- updated libisccc to use netmgr events
- updated rndc to use isc_nm_tcpconnect() to establish connections
- updated control channel to use isc_nm_listentcp()
open issues:
- the control channel timeout was previously 60 seconds, but it is now
overridden by the TCP idle timeout setting, which defaults to 30
seconds. we should add a function that sets the timeout value for
a specific listener socket, instead of always using the global value
set in the netmgr. (for the moment, since 30 seconds is a reasonable
timeout for the control channel, I'm not prioritizing this.)
- the netmgr currently has no support for UNIX-domain sockets; until
this is addressed, it will not be possible to configure rndc to use
them. we will need to either fix this or document the change in
behavior.
when isc_nm_destroy() is called, there's a loop that waits for
other references to be detached, pausing and unpausing the netmgr
to ensure that all the workers' events are run, followed by a
1-second sleep. this caused a noticeable delay when shutting down
rndc; so the delay has now been reduced to a hundredth of a second.
the isc_nm_tcpconnect() function establishes a client connection via
TCP. once the connection is esablished, a callback function will be
called with a newly created network manager handle.
A TCPDNS socket creates a handle for each complete DNS message.
Previously, when all the handles were disconnected, the socket
would be closed, but the wrapped TCP socket might still have
more to read.
Now, when a connection is established, the TCPDNS socket creates
a reference to itself by attaching itself to sock->self. This
reference isn't cleared until the connection is closed via
EOF, timeout, or server shutdown. This allows the socket to remain
open even when there are no active handles for it.
- isc__nmhandle_get() now attaches to the sock in the nmhandle object.
the caller is responsible for dereferencing the original socket
pointer when necessary.
- tcpdns listener sockets attach sock->outer to the outer tcp listener
socket. tcpdns connected sockets attach sock->outerhandle to the handle
for the tcp connected socket.
- only listener sockets need to be attached/detached directly. connected
sockets should only be accessed and reference-counted via their
associated handles.
there is no need for a caller to reference-count socket objects.
they need tto be able tto close listener sockets (i.e., those
returned by isc_nm_listen{udp,tcp,tcpdns}), and an isc_nmsocket_close()
function has been added for that. other sockets are only accessed via
handles.
Due to the changes introduced by the Automake migration, system tests
requiring Python (chain, pipelined, qmin, tcp), dynamic loading of
shared objects (dlzexternal, dyndb, filter-aaaa), or LMDB (nzd2nzf)
currently do not work on Windows. Temporarily disable them on that
platform by moving them from the PARALLEL_COMMON list to the
PARALLEL_UNIX list until the situation is rectified.
Without SYSTEMTESTTOP=.. lines in tests.sh scripts, SYSTEMTESTTOP is
being set to an absolute path. On Windows, this means that an absolute
Cygwin path gets passed as a command line argument to native Windows
binaries, which cannot work and causes system tests to break. Fix by
passing SYSTEMTESTTOP through cygpath on Windows, which causes that
variable to be set to an absolute "mixed mode" path (Windows path with
forward slashes).
With "make dist" producing usable source tarballs and documentation
building working again, restore the script which allows a release
tarball to be built by a GitLab CI job, only making minimal adjustments
required due to the changes in the documentation building process and
due to dropping the "version" file.
As the "configure" script is no longer stored in the Git repository, run
"autoreconf -fi" at the beginning of the respdiff job in GitLab CI in
order to enable that job to work properly.
For the time being, "make all" needs to be run before "make dist" can
succeed as parts of the documentation are generated by programs compiled
during the regular build process.
As only one source tarball is published for each BIND release, make sure
the tarball creation job in GitLab CI only contains one tarball in the
desired format among its artifacts.
Drop the TARBALL_COMPRESSOR .gitlab-ci.yml variable as it is no longer
used in the source tarball creation process.
The "srcid" file present in each BIND source tarball contains a
shortened hash of the Git commit corresponding to a given BIND release.
This allows a Git reference to be included in an archive that otherwise
lacks any Git information.
Before the move to Automake, if an "srcid" file was present in the root
source directory at the time ./configure was run, its contents were used
as the value of a compile-time constant which was then baked into BIND
binaries; otherwise, "git rev-parse" was used to determine the value of
that constant.
With Automake, a similar approach was attempted that required the
"srcid" file to be present at autoreconf time in order for it to be
used. However, note that this means that even if that file is present
in a source tarball created using "make dist", its contents are not
going to influence the value of the aforementioned compile-time constant
because autoreconf hardcodes the output of "git rev-parse" into the
configure script at autoreconf time.
To make things more clear, always use "git rev-parse" for determining
the value of the PACKAGE_SRCID compile-time constant when running
autoreconf. This causes "srcid" to be an empty string in source
tarballs built from other source tarballs, but that is not deemed to be
much of an issue as "make dist" is expected to be run from Git
repository clones. Remove stderr redirections to /dev/null to ensure
errors caused e.g. by running "make dist" from outside a Git repository
clone are not hidden. Trim the Git commit hash to 7 characters for
consistency between Unix and Windows systems.
Despite the above, ensure the "srcid" file is present in source tarballs
created using "make dist" as that file is used by the build process on
Windows.
Resolve "Correct the BIND ARM to say that the default session-key for use with 'update-policy local;' is generated at startup"
Closes#1842
See merge request isc-projects/bind9!3664
We were passing client address to dns_resolver_createfetch as a pointer
and it was saved as a pointer. The client (with its address) could be
gone before the fetch is finished, and in a very odd scenario
log_formerr would call isc_sockaddr_format() which first checks if the
address family is valid (and at this point it still is), then the
sockaddr is cleared, and then isc_netaddr_fromsockaddr is called which
fails an assertion as the address family is now invalid.
Make various adjustments necessary to enable "make dist" to build a BIND
source tarball whose contents are complete enough to build binaries, run
unit & system tests, and generate documentation on Unix systems.
Known outstanding issues:
- "make distcheck" does not work yet.
- Tests do not work for out-of-tree source-tarball-based builds.
- Source tarballs are not complete enough for building on Windows.
All of the above will be addressed in due course.
Merge lib/isc/unix/ifiter_getifaddrs.c into lib/isc/unix/interfaceiter.c
and lib/isc/xoshiro128starstar.c into lib/isc/random.c. This avoids the
need for extra Automake directives required to process the "helper" *.c
files properly and makes the code more localized.
Turn the static check_bad_bits() function used by both Unix and Windows
systems into a "private" function and extract the "private" parts of
lib/isc/fsaccess.c to lib/isc/fsaccess_common_p.h. Instead of including
lib/isc/fsaccess.c from lib/isc/{unix,win32}/fsaccess.c, make the former
an independent C source file.
Rename lib/isc/fsaccess.c to lib/isc/fsaccess_common.c to prevent build
issues on Windows caused by multiple source files (lib/isc/fsaccess.c,
lib/isc/win32/fsaccess.c) being compiled into the same object file.
These changes improve consistency with the way "private" functions and
macros are treated elsewhere in the source tree.
There was a case where an primary server sent a response
on the wrong TCP connection and failure to check the question
section resulted in a truncated zone being served.
DS records only belong at delegation points and if present
at the zone apex are invariably the result of administrative
errors. Additionally they can't be queried for with modern
resolvers as the parent servers will be queried.
