Previously .txt files with full backtrace may be identified as a
crashed test:
I:Core dumps were found for the following system tests:
I: core.19948-backtrace.txt
I: shutdown
Now .txt files are removed from the list.
Change 'run.sh.in' to match the core matching pattern in
'testsummary.sh'.
(cherry picked from commit c2dcd95966)
To prevent problems with unit and system tarball tests being revealed
during release process, run these tests on schedules.
(cherry picked from commit 439fe9bc3c)
Hold a weak reference to the view so that it can't go away while
nta is performing its lookups. Cancel nta timers once all external
references to the view have gone to prevent them triggering new work.
(cherry picked from commit 0b2555e8cf)
The hash table rework MRs (!3865, !3871) increased the default RBT hash
table size from 64 to 65,536 entries (for 64-bit architectures, that is
512 bytes before vs. 524,288 bytes after). This works fine for RBTs
used for cache databases, but since three separate RBT databases are
created for every zone loaded (RRs, NSEC, NSEC3), memory usage would
skyrocket when BIND 9 is used as an authoritative DNS server with many
zones.
The default RBT hash table size before the rework was 64 entries, this
commit reduces it to 16 entries because our educated guess is that most
zones are just couple of entries (SOA, NS, A, AAAA, MX) and rehashing
small hash tables is actually cheap. The rework we did in the previous
MRs tries to avoid growing the hash tables for big-to-huge caches where
growing the hash table comes at a price because the whole cache needs to
be locked.
(cherry picked from commit 1e043a011b)
In the rare case that you have multiple keys acting as KSK and that
have the same keytag, you can now set the algorithm when calling
'-checkds'.
(cherry picked from commit 46fcd927e7)
Make sure the 'checkds' command correctly sets the right key timing
metadata and also make sure that it rejects setting the key timing
metadata if there are multiple keys with the KSK role and no key
identifier is provided.
(cherry picked from commit a43bb41909)
With 'checkds' replacing 'parent-registration-delay', the kasp
test needs the expected times to be adjusted. Also the system test
needs to call 'rndc dnssec -checkds' to progress the rollovers.
Since we pretend that the KSK is active as soon as the DS is
submitted (and parent registration delay is no longer applicable)
we can simplify the 'csk_rollover_predecessor_keytimes' function
to take only one "addtime" parameter.
This commit also slightly changes the 'check_dnssecstatus' function,
passing the zone as a parameter.
(cherry picked from commit 38cb43bc86)
Don't strip off the final character when printing times in key files.
With the introduction of 'rndc dnssec -status' we introduced
'isc_stdtime_tostring()'. This changed in behavior such that it was no
longer needed to strip of the final '\n' of the string format
datetime. However, in 'printtime()' it still stripped the final
character.
(cherry picked from commit e3eb55fd1c)
Add a new 'rndc' command 'dnssec -checkds' that allows the user to
signal named that a new DS record has been seen published in the
parent, or that an existing DS record has been withdrawn from the
parent.
Upon the 'checkds' request, 'named' will write out the new state for
the key, updating the 'DSPublish' or 'DSRemoved' timing metadata.
This replaces the "parent-registration-delay" configuration option,
this was unreliable because it was purely time based (if the user
did not actually submit the new DS to the parent for example, this
could result in an invalid DNSSEC state).
Because we cannot rely on the parent registration delay for state
transition, we need to replace it with a different guard. Instead,
if a key wants its DS state to be moved to RUMOURED, the "DSPublish"
time must be set and must not be in the future. If a key wants its
DS state to be moved to UNRETENTIVE, the "DSRemoved" time must be set
and must not be in the future.
By default, with '-checkds' you set the time that the DS has been
published or withdrawn to now, but you can set a different time with
'-when'. If there is only one KSK for the zone, that key has its
DS state moved to RUMOURED. If there are multiple keys for the zone,
specify the right key with '-key'.
(cherry picked from commit 04d8fc0143)
The only arm64 runner we have at our disposal is suffering from
intermittent connectivity issues which make it unusable for extended
periods of time. Remove arm64 jobs from GitLab CI until we manage to
set up an arm64 runner with more reliable connectivity.
(cherry picked from commit 49f245f7c0)
The named configuration files used in the "geoip2" system test cause a
rather large number of views (6-8) to be set up in each tested named
instance. Each view has its own cache.
Commit aa72c31422 caused the RBT hash
table to be pre-allocated to a size derived from "max-cache-size", so
that it never needs to be rehashed. The size of that hash table is not
expected to be significant enough to cause memory use issues in typical
conditions even for large "max-cache-size" settings.
However, these two factors combined can cause memory exhaustion issues
in GitLab CI, where we run multiple "instances" of the test suite in
parallel on the same runner, each test suite executes multiple system
tests concurrently, and each system test may potentially start multiple
named instances at the same time. In practice, this problem currently
only seems to be affecting the "geoip2" system test, which is failing
intermittently due to named instances used by that test getting killed
by oom-killer.
Prevent the "geoip2" system test from failing intermittently by setting
"max-cache-size" in named configuration files used in that test to a low
value in order to keep memory usage at bay even with a large number of
views configured.
(cherry picked from commit 4292d5bdfe)
In 9.17 we introduced 'primaries' as a synonym for 'masters' in the
configuration file. This synonym has not been backported so change
the serve-stale test to make use of the 'masters' keyword.
Add a fifth named (ns5) that runs with `stale-cache-enable no;` and
check that there are no stale records in the cache.
(cherry picked from commit abc2ab9223)
When a received RRSet has TTL 0, they would be preserved for
serve-stale (default `max-stale-cache` is 12 hours) rather than expiring
them quickly from the cache database.
This commit makes sure the RRSet didn't have TTL 0 before marking the
entry in the database as "stale".
(cherry picked from commit 6ffa2ddae0)
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
(cherry picked from commit ce53db34d6)
Now that the log message has been printed set the result code to
DNS_R_FORMERR. We don't do this via dns_result_torcode() as we
don't want upstream errors to produce FORMERR if that processing
end with DNS_R_BADTSIG.
(cherry picked from commit 20488d6ad3)
The basic scenario for the problem was that in the process of
resolving a query, if any rrset was eligible for prefetching, then it
would trigger a call to query_prefetch(), this call would run in
parallel to the normal query processing.
The problem arises due to the fact that both query_prefetch(), and,
in the original thread, a call to ns_query_recurse(), try to attach
to the recursionquota, but recursing client stats counter is only
incremented if ns_query_recurse() attachs to it first.
Conversely, if fetch_callback() is called before prefetch_done(),
it would not only detach from recursionquota, but also decrement
the stats counter, if query_prefetch() attached to te quota first
that would result in a decrement not matched by an increment, as
expected.
To solve this issue an atomic bool was added, it is set once in
ns_query_recurse(), allowing fetch_callback() to check for it
and decrement stats accordingly.
For a more compreensive explanation check the thread comment below:
https://gitlab.isc.org/isc-projects/bind9/-/issues/1719#note_145857
When a new IPv6 interface/address appears it's first in a tentative
state - in which we cannot bind to it, yet it's already being reported
by the route socket. Because of that BIND9 is unable to listen on any
newly detected IPv6 addresses. Fix it by setting IP_FREEBIND option (or
equivalent option on other OSes) and then retrying bind() call.
(cherry picked from commit a0f7d28967)
Running system tests with root privileges is potentially dangerous.
Only allow it when explicitly requested (by building with
--enable-developer).
(cherry picked from commit 3ef106f69d)
