it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
(cherry picked from commit f619708bbf)
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
(cherry picked from commit 16e14353b1)
Configure "none" as a builtin policy. Change the 'cfg_kasp_fromconfig'
api so that the 'name' will determine what policy needs to be
configured.
When transitioning a zone from secure to insecure, there will be
cases when a zone with no DNSSEC policy (dnssec-policy none) should
be using KASP. When there are key state files available, this is an
indication that the zone once was DNSSEC signed but is reconfigured
to become insecure.
If we would not run the keymgr, named would abruptly remove the
DNSSEC records from the zone, making the zone bogus. Therefore,
change the code such that a zone will use kasp if there is a valid
dnssec-policy configured, or if there are state files available.
(cherry picked from commit cf420b2af0)
This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
This is a part of the works that intends to make the netmgr stable,
testable, maintainable and tested. It contains a numerous changes to
the netmgr code and unfortunately, it was not possible to split this
into smaller chunks as the work here needs to be committed as a complete
works.
NOTE: There's a quite a lot of duplicated code between udp.c, tcp.c and
tcpdns.c and it should be a subject to refactoring in the future.
The changes that are included in this commit are listed here
(extensively, but not exclusively):
* The netmgr_test unit test was split into individual tests (udp_test,
tcp_test, tcpdns_test and newly added tcp_quota_test)
* The udp_test and tcp_test has been extended to allow programatic
failures from the libuv API. Unfortunately, we can't use cmocka
mock() and will_return(), so we emulate the behaviour with #define and
including the netmgr/{udp,tcp}.c source file directly.
* The netievents that we put on the nm queue have variable number of
members, out of these the isc_nmsocket_t and isc_nmhandle_t always
needs to be attached before enqueueing the netievent_<foo> and
detached after we have called the isc_nm_async_<foo> to ensure that
the socket (handle) doesn't disappear between scheduling the event and
actually executing the event.
* Cancelling the in-flight TCP connection using libuv requires to call
uv_close() on the original uv_tcp_t handle which just breaks too many
assumptions we have in the netmgr code. Instead of using uv_timer for
TCP connection timeouts, we use platform specific socket option.
* Fix the synchronization between {nm,async}_{listentcp,tcpconnect}
When isc_nm_listentcp() or isc_nm_tcpconnect() is called it was
waiting for socket to either end up with error (that path was fine) or
to be listening or connected using condition variable and mutex.
Several things could happen:
0. everything is ok
1. the waiting thread would miss the SIGNAL() - because the enqueued
event would be processed faster than we could start WAIT()ing.
In case the operation would end up with error, it would be ok, as
the error variable would be unchanged.
2. the waiting thread miss the sock->{connected,listening} = `true`
would be set to `false` in the tcp_{listen,connect}close_cb() as
the connection would be so short lived that the socket would be
closed before we could even start WAIT()ing
* The tcpdns has been converted to using libuv directly. Previously,
the tcpdns protocol used tcp protocol from netmgr, this proved to be
very complicated to understand, fix and make changes to. The new
tcpdns protocol is modeled in a similar way how tcp netmgr protocol.
Closes: #2194, #2283, #2318, #2266, #2034, #1920
* The tcp and tcpdns is now not using isc_uv_import/isc_uv_export to
pass accepted TCP sockets between netthreads, but instead (similar to
UDP) uses per netthread uv_loop listener. This greatly reduces the
complexity as the socket is always run in the associated nm and uv
loops, and we are also not touching the libuv internals.
There's an unfortunate side effect though, the new code requires
support for load-balanced sockets from the operating system for both
UDP and TCP (see #2137). If the operating system doesn't support the
load balanced sockets (either SO_REUSEPORT on Linux or SO_REUSEPORT_LB
on FreeBSD 12+), the number of netthreads is limited to 1.
* The netmgr has now two debugging #ifdefs:
1. Already existing NETMGR_TRACE prints any dangling nmsockets and
nmhandles before triggering assertion failure. This options would
reduce performance when enabled, but in theory, it could be enabled
on low-performance systems.
2. New NETMGR_TRACE_VERBOSE option has been added that enables
extensive netmgr logging that allows the software engineer to
precisely track any attach/detach operations on the nmsockets and
nmhandles. This is not suitable for any kind of production
machine, only for debugging.
* The tlsdns netmgr protocol has been split from the tcpdns and it still
uses the old method of stacking the netmgr boxes on top of each other.
We will have to refactor the tlsdns netmgr protocol to use the same
approach - build the stack using only libuv and openssl.
* Limit but not assert the tcp buffer size in tcp_alloc_cb
Closes: #2061
(cherry picked from commit 634bdfb16d)
The DNS Flag Day 2020 reduced all the EDNS buffer sizes to 1232. In
this commit, we revert the default value for nocookie-udp-size back to
4096 because the option is too obscure and most people don't realize
that they also need to change this configuration option in addition to
max-udp-size.
(cherry picked from commit 79c196fc77)
Since the queries sent towards root and TLD servers are now included in
the count (as a result of the fix for CVE-2020-8616),
"max-recursion-queries" has a higher chance of being exceeded by
non-attack queries. Increase its default value from 75 to 100.
(cherry picked from commit ab0bf49203)
When generating a new salt, compare it with the previous NSEC3
paremeters to ensure the new parameters are different from the
previous ones.
This moves the salt generation call from 'bin/named/*.s' to
'lib/dns/zone.c'. When setting new NSEC3 parameters, you can set a new
function parameter 'resalt' to enforce a new salt to be generated. A
new salt will also be generated if 'salt' is set to NULL.
Logging salt with zone context can now be done with 'dnssec_log',
removing the need for 'dns_nsec3_log_salt'.
(cherry picked from commit 6b5d7357df)
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
(cherry picked from commit 6f97bb6b1f)
The 'rndc signing' command allows you to manipulate the private
records that are used to store signing state. Don't use these with
'dnssec-policy' as such manipulations may violate the policy (if you
want to change the NSEC3 parameters, change the policy and reconfig).
(cherry picked from commit eae9a6d297)
When doing 'rndc reconfig', named may complain about a zone not being
reusable because it has a raw version of the zone, and the new
configuration has not set 'inline-signing'. However, 'inline-signing'
may be implicitly true if a 'dnssec-policy' is used for the zone, and
the zone is not dynamic.
Improve the check in 'named_zone_reusable'. Create a new function for
checking 'inline-signing' configuration that matches existing code in
'bin/named/server.c'.
(cherry picked from commit ba8128ea00)
Implement support for NSEC3 in dnssec-policy. Store the configuration
in kasp objects. When configuring a zone, call 'dns_zone_setnsec3param'
to queue an nsec3param event. This will ensure that any previous
chains will be removed and a chain according to the dnssec-policy is
created.
Add tests for dnssec-policy zones that uses the new 'nsec3param'
option, as well as changing to new values, changing to NSEC, and
changing from NSEC.
(cherry picked from commit 114af58ee2)
We will be using this function also on reconfig, so it should have
a wider availability than just bin/named/server.
(cherry picked from commit 84a4273074)
Before this update, BIND would attempt to do a full recursive resolution
process for each query received if the requested rrset had its ttl
expired. If the resolution fails for any reason, only then BIND would
check for stale rrset in cache (if 'stale-cache-enable' and
'stale-answer-enable' is on).
The problem with this approach is that if an authoritative server is
unreachable or is failing to respond, it is very unlikely that the
problem will be fixed in the next seconds.
A better approach to improve performance in those cases, is to mark the
moment in which a resolution failed, and if new queries arrive for that
same rrset, try to respond directly from the stale cache, and do that
for a window of time configured via 'stale-refresh-time'.
Only when this interval expires we then try to do a normal refresh of
the rrset.
The logic behind this commit is as following:
- In query.c / query_gotanswer(), if the test of 'result' variable falls
to the default case, an error is assumed to have happened, and a call
to 'query_usestale()' is made to check if serving of stale rrset is
enabled in configuration.
- If serving of stale answers is enabled, a flag will be turned on in
the query context to look for stale records:
query.c:6839
qctx->client->query.dboptions |= DNS_DBFIND_STALEOK;
- A call to query_lookup() will be made again, inside it a call to
'dns_db_findext()' is made, which in turn will invoke rbdb.c /
cache_find().
- In rbtdb.c / cache_find() the important bits of this change is the
call to 'check_stale_header()', which is a function that yields true
if we should skip the stale entry, or false if we should consider it.
- In check_stale_header() we now check if the DNS_DBFIND_STALEOK option
is set, if that is the case we know that this new search for stale
records was made due to a failure in a normal resolution, so we keep
track of the time in which the failured occured in rbtdb.c:4559:
header->last_refresh_fail_ts = search->now;
- In check_stale_header(), if DNS_DBFIND_STALEOK is not set, then we
know this is a normal lookup, if the record is stale and the query
time is between last failure time + stale-refresh-time window, then
we return false so cache_find() knows it can consider this stale
rrset entry to return as a response.
The last additions are two new methods to the database interface:
- setservestale_refresh
- getservestale_refresh
Those were added so rbtdb can be aware of the value set in configuration
option, since in that level we have no access to the view object.
The DNS Flag Day 2020 aims to remove the IP fragmentation problem from
the UDP DNS communication. In this commit, we implement the minimal
required changes by changing the defaults for `edns-udp-size`,
`max-udp-size` and `nocookie-udp-size` to `1232` (the value picked by
DNS Flag Day 2020).
(cherry picked from commit bb990030d3)
This command is similar in arguments as -checkds so refactor the
'named_server_dnssec' function accordingly. The only difference
are that:
- It does not take a "publish" or "withdrawn" argument.
- It requires the key id to be set (add a check to make sure).
Add tests that will trigger rollover immediately and one that
schedules a test in the future.
(cherry picked from commit e826facadb)
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
(cherry picked from commit 57b4dde974)
"showzone" and "tsig-list" both used exclusive mode unnecessarily;
changing this will simplify future refactoring a bit.
(cherry picked from commit 002c328437)
This flag is the same as -cache, but will use a different style format
that will also print expired entries (awaiting cleanup) from the cache.
(cherry picked from commit 8beda7d2ea)
The dotat() function has been changed to send the TAT
query asynchronously, so there's no lock order loop
because we initialize the data first and then we schedule
the TAT send to happen asynchronously.
This breaks following lock-order loops:
zone->lock (dns_zone_setviewcommit) while holding view->lock
(dns_view_setviewcommit)
keytable->lock (dns_keytable_find) while holding zone->lock
(zone_asyncload)
view->lock (dns_view_findzonecut) while holding keytable->lock
(dns_keytable_forall)
(cherry picked from commit 3c4b68af7c)
An implicit default of "max-cache-size 90%;" may cause memory use issues
on hosts which run numerous named instances in parallel (e.g. GitLab CI
runners) due to the cache RBT hash table now being pre-allocated [1] at
startup. Add a new command line option, "-T maxcachesize=...", to allow
the default value of "max-cache-size" to be overridden at runtime. When
this new option is in effect, it overrides any other "max-cache-size"
setting in the configuration, either implicit or explicit. This
approach was chosen because it is arguably the simplest one to
implement.
The following alternative approaches to solving this problem were
considered and ultimately rejected (after it was decided they were not
worth the extra code complexity):
- adding the same command line option, but making explicit
configuration statements have priority over it,
- adding a build-time option that allows the implicit default of
"max-cache-size 90%;" to be overridden.
[1] see commit aa72c31422
(cherry picked from commit 9ac1f6a9bc)
In the rare case that you have multiple keys acting as KSK and that
have the same keytag, you can now set the algorithm when calling
'-checkds'.
(cherry picked from commit 46fcd927e7)
Add a new 'rndc' command 'dnssec -checkds' that allows the user to
signal named that a new DS record has been seen published in the
parent, or that an existing DS record has been withdrawn from the
parent.
Upon the 'checkds' request, 'named' will write out the new state for
the key, updating the 'DSPublish' or 'DSRemoved' timing metadata.
This replaces the "parent-registration-delay" configuration option,
this was unreliable because it was purely time based (if the user
did not actually submit the new DS to the parent for example, this
could result in an invalid DNSSEC state).
Because we cannot rely on the parent registration delay for state
transition, we need to replace it with a different guard. Instead,
if a key wants its DS state to be moved to RUMOURED, the "DSPublish"
time must be set and must not be in the future. If a key wants its
DS state to be moved to UNRETENTIVE, the "DSRemoved" time must be set
and must not be in the future.
By default, with '-checkds' you set the time that the DS has been
published or withdrawn to now, but you can set a different time with
'-when'. If there is only one KSK for the zone, that key has its
DS state moved to RUMOURED. If there are multiple keys for the zone,
specify the right key with '-key'.
(cherry picked from commit 04d8fc0143)
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
(cherry picked from commit ce53db34d6)
Created isc_refcount_decrement_expect macro to test conditionally
the return value to ensure it is in expected range. Converted
unchecked isc_refcount_decrement to use isc_refcount_decrement_expect.
Converted INSIST(isc_refcount_decrement()...) to isc_refcount_decrement_expect.
(cherry picked from commit bde5c7632a)
server might be created, but not yet fully initialized, when fatal
function is called. Check both server and task before attaching
exclusive task.
(cherry picked from commit c5e7152cf0)
