The only reason for including the gssapi.h from the dst/gssapi.h header
was to get the typedefs of gss_cred_id_t and gss_ctx_id_t. Instead of
using those types directly this commit introduces dns_gss_cred_id_t and
dns_gss_ctx_id_t types that are being used in the public API and
privately retyped to their counterparts when we actually call the gss
api.
This also conceals the gssapi headers, so users of the libdns library
doesn't have to add GSSAPI_CFLAGS to the Makefile when including libdns
dst API.
The lmdb.h header doesn't have to be included from the dns/lmdb.h
header as it can be separately included where used. This stops
exposing the inclusion of lmdb.h from the libdns headers.
This commit fix a leak which was happening every time an inline-signed
zone was added to the configuration, followed by a rndc reconfig.
During the reconfig process, the secure version of every inline-signed
zone was "moved" to a new view upon a reconfig and it "took the raw
version along", but only once the secure version was freed (at shutdown)
was prev_view for the raw version detached from, causing the old view to
be released as well.
This caused dangling references to be kept for the previous view, thus
keeping all resources used by that view in memory.
The --enable-option-checking=fatal option prevents ./configure from
proceeding when an unknown option is used in the ./configure step in CI.
This change will avoid adding unsupported ./configure options or options
with typo or typo in pairwise testing "# [pairwise: ...]" marker.
(cherry picked from commit 4295c82e45)
As we generate manual pages from reStructuredText sources, we don't have
absolute control on manual page output and therefore 'mandoc -Tlint' may
always report warnings we can't eliminate. In light of this some mandoc
warnings need to be ignored.
(cherry picked from commit 22fdcb30db)
Coverity assumes that the memory holding any value read using byte
swapping is tainted. As we store the NSEC3PARAM records in wire
form and iterations is byte swapped the memory holding the record
is marked as tainted. nsec3->salt_length is marked as tainted
transitively. To remove the taint the value need to be range checked.
For a correctly formatted record region.length should match
nsec3->salt_length and provides a convenient value to check the field
against.
*** CID 316507: Insecure data handling (TAINTED_SCALAR)
/lib/dns/rdata/generic/nsec3param_51.c: 241 in tostruct_nsec3param()
235 region.length = rdata->length;
236 nsec3param->hash = uint8_consume_fromregion(®ion);
237 nsec3param->flags = uint8_consume_fromregion(®ion);
238 nsec3param->iterations = uint16_consume_fromregion(®ion);
239
240 nsec3param->salt_length = uint8_consume_fromregion(®ion);
>>> CID 316507: Insecure data handling (TAINTED_SCALAR)
>>> Passing tainted expression "nsec3param->salt_length" to "mem_maybedup", which uses it as an offset.
241 nsec3param->salt = mem_maybedup(mctx, region.base,
242 nsec3param->salt_length);
243 if (nsec3param->salt == NULL) {
244 return (ISC_R_NOMEMORY);
245 }
246 isc_region_consume(®ion, nsec3param->salt_length);
(cherry picked from commit c40133d840)
Coverity assumes that the memory holding any value read using byte
swapping is tainted. As we store the NSEC3 records in wire form
and iterations is byte swapped the memory holding the record is
marked as tainted. nsec3->salt_length and nsec3->next_length are
marked as tainted transitively. To remove the taint the values need
to be range checked. Valid values for these should never exceed
region.length so that is becomes a reasonable value to check against.
*** CID 316509: (TAINTED_SCALAR)
/lib/dns/rdata/generic/nsec3_50.c: 312 in tostruct_nsec3()
306 if (nsec3->salt == NULL) {
307 return (ISC_R_NOMEMORY);
308 }
309 isc_region_consume(®ion, nsec3->salt_length);
310
311 nsec3->next_length = uint8_consume_fromregion(®ion);
>>> CID 316509: (TAINTED_SCALAR)
>>> Passing tainted expression "nsec3->next_length" to "mem_maybedup", which uses it as an offset.
312 nsec3->next = mem_maybedup(mctx, region.base, nsec3->next_length);
313 if (nsec3->next == NULL) {
314 goto cleanup;
315 }
316 isc_region_consume(®ion, nsec3->next_length);
317
/lib/dns/rdata/generic/nsec3_50.c: 305 in tostruct_nsec3()
299 region.length = rdata->length;
300 nsec3->hash = uint8_consume_fromregion(®ion);
301 nsec3->flags = uint8_consume_fromregion(®ion);
302 nsec3->iterations = uint16_consume_fromregion(®ion);
303
304 nsec3->salt_length = uint8_consume_fromregion(®ion);
>>> CID 316509: (TAINTED_SCALAR)
>>> Passing tainted expression "nsec3->salt_length" to "mem_maybedup", which uses it as an offset.
305 nsec3->salt = mem_maybedup(mctx, region.base, nsec3->salt_length);
306 if (nsec3->salt == NULL) {
307 return (ISC_R_NOMEMORY);
308 }
309 isc_region_consume(®ion, nsec3->salt_length);
310
(cherry picked from commit fd8d1337a5)
The AddressSanitizer constraint in some libns unit tests does not seem
to be necessary anymore, these tests run fine under AddressSanitizer.
(cherry picked from commit 613be8706e)
Test for Ed25519 and Ed448. If both algorithms are not supported, skip
test. If only one algorithm is supported, run test, skip the
unsupported algorithm. If both are supported, run test normally.
Create new ns3. This will test Ed448 specifically, while now ns2 only
tests Ed25519. This moves some files from ns2/ to ns3/.
(cherry picked from commit 8bf31d0592)
The number of queries to use in the burst can be reduced, as we have
a very low fetch limit of 1.
The dig command in 'wait_for_fetchlimits()' should time out sooner as
we expect a SERVFAIL to be returned promptly.
Enabling serve-stale can be done before hitting fetch-limits. This
reduces the chance that the resolver queries time out and fetch count
is reset. The chance of that happening is already slim because
'resolver-query-timeout' is 10 seconds, but better to first let the
data become stale rather than doing that while attempting to resolve.
(cherry picked from commit 00f575e7ef)
The 'query_usestale()' function was only called when in
'query_gotanswer()' and an unexpected error occurred. This may have
been "quota reached", and thus we were in some cases returning
stale data on fetch-limits (and if serve-stale enabled of course).
But we can also hit fetch-limits when recursing because we are
following a referral (in 'query_notfound()' and
'query_delegation_recurse()'). Here we should also check for using
stale data in case an error occurred.
Specifically don't check for using stale data when refetching a
zero TTL RRset from cache.
Move the setting of DNS_DBFIND_STALESTART into the 'query_usestale()'
function to avoid code duplication.
(cherry picked from commit 8bcd7fe69e)
Add a test case when fetch-limits are reached and we have stale data
in cache.
This test starts with a positive answer for 'data.example/TXT' in
cache.
1. Reload named.conf to set fetch limits.
2. Disable responses from the authoritative server.
3. Now send a batch of queries to the resolver, until hitting the
fetch limits. We can detect this by looking at the response RCODE,
at some point we will see SERVFAIL responses.
4. At that point we will turn on serve-stale.
5. Clients should see stale answers now.
6. An incoming query should not set the stale-refresh-time window,
so a following query should still get a stale answer because of a
resolver failure (and not because it was in the stale-refresh-time
window).
(cherry picked from commit 11b74fc176)
If we did not attempt a fetch due to fetch-limits, we should not start
the stale-refresh-time window.
Introduce a new flag DNS_DBFIND_STALESTART to differentiate between
a resolver failure and unexpected error. If we are resuming, this
indicates a resolver failure, then start the stale-refresh-time window,
otherwise don't start the stale-refresh-time window, but still fall
back to using stale data.
(This commit also wraps some docstrings to 80 characters width)
(cherry picked from commit aabdedeae3)
Before this change, BIND will only fallback to using stale data if
there was an actual attempt to resolve the query. Then on a timeout,
the stale data from cache becomes eligible.
This commit changes this so that on any unexpected error stale data
becomes eligble (you would still have to have 'stale-answer-enable'
enabled of course).
If there is no stale data, this may return in an error again, so don't
loop on stale data lookup attempts. If the DNS_DBFIND_STALEOK flag is
set, this means we already tried to lookup stale data, so if that is
the case, don't use stale again.
(cherry picked from commit c6fd02aed5)
*** CID 318094: Null pointer dereferences (REVERSE_INULL)
/lib/dns/rbtdb.c: 1389 in newversion()
1383 version->xfrsize = rbtdb->current_version->xfrsize;
1384 RWUNLOCK(&rbtdb->current_version->rwlock, isc_rwlocktype_read);
1385 rbtdb->next_serial++;
1386 rbtdb->future_version = version;
1387 RBTDB_UNLOCK(&rbtdb->lock, isc_rwlocktype_write);
1388
CID 318094: Null pointer dereferences (REVERSE_INULL)
Null-checking "version" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
1389 if (version == NULL) {
1390 return (result);
1391 }
1392
1393 *versionp = version;
1394
(cherry picked from commit 456d53d1fb)
