Since Alpine Linux 3.11 is the current Alpine Linux release, replace
Alpine Linux 3.10 GitLab CI jobs with their up-to-date counterparts.
(cherry picked from commit bebf353eb5)
Make sure carriage return characters are stripped from sed input to
enable the "forward" system test to pass on Windows.
(cherry picked from commit 075613aea4)
Before, the zero system test could get stuck almost infinitely, because
the first test sends > 300 queries with 5 seconds timeout on each in
each pass. If named crashed early, it would took the test more than 4
hours to properly timeout.
This commit introduces a "watchdog" on the dig commands running in the
background and failing the test on timeout, failing any test if any dig
command fails to return successfully, and making the tests.sh script
shellcheck clean.
(cherry picked from commit 2a65a47f39)
Previously, the fetchlimit tested the recursive-clients soft limit
that's defined as 90% of the hard limit (the actual configured value).
This worked previously because the reaping of the oldest recursive
client was put on the same event queue as the current TCP client, thus
the cleaning has happened before the new TCP client established a new
connection.
With the change in BIND 9.14 that added a multiple event queues the
cleaning of the oldests clients is no longer synchronous and could
happen stochastically making the soft limit testing fail often. The
situation became even worse with the new networking manager, thus we
change the system test to fail only if the hard limit bound is not
honored.
Changing the accounting of the already reaped TCP clients so the soft
limit testing is possible again is out of the scope for this change.
(cherry picked from commit c35a4e05fa)
Using retry_quiet to test that prefetch is disabled instead of a
standard loop with sleep 1 between each iteration.
(cherry picked from commit 994fc2e822)
These two tests were failing basically because in order for prefetching to
happen, the TTL for a given DNS record must be greater than or equal to
the prefetch config value + 9.
The previous TTL for both records was 10, while prefetch value in
configuration was 3, thus making only records with TTL >= 12 elligible
for prefetching.
TTL value for both records was adjusted to the value 13, and prefetch
value was set to 4 (inc by 1), so records with TTL (4 + 9) >= 13 are
elligible for prefetching.
Adjusting prefetch value to 4 gives the test 1 second more to avoid time
problems when sharing resources on a heavy loaded PC.
Also prefetch value in settings is now read by the script and used
by it to corrrectly calculate the amount of time needed to delay before
sending a request to trigger prefetch, adding a bit of flexibility to
fine tune the test in the future.
(cherry picked from commit a711d6f8c0)
The previous test had two problems:
1. It wasn't written specifically for testing what it was supposed to:
prefetch disabled.
2. It could fail in some circunstances if the computer's load is too
high, due to sleeps not taking parallel tests and cpu load into account.
The new test is testing prefetch disabled as follows:
1. It asks for a txt record for a given domain and takes note of the
record's TTL (which is 10).
2. It sleeps for (TTL - 5) = 5 seconds, having a window of 5 seconds to
issue new queries before the record expires from cache.
3. Three(3) queries are executed in a row, with a interval of 1 second
between them, and for each query we verify that the TTL in response is
less than the previous one, thus ensuring that prefetch is disabled (if
it were enabled this record would have been refreshed already and TTL
would be >= the first TTL).
Having a window of 5 seconds to perform 3 queries with a interval of 1
second between them gives the test a reasonable amount of time
to not suffer from a machine with heavy load.
(cherry picked from commit dd524cc893)
Some unit tests need various managers to be created before they are run.
The interface manager spawned during libns tests listens on a fixed port
number, which causes intermittent issues when multiple tests using an
interface manager are run concurrently. Make the interface manager
listen on a randomized port number to greatly reduce the risk of
multiple unit tests using the same port concurrently.
(cherry picked from commit ea7bddb4ca)
This mostly comprises of:
* using $(...) instead of `...`
* changing the directories in subshell and not ignoring `cd` return code
* handling every error gracefully instead of ignoring the return code
(cherry picked from commit 340b1d2b6b)
Michał Kępień
Ondřej SurýandMichał Kępień
Mark AndrewsandMichał Kępień
Witold KręcickiandMichał Kępień
Matthijs MekkingandMichał Kępień
Diego FronzaandMichał Kępień
Michal Nowak
Evan HuntandMichał Kępień
Ondřej SurýandMichał Kępień