Cherry-pick small fixup commit from 9.18/9.16 branches needed for
thread-safety. This fixup commit is not needed for 9.19+ because of
reworked application setup, but it decouples isc_iterated_hash and
isc_md units and keeps all the branches in sync.
As this code is on hot path (NSEC3) this introduces an additional
optimization of the EVP_MD API - instead of calling EVP_MD_CTX_new() on
every call to isc_iterated_hash(), we create two thread_local objects
for each thread - a basectx and mdctx, initialize basectx once and then
use EVP_MD_CTX_copy_ex() to flip the initialized state into mdctx. This
saves us couple more valuable microseconds from the isc_iterated_hash()
call.
If the OpenSSL SHA1_{Init,Update,Final} API is still available, use it.
The API has been deprecated in OpenSSL 3.0, but it is significantly
faster than EVP_MD API, so make an exception here and keep using it
until we can't.
Instead of going through another layer, use OpenSSL EVP_MD API directly
in the isc_iterated_hash() implementation. This shaves off couple of
microseconds in the microbenchmark.
The implicit algorithm fetch causes a lock contention and significant
slowdown for small input buffers. For more details, see:
https://github.com/openssl/openssl/issues/19612
Instead of using EVP_DigestInit_ex() initialize empty MD_CTX objects for
each algorithm and use EVP_MD_CTX_copy_ex() to initialize MD_CTX from a
static copy. Additionally avoid implicit algorithm fetching by using
EVP_MD_fetch() for OpenSSL 3.0.
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
The .view (and possibly .prev_view) would be kept attached to the
removed zone until the zone is fully removed from the memory in
zone_free(). If this process is delayed because server is busy
something else like doing constant `rndc reconfig`, it could take
seconds to detach the view, possibly keeping multiple dead views in the
memory. This could quickly lead to a massive memory bloat.
Release the views early in the zone_shutdown() call, and don't wait
until the zone is freed.
During XoT it is important to check for "dot" ALPN tag to be
negotiated (according to the RFC 9103). We were doing that, however, the
situation was not handled properly, leading to non-cancelled zone
transfers that would crash (abort()) BIND on shutdown.
In this particular case 'result' might equal 'ISC_R_SUCCESS'. When
this is the case, the part of the code supposed to handle failures
will not cancel the zone transfer.
This situation cannot happen when BIND is a secondary of other BIND
instance. Only primaries following the RFC not closely enough could
trigger such a behaviour.
As shown in the previous commit, using sizeof(type_t) is a little
bit more error-prone when copy-pasting code, so extracting the
size information from the pointer which is being dealt with seems
like a better alternative.
Free 'sizeof(dns_forwarder_t)' bytes of memory instead of
'sizeof(dns_sockaddr_t)' bytes, because `fwd` is a pointer
to a 'dns_forwarder_t' type structure.
Prefer the pthread_barrier implementation on platforms where it is
available over uv_barrier implementation. This also solves the problem
with thread sanitizer builds on macOS that doesn't have pthread barrier.
We already have a synchronization mechanism when starting the UDP and
TCP listener children - barriers. Change how we start the first-born
child (tid == 0), so we don't have to race for sock->parent->result and
sock->parent->fd.
Change the per-socket inactive uvreq cache (implemented as isc_astack)
to per-worker memory pool.
Change the per-socket inactive nmhandle cache (implemented as
isc_astack) to unlocked per-socket ISC_LIST.
Always track the per-worker sockets in the .active_sockets field in the
isc__networker_t struct and always track the per-socket handles in the
.active_handles field ian the isc_nmsocket_t struct.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
- Use separate EVP_PKEY for public and private keys
- On private key load, generate public key allowing better consistency
- Support OpenSSL3 providers
- Clean up key construction abstraction
- Various other clean ups
The ns_client_aclchecksilent is used to check multiple ACLs before
the decision is made that a query is denied. It is also used to
determine if recursion is available. In those cases we should not
set the extended DNS error "Prohibited".
Instead of trying to optimize by using a stack local variable
with additional #ifdef logic, use identical implementations of
the upstream functions to reduce #ifdef clutter.
Move the definitions from dst_openssl.h to openssl_shim.h where
rest of the shim is.
Instead of trying to enforce one pkey to contain both a private
and a public key pair, refactor the code to have separate public
and private pkeys.
This is a prerequisite for proper openssl 3.0 providers support
and greatly simplifies the code.
The dns_zonemgr_releasezone() function makes a decision to destroy
'zmgr' (based on its references count, after decreasing it) inside
a lock, and then destroys the object outside of the lock.
This causes a race with dns_zonemgr_detach(), which could destroy
the object in the meantime.
Change dns_zonemgr_releasezone() to detach from 'zmgr' and destroy
the object (if needed) using dns_zonemgr_detach(), outside of the
lock.
- Make it a separate opensslrsa_check_exponent_bits() function to
clean up the code a bit
- Always use provider API first if using openssl 3.0, and fallback
to EVP API for older openssl or if built with engine support
- Use RSA_get0_key() (with shim for openssl 1.0) to avoid memory
allocations
In the previous refactoring, the findnodeintree() function could return
ISC_R_EXISTS (from dns_db_addnode() call) instead of ISC_R_SUCCESS
leading to node being attached, but never detached.
Change the ISC_R_EXISTS result code returned from dns_rbt_addnode() to
the ISC_R_SUCCESS in the findnodeintree() function (called internally by
dns_db_findnode() and dns_db_findnsec3node()).
With 'stale-answer-enable yes;' and 'stale-answer-client-timeout off;',
consider the following situation:
A CNAME record and its target record are in the cache, then the CNAME
record expires, but the target record is still valid.
When a new query for the CNAME record arrives, and the query fails,
the stale record is used, and then the query "restarts" to follow
the CNAME target. The problem is that the query's multiple stale
options (like DNS_DBFIND_STALEOK) are not reset, so 'query_lookup()'
treats the restarted query as a lookup following a failed lookup,
and returns a SERVFAIL answer when there is no stale data found in the
cache, even if there is valid non-stale data there available.
With this change, query_lookup() now considers non-stale data in the
cache in the first place, and returns it if it is available.
On some platforms, when a synchronizing barrier is cleared, one
thread can progress while other threads are still in the process
of releasing the barrier. If a barrier is reused by the progressing
thread during this window, it can cause a deadlock. This can occur if,
for example, we stop listening immediately after we start, because the
stop and listen functions both use socket->barrier. This has been
addressed by using separate barrier objects for stop and listen.
There were couple of redundant macros on both sides of
DNS_RBTDB_STRONG_RWLOCK_CHECK #ifdef block. Use a single set of
macros, but disable the extra REQUIRES if the #define is not set.
Extend the expire_header() to accept the node lock type as one of the
arguments and check whether the the node lock is always write locked +
fix that bug.
While doing that, it was found that expire_header() invocation in
rdataset_expire() passes `false` as a type of tree lock instead of
`isc_rwlocktype_none`.
(Un)fortunately, both values mapped to 0, so no harm was done, but it
has been fixed nevertheless.
There was a repetetive pattern:
if (NODE_TRYUPGRADE(&nodelock->lock, nlocktypep) != ISC_R_SUCCESS)
{
NODE_UNLOCK(&nodelock->lock, nlocktypep);
NODE_WRLOCK(&nodelock->lock, nlocktypep);
}
Instead of doing that over again, introduce new NODE_FORCEUPGRADE()
and TREE_FORCEUPGRADE() that does exactly this code, and simplify
the aforementioned code with just:
NODE_FORCEUPGRADE(&nodelock->lock, nlocktypep);
