The terminating conditions for the startup notify test would
occasionally get ~20 records or get +10 seconds of records due to
a bad terminating condition. Additionally 20 samples lead to test
failures. Fix the terminating condition to use the correct conditional
(-eq -> -ge) and increase the minimum number of log entries to
average over to 22.
(cherry picked from commit 46388d07a2)
After the rndc reload command finished, we might have queried the
database zone sooner than it was reloaded because rndc reloads zones
asynchronously if no specific zone was provided. We should wait for "all
zones loaded" in the ns1 log to be sure.
(cherry picked from commit 0bdd03db66)
This adds a new test directory specifically for CAMP attacks. This first
test in this test directory follows multiple CNAME chains, restarting
the max-recursion-queries counter, but should bail when the global
maximum quota max-query-count is reached.
(cherry picked from commit 73eafaba14)
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
(cherry picked from commit bbc16cc8e6)
The ns2/managed1.conf file is created by the setup.sh script. Then, in
the tests.sh script it is moved to ns2/managed.conf. The latter file
name is in mkeys extra_artifacts, but the former one is not. This is a
problem when pytest is started with the --setup-only option as it only
runs the setup.sh script (e.g., in the cross-version-config-tests CI
job) and thus failing the "Unexpected files found" assertion.
(cherry picked from commit e7d973bd00)
The nslookup system test checks the count of resolved addresses in
the CNAME tests using a 'grep' match on the hostname, and ignoring
lines containing the 'canonical name' string. In order to protect
the check from intermittent failures like the 'address in use' warning
message, which then automatically resolves after a retry, edit the
'grep' matching string to also ignore the comments (as the mentioned
warning message is a comment which contains the hostname).
(cherry picked from commit 345b0f9e5c)
Ensure that the jinja2 templates have all the environment variables
which are available to the tests present.
This omission during the original 9.18 backport caused an issue where
port numbers (determined by the pytest framework) wouldn't be available
in jinja2 templates.
On some slow systems, the test might intermittently fail due to inherent
timing issues. In our CI, this most often happens in the
system:gcc:8fips:amd64 jobs.
(cherry picked from commit a299650a6f)
When a test is re-run by the flaky plugin, the TestReport outcomes
collected in the pytest_runtest_makereport() hook should be overriden.
Each of the setup/call/teardown phases is reported again and since we
care about the overall outcome, their respective results should be
overriden so that only the outcome from the final test (re)run gets
reported.
Prior to this change, it lead to a situation where an extra_artifact
generated during the test might be ignored. This was caused because the
check was skipped, since the test was incorrectly considered as "failed"
in the case where the test would fail on the first run, but pass on a
subsequent flaky rerun.
(cherry picked from commit b66fb31dcb)
The artifact lists in clean.sh and extra_artifacts might be slightly
different. The list was updated for each test to reflect the current
state.
(cherry picked from commit 7c259fe254)
Prior to introducing the pytest runner, clean.sh files were used as a
list of files that the test is expected to leave around as artifacts and
check that no extra files were created.
With the pytest runner, those scripts are no longer used, but the
ability to detect extraneous files is still useful. Add a new
"extra_artifacts" mark which can be used for the same purpose.
(cherry picked from commit 3a9f4edddc)
Configuration files in system tests which require some variables (e.g.
port numbers) filled in during test setup, can now use jinja2 templates
when `jinja2` python package is available.
Any `*.j2` file found within the system test directory will be
automatically rendered with the environment variables into a file
without the `.j2` extension by the pytest runner. E.g.
`ns1/named.conf.j2` will become `ns1/named.conf` during test setup. To
avoid automatic rendering, use `.j2.manual` extension and render the
files manually at test time.
New `templates` pytest fixture has been added. Its `render()` function
can be used to render a template with custom test variables. This can be
useful to fill in different config options during the test. With
advanced jinja2 template syntax, it can also be used to include/omit
entire sections of the config file rather than using `named1.conf.in`,
`named2.conf.in` etc.
(cherry picked from commit 60e118c4fb)
The pytest collection mechanism has been overhauled in pytest 8.0.0,
resulting in a different node tree when collecting the tests. Ensure the
paths / names we're using that are derived from the node tree are
consistent across different pytest versions.
Particularly, this has affected the convenience symlink name (which is
supposed to be in the form of e.g. dns64_sh_dns64 for the dns64 module
and tests_sh_dns64.py module) and the test name that's logged at the
start of the test, which is supposed to include the system test
directory relative to the root system test directory as well as the
module name (e.g. dns64/tests_sh_dns64.py).
Related https://github.com/pytest-dev/pytest/issues/7777
(cherry picked from commit 7118cbed98)
For dynamic zones that do not set inline-signing explicitly, add a
warning that the default value for inline-signing has changed. Dynamic
zones that want to be able to reuse the zone (and not trigger a full
resign) should explicitly configure "inline-signing no;".
Enforcing pylint standards and default for our test code seems
counter-productive. Since most of the newly added code are tests or is
test-related, encountering these checks rarely make us refactor the code
in other ways and we just disable these checks individually. Code that
is too complex or convoluted will be pointed out in reviews anyways.
(cherry picked from commit 7639c58c48)
CookieOption with new .server/.client attributes (rather than .data) was
added to dnspython. Adjust the code to use the new attributes if
available and fall back to the old code for dnspython<2.7.0
compatibility.
(cherry picked from commit 0d90b13646)
In a multi-signer setup, removing DNSKEY records from the zone should
not be treated as a key that previously exists in the keyring, thus
blocking the keymgr. Add a test case to make sure.
(cherry picked from commit 5f552293d7)
Test that if a key to be purged is in the keyring, it does not
prevent the keymgr from running. Normally a key that is in the keyring
should be available again on the next run, but that is not true for
a key that can be purged.
In addition, fix some wait_for_log calls, by adding the missing
'|| ret=1' parts.
(cherry picked from commit a2317425bc)
Some test cases were working but for the wrong reasons. These started
to fail when I implemented the first approach for #4763, where the
existence of a DNSKEY together with an empty keyring is suspicious and
would prevent the keymgr from running.
These are:
1. kasp: The multisigner-model2.kasp zone has ZSKs from other providers
in the zone, but not yet its own keys. Pregenerate signing keys and
add them to the unsigned zone as well.
2. kasp: The dynamic-signed-inline-signing.kasp zone has a key generated
and added in the raw version of the zone. But the key file is stored
outside the key-directory for the given zone. Add '-K keys' to the
dnssec-keygen command.
(cherry picked from commit d1e263ef13)
Prior to running the keymgr, first make sure that existing keys
are present in the new keylist. If not, treat this as an operational
error where the keys are made offline (temporarily), possibly unwanted.
(cherry picked from commit 5fdad05a8a)
In this specific case the key files are temporary unavailable, for
example because of an operator error, or a mount failure). In such
cases, BIND should not try to roll over these keys.
(cherry picked from commit a3afbd9d6f)
The ans4 server wasn't shutting down cleanly sometimes. Check that
read returns the expected value for the message length or exit read
loop.
(cherry picked from commit 21baad0a8f)
The shutdown system test sends queries when named is shutting down, not
in an attempt to get answers but to destabilize the server into a crash.
With isctest.query.udp() defaulting to try up to ten times with a
ten-second timeout to get a response we don't care about from a likely
terminated server, we make the test run much longer than needed because
of retries and long timeouts.
(cherry picked from commit 463ab2f3f5)
The 'bin/tests/system/resolver.c' tool used in the resolver system
test uses the 'dns_client_setservers()' function, which sets up a
resolution in 'forward only' mode. Since a bug was just fixed in
'fctx_getaddresses()', two expected failures in the resolver system
test now fail with a different failure message, because
'fctx_getaddresses()' returns 'ISC_R_FAILURE' instead of
'res->quotaresp[dns_quotatype_server]', which is 'DNS_R_SERVFAIL'
by default. Change the expected failure message.
Check that the fix in the previous commit works and that the
'ServerQuota' counter in the statistics channel is still unset
after a SERVFAIL result in a 'forward only' zone.
(cherry picked from commit 81b3c5d908)
