The perl modifation code for keyless.example was not deterministic
(/NXT/ matched part of signature) resulting in different error
strings being returned. Replaced /NXT/ with /A RRSIG NSEC/ and
updated expected error string,
(cherry picked from commit 69d5e22e58)
The current implementation of isc_queue uses Michael-Scott lock-free
queue that in turn uses hazard pointers. It was discovered that the way
we use the isc_queue, such complicated mechanism isn't really needed,
because most of the time, we either execute the work directly when on
nmthread (in case of UDP) or schedule the work from the matching
nmthreads.
Replace the current implementation of the isc_queue with a simple locked
ISC_LIST. There's a slight improvement - since copying the whole list
is very lightweight - we move the queue into a new list before we start
the processing and locking just for moving the queue and not for every
single item on the list.
NOTE: There's a room for future improvements - since we don't guarantee
the order in which the netievents are processed, we could have two lists
- one unlocked that would be used when scheduling the work from the
matching thread and one locked that would be used from non-matching
thread.
(cherry picked from commit 6bd025942c)
7249bad7 introduced the -c option to stat(1) command, but BSD systems
do not know about it. Replace the stat(1) command with a PERL script
that achieves the same.
Why PERL? For consistency purposes, there are more places in the
system test where we use the same method.
(cherry picked from commit fe601c5915)
Add a test case that triggers a keymgr run that will not trigger any
metadata changes. Ensure that the last status change of the key files
is unmodified.
(cherry picked from commit 7249bad706)
Check that the recursing client count is above a reasonable
minimum, as well as below a maximum, so that we can detect
bugs that cause recursion to fail too early or too often.
(cherry picked from commit 8834c44683)
The fetchlimit test depends on a resolver continuing to try UDP
and timing out while the client waits for resolution to succeed.
but since commit bb990030 (flag day 2020), a fetch will always
switch to TCP after two timeouts, unless EDNS was disabled for
the query.
This commit adds "edns no;" to server statements in the fetchlimit
resolver, to restore the behavior expected by the test.
(cherry picked from commit 81deb24deb)
RPZ NSIP and NSDNAME checks were failing with "unrecognized NS
rpz_rrset_find() failed: glue" when static or static-stub zones
where used to resolve the query name.
Add tests using stub and static-stub zones that are expected to
be filtered and not-filtered against NSIP and NSDNAME rules.
stub and static-stub queries are expected to be filtered
stub-nomatch and static-stub-nomatch queries are expected to be passed
(cherry picked from commit 30cb70c826)
The named_config_getdefault() was missing void in the function
definition. This broke clang-15 that didn't match the declaration that
had the void in the argument with the definition that hadn't.
The dig commands appear to be failing unexpectedly on some platforms
when rate limiting kicks in and the response is dropped. Correct
behaviour should be for dig to retry the query. Set +qr and capture
stdout and stderr of each of the dig commands involved.
(cherry picked from commit 614cf5a030)
In '_check_apex_dnskey' we check for each key (KEY1 to KEY4) if they
are present in the DNSKEY RRset if they should be.
However, we only grep the dig output for the first seven fields (owner,
ttl, class, type, flags, protocol, algorithm). This can be the same
for different keys.
For example, KEY1 may be KSK predecessor and KEY2 a KSK successor,
both DNSKEY records for these keys are the same up to the public key
field. This can cause test failures if KEY1 needs to be present, but
KEY2 not, because when grepping for KEY2 we will falsely detect the
key to be present (because the grep matches KEY1).
Fix the function by grepping looking for the first seven fields in the
corresponding key file and retrieve the public key part. Grep for this
in the dig output.
(cherry picked from commit 3e1d09ac66)
It might be useful to display built-in configuration with all its
values. It should make it easier to test what default values has changed
in a new release.
Related: #1326
(cherry picked from commit cf722d18b3)
The `send_done()` callback needs to access query's `link.next` pointer
when running in `+nssearch` mode, even if the query is already canceled
or serviced, which can happen when `recv_done()` happens to be called
earlier than `send_done()`.
Keep the next query's pointer before unlinking the query from the
lookup's queries list in `clear_query()` so that `send_done()` can
use it even if the query is cleared.
Printing the pointers makes it clear, for example, for which query
exactly a recv_done() or send_done() callback was called, which
helps investigating and debugging issues easier.
- var_decl: Declaring variable "tbuf" without initializer
- assign: Assigning: "target.base" = "tbuf", which points to
uninitialized data
- assign: Assigning: "r.base" = "target.base", which points to
uninitialized data
I expect it would correctly initialize length always. Add simple
initialization to silent coverity.
(cherry picked from commit 59132bd3ec)
Parser ensures new-zones-directory has qstring parameter before it can
reach this place. dir == NULL then should never happen on any
configuration. Replace silent check with insist.
(cherry picked from commit 0a7d04367a)
Recent python does not make parsetab.py successfully, because some token
regexp is starting with ?i flag. Remove that flag from regex and pass it
as extra flags parameter instead.
According to PEP 632 [1], the distutils module is considered deprecated
in Python 3.10 and will be removed in Python 3.12. Setup scripts
using it should be migrated to the setuptools module, which contains
drop-in replacements for distutils functions [2]. The catch is that the
setuptools module is not part of the Python Standard Library.
While this problem could be addressed by adding a hard dependency on
setuptools, it only affects BIND 9.16, which is an Extended Support
Version. To avoid unnecessary disruptions, try importing setup() from
the setuptools module and fall back to using distutils if that fails.
Add a PyLint suppression for this specific "deprecated-module" warning.
Since the setuptools module is not part of the Python Standard Library
and therefore it is not guaranteed that it is universally available in
every Python installation, update Python-related checks in configure.ac
to ensure Python module installation does not silently fail.
[1] https://peps.python.org/pep-0632/
[2] https://setuptools.pypa.io/en/latest/deprecated/distutils-legacy.html
Prime the cache with a negative cache DS entry then make a query for
name beneath that entry. This will cause the DS entry to be retieved
as part of the validation process. Each RRset in the ncache entry
will be validated and the trust level for each will be updated.
(cherry picked from commit d2d9910da2)
Add a test case for a dynamically added CDS DELETE record and make
sure it is not removed when signing the zone. This happens because
BIND maintains CDS and CDNSKEY publishing and it will only allow
CDS DELETE records if the zone is transitioning to insecure. This is
a state that can be identified when using KASP through 'dnssec-policy',
but not when using 'auto-dnssec'.
(cherry picked from commit f08277f9fb)
Commit 59d1eb3ff8 added a Python-based
name server (bin/tests/system/forward/ans11/ans.py) to the "forward"
system test, but did not update the bin/tests/system/forward/prereq.sh
script to ensure Python is present in the test environment before the
"forward" system test is run. Update bin/tests/system/forward/prereq.sh
to enforce that requirement.
- Check that an NS in an authority section returned from a forwarder
which is above the name in a configured "forward first" or "forward
only" zone (i.e., net/NS in a response from a forwarder configured for
local.net) is not cached.
- Test that a DNAME for a parent domain will not be cached when sent
in a response from a forwarder configured to answer for a child.
- Check that glue is rejected if its name falls below that of zone
configured locally.
- Check that an extra out-of-bailiwick data in the answer section is
not cached (this was already working correctly, but was not explicitly
tested before).
(cherry picked from commit bf3fffff67)
Add a test case to check for lingering TCP sockets stuck in the
CLOSE_WAIT state. This can happen if a client sends some garbage after
its first query.
The system test runs the reproducer script and then sends another TCP
query to the resolver. The resolver is configured to allow one TCP
client only. If BIND has its TCP socket stuck in CLOSE_WAIT, it does
not have the resources available to answer the second query.
Note: A better test would be to check if the named daemon does not
have a TCP socket stuck in CLOSE_WAIT for example with netstat. When
running this test locally you can examine named with netstat manually.
But since netstat is platform specific it is not a good candidate to do
this as a system test.
If you, if you could return, don't let it burn.
Do you have to let it linger?
- Cranberries
(cherry picked from commit b9ebde705b)
Enable use of shortcuts like pytest.importorskip and other tricks
which can cause test to skip itself.
(cherry picked from commit b8829c801f)
In addition to b8829c801f,
"R:$systest:SKIPPED" is not being printed when pytests are skipped
because that leads to two `R:` lines - SKIPPED and PASS/FAIL which is
determined later based on other conditions (core files identified,
assertion failures, shell test result, ...) - which is wrong and
testsummary.sh rightfully stumbles on it:
I:Found 106 test results, but 105 tests were run
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
(cherry picked from commit 7e71c4d0cc)
Previously, HAVE_SO_REUSEPORT_LB has been defined only in the private
netmgr-int.h header file, making the configuration of load balanced
sockets inoperable.
Move the missing HAVE_SO_REUSEPORT_LB define the isc/netmgr.h and add
missing isc_nm_getloadbalancesockets() implementation.
(cherry picked from commit 142c63dda8)
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
(cherry picked from commit 85c6e797aa)
The launchd script only counted up to 8 whereas ifconfig.sh went all
the way up to 10, and even a bit further than that.
(cherry picked from commit 29a3e77425)
the line "$GENERATE 19-28/2147483645 $ CNAME x" should generate
a single CNAME with the owner "19.example.com", but prior to the
overflow bug it generated several CNAMEs, half of them with large
negative values.
we now test for the bugfix by using "named-checkzone -D" and
grepping for a single CNAME in the output.
(cherry picked from commit bd814b79d4)
Ensure the update zone name is mentioned in the NOTAUTH error message
in the server log, so that it is easier to track down problematic
update clients. There are two cases: either the update zone is
unrelated to any of the server's zones (previously no zone was
mentioned); or the update zone is a subdomain of one or more of the
server's zones (previously the name of the irrelevant parent zone was
misleadingly logged).
Closes#3209
(cherry picked from commit 84c4eb02e7)
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
(cherry picked from commit 20f0936cf2)
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
(cherry picked from commit 584f0d7a7e)
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
(cherry picked from commit fe7ce629f4)
The C17 standard deprecated ATOMIC_VAR_INIT() macro (see [1]). Follow
the suite and remove the ATOMIC_VAR_INIT() usage in favor of simple
assignment of the value as this is what all supported stdatomic.h
implementations do anyway:
* MacOSX.plaform: #define ATOMIC_VAR_INIT(__v) {__v}
* Gcc stdatomic.h: #define ATOMIC_VAR_INIT(VALUE) (VALUE)
1. http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p1138r0.pdf
(cherry picked from commit f251d69eba)
The clang-format-15 has new option InsertBraces that could add missing
branches around single line statements. Use that to our advantage
without switching to not-yet-released LLVM version to add missing braces
in couple of places.
The dns.query Python module has the send_tcp() method defined in both
dnspython 1.x and 2.x, so checking for the existence of that method to
determine the dnspython version available in the test environment does
not make any sense. Fix by checking the dns.version.MAJOR integer
instead.
The ability to conveniently mark tests which should only be run when the
CI_ENABLE_ALL_TESTS environment variable is set seems to be useful on a
general level and therefore it should not be limited to the "timeouts"
system test, where it is currently used.
pytest documentation [1] suggests to reuse commonly used test markers by
putting them all in a single Python module which then has to be imported
by test files that want to use the markers defined therein. Follow that
advice by creating a new bin/tests/system/pytest_custom_markers.py
Python module containing the relevant marker definitions.
Note that "import pytest_custom_markers" works from a test-specific
subdirectory because pytest modifies sys.path so that it contains the
paths to all parent directories containing a conftest.py file (and
bin/tests/system/ is one). PyLint does not like that, though, so add a
relevant PyLint suppression.
The above changes make bin/tests/system/timeouts/conftest.py redundant,
so remove it.
[1] https://docs.pytest.org/en/7.0.x/how-to/skipping.html#id1
(cherry picked from commit 00392921f0)
Ensure all "import dns.*" statements are always placed after
pytest.importorskip('dns') calls, in order to allow the latter to
fulfill their purpose. Explicitly import all dnspython modules used by
each dnspython-based test to avoid relying on nested imports. Replace
function-scoped imports with global imports to reduce code duplication.
(cherry picked from commit 49312d6bb2)
The intended purpose of the @pytest.mark.dnspython{,2} decorators was to
cause dnspython-based tests to be skipped if dnspython is not available
(or not recent enough). However, a number of system tests employing
those decorators contain global "import dns.resolver" statements which
trigger ImportError exceptions during test initialization if dnspython
is not available. In other words, the @pytest.mark.dnspython{,2}
decorators serve no useful purpose.
Currently, whenever a Python-based test requires dnspython, that
requirement applies to all tests in a given *.py file. Given that,
employ global pytest.importorskip() calls to ensure dnspython-based
parts of various system tests are skipped when dnspython is not
available. Remove all occurrences of the @pytest.mark.dnspython{,2}
decorators (and all associated code) to prevent confusion.
(cherry picked from commit 05c97f2329)
The intended purpose of the @pytest.mark.requests decorator was to cause
Python-based parts of the "statschannel" system test to be skipped if
the requests Python module is not available. However, both
tests-json.py and tests-xml.py contain a global "import requests"
statement which triggers ImportError exceptions during test
initialization if the requests module is not available. In other words,
the @pytest.mark.requests decorator serves no useful purpose.
Since all tests in both tests-json.py and tests-xml.py depend on the
requests Python module, employ pytest.importorskip() to ensure the
Python-based parts of the "statschannel" system test are skipped when
the requests module is not available. Remove all occurrences of the
@pytest.mark.requests decorator (and all associated code) to prevent
confusion.
(cherry picked from commit 704ad2907f)
All tests in bin/tests/system/statschannel/tests-xml.py require libxml2
support to be enabled in BIND 9 at build-time. Instead of applying the
same pytest.mark.skipif() decorator to every test in that file, set the
'pytestmark' global accordingly in order to immediately skip all tests
in tests-xml.py if libxml2 support is not compiled in.
Remove all occurrences of the @pytest.mark.xml decorator (and all
associated code) from the "statschannel" system test as the
xml.etree.ElementTree module is a part of the Python standard library
since Python 2.5 (so checking whether it is available is redundant) and
checking for libxml2 support in the tested BIND 9 build is already
handled by setting the 'pytestmark' global accordingly.
(cherry picked from commit 286b57c7f1)
All tests in bin/tests/system/statschannel/tests-json.py require json-c
support to be enabled in BIND 9 at build-time. Instead of applying the
same pytest.mark.skipif() decorator to every test in that file, set the
'pytestmark' global accordingly in order to immediately skip all tests
in tests-json.py if json-c support is not compiled in.
Remove all occurrences of the @pytest.mark.json decorator (and all
associated code) from the "statschannel" system test as the json module
is a part of the Python standard library since Python 2.6 (so checking
whether it is available is redundant) and checking for json-c support in
the tested BIND 9 build is already handled by setting the 'pytestmark'
global accordingly.
Also remove a related excerpt from bin/tests/system/rpzextra/conftest.py
as it is a copy-paste artifact that serves no purpose in the "rpzextra"
system test.
(cherry picked from commit 0a76f186a5)
The "statschannel" system test contains two Python helper modules:
- generic.py: test functions directly invoked by both tests-json.py
and test-xml.py,
- helper.py: helper functions invoked by test functions in generic.py.
The above logic for splitting helper functions into Python modules
prevents selective test skipping from working due to unconditional
import statements being present in both helper modules. For example, if
dnspython is not available on the test host, tests-json.py imports
generic.py, which in turn imports helper.py, which in turn attempts to
import various dnspython modules, triggering ImportError exceptions
during test initialization. Various decorators used for some tests
(like @pytest.mark.dnspython) suggest that such a scenario should be
handled gracefully, but that is not the case - modifying the test
collection in conftest.py does not prevent pytest from failing due to
import errors.
Fix by moving helper functions around to achieve a different split:
- generic.py: helper functions only relying on the Python standard
library,
- generic_dnspython.py: helper functions requiring dnspython.
Only two tests in tests-{json,xml}.py need dnspython to work
(test_traffic_json(), test_traffic_xml()). Since all
dnspython-dependent code is now present in generic_dnspython.py, employ
pytest.importorskip() in those two tests to ensure they can be
selectively skipped when dnspython is not available. Adjust other code
to account for the revised Python helper module layout. Remove all
occurrences of the @pytest.mark.dnspython decorator (and all associated
code) from the "statschannel" system test to prevent confusion.
(cherry picked from commit 96b7f9f9aa)
Most Python-based system tests need to know which ports were assigned to
a given test by bin/tests/system/get_ports.sh. This is currently
handled by inspecting the values of various environment variables (set
by bin/tests/system/run.sh) and passing the port numbers to Python
scripts via pytest fixtures. However, this glue code has so far been
copy-pasted into each system test using it, rather than reused.
Since pytest also looks for conftest.py files in parent directories,
move commonly used fixtures to bin/tests/system/conftest.py. Set the
scope of all the moved fixtures to "session" as their return values are
only based on environment variables, so there is no point in recreating
them for every test requesting them. Adjust test code accordingly.
(cherry picked from commit 53ef8835c1)
The named-checkzone(1) and named-compilezone(1) manual pages used to
refer to the description of wildcards in RFC 1034.
(cherry picked from commit 178aef5b8c)
