Using "stale-answer-client-timeout" turns out to have unforeseen
negative consequences, and thus it is better to disable the feature
by default for the time being.
(cherry picked from commit e443279bbf)
When implementing "stale-answer-client-timeout", we decided that
we should only return positive answers prematurely to clients. A
negative response is not useful, and in that case it is better to
wait for the recursion to complete.
To do so, we check the result and if it is not ISC_R_SUCCESS, we
decide that it is not good enough. However, there are more return
codes that could lead to a positive answer (e.g. CNAME chains).
This commit removes the exception and now uses the same logic that
other stale lookups use to determine if we found a useful stale
answer (stale_found == true).
This means we can simplify two test cases in the serve-stale system
test: nodata.example is no longer treated differently than data.example.
(cherry picked from commit aaed7f9d8c)
When the authsock.pl script would be terminated with a signal,
it would leave the pidfile around. This commit adds a signal
handler that cleanups the pidfile on signals that are expected.
Added tests to ensure that dig won't retry sending a query over tcp
(+tcp) when a TCP connection is closed prematurely (EOF is read) if
either +tries=1 or retry=0 is specified on the command line.
Now that premature EOF on tcp connections take +tries and +retry into
account, the dig system tests handling TCP EOF with +tries=1 were
expecting dig to do a second attempt in handling the tcp query, which
doesn't happen anymore.
To make the test work as expected +tries value was adjusted to 2, to
make it behave as before after the new update on dig.
When calling "rndc dnssec -checkds", it may take some milliseconds
before the appropriate changes have been written to the state file.
Add retry_quiet mechanisms to allow the write operation to finish.
Also retry_quiet the check for the next key event. A "rndc dnssec"
command may trigger a zone_rekey event and this will write out
a new "next key event" log line, but it may take a bit longer than
than expected in the tests.
(cherry picked from commit 82d667e1d5)
Call 'dns_zone_rekey' after a 'rndc dnssec -checkds' or 'rndc dnssec
-rollover' command is received, because such a command may influence
the next key event. Updating the keys immediately avoids unnecessary
rollover delays.
The kasp system test no longer needs to call 'rndc loadkeys' after
a 'rndc dnssec -checkds' or 'rndc dnssec -rollover' command.
(cherry picked from commit 82f72ae249)
CDS/CDNSKEY DELETE records are only useful if they are signed,
otherwise the parent cannot verify these RRsets anyway. So once the DS
has been removed (and signaled to BIND), we can remove the DNSKEY and
RRSIG records, and at this point we can also remove the CDS/CDNSKEY
records.
(cherry picked from commit 6f31f62d69)
While not useful, having a CDS/CDNSKEY DELETE record in an unsigned
zone is not an error and "named-checkzone" should not complain.
(cherry picked from commit f211c7c2a1)
Change the 'check_keys' function to try three times. Some intermittent
kasp test failures are because we are inspecting the key files
before the actual change has happen. The 'retry_quiet' approach allows
for a bit more time to let the write operation finish.
(cherry picked from commit d5531df79a)
Add two test zones that migrate to dnssec-policy. Test if the key
states are set accordingly given the timing metadata.
The rumoured.kasp zone has its Publish/Active/SyncPublish times set
not too long ago so the key states should be set to RUMOURED. The
omnipresent.kasp zone has its Publish/Active/SyncPublish times set
long enough to set the key states to OMNIPRESENT.
Slightly change the init_migration_keys function to set the
key lifetime to "none" (legacy keys don't have lifetime). Then in the
test case set the expected key lifetime explicitly.
(cherry picked from commit c40c1ebcb1)
This commit is somewhat editorial as it does not introduce something
new nor fixes anything.
The layout in keymgr2kasp/tests.sh has been changed, with the
intention to make more clear where a test scenario ends and begins.
The publication time of some ZSKs has been changed. It makes a more
clear distinction between publication time and activation time.
(cherry picked from commit f6fa254256)
Add a script similar to conf.sh to include common functions and
variables for testing KASP. Currently used in kasp, keymgr2kasp, and
nsec3.
(cherry picked from commit ecb073bdd6)
The kasp system test was getting pretty large, and more tests are on
the way. Time to split up. Move tests that are related to migrating
to dnssec-policy to a separate directory 'keymgr2kasp'.
(cherry picked from commit 5389172111)
The system tests were missing a test that would test tcp-initial-timeout
and tcp-idle-timeout.
This commit adds new "timeouts" system test that adds:
* Test that waits longer than tcp-initial-timeout and then checks
whether the socket was closed
* Test that sends and receives DNS message then waits longer than
tcp-initial-timeout but shorter time than tcp-idle-timeout than
sends DNS message again than waits longer than tcp-idle-timeout
and checks whether the socket was closed
* Similar test, but bursting 25 DNS messages than waiting longer than
tcp-initial-timeout and shorter than tcp-idle-timeout than do second
25 DNS message burst
* Check whether transfer longer than tcp-initial-timeout succeeds
Add a test for freezing, manually updating, and then thawing a dynamic
zone with "dnssec-policy". In the kasp system test we add parameters
to the "update_is_signed" check to signal the indicated IP addresses
for the labels "a" and "d". If set to '-', the test is skipped.
After nsupdating the dynamic.kasp zone, we revert the update (with
nsupdate) and update the zone again, but now with the freeze/thaw
approach.
(cherry picked from commit 0cae3249e3)
when testing if interactive mode continues or not on
invalid hostname. We only need to detect that getaddrinfo
failed and that we continued or not.
(cherry picked from commit 25d1276170)
When we query the resolver for a domain name that is in the same zone
for which is already one or more fetches outstanding, we could
potentially hit the fetch limits. If so, recursion fails immediately
for the incoming query and if serve-stale is enabled, we may try to
return a stale answer.
If the resolver is also is authoritative for the parent zone (for
example the root zone), first a delegation is found, but we first
check the cache for a better response.
Nothing is found in the cache, so we try to recurse to find the
answer to the query.
Because of fetch-limits 'dns_resolver_createfetch()' returns an error,
which 'ns_query_recurse()' propagates to the caller,
'query_delegation_recurse()'.
Because serve-stale is enabled, 'query_usestale()' is called,
setting 'qctx->db' to the cache db, but leaving 'qctx->version'
untouched. Now 'query_lookup()' is called to search for stale data
in the cache database with a non-NULL 'qctx->version'
(which is set to a zone db version), and thus we hit an assertion
in rbtdb.
This crash was introduced in 'v9_16' by commit
2afaff75ed.
(cherry picked from commit 87591de6f7)
tests that version 1 journal files containing version 1 transaction
headers are rolled forward correctly on server startup, then updated
into version 2 journals. also checks journal file consistency and
'max-journal-size' behavior.
(cherry picked from commit a0aefa1de6)
When a staleonly lookup doesn't find a satisfying answer, it should
not try to respond to the client.
This is not true when the initial lookup is staleonly (that is when
'stale-answer-client-timeout' is set to 0), because no resolver fetch
has been created at this point. In this case continue with the lookup
normally.
(cherry picked from commit f8b7b597e9)
Fix a crash that can happen in the following scenario:
A client request is received. There is no data for it in the cache,
(not even stale data). A resolver fetch is created as part of
recursion.
Some time later, the fetch still hasn't completed, and
stale-answer-client-timeout is triggered. A staleonly lookup is
started. It will also find no data in the cache.
So 'query_lookup()' will call 'query_gotanswer()' with ISC_R_NOTFOUND,
so this will call 'query_notfound()' and this will start recursion.
We will eventually end up in 'ns_query_recurse()' and that requires
the client query fetch to be NULL:
REQUIRE(client->query.fetch == NULL);
If the previously started fetch is still running this assertion
fails.
The crash is easily prevented by not requiring recursion for
staleonly lookups.
Also remove a redundant setting of the staleonly flag at the end of
'query_lookup_staleonly()' before destroying the query context.
Add a system test to catch this case.
(cherry picked from commit 9e061faaae)
GitLab issue #2498 is a bug report on NSEC3 with dynamic zones. Tests
for it in the nsec3 system test directory were missing.
(cherry picked from commit 0c0f10b53f)
*** CID 320481: Null pointer dereferences (REVERSE_INULL)
/bin/tests/wire_test.c: 261 in main()
255 process_message(input);
256 }
257 } else {
258 process_message(input);
259 }
260
CID 320481: Null pointer dereferences (REVERSE_INULL)
Null-checking "input" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
261 if (input != NULL) {
262 isc_buffer_free(&input);
263 }
264
265 if (printmemstats) {
266 isc_mem_stats(mctx, stdout);
(cherry picked from commit 658c950d7b)
Two minor fixes in the kasp system test:
1. A wrong comment in ns3/setup.sh (we are subtracting 2 hours, not
adding them).
2. 'get_keyids' used bad parameters "$1" "$2" when 'check_numkeys'
failed. Also, 'check_numkeys' can use $DIR, $ZONE, and $NUMKEYS
directly, no need to pass them.
(cherry picked from commit 5be26898c0)
Add some more zones to the kasp system test to test the 'purge-keys'
option. Three zones test that the predecessor key files are removed
after the purge keys interval, one test checks that the key files
are retained if 'purge-keys' is disabled. For that, we change the
times to 90 days in the past (the default value for 'purge-keys').
(cherry picked from commit 6333ff15f0)
Add a new option 'purge-keys' to 'dnssec-policy' that will purge key
files for deleted keys. The option determines how long key files
should be retained prior to removing the corresponding files from
disk.
If set to 0, the option is disabled and 'named' will not remove key
files from disk.
(cherry picked from commit 313de3a7e2)
feature-test tool location needs to be determined by its associated
variable; otherwise, the tool is not found on Windows:
setup.sh: line 22: ../feature-test: No such file or directory
(cherry picked from commit 102f012631)
Any CI job:
- I:dnssec:file dnssec/ns1/trusted.keys not removed
- I:rpzrecurse:file rpzrecurse/ns3/named.run.prev not removed
system:gcc:sid:amd64:
- I:mirror:file mirror/ns3/_default.nzf not removed
system:gcc:xenial:amd64:
- I:shutdown:file shutdown/.cache/v/cache/lastfailed not removed
(cherry picked from commit 14a104d121)
Descriptions of UNTESTED and SKIPPED system test results are very
similar to one another and it may be confusing when to pick one and
when the other. Merging these two system test results removes the
confusion.
(cherry picked from commit 29d7c6e449)
The only reason for including the gssapi.h from the dst/gssapi.h header
was to get the typedefs of gss_cred_id_t and gss_ctx_id_t. Instead of
using those types directly this commit introduces dns_gss_cred_id_t and
dns_gss_ctx_id_t types that are being used in the public API and
privately retyped to their counterparts when we actually call the gss
api.
This also conceals the gssapi headers, so users of the libdns library
doesn't have to add GSSAPI_CFLAGS to the Makefile when including libdns
dst API.
This commit fix a leak which was happening every time an inline-signed
zone was added to the configuration, followed by a rndc reconfig.
During the reconfig process, the secure version of every inline-signed
zone was "moved" to a new view upon a reconfig and it "took the raw
version along", but only once the secure version was freed (at shutdown)
was prev_view for the raw version detached from, causing the old view to
be released as well.
This caused dangling references to be kept for the previous view, thus
keeping all resources used by that view in memory.
Test for Ed25519 and Ed448. If both algorithms are not supported, skip
test. If only one algorithm is supported, run test, skip the
unsupported algorithm. If both are supported, run test normally.
Create new ns3. This will test Ed448 specifically, while now ns2 only
tests Ed25519. This moves some files from ns2/ to ns3/.
(cherry picked from commit 8bf31d0592)
The number of queries to use in the burst can be reduced, as we have
a very low fetch limit of 1.
The dig command in 'wait_for_fetchlimits()' should time out sooner as
we expect a SERVFAIL to be returned promptly.
Enabling serve-stale can be done before hitting fetch-limits. This
reduces the chance that the resolver queries time out and fetch count
is reset. The chance of that happening is already slim because
'resolver-query-timeout' is 10 seconds, but better to first let the
data become stale rather than doing that while attempting to resolve.
(cherry picked from commit 00f575e7ef)
Add a test case when fetch-limits are reached and we have stale data
in cache.
This test starts with a positive answer for 'data.example/TXT' in
cache.
1. Reload named.conf to set fetch limits.
2. Disable responses from the authoritative server.
3. Now send a batch of queries to the resolver, until hitting the
fetch limits. We can detect this by looking at the response RCODE,
at some point we will see SERVFAIL responses.
4. At that point we will turn on serve-stale.
5. Clients should see stale answers now.
6. An incoming query should not set the stale-refresh-time window,
so a following query should still get a stale answer because of a
resolver failure (and not because it was in the stale-refresh-time
window).
(cherry picked from commit 11b74fc176)
The 'legacy-keys.kasp' test checks that a zone with key files but not
yet state files is signed correctly. This test is expanded to cover
the case where old key files still exist in the key directory. This
covers bug #2406 where keys with the "Delete" timing metadata are
picked up by the keymgr as active keys.
Fix the 'legacy-keys.kasp' test, by creating the right key files
(for zone 'legacy-keys.kasp', not 'legacy,kasp').
Use a unique policy for this zone, using shorter lifetimes.
Create two more keys for the zone, and use 'dnssec-settime' to set
the timing metadata in the past, long enough ago so that the keys
should not be considered by the keymgr.
Update the 'key_unused()' test function, and consider keys with
their "Delete" timing metadata in the past as unused.
Extend the test to ensure that the keys to be used are not the old
predecessor keys (with their "Delete" timing metadata in the past).
Update the test so that the checks performed are consistent with the
newly configured policy.
(cherry picked from commit d4b2b7072d)
This commit add 4 tests for the new option:
1. Test default configuration of stale-answer-client-timeout, a
value of 1.8 seconds, with stale-refresh-time disabled.
2. Test disabling of stale-answer-client-timeout.
3. Test stale-answer-client-timeout with a value of zero, in this
case we take advantage of a log entry which shows that a stale
answer was promptly used before an attempt to refresh the RRset
is made. We also check, by activating a disabled authoritative
server, that the RRset was successfully refreshed after that.
4. Test stale-answer-client-timeout 0 with stale-refresh-time 4, in
this test we want to ensure a couple things:
- If we have a stale RRSet entry in cache, a request must be
promptly answered with this data, while BIND must also attempt
to refresh the RRSet in background.
- If the attempt to refresh the RRSet times out, the RRSet must
have its stale-refresh-time window activated.
- If a new request for the same RRSet arrives, it must be
promptly answered with stale data due to stale-refresh-time
being active for this RRSet, in this case no attempt to refresh
the RRSet is made.
- Enable authoritative server, ensure that the RRSet was not
refreshed, to honor stale-refresh-time.
- Wait for stale-refresh-window time pass, send another request
for the same RRSet, this time we expect the answer to be the
stale entry in cache being hit due to
stale-answer-client-timeout 0.
- Send another request, this time we expect the answer to be an
active RRSet, since it must have been refreshed during the
previous request.
(cherry picked from commit 35fd039d03)
After the addition of stale-answer-client-timeout a test was broken due
to the following behavior expected by the test.
1. Prime cache data.example txt.
2. Disable authoritative server.
3. Send a query for data.example txt.
4. Recursive server will timeout and answer from cache with stale RRset.
5. Recursive server will activate stale-refresh-time due to the previous
failure in attempting to refresh the RRset.
6. Send a query for data.example txt.
7. Expect stale answer from cache due to stale-refresh-time
window being active, even if authoritative server is up.
Problem is that in step 4, due to the new option
stale-answer-client-timeout, recursive server will answer with stale
data before the actual fetch completes.
Since the original fetch is still running in background, if we re-enable
the authoritative server during that time, the RRset will actually be
successfully refreshed, and stale-refresh-window will not be activated.
The next queries will fail because they expect the TTL of the RRset to
match the one in the stale cache, not the one just refreshed.
To solve this, we explicitly disable stale-answer-client-timeout for
this test, as it's not the feature we are interested in testing here
anyways.
(cherry picked from commit a12bf4b61b)
