as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
(cherry picked from commit 16e14353b1)
Configure "none" as a builtin policy. Change the 'cfg_kasp_fromconfig'
api so that the 'name' will determine what policy needs to be
configured.
When transitioning a zone from secure to insecure, there will be
cases when a zone with no DNSSEC policy (dnssec-policy none) should
be using KASP. When there are key state files available, this is an
indication that the zone once was DNSSEC signed but is reconfigured
to become insecure.
If we would not run the keymgr, named would abruptly remove the
DNSSEC records from the zone, making the zone bogus. Therefore,
change the code such that a zone will use kasp if there is a valid
dnssec-policy configured, or if there are state files available.
(cherry picked from commit cf420b2af0)
This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
(cherry picked from commit 6f97bb6b1f)
NSEC3 is not backwards compatible with key algorithms that existed
before the RFC 5155 specification was published.
(cherry picked from commit 00c5dabea3)
Check 'nsec3param' configuration for the number of iterations. The
maximum number of iterations that are allowed are based on the key
size (see https://tools.ietf.org/html/rfc5155#section-10.3).
Check 'nsec3param' configuration for correct salt. If the string is
not "-" or hex-based, this is a bad salt.
(cherry picked from commit 7039c5f805)
Implement support for NSEC3 in dnssec-policy. Store the configuration
in kasp objects. When configuring a zone, call 'dns_zone_setnsec3param'
to queue an nsec3param event. This will ensure that any previous
chains will be removed and a chain according to the dnssec-policy is
created.
Add tests for dnssec-policy zones that uses the new 'nsec3param'
option, as well as changing to new values, changing to NSEC, and
changing from NSEC.
(cherry picked from commit 114af58ee2)
Before this update, BIND would attempt to do a full recursive resolution
process for each query received if the requested rrset had its ttl
expired. If the resolution fails for any reason, only then BIND would
check for stale rrset in cache (if 'stale-cache-enable' and
'stale-answer-enable' is on).
The problem with this approach is that if an authoritative server is
unreachable or is failing to respond, it is very unlikely that the
problem will be fixed in the next seconds.
A better approach to improve performance in those cases, is to mark the
moment in which a resolution failed, and if new queries arrive for that
same rrset, try to respond directly from the stale cache, and do that
for a window of time configured via 'stale-refresh-time'.
Only when this interval expires we then try to do a normal refresh of
the rrset.
The logic behind this commit is as following:
- In query.c / query_gotanswer(), if the test of 'result' variable falls
to the default case, an error is assumed to have happened, and a call
to 'query_usestale()' is made to check if serving of stale rrset is
enabled in configuration.
- If serving of stale answers is enabled, a flag will be turned on in
the query context to look for stale records:
query.c:6839
qctx->client->query.dboptions |= DNS_DBFIND_STALEOK;
- A call to query_lookup() will be made again, inside it a call to
'dns_db_findext()' is made, which in turn will invoke rbdb.c /
cache_find().
- In rbtdb.c / cache_find() the important bits of this change is the
call to 'check_stale_header()', which is a function that yields true
if we should skip the stale entry, or false if we should consider it.
- In check_stale_header() we now check if the DNS_DBFIND_STALEOK option
is set, if that is the case we know that this new search for stale
records was made due to a failure in a normal resolution, so we keep
track of the time in which the failured occured in rbtdb.c:4559:
header->last_refresh_fail_ts = search->now;
- In check_stale_header(), if DNS_DBFIND_STALEOK is not set, then we
know this is a normal lookup, if the record is stale and the query
time is between last failure time + stale-refresh-time window, then
we return false so cache_find() knows it can consider this stale
rrset entry to return as a response.
The last additions are two new methods to the database interface:
- setservestale_refresh
- getservestale_refresh
Those were added so rbtdb can be aware of the value set in configuration
option, since in that level we have no access to the view object.
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
(cherry picked from commit ce53db34d6)
Originally, every library and binaries got linked to everything, which
creates unnecessary overlinking. This wasn't as straightforward as it
should be as we still support configuration without libtool for 9.16.
Couple of smaller issues related to include headers and an issue where
sanitizer overload dlopen and dlclose symbols, so we were getting false
negatives in the autoconf test.
nzf_append is conditionally compiled and this is intended to
catch error introduced by changes to the called functions on all
systems before the changes are run through the CI.
(cherry picked from commit a66c6fc883)
When we were printing quoted string, the double quotes where unescaped
leading to prematurely ending the quoted string.
(cherry picked from commit b02081d423)
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
(cherry picked from commit b6c2012d93)
There was a missing indirection for the pluginlist_cb_t *callback in the
declaration of the cfg_pluginlist_foreach function. Reported by MSVC as:
lib\isccfg\parser.c(4057): warning C4028: formal parameter 4 different from declaration
(cherry picked from commit 4ffe725585)
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
(cherry picked from commit 789d253e3d)
Updated version and CHANGES files with new release number.
Check the API files:
- lib/bind9/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/dns/api:
Function dns_acl_match changed, struct dns_badcache changed,
function dns_badcache_add changed, function dns_clent_startupdate
changed, struct dns_compress changed, struct dns_resolver changed,
rwlock size changed. This means a LIBINTERFACE increment.
- lib/irs/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/isc/api:
The structs isc__networker and isc_nmsocket changed. This means
increment LIBINTERFACE. The functions isc_uv_export and
isc_uv_import are removed, so LIBAGE must beq zero.
- lib/isccc/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/isccfg/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/ns/api:
Function ns_clientmgr_create, ns_interfacemgr_create, and
structs ns_clientmgr, ns_interface, ns_interfacemgr changed:
increment LIBINTERFACE.
No need to update README or release notes.
Updated CHANGES: Add GitLab MR reference to entry 5357. Remove
merge conflict gone wrong ("max-ixfr-ratio" is not in 9.16).
Add /util/check-make-install.in to .gitattributes.
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
(cherry picked from commit 0b793166d0)
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
(cherry picked from commit fc967ba092)
this corrects some style glitches such as:
```
long_function_call(arg, arg2, arg3, arg4, arg5, "str"
"ing");
```
...by adjusting the penalties for breaking strings and call
parameter lists.
(cherry picked from commit 0002377dca)
Start enforcing the clang-format rules on changed files
Closes#46
See merge request isc-projects/bind9!3063
(cherry picked from commit a04cdde45d)
d2b5853b Start enforcing the clang-format rules on changed files
618947c6 Switch AlwaysBreakAfterReturnType from TopLevelDefinitions to All
654927c8 Add separate .clang-format files for headers
5777c44a Reformat using the new rules
60d29f69 Don't enforce copyrights on .clang-format
adjust clang-format options to get closer to ISC style
See merge request isc-projects/bind9!3061
(cherry picked from commit d3b49b6675)
0255a974 revise .clang-format and add a C formatting script in util
e851ed0b apply the modified style
Add curly braces using uncrustify and then reformat with clang-format back
Closes#46
See merge request isc-projects/bind9!3057
(cherry picked from commit 67b68e06ad)
36c6105e Use coccinelle to add braces to nested single line statement
d14bb713 Add copy of run-clang-tidy that can fixup the filepaths
056e133c Use clang-tidy to add curly braces around one-line statements
Reformat source code with clang-format
Closes#46
See merge request isc-projects/bind9!2156
(cherry picked from commit 7099e79a9b)
4c3b063e Import Linux kernel .clang-format with small modifications
f50b1e06 Use clang-format to reformat the source files
11341c76 Update the definition files for Windows
df6c1f76 Remove tkey_test (which is no-op anyway)
The key-directory keyword actually does nothing right now but may
be useful in the future if we want to differentiate between key
directories or HSM keys, or if we want to speficy different
directories for different keys or policies. Make it optional for
the time being.
The keyword 'unlimited' can be used instead of PT0S which means the
same but is more comprehensible for users.
Also fix some redundant "none" parameters in the kasp test.
This commit makes some minor changes to the trust anchor code:
1. Replace the undescriptive n1, n2 and n3 identifiers with slightly
better rdata1, rdata2, and rdata3.
2. Fix an occurrence where in the error log message a static number
32 was printed, rather than the rdata3 length.
3. Add a default case to the switch statement checking DS digest
algorithms to catch unknown algorithms.
