The CHAIN and REPORT-CHANNEL EDNS options are both domain names so they
can be combined. THE CLIENT-TAG and SERVER-TAG EDNS options are both 16
bit integers so they can be combined.
When a server name turns out to be a CNAME or DNAME, the ADB does not use it, but the `dns_adbname` structure still stored a copy of the target name. This is unnecessary and the code has been removed.
Merge branch 'each-remove-adb-target' into 'main'
See merge request isc-projects/bind9!10149
the target name parameter to dns_adb_createfind() was always passed as
NULL, so we can safely remove it.
relatedly, the 'target' field in the dns_adbname structure was never
referenced after being set. the 'expire_target' field was used, but
only as a way to check whether an ADB name represents a CNAME or DNAME,
and that information can be stored as a single flag.
The dual-stack-servers configuration option was not working as expected; the specified servers were not being used when they should have been, leading to resolution failures. This has been fixed.
Closes#5019
Merge branch '5019-dual-stack-servers-wasn-t-working-in-all-cases' into 'main'
See merge request isc-projects/bind9!9708
Now that fctx_try is being called when adb returns DNS_ADB_NOMOREADDRESSES
we don't need these priming queries for the dual-stack-servers test
to succeed.
Named was stopping nameserver address resolution attempts too soon
when dual stack servers are configured. Dual stack servers are
used when there are *not* addresses for the server in a particular
address family so find->status == DNS_ADB_NOMOREADDRESSES is not a
sufficient stopping condition when dual stack servers are available.
Call fctx_try to see if the alternate servers can be used.
DNSKEY, KEY, RRSIG and SIG constraints have been relaxed to allow empty key and signature material after the algorithm identifier for PRIVATEOID and PRIVATEDNS. It is arguable whether this falls within the expected use of these types as no key material is shared and the signatures are ineffective but these are private algorithms and they can be totally insecure.
Closes#5167
Merge branch '5167-relax-private-dnskey-constraints' into 'main'
See merge request isc-projects/bind9!10083
DNSKEY, KEY, RRSIG and SIG constraints have been relaxed to allow
empty key and signature material after the algorithm identifier for
PRIVATEOID and PRIVATEDNS. It is arguable whether this falls within
the expected use of these types as no key material is shared and
the signatures are ineffective but these are private algorithms and
they can be totally insecure.
The `NS_QUERY_DONE_BEGIN` and `NS_QUERY_DONE_SEND` plugin hooks could cause a reference leak if they returned `NS_HOOK_RETURN` without cleaning up the query context properly.
Closes#2094
Merge branch '2094-plugin-reference-leak' into 'main'
See merge request isc-projects/bind9!9971
if the NS_QUERY_DONE_BEGIN or NS_QUERY_DONE_SEND hook is
used in a plugin and returns NS_HOOK_RETURN, some of the
cleanup in ns_query_done() can be skipped over, leading
to reference leaks that can cause named to hang on shut
down.
this has been addressed by adding more housekeeping
code after the cleanup: tag in ns_query_done().
dnssec-signzone could dereference a NULL key pointer when resigning a zone. This has been fixed.
Closes#5192
Merge branch '5192-dnssec-signzone-needs-to-check-for-a-null-key-when-setting-offline' into 'main'
See merge request isc-projects/bind9!10161
Several functions in the `dns_name` module have had parameters removed, that were rarely or never used:
- `dns_name_fromtext()` and `dns_name_concatenate()` no longer take a target buffer.
- `dns_name_towire()` no longer takes a compression offset pointer; this is now part of the compression context.
- `dns_name_towire()` with a `NULL` compression context will copy name data directly into a buffer with no processing.
Merge branch 'each-simplify-names' into 'main'
See merge request isc-projects/bind9!10152
previously, dns_name_fromtext() took both a target name and an
optional target buffer parameter, which could override the name's
dedicated buffer. this interface is unnecessarily complex.
we now have two functions, dns_name_fromtext() to convert text
into a dns_name that has a dedicated buffer, and dns_name_wirefromtext()
to convert text into uncompressed DNS wire format and append it to a
target buffer.
in cases where it really is necessary to have both, we can use
dns_name_fromtext() to load the dns_name, then dns_name_towire()
to append the wire format to the target buffer.
dns_name_fromtext() stores the converted name in the 'name'
passed to it, and optionally also copies it in wire format to
a buffer 'target'. this makes the interface unnecessarily
complex, and could be simplified by having a different function
for each purpose. as a first step, remove uses of the target
buffer in calls to dns_name_fromtext() where it wasn't actually
needed.
the target buffer passed to dns_name_concatenate() was never
used (except for one place in dig, where it wasn't actually
needed, and has already been removed in a prior commit).
we can safely remove the parameter.
this parameter was added as a (minor) optimization for
cases where dns_name_towire() is run repeatedly with the
same compression context, as when rendering all of the rdatas
in an rdataset. it is currently only used in one place.
we now simplify the interface by removing the extra parameter.
the compression offset value is now part of the compression
context, and can be activated when needed by calling
dns_compress_setmultiuse(). multiuse mode is automatically
deactivated by any subsequent call to dns_compress_permitted().
The `dns_rdataslab_fromrdataset()` function creates a slab from an rdataset. If the source rdataset already uses a slab, then no processing is necessary; we can just copy the existing slab to a new location.
Closes#5188
Merge branch '5188-optimize-makeslab' into 'main'
See merge request isc-projects/bind9!10162
the dns_rdataslab_fromrdataset() function creates a slab
from an rdataset. if the source rdataset already uses a slab,
then no processing is necessary; we can just copy the existing
slab to a new location.
Previously, if a new counter was added to the hashtable
while dumping recursing clients via the `rndc recursing`
command, and `fetches-per-zone` was enabled, an assertion
failure could occur. This has been fixed.
Closes#5200
Merge branch '5200-destroy-iterator-inside-the-rwlock' into 'main'
See merge request isc-projects/bind9!10164
Previously, the hashmap iterator for fetches-per-zone was destroy
outside the rwlock. This could lead to an assertion failure due to a
timing race with the internal rehashing of the hashmap table as the
rehashing process requires no iterators to be running when rehashing the
hashmap table. This has been fixed by moving the destruction of the
iterator inside the read locked section.
The memory used to internally store the DNS names has been reduced.
Merge branch 'ondrej/experiment-no-offsets-in-dns_name' into 'main'
See merge request isc-projects/bind9!10140
The third argument to set_offsets() was only used in
dns_name_fromregion() and not really needed. We can remove the third
argument and then manually check whether the last label is root label.
There was just a single use of passing an extra buffer to
dns_name_downcase() which have been replaced by simple call to
isc_ascii_lowercase() and the 'target' argument from dns_name_downcase()
function has been removed.
The MAKE_EMPTY() macro was clearing up the output variable in case of
the failure. However, this was breaking the usual design pattern that
the output variables are left in indeterminate state or we don't touch
them at all when a failure occurs. Remove the macro and change the
dns_name_downcase() to not touch the name contents until success.
There was a back-and-forth between static arrays and the pointers to the
offsets. Since we are now only using the static arrays, we can cleanup
the usage of the pointers that would previously point either to the
static array or name->offsets if available.
The offsets were meant to speed-up the repeated dns_name operations, but
it was experimentally proven that there's actually no real-world
benefit. Remove the offsets and labels fields from the dns_name and the
static offsets fields to save 128 bytes from the fixedname in favor of
calculating labels and offsets only when needed.
The old symtab implementation should have been removed in !9921, but it wasn't. This MR addresses that.
Merge branch 'alessio/cleanup-symtab-orphan-files' into 'main'
See merge request isc-projects/bind9!10122
The DNS header shows if a message has multiple questions or invalid
NOTIFY sections. We can drop these messages early, right after parsing
the question. This matches RFC 9619 for multi-question messages and
Unbound's handling of NOTIFY. We still parse the question to include it in
our FORMERR response.
Add drop_msg_early() function to check for these conditions:
- Messages with more than one question, as required by RFC 9619
- NOTIFY query messages containing answer sections (like Unbound)
- NOTIFY messages containing authority sections (like Unbound)
Closes#5158, #3656
Merge branch '5158-early-formerr-on-bad-notify-or-bad-qdcount' into 'main'
See merge request isc-projects/bind9!10056
The DNS header shows if a message has multiple questions or invalid
NOTIFY sections. We can drop these messages early, right after parsing
the question. This matches RFC 9619 for multi-question messages and
Unbound's handling of NOTIFY.
To further add further robustness, we include an additional check for
unknown opcodes, and also drop those messages early.
Add early_sanity_check() function to check for these conditions:
- Messages with more than one question, as required by RFC 9619
- NOTIFY query messages containing answer sections (like Unbound)
- NOTIFY messages containing authority sections (like Unbound)
- Unknown opcodes.
The zone file for example3 (ns1/example3.db) can be modified in the
upforwd test as example3 is updated as part of the test. Whether
the zone is written out or not by the end of the test is timing
dependent. Rename ns1/example3.db to ns1/example3.db.in and copy it to
ns1/example3.db in setup so we don't trigger post test changes checks.
Closes#5180
Merge branch '5180-create-example3-in-setup' into 'main'
See merge request isc-projects/bind9!10160
Mark Andrews
Doug FreedandMark Andrews
Evan Hunt
Ondřej Surý
Alessio Podda