If an invalid key name (e.g. "a..b") in a primaries list in named.conf
is specified the wrong size is passed to isc_mem_put resulting in the
returned memory being put on the wrong freed list.
*** CID 316784: Incorrect expression (SIZEOF_MISMATCH)
/bin/named/config.c: 636 in named_config_getname()
630 isc_buffer_constinit(&b, objstr, strlen(objstr));
631 isc_buffer_add(&b, strlen(objstr));
632 dns_fixedname_init(&fname);
633 result = dns_name_fromtext(dns_fixedname_name(&fname), &b, dns_rootname,
634 0, NULL);
635 if (result != ISC_R_SUCCESS) {
CID 316784: Incorrect expression (SIZEOF_MISMATCH)
Passing argument "*namep" of type "dns_name_t *" and argument "8UL /* sizeof (*namep) */" to function "isc__mem_put" is suspicious.
636 isc_mem_put(mctx, *namep, sizeof(*namep));
637 *namep = NULL;
638 return (result);
639 }
640 dns_name_dup(dns_fixedname_name(&fname), mctx, *namep);
641
Test for Ed25519 and Ed448. If both algorithms are not supported, skip
test. If only one algorithm is supported, run test, skip the
unsupported algorithm. If both are supported, run test normally.
Create new ns3. This will test Ed448 specifically, while now ns2 only
tests Ed25519. This moves some files from ns2/ to ns3/.
The number of queries to use in the burst can be reduced, as we have
a very low fetch limit of 1.
The dig command in 'wait_for_fetchlimits()' should time out sooner as
we expect a SERVFAIL to be returned promptly.
Enabling serve-stale can be done before hitting fetch-limits. This
reduces the chance that the resolver queries time out and fetch count
is reset. The chance of that happening is already slim because
'resolver-query-timeout' is 10 seconds, but better to first let the
data become stale rather than doing that while attempting to resolve.
The 'query_usestale()' function was only called when in
'query_gotanswer()' and an unexpected error occurred. This may have
been "quota reached", and thus we were in some cases returning
stale data on fetch-limits (and if serve-stale enabled of course).
But we can also hit fetch-limits when recursing because we are
following a referral (in 'query_notfound()' and
'query_delegation_recurse()'). Here we should also check for using
stale data in case an error occurred.
Specifically don't check for using stale data when refetching a
zero TTL RRset from cache.
Move the setting of DNS_DBFIND_STALESTART into the 'query_usestale()'
function to avoid code duplication.
Three small cleanups:
1. Remove an unused keystr/dst_key_format.
2. Initialize a dst_key_state_t state with NA.
3. Update false comment about local policy (local policy only adds
barrier on transitions to the RUMOURED state, not the UNRETENTIVE
state).
There was a bug in function 'keymgr_ds_hidden_or_chained()'.
The funcion 'keymgr_ds_hidden_or_chained()' implements (3e) of rule2
as defined in the "Flexible and Robust Key Rollover" paper. The rules
says: All DS records need to be in the HIDDEN state, or if it is not
there must be a key with its DNSKEY and KRRSIG in OMNIPRESENT, and
its DS in the same state as the key in question. In human langauge,
if all keys have their DS in HIDDEN state you can do what you want,
but if a DS record is available to some validators, there must be
a chain of trust for it.
Note that the barriers on transitions first check if the current
state is valid, and then if the next state is valid too. But
here we falsely updated the 'dnskey_omnipresent' (now 'dnskey_chained')
with the next state. The next state applies to 'key' not to the state
to be checked. Updating the state here leads to (true) always, because
the key that will move its state will match the falsely updated
expected state. This could lead to the assumption that Key 2 would be
a valid chain of trust for Key 1, while clearly the presence of any
DS is uncertain.
The fix here is to check if the DNSKEY and KRRSIG are in OMNIPRESENT
state for the key that does not have its DS in the HIDDEN state, and
only if that is not the case, ensure that there is a key with the same
algorithm, that provides a valid chain of trust, that is, has its
DNSKEY, KRRSIG, and DS in OMNIPRESENT state.
The changes in 'keymgr_dnskey_hidden_or_chained()' are only cosmetical,
renaming 'rrsig_omnipresent' to 'rrsig_chained' and removing the
redundant initialization of the DST_KEY_DNSKEY expected state to NA.
The previous commit changed the function definition of
'keymgr_key_is_successor()', this commit updates the code where
this function is called.
In 'keymgr_key_exists_with_state()' the logic is also updated slightly
to become more readable. First handle the easy cases:
- If the key does not match the state, continue with the next key.
- If we found a key with matching state, and there is no need to
check the successor relationship, return (true).
- Otherwise check the successor relationship.
In 'keymgr_key_has_successor()' it is enough to check if a key has
a direct successor, so instead of calling 'keymgr_key_is_successor()',
we can just check 'keymgr_direct_dep()'.
In 'dns_keymgr_run()', we want to make sure that there is no
dependency on the keys before retiring excess keys, so replace
'keymgr_key_is_successor()' with 'keymgr_dep()'.
So far the key manager could only deal with two keys in a rollover,
because it used a simplified version of the successor relationship
equation from "Flexible and Robust Key Rollover" paper. The simplified
version assumes only two keys take part in the key rollover and it
for that it is enough to check the direct relationship between two
keys (is key x the direct predecessor of key z and is key z the direct
successor of key x?).
But when a third key (or more keys) comes into the equation, the key
manager would assume that one key (or more) is redundant and removed
it from the zone prematurely.
Fix by implementing Equation(2) correctly, where we check for
dependencies on keys:
z ->T x: Dep(x, T) = ∅ ∧
(x ∈ Dep(z, T) ∨
∃ y ∈ Dep(z, T)(y != z ∧ y ->T x ∧ DyKyRySy = DzKzRzSz))
This says: key z is a successor of key x if:
- key x depends on key z if z is a direct successor of x,
- or if there is another key y that depends on key z that has identical
key states as key z and key y is a successor of key x.
- Also, key x may not have any other keys depending on it.
This is still a simplified version of Equation(2) (but at least much
better), because the paper allows for a set of keys to depend on a
key. This is defined as the set Dep(x, T). Keys in the set Dep(x, T)
have a dependency on key x for record type T. The BIND implementation
can only have one key in the set Dep(x, T). The function
'keymgr_dep()' stores this key in 'uint32_t *dep' if there is a
dependency.
There are two scenarios where multiple keys can depend on a single key:
1. Rolling keys is faster than the time required to finish the
rollover procedure. This scenario is covered by the recursive
implementation, and checking for a chain of direct dependencies
will suffice.
2. Changing the policy, when a zone is requested to be signed with
a different key length for example. BIND 9 will not mark successor
relationships in this case, but tries to move towards the new
policy. Since there is no successor relationship, the rules are
even more strict, and the DNSSEC reconfiguration is actually slower
than required.
Note: this commit breaks the build, because the function definition
of 'keymgr_key_is_successor' changed. This will be fixed in the
following commit.
*** CID 318094: Null pointer dereferences (REVERSE_INULL)
/lib/dns/rbtdb.c: 1389 in newversion()
1383 version->xfrsize = rbtdb->current_version->xfrsize;
1384 RWUNLOCK(&rbtdb->current_version->rwlock, isc_rwlocktype_read);
1385 rbtdb->next_serial++;
1386 rbtdb->future_version = version;
1387 RBTDB_UNLOCK(&rbtdb->lock, isc_rwlocktype_write);
1388
CID 318094: Null pointer dereferences (REVERSE_INULL)
Null-checking "version" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
1389 if (version == NULL) {
1390 return (result);
1391 }
1392
1393 *versionp = version;
1394
Building sid-i386 in Docker no longer works and we don't have a viable
alternative now, so dropping gcc:sid:i386 is our only option in this
very moment.
removed the isc_cfg_http_t and isc_cfg_tls_t structures
and the functions that loaded and accessed them; this can
be done using normal config parser functions.
This commit contains fixes to unit tests to make them work well on
various platforms (in particular ones shipping old versions of
OpenSSL) and for different configurations.
It also updates the generated manpage to include DoH configuration
options.
This commit completes the support for DNS-over-HTTP(S) built on top of
nghttp2 and plugs it into the BIND. Support for both GET and POST
requests is present, as required by RFC8484.
Both encrypted (via TLS) and unencrypted HTTP/2 connections are
supported. The latter are mostly there for debugging/troubleshooting
purposes and for the means of encryption offloading to third-party
software (as might be desirable in some environments to simplify TLS
certificates management).
This commit includes work-in-progress implementation of
DNS-over-HTTP(S).
Server-side code remains mostly untested, and there is only support
for POST requests.
This commit adds stub parser support and tests for:
- an "http" global option for HTTP/2 endpoint configuration.
- command line options to set http or https port numbers by
specifying -p http=PORT or -p https=PORT. (NOTE: this change
only affects syntax; specifying HTTP and HTTPS ports on the
command line currently has no effect.)
- named.conf options "http-port" and "https-port"
- HTTPSPORT environment variable for use when running tests.
This commit resurrects the old TLS code from
8f73c70d23.
It also includes numerous stability fixes and support for
isc_nm_cancelread() for the TLS layer.
The code was resurrected to be used for DoH.
In order to prevent documentation building issues from being glossed
over, pass the -W command line switch to all sphinx-build invocations.
This causes the latter to return with a non-zero exit code whenever any
Sphinx warnings are triggered.
Both doc/man/ddns-confgen.rst and doc/man/tsig-keygen.rst include
bin/confgen/tsig-keygen.rst, which defines a "man_tsig-keygen" label.
This triggers the following warning when running sphinx-build with the
-W command line switch in the doc/man/ directory:
../../bin/confgen/tsig-keygen.rst:27: WARNING: duplicate label man_tsig-keygen, other instance in /tmp/bind9/doc/man/ddns-confgen.rst
Move the offending label from bin/confgen/tsig-keygen.rst to the proper
spot in doc/arm/manpages.rst to avoid effectively defining it twice in
different source documents while still allowing the relevant man page to
be referenced in the ARM. Also rename that label so that it more
closely matches the content it points to. As the label no longer
immediately precedes a section title in its new location, use
:ref:`Title <label>` syntax for the only reference to the
tsig-keygen/ddns-confgen man page in the ARM.
Simultaneously starting multiple sphinx-build instances with the -d
command line switch set to a common value (which is what happens when
e.g. "make -j6 doc" is run) causes intermittent problems which we failed
to notice before because they only trigger Sphinx warnings, not errors,
e.g.:
WARNING: toctree contains ref to nonexisting file 'reference'
The message above is not triggered because doc/arm/reference.rst is
actually missing from disk at any point, but rather because a temporary
file created by one sphinx-build instance gets truncated by another one
working in parallel (the confusing message quoted above is logged
because of an overly broad "except" statement in Sphinx code).
Prevent this problem from being triggered by making each sphinx-build
process use its own dedicated cache directory.
Mark Andrews
Matthijs Mekking
Michal Nowak
Ondřej Surý
Evan HuntandOndřej Surý
Artem BoldarievandOndřej Surý
Witold KręcickiandOndřej Surý
Michał Kępień