The util/prepare-softhsm2.sh script is useful for initializing a working
SoftHSM environment which can be used by unit tests and system tests.
However, since it is a test-specific script, it does not really belong
in the util/ subdirectory which is mostly pruned during the BIND source
tarball creation process. Move the prepare-softhsm2.sh script to
bin/tests/ so that its location is more appropriate for its purpose and
also so that it does not get removed during the BIND source tarball
creation process, allowing it to be used for setting up test
environments for tarball-based builds.
(cherry picked from commit c0be772ebc)
In bin/tests/system/conf.sh.win32, the "lwresd" system test is
erroneously listed both in SEQUENTIALDIRS and PARALLELDIRS. Keep it
only in the former to prevent GitLab CI pipelines from consistently
failing on Windows due to SUBDIRS containing a different number of tests
than found in bin/tests/system/systests.output.
The autosign test has a test case where a DNSSEC maintaiend zone
has a set of DNSSEC keys without any timing metadata set. It
tests if named picks up the key for publication and signing if a
delayed dnssec-settime/loadkeys event has occured.
The test failed intermittently despite the fact it sleeps for 5
seconds but the triggered key reconfigure action should happen after
3 seconds.
However, the test output showed that the test query came in before
the key reconfigure action was complete (see excerpts below).
The loadkeys command is received:
15:38:36 received control channel command 'loadkeys delay.example.'
The reconfiguring zone keys action is triggered after 3 seconds:
15:38:39 zone delay.example/IN: reconfiguring zone keys
15:38:39 DNSKEY delay.example/NSEC3RSASHA1/7484 (ZSK) is now published
15:38:39 DNSKEY delay.example/NSEC3RSASHA1/7455 (KSK) is now published
15:38:39 writing to journal
Two seconds later the test query comes in:
15:38:41 client @0x7f1b8c0562b0 10.53.0.1#44177: query
15:38:41 client @0x7f1b8c0562b0 10.53.0.1#44177: endrequest
And 6 more seconds later the reconfigure keys action is complete:
15:38:47 zone delay.example/IN: next key event: 05-Dec-2019 15:48:39
This commit fixes the test by checking the "next key event" log has
been seen before executing the test query, making sure that the
reconfigure keys action has been complete.
This commit however does not fix, nor explain why it took such a long
time (8 seconds) to reconfigure the keys.
(cherry picked from commit 2e4273b55a)
(cherry picked from commit fb0ddd5bfe)
When libidn2 2.3.0+ is used, the "idna" system test fails as dig does
not fail as expected any more due to libidn2 2.3.0 using Unicode 11.0.0
IDNA mapping tables [1] instead of Unicode 6.3.0 ones which were used
until libidn2 2.2.0. Specifically, the SOCKS character (🧦) used in the
invalid input U-label check in the "idna" system test is a valid IDNA
character as per the IDNA mapping tables for Unicode 11.0.0. Fix the
relevant checks by using a different character (🟥) which is an invalid
IDNA character for all versions of Unicode released to date.
[1] 5eaafda64e
The LC_ALL=C assignments in the "idna" system test, which were only
meant to affect a certain subset of checks, in fact persist throughout
all the subsequent checks in that system test. That affects the test's
behavior and is misleading.
When the "VARIABLE=value command ..." syntax is used in a shell script,
in order for the variable assignment to only apply to "command", the
latter must be an external binary; otherwise, the VARIABLE=value
assignment persists for all subsequent commands in a script:
$ cat foo.sh
#!/bin/sh
foo() {
/bin/sh bar.sh
}
BAR="baz0"
BAR="baz1" /bin/sh bar.sh
echo "foo: BAR=${BAR}"
BAR="baz2" foo
echo "foo: BAR=${BAR}"
$ cat bar.sh
#!/bin/sh
echo "bar: BAR=${BAR}"
$ /bin/sh foo.sh
bar: BAR=baz1
foo: BAR=baz0
bar: BAR=baz2
foo: BAR=baz2
$
Fix by saving the value of LC_ALL before the relevant set of checks in
the "idna" system test, restoring it afterwards, and dropping the
"LC_ALL=C command ..." syntax.
(cherry picked from commit 2ee7ff23ce)
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
(cherry picked from commit d8905b7a9c)
Since the role of the bin/tests/system/clean.sh script has now been
reduced to calling a given system test's clean.sh script, remove the
former altogether and replace its only use with a direct invocation of
the latter.
(cherry picked from commit bf3eeac067)
Since files containing system test output are no longer stored in test
subdirectories, bin/tests/system/clean.sh no longer needs to take care
of removing the test.output file for a given test as testsummary.sh
already takes care of that and even if a test suite terminates
abnormally and another one is started, tee invoked without the -a
command line switch overwrites the destination file if it exists, so
leftover test.output.* files from previous test suite runs are not a
concern. Remove the -r command line switch and the code associated with
it from the relevant scripts.
(cherry picked from commit b4d37878f6)
Some clean.sh scripts contain overly broad file deletion wildcards which
cause the test.output file (used by the system test framework for
collecting output) in a given system test's directory to be erroneously
removed immediately after the test is started (due to setup.sh scripts
calling clean.sh at the beginning). This prevents the test's output
from being placed in bin/tests/system/systests.output at the end of a
test suite run and thus can lead to test failures being ignored. Fix by
storing each test's output in a test.output.<test-name> file in
bin/tests/system/, which prevents clean.sh scripts from removing it (as
they should only ever affect files contained in a given system test's
directory).
(cherry picked from commit b0916bba41)
At the end of each system test suite run, the system test framework
collects all existing test.output files from system test subdirectories
and produces bin/tests/system/systests.output from those files.
However, it does not check whether a test.output file was found for
every executed test. Thus, if the test.output file is accidentally
deleted by the system test itself (e.g. due to an overly broad file
removal wildcard present in clean.sh), its output will not be included
in bin/tests/system/systests.output. Since the result of each system
test suite run is determined by bin/tests/system/testsummary.sh, which
only operates on the contents of bin/tests/system/systests.output, this
can lead to test failures being ignored. Fix by ensuring the number of
test results found in bin/tests/system/systests.output is equal to the
number of tests run and triggering a system test suite failure in case
of a discrepancy between these two values.
(cherry picked from commit 3c3085be3c)
Ensure any unexpected failure in the "tcp" system test causes it to be
immediately interrupted with an error to make the aforementioned test
more reliable. Since the exit code for "expr 0 + 0" is 1, the status
variable needs to be updated using arithmetic expansion.
(cherry picked from commit 9841635b7f)
Ensure all checks in the "tcp" system test are numbered, so that
forensic data is preserved in case of any failure.
(cherry picked from commit 2f4877d11c)
assert_int_equal() calls in bin/tests/system/tcp/tests.sh pass the found
value as the first argument and the expected value as the second
argument, while the function interprets its arguments the other way
round. Fix argument handling in assert_int_equal() to make sure the
error messages printed by that function are correct.
(cherry picked from commit 6bd1f68bef)
In the TCP high-water checks, "rndc stats" is run after ans6 reports
that it opened the requested number of TCP connections. However, we
fail to account for the fact that ns5 might not yet have called accept()
for these connections, in which case the counts output by "rndc stats"
will be off. To prevent intermittent "tcp" system test failures, allow
the relevant connection count checks to be retried (just once, after one
second, as that should be enough for any system to accept() a dozen TCP
connections under any circumstances).
(cherry picked from commit 1e22e052d0)
Add a shell function which is used in the "tcp" system test, but has
been accidentally omitted from !2425. Make sure the function does not
change the value of "ret" itself, so that the caller can decide what to
do with the function's return value.
(cherry picked from commit 8bb7f1f2a1)
Test jitter distribution in NSEC3 dynamic zone and for a zone that has old
signatures. In both cases the generated signatures should be spread nicely.
(cherry picked from commit 540b90fd6c)
Portion of the digdelv test are skipped on IPv6 due to extra quotes
around $TESTSOCK6: "I:digdelv:IPv6 unavailable; skipping".
Researched by @michal.
Regressed with 351efd8812.
(cherry picked from commit 1b6419f8a7)
EDNS mechanisms only apply to DNS over UDP. Thus, errors encountered
while sending DNS queries over TCP must not influence EDNS timeout
statistics.
(cherry picked from commit fce3c93ea2)
If a TCP connection fails while attempting to send a query to a server,
the fetch context will be restarted without marking the target server as
a bad one. If this happens for a server which:
- was already marked with the DNS_FETCHOPT_EDNS512 flag,
- responds to EDNS queries with the UDP payload size set to 512 bytes,
- does not send response packets larger than 512 bytes,
and the response for the query being sent is larger than 512 byes, then
named will pointlessly alternate between sending UDP queries with EDNS
UDP payload size set to 512 bytes (which are responded to with truncated
answers) and TCP connections until the fetch context retry limit is
reached. Prevent such query loops by marking the server as bad for a
given fetch context if the advertised EDNS UDP payload size for that
server gets reduced to 512 bytes and it is impossible to reach it using
TCP.
(cherry picked from commit 6cd115994e)
The libidn2 library on Ubuntu Bionic is broken and idn2_to_unicode_8zlz() does't
fail when it should. This commit ensures that we don't run the system test for
valid A-label in locale that cannot display with the buggy libidn2 as it would
break the tests.
(cherry picked from commit c42e3583f9)
Make sure the CYGWIN environment variable is set whenever system tests
are run on Windows to prevent stop.pl from making incorrect assumptions
about the environment it is running in, which triggers e.g. false
reports about named instances crashing on shutdown when system tests are
run on Windows. This issue has not been caught earlier because the
CYGWIN environment variable was incidentally being set on a higher level
in our Windows test environments.
Error reporting for parallel system tests on Windows has been broken all
along: since all parallel.mk targets generated by parallel.sh pipe their
output through "tee", the return code from run.sh is lost and thus
running "make -f parallel.mk check" will not yield a non-zero return
code if some system tests fail. The same applies to runsequential.sh.
Yet, runall.sh on Windows only sets its return code to a non-zero value
if either "make -f parallel.mk check" or runsequential.sh returns a
non-zero return code. Fix by making runall.sh yield a non-zero return
code when testsummary.sh fails, which is the same approach as the one
used in the "test" target in bin/tests/system/Makefile.
(cherry picked from commit fed397c04b)
Until now, the build process for BIND on Windows involved upgrading the
solution file to the version of Visual Studio used on the build host.
Unfortunately, the executable used for that (devenv.exe) is not part of
Visual Studio Build Tools and thus there is no clean way to make that
executable part of a Windows Server container.
Luckily, the solution upgrade process boils down to just adding XML tags
to Visual Studio project files and modifying certain XML attributes - in
files which we pregenerate anyway using win32utils/Configure. Thus,
extend win32utils/Configure with three new command line parameters that
enable it to mimic what "devenv.exe bind9.sln /upgrade" does. This
makes the devenv.exe build step redundant and thus facilitates building
BIND in Windows Server containers.
(cherry picked from commit 0476e8f1ac)
