When named restarts, it will examine signed zones and checks if the
current denial of existence strategy matches the dnssec-policy. If not,
it will schedule to create a new NSEC(3) chain.
However, on startup the zone database may not be read yet, fooling
BIND that the denial of existence chain needs to be created. This
results in a replacement of the previous NSEC(3) chain.
Change the code such that if the NSEC3PARAM lookup failed (the result
did not return in ISC_R_SUCCESS or ISC_R_NOTFOUND), we will try
again later. The nsec3param structure has additional variables to
signal if the lookup is postponed. We also need to save the signal
if an explicit resalt was requested.
In addition to the two added boolean variables, we add a variable to
store the NSEC3PARAM rdata. This may have a yet to be determined salt
value. We can't create the private data yet because there may be a
mismatch in salt length and the NULL salt value.
When we rewrote the zone dumping to use the separate threadpool, the
dumping would acquire the read lock for the whole time the zone dumping
process is dumping the zone.
When combined with incoming IXFR that tries to acquire the write lock on
the same rwlock, we would end up blocking all the other readers.
In this commit, we pause the dbiterator every time we get next record
and before start dumping it to the disk.
While cleaning up the usage of HAVE_UV_<func> macros, we forgot to
cleanup the HAVE_UV_UDP_CONNECT in the actual code and
HAVE_UV_TRANSLATE_SYS_ERROR and this was causing Windows build to fail
on uv_udp_send() because the socket was already connected and we were
falsely assuming that it was not.
The platforms with autoconf support were not affected, because we were
still checking for the functions from the configure.
This commit adds the ability to consolidate HTTP/2 write requests if
there is already one in flight. If it is the case, the code will
consolidate multiple subsequent write request into a larger one
allowing to utilise the network in a more efficient way by creating
larger TCP packets as well as by reducing TLS records overhead (by
creating large TLS records instead of multiple small ones).
This optimisation is especially efficient for clients, creating many
concurrent HTTP/2 streams over a transport connection at once. This
way, the code might create a small amount of multi-kilobyte requests
instead of many 50-120 byte ones.
In fact, it turned out to work so well that I had to add a work-around
to the code to ensure compatibility with the flamethrower, which, at
the time of writing, does not support TLS records larger than two
kilobytes. Now the code tries to flush the write buffer after 1.5
kilobyte, which is still pretty adequate for our use case.
Essentially, this commit implements a recommendation given by nghttp2
library:
https://nghttp2.org/documentation/nghttp2_session_mem_send.html
Add a call to posix_fadvise() to indicate to the kernel, that `named`
won't be needing the dumped zone files any time soon with:
* POSIX_FADV_DONTNEED - The specified data will not be accessed in the
near future.
Notes:
POSIX_FADV_DONTNEED attempts to free cached pages associated with the
specified region. This is useful, for example, while streaming large
files. A program may periodically request the kernel to free cached
data that has already been used, so that more useful cached pages are
not discarded instead.
Previously, dumping the zones to the files were quantized, so it doesn't
slow down network IO processing. With the introduction of network
manager asynchronous threadpools, we can move the IO intensive work to
use that API and we don't have to quantize the work anymore as it the
file IO won't block anything except other zone dumping processes.
The libuv has a support for running long running tasks in the dedicated
threadpools, so it doesn't affect networking IO.
This commit adds isc_nm_work_enqueue() wrapper that would wraps around
the libuv API and runs it on top of associated worker loop.
The only limitation is that the function must be called from inside
network manager thread, so the call to the function should be wrapped
inside a (bound) task.
Instead of having a configure check for every missing function that has
been added in later version of libuv, we now use UV_VERSION_HEX to
decide whether we need the shim or not.
The uv_req_get_data() and uv_req_set_data() functions were introduced in
libuv >= 1.19.0, so we need to add compatibility shims with older libuv
versions.
Rather than having an expensive 'expired' (fka 'stale_ttl') in the
rdataset structure, that is only used to be printed in a comment on
ancient RRsets, reuse the TTL field of the RRset.
Commit a83c8cb0af updated masterdump so
that stale records in "rndc dumpdb" output no longer shows 0 TTLs. In
this commit we change the name of the `rdataset->stale_ttl` field to
`rdataset->expired` to make its purpose clearer, and set it to zero in
cases where it's unused.
Add 'rbtdb->serve_stale_ttl' to various checks so that stale records
are not purged from the cache when they've been stale for RBTDB_VIRTUAL
(300) seconds.
Increment 'ns_statscounter_usedstale' when a stale answer is used.
Note: There was a question of whether 'overmem_purge' should be
purging ancient records, instead of stale ones. It is left as purging
stale records, since stale records could take up the majority of the
cache.
This submission is copyrighted Akamai Technologies, Inc. and provided
under an MPL 2.0 license.
This commit was originally authored by Kevin Chen, and was updated by
Matthijs Mekking to match recent serve-stale developments.
Once we resume a query, we should clear DNS_FETCHOPT_TRYSTALE_ONTIMEOUT
from the options to prevent triggering the stale-answer-client-timeout
on subsequent fetches.
If we don't this may cause a crash when for example when prefetch is
triggered after a query restart.
when a serve-stale answer has been sent, the client continues waiting
for a proper answer. if a final completion event for the client does
arrive, it can just be cleaned up without sending a response, similar
to a canceled fetch.
On some platforms, the __attribute__ constructor and destructor won't
take priorities and the compilation failed. On such platform would be
macOS. For this reason, the constructor/destructor in the libisc was
reworked to not use priorities, but have a single constructor and
destructor that calls the appropriate routines in correct order.
This commit removes the extra priority because it's now not needed and
it also breaks a compilation on macOS with GCC 10.
configuring with --enable-mutex-atomics flagged these incorrectly
initialised variables on systems where pthread_mutex_init doesn't
just zero out the structure.
The size of the array holding the pointers to clientmgr was created so
big it could hold the actual clientmgr objects, not just the pointer.
This commit fixes the size to be just the ncpus * sizeof(pointer).
The isc_nmiface_t type was holding just a single isc_sockaddr_t,
so we got rid of the datatype and use plain isc_sockaddr_t in place
where isc_nmiface_t was used before. This means less type-casting and
shorter path to access isc_sockaddr_t members.
At the same time, instead of keeping the reference to the isc_sockaddr_t
that was passed to us when we start listening, we will keep a local
copy. This prevents the data race on destruction of the ns_interface_t
objects where pending nmsockets could reference the sockaddr of already
destroyed ns_interface_t object.
* dns_journal_next() leaves the read point in the journal after the
transaction header so journal_seek() should be inside the loop.
* we need to recover from transaction header inconsistencies
Additionally when correcting for <size, serial0, serial1, 0> the
correct consistency check is isc_serial_gt() rather than
isc_serial_ge(). All instances updated.
According to the measurements (recorded on GL!5085), the fillcount of 2
for namepool and fillcount of 4 for rdspool can fit 99.99% of request
for tested scenarios.
This was discovered by perf recording the single second recursive test
using flamethrower where the initial malloc lit up like a flare.
Previously, as a way of reducing the contention between threads a
clientmgr object would be created for each interface/IP address.
We tasks being more strictly bound to netmgr workers, this is no longer
needed and we can just create clientmgr object per worker queue (ncpus).
Each clientmgr object than would have a single task and single memory
context.
Similarly, the resolver code would create hundreds of memory contexts
just on the resolver setup. The contention will be reduced directly in
the allocator, so for now just attach to the view memory instead of
creating separate memory context for each bucket.
Since a client object is bound to a netmgr handle, each client
will always be processed by the same netmgr worker, so we can
simplify the code by binding client->task to the same thread as
the client. Since ns__client_request() now runs in the same event
loop as client->task events, is no longer necessary to pause the
task manager before launching them.
Also removed some functions in isc_task that were not used.
The number of memory contexts created in the clientmgr was enormous. It
could easily create thousands of memory contexts because the formula was:
nprotocols * ncpus * ninterfaces * CLIENT_NMCTXS_PERCPU (8)
The original goal was to reduce the contention when allocating the
memory, but after a while nobody noticed that the amount of memory
context allocated would not reduce contention at all.
This commit removes the whole mctxpool and just uses the mctx from
clientmgr as the contention will be reduced directly in the allocator.
dns_name_copy() has been replaced nearly everywhere with
dns_name_copynf(). this commit changes the last two uses of
the original function. afterward, we can remove the old
dns_name_copy() implementation, and replace it with _copynf().
dns_message_gettempname() returns an initialized name with a dedicated
buffer, associated with a dns_fixedname object. Using dns_name_copynf()
to write a name into this object will actually copy the name data
from a source name. dns_name_clone() merely points target->ndata to
source->ndata, so it is faster, but it can lead to a use-after-free if
the source is freed before the target object is released via
dns_message_puttempname().
In a few places, clone was being used where copynf should have been;
this is now fixed.
As a side note, no memory was lost, because the ndata buffer used in
the dns_fixedname_t is internal to the structure, and is freed when
the dns_fixedname_t is freed regardless of the .ndata contents.
The last rdataset_getownercase() left it in a state where the code was
mix of microoptimizations (manual loop unrolling, complicated bitshifts)
with a code that would always rewrite the character even if it stayed
the same after transformation.
This commit makes sure that we modify only the characters that actually
need to change, removes the manual loop unrolling, and replaces the
weird bit arithmetics with a simple shift and bit-and.
dns_message_gettempname() now returns a pointer to an initialized
name associated with a dns_fixedname_t object. it is no longer
necessary to allocate a buffer for temporary names associated with
the message object.
This function has never been used since it was added to the source tree
by commit 686b27bfd3 back in 1999. As
the dns_zoneflg_t type is only defined in lib/dns/zone.c, no function
external to that file would be able to use dns_zone_setflag() properly
anyway - the DNS_ZONE_SETFLAG() and DNS_ZONE_CLRFLAG() macros should be
used instead. Zone options that can be set from outside zone.c are set
using dns_zone_setoption().
Don't allow the same zone with different dnssec-policies in separate
views have the same key-directory.
Track zones plus key-directory in a symtab and if there is a match,
check the offending zone's dnssec-policy name. If the name is "none"
(there is no kasp for the offending zone), or if the name is the same
(the zone shares keys), it is fine, otherwise it is an error (zones
in views using different policies cannot share the same key-directory).
if dns_updatemethod_date is used do that the returned method is only
set to dns_updatemethod_increment if the new serial does not encode
the current day (YYYYMMDDXX).
Instead of using fixed quantum, this commit adds atomic counter for
number of items on each queue and uses the number of netievents
scheduled to run as the limit of maximum number of netievents for a
single process_queue() run.
This prevents the endless loops when the netievent would schedule more
netievents onto the same loop, but we don't have to pick "magic" number
for the quantum.
This commit adds a new configuration option to set the receive and send
buffer sizes on the TCP and UDP netmgr sockets. The default is `0`
which doesn't set any value and just uses the value set by the operating
system.
There's no magic value here - set it too small and the performance will
drop, set it too large, the buffers can fill-up with queries that have
already timeouted on the client side and nobody is interested for the
answer and this would just make the server clog up even more by making
it produce useless work.
The `netstat -su` can be used on POSIX systems to monitor the receive
and send buffer errors.
Matthijs Mekking
Ondřej Surý
Mark Andrews
Ondřej Surý
Artem Boldariev
Kevin ChenandEvan Hunt