Add checks to the kasp system test to verify CDNSKEY publication.
This test is not entirely complete, because when there is a CDNSKEY
available but there should not be one for KEY N, it is hard to tell
whether the existing CDNSKEY actually belongs to KEY N or another
key.
The check works if we expect a CDNSKEY although we cannot guarantee
that the CDNSKEY is correct: The test verifies existence, not
correctness of the record.
When you do a restart or reconfig of named, or rndc loadkeys, this
triggers the key manager to run. The key manager will check if new
keys need to be created. If there is an active key, and key rollover
is scheduled far enough away, no new key needs to be created.
However, there was a bug that when you just start to sign your zone,
it takes a while before the KSK becomes an active key. An active KSK
has its DS submitted or published, but before the key manager allows
that, the DNSKEY needs to be omnipresent. If you restart named
or rndc loadkeys in quick succession when you just started to sign
your zone, new keys will be created because the KSK is not yet
considered active.
Fix is to check for introducing as well as active keys. These keys
all have in common that their goal is to become omnipresent.
10067 cleanup:
CID 1452683 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking dispatch suggests that it
may be null, but it has already been dereferenced on all
paths leading to the check.
10068 if (dispatch != NULL)
10069 isc_mem_put(server->mctx, dispatch, sizeof(*dispatch));
122 cleanup:
CID 1452696 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking s suggests that it may be
null, but it has already been dereferenced on all paths
leading to the check.
123 if (s != NULL)
124 isc_mem_free(mctx, s);
11030 cleanup:
CID 1452705 (#1 of 1): Dereference before null check
(REVERSE_INULL) check_after_deref: Null-checking dctx
suggests that it may be null, but it has already been
dereferenced on all paths leading to the check.
11031 if (dctx != NULL)
11032 dumpcontext_destroy(dctx);
11033 return (result);
13836 if (zone != NULL)
13837 dns_zone_detach(&zone);
null: At condition dz != NULL, the value of dz must be NULL.
dead_error_condition: The condition dz != NULL cannot be true.
13838 if (dz != NULL) {
CID 1453456 (#1 of 1): Logically dead code (DEADCODE)
dead_error_begin: Execution cannot reach this statement:
dns_zone_detach(&dz->zone);.
13839 dns_zone_detach(&dz->zone);
13840 isc_mem_put(named_g_mctx, dz, sizeof(*dz));
13841 }
Increase the short lived record TTL and negative SOA TTL to make
this test less vulnerable to timing issues. The drawback is that we
also have to sleep longer in this test.
Add queries and checks for CAA RRtype in the serve-stale test.
Ensure that the "Others" rrtype stat counter is incremented and
decremented properly if the RRset becomes stale/ancient.
The low max-stale-ttl config option needs to be increased in order
to match the timing when things expire (aka become ancient).
- Add quotes before and after zone name when generating "addzone"
input so avoid "unexpected token" errors.
- Use a hex digest for zone filenames when the zone or view name
contains a slash.
- Test with a domain name containing a slash.
- Incidentally added 'catzhash.py' to contrib/scripts to generate
hash labels for catalog zones, as it was needed to write the test.
The isc_buffer_allocate() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_buffer_allocate() now returns void.
The isc_mempool_create() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_mempool_create() now returns void.
Each system test can be marked as failed not only due to some tested
component(s) not behaving as expected, but also because of core dumps,
assertion failures, and/or ThreadSanitizer reports being found among its
artifacts. Make the system test summary list the tests which exhibit
such atypical symptoms to more clearly present the nature of problems
found.
Added test to ensure that NXDOMAIN is returned when BIND is queried for a
non existing domain in CH class (if a view of CHAOS class is configured)
and that it also doesn't crash anymore in those cases.
This is a bug I encountered when trying to schedule an algorithm
rollover. My plan, for a zone whose maximum TTL is 48h, was to sign
with the new algorithm and schedule a change of CDS records for more
than 48 hours in the future, roughly like this:
$ dnssec-keygen -a 13 -fk -Psync now+50h $zone
$ dnssec-keygen -a 13 $zone
$ dnssec-settime -Dsync now+50h $zone_ksk_old
However the algorithm 13 CDS was published immediately, which could
have made the zone bogus.
To reveal the bug using the `smartsign` test, this change just adds a
KSK with all its times in the future, so it should not affect the
existing checks at all. But the final check (that there are no CDS or
CDSNSKEY records after -Dsync) fails with the old `syncpublish()`
logic, because the future key's sync records appear early. With the
new `syncpublish()` logic the future key does not affect the test, as
expected, and it now passes.
hp implementation requires an object for each thread accessing
a hazard pointer. previous implementation had a hardcoded
HP_MAX_THREAD value of 128, which failed on machines with lots of
CPU cores (named uses 3n threads). We make isc__hp_max_threads
configurable at startup, with the value set to 4*named_g_cpus.
It's also important for this value not to be too big as we do
linear searches on a list.
the internal keytable structure has not yet been changed, but
insertion of DS anchors is the only method now available.
NOTE: the keytable unit test is currently failing because of tests
that expect individual keynode objects to contain single DST key
objects.
as initial-key and static-key trust anchors will now be stored as a
DS rrset, code referencing keynodes storing DNSKEY trust anchors will
no longer be reached.
- the socket stat counters have been moved from socket.h to stats.h.
- isc_nm_t now attaches to the same stats counter group as
isc_socketmgr_t, so that both managers can increment the same
set of statistics
- isc__nmsocket_init() now takes an interface as a paramter so that
the address family can be determined when initializing the socket.
- based on the address family and socket type, a group of statistics
counters will be associated with the socket - for example, UDP4Active
with IPv4 UDP sockets and TCP6Active with IPv6 TCP sockets. note
that no counters are currently associated with TCPDNS sockets; those
stats will be handled by the underlying TCP socket.
- the counters are not actually used by netmgr sockets yet; counter
increment and decrement calls will be added in a later commit.
Before this change, there was a missing blank line between the
negative trust anchors for one view, and the heading line for the next
view. This is because dns_ntatable_totext() omits the last newline.
There is an example of the incorrect output below; the fixed output
has a blank line before "Start view auth".
secure roots as of 21-Oct-2019 12:03:23.500:
Start view rec
Secure roots:
./RSASHA256/20326 ; managed
Negative trust anchors:
example.com: expiry 21-Oct-2019 13:03:15.000
Start view auth
Secure roots:
./RSASHA256/20326 ; managed
Negative trust anchors:
example.com: expiry 21-Oct-2019 13:03:07.000
"rndc signing -serial <value>" could take longer than a second to
complete. Loop waiting for update to succeed.
For tests where "rndc signing -serial <value>" is supposed to not
succeed, repeatedly test that we don't get the new serial, then
test that we have the old value. This should prevent false negatives.
