The dns_cache API contained a cache cleaning mechanism that would be
disabled for 'rbt' based cache. As named doesn't have any other cache
implementations, remove the cache cleaning mechanism from dns_cache API.
The RBTDB has own cache cleaning mechanism and therefor the iterator
.cleaning member would never be set to true. Remove the code that
checks for iterator->cleaning from the RBTDB.
This commit make TCP code use uv_try_write() on best effort basis,
just like TCP DNS and TLS DNS code does.
This optimisation was added in
'caa5b6548a11da6ca772d6f7e10db3a164a18f8d' but, similar change was
mistakenly omitted for generic TCP code. This commit fixes that.
The `gen` program was causing a lengthy single-threaded pause in
the BIND build. When generating RDATATYPE_FROMTEXT_SW(), `gen` hit
the inner loop of `find_typename()` over 1.2 billion times. This
change avoids long deeply-nested loops, so `gen` now runs in less
than 10ms, about 300x faster.
No changes to the output.
Don't restart reading in the send callback after the httpdmgr has been
shut down, and call httpd_request(..., ISC_R_SHUTDOWN, ...) when
shutting down the httpdmgr to reduce code duplication.
Previously, the send callback would be synchronous only on success. Add
an option (similar to what other callbacks have) to decide whether we
need the asynchronous send callback on a higher level.
On a general level, we need the asynchronous callbacks to happen only
when we are invoking the callback from the public API. If the path to
the callback went through the libuv callback or netmgr callback, we are
already on asynchronous path, and there's no need to make the call to
the callback asynchronous again.
For the send callback, this means we need the asynchronous path for
failure paths inside the isc_nm_send() (which calls isc__nm_udp_send(),
isc__nm_tcp_send(), etc...) - all other invocations of the send callback
could be synchronous, because those are called from the respective libuv
send callbacks.
Previously, the read callback would be synchronous only on success or
timeout. Add an option (similar to what other callbacks have) to decide
whether we need the asynchronous read callback on a higher level.
On a general level, we need the asynchronous callbacks to happen only
when we are invoking the callback from the public API. If the path to
the callback went through the libuv callback or netmgr callback, we are
already on asynchronous path, and there's no need to make the call to
the callback asynchronous again.
For the read callback, this means we need the asynchronous path for
failure paths inside the isc_nm_read() (which calls isc__nm_udp_read(),
isc__nm_tcp_read(), etc...) - all other invocations of the read callback
could be synchronous, because those are called from the respective libuv
or netmgr read callbacks.
The various factors like NS_PER_MS are now defined in a single place
and the names are no longer inconsistent. I chose the _PER_SEC names
rather than _PER_S because it is slightly more clear in isolation;
but the smaller units are always NS, US, and MS.
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
Extract the tlss values if present from the ipkeylist entry and add
the resulting tls setting to the constructed configuration for the
primary.
When comparing catalog zone entries for reuse also check the
masters.tlss values for equality.
the 'nupdates' field was originally used to track whether a client
was ready to shut down, along with other similar counters nreads,
nrecvs, naccepts and nsends. this is now tracked differently, but
nupdates was overlooked when the other counters were removed.
dlz_ldap_dynamic.c: In function ‘dlz_create’:
dlz_ldap_dynamic.c:971:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
971 | if (result != ISC_R_SUCCESS) {
| ^
dlz_ldap_dynamic.c:974:9: note: here
974 | case 11:
| ^~~~
dlz_ldap_dynamic.c:976:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
976 | if (result != ISC_R_SUCCESS) {
| ^
dlz_ldap_dynamic.c:979:9: note: here
979 | case 10:
| ^~~~
dlz_ldap_dynamic.c:980:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
980 | if (strlen(argv[9]) > 0) {
| ^
dlz_ldap_dynamic.c:987:9: note: here
987 | case 9:
| ^~~~
dlz_wildcard_dynamic.c: In function ‘dlz_lookup’:
dlz_wildcard_dynamic.c:227:14: warning: variable ‘origin’ set but not used [-Wunused-but-set-variable]
227 | bool origin = true;
| ^~~~~~
dlz_wildcard_dynamic.c: In function ‘dlz_lookup’:
dlz_wildcard_dynamic.c:252:28: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
252 | cd->record = "@";
| ^
dlz_wildcard_dynamic.c: In function ‘dlz_authority’:
dlz_wildcard_dynamic.c:328:22: warning: unused variable ‘origin’ [-Wunused-variable]
328 | bool origin;
| ^~~~~~
dlz_wildcard_dynamic.c:312:25: warning: unused variable ‘name’ [-Wunused-variable]
312 | const char *p, *name = "@";
| ^~~~
dlz_wildcard_dynamic.c: In function ‘dlz_create’:
dlz_wildcard_dynamic.c:441:23: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare]
441 | for (i = 4; i < argc; i += 4) {
| ^
dlz_sqlite3_dynamic.c: In function ‘dlz_sqlite3_fetch_row’:
dlz_sqlite3_dynamic.c:447:31: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare]
447 | if (rs->pnRow > 0U && rs->curRow < rs->pnRow) {
| ^
dlz_sqlite3_dynamic.c:447:50: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
447 | if (rs->pnRow > 0U && rs->curRow < rs->pnRow) {
| ^
dlz_perl_driver.c: In function ‘dlz_version’:
dlz_perl_driver.c:116:27: warning: unused parameter ‘flags’ [-Wunused-parameter]
116 | dlz_version(unsigned int *flags) {
| ~~~~~~~~~~~~~~^~~~~
In file included from /usr/lib64/perl5/CORE/perl.h:5685,
from dlz_perl_driver.c:33:
dlz_perl_driver.c: In function ‘dlz_allnodes’:
/usr/lib64/perl5/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
162 | #define POPs (*sp--)
| ~^~~~~~
dlz_perl_driver.c:151:17: note: in expansion of macro ‘POPs’
151 | POPs;
| ^~~~
dlz_perl_driver.c: In function ‘dlz_allowzonexfr’:
/usr/lib64/perl5/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
162 | #define POPs (*sp--)
| ~^~~~~~
dlz_perl_driver.c:251:17: note: in expansion of macro ‘POPs’
251 | POPs;
| ^~~~
dlz_perl_driver.c: In function ‘dlz_findzonedb’:
/usr/lib64/perl5/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
162 | #define POPs (*sp--)
| ~^~~~~~
dlz_perl_driver.c:328:17: note: in expansion of macro ‘POPs’
328 | POPs;
| ^~~~
dlz_perl_driver.c: In function ‘dlz_lookup’:
/usr/lib64/perl5/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
162 | #define POPs (*sp--)
| ~^~~~~~
dlz_perl_driver.c:407:17: note: in expansion of macro ‘POPs’
407 | POPs;
| ^~~~
dlz_perl_driver.c:472:1: error: no previous prototype for ‘missing_perl_method’ [-Werror=missing-prototypes]
472 | missing_perl_method(const char *perl_class_name, PerlInterpreter *my_perl)
| ^~~~~~~~~~~~~~~~~~~
dlz_perl_driver.c: In function ‘missing_perl_method’:
dlz_perl_driver.c:485:9: error: ISO C90 forbids array ‘full_name’ whose size cannot be evaluated [-Werror=vla]
485 | char full_name[BUF_LEN];
| ^~~~
dlz_perl_driver.c: In function ‘dlz_create’:
dlz_perl_driver.c:613:13: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
613 | if (missing_method_name = missing_perl_method(perl_class_name, my_perl))
| ^~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
162 | #define POPs (*sp--)
| ~^~~~~~
dlz_perl_driver.c:657:17: note: in expansion of macro ‘POPs’
657 | POPs;
| ^~~~
dlz_perl_driver.c:502:15: warning: unused variable ‘init_args’ [-Wunused-variable]
502 | char *init_args[] = { NULL, NULL };
| ^~~~~~~~~
gcovr fails to process fuzz/old.gcda and fuzz/old.gcno files after !7045
MR with:
(WARNING) GCOV produced the following errors processing /builds/isc-projects/bind9/fuzz/old.gcda:
Cannot open source file ../../fuzz/old.c
Cannot open source file ../../lib/dns/include/dns/compress.h
Cannot open source file ../../lib/isc/include/isc/buffer.h
...
(gcovr could not infer a working directory that resolved it.)
Given that code coverage inspection is meant only for BIND 9 code and
not its tests and auxiliary tools, the "fuzz" directory should be
excluded from being included in the code coverage report.
