The "final reference detached" message was meant to be DEBUG(1), but was
instead kept at INFO level. Move it to the DEBUG(1) logging level, so
it's not printed under normal operations.
(cherry picked from commit 1816244725)
The various factors like NS_PER_MS are now defined in a single place
and the names are no longer inconsistent. I chose the _PER_SEC names
rather than _PER_S because it is slightly more clear in isolation;
but the smaller units are always NS, US, and MS.
(cherry picked from commit 00307fe318)
Extract the tlss values if present from the ipkeylist entry and add
the resulting tls setting to the constructed configuration for the
primary.
When comparing catalog zone entries for reuse also check the
masters.tlss values for equality.
(cherry picked from commit 65f2512315)
The aim is to do less work per byte:
* Check the bounds for each label, instead of checking the
bounds for each character.
* Instead of copying one character at a time from the wire to
the name, copy entire runs of sequential labels using memmove()
to make the most of its fast loop.
* To remember where the name ends, we only need to set the end
marker when we see a compression pointer or when we reach the
root label. There is no need to check if we jumped back and
conditionally update the counter for every character.
* To parse a compression pointer, we no longer take a diversion
around the outer loop in between reading the upper byte of the
pointer and the lower byte.
* The parser state machine is now implicit in the instruction
pointer, instead of being an explicit variable. Similarly,
when we reach the root label we break directly out of the loop
instead of setting a second state machine variable.
* DNS_NAME_DOWNCASE is never used with dns_name_fromwire() so
that option is no longer supported.
I have removed this comment which dated from January 1999 when
dns_name_fromwire() was first introduced:
/*
* Note: The following code is not optimized for speed, but
* rather for correctness. Speed will be addressed in the future.
*/
No functional change, apart from removing support for the unused
DNS_NAME_DOWNCASE option. The new code is about 2x faster than the
old code: best case 11x faster, worst case 1.4x faster.
When using dual-stack-servers the covering namespace to check whether
answers are in scope or not should be fctx->domain. To do this we need
to be able to distingish forwarding due to forwarders clauses and
dual-stack-servers. A new flag FCTX_ADDRINFO_DUALSTACK has been added
to signal this.
(cherry picked from commit dfbffd77f9)
There were a number of places where the zone table should have been
locked, but wasn't, when dns_zt_apply was called.
Added a isc_rwlocktype_t type parameter to dns_zt_apply and adjusted
all calls to using it. Removed locks in callers.
(cherry picked from commit f053d5b414)
The zone_refreshkeys() could run before the zone_shutdown(), but after
the last .erefs has been "detached" causing assertion failure when doing
dns_zone_attach(). Remove the use of .erefs (dns_zone_attach/detach)
and replace it with using the .irefs and additional checks whether the
zone is exiting in the callbacks.
(cherry picked from commit 80e66fbd2d)
There was an exception for dnssec-policy that allowed DNSSEC in the
unsigned version of the zone. This however causes a crash if the
zone switches from dynamic to inline-signing in the case of NSEC3,
because we are now trying to add an NSEC3 record to a non-NSEC3 node.
This is because BIND expects none of the records in the unsigned
version of the zone to be NSEC3.
Remove the exception for dnssec-policy when copying non DNSSEC
records, but do allow for DNSKEY as this may be a published DNSKEY
from a different provider.
(cherry picked from commit 332b98ae49)
When named starts it creates an empty KEYDATA record in the managed-keys
zone as a placeholder, then schedules a key refresh. If key refresh
fails for some reason (e.g. connectivity problems), named will load the
placeholder key into secroots as a trusted key during the next startup,
which will break the chain of trust, and named will never recover from
that state until managed-keys.bind and managed-keys.bind.jnl files are
manually deleted before (re)starting named again.
Before calling load_secroots(), check that we are not dealing with a
placeholder.
(cherry picked from commit 354ae2d7e3)
Because dns_resolver_createfetch() locks the view, it was necessary
to unlock the zone in zone_refreshkeys() before calling it in order
to maintain the lock order, and relock afterward. this permitted a race
with dns_zone_synckeyzone().
This commit moves the call to dns_resolver_createfetch() into a separate
function which is called asynchronously after the zone has been
unlocked.
The keyfetch object now attaches to the zone to ensure that
it won't be shut down before the asynchronous call completes.
This necessitated refactoring dns_zone_detach() so it always runs
unlocked. For managed zones it schedules zone_shutdown() to
run asynchronously; for unmanaged zones there is no task.
ARM states that the "eligibility" TTL is the smallest original TTL
value that is accepted for a record to be eligible for prefetching,
but the code, which implements the condition doesn't behave in that
manner for the edge case when the TTL is equal to the configured
eligibility value.
Fix the code to check that the TTL is greater than, or equal to the
configured eligibility value, instead of just greater than it.
(cherry picked from commit 863f51466e)
For UDP queries, after calling dns_adb_beginudpfetch() in fctx_query(),
make sure that dns_adb_endudpfetch() is also called on error path, in
order to adjust the quota back.
(cherry picked from commit 5da79e2be0)
It is currently possible that dns_adb_endudpfetch() is not
called in fctx_cancelquery() for a UDP query, which results
in quotas not being adjusted back.
Always call dns_adb_endudpfetch() for UDP queries.
(cherry picked from commit e4569373ca)
In the cleanup code of fctx_query() function there is a code path
where 'query' is linked to 'fctx' and it is being destroyed.
Make sure that 'query' is unlinked before destroying it.
(cherry picked from commit ac889684c7)
This log happens when BIND checks the parental-agents if the DS has
been published. But if you don't have parental-agents set up, the list
of keys to check will be empty and the result will be ISC_R_NOTFOUND.
This is not an error, so change the log level to debug in this case.
(cherry picked from commit a1d57fc8cb)
Mostly generated automatically with the following semantic patch,
except where coccinelle was confused by #ifdef in lib/isc/net.c
@@ expression list args; @@
- UNEXPECTED_ERROR(__FILE__, __LINE__, args)
+ UNEXPECTED_ERROR(args)
@@ expression list args; @@
- FATAL_ERROR(__FILE__, __LINE__, args)
+ FATAL_ERROR(args)
(cherry picked from commit ec50c58f52)
dohpath is specfied in draft-ietf-add-svcb-dns and has a value
of 7. It must be a relative path (start with a /), be encoded
as UTF8 and contain the variable dns ({?dns}).
(cherry picked from commit 6d561d3886)
The HMACs and GSSAPI are just using unallocated values.
Moving them around shouldn't cause issues.
Only the dnssec system test knew the internal number in use for hmacmd5.
(cherry picked from commit 09f7e0607a)
When looking for changes in a catalog zone member zone we need to
also check if the TSIG key name associated with a primary server
has be added, removed or changed.
(cherry picked from commit 9172bd9b5a)
When fuzzing it is useful for all signing operations to happen
at a specific time for reproducability. Add two variables to
the message structure (fuzzing and fuzztime) to specify if a
fixed time should be used and the value of that time.
(cherry picked from commit 3e85d8c3d6)
dns_rdata_tostruct doesn't need a mctx passed to it for SIG (the signer
is already expanded at this point). About the only time when mctx is
needed is when the structure is to be used after the rdata has been
destroyed.
(cherry picked from commit d6ad56bd9e)
Impact should be visible only in tests or tools because named never
uses view == NULL, which is a necessary condition to trigger this leak.
(cherry picked from commit 69256b3553)
OpenSSL just cannot work with mixing ENGINE_* api mixed with OSSL_PARAM
builders. But it can be built in legacy mode, where deprecated but still
working API would be used.
It can work under OpenSSL 3.0, but only if using legacy code paths
matching OpenSSL 1.1 calls and functions.
Remove fromlabel processing by OpenSSL 3.0 only functions. They can
return later with a proper provider support for pkcs11.
(cherry picked from commit 6c55ea17c6)
OpenSSL has deprecated many things in version 3.0. If pkcs11 engine
should work then no builder from OpenSSL 3.0 API can be used.
Allow switching to OpenSSL 1.1 like calls even on OpenSSL 3.0 when
OPENSSL_API_COMPAT=10100 is defined. It would still compile and allow
working keys loading from the engine passed on command line.
(cherry picked from commit f92950bb64)
According to manual page of ENGINE_init, it should be called explicitly
before any key operations happens. Make it active whole lifetime.
(cherry picked from commit 71a8f1e7cd)
dns_request_create() was a front-end to dns_request_createvia() that
was only used by test binaries. dns_request_createvia() has been
renamed to dns_request_create(), and the test programs that formerly
used dns_request_create() have been updated to use the new parameters.
(cherry picked from commit ebf7b31aa3)
When used with OpenSSL v3.0.0+, the `openssldh_compare()`,
`openssldh_paramcompare()`, and `openssldh_todns()` functions
fail to cleanup the used memory on some error paths.
Use `DST_RET` instead of `return`, when there is memory to be
released before returning from the functions.
(cherry picked from commit 73d6bbff4e)
Limit the amount of database lookups that can be triggered in
fctx_getaddresses() (i.e. when determining the name server addresses to
query next) by setting a hard limit on the number of NS RRs processed
for any delegation encountered. Without any limit in place, named can
be forced to perform large amounts of database lookups per each query
received, which severely impacts resolver performance.
The limit used (20) is an arbitrary value that is considered to be big
enough for any sane DNS delegation.
(cherry picked from commit 3a44097fd6)
It is possible to bypass Response Rate Limiting (RRL)
`responses-per-second` limitation using specially crafted wildcard
names, because the current implementation, when encountering a found
DNS name generated from a wildcard record, just strips the leftmost
label of the name before making a key for the bucket.
While that technique helps with limiting random requests like
<random>.example.com (because all those requests will be accounted
as belonging to a bucket constructed from "example.com" name), it does
not help with random names like subdomain.<random>.example.com.
The best solution would have been to strip not just the leftmost
label, but as many labels as necessary until reaching the suffix part
of the wildcard record from which the found name is generated, however,
we do not have that information readily available in the context of RRL
processing code.
Fix the issue by interpreting all valid wildcard domain names as
the zone's origin name concatenated to the "*" name, so they all will
be put into the same bucket.
(cherry picked from commit baa9698c9d)
The dnstap query_message field was in some cases being filled in
with response messages, along with the response_message field.
The query_message field should only be used when logging requests,
and the response_message field only when logging responses.
(cherry picked from commit 3ccfff8ab6)
There is one case in 'dns_nsec3_activex()' where it returns but forgets
to detach the db node. Add the missing 'dns_db_detachnode()' call.
This case only triggers if 'sig-signing-type' (privatetype) is set to 0
(which by default is not), or if the function is called with 'complete'
is set to 'true' (which at this moment do not exist).
(cherry picked from commit 0cf6c18ccb2205a1fc81431f908c8310f6136bbb)
When doing a dnssec-policy reconfiguration from a zone with NSEC only
keys to a zone that uses NSEC3, figure out to wait with building the
NSEC3 chain.
Previously, BIND 9 would attempt to sign such a zone, but failed to
do so because the NSEC3 chain conflicted with existing DNSKEY records
in the zone that were not compatible with NSEC3.
There exists logic for detecting such a case in the functions
dnskey_sane() (in lib/dns/zone.c) and check_dnssec() (in
lib/ns/update.c). Both functions look very similar so refactor them
to use the same code and call the new function (called
dns_zone_check_dnskey_nsec3()).
Also update the dns_nsec_nseconly() function to take an additional
parameter 'diff' that, if provided, will be checked whether an
offending NSEC only DNSKEY will be deleted from the zone. If so,
this key will not be considered when checking the zone for NSEC only
DNSKEYs. This is needed to allow a transition from an NSEC zone with
NSEC only DNSKEYs to an NSEC3 zone.
(cherry picked from commit 09a81dc84ce0fee37442f03cdbd63c2398215376)
When dumping an ADB address entry associated with a name,
the name bucket lock was held, but the entry bucket lock was
not; this could cause data races when other threads were updating
address entry info. (These races are probably not operationally
harmful, but they triggered TSAN error reports.)
When initially hitting the `fetches-per-zone` value, a log message
is being generated for the event of dropping the first fetch, then
any further log events occur only when another fetch is being dropped
and 60 seconds have been passed since the last logged message.
That logic isn't ideal because when the counter of the outstanding
fetches reaches zero, the structure holding the counters' values will
get deleted, and the information about the dropped fetches accumulated
during the last minute will not be logged.
Improve the fcount_logspill() function to makie sure that the final
values are getting logged before the counter object gets destroyed.
(cherry picked from commit 039871ceb7)
Fedora 33 doesn't support RSASHA1 in future mode. There is no easy
check for this other than by attempting to perform a verification
using known good signatures. We don't attempt to sign with RSASHA1
as that would not work in FIPS mode. RSASHA1 is verify only.
The test vectors were generated using OpenSSL 3.0 and
util/gen-rsa-sha-vectors.c. Rerunning will generate a new set of
test vectors as the private key is not preserved.
e.g.
cc util/gen-rsa-sha-vectors.c -I /opt/local/include \
-L /opt/local/lib -lcrypto
(cherry picked from commit cd3f00874f)
The command 'rndc dumpdb -expired' will include expired RRsets in the
output, but only for the RBTDB_VIRTUAL time (of 5 minutes). This means
that if there is a cache cleaning problem and contents are not cleaned
up, the rndc command has little diagnostic value. Fix this by including
all RRsets in the dumpdb output if the '-expired' flag is set.
(cherry picked from commit 930ba2c914)
The BUFSIZ value varies between platforms, it could be 8K on Linux and
512 bytes on mingw. Make sure the buffers are always big enough for the
output data to prevent truncation of the output by appropriately
enlarging or sizing the buffers.
(cherry picked from commit b19d932262)
When a thread calls dns_dispatch_connect() on an unconnected TCP socket
it sets `tcpstate` from `DNS_DISPATCHSTATE_NONE` to `_CONNECTING`.
Previously, it then INSISTed that there were no pending connections
before calling isc_nm_tcpdnsconnect().
If a second thread called dns_dispatch_connect() during that window
of time, it could add a pending connection to the list, and trigger
an assertion failure.
This commit removes the INSIST since the condition is actually
harmless.
(cherry picked from commit 25ddec8a0a)
Ondřej Surý
Michal Nowak
Tony FinchandTony Finch
Mark Andrews
Matthijs Mekking
Aram Sargsyan
Evan Hunt
Petr MenšíkandMark Andrews
Michał Kępień