The old code didn't handle race conditions and errors on systems
with non load balancing sockets gracefully. Look for an error on
any child socket and if found close all the child sockets and return
an error.
The old code didn't handle race conditions and errors on systems
with non load balancing sockets gracefully. Look for an error on
any child socket and if found close all the child sockets and return
an error.
This commit ensures that BIND and supplementary tools still can be
built on newer versions of DragonFly BSD. It used to be the case, but
somewhere between versions 6.2 and 6.4 the OS developers rearranged
headers and moved some function definitions around.
Before that the fact that it worked was more like a coincidence, this
time we, at least, looked at the related man pages included with the
OS.
No in depth testing has been done on this OS as we do not really
support this platform - so it is more like a goodwill act. We can,
however, use this platform for testing purposes, too. Also, we know
that the OS users do use BIND, as it is included in its ports
directory.
Building with './configure' and './configure --without-jemalloc' have
been fixed and are known to work at the time the commit is made.
The write node lock needs to be held when setting node->wild in
add_wildcard_magic except when being called from loading_addrdataset
which is used to load the zone without locking during its initial
load.
Return 'isc_result_t' type value instead of 'bool' to indicate
the actual failure. Rename the function to something not suggesting
a boolean type result. Make changes in the places where the API
function is being used to check for the result code instead of
a boolean value.
It is allowed to point parental-agents to a resolver. Therefore, the
RD bit should be set on requests.
Upon receiving a DS response, ensure that the message has either the
AA or the RA bit set.
Detaching the views in the zone_shutdown() could lead to
lock-order-inversion between adb->namelocks[bucket], adb->lock,
view->lock and zone->lock. Detach the views outside of the section that
zone-locked.
Cherry-pick small fixup commit from 9.18/9.16 branches needed for
thread-safety. This fixup commit is not needed for 9.19+ because of
reworked application setup, but it decouples isc_iterated_hash and
isc_md units and keeps all the branches in sync.
As this code is on hot path (NSEC3) this introduces an additional
optimization of the EVP_MD API - instead of calling EVP_MD_CTX_new() on
every call to isc_iterated_hash(), we create two thread_local objects
for each thread - a basectx and mdctx, initialize basectx once and then
use EVP_MD_CTX_copy_ex() to flip the initialized state into mdctx. This
saves us couple more valuable microseconds from the isc_iterated_hash()
call.
If the OpenSSL SHA1_{Init,Update,Final} API is still available, use it.
The API has been deprecated in OpenSSL 3.0, but it is significantly
faster than EVP_MD API, so make an exception here and keep using it
until we can't.
Instead of going through another layer, use OpenSSL EVP_MD API directly
in the isc_iterated_hash() implementation. This shaves off couple of
microseconds in the microbenchmark.
The implicit algorithm fetch causes a lock contention and significant
slowdown for small input buffers. For more details, see:
https://github.com/openssl/openssl/issues/19612
Instead of using EVP_DigestInit_ex() initialize empty MD_CTX objects for
each algorithm and use EVP_MD_CTX_copy_ex() to initialize MD_CTX from a
static copy. Additionally avoid implicit algorithm fetching by using
EVP_MD_fetch() for OpenSSL 3.0.
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
The .view (and possibly .prev_view) would be kept attached to the
removed zone until the zone is fully removed from the memory in
zone_free(). If this process is delayed because server is busy
something else like doing constant `rndc reconfig`, it could take
seconds to detach the view, possibly keeping multiple dead views in the
memory. This could quickly lead to a massive memory bloat.
Release the views early in the zone_shutdown() call, and don't wait
until the zone is freed.
During XoT it is important to check for "dot" ALPN tag to be
negotiated (according to the RFC 9103). We were doing that, however, the
situation was not handled properly, leading to non-cancelled zone
transfers that would crash (abort()) BIND on shutdown.
In this particular case 'result' might equal 'ISC_R_SUCCESS'. When
this is the case, the part of the code supposed to handle failures
will not cancel the zone transfer.
This situation cannot happen when BIND is a secondary of other BIND
instance. Only primaries following the RFC not closely enough could
trigger such a behaviour.
As shown in the previous commit, using sizeof(type_t) is a little
bit more error-prone when copy-pasting code, so extracting the
size information from the pointer which is being dealt with seems
like a better alternative.
Free 'sizeof(dns_forwarder_t)' bytes of memory instead of
'sizeof(dns_sockaddr_t)' bytes, because `fwd` is a pointer
to a 'dns_forwarder_t' type structure.
Prefer the pthread_barrier implementation on platforms where it is
available over uv_barrier implementation. This also solves the problem
with thread sanitizer builds on macOS that doesn't have pthread barrier.
We already have a synchronization mechanism when starting the UDP and
TCP listener children - barriers. Change how we start the first-born
child (tid == 0), so we don't have to race for sock->parent->result and
sock->parent->fd.
Change the per-socket inactive uvreq cache (implemented as isc_astack)
to per-worker memory pool.
Change the per-socket inactive nmhandle cache (implemented as
isc_astack) to unlocked per-socket ISC_LIST.
Always track the per-worker sockets in the .active_sockets field in the
isc__networker_t struct and always track the per-socket handles in the
.active_handles field ian the isc_nmsocket_t struct.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
- Use separate EVP_PKEY for public and private keys
- On private key load, generate public key allowing better consistency
- Support OpenSSL3 providers
- Clean up key construction abstraction
- Various other clean ups
The ns_client_aclchecksilent is used to check multiple ACLs before
the decision is made that a query is denied. It is also used to
determine if recursion is available. In those cases we should not
set the extended DNS error "Prohibited".
Instead of trying to optimize by using a stack local variable
with additional #ifdef logic, use identical implementations of
the upstream functions to reduce #ifdef clutter.
Move the definitions from dst_openssl.h to openssl_shim.h where
rest of the shim is.
Instead of trying to enforce one pkey to contain both a private
and a public key pair, refactor the code to have separate public
and private pkeys.
This is a prerequisite for proper openssl 3.0 providers support
and greatly simplifies the code.
The dns_zonemgr_releasezone() function makes a decision to destroy
'zmgr' (based on its references count, after decreasing it) inside
a lock, and then destroys the object outside of the lock.
This causes a race with dns_zonemgr_detach(), which could destroy
the object in the meantime.
Change dns_zonemgr_releasezone() to detach from 'zmgr' and destroy
the object (if needed) using dns_zonemgr_detach(), outside of the
lock.
- Make it a separate opensslrsa_check_exponent_bits() function to
clean up the code a bit
- Always use provider API first if using openssl 3.0, and fallback
to EVP API for older openssl or if built with engine support
- Use RSA_get0_key() (with shim for openssl 1.0) to avoid memory
allocations
