BIND unconditionally uses shims for BN_GENCB_new(), BN_GENCB_free(),
and BN_GENCB_get_arg() for all LibreSSL versions and, correctly, for
OpenSSL <1.1.0 versions.
This breaks LibreSSL compilation starting with LibreSSL 3.5.0.
Use autoconf check instead to check whether the family of the functions
are available.
(cherry picked from commit 749973f3259b7638a6af02b7da2f40ae28bdd402)
LibreSSL 3.5.0 fails to compile with these shims. We could have just
removed the LibreSSL check from the pre-processor condition, but it
seems that these shims are no longer needed because all the supported
versions of OpenSSL and LibreSSL have those functions.
According to EVP_ENCRYPTINIT(3) manual page in LibreSSL,
EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() first appeared in
OpenSSL 0.9.8b, and have been available since OpenBSD 4.5.
(cherry picked from commit a3789053682b57a2031de8c544134f1923e76cf3)
this is similar to the input found by ClusterFuzz Issue 45027 with
the 0xff characters replaced for readability.
(cherry picked from commit d36938321e)
when parsing key pairs, if the '=' character fell at max_token
a protective INSIST preventing buffer overrun could be triggered.
Attempt to grow the buffer immediately before the INSIST.
Also removed an unnecessary INSIST on the opening double quote
of key buffer pair.
(cherry picked from commit 4c356d2770)
By default C promotes short unsigned values to signed int which
leads to undefined behaviour when the value is shifted by too much.
Force unsigned arithmetic to be perform by explicitly casting to a
unsigned type.
(cherry picked from commit b8b99603f1)
The isc__nmsocket_reset() was missing a case for raw TCP sockets (used
by RNDC and DoH) which would case a assertion failure when write timeout
would be triggered.
TCP sockets are now also properly handled in isc__nmsocket_reset().
(cherry picked from commit b220fb32bd)
When isc__nm_uvreq_t gets deactivated, it could be just put onto array
stack to be reused later to save some initialization time.
Unfortunately, this might hide some use-after-free errors.
Disable the inactive uvreqs caching when compiled with Address or
Thread Sanitizer.
(cherry picked from commit be339b3c83)
When isc_nmhandle_t gets deactivated, it could be just put onto array
stack to be reused later to safe some initialization time.
Unfortunately, this might hide some use-after-free errors.
Disable the inactive handles caching when compiled with Address or
Thread Sanitizer.
(cherry picked from commit 92cce1da65)
The isc__nmsocket_t has locked array of isc_nmhandle_t that's not used
for anything. The isc__nmhandle_get() adds the isc_nmhandle_t to the
locked array (and resized if necessary) and removed when
isc_nmhandle_put() finally destroys the handle. That's all it does, so
it serves no useful purpose.
Remove the .ah_handles, .ah_size, and .ah_frees members of the
isc__nmsocket_t and .ah_pos member of the isc_nmhandle_t struct.
(cherry picked from commit e2555a306f)
When the TCP, TCPDNS or TLSDNS connection times out, the isc__nm_uvreq_t
would be pushed into sock->inactivereqs before the uv_tcp_connect()
callback finishes. Because the isc__nmsocket_t keeps the list of
inactive isc__nm_uvreq_t, this would cause use-after-free only when the
sock->inactivereqs is full (which could never happen because the failure
happens in connection timeout callback) or when the sock->inactivereqs
mechanism is completely removed (f.e. when running under Address or
Thread Sanitizer).
Delay isc__nm_uvreq_t deallocation to the connection callback and only
signal the connection callback should be called by shutting down the
libuv socket from the connection timeout callback.
(cherry picked from commit 3268627916)
When the isc_netmgr is being destroyed, the normal and priority queues
should be dequeued and netievents properly freed. This wasn't the case.
(cherry picked from commit 88418c3372)
Commit aab691d512 did not fix all possible
scenarios in which the ns_statscounter_recursclients counter underflows.
The solution implemented therein can be ineffective e.g. when CNAME
chaining happens with prefetching enabled.
Here is an example recursive resolution scenario in which the
ns_statscounter_recursclients counter can underflow with the current
logic in effect:
1. Query processing starts, the answer is not found in the cache, so
recursion is started. The NS_CLIENTATTR_RECURSING attribute is set.
ns_statscounter_recursclients is incremented (Δ = +1).
2. Recursion completes, returning a CNAME. client->recursionquota is
non-NULL, so the NS_CLIENTATTR_RECURSING attribute remains set.
ns_statscounter_recursclients is decremented (Δ = 0).
3. Query processing restarts.
4. The current QNAME (the target of the CNAME from step 2) is found in
the cache, with a TTL low enough to trigger a prefetch.
5. query_prefetch() attaches to client->recursionquota.
ns_statscounter_recursclients is not incremented because
query_prefetch() does not do that (Δ = 0).
6. Query processing restarts.
7. The current QNAME (the target of the CNAME from step 4) is not found
in the cache, so recursion is started. client->recursionquota is
already attached to (since step 5) and the NS_CLIENTATTR_RECURSING
attribute is set (since step 1), so ns_statscounter_recursclients is
not incremented (Δ = 0).
8. The prefetch from step 5 completes. client->recursionquota is
detached from in prefetch_done(). ns_statscounter_recursclients is
not decremented because prefetch_done() does not do that (Δ = 0).
9. Recursion for the current QNAME completes. client->recursionquota
is already detached from, i.e. set to NULL (since step 8), and the
NS_CLIENTATTR_RECURSING attribute is set (since step 1), so
ns_statscounter_recursclients is decremented (Δ = -1).
Another possible scenario is that after step 7, recursion for the target
of the CNAME from step 4 completes before the prefetch for the CNAME
itself. fetch_callback() then notices that client->recursionquota is
non-NULL and decrements ns_statscounter_recursclients, even though
client->recursionquota was attached to by query_prefetch() and therefore
not accompanied by an incrementation of ns_statscounter_recursclients.
The net result is also an underflow.
Instead of trying to properly handle all possible orderings of events
set into motion by normal recursion and prefetch-triggered recursion,
adjust ns_statscounter_recursclients whenever the recursive clients
quota is successfully attached to or detached from. Remove the
NS_CLIENTATTR_RECURSING attribute altogether as its only purpose is made
obsolete by this change.
(cherry picked from commit f7482b68b9)
Extend the timeouts system test to ensure that the maximum outgoing
transfer time (max-transfer-time-out) and maximum outgoing transfer idle
time (max-transfer-idle-out) works as expected. This is done by
lowering the limits to 5/1 minutes and testing that the connection has
been dropped while sleeping between the individual XFR messages.
(cherry picked from commit 8fed1b6461)
While refactoring the libns to use the new network manager, the
max-transfer-*-out options were not implemented and they were turned
non-operational.
Reimplement the max-transfer-idle-out functionality using the write
timer and max-transfer-time-out using the new isc_nm_timer API.
(cherry picked from commit 8643bbab84)
While refactoring the lib/ns/xfrout.c, it was discovered that .shutdown
and .shutdown_arg members of ns_client_t structure are unused.
Remove the unused members and associated code that was using in it in
the ns_xfrout.
(cherry picked from commit 037549c405)
Use the isc_nmhandle_setwritetimeout() function in the netmgr unit test
to allow more time for writing and reading the responses because some of
the intervals that are used in the unit tests are really small leaving a
little room for any delays.
(cherry picked from commit ee359d6ffa)
In some situations (unit test and forthcoming XFR timeouts MR), we need
to modify the write timeout independently of the read timeout. Add a
isc_nmhandle_setwritetimeout() function that could be called before
isc_nm_send() to specify a custom write timeout interval.
(cherry picked from commit a89d9e0fa6)
Extend the timeouts system test that bursts the queries for large TXT
record and never read any responses back filling up the server TCP write
buffer. The test should work with the default wmem_max value on
Linux (208k).
(cherry picked from commit b735182ae0)
When the outgoing TCP write buffers are full because the other party is
not reading the data, the uv_write() could wait indefinitely on the
uv_loop and never calling the callback. Add a new write timer that uses
the `tcp-idle-timeout` value to interrupt the TCP connection when we are
not able to send data for defined period of time.
(cherry picked from commit 408b362169)
Aram Sargsyan
Mark Andrews
Ondřej Surý
Michał Kępień
Matthijs Mekking
Petr Špaček
Evan Hunt