The support for stat.pl's --restart option was incomplete in run.sh.
This change makes sure it's handled properly and that named.run file is
not being removed by clean.sh when the --restart option is used.
(cherry picked from commit a39697635b)
When named failed to start and produced core dump, the core file wasn't
processed by GDB because of run.sh script exiting immediately. This
remedies the limitation, simplifies the surrounding code, and makes the
script shellcheck clean.
(cherry picked from commit bc097d3358)
Extend the "chain" system test with AUTHORITY section checks for signed,
secure delegations. This complements the checks for signed, insecure
delegations added by commit 82b7e6ccef.
Extend the existing AUTHORITY section checks for signed, insecure
delegations to ensure nonexistence of DS RRsets in such responses.
Adjust comments accordingly.
Ensure dig failures cause the "chain" system test to fail.
(cherry picked from commit a14efdf54c)
Add tests to the nsupdate system test to make sure that CDS and/or
CDNSKEY that match an algorithm in the DNSKEY RRset are allowed. Also
add tests that updates are rejected if the algorithm does not match.
Remove the now redundant test cases from the dnssec system test.
Update the checkzone system test: Change the algorithm of the CDS and
CDNSKEY records so that the zone is still rejected.
(cherry picked from commit 6b79db1fdd)
As we don't set the thread affinity, the cpu test would consistently
fail. Disable it, but don't remove it as we might restore setting the
affinity in the future versions of BIND 9.
(cherry picked from commit 4c5dc1904b)
if a control channel listener was configured with more than one
key algorithm, message verification would be attempted with each
algorithm in turn. if the first key failed due to the wrong
signature length, the entire verification process was aborted,
rather than continuing on to try with another key.
(cherry picked from commit 841b557df8)
The function 'private_type_record()' is now used in multiple system
setup scripts and should be moved to the common configuration script
conf.sh.common.
(cherry picked from commit c92128eada)
Similar to "notify-source" and "transfer-source", add options to
set the source address when querying parental agents for DS records.
(manually picked from commit 2872d6a12e)
Add a Pytest based system test for the 'checkds' feature. There is
one nameserver (ns9, because it should be started the latest) that
has configured several zones with dnssec-policy. The zones are set
in such a state that they are waiting for DS publication or DS
withdrawal.
Then several other name servers act as parent servers that either have
the DS for these published, or not. Also one server in the mix is
to test a badly configured parental-agent.
There are tests for DS publication, DS publication error handling,
DS withdrawal and DS withdrawal error handling.
The tests ensures that the zone is DNSSEC valid, and that the
DSPublish/DSRemoved key metadata is set (or not in case of the error
handling).
It does not test if the rollover continues, this is already tested in
the kasp system test (that uses 'rndc -dnssec checkds' to set the
DSPublish/DSRemoved key metadata).
(manually picked from commit 56262db9cd)
There is a checkds system test in v9_16 that does not exist in the
main branch. This existing checkds system test checks the behaviour of
the dnssec-checkds tool. Before backporting the new checkds system
test, that tests the feature where BIND checks periodically the
parental agents if the DS for a given KSK has been published, move the
existing checkds system test to checkdstool.
Add checks for "parental-agents" configuration, checking for the option
being at wrong type of zone (only allowed for primaries and
secondaries), duplicate definitions, duplicate references, and
undefined parental clauses (the name referenced in the zone clause
does not have a matching "parental-agent" clause).
(cherry picked from commit 1e763e582b)
Introduce a way to configure parental agents that can be used to
query DS records to be used in automatic key rollovers.
(manually picked from commit 0311705d4b)
When performing the 'setnsec3param' task, zones that are not loaded
will have their task rescheduled. We should do this only if the zone
load is still pending, this prevents zones that failed to load get
stuck in a busy wait and causing a hang on shutdown.
(cherry picked from commit 10055d44e3)
Add a zone to the configuration file that uses NSEC3 with dnssec-policy
and fails to load. This will cause setnsec3param to go into a busy wait
and will cause a hang on shutdown.
(cherry picked from commit 3631a23c7f)
This check intermittently failed:
I:serve-stale:check not in cache longttl.example times out...
I:serve-stale:failed
This corresponds to this query in the test:
$DIG -p ${PORT} +tries=1 +timeout=3 @10.53.0.3 longttl.example TXT
Looking at the dig output for a failed test, the query actually got a
response from the authoritative server (in one specific example the
query time was 2991 msec, close to 3 seconds).
After doing the query for the test, we enable the authoritative
server after a sleep of three seconds. If we bump this sleep to 4
seconds, the race will be more in favor of the query timing out,
making it unlikely that this test will fail intermittently.
Bump the subsequent wait_for_log checks also with one second.
(cherry picked from commit 05e73a24f0)
Add three more test cases that detect a configuration error if the
key-directory is inherited but has the same value for a zone in a
different view with a deviating DNSSEC policy.
(cherry picked from commit 84cfd95e95722191195cd4b09ce6f19960868597)
The timeout originally picked for "rndc status" invocations (2 seconds)
in the test attempting to reproduce a deadlock caused by running
multiple "rndc addzone", "rndc modzone", and "rndc delzone" commands
concurrently causes intermittent failures of the "addzone" system test
in GitLab CI. Increase the timeout to 10 seconds to make such failures
less probable. Adjust code comments accordingly.
(cherry picked from commit ac4c58e8ce)
Add a set of system tests which check the contents of the AUTHORITY
section for signed, insecure delegation responses constructed from CNAME
records and wildcards, both for zones using NSEC and NSEC3.
(cherry picked from commit 26ec4b9a89)
Add a test case where 'named' is restarted and ensure that an already
signed zone does not change its NSEC3 parameters.
The test case first tests the current zone and saves the used salt
value. Then after restart it checks if the salt (and other parameters)
are the same as before the restart.
This test case changes 'set_nsec3param'. This will now reset the salt
value, and when checking for NSEC3PARAM we will store the salt and
use it when testing the NXDOMAIN response. This does mean that for
every test case we now have to call 'set_nsec3param' explicitly (and
can not omit it because it is the same as the previous zone).
Finally, slightly changed some echo output to make debugging friendlier.
(cherry picked from commit 08a9e7add1)
Make sure an incoming IXFR containing an SOA record which is not placed
at the apex of the transferred zone does not result in a broken version
of the zone being served by named and/or a subsequent crash.
(cherry picked from commit 5547003a3d)
Ensure that if prefetch is triggered as a result of a query
restart, it won't have the TRYSTALE_ONTIMEOUT flag set.
(cherry picked from commit 8c047feb3a)
Add a test case where a client request is received and the stale
timeout occurs, but it is not served stale data because there is no entry
in the cache, then is served an authoritative answer once the background
fetch completes. This ensures that a stale timeout only affects a
subsequent response if the client was answered.
(cherry picked from commit c64589bf46)
- send a query for an AAAA which will be resolved as a mapped A
- disable authoritative responses
- wait for the negative AAAA response to become stale
- send another query, wait for the stale answer
- re-enable authorative responses so that a real answer arrives
- currently, this triggers an assertion in query.c
(cherry picked from commit 453e905d7e)
In the shutdown system test multiple queries are sent to a resolver
instance, in the meantime we terminate the same resolver process for
which the queries were sent to, either via rndc stop or a SIGTERM
signal, that means the resolver may not be able to answer all those
queries, since it has initiated the shutdown process.
The dnspython library raises a dns.resolver.NoNameservers exception when
a resolver object fails to receive an answer from the specified list
of nameservers (resolver.nameservers list), we need to handle this
exception as this is something that may happen since we asked the
resolver to terminate, as a result it may not answer clients even if
an answer is available, as the operation will be canceled.
(cherry picked from commit b19cd2d83b)
dns_message_gettempname() now returns a pointer to an initialized
name associated with a dns_fixedname_t object. it is no longer
necessary to allocate a buffer for temporary names associated with
the message object.
(cherry picked from commit e31cc1eeb4)
Also, add "set -e" to all shell scripts of the views test to exit when
any command fails or is unknown, e.g., this on OpenBSD:
tests.sh[174]: seq: not found
(cherry picked from commit a4b7eb7188)
The seq command is not defined in the POSIX standard and is missing on
OpenBSD. Given that the system test code is meant to be POSIX-compliant
replace it with a shell construct.
(cherry picked from commit a08487ec3d)
Add two tests to make sure named-checkconf catches key-directory issues
where a zone in multiple views uses the same directory but has
different dnssec-policies. One test sets the key-directory specifically,
the other inherits the default key-directory (NULL, aka the working
directory).
Also update the good.conf test to allow zones in different views
with the same key-directory if they use the same dnssec-policy.
Also allow zones in different views with different key-directories if
they use different dnssec-policies.
Also allow zones in different views with the same key-directories if
only one view uses a dnssec-policy (the other is set to "none").
Also allow zones in different views with the same key-directories if
no views uses a dnssec-policy (zone in both views has the dnssec-policy
set to "none").
(cherry picked from commit df1aecd5ff)
PyLint 2.8.2 reports the following suggestions for two Python scripts
used in the system test suite:
************* Module tests_rndc_deadlock
bin/tests/system/addzone/tests_rndc_deadlock.py:71:4: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
************* Module tests-shutdown
bin/tests/system/shutdown/tests-shutdown.py:68:4: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
bin/tests/system/shutdown/tests-shutdown.py:157:8: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
Implement the above suggestions by using
concurrent.futures.ThreadPoolExecutor() and subprocess.Popen() as
context managers.
(cherry picked from commit a8163551ed)
