This commit makes number of concurrent HTTP/2 streams per connection
configurable as a mean to fight DDoS attacks. As soon as the limit is
reached, BIND terminates the whole session.
The commit adds a global configuration
option (http-streams-per-connection) which can be overridden in an
http <name> {...} statement like follows:
http local-http-server {
...
streams-per-connection 100;
...
};
For now the default value is 100, which should be enough (e.g. NGINX
uses 128, but it is a full-featured WEB-server). When using lower
numbers (e.g. ~70), it is possible to hit the limit with
e.g. flamethrower.
This commit adds support for http-listener-clients global options as
well as ability to override the default in an HTTP server description,
like:
http local-http-server {
...
listener-clients 100;
...
};
This way we have ability to specify per-listener active connections
quota globally and then override it when required. This is exactly
what AT&T requested us: they wanted a functionality to specify quota
globally and then override it for specific IPs. This change
functionality makes such a configuration possible.
It makes sense: for example, one could have different quotas for
internal and external clients. Or, for example, one could use BIND's
internal ability to serve encrypted DoH with some sane quota value for
internal clients, while having un-encrypted DoH listener without quota
to put BIND behind a load balancer doing TLS offloading for external
clients.
Moreover, the code no more shares the quota with TCP, which makes
little sense anyway (see tcp-clients option), because of the nature of
interaction of DoH clients: they tend to keep idle opened connections
for longer periods of time, preventing the TCP and TLS client from
being served. Thus, the need to have a separate, generally larger,
quota for them.
Also, the change makes any option within "http <name> { ... };"
statement optional, making it easier to override only required default
options.
By default, the DoH connections are limited to 300 per listener. I
hope that it is a good initial guesstimate.
This commit adds the code (and some tests) which allows verifying
validity of HTTP paths both in incoming HTTP requests and in BIND's
configuration file.
This commit adds two new autoconf options `--enable-doh` (enabled by
default) and `--with-libnghttp2` (mandatory when DoH is enabled).
When DoH support is disabled the library is not linked-in and support
for http(s) protocol is disabled in the netmgr, named and dig.
Add checks for "parental-agents" configuration, checking for the option
being at wrong type of zone (only allowed for primaries and
secondaries), duplicate definitions, duplicate references, and
undefined parental clauses (the name referenced in the zone clause
does not have a matching "parental-agent" clause).
Add three more test cases that detect a configuration error if the
key-directory is inherited but has the same value for a zone in a
different view with a deviating DNSSEC policy.
Add two tests to make sure named-checkconf catches key-directory issues
where a zone in multiple views uses the same directory but has
different dnssec-policies. One test sets the key-directory specifically,
the other inherits the default key-directory (NULL, aka the working
directory).
Also update the good.conf test to allow zones in different views
with the same key-directory if they use the same dnssec-policy.
Also allow zones in different views with different key-directories if
they use different dnssec-policies.
Also allow zones in different views with the same key-directories if
only one view uses a dnssec-policy (the other is set to "none").
Also allow zones in different views with the same key-directories if
no views uses a dnssec-policy (zone in both views has the dnssec-policy
set to "none").
Just like with dynamic and/or inline-signing zones, check if no two
or more zone configurations set the same filename. In these cases,
the zone files are not read-only and named-checkconf should catch
a configuration where multiple zone statements write to the same file.
Add some bad configuration tests where KASP zones reference the same
zone file.
Update the good-kasp test to allow for two zones configure the same
file name, dnssec-policy none.
When reducing the number of NSEC3 iterations to 150, commit
aa26cde2ae added tests for dnssec-policy
to check that a too high iteration count is a configuration failure.
The test is not sufficient because 151 was always too high for
ECDSAP256SHA256. The test should check for a different algorithm.
There was an existing test case that checks for NSEC3 iterations.
Update the test with the new maximum values.
Update the code in 'kaspconf.c' to allow at most 150 iterations.
Add a new option 'purge-keys' to 'dnssec-policy' that will purge key
files for deleted keys. The option determines how long key files
should be retained prior to removing the corresponding files from
disk.
If set to 0, the option is disabled and 'named' will not remove key
files from disk.
updated the parser to allow the "port", "tls" and "http"
paramters to "listen-on" and "listen-on-v6" to be specified in any
order. previously the parser would throw an error if any other order
was used than port, tls, http.
unencrypted DoH connections may be used in some operational
environments where encryption is handled by a reverse proxy,
but it's going to be relatively rare, so we shouldn't make it
easy to do by mistake. this commit changes the syntax for
listen-on and listen-on-v6 so that if "http" is specified, "tls"
must also be specified; for unencrypted listeners, "tls none"
can be used.
This commit adds stub parser support and tests for:
- an "http" global option for HTTP/2 endpoint configuration.
- command line options to set http or https port numbers by
specifying -p http=PORT or -p https=PORT. (NOTE: this change
only affects syntax; specifying HTTP and HTTPS ports on the
command line currently has no effect.)
- named.conf options "http-port" and "https-port"
- HTTPSPORT environment variable for use when running tests.
When compiling BIND 9 without lmdb, this is promoted from
'not operational' to 'not configured', resulting in a failure (and no
longer a warning) if ldmb-related configuration options are set.
Special case certain system tests to avoid test failures on systems
that do not have lmdb.
These options were ancient or made obsolete a long time ago, it is
safe to remove them.
Also stop printing ancient options, they should be treated the same as
unknown options.
Removed options: lwres, geoip-use-ecs, sit-secret, use-ixfr,
acache-cleaning-interval, acache-enable, additional-from-auth,
additional-from-cache, allow-v6-synthesis, dnssec-enable,
max-acache-size, nosit-udp-size, queryport-pool-ports,
queryport-pool-updateinterval, request-sit, use-queryport-pool, and
support-ixfr.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
Check 'nsec3param' configuration for the number of iterations. The
maximum number of iterations that are allowed are based on the key
size (see https://tools.ietf.org/html/rfc5155#section-10.3).
Check 'nsec3param' configuration for correct salt. If the string is
not "-" or hex-based, this is a bad salt.
RFC 8767 recommends that attempts to refresh to be done no more
frequently than every 30 seconds.
Added check into named-checkconf, which will warn if values below the
default are found in configuration.
BIND will also log the warning during loading of configuration in the
same fashion.
Make sure "order none" RRset ordering rules are tested in the
"rrsetorder" system test just like all other rule types are. As the
check for the case of no "rrset-order" rule matching a given RRset also
tests "order none" (rather than "order random", as the test code may
suggest at first glance), replace the test code for that case so that it
matches other "order none" tests.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
these keywords were added to the parser as synonyms for "master"
and "slave" but were never hooked in to the configuration of named,
so they were ignored. this has been fixed and the option is now
checked for correctness.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
When dnssec-policy was introduced, it implicitly set inline-signing.
But DNSSEC maintenance required either inline-signing to be enabled,
or a dynamic zone. In other words, not in all cases you want to
DNSSEC maintain your zone with inline-signing.
Change the behavior and determine whether inline-signing is
required: if the zone is dynamic, don't use inline-signing,
otherwise implicitly set it.
You can also explicitly set inline-signing to yes with dnssec-policy,
the restriction that both inline-signing and dnssec-policy cannot
be set at the same time is now lifted.
However, 'inline-signing no;' on a non-dynamic zone with a
dnssec-policy is not possible.
The key-directory keyword actually does nothing right now but may
be useful in the future if we want to differentiate between key
directories or HSM keys, or if we want to speficy different
directories for different keys or policies. Make it optional for
the time being.
The keyword 'unlimited' can be used instead of PT0S which means the
same but is more comprehensible for users.
Also fix some redundant "none" parameters in the kasp test.
