The named_config_getdefault() was missing void in the function
definition. This broke clang-15 that didn't match the declaration that
had the void in the argument with the definition that hadn't.
It might be useful to display built-in configuration with all its
values. It should make it easier to test what default values has changed
in a new release.
Related: #1326
(cherry picked from commit cf722d18b3)
Parser ensures new-zones-directory has qstring parameter before it can
reach this place. dir == NULL then should never happen on any
configuration. Replace silent check with insist.
(cherry picked from commit 0a7d04367a)
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
(cherry picked from commit 7e71c4d0cc)
Previously, HAVE_SO_REUSEPORT_LB has been defined only in the private
netmgr-int.h header file, making the configuration of load balanced
sockets inoperable.
Move the missing HAVE_SO_REUSEPORT_LB define the isc/netmgr.h and add
missing isc_nm_getloadbalancesockets() implementation.
(cherry picked from commit 142c63dda8)
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
(cherry picked from commit 85c6e797aa)
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
(cherry picked from commit 20f0936cf2)
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
(cherry picked from commit 584f0d7a7e)
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
(cherry picked from commit fe7ce629f4)
Previously, the function(s) in the commit subject could fail for various
reasons - mostly allocation failures, or other functions returning
different return code than ISC_R_SUCCESS. Now, the aforementioned
function(s) cannot ever fail and they would always return ISC_R_SUCCESS.
Change the function(s) to return void and remove the extra checks in
the code that uses them.
(cherry picked from commit d128656d2e)
If a view configuration error occurs during a named reconfiguration
procedure, BIND can end up having twin views (old and new), with some
zones and internal structures attached to the old one, and others
attached to the new one, which essentially creates chaos.
Implement some additional view reverting mechanisms to avoid the
situation described above:
1. Revert rpz configuration.
2. Revert catz configuration.
3. Revert zones to view attachments.
(cherry picked from commit 3697560f04)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
(cherry picked from commit 58bd26b6cf)
If a catz event is scheduled while the task manager was being
shut down, task-exclusive mode is unavailable. This needs to be
handled as an error rather than triggering an assertion.
(cherry picked from commit 973ac1d891)
For small sized allocations, the internal allocator gets the memory in
bigger blobs that gets splits into right-sized chunks. This increases
speed of small allocations and reduced the fragmentation, but such
memory is never released back to the operating system.
Disable the internal allocator by default, and add new `-M internal`
command line option to `named`.
The following scenario triggers a "named" crash:
1. Configure a catalog zone.
2. Start "named".
3. Comment out the "catalog-zone" clause.
4. Run `rndc reconfig`.
5. Uncomment the "catalog-zone" clause.
6. Run `rndc reconfig` again.
Implement the required cleanup of the in-memory catalog zone during
the first `rndc reconfig`, so that the second `rndc reconfig` could
find it in an expected state.
(cherry picked from commit 43ac2cd229)
The lame-ttl cache is implemented in ADB as per-server locked
linked-list "indexed" with <qname,qtype>. This list has to be walked
every time there's a new query or new record added into the lame cache.
Determined attacker can use this to degrade performance of the resolver.
Resolver testing has shown that disabling the lame cache has little
impact on the resolver performance and it's a minimal viable defense
against this kind of attack.
Previously a missing/deleted zone which was referenced by a catalog
zone was causing a crash when doing a reload.
This commit will make `named` to ignore the fact that the zone is
missing, and make sure to restore it later on.
(cherry picked from commit 94a5712801)
check for type "master" / "slave" at the same time as checking
for "primary" / "secondary" as we step through the maps.
Checking "primary" then "master" or "master" then "primary" does
not work as the synomym is not checked for to stop the search.
Similarly with "secondary" and "slave".
(cherry picked from commit a3c6516a75)
The map masterfile-format is very fragile and it needs API bump every
time a RBTDB data structures changes. Also while testing it, we found
out that files larger than 2GB weren't loading and nobody noticed, and
loading many map files were also failing (subject to kernel limits).
Thus we are marking the masterfile-format type 'map' as deprecated and
to be removed in the next stable BIND 9 release.
(cherry picked from commit 6b7a488cbc)
Previously, named would run with a configuration
where *-source-v6 (notify-source-v6, transfer-source-v6 and
query-source-v6) address and port could be simultaneously used for
listening. This is no longer true for BIND 9.16+ and the code that
would do interface adjustments would unexpectedly disable listening on
TCP for such interfaces.
This commit removes the code that would adjust listening interfaces
for addresses/ports configured in *-source-v6 option.
(cherry picked from commit 8ac1d4e0da)
When BIND is running as a Windows Service the ISC library's
initializations initiated by the DLLMain loading procedure are
happening under the Windows Service Manager thread instead of
BIND's main thread.
This commit will make sure that BIND's main thread trampoline has
been initialized before running the main() function.
for all control channel commands. This should silence
gcc-10-analyzer reporting NULL pointer dereference of 'text'.
(cherry picked from commit ac0fc3c2de)
if a control channel listener was configured with more than one
key algorithm, message verification would be attempted with each
algorithm in turn. if the first key failed due to the wrong
signature length, the entire verification process was aborted,
rather than continuing on to try with another key.
(cherry picked from commit 841b557df8)
This code gathers DNSSEC keys from key files and from the DNSKEY RRset.
It is used for the 'rndc dnssec -status' command, but will also be
needed for "checkds". Turn it into a function.
(cherry picked from commit 40331a20c4)
Similar to "notify-source" and "transfer-source", add options to
set the source address when querying parental agents for DS records.
(manually picked from commit 2872d6a12e)
Introduce a way to configure parental agents that can be used to
query DS records to be used in automatic key rollovers.
(manually picked from commit 0311705d4b)
Change the primaries configuration objects to the more generic
remote-servers, that we can reuse for other purposes (such as
parental-agents).
(manually picked from commit 39a961112f)
Previously, we would set the locale on a global level and that could
possibly lead to different behaviour in underlying functions. In this
commit, we change to code to use the system locale only when calling the
libidn2 functions and reset the locale back to "POSIX" when exiting the
libidn2 code.
(cherry picked from commit 0d35b3f1a9)
The built-in "_bind" view does not allow recursion and therefore does
not need a large cache database. However, as "max-cache-size" is not
explicitly set for that view in the default configuration, it inherits
that setting from global options. Set "max-cache-size" for the built-in
"_bind" view to a fixed value (2 MB, i.e. the smallest allowed value) to
prevent needlessly preallocating memory for its cache RBT hash table.
(cherry picked from commit 86698ded32)
Currently the implicit default for the "max-cache-size" option is "90%".
As this option is inherited by all configured views, using multiple
views can lead to memory exhaustion over time due to overcommitment.
The "max-cache-size 90%;" default also causes cache RBT hash tables to
be preallocated for every configured view, which does not really make
sense for views which do not allow recursion.
To limit this problem's potential for causing operational issues, use a
minimal-sized cache for views which do not allow recursion and do not
have "max-cache-size" explicitly set (either in global configuration or
in view configuration).
For configurations which include multiple views allowing recursion,
adjusting "max-cache-size" appropriately is still left to the operator.
(cherry picked from commit 86541b39d3)
Previously, dumping the zones to the files were quantized, so it doesn't
slow down network IO processing. With the introduction of network
manager asynchronous threadpools, we can move the IO intensive work to
use that API and we don't have to quantize the work anymore as it the
file IO won't block anything except other zone dumping processes.
(cherry picked from commit 8a5c62de83)
We should also lock kasp when reading key files, because at the same
time the zone in another view may be updating the key file.
(cherry picked from commit 252a1ae0a1)
this rolls up numerous changes that have been applied to the
main branch, including moving isc_task operations into the
netmgr event loops, and other general stabilization.
When looking for key files, we could use isdigit rather than checking
if the character is within the range [0-9].
Use (unsigned char) cast to ensure the value is representable in the
unsigned char type (as suggested by the isdigit manpage).
Change " & 0xff" occurrences to the recommended (unsigned char) type
cast.
(cherry picked from commit 1998ad6c776a9c17c27788b17765dee90d9e25df)
The rndc command 'dnssec -status' only considered keys from
'dns_dnssec_findmatchingkeys' which only includes keys with accessible
private keys. Change it so that offline keys are also listed in the
status.
(cherry picked from commit b3a5859a9b)
When the feature was backported, we should have leave it disabled by
default, it turns out the default `100%` is producing some unexpected
results (under investigation), so for the time being, we are going to to
disable the max-ixfr-ratio.
Add a new built-in policy "insecure", to be used to gracefully unsign
a zone. Previously you could just remove the 'dnssec-policy'
configuration from your zone statement, or remove it.
The built-in policy "none" (or not configured) now actually means
no DNSSEC maintenance for the corresponding zone. So if you
immediately reconfigure your zone from whatever policy to "none",
your zone will temporarily be seen as bogus by validating resolvers.
This means we can remove the functions 'dns_zone_use_kasp()' and
'dns_zone_secure_to_insecure()' again. We also no longer have to
check for the existence of key state files to figure out if a zone
is transitioning to insecure.
(cherry picked from commit 2710d9a11d)
