missed a line

[RT #26796]

3230.   [bug]           'dig axfr' failed to properly handle a multi-message
                        axfr with a serial of 0. [RT #26796]

.cvsignore

@@ -0,0 +1,9 @@
+Makefile
+config.log
+config.h
+config.cache
+config.status
+libtool
+isc-config.sh
+configure.lineno
+autom4te.cache

.gitattributes

@@ -1,3 +0,0 @@
-*.sln.in eol=crlf
-*.vcxproj.in eol=crlf
-*.vcxproj.filters.in eol=crlf

.gitignore

@@ -1,56 +0,0 @@
-Makefile
-config.log
-config.h
-config.cache
-config.status
-libtool
-/isc-config.sh
-/configure.lineno
-autom4te.cache/
-*.o
-*.lo
-*.so
-*.a
-*.la
-*_test
-*-symtbl.c
-timestamp
-ans.run
-lwresd.run
-named.run
-named.memstats
-gen.dSYM/
-.libs/
-.deps/
-.dirstamp
-unit/atf-src/atf-c++/atf-c++.pc
-unit/atf-src/atf-c/atf-c.pc
-unit/atf-src/atf-c/defs.h
-unit/atf-src/atf-c/detail/process_helpers
-unit/atf-src/atf-config/atf-config
-unit/atf-src/atf-report/atf-report
-unit/atf-src/atf-report/fail_helper
-unit/atf-src/atf-report/misc_helpers
-unit/atf-src/atf-report/pass_helper
-unit/atf-src/atf-run/atf-run
-unit/atf-src/atf-run/bad_metadata_helper
-unit/atf-src/atf-run/expect_helpers
-unit/atf-src/atf-run/misc_helpers
-unit/atf-src/atf-run/pass_helper
-unit/atf-src/atf-run/several_tcs_helper
-unit/atf-src/atf-run/zero_tcs_helper
-unit/atf-src/atf-sh/atf-check
-unit/atf-src/atf-sh/atf-sh
-unit/atf-src/atf-sh/misc_helpers
-unit/atf-src/atf-version/atf-version
-unit/atf-src/atf-version/revision.h
-unit/atf-src/atf-version/revision.h.stamp
-unit/atf-src/bconfig.h
-unit/atf-src/bootstrap/atconfig
-unit/atf-src/doc/atf.7
-unit/atf-src/stamp-h1
-unit/atf-src/test-programs/c_helpers
-unit/atf-src/test-programs/cpp_helpers
-unit/atf-src/test-programs/sh_helpers
-# ccc-analyzer store its results in .plist directories
-*.plist/

.gitlab-ci.yml

@@ -1,207 +0,0 @@
-variables:
-  DEBIAN_FRONTEND: noninteractive
-  LC_ALL: C
-  DOCKER_DRIVER: overlay2
-  CI_REGISTRY_IMAGE: oerdnj/bind9
-  CCACHE_DIR: "/ccache"
-
-stages:
-  - precheck
-  - build
-  - test
-
-.debian-jessie-amd64: &debian_jessie_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-jessie-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-jessie-i386: &debian_jessie_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-jessie-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.debian-stretch-amd64: &debian_stretch_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-stretch-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-stretch-i386:: &debian_stretch_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-stretch-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.debian-buster-amd64: &debian_buster_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-buster-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-buster-i386:: &debian_buster_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-buster-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.debian-sid-amd64: &debian_sid_amd64_image
-  image: "$CI_REGISTRY_IMAGE:debian-sid-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.debian-sid-i386: &debian_sid_i386_image
-  image: "$CI_REGISTRY_IMAGE:debian-sid-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.ubuntu-trusty-amd64: &ubuntu_trusty_amd64_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-trusty-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.ubuntu-trusty-i386: &ubuntu_trusty_i386_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-trusty-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.ubuntu-xenial-amd64: &ubuntu_xenial_amd64_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-xenial-amd64"
-  tags:
-    - linux
-    - docker
-    - amd64
-
-.ubuntu-xenial-i386: &ubuntu_xenial_i386_image
-  image: "$CI_REGISTRY_IMAGE:ubuntu-xenial-i386"
-  tags:
-    - linux
-    - docker
-    - i386
-
-.build: &build_job
-  stage: build
-  before_script:
-    - test -w "${CCACHE_DIR}" && export PATH="/usr/lib/ccache:${PATH}"
-    - autoreconf -fi
-  script:
-    - ./configure --enable-developer --with-libtool --disable-static --with-atf=/usr/local
-    - make -j${PARALLEL_JOBS_BUILD:-1} -k all V=1
-  artifacts:
-    expire_in: '1 hour'
-    untracked: true
-
-.system_test: &system_test_job
-  stage: test
-  before_script:
-    - rm -rf .ccache
-    - bash -x bin/tests/system/ifconfig.sh up
-  script:
-    - ( cd bin/tests && make -j${TEST_PARALLEL_JOBS:-1} -k test V=1 )
-    - test -s bin/tests/system/systests.output
-  artifacts:
-    untracked: true
-    expire_in: '1 week'
-    when: on_failure
-
-.unit_test: &unit_test_job
-  stage: test
-  before_script:
-    - export KYUA_RESULT="$CI_PROJECT_DIR/kyua.results"
-  script:
-    - make unit
-  after_script:
-    - kyua report-html --force --results-file kyua.results --results-filter "" --output kyua_html
-  artifacts:
-    paths:
-    - atf.out
-    - kyua.log
-    - kyua.results
-    - kyua_html/
-    expire_in: '1 week'
-    when: on_failure
-
-precheck:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  stage: precheck
-  script:
-    - perl util/check-changes CHANGES
-    - perl -w util/merge_copyrights
-    - diff -urNap util/copyrights util/newcopyrights
-    - rm util/newcopyrights
-  artifacts:
-    paths:
-    - util/newcopyrights
-    expire_in: '1 week'
-    when: on_failure
-
-#build:debian:jessie:amd64:
-#  <<: *debian_jessie_amd64_image
-#  <<: *build_job
-#
-#build:debian:jessie:i386:
-#  <<: *debian_jessie_i386_image
-#  <<: *build_job
-#
-#build:debian:stretch:amd64:
-#  <<: *debian_stretch_amd64_image
-#  <<: *build_job
-#
-#build:debian:buster:i386:
-#  <<: *debian_buster_i386_image
-#  <<: *build_job
-#
-#build:ubuntu:trusty:amd64:
-#  <<: *ubuntu_trusty_amd64_image
-#  <<: *build_job
-#
-#build:ubuntu:xenial:i386:
-#  <<: *ubuntu_xenial_i386_image
-#  <<: *build_job
-
-build:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  <<: *build_job
-    
-build:debian:sid:i386:
-  <<: *debian_sid_i386_image
-  <<: *build_job
-
-unittest:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  <<: *unit_test_job
-  dependencies:
-    - build:debian:sid:amd64
-    
-unittest:debian:sid:i386:
-  <<: *debian_sid_i386_image
-  <<: *unit_test_job
-  dependencies:
-    - build:debian:sid:i386
-
-systemtest:debian:sid:amd64:
-  <<: *debian_sid_amd64_image
-  <<: *system_test_job
-  dependencies:
-    - build:debian:sid:amd64
-    
-systemtest:debian:sid:i386:
-  <<: *debian_sid_i386_image
-  <<: *system_test_job
-  dependencies:
-    - build:debian:sid:i386

CONTRIBUTING

@@ -1,186 +0,0 @@
-BIND Source Access and Contributor Guidelines
-
-Feb 22, 2018
-
-Contents
-
- 1. Access to source code
- 2. Reporting bugs
- 3. Contributing code
-
-Introduction
-
-Thank you for using BIND!
-
-BIND is open source software that implements the Domain Name System (DNS)
-protocols for the Internet. It is a reference implementation of those
-protocols, but it is also production-grade software, suitable for use in
-high-volume and high-reliability applications. It is by far the most
-widely used DNS software, providing a robust and stable platform on top of
-which organizations can build distributed computing systems with the
-knowledge that those systems are fully compliant with published DNS
-standards.
-
-BIND is and will always remain free and openly available. It can be used
-and modified in any way by anyone.
-
-BIND is maintained by the Internet Systems Consortium, a public-benefit
-501(c)(3) nonprofit, using a "managed open source" approach: anyone can
-see the source, but only ISC employees have commit access. Until recently,
-the source could only be seen once ISC had published a release: read
-access to the source repository was restricted just as commit access was.
-That's now changing, with the opening of a public git mirror to the BIND
-source tree (see below).
-
-Access to source code
-
-Public BIND releases are always available from the ISC FTP site.
-
-A public-access GIT repository is also available at https://gitlab.isc.org
-. This repository is a mirror, updated several times per day, of the
-source repository maintained by ISC. It contains all the public release
-branches; upcoming releases can be viewed in their current state at any
-time. It does not contain development branches or unreviewed work in
-progress. Commits which address security vulnerablilities are withheld
-until after public disclosure.
-
-You can browse the source online via https://gitlab.isc.org/isc-projects/
-bind9
-
-To clone the repository, use:
-
-      $ git clone https://gitlab.isc.org/isc-projects/bind9.git
-
-Release branch names are of the form v9_X, where X represents the second
-number in the BIND 9 version number. So, to check out the BIND 9.12
-branch, use:
-
-      $ git checkout v9_12
-
-Whenever a branch is ready for publication, a tag will be placed of the
-form v9_X_Y. The 9.12.0 release, for instance, is tagged as v9_12_0.
-
-The branch in which the next major release is being developed is called
-master.
-
-Reporting bugs
-
-Reports of flaws in the BIND package, including software bugs, errors in
-the documentation, missing files in the tarball, suggested changes or
-requests for new features, etc, can be filed using https://gitlab.isc.org/
-isc-projects/bind9/issues.
-
-Due to a large ticket backlog, we are sometimes slow to respond,
-especially if a bug is cosmetic or if a feature request is vague or low in
-priority, but we will try at least to acknowledge legitimate bug reports
-within a week.
-
-ISC's ticketing system is publicly readable; however, you must have an
-account to file a new issue. You can either register locally or use
-credentials from an existing account at GitHub, GitLab, Google, Twitter,
-or Facebook.
-
-Reporting possible security issues
-
-If you think you may be seeing a potential security vulnerability in BIND
-(for example, a crash with REQUIRE, INSIST, or ASSERT failure), please
-report it immediately by emailing to security-officer@isc.org. Plain-text
-e-mail is not a secure choice for communications concerning undisclosed
-security issues so please encrypt your communications to us if possible,
-using the ISC Security Officer public key.
-
-Do not discuss undisclosed security vulnerabilites on any public mailing
-list. ISC has a long history of handling reported vulnerabilities promptly
-and effectively and we respect and acknowledge responsible reporters.
-
-ISC's Security Vulnerability Disclosure Policy is documented at https://
-kb.isc.org/article/AA-00861/0.
-
-If you have a crash, you may want to consult ?What to do if your BIND or
-DHCP server has crashed.?
-
-Contributing code
-
-BIND is licensed under the Mozilla Public License 2.0. Earier versions
-(BIND 9.10 and earlier) were licensed under the ISC License
-
-ISC does not require an explicit copyright assignment for patch
-contributions. However, by submitting a patch to ISC, you implicitly
-certify that you are the author of the code, that you intend to reliquish
-exclusive copyright, and that you grant permission to publish your work
-under the open source license used for the BIND version(s) to which your
-patch will be applied.
-
-BIND code
-
-Patches for BIND may be submitted directly via merge requests in ISC's
-Gitlab source repository for BIND.
-
-Patches can also be submitted as diffs against a specific version of BIND
--- preferably the current top of the master branch. Diffs may be generated
-using either git format-patch or git diff.
-
-Those wanting to write code for BIND may be interested in the developer
-information page, which includes information about BIND design and coding
-practices, including discussion of internal APIs and overall system
-architecture. (This is a work in progress, and still quite preliminary.)
-
-Every patch submitted will be reviewed by ISC engineers following our code
-review process before it is merged.
-
-It may take considerable time to review patch submissions, especially if
-they don't meet ISC style and quality guidelines. If a patch is a good
-idea, we can and will do additional work to bring it up to par, but if
-we're busy with other work, it may take us a long time to get to it.
-
-To ensure your patch is acted on as promptly as possible, please:
-
-  * Try to adhere to the BIND 9 coding style.
-  * Run make check to ensure your change hasn't caused any functional
-    regressions.
-  * Document your work, both in the patch itself and in the accompanying
-    email.
-  * In patches that make non-trivial functional changes, include system
-    tests if possible; when introducing or substantially altering a
-    library API, include unit tests. See Testing for more information.
-
-Changes to configure
-
-If you need to make changes to configure, you should not edit it directly;
-instead, edit configure.in, then run autoconf. Similarly, instead of
-editing config.h.in directly, edit configure.in and run autoheader.
-
-When submitting a patch as a diff, it's fine to omit the configure diffs
-to save space. Just send the configure.in diffs and we'll generate the new
-configure during the review process.
-
-Documentation
-
-All functional changes should be documented. There are three types of
-documentation in the BIND source tree:
-
-  * Man pages are kept alongside the source code for the commands they
-    document, in files ending in .docbook; for example, the named man page
-    is bin/named/named.docbook.
-  * The BIND 9 Administrator Reference Manual is mostly in doc/arm/
-    Bv9ARM-book.xml, plus a few other XML files that are included in it.
-  * API documentation is in the header file describing the API, in
-    Doxygen-formatted comments.
-
-It is not necessary to edit any documentation files other than these; all
-PDF, HTML, and nroff-format man page files will be updated automatically
-from the docbook and XML files after merging.
-
-Patches to improve existing documentation are also very welcome!
-
-Tests
-
-BIND is a large and complex project. We rely heavily on continuous
-automated testing and cannot merge new code without adequate test
-coverage. Please see the 'Testing' section of doc/dev/dev.md for more
-information.
-
-Thanks
-
-Thank you for your interest in contributing to the ongoing development of
-BIND.

CONTRIBUTING.md

@@ -1,206 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-## BIND Source Access and Contributor Guidelines
-*Feb 22, 2018*
-
-### Contents
-
-1. [Access to source code](#access)
-1. [Reporting bugs](#bugs)
-1. [Contributing code](#contrib)
-
-### Introduction
-
-Thank you for using BIND!
-
-BIND is open source software that implements the Domain Name System (DNS)
-protocols for the Internet. It is a reference implementation of those
-protocols, but it is also production-grade software, suitable for use in
-high-volume and high-reliability applications.  It is by far the most
-widely used DNS software, providing a robust and stable platform on top of
-which organizations can build distributed computing systems with the
-knowledge that those systems are fully compliant with published DNS
-standards.
-
-BIND is and will always remain free and openly available.  It can be
-used and modified in any way by anyone.
-
-BIND is maintained by the [Internet Systems Consortium](https://www.isc.org),
-a public-benefit 501(c)(3) nonprofit, using a "managed open source" approach:
-anyone can see the source, but only ISC employees have commit access.
-Until recently, the source could only be seen once ISC had published
-a release: read access to the source repository was restricted just
-as commit access was.  That's now changing, with the opening of a
-public git mirror to the BIND source tree (see below).
-
-### <a name="access"></a>Access to source code
-
-Public BIND releases are always available from the
-[ISC FTP site](ftp://ftp.isc.org/isc/bind9).
-
-A public-access GIT repository is also available at
-[https://gitlab.isc.org](https://gitlab.isc.org).
-This repository is a mirror, updated several times per day, of the
-source repository maintained by ISC.  It contains all the public release
-branches; upcoming releases can be viewed in their current state at any
-time.  It does *not* contain development branches or unreviewed work in
-progress.  Commits which address security vulnerablilities are withheld
-until after public disclosure.
-
-You can browse the source online via
-[https://gitlab.isc.org/isc-projects/bind9](https://gitlab.isc.org/isc-projects/bind9)
-
-To clone the repository, use:
-
->       $ git clone https://gitlab.isc.org/isc-projects/bind9.git
-
-Release branch names are of the form `v9_X`, where X represents the second
-number in the BIND 9 version number.  So, to check out the BIND 9.12
-branch, use:
-
->       $ git checkout v9_12
-
-Whenever a branch is ready for publication, a tag will be placed of the
-form `v9_X_Y`.  The 9.12.0 release, for instance, is tagged as `v9_12_0`.
-
-The branch in which the next major release is being developed is called
-`master`.
-
-### <a name="bugs"></a>Reporting bugs
-
-Reports of flaws in the BIND package, including software bugs, errors
-in the documentation, missing files in the tarball, suggested changes
-or requests for new features, etc, can be filed using
-[https://gitlab.isc.org/isc-projects/bind9/issues](https://gitlab.isc.org/isc-projects/bind9/issues).
-
-Due to a large ticket backlog, we are sometimes slow to respond,
-especially if a bug is cosmetic or if a feature request is vague or
-low in priority, but we will try at least to acknowledge legitimate
-bug reports within a week.
-
-ISC's ticketing system is publicly readable; however, you must have
-an account to file a new issue. You can either register locally or
-use credentials from an existing account at GitHub, GitLab, Google,
-Twitter, or Facebook.
-
-### Reporting possible security issues
-If you think you may be seeing a potential security vulnerability in BIND
-(for example, a crash with REQUIRE, INSIST, or ASSERT failure), please
-report it immediately by emailing to security-officer@isc.org. Plain-text
-e-mail is not a secure choice for communications concerning undisclosed
-security issues so please encrypt your communications to us if possible,
-using the [ISC Security Officer public key](https://www.isc.org/downloads/software-support-policy/openpgp-key/).
-
-Do not discuss undisclosed security vulnerabilites on any public mailing list.
-ISC has a long history of handling reported vulnerabilities promptly and
-effectively and we respect and acknowledge responsible reporters.
-
-ISC's Security Vulnerability Disclosure Policy is documented at [https://kb.isc.org/article/AA-00861/0](https://kb.isc.org/article/AA-00861/0).
-
-If you have a crash, you may want to consult
-[‘What to do if your BIND or DHCP server has crashed.’](https://kb.isc.org/article/AA-00340/89/What-to-do-if-your-BIND-or-DHCP-server-has-crashed.html)
-
-### <a name="bugs"></a>Contributing code
-
-BIND is licensed under the
-[Mozilla Public License 2.0](http://www.isc.org/downloads/software-support-policy/isc-license/).
-Earier versions (BIND 9.10 and earlier) were licensed under the [ISC License](http://www.isc.org/downloads/software-support-policy/isc-license/)
-
-ISC does not require an explicit copyright assignment for patch
-contributions.  However, by submitting a patch to ISC, you implicitly
-certify that you are the author of the code, that you intend to reliquish
-exclusive copyright, and that you grant permission to publish your work
-under the open source license used for the BIND version(s) to which your
-patch will be applied.
-
-#### <a name="bind"></a>BIND code
-
-Patches for BIND may be submitted directly via merge requests in
-[ISC's Gitlab](https://gitlab.isc.org/isc-projects/bind9/) source
-repository for BIND.
-
-Patches can also be submitted as diffs against a specific version of
-BIND -- preferably the current top of the `master` branch.  Diffs may
-be generated using either `git format-patch` or `git diff`.
-
-Those wanting to write code for BIND may be interested in the
-[developer information](doc/dev/dev.md) page, which includes information
-about BIND design and coding practices, including discussion of internal
-APIs and overall system architecture.  (This is a work in progress, and
-still quite preliminary.)
-
-Every patch submitted will be reviewed by ISC engineers following our
-[code review process](doc/dev/dev.md#reviews) before it is merged.
-
-It may take considerable time to review patch submissions, especially if
-they don't meet ISC style and quality guidelines.  If a patch is a good
-idea, we can and will do additional work to bring it up to par, but if
-we're busy with other work, it may take us a long time to get to it.
-
-To ensure your patch is acted on as promptly as possible, please:
-
-* Try to adhere to the [BIND 9 coding style](doc/dev/style.md).
-* Run `make` `check` to ensure your change hasn't caused any
-  functional regressions.
-* Document your work, both in the patch itself and in the
-  accompanying email.
-* In patches that make non-trivial functional changes, include system
-  tests if possible; when introducing or substantially altering a
-  library API, include unit tests. See [Testing](doc/dev/dev.md#testing)
-  for more information.
-
-##### Changes to `configure`
-
-If you need to make changes to `configure`, you should not edit it
-directly; instead, edit `configure.in`, then run `autoconf`.  Similarly,
-instead of editing `config.h.in` directly, edit `configure.in` and run
-`autoheader`.
-
-When submitting a patch as a diff, it's fine to omit the `configure`
-diffs to save space.  Just send the `configure.in` diffs and we'll
-generate the new `configure` during the review process.
-
-##### Documentation
-
-All functional changes should be documented. There are three types
-of documentation in the BIND source tree:
-
-* Man pages are kept alongside the source code for the commands
-  they document, in files ending in `.docbook`; for example, the
-  `named` man page is `bin/named/named.docbook`.
-* The *BIND 9 Administrator Reference Manual* is mostly in
-  `doc/arm/Bv9ARM-book.xml`, plus a few other XML files that are included
-  in it.
-* API documentation is in the header file describing the API, in
-  Doxygen-formatted comments.
-
-It is not necessary to edit any documentation files other than these;
-all PDF, HTML, and `nroff`-format man page files will be updated
-automatically from the `docbook` and `XML` files after merging.
-
-Patches to improve existing documentation are also very welcome!
-
-##### Tests
-
-BIND is a large and complex project. We rely heavily on continuous
-automated testing and cannot merge new code without adequate test coverage.
-Please see [the 'Testing' section of doc/dev/dev.md](doc/dev/dev.md#testing)
-for more information.
-
-#### Thanks
-
-Thank you for your interest in contributing to the ongoing development
-of BIND.

COPYRIGHT

@@ -1,4 +1,5 @@
-Copyright (C) 1996-2018  Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 2004-2011  Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 1996-2003  Internet Software Consortium.
 
 Permission to use, copy, modify, and/or distribute this software for any
 purpose with or without fee is hereby granted, provided that the above
@@ -12,6 +13,8 @@ LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
 OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 PERFORMANCE OF THIS SOFTWARE.
 
+$Id: COPYRIGHT,v 1.17.14.1 2011/02/22 06:34:47 marka Exp $
+
 	Portions of this code release fall under one or more of the
 	following Copyright notices.  Please see individual source
 	files for details.
@@ -96,7 +99,11 @@ are met:
 2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in the
    documentation and/or other materials provided with the distribution.
-3. Neither the name of the University nor the names of its contributors
+3. All advertising materials mentioning features or use of this software
+   must display the following acknowledgement:
+     This product includes software developed by the University of
+     California, Berkeley and its contributors.
+4. Neither the name of the University nor the names of its contributors
    may be used to endorse or promote products derived from this software
    without specific prior written permission.
 
@@ -509,29 +516,3 @@ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 OF THE POSSIBILITY OF SUCH DAMAGE.
 
------------------------------------------------------------------------------
-
-Copyright (c) 1995, 1997, 1998 The NetBSD Foundation, Inc.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-

EXCLUDED

@@ -1,130 +1 @@
-4639.	[bug]		Fix a regression in --with-tuning reporting introduced
-			by change 4488. [RT #45396]
-
-4638.	[bug]		Reloading or reconfiguring named could fail on
-			some platforms when LMDB was in use. [RT #45203]
-
-4630.	[bug]		"dyndb" is dependent on dlopen existing / being
-			enabled. [RT #45291]
-
-4625.	[bug]		Running "rndc addzone" and "rndc delzone" at close
-			to the same time could trigger a deadlock if using
-			LMDB. [RT #45209]
-
-4619.	[bug]		Call isc_mem_put instead of isc_mem_free in
-			bin/named/server.c:setup_newzones. [RT #45202]
-
-4618.	[bug]		Check isc_mem_strdup results in dns_view_setnewzones.
-			Add logging for lmdb call failures. [RT #45204]
-
-4540.	[bug]		Correctly handle ecs entries in dns_acl_isinsecure.
-			[RT #43601]
-
-4531.	[security]	'is_zone' was not being properly updated by redirect2
-			and subsequently preserved leading to an assertion
-			failure. (CVE-2016-9778) [RT #43837]
-
-4520.	[cleanup]	Alphabetize more of the grammar when printing it
-			out. Fix unbalanced indenting. [RT #43755]
-
-4471.	[cleanup]	Render client/query logging format consistent for
-			ease of log file parsing. (Note that this affects
-			"querylog" format: there is now an additional field
-			indicating the client object address.) [RT #43238]
-
-4425.	[bug]		arpaname, dnstap-read and named-rrchecker were not
-			being installed into ${prefix}/bin.  Tidy up
-			installation issues with CHANGE 4421. [RT #42910]
-
-4348.	[func]		dnssec-keymgr: A new python-based DNSSEC key
-			management utility, which reads a policy definition
-			file and can create or update DNSSEC keys as needed
-			to ensure that a zone's keys match policy, roll over
-			correctly on schedule, etc.  Thanks to Sebastian
-			Castro for assistance in development. [RT #39211]
-
-4307.	[bug]		"dig +subnet" and "mdig +subnet" could send
-			incorrectly-formatted Client Subnet options
-			if the prefix length was not divisible by 8.
-			Also fixed a memory leak in "mdig". [RT #45178]
-
-4303.	[bug]		"dig +subnet" was unable to send a prefix length of
-			zero, as it was incorrectly changed to 32 for v4
-			prefixes or 128 for v6 prefixes. In addition to
-			fixing this, "dig +subnet=0" has been added as a
-			short form for 0.0.0.0/0. The same changes have
-			also been made in "mdig". [RT #41553]
-
-4300.	[bug]		A flag could be set in the wrong field when setting
-			up non-recursive queries; this could cause the
-			SERVFAIL cache to cache responses it shouldn't.
-			New querytrace logging has been added which
-			identified this error. [RT #41155]
-
-4161.	[test]		Add JSON test for traffic size stats; also test
-			for consistency between "rndc stats" and the XML
-			and JSON statistics channel contents. [RT #38700]
-
-4135.	[cleanup]	Log expired NTA at startup. [RT #39680]
-
-4056.	[bug]		Expanded automatic testing of trust anchor
-			management and fixed several small bugs including
-			a memory leak and a possible loss of key state
-			information. [RT #38458]
-
-3983.	[bug]		Change #3940 was incomplete: negative trust anchors
-			could be set to last up to a week, but the
-			"nta-lifetime" and "nta-recheck" options were
-			still limited to one day. [RT #37522]
-
-3979.	[bug]		Negative trust anchor fetches were not properly
-			managed. [RT #37488]
-
-3977.	[cleanup]	"rndc secroots" reported a "not found" error when
-			there were no negative trust anchors set. [RT #37506]
-
-3949.	[experimental]	Experimental support for draft-andrews-edns1 by sending
-			EDNS(1) queries (define DRAFT_ANDREWS_EDNS1 when
-			building).  Add support for limiting the EDNS version
-			advertised to servers: server { edns-version 0; };
-			Log the EDNS version received in the query log.
-			[RT #35864]
-
-3938.	[func]		Added quotas to be used in recursive resolvers
-			that are under high query load for names in zones
-			whose authoritative servers are nonresponsive or
-			are experiencing a denial of service attack.
-
-			- "fetches-per-server" limits the number of
-			  simultaneous queries that can be sent to any
-			  single authoritative server.  The configured
-			  value is a starting point; it is automatically
-			  adjusted downward if the server is partially or
-			  completely non-responsive. The algorithm used to
-			  adjust the quota can be configured via the
-			  "fetch-quota-params" option.
-			- "fetches-per-zone" limits the number of
-			  simultaneous queries that can be sent for names
-			  within a single domain.  (Note: Unlike
-			  "fetches-per-server", this value is not
-			  self-tuning.)
-			- New stats counters have been added to count
-			  queries spilled due to these quotas.
-
-			See the ARM for details of these options. [RT #37125]
-
-3930.	[bug]		"rndc nta -r" could cause a server hang if the
-			NTA was not found. [RT #36909]
-
-3920.	[doc]		Added doc for masterfile-style. [RT #36823]
-
-3876.	[bug]		Improve efficiency of DLZ redirect zones by
-			suppressing unnecessary database lookups. [RT #35835]
-
-3875.	[cleanup]	Clarify log message when unable to read private
-			key files. [RT #24702]
-
-3821.	[contrib]	Added a new "mysqldyn" DLZ module with dynamic
-			update and transaction support. Thanks to Marty
-			Lee for the contribution. [RT #35656]
-
+3045.	[removed]	Replaced by change #3050.

FAQ

@@ -0,0 +1,893 @@
+Frequently Asked Questions about BIND 9
+
+Copyright © 2004-2010 Internet Systems Consortium, Inc. ("ISC")
+
+Copyright © 2000-2003 Internet Software Consortium.
+
+-----------------------------------------------------------------------
+
+1. Compilation and Installation Questions
+
+Q: I'm trying to compile BIND 9, and "make" is failing due to files not
+   being found. Why?
+
+A: Using a parallel or distributed "make" to build BIND 9 is not
+   supported, and doesn't work. If you are using one of these, use normal
+   make or gmake instead.
+
+Q: Isn't "make install" supposed to generate a default named.conf?
+
+A: Short Answer: No.
+
+   Long Answer: There really isn't a default configuration which fits any
+   site perfectly. There are lots of decisions that need to be made and
+   there is no consensus on what the defaults should be. For example
+   FreeBSD uses /etc/namedb as the location where the configuration files
+   for named are stored. Others use /var/named.
+
+   What addresses to listen on? For a laptop on the move a lot you may
+   only want to listen on the loop back interfaces.
+
+   Who do you offer recursive service to? Is there are firewall to
+   consider? If so is it stateless or stateful. Are you directly on the
+   Internet? Are you on a private network? Are you on a NAT'd network? The
+   answers to all these questions change how you configure even a caching
+   name server.
+
+2. Configuration and Setup Questions
+
+Q: Why does named log the warning message "no TTL specified - using SOA
+   MINTTL instead"?
+
+A: Your zone file is illegal according to RFC1035. It must either have a
+   line like:
+
+   $TTL 86400
+
+   at the beginning, or the first record in it must have a TTL field, like
+   the "84600" in this example:
+
+   example.com. 86400 IN SOA ns hostmaster ( 1 3600 1800 1814400 3600 )
+
+Q: Why do I get errors like "dns_zone_load: zone foo/IN: loading master
+   file bar: ran out of space"?
+
+A: This is often caused by TXT records with missing close quotes. Check
+   that all TXT records containing quoted strings have both open and close
+   quotes.
+
+Q: How do I restrict people from looking up the server version?
+
+A: Put a "version" option containing something other than the real version
+   in the "options" section of named.conf. Note doing this will not
+   prevent attacks and may impede people trying to diagnose problems with
+   your server. Also it is possible to "fingerprint" nameservers to
+   determine their version.
+
+Q: How do I restrict only remote users from looking up the server version?
+
+A: The following view statement will intercept lookups as the internal
+   view that holds the version information will be matched last. The
+   caveats of the previous answer still apply, of course.
+
+   view "chaos" chaos {
+           match-clients { <those to be refused>; };
+           allow-query { none; };
+           zone "." {
+                   type hint;
+                   file "/dev/null";  // or any empty file
+           };
+   };
+
+Q: What do "no source of entropy found" or "could not open entropy source
+   foo" mean?
+
+A: The server requires a source of entropy to perform certain operations,
+   mostly DNSSEC related. These messages indicate that you have no source
+   of entropy. On systems with /dev/random or an equivalent, it is used by
+   default. A source of entropy can also be defined using the
+   random-device option in named.conf.
+
+Q: I'm trying to use TSIG to authenticate dynamic updates or zone
+   transfers. I'm sure I have the keys set up correctly, but the server is
+   rejecting the TSIG. Why?
+
+A: This may be a clock skew problem. Check that the the clocks on the
+   client and server are properly synchronised (e.g., using ntp).
+
+Q: I see a log message like the following. Why?
+
+   couldn't open pid file '/var/run/named.pid': Permission denied
+
+A: You are most likely running named as a non-root user, and that user
+   does not have permission to write in /var/run. The common ways of
+   fixing this are to create a /var/run/named directory owned by the named
+   user and set pid-file to "/var/run/named/named.pid", or set pid-file to
+   "named.pid", which will put the file in the directory specified by the
+   directory option (which, in this case, must be writable by the named
+   user).
+
+Q: I can query the nameserver from the nameserver but not from other
+   machines. Why?
+
+A: This is usually the result of the firewall configuration stopping the
+   queries and / or the replies.
+
+Q: How can I make a server a slave for both an internal and an external
+   view at the same time? When I tried, both views on the slave were
+   transferred from the same view on the master.
+
+A: You will need to give the master and slave multiple IP addresses and
+   use those to make sure you reach the correct view on the other machine.
+
+   Master: 10.0.1.1 (internal), 10.0.1.2 (external, IP alias)
+       internal:
+           match-clients { !10.0.1.2; !10.0.1.4; 10.0.1/24; };
+                   notify-source 10.0.1.1;
+                   transfer-source 10.0.1.1;
+                   query-source address 10.0.1.1;
+       external:
+           match-clients { any; };
+           recursion no;   // don't offer recursion to the world
+           notify-source 10.0.1.2;
+           transfer-source 10.0.1.2;
+           query-source address 10.0.1.2;
+
+   Slave: 10.0.1.3 (internal), 10.0.1.4 (external, IP alias)
+       internal:
+           match-clients { !10.0.1.2; !10.0.1.4; 10.0.1/24; };
+           notify-source 10.0.1.3;
+           transfer-source 10.0.1.3;
+           query-source address 10.0.1.3;
+      external:
+           match-clients { any; };
+           recursion no;   // don't offer recursion to the world
+           notify-source 10.0.1.4;
+           transfer-source 10.0.1.4;
+           query-source address 10.0.1.4;
+
+   You put the external address on the alias so that all the other dns
+   clients on these boxes see the internal view by default.
+
+A: BIND 9.3 and later: Use TSIG to select the appropriate view.
+
+   Master 10.0.1.1:
+           key "external" {
+                   algorithm hmac-sha256;
+                   secret "xxxxxxxxxxxxxxxxxxxxxxxx";
+           };
+           view "internal" {
+                   match-clients { !key external; // reject message ment for the
+                                                  // external view.
+                                   10.0.1/24; };  // accept from these addresses.
+                   ...
+           };
+           view "external" {
+                   match-clients { key external; any; };
+                   server 10.0.1.2 { keys external; };  // tag messages from the
+                                                        // external view to the
+                                                        // other servers for the
+                                                        // view.
+                   recursion no;
+                   ...
+           };
+
+   Slave 10.0.1.2:
+           key "external" {
+                   algorithm hmac-sha256;
+                   secret "xxxxxxxxxxxxxxxxxxxxxxxx";
+           };
+           view "internal" {
+                   match-clients { !key external; 10.0.1/24; };
+                   ...
+           };
+           view "external" {
+                   match-clients { key external; any; };
+                   server 10.0.1.1 { keys external; };
+                   recursion no;
+                   ...
+           };
+
+Q: I get error messages like "multiple RRs of singleton type" and "CNAME
+   and other data" when transferring a zone. What does this mean?
+
+A: These indicate a malformed master zone. You can identify the exact
+   records involved by transferring the zone using dig then running
+   named-checkzone on it.
+
+   dig axfr example.com @master-server > tmp
+   named-checkzone example.com tmp
+
+   A CNAME record cannot exist with the same name as another record except
+   for the DNSSEC records which prove its existence (NSEC).
+
+   RFC 1034, Section 3.6.2: "If a CNAME RR is present at a node, no other
+   data should be present; this ensures that the data for a canonical name
+   and its aliases cannot be different. This rule also insures that a
+   cached CNAME can be used without checking with an authoritative server
+   for other RR types."
+
+Q: I get error messages like "named.conf:99: unexpected end of input"
+   where 99 is the last line of named.conf.
+
+A: There are unbalanced quotes in named.conf.
+
+A: Some text editors (notepad and wordpad) fail to put a line title
+   indication (e.g. CR/LF) on the last line of a text file. This can be
+   fixed by "adding" a blank line to the end of the file. Named expects to
+   see EOF immediately after EOL and treats text files where this is not
+   met as truncated.
+
+Q: How do I share a dynamic zone between multiple views?
+
+A: You choose one view to be master and the second a slave and transfer
+   the zone between views.
+
+   Master 10.0.1.1:
+           key "external" {
+                   algorithm hmac-sha256;
+                   secret "xxxxxxxxxxxxxxxxxxxxxxxx";
+           };
+
+           key "mykey" {
+                   algorithm hmac-sha256;
+                   secret "yyyyyyyyyyyyyyyyyyyyyyyy";
+           };
+
+           view "internal" {
+                   match-clients { !key external; 10.0.1/24; };
+                   server 10.0.1.1 {
+                           /* Deliver notify messages to external view. */
+                           keys { external; };
+                   };
+                   zone "example.com" {
+                           type master;
+                           file "internal/example.db";
+                           allow-update { key mykey; };
+                           also-notify { 10.0.1.1; };
+                   };
+           };
+
+           view "external" {
+                   match-clients { key external; any; };
+                   zone "example.com" {
+                           type slave;
+                           file "external/example.db";
+                           masters { 10.0.1.1; };
+                           transfer-source 10.0.1.1;
+                           // allow-update-forwarding { any; };
+                           // allow-notify { ... };
+                   };
+           };
+
+Q: I get a error message like "zone wireless.ietf56.ietf.org/IN: loading
+   master file primaries/wireless.ietf56.ietf.org: no owner".
+
+A: This error is produced when a line in the master file contains leading
+   white space (tab/space) but the is no current record owner name to
+   inherit the name from. Usually this is the result of putting white
+   space before a comment, forgetting the "@" for the SOA record, or
+   indenting the master file.
+
+Q: Why are my logs in GMT (UTC).
+
+A: You are running chrooted (-t) and have not supplied local timezone
+   information in the chroot area.
+
+   FreeBSD: /etc/localtime
+   Solaris: /etc/TIMEZONE and /usr/share/lib/zoneinfo
+   OSF: /etc/zoneinfo/localtime
+
+   See also tzset(3) and zic(8).
+
+Q: I get "rndc: connect failed: connection refused" when I try to run
+   rndc.
+
+A: This is usually a configuration error.
+
+   First ensure that named is running and no errors are being reported at
+   startup (/var/log/messages or equivalent). Running "named -g <usual
+   arguments>" from a title can help at this point.
+
+   Secondly ensure that named is configured to use rndc either by
+   "rndc-confgen -a", rndc-confgen or manually. The Administrators
+   Reference manual has details on how to do this.
+
+   Old versions of rndc-confgen used localhost rather than 127.0.0.1 in /
+   etc/rndc.conf for the default server. Update /etc/rndc.conf if
+   necessary so that the default server listed in /etc/rndc.conf matches
+   the addresses used in named.conf. "localhost" has two address
+   (127.0.0.1 and ::1).
+
+   If you use "rndc-confgen -a" and named is running with -t or -u ensure
+   that /etc/rndc.conf has the correct ownership and that a copy is in the
+   chroot area. You can do this by re-running "rndc-confgen -a" with
+   appropriate -t and -u arguments.
+
+Q: I get "transfer of 'example.net/IN' from 192.168.4.12#53: failed while
+   receiving responses: permission denied" error messages.
+
+A: These indicate a filesystem permission error preventing named creating
+   / renaming the temporary file. These will usually also have other
+   associated error messages like
+
+   "dumping master file: sl/tmp-XXXX5il3sQ: open: permission denied"
+
+   Named needs write permission on the directory containing the file.
+   Named writes the new cache file to a temporary file then renames it to
+   the name specified in named.conf to ensure that the contents are always
+   complete. This is to prevent named loading a partial zone in the event
+   of power failure or similar interrupting the write of the master file.
+
+   Note file names are relative to the directory specified in options and
+   any chroot directory ([<chroot dir>/][<options dir>]).
+
+   If named is invoked as "named -t /chroot/DNS" with the following
+   named.conf then "/chroot/DNS/var/named/sl" needs to be writable by the
+   user named is running as.
+
+   options {
+           directory "/var/named";
+   };
+
+   zone "example.net" {
+           type slave;
+           file "sl/example.net";
+           masters { 192.168.4.12; };
+   };
+
+Q: I want to forward all DNS queries from my caching nameserver to another
+   server. But there are some domains which have to be served locally, via
+   rbldnsd.
+
+   How do I achieve this ?
+
+A: options {
+           forward only;
+           forwarders { <ip.of.primary.nameserver>; };
+   };
+
+   zone "sbl-xbl.spamhaus.org" {
+           type forward; forward only;
+           forwarders { <ip.of.rbldns.server> port 530; };
+   };
+
+   zone "list.dsbl.org" {
+           type forward; forward only;
+           forwarders { <ip.of.rbldns.server> port 530; };
+   };
+
+
+Q: Can you help me understand how BIND 9 uses memory to store DNS zones?
+
+   Some times it seems to take several times the amount of memory it needs
+   to store the zone.
+
+A: When reloading a zone named my have multiple copies of the zone in
+   memory at one time. The zone it is serving and the one it is loading.
+   If reloads are ultra fast it can have more still.
+
+   e.g. Ones that are transferring out, the one that it is serving and the
+   one that is loading.
+
+   BIND 8 destroyed the zone before loading and also killed off outgoing
+   transfers of the zone.
+
+   The new strategy allows slaves to get copies of the new zone regardless
+   of how often the master is loaded compared to the transfer time. The
+   slave might skip some intermediate versions but the transfers will
+   complete and it will keep reasonably in sync with the master.
+
+   The new strategy also allows the master to recover from syntax and
+   other errors in the master file as it still has an in-core copy of the
+   old contents.
+
+Q: I want to use IPv6 locally but I don't have a external IPv6 connection.
+   External lookups are slow.
+
+A: You can use server clauses to stop named making external lookups over
+   IPv6.
+
+   server fd81:ec6c:bd62::/48 { bogus no; }; // site ULA prefix
+   server ::/0 { bogus yes; };
+
+3. Operations Questions
+
+Q: How to change the nameservers for a zone?
+
+A: Step 1: Ensure all nameservers, new and old, are serving the same zone
+   content.
+
+   Step 2: Work out the maximum TTL of the NS RRset in the parent and
+   child zones. This is the time it will take caches to be clear of a
+   particular version of the NS RRset. If you are just removing
+   nameservers you can skip to Step 6.
+
+   Step 3: Add new nameservers to the NS RRset for the zone and wait until
+   all the servers for the zone are answering with this new NS RRset.
+
+   Step 4: Inform the parent zone of the new NS RRset then wait for all
+   the parent servers to be answering with the new NS RRset.
+
+   Step 5: Wait for cache to be clear of the old NS RRset. See Step 2 for
+   how long. If you are just adding nameservers you are done.
+
+   Step 6: Remove any old nameservers from the zones NS RRset and wait for
+   all the servers for the zone to be serving the new NS RRset.
+
+   Step 7: Inform the parent zone of the new NS RRset then wait for all
+   the parent servers to be answering with the new NS RRset.
+
+   Step 8: Wait for cache to be clear of the old NS RRset. See Step 2 for
+   how long.
+
+   Step 9: Turn off the old nameservers or remove the zone entry from the
+   configuration of the old nameservers.
+
+   Step 10: Increment the serial number and wait for the change to be
+   visible in all nameservers for the zone. This ensures that zone
+   transfers are still working after the old servers are decommissioned.
+
+   Note: the above procedure is designed to be transparent to dns clients.
+   Decommissioning the old servers too early will result in some clients
+   not being able to look up answers in the zone.
+
+   Note: while it is possible to run the addition and removal stages
+   together it is not recommended.
+
+4. General Questions
+
+Q: I keep getting log messages like the following. Why?
+
+   Dec 4 23:47:59 client 10.0.0.1#1355: updating zone 'example.com/IN':
+   update failed: 'RRset exists (value dependent)' prerequisite not
+   satisfied (NXRRSET)
+
+A: DNS updates allow the update request to test to see if certain
+   conditions are met prior to proceeding with the update. The message
+   above is saying that conditions were not met and the update is not
+   proceeding. See doc/rfc/rfc2136.txt for more details on prerequisites.
+
+Q: I keep getting log messages like the following. Why?
+
+   Jun 21 12:00:00.000 client 10.0.0.1#1234: update denied
+
+A: Someone is trying to update your DNS data using the RFC2136 Dynamic
+   Update protocol. Windows 2000 machines have a habit of sending dynamic
+   update requests to DNS servers without being specifically configured to
+   do so. If the update requests are coming from a Windows 2000 machine,
+   see <http://support.microsoft.com/support/kb/articles/q246/8/04.asp>
+   for information about how to turn them off.
+
+Q: When I do a "dig . ns", many of the A records for the root servers are
+   missing. Why?
+
+A: This is normal and harmless. It is a somewhat confusing side effect of
+   the way BIND 9 does RFC2181 trust ranking and of the efforts BIND 9
+   makes to avoid promoting glue into answers.
+
+   When BIND 9 first starts up and primes its cache, it receives the root
+   server addresses as additional data in an authoritative response from a
+   root server, and these records are eligible for inclusion as additional
+   data in responses. Subsequently it receives a subset of the root server
+   addresses as additional data in a non-authoritative (referral) response
+   from a root server. This causes the addresses to now be considered
+   non-authoritative (glue) data, which is not eligible for inclusion in
+   responses.
+
+   The server does have a complete set of root server addresses cached at
+   all times, it just may not include all of them as additional data,
+   depending on whether they were last received as answers or as glue. You
+   can always look up the addresses with explicit queries like "dig
+   a.root-servers.net A".
+
+Q: Why don't my zones reload when I do an "rndc reload" or SIGHUP?
+
+A: A zone can be updated either by editing zone files and reloading the
+   server or by dynamic update, but not both. If you have enabled dynamic
+   update for a zone using the "allow-update" option, you are not supposed
+   to edit the zone file by hand, and the server will not attempt to
+   reload it.
+
+Q: Why is named listening on UDP port other than 53?
+
+A: Named uses a system selected port to make queries of other nameservers.
+   This behaviour can be overridden by using query-source to lock down the
+   port and/or address. See also notify-source and transfer-source.
+
+Q: I get warning messages like "zone example.com/IN: refresh: failure
+   trying master 1.2.3.4#53: timed out".
+
+A: Check that you can make UDP queries from the slave to the master
+
+   dig +norec example.com soa @1.2.3.4
+
+   You could be generating queries faster than the slave can cope with.
+   Lower the serial query rate.
+
+   serial-query-rate 5; // default 20
+
+Q: I don't get RRSIG's returned when I use "dig +dnssec".
+
+A: You need to ensure DNSSEC is enabled (dnssec-enable yes;).
+
+Q: Can a NS record refer to a CNAME.
+
+A: No. The rules for glue (copies of the *address* records in the parent
+   zones) and additional section processing do not allow it to work.
+
+   You would have to add both the CNAME and address records (A/AAAA) as
+   glue to the parent zone and have CNAMEs be followed when doing
+   additional section processing to make it work. No nameserver
+   implementation supports either of these requirements.
+
+Q: What does "RFC 1918 response from Internet for 0.0.0.10.IN-ADDR.ARPA"
+   mean?
+
+A: If the IN-ADDR.ARPA name covered refers to a internal address space you
+   are using then you have failed to follow RFC 1918 usage rules and are
+   leaking queries to the Internet. You should establish your own zones
+   for these addresses to prevent you querying the Internet's name servers
+   for these addresses. Please see <http://as112.net/> for details of the
+   problems you are causing and the counter measures that have had to be
+   deployed.
+
+   If you are not using these private addresses then a client has queried
+   for them. You can just ignore the messages, get the offending client to
+   stop sending you these messages as they are most probably leaking them
+   or setup your own zones empty zones to serve answers to these queries.
+
+   zone "10.IN-ADDR.ARPA" {
+           type master;
+           file "empty";
+   };
+
+   zone "16.172.IN-ADDR.ARPA" {
+           type master;
+           file "empty";
+   };
+
+   ...
+
+   zone "31.172.IN-ADDR.ARPA" {
+           type master;
+           file "empty";
+   };
+
+   zone "168.192.IN-ADDR.ARPA" {
+           type master;
+           file "empty";
+   };
+
+   empty:
+   @ 10800 IN SOA <name-of-server>. <contact-email>. (
+                  1 3600 1200 604800 10800 )
+   @ 10800 IN NS <name-of-server>.
+
+   Note
+
+   Future versions of named are likely to do this automatically.
+
+Q: Will named be affected by the 2007 changes to daylight savings rules in
+   the US.
+
+A: No, so long as the machines internal clock (as reported by "date -u")
+   remains at UTC. The only visible change if you fail to upgrade your OS,
+   if you are in a affected area, will be that log messages will be a hour
+   out during the period where the old rules do not match the new rules.
+
+   For most OS's this change just means that you need to update the
+   conversion rules from UTC to local time. Normally this involves
+   updating a file in /etc (which sets the default timezone for the
+   machine) and possibly a directory which has all the conversion rules
+   for the world (e.g. /usr/share/zoneinfo). When updating the OS do not
+   forget to update any chroot areas as well. See your OS's documentation
+   for more details.
+
+   The local timezone conversion rules can also be done on a individual
+   basis by setting the TZ environment variable appropriately. See your
+   OS's documentation for more details.
+
+Q: Is there a bugzilla (or other tool) database that mere mortals can have
+   (read-only) access to for bind?
+
+A: No. The BIND 9 bug database is kept closed for a number of reasons.
+   These include, but are not limited to, that the database contains
+   proprietory information from people reporting bugs. The database has in
+   the past and may in future contain unfixed bugs which are capable of
+   bringing down most of the Internet's DNS infrastructure.
+
+   The release pages for each version contain up to date lists of bugs
+   that have been fixed post release. That is as close as we can get to
+   providing a bug database.
+
+Q: Why do queries for NSEC3 records fail to return the NSEC3 record?
+
+A: NSEC3 records are strictly meta data and can only be returned in the
+   authority section. This is done so that signing the zone using NSEC3
+   records does not bring names into existence that do not exist in the
+   unsigned version of the zone.
+
+5. Operating-System Specific Questions
+
+5.1. HPUX
+
+Q: I get the following error trying to configure BIND:
+
+   checking if unistd.h or sys/types.h defines fd_set... no
+   configure: error: need either working unistd.h or sys/select.h
+
+A: You have attempted to configure BIND with the bundled C compiler. This
+   compiler does not meet the minimum compiler requirements to for
+   building BIND. You need to install a ANSI C compiler and / or teach
+   configure how to find the ANSI C compiler. The later can be done by
+   adjusting the PATH environment variable and / or specifying the
+   compiler via CC.
+
+   ./configure CC=<compiler> ...
+
+5.2. Linux
+
+Q: Why do I get the following errors:
+
+   general: errno2result.c:109: unexpected error:
+   general: unable to convert errno to isc_result: 14: Bad address
+   client: UDP client handler shutting down due to fatal receive error: unexpected error
+
+A: This is the result of a Linux kernel bug.
+
+   See: <http://marc.theaimsgroup.com/?l=linux-netdev&m=113081708031466&w=
+   2>
+
+Q: Why does named lock up when it attempts to connect over IPSEC tunnels?
+
+A: This is due to a kernel bug where the fact that a socket is marked
+   non-blocking is ignored. It is reported that setting xfrm_larval_drop
+   to 1 helps but this may have negative side effects. See: <https://
+   bugzilla.redhat.com/show_bug.cgi?id=427629> and <http://lkml.org/lkml/
+   2007/12/4/260>.
+
+   xfrm_larval_drop can be set to 1 by the following procedure:
+
+   echo "1" > proc/sys/net/core/xfrm_larval_drop
+
+Q: Why do I see 5 (or more) copies of named on Linux?
+
+A: Linux threads each show up as a process under ps. The approximate
+   number of threads running is n+4, where n is the number of CPUs. Note
+   that the amount of memory used is not cumulative; if each process is
+   using 10M of memory, only a total of 10M is used.
+
+   Newer versions of Linux's ps command hide the individual threads and
+   require -L to display them.
+
+Q: Why does BIND 9 log "permission denied" errors accessing its
+   configuration files or zones on my Linux system even though it is
+   running as root?
+
+A: On Linux, BIND 9 drops most of its root privileges on startup. This
+   including the privilege to open files owned by other users. Therefore,
+   if the server is running as root, the configuration files and zone
+   files should also be owned by root.
+
+Q: I get the error message "named: capset failed: Operation not permitted"
+   when starting named.
+
+A: The capability module, part of "Linux Security Modules/LSM", has not
+   been loaded into the kernel. See insmod(8), modprobe(8).
+
+   The relevant modules can be loaded by running:
+
+   modprobe commoncap
+   modprobe capability
+
+Q: I'm running BIND on Red Hat Enterprise Linux or Fedora Core -
+
+   Why can't named update slave zone database files?
+
+   Why can't named create DDNS journal files or update the master zones
+   from journals?
+
+   Why can't named create custom log files?
+
+A: Red Hat Security Enhanced Linux (SELinux) policy security protections :
+
+   Red Hat have adopted the National Security Agency's SELinux security
+   policy (see <http://www.nsa.gov/selinux>) and recommendations for BIND
+   security , which are more secure than running named in a chroot and
+   make use of the bind-chroot environment unnecessary .
+
+   By default, named is not allowed by the SELinux policy to write, create
+   or delete any files EXCEPT in these directories:
+
+   $ROOTDIR/var/named/slaves
+   $ROOTDIR/var/named/data
+   $ROOTDIR/var/tmp
+
+
+   where $ROOTDIR may be set in /etc/sysconfig/named if bind-chroot is
+   installed.
+
+   The SELinux policy particularly does NOT allow named to modify the
+   $ROOTDIR/var/named directory, the default location for master zone
+   database files.
+
+   SELinux policy overrules file access permissions - so even if all the
+   files under /var/named have ownership named:named and mode rw-rw-r--,
+   named will still not be able to write or create files except in the
+   directories above, with SELinux in Enforcing mode.
+
+   So, to allow named to update slave or DDNS zone files, it is best to
+   locate them in $ROOTDIR/var/named/slaves, with named.conf zone
+   statements such as:
+
+   zone "slave.zone." IN {
+           type slave;
+           file "slaves/slave.zone.db";
+           ...
+   };
+   zone "ddns.zone." IN  {
+           type master;
+           allow-updates {...};
+           file "slaves/ddns.zone.db";
+   };
+
+
+   To allow named to create its cache dump and statistics files, for
+   example, you could use named.conf options statements such as:
+
+   options {
+           ...
+           dump-file "/var/named/data/cache_dump.db";
+           statistics-file "/var/named/data/named_stats.txt";
+           ...
+   };
+
+
+   You can also tell SELinux to allow named to update any zone database
+   files, by setting the SELinux tunable boolean parameter
+   'named_write_master_zones=1', using the system-config-securitylevel
+   GUI, using the 'setsebool' command, or in /etc/selinux/targeted/
+   booleans.
+
+   You can disable SELinux protection for named entirely by setting the
+   'named_disable_trans=1' SELinux tunable boolean parameter.
+
+   The SELinux named policy defines these SELinux contexts for named:
+
+   named_zone_t : for zone database files       - $ROOTDIR/var/named/*
+   named_conf_t : for named configuration files - $ROOTDIR/etc/{named,rndc}.*
+   named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,data}}
+
+
+   If you want to retain use of the SELinux policy for named, and put
+   named files in different locations, you can do so by changing the
+   context of the custom file locations .
+
+   To create a custom configuration file location, e.g. '/root/
+   named.conf', to use with the 'named -c' option, do:
+
+   # chcon system_u:object_r:named_conf_t /root/named.conf
+
+
+   To create a custom modifiable named data location, e.g. '/var/log/
+   named' for a log file, do:
+
+   # chcon system_u:object_r:named_cache_t /var/log/named
+
+
+   To create a custom zone file location, e.g. /root/zones/, do:
+
+   # chcon system_u:object_r:named_zone_t /root/zones/{.,*}
+
+
+   See these man-pages for more information : selinux(8), named_selinux
+   (8), chcon(1), setsebool(8)
+
+Q: I'm running BIND on Ubuntu -
+
+   Why can't named update slave zone database files?
+
+   Why can't named create DDNS journal files or update the master zones
+   from journals?
+
+   Why can't named create custom log files?
+
+A: Ubuntu uses AppArmor <http://en.wikipedia.org/wiki/AppArmor> in
+   addition to normal file system permissions to protect the system.
+
+   Adjust the paths to use those specified in /etc/apparmor.d/
+   usr.sbin.named or adjust /etc/apparmor.d/usr.sbin.named to allow named
+   to write at the location specified in named.conf.
+
+Q: Listening on individual IPv6 interfaces does not work.
+
+A: This is usually due to "/proc/net/if_inet6" not being available in the
+   chroot file system. Mount another instance of "proc" in the chroot file
+   system.
+
+   This can be be made permanent by adding a second instance to /etc/
+   fstab.
+
+   proc /proc           proc defaults 0 0
+   proc /var/named/proc proc defaults 0 0
+
+5.3. Windows
+
+Q: Zone transfers from my BIND 9 master to my Windows 2000 slave fail.
+   Why?
+
+A: This may be caused by a bug in the Windows 2000 DNS server where DNS
+   messages larger than 16K are not handled properly. This can be worked
+   around by setting the option "transfer-format one-answer;". Also check
+   whether your zone contains domain names with embedded spaces or other
+   special characters, like "John\032Doe\213s\032Computer", since such
+   names have been known to cause Windows 2000 slaves to incorrectly
+   reject the zone.
+
+Q: I get "Error 1067" when starting named under Windows.
+
+A: This is the service manager saying that named exited. You need to
+   examine the Application log in the EventViewer to find out why.
+
+   Common causes are that you failed to create "named.conf" (usually "C:\
+   windows\dns\etc\named.conf") or failed to specify the directory in
+   named.conf.
+
+   options {
+           Directory "C:\windows\dns\etc";
+   };
+
+5.4. FreeBSD
+
+Q: I have FreeBSD 4.x and "rndc-confgen -a" just sits there.
+
+A: /dev/random is not configured. Use rndcontrol(8) to tell the kernel to
+   use certain interrupts as a source of random events. You can make this
+   permanent by setting rand_irqs in /etc/rc.conf.
+
+   rand_irqs="3 14 15"
+
+   See also <http://people.freebsd.org/~dougb/randomness.html>.
+
+5.5. Solaris
+
+Q: How do I integrate BIND 9 and Solaris SMF
+
+A: Sun has a blog entry describing how to do this.
+
+   <http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris>
+
+5.6. Apple Mac OS X
+
+Q: How do I run BIND 9 on Apple Mac OS X?
+
+A: If you run Tiger(Mac OS 10.4) or later then this is all you need to do:
+
+   % sudo rndc-confgen  > /etc/rndc.conf
+
+   Copy the key statement from /etc/rndc.conf into /etc/rndc.key, e.g.:
+
+   key "rndc-key" {
+           algorithm hmac-md5;
+           secret "uvceheVuqf17ZwIcTydddw==";
+   };
+
+   Then start the relevant service:
+
+   % sudo service org.isc.named start
+
+   This is persistent upon a reboot, so you will have to do it only once.
+
+A: Alternatively you can just generate /etc/rndc.key by running:
+
+   % sudo rndc-confgen -a
+
+   Then start the relevant service:
+
+   % sudo service org.isc.named start
+
+   Named will look for /etc/rndc.key when it starts if it doesn't have a
+   controls section or the existing controls are missing keys sub-clauses.
+   This is persistent upon a reboot, so you will have to do it only once.
+

FAQ.xml

@@ -1,5 +1,8 @@
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+       "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" []>
 <!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2003  Internet Software Consortium.
  -
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,20 +17,33 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<article xmlns="http://docbook.org/ns/docbook" version="5.0" class="faq">
+<!-- $Id: FAQ.xml,v 1.54 2010/01/19 23:48:55 tbox Exp $ -->
 
+<article class="faq">
+  <title>Frequently Asked Questions about BIND 9</title>
   <articleinfo>
     <copyright>
-      <year>2017</year>
-      <year>2018</year>
+      <year>2004</year>
+      <year>2005</year>
+      <year>2006</year>
+      <year>2007</year>
+      <year>2008</year>
+      <year>2009</year>
+      <year>2010</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
+    <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
+      <year>2003</year>
+      <holder>Internet Software Consortium.</holder>
+    </copyright>
   </articleinfo>
-  <qandaset defaultlabel="qanda">
-
-    <qandadiv><title>Compilation and Installation Questions</title>
-
+  <qandaset defaultlabel='qanda'>
+	  
+    <qandadiv><title>Compilation and Installation Questions</title>	  
+    
     <qandaentry>
       <question>
 	<para>
@@ -43,7 +59,7 @@
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -52,7 +68,7 @@
       </question>
       <answer>
 	<para>
-	  Short Answer: No.
+	  Short Answer: No. 
 	</para>
 	<para>
 	  Long Answer: There really isn't a default configuration which fits
@@ -66,8 +82,8 @@
 	  you may only want to listen on the loop back interfaces.
 	</para>
 	<para>
-	  To whom do you offer recursive service?  Is there a firewall
-	  to consider?  If so, is it stateless or stateful?  Are you
+	  Who do you offer recursive service to?  Is there are firewall
+	  to consider?  If so is it stateless or stateful.  Are you
 	  directly on the Internet?  Are you on a private network? Are
 	  you on a NAT'd network? The answers
 	  to all these questions change how you configure even a
@@ -75,9 +91,9 @@
 	</para>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- Compilation and Installation Questions -->
-
+	    
     <qandadiv><title>Configuration and Setup Questions</title>
 
     <qandaentry>
@@ -107,7 +123,7 @@ example.com. 86400 IN SOA ns hostmaster ( 1 3600 1800 1814400 3600 )</programlis
 	</informalexample>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <!-- configuration -->
       <question>
@@ -205,7 +221,7 @@ view "chaos" chaos {
       <answer>
 	<para>
 	  This may be a clock skew problem.  Check that the the clocks
-	  on the client and server are properly synchronized (e.g.,
+	  on the client and server are properly synchronised (e.g.,
 	  using ntp).
 	</para>
       </answer>
@@ -229,11 +245,11 @@ view "chaos" chaos {
 	  "/var/run/named/named.pid", or set pid-file to "named.pid",
 	  which will put the file in the directory specified by the
 	  directory option (which, in this case, must be writable by
-	  the user named is running as).
+	  the named user).
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -248,7 +264,7 @@ view "chaos" chaos {
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -341,7 +357,7 @@ Slave 10.0.1.2:
 	</informalexample>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -374,7 +390,7 @@ named-checkzone example.com tmp</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -398,7 +414,7 @@ named-checkzone example.com tmp</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -463,7 +479,7 @@ Master 10.0.1.1:
       <answer>
 	<para>
 	  This error is produced when a line in the master file
-	  contains leading white space (tab/space) but there is no
+	  contains leading white space (tab/space) but the is no
 	  current record owner name to inherit the name from.  Usually
 	  this is the result of putting white space before a comment,
 	  forgetting the "@" for the SOA record, or indenting the master
@@ -483,7 +499,7 @@ Master 10.0.1.1:
 	  You are running chrooted (-t) and have not supplied local timezone
 	  information in the chroot area.
 	</para>
-	<simplelist type="vert">
+	<simplelist>
 	  <member>FreeBSD: /etc/localtime</member>
 	  <member>Solaris: /etc/TIMEZONE and /usr/share/lib/zoneinfo</member>
 	  <member>OSF: /etc/zoneinfo/localtime</member>
@@ -493,7 +509,7 @@ Master 10.0.1.1:
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -533,7 +549,7 @@ Master 10.0.1.1:
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -585,7 +601,7 @@ zone "example.net" {
 	</informalexample>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -676,9 +692,9 @@ server ::/0 { bogus yes; };
 </programlisting>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- Configuration and Setup Questions -->
-
+    
     <qandadiv><title>Operations Questions</title>
 
     <qandaentry>
@@ -750,7 +766,7 @@ server ::/0 { bogus yes; };
     </qandadiv> <!-- Operations Questions -->
 
     <qandadiv><title>General Questions</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -789,13 +805,14 @@ server ::/0 { bogus yes; };
 	  of sending dynamic update requests to DNS servers without
 	  being specifically configured to do so.  If the update
 	  requests are coming from a Windows 2000 machine, see
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://support.microsoft.com/support/kb/articles/q246/8/04.asp">
-  &lt;http://support.microsoft.com/support/kb/articles/q246/8/04.asp&gt;</link>
+	  <ulink
+	   url="http://support.microsoft.com/support/kb/articles/q246/8/04.asp">
+  &lt;http://support.microsoft.com/support/kb/articles/q246/8/04.asp&gt;</ulink>
 	  for information about how to turn them off.
 	</para>
       </answer>
     </qandaentry>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -830,7 +847,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -848,7 +865,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -864,7 +881,7 @@ server ::/0 { bogus yes; };
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -891,7 +908,7 @@ serial-query-rate 5; // default 20</programlisting>
       </answer>
     </qandaentry>
 
-    <qandaentry>
+    <qandaentry>	    
       <question>
 	<para>
 	  I don't get RRSIG's returned when I use "dig +dnssec".
@@ -903,7 +920,7 @@ serial-query-rate 5; // default 20</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -940,7 +957,7 @@ serial-query-rate 5; // default 20</programlisting>
 	  usage rules and are leaking queries to the Internet.  You
 	  should establish your own zones for these addresses to prevent
 	  you querying the Internet's name servers for these addresses.
-	  Please see <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://as112.net/">&lt;http://as112.net/&gt;</link>
+	  Please see <ulink url="http://as112.net/">&lt;http://as112.net/&gt;</ulink>
 	  for details of the problems you are causing and the counter
 	  measures that have had to be deployed.
 	</para>
@@ -987,7 +1004,7 @@ empty:
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1064,9 +1081,9 @@ empty:
     </qandaentry>
 
     </qandadiv> <!-- General Questions -->
-
+    
     <qandadiv><title>Operating-System Specific Questions</title>
-
+	    
     <qandadiv><title>HPUX</title>
 
     <qandaentry>
@@ -1094,9 +1111,9 @@ configure: error: need either working unistd.h or sys/select.h</programlisting>
     </qandadiv> <!-- HPUX -->
 
     <qandadiv><title>Linux</title>
-
+	    
     <qandaentry>
-      <question>
+      <question> 
 	<para>
 	  Why do I get the following errors:
 <programlisting>general: errno2result.c:109: unexpected error:
@@ -1110,7 +1127,7 @@ client: UDP client handler shutting down due to fatal receive error: unexpected
 	</para>
 	<para>
 	  See:
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2">&lt;http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2&gt;</link>
+	  <ulink url="http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2">&lt;http://marc.theaimsgroup.com/?l=linux-netdev&amp;m=113081708031466&amp;w=2&gt;</ulink>
 	</para>
       </answer>
     </qandaentry>
@@ -1127,9 +1144,9 @@ client: UDP client handler shutting down due to fatal receive error: unexpected
 	  non-blocking is ignored.  It is reported that setting
 	  xfrm_larval_drop to 1 helps but this may have negative side effects.
 	  See:
-<link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="https://bugzilla.redhat.com/show_bug.cgi?id=427629">&lt;https://bugzilla.redhat.com/show_bug.cgi?id=427629&gt;</link>
+<ulink url="https://bugzilla.redhat.com/show_bug.cgi?id=427629">&lt;https://bugzilla.redhat.com/show_bug.cgi?id=427629&gt;</ulink>
 	  and
-<link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://lkml.org/lkml/2007/12/4/260">&lt;http://lkml.org/lkml/2007/12/4/260&gt;</link>.
+<ulink url="http://lkml.org/lkml/2007/12/4/260">&lt;http://lkml.org/lkml/2007/12/4/260&gt;</ulink>.
 	</para>
 	<para>
 	xfrm_larval_drop can be set to 1 by the following procedure:
@@ -1159,7 +1176,7 @@ echo "1" &gt; proc/sys/net/core/xfrm_larval_drop</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1178,7 +1195,7 @@ echo "1" &gt; proc/sys/net/core/xfrm_larval_drop</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1199,7 +1216,7 @@ modprobe capability</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1225,7 +1242,8 @@ modprobe capability</programlisting>
 
 	<para>
 	   Red Hat have adopted the National Security Agency's
-	   SELinux security policy (see <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://www.nsa.gov/selinux">&lt;http://www.nsa.gov/selinux&gt;</link>)
+	   SELinux security policy (see <ulink
+   url="http://www.nsa.gov/selinux">&lt;http://www.nsa.gov/selinux&gt;</ulink>)
 	   and recommendations for BIND security , which are more
 	   secure than running named in a chroot and make use of
 	   the bind-chroot environment unnecessary .
@@ -1259,7 +1277,7 @@ $ROOTDIR/var/tmp
 	  able to write or create files except in the directories
 	  above, with SELinux in Enforcing mode.
 	</para>
-
+  
 	<para>
 	  So, to allow named to update slave or DDNS zone files,
 	  it is best to locate them in $ROOTDIR/var/named/slaves,
@@ -1270,7 +1288,7 @@ zone "slave.zone." IN {
 	type slave;
 	file "slaves/slave.zone.db";
 	...
-};
+};   
 zone "ddns.zone." IN  {
 	type master;
 	allow-updates {...};
@@ -1303,13 +1321,13 @@ options {
 	  system-config-securitylevel GUI, using the 'setsebool'
 	  command, or in /etc/selinux/targeted/booleans.
 	</para>
-
+  
 	<para>
 	  You can disable SELinux protection for named entirely by
 	  setting the 'named_disable_trans=1' SELinux tunable boolean
 	  parameter.
 	</para>
-
+    
 	<para>
 	  The SELinux named policy defines these SELinux contexts for named:
 	  <informalexample>
@@ -1320,7 +1338,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+   
 	<para>
 	  If you want to retain use of the SELinux policy for named,
 	  and put named files in different locations, you can do
@@ -1338,7 +1356,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+  
 	<para>
 	  To create a custom modifiable named data location, e.g.
 	  '/var/log/named' for a log file, do:
@@ -1348,7 +1366,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+   
 	<para>
    To create a custom zone file location, e.g. /root/zones/, do:
 	  <informalexample>
@@ -1357,7 +1375,7 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
 	    </programlisting>
 	  </informalexample>
 	</para>
-
+  
 	<para>
 	  See these man-pages for more information : selinux(8),
 	  named_selinux(8), chcon(1), setsebool(8)
@@ -1383,8 +1401,8 @@ named_cache_t: for files modifiable by named - $ROOTDIR/var/{tmp,named/{slaves,d
       </question>
       <answer>
 	<para>
-	  Ubuntu uses AppArmor <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://en.wikipedia.org/wiki/AppArmor">
-          &lt;http://en.wikipedia.org/wiki/AppArmor&gt;</link> in
+	  Ubuntu uses AppArmor <ulink url="http://en.wikipedia.org/wiki/AppArmor">
+          &lt;http://en.wikipedia.org/wiki/AppArmor&gt;</ulink> in
 	  addition to normal file system permissions to protect the system.
 	</para>
 	<para>
@@ -1418,11 +1436,11 @@ proc /var/named/proc proc defaults 0 0</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- Linux -->
-
+    
     <qandadiv><title>Windows</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -1443,7 +1461,7 @@ proc /var/named/proc proc defaults 0 0</programlisting>
 	</para>
       </answer>
     </qandaentry>
-
+    
     <qandaentry>
       <question>
 	<para>
@@ -1469,11 +1487,11 @@ options {
 	</informalexample>
       </answer>
     </qandaentry>
-
+	    
     </qandadiv> <!-- Windows -->
-
+    
     <qandadiv><title>FreeBSD</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -1493,16 +1511,16 @@ rand_irqs="3 14 15"</programlisting>
 	</informalexample>
 	<para>
 	  See also
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://people.freebsd.org/~dougb/randomness.html">
-	  &lt;http://people.freebsd.org/~dougb/randomness.html&gt;</link>.
+	  <ulink url="http://people.freebsd.org/~dougb/randomness.html">
+	  &lt;http://people.freebsd.org/~dougb/randomness.html&gt;</ulink>.
 	</para>
       </answer>
     </qandaentry>
-
+    
     </qandadiv> <!-- FreeBSD -->
-
+    
     <qandadiv><title>Solaris</title>
-
+	    
     <qandaentry>
       <question>
 	<para>
@@ -1514,14 +1532,15 @@ rand_irqs="3 14 15"</programlisting>
 	  Sun has a blog entry describing how to do this.
 	</para>
 	<para>
-	  <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris">
+	  <ulink
+	  url="http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris">
 	 &lt;http://blogs.sun.com/roller/page/anay/Weblog?catname=%2FSolaris&gt;
-	  </link>
+	  </ulink>
 	</para>
       </answer>
     </qandaentry>
-
-    </qandadiv> <!-- Solaris -->
+    
+    </qandadiv>
 
     <qandadiv><title>Apple Mac OS X</title>
 
@@ -1537,7 +1556,7 @@ rand_irqs="3 14 15"</programlisting>
 	</para>
 	<informalexample>
 	  <programlisting>
-% sudo rndc-confgen  &gt; /etc/rndc.conf</programlisting>
+% sudo rndc-confgen  > /etc/rndc.conf</programlisting>
 	</informalexample>
 	<para>
 	  Copy the key statement from /etc/rndc.conf into /etc/rndc.key, e.g.:
@@ -1545,7 +1564,7 @@ rand_irqs="3 14 15"</programlisting>
 	<informalexample>
 	  <programlisting>
 key "rndc-key" {
-	algorithm hmac-sha256;
+	algorithm hmac-md5;
 	secret "uvceheVuqf17ZwIcTydddw==";
 };</programlisting>
 	</informalexample>
@@ -1585,8 +1604,8 @@ key "rndc-key" {
       </answer>
     </qandaentry>
 
-    </qandadiv> <!-- Apple Mac OS X -->
-
+    </qandadiv>
+    
     </qandadiv> <!-- Operating-System Specific Questions -->
 
   </qandaset>

HISTORY

@@ -1,278 +1,313 @@
-Functional enhancements from prior major releases of BIND 9
-
-BIND 9.9.0
-
-BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
-releases. New features include:
-
-  * Inline signing, allowing automatic DNSSEC signing of master zones
-    without modification of the zonefile, or "bump in the wire" signing in
-    slaves.
-  * NXDOMAIN redirection.
-  * New 'rndc flushtree' command clears all data under a given name from
-    the DNS cache.
-  * New 'rndc sync' command dumps pending changes in a dynamic zone to
-    disk without a freeze/thaw cycle.
-  * New 'rndc signing' command displays or clears signing status records
-    in 'auto-dnssec' zones.
-  * NSEC3 parameters for 'auto-dnssec' zones can now be set prior to
-    signing, eliminating the need to initially sign with NSEC.
-  * Startup time improvements on large authoritative servers.
-  * Slave zones are now saved in raw format by default.
-  * Several improvements to response policy zones (RPZ).
-  * Improved hardware scalability by using multiple threads to listen for
-    queries and using finer-grained client locking
-  * The 'also-notify' option now takes the same syntax as 'masters', so it
-    can used named masterlists and TSIG keys.
-  * 'dnssec-signzone -D' writes an output file containing only DNSSEC
-    data, which can be included by the primary zone file.
-  * 'dnssec-signzone -R' forces removal of signatures that are not expired
-    but were created by a key which no longer exists.
-  * 'dnssec-signzone -X' allows a separate expiration date to be specified
-    for DNSKEY signatures from other signatures.
-  * New '-L' option to dnssec-keygen, dnssec-settime, and
-    dnssec-keyfromlabel sets the default TTL for the key.
-  * dnssec-dsfromkey now supports reading from standard input, to make it
-    easier to convert DNSKEY to DS.
-  * RFC 1918 reverse zones have been added to the empty-zones table per
-    RFC 6303.
-  * Dynamic updates can now optionally set the zone's SOA serial number to
-    the current UNIX time.
-  * DLZ modules can now retrieve the source IP address of the querying
-    client.
-  * 'request-ixfr' option can now be set at the per-zone level.
-  * 'dig +rrcomments' turns on comments about DNSKEY records, indicating
-    their key ID, algorithm and function
-  * Simplified nsupdate syntax and added readline support
-
-BIND 9.8.0
-
-BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
-releases. New features include:
-
-  * Built-in trust anchor for the root zone, which can be switched on via
-    "dnssec-validation auto;"
-  * Support for DNS64.
-  * Support for response policy zones (RPZ).
-  * Support for writable DLZ zones.
-  * Improved ease of configuration of GSS/TSIG for interoperability with
-    Active Directory
-  * Support for GOST signing algorithm for DNSSEC.
-  * Removed RTT Banding from server selection algorithm.
-  * New "static-stub" zone type.
-  * Allow configuration of resolver timeouts via "resolver-query-timeout"
-    option.
-  * The DLZ "dlopen" driver is now built by default.
-  * Added a new include file with function typedefs for the DLZ "dlopen"
-    driver.
-  * Made "--with-gssapi" default.
-  * More verbose error reporting from DLZ LDAP.
-
-BIND 9.7.0
-
-BIND 9.7.0 includes a number of changes from BIND 9.6 and earlier
-releases. Most are intended to simplify DNSSEC configuration. New features
-include:
-
-  * Fully automatic signing of zones by "named".
-  * Simplified configuration of DNSSEC Lookaside Validation (DLV).
-  * Simplified configuration of Dynamic DNS, using the "ddns-confgen"
-    command line tool or the "local" update-policy option. (As a side
-    effect, this also makes it easier to configure automatic zone
-    re-signing.)
-  * New named option "attach-cache" that allows multiple views to share a
-    single cache.
-  * DNS rebinding attack prevention.
-  * New default values for dnssec-keygen parameters.
-  * Support for RFC 5011 automated trust anchor maintenance
-  * Smart signing: simplified tools for zone signing and key maintenance.
-  * The "statistics-channels" option is now available on Windows.
-  * A new DNSSEC-aware libdns API for use by non-BIND9 applications
-  * On some platforms, named and other binaries can now print out a stack
-    backtrace on assertion failure, to aid in debugging.
-  * A "tools only" installation mode on Windows, which only installs dig,
-    host, nslookup and nsupdate.
-  * Improved PKCS#11 support, including Keyper support and explicit
-    OpenSSL engine selection.
+Summary of functional enhancements from prior major releases of BIND 9:
 
 BIND 9.6.0
 
-  * Full NSEC3 support
-  * Automatic zone re-signing
-  * New update-policy methods tcp-self and 6to4-self
-  * The BIND 8 resolver library, libbind, has been removed from the BIND 9
-    distribution and is now available as a separate download.
-  * Change the default pid file location from /var/run to /var/run/
-    {named,lwresd} for improved chroot/setuid support.
+        Full NSEC3 support
+
+        Automatic zone re-signing
+
+	New update-policy methods tcp-self and 6to4-self
+
+        The BIND 8 resolver library, libbind, has been removed from the
+        BIND 9 distribution and is now available as a separate download.
+
+	Change the default pid file location from /var/run to
+	/var/run/{named,lwresd} for improved chroot/setuid support.
 
 BIND 9.5.0
 
-  * GSS-TSIG support (RFC 3645).
-  * DHCID support.
-  * Experimental http server and statistics support for named via xml.
-  * More detailed statistics counters including those supported in BIND 8.
-  * Faster ACL processing.
-  * Use Doxygen to generate internal documentation.
-  * Efficient LRU cache-cleaning mechanism.
-  * NSID support.
+	GSS-TSIG support (RFC 3645).
+
+	DHCID support.
+
+	Experimental http server and statistics support for named via xml.
+
+	More detailed statistics counters including those supported in BIND 8.
+
+	Faster ACL processing.
+
+	Use Doxygen to generate internal documentation.
+
+        Efficient LRU cache-cleaning mechanism.
+
+        NSID support.
 
 BIND 9.4.0
 
-  * Implemented "additional section caching (or acache)", an internal
-    cache framework for additional section content to improve response
-    performance. Several configuration options were provided to control
-    the behavior.
-  * New notify type 'master-only'. Enable notify for master zones only.
-  * Accept 'notify-source' style syntax for query-source.
-  * rndc now allows addresses to be set in the server clauses.
-  * New option "allow-query-cache". This lets "allow-query" be used to
-    specify the default zone access level rather than having to have every
-    zone override the global value. "allow-query-cache" can be set at both
-    the options and view levels. If "allow-query-cache" is not set then
-    "allow-recursion" is used if set, otherwise "allow-query" is used if
-    set unless "recursion no;" is set in which case "none;" is used,
-    otherwise the default (localhost; localnets;) is used.
-  * rndc: the source address can now be specified.
-  * ixfr-from-differences now takes master and slave in addition to yes
-    and no at the options and view levels.
-  * Allow the journal's name to be changed via named.conf.
-  * 'rndc notify zone [class [view]]' resend the NOTIFY messages for the
-    specified zone.
-  * 'dig +trace' now randomly selects the next servers to try. Report if
-    there is a bad delegation.
-  * Improve check-names error messages.
-  * Make public the function to read a key file, dst_key_read_public().
-  * dig now returns the byte count for axfr/ixfr.
-  * allow-update is now settable at the options / view level.
-  * named-checkconf now checks the logging configuration.
-  * host now can turn on memory debugging flags with '-m'.
-  * Don't send notify messages to self.
-  * Perform sanity checks on NS records which refer to 'in zone' names.
-  * New zone option "notify-delay". Specify a minimum delay between sets
-    of NOTIFY messages.
-  * Extend adjusting TTL warning messages.
-  * Named and named-checkzone can now both check for non-terminal wildcard
-    records.
-  * "rndc freeze/thaw" now freezes/thaws all zones.
-  * named-checkconf now check acls to verify that they only refer to
-    existing acls.
-  * The server syntax has been extended to support a range of servers.
-  * Report differences between hints and real NS rrset and associated
-    address records.
-  * Preserve the case of domain names in rdata during zone transfers.
-  * Restructured the data locking framework using architecture dependent
-    atomic operations (when available), improving response performance on
-    multi-processor machines significantly. x86, x86_64, alpha, powerpc,
-    and mips are currently supported.
-  * UNIX domain controls are now supported.
-  * Add support for additional zone file formats for improving loading
-    performance. The masterfile-format option in named.conf can be used to
-    specify a non-default format. A separate command named-compilezone was
-    provided to generate zone files in the new format. Additionally, the
-    -I and -O options for dnssec-signzone specify the input and output
-    formats.
-  * dnssec-signzone can now randomize signature end times (dnssec-signzone
-    -j jitter).
-  * Add support for CH A record.
-  * Add additional zone data constancy checks. named-checkzone has
-    extended checking of NS, MX and SRV record and the hosts they
-    reference. named has extended post zone load checks. New zone options:
-    check-mx and integrity-check.
-  * edns-udp-size can now be overridden on a per server basis.
-  * dig can now specify the EDNS version when making a query.
-  * Added framework for handling multiple EDNS versions.
-  * Additional memory debugging support to track size and mctx arguments.
-  * Detect duplicates of UDP queries we are recursing on and drop them.
-    New stats category "duplicates".
-  * "USE INTERNAL MALLOC" is now runtime selectable.
-  * The lame cache is now done on a basis as some servers only appear to
-    be lame for certain query types.
-  * Limit the number of recursive clients that can be waiting for a single
-    query () to resolve. New options clients-per-query and
-    max-clients-per-query.
-  * dig: report the number of extra bytes still left in the packet after
-    processing all the records.
-  * Support for IPSECKEY rdata type.
-  * Raise the UDP recieve buffer size to 32k if it is less than 32k.
-  * x86 and x86_64 now have seperate atomic locking implementations.
-  * named-checkconf now validates update-policy entries.
-  * Attempt to make the amount of work performed in a iteration self
-    tuning. The covers nodes clean from the cache per iteration, nodes
-    written to disk when rewriting a master file and nodes destroyed per
-    iteration when destroying a zone or a cache.
-  * ISC string copy API.
-  * Automatic empty zone creation for D.F.IP6.ARPA and friends. Note: RFC
-    1918 zones are not yet covered by this but are likely to be in a
-    future release.
-  * New options: empty-server, empty-contact, empty-zones-enable and
-    disable-empty-zone.
-  * dig now has a '-q queryname' and '+showsearch' options.
-  * host/nslookup now continue (default)/fail on SERVFAIL.
-  * dig now warns if 'RA' is not set in the answer when 'RD' was set in
-    the query. host/nslookup skip servers that fail to set 'RA' when 'RD'
-    is set unless a server is explicitly set.
-  * Integrate contibuted DLZ code into named.
-  * Integrate contibuted IDN code from JPNIC.
-  * libbind: corresponds to that from BIND 8.4.7.
+	Implemented "additional section caching (or acache)", an
+	internal cache framework for additional section content to
+	improve response performance.  Several configuration options
+	were provided to control the behavior.
+
+	New notify type 'master-only'.  Enable notify for master
+	zones only.
+
+	Accept 'notify-source' style syntax for query-source.
+
+	rndc now allows addresses to be set in the server clauses.
+
+	New option "allow-query-cache".  This lets "allow-query"
+	be used to specify the default zone access level rather
+	than having to have every zone override the global value.
+	"allow-query-cache" can be set at both the options and view
+	levels.  If "allow-query-cache" is not set then "allow-recursion"
+	is used if set, otherwise "allow-query" is used if set
+	unless "recursion no;" is set in which case "none;" is used,
+	otherwise the default (localhost; localnets;) is used.
+
+	rndc: the source address can now be specified.
+
+	ixfr-from-differences now takes master and slave in addition
+	to yes and no at the options and view levels.
+
+	Allow the journal's name to be changed via named.conf.
+
+	'rndc notify zone [class [view]]' resend the NOTIFY messages
+	for the specified zone.
+
+	'dig +trace' now randomly selects the next servers to try.
+	Report if there is a bad delegation.
+
+	Improve check-names error messages.
+
+	Make public the function to read a key file, dst_key_read_public().
+
+	dig now returns the byte count for axfr/ixfr.
+			
+	allow-update is now settable at the options / view level.
+
+	named-checkconf now checks the logging configuration.
+
+	host now can turn on memory debugging flags with '-m'.
+
+	Don't send notify messages to self.
+
+	Perform sanity checks on NS records which refer to 'in zone' names.
+
+	New zone option "notify-delay".  Specify a minimum delay
+	between sets of NOTIFY messages.
+
+	Extend adjusting TTL warning messages.
+
+	Named and named-checkzone can now both check for non-terminal
+	wildcard records.
+
+	"rndc freeze/thaw" now freezes/thaws all zones.
+
+	named-checkconf now check acls to verify that they only
+	refer to existing acls.
+
+	The server syntax has been extended to support a range of
+	servers.
+
+	Report differences between hints and real NS rrset and
+	associated address records.
+
+	Preserve the case of domain names in rdata during zone
+	transfers.
+
+	Restructured the data locking framework using architecture
+	dependent atomic operations (when available), improving
+	response performance on multi-processor machines significantly.
+	x86, x86_64, alpha, powerpc, and mips are currently supported.
+
+	UNIX domain controls are now supported.
+
+	Add support for additional zone file formats for improving
+	loading performance.  The masterfile-format option in
+	named.conf can be used to specify a non-default format.  A
+	separate command named-compilezone was provided to generate
+	zone files in the new format.  Additionally, the -I and -O
+	options for dnssec-signzone specify the input and output
+	formats.
+
+	dnssec-signzone can now randomize signature end times
+	(dnssec-signzone -j jitter).
+
+	Add support for CH A record.
+
+	Add additional zone data constancy checks.  named-checkzone
+	has extended checking of NS, MX and SRV record and the hosts
+	they reference.  named has extended post zone load checks.
+	New zone options: check-mx and integrity-check.
+
+
+	edns-udp-size can now be overridden on a per server basis.
+
+	dig can now specify the EDNS version when making a query.
+
+	Added framework for handling multiple EDNS versions.
+
+	Additional memory debugging support to track size and mctx
+	arguments.
+
+	Detect duplicates of UDP queries we are recursing on and
+	drop them.  New stats category "duplicates".
+
+	"USE INTERNAL MALLOC" is now runtime selectable.
+
+	The lame cache is now done on a <qname,qclass,qtype> basis
+	as some servers only appear to be lame for certain query
+	types.
+
+	Limit the number of recursive clients that can be waiting
+	for a single query (<qname,qtype,qclass>) to resolve.  New
+	options clients-per-query and max-clients-per-query.
+
+	dig: report the number of extra bytes still left in the
+	packet after processing all the records.
+
+	Support for IPSECKEY rdata type.
+
+	Raise the UDP recieve buffer size to 32k if it is less than 32k.
+
+	x86 and x86_64 now have seperate atomic locking implementations.
+
+	named-checkconf now validates update-policy entries.
+
+	Attempt to make the amount of work performed in a iteration
+	self tuning.  The covers nodes clean from the cache per
+	iteration, nodes written to disk when rewriting a master
+	file and nodes destroyed per iteration when destroying a
+	zone or a cache.
+
+	ISC string copy API.
+
+	Automatic empty zone creation for D.F.IP6.ARPA and friends.
+	Note: RFC 1918 zones are not yet covered by this but are
+	likely to be in a future release.
+
+	New options: empty-server, empty-contact, empty-zones-enable
+	and disable-empty-zone.
+
+	dig now has a '-q queryname' and '+showsearch' options.
+
+	host/nslookup now continue (default)/fail on SERVFAIL.
+
+	dig now warns if 'RA' is not set in the answer when 'RD'
+	was set in the query.  host/nslookup skip servers that fail
+	to set 'RA' when 'RD' is set unless a server is explicitly
+	set.
+
+	Integrate contibuted DLZ code into named.
+
+	Integrate contibuted IDN code from JPNIC.
+
+	libbind: corresponds to that from BIND 8.4.7.
 
 BIND 9.3.0
 
-  * DNSSEC is now DS based (RFC 3658).
-  * DNSSEC lookaside validation.
-  * check-names is now implemented.
-  * rrset-order is more complete.
-  * IPv4/IPv6 transition support, dual-stack-servers.
-  * IXFR deltas can now be generated when loading master files,
-    ixfr-from-differences.
-  * It is now possible to specify the size of a journal, max-journal-size.
-  * It is now possible to define a named set of master servers to be used
-    in masters clause, masters.
-  * The advertised EDNS UDP size can now be set, edns-udp-size.
-  * allow-v6-synthesis has been obsoleted.
-  * Zones containing MD and MF will now be rejected.
-  * dig, nslookup name. now report "Not Implemented" as NOTIMP rather than
-    NOTIMPL. This will have impact on scripts that are looking for
-    NOTIMPL.
-  * libbind: corresponds to that from BIND 8.4.5.
+	DNSSEC is now DS based (RFC 3658).
+	See also RFC 3845, doc/draft/draft-ietf-dnsext-dnssec-*.
+
+	DNSSEC lookaside validation.
+
+	check-names is now implemented.
+	rrset-order in more complete.
+
+	IPv4/IPv6 transition support, dual-stack-servers.
+
+	IXFR deltas can now be generated when loading master files,
+	ixfr-from-differences.
+
+	It is now possible to specify the size of a journal, max-journal-size.
+
+	It is now possible to define a named set of master servers to be
+	used in masters clause, masters.
+
+	The advertised EDNS UDP size can now be set, edns-udp-size.
+
+	allow-v6-synthesis has been obsoleted.
+
+	NOTE:
+	* Zones containing MD and MF will now be rejected.
+	* dig, nslookup name. now report "Not Implemented" as
+	  NOTIMP rather than NOTIMPL.  This will have impact on scripts
+	  that are looking for NOTIMPL.
+
+	libbind: corresponds to that from BIND 8.4.5.
 
 BIND 9.2.0
 
-  * The size of the cache can now be limited using the "max-cache-size"
-    option.
-  * The server can now automatically convert RFC1886-style recursive
-    lookup requests into RFC2874-style lookups, when enabled using the new
-    option "allow-v6-synthesis". This allows stub resolvers that support
-    AAAA records but not A6 record chains or binary labels to perform
-    lookups in domains that make use of these IPv6 DNS features.
-  * Performance has been improved.
-  * The man pages now use the more portable "man" macros rather than the
-    "mandoc" macros, and are installed by "make install".
-  * The named.conf parser has been completely rewritten. It now supports
-    "include" directives in more places such as inside "view" statements,
-    and it no longer has any reserved words.
-  * The "rndc status" command is now implemented.
-  * rndc can now be configured automatically.
-  * A BIND 8 compatible stub resolver library is now included in lib/bind.
-  * OpenSSL has been removed from the distribution. This means that to use
-    DNSSEC, OpenSSL must be installed and the --with-openssl option must
-    be supplied to configure. This does not apply to the use of TSIG,
-    which does not require OpenSSL.
-  * The source distribution now builds on Windows. See win32utils/
-    readme1.txt and win32utils/win32-build.txt for details.
-  * This distribution also includes a new lightweight stub resolver
-    library and associated resolver daemon that fully support forward and
-    reverse lookups of both IPv4 and IPv6 addresses. This library is
-    considered experimental and is not a complete replacement for the BIND
-    8 resolver library. Applications that use the BIND 8 res_* functions
-    to perform DNS lookups or dynamic updates still need to be linked
-    against the BIND 8 libraries. For DNS lookups, they can also use the
-    new "getrrsetbyname()" API.
-  * BIND 9.2 is capable of acting as an authoritative server for DNSSEC
-    secured zones. This functionality is believed to be stable and
-    complete except for lacking support for verifications involving
-    wildcard records in secure zones.
-  * When acting as a caching server, BIND 9.2 can be configured to perform
-    DNSSEC secure resolution on behalf of its clients. This part of the
-    DNSSEC implementation is still considered experimental. For detailed
-    information about the state of the DNSSEC implementation, see the file
-    doc/misc/dnssec.
+	The size of the cache can now be limited using the
+        "max-cache-size" option.
+
+	The server can now automatically convert RFC1886-style recursive
+	lookup requests into RFC2874-style lookups, when enabled using the
+	new option "allow-v6-synthesis".  This allows stub resolvers that
+	support AAAA records but not A6 record chains or binary labels to
+	perform lookups in domains that make use of these IPv6 DNS
+	features.
+
+	Performance has been improved.
+
+	The man pages now use the more portable "man" macros rather than
+	the "mandoc" macros, and are installed by "make install".
+
+	The named.conf parser has been completely rewritten.  It now
+	supports "include" directives in more places such as inside "view"
+	statements, and it no longer has any reserved words.
+
+	The "rndc status" command is now implemented.
+
+	rndc can now be configured automatically.
+
+	A BIND 8 compatible stub resolver library is now included in
+	lib/bind.
+
+	OpenSSL has been removed from the distribution.  This means that to
+	use DNSSEC, OpenSSL must be installed and the --with-openssl option
+	must be supplied to configure.  This does not apply to the use of
+	TSIG, which does not require OpenSSL.
+
+	The source distribution now builds on Windows.  See
+	win32utils/readme1.txt and win32utils/win32-build.txt for details.
+
+	This distribution also includes a new lightweight stub
+	resolver library and associated resolver daemon that fully
+	support forward and reverse lookups of both IPv4 and IPv6
+	addresses.  This library is considered experimental and
+	is not a complete replacement for the BIND 8 resolver library.
+	Applications that use the BIND 8 res_* functions to perform
+	DNS lookups or dynamic updates still need to be linked against
+	the BIND 8 libraries.  For DNS lookups, they can also use the
+	new "getrrsetbyname()" API.
+
+	BIND 9.2 is capable of acting as an authoritative server
+	for DNSSEC secured zones.  This functionality is believed to
+	be stable and complete except for lacking support for
+	verifications involving wildcard records in secure zones.
+
+	When acting as a caching server, BIND 9.2 can be configured
+	to perform DNSSEC secure resolution on behalf of its clients.
+	This part of the DNSSEC implementation is still considered
+	experimental.  For detailed information about the state of the
+	DNSSEC implementation, see the file doc/misc/dnssec.
+
+	There are a few known bugs:
+
+	    On some systems, IPv6 and IPv4 sockets interact in
+	    unexpected ways.  For details, see doc/misc/ipv6.
+	    To reduce the impact of these problems, the server
+	    no longer listens for requests on IPv6 addresses
+	    by default.  If you need to accept DNS queries over
+	    IPv6, you must specify "listen-on-v6 { any; };"
+	    in the named.conf options statement.
+
+	    FreeBSD prior to 4.2 (and 4.2 if running as non-root)
+	    and OpenBSD prior to 2.8 log messages like
+	    "fcntl(8, F_SETFL, 4): Inappropriate ioctl for device".
+	    This is due to a bug in "/dev/random" and impacts the
+	    server's DNSSEC support.
+
+	    OS X 10.1.4 (Darwin 5.4), OS X 10.1.5 (Darwin 5.5) and
+	    OS X 10.2 (Darwin 6.0) reports errors like
+	    "fcntl(3, F_SETFL, 4): Operation not supported by device".
+	    This is due to a bug in "/dev/random" and impacts the
+	    server's DNSSEC support.
+
+	    --with-libtool does not work on AIX.
+
+	A bug in some versions of the Microsoft DNS server can cause zone
+        transfers from a BIND 9 server to a W2K server to fail.  For details,
+	see the "Zone Transfers" section in doc/misc/migration.

HISTORY.md

@@ -1,291 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-### Functional enhancements from prior major releases of BIND 9
-
-#### BIND 9.9.0
-
-BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
-releases.  New features include:
-
-- Inline signing, allowing automatic DNSSEC signing of
-  master zones without modification of the zonefile, or
-  "bump in the wire" signing in slaves.
-- NXDOMAIN redirection.
-- New 'rndc flushtree' command clears all data under a given
-  name from the DNS cache.
-- New 'rndc sync' command dumps pending changes in a dynamic
-  zone to disk without a freeze/thaw cycle.
-- New 'rndc signing' command displays or clears signing status
-  records in 'auto-dnssec' zones.
-- NSEC3 parameters for 'auto-dnssec' zones can now be set prior
-  to signing, eliminating the need to initially sign with NSEC.
-- Startup time improvements on large authoritative servers.
-- Slave zones are now saved in raw format by default.
-- Several improvements to response policy zones (RPZ).
-- Improved hardware scalability by using multiple threads
-  to listen for queries and using finer-grained client locking
-- The 'also-notify' option now takes the same syntax as
-  'masters', so it can used named masterlists and TSIG keys.
-- 'dnssec-signzone -D' writes an output file containing only DNSSEC
-  data, which can be included by the primary zone file.
-- 'dnssec-signzone -R' forces removal of signatures that are
-  not expired but were created by a key which no longer exists.
-- 'dnssec-signzone -X' allows a separate expiration date to
-  be specified for DNSKEY signatures from other signatures.
-- New '-L' option to dnssec-keygen, dnssec-settime, and
-  dnssec-keyfromlabel sets the default TTL for the key.
-- dnssec-dsfromkey now supports reading from standard input,
-  to make it easier to convert DNSKEY to DS.
-- RFC 1918 reverse zones have been added to the empty-zones
-  table per RFC 6303.
-- Dynamic updates can now optionally set the zone's SOA serial
-  number to the current UNIX time.
-- DLZ modules can now retrieve the source IP address of
-  the querying client.
-- 'request-ixfr' option can now be set at the per-zone level.
-- 'dig +rrcomments' turns on comments about DNSKEY records,
-  indicating their key ID, algorithm and function
-- Simplified nsupdate syntax and added readline support
-
-#### BIND 9.8.0
-
-BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
-releases.  New features include:
-
-- Built-in trust anchor for the root zone, which can be
-  switched on via "dnssec-validation auto;"
-- Support for DNS64.
-- Support for response policy zones (RPZ).
-- Support for writable DLZ zones.
-- Improved ease of configuration of GSS/TSIG for
-  interoperability with Active Directory
-- Support for GOST signing algorithm for DNSSEC.
-- Removed RTT Banding from server selection algorithm.
-- New "static-stub" zone type.
-- Allow configuration of resolver timeouts via
-  "resolver-query-timeout" option.
-- The DLZ "dlopen" driver is now built by default.
-- Added a new include file with function typedefs
-  for the DLZ "dlopen" driver.
-- Made "--with-gssapi" default.
-- More verbose error reporting from DLZ LDAP.
-
-#### BIND 9.7.0
-
-BIND 9.7.0 includes a number of changes from BIND 9.6 and earlier
-releases.  Most are intended to simplify DNSSEC configuration.
-New features include:
-
-- Fully automatic signing of zones by "named".
-- Simplified configuration of DNSSEC Lookaside Validation (DLV).
-- Simplified configuration of Dynamic DNS, using the "ddns-confgen"
-  command line tool or the "local" update-policy option.  (As a side
-  effect, this also makes it easier to configure automatic zone
-  re-signing.)
-- New named option "attach-cache" that allows multiple views to
-  share a single cache.
-- DNS rebinding attack prevention.
-- New default values for dnssec-keygen parameters.
-- Support for RFC 5011 automated trust anchor maintenance
-- Smart signing: simplified tools for zone signing and key
-  maintenance.
-- The "statistics-channels" option is now available on Windows.
-- A new DNSSEC-aware libdns API for use by non-BIND9 applications
-- On some platforms, named and other binaries can now print out
-  a stack backtrace on assertion failure, to aid in debugging.
-- A "tools only" installation mode on Windows, which only installs
-  dig, host, nslookup and nsupdate.
-- Improved PKCS#11 support, including Keyper support and explicit
-  OpenSSL engine selection.
-
-#### BIND 9.6.0
-
-- Full NSEC3 support
-- Automatic zone re-signing
-- New update-policy methods tcp-self and 6to4-self
-- The BIND 8 resolver library, libbind, has been removed from the BIND 9
-  distribution and is now available as a separate download.
-- Change the default pid file location from /var/run to
-  /var/run/{named,lwresd} for improved chroot/setuid support.
-
-#### BIND 9.5.0
-
-- GSS-TSIG support (RFC 3645).
-- DHCID support.
-- Experimental http server and statistics support for named via xml.
-- More detailed statistics counters including those supported in BIND 8.
-- Faster ACL processing.
-- Use Doxygen to generate internal documentation.
-- Efficient LRU cache-cleaning mechanism.
-- NSID support.
-
-BIND 9.4.0
-
-- Implemented "additional section caching (or acache)", an internal cache
-  framework for additional section content to improve response performance.
-  Several configuration options were provided to control the behavior.
-- New notify type 'master-only'.  Enable notify for master zones only.
-- Accept 'notify-source' style syntax for query-source.
-- rndc now allows addresses to be set in the server clauses.
-- New option "allow-query-cache".  This lets "allow-query" be used to
-  specify the default zone access level rather than having to have every
-  zone override the global value.  "allow-query-cache" can be set at both
-  the options and view levels.  If "allow-query-cache" is not set then
-  "allow-recursion" is used if set, otherwise "allow-query" is used if set
-  unless "recursion no;" is set in which case "none;" is used, otherwise
-  the default (localhost; localnets;) is used.
-- rndc: the source address can now be specified.
-- ixfr-from-differences now takes master and slave in addition to yes and
-  no at the options and view levels.
-- Allow the journal's name to be changed via named.conf.
-- 'rndc notify zone [class [view]]' resend the NOTIFY messages for the
-  specified zone.
-- 'dig +trace' now randomly selects the next servers to try.  Report if
-  there is a bad delegation.
-- Improve check-names error messages.
-- Make public the function to read a key file, dst_key_read_public().
-- dig now returns the byte count for axfr/ixfr.
-- allow-update is now settable at the options / view level.
-- named-checkconf now checks the logging configuration.
-- host now can turn on memory debugging flags with '-m'.
-- Don't send notify messages to self.
-- Perform sanity checks on NS records which refer to 'in zone' names.
-- New zone option "notify-delay".  Specify a minimum delay between sets of
-  NOTIFY messages.
-- Extend adjusting TTL warning messages.
-- Named and named-checkzone can now both check for non-terminal wildcard
-  records.
-- "rndc freeze/thaw" now freezes/thaws all zones.
-- named-checkconf now check acls to verify that they only refer to existing
-  acls.
-- The server syntax has been extended to support a range of servers.
-- Report differences between hints and real NS rrset and associated address
-  records.
-- Preserve the case of domain names in rdata during zone transfers.
-- Restructured the data locking framework using architecture dependent
-  atomic operations (when available), improving response performance on
-  multi-processor machines significantly.  x86, x86_64, alpha, powerpc, and
-  mips are currently supported.
-- UNIX domain controls are now supported.
-- Add support for additional zone file formats for improving loading
-  performance.  The masterfile-format option in named.conf can be used to
-  specify a non-default format.  A separate command named-compilezone was
-  provided to generate zone files in the new format.  Additionally, the -I
-  and -O options for dnssec-signzone specify the input and output formats.
-- dnssec-signzone can now randomize signature end times (dnssec-signzone -j
-  jitter).
-- Add support for CH A record.
-- Add additional zone data constancy checks.  named-checkzone has extended
-  checking of NS, MX and SRV record and the hosts they reference.  named
-  has extended post zone load checks.  New zone options: check-mx and
-  integrity-check.
-- edns-udp-size can now be overridden on a per server basis.
-- dig can now specify the EDNS version when making a query.
-- Added framework for handling multiple EDNS versions.
-- Additional memory debugging support to track size and mctx arguments.
-- Detect duplicates of UDP queries we are recursing on and drop them.  New
-  stats category "duplicates".
-- "USE INTERNAL MALLOC" is now runtime selectable.
-- The lame cache is now done on a <qname,qclass,qtype> basis as some
-  servers only appear to be lame for certain query types.
-- Limit the number of recursive clients that can be waiting for a single
-  query (<qname,qtype,qclass>) to resolve.  New options clients-per-query
-  and max-clients-per-query.
-- dig: report the number of extra bytes still left in the packet after
-  processing all the records.
-- Support for IPSECKEY rdata type.
-- Raise the UDP recieve buffer size to 32k if it is less than 32k.
-- x86 and x86_64 now have seperate atomic locking implementations.
-- named-checkconf now validates update-policy entries.
-- Attempt to make the amount of work performed in a iteration self tuning.
-  The covers nodes clean from the cache per iteration, nodes written to
-  disk when rewriting a master file and nodes destroyed per iteration when
-  destroying a zone or a cache.
-- ISC string copy API.
-- Automatic empty zone creation for D.F.IP6.ARPA and friends.  Note: RFC
-  1918 zones are not yet covered by this but are likely to be in a future
-  release.
-- New options: empty-server, empty-contact, empty-zones-enable and
-  disable-empty-zone.
-- dig now has a '-q queryname' and '+showsearch' options.
-- host/nslookup now continue (default)/fail on SERVFAIL.
-- dig now warns if 'RA' is not set in the answer when 'RD' was set in the
-  query.  host/nslookup skip servers that fail to set 'RA' when 'RD' is set
-  unless a server is explicitly set.
-- Integrate contibuted DLZ code into named.
-- Integrate contibuted IDN code from JPNIC.
-- libbind: corresponds to that from BIND 8.4.7.
-
-#### BIND 9.3.0
-
-- DNSSEC is now DS based (RFC 3658).
-- DNSSEC lookaside validation.
-- check-names is now implemented.
-- rrset-order is more complete.
-- IPv4/IPv6 transition support, dual-stack-servers.
-- IXFR deltas can now be generated when loading master files,
-  ixfr-from-differences.
-- It is now possible to specify the size of a journal, max-journal-size.
-- It is now possible to define a named set of master servers to be used in
-  masters clause, masters.
-- The advertised EDNS UDP size can now be set, edns-udp-size.
-- allow-v6-synthesis has been obsoleted.
-- Zones containing MD and MF will now be rejected.
-- dig, nslookup name. now report "Not Implemented" as NOTIMP rather than
-  NOTIMPL.  This will have impact on scripts that are looking for NOTIMPL.
-- libbind: corresponds to that from BIND 8.4.5.
-
-#### BIND 9.2.0
-
-- The size of the cache can now be limited using the "max-cache-size"
-  option.
-- The server can now automatically convert RFC1886-style recursive lookup
-  requests into RFC2874-style lookups, when enabled using the new option
-  "allow-v6-synthesis".  This allows stub resolvers that support AAAA
-  records but not A6 record chains or binary labels to perform lookups in
-  domains that make use of these IPv6 DNS features.
-- Performance has been improved.
-- The man pages now use the more portable "man" macros rather than the
-  "mandoc" macros, and are installed by "make install".
-- The named.conf parser has been completely rewritten.  It now supports
-  "include" directives in more places such as inside "view" statements, and
-  it no longer has any reserved words.
-- The "rndc status" command is now implemented.
-- rndc can now be configured automatically.
-- A BIND 8 compatible stub resolver library is now included in lib/bind.
-- OpenSSL has been removed from the distribution.  This means that to use
-  DNSSEC, OpenSSL must be installed and the --with-openssl option must be
-  supplied to configure.  This does not apply to the use of TSIG, which
-  does not require OpenSSL.
-- The source distribution now builds on Windows.  See
-  win32utils/readme1.txt and win32utils/win32-build.txt for details.
-- This distribution also includes a new lightweight stub resolver library
-  and associated resolver daemon that fully support forward and reverse
-  lookups of both IPv4 and IPv6 addresses.  This library is considered
-  experimental and is not a complete replacement for the BIND 8 resolver
-  library.  Applications that use the BIND 8 `res_*` functions to perform
-  DNS lookups or dynamic updates still need to be linked against the BIND 8
-  libraries.  For DNS lookups, they can also use the new "getrrsetbyname()"
-  API.
-- BIND 9.2 is capable of acting as an authoritative server for DNSSEC
-  secured zones.  This functionality is believed to be stable and complete
-  except for lacking support for verifications involving wildcard records
-  in secure zones.
-- When acting as a caching server, BIND 9.2 can be configured to perform
-  DNSSEC secure resolution on behalf of its clients.  This part of the
-  DNSSEC implementation is still considered experimental.  For detailed
-  information about the state of the DNSSEC implementation, see the file
-  doc/misc/dnssec.

Kyuafile

@@ -1,4 +0,0 @@
-syntax(2)
-test_suite('bind9')
-
-include('lib/Kyuafile')

Makefile.in

@@ -1,4 +1,5 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004-2009, 2011  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 1998-2002  Internet Software Consortium.
 #
 # Permission to use, copy, modify, and/or distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
@@ -12,31 +13,25 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 
+# $Id: Makefile.in,v 1.58.250.4 2011/09/06 04:06:11 marka Exp $
+
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
-top_builddir =  @top_builddir@
 
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
-SUBDIRS =	make unit lib bin doc
+SUBDIRS =	make unit lib bin doc @LIBEXPORT@
 TARGETS =
-PREREQS =	bind.keys.h
 
 MANPAGES =	isc-config.sh.1
 
 HTMLPAGES =	isc-config.sh.html
 
-MANOBJS =	README HISTORY OPTIONS ${MANPAGES} ${HTMLPAGES}
+MANOBJS =	${MANPAGES} ${HTMLPAGES}
 
 @BIND9_MAKE_RULES@
 
-newrr:
-	cd lib/dns; ${MAKE} newrr
-
-bind.keys.h: ${top_srcdir}/bind.keys ${srcdir}/util/bindkeys.pl
-	${PERL} ${srcdir}/util/bindkeys.pl < ${top_srcdir}/bind.keys > $@
-
 distclean::
 	rm -f config.cache config.h config.log config.status TAGS
 	rm -f libtool isc-config.sh configure.lineno
@@ -46,7 +41,6 @@ distclean::
 # to make it.
 maintainer-clean::
 	rm -f configure
-	rm -f bind.keys.h
 
 docclean manclean maintainer-clean::
 	rm -f ${MANOBJS}
@@ -60,66 +54,25 @@ installdirs:
 
 install:: isc-config.sh installdirs
 	${INSTALL_SCRIPT} isc-config.sh ${DESTDIR}${bindir}
-	rm -f ${DESTDIR}${bindir}/bind9-config
-	@LN@ ${DESTDIR}${bindir}/isc-config.sh ${DESTDIR}${bindir}/bind9-config
 	${INSTALL_DATA} ${top_srcdir}/isc-config.sh.1 ${DESTDIR}${mandir}/man1
-	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
-	@LN@ ${DESTDIR}${mandir}/man1/isc-config.sh.1 ${DESTDIR}${mandir}/man1/bind9-config.1
 	${INSTALL_DATA} ${top_srcdir}/bind.keys ${DESTDIR}${sysconfdir}
 
-uninstall::
-	rm -f ${DESTDIR}${sysconfdir}/bind.keys
-	rm -f ${DESTDIR}${mandir}/man1/bind9-config.1
-	rm -f ${DESTDIR}${mandir}/man1/isc-config.sh.1
-	rm -f ${DESTDIR}${bindir}/bind9-config
-	rm -f ${DESTDIR}${bindir}/isc-config.sh
-
 tags:
 	rm -f TAGS
 	find lib bin -name "*.[ch]" -print | @ETAGS@ -
 
-test check:
-	@if test -n "`${PERL} ${top_srcdir}/bin/tests/system/testsock.pl 2>&- || echo fail`"; then \
-	echo I: NOTE: The tests were not run because they require that; \
-	echo I:	the IP addresses 10.53.0.1 through 10.53.0.8 are configured; \
-	echo I:	as alias addresses on the loopback interface.  Please run; \
-	echo I:	\'bin/tests/system/ifconfig.sh up\' as root to configure; \
-	echo I:	them, then rerun the tests. Run make force-test to run the; \
-	echo I:	tests anyway.; \
-	exit 1; \
-	fi
-	${MAKE} test-force
+check: test
 
-force-test: test-force
-
-test-force:
+test:
 	status=0; \
 	(cd bin/tests && ${MAKE} ${MAKEDEFS} test) || status=1; \
-	(test -f ${top_builddir}/unit/unittest.sh && \
-		$(SHELL) ${top_builddir}/unit/unittest.sh) || status=1; \
+	(test -f unit/unittest.sh && $(SHELL) unit/unittest.sh) || status=1; \
 	exit $$status
 
-README: README.md
-	${PANDOC} --email-obfuscation=none -s -t html README.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-HISTORY: HISTORY.md
-	${PANDOC} --email-obfuscation=none -s -t html HISTORY.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-OPTIONS: OPTIONS.md
-	${PANDOC} --email-obfuscation=none -s -t html OPTIONS.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-CONTRIBUTING: CONTRIBUTING.md
-	${PANDOC} --email-obfuscation=none -s -t html CONTRIBUTING.md | \
-		${W3M} -dump -cols 75 -O ascii -T text/html | \
-		sed -e '$${/^$$/d;}' > $@
-
-unit::
-	sh ${top_builddir}/unit/unittest.sh
+FAQ: FAQ.xml
+	${XSLTPROC} doc/xsl/isc-docbook-text.xsl FAQ.xml | \
+	LC_ALL=C ${W3M} -T text/html -dump -cols 72 >$@.tmp
+	mv $@.tmp $@
 
 clean::
+	rm -f FAQ.tmp

OPTIONS

@@ -1,29 +0,0 @@
-Setting the STD_CDEFINES environment variable before running configure can
-be used to enable certain compile-time options that are not explicitly
-defined in configure.
-
-Some of these settings are:
-
-Setting                   Description
-                          Don't ovewrite memory when allocating or freeing
--DISC_MEM_FILL=0          it; this improves performance but makes
-                          debugging more difficult.
-                          Don't track memory allocations by file and line
--DISC_MEM_TRACKLINES=0    number; this improves performance but makes
-                          debugging more difficult.
--DISC_FACILITY=LOG_LOCAL0 Change the default syslog facility for named
--DNS_CLIENT_DROPPORT=0    Disable dropping queries from particular
-                          well-known ports:
--DCHECK_SIBLING=0         Don't check sibling glue in named-checkzone
--DCHECK_LOCAL=0           Don't check out-of-zone addresses in
-                          named-checkzone
--DNS_RUN_PID_DIR=0        Create default PID files in ${localstatedir}/run
-                          rather than ${localstatedir}/run/{named,lwresd}/
-                          Enable DNSSEC signature chasing support in dig.
--DDIG_SIGCHASE=1          (Note: This feature is deprecated. Use delv
-                          instead.)
-                          Increase the maximum number of configurable
--DNS_RPZ_MAX_ZONES=64     response policy zones from 32 to 64; this is the
-                          highest possible setting
--DISC_HEAP_CHECK          Test heap consistency after every heap
-                          operation; used when debugging

OPTIONS.md

@@ -1,33 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-Setting the `STD_CDEFINES` environment variable before running `configure`
-can be used to enable certain compile-time options that are not explicitly
-defined in `configure`.
-
-Some of these settings are:
-
-|Setting                            |Description |
-|-----------------------------------|----------------------------------------|
-|`-DISC_MEM_FILL=0`|Don't ovewrite memory when allocating or freeing it; this improves performance but makes debugging more difficult.|
-|`-DISC_MEM_TRACKLINES=0`|Don't track memory allocations by file and line number; this improves performance but makes debugging more difficult.|
-|<nobr>`-DISC_FACILITY=LOG_LOCAL0`</nobr>|Change the default syslog facility for `named`|
-|`-DNS_CLIENT_DROPPORT=0`|Disable dropping queries from particular well-known ports:|
-|`-DCHECK_SIBLING=0`|Don't check sibling glue in `named-checkzone`|
-|`-DCHECK_LOCAL=0`|Don't check out-of-zone addresses in `named-checkzone`|
-|`-DNS_RUN_PID_DIR=0`|Create default PID files in `${localstatedir}/run` rather than `${localstatedir}/run/{named,lwresd}/`|
-|`-DDIG_SIGCHASE=1`|Enable DNSSEC signature chasing support in `dig`.  (Note: This feature is deprecated. Use `delv` instead.)|
-|`-DNS_RPZ_MAX_ZONES=64`|Increase the maximum number of configurable response policy zones from 32 to 64; this is the highest possible setting|
-|`-DISC_HEAP_CHECK`|Test heap consistency after every heap operation; used when debugging|

README

@@ -1,502 +1,407 @@
 BIND 9
 
-Contents
-
- 1. Introduction
- 2. Reporting bugs and getting help
- 3. Contributing to BIND
- 4. BIND 9.10 features
- 5. Building BIND
- 6. macOS
- 7. Compile-time options
- 8. Automated testing
- 9. Documentation
-10. Change log
-11. Acknowledgments
-
-Introduction
-
-BIND (Berkeley Internet Name Domain) is a complete, highly portable
-implementation of the DNS (Domain Name System) protocol.
-
-The BIND name server, named, is able to serve as an authoritative name
-server, recursive resolver, DNS forwarder, or all three simultaneously. It
-implements views for split-horizon DNS, automatic DNSSEC zone signing and
-key management, catalog zones to facilitate provisioning of zone data
-throughout a name server constellation, response policy zones (RPZ) to
-protect clients from malicious data, response rate limiting (RRL) and
-recursive query limits to reduce distributed denial of service attacks,
-and many other advanced DNS features. BIND also includes a suite of
-administrative tools, including the dig and delv DNS lookup tools,
-nsupdate for dynamic DNS zone updates, rndc for remote name server
-administration, and more.
-
-BIND 9 is a complete re-write of the BIND architecture that was used in
-versions 4 and 8. Internet Systems Consortium (https://www.isc.org), a 501
-(c)(3) public benefit corporation dedicated to providing software and
-services in support of the Internet infrastructure, developed BIND 9 and
-is responsible for its ongoing maintenance and improvement. BIND is open
-source software licenced under the terms of the ISC License for all
-versions up to and including BIND 9.10, and the Mozilla Public License
-version 2.0 for all subsequent verisons.
-
-For a summary of features introduced in past major releases of BIND, see
-the file HISTORY.
-
-For a detailed list of changes made throughout the history of BIND 9, see
-the file CHANGES. See below for details on the CHANGES file format.
-
-For up-to-date release notes and errata, see http://www.isc.org/software/
-bind9/releasenotes
-
-Reporting bugs and getting help
-
-To report non-security-sensitive bugs or request new features, you may
-open an Issue in the BIND 9 project on the ISC GitLab server at https://
-gitlab.isc.org/isc-projects/bind9.
-
-Please note that, unless you explicitly mark the newly created Issue as
-"confidential", it will be publicly readable. Please do not include any
-information in bug reports that you consider to be confidential unless the
-issue has been marked as such. In particular, if submitting the contents
-of your configuration file in a non-confidential Issue, it is advisable to
-obscure key secrets: this can be done automatically by using
-named-checkconf -px.
-
-If the bug you are reporting is a potential security issue, such as an
-assertion failure or other crash in named, please do NOT use GitLab to
-report it. Instead, please send mail to security-officer@isc.org.
-
-Professional support and training for BIND are available from ISC at
-https://www.isc.org/support.
-
-To join the BIND Users mailing list, or view the archives, visit https://
-lists.isc.org/mailman/listinfo/bind-users.
-
-If you're planning on making changes to the BIND 9 source code, you may
-also want to join the BIND Workers mailing list, at https://lists.isc.org/
-mailman/listinfo/bind-workers.
-
-Contributing to BIND
-
-ISC maintains a public git repository for BIND; details can be found at
-http://www.isc.org/git/.
-
-Information for BIND contributors can be found in the following files: -
-General information: doc/dev/contrib.md - BIND 9 code style: doc/dev/
-style.md - BIND architecture and developer guide: doc/dev/dev.md
-
-Patches for BIND may be submitted as Merge Requests in the ISC GitLab
-server at at https://gitlab.isc.org/isc-projects/bind9/merge_requests.
-
-By default, external contributors don't have ability to fork BIND in the
-GitLab server, but if you wish to contribute code to BIND, you may request
-permission to do so. Thereafter, you can create git branches and directly
-submit requests that they be reviewed and merged.
-
-If you prefer, you may also submit code by opening a GitLab Issue and
-including your patch as an attachment, preferably generated by git
-format-patch.
-
-BIND 9.10 features
-
-BIND 9.10.0 includes a number of changes from BIND 9.9 and earlier
-releases. New features include:
-
-  * DNS Response-rate limiting (DNS RRL), which blunts the impact of
-    reflection and amplification attacks, is always compiled in and no
-    longer requires a compile-time option to enable it.
-  * An experimental "Source Identity Token" (SIT) EDNS option is now
-    available. Similar to DNS Cookies as invented by Donald Eastlake 3rd,
-    these are designed to enable clients to detect off-path spoofed
-    responses, and to enable servers to detect spoofed-source queries.
-    Servers can be configured to send smaller responses to clients that
-    have not identified themselves using a SIT option, reducing the
-    effectiveness of amplification attacks. RRL processing has also been
-    updated; clients proven to be legitimate via SIT are not subject to
-    rate limiting. Use configure --enable-sit to enable this feature in
-    BIND.
-  * A new zone file format, map, stores zone data in a format that can be
-    mapped directly into memory, allowing significantly faster zone
-    loading.
-  * delv (domain entity lookup and validation) is a new tool with dig-like
-    semantics for looking up DNS data and performing internal DNSSEC
-    validation. This allows easy validation in environments where the
-    resolver may not be trustworthy, and assists with troubleshooting of
-    DNSSEC problems. (NOTE: In previous development releases of BIND 9.10,
-    this utility was called delve. The spelling has been changed to avoid
-    confusion with the delve utility included with the Xapian search
-    engine.)
-  * Improved EDNS(0) processing for better resolver performance and
-    reliability over slow or lossy connections.
-  * A new configure --with-tuning=large option tunes certain compiled-in
-    constants and default settings to values better suited to large
-    servers with abundant memory. This can improve performance on such
-    servers, but will consume more memory and may degrade performance on
-    smaller systems.
-  * Substantial improvement in response-policy zone (RPZ) performance. Up
-    to 32 response-policy zones can be configured with minimal performance
-    loss.
-  * To improve recursive resolver performance, cache records which are
-    still being requested by clients can now be automatically refreshed
-    from the authoritative server before they expire, reducing or
-    eliminating the time window in which no answer is available in the
-    cache.
-  * New rpz-client-ip triggers and drop policies allowing response
-    policies based on the IP address of the client.
-  * ACLs can now be specified based on geographic location using the
-    MaxMind GeoIP databases. Use configure --with-geoip to enable.
-  * Zone data can now be shared between views, allowing multiple views to
-    serve the same zones authoritatively without storing multiple copies
-    in memory.
-  * New XML schema (version 3) for the statistics channel includes many
-    new statistics and uses a flattened XML tree for faster parsing. The
-    older schema is now deprecated.
-  * A new stylesheet, based on the Google Charts API, displays XML
-    statistics in charts and graphs on javascript-enabled browsers.
-  * The statistics channel can now provide data in JSON format as well as
-    XML.
-  * New stats counters track TCP and UDP queries received per zone, and
-    EDNS options received in total.
-  * The internal and export versions of the BIND libraries (libisc,
-    libdns, etc) have been unified so that external library clients can
-    use the same libraries as BIND itself.
-  * A new compile-time option, configure --enable-native-pkcs11, allows
-    BIND 9 cryptography functions to use the PKCS#11 API natively, so that
-    BIND can drive a cryptographic hardware service module (HSM) directly
-    instead of using a modified OpenSSL as an intermediary. (Note: This
-    feature requires an HSM to have a full implementation of the PKCS#11
-    API; many current HSMs only have partial implementations. The new
-    pkcs11-tokens command can be used to check API completeness. Native
-    PKCS#11 is known to work with the Thales nShield HSM and with SoftHSM
-    version 2 from the Open DNSSEC project.)
-  * The new max-zone-ttl option enforces maximum TTLs for zones. This can
-    simplify the process of rolling DNSSEC keys by guaranteeing that
-    cached signatures will have expired within the specified amount of
-    time.
-  * dig +subnet sends an EDNS CLIENT-SUBNET option when querying.
-  * dig +expire sends an EDNS EXPIRE option when querying. When this
-    option is sent with an SOA query to a server that supports it, it will
-    report the expiry time of a slave zone.
-  * New dnssec-coverage tool to check DNSSEC key coverage for a zone and
-    report if a lapse in signing coverage has been inadvertently
-    scheduled.
-  * Signing algorithm flexibility and other improvements for the rndc
-    control channel.
-  * named-checkzone and named-compilezone can now read journal files,
-    allowing them to process dynamic zones.
-  * Multiple DLZ databases can now be configured. Individual zones can be
-    configured to be served from a specific DLZ database. DLZ databases
-    now serve zones of type master and redirect.
-  * rndc zonestatus reports information about a specified zone.
-  * named now listens on IPv6 as well as IPv4 interfaces by default.
-  * named now preserves the capitalization of names when responding to
-    queries: for instance, a query for "example.com" may be answered with
-    "example.COM" if the name was configured that way in the zone file.
-    Some clients have a bug causing them to depend on the older behavior,
-    in which the case of the answer always matched the case of the query,
-    rather than the case of the name configured in the DNS. Such clients
-    can now be specified in the new no-case-compress ACL; this will
-    restore the older behavior of named for those clients only.
-  * new dnssec-importkey command allows the use of offline DNSSEC keys
-    with automatic DNSKEY management.
-  * New named-rrchecker tool to verify the syntactic correctness of
-    individual resource records.
-  * When re-signing a zone, the new dnssec-signzone -Q option drops
-    signatures from keys that are still published but are no longer
-    active.
-  * named-checkconf -px will print the contents of configuration files
-    with the shared secrets obscured, making it easier to share
-    configuration (e.g. when submitting a bug report) without revealing
-    private information.
-  * rndc scan causes named to re-scan network interfaces for changes in
-    local addresses.
-  * On operating systems with support for routing sockets, network
-    interfaces are re-scanned automatically whenever they change.
-  * tsig-keygen is now available as an alternate command name to use for
-    ddns-confgen.
-
-BIND 9.10.1
-
-BIND 9.10.1 is a maintenance release, and addresses the security flaws
-described in CVE-2014-3214 and CVE-2014-3859.
-
-BIND 9.10.2
-
-BIND 9.10.2 is a maintenance release, and addresses the security flaws
-described in CVE-2014-8500, CVE-2014-8680 and CVE-2015-1349.
-
-BIND 9.10.3
-
-BIND 9.10.3 is a maintenance release, and addresses the security flaws
-described in CVE-2015-4620, CVE-2015-5477, CVE-2015-5722, and
-CVE-2015-5986.
-
-It also makes the following new features available:
-
-  * New "fetchlimit" quotas are now available for the use of recursive
-    resolvers that are are under high query load for domains whose
-    authoritative servers are nonresponsive or are experiencing a denial
-    of service attack.
-
-      + fetches-per-server limits the number of simultaneous queries that
-        can be sent to any single authoritative server. The configured
-        value is a starting point; it is automatically adjusted downward
-        if the server is partially or completely non-responsive. The
-        algorithm used to adjust the quota can be configured via the
-        fetch-quota-params option.
-      + fetches-per-zone limits the number of simultaneous queries that
-        can be sent for names within a single domain. (Note: Unlike
-        fetches-per-server, this value is not self-tuning.)
-      + New stats counters have been added to count queries spilled due to
-        these quotas.
-
-NOTE: These features are NOT built in by default; use configure
---enable-fetchlimit to enable them.
-
-  * dig now supports sending of arbitrary EDNS options by specifying them
-    on the command line.
-
-BIND 9.10.4
-
-BIND 9.10.4 is a maintenance release, and addresses the security flaws
-described in CVE-2015-8000, CVE-2015-8461, CVE-2015-8704, CVE-2015-8705,
-CVE-2016-1285, CVE-2016-1286, CVE-2016-2088, CVE-2016-2775 and
-CVE-2016-2776.
-
-BIND 9.10.5
-
-BIND 9.10.5 is a maintenance release, and addresses the security flaws
-disclosed in CVE-2016-2775, CVE-2016-2776, CVE-2016-6170, CVE-2016-8864,
-CVE-2016-9131, CVE-2016-9147, CVE-2016-9444, CVE-2017-3135, CVE-2017-3136,
-CVE-2017-3137, and CVE-2017-3138.
-
-BIND 9.10.6
-
-BIND 9.10.6 is a maintenance release, and addresses the security flaws
-disclosed in CVE-2017-3140 and CVE-2017-3141, CVE-2017-3142 and
-CVE-2017-3143.
-
-BIND 9.10.7
-
-BIND 9.10.7 is a maintenance release, and addresses the security flaw
-disclosed in CVE-2017-3145.
-
-BIND 9.10.8
-
-BIND 9.10.8 is a maintenance release, and addresses the security flaw
-disclosed in CVE-2018-5738.
-
-Building BIND
-
-BIND requires a UNIX or Linux system with an ANSI C compiler, basic POSIX
-support, and a 64-bit integer type. Successful builds have been observed
-on many versions of Linux and UNIX, including RedHat, Fedora, Debian,
-Ubuntu, SuSE, Slackware, FreeBSD, NetBSD, OpenBSD, Mac OS X, Solaris,
-HP-UX, AIX, SCO OpenServer, and OpenWRT.
-
-BIND is also available for Windows XP, 2003, 2008, and higher. See
-win32utils/readme1st.txt for details on building for Windows systems.
-
-To build on a UNIX or Linux system, use:
-
-    $ ./configure
-    $ make
-
-If you're planning on making changes to the BIND 9 source, you should run
-make depend. If you're using Emacs, you might find make tags helpful.
-
-Several environment variables that can be set before running configure
-will affect compilation:
-
-Variable       Description
-CC             The C compiler to use. configure tries to figure out the
-               right one for supported systems.
-               C compiler flags. Defaults to include -g and/or -O2 as
-CFLAGS         supported by the compiler. Please include '-g' if you need
-               to set CFLAGS.
-               System header file directories. Can be used to specify
-STD_CINCLUDES  where add-on thread or IPv6 support is, for example.
-               Defaults to empty string.
-               Any additional preprocessor symbols you want defined.
-STD_CDEFINES   Defaults to empty string. For a list of possible settings,
-               see the file OPTIONS.
-LDFLAGS        Linker flags. Defaults to empty string.
-BUILD_CC       Needed when cross-compiling: the native C compiler to use
-               when building for the target system.
-BUILD_CFLAGS   Optional, used for cross-compiling
-BUILD_CPPFLAGS
-BUILD_LDFLAGS
-BUILD_LIBS
-
-macOS
-
-Building on macOS assumes that the "Command Tools for Xcode" is installed.
-This can be downloaded from https://developer.apple.com/download/more/ or
-if you have Xcode already installed you can run "xcode-select --install".
-This will add /usr/include to the system and install the compiler and
-other tools so that they can be easily found.
-
-Compile-time options
-
-To see a full list of configuration options, run configure --help.
-
-On most platforms, BIND 9 is built with multithreading support, allowing
-it to take advantage of multiple CPUs. You can configure this by
-specifying --enable-threads or --disable-threads on the configure command
-line. The default is to enable threads, except on some older operating
-systems on which threads are known to have had problems in the past.
-(Note: Prior to BIND 9.10, the default was to disable threads on Linux
-systems; this has now been reversed. On Linux systems, the threaded build
-is known to change BIND's behavior with respect to file permissions; it
-may be necessary to specify a user with the -u option when running named.)
-
-To build shared libraries, specify --with-libtool on the configure command
-line.
-
-Certain compiled-in constants and default settings can be increased to
-values better suited to large servers with abundant memory resources (e.g,
-64-bit servers with 12G or more of memory) by specifying --with-tuning=
-large on the configure command line. This can improve performance on big
-servers, but will consume more memory and may degrade performance on
-smaller systems.
-
-For the server to support DNSSEC, you need to build it with crypto
-support. To use OpenSSL, you should have OpenSSL 1.0.2e or newer
-installed. If the OpenSSL library is installed in a nonstandard location,
-specify the prefix using "--with-openssl=<PREFIX>" on the configure
-command line. To use a PKCS#11 hardware service module for cryptographic
-operations, specify the path to the PKCS#11 provider library using
-"--with-pkcs11=<PREFIX>", and configure BIND with
-"--enable-native-pkcs11".
-
-To support the HTTP statistics channel, the server must be linked with at
-least one of the following: libxml2 http://xmlsoft.org or json-c https://
-github.com/json-c. If these are installed at a nonstandard location,
-specify the prefix using --with-libxml2=/prefix or --with-libjson=/prefix.
-
-To support GeoIP location-based ACLs, the server must be linked with
-libGeoIP. This is not turned on by default; BIND must be configured with
-"--with-geoip". If the library is installed in a nonstandard location, use
-specify the prefix using "--with-geoip=/prefix".
-
-Portions of BIND that are written in Python, including dnssec-coverage,
-dnssec-checkds, and some of the system tests, require the 'argparse'
-module to be available. 'argparse' is a standard module as of Python 2.7
-and Python 3.2.
-
-On some platforms it is necessary to explicitly request large file support
-to handle files bigger than 2GB. This can be done by using
---enable-largefile on the configure command line.
-
-Support for the "fixed" rrset-order option can be enabled or disabled by
-specifying --enable-fixed-rrset or --disable-fixed-rrset on the configure
-command line. By default, fixed rrset-order is disabled to reduce memory
-footprint.
-
-If your operating system has integrated support for IPv6, it will be used
-automatically. If you have installed KAME IPv6 separately, use --with-kame
-[=PATH] to specify its location.
-
-make install will install named and the various BIND 9 libraries. By
-default, installation is into /usr/local, but this can be changed with the
---prefix option when running configure.
-
-You may specify the option --sysconfdir to set the directory where
-configuration files like named.conf go by default, and --localstatedir to
-set the default parent directory of run/named.pid. For backwards
-compatibility with BIND 8, --sysconfdir defaults to /etc and
---localstatedir defaults to /var if no --prefix option is given. If there
-is a --prefix option, sysconfdir defaults to $prefix/etc and localstatedir
-defaults to $prefix/var.
-
-Automated testing
-
-A system test suite can be run with make test. The system tests require
-you to configure a set of virtual IP addresses on your system (this allows
-multiple servers to run locally and communicate with one another). These
-IP addresses can be configured by running the command bin/tests/system/
-ifconfig.sh up as root.
-
-Some tests require Perl and the Net::DNS and/or IO::Socket::INET6 modules,
-and will be skipped if these are not available. Some tests require Python
-and the 'dnspython' module and will be skipped if these are not available.
-See bin/tests/system/README for further details.
-
-Unit tests are implemented using Automated Testing Framework (ATF). To run
-them, use configure --with-atf, then run make test or make unit.
+	BIND version 9 is a major rewrite of nearly all aspects of the
+	underlying BIND architecture.  Some of the important features of
+	BIND 9 are:
+
+		- DNS Security
+			DNSSEC (signed zones)
+			TSIG (signed DNS requests)
+
+		- IP version 6
+			Answers DNS queries on IPv6 sockets
+			IPv6 resource records (AAAA)
+			Experimental IPv6 Resolver Library
+
+		- DNS Protocol Enhancements
+			IXFR, DDNS, Notify, EDNS0
+			Improved standards conformance
+
+		- Views
+			One server process can provide multiple "views" of
+			the DNS namespace, e.g. an "inside" view to certain
+			clients, and an "outside" view to others.
+
+		- Multiprocessor Support
+
+		- Improved Portability Architecture
+
+
+	BIND version 9 development has been underwritten by the following
+	organizations:
+
+		Sun Microsystems, Inc.
+		Hewlett Packard
+		Compaq Computer Corporation
+		IBM
+		Process Software Corporation
+		Silicon Graphics, Inc.
+		Network Associates, Inc.
+		U.S. Defense Information Systems Agency
+		USENIX Association
+		Stichting NLnet - NLnet Foundation
+		Nominum, Inc.
+
+	For a summary of functional enhancements in previous
+	releases, see the HISTORY file.
+
+	For a detailed list of user-visible changes from
+	previous releases, see the CHANGES file.
+
+BIND 9.8.2
+
+	BIND 9.8.2 includes a number of bug fixes and prevents a security
+	problem described in CVE-2011-4313
+
+BIND 9.8.1
+
+        BIND 9.8.1 includes a number of bug fixes and enhancements from
+	BIND 9.8 and earlier releases.  New features include:
+
+	- The DLZ "dlopen" driver is now built by default.
+	- Added a new include file with function typedefs
+          for the DLZ "dlopen" driver.
+	- Made "--with-gssapi" default.
+	- More verbose error reporting from DLZ LDAP.
+
+BIND 9.8.0
+
+        BIND 9.8.0 includes a number of changes from BIND 9.7 and earlier
+        releases.  New features include:
+
+        - Built-in trust anchor for the root zone, which can be
+          switched on via "dnssec-validation auto;"
+        - Support for DNS64.
+        - Support for response policy zones (RPZ).
+        - Support for writable DLZ zones.
+        - Improved ease of configuration of GSS/TSIG for
+          interoperability with Active Directory
+        - Support for GOST signing algorithm for DNSSEC.
+        - Removed RTT Banding from server selection algorithm.
+        - New "static-stub" zone type.
+        - Allow configuration of resolver timeouts via
+          "resolver-query-timeout" option.
+
+BIND 9.7.0
+
+	BIND 9.7.0 includes a number of changes from BIND 9.6 and earlier
+	releases.  Most are intended to simplify DNSSEC configuration.
+
+	New features include:
+
+	- Fully automatic signing of zones by "named".
+	- Simplified configuration of DNSSEC Lookaside Validation (DLV).
+	- Simplified configuration of Dynamic DNS, using the "ddns-confgen"
+	  command line tool or the "local" update-policy option.  (As a side
+	  effect, this also makes it easier to configure automatic zone
+	  re-signing.)
+	- New named option "attach-cache" that allows multiple views to
+	  share a single cache.
+	- DNS rebinding attack prevention.
+	- New default values for dnssec-keygen parameters.
+	- Support for RFC 5011 automated trust anchor maintenance
+	- Smart signing: simplified tools for zone signing and key
+	  maintenance.
+	- The "statistics-channels" option is now available on Windows.
+	- A new DNSSEC-aware libdns API for use by non-BIND9 applications
+	- On some platforms, named and other binaries can now print out
+	  a stack backtrace on assertion failure, to aid in debugging.
+	- A "tools only" installation mode on Windows, which only installs
+	  dig, host, nslookup and nsupdate.
+	- Improved PKCS#11 support, including Keyper support and explicit
+	  OpenSSL engine selection.
+
+	Known issues in this release:
+
+	- In rare cases, DNSSEC validation can leak memory.  When this 
+	  happens, it will cause an assertion failure when named exits,
+	  but is otherwise harmless.  A fix exists, but was too late for
+	  this release; it will be included in BIND 9.7.1.
+
+	Compatibility notes:
+
+	- If you had built BIND 9.6 with any of ALLOW_NSEC3PARAM_UPDATE,
+	  ALLOW_SECURE_TO_INSECURE or ALLOW_INSECURE_TO_SECURE defined, then
+	  you should ensure that all changes that are in progress have
+	  completed prior to upgrading to BIND 9.7.  BIND 9.7 implements
+	  those features in a way which is not backwards compatible.
+
+	- Prior releases had a bug which caused HMAC-SHA* keys with long
+	  secrets to be used incorrectly.  Fixing this bug means that older
+	  versions of BIND 9 may fail to interoperate with this version
+	  when using TSIG keys.  If this occurs, the new "isc-hmac-fixup"
+	  tool will convert a key with a long secret into a form that works
+	  correctly with all versions of BIND 9.  See the "isc-hmac-fixup"
+	  man page for additional details.
+
+	- Revoking a DNSSEC key with "dnssec-revoke" changes its key ID.
+	  It is possible for the new key ID to collide with that of a
+	  different key.  Newly generated keys will not have this problem,
+	  as "dnssec-keygen" looks for potential collisions before
+	  generating keys, but exercise caution if using key revokation
+	  with keys that were generated by older versions of BIND 9.  See
+	  the Administrator's Reference Manual, section 4.10 ("Dynamic
+	  Trust Anchor Management") for more details.
+
+	- A bug was fixed in which a key's scheduled inactivity date was
+	  stored incorectly.  Users who participated in the 9.7.0 BETA test
+	  and had DNSSEC keys with scheduled inactivity dates will need to
+	  reset those keys' dates using "dnssec-settime -I".
+
+Building
+
+	BIND 9 currently requires a UNIX system with an ANSI C compiler,
+	basic POSIX support, and a 64 bit integer type.
+
+	We've had successful builds and tests on the following systems:
+
+		COMPAQ Tru64 UNIX 5.1B
+		Fedora Core 6
+		FreeBSD 4.10, 5.2.1, 6.2
+		HP-UX 11.11
+		Mac OS X 10.5
+		NetBSD 3.x, 4.0-beta, 5.0-beta
+		OpenBSD 3.3 and up
+		Solaris 8, 9, 9 (x86), 10
+		Ubuntu 7.04, 7.10
+		Windows XP/2003/2008
+
+        NOTE:  As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
+        Windows, including Windows NT and Windows 2000, are no longer
+        supported.
+
+	We have recent reports from the user community that a supported
+	version of BIND will build and run on the following systems:
+
+		AIX 4.3, 5L
+		CentOS 4, 4.5, 5
+		Darwin 9.0.0d1/ARM
+		Debian 4
+		Fedora Core 5, 7
+		FreeBSD 6.1
+		HP-UX 11.23 PA
+		MacOS X 10.4, 10.5
+		Red Hat Enterprise Linux 4, 5
+		SCO OpenServer 5.0.6
+		Slackware 9, 10
+		SuSE 9, 10
+
+	To build, just
+
+		./configure
+		make
+
+	Do not use a parallel "make".
+
+	Several environment variables that can be set before running
+	configure will affect compilation:
+
+	    CC
+		The C compiler to use.	configure tries to figure
+		out the right one for supported systems.
+
+	    CFLAGS
+		C compiler flags.  Defaults to include -g and/or -O2
+		as supported by the compiler.  
+
+	    STD_CINCLUDES
+		System header file directories.	 Can be used to specify
+		where add-on thread or IPv6 support is, for example.
+		Defaults to empty string.
+
+	    STD_CDEFINES
+		Any additional preprocessor symbols you want defined.
+		Defaults to empty string.
+
+		Possible settings:
+		Change the default syslog facility of named/lwresd.
+		  -DISC_FACILITY=LOG_LOCAL0	
+		Enable DNSSEC signature chasing support in dig.
+		  -DDIG_SIGCHASE=1 (sets -DDIG_SIGCHASE_TD=1 and
+				    -DDIG_SIGCHASE_BU=1)
+		Disable dropping queries from particular well known ports.
+		  -DNS_CLIENT_DROPPORT=0
+	        Sibling glue checking in named-checkzone is enabled by default.
+		To disable the default check set.  -DCHECK_SIBLING=0
+		named-checkzone checks out-of-zone addresses by default.
+		To disable this default set.  -DCHECK_LOCAL=0
+		To create the default pid files in ${localstatedir}/run rather
+		than ${localstatedir}/run/{named,lwresd}/ set.
+		  -DNS_RUN_PID_DIR=0
+		Enable workaround for Solaris kernel bug about /dev/poll
+		  -DISC_SOCKET_USE_POLLWATCH=1
+		  The watch timeout is also configurable, e.g.,
+		  -DISC_SOCKET_POLLWATCH_TIMEOUT=20
+
+	    LDFLAGS
+		Linker flags. Defaults to empty string.
+
+	The following need to be set when cross compiling.
+
+	    BUILD_CC
+		The native C compiler.
+	    BUILD_CFLAGS (optional)
+	    BUILD_CPPFLAGS (optional)
+		Possible Settings:
+		-DNEED_OPTARG=1		(optarg is not declared in <unistd.h>)
+	    BUILD_LDFLAGS (optional)
+	    BUILD_LIBS (optional)
+
+	To build shared libraries, specify "--with-libtool" on the
+	configure command line.
+
+	For the server to support DNSSEC, you need to build it
+	with crypto support.  You must have OpenSSL 0.9.5a
+	or newer installed and specify "--with-openssl" on the
+	configure command line.  If OpenSSL is installed under
+	a nonstandard prefix, you can tell configure where to
+	look for it using "--with-openssl=/prefix".
+
+	On some platforms it is necessary to explictly request large
+	file support to handle files bigger than 2GB.  This can be
+	done by "--enable-largefile" on the configure command line.
+
+	On some platforms, BIND 9 can be built with multithreading
+	support, allowing it to take advantage of multiple CPUs.
+	You can specify whether to build a multithreaded BIND 9 
+	by specifying "--enable-threads" or "--disable-threads"
+	on the configure command line.  The default is operating
+	system dependent.
+
+        Support for the "fixed" rrset-order option can be enabled
+        or disabled by specifying "--enable-fixed-rrset" or
+        "--disable-fixed-rrset" on the configure command line.
+        The default is "disabled", to reduce memory footprint.
+
+	If your operating system has integrated support for IPv6, it
+	will be used automatically.  If you have installed KAME IPv6
+	separately, use "--with-kame[=PATH]" to specify its location.
+
+	"make install" will install "named" and the various BIND 9 libraries.
+	By default, installation is into /usr/local, but this can be changed
+	with the "--prefix" option when running "configure".
+
+	You may specify the option "--sysconfdir" to set the directory 
+	where configuration files like "named.conf" go by default,
+	and "--localstatedir" to set the default parent directory
+	of "run/named.pid".   For backwards compatibility with BIND 8,
+	--sysconfdir defaults to "/etc" and --localstatedir defaults to
+	"/var" if no --prefix option is given.  If there is a --prefix
+	option, sysconfdir defaults to "$prefix/etc" and localstatedir
+	defaults to "$prefix/var".
+
+	To see additional configure options, run "configure --help".
+	Note that the help message does not reflect the BIND 8 
+	compatibility defaults for sysconfdir and localstatedir.
+
+	If you're planning on making changes to the BIND 9 source, you
+	should also "make depend".  If you're using Emacs, you might find
+	"make tags" helpful.
+
+	If you need to re-run configure please run "make distclean" first.
+	This will ensure that all the option changes take.
+
+	Building with gcc is not supported, unless gcc is the vendor's usual
+	compiler (e.g. the various BSD systems, Linux).
+	
+	Known compiler issues:
+	* gcc-3.2.1 and gcc-3.1.1 is known to cause problems with solaris-x86.
+	* gcc prior to gcc-3.2.3 ultrasparc generates incorrect code at -02.
+	* gcc-3.3.5 powerpc generates incorrect code at -02.
+	* Irix, MipsPRO 7.4.1m is known to cause problems.
+
+	A limited test suite can be run with "make test".  Many of
+	the tests require you to configure a set of virtual IP addresses
+	on your system, and some require Perl; see bin/tests/system/README
+	for details.
+
+	SunOS 4 requires "printf" to be installed to make the shared
+	libraries.  sh-utils-1.16 provides a "printf" which compiles
+	on SunOS 4.
+
 
 Documentation
 
-The BIND 9 Administrator Reference Manual is included with the source
-distribution, in DocBook XML, HTML and PDF format, in the doc/arm
-directory.
+	The BIND 9 Administrator Reference Manual is included with the
+	source distribution in DocBook XML and HTML format, in the
+	doc/arm directory.
 
-Some of the programs in the BIND 9 distribution have man pages in their
-directories. In particular, the command line options of named are
-documented in bin/named/named.8.
+	Some of the programs in the BIND 9 distribution have man pages
+	in their directories.  In particular, the command line
+	options of "named" are documented in /bin/named/named.8.
+	There is now also a set of man pages for the lwres library.
 
-Frequently (and not-so-frequently) asked questions and their answers can
-be found in the ISC Knowledge Base at https://kb.isc.org.
+	If you are upgrading from BIND 8, please read the migration
+	notes in doc/misc/migration.  If you are upgrading from
+	BIND 4, read doc/misc/migration-4to9.
 
-Additional information on various subjects can be found in other README
-files throughout the source tree.
+	Frequently asked questions and their answers can be found in
+	FAQ.
 
-Change log
+        Additional information on various subjects can be found
+        in the other README files.
 
-A detailed list of all changes that have been made throughout the
-development BIND 9 is included in the file CHANGES, with the most recent
-changes listed first. Change notes include tags indicating the category of
-the change that was made; these categories are:
 
-Category       Description
-[func]         New feature
-[bug]          General bug fix
-[security]     Fix for a significant security flaw
-[experimental] Used for new features when the syntax or other aspects of
-               the design are still in flux and may change
-[port]         Portability enhancement
-[maint]        Updates to built-in data such as root server addresses and
-               keys
-[tuning]       Changes to built-in configuration defaults and constants to
-               improve performance
-[performance]  Other changes to improve server performance
-[protocol]     Updates to the DNS protocol such as new RR types
-[test]         Changes to the automatic tests, not affecting server
-               functionality
-[cleanup]      Minor corrections and refactoring
-[doc]          Documentation
-[contrib]      Changes to the contributed tools and libraries in the
-               'contrib' subdirectory
-               Used in the master development branch to reserve change
-[placeholder]  numbers for use in other branches, e.g. when fixing a bug
-               that only exists in older releases
+Change Log
 
-In general, [func] and [experimental] tags will only appear in new-feature
-releases (i.e., those with version numbers ending in zero). Some new
-functionality may be backported to older releases on a case-by-case basis.
-All other change types may be applied to all currently-supported releases.
+	A detailed list of all changes to BIND 9 is included in the 
+	file CHANGES, with the most recent changes listed first.
+	Change notes include tags indicating the category of the
+	change that was made; these categories are:
 
-Acknowledgments
+	   [func]	  New feature
 
-  * The original development of BIND 9 was underwritten by the following
-    organizations:
+	   [bug]	  General bug fix
+
+	   [security]	  Fix for a significant security flaw
+
+	   [experimental] Used for new features when the syntax
+	   		  or other aspects of the design are still
+			  in flux and may change
+
+	   [port]	  Portability enhancement
+
+	   [maint]	  Updates to built-in data such as root
+			  server addresses and keys
+
+	   [tuning]	  Changes to built-in configuration defaults
+	   		  and constants to improve performanceo
+
+	   [protocol]	  Updates to the DNS protocol such as new
+			  RR types
+
+           [test]         Changes to the automatic tests, not
+                          affecting server functionality
+
+           [cleanup]      Minor corrections and refactoring
+
+	   [doc]	  Documentation
+
+	In general, [func] and [experimental] tags will only appear
+	in new-feature releases (i.e., those with version numbers
+	ending in zero).  Some new functionality may be backported to
+	older releases on a case-by-case basis.  All other change
+	types may be applied to all currently-supported releases.
+
+
+Bug Reports and Mailing Lists
+
+	Bugs reports should be sent to
+
+		bind9-bugs@isc.org
+
+	To join the BIND Users mailing list, send mail to
+
+		bind-users-request@isc.org
+
+	archives of which can be found via
+
+		http://www.isc.org/ops/lists/
+
+	If you're planning on making changes to the BIND 9 source
+	code, you might want to join the BIND Workers mailing list.
+	Send mail to
+
+		bind-workers-request@isc.org
 
-    Sun Microsystems, Inc.
-    Hewlett Packard
-    Compaq Computer Corporation
-    IBM
-    Process Software Corporation
-    Silicon Graphics, Inc.
-    Network Associates, Inc.
-    U.S. Defense Information Systems Agency
-    USENIX Association
-    Stichting NLnet - NLnet Foundation
-    Nominum, Inc.
 
-  * This product includes software developed by the OpenSSL Project for
-    use in the OpenSSL Toolkit. http://www.OpenSSL.org/
-  * This product includes cryptographic software written by Eric Young
-    (eay@cryptsoft.com)
-  * This product includes software written by Tim Hudson
-    (tjh@cryptsoft.com)

README.md

@@ -1,509 +0,0 @@
-<!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
--->
-# BIND 9
-
-### Contents
-
-1. [Introduction](#intro)
-1. [Reporting bugs and getting help](#help)
-1. [Contributing to BIND](#contrib)
-1. [BIND 9.10 features](#features)
-1. [Building BIND](#build)
-1. [macOS](#macos)
-1. [Compile-time options](#opts)
-1. [Automated testing](#testing)
-1. [Documentation](#doc)
-1. [Change log](#changes)
-1. [Acknowledgments](#ack)
-
-### <a name="intro"/> Introduction
-
-BIND (Berkeley Internet Name Domain) is a complete, highly portable
-implementation of the DNS (Domain Name System) protocol.
-
-The BIND name server, `named`, is able to serve as an authoritative name
-server, recursive resolver, DNS forwarder, or all three simultaneously.  It
-implements views for split-horizon DNS, automatic DNSSEC zone signing and
-key management, catalog zones to facilitate provisioning of zone data
-throughout a name server constellation, response policy zones (RPZ) to
-protect clients from malicious data, response rate limiting (RRL) and
-recursive query limits to reduce distributed denial of service attacks,
-and many other advanced DNS features.  BIND also includes a suite of
-administrative tools, including the `dig` and `delv` DNS lookup tools,
-`nsupdate` for dynamic DNS zone updates, `rndc` for remote name server
-administration, and more.
-
-BIND 9 is a complete re-write of the BIND architecture that was used in
-versions 4 and 8.  Internet Systems Consortium
-([https://www.isc.org](https://www.isc.org)), a 501(c)(3) public benefit
-corporation dedicated to providing software and services in support of the
-Internet infrastructure, developed BIND 9 and is responsible for its
-ongoing maintenance and improvement.  BIND is open source software
-licenced under the terms of the ISC License for all versions up to and
-including BIND 9.10, and the Mozilla Public License version 2.0 for all
-subsequent verisons.
-
-For a summary of features introduced in past major releases of BIND,
-see the file [HISTORY](HISTORY.md).
-
-For a detailed list of changes made throughout the history of BIND 9, see
-the file [CHANGES](CHANGES). See [below](#changes) for details on the
-CHANGES file format.
-
-For up-to-date release notes and errata, see
-[http://www.isc.org/software/bind9/releasenotes](http://www.isc.org/software/bind9/releasenotes)
-
-### <a name="help"/> Reporting bugs and getting help
-
-To report non-security-sensitive bugs or request new features, you may
-open an Issue in the BIND 9 project on the
-[ISC GitLab server](https://gitlab.isc.org) at
-[https://gitlab.isc.org/isc-projects/bind9](https://gitlab.isc.org/isc-projects/bind9).
-
-Please note that, unless you explicitly mark the newly created Issue as
-"confidential", it will be publicly readable.  Please do not include any
-information in bug reports that you consider to be confidential unless
-the issue has been marked as such.  In particular, if submitting the
-contents of your configuration file in a non-confidential Issue, it is
-advisable to obscure key secrets: this can be done automatically by
-using `named-checkconf -px`.
-
-If the bug you are reporting is a potential security issue, such as an
-assertion failure or other crash in `named`, please do *NOT* use GitLab to
-report it. Instead, please send mail to
-[security-officer@isc.org](mailto:security-officer@isc.org).
-
-Professional support and training for BIND are available from
-ISC at [https://www.isc.org/support](https://www.isc.org/support).
-
-To join the __BIND Users__ mailing list, or view the archives, visit
-[https://lists.isc.org/mailman/listinfo/bind-users](https://lists.isc.org/mailman/listinfo/bind-users).
-
-If you're planning on making changes to the BIND 9 source code, you
-may also want to join the __BIND Workers__ mailing list, at
-[https://lists.isc.org/mailman/listinfo/bind-workers](https://lists.isc.org/mailman/listinfo/bind-workers).
-
-### <a name="contrib"/> Contributing to BIND
-
-ISC maintains a public git repository for BIND; details can be found
-at [http://www.isc.org/git/](http://www.isc.org/git/).
-
-Information for BIND contributors can be found in the following files:
-- General information: [doc/dev/contrib.md](doc/dev/contrib.md)
-- BIND 9 code style: [doc/dev/style.md](doc/dev/style.md)
-- BIND architecture and developer guide: [doc/dev/dev.md](doc/dev/dev.md)
-
-Patches for BIND may be submitted as
-[Merge Requests](https://gitlab.isc.org/isc-projects/bind9/merge_requests)
-in the [ISC GitLab server](https://gitlab.isc.org) at
-at [https://gitlab.isc.org/isc-projects/bind9/merge_requests](https://gitlab.isc.org/isc-projects/bind9/merge_requests).
-
-By default, external contributors don't have ability to fork BIND in the
-GitLab server, but if you wish to contribute code to BIND, you may request
-permission to do so. Thereafter, you can create git branches and directly
-submit requests that they be reviewed and merged.
-
-If you prefer, you may also submit code by opening a
-[GitLab Issue](https://gitlab.isc.org/isc-projects/bind9/issues) and
-including your patch as an attachment, preferably generated by
-`git format-patch`.
-
-### <a name="features"/> BIND 9.10 features
-
-BIND 9.10.0 includes a number of changes from BIND 9.9 and earlier
-releases.  New features include:
-
- * DNS Response-rate limiting (DNS RRL), which blunts the impact of
-   reflection and amplification attacks, is always compiled in and no
-   longer requires a compile-time option to enable it.
- * An experimental "Source Identity Token" (SIT) EDNS option is now
-   available.  Similar to DNS Cookies as invented by Donald Eastlake 3rd,
-   these are designed to enable clients to detect off-path spoofed
-   responses, and to enable servers to detect spoofed-source queries.
-   Servers can be configured to send smaller responses to clients that have
-   not identified themselves using a SIT option, reducing the effectiveness
-   of amplification attacks.  RRL processing has also been updated; clients
-   proven to be legitimate via SIT are not subject to rate limiting.  Use
-   `configure --enable-sit` to enable this feature in BIND.
- * A new zone file format, `map`, stores zone data in a format that can be
-   mapped directly into memory, allowing significantly faster zone loading.
- * `delv` (domain entity lookup and validation) is a new tool with dig-like
-   semantics for looking up DNS data and performing internal DNSSEC
-   validation.  This allows easy validation in environments where the
-   resolver may not be trustworthy, and assists with troubleshooting of
-   DNSSEC problems. (NOTE: In previous development releases of BIND 9.10,
-   this utility was called `delve`. The spelling has been changed to avoid
-   confusion with the `delve` utility included with the Xapian search
-   engine.)
- * Improved EDNS(0) processing for better resolver performance and
-   reliability over slow or lossy connections.
- * A new `configure --with-tuning=large` option tunes certain compiled-in
-   constants and default settings to values better suited to large servers
-   with abundant memory.  This can improve performance on such servers, but
-   will consume more memory and may degrade performance on smaller systems.
- * Substantial improvement in response-policy zone (RPZ) performance.  Up
-   to 32 response-policy zones can be configured with minimal performance
-   loss.
- * To improve recursive resolver performance, cache records which are still
-   being requested by clients can now be automatically refreshed from the
-   authoritative server before they expire, reducing or eliminating the
-   time window in which no answer is available in the cache.
- * New `rpz-client-ip` triggers and drop policies allowing response
-   policies based on the IP address of the client.
- * ACLs can now be specified based on geographic location using the MaxMind
-   GeoIP databases.  Use `configure --with-geoip` to enable.
- * Zone data can now be shared between views, allowing multiple views to
-   serve the same zones authoritatively without storing multiple copies in
-   memory.
- * New XML schema (version 3) for the statistics channel includes many new
-   statistics and uses a flattened XML tree for faster parsing. The older
-   schema is now deprecated.
- * A new stylesheet, based on the Google Charts API, displays XML
-   statistics in charts and graphs on javascript-enabled browsers.
- * The statistics channel can now provide data in JSON format as well as
-   XML.
- * New stats counters track TCP and UDP queries received per zone, and EDNS
-   options received in total.
- * The internal and export versions of the BIND libraries (libisc, libdns,
-   etc) have been unified so that external library clients can use the same
-   libraries as BIND itself.
- * A new compile-time option, `configure --enable-native-pkcs11`, allows
-   BIND 9 cryptography functions to use the PKCS#11 API natively, so that
-   BIND can drive a cryptographic hardware service module (HSM) directly
-   instead of using a modified OpenSSL as an intermediary. (Note: This
-   feature requires an HSM to have a full implementation of the PKCS#11
-   API; many current HSMs only have partial implementations. The new
-   `pkcs11-tokens` command can be used to check API completeness.  Native
-   PKCS#11 is known to work with the Thales nShield HSM and with SoftHSM
-   version 2 from the Open DNSSEC project.)
- * The new `max-zone-ttl` option enforces maximum TTLs for zones. This can
-   simplify the process of rolling DNSSEC keys by guaranteeing that cached
-   signatures will have expired within the specified amount of time.
- * `dig +subnet` sends an EDNS CLIENT-SUBNET option when querying.
- * `dig +expire` sends an EDNS EXPIRE option when querying.  When this
-   option is sent with an SOA query to a server that supports it, it will
-   report the expiry time of a slave zone.
- * New `dnssec-coverage` tool to check DNSSEC key coverage for a zone and
-   report if a lapse in signing coverage has been inadvertently scheduled.
- * Signing algorithm flexibility and other improvements for the `rndc`
-   control channel.
- * `named-checkzone` and `named-compilezone` can now read journal files,
-   allowing them to process dynamic zones.
- * Multiple DLZ databases can now be configured.  Individual zones can be
-   configured to be served from a specific DLZ database.  DLZ databases now
-   serve zones of type `master` and `redirect`.
- * `rndc zonestatus` reports information about a specified zone.
- * `named` now listens on IPv6 as well as IPv4 interfaces by default.
- * `named` now preserves the capitalization of names when responding to
-   queries: for instance, a query for "example.com" may be answered with
-   "example.COM" if the name was configured that way in the zone file.
-   Some clients have a bug causing them to depend on the older behavior, in
-   which the case of the answer always matched the case of the query,
-   rather than the case of the name configured in the DNS.  Such clients
-   can now be specified in the new `no-case-compress` ACL; this will
-   restore the older behavior of `named` for those clients only.
- * new `dnssec-importkey` command allows the use of offline DNSSEC keys
-   with automatic DNSKEY management.
- * New `named-rrchecker` tool to verify the syntactic correctness of
-   individual resource records.
- * When re-signing a zone, the new `dnssec-signzone -Q` option drops
-   signatures from keys that are still published but are no longer active.
- * `named-checkconf -px` will print the contents of configuration files
-   with the shared secrets obscured, making it easier to share
-   configuration (e.g. when submitting a bug report) without revealing
-   private information.
- * `rndc scan` causes named to re-scan network interfaces for changes in
-   local addresses.
- * On operating systems with support for routing sockets, network
-   interfaces are re-scanned automatically whenever they change.
- * `tsig-keygen` is now available as an alternate command name to use for
-   `ddns-confgen`.
-
-#### BIND 9.10.1
-
-BIND 9.10.1 is a maintenance release, and addresses the security flaws
-described in CVE-2014-3214 and CVE-2014-3859.
-
-#### BIND 9.10.2
-
-BIND 9.10.2 is a maintenance release, and addresses the security flaws
-described in CVE-2014-8500, CVE-2014-8680 and CVE-2015-1349.
-
-#### BIND 9.10.3
-
-BIND 9.10.3 is a maintenance release, and addresses the security flaws
-described in CVE-2015-4620, CVE-2015-5477, CVE-2015-5722, and
-CVE-2015-5986.
-
-It also makes the following new features available:
-
-* New "fetchlimit" quotas are now available for the use of
-  recursive resolvers that are are under high query load for
-  domains whose authoritative servers are nonresponsive or are
-  experiencing a denial of service attack.
-
-    * `fetches-per-server` limits the number of simultaneous queries that
-      can be sent to any single authoritative server.  The configured value
-      is a starting point; it is automatically adjusted downward if the
-      server is partially or completely non-responsive. The algorithm used
-      to adjust the quota can be configured via the `fetch-quota-params`
-      option.
-    * `fetches-per-zone` limits the number of simultaneous queries that can
-      be sent for names within a single domain.  (Note: Unlike
-      `fetches-per-server`, this value is not self-tuning.)
-    * New stats counters have been added to count queries spilled due to
-      these quotas.
-
-  NOTE: These features are NOT built in by default; use
-  `configure --enable-fetchlimit` to enable them.
-
-* `dig` now supports sending of arbitrary EDNS options by specifying
-  them on the command line.
-
-#### BIND 9.10.4
-
-BIND 9.10.4 is a maintenance release, and addresses the security flaws
-described in CVE-2015-8000, CVE-2015-8461, CVE-2015-8704, CVE-2015-8705,
-CVE-2016-1285, CVE-2016-1286, CVE-2016-2088, CVE-2016-2775 and
-CVE-2016-2776.
-
-#### BIND 9.10.5
-	
-BIND 9.10.5 is a maintenance release, and addresses the security flaws
-disclosed in CVE-2016-2775, CVE-2016-2776, CVE-2016-6170, CVE-2016-8864,
-CVE-2016-9131, CVE-2016-9147, CVE-2016-9444, CVE-2017-3135, CVE-2017-3136,
-CVE-2017-3137, and CVE-2017-3138.
-
-#### BIND 9.10.6
-
-BIND 9.10.6 is a maintenance release, and addresses the security
-flaws disclosed in CVE-2017-3140 and CVE-2017-3141, CVE-2017-3142
-and CVE-2017-3143.
-
-#### BIND 9.10.7
-
-BIND 9.10.7 is a maintenance release, and addresses the security
-flaw disclosed in CVE-2017-3145.
-
-#### BIND 9.10.8
-
-BIND 9.10.8 is a maintenance release, and addresses the security flaw
-disclosed in CVE-2018-5738.
-
-### <a name="build"/> Building BIND
-
-BIND requires a UNIX or Linux system with an ANSI C compiler, basic POSIX
-support, and a 64-bit integer type. Successful builds have been observed on
-many versions of Linux and UNIX, including RedHat, Fedora, Debian, Ubuntu,
-SuSE, Slackware, FreeBSD, NetBSD, OpenBSD, Mac OS X, Solaris, HP-UX, AIX,
-SCO OpenServer, and OpenWRT. 
-
-BIND is also available for Windows XP, 2003, 2008, and higher.  See
-`win32utils/readme1st.txt` for details on building for Windows systems.
-
-To build on a UNIX or Linux system, use:
-
-		$ ./configure
-		$ make
-
-If you're planning on making changes to the BIND 9 source, you should run
-`make depend`.  If you're using Emacs, you might find `make tags` helpful.
-
-Several environment variables that can be set before running `configure` will
-affect compilation:
-
-|Variable|Description |
-|--------------------|-----------------------------------------------|
-|`CC`|The C compiler to use.  `configure` tries to figure out the right one for supported systems.|
-|`CFLAGS`|C compiler flags.  Defaults to include -g and/or -O2 as supported by the compiler.  Please include '-g' if you need to set `CFLAGS`. |
-|`STD_CINCLUDES`|System header file directories.  Can be used to specify where add-on thread or IPv6 support is, for example.  Defaults to empty string.|
-|`STD_CDEFINES`|Any additional preprocessor symbols you want defined.  Defaults to empty string. For a list of possible settings, see the file [OPTIONS](OPTIONS.md).|
-|`LDFLAGS`|Linker flags. Defaults to empty string.|
-|`BUILD_CC`|Needed when cross-compiling: the native C compiler to use when building for the target system.|
-|`BUILD_CFLAGS`|Optional, used for cross-compiling|
-|`BUILD_CPPFLAGS`||
-|`BUILD_LDFLAGS`||
-|`BUILD_LIBS`||
-
-#### <a name="macos"> macOS
-
-Building on macOS assumes that the "Command Tools for Xcode" is installed.
-This can be downloaded from https://developer.apple.com/download/more/
-or if you have Xcode already installed you can run "xcode-select --install".
-This will add /usr/include to the system and install the compiler and other
-tools so that they can be easily found.
-
-
-#### <a name="opts"/> Compile-time options
-
-To see a full list of configuration options, run `configure --help`.
-
-On most platforms, BIND 9 is built with multithreading support, allowing it
-to take advantage of multiple CPUs.  You can configure this by specifying
-`--enable-threads` or `--disable-threads` on the `configure` command line.
-The default is to enable threads, except on some older operating systems on
-which threads are known to have had problems in the past.  (Note: Prior to
-BIND 9.10, the default was to disable threads on Linux systems; this has
-now been reversed.  On Linux systems, the threaded build is known to change
-BIND's behavior with respect to file permissions; it may be necessary to
-specify a user with the -u option when running `named`.)
-
-To build shared libraries, specify `--with-libtool` on the `configure`
-command line.
-
-Certain compiled-in constants and default settings can be increased to
-values better suited to large servers with abundant memory resources (e.g,
-64-bit servers with 12G or more of memory) by specifying
-`--with-tuning=large` on the `configure` command line. This can improve
-performance on big servers, but will consume more memory and may degrade
-performance on smaller systems.
-
-For the server to support DNSSEC, you need to build it with crypto support.
-To use OpenSSL, you should have OpenSSL 1.0.2e or newer installed.  If the
-OpenSSL library is installed in a nonstandard location, specify the prefix
-using "--with-openssl=&lt;PREFIX&gt;" on the configure command line. To use a
-PKCS#11 hardware service module for cryptographic operations, specify the
-path to the PKCS#11 provider library using "--with-pkcs11=&lt;PREFIX&gt;", and
-configure BIND with "--enable-native-pkcs11".
-
-To support the HTTP statistics channel, the server must be linked with at
-least one of the following: libxml2
-[http://xmlsoft.org](http://xmlsoft.org) or json-c
-[https://github.com/json-c](https://github.com/json-c).  If these are
-installed at a nonstandard location, specify the prefix using
-`--with-libxml2=/prefix` or `--with-libjson=/prefix`.
-
-To support GeoIP location-based ACLs, the server must be linked with
-libGeoIP. This is not turned on by default; BIND must be configured with
-"--with-geoip". If the library is installed in a nonstandard location, use
-specify the prefix using "--with-geoip=/prefix".
-
-Portions of BIND that are written in Python, including
-`dnssec-coverage`, `dnssec-checkds`, and some of the
-system tests, require the 'argparse' module to be available.
-'argparse' is a standard module as of Python 2.7 and Python 3.2.
-
-On some platforms it is necessary to explicitly request large file support
-to handle files bigger than 2GB.  This can be done by using
-`--enable-largefile` on the `configure` command line.
-
-Support for the "fixed" rrset-order option can be enabled or disabled by
-specifying `--enable-fixed-rrset` or `--disable-fixed-rrset` on the
-configure command line.  By default, fixed rrset-order is disabled to
-reduce memory footprint.
-
-If your operating system has integrated support for IPv6, it will be used
-automatically.  If you have installed KAME IPv6 separately, use
-`--with-kame[=PATH]` to specify its location.
-
-`make install` will install `named` and the various BIND 9 libraries.  By
-default, installation is into /usr/local, but this can be changed with the
-`--prefix` option when running `configure`.
-
-You may specify the option `--sysconfdir` to set the directory where
-configuration files like `named.conf` go by default, and `--localstatedir`
-to set the default parent directory of `run/named.pid`.   For backwards
-compatibility with BIND 8, `--sysconfdir` defaults to `/etc` and
-`--localstatedir` defaults to `/var` if no `--prefix` option is given.  If
-there is a `--prefix` option, sysconfdir defaults to `$prefix/etc` and
-localstatedir defaults to `$prefix/var`.
-
-### <a name="testing"/> Automated testing
-
-A system test suite can be run with `make test`.  The system tests require
-you to configure a set of virtual IP addresses on your system (this allows
-multiple servers to run locally and communicate with one another).  These
-IP addresses can be configured by running the command
-`bin/tests/system/ifconfig.sh up` as root.
-
-Some tests require Perl and the Net::DNS and/or IO::Socket::INET6 modules,
-and will be skipped if these are not available. Some tests require Python
-and the 'dnspython' module and will be skipped if these are not available.
-See bin/tests/system/README for further details.
-
-Unit tests are implemented using Automated Testing Framework (ATF).
-To run them, use `configure --with-atf`, then run `make test` or
-`make unit`.
-
-### <a name="doc"/> Documentation
-
-The *BIND 9 Administrator Reference Manual* is included with the source
-distribution, in DocBook XML, HTML and PDF format, in the `doc/arm`
-directory.
-
-Some of the programs in the BIND 9 distribution have man pages in their
-directories.  In particular, the command line options of `named` are
-documented in `bin/named/named.8`.
-
-Frequently (and not-so-frequently) asked questions and their answers
-can be found in the ISC Knowledge Base at
-[https://kb.isc.org](https://kb.isc.org).
-
-Additional information on various subjects can be found in other
-`README` files throughout the source tree.
-
-### <a name="changes"/> Change log
-
-A detailed list of all changes that have been made throughout the
-development BIND 9 is included in the file CHANGES, with the most recent
-changes listed first.  Change notes include tags indicating the category of
-the change that was made; these categories are:
-
-|Category	|Description	        			|
-|--------------	|-----------------------------------------------|
-| [func] | New feature |
-| [bug] | General bug fix |
-| [security] | Fix for a significant security flaw |
-| [experimental] | Used for new features when the syntax or other aspects of the design are still in flux and may change |
-| [port] | Portability enhancement |
-| [maint] | Updates to built-in data such as root server addresses and keys |
-| [tuning] | Changes to built-in configuration defaults and constants to improve performance |
-| [performance] | Other changes to improve server performance |
-| [protocol] | Updates to the DNS protocol such as new RR types |
-| [test] | Changes to the automatic tests, not affecting server functionality |
-| [cleanup] | Minor corrections and refactoring |
-| [doc] | Documentation |
-| [contrib] | Changes to the contributed tools and libraries in the 'contrib' subdirectory |
-| [placeholder] | Used in the master development branch to reserve change numbers for use in other branches, e.g. when fixing a bug that only exists in older releases |
-
-In general, [func] and [experimental] tags will only appear in new-feature
-releases (i.e., those with version numbers ending in zero).  Some new
-functionality may be backported to older releases on a case-by-case basis.
-All other change types may be applied to all currently-supported releases.
-
-### <a name="ack"/> Acknowledgments
-
-* The original development of BIND 9 was underwritten by the
-  following organizations:
-
-		Sun Microsystems, Inc.
-		Hewlett Packard
-		Compaq Computer Corporation
-		IBM
-		Process Software Corporation
-		Silicon Graphics, Inc.
-		Network Associates, Inc.
-		U.S. Defense Information Systems Agency
-		USENIX Association
-		Stichting NLnet - NLnet Foundation
-		Nominum, Inc.
-
-* This product includes software developed by the OpenSSL Project for use
-  in the OpenSSL Toolkit.
-  [http://www.OpenSSL.org/](http://www.OpenSSL.org/)
-* This product includes cryptographic software written by Eric Young
-  (eay@cryptsoft.com)
-* This product includes software written by Tim Hudson (tjh@cryptsoft.com)

RELEASE-NOTES-BIND-9.8.1.html

@@ -0,0 +1,368 @@
+<html><head><meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"><title></title><link rel="stylesheet" href="release-notes.css" type="text/css"><meta name="generator" content="DocBook XSL Stylesheets V1.71.1"></head><body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="article" lang="en"><div class="titlepage"><hr></div>
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3359008"></a>Introduction</h2></div></div></div>
+    
+    <p>
+			BIND 9.8.1 is the current production release of BIND 9.8.
+		</p>
+    <p>
+			This document summarizes changes from BIND 9.8.0 to BIND 9.8.1.
+			Please see the CHANGES file in the source code release for a
+			complete list of all changes.
+		</p>
+  </div>
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3359050"></a>Download</h2></div></div></div>
+    
+    <p>
+			The latest versions of BIND 9 software can always be found
+	 		on our web site at
+ <a href="http://www.isc.org/downloads/all" target="_top">http://www.isc.org/downloads/all</a>.
+                There you will find additional information about each
+		release, source code, and some pre-compiled versions for certain operating systems.
+		</p>
+  </div>
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id2545549"></a>Support</h2></div></div></div>
+    
+    <p>Product support information is available on
+      <a href="http://www.isc.org/services/support" target="_top">http://www.isc.org/services/support</a>
+      for paid support options.  Free support is provided by our user
+ 			community via a mailing list.  Information on all public email
+ 			lists is available at
+      <a href="https://lists.isc.org/mailman/listinfo" target="_top">https://lists.isc.org/mailman/listinfo</a>.
+    </p>
+  </div>
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3358108"></a>New Features</h2></div></div></div>
+    
+		<div class="section" lang="en"><div class="titlepage"><div><div><h3 class="title"><a name="id3358149"></a>9.8.1</h3></div></div></div>
+			
+	    <div class="itemizedlist"><ul type="disc"><li>
+Added a new include file with function typedefs
+for the DLZ "dlopen" driver. [RT #23629]
+</li><li>
+Added a tool able to generate malformed packets to allow testing
+of how named handles them.
+[RT #24096]
+</li><li>
+The root key is now provided in the file bind.keys allowing DNSSEC validation to be switched on at start up by adding "dnssec-validation auto;" to named.conf. If the root key provided has expired, named will log the expiration and validation will not work.  More information and the most current copy of bind.keys can be found at http://www.isc.org/bind-keys. *Please note this feature was actually added in 9.8.0 but was not included in the 9.8.0 release notes. [RT #21727]
+</li></ul></div>
+		</div>
+  </div>
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3358206"></a>Security Fixes</h2></div></div></div>
+    
+		<div class="section" lang="en"><div class="titlepage"><div><div><h3 class="title"><a name="id3358226"></a>9.8.1</h3></div></div></div>
+			
+	    <div class="itemizedlist"><ul type="disc"><li>
+If named is configured with a response policy zone (RPZ) and a query
+of type RRSIG is received for a name configured for RRset replacement
+in that RPZ, it will trigger an INSIST and crash the server.
+RRSIG. [RT #24280]
+</li><li>
+named, set up to be a caching resolver, is vulnerable to a
+user querying a domain with very large resource record sets (RRSets)
+when trying to negatively cache the response. Due to an off-by-one
+error, caching the response could cause named to crash. [RT #24650]
+[CVE-2011-1910]
+</li><li>
+Using Response Policy Zone (RPZ) to query a wildcard CNAME label with
+QUERY type SIG/RRSIG, it can cause named to crash. Fix is query type
+independant.
+[RT #24715]
+</li><li>
+Using Response Policy Zone (RPZ) with DNAME records and querying the
+subdomain of that label can cause named to crash. Now logs that DNAME
+is not supported.
+[RT #24766]
+</li><li>
+Change #2912 populated the message section in replies to UPDATE requests,
+which some Windows clients wanted. This exposed a latent bug that allowed
+the response message to crash named. With this fix, change 2912 has been
+reduced to copy only the zone section to the reply. A more complete fix
+for the latent bug will be released later.
+[RT #24777]
+</li></ul></div>
+		</div>
+  </div>
+
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3358283"></a>Feature Changes</h2></div></div></div>
+    
+		<div class="section" lang="en"><div class="titlepage"><div><div><h3 class="title"><a name="id3358291"></a>9.8.1</h3></div></div></div>
+			
+	    <div class="itemizedlist"><ul type="disc"><li>
+Merged in the NetBSD ATF test framework (currently
+version 0.12) for development of future unit tests.
+Use configure --with-atf to build ATF internally
+or configure --with-atf=prefix to use an external
+copy. [RT #23209]
+</li><li>
+Added more verbose error reporting from DLZ LDAP. [RT #23402]
+</li><li>
+The DLZ "dlopen" driver is now built by default,
+no longer requiring a configure option. To
+disable it, use "configure --without-dlopen".
+(Note: driver not supported on win32.) [RT #23467]
+</li><li>
+Replaced compile time constant with STDTIME_ON_32BITS.
+[RT #23587]
+</li><li>
+Make --with-gssapi default for ./configure. [RT #23738]
+</li><li>
+Improved the startup time for an authoritative server with a large 
+number of zones by making the zone task table of variable size
+rather than fixed size.  This means that authoritative servers with
+lots of zones will be serving that zone data much sooner. [RT #24406]
+</li><li>
+Per RFC 6303, RFC 1918 reverse zones are now part of the built-in list of empty zones. [RT #24990]
+</li></ul></div>
+		</div>
+  </div>
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3358460"></a>Bug Fixes</h2></div></div></div>
+    
+		<div class="section" lang="en"><div class="titlepage"><div><div><h3 class="title"><a name="id3358468"></a>9.8.1</h3></div></div></div>
+			
+	    <div class="itemizedlist"><ul type="disc"><li>
+During RFC5011 processing some journal write errors were not detected.
+This could lead to managed-keys changes being committed but not 
+recorded in the journal files, causing potential inconsistencies  
+during later processing.  [RT #20256]
+</li><li>
+A potential NULL pointer deference in the DNS64 code could cause 
+named to terminate unexpectedly. [RT #20256]
+</li><li>
+A state variable relating to DNSSEC could fail to be set during 
+some infrequently-executed code paths, allowing it to be used whilst
+in an unitialized state during cache updates, with unpredictable results.
+[RT #20256]
+</li><li>
+A potential NULL pointer deference in DNSSEC signing code could 
+cause named to terminate unexpectedly  [RT #20256]
+</li><li>
+Several cosmetic code changes were made to silence warnings
+generated by a static code analysis tool. [RT #20256]
+</li><li>
+When using the -x (sign with only KSK) option on dnssec-signzone,
+it could incorrectly count the number of ZSKs in the zone. (And in 9.9.0,
+some code cleanup and improved warning messages). [RT #20852]
+</li><li>
+When using _builtin in named.conf, named.conf changes were not found
+when reloading the config file. Now checks _builtin zone arguments
+to see if the zone is re-usable or not. [RT #21914]
+</li><li>
+Running dnssec-settime -f on an old-style key will
+now force the key to be rewritten to the new key format even if no
+other change has been specified, using "-P now -A now"
+as default values. [RT #22474]
+</li><li>
+After an external code review, a code cleanup was done. [RT #22521]
+</li><li>
+Cause named to terminate at startup or rndc reconfig
+reload to fail, if a log file specified in the
+conf file isn't a plain file. (RT #22771]
+</li><li>
+named now forces the ADB cache time for glue related data to zero  
+instead of relying on TTL.  This corrects problematic behavior in cases  
+where a server was authoritative for the A record of a nameserver for a  
+delegated zone and was queried to recursively resolve records within  
+that zone.  [RT #22842]
+</li><li>
+When a validating resolver got a NODATA response for DNSKEY, it was
+not caching the NODATA. Fixed and test added. [RT #22908]
+</li><li>
+Fixed a bug in which zone keys that were published
+and but not immediately activated, automatic signing could fail to trigger.
+[RT #22911]
+</li><li>
+Fixed precedence order bug with NS and DNAME records if both are present.
+(Also fixed timing of autosign test in 9.7+) [RT #23035]
+</li><li>
+When a DNSSEC signed dynamic zone's signatures need to be refreshed,
+named would first delete the old signatures in the zone. If a private
+key of the same algorithm isn't available to named, the signing would
+fail but the old signatures would already be deleted. named now checks
+if it can access the private key before deleting the old signatures and 
+leaves the old signature if no private key is found. [RT #23136]
+</li><li>
+When using "auto-dnssec maintain" and rolling to a new key, a
+private-type record (only used internally by named) could be created
+and not marked as complete. [RT #23253]
+</li><li>
+Fixed last autosign test report. [RT #23256]
+</li><li>
+named didn't save gid at startup and later assumed gid 0.
+named now saves/restores the gid when creating creating
+named.pid at startup. [RT #23290]
+</li><li>
+If the server has an IPv6 address but does not have IPv6 connectivity
+to the internet, dig +trace could fail attempting to use IPv6
+addresses. [RT #23297]
+</li><li>
+If named is configured with managed zones, the managed key maint timer
+can exercise a race condition that can crash the server.
+[RT #23303]
+</li><li>
+Changing TTL did not cause dnssec-signzone to generate new signatures.
+[RT #23330]
+</li><li>
+Have the validating resolver use RRSIG original TTL to compute
+validated RRset and RRSIG TTL. [RT #23332]
+</li><li>
+In "make test" bin/tests/resolver, hold the socket manager lock
+while freeing the socket.
+[RT #23333]
+</li><li>
+If named encountered a CNAME instead of a DS record when walking
+the chain of trust down from the trust anchor, it incorrectly stopped
+validating. [RT #23338]
+</li><li>
+dns/view.h needed dns/rpz.h but it wasn't in the Makfile.in
+HEADERS variable. [RT #23342]
+</li><li>
+RRSIG records could have time stamps too far in the future.
+[RT #23356]
+</li><li>
+named stores cached data in an in-memory database and keeps track of
+how recently the data is used with a heap. The heap is stored within the
+cache's memory space. Under a sustained high query load and with a small
+cache size, this could lead to the heap exhausting the cache space. This
+would result in cache misses and SERVFAILs, with named never releasing
+the cache memory the heap used up and never recovering.
+
+This fix removes the heap into its own memory space, preventing the heap
+from exhausting the cache space and allowing named to recover gracefully
+when the high query load abates. [RT #23371]
+</li><li>
+Fully separated key management on a per view basis. [RT #23419]
+</li><li>
+If running on a powerpc CPU and with atomic operations enabled,
+named could lock up. Added sync instructions to the end of atomic
+operations. [RT #23469]
+</li><li>
+If OpenSSL was built without engine support, named would have
+compile errors and fail to build.
+[RT #23473]
+</li><li>
+If ./configure finds GOST but not elliptic curve, named fails to
+build. Added elliptic curve support check in GOST OpenSSL engine
+detection. [RT #23485]
+</li><li>
+"rndc secroots" would abort on the first error
+and so could miss remaining views. [RT #23488]
+</li><li>
+Handle isc_event_allocate failures in t_tasks test.
+[RT #23572]
+</li><li>
+ixfr-from-differences {master|slave};
+failed to select the master/slave zones, resulting in on diff/journal
+file being created.
+[RT #23580]
+</li><li>
+If a DNAME substitution failed, named returned NOERROR. The correct
+response should be YXDOMAIN.
+[RT #23591]
+</li><li>
+dns_dnssec_findzonekeys{2} used a inconsistant
+timestamp when determining which keys are active. This could result in
+some RRsets not being signed/re-signed.
+[RT #23642]
+</li><li>
+Remove bin/tests/system/logfileconfig/ns1/named.conf and
+add setup.sh in order to resolve changing named.conf issue. [RT #23687]
+</li><li>
+NOTIFY messages were not being sent when generating
+a NSEC3 chain incrementally. [RT #23702]
+</li><li>
+DDNS updates using SIG(0) with update-policy match
+type "external" could cause a crash. Also fixed nsupdate core
+dump on shutdown when using a SIG(0) key, due to the key
+not being freed. [RT #23735]
+</li><li>
+Zones using automatic key maintenance could fail to check the key
+repository for updates. named now checks once per hour and the
+automatic check bug has been fixed. [RT #23744]
+</li><li>
+named now uses the correct strtok/strtok_r/strtok_s based on OS.
+[RT #23747]
+</li><li>
+Signatures for records at the zone apex could go
+stale due to an incorrect timer setting. [RT #23769]
+</li><li>
+The autosign tests attempted to open ports within reserved ranges. Test
+now avoids those ports.
+[RT #23957]
+</li><li>
+GSS TGIS test was failing, since log_cred() caused KRB5_KTNAME to
+be cached. Now sets KRB5_KTNAME before calling log_cred() in
+dst_gssapi_acceptctx(). [RT #24004]
+</li><li>
+named, acting as authoritative server for DLZ zones, was not correctly
+setting the authoritative (AA) bit.
+[RT #24146]
+</li><li>
+Clean up some cross-compiling issues and added two undocumented
+configure options, --with-gost and --with-rlimtype, to allow over-riding
+default settings (gost=no and rlimtype="long int") when cross-compiling.
+[RT #24367]
+</li><li>
+When trying sign with NSEC3, if dnssec-signzone couldn't find the
+KSK, it would give an incorrect error "NSEC3 iterations too big for
+weakest DNSKEY strength" rather than the correct "failed to find
+keys at the zone apex: not found" [RT #24369]
+</li><li>
+Configuring 'dnssec-validation auto' in a view instead of in the
+options statement could trigger an assertion failure in named-checkconf.
+[RT #24382]
+</li><li>
+Improved consistency checks for dnssec-enable and
+dnssec-validation, added test cases to the
+checkconf system test. [RT #24398]
+</li><li>
+If named is configured to be both authoritative and recursive and receives
+a recursive query for a CNAME in a zone that it is authoritative for, if that
+CNAME also points to a zone the server is authoritative for, the recursive part of name will not follow the CNAME change and the response will not be a
+complete CNAME chain. [RT #24455]
+</li><li>
+nsupdate could dump core on shutdown when using SIG(0) keys. [RT #24604]
+</li><li>
+Named could fail to validate zones list in a DLV that validated insecure
+without using DLV and had DS records in the parent zone. [RT #24631]
+</li><li>
+dnssec-signzone now records timestamps just before and just after signing, improving the accuracy of signing statistics. [RT #16030]
+</li><li>
+If allow-new-zones was set to yes and name-based ACLs were used, named could crash when "rndc reconfig" was issued. [RT #22739]
+</li><li>
+RT #23136 fixed a problem where named would delete old signatures even
+when the private key wasn't available to re-sign the zone, resulting in
+a zone with missing signatures. This fix (CHANGES 3114) did not
+completely fix all issues. [RT #24577]
+</li><li>
+A bug in FreeBSD kernels causes IPv6 UDP responses greater than
+1280 bytes to not fragment as they should. Until there is a kernel
+fix, named will work around this by setting IPV6_USE_MIN_MTU on a
+per packet basis. [RT #24950]
+</li></ul></div>
+		</div>
+  </div>
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3359134"></a>Known issues in this release</h2></div></div></div>
+    
+    <div class="itemizedlist"><ul type="disc"><li>
+        <p>
+          None.
+        </p>
+      </li></ul></div>
+  </div>
+
+  <div class="section" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="id3359152"></a>Thank You</h2></div></div></div>
+    
+    <p>
+      Thank you to everyone who assisted us in making this release possible.
+      If you would like to contribute to ISC to assist us in continuing to make
+      quality open source software, please visit our donations page at
+      <a href="http://www.isc.org/supportisc" target="_top">http://www.isc.org/supportisc</a>.
+    </p>
+  </div>
+</div></body></html>

RELEASE-NOTES-BIND-9.8.1.txt

@@ -0,0 +1,268 @@
+     __________________________________________________________________
+
+Introduction
+
+   BIND 9.8.1 is the current production release of BIND 9.8.
+
+   This document summarizes changes from BIND 9.8.0 to BIND 9.8.1. Please
+   see the CHANGES file in the source code release for a complete list of
+   all changes.
+
+Download
+
+   The latest versions of BIND 9 software can always be found on our web
+   site at http://www.isc.org/downloads/all. There you will find
+   additional information about each release, source code, and some
+   pre-compiled versions for certain operating systems.
+
+Support
+
+   Product support information is available on
+   http://www.isc.org/services/support for paid support options. Free
+   support is provided by our user community via a mailing list.
+   Information on all public email lists is available at
+   https://lists.isc.org/mailman/listinfo.
+
+New Features
+
+9.8.1
+
+     * Added a new include file with function typedefs for the DLZ
+       "dlopen" driver. [RT #23629]
+     * Added a tool able to generate malformed packets to allow testing of
+       how named handles them. [RT #24096]
+     * The root key is now provided in the file bind.keys allowing DNSSEC
+       validation to be switched on at start up by adding
+       "dnssec-validation auto;" to named.conf. If the root key provided
+       has expired, named will log the expiration and validation will not
+       work. More information and the most current copy of bind.keys can
+       be found at http://www.isc.org/bind-keys. *Please note this feature
+       was actually added in 9.8.0 but was not included in the 9.8.0
+       release notes. [RT #21727]
+
+Security Fixes
+
+9.8.1
+
+     * If named is configured with a response policy zone (RPZ) and a
+       query of type RRSIG is received for a name configured for RRset
+       replacement in that RPZ, it will trigger an INSIST and crash the
+       server. RRSIG. [RT #24280]
+     * named, set up to be a caching resolver, is vulnerable to a user
+       querying a domain with very large resource record sets (RRSets)
+       when trying to negatively cache the response. Due to an off-by-one
+       error, caching the response could cause named to crash. [RT #24650]
+       [CVE-2011-1910]
+     * Using Response Policy Zone (RPZ) to query a wildcard CNAME label
+       with QUERY type SIG/RRSIG, it can cause named to crash. Fix is
+       query type independant. [RT #24715]
+     * Using Response Policy Zone (RPZ) with DNAME records and querying
+       the subdomain of that label can cause named to crash. Now logs that
+       DNAME is not supported. [RT #24766]
+     * Change #2912 populated the message section in replies to UPDATE
+       requests, which some Windows clients wanted. This exposed a latent
+       bug that allowed the response message to crash named. With this
+       fix, change 2912 has been reduced to copy only the zone section to
+       the reply. A more complete fix for the latent bug will be released
+       later. [RT #24777]
+
+Feature Changes
+
+9.8.1
+
+     * Merged in the NetBSD ATF test framework (currently version 0.12)
+       for development of future unit tests. Use configure --with-atf to
+       build ATF internally or configure --with-atf=prefix to use an
+       external copy. [RT #23209]
+     * Added more verbose error reporting from DLZ LDAP. [RT #23402]
+     * The DLZ "dlopen" driver is now built by default, no longer
+       requiring a configure option. To disable it, use "configure
+       --without-dlopen". (Note: driver not supported on win32.) [RT
+       #23467]
+     * Replaced compile time constant with STDTIME_ON_32BITS. [RT #23587]
+     * Make --with-gssapi default for ./configure. [RT #23738]
+     * Improved the startup time for an authoritative server with a large
+       number of zones by making the zone task table of variable size
+       rather than fixed size. This means that authoritative servers with
+       lots of zones will be serving that zone data much sooner. [RT
+       #24406]
+     * Per RFC 6303, RFC 1918 reverse zones are now part of the built-in
+       list of empty zones. [RT #24990]
+
+Bug Fixes
+
+9.8.1
+
+     * During RFC5011 processing some journal write errors were not
+       detected. This could lead to managed-keys changes being committed
+       but not recorded in the journal files, causing potential
+       inconsistencies during later processing. [RT #20256]
+     * A potential NULL pointer deference in the DNS64 code could cause
+       named to terminate unexpectedly. [RT #20256]
+     * A state variable relating to DNSSEC could fail to be set during
+       some infrequently-executed code paths, allowing it to be used
+       whilst in an unitialized state during cache updates, with
+       unpredictable results. [RT #20256]
+     * A potential NULL pointer deference in DNSSEC signing code could
+       cause named to terminate unexpectedly [RT #20256]
+     * Several cosmetic code changes were made to silence warnings
+       generated by a static code analysis tool. [RT #20256]
+     * When using the -x (sign with only KSK) option on dnssec-signzone,
+       it could incorrectly count the number of ZSKs in the zone. (And in
+       9.9.0, some code cleanup and improved warning messages). [RT
+       #20852]
+     * When using _builtin in named.conf, named.conf changes were not
+       found when reloading the config file. Now checks _builtin zone
+       arguments to see if the zone is re-usable or not. [RT #21914]
+     * Running dnssec-settime -f on an old-style key will now force the
+       key to be rewritten to the new key format even if no other change
+       has been specified, using "-P now -A now" as default values. [RT
+       #22474]
+     * After an external code review, a code cleanup was done. [RT #22521]
+     * Cause named to terminate at startup or rndc reconfig reload to
+       fail, if a log file specified in the conf file isn't a plain file.
+       (RT #22771]
+     * named now forces the ADB cache time for glue related data to zero
+       instead of relying on TTL. This corrects problematic behavior in
+       cases where a server was authoritative for the A record of a
+       nameserver for a delegated zone and was queried to recursively
+       resolve records within that zone. [RT #22842]
+     * When a validating resolver got a NODATA response for DNSKEY, it was
+       not caching the NODATA. Fixed and test added. [RT #22908]
+     * Fixed a bug in which zone keys that were published and but not
+       immediately activated, automatic signing could fail to trigger. [RT
+       #22911]
+     * Fixed precedence order bug with NS and DNAME records if both are
+       present. (Also fixed timing of autosign test in 9.7+) [RT #23035]
+     * When a DNSSEC signed dynamic zone's signatures need to be
+       refreshed, named would first delete the old signatures in the zone.
+       If a private key of the same algorithm isn't available to named,
+       the signing would fail but the old signatures would already be
+       deleted. named now checks if it can access the private key before
+       deleting the old signatures and leaves the old signature if no
+       private key is found. [RT #23136]
+     * When using "auto-dnssec maintain" and rolling to a new key, a
+       private-type record (only used internally by named) could be
+       created and not marked as complete. [RT #23253]
+     * Fixed last autosign test report. [RT #23256]
+     * named didn't save gid at startup and later assumed gid 0. named now
+       saves/restores the gid when creating creating named.pid at startup.
+       [RT #23290]
+     * If the server has an IPv6 address but does not have IPv6
+       connectivity to the internet, dig +trace could fail attempting to
+       use IPv6 addresses. [RT #23297]
+     * If named is configured with managed zones, the managed key maint
+       timer can exercise a race condition that can crash the server. [RT
+       #23303]
+     * Changing TTL did not cause dnssec-signzone to generate new
+       signatures. [RT #23330]
+     * Have the validating resolver use RRSIG original TTL to compute
+       validated RRset and RRSIG TTL. [RT #23332]
+     * In "make test" bin/tests/resolver, hold the socket manager lock
+       while freeing the socket. [RT #23333]
+     * If named encountered a CNAME instead of a DS record when walking
+       the chain of trust down from the trust anchor, it incorrectly
+       stopped validating. [RT #23338]
+     * dns/view.h needed dns/rpz.h but it wasn't in the Makfile.in HEADERS
+       variable. [RT #23342]
+     * RRSIG records could have time stamps too far in the future. [RT
+       #23356]
+     * named stores cached data in an in-memory database and keeps track
+       of how recently the data is used with a heap. The heap is stored
+       within the cache's memory space. Under a sustained high query load
+       and with a small cache size, this could lead to the heap exhausting
+       the cache space. This would result in cache misses and SERVFAILs,
+       with named never releasing the cache memory the heap used up and
+       never recovering. This fix removes the heap into its own memory
+       space, preventing the heap from exhausting the cache space and
+       allowing named to recover gracefully when the high query load
+       abates. [RT #23371]
+     * Fully separated key management on a per view basis. [RT #23419]
+     * If running on a powerpc CPU and with atomic operations enabled,
+       named could lock up. Added sync instructions to the end of atomic
+       operations. [RT #23469]
+     * If OpenSSL was built without engine support, named would have
+       compile errors and fail to build. [RT #23473]
+     * If ./configure finds GOST but not elliptic curve, named fails to
+       build. Added elliptic curve support check in GOST OpenSSL engine
+       detection. [RT #23485]
+     * "rndc secroots" would abort on the first error and so could miss
+       remaining views. [RT #23488]
+     * Handle isc_event_allocate failures in t_tasks test. [RT #23572]
+     * ixfr-from-differences {master|slave}; failed to select the
+       master/slave zones, resulting in on diff/journal file being
+       created. [RT #23580]
+     * If a DNAME substitution failed, named returned NOERROR. The correct
+       response should be YXDOMAIN. [RT #23591]
+     * dns_dnssec_findzonekeys{2} used a inconsistant timestamp when
+       determining which keys are active. This could result in some RRsets
+       not being signed/re-signed. [RT #23642]
+     * Remove bin/tests/system/logfileconfig/ns1/named.conf and add
+       setup.sh in order to resolve changing named.conf issue. [RT #23687]
+     * NOTIFY messages were not being sent when generating a NSEC3 chain
+       incrementally. [RT #23702]
+     * DDNS updates using SIG(0) with update-policy match type "external"
+       could cause a crash. Also fixed nsupdate core dump on shutdown when
+       using a SIG(0) key, due to the key not being freed. [RT #23735]
+     * Zones using automatic key maintenance could fail to check the key
+       repository for updates. named now checks once per hour and the
+       automatic check bug has been fixed. [RT #23744]
+     * named now uses the correct strtok/strtok_r/strtok_s based on OS.
+       [RT #23747]
+     * Signatures for records at the zone apex could go stale due to an
+       incorrect timer setting. [RT #23769]
+     * The autosign tests attempted to open ports within reserved ranges.
+       Test now avoids those ports. [RT #23957]
+     * GSS TGIS test was failing, since log_cred() caused KRB5_KTNAME to
+       be cached. Now sets KRB5_KTNAME before calling log_cred() in
+       dst_gssapi_acceptctx(). [RT #24004]
+     * named, acting as authoritative server for DLZ zones, was not
+       correctly setting the authoritative (AA) bit. [RT #24146]
+     * Clean up some cross-compiling issues and added two undocumented
+       configure options, --with-gost and --with-rlimtype, to allow
+       over-riding default settings (gost=no and rlimtype="long int") when
+       cross-compiling. [RT #24367]
+     * When trying sign with NSEC3, if dnssec-signzone couldn't find the
+       KSK, it would give an incorrect error "NSEC3 iterations too big for
+       weakest DNSKEY strength" rather than the correct "failed to find
+       keys at the zone apex: not found" [RT #24369]
+     * Configuring 'dnssec-validation auto' in a view instead of in the
+       options statement could trigger an assertion failure in
+       named-checkconf. [RT #24382]
+     * Improved consistency checks for dnssec-enable and
+       dnssec-validation, added test cases to the checkconf system test.
+       [RT #24398]
+     * If named is configured to be both authoritative and recursive and
+       receives a recursive query for a CNAME in a zone that it is
+       authoritative for, if that CNAME also points to a zone the server
+       is authoritative for, the recursive part of name will not follow
+       the CNAME change and the response will not be a complete CNAME
+       chain. [RT #24455]
+     * nsupdate could dump core on shutdown when using SIG(0) keys. [RT
+       #24604]
+     * Named could fail to validate zones list in a DLV that validated
+       insecure without using DLV and had DS records in the parent zone.
+       [RT #24631]
+     * dnssec-signzone now records timestamps just before and just after
+       signing, improving the accuracy of signing statistics. [RT #16030]
+     * If allow-new-zones was set to yes and name-based ACLs were used,
+       named could crash when "rndc reconfig" was issued. [RT #22739]
+     * RT #23136 fixed a problem where named would delete old signatures
+       even when the private key wasn't available to re-sign the zone,
+       resulting in a zone with missing signatures. This fix (CHANGES
+       3114) did not completely fix all issues. [RT #24577]
+     * A bug in FreeBSD kernels causes IPv6 UDP responses greater than
+       1280 bytes to not fragment as they should. Until there is a kernel
+       fix, named will work around this by setting IPV6_USE_MIN_MTU on a
+       per packet basis. [RT #24950]
+
+Known issues in this release
+
+     * None.
+
+Thank You
+
+   Thank you to everyone who assisted us in making this release possible.
+   If you would like to contribute to ISC to assist us in continuing to
+   make quality open source software, please visit our donations page at
+   http://www.isc.org/supportisc.

acconfig.h

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004, 2005, 2007, 2008  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2003  Internet Software Consortium.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,6 +15,8 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
+/* $Id: acconfig.h,v 1.53 2008/12/01 23:47:44 tbox Exp $ */
+
 /*! \file */
 
 /***
@@ -67,6 +70,9 @@
 /** define if gai_strerror() exists */
 #undef HAVE_GAISTRERROR
 
+/** define if arc4random() exists */
+#undef HAVE_ARC4RANDOM
+
 /**
  * define if pthread_setconcurrency() should be called to tell the
  * OS how many threads we might want to run.
@@ -126,17 +132,14 @@ int sigwait(const unsigned int *set, int *sig);
 /** define if you have strerror in the C library. */
 #undef HAVE_STRERROR
 
+/** Define if you are running under Compaq TruCluster. */
+#undef HAVE_TRUCLUSTER
+
 /* Define if OpenSSL includes DSA support */
 #undef HAVE_OPENSSL_DSA
 
-/* Define if you have getpassphrase in the C library. */
-#undef HAVE_GETPASSPHRASE
-
 /* Define to the length type used by the socket API (socklen_t, size_t, int). */
 #undef ISC_SOCKADDR_LEN_T
 
 /* Define if threads need PTHREAD_SCOPE_SYSTEM */
 #undef NEED_PTHREAD_SCOPE_SYSTEM
-
-/* Define to 1 if you have the uname library function. */
-#undef HAVE_UNAME

aclocal.m4

@@ -1,17 +1,2 @@
-sinclude(libtool.m4/libtool.m4)dnl
-sinclude(libtool.m4/ltoptions.m4)dnl
-sinclude(libtool.m4/ltsugar.m4)dnl
-sinclude(libtool.m4/ltversion.m4)dnl
-sinclude(libtool.m4/lt~obsolete.m4)dnl
+sinclude(./libtool.m4)dnl
 
-m4_divert_text(HELP_CANON, [[
-  NOTE: If PREFIX is not set, then the default values for --sysconfdir
-  and --localstatedir are /etc and /var, respectively.]])
-m4_divert_text(HELP_END, [[
-Professional support for BIND is provided by Internet Systems Consortium,
-Inc.  Information about paid support and training options is available at
-https://www.isc.org/support.
-
-Help can also often be found on the BIND Users mailing list
-(https://lists.isc.org/mailman/listinfo/bind-users) or in the #bind
-channel of the Freenode IRC service.]])

bin/Makefile.in

@@ -1,4 +1,5 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004, 2007, 2009  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 1998-2001  Internet Software Consortium.
 #
 # Permission to use, copy, modify, and/or distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
@@ -12,12 +13,14 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 
+# $Id: Makefile.in,v 1.29 2009/10/05 12:07:08 fdupont Exp $
+
 srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-SUBDIRS =	named rndc dig delv dnssec tools nsupdate \
-		check confgen @PYTHON_TOOLS@ @PKCS11_TOOLS@ tests
+SUBDIRS =	named rndc dig dnssec tests tools nsupdate \
+		check confgen @PKCS11_TOOLS@
 TARGETS =
 
 @BIND9_MAKE_RULES@

bin/check/.cvsignore

@@ -0,0 +1,6 @@
+Makefile
+.libs
+*.la
+*.lo
+named-checkconf
+named-checkzone

bin/check/.gitignore

@@ -1,3 +0,0 @@
-.libs
-named-checkconf
-named-checkzone

bin/check/Makefile.in

@@ -1,4 +1,5 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2004-2007, 2009  Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2000-2003  Internet Software Consortium.
 #
 # Permission to use, copy, modify, and/or distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
@@ -18,14 +19,14 @@ srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
 @BIND9_MAKE_INCLUDES@
 
 CINCLUDES =	${BIND9_INCLUDES} ${DNS_INCLUDES} ${ISCCFG_INCLUDES} \
-		${ISC_INCLUDES} @DST_OPENSSL_INC@
+		${ISC_INCLUDES}
 
-CDEFINES = 	@CRYPTO@ -DNAMED_CONFFILE=\"${sysconfdir}/named.conf\"
+CDEFINES = 	-DNAMED_CONFFILE=\"${sysconfdir}/named.conf\"
 CWARNINGS =
 
 DNSLIBS =	../../lib/dns/libdns.@A@ @DNS_CRYPTO_LIBS@
@@ -69,7 +70,7 @@ named-checkzone.@O@: named-checkzone.c
 		-c ${srcdir}/named-checkzone.c
 
 named-checkconf@EXEEXT@: named-checkconf.@O@ check-tool.@O@ ${ISCDEPLIBS} \
-		${DNSDEPLIBS} ${ISCCFGDEPLIBS} ${BIND9DEPLIBS}
+		${ISCCFGDEPLIBS} ${BIND9DEPLIBS}
 	export BASEOBJS="named-checkconf.@O@ check-tool.@O@"; \
 	export LIBS0="${BIND9LIBS} ${ISCCFGLIBS} ${DNSLIBS}"; \
 	${FINALBUILDCMD}
@@ -95,12 +96,5 @@ install:: named-checkconf@EXEEXT@ named-checkzone@EXEEXT@ installdirs
 	for m in ${MANPAGES}; do ${INSTALL_DATA} ${srcdir}/$$m ${DESTDIR}${mandir}/man8; done
 	(cd ${DESTDIR}${mandir}/man8; rm -f named-compilezone.8; ${LINK_PROGRAM} named-checkzone.8 named-compilezone.8)
 
-uninstall::
-	rm -f ${DESTDIR}${mandir}/man8/named-compilezone.8
-	for m in ${MANPAGES}; do rm -f ${DESTDIR}${mandir}/man8/$$m ; done
-	rm -f ${DESTDIR}${sbindir}/named-compilezone@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkconf@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/named-checkzone@EXEEXT@
-
 clean distclean::
 	rm -f ${TARGETS} r1.htm

bin/check/check-tool.c

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2000-2002  Internet Software Consortium.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,7 +15,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: check-tool.c,v 1.44 2011/12/22 07:32:39 each Exp $ */
+/* $Id: check-tool.c,v 1.41 2010/09/07 23:46:59 tbox Exp $ */
 
 /*! \file */
 
@@ -32,7 +33,6 @@
 #include <isc/mem.h>
 #include <isc/netdb.h>
 #include <isc/net.h>
-#include <isc/print.h>
 #include <isc/region.h>
 #include <isc/stdio.h>
 #include <isc/string.h>
@@ -40,17 +40,12 @@
 #include <isc/types.h>
 #include <isc/util.h>
 
-#include <dns/db.h>
-#include <dns/dbiterator.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
 #include <dns/name.h>
 #include <dns/rdata.h>
 #include <dns/rdataclass.h>
 #include <dns/rdataset.h>
-#include <dns/rdatasetiter.h>
-#include <dns/rdatatype.h>
-#include <dns/result.h>
 #include <dns/types.h>
 #include <dns/zone.h>
 
@@ -91,7 +86,6 @@
 static const char *dbtype[] = { "rbt" };
 
 int debug = 0;
-const char *journal = NULL;
 isc_boolean_t nomerge = ISC_TRUE;
 #if CHECK_LOCAL
 isc_boolean_t docheckmx = ISC_TRUE;
@@ -113,7 +107,6 @@ unsigned int zone_options = DNS_ZONEOPT_CHECKNS |
 			    DNS_ZONEOPT_CHECKWILDCARD |
 			    DNS_ZONEOPT_WARNMXCNAME |
 			    DNS_ZONEOPT_WARNSRVCNAME;
-unsigned int zone_options2 = 0;
 
 /*
  * This needs to match the list in bin/named/log.c.
@@ -127,7 +120,6 @@ static isc_logcategory_t categories[] = {
 	{ "unmatched", 	     0 },
 	{ "update-security", 0 },
 	{ "query-errors",    0 },
-	{ "trust-anchor-telemetry",    0 },
 	{ NULL,		     0 }
 };
 
@@ -204,10 +196,6 @@ checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
 		a->type == dns_rdatatype_a);
 	REQUIRE(aaaa == NULL || !dns_rdataset_isassociated(aaaa) ||
 		aaaa->type == dns_rdatatype_aaaa);
-
-	if (a == NULL || aaaa == NULL)
-		return (answer);
-
 	memset(&hints, 0, sizeof(hints));
 	hints.ai_flags = AI_CANONNAME;
 	hints.ai_family = PF_UNSPEC;
@@ -218,9 +206,8 @@ checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
 	/*
 	 * Turn off search.
 	 */
-	if (dns_name_countlabels(name) > 1U) {
-		strlcat(namebuf, ".", sizeof(namebuf));
-	}
+	if (dns_name_countlabels(name) > 1U)
+		strcat(namebuf, ".");
 	dns_name_format(owner, ownerbuf, sizeof(ownerbuf));
 
 	result = getaddrinfo(namebuf, NULL, &hints, &ai);
@@ -271,7 +258,8 @@ checkns(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner,
 		}
 		return (ISC_TRUE);
 	}
-
+	if (a == NULL || aaaa == NULL)
+		return (answer);
 	/*
 	 * Check that all glue records really exist.
 	 */
@@ -408,9 +396,8 @@ checkmx(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner) {
 	/*
 	 * Turn off search.
 	 */
-	if (dns_name_countlabels(name) > 1U) {
-		strlcat(namebuf, ".", sizeof(namebuf));
-	}
+	if (dns_name_countlabels(name) > 1U)
+		strcat(namebuf, ".");
 	dns_name_format(owner, ownerbuf, sizeof(ownerbuf));
 
 	result = getaddrinfo(namebuf, NULL, &hints, &ai);
@@ -494,9 +481,8 @@ checksrv(dns_zone_t *zone, dns_name_t *name, dns_name_t *owner) {
 	/*
 	 * Turn off search.
 	 */
-	if (dns_name_countlabels(name) > 1U) {
-		strlcat(namebuf, ".", sizeof(namebuf));
-	}
+	if (dns_name_countlabels(name) > 1U)
+		strcat(namebuf, ".");
 	dns_name_format(owner, ownerbuf, sizeof(ownerbuf));
 
 	result = getaddrinfo(namebuf, NULL, &hints, &ai);
@@ -587,93 +573,11 @@ setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp) {
 	return (ISC_R_SUCCESS);
 }
 
-/*% scan the zone for oversize TTLs */
-static isc_result_t
-check_ttls(dns_zone_t *zone, dns_ttl_t maxttl) {
-	isc_result_t result;
-	dns_db_t *db = NULL;
-	dns_dbversion_t *version = NULL;
-	dns_dbnode_t *node = NULL;
-	dns_dbiterator_t *dbiter = NULL;
-	dns_rdatasetiter_t *rdsiter = NULL;
-	dns_rdataset_t rdataset;
-	dns_fixedname_t fname;
-	dns_name_t *name;
-	dns_fixedname_init(&fname);
-	name = dns_fixedname_name(&fname);
-	dns_rdataset_init(&rdataset);
-
-	CHECK(dns_zone_getdb(zone, &db));
-	INSIST(db != NULL);
-
-	CHECK(dns_db_newversion(db, &version));
-	CHECK(dns_db_createiterator(db, 0, &dbiter));
-
-	for (result = dns_dbiterator_first(dbiter);
-	     result == ISC_R_SUCCESS;
-	     result = dns_dbiterator_next(dbiter)) {
-		result = dns_dbiterator_current(dbiter, &node, name);
-		if (result == DNS_R_NEWORIGIN)
-			result = ISC_R_SUCCESS;
-		CHECK(result);
-
-		CHECK(dns_db_allrdatasets(db, node, version, 0, &rdsiter));
-		for (result = dns_rdatasetiter_first(rdsiter);
-		     result == ISC_R_SUCCESS;
-		     result = dns_rdatasetiter_next(rdsiter)) {
-			dns_rdatasetiter_current(rdsiter, &rdataset);
-			if (rdataset.ttl > maxttl) {
-				char nbuf[DNS_NAME_FORMATSIZE];
-				char tbuf[255];
-				isc_buffer_t b;
-				isc_region_t r;
-
-				dns_name_format(name, nbuf, sizeof(nbuf));
-				isc_buffer_init(&b, tbuf, sizeof(tbuf) - 1);
-				CHECK(dns_rdatatype_totext(rdataset.type, &b));
-				isc_buffer_usedregion(&b, &r);
-				r.base[r.length] = 0;
-
-				dns_zone_log(zone, ISC_LOG_ERROR,
-					     "%s/%s TTL %d exceeds "
-					     "maximum TTL %d",
-					     nbuf, tbuf, rdataset.ttl, maxttl);
-				dns_rdataset_disassociate(&rdataset);
-				CHECK(ISC_R_RANGE);
-			}
-			dns_rdataset_disassociate(&rdataset);
-		}
-		if (result == ISC_R_NOMORE)
-			result = ISC_R_SUCCESS;
-		CHECK(result);
-
-		dns_rdatasetiter_destroy(&rdsiter);
-		dns_db_detachnode(db, &node);
-	}
-
-	if (result == ISC_R_NOMORE)
-		result = ISC_R_SUCCESS;
-
- cleanup:
-	if (node != NULL)
-		dns_db_detachnode(db, &node);
-	if (rdsiter != NULL)
-		dns_rdatasetiter_destroy(&rdsiter);
-	if (dbiter != NULL)
-		dns_dbiterator_destroy(&dbiter);
-	if (version != NULL)
-		dns_db_closeversion(db, &version, ISC_FALSE);
-	if (db != NULL)
-		dns_db_detach(&db);
-
-	return (result);
-}
-
 /*% load the zone */
 isc_result_t
 load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	  dns_masterformat_t fileformat, const char *classname,
-	  dns_ttl_t maxttl, dns_zone_t **zonep)
+	  dns_zone_t **zonep)
 {
 	isc_result_t result;
 	dns_rdataclass_t rdclass;
@@ -693,7 +597,7 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 
 	dns_zone_settype(zone, dns_zone_master);
 
-	isc_buffer_constinit(&buffer, zonename, strlen(zonename));
+	isc_buffer_init(&buffer, zonename, strlen(zonename));
 	isc_buffer_add(&buffer, strlen(zonename));
 	dns_fixedname_init(&fixorigin);
 	origin = dns_fixedname_name(&fixorigin);
@@ -701,8 +605,6 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	CHECK(dns_zone_setorigin(zone, origin));
 	CHECK(dns_zone_setdbtype(zone, 1, (const char * const *) dbtype));
 	CHECK(dns_zone_setfile2(zone, filename, fileformat));
-	if (journal != NULL)
-		CHECK(dns_zone_setjournal(zone, journal));
 
 	DE_CONST(classname, region.base);
 	region.length = strlen(classname);
@@ -710,11 +612,7 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 
 	dns_zone_setclass(zone, rdclass);
 	dns_zone_setoption(zone, zone_options, ISC_TRUE);
-	dns_zone_setoption2(zone, zone_options2, ISC_TRUE);
 	dns_zone_setoption(zone, DNS_ZONEOPT_NOMERGE, nomerge);
-
-	dns_zone_setmaxttl(zone, maxttl);
-
 	if (docheckmx)
 		dns_zone_setcheckmx(zone, checkmx);
 	if (docheckns)
@@ -723,15 +621,6 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 		dns_zone_setchecksrv(zone, checksrv);
 
 	CHECK(dns_zone_load(zone));
-
-	/*
-	 * When loading map files we can't catch oversize TTLs during
-	 * load, so we check for them here.
-	 */
-	if (fileformat == dns_masterformat_map && maxttl != 0) {
-		CHECK(check_ttls(zone, maxttl));
-	}
-
 	if (zonep != NULL) {
 		*zonep = zone;
 		zone = NULL;
@@ -746,14 +635,10 @@ load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 /*% dump the zone */
 isc_result_t
 dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
-	  dns_masterformat_t fileformat, const dns_master_style_t *style,
-	  const isc_uint32_t rawversion)
+	  dns_masterformat_t fileformat, const dns_master_style_t *style)
 {
 	isc_result_t result;
 	FILE *output = stdout;
-	const char *flags;
-
-	flags = (fileformat == dns_masterformat_text) ? "w+" : "wb+";
 
 	if (debug) {
 		if (filename != NULL && strcmp(filename, "-") != 0)
@@ -764,7 +649,7 @@ dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
 	}
 
 	if (filename != NULL && strcmp(filename, "-") != 0) {
-		result = isc_stdio_open(filename, flags, &output);
+		result = isc_stdio_open(filename, "w+", &output);
 
 		if (result != ISC_R_SUCCESS) {
 			fprintf(stderr, "could not open output "
@@ -773,8 +658,8 @@ dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
 		}
 	}
 
-	result = dns_zone_dumptostream3(zone, output, fileformat, style,
-					rawversion);
+	result = dns_zone_dumptostream2(zone, output, fileformat, style);
+
 	if (output != stdout)
 		(void)isc_stdio_close(output);
 

bin/check/check-tool.h

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004, 2005, 2007, 2010  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2000-2002  Internet Software Consortium.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,7 +15,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: check-tool.h,v 1.18 2011/12/09 23:47:02 tbox Exp $ */
+/* $Id: check-tool.h,v 1.16 2010/09/07 23:46:59 tbox Exp $ */
 
 #ifndef CHECK_TOOL_H
 #define CHECK_TOOL_H
@@ -36,12 +37,11 @@ setup_logging(isc_mem_t *mctx, FILE *errout, isc_log_t **logp);
 isc_result_t
 load_zone(isc_mem_t *mctx, const char *zonename, const char *filename,
 	  dns_masterformat_t fileformat, const char *classname,
-	  dns_ttl_t maxttl, dns_zone_t **zonep);
+	  dns_zone_t **zonep);
 
 isc_result_t
 dump_zone(const char *zonename, dns_zone_t *zone, const char *filename,
-	  dns_masterformat_t fileformat, const dns_master_style_t *style,
-	  const isc_uint32_t rawversion);
+	  dns_masterformat_t fileformat, const dns_master_style_t *style);
 
 #ifdef _WIN32
 void InitSockets(void);
@@ -49,13 +49,11 @@ void DestroySockets(void);
 #endif
 
 extern int debug;
-extern const char *journal;
 extern isc_boolean_t nomerge;
 extern isc_boolean_t docheckmx;
 extern isc_boolean_t docheckns;
 extern isc_boolean_t dochecksrv;
 extern unsigned int zone_options;
-extern unsigned int zone_options2;
 
 ISC_LANG_ENDDECLS
 

bin/check/named-checkconf.8

@@ -1,4 +1,5 @@
-.\" Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2000-2002 Internet Software Consortium.
 .\" 
 .\" Permission to use, copy, modify, and/or distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
@@ -12,132 +13,107 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
+.\" $Id: named-checkconf.8,v 1.33 2009/12/29 01:14:03 tbox Exp $
+.\"
 .hy 0
 .ad l
-'\" t
-.\"     Title: named-checkconf
+.\"     Title: named\-checkconf
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-01-10
+.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
+.\"      Date: June 14, 2000
 .\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\"    Source: BIND9
 .\"
-.TH "NAMED\-CHECKCONF" "8" "2014\-01\-10" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
+.TH "NAMED\-CHECKCONF" "8" "June 14, 2000" "BIND9" "BIND9"
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
 .SH "NAME"
-named-checkconf \- named configuration file syntax checking tool
+named\-checkconf \- named configuration file syntax checking tool
 .SH "SYNOPSIS"
-.HP \w'\fBnamed\-checkconf\fR\ 'u
-\fBnamed\-checkconf\fR [\fB\-hjvz\fR] [\fB\-p\fR\ [\fB\-x\fR\ ]] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] {filename}
+.HP 16
+\fBnamed\-checkconf\fR [\fB\-h\fR] [\fB\-v\fR] [\fB\-j\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] {filename} [\fB\-p\fR] [\fB\-z\fR]
 .SH "DESCRIPTION"
 .PP
 \fBnamed\-checkconf\fR
 checks the syntax, but not the semantics, of a
 \fBnamed\fR
-configuration file\&. The file is parsed and checked for syntax errors, along with all files included by it\&. If no file is specified,
-/etc/named\&.conf
-is read by default\&.
+configuration file. The file is parsed and checked for syntax errors, along with all files included by it. If no file is specified,
+\fI/etc/named.conf\fR
+is read by default.
 .PP
 Note: files that
 \fBnamed\fR
 reads in separate parser contexts, such as
-rndc\&.key
+\fIrndc.key\fR
 and
-bind\&.keys, are not automatically read by
-\fBnamed\-checkconf\fR\&. Configuration errors in these files may cause
+\fIbind.keys\fR, are not automatically read by
+\fBnamed\-checkconf\fR. Configuration errors in these files may cause
 \fBnamed\fR
 to fail to run, even if
 \fBnamed\-checkconf\fR
-was successful\&.
+was successful.
 \fBnamed\-checkconf\fR
-can be run on these files explicitly, however\&.
+can be run on these files explicitly, however.
 .SH "OPTIONS"
 .PP
 \-h
 .RS 4
-Print the usage summary and exit\&.
-.RE
-.PP
-\-j
-.RS 4
-When loading a zonefile read the journal if it exists\&.
-.RE
-.PP
-\-p
-.RS 4
-Print out the
-named\&.conf
-and included files in canonical form if no errors were detected\&. See also the
-\fB\-x\fR
-option\&.
+Print the usage summary and exit.
 .RE
 .PP
 \-t \fIdirectory\fR
 .RS 4
 Chroot to
-directory
-so that include directives in the configuration file are processed as if run by a similarly chrooted
-\fBnamed\fR\&.
+\fIdirectory\fR
+so that include directives in the configuration file are processed as if run by a similarly chrooted named.
 .RE
 .PP
 \-v
 .RS 4
 Print the version of the
 \fBnamed\-checkconf\fR
-program and exit\&.
+program and exit.
 .RE
 .PP
-\-x
+\-p
 .RS 4
-When printing the configuration files in canonical form, obscure shared secrets by replacing them with strings of question marks (\*(Aq?\*(Aq)\&. This allows the contents of
-named\&.conf
-and related files to be shared \(em for example, when submitting bug reports \(em without compromising private data\&. This option cannot be used without
-\fB\-p\fR\&.
+Print out the
+\fInamed.conf\fR
+and included files in canonical form if no errors were detected.
 .RE
 .PP
 \-z
 .RS 4
 Perform a test load of all master zones found in
-named\&.conf\&.
+\fInamed.conf\fR.
+.RE
+.PP
+\-j
+.RS 4
+When loading a zonefile read the journal if it exists.
 .RE
 .PP
 filename
 .RS 4
-The name of the configuration file to be checked\&. If not specified, it defaults to
-/etc/named\&.conf\&.
+The name of the configuration file to be checked. If not specified, it defaults to
+\fI/etc/named.conf\fR.
 .RE
 .SH "RETURN VALUES"
 .PP
 \fBnamed\-checkconf\fR
-returns an exit status of 1 if errors were detected and 0 otherwise\&.
+returns an exit status of 1 if errors were detected and 0 otherwise.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed-checkzone\fR(8),
-BIND 9 Administrator Reference Manual\&.
+\fBnamed\-checkzone\fR(8),
+BIND 9 Administrator Reference Manual.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
+Internet Systems Consortium
 .SH "COPYRIGHT"
+Copyright \(co 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2000-2002, 2004, 2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+Copyright \(co 2000\-2002 Internet Software Consortium.
 .br

bin/check/named-checkconf.c

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004-2007, 2009-2011  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2002  Internet Software Consortium.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,7 +15,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: named-checkconf.c,v 1.56 2011/03/12 04:59:46 tbox Exp $ */
+/* $Id: named-checkconf.c,v 1.54.62.2 2011/03/12 04:59:13 tbox Exp $ */
 
 /*! \file */
 
@@ -30,7 +31,6 @@
 #include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
-#include <isc/print.h>
 #include <isc/result.h>
 #include <isc/string.h>
 #include <isc/util.h>
@@ -39,13 +39,10 @@
 
 #include <bind9/check.h>
 
-#include <dns/db.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
 #include <dns/name.h>
-#include <dns/rdataclass.h>
 #include <dns/result.h>
-#include <dns/rootns.h>
 #include <dns/zone.h>
 
 #include "check-tool.h"
@@ -67,7 +64,7 @@ usage(void) ISC_PLATFORM_NORETURN_POST;
 
 static void
 usage(void) {
-	fprintf(stderr, "usage: %s [-hjvz] [-p [-x]] [-t directory] "
+	fprintf(stderr, "usage: %s [-h] [-j] [-p] [-v] [-z] [-t directory] "
 		"[named.conf]\n", program);
 	exit(1);
 }
@@ -143,27 +140,15 @@ get_checknames(const cfg_obj_t **maps, const cfg_obj_t **obj) {
 }
 
 static isc_result_t
-configure_hint(const char *zfile, const char *zclass, isc_mem_t *mctx) {
-	isc_result_t result;
-	dns_db_t *db = NULL;
-	dns_rdataclass_t rdclass;
-	isc_textregion_t r;
+config_get(const cfg_obj_t **maps, const char *name, const cfg_obj_t **obj) {
+	int i;
 
-	if (zfile == NULL)
-		return (ISC_R_FAILURE);
-
-	DE_CONST(zclass, r.base);
-	r.length = strlen(zclass);
-	result = dns_rdataclass_fromtext(&rdclass, &r);
-	if (result != ISC_R_SUCCESS)
-		return (result);
-
-	result = dns_rootns_create(mctx, rdclass, zfile, &db);
-	if (result != ISC_R_SUCCESS)
-		return (result);
-
-	dns_db_detach(&db);
-	return (ISC_R_SUCCESS);
+	for (i = 0;; i++) {
+		if (maps[i] == NULL)
+			return (ISC_R_NOTFOUND);
+		if (cfg_map_get(maps[i], name, obj) == ISC_R_SUCCESS)
+			return (ISC_R_SUCCESS);
+	}
 }
 
 /*% configure the zone */
@@ -176,20 +161,16 @@ configure_zone(const char *vclass, const char *view,
 	isc_result_t result;
 	const char *zclass;
 	const char *zname;
-	const char *zfile = NULL;
+	const char *zfile;
 	const cfg_obj_t *maps[4];
-	const cfg_obj_t *mastersobj = NULL;
-	const cfg_obj_t *inviewobj = NULL;
 	const cfg_obj_t *zoptions = NULL;
 	const cfg_obj_t *classobj = NULL;
 	const cfg_obj_t *typeobj = NULL;
 	const cfg_obj_t *fileobj = NULL;
-	const cfg_obj_t *dlzobj = NULL;
 	const cfg_obj_t *dbobj = NULL;
 	const cfg_obj_t *obj = NULL;
 	const cfg_obj_t *fmtobj = NULL;
 	dns_masterformat_t masterformat;
-	dns_ttl_t maxttl = 0;
 
 	zone_options = DNS_ZONEOPT_CHECKNS | DNS_ZONEOPT_MANYERRORS;
 
@@ -211,53 +192,18 @@ configure_zone(const char *vclass, const char *view,
 	}
 	maps[i] = NULL;
 
-	cfg_map_get(zoptions, "in-view", &inviewobj);
-	if (inviewobj != NULL)
-		return (ISC_R_SUCCESS);
-
 	cfg_map_get(zoptions, "type", &typeobj);
 	if (typeobj == NULL)
 		return (ISC_R_FAILURE);
-
-	/*
-	 * Skip checks when using an alternate data source.
-	 */
+	if (strcasecmp(cfg_obj_asstring(typeobj), "master") != 0)
+		return (ISC_R_SUCCESS);
 	cfg_map_get(zoptions, "database", &dbobj);
-	if (dbobj != NULL &&
-	    strcmp("rbt", cfg_obj_asstring(dbobj)) != 0 &&
-	    strcmp("rbt64", cfg_obj_asstring(dbobj)) != 0)
+	if (dbobj != NULL)
 		return (ISC_R_SUCCESS);
-
-	cfg_map_get(zoptions, "dlz", &dlzobj);
-	if (dlzobj != NULL)
-		return (ISC_R_SUCCESS);
-
 	cfg_map_get(zoptions, "file", &fileobj);
-	if (fileobj != NULL)
-		zfile = cfg_obj_asstring(fileobj);
-
-	/*
-	 * Check hints files for hint zones.
-	 * Skip loading checks for any type other than
-	 * master and redirect
-	 */
-	if (strcasecmp(cfg_obj_asstring(typeobj), "hint") == 0)
-		return (configure_hint(zfile, zclass, mctx));
-	else if ((strcasecmp(cfg_obj_asstring(typeobj), "master") != 0) &&
-		  (strcasecmp(cfg_obj_asstring(typeobj), "redirect") != 0))
-		return (ISC_R_SUCCESS);
-
-	/*
-	 * Is the redirect zone configured as a slave?
-	 */
-	if (strcasecmp(cfg_obj_asstring(typeobj), "redirect") == 0) {
-		cfg_map_get(zoptions, "masters", &mastersobj);
-		if (mastersobj != NULL)
-			return (ISC_R_SUCCESS);
-	}
-
-	if (zfile == NULL)
+	if (fileobj == NULL)
 		return (ISC_R_FAILURE);
+	zfile = cfg_obj_asstring(fileobj);
 
 	obj = NULL;
 	if (get_maps(maps, "check-dup-records", &obj)) {
@@ -348,18 +294,6 @@ configure_zone(const char *vclass, const char *view,
 			zone_options &= ~DNS_ZONEOPT_CHECKSIBLING;
 	}
 
-	obj = NULL;
-	if (get_maps(maps, "check-spf", &obj)) {
-		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
-			zone_options |= DNS_ZONEOPT_CHECKSPF;
-		} else if (strcasecmp(cfg_obj_asstring(obj), "ignore") == 0) {
-			zone_options &= ~DNS_ZONEOPT_CHECKSPF;
-		} else
-			INSIST(0);
-	} else {
-		zone_options |= DNS_ZONEOPT_CHECKSPF;
-	}
-
 	obj = NULL;
 	if (get_checknames(maps, &obj)) {
 		if (strcasecmp(cfg_obj_asstring(obj), "warn") == 0) {
@@ -380,30 +314,22 @@ configure_zone(const char *vclass, const char *view,
 
 	masterformat = dns_masterformat_text;
 	fmtobj = NULL;
-	if (get_maps(maps, "masterfile-format", &fmtobj)) {
+	result = config_get(maps, "masterfile-format", &fmtobj);
+	if (result == ISC_R_SUCCESS) {
 		const char *masterformatstr = cfg_obj_asstring(fmtobj);
 		if (strcasecmp(masterformatstr, "text") == 0)
 			masterformat = dns_masterformat_text;
 		else if (strcasecmp(masterformatstr, "raw") == 0)
 			masterformat = dns_masterformat_raw;
-		else if (strcasecmp(masterformatstr, "map") == 0)
-			masterformat = dns_masterformat_map;
 		else
 			INSIST(0);
 	}
 
-	obj = NULL;
-	if (get_maps(maps, "max-zone-ttl", &obj)) {
-		maxttl = cfg_obj_asuint32(obj);
-		zone_options2 |= DNS_ZONEOPT2_CHECKTTL;
-	}
-
-	result = load_zone(mctx, zname, zfile, masterformat,
-			   zclass, maxttl, NULL);
+	result = load_zone(mctx, zname, zfile, masterformat, zclass, NULL);
 	if (result != ISC_R_SUCCESS)
 		fprintf(stderr, "%s/%s/%s: %s\n", view, zname, zclass,
 			dns_result_totext(result));
-	return (result);
+	return(result);
 }
 
 /*% configure a view */
@@ -440,27 +366,15 @@ configure_view(const char *vclass, const char *view, const cfg_obj_t *config,
 	return (result);
 }
 
-static isc_result_t
-config_getclass(const cfg_obj_t *classobj, dns_rdataclass_t defclass,
-		dns_rdataclass_t *classp)
-{
-	isc_textregion_t r;
-
-	if (!cfg_obj_isstring(classobj)) {
-		*classp = defclass;
-		return (ISC_R_SUCCESS);
-	}
-	DE_CONST(cfg_obj_asstring(classobj), r.base);
-	r.length = strlen(r.base);
-	return (dns_rdataclass_fromtext(classp, &r));
-}
 
 /*% load zones from the configuration */
 static isc_result_t
 load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 	const cfg_listelt_t *element;
+	const cfg_obj_t *classobj;
 	const cfg_obj_t *views;
 	const cfg_obj_t *vconfig;
+	const char *vclass;
 	isc_result_t result = ISC_R_SUCCESS;
 	isc_result_t tresult;
 
@@ -471,24 +385,17 @@ load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 	     element != NULL;
 	     element = cfg_list_next(element))
 	{
-		const cfg_obj_t *classobj;
-		dns_rdataclass_t viewclass;
 		const char *vname;
-		char buf[sizeof("CLASS65535")];
 
+		vclass = "IN";
 		vconfig = cfg_listelt_value(element);
-		if (vconfig == NULL)
-			continue;
-
-		classobj = cfg_tuple_get(vconfig, "class");
-		CHECK(config_getclass(classobj, dns_rdataclass_in,
-					 &viewclass));
-		if (dns_rdataclass_ismeta(viewclass))
-			CHECK(ISC_R_FAILURE);
-
-		dns_rdataclass_format(viewclass, buf, sizeof(buf));
+		if (vconfig != NULL) {
+			classobj = cfg_tuple_get(vconfig, "class");
+			if (cfg_obj_isstring(classobj))
+				vclass = cfg_obj_asstring(classobj);
+		}
 		vname = cfg_obj_asstring(cfg_tuple_get(vconfig, "name"));
-		tresult = configure_view(buf, vname, config, vconfig, mctx);
+		tresult = configure_view(vclass, vname, config, vconfig, mctx);
 		if (tresult != ISC_R_SUCCESS)
 			result = tresult;
 	}
@@ -498,8 +405,6 @@ load_zones_fromconfig(const cfg_obj_t *config, isc_mem_t *mctx) {
 		if (tresult != ISC_R_SUCCESS)
 			result = tresult;
 	}
-
-cleanup:
 	return (result);
 }
 
@@ -525,37 +430,10 @@ main(int argc, char **argv) {
 	isc_entropy_t *ectx = NULL;
 	isc_boolean_t load_zones = ISC_FALSE;
 	isc_boolean_t print = ISC_FALSE;
-	unsigned int flags = 0;
 
 	isc_commandline_errprint = ISC_FALSE;
 
-	/*
-	 * Process memory debugging argument first.
-	 */
-#define CMDLINE_FLAGS "dhjm:t:pvxz"
-	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != -1) {
-		switch (c) {
-		case 'm':
-			if (strcasecmp(isc_commandline_argument, "record") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGRECORD;
-			if (strcasecmp(isc_commandline_argument, "trace") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGTRACE;
-			if (strcasecmp(isc_commandline_argument, "usage") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGUSAGE;
-			if (strcasecmp(isc_commandline_argument, "size") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGSIZE;
-			if (strcasecmp(isc_commandline_argument, "mctx") == 0)
-				isc_mem_debugging |= ISC_MEM_DEBUGCTX;
-			break;
-		default:
-			break;
-		}
-	}
-	isc_commandline_reset = ISC_TRUE;
-
-	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
-
-	while ((c = isc_commandline_parse(argc, argv, CMDLINE_FLAGS)) != EOF) {
+	while ((c = isc_commandline_parse(argc, argv, "dhjt:pvz")) != EOF) {
 		switch (c) {
 		case 'd':
 			debug++;
@@ -565,9 +443,6 @@ main(int argc, char **argv) {
 			nomerge = ISC_FALSE;
 			break;
 
-		case 'm':
-			break;
-
 		case 't':
 			result = isc_dir_chroot(isc_commandline_argument);
 			if (result != ISC_R_SUCCESS) {
@@ -585,10 +460,6 @@ main(int argc, char **argv) {
 			printf(VERSION "\n");
 			exit(0);
 
-		case 'x':
-			flags |= CFG_PRINTER_XKEY;
-			break;
-
 		case 'z':
 			load_zones = ISC_TRUE;
 			docheckmx = ISC_FALSE;
@@ -600,7 +471,6 @@ main(int argc, char **argv) {
 			if (isc_commandline_option != '?')
 				fprintf(stderr, "%s: invalid argument -%c\n",
 					program, isc_commandline_option);
-			/* FALLTHROUGH */
 		case 'h':
 			usage();
 
@@ -611,11 +481,6 @@ main(int argc, char **argv) {
 		}
 	}
 
-	if (((flags & CFG_PRINTER_XKEY) != 0) && !print) {
-		fprintf(stderr, "%s: -x cannot be used without -p\n", program);
-		exit(1);
-	}
-
 	if (isc_commandline_index + 1 < argc)
 		usage();
 	if (argv[isc_commandline_index] != NULL)
@@ -627,6 +492,8 @@ main(int argc, char **argv) {
 	InitSockets();
 #endif
 
+	RUNTIME_CHECK(isc_mem_create(0, 0, &mctx) == ISC_R_SUCCESS);
+
 	RUNTIME_CHECK(setup_logging(mctx, stdout, &logc) == ISC_R_SUCCESS);
 
 	RUNTIME_CHECK(isc_entropy_create(mctx, &ectx) == ISC_R_SUCCESS);
@@ -654,7 +521,7 @@ main(int argc, char **argv) {
 	}
 
 	if (print && exit_status == 0)
-		cfg_printx(config, flags, output, NULL);
+		cfg_print(config, output, NULL);
 	cfg_obj_destroy(parser, &config);
 
 	cfg_parser_destroy(&parser);

bin/check/named-checkconf.docbook

@@ -1,7 +1,9 @@
-<!DOCTYPE book [
-<!ENTITY mdash "&#8212;">]>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004, 2005, 2007, 2009  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002  Internet Software Consortium.
  -
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -16,14 +18,10 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkconf">
-  <info>
-    <date>2014-01-10</date>
-  </info>
+<!-- $Id: named-checkconf.docbook,v 1.22 2009/12/28 23:21:16 each Exp $ -->
+<refentry id="man.named-checkconf">
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>June 14, 2000</date>
   </refentryinfo>
 
   <refmeta>
@@ -34,19 +32,18 @@
 
   <docinfo>
     <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
       <year>2004</year>
       <year>2005</year>
       <year>2007</year>
       <year>2009</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
+    <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
+      <holder>Internet Software Consortium.</holder>
+    </copyright>
   </docinfo>
 
   <refnamediv>
@@ -55,19 +52,20 @@
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-checkconf</command>
-      <arg choice="opt" rep="norepeat"><option>-hjvz</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-p</option>
-	<arg choice="opt" rep="norepeat"><option>-x</option>
-      </arg></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-h</option></arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-j</option></arg>
+      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg choice="req">filename</arg>
+      <arg><option>-p</option></arg>
+      <arg><option>-z</option></arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
+  <refsect1>
+    <title>DESCRIPTION</title>
     <para><command>named-checkconf</command>
       checks the syntax, but not the semantics, of a
       <command>named</command> configuration file.  The file is parsed
@@ -85,9 +83,10 @@
       successful.  <command>named-checkconf</command> can be run
       on these files explicitly, however.
     </para>
-  </refsection>
+  </refsect1>
 
-  <refsection><info><title>OPTIONS</title></info>
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -99,33 +98,13 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term>-j</term>
-        <listitem>
-          <para>
-            When loading a zonefile read the journal if it exists.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-p</term>
-        <listitem>
-          <para>
-	    Print out the <filename>named.conf</filename> and included files
-	    in canonical form if no errors were detected.
-            See also the <option>-x</option> option.
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-t <replaceable class="parameter">directory</replaceable></term>
         <listitem>
           <para>
             Chroot to <filename>directory</filename> so that include
             directives in the configuration file are processed as if
-            run by a similarly chrooted <command>named</command>.
+            run by a similarly chrooted named.
           </para>
         </listitem>
       </varlistentry>
@@ -141,16 +120,11 @@
       </varlistentry>
 
       <varlistentry>
-        <term>-x</term>
+        <term>-p</term>
         <listitem>
           <para>
-	    When printing the configuration files in canonical
-            form, obscure shared secrets by replacing them with
-            strings of question marks ('?'). This allows the
-            contents of <filename>named.conf</filename> and related
-            files to be shared &mdash; for example, when submitting
-            bug reports &mdash; without compromising private data.
-            This option cannot be used without <option>-p</option>.
+	    Print out the <filename>named.conf</filename> and included files
+	    in canonical form if no errors were detected.
           </para>
         </listitem>
       </varlistentry>
@@ -165,6 +139,15 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term>-j</term>
+        <listitem>
+          <para>
+            When loading a zonefile read the journal if it exists.
+          </para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term>filename</term>
         <listitem>
@@ -177,18 +160,18 @@
 
     </variablelist>
 
-  </refsection>
-
-  <refsection><info><title>RETURN VALUES</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>RETURN VALUES</title>
     <para><command>named-checkconf</command>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
@@ -197,5 +180,16 @@
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
-</refentry>
+  </refsect1>
+
+  <refsect1>
+    <title>AUTHOR</title>
+    <para><corpauthor>Internet Systems Consortium</corpauthor>
+    </para>
+  </refsect1>
+
+</refentry><!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->

bin/check/named-checkconf.html

@@ -1,6 +1,6 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2000-2002, 2004, 2005, 2007, 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002 Internet Software Consortium.
  - 
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,153 +14,100 @@
  - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  - PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
+<!-- $Id: named-checkconf.html,v 1.33 2009/12/29 01:14:03 tbox Exp $ -->
+<html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>named-checkconf</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
 <a name="man.named-checkconf"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  
-
-  <div class="refnamediv">
+<div class="refnamediv">
 <h2>Name</h2>
-<p>
-    <span class="application">named-checkconf</span>
-     &#8212; named configuration file syntax checking tool
-  </p>
+<p><span class="application">named-checkconf</span> &#8212; named configuration file syntax checking tool</p>
 </div>
-
-  <div class="refsynopsisdiv">
+<div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-checkconf</code> 
-       [<code class="option">-hjvz</code>]
-       [<code class="option">-p</code>
-	 [<code class="option">-x</code>
-      ]]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       {filename}
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>named-checkconf</strong></span>
+<div class="cmdsynopsis"><p><code class="command">named-checkconf</code>  [<code class="option">-h</code>] [<code class="option">-v</code>] [<code class="option">-j</code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] {filename} [<code class="option">-p</code>] [<code class="option">-z</code>]</p></div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543395"></a><h2>DESCRIPTION</h2>
+<p><span><strong class="command">named-checkconf</strong></span>
       checks the syntax, but not the semantics, of a
-      <span class="command"><strong>named</strong></span> configuration file.  The file is parsed
+      <span><strong class="command">named</strong></span> configuration file.  The file is parsed
       and checked for syntax errors, along with all files included by it.
       If no file is specified, <code class="filename">/etc/named.conf</code> is read
       by default.
     </p>
-    <p>
-      Note: files that <span class="command"><strong>named</strong></span> reads in separate
+<p>
+      Note: files that <span><strong class="command">named</strong></span> reads in separate
       parser contexts, such as <code class="filename">rndc.key</code> and
       <code class="filename">bind.keys</code>, are not automatically read
-      by <span class="command"><strong>named-checkconf</strong></span>.  Configuration
-      errors in these files may cause <span class="command"><strong>named</strong></span> to
-      fail to run, even if <span class="command"><strong>named-checkconf</strong></span> was
-      successful.  <span class="command"><strong>named-checkconf</strong></span> can be run
+      by <span><strong class="command">named-checkconf</strong></span>.  Configuration
+      errors in these files may cause <span><strong class="command">named</strong></span> to
+      fail to run, even if <span><strong class="command">named-checkconf</strong></span> was
+      successful.  <span><strong class="command">named-checkconf</strong></span> can be run
       on these files explicitly, however.
     </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-    <div class="variablelist"><dl class="variablelist">
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543444"></a><h2>OPTIONS</h2>
+<div class="variablelist"><dl>
 <dt><span class="term">-h</span></dt>
-<dd>
-          <p>
+<dd><p>
             Print the usage summary and exit.
-          </p>
-        </dd>
-<dt><span class="term">-j</span></dt>
-<dd>
-          <p>
-            When loading a zonefile read the journal if it exists.
-          </p>
-        </dd>
-<dt><span class="term">-p</span></dt>
-<dd>
-          <p>
-	    Print out the <code class="filename">named.conf</code> and included files
-	    in canonical form if no errors were detected.
-            See also the <code class="option">-x</code> option.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Chroot to <code class="filename">directory</code> so that include
             directives in the configuration file are processed as if
-            run by a similarly chrooted <span class="command"><strong>named</strong></span>.
-          </p>
-        </dd>
+            run by a similarly chrooted named.
+          </p></dd>
 <dt><span class="term">-v</span></dt>
-<dd>
-          <p>
-            Print the version of the <span class="command"><strong>named-checkconf</strong></span>
+<dd><p>
+            Print the version of the <span><strong class="command">named-checkconf</strong></span>
             program and exit.
-          </p>
-        </dd>
-<dt><span class="term">-x</span></dt>
-<dd>
-          <p>
-	    When printing the configuration files in canonical
-            form, obscure shared secrets by replacing them with
-            strings of question marks ('?'). This allows the
-            contents of <code class="filename">named.conf</code> and related
-            files to be shared &#8212; for example, when submitting
-            bug reports &#8212; without compromising private data.
-            This option cannot be used without <code class="option">-p</code>.
-          </p>
-        </dd>
+          </p></dd>
+<dt><span class="term">-p</span></dt>
+<dd><p>
+	    Print out the <code class="filename">named.conf</code> and included files
+	    in canonical form if no errors were detected.
+          </p></dd>
 <dt><span class="term">-z</span></dt>
-<dd>
-          <p>
+<dd><p>
 	    Perform a test load of all master zones found in
 	    <code class="filename">named.conf</code>.
-          </p>
-        </dd>
+          </p></dd>
+<dt><span class="term">-j</span></dt>
+<dd><p>
+            When loading a zonefile read the journal if it exists.
+          </p></dd>
 <dt><span class="term">filename</span></dt>
-<dd>
-          <p>
+<dd><p>
             The name of the configuration file to be checked.  If not
             specified, it defaults to <code class="filename">/etc/named.conf</code>.
-          </p>
-        </dd>
+          </p></dd>
 </dl></div>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>RETURN VALUES</h2>
-
-    <p><span class="command"><strong>named-checkconf</strong></span>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543568"></a><h2>RETURN VALUES</h2>
+<p><span><strong class="command">named-checkconf</strong></span>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named-checkzone</span>(8)
-      </span>,
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543579"></a><h2>SEE ALSO</h2>
+<p><span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
+      <span class="citerefentry"><span class="refentrytitle">named-checkzone</span>(8)</span>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-  </div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543609"></a><h2>AUTHOR</h2>
+<p><span class="corpauthor">Internet Systems Consortium</span>
+    </p>
+</div>
 </div></body>
 </html>

bin/check/named-checkzone.8

@@ -1,4 +1,5 @@
-.\" Copyright (C) 2000-2002, 2004-2007, 2009-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2004-2007, 2009, 2010 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2000-2002 Internet Software Consortium.
 .\" 
 .\" Permission to use, copy, modify, and/or distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
@@ -12,127 +13,106 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
+.\" $Id: named-checkzone.8,v 1.47 2010/01/17 01:14:02 tbox Exp $
+.\"
 .hy 0
 .ad l
-'\" t
-.\"     Title: named-checkzone
+.\"     Title: named\-checkzone
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-02-19
+.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
+.\"      Date: June 13, 2000
 .\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\"    Source: BIND9
 .\"
-.TH "NAMED\-CHECKZONE" "8" "2014\-02\-19" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
+.TH "NAMED\-CHECKZONE" "8" "June 13, 2000" "BIND9" "BIND9"
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
 .SH "NAME"
-named-checkzone, named-compilezone \- zone file validity checking or converting tool
+named\-checkzone, named\-compilezone \- zone file validity checking or converting tool
 .SH "SYNOPSIS"
-.HP \w'\fBnamed\-checkzone\fR\ 'u
-\fBnamed\-checkzone\fR [\fB\-d\fR] [\fB\-h\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-J\ \fR\fB\fIfilename\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-M\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-l\ \fR\fB\fIttl\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-o\ \fR\fB\fIfilename\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-S\ \fR\fB\fImode\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {zonename} {filename}
-.HP \w'\fBnamed\-compilezone\fR\ 'u
-\fBnamed\-compilezone\fR [\fB\-d\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-C\ \fR\fB\fImode\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-J\ \fR\fB\fIfilename\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-l\ \fR\fB\fIttl\fR\fR] [\fB\-L\ \fR\fB\fIserial\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-T\ \fR\fB\fImode\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {\fB\-o\ \fR\fB\fIfilename\fR\fR} {zonename} {filename}
+.HP 16
+\fBnamed\-checkzone\fR [\fB\-d\fR] [\fB\-h\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-M\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-o\ \fR\fB\fIfilename\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-S\ \fR\fB\fImode\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {zonename} {filename}
+.HP 18
+\fBnamed\-compilezone\fR [\fB\-d\fR] [\fB\-j\fR] [\fB\-q\fR] [\fB\-v\fR] [\fB\-c\ \fR\fB\fIclass\fR\fR] [\fB\-C\ \fR\fB\fImode\fR\fR] [\fB\-f\ \fR\fB\fIformat\fR\fR] [\fB\-F\ \fR\fB\fIformat\fR\fR] [\fB\-i\ \fR\fB\fImode\fR\fR] [\fB\-k\ \fR\fB\fImode\fR\fR] [\fB\-m\ \fR\fB\fImode\fR\fR] [\fB\-n\ \fR\fB\fImode\fR\fR] [\fB\-r\ \fR\fB\fImode\fR\fR] [\fB\-s\ \fR\fB\fIstyle\fR\fR] [\fB\-t\ \fR\fB\fIdirectory\fR\fR] [\fB\-w\ \fR\fB\fIdirectory\fR\fR] [\fB\-D\fR] [\fB\-W\ \fR\fB\fImode\fR\fR] {\fB\-o\ \fR\fB\fIfilename\fR\fR} {zonename} {filename}
 .SH "DESCRIPTION"
 .PP
 \fBnamed\-checkzone\fR
-checks the syntax and integrity of a zone file\&. It performs the same checks as
+checks the syntax and integrity of a zone file. It performs the same checks as
 \fBnamed\fR
-does when loading a zone\&. This makes
+does when loading a zone. This makes
 \fBnamed\-checkzone\fR
-useful for checking zone files before configuring them into a name server\&.
+useful for checking zone files before configuring them into a name server.
 .PP
 \fBnamed\-compilezone\fR
 is similar to
-\fBnamed\-checkzone\fR, but it always dumps the zone contents to a specified file in a specified format\&. Additionally, it applies stricter check levels by default, since the dump output will be used as an actual zone file loaded by
-\fBnamed\fR\&. When manually specified otherwise, the check levels must at least be as strict as those specified in the
+\fBnamed\-checkzone\fR, but it always dumps the zone contents to a specified file in a specified format. Additionally, it applies stricter check levels by default, since the dump output will be used as an actual zone file loaded by
+\fBnamed\fR. When manually specified otherwise, the check levels must at least be as strict as those specified in the
 \fBnamed\fR
-configuration file\&.
+configuration file.
 .SH "OPTIONS"
 .PP
 \-d
 .RS 4
-Enable debugging\&.
+Enable debugging.
 .RE
 .PP
 \-h
 .RS 4
-Print the usage summary and exit\&.
+Print the usage summary and exit.
 .RE
 .PP
 \-q
 .RS 4
-Quiet mode \- exit code only\&.
+Quiet mode \- exit code only.
 .RE
 .PP
 \-v
 .RS 4
 Print the version of the
 \fBnamed\-checkzone\fR
-program and exit\&.
+program and exit.
 .RE
 .PP
 \-j
 .RS 4
-When loading a zone file, read the journal if it exists\&. The journal file name is assumed to be the zone file name appended with the string
-\&.jnl\&.
-.RE
-.PP
-\-J \fIfilename\fR
-.RS 4
-When loading the zone file read the journal from the given file, if it exists\&. (Implies \-j\&.)
+When loading the zone file read the journal if it exists.
 .RE
 .PP
 \-c \fIclass\fR
 .RS 4
-Specify the class of the zone\&. If not specified, "IN" is assumed\&.
+Specify the class of the zone. If not specified, "IN" is assumed.
 .RE
 .PP
 \-i \fImode\fR
 .RS 4
-Perform post\-load zone integrity checks\&. Possible modes are
+Perform post\-load zone integrity checks. Possible modes are
 \fB"full"\fR
 (default),
 \fB"full\-sibling"\fR,
 \fB"local"\fR,
 \fB"local\-sibling"\fR
 and
-\fB"none"\fR\&.
+\fB"none"\fR.
 .sp
 Mode
 \fB"full"\fR
-checks that MX records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
+checks that MX records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). Mode
 \fB"local"\fR
-only checks MX records which refer to in\-zone hostnames\&.
+only checks MX records which refer to in\-zone hostnames.
 .sp
 Mode
 \fB"full"\fR
-checks that SRV records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. Mode
+checks that SRV records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). Mode
 \fB"local"\fR
-only checks SRV records which refer to in\-zone hostnames\&.
+only checks SRV records which refer to in\-zone hostnames.
 .sp
 Mode
 \fB"full"\fR
-checks that delegation NS records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames)\&. It also checks that glue address records in the zone match those advertised by the child\&. Mode
+checks that delegation NS records refer to A or AAAA record (both in\-zone and out\-of\-zone hostnames). It also checks that glue address records in the zone match those advertised by the child. Mode
 \fB"local"\fR
-only checks NS records which refer to in\-zone hostnames or that some required glue exists, that is when the nameserver is in a child zone\&.
+only checks NS records which refer to in\-zone hostnames or that some required glue exists, that is when the nameserver is in a child zone.
 .sp
 Mode
 \fB"full\-sibling"\fR
@@ -142,195 +122,166 @@ disable sibling glue checks but are otherwise the same as
 \fB"full"\fR
 and
 \fB"local"\fR
-respectively\&.
+respectively.
 .sp
 Mode
 \fB"none"\fR
-disables the checks\&.
+disables the checks.
 .RE
 .PP
 \-f \fIformat\fR
 .RS 4
-Specify the format of the zone file\&. Possible formats are
+Specify the format of the zone file. Possible formats are
 \fB"text"\fR
-(default),
-\fB"raw"\fR, and
-\fB"map"\fR\&.
+(default) and
+\fB"raw"\fR.
 .RE
 .PP
 \-F \fIformat\fR
 .RS 4
-Specify the format of the output file specified\&. For
-\fBnamed\-checkzone\fR, this does not cause any effects unless it dumps the zone contents\&.
-.sp
-Possible formats are
+Specify the format of the output file specified. Possible formats are
 \fB"text"\fR
-(default), which is the standard textual representation of the zone, and
-\fB"map"\fR,
-\fB"raw"\fR, and
-\fB"raw=N"\fR, which store the zone in a binary format for rapid loading by
-\fBnamed\fR\&.
-\fB"raw=N"\fR
-specifies the format version of the raw zone file: if N is 0, the raw file can be read by any version of
-\fBnamed\fR; if N is 1, the file can be read by release 9\&.9\&.0 or higher; the default is 1\&.
+(default) and
+\fB"raw"\fR. For
+\fBnamed\-checkzone\fR, this does not cause any effects unless it dumps the zone contents.
 .RE
 .PP
 \-k \fImode\fR
 .RS 4
 Perform
 \fB"check\-names"\fR
-checks with the specified failure mode\&. Possible modes are
+checks with the specified failure mode. Possible modes are
 \fB"fail"\fR
 (default for
 \fBnamed\-compilezone\fR),
 \fB"warn"\fR
 (default for
 \fBnamed\-checkzone\fR) and
-\fB"ignore"\fR\&.
-.RE
-.PP
-\-l \fIttl\fR
-.RS 4
-Sets a maximum permissible TTL for the input file\&. Any record with a TTL higher than this value will cause the zone to be rejected\&. This is similar to using the
-\fBmax\-zone\-ttl\fR
-option in
-named\&.conf\&.
-.RE
-.PP
-\-L \fIserial\fR
-.RS 4
-When compiling a zone to "raw" or "map" format, set the "source serial" value in the header to the specified serial number\&. (This is expected to be used primarily for testing purposes\&.)
+\fB"ignore"\fR.
 .RE
 .PP
 \-m \fImode\fR
 .RS 4
-Specify whether MX records should be checked to see if they are addresses\&. Possible modes are
+Specify whether MX records should be checked to see if they are addresses. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-M \fImode\fR
 .RS 4
-Check if a MX record refers to a CNAME\&. Possible modes are
+Check if a MX record refers to a CNAME. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-n \fImode\fR
 .RS 4
-Specify whether NS records should be checked to see if they are addresses\&. Possible modes are
+Specify whether NS records should be checked to see if they are addresses. Possible modes are
 \fB"fail"\fR
 (default for
 \fBnamed\-compilezone\fR),
 \fB"warn"\fR
 (default for
 \fBnamed\-checkzone\fR) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-o \fIfilename\fR
 .RS 4
 Write zone output to
-filename\&. If
-filename
+\fIfilename\fR. If
+\fIfilename\fR
 is
-\-
-then write to standard out\&. This is mandatory for
-\fBnamed\-compilezone\fR\&.
+\fI\-\fR
+then write to standard out. This is mandatory for
+\fBnamed\-compilezone\fR.
 .RE
 .PP
 \-r \fImode\fR
 .RS 4
-Check for records that are treated as different by DNSSEC but are semantically equal in plain DNS\&. Possible modes are
+Check for records that are treated as different by DNSSEC but are semantically equal in plain DNS. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-s \fIstyle\fR
 .RS 4
-Specify the style of the dumped zone file\&. Possible styles are
+Specify the style of the dumped zone file. Possible styles are
 \fB"full"\fR
 (default) and
-\fB"relative"\fR\&. The full format is most suitable for processing automatically by a separate script\&. On the other hand, the relative format is more human\-readable and is thus suitable for editing by hand\&. For
+\fB"relative"\fR. The full format is most suitable for processing automatically by a separate script. On the other hand, the relative format is more human\-readable and is thus suitable for editing by hand. For
 \fBnamed\-checkzone\fR
-this does not cause any effects unless it dumps the zone contents\&. It also does not have any meaning if the output format is not text\&.
+this does not cause any effects unless it dumps the zone contents. It also does not have any meaning if the output format is not text.
 .RE
 .PP
 \-S \fImode\fR
 .RS 4
-Check if a SRV record refers to a CNAME\&. Possible modes are
+Check if a SRV record refers to a CNAME. Possible modes are
 \fB"fail"\fR,
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 \-t \fIdirectory\fR
 .RS 4
 Chroot to
-directory
-so that include directives in the configuration file are processed as if run by a similarly chrooted named\&.
-.RE
-.PP
-\-T \fImode\fR
-.RS 4
-Check if Sender Policy Framework (SPF) records exist and issues a warning if an SPF\-formatted TXT record is not also present\&. Possible modes are
-\fB"warn"\fR
-(default),
-\fB"ignore"\fR\&.
+\fIdirectory\fR
+so that include directives in the configuration file are processed as if run by a similarly chrooted named.
 .RE
 .PP
 \-w \fIdirectory\fR
 .RS 4
 chdir to
-directory
-so that relative filenames in master file $INCLUDE directives work\&. This is similar to the directory clause in
-named\&.conf\&.
+\fIdirectory\fR
+so that relative filenames in master file $INCLUDE directives work. This is similar to the directory clause in
+\fInamed.conf\fR.
 .RE
 .PP
 \-D
 .RS 4
-Dump zone file in canonical format\&. This is always enabled for
-\fBnamed\-compilezone\fR\&.
+Dump zone file in canonical format. This is always enabled for
+\fBnamed\-compilezone\fR.
 .RE
 .PP
 \-W \fImode\fR
 .RS 4
-Specify whether to check for non\-terminal wildcards\&. Non\-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (RFC 1034)\&. Possible modes are
+Specify whether to check for non\-terminal wildcards. Non\-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (RFC 1034). Possible modes are
 \fB"warn"\fR
 (default) and
-\fB"ignore"\fR\&.
+\fB"ignore"\fR.
 .RE
 .PP
 zonename
 .RS 4
-The domain name of the zone being checked\&.
+The domain name of the zone being checked.
 .RE
 .PP
 filename
 .RS 4
-The name of the zone file\&.
+The name of the zone file.
 .RE
 .SH "RETURN VALUES"
 .PP
 \fBnamed\-checkzone\fR
-returns an exit status of 1 if errors were detected and 0 otherwise\&.
+returns an exit status of 1 if errors were detected and 0 otherwise.
 .SH "SEE ALSO"
 .PP
 \fBnamed\fR(8),
-\fBnamed-checkconf\fR(8),
+\fBnamed\-checkconf\fR(8),
 RFC 1035,
-BIND 9 Administrator Reference Manual\&.
+BIND 9 Administrator Reference Manual.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
+Internet Systems Consortium
 .SH "COPYRIGHT"
+Copyright \(co 2004\-2007, 2009, 2010 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2000-2002, 2004-2007, 2009-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+Copyright \(co 2000\-2002 Internet Software Consortium.
 .br

bin/check/named-checkzone.c

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 1999-2003  Internet Software Consortium.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,7 +15,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: named-checkzone.c,v 1.65.32.2 2012/02/07 02:45:21 each Exp $ */
+/* $Id: named-checkzone.c,v 1.61 2010/09/07 23:46:59 tbox Exp $ */
 
 /*! \file */
 
@@ -29,7 +30,6 @@
 #include <isc/hash.h>
 #include <isc/log.h>
 #include <isc/mem.h>
-#include <isc/print.h>
 #include <isc/socket.h>
 #include <isc/string.h>
 #include <isc/task.h>
@@ -39,7 +39,6 @@
 #include <dns/db.h>
 #include <dns/fixedname.h>
 #include <dns/log.h>
-#include <dns/master.h>
 #include <dns/masterdump.h>
 #include <dns/name.h>
 #include <dns/rdataclass.h>
@@ -57,7 +56,7 @@ dns_zone_t *zone = NULL;
 dns_zonetype_t zonetype = dns_zone_master;
 static int dumpzone = 0;
 static const char *output_filename;
-static const char *prog_name = NULL;
+static char *prog_name = NULL;
 static const dns_master_style_t *outputstyle = NULL;
 static enum { progmode_check, progmode_compile } progmode;
 
@@ -78,7 +77,7 @@ static void
 usage(void) {
 	fprintf(stderr,
 		"usage: %s [-djqvD] [-c class] "
-		"[-f inputformat] [-F outputformat] [-J filename] "
+		"[-f inputformat] [-F outputformat] "
 		"[-t directory] [-w directory] [-k (ignore|warn|fail)] "
 		"[-n (ignore|warn|fail)] [-m (ignore|warn|fail)] "
 		"[-r (ignore|warn|fail)] "
@@ -113,18 +112,7 @@ main(int argc, char **argv) {
 	const char *outputformatstr = NULL;
 	dns_masterformat_t inputformat = dns_masterformat_text;
 	dns_masterformat_t outputformat = dns_masterformat_text;
-	dns_masterrawheader_t header;
-	isc_uint32_t rawversion = 1, serialnum = 0;
-	dns_ttl_t maxttl = 0;
-	isc_boolean_t snset = ISC_FALSE;
-	isc_boolean_t logdump = ISC_FALSE;
 	FILE *errout = stdout;
-	char *endp;
-
-	/*
-	 * Uncomment the following line if memory debugging is needed:
-	 * isc_mem_debugging |= ISC_MEM_DEBUGRECORD;
-	 */
 
 	outputstyle = &dns_master_style_full;
 
@@ -156,21 +144,19 @@ main(int argc, char **argv) {
 	if (progmode == progmode_compile) {
 		zone_options |= (DNS_ZONEOPT_CHECKNS |
 				 DNS_ZONEOPT_FATALNS |
-				 DNS_ZONEOPT_CHECKSPF |
 				 DNS_ZONEOPT_CHECKDUPRR |
 				 DNS_ZONEOPT_CHECKNAMES |
 				 DNS_ZONEOPT_CHECKNAMESFAIL |
 				 DNS_ZONEOPT_CHECKWILDCARD);
 	} else
-		zone_options |= (DNS_ZONEOPT_CHECKDUPRR |
-				 DNS_ZONEOPT_CHECKSPF);
+		zone_options |= DNS_ZONEOPT_CHECKDUPRR;
 
 #define ARGCMP(X) (strcmp(isc_commandline_argument, X) == 0)
 
 	isc_commandline_errprint = ISC_FALSE;
 
 	while ((c = isc_commandline_parse(argc, argv,
-			       "c:df:hi:jJ:k:L:l:m:n:qr:s:t:o:vw:DF:M:S:T:W:"))
+				       "c:df:hi:jk:m:n:qr:s:t:o:vw:DF:M:S:W:"))
 	       != EOF) {
 		switch (c) {
 		case 'c':
@@ -231,11 +217,6 @@ main(int argc, char **argv) {
 			nomerge = ISC_FALSE;
 			break;
 
-		case 'J':
-			journal = isc_commandline_argument;
-			nomerge = ISC_FALSE;
-			break;
-
 		case 'k':
 			if (ARGCMP("warn")) {
 				zone_options |= DNS_ZONEOPT_CHECKNAMES;
@@ -253,29 +234,6 @@ main(int argc, char **argv) {
 			}
 			break;
 
-		case 'L':
-			snset = ISC_TRUE;
-			endp = NULL;
-			serialnum = strtol(isc_commandline_argument, &endp, 0);
-			if (*endp != '\0') {
-				fprintf(stderr, "source serial number "
-						"must be numeric");
-				exit(1);
-			}
-			break;
-
-		case 'l':
-			zone_options2 |= DNS_ZONEOPT2_CHECKTTL;
-			endp = NULL;
-			maxttl = strtol(isc_commandline_argument, &endp, 0);
-			if (*endp != '\0') {
-				fprintf(stderr, "maximum TTL "
-						"must be numeric");
-				exit(1);
-			}
-			break;
-
-
 		case 'n':
 			if (ARGCMP("ignore")) {
 				zone_options &= ~(DNS_ZONEOPT_CHECKNS|
@@ -404,18 +362,6 @@ main(int argc, char **argv) {
 			}
 			break;
 
-		case 'T':
-			if (ARGCMP("warn")) {
-				zone_options |= DNS_ZONEOPT_CHECKSPF;
-			} else if (ARGCMP("ignore")) {
-				zone_options &= ~DNS_ZONEOPT_CHECKSPF;
-			} else {
-				fprintf(stderr, "invalid argument to -T: %s\n",
-					isc_commandline_argument);
-				exit(1);
-			}
-			break;
-
 		case 'W':
 			if (ARGCMP("warn"))
 				zone_options |= DNS_ZONEOPT_CHECKWILDCARD;
@@ -427,7 +373,6 @@ main(int argc, char **argv) {
 			if (isc_commandline_option != '?')
 				fprintf(stderr, "%s: invalid argument -%c\n",
 					prog_name, isc_commandline_option);
-			/* FALLTHROUGH */
 		case 'h':
 			usage();
 
@@ -452,13 +397,7 @@ main(int argc, char **argv) {
 			inputformat = dns_masterformat_text;
 		else if (strcasecmp(inputformatstr, "raw") == 0)
 			inputformat = dns_masterformat_raw;
-		else if (strncasecmp(inputformatstr, "raw=", 4) == 0) {
-			inputformat = dns_masterformat_raw;
-			fprintf(stderr,
-				"WARNING: input format raw, version ignored\n");
-		} else if (strcasecmp(inputformatstr, "map") == 0) {
-			inputformat = dns_masterformat_map;
-		} else {
+		else {
 			fprintf(stderr, "unknown file format: %s\n",
 			    inputformatstr);
 			exit(1);
@@ -466,24 +405,11 @@ main(int argc, char **argv) {
 	}
 
 	if (outputformatstr != NULL) {
-		if (strcasecmp(outputformatstr, "text") == 0) {
+		if (strcasecmp(outputformatstr, "text") == 0)
 			outputformat = dns_masterformat_text;
-		} else if (strcasecmp(outputformatstr, "raw") == 0) {
+		else if (strcasecmp(outputformatstr, "raw") == 0)
 			outputformat = dns_masterformat_raw;
-		} else if (strncasecmp(outputformatstr, "raw=", 4) == 0) {
-			char *end;
-
-			outputformat = dns_masterformat_raw;
-			rawversion = strtol(outputformatstr + 4, &end, 10);
-			if (end == outputformatstr + 4 || *end != '\0' ||
-			    rawversion > 1U) {
-				fprintf(stderr,
-					"unknown raw format version\n");
-				exit(1);
-			}
-		} else if (strcasecmp(outputformatstr, "map") == 0) {
-			outputformat = dns_masterformat_map;
-		} else {
+		else {
 			fprintf(stderr, "unknown file format: %s\n",
 				outputformatstr);
 			exit(1);
@@ -492,7 +418,6 @@ main(int argc, char **argv) {
 
 	if (progmode == progmode_compile) {
 		dumpzone = 1;	/* always dump */
-		logdump = !quiet;
 		if (output_filename == NULL) {
 			fprintf(stderr,
 				"output file required, but not specified\n");
@@ -511,10 +436,8 @@ main(int argc, char **argv) {
 	    (output_filename == NULL ||
 	     strcmp(output_filename, "-") == 0 ||
 	     strcmp(output_filename, "/dev/fd/1") == 0 ||
-	     strcmp(output_filename, "/dev/stdout") == 0)) {
+	     strcmp(output_filename, "/dev/stdout") == 0))
 		errout = stderr;
-		logdump = ISC_FALSE;
-	}
 
 	if (isc_commandline_index + 2 != argc)
 		usage();
@@ -536,23 +459,16 @@ main(int argc, char **argv) {
 	origin = argv[isc_commandline_index++];
 	filename = argv[isc_commandline_index++];
 	result = load_zone(mctx, origin, filename, inputformat, classname,
-			   maxttl, &zone);
-
-	if (snset) {
-		dns_master_initrawheader(&header);
-		header.flags = DNS_MASTERRAW_SOURCESERIALSET;
-		header.sourceserial = serialnum;
-		dns_zone_setrawdata(zone, &header);
-	}
+			   &zone);
 
 	if (result == ISC_R_SUCCESS && dumpzone) {
-		if (logdump) {
+		if (!quiet && progmode == progmode_compile) {
 			fprintf(errout, "dump zone to %s...", output_filename);
 			fflush(errout);
 		}
 		result = dump_zone(origin, zone, output_filename,
-				   outputformat, outputstyle, rawversion);
-		if (logdump)
+				   outputformat, outputstyle);
+		if (!quiet && progmode == progmode_compile)
 			fprintf(errout, "done\n");
 	}
 

bin/check/named-checkzone.docbook

@@ -1,5 +1,9 @@
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004-2007, 2009, 2010  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002  Internet Software Consortium.
  -
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,14 +18,10 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.named-checkzone">
-  <info>
-    <date>2014-02-19</date>
-  </info>
+<!-- $Id: named-checkzone.docbook,v 1.40 2010/01/16 23:48:15 tbox Exp $ -->
+<refentry id="man.named-checkzone">
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>June 13, 2000</date>
   </refentryinfo>
 
   <refmeta>
@@ -32,24 +32,20 @@
 
   <docinfo>
     <copyright>
-      <year>2000</year>
-      <year>2001</year>
-      <year>2002</year>
       <year>2004</year>
       <year>2005</year>
       <year>2006</year>
       <year>2007</year>
       <year>2009</year>
       <year>2010</year>
-      <year>2011</year>
-      <year>2012</year>
-      <year>2013</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
+    <copyright>
+      <year>2000</year>
+      <year>2001</year>
+      <year>2002</year>
+      <holder>Internet Software Consortium.</holder>
+    </copyright>
   </docinfo>
 
   <refnamediv>
@@ -59,68 +55,60 @@
   </refnamediv>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-checkzone</command>
-      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-J <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-M <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-l <replaceable class="parameter">ttl</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-S <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">zonename</arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-d</option></arg>
+      <arg><option>-h</option></arg>
+      <arg><option>-j</option></arg>
+      <arg><option>-q</option></arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg><option>-f <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-F <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-M <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-s <replaceable class="parameter">style</replaceable></option></arg>
+      <arg><option>-S <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-D</option></arg>
+      <arg><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="req">zonename</arg>
+      <arg choice="req">filename</arg>
     </cmdsynopsis>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>named-compilezone</command>
-      <arg choice="opt" rep="norepeat"><option>-d</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-j</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-v</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">class</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-C <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-f <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-F <replaceable class="parameter">format</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-J <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-l <replaceable class="parameter">ttl</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-L <replaceable class="parameter">serial</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">style</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-T <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-D</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
-      <arg choice="req" rep="norepeat"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
-      <arg choice="req" rep="norepeat">zonename</arg>
-      <arg choice="req" rep="norepeat">filename</arg>
+      <arg><option>-d</option></arg>
+      <arg><option>-j</option></arg>
+      <arg><option>-q</option></arg>
+      <arg><option>-v</option></arg>
+      <arg><option>-c <replaceable class="parameter">class</replaceable></option></arg>
+      <arg><option>-C <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-f <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-F <replaceable class="parameter">format</replaceable></option></arg>
+      <arg><option>-i <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-k <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-m <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-n <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-r <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg><option>-s <replaceable class="parameter">style</replaceable></option></arg>
+      <arg><option>-t <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-w <replaceable class="parameter">directory</replaceable></option></arg>
+      <arg><option>-D</option></arg>
+      <arg><option>-W <replaceable class="parameter">mode</replaceable></option></arg>
+      <arg choice="req"><option>-o <replaceable class="parameter">filename</replaceable></option></arg>
+      <arg choice="req">zonename</arg>
+      <arg choice="req">filename</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
+  <refsect1>
+    <title>DESCRIPTION</title>
     <para><command>named-checkzone</command>
       checks the syntax and integrity of a zone file.  It performs the
       same checks as <command>named</command> does when loading a
@@ -138,10 +126,10 @@
         least be as strict as those specified in the
 	<command>named</command> configuration file.
      </para>
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -185,19 +173,7 @@
         <term>-j</term>
         <listitem>
           <para>
-            When loading a zone file, read the journal if it exists.
-            The journal file name is assumed to be the zone file name
-	    appended with the string <filename>.jnl</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-J <replaceable class="parameter">filename</replaceable></term>
-        <listitem>
-          <para>
-            When loading the zone file read the journal from the given
-            file, if it exists. (Implies -j.)
+            When loading the zone file read the journal if it exists.
           </para>
         </listitem>
       </varlistentry>
@@ -260,8 +236,8 @@
 	<listitem>
 	  <para>
 	    Specify the format of the zone file.
-	    Possible formats are <command>"text"</command> (default),
-	    <command>"raw"</command>, and <command>"map"</command>.
+	    Possible formats are <command>"text"</command> (default)
+	    and <command>"raw"</command>.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -271,21 +247,12 @@
 	<listitem>
 	  <para>
 	    Specify the format of the output file specified.
+	    Possible formats are <command>"text"</command> (default)
+	    and <command>"raw"</command>.
 	    For <command>named-checkzone</command>,
 	    this does not cause any effects unless it dumps the zone
 	    contents.
 	  </para>
-	  <para>
-	    Possible formats are <command>"text"</command> (default),
-	    which is the standard textual representation of the zone,
-	    and <command>"map"</command>, <command>"raw"</command>,
-            and <command>"raw=N"</command>, which store the zone in a
-            binary format for rapid loading by <command>named</command>.
-            <command>"raw=N"</command> specifies the format version of
-            the raw zone file: if N is 0, the raw file can be read by
-            any version of <command>named</command>; if N is 1, the file
-            can be read by release 9.9.0 or higher; the default is 1.
-	  </para>
 	</listitem>
       </varlistentry>
 
@@ -304,31 +271,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term>-l <replaceable class="parameter">ttl</replaceable></term>
-        <listitem>
-          <para>
-            Sets a maximum permissible TTL for the input file.
-            Any record with a TTL higher than this value will cause
-            the zone to be rejected.  This is similar to using the
-            <command>max-zone-ttl</command> option in
-            <filename>named.conf</filename>.
-          </para>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry>
-        <term>-L <replaceable class="parameter">serial</replaceable></term>
-        <listitem>
-          <para>
-            When compiling a zone to "raw" or "map" format, set the
-            "source serial" value in the header to the specified serial
-            number.  (This is expected to be used primarily for testing
-            purposes.)
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-m <replaceable class="parameter">mode</replaceable></term>
         <listitem>
@@ -385,7 +327,7 @@
         <listitem>
 	  <para>
             Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.
+	    are semantically equal in plain DNS.  
             Possible modes are <command>"fail"</command>,
             <command>"warn"</command> (default) and
             <command>"ignore"</command>.
@@ -437,18 +379,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-	<term>-T <replaceable class="parameter">mode</replaceable></term>
-	<listitem>
-	  <para>
-	    Check if Sender Policy Framework (SPF) records exist
-	    and issues a warning if an SPF-formatted TXT record is
-	    not also present.  Possible modes are <command>"warn"</command>
-	    (default), <command>"ignore"</command>.
-	  </para>
-	</listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-w <replaceable class="parameter">directory</replaceable></term>
         <listitem>
@@ -506,27 +436,37 @@
 
     </variablelist>
 
-  </refsection>
-
-  <refsection><info><title>RETURN VALUES</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>RETURN VALUES</title>
     <para><command>named-checkzone</command>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>named</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
       <citerefentry>
-        <refentrytitle>named-checkconf</refentrytitle><manvolnum>8</manvolnum>
+        <refentrytitle>named-checkconf</refentrytitle><manvolnum>8</manvolnum>  
       </citerefentry>,
       <citetitle>RFC 1035</citetitle>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
+  </refsect1>
 
-</refentry>
+  <refsect1>
+    <title>AUTHOR</title>
+    <para><corpauthor>Internet Systems Consortium</corpauthor>
+    </para>
+  </refsect1>
+
+</refentry><!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->

bin/check/named-checkzone.html

@@ -1,6 +1,6 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2000-2002, 2004-2007, 2009-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004-2007, 2009, 2010 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2000-2002 Internet Software Consortium.
  - 
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,424 +14,257 @@
  - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  - PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
+<!-- $Id: named-checkzone.html,v 1.47 2010/01/17 01:14:02 tbox Exp $ -->
+<html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>named-checkzone</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
 <a name="man.named-checkzone"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  
-
-  <div class="refnamediv">
+<div class="refnamediv">
 <h2>Name</h2>
-<p>
-    <span class="application">named-checkzone</span>, 
-    <span class="application">named-compilezone</span>
-     &#8212; zone file validity checking or converting tool
-  </p>
+<p><span class="application">named-checkzone</span>, <span class="application">named-compilezone</span> &#8212; zone file validity checking or converting tool</p>
 </div>
-
-  <div class="refsynopsisdiv">
+<div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-checkzone</code> 
-       [<code class="option">-d</code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-j</code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-v</code>]
-       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
-       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-J <em class="replaceable"><code>filename</code></em></code>]
-       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-M <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-l <em class="replaceable"><code>ttl</code></em></code>]
-       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
-       [<code class="option">-o <em class="replaceable"><code>filename</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
-       [<code class="option">-S <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-D</code>]
-       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
-       {zonename}
-       {filename}
-    </p></div>
-    <div class="cmdsynopsis"><p>
-      <code class="command">named-compilezone</code> 
-       [<code class="option">-d</code>]
-       [<code class="option">-j</code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-v</code>]
-       [<code class="option">-c <em class="replaceable"><code>class</code></em></code>]
-       [<code class="option">-C <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-f <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-F <em class="replaceable"><code>format</code></em></code>]
-       [<code class="option">-J <em class="replaceable"><code>filename</code></em></code>]
-       [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-l <em class="replaceable"><code>ttl</code></em></code>]
-       [<code class="option">-L <em class="replaceable"><code>serial</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>style</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-T <em class="replaceable"><code>mode</code></em></code>]
-       [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>]
-       [<code class="option">-D</code>]
-       [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>]
-       {<code class="option">-o <em class="replaceable"><code>filename</code></em></code>}
-       {zonename}
-       {filename}
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>named-checkzone</strong></span>
+<div class="cmdsynopsis"><p><code class="command">named-checkzone</code>  [<code class="option">-d</code>] [<code class="option">-h</code>] [<code class="option">-j</code>] [<code class="option">-q</code>] [<code class="option">-v</code>] [<code class="option">-c <em class="replaceable"><code>class</code></em></code>] [<code class="option">-f <em class="replaceable"><code>format</code></em></code>] [<code class="option">-F <em class="replaceable"><code>format</code></em></code>] [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-M <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-o <em class="replaceable"><code>filename</code></em></code>] [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-s <em class="replaceable"><code>style</code></em></code>] [<code class="option">-S <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-D</code>] [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>] {zonename} {filename}</p></div>
+<div class="cmdsynopsis"><p><code class="command">named-compilezone</code>  [<code class="option">-d</code>] [<code class="option">-j</code>] [<code class="option">-q</code>] [<code class="option">-v</code>] [<code class="option">-c <em class="replaceable"><code>class</code></em></code>] [<code class="option">-C <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-f <em class="replaceable"><code>format</code></em></code>] [<code class="option">-F <em class="replaceable"><code>format</code></em></code>] [<code class="option">-i <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-k <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-m <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-n <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-r <em class="replaceable"><code>mode</code></em></code>] [<code class="option">-s <em class="replaceable"><code>style</code></em></code>] [<code class="option">-t <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-w <em class="replaceable"><code>directory</code></em></code>] [<code class="option">-D</code>] [<code class="option">-W <em class="replaceable"><code>mode</code></em></code>] {<code class="option">-o <em class="replaceable"><code>filename</code></em></code>} {zonename} {filename}</p></div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543694"></a><h2>DESCRIPTION</h2>
+<p><span><strong class="command">named-checkzone</strong></span>
       checks the syntax and integrity of a zone file.  It performs the
-      same checks as <span class="command"><strong>named</strong></span> does when loading a
-      zone.  This makes <span class="command"><strong>named-checkzone</strong></span> useful for
+      same checks as <span><strong class="command">named</strong></span> does when loading a
+      zone.  This makes <span><strong class="command">named-checkzone</strong></span> useful for
       checking zone files before configuring them into a name server.
     </p>
-    <p>
-        <span class="command"><strong>named-compilezone</strong></span> is similar to
-	<span class="command"><strong>named-checkzone</strong></span>, but it always dumps the
+<p>
+        <span><strong class="command">named-compilezone</strong></span> is similar to
+	<span><strong class="command">named-checkzone</strong></span>, but it always dumps the
         zone contents to a specified file in a specified format.
 	Additionally, it applies stricter check levels by default,
         since the dump output will be used as an actual zone file
-	loaded by <span class="command"><strong>named</strong></span>.
+	loaded by <span><strong class="command">named</strong></span>.
 	When manually specified otherwise, the check levels must at
         least be as strict as those specified in the
-	<span class="command"><strong>named</strong></span> configuration file.
+	<span><strong class="command">named</strong></span> configuration file.
      </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543730"></a><h2>OPTIONS</h2>
+<div class="variablelist"><dl>
 <dt><span class="term">-d</span></dt>
-<dd>
-          <p>
+<dd><p>
             Enable debugging.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-h</span></dt>
-<dd>
-          <p>
+<dd><p>
             Print the usage summary and exit.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-q</span></dt>
-<dd>
-          <p>
+<dd><p>
             Quiet mode - exit code only.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-v</span></dt>
-<dd>
-          <p>
-            Print the version of the <span class="command"><strong>named-checkzone</strong></span>
+<dd><p>
+            Print the version of the <span><strong class="command">named-checkzone</strong></span>
             program and exit.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-j</span></dt>
-<dd>
-          <p>
-            When loading a zone file, read the journal if it exists.
-            The journal file name is assumed to be the zone file name
-	    appended with the string <code class="filename">.jnl</code>.
-          </p>
-        </dd>
-<dt><span class="term">-J <em class="replaceable"><code>filename</code></em></span></dt>
-<dd>
-          <p>
-            When loading the zone file read the journal from the given
-            file, if it exists. (Implies -j.)
-          </p>
-        </dd>
+<dd><p>
+            When loading the zone file read the journal if it exists.
+          </p></dd>
 <dt><span class="term">-c <em class="replaceable"><code>class</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify the class of the zone.  If not specified, "IN" is assumed.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-i <em class="replaceable"><code>mode</code></em></span></dt>
 <dd>
-	  <p>
+<p>
 	      Perform post-load zone integrity checks.  Possible modes are
-	      <span class="command"><strong>"full"</strong></span> (default),
-	      <span class="command"><strong>"full-sibling"</strong></span>,
-	      <span class="command"><strong>"local"</strong></span>,
-	      <span class="command"><strong>"local-sibling"</strong></span> and
-	      <span class="command"><strong>"none"</strong></span>.
+	      <span><strong class="command">"full"</strong></span> (default),
+	      <span><strong class="command">"full-sibling"</strong></span>,
+	      <span><strong class="command">"local"</strong></span>,
+	      <span><strong class="command">"local-sibling"</strong></span> and
+	      <span><strong class="command">"none"</strong></span>.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that MX records
+<p>
+	      Mode <span><strong class="command">"full"</strong></span> checks that MX records
 	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
+	      hostnames).  Mode <span><strong class="command">"local"</strong></span> only
 	      checks MX records which refer to in-zone hostnames.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that SRV records
+<p>
+	      Mode <span><strong class="command">"full"</strong></span> checks that SRV records
 	      refer to A or AAAA record (both in-zone and out-of-zone
-	      hostnames).  Mode <span class="command"><strong>"local"</strong></span> only
+	      hostnames).  Mode <span><strong class="command">"local"</strong></span> only
 	      checks SRV records which refer to in-zone hostnames.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full"</strong></span> checks that delegation NS
+<p>
+	      Mode <span><strong class="command">"full"</strong></span> checks that delegation NS
 	      records refer to A or AAAA record (both in-zone and out-of-zone
 	      hostnames).  It also checks that glue address records
 	      in the zone match those advertised by the child.
-	      Mode <span class="command"><strong>"local"</strong></span> only checks NS records which
+	      Mode <span><strong class="command">"local"</strong></span> only checks NS records which
 	      refer to in-zone hostnames or that some required glue exists,
 	      that is when the nameserver is in a child zone.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"full-sibling"</strong></span> and
-	      <span class="command"><strong>"local-sibling"</strong></span> disable sibling glue
-	      checks but are otherwise the same as <span class="command"><strong>"full"</strong></span>
-	      and <span class="command"><strong>"local"</strong></span> respectively.
+<p>
+	      Mode <span><strong class="command">"full-sibling"</strong></span> and
+	      <span><strong class="command">"local-sibling"</strong></span> disable sibling glue
+	      checks but are otherwise the same as <span><strong class="command">"full"</strong></span>
+	      and <span><strong class="command">"local"</strong></span> respectively.
 	  </p>
-	  <p>
-	      Mode <span class="command"><strong>"none"</strong></span> disables the checks.
+<p>
+	      Mode <span><strong class="command">"none"</strong></span> disables the checks.
 	  </p>
-	</dd>
+</dd>
 <dt><span class="term">-f <em class="replaceable"><code>format</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Specify the format of the zone file.
-	    Possible formats are <span class="command"><strong>"text"</strong></span> (default),
-	    <span class="command"><strong>"raw"</strong></span>, and <span class="command"><strong>"map"</strong></span>.
-	  </p>
-	</dd>
+	    Possible formats are <span><strong class="command">"text"</strong></span> (default)
+	    and <span><strong class="command">"raw"</strong></span>.
+	  </p></dd>
 <dt><span class="term">-F <em class="replaceable"><code>format</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Specify the format of the output file specified.
-	    For <span class="command"><strong>named-checkzone</strong></span>,
+	    Possible formats are <span><strong class="command">"text"</strong></span> (default)
+	    and <span><strong class="command">"raw"</strong></span>.
+	    For <span><strong class="command">named-checkzone</strong></span>,
 	    this does not cause any effects unless it dumps the zone
 	    contents.
-	  </p>
-	  <p>
-	    Possible formats are <span class="command"><strong>"text"</strong></span> (default),
-	    which is the standard textual representation of the zone,
-	    and <span class="command"><strong>"map"</strong></span>, <span class="command"><strong>"raw"</strong></span>,
-            and <span class="command"><strong>"raw=N"</strong></span>, which store the zone in a
-            binary format for rapid loading by <span class="command"><strong>named</strong></span>.
-            <span class="command"><strong>"raw=N"</strong></span> specifies the format version of
-            the raw zone file: if N is 0, the raw file can be read by
-            any version of <span class="command"><strong>named</strong></span>; if N is 1, the file
-            can be read by release 9.9.0 or higher; the default is 1.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-k <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
-            Perform <span class="command"><strong>"check-names"</strong></span> checks with the
+<dd><p>
+            Perform <span><strong class="command">"check-names"</strong></span> checks with the
 	    specified failure mode.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>
-	    (default for <span class="command"><strong>named-compilezone</strong></span>),
-            <span class="command"><strong>"warn"</strong></span>
-	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
-<dt><span class="term">-l <em class="replaceable"><code>ttl</code></em></span></dt>
-<dd>
-          <p>
-            Sets a maximum permissible TTL for the input file.
-            Any record with a TTL higher than this value will cause
-            the zone to be rejected.  This is similar to using the
-            <span class="command"><strong>max-zone-ttl</strong></span> option in
-            <code class="filename">named.conf</code>.
-          </p>
-        </dd>
-<dt><span class="term">-L <em class="replaceable"><code>serial</code></em></span></dt>
-<dd>
-          <p>
-            When compiling a zone to "raw" or "map" format, set the
-            "source serial" value in the header to the specified serial
-            number.  (This is expected to be used primarily for testing
-            purposes.)
-          </p>
-        </dd>
+            Possible modes are <span><strong class="command">"fail"</strong></span>
+	    (default for <span><strong class="command">named-compilezone</strong></span>),
+            <span><strong class="command">"warn"</strong></span>
+	    (default for <span><strong class="command">named-checkzone</strong></span>) and
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">-m <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify whether MX records should be checked to see if they
-            are addresses.  Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
+            are addresses.  Possible modes are <span><strong class="command">"fail"</strong></span>,
+            <span><strong class="command">"warn"</strong></span> (default) and
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">-M <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Check if a MX record refers to a CNAME.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
+            Possible modes are <span><strong class="command">"fail"</strong></span>,
+            <span><strong class="command">"warn"</strong></span> (default) and
+            <span><strong class="command">"ignore"</strong></span>.
+	  </p></dd>
 <dt><span class="term">-n <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify whether NS records should be checked to see if they
             are addresses.
-	    Possible modes are <span class="command"><strong>"fail"</strong></span>
-	    (default for <span class="command"><strong>named-compilezone</strong></span>),
-            <span class="command"><strong>"warn"</strong></span>
-	    (default for <span class="command"><strong>named-checkzone</strong></span>) and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
+	    Possible modes are <span><strong class="command">"fail"</strong></span>
+	    (default for <span><strong class="command">named-compilezone</strong></span>),
+            <span><strong class="command">"warn"</strong></span>
+	    (default for <span><strong class="command">named-checkzone</strong></span>) and
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">-o <em class="replaceable"><code>filename</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Write zone output to <code class="filename">filename</code>.
 	    If <code class="filename">filename</code> is <code class="filename">-</code> then
 	    write to standard out.
-	    This is mandatory for <span class="command"><strong>named-compilezone</strong></span>.
-          </p>
-        </dd>
+	    This is mandatory for <span><strong class="command">named-compilezone</strong></span>.
+          </p></dd>
 <dt><span class="term">-r <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
             Check for records that are treated as different by DNSSEC but
-	    are semantically equal in plain DNS.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
+	    are semantically equal in plain DNS.  
+            Possible modes are <span><strong class="command">"fail"</strong></span>,
+            <span><strong class="command">"warn"</strong></span> (default) and
+            <span><strong class="command">"ignore"</strong></span>.
+	  </p></dd>
 <dt><span class="term">-s <em class="replaceable"><code>style</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Specify the style of the dumped zone file.
-	    Possible styles are <span class="command"><strong>"full"</strong></span> (default)
-	    and <span class="command"><strong>"relative"</strong></span>.
+	    Possible styles are <span><strong class="command">"full"</strong></span> (default)
+	    and <span><strong class="command">"relative"</strong></span>.
 	    The full format is most suitable for processing
 	    automatically by a separate script.
 	    On the other hand, the relative format is more
 	    human-readable and is thus suitable for editing by hand.
-	    For <span class="command"><strong>named-checkzone</strong></span>
+	    For <span><strong class="command">named-checkzone</strong></span>
 	    this does not cause any effects unless it dumps the zone
 	    contents.
 	    It also does not have any meaning if the output format
 	    is not text.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-S <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Check if a SRV record refers to a CNAME.
-            Possible modes are <span class="command"><strong>"fail"</strong></span>,
-            <span class="command"><strong>"warn"</strong></span> (default) and
-            <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-        </dd>
+            Possible modes are <span><strong class="command">"fail"</strong></span>,
+            <span><strong class="command">"warn"</strong></span> (default) and
+            <span><strong class="command">"ignore"</strong></span>.
+	  </p></dd>
 <dt><span class="term">-t <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Chroot to <code class="filename">directory</code> so that
             include
             directives in the configuration file are processed as if
             run by a similarly chrooted named.
-          </p>
-        </dd>
-<dt><span class="term">-T <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-	  <p>
-	    Check if Sender Policy Framework (SPF) records exist
-	    and issues a warning if an SPF-formatted TXT record is
-	    not also present.  Possible modes are <span class="command"><strong>"warn"</strong></span>
-	    (default), <span class="command"><strong>"ignore"</strong></span>.
-	  </p>
-	</dd>
+          </p></dd>
 <dt><span class="term">-w <em class="replaceable"><code>directory</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             chdir to <code class="filename">directory</code> so that
             relative
             filenames in master file $INCLUDE directives work.  This
             is similar to the directory clause in
             <code class="filename">named.conf</code>.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-D</span></dt>
-<dd>
-          <p>
+<dd><p>
             Dump zone file in canonical format.
-	    This is always enabled for <span class="command"><strong>named-compilezone</strong></span>.
-          </p>
-        </dd>
+	    This is always enabled for <span><strong class="command">named-compilezone</strong></span>.
+          </p></dd>
 <dt><span class="term">-W <em class="replaceable"><code>mode</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specify whether to check for non-terminal wildcards.
             Non-terminal wildcards are almost always the result of a
             failure to understand the wildcard matching algorithm (RFC 1034).
-            Possible modes are <span class="command"><strong>"warn"</strong></span> (default)
+            Possible modes are <span><strong class="command">"warn"</strong></span> (default)
             and
-            <span class="command"><strong>"ignore"</strong></span>.
-          </p>
-        </dd>
+            <span><strong class="command">"ignore"</strong></span>.
+          </p></dd>
 <dt><span class="term">zonename</span></dt>
-<dd>
-          <p>
+<dd><p>
             The domain name of the zone being checked.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">filename</span></dt>
-<dd>
-          <p>
+<dd><p>
             The name of the zone file.
-          </p>
-        </dd>
+          </p></dd>
 </dl></div>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>RETURN VALUES</h2>
-
-    <p><span class="command"><strong>named-checkzone</strong></span>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2544377"></a><h2>RETURN VALUES</h2>
+<p><span><strong class="command">named-checkzone</strong></span>
       returns an exit status of 1 if
       errors were detected and 0 otherwise.
     </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named-checkconf</span>(8)
-      </span>,
+</div>
+<div class="refsect1" lang="en">
+<a name="id2544389"></a><h2>SEE ALSO</h2>
+<p><span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
+      <span class="citerefentry"><span class="refentrytitle">named-checkconf</span>(8)</span>,
       <em class="citetitle">RFC 1035</em>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-  </div>
-
+</div>
+<div class="refsect1" lang="en">
+<a name="id2544422"></a><h2>AUTHOR</h2>
+<p><span class="corpauthor">Internet Systems Consortium</span>
+    </p>
+</div>
 </div></body>
 </html>

bin/check/win32/checkconf.dsp.in

@@ -1,107 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checkconf" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=checkconf - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checkconf - @PLATFORM@ Release"
-# Name "checkconf - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkconf.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/checkconf.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "checkconf"=".\checkconf.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/checkconf.mak.in

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on checkconf.dsp
-!IF "$(CFG)" == ""
-CFG=checkconf - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to checkconf - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "checkconf - @PLATFORM@ Release" && "$(CFG)" != "checkconf - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkconf.mak" CFG="checkconf - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkconf - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkconf - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - @PLATFORM@ Release" "libisccfg - @PLATFORM@ Release" "libisc - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - @PLATFORM@ ReleaseCLEAN" "libisccfg - @PLATFORM@ ReleaseCLEAN" "libdns - @PLATFORM@ ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(OUTDIR)\checkconf.bsc"
-	-@erase "..\..\..\Build\Release\named-checkconf.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\checkconf.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib  ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkconf.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib"
-
-"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ELSE 
-
-ALL : "libdns - @PLATFORM@ Debug" "libisccfg - @PLATFORM@ Debug" "libisc - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\checkconf.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libisc - @PLATFORM@ DebugCLEAN" "libisccfg - @PLATFORM@ DebugCLEAN" "libdns - @PLATFORM@ DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkconf.obj"
-	-@erase "$(INTDIR)\named-checkconf.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkconf.pdb"
-	-@erase "$(OUTDIR)\checkconf.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
-	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkconf.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkconf.sbr"
-
-"$(OUTDIR)\checkconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib  ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkconf.obj" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib"
-
-"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("checkconf.dep")
-!INCLUDE "checkconf.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "checkconf.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "checkconf - @PLATFORM@ Release" || "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-SOURCE="..\check-tool.c"
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE="..\named-checkconf.c"
-
-"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libisc - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libisc - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libisccfg - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libisccfg - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisccfg - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isccfg\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkconf - @PLATFORM@ Release"
-
-"libdns - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkconf - @PLATFORM@ Debug"
-
-"libdns - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/check/win32/checkconf.vcxproj.filters.in

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkconf.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checkconf.vcxproj.in

@@ -1,115 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{03A96113-CB14-43AA-AEB2-48950E3915C5}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checkconf</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkconf.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checkconf.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/checktool.dsp

@@ -0,0 +1,113 @@
+# Microsoft Developer Studio Project File - Name="checktool" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static-Link Library" 0x0104
+
+CFG=checktool - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "checktool.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "checktool.mak" CFG="checktool - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "checktool - Win32 Release" (based on "Win32 (x86) Static-Link Library")
+!MESSAGE "checktool - Win32 Debug" (based on "Win32 (x86) Static-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "checktool - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /YX /FD /c /Fdchecktool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /out:"Release/checktool.lib"
+
+!ELSEIF  "$(CFG)" == "checktool - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR /YX /FD /GZ /c /Fdchecktool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /debug out:"Debug/checktool.lib"
+
+!ENDIF 
+
+# Begin Target
+
+# Name "checktool - Win32 Release"
+# Name "checktool - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# Begin Group "Main Dns Lib"
+
+# PROP Default_Filter "c"
+# Begin Source File
+
+SOURCE=..\check-tool.c
+# End Source File
+# End Group
+# End Target
+# End Project

bin/check/win32/checktool.dsp.in

@@ -1,113 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checktool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
-
-CFG=checktool - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checktool.mak" CFG="checktool - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checktool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE "checktool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checktool - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/checktool.lib"
-
-!ELSEIF  "$(CFG)" == "checktool - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isccfg/include" /I "../../../lib/dns/include" @CRYPTO@ /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdchecktool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug out:"Debug/checktool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checktool - @PLATFORM@ Release"
-# Name "checktool - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\check-tool.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/check/win32/checktool.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\check-tool.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checktool.vcxproj.in

@@ -1,101 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\check-tool.c" />
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{2C1F7096-C5B5-48D4-846F-A7ACA454335D}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checktool</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <OutDir>.\$(Configuration)\</OutDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <OutDir>.\$(Configuration)\</OutDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Lib>
-      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-    </Lib>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\isccfg\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Lib>
-      <OutputFile>.\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-    </Lib>
-  </ItemDefinitionGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checktool.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/checkzone.dsp.in

@@ -1,108 +0,0 @@
-# Microsoft Developer Studio Project File - Name="checkzone" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=checkzone - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" @COPTY@ /FD /c
-# SUBTRACT CPP /Fr
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "checkzone - @PLATFORM@ Release"
-# Name "checkzone - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\named-checkzone.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE="..\check-tool.h"
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/check/win32/checkzone.dsw

@@ -1,29 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "checkzone"=".\checkzone.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

bin/check/win32/checkzone.mak.in

@@ -1,404 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on checkzone.dsp
-!IF "$(CFG)" == ""
-CFG=checkzone - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to checkzone - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "checkzone - @PLATFORM@ Release" && "$(CFG)" != "checkzone - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "checkzone.mak" CFG="checkzone - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "checkzone - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "checkzone - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Release\named-checkzone.exe"
-
-!ELSE 
-
-ALL : "libisc - @PLATFORM@ Release" "libdns - @PLATFORM@ Release" "..\..\..\Build\Release\named-checkzone.exe"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - @PLATFORM@ ReleaseCLEAN" "libisc - @PLATFORM@ ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\named-checkzone.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /Fp"$(INTDIR)\checkzone.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" @MACHINE@ /out:"../../../Build/Release/named-checkzone.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Release\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Release\libisc.lib"
-
-"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
-
-!ELSE 
-
-ALL : "libisc - @PLATFORM@ Debug" "libdns - @PLATFORM@ Debug" "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\checkzone.bsc"
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"libdns - @PLATFORM@ DebugCLEAN" "libisc - @PLATFORM@ DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@erase "$(INTDIR)\check-tool.obj"
-	-@erase "$(INTDIR)\check-tool.sbr"
-	-@erase "$(INTDIR)\named-checkzone.obj"
-	-@erase "$(INTDIR)\named-checkzone.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\named-checkzone.pdb"
-	-@erase "$(OUTDIR)\checkzone.bsc"
-	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
-	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ @OPENSSL_INC@ /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" @CRYPTO@ /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\checkzone.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\check-tool.sbr" \
-	"$(INTDIR)\named-checkzone.sbr"
-
-"$(OUTDIR)\checkzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\check-tool.obj" \
-	"$(INTDIR)\named-checkzone.obj" \
-	"..\..\..\lib\dns\win32\Debug\libdns.lib" \
-	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
-	"..\..\..\lib\isc\win32\Debug\libisc.lib"
-
-"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("checkzone.dep")
-!INCLUDE "checkzone.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "checkzone.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "checkzone - @PLATFORM@ Release" || "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-SOURCE="..\check-tool.c"
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-
-"$(INTDIR)\check-tool.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE="..\named-checkzone.c"
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-
-"$(INTDIR)\named-checkzone.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-"libdns - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-"libdns - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libdns - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\dns\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-!IF  "$(CFG)" == "checkzone - @PLATFORM@ Release"
-
-"libisc - @PLATFORM@ Release" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ ReleaseCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Release" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ELSEIF  "$(CFG)" == "checkzone - @PLATFORM@ Debug"
-
-"libisc - @PLATFORM@ Debug" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" 
-   cd "..\..\..\bin\check\win32"
-
-"libisc - @PLATFORM@ DebugCLEAN" : 
-   cd "..\..\..\lib\isc\win32"
-   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - @PLATFORM@ Debug" RECURSE=1 CLEAN 
-   cd "..\..\..\bin\check\win32"
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/check/win32/checkzone.vcxproj.filters.in

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkzone.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/check/win32/checkzone.vcxproj.in

@@ -1,126 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{66028555-7DD5-4016-B601-9EF9A1EE8BFA}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>checkzone</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>named-$(ProjectName)</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y named-checkzone.exe named-compilezone.exe
-copy /Y named-checkzone.ilk named-compilezone.ilk
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;@CRYPTO@NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@@OPENSSL_INC@..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\bind9\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\bind9\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>checktool.lib;libisc.lib;libdns.lib;libisccfg.lib;libbind9.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y named-checkzone.exe named-compilezone.exe
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\check-tool.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\named-checkzone.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/check/win32/checkzone.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/check/win32/namedcheckconf.dsp

@@ -0,0 +1,107 @@
+# Microsoft Developer Studio Project File - Name="namedcheckconf" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=namedcheckconf - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkconf.exe"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "namedcheckconf - Win32 Release"
+# Name "namedcheckconf - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\named-checkconf.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/namedcheckconf.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "namedcheckconf"=".\namedcheckconf.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/namedcheckconf.mak

@@ -0,0 +1,404 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckconf.dsp
+!IF "$(CFG)" == ""
+CFG=namedcheckconf - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to namedcheckconf - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "namedcheckconf - Win32 Release" && "$(CFG)" != "namedcheckconf - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckconf.mak" CFG="namedcheckconf - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckconf - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckconf - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+# Begin Custom Macros
+OutDir=.\Release
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ELSE 
+
+ALL : "libdns - Win32 Release" "libisccfg - Win32 Release" "libisc - Win32 Release" "..\..\..\Build\Release\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libisc - Win32 ReleaseCLEAN" "libisccfg - Win32 ReleaseCLEAN" "libdns - Win32 ReleaseCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\namedcheckconf.bsc"
+	-@erase "..\..\..\Build\Release\named-checkconf.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /FR"$(INTDIR)\\" /Fp"$(INTDIR)\namedcheckconf.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib  ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/bind9/win32/Release/libbind9.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkconf.pdb" /machine:I386 /out:"../../../Build/Release/named-checkconf.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj" \
+	"..\..\..\lib\isc\win32\Release\libisc.lib" \
+	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
+	"..\..\..\lib\dns\win32\Release\libdns.lib"
+
+"..\..\..\Build\Release\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ELSE 
+
+ALL : "libdns - Win32 Debug" "libisccfg - Win32 Debug" "libisc - Win32 Debug" "..\..\..\Build\Debug\named-checkconf.exe" "$(OUTDIR)\namedcheckconf.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libisc - Win32 DebugCLEAN" "libisccfg - Win32 DebugCLEAN" "libdns - Win32 DebugCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkconf.obj"
+	-@erase "$(INTDIR)\named-checkconf.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkconf.pdb"
+	-@erase "$(OUTDIR)\namedcheckconf.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkconf.exe"
+	-@erase "..\..\..\Build\Debug\named-checkconf.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/bind9/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckconf.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkconf.sbr"
+
+"$(OUTDIR)\namedcheckconf.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib  ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/bind9/win32/Debug/libbind9.lib ../../../lib/bind9/win32/Debug/libbind9.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkconf.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkconf.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkconf.obj" \
+	"..\..\..\lib\isc\win32\Debug\libisc.lib" \
+	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
+	"..\..\..\lib\dns\win32\Debug\libdns.lib"
+
+"..\..\..\Build\Debug\named-checkconf.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("namedcheckconf.dep")
+!INCLUDE "namedcheckconf.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "namedcheckconf.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "namedcheckconf - Win32 Release" || "$(CFG)" == "namedcheckconf - Win32 Debug"
+SOURCE="..\check-tool.c"
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+SOURCE="..\named-checkconf.c"
+
+"$(INTDIR)\named-checkconf.obj"	"$(INTDIR)\named-checkconf.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+"libisc - Win32 Release" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+"libisc - Win32 Debug" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+"libisccfg - Win32 Release" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisccfg - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+"libisccfg - Win32 Debug" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisccfg - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\isccfg\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisccfg.mak" CFG="libisccfg - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckconf - Win32 Release"
+
+"libdns - Win32 Release" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckconf - Win32 Debug"
+
+"libdns - Win32 Debug" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/check/win32/namedcheckzone.dsp

@@ -0,0 +1,108 @@
+# Microsoft Developer Studio Project File - Name="namedcheckzone" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=namedcheckzone - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /YX /FD /c
+# SUBTRACT CPP /Fr
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/checktool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/named-checkzone.exe"
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/checktool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "namedcheckzone - Win32 Release"
+# Name "namedcheckzone - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\named-checkzone.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE="..\check-tool.h"
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/check/win32/namedcheckzone.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "namedcheckzone"=".\namedcheckzone.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

bin/check/win32/namedcheckzone.mak

@@ -0,0 +1,404 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on namedcheckzone.dsp
+!IF "$(CFG)" == ""
+CFG=namedcheckzone - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to namedcheckzone - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "namedcheckzone - Win32 Release" && "$(CFG)" != "namedcheckzone - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "namedcheckzone.mak" CFG="namedcheckzone - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "namedcheckzone - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "namedcheckzone - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Release\named-checkzone.exe"
+
+!ELSE 
+
+ALL : "libisc - Win32 Release" "libdns - Win32 Release" "..\..\..\Build\Release\named-checkzone.exe"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libdns - Win32 ReleaseCLEAN" "libisc - Win32 ReleaseCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\named-checkzone.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "__STDC__" /Fp"$(INTDIR)\namedcheckzone.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/dns/win32/Release/libdns.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\named-checkzone.pdb" /machine:I386 /out:"../../../Build/Release/named-checkzone.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj" \
+	"..\..\..\lib\dns\win32\Release\libdns.lib" \
+	"..\..\..\lib\isccfg\win32\Release\libisccfg.lib" \
+	"..\..\..\lib\isc\win32\Release\libisc.lib"
+
+"..\..\..\Build\Release\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+!IF "$(RECURSE)" == "0" 
+
+ALL : "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
+
+!ELSE 
+
+ALL : "libisc - Win32 Debug" "libdns - Win32 Debug" "..\..\..\Build\Debug\named-checkzone.exe" "$(OUTDIR)\namedcheckzone.bsc"
+
+!ENDIF 
+
+!IF "$(RECURSE)" == "1" 
+CLEAN :"libdns - Win32 DebugCLEAN" "libisc - Win32 DebugCLEAN" 
+!ELSE 
+CLEAN :
+!ENDIF 
+	-@erase "$(INTDIR)\check-tool.obj"
+	-@erase "$(INTDIR)\check-tool.sbr"
+	-@erase "$(INTDIR)\named-checkzone.obj"
+	-@erase "$(INTDIR)\named-checkzone.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\named-checkzone.pdb"
+	-@erase "$(OUTDIR)\namedcheckzone.bsc"
+	-@erase "..\..\..\Build\Debug\named-checkzone.exe"
+	-@erase "..\..\..\Build\Debug\named-checkzone.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/include" /I "../../../lib/isccfg/include" /D "_DEBUG" /D "__STDC__" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\namedcheckzone.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\check-tool.sbr" \
+	"$(INTDIR)\named-checkzone.sbr"
+
+"$(OUTDIR)\namedcheckzone.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/dns/win32/Debug/libdns.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\named-checkzone.pdb" /debug /machine:I386 /out:"../../../Build/Debug/named-checkzone.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\check-tool.obj" \
+	"$(INTDIR)\named-checkzone.obj" \
+	"..\..\..\lib\dns\win32\Debug\libdns.lib" \
+	"..\..\..\lib\isccfg\win32\Debug\libisccfg.lib" \
+	"..\..\..\lib\isc\win32\Debug\libisc.lib"
+
+"..\..\..\Build\Debug\named-checkzone.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("namedcheckzone.dep")
+!INCLUDE "namedcheckzone.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "namedcheckzone.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "namedcheckzone - Win32 Release" || "$(CFG)" == "namedcheckzone - Win32 Debug"
+SOURCE="..\check-tool.c"
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+
+"$(INTDIR)\check-tool.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+
+"$(INTDIR)\check-tool.obj"	"$(INTDIR)\check-tool.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE="..\named-checkzone.c"
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+
+"$(INTDIR)\named-checkzone.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+
+"$(INTDIR)\named-checkzone.obj"	"$(INTDIR)\named-checkzone.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+"libdns - Win32 Release" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+"libdns - Win32 Debug" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libdns - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\dns\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libdns.mak" CFG="libdns - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+!IF  "$(CFG)" == "namedcheckzone - Win32 Release"
+
+"libisc - Win32 Release" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 ReleaseCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Release" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ELSEIF  "$(CFG)" == "namedcheckzone - Win32 Debug"
+
+"libisc - Win32 Debug" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" 
+   cd "..\..\..\bin\check\win32"
+
+"libisc - Win32 DebugCLEAN" : 
+   cd "..\..\..\lib\isc\win32"
+   $(MAKE) /$(MAKEFLAGS) /F ".\libisc.mak" CFG="libisc - Win32 Debug" RECURSE=1 CLEAN 
+   cd "..\..\..\bin\check\win32"
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/confgen/.cvsignore

@@ -0,0 +1,3 @@
+Makefile
+ddns-confgen
+rndc-confgen

bin/confgen/.gitignore

@@ -1,3 +0,0 @@
-ddns-confgen
-rndc-confgen
-tsig-keygen

bin/confgen/Makefile.in

@@ -1,4 +1,4 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
 #
 # Permission to use, copy, modify, and/or distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
@@ -18,11 +18,7 @@ srcdir =	@srcdir@
 VPATH =		@srcdir@
 top_srcdir =	@top_srcdir@
 
-# Attempt to disable parallel processing.
-.NOTPARALLEL:
-.NO_PARALLEL:
-
-VERSION=@BIND9_VERSION@
+@BIND9_VERSION@
 
 @BIND9_MAKE_INCLUDES@
 
@@ -58,7 +54,7 @@ SRCS=		rndc-confgen.c ddns-confgen.c
 
 SUBDIRS =	unix
 
-TARGETS =	rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@
+TARGETS =	rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@
 
 MANPAGES =	rndc-confgen.8 ddns-confgen.8
 
@@ -78,19 +74,14 @@ rndc-confgen.@O@: rndc-confgen.c
 ddns-confgen.@O@: ddns-confgen.c
 	${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} -c ${srcdir}/ddns-confgen.c
 
-rndc-confgen@EXEEXT@: rndc-confgen.@O@ util.@O@ keygen.@O@ ${CONFDEPLIBS}
+rndc-confgen@EXEEXT@: rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS} 
 	export BASEOBJS="rndc-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
 	${FINALBUILDCMD}
 
-ddns-confgen@EXEEXT@: ddns-confgen.@O@ util.@O@ keygen.@O@ ${CONFDEPLIBS}
+ddns-confgen@EXEEXT@: ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS} ${CONFDEPLIBS} 
 	export BASEOBJS="ddns-confgen.@O@ util.@O@ keygen.@O@ ${UOBJS}"; \
 	${FINALBUILDCMD}
 
-# make a link in the build directory to assist with testing
-tsig-keygen@EXEEXT@: ddns-confgen@EXEEXT@
-	rm -f tsig-keygen@EXEEXT@
-	${LINK_PROGRAM} ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@
-
 doc man:: ${MANOBJS}
 
 docclean manclean maintainer-clean::
@@ -105,16 +96,6 @@ install:: rndc-confgen@EXEEXT@ ddns-confgen@EXEEXT@ installdirs
 	${LIBTOOL_MODE_INSTALL} ${INSTALL_PROGRAM} ddns-confgen@EXEEXT@ ${DESTDIR}${sbindir}
 	${INSTALL_DATA} ${srcdir}/rndc-confgen.8 ${DESTDIR}${mandir}/man8
 	${INSTALL_DATA} ${srcdir}/ddns-confgen.8 ${DESTDIR}${mandir}/man8
-	(cd ${DESTDIR}${sbindir}; rm -f tsig-keygen@EXEEXT@; ${LINK_PROGRAM} ddns-confgen@EXEEXT@ tsig-keygen@EXEEXT@)
-	(cd ${DESTDIR}${mandir}/man8; rm -f tsig-keygen.8; ${LINK_PROGRAM} ddns-confgen.8 tsig-keygen.8)
-
-uninstall::
-	rm -f ${DESTDIR}${mandir}/man8/tsig-keygen.8
-	rm -f ${DESTDIR}${sbindir}/tsig-keygen@EXEEXT@
-	rm -f ${DESTDIR}${mandir}/man8/ddns-confgen.8
-	rm -f ${DESTDIR}${mandir}/man8/rndc-confgen.8
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/ddns-confgen@EXEEXT@
-	${LIBTOOL_MODE_UNINSTALL} rm -f ${DESTDIR}${sbindir}/rndc-confgen@EXEEXT@
 
 clean distclean maintainer-clean::
 	rm -f ${TARGETS}

bin/confgen/ddns-confgen.8

@@ -1,4 +1,4 @@
-.\" Copyright (C) 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2009 Internet Systems Consortium, Inc. ("ISC")
 .\" 
 .\" Permission to use, copy, modify, and/or distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
@@ -12,92 +12,73 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
+.\" $Id: ddns-confgen.8,v 1.10 2009/09/19 01:14:52 tbox Exp $
+.\"
 .hy 0
 .ad l
-'\" t
-.\"     Title: ddns-confgen
+.\"     Title: ddns\-confgen
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2014-03-06
+.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
+.\"      Date: Jan 29, 2009
 .\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\"    Source: BIND9
 .\"
-.TH "DDNS\-CONFGEN" "8" "2014\-03\-06" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
+.TH "DDNS\-CONFGEN" "8" "Jan 29, 2009" "BIND9" "BIND9"
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
 .SH "NAME"
-ddns-confgen \- ddns key generation tool
+ddns\-confgen \- ddns key generation tool
 .SH "SYNOPSIS"
-.HP \w'\fBtsig\-keygen\fR\ 'u
-\fBtsig\-keygen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [name]
-.HP \w'\fBddns\-confgen\fR\ 'u
-\fBddns\-confgen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-q\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\-s\ \fIname\fR | \-z\ \fIzone\fR]
+.HP 13
+\fBddns\-confgen\fR [\fB\-a\ \fR\fB\fIalgorithm\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\-s\ \fIname\fR | \-z\ \fIzone\fR] [\fB\-q\fR] [name]
 .SH "DESCRIPTION"
 .PP
-\fBtsig\-keygen\fR
-and
 \fBddns\-confgen\fR
-are invocation methods for a utility that generates keys for use in TSIG signing\&. The resulting keys can be used, for example, to secure dynamic DNS updates to a zone or for the
-\fBrndc\fR
-command channel\&.
-.PP
-When run as
-\fBtsig\-keygen\fR, a domain name can be specified on the command line which will be used as the name of the generated key\&. If no name is specified, the default is
-\fBtsig\-key\fR\&.
-.PP
-When run as
-\fBddns\-confgen\fR, the generated key is accompanied by configuration text and instructions that can be used with
+generates a key for use by
 \fBnsupdate\fR
 and
-\fBnamed\fR
-when setting up dynamic DNS, including an example
+\fBnamed\fR. It simplifies configuration of dynamic zones by generating a key and providing the
+\fBnsupdate\fR
+and
+\fBnamed.conf\fR
+syntax that will be needed to use it, including an example
 \fBupdate\-policy\fR
-statement\&. (This usage similar to the
-\fBrndc\-confgen\fR
-command for setting up command channel security\&.)
+statement.
+.PP
+If a domain name is specified on the command line, it will be used in the name of the generated key and in the sample
+\fBnamed.conf\fR
+syntax. For example,
+\fBddns\-confgen example.com\fR
+would generate a key called "ddns\-key.example.com", and sample
+\fBnamed.conf\fR
+command that could be used in the zone definition for "example.com".
 .PP
 Note that
 \fBnamed\fR
 itself can configure a local DDNS key for use with
-\fBnsupdate \-l\fR: it does this when a zone is configured with
-\fBupdate\-policy local;\fR\&.
+\fBnsupdate \-l\fR.
 \fBddns\-confgen\fR
 is only needed when a more elaborate configuration is required: for instance, if
 \fBnsupdate\fR
-is to be used from a remote system\&.
+is to be used from a remote system.
 .SH "OPTIONS"
 .PP
 \-a \fIalgorithm\fR
 .RS 4
-Specifies the algorithm to use for the TSIG key\&. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512\&. The default is hmac\-sha256\&. Options are case\-insensitive, and the "hmac\-" prefix may be omitted\&.
+Specifies the algorithm to use for the TSIG key. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512. The default is hmac\-sha256.
 .RE
 .PP
 \-h
 .RS 4
-Prints a short summary of options and arguments\&.
+Prints a short summary of the options and arguments to
+\fBddns\-confgen\fR.
 .RE
 .PP
 \-k \fIkeyname\fR
 .RS 4
-Specifies the key name of the DDNS authentication key\&. The default is
+Specifies the key name of the DDNS authentication key. The default is
 \fBddns\-key\fR
 when neither the
 \fB\-s\fR
@@ -105,63 +86,58 @@ nor
 \fB\-z\fR
 option is specified; otherwise, the default is
 \fBddns\-key\fR
-as a separate label followed by the argument of the option, e\&.g\&.,
-\fBddns\-key\&.example\&.com\&.\fR
-The key name must have the format of a valid domain name, consisting of letters, digits, hyphens and periods\&.
+as a separate label followed by the argument of the option, e.g.,
+\fBddns\-key.example.com.\fR
+The key name must have the format of a valid domain name, consisting of letters, digits, hyphens and periods.
 .RE
 .PP
 \-q
 .RS 4
-(\fBddns\-confgen\fR
-only\&.) Quiet mode: Print only the key, with no explanatory text or usage examples; This is essentially identical to
-\fBtsig\-keygen\fR\&.
+Quiet mode: Print only the key, with no explanatory text or usage examples.
 .RE
 .PP
 \-r \fIrandomfile\fR
 .RS 4
-Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
-/dev/random
-or equivalent device, the default source of randomness is keyboard input\&.
-randomdev
-specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
-keyboard
-indicates that keyboard input should be used\&.
+Specifies a source of random data for generating the authorization. If the operating system does not provide a
+\fI/dev/random\fR
+or equivalent device, the default source of randomness is keyboard input.
+\fIrandomdev\fR
+specifies the name of a character device or file containing random data to be used instead of the default. The special value
+\fIkeyboard\fR
+indicates that keyboard input should be used.
 .RE
 .PP
 \-s \fIname\fR
 .RS 4
-(\fBddns\-confgen\fR
-only\&.) Generate configuration example to allow dynamic updates of a single hostname\&. The example
-\fBnamed\&.conf\fR
+Single host mode: The example
+\fBnamed.conf\fR
 text shows how to set an update policy for the specified
 \fIname\fR
-using the "name" nametype\&. The default key name is ddns\-key\&.\fIname\fR\&. Note that the "self" nametype cannot be used, since the name to be updated may differ from the key name\&. This option cannot be used with the
+using the "name" nametype. The default key name is ddns\-key.\fIname\fR. Note that the "self" nametype cannot be used, since the name to be updated may differ from the key name. This option cannot be used with the
 \fB\-z\fR
-option\&.
+option.
 .RE
 .PP
 \-z \fIzone\fR
 .RS 4
-(\fBddns\-confgen\fR
-only\&.) Generate configuration example to allow dynamic updates of a zone: The example
-\fBnamed\&.conf\fR
+zone mode: The example
+\fBnamed.conf\fR
 text shows how to set an update policy for the specified
 \fIzone\fR
 using the "zonesub" nametype, allowing updates to all subdomain names within that
-\fIzone\fR\&. This option cannot be used with the
+\fIzone\fR. This option cannot be used with the
 \fB\-s\fR
-option\&.
+option.
 .RE
 .SH "SEE ALSO"
 .PP
 \fBnsupdate\fR(1),
 \fBnamed.conf\fR(5),
 \fBnamed\fR(8),
-BIND 9 Administrator Reference Manual\&.
+BIND 9 Administrator Reference Manual.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
+Internet Systems Consortium
 .SH "COPYRIGHT"
-.br
-Copyright \(co 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+Copyright \(co 2009 Internet Systems Consortium, Inc. ("ISC")
 .br

bin/confgen/ddns-confgen.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009, 2011  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,6 +14,8 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
+/* $Id: ddns-confgen.c,v 1.9.308.2 2011/03/12 04:59:13 tbox Exp $ */
+
 /*! \file */
 
 /**
@@ -42,13 +44,8 @@
 #include <isc/time.h>
 #include <isc/util.h>
 
-#ifdef PKCS11CRYPTO
-#include <pk11/result.h>
-#endif
-
 #include <dns/keyvalues.h>
 #include <dns/name.h>
-#include <dns/result.h>
 
 #include <dst/dst.h>
 #include <confgen/os.h>
@@ -56,21 +53,20 @@
 #include "util.h"
 #include "keygen.h"
 
-#define KEYGEN_DEFAULT		"tsig-key"
-#define CONFGEN_DEFAULT		"ddns-key"
+#define DEFAULT_KEYNAME		"ddns-key"
 
 static char program[256];
 const char *progname;
-static enum { progmode_keygen, progmode_confgen} progmode;
-isc_boolean_t verbose = ISC_FALSE; /* needed by util.c but not used here */
+
+isc_boolean_t verbose = ISC_FALSE;
 
 ISC_PLATFORM_NORETURN_PRE static void
 usage(int status) ISC_PLATFORM_NORETURN_POST;
 
 static void
 usage(int status) {
-	if (progmode == progmode_confgen) {
-		fprintf(stderr, "\
+
+	fprintf(stderr, "\
 Usage:\n\
  %s [-a alg] [-k keyname] [-r randomfile] [-q] [-s name | -z zone]\n\
   -a alg:        algorithm (default hmac-sha256)\n\
@@ -79,70 +75,39 @@ Usage:\n\
   -s name:       domain name to be updated using the created key\n\
   -z zone:       name of the zone as it will be used in named.conf\n\
   -q:            quiet mode: print the key, with no explanatory text\n",
-			 progname);
-	} else {
-		fprintf(stderr, "\
-Usage:\n\
- %s [-a alg] [-r randomfile] [keyname]\n\
-  -a alg:        algorithm (default hmac-sha256)\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n",
-			 progname);
-	}
+		 progname);
 
 	exit (status);
 }
 
 int
 main(int argc, char **argv) {
-	isc_result_t result = ISC_R_SUCCESS;
 	isc_boolean_t show_final_mem = ISC_FALSE;
 	isc_boolean_t quiet = ISC_FALSE;
 	isc_buffer_t key_txtbuffer;
 	char key_txtsecret[256];
 	isc_mem_t *mctx = NULL;
+	isc_result_t result = ISC_R_SUCCESS;
 	const char *randomfile = NULL;
 	const char *keyname = NULL;
 	const char *zone = NULL;
 	const char *self_domain = NULL;
 	char *keybuf = NULL;
 	dns_secalg_t alg = DST_ALG_HMACSHA256;
-	const char *algname;
+	const char *algname = alg_totext(alg);
 	int keysize = 256;
 	int len = 0;
 	int ch;
 
-#ifdef PKCS11CRYPTO
-	pk11_result_register();
-#endif
-	dns_result_register();
-
 	result = isc_file_progname(*argv, program, sizeof(program));
 	if (result != ISC_R_SUCCESS)
-		memmove(program, "tsig-keygen", 11);
+		memcpy(program, "ddns-confgen", 13);
 	progname = program;
 
-	/*
-	 * Libtool doesn't preserve the program name prior to final
-	 * installation.  Remove the libtool prefix ("lt-").
-	 */
-	if (strncmp(progname, "lt-", 3) == 0)
-		progname += 3;
-
-#define PROGCMP(X) \
-	(strcasecmp(progname, X) == 0 || strcasecmp(progname, X ".exe") == 0)
-
-	if (PROGCMP("tsig-keygen")) {
-		progmode = progmode_keygen;
-		quiet = ISC_TRUE;
-	} else if (PROGCMP("ddns-confgen"))
-		progmode = progmode_confgen;
-	else
-		INSIST(0);
-
 	isc_commandline_errprint = ISC_FALSE;
 
 	while ((ch = isc_commandline_parse(argc, argv,
-					   "a:hk:Mmr:qs:y:z:")) != -1) {
+					   "a:hk:Mmr:qs:Vy:z:")) != -1) {
 		switch (ch) {
 		case 'a':
 			algname = isc_commandline_argument;
@@ -155,10 +120,7 @@ main(int argc, char **argv) {
 			usage(0);
 		case 'k':
 		case 'y':
-			if (progmode == progmode_confgen)
-				keyname = isc_commandline_argument;
-			else
-				usage(1);
+			keyname = isc_commandline_argument;
 			break;
 		case 'M':
 			isc_mem_debugging = ISC_MEM_DEBUGTRACE;
@@ -167,25 +129,19 @@ main(int argc, char **argv) {
 			show_final_mem = ISC_TRUE;
 			break;
 		case 'q':
-			if (progmode == progmode_confgen)
-				quiet = ISC_TRUE;
-			else
-				usage(1);
+			quiet = ISC_TRUE;
 			break;
 		case 'r':
 			randomfile = isc_commandline_argument;
 			break;
 		case 's':
-			if (progmode == progmode_confgen)
-				self_domain = isc_commandline_argument;
-			else
-				usage(1);
+			self_domain = isc_commandline_argument;
+			break;
+		case 'V':
+			verbose = ISC_TRUE;
 			break;
 		case 'z':
-			if (progmode == progmode_confgen)
-				zone = isc_commandline_argument;
-			else
-				usage(1);
+			zone = isc_commandline_argument;
 			break;
 		case '?':
 			if (isc_commandline_option != '?') {
@@ -202,28 +158,22 @@ main(int argc, char **argv) {
 		}
 	}
 
-	if (progmode == progmode_keygen)
-		keyname = argv[isc_commandline_index++];
-
+	argc -= isc_commandline_index;
+	argv += isc_commandline_index;
 	POST(argv);
 
 	if (self_domain != NULL && zone != NULL)
 		usage(1);	/* -s and -z cannot coexist */
 
-	if (argc > isc_commandline_index)
+	if (argc > 0)
 		usage(1);
 
-	/* Use canonical algorithm name */
-	algname = alg_totext(alg);
-
 	DO("create memory context", isc_mem_create(0, 0, &mctx));
 
 	if (keyname == NULL) {
 		const char *suffix = NULL;
 
-		keyname = ((progmode == progmode_keygen)
-			?  KEYGEN_DEFAULT
-			: CONFGEN_DEFAULT);
+		keyname = DEFAULT_KEYNAME;
 		if (self_domain != NULL)
 			suffix = self_domain;
 		else if (zone != NULL)

bin/confgen/ddns-confgen.docbook

@@ -1,5 +1,8 @@
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+	       "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  -
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,14 +17,10 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.ddns-confgen">
-  <info>
-    <date>2014-03-06</date>
-  </info>
+<!-- $Id: ddns-confgen.docbook,v 1.6 2009/09/18 22:08:55 fdupont Exp $ -->
+<refentry id="man.ddns-confgen">
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>Jan 29, 2009</date>
   </refentryinfo>
 
   <refmeta>
@@ -38,78 +37,58 @@
   <docinfo>
     <copyright>
       <year>2009</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
   </docinfo>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
-      <command>tsig-keygen</command>
-      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat">name</arg>
-    </cmdsynopsis>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>ddns-confgen</command>
-      <arg choice="opt" rep="norepeat"><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-q</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <group choice="opt" rep="norepeat">
-        <arg choice="plain" rep="norepeat">-s <replaceable class="parameter">name</replaceable></arg>
-        <arg choice="plain" rep="norepeat">-z <replaceable class="parameter">zone</replaceable></arg>
+      <arg><option>-a <replaceable class="parameter">algorithm</replaceable></option></arg>
+      <arg><option>-h</option></arg>
+      <arg><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
+      <arg><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
+      <group>
+        <arg choice="plain">-s <replaceable class="parameter">name</replaceable></arg>
+        <arg choice="plain">-z <replaceable class="parameter">zone</replaceable></arg>
       </group>
+      <arg><option>-q</option></arg>
+      <arg choice="opt">name</arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
-    <para>
-      <command>tsig-keygen</command> and <command>ddns-confgen</command>
-      are invocation methods for a utility that generates keys for use
-      in TSIG signing.  The resulting keys can be used, for example,
-      to secure dynamic DNS updates to a zone or for the
-      <command>rndc</command> command channel.
+  <refsect1>
+    <title>DESCRIPTION</title>
+    <para><command>ddns-confgen</command>
+      generates a key for use by <command>nsupdate</command>
+      and <command>named</command>.  It simplifies configuration
+      of dynamic zones by generating a key and providing the
+      <command>nsupdate</command> and <command>named.conf</command>
+      syntax that will be needed to use it, including an example
+      <command>update-policy</command> statement.
     </para>
 
     <para>
-      When run as <command>tsig-keygen</command>, a domain name
-      can be specified on the command line which will be used as
-      the name of the generated key.  If no name is specified,
-      the default is <constant>tsig-key</constant>.
-    </para>
-
-    <para>
-      When run as <command>ddns-confgen</command>, the generated
-      key is accompanied by configuration text and instructions
-      that can be used with <command>nsupdate</command> and
-      <command>named</command> when setting up dynamic DNS,
-      including an example <command>update-policy</command>
-      statement.  (This usage similar to the
-      <command>rndc-confgen</command> command for setting
-      up command channel security.)
+      If a domain name is specified on the command line, it will
+      be used in the name of the generated key and in the sample
+      <command>named.conf</command> syntax.  For example,
+      <command>ddns-confgen example.com</command> would
+      generate a key called "ddns-key.example.com", and sample
+      <command>named.conf</command> command that could be used
+      in the zone definition for "example.com".
     </para>
 
     <para>
       Note that <command>named</command> itself can configure a
-      local DDNS key for use with <command>nsupdate -l</command>:
-      it does this when a zone is configured with
-      <command>update-policy local;</command>.
-      <command>ddns-confgen</command> is only needed when a
-      more elaborate configuration is required: for instance,
-      if <command>nsupdate</command> is to be used from a remote
-      system.
+      local DDNS key for use with <command>nsupdate -l</command>.
+      <command>ddns-confgen</command> is only needed when a 
+      more elaborate configuration is required: for instance, if
+      <command>nsupdate</command> is to be used from a remote system.
     </para>
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -119,8 +98,6 @@
             Specifies the algorithm to use for the TSIG key.  Available
             choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
             hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
-            Options are case-insensitive, and the "hmac-" prefix
-            may be omitted.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -129,7 +106,8 @@
 	<term>-h</term>
 	<listitem>
 	  <para>
-	    Prints a short summary of options and arguments.
+	    Prints a short summary of the options and arguments to
+	    <command>ddns-confgen</command>.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -155,9 +133,8 @@
 	<term>-q</term>
 	<listitem>
 	  <para>
-	    (<command>ddns-confgen</command> only.) Quiet mode:  Print
-            only the key, with no explanatory text or usage examples;
-            This is essentially identical to <command>tsig-keygen</command>.
+	    Quiet mode:  Print only the key, with no explanatory text or
+            usage examples.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -183,12 +160,11 @@
 	<term>-s <replaceable class="parameter">name</replaceable></term>
 	<listitem>
 	  <para>
-            (<command>ddns-confgen</command> only.)
-	    Generate configuration example to allow dynamic updates
-            of a single hostname.  The example <command>named.conf</command>
-            text shows how to set an update policy for the specified
-            <replaceable class="parameter">name</replaceable>
-	    using the "name" nametype.  The default key name is
+	    Single host mode: The example <command>named.conf</command> text
+	    shows how to set an update policy for the specified
+	    <replaceable class="parameter">name</replaceable>
+	    using the "name" nametype.
+	    The default key name is
 	    ddns-key.<replaceable class="parameter">name</replaceable>.
 	    Note that the "self" nametype cannot be used, since
 	    the name to be updated may differ from the key name.
@@ -201,23 +177,21 @@
 	<term>-z <replaceable class="parameter">zone</replaceable></term>
 	<listitem>
 	  <para>
-            (<command>ddns-confgen</command> only.)
-	    Generate configuration example to allow dynamic updates
-            of a zone:  The example <command>named.conf</command> text
+	    zone mode:  The example <command>named.conf</command> text
             shows how to set an update policy for the specified
 	    <replaceable class="parameter">zone</replaceable>
-	    using the "zonesub" nametype, allowing updates to
-            all subdomain names within that
-            <replaceable class="parameter">zone</replaceable>.
+	    using the "zonesub" nametype, allowing updates to all subdomain
+	    names within
+	    that <replaceable class="parameter">zone</replaceable>.
 	    This option cannot be used with the <option>-s</option> option.
 	  </para>
 	</listitem>
       </varlistentry>
     </variablelist>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>SEE ALSO</title>
     <para><citerefentry>
 	<refentrytitle>nsupdate</refentrytitle><manvolnum>1</manvolnum>
       </citerefentry>,
@@ -229,6 +203,16 @@
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
+  </refsect1>
 
-</refentry>
+  <refsect1>
+    <title>AUTHOR</title>
+    <para><corpauthor>Internet Systems Consortium</corpauthor>
+    </para>
+  </refsect1>
+
+</refentry><!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->

bin/confgen/ddns-confgen.html

@@ -1,6 +1,5 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2009, 2014-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2009 Internet Systems Consortium, Inc. ("ISC")
  - 
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,117 +13,66 @@
  - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  - PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
+<!-- $Id: ddns-confgen.html,v 1.10 2009/09/19 01:14:52 tbox Exp $ -->
+<html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>ddns-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
 <a name="man.ddns-confgen"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  <div class="refnamediv">
+<div class="refnamediv">
 <h2>Name</h2>
-<p>
-    <span class="application">ddns-confgen</span>
-     &#8212; ddns key generation tool
-  </p>
+<p><span class="application">ddns-confgen</span> &#8212; ddns key generation tool</p>
 </div>
-
-  
-
-  <div class="refsynopsisdiv">
+<div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">tsig-keygen</code> 
-       [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [name]
-    </p></div>
-    <div class="cmdsynopsis"><p>
-      <code class="command">ddns-confgen</code> 
-       [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
-       [<code class="option">-q</code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [
-         -s <em class="replaceable"><code>name</code></em> 
-         |   -z <em class="replaceable"><code>zone</code></em> 
-      ]
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p>
-      <span class="command"><strong>tsig-keygen</strong></span> and <span class="command"><strong>ddns-confgen</strong></span>
-      are invocation methods for a utility that generates keys for use
-      in TSIG signing.  The resulting keys can be used, for example,
-      to secure dynamic DNS updates to a zone or for the
-      <span class="command"><strong>rndc</strong></span> command channel.
+<div class="cmdsynopsis"><p><code class="command">ddns-confgen</code>  [<code class="option">-a <em class="replaceable"><code>algorithm</code></em></code>] [<code class="option">-h</code>] [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>] [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>] [ -s <em class="replaceable"><code>name</code></em>  |   -z <em class="replaceable"><code>zone</code></em> ] [<code class="option">-q</code>] [name]</p></div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543395"></a><h2>DESCRIPTION</h2>
+<p><span><strong class="command">ddns-confgen</strong></span>
+      generates a key for use by <span><strong class="command">nsupdate</strong></span>
+      and <span><strong class="command">named</strong></span>.  It simplifies configuration
+      of dynamic zones by generating a key and providing the
+      <span><strong class="command">nsupdate</strong></span> and <span><strong class="command">named.conf</strong></span>
+      syntax that will be needed to use it, including an example
+      <span><strong class="command">update-policy</strong></span> statement.
     </p>
-
-    <p>
-      When run as <span class="command"><strong>tsig-keygen</strong></span>, a domain name
-      can be specified on the command line which will be used as
-      the name of the generated key.  If no name is specified,
-      the default is <code class="constant">tsig-key</code>.
+<p>
+      If a domain name is specified on the command line, it will
+      be used in the name of the generated key and in the sample
+      <span><strong class="command">named.conf</strong></span> syntax.  For example,
+      <span><strong class="command">ddns-confgen example.com</strong></span> would
+      generate a key called "ddns-key.example.com", and sample
+      <span><strong class="command">named.conf</strong></span> command that could be used
+      in the zone definition for "example.com".
     </p>
-
-    <p>
-      When run as <span class="command"><strong>ddns-confgen</strong></span>, the generated
-      key is accompanied by configuration text and instructions
-      that can be used with <span class="command"><strong>nsupdate</strong></span> and
-      <span class="command"><strong>named</strong></span> when setting up dynamic DNS,
-      including an example <span class="command"><strong>update-policy</strong></span>
-      statement.  (This usage similar to the
-      <span class="command"><strong>rndc-confgen</strong></span> command for setting
-      up command channel security.)
+<p>
+      Note that <span><strong class="command">named</strong></span> itself can configure a
+      local DDNS key for use with <span><strong class="command">nsupdate -l</strong></span>.
+      <span><strong class="command">ddns-confgen</strong></span> is only needed when a 
+      more elaborate configuration is required: for instance, if
+      <span><strong class="command">nsupdate</strong></span> is to be used from a remote system.
     </p>
-
-    <p>
-      Note that <span class="command"><strong>named</strong></span> itself can configure a
-      local DDNS key for use with <span class="command"><strong>nsupdate -l</strong></span>:
-      it does this when a zone is configured with
-      <span class="command"><strong>update-policy local;</strong></span>.
-      <span class="command"><strong>ddns-confgen</strong></span> is only needed when a
-      more elaborate configuration is required: for instance,
-      if <span class="command"><strong>nsupdate</strong></span> is to be used from a remote
-      system.
-    </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543454"></a><h2>OPTIONS</h2>
+<div class="variablelist"><dl>
 <dt><span class="term">-a <em class="replaceable"><code>algorithm</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
             Specifies the algorithm to use for the TSIG key.  Available
             choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
             hmac-sha384 and hmac-sha512.  The default is hmac-sha256.
-            Options are case-insensitive, and the "hmac-" prefix
-            may be omitted.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-h</span></dt>
-<dd>
-	  <p>
-	    Prints a short summary of options and arguments.
-	  </p>
-	</dd>
+<dd><p>
+	    Prints a short summary of the options and arguments to
+	    <span><strong class="command">ddns-confgen</strong></span>.
+	  </p></dd>
 <dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
 	    Specifies the key name of the DDNS authentication key.
 	    The default is <code class="constant">ddns-key</code> when neither
 	    the <code class="option">-s</code> nor <code class="option">-z</code> option is
@@ -134,19 +82,14 @@
 	    <code class="constant">ddns-key.example.com.</code>
 	    The key name must have the format of a valid domain name,
 	    consisting of letters, digits, hyphens and periods.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-q</span></dt>
-<dd>
-	  <p>
-	    (<span class="command"><strong>ddns-confgen</strong></span> only.) Quiet mode:  Print
-            only the key, with no explanatory text or usage examples;
-            This is essentially identical to <span class="command"><strong>tsig-keygen</strong></span>.
-	  </p>
-	</dd>
+<dd><p>
+	    Quiet mode:  Print only the key, with no explanatory text or
+            usage examples.
+	  </p></dd>
 <dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd>
-	  <p>
+<dd><p>
             Specifies a source of random data for generating the
             authorization.  If the operating system does not provide a
             <code class="filename">/dev/random</code> or equivalent device, the
@@ -156,55 +99,43 @@
             instead of the default.  The special value
             <code class="filename">keyboard</code> indicates that keyboard input
             should be used.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-s <em class="replaceable"><code>name</code></em></span></dt>
-<dd>
-	  <p>
-            (<span class="command"><strong>ddns-confgen</strong></span> only.)
-	    Generate configuration example to allow dynamic updates
-            of a single hostname.  The example <span class="command"><strong>named.conf</strong></span>
-            text shows how to set an update policy for the specified
-            <em class="replaceable"><code>name</code></em>
-	    using the "name" nametype.  The default key name is
+<dd><p>
+	    Single host mode: The example <span><strong class="command">named.conf</strong></span> text
+	    shows how to set an update policy for the specified
+	    <em class="replaceable"><code>name</code></em>
+	    using the "name" nametype.
+	    The default key name is
 	    ddns-key.<em class="replaceable"><code>name</code></em>.
 	    Note that the "self" nametype cannot be used, since
 	    the name to be updated may differ from the key name.
 	    This option cannot be used with the <code class="option">-z</code> option.
-	  </p>
-	</dd>
+	  </p></dd>
 <dt><span class="term">-z <em class="replaceable"><code>zone</code></em></span></dt>
-<dd>
-	  <p>
-            (<span class="command"><strong>ddns-confgen</strong></span> only.)
-	    Generate configuration example to allow dynamic updates
-            of a zone:  The example <span class="command"><strong>named.conf</strong></span> text
+<dd><p>
+	    zone mode:  The example <span><strong class="command">named.conf</strong></span> text
             shows how to set an update policy for the specified
 	    <em class="replaceable"><code>zone</code></em>
-	    using the "zonesub" nametype, allowing updates to
-            all subdomain names within that
-            <em class="replaceable"><code>zone</code></em>.
+	    using the "zonesub" nametype, allowing updates to all subdomain
+	    names within
+	    that <em class="replaceable"><code>zone</code></em>.
 	    This option cannot be used with the <code class="option">-s</code> option.
-	  </p>
-	</dd>
+	  </p></dd>
 </dl></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-	<span class="refentrytitle">nsupdate</span>(1)
-      </span>,
-      <span class="citerefentry">
-	<span class="refentrytitle">named.conf</span>(5)
-      </span>,
-      <span class="citerefentry">
-	<span class="refentrytitle">named</span>(8)
-      </span>,
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543642"></a><h2>SEE ALSO</h2>
+<p><span class="citerefentry"><span class="refentrytitle">nsupdate</span>(1)</span>,
+      <span class="citerefentry"><span class="refentrytitle">named.conf</span>(5)</span>,
+      <span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-  </div>
-
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543681"></a><h2>AUTHOR</h2>
+<p><span class="corpauthor">Internet Systems Consortium</span>
+    </p>
+</div>
 </div></body>
 </html>

bin/confgen/include/confgen/os.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above

bin/confgen/keygen.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -29,12 +29,9 @@
 #include <isc/file.h>
 #include <isc/keyboard.h>
 #include <isc/mem.h>
-#include <isc/print.h>
 #include <isc/result.h>
 #include <isc/string.h>
 
-#include <pk11/site.h>
-
 #include <dns/keyvalues.h>
 #include <dns/name.h>
 
@@ -50,10 +47,8 @@
 const char *
 alg_totext(dns_secalg_t alg) {
 	switch (alg) {
-#ifndef PK11_MD5_DISABLE
 	    case DST_ALG_HMACMD5:
 		return "hmac-md5";
-#endif
 	    case DST_ALG_HMACSHA1:
 		return "hmac-sha1";
 	    case DST_ALG_HMACSHA224:
@@ -74,23 +69,17 @@ alg_totext(dns_secalg_t alg) {
  */
 dns_secalg_t
 alg_fromtext(const char *name) {
-	const char *p = name;
-	if (strncasecmp(p, "hmac-", 5) == 0)
-		p = &name[5];
-
-#ifndef PK11_MD5_DISABLE
-	if (strcasecmp(p, "md5") == 0)
+	if (strcmp(name, "hmac-md5") == 0)
 		return DST_ALG_HMACMD5;
-#endif
-	if (strcasecmp(p, "sha1") == 0)
+	if (strcmp(name, "hmac-sha1") == 0)
 		return DST_ALG_HMACSHA1;
-	if (strcasecmp(p, "sha224") == 0)
+	if (strcmp(name, "hmac-sha224") == 0)
 		return DST_ALG_HMACSHA224;
-	if (strcasecmp(p, "sha256") == 0)
+	if (strcmp(name, "hmac-sha256") == 0)
 		return DST_ALG_HMACSHA256;
-	if (strcasecmp(p, "sha384") == 0)
+	if (strcmp(name, "hmac-sha384") == 0)
 		return DST_ALG_HMACSHA384;
-	if (strcasecmp(p, "sha512") == 0)
+	if (strcmp(name, "hmac-sha512") == 0)
 		return DST_ALG_HMACSHA512;
 	return DST_ALG_UNKNOWN;
 }
@@ -136,20 +125,14 @@ generate_key(isc_mem_t *mctx, const char *randomfile, dns_secalg_t alg,
 	dst_key_t *key = NULL;
 
 	switch (alg) {
-#ifndef PK11_MD5_DISABLE
 	    case DST_ALG_HMACMD5:
-#endif
-	    case DST_ALG_HMACSHA1:
-	    case DST_ALG_HMACSHA224:
-	    case DST_ALG_HMACSHA256:
 		if (keysize < 1 || keysize > 512)
 			fatal("keysize %d out of range (must be 1-512)\n",
 			      keysize);
 		break;
-	    case DST_ALG_HMACSHA384:
-	    case DST_ALG_HMACSHA512:
-		if (keysize < 1 || keysize > 1024)
-			fatal("keysize %d out of range (must be 1-1024)\n",
+	    case DST_ALG_HMACSHA256:
+		if (keysize < 1 || keysize > 256)
+			fatal("keysize %d out of range (must be 1-256)\n",
 			      keysize);
 		break;
 	    default:

bin/confgen/keygen.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above

bin/confgen/rndc-confgen.8

@@ -1,4 +1,5 @@
-.\" Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
+.\" Copyright (C) 2001, 2003 Internet Software Consortium.
 .\" 
 .\" Permission to use, copy, modify, and/or distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
@@ -12,73 +13,58 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
+.\" $Id: rndc-confgen.8,v 1.7 2009/07/11 01:12:45 tbox Exp $
+.\"
 .hy 0
 .ad l
-'\" t
-.\"     Title: rndc-confgen
+.\"     Title: rndc\-confgen
 .\"    Author: 
-.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\"      Date: 2013-03-14
+.\" Generator: DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>
+.\"      Date: Aug 27, 2001
 .\"    Manual: BIND9
-.\"    Source: ISC
-.\"  Language: English
+.\"    Source: BIND9
 .\"
-.TH "RNDC\-CONFGEN" "8" "2013\-03\-14" "ISC" "BIND9"
-.\" -----------------------------------------------------------------
-.\" * Define some portability stuff
-.\" -----------------------------------------------------------------
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.\" http://bugs.debian.org/507673
-.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
-.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\" -----------------------------------------------------------------
-.\" * set default formatting
-.\" -----------------------------------------------------------------
+.TH "RNDC\-CONFGEN" "8" "Aug 27, 2001" "BIND9" "BIND9"
 .\" disable hyphenation
 .nh
 .\" disable justification (adjust text to left margin only)
 .ad l
-.\" -----------------------------------------------------------------
-.\" * MAIN CONTENT STARTS HERE *
-.\" -----------------------------------------------------------------
 .SH "NAME"
-rndc-confgen \- rndc key generation tool
+rndc\-confgen \- rndc key generation tool
 .SH "SYNOPSIS"
-.HP \w'\fBrndc\-confgen\fR\ 'u
-\fBrndc\-confgen\fR [\fB\-a\fR] [\fB\-A\ \fR\fB\fIalgorithm\fR\fR] [\fB\-b\ \fR\fB\fIkeysize\fR\fR] [\fB\-c\ \fR\fB\fIkeyfile\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-p\ \fR\fB\fIport\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\fB\-s\ \fR\fB\fIaddress\fR\fR] [\fB\-t\ \fR\fB\fIchrootdir\fR\fR] [\fB\-u\ \fR\fB\fIuser\fR\fR]
+.HP 13
+\fBrndc\-confgen\fR [\fB\-a\fR] [\fB\-b\ \fR\fB\fIkeysize\fR\fR] [\fB\-c\ \fR\fB\fIkeyfile\fR\fR] [\fB\-h\fR] [\fB\-k\ \fR\fB\fIkeyname\fR\fR] [\fB\-p\ \fR\fB\fIport\fR\fR] [\fB\-r\ \fR\fB\fIrandomfile\fR\fR] [\fB\-s\ \fR\fB\fIaddress\fR\fR] [\fB\-t\ \fR\fB\fIchrootdir\fR\fR] [\fB\-u\ \fR\fB\fIuser\fR\fR]
 .SH "DESCRIPTION"
 .PP
 \fBrndc\-confgen\fR
 generates configuration files for
-\fBrndc\fR\&. It can be used as a convenient alternative to writing the
-rndc\&.conf
+\fBrndc\fR. It can be used as a convenient alternative to writing the
+\fIrndc.conf\fR
 file and the corresponding
 \fBcontrols\fR
 and
 \fBkey\fR
 statements in
-named\&.conf
-by hand\&. Alternatively, it can be run with the
+\fInamed.conf\fR
+by hand. Alternatively, it can be run with the
 \fB\-a\fR
 option to set up a
-rndc\&.key
+\fIrndc.key\fR
 file and avoid the need for a
-rndc\&.conf
+\fIrndc.conf\fR
 file and a
 \fBcontrols\fR
-statement altogether\&.
+statement altogether.
 .SH "OPTIONS"
 .PP
 \-a
 .RS 4
 Do automatic
 \fBrndc\fR
-configuration\&. This creates a file
-rndc\&.key
+configuration. This creates a file
+\fIrndc.key\fR
 in
-/etc
+\fI/etc\fR
 (or whatever
 \fIsysconfdir\fR
 was specified as when
@@ -87,13 +73,13 @@ was built) that is read by both
 \fBrndc\fR
 and
 \fBnamed\fR
-on startup\&. The
-rndc\&.key
+on startup. The
+\fIrndc.key\fR
 file defines a default command channel and authentication key allowing
 \fBrndc\fR
 to communicate with
 \fBnamed\fR
-on the local host with no further configuration\&.
+on the local host with no further configuration.
 .sp
 Running
 \fBrndc\-confgen \-a\fR
@@ -101,8 +87,8 @@ allows BIND 9 and
 \fBrndc\fR
 to be used as drop\-in replacements for BIND 8 and
 \fBndc\fR, with no changes to the existing BIND 8
-named\&.conf
-file\&.
+\fInamed.conf\fR
+file.
 .sp
 If a more elaborate configuration than that generated by
 \fBrndc\-confgen \-a\fR
@@ -111,20 +97,15 @@ is required, for example if rndc is to be used remotely, you should run
 without the
 \fB\-a\fR
 option and set up a
-rndc\&.conf
+\fIrndc.conf\fR
 and
-named\&.conf
-as directed\&.
-.RE
-.PP
-\-A \fIalgorithm\fR
-.RS 4
-Specifies the algorithm to use for the TSIG key\&. Available choices are: hmac\-md5, hmac\-sha1, hmac\-sha224, hmac\-sha256, hmac\-sha384 and hmac\-sha512\&. The default is hmac\-md5 or if MD5 was disabled hmac\-sha256\&.
+\fInamed.conf\fR
+as directed.
 .RE
 .PP
 \-b \fIkeysize\fR
 .RS 4
-Specifies the size of the authentication key in bits\&. Must be between 1 and 512 bits; the default is the hash size\&.
+Specifies the size of the authentication key in bits. Must be between 1 and 512 bits; the default is 128.
 .RE
 .PP
 \-c \fIkeyfile\fR
@@ -132,19 +113,19 @@ Specifies the size of the authentication key in bits\&. Must be between 1 and 51
 Used with the
 \fB\-a\fR
 option to specify an alternate location for
-rndc\&.key\&.
+\fIrndc.key\fR.
 .RE
 .PP
 \-h
 .RS 4
 Prints a short summary of the options and arguments to
-\fBrndc\-confgen\fR\&.
+\fBrndc\-confgen\fR.
 .RE
 .PP
 \-k \fIkeyname\fR
 .RS 4
-Specifies the key name of the rndc authentication key\&. This must be a valid domain name\&. The default is
-\fBrndc\-key\fR\&.
+Specifies the key name of the rndc authentication key. This must be a valid domain name. The default is
+\fBrndc\-key\fR.
 .RE
 .PP
 \-p \fIport\fR
@@ -152,18 +133,18 @@ Specifies the key name of the rndc authentication key\&. This must be a valid do
 Specifies the command channel port where
 \fBnamed\fR
 listens for connections from
-\fBrndc\fR\&. The default is 953\&.
+\fBrndc\fR. The default is 953.
 .RE
 .PP
 \-r \fIrandomfile\fR
 .RS 4
-Specifies a source of random data for generating the authorization\&. If the operating system does not provide a
-/dev/random
-or equivalent device, the default source of randomness is keyboard input\&.
-randomdev
-specifies the name of a character device or file containing random data to be used instead of the default\&. The special value
-keyboard
-indicates that keyboard input should be used\&.
+Specifies a source of random data for generating the authorization. If the operating system does not provide a
+\fI/dev/random\fR
+or equivalent device, the default source of randomness is keyboard input.
+\fIrandomdev\fR
+specifies the name of a character device or file containing random data to be used instead of the default. The special value
+\fIkeyboard\fR
+indicates that keyboard input should be used.
 .RE
 .PP
 \-s \fIaddress\fR
@@ -171,7 +152,7 @@ indicates that keyboard input should be used\&.
 Specifies the IP address where
 \fBnamed\fR
 listens for command channel connections from
-\fBrndc\fR\&. The default is the loopback address 127\&.0\&.0\&.1\&.
+\fBrndc\fR. The default is the loopback address 127.0.0.1.
 .RE
 .PP
 \-t \fIchrootdir\fR
@@ -180,10 +161,10 @@ Used with the
 \fB\-a\fR
 option to specify a directory where
 \fBnamed\fR
-will run chrooted\&. An additional copy of the
-rndc\&.key
+will run chrooted. An additional copy of the
+\fIrndc.key\fR
 will be written relative to this directory so that it will be found by the chrooted
-\fBnamed\fR\&.
+\fBnamed\fR.
 .RE
 .PP
 \-u \fIuser\fR
@@ -191,10 +172,10 @@ will be written relative to this directory so that it will be found by the chroo
 Used with the
 \fB\-a\fR
 option to set the owner of the
-rndc\&.key
-file generated\&. If
+\fIrndc.key\fR
+file generated. If
 \fB\-t\fR
-is also specified only the file in the chroot area has its owner changed\&.
+is also specified only the file in the chroot area has its owner changed.
 .RE
 .SH "EXAMPLES"
 .PP
@@ -205,13 +186,13 @@ to be used with no manual configuration, run
 \fBrndc\-confgen \-a\fR
 .PP
 To print a sample
-rndc\&.conf
+\fIrndc.conf\fR
 file and corresponding
 \fBcontrols\fR
 and
 \fBkey\fR
 statements to be manually inserted into
-named\&.conf, run
+\fInamed.conf\fR, run
 .PP
 \fBrndc\-confgen\fR
 .SH "SEE ALSO"
@@ -219,11 +200,12 @@ named\&.conf, run
 \fBrndc\fR(8),
 \fBrndc.conf\fR(5),
 \fBnamed\fR(8),
-BIND 9 Administrator Reference Manual\&.
+BIND 9 Administrator Reference Manual.
 .SH "AUTHOR"
 .PP
-\fBInternet Systems Consortium, Inc\&.\fR
+Internet Systems Consortium
 .SH "COPYRIGHT"
+Copyright \(co 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
 .br
-Copyright \(co 2001, 2003-2005, 2007, 2009, 2013-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+Copyright \(co 2001, 2003 Internet Software Consortium.
 .br

bin/confgen/rndc-confgen.c

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2004, 2005, 2007-2009, 2011  Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2001, 2003  Internet Software Consortium.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,7 +15,7 @@
  * PERFORMANCE OF THIS SOFTWARE.
  */
 
-/* $Id: rndc-confgen.c,v 1.7 2011/03/12 04:59:46 tbox Exp $ */
+/* $Id: rndc-confgen.c,v 1.5.308.2 2011/03/12 04:59:13 tbox Exp $ */
 
 /*! \file */
 
@@ -47,8 +48,6 @@
 #include <isc/time.h>
 #include <isc/util.h>
 
-#include <pk11/site.h>
-
 #include <dns/keyvalues.h>
 #include <dns/name.h>
 
@@ -58,6 +57,7 @@
 #include "util.h"
 #include "keygen.h"
 
+#define DEFAULT_KEYLENGTH	128		/*% Bits. */
 #define DEFAULT_KEYNAME		"rndc-key"
 #define DEFAULT_SERVER		"127.0.0.1"
 #define DEFAULT_PORT		953
@@ -75,14 +75,12 @@ usage(int status) ISC_PLATFORM_NORETURN_POST;
 static void
 usage(int status) {
 
-#ifndef PK11_MD5_DISABLE
 	fprintf(stderr, "\
 Usage:\n\
  %s [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-r randomfile] \
 [-s addr] [-t chrootdir] [-u user]\n\
   -a:		 generate just the key clause and write it to keyfile (%s)\n\
-  -A alg:	 algorithm (default hmac-md5)\n\
-  -b bits:	 from 1 through 512, default 256; total length of the secret\n\
+  -b bits:	 from 1 through 512, default %d; total length of the secret\n\
   -c keyfile:	 specify an alternate key file (requires -a)\n\
   -k keyname:	 the name as it will be used  in named.conf and rndc.conf\n\
   -p port:	 the port named will listen on and rndc will connect to\n\
@@ -90,24 +88,7 @@ Usage:\n\
   -s addr:	 the address to which rndc should connect\n\
   -t chrootdir:	 write a keyfile in chrootdir as well (requires -a)\n\
   -u user:	 set the keyfile owner to \"user\" (requires -a)\n",
-		 progname, keydef);
-#else
-	fprintf(stderr, "\
-Usage:\n\
- %s [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-r randomfile] \
-[-s addr] [-t chrootdir] [-u user]\n\
-  -a:		 generate just the key clause and write it to keyfile (%s)\n\
-  -A alg:	 algorithm (default hmac-sha256)\n\
-  -b bits:	 from 1 through 512, default 256; total length of the secret\n\
-  -c keyfile:	 specify an alternate key file (requires -a)\n\
-  -k keyname:	 the name as it will be used  in named.conf and rndc.conf\n\
-  -p port:	 the port named will listen on and rndc will connect to\n\
-  -r randomfile: source of random data (use \"keyboard\" for key timing)\n\
-  -s addr:	 the address to which rndc should connect\n\
-  -t chrootdir:	 write a keyfile in chrootdir as well (requires -a)\n\
-  -u user:	 set the keyfile owner to \"user\" (requires -a)\n",
-		 progname, keydef);
-#endif
+		 progname, keydef, DEFAULT_KEYLENGTH);
 
 	exit (status);
 }
@@ -122,12 +103,12 @@ main(int argc, char **argv) {
 	const char *keyname = NULL;
 	const char *randomfile = NULL;
 	const char *serveraddr = NULL;
-	dns_secalg_t alg;
-	const char *algname;
+	dns_secalg_t alg = DST_ALG_HMACMD5;
+	const char *algname = alg_totext(alg);
 	char *p;
 	int ch;
 	int port;
-	int keysize = -1;
+	int keysize;
 	struct in_addr addr4_dummy;
 	struct in6_addr addr6_dummy;
 	char *chrootdir = NULL;
@@ -139,37 +120,28 @@ main(int argc, char **argv) {
 
 	result = isc_file_progname(*argv, program, sizeof(program));
 	if (result != ISC_R_SUCCESS)
-		memmove(program, "rndc-confgen", 13);
+		memcpy(program, "rndc-confgen", 13);
 	progname = program;
 
 	keyname = DEFAULT_KEYNAME;
-#ifndef PK11_MD5_DISABLE
-	alg = DST_ALG_HMACMD5;
-#else
-	alg = DST_ALG_HMACSHA256;
-#endif
+	keysize = DEFAULT_KEYLENGTH;
 	serveraddr = DEFAULT_SERVER;
 	port = DEFAULT_PORT;
 
 	isc_commandline_errprint = ISC_FALSE;
 
 	while ((ch = isc_commandline_parse(argc, argv,
-					   "aA:b:c:hk:Mmp:r:s:t:u:Vy")) != -1)
-	{
+					   "ab:c:hk:Mmp:r:s:t:u:Vy")) != -1) {
 		switch (ch) {
 		case 'a':
 			keyonly = ISC_TRUE;
 			break;
-		case 'A':
-			algname = isc_commandline_argument;
-			alg = alg_fromtext(algname);
-			if (alg == DST_ALG_UNKNOWN)
-				fatal("Unsupported algorithm '%s'", algname);
-			break;
 		case 'b':
 			keysize = strtol(isc_commandline_argument, &p, 10);
 			if (*p != '\0' || keysize < 0)
 				fatal("-b requires a non-negative number");
+			if (keysize < 1 || keysize > 512)
+				fatal("-b must be in the range 1 through 512");
 			break;
 		case 'c':
 			keyfile = isc_commandline_argument;
@@ -233,10 +205,6 @@ main(int argc, char **argv) {
 	if (argc > 0)
 		usage(1);
 
-	if (keysize < 0)
-		keysize = alg_bits(alg);
-	algname = alg_totext(alg);
-
 	DO("create memory context", isc_mem_create(0, 0, &mctx));
 	isc_buffer_init(&key_txtbuffer, &key_txtsecret, sizeof(key_txtsecret));
 

bin/confgen/rndc-confgen.docbook

@@ -1,5 +1,9 @@
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+               "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+	       [<!ENTITY mdash "&#8212;">]>
 <!--
- - Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004, 2005, 2007, 2009  Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2001, 2003  Internet Software Consortium.
  -
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,14 +18,10 @@
  - PERFORMANCE OF THIS SOFTWARE.
 -->
 
-<!-- Converted by db4-upgrade version 1.0 -->
-<refentry xmlns:db="http://docbook.org/ns/docbook" version="5.0" xml:id="man.rndc-confgen">
-  <info>
-    <date>2013-03-14</date>
-  </info>
+<!-- $Id: rndc-confgen.docbook,v 1.4 2009/06/15 23:47:59 tbox Exp $ -->
+<refentry id="man.rndc-confgen">
   <refentryinfo>
-    <corpname>ISC</corpname>
-    <corpauthor>Internet Systems Consortium, Inc.</corpauthor>
+    <date>Aug 27, 2001</date>
   </refentryinfo>
 
   <refmeta>
@@ -37,40 +37,37 @@
 
   <docinfo>
     <copyright>
-      <year>2001</year>
-      <year>2003</year>
       <year>2004</year>
       <year>2005</year>
       <year>2007</year>
       <year>2009</year>
-      <year>2013</year>
-      <year>2014</year>
-      <year>2015</year>
-      <year>2016</year>
-      <year>2018</year>
       <holder>Internet Systems Consortium, Inc. ("ISC")</holder>
     </copyright>
+    <copyright>
+      <year>2001</year>
+      <year>2003</year>
+      <holder>Internet Software Consortium.</holder>
+    </copyright>
   </docinfo>
 
   <refsynopsisdiv>
-    <cmdsynopsis sepchar=" ">
+    <cmdsynopsis>
       <command>rndc-confgen</command>
-      <arg choice="opt" rep="norepeat"><option>-a</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-A <replaceable class="parameter">algorithm</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-b <replaceable class="parameter">keysize</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-c <replaceable class="parameter">keyfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-h</option></arg>
-      <arg choice="opt" rep="norepeat"><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-p <replaceable class="parameter">port</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-s <replaceable class="parameter">address</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-t <replaceable class="parameter">chrootdir</replaceable></option></arg>
-      <arg choice="opt" rep="norepeat"><option>-u <replaceable class="parameter">user</replaceable></option></arg>
+      <arg><option>-a</option></arg>
+      <arg><option>-b <replaceable class="parameter">keysize</replaceable></option></arg>
+      <arg><option>-c <replaceable class="parameter">keyfile</replaceable></option></arg>
+      <arg><option>-h</option></arg>
+      <arg><option>-k <replaceable class="parameter">keyname</replaceable></option></arg>
+      <arg><option>-p <replaceable class="parameter">port</replaceable></option></arg>
+      <arg><option>-r <replaceable class="parameter">randomfile</replaceable></option></arg>
+      <arg><option>-s <replaceable class="parameter">address</replaceable></option></arg>
+      <arg><option>-t <replaceable class="parameter">chrootdir</replaceable></option></arg>
+      <arg><option>-u <replaceable class="parameter">user</replaceable></option></arg>
     </cmdsynopsis>
   </refsynopsisdiv>
 
-  <refsection><info><title>DESCRIPTION</title></info>
-
+  <refsect1>
+    <title>DESCRIPTION</title>
     <para><command>rndc-confgen</command>
       generates configuration files
       for <command>rndc</command>.  It can be used as a
@@ -85,10 +82,10 @@
       and a <command>controls</command> statement altogether.
     </para>
 
-  </refsection>
-
-  <refsection><info><title>OPTIONS</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>OPTIONS</title>
 
     <variablelist>
       <varlistentry>
@@ -131,25 +128,12 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term>-A <replaceable class="parameter">algorithm</replaceable></term>
-        <listitem>
-          <para>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-md5 or
-            if MD5 was disabled hmac-sha256.
-          </para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term>-b <replaceable class="parameter">keysize</replaceable></term>
         <listitem>
           <para>
             Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is the
-            hash size.
+            Must be between 1 and 512 bits; the default is 128.
           </para>
         </listitem>
       </varlistentry>
@@ -255,10 +239,10 @@
       </varlistentry>
 
     </variablelist>
-  </refsection>
-
-  <refsection><info><title>EXAMPLES</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>EXAMPLES</title>
     <para>
       To allow <command>rndc</command> to be used with
       no manual configuration, run
@@ -273,10 +257,10 @@
     </para>
     <para><userinput>rndc-confgen</userinput>
     </para>
-  </refsection>
-
-  <refsection><info><title>SEE ALSO</title></info>
+  </refsect1>
 
+  <refsect1>
+    <title>SEE ALSO</title>
     <para><citerefentry>
         <refentrytitle>rndc</refentrytitle><manvolnum>8</manvolnum>
       </citerefentry>,
@@ -288,6 +272,16 @@
       </citerefentry>,
       <citetitle>BIND 9 Administrator Reference Manual</citetitle>.
     </para>
-  </refsection>
+  </refsect1>
 
-</refentry>
+  <refsect1>
+    <title>AUTHOR</title>
+    <para><corpauthor>Internet Systems Consortium</corpauthor>
+    </para>
+  </refsect1>
+
+</refentry><!--
+ - Local variables:
+ - mode: sgml
+ - End:
+-->

bin/confgen/rndc-confgen.html

@@ -1,6 +1,6 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
 <!--
- - Copyright (C) 2001, 2003-2005, 2007, 2009, 2013-2016, 2018 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2004, 2005, 2007, 2009 Internet Systems Consortium, Inc. ("ISC")
+ - Copyright (C) 2001, 2003 Internet Software Consortium.
  - 
  - Permission to use, copy, modify, and/or distribute this software for any
  - purpose with or without fee is hereby granted, provided that the above
@@ -14,158 +14,108 @@
  - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  - PERFORMANCE OF THIS SOFTWARE.
 -->
-<html lang="en">
+<!-- $Id: rndc-confgen.html,v 1.7 2009/07/11 01:12:45 tbox Exp $ -->
+<html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>rndc-confgen</title>
-<meta name="generator" content="DocBook XSL Stylesheets V1.78.1">
+<meta name="generator" content="DocBook XSL Stylesheets V1.71.1">
 </head>
-<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry">
+<body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="refentry" lang="en">
 <a name="man.rndc-confgen"></a><div class="titlepage"></div>
-  
-  
-
-  
-
-  <div class="refnamediv">
+<div class="refnamediv">
 <h2>Name</h2>
-<p>
-    <span class="application">rndc-confgen</span>
-     &#8212; rndc key generation tool
-  </p>
+<p><span class="application">rndc-confgen</span> &#8212; rndc key generation tool</p>
 </div>
-
-  
-
-  <div class="refsynopsisdiv">
+<div class="refsynopsisdiv">
 <h2>Synopsis</h2>
-    <div class="cmdsynopsis"><p>
-      <code class="command">rndc-confgen</code> 
-       [<code class="option">-a</code>]
-       [<code class="option">-A <em class="replaceable"><code>algorithm</code></em></code>]
-       [<code class="option">-b <em class="replaceable"><code>keysize</code></em></code>]
-       [<code class="option">-c <em class="replaceable"><code>keyfile</code></em></code>]
-       [<code class="option">-h</code>]
-       [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>]
-       [<code class="option">-p <em class="replaceable"><code>port</code></em></code>]
-       [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>]
-       [<code class="option">-s <em class="replaceable"><code>address</code></em></code>]
-       [<code class="option">-t <em class="replaceable"><code>chrootdir</code></em></code>]
-       [<code class="option">-u <em class="replaceable"><code>user</code></em></code>]
-    </p></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.7"></a><h2>DESCRIPTION</h2>
-
-    <p><span class="command"><strong>rndc-confgen</strong></span>
+<div class="cmdsynopsis"><p><code class="command">rndc-confgen</code>  [<code class="option">-a</code>] [<code class="option">-b <em class="replaceable"><code>keysize</code></em></code>] [<code class="option">-c <em class="replaceable"><code>keyfile</code></em></code>] [<code class="option">-h</code>] [<code class="option">-k <em class="replaceable"><code>keyname</code></em></code>] [<code class="option">-p <em class="replaceable"><code>port</code></em></code>] [<code class="option">-r <em class="replaceable"><code>randomfile</code></em></code>] [<code class="option">-s <em class="replaceable"><code>address</code></em></code>] [<code class="option">-t <em class="replaceable"><code>chrootdir</code></em></code>] [<code class="option">-u <em class="replaceable"><code>user</code></em></code>]</p></div>
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543432"></a><h2>DESCRIPTION</h2>
+<p><span><strong class="command">rndc-confgen</strong></span>
       generates configuration files
-      for <span class="command"><strong>rndc</strong></span>.  It can be used as a
+      for <span><strong class="command">rndc</strong></span>.  It can be used as a
       convenient alternative to writing the
       <code class="filename">rndc.conf</code> file
-      and the corresponding <span class="command"><strong>controls</strong></span>
-      and <span class="command"><strong>key</strong></span>
+      and the corresponding <span><strong class="command">controls</strong></span>
+      and <span><strong class="command">key</strong></span>
       statements in <code class="filename">named.conf</code> by hand.
-      Alternatively, it can be run with the <span class="command"><strong>-a</strong></span>
+      Alternatively, it can be run with the <span><strong class="command">-a</strong></span>
       option to set up a <code class="filename">rndc.key</code> file and
       avoid the need for a <code class="filename">rndc.conf</code> file
-      and a <span class="command"><strong>controls</strong></span> statement altogether.
+      and a <span><strong class="command">controls</strong></span> statement altogether.
     </p>
-
-  </div>
-
-  <div class="refsection">
-<a name="id-1.8"></a><h2>OPTIONS</h2>
-
-
-    <div class="variablelist"><dl class="variablelist">
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543477"></a><h2>OPTIONS</h2>
+<div class="variablelist"><dl>
 <dt><span class="term">-a</span></dt>
 <dd>
-          <p>
-            Do automatic <span class="command"><strong>rndc</strong></span> configuration.
+<p>
+            Do automatic <span><strong class="command">rndc</strong></span> configuration.
             This creates a file <code class="filename">rndc.key</code>
             in <code class="filename">/etc</code> (or whatever
             <code class="varname">sysconfdir</code>
             was specified as when <acronym class="acronym">BIND</acronym> was
             built)
-            that is read by both <span class="command"><strong>rndc</strong></span>
-            and <span class="command"><strong>named</strong></span> on startup.  The
+            that is read by both <span><strong class="command">rndc</strong></span>
+            and <span><strong class="command">named</strong></span> on startup.  The
             <code class="filename">rndc.key</code> file defines a default
             command channel and authentication key allowing
-            <span class="command"><strong>rndc</strong></span> to communicate with
-            <span class="command"><strong>named</strong></span> on the local host
+            <span><strong class="command">rndc</strong></span> to communicate with
+            <span><strong class="command">named</strong></span> on the local host
             with no further configuration.
           </p>
-          <p>
-            Running <span class="command"><strong>rndc-confgen -a</strong></span> allows
-            BIND 9 and <span class="command"><strong>rndc</strong></span> to be used as
+<p>
+            Running <span><strong class="command">rndc-confgen -a</strong></span> allows
+            BIND 9 and <span><strong class="command">rndc</strong></span> to be used as
             drop-in
-            replacements for BIND 8 and <span class="command"><strong>ndc</strong></span>,
+            replacements for BIND 8 and <span><strong class="command">ndc</strong></span>,
             with no changes to the existing BIND 8
             <code class="filename">named.conf</code> file.
           </p>
-          <p>
+<p>
             If a more elaborate configuration than that
-            generated by <span class="command"><strong>rndc-confgen -a</strong></span>
+            generated by <span><strong class="command">rndc-confgen -a</strong></span>
             is required, for example if rndc is to be used remotely,
-            you should run <span class="command"><strong>rndc-confgen</strong></span> without
+            you should run <span><strong class="command">rndc-confgen</strong></span> without
             the
-            <span class="command"><strong>-a</strong></span> option and set up a
+            <span><strong class="command">-a</strong></span> option and set up a
             <code class="filename">rndc.conf</code> and
             <code class="filename">named.conf</code>
             as directed.
           </p>
-        </dd>
-<dt><span class="term">-A <em class="replaceable"><code>algorithm</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the algorithm to use for the TSIG key.  Available
-            choices are: hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
-            hmac-sha384 and hmac-sha512.  The default is hmac-md5 or
-            if MD5 was disabled hmac-sha256.
-          </p>
-        </dd>
+</dd>
 <dt><span class="term">-b <em class="replaceable"><code>keysize</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specifies the size of the authentication key in bits.
-            Must be between 1 and 512 bits; the default is the
-            hash size.
-          </p>
-        </dd>
+            Must be between 1 and 512 bits; the default is 128.
+          </p></dd>
 <dt><span class="term">-c <em class="replaceable"><code>keyfile</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to specify
+<dd><p>
+            Used with the <span><strong class="command">-a</strong></span> option to specify
             an alternate location for <code class="filename">rndc.key</code>.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-h</span></dt>
-<dd>
-          <p>
+<dd><p>
             Prints a short summary of the options and arguments to
-            <span class="command"><strong>rndc-confgen</strong></span>.
-          </p>
-        </dd>
+            <span><strong class="command">rndc-confgen</strong></span>.
+          </p></dd>
 <dt><span class="term">-k <em class="replaceable"><code>keyname</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specifies the key name of the rndc authentication key.
             This must be a valid domain name.
             The default is <code class="constant">rndc-key</code>.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-p <em class="replaceable"><code>port</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the command channel port where <span class="command"><strong>named</strong></span>
-            listens for connections from <span class="command"><strong>rndc</strong></span>.
+<dd><p>
+            Specifies the command channel port where <span><strong class="command">named</strong></span>
+            listens for connections from <span><strong class="command">rndc</strong></span>.
             The default is 953.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-r <em class="replaceable"><code>randomfile</code></em></span></dt>
-<dd>
-          <p>
+<dd><p>
             Specifies a source of random data for generating the
             authorization.  If the operating
             system does not provide a <code class="filename">/dev/random</code>
@@ -176,76 +126,63 @@
             data to be used instead of the default.  The special value
             <code class="filename">keyboard</code> indicates that keyboard
             input should be used.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-s <em class="replaceable"><code>address</code></em></span></dt>
-<dd>
-          <p>
-            Specifies the IP address where <span class="command"><strong>named</strong></span>
+<dd><p>
+            Specifies the IP address where <span><strong class="command">named</strong></span>
             listens for command channel connections from
-            <span class="command"><strong>rndc</strong></span>.  The default is the loopback
+            <span><strong class="command">rndc</strong></span>.  The default is the loopback
             address 127.0.0.1.
-          </p>
-        </dd>
+          </p></dd>
 <dt><span class="term">-t <em class="replaceable"><code>chrootdir</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to specify
-            a directory where <span class="command"><strong>named</strong></span> will run
+<dd><p>
+            Used with the <span><strong class="command">-a</strong></span> option to specify
+            a directory where <span><strong class="command">named</strong></span> will run
             chrooted.  An additional copy of the <code class="filename">rndc.key</code>
             will be written relative to this directory so that
-            it will be found by the chrooted <span class="command"><strong>named</strong></span>.
-          </p>
-        </dd>
+            it will be found by the chrooted <span><strong class="command">named</strong></span>.
+          </p></dd>
 <dt><span class="term">-u <em class="replaceable"><code>user</code></em></span></dt>
-<dd>
-          <p>
-            Used with the <span class="command"><strong>-a</strong></span> option to set the
+<dd><p>
+            Used with the <span><strong class="command">-a</strong></span> option to set the
             owner
             of the <code class="filename">rndc.key</code> file generated.
             If
-            <span class="command"><strong>-t</strong></span> is also specified only the file
+            <span><strong class="command">-t</strong></span> is also specified only the file
             in
             the chroot area has its owner changed.
-          </p>
-        </dd>
+          </p></dd>
 </dl></div>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.9"></a><h2>EXAMPLES</h2>
-
-    <p>
-      To allow <span class="command"><strong>rndc</strong></span> to be used with
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543790"></a><h2>EXAMPLES</h2>
+<p>
+      To allow <span><strong class="command">rndc</strong></span> to be used with
       no manual configuration, run
     </p>
-    <p><strong class="userinput"><code>rndc-confgen -a</code></strong>
+<p><strong class="userinput"><code>rndc-confgen -a</code></strong>
     </p>
-    <p>
+<p>
       To print a sample <code class="filename">rndc.conf</code> file and
-      corresponding <span class="command"><strong>controls</strong></span> and <span class="command"><strong>key</strong></span>
+      corresponding <span><strong class="command">controls</strong></span> and <span><strong class="command">key</strong></span>
       statements to be manually inserted into <code class="filename">named.conf</code>,
       run
     </p>
-    <p><strong class="userinput"><code>rndc-confgen</code></strong>
+<p><strong class="userinput"><code>rndc-confgen</code></strong>
     </p>
-  </div>
-
-  <div class="refsection">
-<a name="id-1.10"></a><h2>SEE ALSO</h2>
-
-    <p><span class="citerefentry">
-        <span class="refentrytitle">rndc</span>(8)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">rndc.conf</span>(5)
-      </span>,
-      <span class="citerefentry">
-        <span class="refentrytitle">named</span>(8)
-      </span>,
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543832"></a><h2>SEE ALSO</h2>
+<p><span class="citerefentry"><span class="refentrytitle">rndc</span>(8)</span>,
+      <span class="citerefentry"><span class="refentrytitle">rndc.conf</span>(5)</span>,
+      <span class="citerefentry"><span class="refentrytitle">named</span>(8)</span>,
       <em class="citetitle">BIND 9 Administrator Reference Manual</em>.
     </p>
-  </div>
-
+</div>
+<div class="refsect1" lang="en">
+<a name="id2543870"></a><h2>AUTHOR</h2>
+<p><span class="corpauthor">Internet Systems Consortium</span>
+    </p>
+</div>
 </div></body>
 </html>

bin/confgen/unix/.cvsignore

@@ -0,0 +1 @@
+Makefile

bin/confgen/unix/Makefile.in

@@ -1,4 +1,4 @@
-# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+# Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
 #
 # Permission to use, copy, modify, and/or distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above

bin/confgen/unix/os.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above

bin/confgen/util.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -25,7 +25,6 @@
 #include <stdio.h>
 
 #include <isc/boolean.h>
-#include <isc/print.h>
 
 #include "util.h"
 

bin/confgen/util.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above

bin/confgen/win32/confgentool.dsp

@@ -0,0 +1,135 @@
+# Microsoft Developer Studio Project File - Name="confgentool" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static-Link Library" 0x0104
+
+CFG=confgentool - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "confgentool.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "confgentool.mak" CFG="confgentool - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "confgentool - Win32 Release" (based on "Win32 (x86) Static-Link Library")
+!MESSAGE "confgentool - Win32 Debug" (based on "Win32 (x86) Static-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "confgentool - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /YX /FD /c /Fdconfgentool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /out:"Release/confgentool.lib"
+LIB32=lib.exe
+# ADD BASE LIB32
+# ADD LIB32 /out:"Release/confgentool.lib"
+
+!ELSEIF  "$(CFG)" == "confgentool - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR /YX /FD /GZ /c /Fdconfgentool
+# SUBTRACT CPP /X
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 
+# ADD LINK32 /debug /out:"Debug/confgentool.lib"
+LIB32=lib.exe
+# ADD BASE LIB32
+# ADD LIB32 /out:"Debug/confgentool.lib"
+
+!ENDIF 
+
+# Begin Target
+
+# Name "confgentool - Win32 Release"
+# Name "confgentool - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\keygen.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\util.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# Begin Group "Main Dns Lib"
+
+# PROP Default_Filter "c"
+# Begin Source File
+
+SOURCE=..\keygen.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\util.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\os.c
+# End Source File
+# End Group
+# End Target
+# End Project

bin/confgen/win32/confgentool.dsp.in

@@ -1,135 +0,0 @@
-# Microsoft Developer Studio Project File - Name="confgentool" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Static-Link Library" 0x0104
-
-CFG=confgentool - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "confgentool.mak" CFG="confgentool - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "confgentool - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE "confgentool - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Static-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "confgentool - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" @COPTY@ /FD /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /out:"Release/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Release/confgentool.lib"
-
-!ELSEIF  "$(CFG)" == "confgentool - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "__STDC__" /D "_MBCS" /FR @COPTY@ /FD /GZ /c /Fdconfgentool
-# SUBTRACT CPP /X
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 
-# ADD LINK32 /debug /out:"Debug/confgentool.lib"
-LIB32=lib.exe
-# ADD BASE LIB32
-# ADD LIB32 /out:"Debug/confgentool.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "confgentool - @PLATFORM@ Release"
-# Name "confgentool - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\keygen.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Group "Main Dns Lib"
-
-# PROP Default_Filter "c"
-# Begin Source File
-
-SOURCE=..\keygen.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\util.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\os.c
-# End Source File
-# End Group
-# End Target
-# End Project

bin/confgen/win32/confgentool.vcxproj.filters.in

@@ -1,39 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Header Files">
-      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
-      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClInclude Include="..\keygen.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-    <ClInclude Include="..\util.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-    <ClInclude Include="..\include\confgen\os.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\keygen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="..\util.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="os.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/confgentool.vcxproj.in

@@ -1,111 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{64964B03-4815-41F0-9057-E766A94AF197}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>confgentool</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>StaticLibrary</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>.\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>.\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(TargetName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <LinkTimeCodeGeneration>false</LinkTimeCodeGeneration>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClInclude Include="..\include\confgen\os.h" />
-    <ClInclude Include="..\keygen.h" />
-    <ClInclude Include="..\util.h" />
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\keygen.c" />
-    <ClCompile Include="..\util.c" />
-    <ClCompile Include="os.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/confgentool.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/confgen/win32/ddnsconfgen.dsp

@@ -0,0 +1,103 @@
+# Microsoft Developer Studio Project File - Name="ddnsconfgen" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=ddnsconfgen - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "ddnsconfgen.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "ddnsconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "ddnsconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/ddns-confgen.exe"
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "ddnsconfgen - Win32 Release"
+# Name "ddnsconfgen - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\ddns-confgen.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/confgen/win32/ddnsconfgen.dsp.in

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="ddnsconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=ddnsconfgen - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "ddnsconfgen - @PLATFORM@ Release"
-# Name "ddnsconfgen - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\ddns-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/ddnsconfgen.mak

@@ -0,0 +1,337 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on ddnsconfgen.dsp
+!IF "$(CFG)" == ""
+CFG=ddnsconfgen - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to ddnsconfgen - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "ddnsconfgen - Win32 Release" && "$(CFG)" != "ddnsconfgen - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "ddnsconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "ddnsconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+ALL : "..\..\..\Build\Release\ddns-confgen.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\ddns-confgen.obj"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\ddns-confgen.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\ddnsconfgen.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\ddns-confgen.pdb" /machine:I386 /out:"../../../Build/Release/ddns-confgen.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\ddns-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Release\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "..\..\..\Build\Debug\ddns-confgen.exe" "$(OUTDIR)\ddnsconfgen.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\os.sbr"
+	-@erase "$(INTDIR)\ddns-confgen.obj"
+	-@erase "$(INTDIR)\ddns-confgen.sbr"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\keygen.sbr"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\util.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\ddnsconfgen.bsc"
+	-@erase "$(OUTDIR)\ddns-confgen.pdb"
+	-@erase "..\..\..\Build\Debug\ddns-confgen.exe"
+	-@erase "..\..\..\Build\Debug\ddns-confgen.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\os.sbr" \
+	"$(INTDIR)\ddns-confgen.sbr" \
+	"$(INTDIR)\keygen.sbr" \
+	"$(INTDIR)\util.sbr"
+
+"$(OUTDIR)\ddnsconfgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\ddns-confgen.pdb" /debug /machine:I386 /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\ddns-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Debug\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("ddnsconfgen.dep")
+!INCLUDE "ddnsconfgen.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "ddnsconfgen.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "ddnsconfgen - Win32 Release" || "$(CFG)" == "ddnsconfgen - Win32 Debug"
+SOURCE=.\os.c
+
+!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
+
+
+"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
+
+
+"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
+
+
+!ENDIF 
+
+SOURCE="..\ddns-confgen.c"
+
+!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
+
+
+"$(INTDIR)\ddns-confgen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
+
+
+"$(INTDIR)\ddns-confgen.obj"	"$(INTDIR)\ddns-confgen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\keygen.c
+
+!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
+
+
+"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
+
+
+"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\util.c
+
+!IF  "$(CFG)" == "ddnsconfgen - Win32 Release"
+
+
+"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "ddnsconfgen - Win32 Debug"
+
+
+"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/confgen/win32/ddnsconfgen.mak.in

@@ -1,337 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on ddnsconfgen.dsp
-!IF "$(CFG)" == ""
-CFG=ddnsconfgen - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to ddnsconfgen - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "ddnsconfgen - @PLATFORM@ Release" && "$(CFG)" != "ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "ddnsconfgen.mak" CFG="ddnsconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "ddnsconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "ddnsconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\ddns-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\ddns-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\ddnsconfgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\ddns-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/ddns-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\ddns-confgen.exe" "$(OUTDIR)\ddnsconfgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\ddns-confgen.obj"
-	-@erase "$(INTDIR)\ddns-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\ddnsconfgen.bsc"
-	-@erase "$(OUTDIR)\ddns-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.exe"
-	-@erase "..\..\..\Build\Debug\ddns-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\ddnsconfgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\ddns-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\ddnsconfgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\ddns-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/ddns-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\ddns-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\ddns-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("ddnsconfgen.dep")
-!INCLUDE "ddnsconfgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "ddnsconfgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release" || "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\ddns-confgen.c"
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\ddns-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\ddns-confgen.obj"	"$(INTDIR)\ddns-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "ddnsconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/ddnsconfgen.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\ddns-confgen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.in

@@ -1,123 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{1EA4FC64-F33B-4A50-970A-EA052BBE9CF1}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>ddnsconfgen</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>ddns-confgen</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>ddns-confgen</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y ddns-confgen.exe tsig-keygen.exe
-copy /Y ddns-confgen.ilk tsig-keygen.ilk
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-    <PostBuildEvent>
-      <Command>cd ..\..\..\Build\$(Configuration)
-copy /Y ddns-confgen.exe tsig-keygen.exe
-</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClCompile Include="..\ddns-confgen.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

bin/confgen/win32/ddnsconfgen.vcxproj.user

@@ -1,3 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-</Project>

bin/confgen/win32/os.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ * Copyright (C) 2009  Internet Systems Consortium, Inc. ("ISC")
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above

bin/confgen/win32/rndcconfgen.dsp

@@ -0,0 +1,103 @@
+# Microsoft Developer Studio Project File - Name="rndcconfgen" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=rndcconfgen - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "rndcconfgen.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "rndcconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "rndcconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /machine:I386 /out:"../../../Build/Release/rndc-confgen.exe"
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
+# SUBTRACT CPP /X /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug /machine:I386 /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "rndcconfgen - Win32 Release"
+# Name "rndcconfgen - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE="..\rndc-confgen.c"
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

bin/confgen/win32/rndcconfgen.dsp.in

@@ -1,103 +0,0 @@
-# Microsoft Developer Studio Project File - Name="rndcconfgen" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "@PLATFORM@ (x86) Console Application" 0x0103
-
-CFG=rndcconfgen - @PLATFORM@ Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 @COPTX@ @COPTI@ /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD CPP /nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console @MACHINE@
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Release/confgentool.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe"
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" @COPTY@ /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /GZ /c
-# SUBTRACT CPP /X @COPTY@
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug @MACHINE@ /pdbtype:sept
-# ADD LINK32 user32.lib advapi32.lib ws2_32.lib Debug/confgentool.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "rndcconfgen - @PLATFORM@ Release"
-# Name "rndcconfgen - @PLATFORM@ Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE="..\rndc-confgen.c"
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

bin/confgen/win32/rndcconfgen.mak

@@ -0,0 +1,336 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on confgen.dsp
+!IF "$(CFG)" == ""
+CFG=rndcconfgen - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to rndcconfgen - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "rndcconfgen - Win32 Release" && "$(CFG)" != "rndcconfgen - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "rndcconfgen - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "rndcconfgen - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
+_VC_MANIFEST_INC=0
+_VC_MANIFEST_BASENAME=__VC80
+!ELSE
+_VC_MANIFEST_INC=1
+_VC_MANIFEST_BASENAME=__VC80.Debug
+!ENDIF
+
+####################################################
+# Specifying name of temporary resource file used only in incremental builds:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
+!else
+_VC_MANIFEST_AUTO_RES=
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
+
+!endif
+
+####################################################
+# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+#MT_SPECIAL_RETURN=1090650113
+#MT_SPECIAL_SWITCH=-notify_resource_update
+MT_SPECIAL_RETURN=0
+MT_SPECIAL_SWITCH=
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
+if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
+rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
+link $** /out:$@ $(LFLAGS)
+
+!else
+
+_VC_MANIFEST_EMBED_EXE= \
+if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
+
+!endif
+####################################################
+# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
+
+!if "$(_VC_MANIFEST_INC)" == "1"
+
+_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
+    $(_VC_MANIFEST_BASENAME).auto.rc \
+    $(_VC_MANIFEST_BASENAME).auto.manifest
+
+!else
+
+_VC_MANIFEST_CLEAN=
+
+!endif
+
+!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+
+ALL : "..\..\..\Build\Release\rndc-confgen.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\rndc-confgen.obj"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "..\..\..\Build\Release\rndc-confgen.exe"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MD /W3 /GX /O2 /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\confgen.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rndc-confgen.pdb" /machine:I386 /out:"../../../Build/Release/rndc-confgen.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\rndc-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Release\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "..\..\..\Build\Debug\rndc-confgen.exe" "$(OUTDIR)\confgen.bsc"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\os.obj"
+	-@erase "$(INTDIR)\os.sbr"
+	-@erase "$(INTDIR)\rndc-confgen.obj"
+	-@erase "$(INTDIR)\rndc-confgen.sbr"
+	-@erase "$(INTDIR)\keygen.obj"
+	-@erase "$(INTDIR)\keygen.sbr"
+	-@erase "$(INTDIR)\util.obj"
+	-@erase "$(INTDIR)\util.sbr"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\confgen.bsc"
+	-@erase "$(OUTDIR)\rndc-confgen.pdb"
+	-@erase "..\..\..\Build\Debug\rndc-confgen.exe"
+	-@erase "..\..\..\Build\Debug\rndc-confgen.ilk"
+	-@$(_VC_MANIFEST_CLEAN)
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP_PROJ=/nologo /MDd /W3 /Gm /GX /ZI /Od /I "./" /I "../../../" /I "../../../../libxml2-2.7.3/include" /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/isc/noatomic/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
+BSC32_SBRS= \
+	"$(INTDIR)\os.sbr" \
+	"$(INTDIR)\rndc-confgen.sbr" \
+	"$(INTDIR)\keygen.sbr" \
+	"$(INTDIR)\util.sbr"
+
+"$(OUTDIR)\confgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
+    $(BSC32) @<<
+  $(BSC32_FLAGS) $(BSC32_SBRS)
+<<
+
+LINK32=link.exe
+LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\rndc-confgen.pdb" /debug /machine:I386 /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\os.obj" \
+	"$(INTDIR)\rndc-confgen.obj" \
+	"$(INTDIR)\keygen.obj" \
+	"$(INTDIR)\util.obj"
+
+"..\..\..\Build\Debug\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+    $(_VC_MANIFEST_EMBED_EXE)
+
+!ENDIF 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("confgen.dep")
+!INCLUDE "confgen.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "confgen.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "rndcconfgen - Win32 Release" || "$(CFG)" == "rndcconfgen - Win32 Debug"
+SOURCE=.\os.c
+
+!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
+
+
+"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
+
+
+"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
+
+
+!ENDIF 
+
+SOURCE="..\rndc-confgen.c"
+
+!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
+
+
+"$(INTDIR)\rndc-confgen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
+
+
+"$(INTDIR)\rndc-confgen.obj"	"$(INTDIR)\rndc-confgen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\keygen.c
+
+!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
+
+
+"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
+
+
+"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+SOURCE=..\util.c
+
+!IF  "$(CFG)" == "rndcconfgen - Win32 Release"
+
+
+"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ELSEIF  "$(CFG)" == "rndcconfgen - Win32 Debug"
+
+
+"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
+	$(CPP) $(CPP_PROJ) $(SOURCE)
+
+
+!ENDIF 
+
+!ENDIF 
+
+####################################################
+# Commands to generate initial empty manifest file and the RC file
+# that references it, and for generating the .res file:
+
+$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
+
+$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
+    type <<$@
+#include <winuser.h>
+1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
+<< KEEP
+
+$(_VC_MANIFEST_BASENAME).auto.manifest :
+    type <<$@
+<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
+<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
+</assembly>
+<< KEEP

bin/confgen/win32/rndcconfgen.mak.in

@@ -1,336 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on confgen.dsp
-!IF "$(CFG)" == ""
-CFG=rndcconfgen - @PLATFORM@ Debug
-!MESSAGE No configuration specified. Defaulting to rndcconfgen - @PLATFORM@ Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "rndcconfgen - @PLATFORM@ Release" && "$(CFG)" != "rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "rndcconfgen.mak" CFG="rndcconfgen - @PLATFORM@ Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "rndcconfgen - @PLATFORM@ Release" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE "rndcconfgen - @PLATFORM@ Debug" (based on "@PLATFORM@ (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-_VC_MANIFEST_INC=0
-_VC_MANIFEST_BASENAME=__VC80
-!ELSE
-_VC_MANIFEST_INC=1
-_VC_MANIFEST_BASENAME=__VC80.Debug
-!ENDIF
-
-####################################################
-# Specifying name of temporary resource file used only in incremental builds:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-_VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res
-!else
-_VC_MANIFEST_AUTO_RES=
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_EXE - command to embed manifest in EXE:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1
-
-!endif
-
-####################################################
-# _VC_MANIFEST_EMBED_DLL - command to embed manifest in DLL:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-#MT_SPECIAL_RETURN=1090650113
-#MT_SPECIAL_SWITCH=-notify_resource_update
-MT_SPECIAL_RETURN=0
-MT_SPECIAL_SWITCH=
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \
-if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \
-rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \
-link $** /out:$@ $(LFLAGS)
-
-!else
-
-_VC_MANIFEST_EMBED_EXE= \
-if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2
-
-!endif
-####################################################
-# _VC_MANIFEST_CLEAN - command to clean resources files generated temporarily:
-
-!if "$(_VC_MANIFEST_INC)" == "1"
-
-_VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \
-    $(_VC_MANIFEST_BASENAME).auto.rc \
-    $(_VC_MANIFEST_BASENAME).auto.manifest
-
-!else
-
-_VC_MANIFEST_CLEAN=
-
-!endif
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "..\..\..\Build\Release\rndc-confgen.exe"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "..\..\..\Build\Release\rndc-confgen.exe"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MD /W3 @COPTX@ @COPTI@ /O2 /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "NDEBUG" /D "__STDC__" /D "_CONSOLE" /D "_MBCS" /Fp"$(INTDIR)\confgen.pch" @COPTY@ /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Release/libisc.lib ../../../lib/dns/win32/Release/libdns.lib ../../../lib/isccfg/win32/Release/libisccfg.lib ../../../lib/isccc/win32/Release/libisccc.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rndc-confgen.pdb" @MACHINE@ /out:"../../../Build/Release/rndc-confgen.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Release\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-ALL : "..\..\..\Build\Debug\rndc-confgen.exe" "$(OUTDIR)\confgen.bsc"
-
-
-CLEAN :
-	-@erase "$(INTDIR)\os.obj"
-	-@erase "$(INTDIR)\os.sbr"
-	-@erase "$(INTDIR)\rndc-confgen.obj"
-	-@erase "$(INTDIR)\rndc-confgen.sbr"
-	-@erase "$(INTDIR)\keygen.obj"
-	-@erase "$(INTDIR)\keygen.sbr"
-	-@erase "$(INTDIR)\util.obj"
-	-@erase "$(INTDIR)\util.sbr"
-	-@erase "$(INTDIR)\vc60.idb"
-	-@erase "$(INTDIR)\vc60.pdb"
-	-@erase "$(OUTDIR)\confgen.bsc"
-	-@erase "$(OUTDIR)\rndc-confgen.pdb"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.exe"
-	-@erase "..\..\..\Build\Debug\rndc-confgen.ilk"
-	-@$(_VC_MANIFEST_CLEAN)
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MDd /W3 /Gm @COPTX@ @COPTI@ /ZI /Od /I "./" /I "../../../" @LIBXML2_INC@ /I "../include" /I "../../../lib/isc/win32" /I "../../../lib/isc/win32/include" /I "../../../lib/isc/include" /I "../../../lib/dns/win32/include" /I "../../../lib/dns/include" /I "../../../lib/isccc/include" /I "../../../lib/isccfg/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\confgen.bsc" 
-BSC32_SBRS= \
-	"$(INTDIR)\os.sbr" \
-	"$(INTDIR)\rndc-confgen.sbr" \
-	"$(INTDIR)\keygen.sbr" \
-	"$(INTDIR)\util.sbr"
-
-"$(OUTDIR)\confgen.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
-    $(BSC32) @<<
-  $(BSC32_FLAGS) $(BSC32_SBRS)
-<<
-
-LINK32=link.exe
-LINK32_FLAGS=user32.lib advapi32.lib ws2_32.lib ../../../lib/isc/win32/Debug/libisc.lib ../../../lib/dns/win32/Debug/libdns.lib ../../../lib/isccfg/win32/Debug/libisccfg.lib ../../../lib/isccc/win32/Debug/libisccc.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\rndc-confgen.pdb" /debug @MACHINE@ /out:"../../../Build/Debug/rndc-confgen.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	"$(INTDIR)\os.obj" \
-	"$(INTDIR)\rndc-confgen.obj" \
-	"$(INTDIR)\keygen.obj" \
-	"$(INTDIR)\util.obj"
-
-"..\..\..\Build\Debug\rndc-confgen.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-    $(_VC_MANIFEST_EMBED_EXE)
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("confgen.dep")
-!INCLUDE "confgen.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "confgen.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "rndcconfgen - @PLATFORM@ Release" || "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-SOURCE=.\os.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\os.obj" : $(SOURCE) "$(INTDIR)"
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\os.obj"	"$(INTDIR)\os.sbr" : $(SOURCE) "$(INTDIR)"
-
-
-!ENDIF 
-
-SOURCE="..\rndc-confgen.c"
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\rndc-confgen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\rndc-confgen.obj"	"$(INTDIR)\rndc-confgen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\keygen.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\keygen.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\keygen.obj"	"$(INTDIR)\keygen.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-SOURCE=..\util.c
-
-!IF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Release"
-
-
-"$(INTDIR)\util.obj" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ELSEIF  "$(CFG)" == "rndcconfgen - @PLATFORM@ Debug"
-
-
-"$(INTDIR)\util.obj"	"$(INTDIR)\util.sbr" : $(SOURCE) "$(INTDIR)"
-	$(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!ENDIF 
-
-!ENDIF 
-
-####################################################
-# Commands to generate initial empty manifest file and the RC file
-# that references it, and for generating the .res file:
-
-$(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc
-
-$(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest
-    type <<$@
-#include <winuser.h>
-1RT_MANIFEST"$(_VC_MANIFEST_BASENAME).auto.manifest"
-<< KEEP
-
-$(_VC_MANIFEST_BASENAME).auto.manifest :
-    type <<$@
-<?xml version='1.0' encoding='UTF-8' standalone='yes'?>
-<assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>
-</assembly>
-<< KEEP

bin/confgen/win32/rndcconfgen.vcxproj.filters.in

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup>
-    <Filter Include="Source Files">
-      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
-      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
-    </Filter>
-    <Filter Include="Resource Files">
-      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
-      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
-    </Filter>
-  </ItemGroup>
-  <ItemGroup>
-    <ClCompile Include="..\rndc-confgen.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-  </ItemGroup>
-</Project>

bin/confgen/win32/rndcconfgen.vcxproj.in

@@ -1,112 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@PLATFORM@">
-      <Configuration>Debug</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|@PLATFORM@">
-      <Configuration>Release</Configuration>
-      <Platform>@PLATFORM@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{1E2C1635-3093-4D59-80E7-4743AC10F22F}</ProjectGuid>
-    <Keyword>Win32Proj</Keyword>
-    <RootNamespace>rndcconfgen</RootNamespace>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>true</UseDebugLibraries>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    <UseDebugLibraries>false</UseDebugLibraries>
-    <WholeProgramOptimization>true</WholeProgramOptimization>
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <LinkIncremental>true</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>rndc-confgen</TargetName>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <LinkIncremental>false</LinkIncremental>
-    <OutDir>..\..\..\Build\$(Configuration)\</OutDir>
-    <IntDir>.\$(Configuration)\</IntDir>
-    <TargetName>rndc-confgen</TargetName>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@PLATFORM@'">
-    <ClCompile>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>Level3</WarningLevel>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <BrowseInformation>true</BrowseInformation>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|@PLATFORM@'">
-    <ClCompile>
-      <WarningLevel>Level3</WarningLevel>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <Optimization>MaxSpeed</Optimization>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <IntrinsicFunctions>@INTRINSIC@</IntrinsicFunctions>
-      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <WholeProgramOptimization>false</WholeProgramOptimization>
-      <StringPooling>true</StringPooling>
-      <PrecompiledHeaderOutputFile>.\$(Configuration)\$(ProjectName).pch</PrecompiledHeaderOutputFile>
-      <AssemblerListingLocation>.\$(Configuration)\</AssemblerListingLocation>
-      <ObjectFileName>.\$(Configuration)\</ObjectFileName>
-      <ProgramDataBaseFileName>$(OutDir)$(TargetName).pdb</ProgramDataBaseFileName>
-      <AdditionalIncludeDirectories>.\;..\..\..\;@LIBXML2_INC@..\include;..\..\..\lib\isc\win32;..\..\..\lib\isc\win32\include;..\..\..\lib\isc\include;..\..\..\lib\dns\include;..\..\..\lib\isccc\include;..\..\..\lib\isccfg\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <CompileAs>CompileAsC</CompileAs>
-    </ClCompile>
-    <Link>
-      <SubSystem>Console</SubSystem>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <EnableCOMDATFolding>true</EnableCOMDATFolding>
-      <OptimizeReferences>true</OptimizeReferences>
-      <OutputFile>..\..\..\Build\$(Configuration)\$(TargetName)$(TargetExt)</OutputFile>
-      <LinkTimeCodeGeneration>Default</LinkTimeCodeGeneration>
-      <AdditionalLibraryDirectories>$(Configuration);..\..\..\lib\isc\win32\$(Configuration);..\..\..\lib\dns\win32\$(Configuration);..\..\..\lib\isccfg\win32\$(Configuration);..\..\..\lib\isccc\win32\$(Configuration);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <AdditionalDependencies>confgentool.lib;libisc.lib;libdns.lib;libisccfg.lib;libisccc.lib;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClCompile Include="..\rndc-confgen.c" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>