In order to lower the amount of memory allocated at startup by named
instances used in the BIND system test suite, set the default value of
"max-cache-size" for these to 2 megabytes. The purpose of this change
is to prevent named instances (or even entire virtual machines) from
getting killed by the operating system on the test host due to excessive
memory use.
Remove all "max-cache-size" statements from named configuration files
used in system tests ("checkconf" notwithstanding) to prevent confusion
as the "-T maxcachesize=..." command line option takes precedence over
configuration files.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
With the netmgr in use, named may start answering queries before zones
are loaded. This can cause transient failures in system tests after
servers are restarted or reconfigured. This commit adds retry loops
and sleep statements where needed to address this problem.
Also incidentally silenced a clang warning.
- ns__client_request() is now called by netmgr with an isc_nmhandle_t
parameter. The handle can then be permanently associated with an
ns_client object.
- The task manager is paused so that isc_task events that may be
triggred during client processing will not fire until after the netmgr is
finished with it. Before any asynchronous event, the client MUST
call isc_nmhandle_ref(client->handle), to prevent the client from
being reset and reused while waiting for an event to process. When
the asynchronous event is complete, isc_nmhandle_unref(client->handle)
must be called to ensure the handle can be reused later.
- reference counting of client objects is now handled in the nmhandle
object. when the handle references drop to zero, the client's "reset"
callback is used to free temporary resources and reiniialize it,
whereupon the handle (and associated client) is placed in the
"inactive handles" queue. when the sysstem is shutdown and the
handles are cleaned up, the client's "put" callback is called to free
all remaining resources.
- because client allocation is no longer handled in the same way,
the '-T clienttest' option has now been removed and is no longer
used by any system tests.
- the unit tests require wrapping the isc_nmhandle_unref() function;
when LD_WRAP is supported, that is used. otherwise we link a
libwrap.so interposer library and use that.
One second may not be enough for an NSEC3 chain change triggered by an
UPDATE message to complete. Wait up to 10 seconds when checking whether
a given NSEC3 chain change is complete in the "nsupdate" system test.
In the "nsupdate" system test, do not sleep before checking results of
changes which are expected to be processed synchronously, i.e. before
nsupdate returns.
Temporary files created by a given system test should be removed by its
clean.sh script, not its setup.sh script. Remove redundant "rm"
invocations from setup.sh scripts. Move required "rm" invocations from
setup.sh scripts to their corresponding clean.sh scripts.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
- removed a few remaing places where output wasn't being passed
through echo_i or cat_i
- added a "digcomp" function to conf.sh.in to send digcomp.pl output
through cat_i and return the correct exit value
- set SYSTESTDIR when calling echo_i from nsX directories, so that
the test name will always be printed correctly
- fixed a test name typo in conf.sh.in
The check_mx() function in lib/ns/update.c incorrectly tests whether the
DNS_RDATA_CHECKMX/DNS_RDATA_CHECKMXFAIL flags are set for each applied
MX record update as these flags are never set in code paths related to
dynamic updates; they can only be set when loading a zone from a master
file (DNS_ZONEOPT_CHECKMX -> DNS_MASTER_CHECKMX -> DNS_RDATA_CHECKMX).
This flaw allows MX records containing IP addresses to be added to a
zone even when "check-mx fail;" is used.
Ensure correct behavior by modifying the relevant tests in check_mx() so
that they use DNS_ZONEOPT_CHECKMX/DNS_ZONEOPT_CHECKMXFAIL instead.
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
4788. [cleanup] When using "update-policy local", log a warning
when an update matching the session key is received
from a remote host. [RT #46213]
- this completes change #4762.
4762. [func] "update-policy local" is now restricted to updates
from local addresses. (Previously, other addresses
were allowed so long as updates were signed by the
local session key.) [RT #45492]
4708. [cleanup] Legacy Windows builds (i.e. for XP and earlier)
are no longer supported. [RT #45186]
4707. [func] The lightweight resolver daemon and library (lwresd
and liblwres) have been removed. [RT #45186]
4706. [func] Code implementing name server query processing has
been moved from bin/named to a new library "libns".
Functions remaining in bin/named are now prefixed
with "named_" rather than "ns_". This will make it
easier to write unit tests for name server code, or
link name server functionality into new tools.
[RT #45186]
