Before submitting a bug report: Please check the Issues or Discussions section to see if a similar issue or feature request has already been posted. It's likely we're already tracking it! If you’re unsure, start a discussion post first. This will help us efficiently focus on improving the project.
Collaborate respectfully: We value a constructive attitude, so please be mindful of your communication. If negativity is part of your approach, our capacity to engage may be limited. We’re here to help if you’re open to learning and communicating positively. Remember, Open WebUI is a volunteer-driven project managed by a single maintainer and supported by contributors who also have full-time jobs. We appreciate your time and ask that you respect ours.
Contributing: If you encounter an issue, we highly encourage you to submit a pull request or fork the project. We actively work to prevent contributor burnout to maintain the quality and continuity of Open WebUI.
Bug reproducibility: If a bug cannot be reproduced with a :main or :dev Docker setup, or a pip install with Python 3.11, it may require additional help from the community. In such cases, we will move it to the "issues" Discussions section due to our limited resources. We encourage the community to assist with these issues. Remember, it’s not that the issue doesn’t exist; we need your help!
Note: Please remove the notes above when submitting your post. Thank you for your understanding and support!
Installation Method
docker
Environment
Open WebUI Version: 0.4.7
Ollama (if applicable): N/A
Operating System: Not related to this problem.
Browser (if applicable): Not related to this problem.
Confirmation:
I have read and followed all the instructions provided in the README.md.
I am on the latest version of both Open WebUI and Ollama.
I have included the browser console logs.
I have included the Docker container logs.
I have provided the exact steps to reproduce the bug in the "Steps to Reproduce" section below.
Expected Behavior:
Only the version used should be downloaded.
Actual Behavior:
It downloaded all versions of the model. Including multiple platforms. Multiple formats.
Description
Bug Summary:
The all-MiniLM-L6-v2 model is a 22.7M parameter model. Somehow, the open-webui managed to use up 1.1GB of storage for this model by downloading all versions of it.
The open-webui image's size is at the level of Windows11... And now this. It is becoming really hard to host it on edge devices now. Someday I may just find out that my disk was full and the system was down thanks to it.
If the bug report is incomplete or does not follow the provided instructions, it may not be addressed. Please ensure that you have followed the steps outlined in the README.md and troubleshooting.md documents, and provide all necessary information for us to reproduce and address the issue. Thank you!
Originally created by @chemwolf6922 on GitHub (Dec 13, 2024).
Original GitHub issue: https://github.com/open-webui/open-webui/issues/7833
# Bug Report
## Important Notes
- **Before submitting a bug report**: Please check the Issues or Discussions section to see if a similar issue or feature request has already been posted. It's likely we're already tracking it! If you’re unsure, start a discussion post first. This will help us efficiently focus on improving the project.
- **Collaborate respectfully**: We value a constructive attitude, so please be mindful of your communication. If negativity is part of your approach, our capacity to engage may be limited. We’re here to help if you’re open to learning and communicating positively. Remember, Open WebUI is a volunteer-driven project managed by a single maintainer and supported by contributors who also have full-time jobs. We appreciate your time and ask that you respect ours.
- **Contributing**: If you encounter an issue, we highly encourage you to submit a pull request or fork the project. We actively work to prevent contributor burnout to maintain the quality and continuity of Open WebUI.
- **Bug reproducibility**: If a bug cannot be reproduced with a `:main` or `:dev` Docker setup, or a pip install with Python 3.11, it may require additional help from the community. In such cases, we will move it to the "issues" Discussions section due to our limited resources. We encourage the community to assist with these issues. Remember, it’s not that the issue doesn’t exist; we need your help!
Note: Please remove the notes above when submitting your post. Thank you for your understanding and support!
---
## Installation Method
docker
## Environment
- **Open WebUI Version:** 0.4.7
- **Ollama (if applicable):** N/A
- **Operating System:** Not related to this problem.
- **Browser (if applicable):** Not related to this problem.
**Confirmation:**
- [x] I have read and followed all the instructions provided in the README.md.
- [ ] I am on the latest version of both Open WebUI and Ollama.
- [ ] I have included the browser console logs.
- [ ] I have included the Docker container logs.
- [x] I have provided the exact steps to reproduce the bug in the "Steps to Reproduce" section below.
## Expected Behavior:
Only the version used should be downloaded.
## Actual Behavior:
It downloaded all versions of the model. Including multiple platforms. Multiple formats.

## Description
**Bug Summary:**
The all-MiniLM-L6-v2 model is a 22.7M parameter model. Somehow, the open-webui managed to use up 1.1GB of storage for this model by downloading all versions of it.
The open-webui image's size is at the level of Windows11... And now this. It is becoming really hard to host it on edge devices now. Someday I may just find out that my disk was full and the system was down thanks to it.
## Reproduction Details
**Steps to Reproduce:**
1. Install open-webui.
2. Vola. Your disk space is gone.
## Logs and Screenshots
**Browser Console Logs:**
N/A
**Docker Container Logs:**
N/A
**Screenshots/Screen Recordings (if applicable):**
N/A
## Additional Information
N/A
## Note
If the bug report is incomplete or does not follow the provided instructions, it may not be addressed. Please ensure that you have followed the steps outlined in the README.md and troubleshooting.md documents, and provide all necessary information for us to reproduce and address the issue. Thank you!
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Originally created by @chemwolf6922 on GitHub (Dec 13, 2024).
Original GitHub issue: https://github.com/open-webui/open-webui/issues/7833
Bug Report
Important Notes
Before submitting a bug report: Please check the Issues or Discussions section to see if a similar issue or feature request has already been posted. It's likely we're already tracking it! If you’re unsure, start a discussion post first. This will help us efficiently focus on improving the project.
Collaborate respectfully: We value a constructive attitude, so please be mindful of your communication. If negativity is part of your approach, our capacity to engage may be limited. We’re here to help if you’re open to learning and communicating positively. Remember, Open WebUI is a volunteer-driven project managed by a single maintainer and supported by contributors who also have full-time jobs. We appreciate your time and ask that you respect ours.
Contributing: If you encounter an issue, we highly encourage you to submit a pull request or fork the project. We actively work to prevent contributor burnout to maintain the quality and continuity of Open WebUI.
Bug reproducibility: If a bug cannot be reproduced with a
:mainor:devDocker setup, or a pip install with Python 3.11, it may require additional help from the community. In such cases, we will move it to the "issues" Discussions section due to our limited resources. We encourage the community to assist with these issues. Remember, it’s not that the issue doesn’t exist; we need your help!Note: Please remove the notes above when submitting your post. Thank you for your understanding and support!
Installation Method
docker
Environment
Open WebUI Version: 0.4.7
Ollama (if applicable): N/A
Operating System: Not related to this problem.
Browser (if applicable): Not related to this problem.
Confirmation:
Expected Behavior:
Only the version used should be downloaded.
Actual Behavior:
It downloaded all versions of the model. Including multiple platforms. Multiple formats.

Description
Bug Summary:
The all-MiniLM-L6-v2 model is a 22.7M parameter model. Somehow, the open-webui managed to use up 1.1GB of storage for this model by downloading all versions of it.
The open-webui image's size is at the level of Windows11... And now this. It is becoming really hard to host it on edge devices now. Someday I may just find out that my disk was full and the system was down thanks to it.
Reproduction Details
Steps to Reproduce:
Logs and Screenshots
Browser Console Logs:
N/A
Docker Container Logs:
N/A
Screenshots/Screen Recordings (if applicable):
N/A
Additional Information
N/A
Note
If the bug report is incomplete or does not follow the provided instructions, it may not be addressed. Please ensure that you have followed the steps outlined in the README.md and troubleshooting.md documents, and provide all necessary information for us to reproduce and address the issue. Thank you!