checkbashisms gets confused by the rndc command being on two lines:
possible bashism in bin/tests/system/nzd2nzf/tests.sh line 37 (type):
rndccmd 10.53.0.1 addzone "added.example { type primary; file \"added.db\";
(cherry picked from commit 9eb2f6b0e8)
checkbashisms reports Bash-style ("==") string comparisons inside test/[
command:
possible bashism in bin/tests/system/checkconf/tests.sh line 105 (should be 'b = a'):
if [ $? == 0 ]; then echo_i "failed"; ret=1; fi
possible bashism in bin/tests/system/keyfromlabel/tests.sh line 62 (should be 'b = a'):
test $ret == 0 || continue
possible bashism in bin/tests/system/keyfromlabel/tests.sh line 79 (should be 'b = a'):
test $ret == 0 || continue
(cherry picked from commit 7640fc5b39)
The checkbashisms script reports errors like this one:
script util/check-line-length.sh does not appear to have a #! interpreter line;
you may get strange results
(cherry picked from commit 9e68997cbb)
There were a number of places where the zone table should have been
locked, but wasn't, when dns_zt_apply was called.
Added a isc_rwlocktype_t type parameter to dns_zt_apply and adjusted
all calls to using it. Removed locks in callers.
(cherry picked from commit f053d5b414)
If 'set -x' is in effect file.prev gets populated with debugging output.
To prevent this open descriptor 3 and redirect stderr from the awk
command to descriptor 3. Debugging output will stay directed to stderr.
(cherry picked from commit 10f67938db)
Using the -x option for cherry pick makes it easy to link commits across
branches and it is recommended to use for all backport commits (with
exceptions -- thus a warning level rather than failure).
(cherry picked from commit 5ecb277090)
To avoid accidentally merging unfinished work, detect prohibited
keywords at the start of the subject line. If the first word is any of
the following, fail the check:
WIP, wip, DROP, drop, TODO, todo
The only slightly controversial is the lowercase "drop" which might have
a legitimate use - seems like four commits in the history used it as a
start of a sentence. However, since people commonly use "drop" to
indicate a commit should be dropped before merging, let's prohibit it as
well. In case of false-positive, "Drop" with a capitalized first letter
can always be used.
(cherry picked from commit 402b11431c)
Since the LGTM label was deprecated in favor of using the Approve button
in gitlab, adjust the detection in danger bot.
Unfortunately, danger-python seems no longer maintained since 2020 and
MR approvals aren't available in its Python API (even though they're
supported in its Ruby/JS APIs). Going forward, let's use the more
comprehensive python-gitlab API.
It still makes sense to utilize the danger-python, since it handles the
integration with gitlab which doesn't need to be reimplemented as long
as it works - same with the other checks.
(cherry picked from commit e901342dd9)
From now on all per-version notes link to the global list
of Known Issues. If there is a new note it should be listed twice:
In the per-version list, and in the global list.
(cherry picked from commit c58dd2790a)
the dupsigs test is prone to failing on slow CI machines
because the first test can occur before the zone is fully
signed.
instead of just waiting ten seconds arbitrarily, we now
check every second, and allow up to 30 seconds before giving
up.
(cherry picked from commit d9b85cbaae)
The zone_refreshkeys() could run before the zone_shutdown(), but after
the last .erefs has been "detached" causing assertion failure when doing
dns_zone_attach(). Remove the use of .erefs (dns_zone_attach/detach)
and replace it with using the .irefs and additional checks whether the
zone is exiting in the callbacks.
(cherry picked from commit 80e66fbd2d)
If after a reconfig a zone is not reusable because inline-signing
was turned on/off, trigger a full resign. This is necessary because
otherwise the zone maintenance may decide to only apply the changes
in the journal, leaving the zone in an inconsistent DNSSEC state.
(cherry picked from commit 4d143f2cc4)
There was an exception for dnssec-policy that allowed DNSSEC in the
unsigned version of the zone. This however causes a crash if the
zone switches from dynamic to inline-signing in the case of NSEC3,
because we are now trying to add an NSEC3 record to a non-NSEC3 node.
This is because BIND expects none of the records in the unsigned
version of the zone to be NSEC3.
Remove the exception for dnssec-policy when copying non DNSSEC
records, but do allow for DNSKEY as this may be a published DNSKEY
from a different provider.
(cherry picked from commit 332b98ae49)
The changes in the code have the side effect that the CDNSKEY and CDS
records in the secure version of the zone are not reusable and thus
are thrashed from the zone. Remove the apex checks for this use case.
We only care about that the zone is not immediately goes bogus, but
a user really should use the built-in "insecure" policy when unsigning
a zone.
(cherry picked from commit bc703a12e7)
Similar to an attempt to add NSEC through dynamic update, add a test
case that tries to add NSEC3 through zone transfer.
(cherry picked from commit ef1cb9935c)
Add one more case that tests reconfiguring a zone to turn off
inline-signing. It should still be a valid DNSSEC zone and the NSEC3
parameters should not change.
Add another test to ensure that you cannot update the zone with a
NSEC3 record.
(cherry picked from commit 4cd8e8e9c3)
We no longer accept copying DNSSEC records from the raw zone to
the secure zone, so update the kasp system test that relies on this
accordingly.
Also add more debugging and store the dnssec-verify results in a file.
(cherry picked from commit 57ea9e08c6)
Add a kasp system test that reconfigures a dnssec-policy zone from
maintaining DNSSEC records directly to the zone to using inline-signing.
Add a similar test case to the nsec3 system test, testing the same
thing but now with NSEC3 in use.
(cherry picked from commit 9018fbb205)
The algorithm support detection script doesn't seem to work when using
the SoftHSM module. For some reason, dnssec-keygen returns 'crypto
failure'. Since the tests themselves pass, this is likely to be some
bug/definiency in the test scripts that check algorithm support that get
confused by SoftHSM.
Since this issue only happens for the system:gcc:softhsm2.6 job in the
9.16 branch, use a workaround to not introduce this new feature for
this particular problematic job.
Use the ALGORITHM_SET option to use randomly selected default algorithm
in this test. Make sure the test works by using variables instead of
hard-coding values.
(cherry picked from commit f65f276f98)
Use the get_algorithms.py script to detect supported algorithms and
select random algorithms to use for the tests.
Make sure to load common.conf.sh after KEYGEN env var is exported.
(cherry picked from commit 69b608ee9f)
Multiple algorithm sets can be defined in this script. These can be
selected via the ALGORITHM_SET environment variable. For compatibility
reasons, "stable" set contains the currently used algorithms, since our
system tests need some changes before being compatible with randomly
selected algorithms.
The script operation is similar to the get_ports.py - environment
variables are created and then printed out as `export NAME=VALUE`
commands, to be interpreted by shell. Once we support pytest runner for
system tests, this should be a fixture instead.
(cherry picked from commit 5f480c8485)
Certain variables have to be exported in order for the system tests to
work. It makes little sense to export the variables in one place/script
while they're defined in another place.
Since it makes no harm, export all the variables to make the behaviour
more predictable and consistent. Previously, some variables were
exported as environment variables, while others were just shell
variables which could be used once the configuration was sourced from
another script. However, they wouldn't be exposed to spawned processes.
For simplicity sake (and for the upcoming effort to run system tests
with pytest), export all variables that are used. TESTS, PARALLEL_UNIX
and SUBDIRS variables are automake-specific, aren't used anywhere else
and thus not exported.
(cherry picked from commit 37d14c69c0)
The only variable really needed for the script to work is the path to
the $KEYGEN binary. Allow setting this via an environment variable to
avoid loading conf.sh (and causing a chicken-egg problem). Also make
testcrypto.sh executable to allow its use from conf.sh.
(cherry picked from commit bb1c6bbdc7)
When named starts it creates an empty KEYDATA record in the managed-keys
zone as a placeholder, then schedules a key refresh. If key refresh
fails for some reason (e.g. connectivity problems), named will load the
placeholder key into secroots as a trusted key during the next startup,
which will break the chain of trust, and named will never recover from
that state until managed-keys.bind and managed-keys.bind.jnl files are
manually deleted before (re)starting named again.
Before calling load_secroots(), check that we are not dealing with a
placeholder.
(cherry picked from commit 354ae2d7e3)
Add a dnssec test to make sure that named can correctly process a
managed-keys zone with a placeholder KEYDATA record.
(cherry picked from commit 8c48eabbc1)
