When doing 'rndc reconfig', named may complain about a zone not being
reusable because it has a raw version of the zone, and the new
configuration has not set 'inline-signing'. However, 'inline-signing'
may be implicitly true if a 'dnssec-policy' is used for the zone, and
the zone is not dynamic.
Improve the check in 'named_zone_reusable'. Create a new function for
checking 'inline-signing' configuration that matches existing code in
'bin/named/server.c'.
(cherry picked from commit ba8128ea00)
Implement support for NSEC3 in dnssec-policy. Store the configuration
in kasp objects. When configuring a zone, call 'dns_zone_setnsec3param'
to queue an nsec3param event. This will ensure that any previous
chains will be removed and a chain according to the dnssec-policy is
created.
Add tests for dnssec-policy zones that uses the new 'nsec3param'
option, as well as changing to new values, changing to NSEC, and
changing from NSEC.
(cherry picked from commit 114af58ee2)
We will be using this function also on reconfig, so it should have
a wider availability than just bin/named/server.
(cherry picked from commit 84a4273074)
Make sure pointer checks in unit tests use cmocka assertion macros
dedicated for use with pointers instead of those dedicated for use with
integers or booleans.
(cherry picked from commit f440600126)
cppcheck 2.2 reports the following false positive:
lib/isc/tests/quota_test.c:71:21: error: Array 'quotas[101]' accessed at index 110, which is out of bounds. [arrayIndexOutOfBounds]
isc_quota_t *quotas[110];
^
The above is not even an array access, so this report is obviously
caused by a cppcheck bug. Yet, it seems to be triggered by the presence
of the add_quota() macro, which should really be a function. Convert
the add_quota() macro to a function in order to make the code cleaner
and to prevent the above cppcheck 2.2 false positive from being
triggered.
(cherry picked from commit ea54a932d2)
cppcheck 2.2 reports the following false positive:
lib/dns/dispatch.c:1241:14: warning: Either the condition 'resp==NULL' is redundant or there is possible null pointer dereference: resp. [nullPointerRedundantCheck]
if (disp != resp->disp) {
^
lib/dns/dispatch.c:1212:11: note: Assuming that condition 'resp==NULL' is not redundant
if (resp == NULL) {
^
lib/dns/dispatch.c:1241:14: note: Null pointer dereference
if (disp != resp->disp) {
^
Apparently this version of cppcheck gets confused about conditional
"goto" statements because line 1241 can never be reached if 'resp' is
NULL.
Move a code block to prevent the above false positive from being
reported without affecting the processing logic.
(cherry picked from commit 0b6216d1c7)
cppcheck is not aware that the bin/dnssec/dnssectool.c:fatal() function
does not return. This triggers certain cppcheck 2.2 false positives,
for example:
bin/dnssec/dnssec-signzone.c:3470:13: warning: Either the condition 'ndskeys==8' is redundant or the array 'dskeyfile[8]' is accessed at index 8, which is out of bounds. [arrayIndexOutOfBoundsCond]
dskeyfile[ndskeys++] = isc_commandline_argument;
^
bin/dnssec/dnssec-signzone.c:3467:16: note: Assuming that condition 'ndskeys==8' is not redundant
if (ndskeys == MAXDSKEYS) {
^
bin/dnssec/dnssec-signzone.c:3470:13: note: Array index out of bounds
dskeyfile[ndskeys++] = isc_commandline_argument;
^
bin/dnssec/dnssec-signzone.c:771:20: warning: Either the condition 'l->hashbuf==NULL' is redundant or there is pointer arithmetic with NULL pointer. [nullPointerArithmeticRedundantCheck]
memset(l->hashbuf + l->entries * l->length, 0, l->length);
^
bin/dnssec/dnssec-signzone.c:767:18: note: Assuming that condition 'l->hashbuf==NULL' is not redundant
if (l->hashbuf == NULL) {
^
bin/dnssec/dnssec-signzone.c:771:20: note: Null pointer addition
memset(l->hashbuf + l->entries * l->length, 0, l->length);
^
Instead of suppressing all such warnings individually, conditionally
define a preprocessor macro which prevents them from being triggered.
(cherry picked from commit d9701e22b5)
The cppcheck bug which commit 4c2c93c821
works around was fixed in cppcheck 2.2. Drop the relevant hack from the
definition of the cppcheck GitLab CI job.
(cherry picked from commit f06dfe0397)
The "stress" test can be run in different ways, depending on:
- the tested scenario (authoritative, recursive),
- the operating system used (Linux, FreeBSD),
- the architecture used (amd64, arm64).
Currently, all supported "stress" test variants are automatically
launched for all scheduled pipelines and for pipelines started for tags;
there is no possibility of running these tests on demand, which could be
useful in certain circumstances.
Employ the "only:variables" key to enable fine-grained control over the
list of "stress" test jobs to be run for a given pipeline. Three CI
variables are used to specify the list of "stress" test jobs to create:
- BIND_STRESS_TEST_MODE: specifies the test mode to use; must be
explicitly set in order for any "stress" test job to be created;
allowed values are: "authoritative", "recursive",
- BIND_STRESS_TEST_OS: specifies the operating system to run the test
on; allowed values are: "linux", "freebsd"; defaults to "linux", may
be overridden at pipeline creation time,
- BIND_STRESS_TEST_ARCH: specifies the architecture to run the test
on; allowed values are: "amd64", "arm64"; defaults to "amd64", may
be overridden at pipeline creation time.
Since case-insensitive regular expressions are used for determining
which jobs to run, every variable described above may contain multiple
values. For example, setting the BIND_STRESS_TEST_MODE variable to
"authoritative,recursive" will cause the "stress" test to be run in both
supported scenarios (either on the default OS/architecture combination,
i.e. Linux/amd64, or, if the relevant variables are explicitly
specified, the requested OS/architecture combinations).
(cherry picked from commit f23094223e)
The synthesised CNAME is not supposed to be followed when the
QTYPE is CNAME or ANY as the lookup is satisfied by the CNAME
record.
(cherry picked from commit e980affba0)
Add one test that checks the behavior when serve-stale is enabled
via configuration (as opposed to enabled via rndc).
Add one test that checks the behavior when stale-refresh-time is
disabled (set to 0).
Using a 'stale-answer-ttl' the same value as the authoritative ttl
value makes it hard to differentiate between a response from the
stale cache and a response from the authoritative server.
Change the stale-answer-ttl from 2 to 4, so that it differs from the
authoritative ttl.
The strategy of running many dig commands in parallel and
waiting for the respective output files to be non empty was
resulting in random test failures, hard to reproduce, where
it was possible that the subsequent reading of the files could
have been failing due to the file's content not being fully flushed.
Instead of checking if output files are non empty, we now wait
for the dig processes to finish.
This test works as follow:
- Query for data.example rrset.
- Sleep until its TTL expires (2 secs).
- Disable authoritative server.
- Query for data.example again.
- Since server is down, answer come from stale cache, which has
a configured stale-answer-ttl of 3 seconds.
- Enable authoritative server.
- Query for data.example again
- Since last query before activating authoritative server failed, and
since 'stale-refresh-time' seconds hasn't elapsed yet, answer should
come from stale cache and not from the authoritative server.
Before the stale-refresh-time feature, the system test for ancient rrset
was somewhat based on the average time the previous tests and queries
were taking, thus not very precise.
After the addition of stale-refresh-time the system test for ancient
rrset started to fail since the queries for stale records (low
max-stale-ttl) were not taking the time to do a full resolution
anymore, since the answers now were coming from the cache (because the
rrset were stale and within stale-refresh-time window after the
previous resolution failure).
To handle this, the correct time to wait before rrset become ancient is
calculated from max-stale-ttl configuration plus the TTL set in the
rrset used in the tests (ans2/ans.pl).
Then before sending queries for ancient rrset, we check if we need to
sleep enough to ensure those rrset will be marked as ancient.
RFC 8767 recommends that attempts to refresh to be done no more
frequently than every 30 seconds.
Added check into named-checkconf, which will warn if values below the
default are found in configuration.
BIND will also log the warning during loading of configuration in the
same fashion.
Before this update, BIND would attempt to do a full recursive resolution
process for each query received if the requested rrset had its ttl
expired. If the resolution fails for any reason, only then BIND would
check for stale rrset in cache (if 'stale-cache-enable' and
'stale-answer-enable' is on).
The problem with this approach is that if an authoritative server is
unreachable or is failing to respond, it is very unlikely that the
problem will be fixed in the next seconds.
A better approach to improve performance in those cases, is to mark the
moment in which a resolution failed, and if new queries arrive for that
same rrset, try to respond directly from the stale cache, and do that
for a window of time configured via 'stale-refresh-time'.
Only when this interval expires we then try to do a normal refresh of
the rrset.
The logic behind this commit is as following:
- In query.c / query_gotanswer(), if the test of 'result' variable falls
to the default case, an error is assumed to have happened, and a call
to 'query_usestale()' is made to check if serving of stale rrset is
enabled in configuration.
- If serving of stale answers is enabled, a flag will be turned on in
the query context to look for stale records:
query.c:6839
qctx->client->query.dboptions |= DNS_DBFIND_STALEOK;
- A call to query_lookup() will be made again, inside it a call to
'dns_db_findext()' is made, which in turn will invoke rbdb.c /
cache_find().
- In rbtdb.c / cache_find() the important bits of this change is the
call to 'check_stale_header()', which is a function that yields true
if we should skip the stale entry, or false if we should consider it.
- In check_stale_header() we now check if the DNS_DBFIND_STALEOK option
is set, if that is the case we know that this new search for stale
records was made due to a failure in a normal resolution, so we keep
track of the time in which the failured occured in rbtdb.c:4559:
header->last_refresh_fail_ts = search->now;
- In check_stale_header(), if DNS_DBFIND_STALEOK is not set, then we
know this is a normal lookup, if the record is stale and the query
time is between last failure time + stale-refresh-time window, then
we return false so cache_find() knows it can consider this stale
rrset entry to return as a response.
The last additions are two new methods to the database interface:
- setservestale_refresh
- getservestale_refresh
Those were added so rbtdb can be aware of the value set in configuration
option, since in that level we have no access to the view object.
