Assign and then check node for NULL to address another thread
changing radix->head in the meantime.
Move 'node != NULL' check into while loop test to silence cppcheck
false positive.
Fix pointer != NULL style.
The isc_nm_cancelread() function cancels reading on a connected
socket and calls its read callback function with a 'result'
parameter of ISC_R_CANCELED.
when isc_nm_destroy() is called, there's a loop that waits for
other references to be detached, pausing and unpausing the netmgr
to ensure that all the workers' events are run, followed by a
1-second sleep. this caused a delay on shutdown which will be
noticeable when netmgr is used in tools other than named itself,
so the delay has now been reduced to a hundredth of a second.
the isc_nm_tcpconnect() function establishes a client connection via
TCP. once the connection is esablished, a callback function will be
called with a newly created network manager handle.
A TCPDNS socket creates a handle for each complete DNS message.
Previously, when all the handles were disconnected, the socket
would be closed, but the wrapped TCP socket might still have
more to read.
Now, when a connection is established, the TCPDNS socket creates
a reference to itself by attaching itself to sock->self. This
reference isn't cleared until the connection is closed via
EOF, timeout, or server shutdown. This allows the socket to remain
open even when there are no active handles for it.
- isc__nmhandle_get() now attaches to the sock in the nmhandle object.
the caller is responsible for dereferencing the original socket
pointer when necessary.
- tcpdns listener sockets attach sock->outer to the outer tcp listener
socket. tcpdns connected sockets attach sock->outerhandle to the handle
for the tcp connected socket.
- only listener sockets need to be attached/detached directly. connected
sockets should only be accessed and reference-counted via their
associated handles.
there is no need for a caller to reference-count socket objects.
they need tto be able tto close listener sockets (i.e., those
returned by isc_nm_listen{udp,tcp,tcpdns}), and an isc_nmsocket_close()
function has been added for that. other sockets are only accessed via
handles.
The ThreadSanitizer uses system synchronization primitives to check for
data race. The netmgr handle->references was missing acquire memory
barrier before resetting and reusing the memory occupied by isc_nmhandle_t.
There's a possibility of a race in TCP accepting code:
T1 accepts a connection C1
T2 accepts a connection C2
T1 tries to accept a connection C3, but we hit a quota,
isc_quota_cb_init() sets quota_accept_cb for the socket,
we return from accept_connection
T2 drops C2, but we race in quota_release with accepting C3 so
we don't see quota->waiting is > 0, we don't launch the callback
T1 accepts a connection C4, we are able to get the quota we clear
the quota_accept_cb from sock->quotacb
T1 drops C1, tries to call the callback which is zeroed, sigsegv.
Make various adjustments necessary to enable "make dist" to build a BIND
source tarball whose contents are complete enough to build binaries, run
unit & system tests, and generate documentation on Unix systems.
Known outstanding issues:
- "make distcheck" does not work yet.
- Tests do not work for out-of-tree source-tarball-based builds.
- Source tarballs are not complete enough for building on Windows.
All of the above will be addressed in due course.
Merge lib/isc/unix/ifiter_getifaddrs.c into lib/isc/unix/interfaceiter.c
and lib/isc/xoshiro128starstar.c into lib/isc/random.c. This avoids the
need for extra Automake directives required to process the "helper" *.c
files properly and makes the code more localized.
Turn the static check_bad_bits() function used by both Unix and Windows
systems into a "private" function and extract the "private" parts of
lib/isc/fsaccess.c to lib/isc/fsaccess_common_p.h. Instead of including
lib/isc/fsaccess.c from lib/isc/{unix,win32}/fsaccess.c, make the former
an independent C source file.
Rename lib/isc/fsaccess.c to lib/isc/fsaccess_common.c to prevent build
issues on Windows caused by multiple source files (lib/isc/fsaccess.c,
lib/isc/win32/fsaccess.c) being compiled into the same object file.
These changes improve consistency with the way "private" functions and
macros are treated elsewhere in the source tree.
The release notes were previously built as a separate document
(including the PDF version). It was agreed that this doesn't make much
sense, so the release notes are now included only as an appendix to the
BIND 9 ARM.
As a leftover from old TCP accept code isc_uv_import passed TCP_SERVER
flag when importing a socket on Windows.
Since now we're importing/exporting accepted connections it needs to
pass TCP_CONNECTION flag.
The SO_INCOMING_CPU is available since Linux 3.19 for getting the value,
but only since Linux 4.4 for setting the value (see below for a full
description). BIND 9 should not fail when setting the option on the
socket fails, as this is only an optimization and not hard requirement
to run BIND 9.
SO_INCOMING_CPU (gettable since Linux 3.19, settable since Linux 4.4)
Sets or gets the CPU affinity of a socket. Expects an integer flag.
int cpu = 1;
setsockopt(fd, SOL_SOCKET, SO_INCOMING_CPU, &cpu, sizeof(cpu));
Because all of the packets for a single stream (i.e., all
packets for the same 4-tuple) arrive on the single RX queue that
is associated with a particular CPU, the typical use case is to
employ one listening process per RX queue, with the incoming
flow being handled by a listener on the same CPU that is
handling the RX queue. This provides optimal NUMA behavior and
keeps CPU caches hot.
when built with "configure --enable-singletrace", named will produce
detailed query logging at the highest debug level for any query with
query ID zero.
this enables monitoring of the progress of a single query by specifying
the QID using "dig +qid=0". the "client" logging category should be set
to a low severity level to suppress logging of other queries. (the
chance of another query using QID=0 at the same time is only 1 in 2^16.)
"--enable-singletrace" turns on "--enable-querytrace" as well, so if the
logging severity is not lowered, all other queries will be logged
verbosely as well. compiling with either of these options will impair
query performance; they should only be turned on when testing or
troubleshooting.
This adds a unit test driver for BIND with Automake. It runs the unit
test program provided as its sole command line argument and then looks
for a core dump generated by that test program. If one is found, the
driver prints the backtrace into the test log.
In process_fd we lock sock->lock and then internal_accept locks mgr->lock,
in isc_sockmgr_render* functions we lock mgr->lock and then lock sock->lock,
that can cause a deadlock when accessing stats. Unlock sock->lock early in
all the internal_{send,recv,connect,accept} functions instead of late
in process_fd.
Instead of using bind() and passing the listening socket to the children
threads using uv_export/uv_import use one thread that does the accepting,
and then passes the connected socket using uv_export/uv_import to a random
worker. The previous solution had thundering herd problems (all workers
waking up on one connection and trying to accept()), this one avoids this
and is simpler.
The tcp clients quota is simplified with isc_quota_attach_cb - a callback
is issued when the quota is available.
Add recursive "test" and "unit" rules, which execute "make check"
in specific directories - "make test" runs the system tests, and
"make unit" runs the unit tests.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
With the introduction of dnssec-policy, the aforementioned tools were
either rendered obsolete, or they will be replaced with dnssec-policy
based tools. Remove the tools and the requirement to have Python
installed. Python 3 is still being used for tests, so keep the autoconf
test, but make it much simpler.
Mark Andrews
Evan Hunt
Michał Kępień
Ondřej Surý
Michal NowakandMichał Kępień
