some versions of perl failed to run packet.pl because the 'last'
keyword can't be used outside of a loop block. this commit changes
the packet dumping code to a function so we can use 'return' instead.
(cherry picked from commit bf9aee1b88)
the tcp system test uses the 'packet.pl' test tool to send a packet
thousands of times. this took a long time because the tool was waiting
for replies and parsing them; however, for that particular test the
replies aren't relevant.
this commit uses non-blocking sockets and moves the reply parsing
outside the send loop, which speeds the system test up substantially.
(cherry picked from commit 1ceea908b6)
As generated documentation files are no longer stored in the BIND Git
repository, put a copy of the PDF version of the BIND ARM generated by
the "docs" GitLab CI job into the Windows zips to make it easily
available to the end users on that platform.
Make sure Windows zips also contain certain documentation files included
in source tarballs to make the contents of each release more consistent
across different platforms.
(cherry picked from commit 549ddca256)
The "huge.zone" zone can take longer than 100 seconds to load when
running under a sanitizer. Increase the relevant zone load timeout to
prevent intermittent failures of the "rndc" system test.
(cherry picked from commit fd08918df5)
Log diagnostic message when dns_name_issubdomain() in the fctx_create()
when the resolver is qname minimizing and forwarding at the same time.
(cherry picked from commit 0a22024c27)
The test works as follows:
1. Client wants to resolve unusual ip6.arpa. name:
test1.test2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.9.0.9.4.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. IN TXT
2. Query is sent to ns7, a qmin enabled resolver.
3. ns7 do the first stage in query minimization for the name and send a new
query to root (ns1):
_.1.0.0.2.ip6.arpa. IN A
4. ns1 delegates ip6.arpa. to ns2.good.:
;; AUTHORITY SECTION:
;ip6.arpa. 20 IN NS ns2.good.
;; ADDITIONAL SECTION:
;ns2.good. 20 IN A 10.53.0.2
5. ns7 do a second round in minimizing the name and send a new query
to ns2.good. (10.53.0.2):
_.8.2.6.0.1.0.0.2.ip6.arpa. IN A
6. ans2 delegates 8.2.6.0.1.0.0.2.ip6.arpa. to ns3.good.:
;; AUTHORITY SECTION:
;8.2.6.0.1.0.0.2.ip6.arpa. 60 IN NS ns3.good.
;; ADDITIONAL SECTION:
;ns3.good. 60 IN A 10.53.0.3
7. ns7 do a third round in minimizing the name and send a new query to
ns3.good.:
_.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. IN A
8. ans3 delegates 1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. to ns4.good.:
;; AUTHORITY SECTION:
;1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. 60 IN NS ns4.good.
;; ADDITIONAL SECTION:
;ns4.good. 60 IN A 10.53.0.4
9. ns7 do fourth round in minimizing the name and send a new query to
ns4.good.:
_.9.4.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. IN A
10. ns4.good. doesn't know such name, but answers stating it is authoritative for
the domai:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 53815
...
;; AUTHORITY SECTION:
1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. 60 IN SOA ns4.good. ...
11. ns7 do another minimization on name:
_.9.0.9.4.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa
sends to ns4.good. and gets the same SOA response stated in item #10
12. ns7 do another minimization on name:
_.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.9.0.9.4.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa
sends to ns4.good. and gets the same SOA response stated in item #10.
13. ns7 do the last query minimization name for the ip6.arpa. QNAME.
After all IPv6 labels are exausted the algorithm falls back to the
original QNAME:
test1.test2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.9.0.9.4.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa
ns7 sends a new query with the original QNAME to ans4.
14. Finally ans4 answers with the expected response:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40969
;; flags: qr aa; QUESTION: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 8192
;; QUESTION SECTION:
;test1.test2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.9.0.9.4.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. IN TXT
;; ANSWER SECTION:
;test1.test2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.9.0.9.4.1.1.1.1.8.2.6.0.1.0.0.2.ip6.arpa. 1 IN TXT "long_ip6_name"
(cherry picked from commit 11add69198)
Before this commit, BIND was unable to resolve ip6.arpa names like
the one reported in issue #1847 when using query minimization.
As reported in the issue, an attempt to resolve a name like
'rec-test-dom-158937817846788.test123.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.2.0.3.4.3.5.4.0.8.2.6.0.1.0.0.2.ip6.arpa'
using default settings would fail.
The reason was that query minimization algorithm in 'fctx_minimize_qname'
would divide any ip6.arpa names in increasing number of labels,
7,11, ... up to 35, thus limiting the destination name (minimized) to a number
of 35 labels.
In case the last query minimization attempt (with 35 labels) would fail with
NXDOMAIN, BIND would attempt the query mininimization again with the exact
same QNAME, limited on the 35 labels, and that in turn would fail again.
This fix avoids this fail loop by considering the extra labels that may appear
in the leftmost part of an ip6.arpa name, those after the IPv6 part.
(cherry picked from commit 230d79c191)
Log when named decides to add a CDS/CDNSKEY record to the zone. Now
you understand how the bug was found that was fixed in the previous
commits.
(cherry picked from commit f9ef5120c1)
The CDS/CDNSKEY record will be published when the DS is in the
rumoured state. However, with the introduction of the rndc '-checkds'
command, the logic in the keymgr was changed to prevent the DS
state to go in RUMOURED unless the specific command was given. Hence,
the CDS was never published before it was seen in the parent.
Initially I thought this was a policy approval rule, however it is
actually a DNSSEC timing rule. Remove the restriction from
'keymgr_policy_approval' and update the 'keymgr_transition_time'
function. When looking to move the DS state to OMNIPRESENT it will
no longer calculate the state from its last change, but from when
the DS was seen in the parent, "DS Publish". If the time was not set,
default to next key event of an hour.
Similarly for moving the DS state to HIDDEN, the time to wait will
be derived from the "DS Delete" time, not from when the DS state
last changed.
(cherry picked from commit c8205bfa0e)
The 'rndc_checkds' utility now allows "now" as the time when the DS
has been seen in/seen removed from the parent.
Also it uses "KEYX" as the key argument, rather than key id.
The 'rndc_checkds' will retrieve the key from the "KEYX" string. This
makes the call a bit more readable.
(cherry picked from commit dd754a974c)
This commit has a lot of updates on comments, mainly to make the
system test more readable.
Also remove some redundant signing policy checks (check_keys,
check_dnssecstatus, check_keytimes).
Finally, move key time checks and expected key time settings above
'rndc_checkds' calls (with the new way of testing next key event
times there is no need to do them after 'rndc_checkds', and moving
them above 'rndc_checkds' makes the flow of testing easier to follow.
(cherry picked from commit 8cb394e047)
Add the new '-P ds' and '-D ds' calls to the kasp test setup so that
next key event times can reliably be tested.
(cherry picked from commit 4a67cdabfe)
Add two more arguments to the dnssec-settime tool. '-P ds' sets the
time that the DS was published in the parent, '-D ds' sets the time
that the DS was removed from the parent (these times are not accurate,
but rely on the user to use them appropriately, and as long as the
time is not before actual publication/withdrawal, it is fine).
These new arguments are needed for the kasp system test. We want to
test when the next key event is once a DS is published, and now
that 'parent-registration-delay' is obsoleted, we need a different
approach to reliable test the timings.
(cherry picked from commit d4c4f6a669)
The test for assertion failure via large TCP packet needs to be repeated
multiple times (we use 300000). This commit fixes the input file to be
properly hexlified and uses the new packet.pl -r feature to send it
300000 times via TCP.
(cherry picked from commit 5f6eb014aa)
For some tests, we need to send big data streams (for TCP) or repeated
packets (for UDP), this commits adds `-r` option to packet.pl that sends
the same input <repeats> times using the specified protocol.
(cherry picked from commit dd46559a19)
