isc_result_t tresult;
-
-	views = NULL;
-
-	(void)cfg_map_get(config, "view", &views);
-	for (element = cfg_list_first(views);
-	     element != NULL;
-	     element = cfg_list_next(element))
-	{
-		const cfg_obj_t *classobj;
-		dns_rdataclass_t viewclass;
-		const char *vname;
-		char buf[sizeof("CLASS65535")];
-
-		vconfig = cfg_listelt_value(element);
-		if (vconfig == NULL)
-			continue;
-
-		classobj = cfg_tuple_get(vconfig, "class");
-		CHECK(config_getclass(classobj, dns_rdataclass_in,
-					 &viewclass));
-		if (dns_rdataclass_ismeta(viewclass))
-			CHECK(ISC_R_FAILURE);
-
-		dns_rdataclass_format(viewclass, buf, sizeof(buf));
-		vname = cfg_obj_asstring(cfg_tuple_get(vconfig, "name"));
-		tresult = configure_view(buf, vname, config, vconfig, mctx);
-		if (tresult != ISC_R_SUCCESS)
-			result = tresult;
-	}
-
-	if (views == NULL) {
-		tresult = configure_view("IN", "_default", config, NULL, mctx);
-		if (tresult != ISC_R_SUCCESS)
-			result = tresult;
-	}
-
-cleanup:
-	return (result);
-}
-
-static void
-output(void *closure, const char *text, int textlen) {
-	UNUSED(closure);
-	if (fwrite(text, 1, textlen, stdout) != (size_t)textlen) {
-		perror("fwrite");
-		exit(1);
-	}
-}
-
-/*% The main processing routine */
 int
 main(int argc, char **argv) {
 	int c;
@@ -502,52 +78,9 @@ main(int argc, char **argv) {
 	isc_mem_t *mctx = NULL;
 	isc_result_t result;
 	int exit_status = 0;
-	isc_entropy_t *ectx = NULL;
-	isc_boolean_t load_zones = ISC_FALSE;
-	isc_boolean_t print = ISC_FALSE;
-	unsigned int flags = 0;
 
-	isc_commandline_errprint = ISC_FALSE;
-
-	/*
-	 * Process memory debugging argument first.
-	 */
-#define CMDLINE_FLAGS "dhjm:t:pvxz"
-	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != -1) {
+	while ((c = isc_commandline_parse(argc, argv, "t:v")) != EOF) {
 		switch (c) {
-		case 'm':
-			if (strcasecmp(isc_commandline_argument, "record") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGRECORD;
-			if (strcasecmp(isc_commandline_argument, "trace") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGTRACE;
-			if (strcasecmp(isc_commandline_argument, "usage") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGUSAGE;
-			if (strcasecmp(isc_commandline_argument, "size") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGSIZE;
-			if (strcasecmp(isc_commandline_argument, "mctx") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGCTX;
-			break;
-		default:
-			break;
-		}
-	}
-	isc_commandline_reset = ISC_TRUE;
-
-	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
-
-	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != EOF) {
-		switch (c) {
-		case 'd':
-			debug++;
-			break;
-
-		case 'j':
-			nomerge = ISC_FALSE;
-			break;
-
-		case 'm':
-			break;
-
 		case 't':
 			result = isc_dir_chroot(isc_commandline_argument);
 			if (result != ISC_R_SUCCESS) {
@@ -555,65 +88,31 @@ main(int argc, char **argv) {
 					isc_result_totext(result));
 				exit(1);
 			}
-			break;
-
-		case 'p':
-			print = ISC_TRUE;
+			result = isc_dir_chdir("/");
+			if (result != ISC_R_SUCCESS) {
+				fprintf(stderr, "isc_dir_chdir: %s\n",
+					isc_result_totext(result));
+				exit(1);
+			}
 			break;
 
 		case 'v':
 			printf(VERSION "\n");
 			exit(0);
 
-		case 'x':
-			flags |= CFG_PRINTER_XKEY;
-			break;
-
-		case 'z':
-			load_zones = ISC_TRUE;
-			docheckmx = ISC_FALSE;
-			docheckns = ISC_FALSE;
-			dochecksrv = ISC_FALSE;
-			break;
-
-		case '?':
-			if (isc_commandline_option != '?')
-				fprintf(stderr, "%s: invalid argument -%c\n",
-					program, isc_commandline_option);
-			/* FALLTHROUGH */
-		case 'h':
-			usage();
-
 		default:
-			fprintf(stderr, "%s: unhandled option -%c\n",
-				program, isc_commandline_option);
-			exit(1);
+			usage();
 		}
 	}
 
-	if (((flags & CFG_PRINTER_XKEY) != 0) && !print) {
-		fprintf(stderr, "%s: -x cannot be used without -p\n", program);
-		exit(1);
-	}
-
-	if (isc_commandline_index + 1 < argc)
-		usage();
 	if (argv[isc_commandline_index] != NULL)
 		conffile = argv[isc_commandline_index];
 	if (conffile == NULL || conffile[0] == '\0')
 		conffile = NAMED_CONFFILE;
 
-#ifdef _WIN32
-	InitSockets();
-#endif
+	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
 
-	RUNTIME_CHECK(setup_logging(mctx, stdout, &logc) == ISC_R_SUCCESS);
-
-	RUNTIME_CHECK(isc_entropy_create(mctx, &ectx) == ISC_R_SUCCESS);
-	RUNTIME_CHECK(isc_hash_create(mctx, ectx, DNS_NAME_MAXWIRE)
-		      == ISC_R_SUCCESS);
-
-	dns_result_register();
+	RUNTIME_CHECK(setup_logging(mctx, &logc) == ISC_R_SUCCESS);
 
 	RUNTIME_CHECK(cfg_parser_create(mctx, logc, &parser) == ISC_R_SUCCESS);
 
@@ -623,34 +122,17 @@ main(int argc, char **argv) {
 	    ISC_R_SUCCESS)
 		exit(1);
 
-	result = bind9_check_namedconf(config, logc, mctx);
+	result = cfg_check_namedconf(config, logc, mctx);
 	if (result != ISC_R_SUCCESS)
 		exit_status = 1;
 
-	if (result == ISC_R_SUCCESS && load_zones) {
-		result = load_zones_fromconfig(config, mctx);
-		if (result != ISC_R_SUCCESS)
-			exit_status = 1;
-	}
-
-	if (print && exit_status == 0)
-		cfg_printx(config, flags, output, NULL);
 	cfg_obj_destroy(parser, &config);
 
 	cfg_parser_destroy(&parser);
 
-	dns_name_destroy();
-
 	isc_log_destroy(&logc);
 
-	isc_hash_destroy();
-	isc_entropy_detach(&ectx);
-
 	isc_mem_destroy(&mctx);
 
-#ifdef _WIN32
-	DestroySockets();
-#endif
-
 	return (exit_status);
 }

bin/check/named-checkconf.docbook

@@ -1,29 +1,26 @@
-<!DOCTYPE book [
-<!ENTITY mdash "&#8212;">]>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 <!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2001, 2002  Internet Software Consortium.
  -
- - Permission to use, copy, modify, and/or distribute this software for any
+ - Permission to use, copy, modify, and distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
  - copyright notice and this permission notice appear in all copies.
  -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ - DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ - INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ - FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ - NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ - WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkconf">
-  <info>
-    <date>2014-01-10</date>
-  </info>
+<!-- $Id: named-checkconf.docbook,v 1.3.2.1 2002/02/08 03:56:57 marka Exp $ -->
+
+<refentry>
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>June 14, 2000</date>
   </refentryinfo>
 
   <refmeta>
@@ -32,170 +29,97 @@
     <refmiscinfo>BIND9</refmiscinfo>
   </refmeta>
 
-  <docinfo>
-    <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
-      <year>2004</year>
-      <year>2005</year>
-      <year>2007</year>
-      <year>2009</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
-      <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
-    </copyright>
-  </docinfo>
-
   <refnamediv>
     <refname><application>named-checkconf</application></refname>
     <refpurpose>named configuration file syntax checking tool</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-checkconf</command>
-      <arg choice="opt" rep="norepeat"><option>-hjvz</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-p</option>
-	<arg choice="opt" rep="norepeat"><option>-x</option>
-      </arg></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="req">filename</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
-    <para><command>named-checkconf</command>
-      checks the syntax, but not the semantics, of a
-      <command>named</command> configuration file.  The file is parsed
-      and checked for syntax errors, along with all files included by it.
-      If no file is specified, <filename>/etc/named.conf</filename> is read
-      by default.
-    </para>
+  <refsect1>
+    <title>DESCRIPTION</title>
     <para>
-      Note: files that <command>named</command> reads in separate
-      parser contexts, such as <filename>rndc.key</filename> and
-      <filename>bind.keys</filename>, are not automatically read
-      by <command>named-checkconf</command>.  Configuration
-      errors in these files may cause <command>named</command> to
-      fail to run, even if <command>named-checkconf</command> was
-      successful.  <command>named-checkconf</command> can be run
-      on these files explicitly, however.
+        <command>named-checkconf</command> checks the syntax, but not
+	the semantics, of a named configuration file.
     </para>
-  </refsection>
+  </refsect1>
 
-  <refsection><info><title>OPTIONS</title></info>
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
-      <varlistentry>
-        <term>-h</term>
-        <listitem>
-          <para>
-            Print the usage summary and exit.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-j</term>
-        <listitem>
-          <para>
-            When loading a zonefile read the journal if it exists.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-p</term>
-        <listitem>
-          <para>
-	    Print out the <filename>named.conf</filename> and included files
-	    in canonical form if no errors were detected.
-            See also the <option>-x</option> option.
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-t <replaceable class="parameter">directory</replaceable></term>
-        <listitem>
-          <para>
-            Chroot to <filename>directory</filename> so that include
-            directives in the configuration file are processed as if
-            run by a similarly chrooted <command>named</command>.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	      chroot to <filename>directory</filename> so that include
+	      directives in the configuration file are processed as if
+	      run by a similarly chrooted named.
+	  </para>
+	</listitem>
       </varlistentry>
 
       <varlistentry>
         <term>-v</term>
-        <listitem>
-          <para>
-            Print the version of the <command>named-checkconf</command>
-            program and exit.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-x</term>
-        <listitem>
-          <para>
-	    When printing the configuration files in canonical
-            form, obscure shared secrets by replacing them with
-            strings of question marks ('?'). This allows the
-            contents of <filename>named.conf</filename> and related
-            files to be shared &mdash; for example, when submitting
-            bug reports &mdash; without compromising private data.
-            This option cannot be used without <option>-p</option>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-z</term>
-        <listitem>
-          <para>
-	    Perform a test load of all master zones found in
-	    <filename>named.conf</filename>.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	      Print the version of the <command>named-checkconf</command>
+	      program and exit.
+	  </para>
+	</listitem>
       </varlistentry>
 
       <varlistentry>
         <term>filename</term>
-        <listitem>
-          <para>
-            The name of the configuration file to be checked.  If not
-            specified, it defaults to <filename>/etc/named.conf</filename>.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	       The name of the configuration file to be checked.  If not
+	       specified, it defaults to <filename>/etc/named.conf</filename>.
+	  </para>
+	</listitem>
       </varlistentry>
 
     </variablelist>
 
-  </refsection>
+  </refsect1>
 
-  <refsection><info><title>RETURN VALUES</title></info>
+  <refsect1>
+    <title>RETURN VALUES</title>
+    <para>
+        <command>named-checkconf</command> returns an exit status of 1 if
+	errors were detected and 0 otherwise.
+  </refsect1>
 
-    <para><command>named-checkconf</command>
-      returns an exit status of 1 if
-      errors were detected and 0 otherwise.
-    </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
-
-    <para><citerefentry>
-        <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
+  <refsect1>
+    <title>SEE ALSO</title>
+    <para>
       <citerefentry>
-        <refentrytitle>named-checkzone</refentrytitle><manvolnum>8</manvolnum>
+        <refentrytitle>named</refentrytitle>
+	<manvolnum>8</manvolnum>
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
+  </refsect1>
+
+  <refsect1>
+    <title>AUTHOR</title>
+    <para>
+        <corpauthor>Internet Software Consortium</corpauthor>
+    </para>
+  </refsect1>
+
 </refentry>
+
+<!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->
+

bin/check/named-checkconf.html

@@ -1,166 +1,193 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000, 2001  Internet Software Consortium.
  - 
- - Permission to use, copy, modify, and/or distribute this software for any
+ - Permission to use, copy, modify, and distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
  - copyright notice and this permission notice appear in all copies.
  - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ - DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ - INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ - FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ - NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ - WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title>named-checkconf</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
-</head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
-<a name="man.named-checkconf"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  
-
-  <div class="refnamediv">
-<h2>Name</h2>
-<p>
-    <span class="application">named-checkconf</span>
-     &#8212; named configuration file syntax checking tool
-  </p>
-</div>
-
-  <div class="refsynopsisdiv">
-<h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-checkconf</code> 
-       [<code class="option">-hjvz</code>]
-       [<code class="option">-p</code>
-	 [<code class="option">-x</code>
-      ]]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       {filename}
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>named-checkconf</strong></span>
-      checks the syntax, but not the semantics, of a
-      <span class="command"><strong>named</strong></span> configuration file.  The file is parsed
-      and checked for syntax errors, along with all files included by it.
-      If no file is specified, <code class="filename">/etc/named.conf</code> is read
-      by default.
-    </p>
-    <p>
-      Note: files that <span class="command"><strong>named</strong></span> reads in separate
-      parser contexts, such as <code class="filename">rndc.key</code> and
-      <code class="filename">bind.keys</code>, are not automatically read
-      by <span class="command"><strong>named-checkconf</strong></span>.  Configuration
-      errors in these files may cause <span class="command"><strong>named</strong></span> to
-      fail to run, even if <span class="command"><strong>named-checkconf</strong></span> was
-      successful.  <span class="command"><strong>named-checkconf</strong></span> can be run
-      on these files explicitly, however.
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-    <div class="variablelist"><dl class="variablelist">
-<dt><span class="term">-h</span></dt>
-<dd>
-          <p>
-            Print the usage summary and exit.
-          </p>
-        </dd>
-<dt><span class="term">-j</span></dt>
-<dd>
-          <p>
-            When loading a zonefile read the journal if it exists.
-          </p>
-        </dd>
-<dt><span class="term">-p</span></dt>
-<dd>
-          <p>
-	    Print out the <code class="filename">named.conf</code> and included files
-	    in canonical form if no errors were detected.
-            See also the <code class="option">-x</code> option.
-          </p>
-        </dd>
-<dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
-            Chroot to <code class="filename">directory</code> so that include
-            directives in the configuration file are processed as if
-            run by a similarly chrooted <span class="command"><strong>named</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-v</span></dt>
-<dd>
-          <p>
-            Print the version of the <span class="command"><strong>named-checkconf</strong></span>
-            program and exit.
-          </p>
-        </dd>
-<dt><span class="term">-x</span></dt>
-<dd>
-          <p>
-	    When printing the configuration files in canonical
-            form, obscure shared secrets by replacing them with
-            strings of question marks ('?'). This allows the
-            contents of <code class="filename">named.conf</code> and related
-            files to be shared &#8212; for example, when submitting
-            bug reports &#8212; without compromising private data.
-            This option cannot be used without <code class="option">-p</code>.
-          </p>
-        </dd>
-<dt><span class="term">-z</span></dt>
-<dd>
-          <p>
-	    Perform a test load of all master zones found in
-	    <code class="filename">named.conf</code>.
-          </p>
-        </dd>
-<dt><span class="term">filename</span></dt>
-<dd>
-          <p>
-            The name of the configuration file to be checked.  If not
-            specified, it defaults to <code class="filename">/etc/named.conf</code>.
-          </p>
-        </dd>
-</dl></div>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>RETURN VALUES</h2>
-
-    <p><span class="command"><strong>named-checkconf</strong></span>
-      returns an exit status of 1 if
-      errors were detected and 0 otherwise.
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named-checkzone</span>(8)
-      </span>,
-      <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
-    </p>
-  </div>
-</div></body>
-</html>
+<HTML
+><HEAD
+><TITLE
+>named-checkconf</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.73
+"></HEAD
+><BODY
+CLASS="REFENTRY"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><H1
+><A
+NAME="AEN1"
+><SPAN
+CLASS="APPLICATION"
+>named-checkconf</SPAN
+></A
+></H1
+><DIV
+CLASS="REFNAMEDIV"
+><A
+NAME="AEN9"
+></A
+><H2
+>Name</H2
+><SPAN
+CLASS="APPLICATION"
+>named-checkconf</SPAN
+>&nbsp;--&nbsp;named configuration file syntax checking tool</DIV
+><DIV
+CLASS="REFSYNOPSISDIV"
+><A
+NAME="AEN13"
+></A
+><H2
+>Synopsis</H2
+><P
+><B
+CLASS="COMMAND"
+>named-checkconf</B
+>  [<TT
+CLASS="OPTION"
+>-v</TT
+>] [<TT
+CLASS="OPTION"
+>-t <TT
+CLASS="REPLACEABLE"
+><I
+>directory</I
+></TT
+></TT
+>] {filename}</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN22"
+></A
+><H2
+>DESCRIPTION</H2
+><P
+>        <B
+CLASS="COMMAND"
+>named-checkconf</B
+> checks the syntax, but not
+	the semantics, of a named configuration file.
+    </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN26"
+></A
+><H2
+>OPTIONS</H2
+><P
+></P
+><DIV
+CLASS="VARIABLELIST"
+><DL
+><DT
+>-t <TT
+CLASS="REPLACEABLE"
+><I
+>directory</I
+></TT
+></DT
+><DD
+><P
+>	      chroot to <TT
+CLASS="FILENAME"
+>directory</TT
+> so that include
+	      directives in the configuration file are processed as if
+	      run by a similarly chrooted named.
+	  </P
+></DD
+><DT
+>-v</DT
+><DD
+><P
+>	      Print the version of the <B
+CLASS="COMMAND"
+>named-checkconf</B
+>
+	      program and exit.
+	  </P
+></DD
+><DT
+>filename</DT
+><DD
+><P
+>	       The name of the configuration file to be checked.  If not
+	       specified, it defaults to <TT
+CLASS="FILENAME"
+>/etc/named.conf</TT
+>.
+	  </P
+></DD
+></DL
+></DIV
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN45"
+></A
+><H2
+>RETURN VALUES</H2
+><P
+>        <B
+CLASS="COMMAND"
+>named-checkconf</B
+> returns an exit status of 1 if
+	errors were detected and 0 otherwise.
+  </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN49"
+></A
+><H2
+>SEE ALSO</H2
+><P
+>      <SPAN
+CLASS="CITEREFENTRY"
+><SPAN
+CLASS="REFENTRYTITLE"
+>named</SPAN
+>(8)</SPAN
+>,
+      <I
+CLASS="CITETITLE"
+>BIND 9 Administrator Reference Manual</I
+>.
+    </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN56"
+></A
+><H2
+>AUTHOR</H2
+><P
+>        Internet Software Consortium
+    </P
+></DIV
+></BODY
+></HTML
+>

bin/check/named-checkzone.8

@@ -1,321 +1,64 @@
-.\" Copyright (C) 2000-2002, 2004-2007, 2009-2011, 2013-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
+.\"
+.\" Copyright (C) 2000, 2001  Internet Software Consortium.
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
 .\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.hy 0
-.ad l
-'\" t
-.\"     Title: named-checkzone
-.\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2013-04-29
-.\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+.\" DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+.\" INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+.\" FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+.\" NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+.\" WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.TH "NAMED\-CHECKZONE" "8" "2013\-04\-29" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
-.SH "NAME"
-named-checkzone, named-compilezone \- zone file validity checking or converting tool
-.SH "SYNOPSIS"
-.HP \w'\fBnamed\-checkzone\fR\ 'u
-\fBnamed\-checkzone\fR [\fB\-d\fR] [\fB\-h\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-M\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-o\ \fR\fB\fIfilename\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-S\ \fR\fB\fImode\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {zonename} {filename}
-.HP \w'\fBnamed\-compilezone\fR\ 'u
-\fBnamed\-compilezone\fR [\fB\-d\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-C\ \fR\fB\fImode\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {\fB\-o\ \fR\fB\fIfilename\fR\fR} {zonename} {filename}
+.TH "NAMED-CHECKZONE" "8" "June 13, 2000" "BIND9" ""
+.SH NAME
+named-checkzone \- zone file validity checking tool
+.SH SYNOPSIS
+.sp
+\fBnamed-checkzone\fR [ \fB-d\fR ]  [ \fB-j\fR ]  [ \fB-q\fR ]  [ \fB-v\fR ]  [ \fB-c \fIclass\fB\fR ]  \fBzonename\fR \fBfilename\fR
 .SH "DESCRIPTION"
 .PP
-\fBnamed\-checkzone\fR
-checks the syntax and integrity of a zone file\&. It performs the same checks as
-\fBnamed\fR
-does when loading a zone\&. This makes
-\fBnamed\-checkzone\fR
-useful for checking zone files before configuring them into a name server\&.
-.PP
-\fBnamed\-compilezone\fR
-is similar to
-\fBnamed\-checkzone\fR, but it always dumps the zone contents to a specified file in a specified format\&. Additionally, it applies stricter check levels by default, since the dump output will be used as an actual zone file loaded by
-\fBnamed\fR\&. When manually specified otherwise, the check levels must at least be as strict as those specified in the
-\fBnamed\fR
-configuration file\&.
+\fBnamed-checkzone\fR checks the syntax and integrity of
+a zone file. It performs the same checks as \fBnamed\fR
+does when loading a zone. This makes
+\fBnamed-checkzone\fR useful for checking zone
+files before configuring them into a name server.
 .SH "OPTIONS"
-.PP
-\-d
-.RS 4
-Enable debugging\&.
-.RE
-.PP
-\-h
-.RS 4
-Print the usage summary and exit\&.
-.RE
-.PP
-\-q
-.RS 4
-Quiet mode \- exit code only\&.
-.RE
-.PP
-\-v
-.RS 4
-Print the version of the
-\fBnamed\-checkzone\fR
-program and exit\&.
-.RE
-.PP
-\-j
-.RS 4
-When loading the zone file read the journal if it exists\&.
-.RE
-.PP
-\-c \fIclass\fR
-.RS 4
-Specify the class of the zone\&. If not specified, "IN" is assumed\&.
-.RE
-.PP
-\-i \fImode\fR
-.RS 4
-Perform post\-load zone integrity checks\&. Possible modes are
-\fB"full"\fR
-(default),
-\fB"full\-sibling"\fR,
-\fB"local"\fR,
-\fB"local\-sibling"\fR
-and
-\fB"none"\fR\&.
-.sp
-Mode
-\fB"full"\fR
-checks that MX records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
-\fB"local"\fR
-only checks MX records which refer to in\-zone hostnames\&.
-.sp
-Mode
-\fB"full"\fR
-checks that SRV records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
-\fB"local"\fR
-only checks SRV records which refer to in\-zone hostnames\&.
-.sp
-Mode
-\fB"full"\fR
-checks that delegation NS records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. It also checks that glue address records in the zone match those advertised by the child\&. Mode
-\fB"local"\fR
-only checks NS records which refer to in\-zone hostnames or that some required glue exists, that is when the nameserver is in a child zone\&.
-.sp
-Mode
-\fB"full\-sibling"\fR
-and
-\fB"local\-sibling"\fR
-disable sibling glue checks but are otherwise the same as
-\fB"full"\fR
-and
-\fB"local"\fR
-respectively\&.
-.sp
-Mode
-\fB"none"\fR
-disables the checks\&.
-.RE
-.PP
-\-f \fIformat\fR
-.RS 4
-Specify the format of the zone file\&. Possible formats are
-\fB"text"\fR
-(default) and
-\fB"raw"\fR\&.
-.RE
-.PP
-\-F \fIformat\fR
-.RS 4
-Specify the format of the output file specified\&. For
-\fBnamed\-checkzone\fR, this does not cause any effects unless it dumps the zone contents\&.
-.sp
-Possible formats are
-\fB"text"\fR
-(default) and
-\fB"raw"\fR
-or
-\fB"raw=N"\fR, which store the zone in a binary format for rapid loading by
-\fBnamed\fR\&.
-\fB"raw=N"\fR
-specifies the format version of the raw zone file: if N is 0, the raw file can be read by any version of
-\fBnamed\fR; if N is 1, the file can be read by release 9\&.9\&.0 or higher\&. The default is 1\&.
-.RE
-.PP
-\-k \fImode\fR
-.RS 4
-Perform
-\fB"check\-names"\fR
-checks with the specified failure mode\&. Possible modes are
-\fB"fail"\fR
-(default for
-\fBnamed\-compilezone\fR),
-\fB"warn"\fR
-(default for
-\fBnamed\-checkzone\fR) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-L \fIserial\fR
-.RS 4
-When compiling a zone to \*(Aqraw\*(Aq format, set the "source serial" value in the header to the specified serial number\&. (This is expected to be used primarily for testing purposes\&.)
-.RE
-.PP
-\-m \fImode\fR
-.RS 4
-Specify whether MX records should be checked to see if they are addresses\&. Possible modes are
-\fB"fail"\fR,
-\fB"warn"\fR
-(default) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-M \fImode\fR
-.RS 4
-Check if a MX record refers to a CNAME\&. Possible modes are
-\fB"fail"\fR,
-\fB"warn"\fR
-(default) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-n \fImode\fR
-.RS 4
-Specify whether NS records should be checked to see if they are addresses\&. Possible modes are
-\fB"fail"\fR
-(default for
-\fBnamed\-compilezone\fR),
-\fB"warn"\fR
-(default for
-\fBnamed\-checkzone\fR) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-o \fIfilename\fR
-.RS 4
-Write zone output to
-filename\&. If
-filename
-is
-\-
-then write to standard out\&. This is mandatory for
-\fBnamed\-compilezone\fR\&.
-.RE
-.PP
-\-r \fImode\fR
-.RS 4
-Check for records that are treated as different by DNSSEC but are semantically equal in plain DNS\&. Possible modes are
-\fB"fail"\fR,
-\fB"warn"\fR
-(default) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-s \fIstyle\fR
-.RS 4
-Specify the style of the dumped zone file\&. Possible styles are
-\fB"full"\fR
-(default) and
-\fB"relative"\fR\&. The full format is most suitable for processing automatically by a separate script\&. On the other hand, the relative format is more human\-readable and is thus suitable for editing by hand\&. For
-\fBnamed\-checkzone\fR
-this does not cause any effects unless it dumps the zone contents\&. It also does not have any meaning if the output format is not text\&.
-.RE
-.PP
-\-S \fImode\fR
-.RS 4
-Check if a SRV record refers to a CNAME\&. Possible modes are
-\fB"fail"\fR,
-\fB"warn"\fR
-(default) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-t \fIdirectory\fR
-.RS 4
-Chroot to
-directory
-so that include directives in the configuration file are processed as if run by a similarly chrooted named\&.
-.RE
-.PP
-\-T \fImode\fR
-.RS 4
-Check if Sender Policy Framework (SPF) records exist and issues a warning if an SPF\-formatted TXT record is not also present\&. Possible modes are
-\fB"warn"\fR
-(default),
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-w \fIdirectory\fR
-.RS 4
-chdir to
-directory
-so that relative filenames in master file $INCLUDE directives work\&. This is similar to the directory clause in
-named\&.conf\&.
-.RE
-.PP
-\-D
-.RS 4
-Dump zone file in canonical format\&. This is always enabled for
-\fBnamed\-compilezone\fR\&.
-.RE
-.PP
-\-W \fImode\fR
-.RS 4
-Specify whether to check for non\-terminal wildcards\&. Non\-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (RFC 1034)\&. Possible modes are
-\fB"warn"\fR
-(default) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-zonename
-.RS 4
-The domain name of the zone being checked\&.
-.RE
-.PP
-filename
-.RS 4
-The name of the zone file\&.
-.RE
+.TP
+\fB-d\fR
+Enable debugging.
+.TP
+\fB-q\fR
+Quiet mode - exit code only.
+.TP
+\fB-v\fR
+Print the version of the \fBnamed-checkzone\fR
+program and exit.
+.TP
+\fB-j\fR
+When loading the zone file read the journal if it exists.
+.TP
+\fB-c \fIclass\fB\fR
+Specify the class of the zone. If not specified "IN" is assumed.
+.TP
+\fBzonename\fR
+The domain name of the zone being checked.
+.TP
+\fBfilename\fR
+The name of the zone file.
 .SH "RETURN VALUES"
 .PP
-\fBnamed\-checkzone\fR
-returns an exit status of 1 if errors were detected and 0 otherwise\&.
+\fBnamed-checkzone\fR returns an exit status of 1 if
+errors were detected and 0 otherwise.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed-checkconf\fR(8),
-RFC 1035,
-BIND 9 Administrator Reference Manual\&.
+\fIRFC 1035\fR,
+\fIBIND 9 Administrator Reference Manual\fR.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
-.SH "COPYRIGHT"
-.br
-Copyright \(co 2000-2002, 2004-2007, 2009-2011, 2013-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.br
+Internet Software Consortium

bin/check/named-checkzone.c

@@ -1,22 +1,21 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2002  Internet Software Consortium.
  *
- * Permission to use, copy, modify, and/or distribute this software for any
+ * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ * DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: named-checkzone.c,v 1.65 2011/12/22 17:29:22 each Exp $ */
-
-/*! \file */
+/* $Id: named-checkzone.c,v 1.13.2.3 2002/07/11 05:44:10 marka Exp $ */
 
 #include <config.h>
 
@@ -24,12 +23,8 @@
 
 #include <isc/app.h>
 #include <isc/commandline.h>
-#include <isc/dir.h>
-#include <isc/entropy.h>
-#include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
-#include <isc/print.h>
 #include <isc/socket.h>
 #include <isc/string.h>
 #include <isc/task.h>
@@ -39,27 +34,20 @@
 #include <dns/db.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
-#include <dns/master.h>
-#include <dns/masterdump.h>
-#include <dns/name.h>
 #include <dns/rdataclass.h>
 #include <dns/rdataset.h>
 #include <dns/result.h>
-#include <dns/types.h>
 #include <dns/zone.h>
 
 #include "check-tool.h"
 
+static int debug = 0;
+isc_boolean_t nomerge = ISC_TRUE;
 static int quiet = 0;
 static isc_mem_t *mctx = NULL;
-static isc_entropy_t *ectx = NULL;
 dns_zone_t *zone = NULL;
 dns_zonetype_t zonetype = dns_zone_master;
-static int dumpzone = 0;
-static const char *output_filename;
-static const char *prog_name = NULL;
-static const dns_master_style_t *outputstyle = NULL;
-static enum { progmode_check, progmode_compile } progmode;
+static const char *dbtype[] = { "rbt" };
 
 #define ERRRET(result, function) \
 	do { \
@@ -71,34 +59,67 @@ static enum { progmode_check, progmode_compile } progmode;
 		} \
 	} while (0)
 
-ISC_PLATFORM_NORETURN_PRE static void
-usage(void) ISC_PLATFORM_NORETURN_POST;
-
 static void
 usage(void) {
 	fprintf(stderr,
-		"usage: %s [-djqvD] [-c class] "
-		"[-f inputformat] [-F outputformat] "
-		"[-t directory] [-w directory] [-k (ignore|warn|fail)] "
-		"[-n (ignore|warn|fail)] [-m (ignore|warn|fail)] "
-		"[-r (ignore|warn|fail)] "
-		"[-i (full|full-sibling|local|local-sibling|none)] "
-		"[-M (ignore|warn|fail)] [-S (ignore|warn|fail)] "
-		"[-W (ignore|warn)] "
-		"%s zonename filename\n",
-		prog_name,
-		progmode == progmode_check ? "[-o filename]" : "-o filename");
+		"usage: named-checkzone [-djqv] [-c class] zonename filename \n");
 	exit(1);
 }
 
+static isc_result_t
+setup(char *zonename, char *filename, char *classname) {
+	isc_result_t result;
+	dns_rdataclass_t rdclass;
+	isc_textregion_t region;
+	isc_buffer_t buffer;
+	dns_fixedname_t fixorigin;
+	dns_name_t *origin;
+
+	if (debug)
+		fprintf(stderr, "loading \"%s\" from \"%s\" class \"%s\"\n",
+			zonename, filename, classname);
+	result = dns_zone_create(&zone, mctx);
+	ERRRET(result, "dns_zone_new");
+
+	dns_zone_settype(zone, zonetype);
+
+	isc_buffer_init(&buffer, zonename, strlen(zonename));
+	isc_buffer_add(&buffer, strlen(zonename));
+	dns_fixedname_init(&fixorigin);
+	result = dns_name_fromtext(dns_fixedname_name(&fixorigin),
+			  	   &buffer, dns_rootname, ISC_FALSE, NULL);
+	ERRRET(result, "dns_name_fromtext");
+	origin = dns_fixedname_name(&fixorigin);
+
+	result = dns_zone_setorigin(zone, origin);
+	ERRRET(result, "dns_zone_setorigin");
+
+	result = dns_zone_setdbtype(zone, 1, (const char * const *) dbtype);
+	ERRRET(result, "dns_zone_setdatabase");
+
+	result = dns_zone_setfile(zone, filename);
+	ERRRET(result, "dns_zone_setdatabase");
+
+	region.base = classname;
+	region.length = strlen(classname);
+	result = dns_rdataclass_fromtext(&rdclass, &region);
+	ERRRET(result, "dns_rdataclass_fromtext");
+
+	dns_zone_setclass(zone, rdclass);
+	dns_zone_setoption(zone, DNS_ZONEOPT_MANYERRORS, ISC_TRUE);
+	dns_zone_setoption(zone, DNS_ZONEOPT_NOMERGE, nomerge);
+
+	result = dns_zone_load(zone);
+
+	return (result);
+}
+
 static void
 destroy(void) {
 	if (zone != NULL)
 		dns_zone_detach(&zone);
-	dns_name_destroy();
 }
 
-/*% main processing routine */
 int
 main(int argc, char **argv) {
 	int c;
@@ -108,437 +129,50 @@ main(int argc, char **argv) {
 	isc_result_t result;
 	char classname_in[] = "IN";
 	char *classname = classname_in;
-	const char *workdir = NULL;
-	const char *inputformatstr = NULL;
-	const char *outputformatstr = NULL;
-	dns_masterformat_t inputformat = dns_masterformat_text;
-	dns_masterformat_t outputformat = dns_masterformat_text;
-	dns_masterrawheader_t header;
-	isc_uint32_t rawversion = 1, serialnum = 0;
-	isc_boolean_t snset = ISC_FALSE;
-	isc_boolean_t logdump = ISC_FALSE;
-	FILE *errout = stdout;
-	char *endp;
 
-	outputstyle = &dns_master_style_full;
-
-	prog_name = strrchr(argv[0], '/');
-	if (prog_name == NULL)
-		prog_name = strrchr(argv[0], '\\');
-	if (prog_name != NULL)
-		prog_name++;
-	else
-		prog_name = argv[0];
-	/*
-	 * Libtool doesn't preserve the program name prior to final
-	 * installation.  Remove the libtool prefix ("lt-").
-	 */
-	if (strncmp(prog_name, "lt-", 3) == 0)
-		prog_name += 3;
-
-#define PROGCMP(X) \
-	(strcasecmp(prog_name, X) == 0 || strcasecmp(prog_name, X ".exe") == 0)
-
-	if (PROGCMP("named-checkzone"))
-		progmode = progmode_check;
-	else if (PROGCMP("named-compilezone"))
-		progmode = progmode_compile;
-	else
-		INSIST(0);
-
-	/* Compilation specific defaults */
-	if (progmode == progmode_compile) {
-		zone_options |= (DNS_ZONEOPT_CHECKNS |
-				 DNS_ZONEOPT_FATALNS |
-				 DNS_ZONEOPT_CHECKSPF |
-				 DNS_ZONEOPT_CHECKDUPRR |
-				 DNS_ZONEOPT_CHECKNAMES |
-				 DNS_ZONEOPT_CHECKNAMESFAIL |
-				 DNS_ZONEOPT_CHECKWILDCARD);
-	} else
-		zone_options |= (DNS_ZONEOPT_CHECKDUPRR |
-				 DNS_ZONEOPT_CHECKSPF);
-
-#define ARGCMP(X) (strcmp(isc_commandline_argument, X) == 0)
-
-	isc_commandline_errprint = ISC_FALSE;
-
-	while ((c = isc_commandline_parse(argc, argv,
-			       "c:df:hi:jk:L:m:n:qr:s:t:o:vw:DF:M:S:T:W:"))
-	       != EOF) {
+	while ((c = isc_commandline_parse(argc, argv, "c:djqsv")) != EOF) {
 		switch (c) {
 		case 'c':
 			classname = isc_commandline_argument;
 			break;
-
 		case 'd':
 			debug++;
 			break;
 
-		case 'i':
-			if (ARGCMP("full")) {
-				zone_options |= DNS_ZONEOPT_CHECKINTEGRITY |
-						DNS_ZONEOPT_CHECKSIBLING;
-				docheckmx = ISC_TRUE;
-				docheckns = ISC_TRUE;
-				dochecksrv = ISC_TRUE;
-			} else if (ARGCMP("full-sibling")) {
-				zone_options |= DNS_ZONEOPT_CHECKINTEGRITY;
-				zone_options &= ~DNS_ZONEOPT_CHECKSIBLING;
-				docheckmx = ISC_TRUE;
-				docheckns = ISC_TRUE;
-				dochecksrv = ISC_TRUE;
-			} else if (ARGCMP("local")) {
-				zone_options |= DNS_ZONEOPT_CHECKINTEGRITY;
-				zone_options |= DNS_ZONEOPT_CHECKSIBLING;
-				docheckmx = ISC_FALSE;
-				docheckns = ISC_FALSE;
-				dochecksrv = ISC_FALSE;
-			} else if (ARGCMP("local-sibling")) {
-				zone_options |= DNS_ZONEOPT_CHECKINTEGRITY;
-				zone_options &= ~DNS_ZONEOPT_CHECKSIBLING;
-				docheckmx = ISC_FALSE;
-				docheckns = ISC_FALSE;
-				dochecksrv = ISC_FALSE;
-			} else if (ARGCMP("none")) {
-				zone_options &= ~DNS_ZONEOPT_CHECKINTEGRITY;
-				zone_options &= ~DNS_ZONEOPT_CHECKSIBLING;
-				docheckmx = ISC_FALSE;
-				docheckns = ISC_FALSE;
-				dochecksrv = ISC_FALSE;
-			} else {
-				fprintf(stderr, "invalid argument to -i: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 'f':
-			inputformatstr = isc_commandline_argument;
-			break;
-
-		case 'F':
-			outputformatstr = isc_commandline_argument;
-			break;
-
 		case 'j':
 			nomerge = ISC_FALSE;
 			break;
-
-		case 'k':
-			if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKNAMES;
-				zone_options &= ~DNS_ZONEOPT_CHECKNAMESFAIL;
-			} else if (ARGCMP("fail")) {
-				zone_options |= DNS_ZONEOPT_CHECKNAMES |
-						DNS_ZONEOPT_CHECKNAMESFAIL;
-			} else if (ARGCMP("ignore")) {
-				zone_options &= ~(DNS_ZONEOPT_CHECKNAMES |
-						  DNS_ZONEOPT_CHECKNAMESFAIL);
-			} else {
-				fprintf(stderr, "invalid argument to -k: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 'L':
-			snset = ISC_TRUE;
-			endp = NULL;
-			serialnum = strtol(isc_commandline_argument, &endp, 0);
-			if (*endp != '\0') {
-				fprintf(stderr, "source serial number "
-						"must be numeric");
-				exit(1);
-			}
-			break;
-
-		case 'n':
-			if (ARGCMP("ignore")) {
-				zone_options &= ~(DNS_ZONEOPT_CHECKNS|
-						  DNS_ZONEOPT_FATALNS);
-			} else if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKNS;
-				zone_options &= ~DNS_ZONEOPT_FATALNS;
-			} else if (ARGCMP("fail")) {
-				zone_options |= DNS_ZONEOPT_CHECKNS|
-						DNS_ZONEOPT_FATALNS;
-			} else {
-				fprintf(stderr, "invalid argument to -n: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 'm':
-			if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKMX;
-				zone_options &= ~DNS_ZONEOPT_CHECKMXFAIL;
-			} else if (ARGCMP("fail")) {
-				zone_options |= DNS_ZONEOPT_CHECKMX |
-						DNS_ZONEOPT_CHECKMXFAIL;
-			} else if (ARGCMP("ignore")) {
-				zone_options &= ~(DNS_ZONEOPT_CHECKMX |
-						  DNS_ZONEOPT_CHECKMXFAIL);
-			} else {
-				fprintf(stderr, "invalid argument to -m: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 'o':
-			output_filename = isc_commandline_argument;
-			break;
-
 		case 'q':
 			quiet++;
 			break;
-
-		case 'r':
-			if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKDUPRR;
-				zone_options &= ~DNS_ZONEOPT_CHECKDUPRRFAIL;
-			} else if (ARGCMP("fail")) {
-				zone_options |= DNS_ZONEOPT_CHECKDUPRR |
-						DNS_ZONEOPT_CHECKDUPRRFAIL;
-			} else if (ARGCMP("ignore")) {
-				zone_options &= ~(DNS_ZONEOPT_CHECKDUPRR |
-						  DNS_ZONEOPT_CHECKDUPRRFAIL);
-			} else {
-				fprintf(stderr, "invalid argument to -r: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 's':
-			if (ARGCMP("full"))
-				outputstyle = &dns_master_style_full;
-			else if (ARGCMP("relative")) {
-				outputstyle = &dns_master_style_default;
-			} else {
-				fprintf(stderr,
-					"unknown or unsupported style: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 't':
-			result = isc_dir_chroot(isc_commandline_argument);
-			if (result != ISC_R_SUCCESS) {
-				fprintf(stderr, "isc_dir_chroot: %s: %s\n",
-					isc_commandline_argument,
-					isc_result_totext(result));
-				exit(1);
-			}
-			break;
-
 		case 'v':
 			printf(VERSION "\n");
 			exit(0);
-
-		case 'w':
-			workdir = isc_commandline_argument;
-			break;
-
-		case 'D':
-			dumpzone++;
-			break;
-
-		case 'M':
-			if (ARGCMP("fail")) {
-				zone_options &= ~DNS_ZONEOPT_WARNMXCNAME;
-				zone_options &= ~DNS_ZONEOPT_IGNOREMXCNAME;
-			} else if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_WARNMXCNAME;
-				zone_options &= ~DNS_ZONEOPT_IGNOREMXCNAME;
-			} else if (ARGCMP("ignore")) {
-				zone_options |= DNS_ZONEOPT_WARNMXCNAME;
-				zone_options |= DNS_ZONEOPT_IGNOREMXCNAME;
-			} else {
-				fprintf(stderr, "invalid argument to -M: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 'S':
-			if (ARGCMP("fail")) {
-				zone_options &= ~DNS_ZONEOPT_WARNSRVCNAME;
-				zone_options &= ~DNS_ZONEOPT_IGNORESRVCNAME;
-			} else if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_WARNSRVCNAME;
-				zone_options &= ~DNS_ZONEOPT_IGNORESRVCNAME;
-			} else if (ARGCMP("ignore")) {
-				zone_options |= DNS_ZONEOPT_WARNSRVCNAME;
-				zone_options |= DNS_ZONEOPT_IGNORESRVCNAME;
-			} else {
-				fprintf(stderr, "invalid argument to -S: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 'T':
-			if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKSPF;
-			} else if (ARGCMP("ignore")) {
-				zone_options &= ~DNS_ZONEOPT_CHECKSPF;
-			} else {
-				fprintf(stderr, "invalid argument to -T: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
-		case 'W':
-			if (ARGCMP("warn"))
-				zone_options |= DNS_ZONEOPT_CHECKWILDCARD;
-			else if (ARGCMP("ignore"))
-				zone_options &= ~DNS_ZONEOPT_CHECKWILDCARD;
-			break;
-
-		case '?':
-			if (isc_commandline_option != '?')
-				fprintf(stderr, "%s: invalid argument -%c\n",
-					prog_name, isc_commandline_option);
-			/* FALLTHROUGH */
-		case 'h':
-			usage();
-
 		default:
-			fprintf(stderr, "%s: unhandled option -%c\n",
-				prog_name, isc_commandline_option);
-			exit(1);
-		}
-	}
-
-	if (workdir != NULL) {
-		result = isc_dir_chdir(workdir);
-		if (result != ISC_R_SUCCESS) {
-			fprintf(stderr, "isc_dir_chdir: %s: %s\n",
-				workdir, isc_result_totext(result));
-			exit(1);
-		}
-	}
-
-	if (inputformatstr != NULL) {
-		if (strcasecmp(inputformatstr, "text") == 0)
-			inputformat = dns_masterformat_text;
-		else if (strcasecmp(inputformatstr, "raw") == 0)
-			inputformat = dns_masterformat_raw;
-		else if (strncasecmp(inputformatstr, "raw=", 4) == 0) {
-			inputformat = dns_masterformat_raw;
-			fprintf(stderr,
-				"WARNING: input format raw, version ignored\n");
-		} else {
-			fprintf(stderr, "unknown file format: %s\n",
-			    inputformatstr);
-			exit(1);
-		}
-	}
-
-	if (outputformatstr != NULL) {
-		if (strcasecmp(outputformatstr, "text") == 0) {
-			outputformat = dns_masterformat_text;
-		} else if (strcasecmp(outputformatstr, "raw") == 0) {
-			outputformat = dns_masterformat_raw;
-		} else if (strncasecmp(outputformatstr, "raw=", 4) == 0) {
-			char *end;
-
-			outputformat = dns_masterformat_raw;
-			rawversion = strtol(outputformatstr + 4, &end, 10);
-			if (end == outputformatstr + 4 || *end != '\0' ||
-			    rawversion > 1U) {
-				fprintf(stderr,
-					"unknown raw format version\n");
-				exit(1);
-			}
-		} else {
-			fprintf(stderr, "unknown file format: %s\n",
-				outputformatstr);
-			exit(1);
-		}
-	}
-
-	if (progmode == progmode_compile) {
-		dumpzone = 1;	/* always dump */
-		logdump = !quiet;
-		if (output_filename == NULL) {
-			fprintf(stderr,
-				"output file required, but not specified\n");
 			usage();
 		}
 	}
 
-	if (output_filename != NULL)
-		dumpzone = 1;
-
-	/*
-	 * If we are outputing to stdout then send the informational
-	 * output to stderr.
-	 */
-	if (dumpzone &&
-	    (output_filename == NULL ||
-	     strcmp(output_filename, "-") == 0 ||
-	     strcmp(output_filename, "/dev/fd/1") == 0 ||
-	     strcmp(output_filename, "/dev/stdout") == 0)) {
-		errout = stderr;
-		logdump = ISC_FALSE;
-	}
-
-	if (isc_commandline_index + 2 != argc)
+	if (isc_commandline_index + 2 > argc)
 		usage();
 
-#ifdef _WIN32
-	InitSockets();
-#endif
-
 	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
-	if (!quiet)
-		RUNTIME_CHECK(setup_logging(mctx, errout, &lctx)
-			      == ISC_R_SUCCESS);
-	RUNTIME_CHECK(isc_entropy_create(mctx, &ectx) == ISC_R_SUCCESS);
-	RUNTIME_CHECK(isc_hash_create(mctx, ectx, DNS_NAME_MAXWIRE)
-		      == ISC_R_SUCCESS);
+	if (!quiet) {
+		RUNTIME_CHECK(setup_logging(mctx, &lctx) == ISC_R_SUCCESS);
+		dns_log_init(lctx);
+		dns_log_setcontext(lctx);
+	}
 
 	dns_result_register();
 
 	origin = argv[isc_commandline_index++];
 	filename = argv[isc_commandline_index++];
-	result = load_zone(mctx, origin, filename, inputformat, classname,
-			   &zone);
-
-	if (snset) {
-		dns_master_initrawheader(&header);
-		header.flags = DNS_MASTERRAW_SOURCESERIALSET;
-		header.sourceserial = serialnum;
-		dns_zone_setrawdata(zone, &header);
-	}
-
-	if (result == ISC_R_SUCCESS && dumpzone) {
-		if (logdump) {
-			fprintf(errout, "dump zone to %s...", output_filename);
-			fflush(errout);
-		}
-		result = dump_zone(origin, zone, output_filename,
-				   outputformat, outputstyle, rawversion);
-		if (logdump)
-			fprintf(errout, "done\n");
-	}
-
+	result = setup(origin, filename, classname);
 	if (!quiet && result == ISC_R_SUCCESS)
-		fprintf(errout, "OK\n");
+		fprintf(stdout, "OK\n");
 	destroy();
 	if (lctx != NULL)
 		isc_log_destroy(&lctx);
-	isc_hash_destroy();
-	isc_entropy_detach(&ectx);
 	isc_mem_destroy(&mctx);
-#ifdef _WIN32
-	DestroySockets();
-#endif
 	return ((result == ISC_R_SUCCESS) ? 0 : 1);
 }

bin/check/named-checkzone.docbook

@@ -1,27 +1,26 @@
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 <!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2001, 2002  Internet Software Consortium.
  -
- - Permission to use, copy, modify, and/or distribute this software for any
+ - Permission to use, copy, modify, and distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
  - copyright notice and this permission notice appear in all copies.
  -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ - DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ - INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ - FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ - NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ - WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkzone">
-  <info>
-    <date>2013-04-29</date>
-  </info>
+<!-- $Id: named-checkzone.docbook,v 1.3.2.2 2002/08/05 06:57:01 marka Exp $ -->
+
+<refentry>
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>June 13, 2000</date>
   </refentryinfo>
 
   <refmeta>
@@ -30,471 +29,137 @@
     <refmiscinfo>BIND9</refmiscinfo>
   </refmeta>
 
-  <docinfo>
-    <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
-      <year>2004</year>
-      <year>2005</year>
-      <year>2006</year>
-      <year>2007</year>
-      <year>2009</year>
-      <year>2010</year>
-      <year>2011</year>
-      <year>2013</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
-      <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
-    </copyright>
-  </docinfo>
-
   <refnamediv>
     <refname><application>named-checkzone</application></refname>
-    <refname><application>named-compilezone</application></refname>
-    <refpurpose>zone file validity checking or converting tool</refpurpose>
+    <refpurpose>zone file validity checking tool</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-checkzone</command>
-      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-M <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-S <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">zonename</arg>
-      <arg choice="req" rep="norepeat">filename</arg>
-    </cmdsynopsis>
-    <cmdsynopsis sepchar=" ">
-      <command>named-compilezone</command>
-      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-C <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">zonename</arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-d</option></arg>
+      <arg><option>-j</option></arg>
+      <arg><option>-q</option></arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg choice="req">zonename</arg>
+      <arg choice="req">filename</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
-    <para><command>named-checkzone</command>
-      checks the syntax and integrity of a zone file.  It performs the
-      same checks as <command>named</command> does when loading a
-      zone.  This makes <command>named-checkzone</command> useful for
-      checking zone files before configuring them into a name server.
-    </para>
+  <refsect1>
+    <title>DESCRIPTION</title>
     <para>
-        <command>named-compilezone</command> is similar to
-	<command>named-checkzone</command>, but it always dumps the
-        zone contents to a specified file in a specified format.
-	Additionally, it applies stricter check levels by default,
-        since the dump output will be used as an actual zone file
-	loaded by <command>named</command>.
-	When manually specified otherwise, the check levels must at
-        least be as strict as those specified in the
-	<command>named</command> configuration file.
-     </para>
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
+        <command>named-checkzone</command> checks the syntax and integrity of
+	a zone file.  It performs the same checks as <command>named</command>
+	does when loading a zone.  This makes
+	<command>named-checkzone</command> useful for checking zone
+	files before configuring them into a name server.
+    </para>
+  </refsect1>
 
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
         <term>-d</term>
-        <listitem>
-          <para>
-            Enable debugging.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-h</term>
-        <listitem>
-          <para>
-            Print the usage summary and exit.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	      Enable debugging.
+	  </para>
+	</listitem>
       </varlistentry>
 
       <varlistentry>
         <term>-q</term>
-        <listitem>
-          <para>
-            Quiet mode - exit code only.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	      Quiet mode - exit code only.
+	  </para>
+	</listitem>
       </varlistentry>
 
       <varlistentry>
         <term>-v</term>
-        <listitem>
-          <para>
-            Print the version of the <command>named-checkzone</command>
-            program and exit.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	      Print the version of the <command>named-checkzone</command>
+	      program and exit.
+	  </para>
+	</listitem>
       </varlistentry>
 
       <varlistentry>
         <term>-j</term>
         <listitem>
           <para>
-            When loading the zone file read the journal if it exists.
-          </para>
+              When loading the zone file read the journal if it exists.
+          </para>   
         </listitem>
-      </varlistentry>
 
       <varlistentry>
         <term>-c <replaceable class="parameter">class</replaceable></term>
-        <listitem>
-          <para>
-            Specify the class of the zone.  If not specified, "IN" is assumed.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-i <replaceable class="parameter">mode</replaceable></term>
 	<listitem>
 	  <para>
-	      Perform post-load zone integrity checks.  Possible modes are
-	      <command>"full"</command> (default),
-	      <command>"full-sibling"</command>,
-	      <command>"local"</command>,
-	      <command>"local-sibling"</command> and
-	      <command>"none"</command>.
-	  </para>
-	  <para>
-	      Mode <command>"full"</command> checks that MX records
-	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <command>"local"</command> only
-	      checks MX records which refer to in-zone hostnames.
-	  </para>
-	  <para>
-	      Mode <command>"full"</command> checks that SRV records
-	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <command>"local"</command> only
-	      checks SRV records which refer to in-zone hostnames.
-	  </para>
-	  <para>
-	      Mode <command>"full"</command> checks that delegation NS
-	      records refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  It also checks that glue address records
-	      in the zone match those advertised by the child.
-	      Mode <command>"local"</command> only checks NS records which
-	      refer to in-zone hostnames or that some required glue exists,
-	      that is when the nameserver is in a child zone.
-	  </para>
-	  <para>
-	      Mode <command>"full-sibling"</command> and
-	      <command>"local-sibling"</command> disable sibling glue
-	      checks but are otherwise the same as <command>"full"</command>
-	      and <command>"local"</command> respectively.
-	  </para>
-	  <para>
-	      Mode <command>"none"</command> disables the checks.
+	      Specify the class of the zone.  If not specified "IN" is assumed.
 	  </para>
 	</listitem>
       </varlistentry>
 
-      <varlistentry>
-	<term>-f <replaceable class="parameter">format</replaceable></term>
-	<listitem>
-	  <para>
-	    Specify the format of the zone file.
-	    Possible formats are <command>"text"</command> (default)
-	    and <command>"raw"</command>.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-F <replaceable class="parameter">format</replaceable></term>
-	<listitem>
-	  <para>
-	    Specify the format of the output file specified.
-	    For <command>named-checkzone</command>,
-	    this does not cause any effects unless it dumps the zone
-	    contents.
-	  </para>
-	  <para>
-	    Possible formats are <command>"text"</command> (default)
-	    and <command>"raw"</command> or <command>"raw=N"</command>,
-            which store the zone in a binary format for rapid loading
-            by <command>named</command>.  <command>"raw=N"</command>
-            specifies the format version of the raw zone file: if N
-            is 0, the raw file can be read by any version of
-            <command>named</command>; if N is 1, the file can be read
-            by release 9.9.0 or higher.  The default is 1.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-k <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-          <para>
-            Perform <command>"check-names"</command> checks with the
-	    specified failure mode.
-            Possible modes are <command>"fail"</command>
-	    (default for <command>named-compilezone</command>),
-            <command>"warn"</command>
-	    (default for <command>named-checkzone</command>) and
-            <command>"ignore"</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-L <replaceable class="parameter">serial</replaceable></term>
-        <listitem>
-          <para>
-            When compiling a zone to 'raw' format, set the "source serial"
-            value in the header to the specified serial number.  (This is
-            expected to be used primarily for testing purposes.)
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-m <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-          <para>
-            Specify whether MX records should be checked to see if they
-            are addresses.  Possible modes are <command>"fail"</command>,
-            <command>"warn"</command> (default) and
-            <command>"ignore"</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-M <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-	  <para>
-	    Check if a MX record refers to a CNAME.
-            Possible modes are <command>"fail"</command>,
-            <command>"warn"</command> (default) and
-            <command>"ignore"</command>.
-	  </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-n <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-          <para>
-            Specify whether NS records should be checked to see if they
-            are addresses.
-	    Possible modes are <command>"fail"</command>
-	    (default for <command>named-compilezone</command>),
-            <command>"warn"</command>
-	    (default for <command>named-checkzone</command>) and
-            <command>"ignore"</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-o <replaceable class="parameter">filename</replaceable></term>
-        <listitem>
-          <para>
-            Write zone output to <filename>filename</filename>.
-	    If <filename>filename</filename> is <filename>-</filename> then
-	    write to standard out.
-	    This is mandatory for <command>named-compilezone</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-r <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-	  <para>
-            Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.
-            Possible modes are <command>"fail"</command>,
-            <command>"warn"</command> (default) and
-            <command>"ignore"</command>.
-	  </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-s <replaceable class="parameter">style</replaceable></term>
-	<listitem>
-	  <para>
-	    Specify the style of the dumped zone file.
-	    Possible styles are <command>"full"</command> (default)
-	    and <command>"relative"</command>.
-	    The full format is most suitable for processing
-	    automatically by a separate script.
-	    On the other hand, the relative format is more
-	    human-readable and is thus suitable for editing by hand.
-	    For <command>named-checkzone</command>
-	    this does not cause any effects unless it dumps the zone
-	    contents.
-	    It also does not have any meaning if the output format
-	    is not text.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-S <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-	  <para>
-	    Check if a SRV record refers to a CNAME.
-            Possible modes are <command>"fail"</command>,
-            <command>"warn"</command> (default) and
-            <command>"ignore"</command>.
-	  </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-t <replaceable class="parameter">directory</replaceable></term>
-        <listitem>
-          <para>
-            Chroot to <filename>directory</filename> so that
-            include
-            directives in the configuration file are processed as if
-            run by a similarly chrooted named.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-T <replaceable class="parameter">mode</replaceable></term>
-	<listitem>
-	  <para>
-	    Check if Sender Policy Framework (SPF) records exist
-	    and issues a warning if an SPF-formatted TXT record is
-	    not also present.  Possible modes are <command>"warn"</command>
-	    (default), <command>"ignore"</command>.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-w <replaceable class="parameter">directory</replaceable></term>
-        <listitem>
-          <para>
-            chdir to <filename>directory</filename> so that
-            relative
-            filenames in master file $INCLUDE directives work.  This
-            is similar to the directory clause in
-            <filename>named.conf</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-D</term>
-        <listitem>
-          <para>
-            Dump zone file in canonical format.
-	    This is always enabled for <command>named-compilezone</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-W <replaceable class="parameter">mode</replaceable></term>
-        <listitem>
-          <para>
-            Specify whether to check for non-terminal wildcards.
-            Non-terminal wildcards are almost always the result of a
-            failure to understand the wildcard matching algorithm (RFC 1034).
-            Possible modes are <command>"warn"</command> (default)
-            and
-            <command>"ignore"</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>zonename</term>
-        <listitem>
-          <para>
-            The domain name of the zone being checked.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	       The domain name of the zone being checked.
+	  </para>
+	</listitem>
       </varlistentry>
 
       <varlistentry>
         <term>filename</term>
-        <listitem>
-          <para>
-            The name of the zone file.
-          </para>
-        </listitem>
+	<listitem>
+	  <para>
+	       The name of the zone file.
+	  </para>
+	</listitem>
       </varlistentry>
 
     </variablelist>
 
-  </refsection>
+  </refsect1>
 
-  <refsection><info><title>RETURN VALUES</title></info>
+  <refsect1>
+    <title>RETURN VALUES</title>
+    <para>
+        <command>named-checkzone</command> returns an exit status of 1 if
+	errors were detected and 0 otherwise.
+  </refsect1>
 
-    <para><command>named-checkzone</command>
-      returns an exit status of 1 if
-      errors were detected and 0 otherwise.
-    </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
-
-    <para><citerefentry>
-        <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
+  <refsect1>
+    <title>SEE ALSO</title>
+    <para>
       <citerefentry>
-        <refentrytitle>named-checkconf</refentrytitle><manvolnum>8</manvolnum>
+        <refentrytitle>named</refentrytitle>
+	<manvolnum>8</manvolnum>
       </citerefentry>,
       <citetitle>RFC 1035</citetitle>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
+  </refsect1>
+
+  <refsect1>
+    <title>AUTHOR</title>
+    <para>
+        <corpauthor>Internet Software Consortium</corpauthor>
+    </para>
+  </refsect1>
 
 </refentry>
+
+<!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->
+

bin/check/named-checkzone.html

@@ -1,412 +1,234 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2000-2002, 2004-2007, 2009-2011, 2013-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000, 2001  Internet Software Consortium.
  - 
- - Permission to use, copy, modify, and/or distribute this software for any
+ - Permission to use, copy, modify, and distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
  - copyright notice and this permission notice appear in all copies.
  - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
+ - THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ - DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ - INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ - FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ - NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ - WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title>named-checkzone</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
-</head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
-<a name="man.named-checkzone"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  
-
-  <div class="refnamediv">
-<h2>Name</h2>
-<p>
-    <span class="application">named-checkzone</span>, 
-    <span class="application">named-compilezone</span>
-     &#8212; zone file validity checking or converting tool
-  </p>
-</div>
-
-  <div class="refsynopsisdiv">
-<h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-checkzone</code> 
-       [<code class="option">-d</code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-j</code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-v</code>]
-       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
-       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-M <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
-       [<code class="option">-o <em class="replaceable"><code>filename</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
-       [<code class="option">-S <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-D</code>]
-       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
-       {zonename}
-       {filename}
-    </p></div>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-compilezone</code> 
-       [<code class="option">-d</code>]
-       [<code class="option">-j</code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-v</code>]
-       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
-       [<code class="option">-C <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-D</code>]
-       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
-       {<code class="option">-o <em class="replaceable"><code>filename</code></em></code>}
-       {zonename}
-       {filename}
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>named-checkzone</strong></span>
-      checks the syntax and integrity of a zone file.  It performs the
-      same checks as <span class="command"><strong>named</strong></span> does when loading a
-      zone.  This makes <span class="command"><strong>named-checkzone</strong></span> useful for
-      checking zone files before configuring them into a name server.
-    </p>
-    <p>
-        <span class="command"><strong>named-compilezone</strong></span> is similar to
-	<span class="command"><strong>named-checkzone</strong></span>, but it always dumps the
-        zone contents to a specified file in a specified format.
-	Additionally, it applies stricter check levels by default,
-        since the dump output will be used as an actual zone file
-	loaded by <span class="command"><strong>named</strong></span>.
-	When manually specified otherwise, the check levels must at
-        least be as strict as those specified in the
-	<span class="command"><strong>named</strong></span> configuration file.
-     </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
-<dt><span class="term">-d</span></dt>
-<dd>
-          <p>
-            Enable debugging.
-          </p>
-        </dd>
-<dt><span class="term">-h</span></dt>
-<dd>
-          <p>
-            Print the usage summary and exit.
-          </p>
-        </dd>
-<dt><span class="term">-q</span></dt>
-<dd>
-          <p>
-            Quiet mode - exit code only.
-          </p>
-        </dd>
-<dt><span class="term">-v</span></dt>
-<dd>
-          <p>
-            Print the version of the <span class="command"><strong>named-checkzone</strong></span>
-            program and exit.
-          </p>
-        </dd>
-<dt><span class="term">-j</span></dt>
-<dd>
-          <p>
-            When loading the zone file read the journal if it exists.
-          </p>
-        </dd>
-<dt><span class="term">-c <em class="replaceable"><code>class</code></em></span></dt>
-<dd>
-          <p>
-            Specify the class of the zone.  If not specified, "IN" is assumed.
-          </p>
-        </dd>
-<dt><span class="term">-i <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-	      Perform post-load zone integrity checks.  Possible modes are
-	      <span class="command"><strong>"full"</strong></span> (default),
-	      <span class="command"><strong>"full-sibling"</strong></span>,
-	      <span class="command"><strong>"local"</strong></span>,
-	      <span class="command"><strong>"local-sibling"</strong></span> and
-	      <span class="command"><strong>"none"</strong></span>.
-	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that MX records
-	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
-	      checks MX records which refer to in-zone hostnames.
-	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that SRV records
-	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
-	      checks SRV records which refer to in-zone hostnames.
-	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that delegation NS
-	      records refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  It also checks that glue address records
-	      in the zone match those advertised by the child.
-	      Mode <span class="command"><strong>"local"</strong></span> only checks NS records which
-	      refer to in-zone hostnames or that some required glue exists,
-	      that is when the nameserver is in a child zone.
-	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full-sibling"</strong></span> and
-	      <span class="command"><strong>"local-sibling"</strong></span> disable sibling glue
-	      checks but are otherwise the same as <span class="command"><strong>"full"</strong></span>
-	      and <span class="command"><strong>"local"</strong></span> respectively.
-	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"none"</strong></span> disables the checks.
-	  </p>
-	</dd>
-<dt><span class="term">-f <em class="replaceable"><code>format</code></em></span></dt>
-<dd>
-	  <p>
-	    Specify the format of the zone file.
-	    Possible formats are <span class="command"><strong>"text"</strong></span> (default)
-	    and <span class="command"><strong>"raw"</strong></span>.
-	  </p>
-	</dd>
-<dt><span class="term">-F <em class="replaceable"><code>format</code></em></span></dt>
-<dd>
-	  <p>
-	    Specify the format of the output file specified.
-	    For <span class="command"><strong>named-checkzone</strong></span>,
-	    this does not cause any effects unless it dumps the zone
-	    contents.
-	  </p>
-	  <p>
-	    Possible formats are <span class="command"><strong>"text"</strong></span> (default)
-	    and <span class="command"><strong>"raw"</strong></span> or <span class="command"><strong>"raw=N"</strong></span>,
-            which store the zone in a binary format for rapid loading
-            by <span class="command"><strong>named</strong></span>.  <span class="command"><strong>"raw=N"</strong></span>
-            specifies the format version of the raw zone file: if N
-            is 0, the raw file can be read by any version of
-            <span class="command"><strong>named</strong></span>; if N is 1, the file can be read
-            by release 9.9.0 or higher.  The default is 1.
-	  </p>
-	</dd>
-<dt><span class="term">-k <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
-            Perform <span class="command"><strong>"check-names"</strong></span> checks with the
-	    specified failure mode.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>
-	    (default for <span class="command"><strong>named-compilezone</strong></span>),
-            <span class="command"><strong>"warn"</strong></span>
-	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-L <em class="replaceable"><code>serial</code></em></span></dt>
-<dd>
-          <p>
-            When compiling a zone to 'raw' format, set the "source serial"
-            value in the header to the specified serial number.  (This is
-            expected to be used primarily for testing purposes.)
-          </p>
-        </dd>
-<dt><span class="term">-m <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
-            Specify whether MX records should be checked to see if they
-            are addresses.  Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-M <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-	    Check if a MX record refers to a CNAME.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
-<dt><span class="term">-n <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
-            Specify whether NS records should be checked to see if they
-            are addresses.
-	    Possible modes are <span class="command"><strong>"fail"</strong></span>
-	    (default for <span class="command"><strong>named-compilezone</strong></span>),
-            <span class="command"><strong>"warn"</strong></span>
-	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-o <em class="replaceable"><code>filename</code></em></span></dt>
-<dd>
-          <p>
-            Write zone output to <code class="filename">filename</code>.
-	    If <code class="filename">filename</code> is <code class="filename">-</code> then
-	    write to standard out.
-	    This is mandatory for <span class="command"><strong>named-compilezone</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-r <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-            Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
-<dt><span class="term">-s <em class="replaceable"><code>style</code></em></span></dt>
-<dd>
-	  <p>
-	    Specify the style of the dumped zone file.
-	    Possible styles are <span class="command"><strong>"full"</strong></span> (default)
-	    and <span class="command"><strong>"relative"</strong></span>.
-	    The full format is most suitable for processing
-	    automatically by a separate script.
-	    On the other hand, the relative format is more
-	    human-readable and is thus suitable for editing by hand.
-	    For <span class="command"><strong>named-checkzone</strong></span>
-	    this does not cause any effects unless it dumps the zone
-	    contents.
-	    It also does not have any meaning if the output format
-	    is not text.
-	  </p>
-	</dd>
-<dt><span class="term">-S <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-	    Check if a SRV record refers to a CNAME.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
-<dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
-            Chroot to <code class="filename">directory</code> so that
-            include
-            directives in the configuration file are processed as if
-            run by a similarly chrooted named.
-          </p>
-        </dd>
-<dt><span class="term">-T <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-	    Check if Sender Policy Framework (SPF) records exist
-	    and issues a warning if an SPF-formatted TXT record is
-	    not also present.  Possible modes are <span class="command"><strong>"warn"</strong></span>
-	    (default), <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-	</dd>
-<dt><span class="term">-w <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
-            chdir to <code class="filename">directory</code> so that
-            relative
-            filenames in master file $INCLUDE directives work.  This
-            is similar to the directory clause in
-            <code class="filename">named.conf</code>.
-          </p>
-        </dd>
-<dt><span class="term">-D</span></dt>
-<dd>
-          <p>
-            Dump zone file in canonical format.
-	    This is always enabled for <span class="command"><strong>named-compilezone</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-W <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
-            Specify whether to check for non-terminal wildcards.
-            Non-terminal wildcards are almost always the result of a
-            failure to understand the wildcard matching algorithm (RFC 1034).
-            Possible modes are <span class="command"><strong>"warn"</strong></span> (default)
-            and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">zonename</span></dt>
-<dd>
-          <p>
-            The domain name of the zone being checked.
-          </p>
-        </dd>
-<dt><span class="term">filename</span></dt>
-<dd>
-          <p>
-            The name of the zone file.
-          </p>
-        </dd>
-</dl></div>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>RETURN VALUES</h2>
-
-    <p><span class="command"><strong>named-checkzone</strong></span>
-      returns an exit status of 1 if
-      errors were detected and 0 otherwise.
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named-checkconf</span>(8)
-      </span>,
-      <em class="citetitle">RFC 1035</em>,
-      <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
-    </p>
-  </div>
-
-</div></body>
-</html>
+<HTML
+><HEAD
+><TITLE
+>named-checkzone</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.73
+"></HEAD
+><BODY
+CLASS="REFENTRY"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><H1
+><A
+NAME="AEN1"
+><SPAN
+CLASS="APPLICATION"
+>named-checkzone</SPAN
+></A
+></H1
+><DIV
+CLASS="REFNAMEDIV"
+><A
+NAME="AEN9"
+></A
+><H2
+>Name</H2
+><SPAN
+CLASS="APPLICATION"
+>named-checkzone</SPAN
+>&nbsp;--&nbsp;zone file validity checking tool</DIV
+><DIV
+CLASS="REFSYNOPSISDIV"
+><A
+NAME="AEN13"
+></A
+><H2
+>Synopsis</H2
+><P
+><B
+CLASS="COMMAND"
+>named-checkzone</B
+>  [<TT
+CLASS="OPTION"
+>-d</TT
+>] [<TT
+CLASS="OPTION"
+>-j</TT
+>] [<TT
+CLASS="OPTION"
+>-q</TT
+>] [<TT
+CLASS="OPTION"
+>-v</TT
+>] [<TT
+CLASS="OPTION"
+>-c <TT
+CLASS="REPLACEABLE"
+><I
+>class</I
+></TT
+></TT
+>] {zonename} {filename}</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN29"
+></A
+><H2
+>DESCRIPTION</H2
+><P
+>        <B
+CLASS="COMMAND"
+>named-checkzone</B
+> checks the syntax and integrity of
+	a zone file.  It performs the same checks as <B
+CLASS="COMMAND"
+>named</B
+>
+	does when loading a zone.  This makes
+	<B
+CLASS="COMMAND"
+>named-checkzone</B
+> useful for checking zone
+	files before configuring them into a name server.
+    </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN35"
+></A
+><H2
+>OPTIONS</H2
+><P
+></P
+><DIV
+CLASS="VARIABLELIST"
+><DL
+><DT
+>-d</DT
+><DD
+><P
+>	      Enable debugging.
+	  </P
+></DD
+><DT
+>-q</DT
+><DD
+><P
+>	      Quiet mode - exit code only.
+	  </P
+></DD
+><DT
+>-v</DT
+><DD
+><P
+>	      Print the version of the <B
+CLASS="COMMAND"
+>named-checkzone</B
+>
+	      program and exit.
+	  </P
+></DD
+><DT
+>-j</DT
+><DD
+><P
+>              When loading the zone file read the journal if it exists.
+          </P
+></DD
+><DT
+>-c <TT
+CLASS="REPLACEABLE"
+><I
+>class</I
+></TT
+></DT
+><DD
+><P
+>	      Specify the class of the zone.  If not specified "IN" is assumed.
+	  </P
+></DD
+><DT
+>zonename</DT
+><DD
+><P
+>	       The domain name of the zone being checked.
+	  </P
+></DD
+><DT
+>filename</DT
+><DD
+><P
+>	       The name of the zone file.
+	  </P
+></DD
+></DL
+></DIV
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN68"
+></A
+><H2
+>RETURN VALUES</H2
+><P
+>        <B
+CLASS="COMMAND"
+>named-checkzone</B
+> returns an exit status of 1 if
+	errors were detected and 0 otherwise.
+  </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN72"
+></A
+><H2
+>SEE ALSO</H2
+><P
+>      <SPAN
+CLASS="CITEREFENTRY"
+><SPAN
+CLASS="REFENTRYTITLE"
+>named</SPAN
+>(8)</SPAN
+>,
+      <I
+CLASS="CITETITLE"
+>RFC 1035</I
+>,
+      <I
+CLASS="CITETITLE"
+>BIND 9 Administrator Reference Manual</I
+>.
+    </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN80"
+></A
+><H2
+>AUTHOR</H2
+><P
+>        Internet Software Consortium
+    </P
+></DIV
+></BODY
+></HTML
+>

bin/check/win32/checkconf.dsp.in

@@ -1,107 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checkconf" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=checkconf - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checkconf - @PLATFORM@ Release"
-# Name "checkconf - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkconf.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/checkconf.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "checkconf"=".\checkconf.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/checkconf.mak.in

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on checkconf.dsp
-!IF "$(CFG)" == ""
-CFG=checkconf - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to checkconf - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "checkconf - @PLATFORM@ Release" && "$(CFG)" != "checkconf - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - @PLATFORM@ Release" "libisccfg - @PLATFORM@ Release" "libisc - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - @PLATFORM@ ReleaseCLEAN" "libisccfg - @PLATFORM@ ReleaseCLEAN" "libdns - @PLATFORM@ ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(OUTDIR)\checkconf.bsc"
-	-@erase "..\..\..\Build\Release\named-checkconf.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\checkconf.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib  ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib"
-
-"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - @PLATFORM@ Debug" "libisccfg - @PLATFORM@ Debug" "libisc - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - @PLATFORM@ DebugCLEAN" "libisccfg - @PLATFORM@ DebugCLEAN" "libdns - @PLATFORM@ DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkconf.pdb"
-	-@erase "$(OUTDIR)\checkconf.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
-	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib  ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib"
-
-"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("checkconf.dep")
-!INCLUDE "checkconf.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "checkconf.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "checkconf - @PLATFORM@ Release" || "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-SOURCE="..\check-tool.c"
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE="..\named-checkconf.c"
-
-"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libisc - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libisc - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libisccfg - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libisccfg - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libdns - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libdns - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/check/win32/checkconf.vcxproj.filters.in

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkconf.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checkconf.vcxproj.in

@@ -1,115 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{03A96113-CB14-43AA-AEB2-48950E3915C5}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checkconf</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkconf.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checkconf.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/checktool.dsp.in

@@ -1,113 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checktool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
-
-CFG=checktool - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak" CFG="checktool - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checktool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE "checktool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checktool - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/checktool.lib"
-
-!ELSEIF  "$(CFG)" == "checktool - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug out:"Debug/checktool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checktool - @PLATFORM@ Release"
-# Name "checktool - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\check-tool.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/check/win32/checktool.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "checktool"=".\checktool.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/checktool.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\check-tool.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checktool.vcxproj.in

@@ -1,101 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\check-tool.c" />
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{2C1F7096-C5B5-48D4-846F-A7ACA454335D}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checktool</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <OutDir>.\$(Configuration)\</OutDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <OutDir>.\$(Configuration)\</OutDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Lib>
-      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-    </Lib>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Lib>
-      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-    </Lib>
-  </ItemDefinitionGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checktool.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/checkzone.dsp.in

@@ -1,108 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checkzone" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=checkzone - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" @COPTY@ /FD /c
-# SUBTRACT CPP /Fr
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checkzone - @PLATFORM@ Release"
-# Name "checkzone - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkzone.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/checkzone.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "checkzone"=".\checkzone.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/checkzone.mak.in

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on checkzone.dsp
-!IF "$(CFG)" == ""
-CFG=checkzone - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to checkzone - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "checkzone - @PLATFORM@ Release" && "$(CFG)" != "checkzone - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkzone.exe"
-
-!ELSE 
-
-ALL : "libisc - @PLATFORM@ Release" "libdns - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkzone.exe"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - @PLATFORM@ ReleaseCLEAN" "libisc - @PLATFORM@ ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\named-checkzone.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /Fp"$(INTDIR)\checkzone.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib"
-
-"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
-
-!ELSE 
-
-ALL : "libisc - @PLATFORM@ Debug" "libdns - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - @PLATFORM@ DebugCLEAN" "libisc - @PLATFORM@ DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\named-checkzone.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkzone.pdb"
-	-@erase "$(OUTDIR)\checkzone.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
-	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkzone.sbr"
-
-"$(OUTDIR)\checkzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib"
-
-"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("checkzone.dep")
-!INCLUDE "checkzone.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "checkzone.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "checkzone - @PLATFORM@ Release" || "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-SOURCE="..\check-tool.c"
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-
-"$(INTDIR)\check-tool.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE="..\named-checkzone.c"
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-
-"$(INTDIR)\named-checkzone.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-"libdns - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-"libdns - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-"libisc - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-"libisc - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/check/win32/checkzone.vcxproj.filters.in

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkzone.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checkzone.vcxproj.in

@@ -1,126 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{66028555-7DD5-4016-B601-9EF9A1EE8BFA}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checkzone</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y named-checkzone.exe named-compilezone.exe
-copy /Y named-checkzone.ilk named-compilezone.ilk
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y named-checkzone.exe named-compilezone.exe
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkzone.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checkzone.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/namedcheckconf.dsp

@@ -0,0 +1,111 @@
+# Microsoft Developer Studio Project File - Name="namedcheckconf" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=namedcheckconf - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkconf.exe"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "namedcheckconf - Win32 Release"
+# Name "namedcheckconf - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\check-tool.c"
+# End Source File
+# Begin Source File
+
+SOURCE="..\named-checkconf.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/namedcheckconf.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "namedcheckconf"=".\namedcheckconf.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/namedcheckconf.mak

@@ -0,0 +1,216 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckconf.dsp
+!IF "$(CFG)" == ""
+CFG=namedcheckconf - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to namedcheckconf - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "namedcheckconf - Win32 Release" && "$(CFG)" != "namedcheckconf - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+# Begin Custom Macros
+OutDir=.\Release
+# End Custom Macros
+
+ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\namedcheckconf.bsc"
+	-@erase "..\..\..\Build\Release\named-checkconf.exe"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MT /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\namedcheckconf.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" /machine:I386 /out:"../../../Build/Release/named-checkconf.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj"
+
+"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkconf.pdb"
+	-@erase "$(OUTDIR)\namedcheckconf.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
+	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MTd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj"
+
+"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+!ENDIF 
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("namedcheckconf.dep")
+!INCLUDE "namedcheckconf.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "namedcheckconf.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "namedcheckconf - Win32 Release" || "$(CFG)" == "namedcheckconf - Win32 Debug"
+SOURCE="..\check-tool.c"
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+SOURCE="..\named-checkconf.c"
+
+"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+
+!ENDIF 
+

bin/check/win32/namedcheckzone.dsp

@@ -0,0 +1,111 @@
+# Microsoft Developer Studio Project File - Name="namedcheckzone" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=namedcheckzone - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkzone.exe"
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "namedcheckzone - Win32 Release"
+# Name "namedcheckzone - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\check-tool.c"
+# End Source File
+# Begin Source File
+
+SOURCE="..\named-checkzone.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/namedcheckzone.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "namedcheckzone"=".\namedcheckzone.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/namedcheckzone.mak

@@ -0,0 +1,216 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckzone.dsp
+!IF "$(CFG)" == ""
+CFG=namedcheckzone - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to namedcheckzone - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "namedcheckzone - Win32 Release" && "$(CFG)" != "namedcheckzone - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+# Begin Custom Macros
+OutDir=.\Release
+# End Custom Macros
+
+ALL : "..\..\..\Build\Release\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\named-checkzone.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\namedcheckzone.bsc"
+	-@erase "..\..\..\Build\Release\named-checkzone.exe"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MT /W3 /GX /O2 /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\namedcheckzone.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkzone.sbr"
+
+"$(OUTDIR)\namedcheckzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" /machine:I386 /out:"../../../Build/Release/named-checkzone.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj"
+
+"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\named-checkzone.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkzone.pdb"
+	-@erase "$(OUTDIR)\namedcheckzone.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
+	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MTd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkzone.sbr"
+
+"$(OUTDIR)\namedcheckzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj"
+
+"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+!ENDIF 
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("namedcheckzone.dep")
+!INCLUDE "namedcheckzone.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "namedcheckzone.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "namedcheckzone - Win32 Release" || "$(CFG)" == "namedcheckzone - Win32 Debug"
+SOURCE="..\check-tool.c"
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+SOURCE="..\named-checkzone.c"
+
+"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+
+!ENDIF 
+

bin/confgen/.gitignore

@@ -1,2 +0,0 @@
-ddns-confgen
-rndc-confgen

bin/confgen/Makefile.in

@@ -1,113 +0,0 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-
-# $Id: Makefile.in,v 1.8 2009/12/05 23:31:40 each Exp $
-
-srcdir =	@srcdir@
-VPATH =		@srcdir@
-top_srcdir =	@top_srcdir@
-
-# Attempt to disable parallel processing.
-.NOTPARALLEL:
-.NO_PARALLEL:
-
-VERSION=@BIND9_VERSION@
-
-@BIND9_MAKE_INCLUDES@
-
-CINCLUDES = -I${srcdir}/include ${ISC_INCLUDES} ${ISCCC_INCLUDES} \
-	${ISCCFG_INCLUDES} ${DNS_INCLUDES} ${BIND9_INCLUDES}
-
-CDEFINES =
-CWARNINGS =
-
-ISCCFGLIBS =	../../lib/isccfg/libisccfg.@A@
-ISCCCLIBS =	../../lib/isccc/libisccc.@A@
-ISCLIBS =	../../lib/isc/libisc.@A@
-ISCNOSYMLIBS =	../../lib/isc/libisc-nosymtbl.@A@
-DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
-BIND9LIBS =	../../lib/bind9/libbind9.@A@
-
-ISCCFGDEPLIBS =	../../lib/isccfg/libisccfg.@A@
-ISCCCDEPLIBS =	../../lib/isccc/libisccc.@A@
-ISCDEPLIBS =	../../lib/isc/libisc.@A@
-DNSDEPLIBS =	../../lib/dns/libdns.@A@
-BIND9DEPLIBS =	../../lib/bind9/libbind9.@A@
-
-RNDCLIBS =	${ISCCFGLIBS} ${ISCCCLIBS} ${BIND9LIBS} ${DNSLIBS} ${ISCLIBS} @LIBS@
-RNDCDEPLIBS =	${ISCCFGDEPLIBS} ${ISCCCDEPLIBS} ${BIND9DEPLIBS} ${DNSDEPLIBS} ${ISCDEPLIBS}
-
-LIBS =		${DNSLIBS} ${ISCLIBS} @LIBS@
-
-NOSYMLIBS =	${DNSLIBS} ${ISCNOSYMLIBS} @LIBS@
-
-CONFDEPLIBS =	${DNSDEPLIBS} ${ISCDEPLIBS}
-
-SRCS=		rndc-confgen.c ddns-confgen.c
-
-SUBDIRS =	unix
-
-TARGETS =	rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@
-
-MANPAGES =	rndc-confgen.8 ddns-confgen.8
-
-HTMLPAGES =	rndc-confgen.html ddns-confgen.html
-
-MANOBJS =	${MANPAGES} ${HTMLPAGES}
-
-UOBJS =		unix/os.@O@
-
-@BIND9_MAKE_RULES@
-
-rndc-confgen.@O@: rndc-confgen.c
-	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} \
-		-DRNDC_KEYFILE=\"${sysconfdir}/rndc.key\" \
-		-c ${srcdir}/rndc-confgen.c
-
-ddns-confgen.@O@: ddns-confgen.c
-	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} -c ${srcdir}/ddns-confgen.c
-
-rndc-confgen@EXEEXT@: rndc-confgen.@O@ util.@O@ keygen.@O@ ${CONFDEPLIBS}
-	export BASEOBJS="rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
-	${FINALBUILDCMD}
-
-ddns-confgen@EXEEXT@: ddns-confgen.@O@ util.@O@ keygen.@O@ ${CONFDEPLIBS}
-	export BASEOBJS="ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
-	${FINALBUILDCMD}
-
-doc man:: ${MANOBJS}
-
-docclean manclean maintainer-clean::
-	rm -f ${MANOBJS}
-
-installdirs:
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${sbindir}
-	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man8
-
-install:: rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@ installdirs
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} rndc-confgen@EXEEXT@ ${DESTDIR}${sbindir}
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} ddns-confgen@EXEEXT@ ${DESTDIR}${sbindir}
-	${INSTALL_DATA} ${srcdir}/rndc-confgen.8 ${DESTDIR}${mandir}/man8
-	${INSTALL_DATA} ${srcdir}/ddns-confgen.8 ${DESTDIR}${mandir}/man8
-
-uninstall::
-	rm -f ${DESTDIR}${mandir}/man8/tsig-keygen.8
-	rm -f ${DESTDIR}${sbindir}/tsig-keygen@EXEEXT@
-	rm -f ${DESTDIR}${mandir}/man8/ddns-confgen.8
-	rm -f ${DESTDIR}${mandir}/man8/rndc-confgen.8
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/ddns-confgen@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/rndc-confgen@EXEEXT@
-
-clean distclean maintainer-clean::
-	rm -f ${TARGETS}

bin/confgen/ddns-confgen.8

@@ -1,159 +0,0 @@
-.\" Copyright (C) 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
-.\" purpose with or without fee is hereby granted, provided that the above
-.\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
-.\"
-.hy 0
-.ad l
-'\" t
-.\"     Title: ddns-confgen
-.\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2009-09-18
-.\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
-.\"
-.TH "DDNS\-CONFGEN" "8" "2009\-09\-18" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
-.SH "NAME"
-ddns-confgen \- ddns key generation tool
-.SH "SYNOPSIS"
-.HP \w'\fBddns\-confgen\fR\ 'u
-\fBddns\-confgen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\-s\ \fIname\fR | \-z\ \fIzone\fR] [\fB\-q\fR] [name]
-.SH "DESCRIPTION"
-.PP
-\fBddns\-confgen\fR
-generates a key for use by
-\fBnsupdate\fR
-and
-\fBnamed\fR\&. It simplifies configuration of dynamic zones by generating a key and providing the
-\fBnsupdate\fR
-and
-\fBnamed\&.conf\fR
-syntax that will be needed to use it, including an example
-\fBupdate\-policy\fR
-statement\&.
-.PP
-If a domain name is specified on the command line, it will be used in the name of the generated key and in the sample
-\fBnamed\&.conf\fR
-syntax\&. For example,
-\fBddns\-confgen example\&.com\fR
-would generate a key called "ddns\-key\&.example\&.com", and sample
-\fBnamed\&.conf\fR
-command that could be used in the zone definition for "example\&.com"\&.
-.PP
-Note that
-\fBnamed\fR
-itself can configure a local DDNS key for use with
-\fBnsupdate \-l\fR\&.
-\fBddns\-confgen\fR
-is only needed when a more elaborate configuration is required: for instance, if
-\fBnsupdate\fR
-is to be used from a remote system\&.
-.SH "OPTIONS"
-.PP
-\-a \fIalgorithm\fR
-.RS 4
-Specifies the algorithm to use for the TSIG key\&. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512\&. The default is hmac\-sha256\&.
-.RE
-.PP
-\-h
-.RS 4
-Prints a short summary of the options and arguments to
-\fBddns\-confgen\fR\&.
-.RE
-.PP
-\-k \fIkeyname\fR
-.RS 4
-Specifies the key name of the DDNS authentication key\&. The default is
-\fBddns\-key\fR
-when neither the
-\fB\-s\fR
-nor
-\fB\-z\fR
-option is specified; otherwise, the default is
-\fBddns\-key\fR
-as a separate label followed by the argument of the option, e\&.g\&.,
-\fBddns\-key\&.example\&.com\&.\fR
-The key name must have the format of a valid domain name, consisting of letters, digits, hyphens and periods\&.
-.RE
-.PP
-\-q
-.RS 4
-Quiet mode: Print only the key, with no explanatory text or usage examples\&.
-.RE
-.PP
-\-r \fIrandomfile\fR
-.RS 4
-Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
-/dev/random
-or equivalent device, the default source of randomness is keyboard input\&.
-randomdev
-specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
-keyboard
-indicates that keyboard input should be used\&.
-.RE
-.PP
-\-s \fIname\fR
-.RS 4
-Single host mode: The example
-\fBnamed\&.conf\fR
-text shows how to set an update policy for the specified
-\fIname\fR
-using the "name" nametype\&. The default key name is ddns\-key\&.\fIname\fR\&. Note that the "self" nametype cannot be used, since the name to be updated may differ from the key name\&. This option cannot be used with the
-\fB\-z\fR
-option\&.
-.RE
-.PP
-\-z \fIzone\fR
-.RS 4
-zone mode: The example
-\fBnamed\&.conf\fR
-text shows how to set an update policy for the specified
-\fIzone\fR
-using the "zonesub" nametype, allowing updates to all subdomain names within that
-\fIzone\fR\&. This option cannot be used with the
-\fB\-s\fR
-option\&.
-.RE
-.SH "SEE ALSO"
-.PP
-\fBnsupdate\fR(1),
-\fBnamed.conf\fR(5),
-\fBnamed\fR(8),
-BIND 9 Administrator Reference Manual\&.
-.SH "AUTHOR"
-.PP
-\fBInternet Systems Consortium, Inc\&.\fR
-.SH "COPYRIGHT"
-.br
-Copyright \(co 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.br

bin/confgen/ddns-confgen.c

@@ -1,261 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: ddns-confgen.c,v 1.11 2011/03/12 04:59:46 tbox Exp $ */
-
-/*! \file */
-
-/**
- * ddns-confgen generates configuration files for dynamic DNS. It can
- * be used as a convenient alternative to writing the ddns.key file
- * and the corresponding key and update-policy statements in named.conf.
- */
-
-#include <config.h>
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include <isc/assertions.h>
-#include <isc/base64.h>
-#include <isc/buffer.h>
-#include <isc/commandline.h>
-#include <isc/entropy.h>
-#include <isc/file.h>
-#include <isc/keyboard.h>
-#include <isc/mem.h>
-#include <isc/net.h>
-#include <isc/print.h>
-#include <isc/result.h>
-#include <isc/string.h>
-#include <isc/time.h>
-#include <isc/util.h>
-
-#include <dns/keyvalues.h>
-#include <dns/name.h>
-#include <dns/result.h>
-
-#include <dst/dst.h>
-#include <confgen/os.h>
-
-#include "util.h"
-#include "keygen.h"
-
-#define DEFAULT_KEYNAME		"ddns-key"
-
-static char program[256];
-const char *progname;
-
-isc_boolean_t verbose = ISC_FALSE;
-
-ISC_PLATFORM_NORETURN_PRE static void
-usage(int status) ISC_PLATFORM_NORETURN_POST;
-
-static void
-usage(int status) {
-
-	fprintf(stderr, "\
-Usage:\n\
- %s [-a alg] [-k keyname] [-r randomfile] [-q] [-s name | -z zone]\n\
-  -a alg:        algorithm (default hmac-sha256)\n\
-  -k keyname:    name of the key as it will be used in named.conf\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n\
-  -s name:       domain name to be updated using the created key\n\
-  -z zone:       name of the zone as it will be used in named.conf\n\
-  -q:            quiet mode: print the key, with no explanatory text\n",
-		 progname);
-
-	exit (status);
-}
-
-int
-main(int argc, char **argv) {
-	isc_boolean_t show_final_mem = ISC_FALSE;
-	isc_boolean_t quiet = ISC_FALSE;
-	isc_buffer_t key_txtbuffer;
-	char key_txtsecret[256];
-	isc_mem_t *mctx = NULL;
-	isc_result_t result = ISC_R_SUCCESS;
-	const char *randomfile = NULL;
-	const char *keyname = NULL;
-	const char *zone = NULL;
-	const char *self_domain = NULL;
-	char *keybuf = NULL;
-	dns_secalg_t alg = DST_ALG_HMACSHA256;
-	const char *algname = alg_totext(alg);
-	int keysize = 256;
-	int len = 0;
-	int ch;
-
-	dns_result_register();
-
-	result = isc_file_progname(*argv, program, sizeof(program));
-	if (result != ISC_R_SUCCESS)
-		memmove(program, "ddns-confgen", 13);
-	progname = program;
-
-	isc_commandline_errprint = ISC_FALSE;
-
-	while ((ch = isc_commandline_parse(argc, argv,
-					   "a:hk:Mmr:qs:Vy:z:")) != -1) {
-		switch (ch) {
-		case 'a':
-			algname = isc_commandline_argument;
-			alg = alg_fromtext(algname);
-			if (alg == DST_ALG_UNKNOWN)
-				fatal("Unsupported algorithm '%s'", algname);
-			keysize = alg_bits(alg);
-			break;
-		case 'h':
-			usage(0);
-		case 'k':
-		case 'y':
-			keyname = isc_commandline_argument;
-			break;
-		case 'M':
-			isc_mem_debugging = ISC_MEM_DEBUGTRACE;
-			break;
-		case 'm':
-			show_final_mem = ISC_TRUE;
-			break;
-		case 'q':
-			quiet = ISC_TRUE;
-			break;
-		case 'r':
-			randomfile = isc_commandline_argument;
-			break;
-		case 's':
-			self_domain = isc_commandline_argument;
-			break;
-		case 'V':
-			verbose = ISC_TRUE;
-			break;
-		case 'z':
-			zone = isc_commandline_argument;
-			break;
-		case '?':
-			if (isc_commandline_option != '?') {
-				fprintf(stderr, "%s: invalid argument -%c\n",
-					program, isc_commandline_option);
-				usage(1);
-			} else
-				usage(0);
-			break;
-		default:
-			fprintf(stderr, "%s: unhandled option -%c\n",
-				program, isc_commandline_option);
-			exit(1);
-		}
-	}
-
-	argc -= isc_commandline_index;
-	argv += isc_commandline_index;
-	POST(argv);
-
-	if (self_domain != NULL && zone != NULL)
-		usage(1);	/* -s and -z cannot coexist */
-
-	if (argc > 0)
-		usage(1);
-
-	DO("create memory context", isc_mem_create(0, 0, &mctx));
-
-	if (keyname == NULL) {
-		const char *suffix = NULL;
-
-		keyname = DEFAULT_KEYNAME;
-		if (self_domain != NULL)
-			suffix = self_domain;
-		else if (zone != NULL)
-			suffix = zone;
-		if (suffix != NULL) {
-			len = strlen(keyname) + strlen(suffix) + 2;
-			keybuf = isc_mem_get(mctx, len);
-			if (keybuf == NULL)
-				fatal("failed to allocate memory for keyname");
-			snprintf(keybuf, len, "%s.%s", keyname, suffix);
-			keyname = (const char *) keybuf;
-		}
-	}
-
-	isc_buffer_init(&key_txtbuffer, &key_txtsecret, sizeof(key_txtsecret));
-
-	generate_key(mctx, randomfile, alg, keysize, &key_txtbuffer);
-
-
-	if (!quiet)
-		printf("\
-# To activate this key, place the following in named.conf, and\n\
-# in a separate keyfile on the system or systems from which nsupdate\n\
-# will be run:\n");
-
-	printf("\
-key \"%s\" {\n\
-	algorithm %s;\n\
-	secret \"%.*s\";\n\
-};\n",
-	       keyname, algname,
-	       (int)isc_buffer_usedlength(&key_txtbuffer),
-	       (char *)isc_buffer_base(&key_txtbuffer));
-
-	if (!quiet) {
-		if (self_domain != NULL) {
-			printf("\n\
-# Then, in the \"zone\" statement for the zone containing the\n\
-# name \"%s\", place an \"update-policy\" statement\n\
-# like this one, adjusted as needed for your preferred permissions:\n\
-update-policy {\n\
-	  grant %s name %s ANY;\n\
-};\n",
-			       self_domain, keyname, self_domain);
-		} else if (zone != NULL) {
-			printf("\n\
-# Then, in the \"zone\" definition statement for \"%s\",\n\
-# place an \"update-policy\" statement like this one, adjusted as \n\
-# needed for your preferred permissions:\n\
-update-policy {\n\
-	  grant %s zonesub ANY;\n\
-};\n",
-			       zone, keyname);
-		} else {
-			printf("\n\
-# Then, in the \"zone\" statement for each zone you wish to dynamically\n\
-# update, place an \"update-policy\" statement granting update permission\n\
-# to this key.  For example, the following statement grants this key\n\
-# permission to update any name within the zone:\n\
-update-policy {\n\
-	grant %s zonesub ANY;\n\
-};\n",
-			       keyname);
-		}
-
-		printf("\n\
-# After the keyfile has been placed, the following command will\n\
-# execute nsupdate using this key:\n\
-nsupdate -k <keyfile>\n");
-
-	}
-
-	if (keybuf != NULL)
-		isc_mem_put(mctx, keybuf, len);
-
-	if (show_final_mem)
-		isc_mem_stats(mctx, stderr);
-
-	isc_mem_destroy(&mctx);
-
-	return (0);
-}

bin/confgen/ddns-confgen.docbook

@@ -1,213 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.ddns-confgen">
-  <info>
-    <date>2009-09-18</date>
-  </info>
-  <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle><application>ddns-confgen</application></refentrytitle>
-    <manvolnum>8</manvolnum>
-    <refmiscinfo>BIND9</refmiscinfo>
-  </refmeta>
-
-  <refnamediv>
-    <refname><application>ddns-confgen</application></refname>
-    <refpurpose>ddns key generation tool</refpurpose>
-  </refnamediv>
-
-  <docinfo>
-    <copyright>
-      <year>2009</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
-      <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
-    </copyright>
-  </docinfo>
-
-  <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
-      <command>ddns-confgen</command>
-      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <group choice="opt" rep="norepeat">
-        <arg choice="plain" rep="norepeat">-s <replaceable class="parameter">name</replaceable></arg>
-        <arg choice="plain" rep="norepeat">-z <replaceable class="parameter">zone</replaceable></arg>
-      </group>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat">name</arg>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-
-  <refsection><info><title>DESCRIPTION</title></info>
-
-    <para><command>ddns-confgen</command>
-      generates a key for use by <command>nsupdate</command>
-      and <command>named</command>.  It simplifies configuration
-      of dynamic zones by generating a key and providing the
-      <command>nsupdate</command> and <command>named.conf</command>
-      syntax that will be needed to use it, including an example
-      <command>update-policy</command> statement.
-    </para>
-
-    <para>
-      If a domain name is specified on the command line, it will
-      be used in the name of the generated key and in the sample
-      <command>named.conf</command> syntax.  For example,
-      <command>ddns-confgen example.com</command> would
-      generate a key called "ddns-key.example.com", and sample
-      <command>named.conf</command> command that could be used
-      in the zone definition for "example.com".
-    </para>
-
-    <para>
-      Note that <command>named</command> itself can configure a
-      local DDNS key for use with <command>nsupdate -l</command>.
-      <command>ddns-confgen</command> is only needed when a
-      more elaborate configuration is required: for instance, if
-      <command>nsupdate</command> is to be used from a remote system.
-    </para>
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
-
-
-    <variablelist>
-      <varlistentry>
-	<term>-a <replaceable class="parameter">algorithm</replaceable></term>
-	<listitem>
-	  <para>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-h</term>
-	<listitem>
-	  <para>
-	    Prints a short summary of the options and arguments to
-	    <command>ddns-confgen</command>.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-k <replaceable class="parameter">keyname</replaceable></term>
-	<listitem>
-	  <para>
-	    Specifies the key name of the DDNS authentication key.
-	    The default is <constant>ddns-key</constant> when neither
-	    the <option>-s</option> nor <option>-z</option> option is
-	    specified; otherwise, the default
-	    is <constant>ddns-key</constant> as a separate label
-	    followed by the argument of the option, e.g.,
-	    <constant>ddns-key.example.com.</constant>
-	    The key name must have the format of a valid domain name,
-	    consisting of letters, digits, hyphens and periods.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-q</term>
-	<listitem>
-	  <para>
-	    Quiet mode:  Print only the key, with no explanatory text or
-            usage examples.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-r <replaceable class="parameter">randomfile</replaceable></term>
-	<listitem>
-	  <para>
-            Specifies a source of random data for generating the
-            authorization.  If the operating system does not provide a
-            <filename>/dev/random</filename> or equivalent device, the
-            default source of randomness is keyboard input.
-            <filename>randomdev</filename> specifies the name of a
-            character device or file containing random data to be used
-            instead of the default.  The special value
-            <filename>keyboard</filename> indicates that keyboard input
-            should be used.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-s <replaceable class="parameter">name</replaceable></term>
-	<listitem>
-	  <para>
-	    Single host mode: The example <command>named.conf</command> text
-	    shows how to set an update policy for the specified
-	    <replaceable class="parameter">name</replaceable>
-	    using the "name" nametype.
-	    The default key name is
-	    ddns-key.<replaceable class="parameter">name</replaceable>.
-	    Note that the "self" nametype cannot be used, since
-	    the name to be updated may differ from the key name.
-	    This option cannot be used with the <option>-z</option> option.
-	  </para>
-	</listitem>
-      </varlistentry>
-
-      <varlistentry>
-	<term>-z <replaceable class="parameter">zone</replaceable></term>
-	<listitem>
-	  <para>
-	    zone mode:  The example <command>named.conf</command> text
-            shows how to set an update policy for the specified
-	    <replaceable class="parameter">zone</replaceable>
-	    using the "zonesub" nametype, allowing updates to all subdomain
-	    names within
-	    that <replaceable class="parameter">zone</replaceable>.
-	    This option cannot be used with the <option>-s</option> option.
-	  </para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
-
-    <para><citerefentry>
-	<refentrytitle>nsupdate</refentrytitle><manvolnum>1</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-	<refentrytitle>named.conf</refentrytitle><manvolnum>5</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-	<refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
-      <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
-    </para>
-  </refsection>
-
-</refentry>

bin/confgen/ddns-confgen.html

@@ -1,189 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<!--
- - Copyright (C) 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
- - 
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-<html lang="en">
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title>ddns-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
-</head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
-<a name="man.ddns-confgen"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  <div class="refnamediv">
-<h2>Name</h2>
-<p>
-    <span class="application">ddns-confgen</span>
-     &#8212; ddns key generation tool
-  </p>
-</div>
-
-  
-
-  <div class="refsynopsisdiv">
-<h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">ddns-confgen</code> 
-       [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [
-         -s <em class="replaceable"><code>name</code></em> 
-         |   -z <em class="replaceable"><code>zone</code></em> 
-      ]
-       [<code class="option">-q</code>]
-       [name]
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>ddns-confgen</strong></span>
-      generates a key for use by <span class="command"><strong>nsupdate</strong></span>
-      and <span class="command"><strong>named</strong></span>.  It simplifies configuration
-      of dynamic zones by generating a key and providing the
-      <span class="command"><strong>nsupdate</strong></span> and <span class="command"><strong>named.conf</strong></span>
-      syntax that will be needed to use it, including an example
-      <span class="command"><strong>update-policy</strong></span> statement.
-    </p>
-
-    <p>
-      If a domain name is specified on the command line, it will
-      be used in the name of the generated key and in the sample
-      <span class="command"><strong>named.conf</strong></span> syntax.  For example,
-      <span class="command"><strong>ddns-confgen example.com</strong></span> would
-      generate a key called "ddns-key.example.com", and sample
-      <span class="command"><strong>named.conf</strong></span> command that could be used
-      in the zone definition for "example.com".
-    </p>
-
-    <p>
-      Note that <span class="command"><strong>named</strong></span> itself can configure a
-      local DDNS key for use with <span class="command"><strong>nsupdate -l</strong></span>.
-      <span class="command"><strong>ddns-confgen</strong></span> is only needed when a
-      more elaborate configuration is required: for instance, if
-      <span class="command"><strong>nsupdate</strong></span> is to be used from a remote system.
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
-<dt><span class="term">-a <em class="replaceable"><code>algorithm</code></em></span></dt>
-<dd>
-	  <p>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
-	  </p>
-	</dd>
-<dt><span class="term">-h</span></dt>
-<dd>
-	  <p>
-	    Prints a short summary of the options and arguments to
-	    <span class="command"><strong>ddns-confgen</strong></span>.
-	  </p>
-	</dd>
-<dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd>
-	  <p>
-	    Specifies the key name of the DDNS authentication key.
-	    The default is <code class="constant">ddns-key</code> when neither
-	    the <code class="option">-s</code> nor <code class="option">-z</code> option is
-	    specified; otherwise, the default
-	    is <code class="constant">ddns-key</code> as a separate label
-	    followed by the argument of the option, e.g.,
-	    <code class="constant">ddns-key.example.com.</code>
-	    The key name must have the format of a valid domain name,
-	    consisting of letters, digits, hyphens and periods.
-	  </p>
-	</dd>
-<dt><span class="term">-q</span></dt>
-<dd>
-	  <p>
-	    Quiet mode:  Print only the key, with no explanatory text or
-            usage examples.
-	  </p>
-	</dd>
-<dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd>
-	  <p>
-            Specifies a source of random data for generating the
-            authorization.  If the operating system does not provide a
-            <code class="filename">/dev/random</code> or equivalent device, the
-            default source of randomness is keyboard input.
-            <code class="filename">randomdev</code> specifies the name of a
-            character device or file containing random data to be used
-            instead of the default.  The special value
-            <code class="filename">keyboard</code> indicates that keyboard input
-            should be used.
-	  </p>
-	</dd>
-<dt><span class="term">-s <em class="replaceable"><code>name</code></em></span></dt>
-<dd>
-	  <p>
-	    Single host mode: The example <span class="command"><strong>named.conf</strong></span> text
-	    shows how to set an update policy for the specified
-	    <em class="replaceable"><code>name</code></em>
-	    using the "name" nametype.
-	    The default key name is
-	    ddns-key.<em class="replaceable"><code>name</code></em>.
-	    Note that the "self" nametype cannot be used, since
-	    the name to be updated may differ from the key name.
-	    This option cannot be used with the <code class="option">-z</code> option.
-	  </p>
-	</dd>
-<dt><span class="term">-z <em class="replaceable"><code>zone</code></em></span></dt>
-<dd>
-	  <p>
-	    zone mode:  The example <span class="command"><strong>named.conf</strong></span> text
-            shows how to set an update policy for the specified
-	    <em class="replaceable"><code>zone</code></em>
-	    using the "zonesub" nametype, allowing updates to all subdomain
-	    names within
-	    that <em class="replaceable"><code>zone</code></em>.
-	    This option cannot be used with the <code class="option">-s</code> option.
-	  </p>
-	</dd>
-</dl></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-	<span class="refentrytitle">nsupdate</span>(1)
-      </span>,
-      <span class="citerefentry">
-	<span class="refentrytitle">named.conf</span>(5)
-      </span>,
-      <span class="citerefentry">
-	<span class="refentrytitle">named</span>(8)
-      </span>,
-      <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
-    </p>
-  </div>
-
-</div></body>
-</html>

bin/confgen/include/confgen/os.h

@@ -1,39 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: os.h,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-/*! \file */
-
-#ifndef RNDC_OS_H
-#define RNDC_OS_H 1
-
-#include <isc/lang.h>
-#include <stdio.h>
-
-ISC_LANG_BEGINDECLS
-
-int set_user(FILE *fd, const char *user);
-/*%<
- * Set the owner of the file referenced by 'fd' to 'user'.
- * Returns:
- *   0 		success
- *   -1 	insufficient permissions, or 'user' does not exist.
- */
-
-ISC_LANG_ENDDECLS
-
-#endif

bin/confgen/keygen.c

@@ -1,223 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: keygen.c,v 1.4 2009/11/12 14:02:38 marka Exp $ */
-
-/*! \file */
-
-#include <config.h>
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include <isc/base64.h>
-#include <isc/buffer.h>
-#include <isc/entropy.h>
-#include <isc/file.h>
-#include <isc/keyboard.h>
-#include <isc/mem.h>
-#include <isc/print.h>
-#include <isc/result.h>
-#include <isc/string.h>
-
-#include <dns/keyvalues.h>
-#include <dns/name.h>
-
-#include <dst/dst.h>
-#include <confgen/os.h>
-
-#include "util.h"
-#include "keygen.h"
-
-/*%
- * Convert algorithm type to string.
- */
-const char *
-alg_totext(dns_secalg_t alg) {
-	switch (alg) {
-	    case DST_ALG_HMACMD5:
-		return "hmac-md5";
-	    case DST_ALG_HMACSHA1:
-		return "hmac-sha1";
-	    case DST_ALG_HMACSHA224:
-		return "hmac-sha224";
-	    case DST_ALG_HMACSHA256:
-		return "hmac-sha256";
-	    case DST_ALG_HMACSHA384:
-		return "hmac-sha384";
-	    case DST_ALG_HMACSHA512:
-		return "hmac-sha512";
-	    default:
-		return "(unknown)";
-	}
-}
-
-/*%
- * Convert string to algorithm type.
- */
-dns_secalg_t
-alg_fromtext(const char *name) {
-	if (strcmp(name, "hmac-md5") == 0)
-		return DST_ALG_HMACMD5;
-	if (strcmp(name, "hmac-sha1") == 0)
-		return DST_ALG_HMACSHA1;
-	if (strcmp(name, "hmac-sha224") == 0)
-		return DST_ALG_HMACSHA224;
-	if (strcmp(name, "hmac-sha256") == 0)
-		return DST_ALG_HMACSHA256;
-	if (strcmp(name, "hmac-sha384") == 0)
-		return DST_ALG_HMACSHA384;
-	if (strcmp(name, "hmac-sha512") == 0)
-		return DST_ALG_HMACSHA512;
-	return DST_ALG_UNKNOWN;
-}
-
-/*%
- * Return default keysize for a given algorithm type.
- */
-int
-alg_bits(dns_secalg_t alg) {
-	switch (alg) {
-	    case DST_ALG_HMACMD5:
-		return 128;
-	    case DST_ALG_HMACSHA1:
-		return 160;
-	    case DST_ALG_HMACSHA224:
-		return 224;
-	    case DST_ALG_HMACSHA256:
-		return 256;
-	    case DST_ALG_HMACSHA384:
-		return 384;
-	    case DST_ALG_HMACSHA512:
-		return 512;
-	    default:
-		return 0;
-	}
-}
-
-/*%
- * Generate a key of size 'keysize' using entropy source 'randomfile',
- * and place it in 'key_txtbuffer'
- */
-void
-generate_key(isc_mem_t *mctx, const char *randomfile, dns_secalg_t alg,
-	     int keysize, isc_buffer_t *key_txtbuffer) {
-	isc_result_t result = ISC_R_SUCCESS;
-	isc_entropysource_t *entropy_source = NULL;
-	int open_keyboard = ISC_ENTROPY_KEYBOARDMAYBE;
-	int entropy_flags = 0;
-	isc_entropy_t *ectx = NULL;
-	isc_buffer_t key_rawbuffer;
-	isc_region_t key_rawregion;
-	char key_rawsecret[64];
-	dst_key_t *key = NULL;
-
-	switch (alg) {
-	    case DST_ALG_HMACMD5:
-	    case DST_ALG_HMACSHA1:
-	    case DST_ALG_HMACSHA224:
-	    case DST_ALG_HMACSHA256:
-		if (keysize < 1 || keysize > 512)
-			fatal("keysize %d out of range (must be 1-512)\n",
-			      keysize);
-		break;
-	    case DST_ALG_HMACSHA384:
-	    case DST_ALG_HMACSHA512:
-		if (keysize < 1 || keysize > 1024)
-			fatal("keysize %d out of range (must be 1-1024)\n",
-			      keysize);
-		break;
-	    default:
-		fatal("unsupported algorithm %d\n", alg);
-	}
-
-
-	DO("create entropy context", isc_entropy_create(mctx, &ectx));
-
-	if (randomfile != NULL && strcmp(randomfile, "keyboard") == 0) {
-		randomfile = NULL;
-		open_keyboard = ISC_ENTROPY_KEYBOARDYES;
-	}
-	DO("start entropy source", isc_entropy_usebestsource(ectx,
-							     &entropy_source,
-							     randomfile,
-							     open_keyboard));
-
-	entropy_flags = ISC_ENTROPY_BLOCKING | ISC_ENTROPY_GOODONLY;
-
-	DO("initialize dst library", dst_lib_init(mctx, ectx, entropy_flags));
-
-	DO("generate key", dst_key_generate(dns_rootname, alg,
-					    keysize, 0, 0,
-					    DNS_KEYPROTO_ANY,
-					    dns_rdataclass_in, mctx, &key));
-
-	isc_buffer_init(&key_rawbuffer, &key_rawsecret, sizeof(key_rawsecret));
-
-	DO("dump key to buffer", dst_key_tobuffer(key, &key_rawbuffer));
-
-	isc_buffer_usedregion(&key_rawbuffer, &key_rawregion);
-
-	DO("bsse64 encode secret", isc_base64_totext(&key_rawregion, -1, "",
-						     key_txtbuffer));
-
-	/*
-	 * Shut down the entropy source now so the "stop typing" message
-	 * does not muck with the output.
-	 */
-	if (entropy_source != NULL)
-		isc_entropy_destroysource(&entropy_source);
-
-	if (key != NULL)
-		dst_key_free(&key);
-
-	isc_entropy_detach(&ectx);
-	dst_lib_destroy();
-}
-
-/*%
- * Write a key file to 'keyfile'.  If 'user' is non-NULL,
- * make that user the owner of the file.  The key will have
- * the name 'keyname' and the secret in the buffer 'secret'.
- */
-void
-write_key_file(const char *keyfile, const char *user,
-	       const char *keyname, isc_buffer_t *secret,
-	       dns_secalg_t alg) {
-	isc_result_t result;
-	const char *algname = alg_totext(alg);
-	FILE *fd = NULL;
-
-	DO("create keyfile", isc_file_safecreate(keyfile, &fd));
-
-	if (user != NULL) {
-		if (set_user(fd, user) == -1)
-			fatal("unable to set file owner\n");
-	}
-
-	fprintf(fd, "key \"%s\" {\n\talgorithm %s;\n"
-		"\tsecret \"%.*s\";\n};\n",
-		keyname, algname,
-		(int)isc_buffer_usedlength(secret),
-		(char *)isc_buffer_base(secret));
-	fflush(fd);
-	if (ferror(fd))
-		fatal("write to %s failed\n", keyfile);
-	if (fclose(fd))
-		fatal("fclose(%s) failed\n", keyfile);
-	fprintf(stderr, "wrote key file \"%s\"\n", keyfile);
-}
-

bin/confgen/keygen.h

@@ -1,41 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: keygen.h,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-#ifndef RNDC_KEYGEN_H
-#define RNDC_KEYGEN_H 1
-
-/*! \file */
-
-#include <isc/lang.h>
-
-ISC_LANG_BEGINDECLS
-
-void generate_key(isc_mem_t *mctx, const char *randomfile, dns_secalg_t alg,
-		  int keysize, isc_buffer_t *key_txtbuffer);
-
-void write_key_file(const char *keyfile, const char *user,
-		    const char *keyname, isc_buffer_t *secret,
-		    dns_secalg_t alg);
-
-const char *alg_totext(dns_secalg_t alg);
-dns_secalg_t alg_fromtext(const char *name);
-int alg_bits(dns_secalg_t alg);
-
-ISC_LANG_ENDDECLS
-
-#endif /* RNDC_KEYGEN_H */

bin/confgen/rndc-confgen.8

@@ -1,224 +0,0 @@
-.\" Copyright (C) 2001, 2003-2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.\" 
-.\" Permission to use, copy, modify, and/or distribute this software for any
-.\" purpose with or without fee is hereby granted, provided that the above
-.\" copyright notice and this permission notice appear in all copies.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-.\" REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-.\" INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-.\" LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-.\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-.\" PERFORMANCE OF THIS SOFTWARE.
-.\"
-.hy 0
-.ad l
-'\" t
-.\"     Title: rndc-confgen
-.\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2009-06-15
-.\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
-.\"
-.TH "RNDC\-CONFGEN" "8" "2009\-06\-15" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
-.\" disable hyphenation
-.nh
-.\" disable justification (adjust text to left margin only)
-.ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
-.SH "NAME"
-rndc-confgen \- rndc key generation tool
-.SH "SYNOPSIS"
-.HP \w'\fBrndc\-confgen\fR\ 'u
-\fBrndc\-confgen\fR [\fB\-a\fR] [\fB\-b\ \fR\fB\fIkeysize\fR\fR] [\fB\-c\ \fR\fB\fIkeyfile\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-p\ \fR\fB\fIport\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\fB\-s\ \fR\fB\fIaddress\fR\fR] [\fB\-t\ \fR\fB\fIchrootdir\fR\fR] [\fB\-u\ \fR\fB\fIuser\fR\fR]
-.SH "DESCRIPTION"
-.PP
-\fBrndc\-confgen\fR
-generates configuration files for
-\fBrndc\fR\&. It can be used as a convenient alternative to writing the
-rndc\&.conf
-file and the corresponding
-\fBcontrols\fR
-and
-\fBkey\fR
-statements in
-named\&.conf
-by hand\&. Alternatively, it can be run with the
-\fB\-a\fR
-option to set up a
-rndc\&.key
-file and avoid the need for a
-rndc\&.conf
-file and a
-\fBcontrols\fR
-statement altogether\&.
-.SH "OPTIONS"
-.PP
-\-a
-.RS 4
-Do automatic
-\fBrndc\fR
-configuration\&. This creates a file
-rndc\&.key
-in
-/etc
-(or whatever
-\fIsysconfdir\fR
-was specified as when
-BIND
-was built) that is read by both
-\fBrndc\fR
-and
-\fBnamed\fR
-on startup\&. The
-rndc\&.key
-file defines a default command channel and authentication key allowing
-\fBrndc\fR
-to communicate with
-\fBnamed\fR
-on the local host with no further configuration\&.
-.sp
-Running
-\fBrndc\-confgen \-a\fR
-allows BIND 9 and
-\fBrndc\fR
-to be used as drop\-in replacements for BIND 8 and
-\fBndc\fR, with no changes to the existing BIND 8
-named\&.conf
-file\&.
-.sp
-If a more elaborate configuration than that generated by
-\fBrndc\-confgen \-a\fR
-is required, for example if rndc is to be used remotely, you should run
-\fBrndc\-confgen\fR
-without the
-\fB\-a\fR
-option and set up a
-rndc\&.conf
-and
-named\&.conf
-as directed\&.
-.RE
-.PP
-\-b \fIkeysize\fR
-.RS 4
-Specifies the size of the authentication key in bits\&. Must be between 1 and 512 bits; the default is 128\&.
-.RE
-.PP
-\-c \fIkeyfile\fR
-.RS 4
-Used with the
-\fB\-a\fR
-option to specify an alternate location for
-rndc\&.key\&.
-.RE
-.PP
-\-h
-.RS 4
-Prints a short summary of the options and arguments to
-\fBrndc\-confgen\fR\&.
-.RE
-.PP
-\-k \fIkeyname\fR
-.RS 4
-Specifies the key name of the rndc authentication key\&. This must be a valid domain name\&. The default is
-\fBrndc\-key\fR\&.
-.RE
-.PP
-\-p \fIport\fR
-.RS 4
-Specifies the command channel port where
-\fBnamed\fR
-listens for connections from
-\fBrndc\fR\&. The default is 953\&.
-.RE
-.PP
-\-r \fIrandomfile\fR
-.RS 4
-Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
-/dev/random
-or equivalent device, the default source of randomness is keyboard input\&.
-randomdev
-specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
-keyboard
-indicates that keyboard input should be used\&.
-.RE
-.PP
-\-s \fIaddress\fR
-.RS 4
-Specifies the IP address where
-\fBnamed\fR
-listens for command channel connections from
-\fBrndc\fR\&. The default is the loopback address 127\&.0\&.0\&.1\&.
-.RE
-.PP
-\-t \fIchrootdir\fR
-.RS 4
-Used with the
-\fB\-a\fR
-option to specify a directory where
-\fBnamed\fR
-will run chrooted\&. An additional copy of the
-rndc\&.key
-will be written relative to this directory so that it will be found by the chrooted
-\fBnamed\fR\&.
-.RE
-.PP
-\-u \fIuser\fR
-.RS 4
-Used with the
-\fB\-a\fR
-option to set the owner of the
-rndc\&.key
-file generated\&. If
-\fB\-t\fR
-is also specified only the file in the chroot area has its owner changed\&.
-.RE
-.SH "EXAMPLES"
-.PP
-To allow
-\fBrndc\fR
-to be used with no manual configuration, run
-.PP
-\fBrndc\-confgen \-a\fR
-.PP
-To print a sample
-rndc\&.conf
-file and corresponding
-\fBcontrols\fR
-and
-\fBkey\fR
-statements to be manually inserted into
-named\&.conf, run
-.PP
-\fBrndc\-confgen\fR
-.SH "SEE ALSO"
-.PP
-\fBrndc\fR(8),
-\fBrndc.conf\fR(5),
-\fBnamed\fR(8),
-BIND 9 Administrator Reference Manual\&.
-.SH "AUTHOR"
-.PP
-\fBInternet Systems Consortium, Inc\&.\fR
-.SH "COPYRIGHT"
-.br
-Copyright \(co 2001, 2003-2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
-.br

bin/confgen/rndc-confgen.c

@@ -1,268 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: rndc-confgen.c,v 1.7 2011/03/12 04:59:46 tbox Exp $ */
-
-/*! \file */
-
-/**
- * rndc-confgen generates configuration files for rndc. It can be used
- * as a convenient alternative to writing the rndc.conf file and the
- * corresponding controls and key statements in named.conf by hand.
- * Alternatively, it can be run with the -a option to set up a
- * rndc.key file and avoid the need for a rndc.conf file and a
- * controls statement altogether.
- */
-
-#include <config.h>
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include <isc/assertions.h>
-#include <isc/base64.h>
-#include <isc/buffer.h>
-#include <isc/commandline.h>
-#include <isc/entropy.h>
-#include <isc/file.h>
-#include <isc/keyboard.h>
-#include <isc/mem.h>
-#include <isc/net.h>
-#include <isc/print.h>
-#include <isc/result.h>
-#include <isc/string.h>
-#include <isc/time.h>
-#include <isc/util.h>
-
-#include <dns/keyvalues.h>
-#include <dns/name.h>
-
-#include <dst/dst.h>
-#include <confgen/os.h>
-
-#include "util.h"
-#include "keygen.h"
-
-#define DEFAULT_KEYLENGTH	128		/*% Bits. */
-#define DEFAULT_KEYNAME		"rndc-key"
-#define DEFAULT_SERVER		"127.0.0.1"
-#define DEFAULT_PORT		953
-
-static char program[256];
-const char *progname;
-
-isc_boolean_t verbose = ISC_FALSE;
-
-const char *keyfile, *keydef;
-
-ISC_PLATFORM_NORETURN_PRE static void
-usage(int status) ISC_PLATFORM_NORETURN_POST;
-
-static void
-usage(int status) {
-
-	fprintf(stderr, "\
-Usage:\n\
- %s [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-r randomfile] \
-[-s addr] [-t chrootdir] [-u user]\n\
-  -a:		 generate just the key clause and write it to keyfile (%s)\n\
-  -b bits:	 from 1 through 512, default %d; total length of the secret\n\
-  -c keyfile:	 specify an alternate key file (requires -a)\n\
-  -k keyname:	 the name as it will be used  in named.conf and rndc.conf\n\
-  -p port:	 the port named will listen on and rndc will connect to\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n\
-  -s addr:	 the address to which rndc should connect\n\
-  -t chrootdir:	 write a keyfile in chrootdir as well (requires -a)\n\
-  -u user:	 set the keyfile owner to \"user\" (requires -a)\n",
-		 progname, keydef, DEFAULT_KEYLENGTH);
-
-	exit (status);
-}
-
-int
-main(int argc, char **argv) {
-	isc_boolean_t show_final_mem = ISC_FALSE;
-	isc_buffer_t key_txtbuffer;
-	char key_txtsecret[256];
-	isc_mem_t *mctx = NULL;
-	isc_result_t result = ISC_R_SUCCESS;
-	const char *keyname = NULL;
-	const char *randomfile = NULL;
-	const char *serveraddr = NULL;
-	dns_secalg_t alg = DST_ALG_HMACMD5;
-	const char *algname = alg_totext(alg);
-	char *p;
-	int ch;
-	int port;
-	int keysize;
-	struct in_addr addr4_dummy;
-	struct in6_addr addr6_dummy;
-	char *chrootdir = NULL;
-	char *user = NULL;
-	isc_boolean_t keyonly = ISC_FALSE;
-	int len;
-
-	keydef = keyfile = RNDC_KEYFILE;
-
-	result = isc_file_progname(*argv, program, sizeof(program));
-	if (result != ISC_R_SUCCESS)
-		memmove(program, "rndc-confgen", 13);
-	progname = program;
-
-	keyname = DEFAULT_KEYNAME;
-	keysize = DEFAULT_KEYLENGTH;
-	serveraddr = DEFAULT_SERVER;
-	port = DEFAULT_PORT;
-
-	isc_commandline_errprint = ISC_FALSE;
-
-	while ((ch = isc_commandline_parse(argc, argv,
-					   "ab:c:hk:Mmp:r:s:t:u:Vy")) != -1) {
-		switch (ch) {
-		case 'a':
-			keyonly = ISC_TRUE;
-			break;
-		case 'b':
-			keysize = strtol(isc_commandline_argument, &p, 10);
-			if (*p != '\0' || keysize < 0)
-				fatal("-b requires a non-negative number");
-			break;
-		case 'c':
-			keyfile = isc_commandline_argument;
-			break;
-		case 'h':
-			usage(0);
-		case 'k':
-		case 'y':	/* Compatible with rndc -y. */
-			keyname = isc_commandline_argument;
-			break;
-		case 'M':
-			isc_mem_debugging = ISC_MEM_DEBUGTRACE;
-			break;
-
-		case 'm':
-			show_final_mem = ISC_TRUE;
-			break;
-		case 'p':
-			port = strtol(isc_commandline_argument, &p, 10);
-			if (*p != '\0' || port < 0 || port > 65535)
-				fatal("port '%s' out of range",
-				      isc_commandline_argument);
-			break;
-		case 'r':
-			randomfile = isc_commandline_argument;
-			break;
-		case 's':
-			serveraddr = isc_commandline_argument;
-			if (inet_pton(AF_INET, serveraddr, &addr4_dummy) != 1 &&
-			    inet_pton(AF_INET6, serveraddr, &addr6_dummy) != 1)
-				fatal("-s should be an IPv4 or IPv6 address");
-			break;
-		case 't':
-			chrootdir = isc_commandline_argument;
-			break;
-		case 'u':
-			user = isc_commandline_argument;
-			break;
-		case 'V':
-			verbose = ISC_TRUE;
-			break;
-		case '?':
-			if (isc_commandline_option != '?') {
-				fprintf(stderr, "%s: invalid argument -%c\n",
-					program, isc_commandline_option);
-				usage(1);
-			} else
-				usage(0);
-			break;
-		default:
-			fprintf(stderr, "%s: unhandled option -%c\n",
-				program, isc_commandline_option);
-			exit(1);
-		}
-	}
-
-	argc -= isc_commandline_index;
-	argv += isc_commandline_index;
-	POST(argv);
-
-	if (argc > 0)
-		usage(1);
-
-	DO("create memory context", isc_mem_create(0, 0, &mctx));
-	isc_buffer_init(&key_txtbuffer, &key_txtsecret, sizeof(key_txtsecret));
-
-	generate_key(mctx, randomfile, alg, keysize, &key_txtbuffer);
-
-	if (keyonly) {
-		write_key_file(keyfile, chrootdir == NULL ? user : NULL,
-			       keyname, &key_txtbuffer, alg);
-
-		if (chrootdir != NULL) {
-			char *buf;
-			len = strlen(chrootdir) + strlen(keyfile) + 2;
-			buf = isc_mem_get(mctx, len);
-			if (buf == NULL)
-				fatal("isc_mem_get(%d) failed\n", len);
-			snprintf(buf, len, "%s%s%s", chrootdir,
-				 (*keyfile != '/') ? "/" : "", keyfile);
-
-			write_key_file(buf, user, keyname, &key_txtbuffer, alg);
-			isc_mem_put(mctx, buf, len);
-		}
-	} else {
-		printf("\
-# Start of rndc.conf\n\
-key \"%s\" {\n\
-	algorithm %s;\n\
-	secret \"%.*s\";\n\
-};\n\
-\n\
-options {\n\
-	default-key \"%s\";\n\
-	default-server %s;\n\
-	default-port %d;\n\
-};\n\
-# End of rndc.conf\n\
-\n\
-# Use with the following in named.conf, adjusting the allow list as needed:\n\
-# key \"%s\" {\n\
-# 	algorithm %s;\n\
-# 	secret \"%.*s\";\n\
-# };\n\
-# \n\
-# controls {\n\
-# 	inet %s port %d\n\
-# 		allow { %s; } keys { \"%s\"; };\n\
-# };\n\
-# End of named.conf\n",
-		       keyname, algname,
-		       (int)isc_buffer_usedlength(&key_txtbuffer),
-		       (char *)isc_buffer_base(&key_txtbuffer),
-		       keyname, serveraddr, port,
-		       keyname, algname,
-		       (int)isc_buffer_usedlength(&key_txtbuffer),
-		       (char *)isc_buffer_base(&key_txtbuffer),
-		       serveraddr, port, serveraddr, keyname);
-	}
-
-	if (show_final_mem)
-		isc_mem_stats(mctx, stderr);
-
-	isc_mem_destroy(&mctx);
-
-	return (0);
-}

bin/confgen/rndc-confgen.docbook

@@ -1,278 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.rndc-confgen">
-  <info>
-    <date>2009-06-15</date>
-  </info>
-  <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle><application>rndc-confgen</application></refentrytitle>
-    <manvolnum>8</manvolnum>
-    <refmiscinfo>BIND9</refmiscinfo>
-  </refmeta>
-
-  <refnamediv>
-    <refname><application>rndc-confgen</application></refname>
-    <refpurpose>rndc key generation tool</refpurpose>
-  </refnamediv>
-
-  <docinfo>
-    <copyright>
-      <year>2001</year>
-      <year>2003</year>
-      <year>2004</year>
-      <year>2005</year>
-      <year>2007</year>
-      <year>2009</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
-      <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
-    </copyright>
-  </docinfo>
-
-  <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
-      <command>rndc-confgen</command>
-      <arg choice="opt" rep="norepeat"><option>-a</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-b <replaceable class="parameter">keysize</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">keyfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-p <replaceable class="parameter">port</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">address</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">chrootdir</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-u <replaceable class="parameter">user</replaceable></option></arg>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-
-  <refsection><info><title>DESCRIPTION</title></info>
-
-    <para><command>rndc-confgen</command>
-      generates configuration files
-      for <command>rndc</command>.  It can be used as a
-      convenient alternative to writing the
-      <filename>rndc.conf</filename> file
-      and the corresponding <command>controls</command>
-      and <command>key</command>
-      statements in <filename>named.conf</filename> by hand.
-      Alternatively, it can be run with the <command>-a</command>
-      option to set up a <filename>rndc.key</filename> file and
-      avoid the need for a <filename>rndc.conf</filename> file
-      and a <command>controls</command> statement altogether.
-    </para>
-
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
-
-
-    <variablelist>
-      <varlistentry>
-        <term>-a</term>
-        <listitem>
-          <para>
-            Do automatic <command>rndc</command> configuration.
-            This creates a file <filename>rndc.key</filename>
-            in <filename>/etc</filename> (or whatever
-            <varname>sysconfdir</varname>
-            was specified as when <acronym>BIND</acronym> was
-            built)
-            that is read by both <command>rndc</command>
-            and <command>named</command> on startup.  The
-            <filename>rndc.key</filename> file defines a default
-            command channel and authentication key allowing
-            <command>rndc</command> to communicate with
-            <command>named</command> on the local host
-            with no further configuration.
-          </para>
-          <para>
-            Running <command>rndc-confgen -a</command> allows
-            BIND 9 and <command>rndc</command> to be used as
-            drop-in
-            replacements for BIND 8 and <command>ndc</command>,
-            with no changes to the existing BIND 8
-            <filename>named.conf</filename> file.
-          </para>
-          <para>
-            If a more elaborate configuration than that
-            generated by <command>rndc-confgen -a</command>
-            is required, for example if rndc is to be used remotely,
-            you should run <command>rndc-confgen</command> without
-            the
-            <command>-a</command> option and set up a
-            <filename>rndc.conf</filename> and
-            <filename>named.conf</filename>
-            as directed.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-b <replaceable class="parameter">keysize</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is 128.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-c <replaceable class="parameter">keyfile</replaceable></term>
-        <listitem>
-          <para>
-            Used with the <command>-a</command> option to specify
-            an alternate location for <filename>rndc.key</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-h</term>
-        <listitem>
-          <para>
-            Prints a short summary of the options and arguments to
-            <command>rndc-confgen</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-k <replaceable class="parameter">keyname</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the key name of the rndc authentication key.
-            This must be a valid domain name.
-            The default is <constant>rndc-key</constant>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-p <replaceable class="parameter">port</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the command channel port where <command>named</command>
-            listens for connections from <command>rndc</command>.
-            The default is 953.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-r <replaceable class="parameter">randomfile</replaceable></term>
-        <listitem>
-          <para>
-            Specifies a source of random data for generating the
-            authorization.  If the operating
-            system does not provide a <filename>/dev/random</filename>
-            or equivalent device, the default source of randomness
-            is keyboard input.  <filename>randomdev</filename>
-            specifies
-            the name of a character device or file containing random
-            data to be used instead of the default.  The special value
-            <filename>keyboard</filename> indicates that keyboard
-            input should be used.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-s <replaceable class="parameter">address</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the IP address where <command>named</command>
-            listens for command channel connections from
-            <command>rndc</command>.  The default is the loopback
-            address 127.0.0.1.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-t <replaceable class="parameter">chrootdir</replaceable></term>
-        <listitem>
-          <para>
-            Used with the <command>-a</command> option to specify
-            a directory where <command>named</command> will run
-            chrooted.  An additional copy of the <filename>rndc.key</filename>
-            will be written relative to this directory so that
-            it will be found by the chrooted <command>named</command>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-u <replaceable class="parameter">user</replaceable></term>
-        <listitem>
-          <para>
-            Used with the <command>-a</command> option to set the
-            owner
-            of the <filename>rndc.key</filename> file generated.
-            If
-            <command>-t</command> is also specified only the file
-            in
-            the chroot area has its owner changed.
-          </para>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-  </refsection>
-
-  <refsection><info><title>EXAMPLES</title></info>
-
-    <para>
-      To allow <command>rndc</command> to be used with
-      no manual configuration, run
-    </para>
-    <para><userinput>rndc-confgen -a</userinput>
-    </para>
-    <para>
-      To print a sample <filename>rndc.conf</filename> file and
-      corresponding <command>controls</command> and <command>key</command>
-      statements to be manually inserted into <filename>named.conf</filename>,
-      run
-    </para>
-    <para><userinput>rndc-confgen</userinput>
-    </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
-
-    <para><citerefentry>
-        <refentrytitle>rndc</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-        <refentrytitle>rndc.conf</refentrytitle><manvolnum>5</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-        <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
-      <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
-    </para>
-  </refsection>
-
-</refentry>

bin/confgen/rndc-confgen.html

@@ -1,240 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<!--
- - Copyright (C) 2001, 2003-2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
- - 
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- - 
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-<html lang="en">
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title>rndc-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
-</head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
-<a name="man.rndc-confgen"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  <div class="refnamediv">
-<h2>Name</h2>
-<p>
-    <span class="application">rndc-confgen</span>
-     &#8212; rndc key generation tool
-  </p>
-</div>
-
-  
-
-  <div class="refsynopsisdiv">
-<h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">rndc-confgen</code> 
-       [<code class="option">-a</code>]
-       [<code class="option">-b <em class="replaceable"><code>keysize</code></em></code>]
-       [<code class="option">-c <em class="replaceable"><code>keyfile</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
-       [<code class="option">-p <em class="replaceable"><code>port</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>address</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>chrootdir</code></em></code>]
-       [<code class="option">-u <em class="replaceable"><code>user</code></em></code>]
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>rndc-confgen</strong></span>
-      generates configuration files
-      for <span class="command"><strong>rndc</strong></span>.  It can be used as a
-      convenient alternative to writing the
-      <code class="filename">rndc.conf</code> file
-      and the corresponding <span class="command"><strong>controls</strong></span>
-      and <span class="command"><strong>key</strong></span>
-      statements in <code class="filename">named.conf</code> by hand.
-      Alternatively, it can be run with the <span class="command"><strong>-a</strong></span>
-      option to set up a <code class="filename">rndc.key</code> file and
-      avoid the need for a <code class="filename">rndc.conf</code> file
-      and a <span class="command"><strong>controls</strong></span> statement altogether.
-    </p>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
-<dt><span class="term">-a</span></dt>
-<dd>
-          <p>
-            Do automatic <span class="command"><strong>rndc</strong></span> configuration.
-            This creates a file <code class="filename">rndc.key</code>
-            in <code class="filename">/etc</code> (or whatever
-            <code class="varname">sysconfdir</code>
-            was specified as when <acronym class="acronym">BIND</acronym> was
-            built)
-            that is read by both <span class="command"><strong>rndc</strong></span>
-            and <span class="command"><strong>named</strong></span> on startup.  The
-            <code class="filename">rndc.key</code> file defines a default
-            command channel and authentication key allowing
-            <span class="command"><strong>rndc</strong></span> to communicate with
-            <span class="command"><strong>named</strong></span> on the local host
-            with no further configuration.
-          </p>
-          <p>
-            Running <span class="command"><strong>rndc-confgen -a</strong></span> allows
-            BIND 9 and <span class="command"><strong>rndc</strong></span> to be used as
-            drop-in
-            replacements for BIND 8 and <span class="command"><strong>ndc</strong></span>,
-            with no changes to the existing BIND 8
-            <code class="filename">named.conf</code> file.
-          </p>
-          <p>
-            If a more elaborate configuration than that
-            generated by <span class="command"><strong>rndc-confgen -a</strong></span>
-            is required, for example if rndc is to be used remotely,
-            you should run <span class="command"><strong>rndc-confgen</strong></span> without
-            the
-            <span class="command"><strong>-a</strong></span> option and set up a
-            <code class="filename">rndc.conf</code> and
-            <code class="filename">named.conf</code>
-            as directed.
-          </p>
-        </dd>
-<dt><span class="term">-b <em class="replaceable"><code>keysize</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is 128.
-          </p>
-        </dd>
-<dt><span class="term">-c <em class="replaceable"><code>keyfile</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to specify
-            an alternate location for <code class="filename">rndc.key</code>.
-          </p>
-        </dd>
-<dt><span class="term">-h</span></dt>
-<dd>
-          <p>
-            Prints a short summary of the options and arguments to
-            <span class="command"><strong>rndc-confgen</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the key name of the rndc authentication key.
-            This must be a valid domain name.
-            The default is <code class="constant">rndc-key</code>.
-          </p>
-        </dd>
-<dt><span class="term">-p <em class="replaceable"><code>port</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the command channel port where <span class="command"><strong>named</strong></span>
-            listens for connections from <span class="command"><strong>rndc</strong></span>.
-            The default is 953.
-          </p>
-        </dd>
-<dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd>
-          <p>
-            Specifies a source of random data for generating the
-            authorization.  If the operating
-            system does not provide a <code class="filename">/dev/random</code>
-            or equivalent device, the default source of randomness
-            is keyboard input.  <code class="filename">randomdev</code>
-            specifies
-            the name of a character device or file containing random
-            data to be used instead of the default.  The special value
-            <code class="filename">keyboard</code> indicates that keyboard
-            input should be used.
-          </p>
-        </dd>
-<dt><span class="term">-s <em class="replaceable"><code>address</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the IP address where <span class="command"><strong>named</strong></span>
-            listens for command channel connections from
-            <span class="command"><strong>rndc</strong></span>.  The default is the loopback
-            address 127.0.0.1.
-          </p>
-        </dd>
-<dt><span class="term">-t <em class="replaceable"><code>chrootdir</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to specify
-            a directory where <span class="command"><strong>named</strong></span> will run
-            chrooted.  An additional copy of the <code class="filename">rndc.key</code>
-            will be written relative to this directory so that
-            it will be found by the chrooted <span class="command"><strong>named</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-u <em class="replaceable"><code>user</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to set the
-            owner
-            of the <code class="filename">rndc.key</code> file generated.
-            If
-            <span class="command"><strong>-t</strong></span> is also specified only the file
-            in
-            the chroot area has its owner changed.
-          </p>
-        </dd>
-</dl></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>EXAMPLES</h2>
-
-    <p>
-      To allow <span class="command"><strong>rndc</strong></span> to be used with
-      no manual configuration, run
-    </p>
-    <p><strong class="userinput"><code>rndc-confgen -a</code></strong>
-    </p>
-    <p>
-      To print a sample <code class="filename">rndc.conf</code> file and
-      corresponding <span class="command"><strong>controls</strong></span> and <span class="command"><strong>key</strong></span>
-      statements to be manually inserted into <code class="filename">named.conf</code>,
-      run
-    </p>
-    <p><strong class="userinput"><code>rndc-confgen</code></strong>
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">rndc</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">rndc.conf</span>(5)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
-    </p>
-  </div>
-
-</div></body>
-</html>

bin/confgen/unix/Makefile.in

@@ -1,35 +0,0 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-
-# $Id: Makefile.in,v 1.3 2009/06/11 23:47:55 tbox Exp $
-
-srcdir =	@srcdir@
-VPATH =		@srcdir@
-top_srcdir =	@top_srcdir@
-
-@BIND9_MAKE_INCLUDES@
-
-CINCLUDES =	-I${srcdir}/include -I${srcdir}/../include \
-		${DNS_INCLUDES} ${ISC_INCLUDES}
-
-CDEFINES =
-CWARNINGS =
-
-OBJS =		os.@O@
-
-SRCS =		os.c
-
-TARGETS =	${OBJS}
-
-@BIND9_MAKE_RULES@

bin/confgen/unix/os.c

@@ -1,43 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: os.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-/*! \file */
-
-#include <config.h>
-
-#include <confgen/os.h>
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <pwd.h>
-#include <errno.h>
-#include <stdio.h>
-#include <sys/stat.h>
-
-int
-set_user(FILE *fd, const char *user) {
-	struct passwd *pw;
-
-	pw = getpwnam(user);
-	if (pw == NULL) {
-		errno = EINVAL;
-		return (-1);
-	}
-	return (fchown(fileno(fd), pw->pw_uid, -1));
-}

bin/confgen/util.c

@@ -1,57 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: util.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-/*! \file */
-
-#include <config.h>
-
-#include <stdarg.h>
-#include <stdlib.h>
-#include <stdio.h>
-
-#include <isc/boolean.h>
-#include <isc/print.h>
-
-#include "util.h"
-
-extern isc_boolean_t verbose;
-extern const char *progname;
-
-void
-notify(const char *fmt, ...) {
-	va_list ap;
-
-	if (verbose) {
-		va_start(ap, fmt);
-		vfprintf(stderr, fmt, ap);
-		va_end(ap);
-		fputs("\n", stderr);
-	}
-}
-
-void
-fatal(const char *format, ...) {
-	va_list args;
-
-	fprintf(stderr, "%s: ", progname);
-	va_start(args, format);
-	vfprintf(stderr, format, args);
-	va_end(args);
-	fprintf(stderr, "\n");
-	exit(1);
-}

bin/confgen/util.h

@@ -1,52 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: util.h,v 1.4 2009/09/29 15:06:05 fdupont Exp $ */
-
-#ifndef RNDC_UTIL_H
-#define RNDC_UTIL_H 1
-
-/*! \file */
-
-#include <isc/lang.h>
-#include <isc/platform.h>
-
-#include <isc/formatcheck.h>
-
-#define NS_CONTROL_PORT		953
-
-#undef DO
-#define DO(name, function) \
-	do { \
-		result = function; \
-		if (result != ISC_R_SUCCESS) \
-			fatal("%s: %s", name, isc_result_totext(result)); \
-		else \
-			notify("%s", name); \
-	} while (0)
-
-ISC_LANG_BEGINDECLS
-
-void
-notify(const char *fmt, ...) ISC_FORMAT_PRINTF(1, 2);
-
-ISC_PLATFORM_NORETURN_PRE void
-fatal(const char *format, ...)
-ISC_FORMAT_PRINTF(1, 2) ISC_PLATFORM_NORETURN_POST;
-
-ISC_LANG_ENDDECLS
-
-#endif /* RNDC_UTIL_H */

bin/confgen/win32/confgentool.dsp.in

@@ -1,135 +0,0 @@
-# Microsoft Developer Studio Project File - Name="confgentool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
-
-CFG=confgentool - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak" CFG="confgentool - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "confgentool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE "confgentool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "confgentool - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Release/confgentool.lib"
-
-!ELSEIF  "$(CFG)" == "confgentool - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug /out:"Debug/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Debug/confgentool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "confgentool - @PLATFORM@ Release"
-# Name "confgentool - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\keygen.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\keygen.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\os.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/confgen/win32/confgentool.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "confgentool"=".\confgentool.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/confgen/win32/confgentool.vcxproj.filters.in

@@ -1,39 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\keygen.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-    <ClInclude Include="..\util.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-    <ClInclude Include="..\include\confgen\os.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\keygen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="..\util.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="os.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/confgentool.vcxproj.in

@@ -1,111 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{64964B03-4815-41F0-9057-E766A94AF197}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>confgentool</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>.\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>.\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <LinkTimeCodeGeneration>false</LinkTimeCodeGeneration>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\include\confgen\os.h" />
-    <ClInclude Include="..\keygen.h" />
-    <ClInclude Include="..\util.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\keygen.c" />
-    <ClCompile Include="..\util.c" />
-    <ClCompile Include="os.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/confgentool.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/confgen/win32/ddnsconfgen.dsp.in

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="ddnsconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=ddnsconfgen - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "ddnsconfgen - @PLATFORM@ Release"
-# Name "ddnsconfgen - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\ddns-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/ddnsconfgen.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "ddnsconfgen"=".\ddnsconfgen.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/confgen/win32/ddnsconfgen.mak.in

@@ -1,337 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on ddnsconfgen.dsp
-!IF "$(CFG)" == ""
-CFG=ddnsconfgen - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to ddnsconfgen - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "ddnsconfgen - @PLATFORM@ Release" && "$(CFG)" != "ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\ddns-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\ddns-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\ddnsconfgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\ddns-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\ddns-confgen.exe" "$(OUTDIR)\ddnsconfgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\ddns-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\ddnsconfgen.bsc"
-	-@erase "$(OUTDIR)\ddns-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.exe"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\ddns-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\ddnsconfgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\ddns-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("ddnsconfgen.dep")
-!INCLUDE "ddnsconfgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "ddnsconfgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release" || "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\ddns-confgen.c"
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\ddns-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\ddns-confgen.obj"	"$(INTDIR)\ddns-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/ddnsconfgen.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\ddns-confgen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.in

@@ -1,112 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{1EA4FC64-F33B-4A50-970A-EA052BBE9CF1}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>ddnsconfgen</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>ddns-confgen</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>ddns-confgen</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClCompile Include="..\ddns-confgen.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/confgen/win32/os.c

@@ -1,34 +0,0 @@
-/*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/* $Id: os.c,v 1.3 2009/06/11 23:47:55 tbox Exp $ */
-
-#include <config.h>
-
-#include <confgen/os.h>
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <errno.h>
-#include <stdio.h>
-#include <io.h>
-#include <sys/stat.h>
-
-int
-set_user(FILE *fd, const char *user) {
-	return (0);
-}

bin/confgen/win32/rndcconfgen.dsp.in

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="rndcconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=rndcconfgen - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "rndcconfgen - @PLATFORM@ Release"
-# Name "rndcconfgen - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\rndc-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/rndcconfgen.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "rndconfgen"=".\rndconfgen.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/confgen/win32/rndcconfgen.mak.in

@@ -1,336 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on confgen.dsp
-!IF "$(CFG)" == ""
-CFG=rndcconfgen - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to rndcconfgen - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "rndcconfgen - @PLATFORM@ Release" && "$(CFG)" != "rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\rndc-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\rndc-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\confgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rndc-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\rndc-confgen.exe" "$(OUTDIR)\confgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\rndc-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\confgen.bsc"
-	-@erase "$(OUTDIR)\rndc-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.exe"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\rndc-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\confgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\rndc-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("confgen.dep")
-!INCLUDE "confgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "confgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "rndcconfgen - @PLATFORM@ Release" || "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\rndc-confgen.c"
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\rndc-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\rndc-confgen.obj"	"$(INTDIR)\rndc-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/rndcconfgen.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\rndc-confgen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/rndcconfgen.vcxproj.in

@@ -1,112 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{1E2C1635-3093-4D59-80E7-4743AC10F22F}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>rndcconfgen</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>rndc-confgen</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>rndc-confgen</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClCompile Include="..\rndc-confgen.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/rndcconfgen.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/dig/.cvsignore

@@ -0,0 +1,6 @@
+Makefile
+dig
+host
+nslookup
+*.lo
+.libs

bin/dig/.gitignore

@@ -1,7 +0,0 @@
-/dig
-/host
-/nslookup
-.libs
-dig-symtbl.c
-host-symtbl.c
-nslookup-symtbl.c

bin/dig/Makefile.in

@@ -1,61 +1,46 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2000, 2001  Internet Software Consortium.
 #
-# Permission to use, copy, modify, and/or distribute this software for any
+# Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
 # copyright notice and this permission notice appear in all copies.
 #
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
+# THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+# DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+# INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-# $Id: Makefile.in,v 1.47 2009/12/05 23:31:40 each Exp $
+# $Id: Makefile.in,v 1.25 2001/06/08 17:18:06 gson Exp $
 
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
-@BIND9_MAKE_INCLUDES@
+@BIND9_INCLUDES@
 
-READLINE_LIB = @READLINE_LIB@
-
-CINCLUDES =	-I${srcdir}/include ${DNS_INCLUDES} \
-		${BIND9_INCLUDES} ${ISC_INCLUDES} \
-		${LWRES_INCLUDES} ${ISCCFG_INCLUDES}
+CINCLUDES =	-I${srcdir}/include ${DNS_INCLUDES} ${ISC_INCLUDES}
 
 CDEFINES =	-DVERSION=\"${VERSION}\"
 CWARNINGS =
 
-ISCCFGLIBS =	../../lib/isccfg/libisccfg.@A@
-DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
-BIND9LIBS =	../../lib/bind9/libbind9.@A@
+DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_OPENSSL_LIBS@ @DNS_GSSAPI_LIBS@
 ISCLIBS =	../../lib/isc/libisc.@A@
-ISCNOSYMLIBS =	../../lib/isc/libisc-nosymtbl.@A@
-LWRESLIBS =	../../lib/lwres/liblwres.@A@
 
-ISCCFGDEPLIBS =	../../lib/isccfg/libisccfg.@A@
 DNSDEPLIBS =	../../lib/dns/libdns.@A@
-BIND9DEPLIBS =	../../lib/bind9/libbind9.@A@
 ISCDEPLIBS =	../../lib/isc/libisc.@A@
-LWRESDEPLIBS =	../../lib/lwres/liblwres.@A@
 
-DEPLIBS =	${DNSDEPLIBS} ${BIND9DEPLIBS} ${ISCDEPLIBS} ${ISCCFGDEPLIBS} \
-		${LWRESDEPLIBS}
+DEPLIBS =	${DNSDEPLIBS} ${ISCDEPLIBS}
 
-LIBS =		${LWRESLIBS} ${DNSLIBS} ${BIND9LIBS} ${ISCCFGLIBS} \
-		${ISCLIBS} @IDNLIBS@ @LIBS@
-
-NOSYMLIBS =	${LWRESLIBS} ${DNSLIBS} ${BIND9LIBS} ${ISCCFGLIBS} \
-		${ISCNOSYMLIBS} @IDNLIBS@ @LIBS@
+LIBS =		${DNSLIBS} ${ISCLIBS} @LIBS@
 
 SUBDIRS =
 
-TARGETS =	dig@EXEEXT@ host@EXEEXT@ nslookup@EXEEXT@
+TARGETS =	dig host nslookup
 
 OBJS =		dig.@O@ dighost.@O@ host.@O@ nslookup.@O@
 
@@ -63,25 +48,22 @@ UOBJS =
 
 SRCS =		dig.c dighost.c host.c nslookup.c
 
-MANPAGES =	dig.1 host.1 nslookup.1
+MANPAGES =	dig.1 host.1
 
-HTMLPAGES =	dig.html host.html nslookup.html
+HTMLPAGES =	dig.html host.html
 
 MANOBJS =	${MANPAGES} ${HTMLPAGES}
 
 @BIND9_MAKE_RULES@
 
-dig@EXEEXT@: dig.@O@ dighost.@O@ ${UOBJS} ${DEPLIBS}
-	export BASEOBJS="dig.@O@ dighost.@O@ ${UOBJS}"; \
-	${FINALBUILDCMD}
+dig: dig.@O@ dighost.@O@ ${UOBJS} ${DEPLIBS}
+	${LIBTOOL} ${PURIFY} ${CC} ${CFLAGS} -o $@ dig.@O@ dighost.@O@ ${UOBJS} ${LIBS}
 
-host@EXEEXT@: host.@O@ dighost.@O@ ${UOBJS} ${DEPLIBS}
-	export BASEOBJS="host.@O@ dighost.@O@ ${UOBJS}"; \
-	${FINALBUILDCMD}
+host: host.@O@ dighost.@O@ ${UOBJS} ${DEPLIBS}
+	${LIBTOOL} ${PURIFY} ${CC} ${CFLAGS} -o $@ host.@O@ dighost.@O@ ${UOBJS} ${LIBS}
 
-nslookup@EXEEXT@: nslookup.@O@ dighost.@O@ ${UOBJS} ${DEPLIBS}
-	export BASEOBJS="nslookup.@O@ dighost.@O@ ${READLINE_LIB} ${UOBJS}"; \
-	${FINALBUILDCMD}
+nslookup: nslookup.@O@ dighost.@O@ ${UOBJS} ${DEPLIBS}
+	${LIBTOOL} ${PURIFY} ${CC} ${CFLAGS} -o $@ nslookup.@O@ dighost.@O@ ${UOBJS} ${LIBS}
 
 doc man:: ${MANOBJS}
 
@@ -95,21 +77,8 @@ installdirs:
 	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${bindir}
 	$(SHELL) ${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man1
 
-install:: dig@EXEEXT@ host@EXEEXT@ nslookup@EXEEXT@ installdirs
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} \
-		dig@EXEEXT@ ${DESTDIR}${bindir}
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} \
-		host@EXEEXT@ ${DESTDIR}${bindir}
-	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} \
-		nslookup@EXEEXT@ ${DESTDIR}${bindir}
-	for m in ${MANPAGES}; do \
-		${INSTALL_DATA} ${srcdir}/$$m ${DESTDIR}${mandir}/man1; \
-		done
-
-uninstall::
-	for m in ${MANPAGES}; do \
-		rm -f ${DESTDIR}${mandir}/man1/$$m ; \
-	done
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${bindir}/nslookup@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${bindir}/host@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${bindir}/dig@EXEEXT@
+install:: dig host nslookup installdirs
+	${LIBTOOL} ${INSTALL_PROGRAM} dig ${DESTDIR}${bindir}
+	${LIBTOOL} ${INSTALL_PROGRAM} host ${DESTDIR}${bindir}
+	${LIBTOOL} ${INSTALL_PROGRAM} nslookup ${DESTDIR}${bindir}
+	for m in ${MANPAGES}; do ${INSTALL_DATA} ${srcdir}/$$m ${DESTDIR}${mandir}/man1; done