The isc_time_add() and isc_time_subtract() didn't have a unit test, add
the unit test with couple of edge case vectors to check whether overflow
and underflow is correctly handled.
Use the __builtin_uadd_overflow() and __builtin_usub_overflow() for
overflow checks in isc_time_add() and isc_time_subtract(). This
generates more efficient and safe code.
The isc_time_add() could overflow when t.seconds + i.seconds == UINT_MAX
and t.nanoseconds + i.nanoseconds >= NS_PER_S.
Fix the overflow in isc_time_add(), and simplify the ISC_R_RANGE checks
both in isc_time_add() and isc_time_subtract() functions.
The fctxbucket_t properly attaches to the fetchctx_t, so it can safely
use its memory context. Save a little bit of memory by removing own
memory context from fctxbucket_t.
Using proper attach/detach functions for the fetch context
instead of fctx_increference() and _decreference() makes
it easier to debug reference counting errors in the resolver.
Fixed several such errors that were found as a result.
it is possible for udp_recv_cb() to fire after the socket
is already shutting down and statichandle is NULL; we need to
create a temporary handle in this case.
it was possible for the route socket's udp_recv() callback to fire
after the interfacemgr was detached, causing an assertion failure.
this has now been fixed by referencing the interfacemgr when setting up
the route socket, and dereferencing it when shutting it down.
Some of the libns unit tests override the isc_nmhandle_attach() and
_detach() functions. This causes a failure in ns_interface_create()
if a route socket is being used, so we add a parameter to disable it.
route/netlink sockets don't have stats counters associated with them,
so it's now necessary to check whether socket stats exist before
incrementing or decrementing them. rather than relying on the caller
for this, we now just pass the socket and an index, and the correct
stats counter will be updated if it exists.
isc_nm_routeconnect() opens a route/netlink socket, then calls a
connect callback, much like isc_nm_udpconnect(), with a handle that
can then be monitored for network changes.
Internally the socket is treated as a UDP socket, since route/netlink
sockets follow the datagram contract.
After support for route/netlink sockets is merged, not all sockets
will have stats counters associated with them, so it's now necessary
to check whether socket stats exist before incrementing or decrementing
them. rather than relying on the caller for this, we now just pass the
socket and an index, and the correct stats counter will be updated if
it exists.
After receiving a new version of a catalog zone it is required
to merge it with the old version.
The algorithm walks through the new version's hash table and applies
the following logic:
1. If an entry from the new version does not exist in the old
version, then it's a new entry, add the entry to the `toadd` hash
table.
2. If the zone does not exist in the set of configured zones, because
it was deleted via rndc delzone or it was removed from another
catalog zone instance, then add into to the `toadd` hash table to
be reinstantiated.
3. If an entry from the new version also exists in the old version,
but is modified, then add the entry to the `tomod` hash table, then
remove it from the old version's hash table.
4. If an entry from the new version also exists in the old version and
is the same (unmodified) then just remove it from the old version's
hash table.
The algorithm then deletes all the remaining zones which still exist
in the old version's hash table (because only the ones that don't
exist in the new version should now remain there), then adds the ones
that were added to the `toadd`, and modifies the ones that were added
to the `tomod`, completing the merge.
During a recent refactoring, the part when the entry should be
removed from the old version's hash table on condition (4.) above
was accidentally omitted, so the unmodified zones were remaining
in the old version's hash table and consequently being deleted.
The new rules compare the target name in PTR and SRV records against
the machine name embedded in the kerberos principal. This can be
used to further restrict what PTR and SRV records can be added or
deleted via dynamic updates if desired.
The librpz.h defined LIRPZ_LIKELY() and LIBRPZ_UNLIKELY() macros that
were actually unused in the code. Remove the macros and the autoconf
check for __builtin_expect().
The __builtin_expect() can be used to provide the compiler with branch
prediction information. The Gcc manual says[1] on the subject:
In general, you should prefer to use actual profile feedback for
this (-fprofile-arcs), as programmers are notoriously bad at
predicting how their programs actually perform.
Stop using __builtin_expect() and ISC_LIKELY() and ISC_UNLIKELY() macros
to provide the branch prediction information as the performance testing
shows that named performs better when the __builtin_expect() is not
being used.
1. https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#index-_005f_005fbuiltin_005fexpect
due to comparing logfile suffixes as 32 bit rather than 64 bit
integers, logfiles with timestamp suffixes that should have been
removed when rolling could be left in place. this has been fixed.
This commit removes a superfluous call to isc_tlsctx_free() which was
leading to double free() error in a case of a TLS listener creation
failure.
The call is superfluous because the TLS context object is supposed to
be destroyed in ns_listenelt_destroy() only.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* dns_zone_setprimaries()
* dns_zone_setparentals()
* dns_zone_setparentals()
* dns_zone_setalsonotify()
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* dns_view_adddelegationonly()
* dns_view_excludedelegationonly()
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* dns_ssutable_addrule()
* dns_ssutable_create()
* dns_ssutable_createdlz()
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* dns_resolver_addalternate()
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* name_duporclone()
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* build_event()
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* dns_catz_options_copy()
* dns_catz_options_setdefault()
* dns_catz_entry_new()
* dns_catz_entry_copy()
Replace some "master/slave" terminology in the code with the preferred
"primary/secondary" keywords. This also changes user output such as
log messages, and fixes a typo ("seconary") in cfg_test.c.
There are still some references to "master" and "slave" for various
reasons:
- The old syntax can still be used as a synonym.
- The master syntax is kept when it refers to master files and formats.
- This commit replaces mainly keywords that are local. If "master" or
"slave" is used in for example a structure that is all over the
place, it is considered out of scope for the moment.
Replace most "master/slave" terminology in tests with the preferred
"primary/secondary", with the following exceptions:
- When testing the old syntax
- When master is used in master file and master file format terms
- When master is used in hostmaster or postmaster terms
- When master used in legacy domain names (for example in dig.batch)
- When there is no replacement (for example default-masters)
Originally, the hash table used in RBT database would be resized when it
reached certain number of elements (defined by overcommit). This was
causing resolution brownouts for busy resolvers, because the rehashing
could take several seconds to complete. This was mitigated by
pre-allocating the hash table in the RBT database used for caching to be
large-enough as determined by max-cache-size. The downside of this
solution was that the pre-allocated hash table could take a significant
chunk of the memory even when the resolver cache would be otherwise
empty because the default value for max-cache-size is 90% of available
memory.
Implement incremental resizing[1] to perform the rehashing gradually:
1. During the resize, allocate the new hash table, but keep the old
table unchanged.
2. In each lookup or delete operation, check both tables.
3. Perform insertion operations only in the new table.
4. At each insertion also move r elements from the old table to the new
table.
5. When all elements are removed from the old table, deallocate it.
To ensure that the old table is completely copied over before the new
table itself needs to be enlarged, it is necessary to increase the
size of the table by a factor of at least (r + 1)/r during resizing.
In our implementation r is equal to 1.
The downside of this approach is that the old table and the new table
could stay in memory for longer when there are no new insertions into
the hash table for prolonged periods of time as the incremental
rehashing happens only during the insertions.
The upside of this approach is that it's no longer necessary to
pre-allocate large hash table, because the RBT hash table rehashing
doesn't cause resolution brownouts anymore and thus we can use the
memory as needed.
1. https://en.m.wikipedia.org/wiki/Hash_table#Dynamic_resizing
The AX_CHECK_JEMALLOC() m4 macro sets the JEMALLOC_CFLAGS variable, not
JEMALLOC_CPPFLAGS. Furthermore, the JEMALLOC_CFLAGS and JEMALLOC_LIBS
variables should only be included in the build flags if jemalloc was
successfully configured. Tweak lib/isc/Makefile.am accordingly.
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
Previously, when using compiler without support for static assertions,
the STATIC_ASSERT() macro would be replaced with runtime assertion.
Change the STATIC_ASSERT() macro to a version that's compile time
assertion even when using pre-C11 compilers.
Courtesy of Joseph Quinsey: https://godbolt.org/z/K9RvWS
Both <isccc/util.h> and <isc/util.h> defined DE_CONST() macro. As
<isccc/util.h> header includes <isc/util.h>, remove the macro from
<isccc/util.h> header.
There's value mismatch between the return type of dns_rrl() that's
dns_rrl_result_t and ISC_R_SUCCESS which belongs to isc_result_t. This
works incidentally, because DNS_RRL_RESULT_OK == ISC_R_SUCCESS.
This would break when we change isc_result_t to be static enum in
consecutive commit. Change the value to match the type.
Renamed some functions for clarity and readability:
- dns_dispatch_addresponse() -> dns_dispatch_add()
- dns_dispatch_removeresponse() -> dns_dispatch_done()
The dns_dispatch_cancel() function now calls dns_dispatch_done()
directly, so it is no longer ever necessary to call both functions.
dns_dispatch_cancel() is used to terminate dispatch connections
that are still pending, while dns_dispatch_done() is used when they
are complete.
