Some versions of the Hypothesis Python library - notably the one
included in stock OS repositories for Ubuntu 20.04 Focal Fossa - cause a
.hypothesis file to be created in a Python script's working directory
when the hypothesis module is present in its import chain. Ignore such
files by adding them to the list of expected test artifacts to prevent
pytest teardown checks from failing due to these files appearing in the
file system after running system tests.
Commit 6c010a5644 caused the PYTHONPATH
environment variable to be set for ans.py servers started using
start.pl. However, no system test has actually used the new
isctest.asyncserver module since that change was applied, so it has not
been noticed until now that including the source directory in PYTHONPATH
is only sufficient for in-tree builds. Include the build directory
instead of the source directory in the PYTHONPATH environment variable
set for ans.py servers started by start.pl so that they work correctly
for both in-tree and out-of-tree builds.
Replace custom DNS servers used in the "qmin" system test with new code
based on the isctest.asyncserver module. The revised code employs zone
files and a limited amount of custom logic, which massively improves
test readability and maintainability, extends logging, and fixes
non-compliant replies sent by some of the custom servers in response to
certain queries (e.g. AA=0 in authoritative empty non-terminal
responses, non-glue address records in ADDITIONAL section).
when a key is revoked its key ID changes, due to the inclusion
of the "revoke" flag. a collision between this changed key ID and
that of an unrelated public-only key could cause a crash in
dnssec-signzone.
The 'I:checking that lifting the limit will allow everything to get
cached (20)' test was failing due to the TTL of the records being
too short for the elapsed time of the test. Raise the TTL to fix
this and adjust other tests as needed.
When performing QNAME minimization, named now sends an NS
query for the original QNAME, to prevent the parent zone from
receiving the QTYPE.
For example, when looking up example.com/A, we now send NS queries
for both com and example.com before sending the A query to the
servers for example.com. Previously, an A query for example.com
would have been sent to the servers for com.
Several system tests needed to be adjusted for the new query pattern:
- Some queries in the serve-stale test were sent to the wrong server.
- The synthfromdnssec test could fail due to timing issues; this
has been addressed by adding a 1-second delay.
- The cookie test could fail due to the a change in the count of
TSIG records received in the "check that missing COOKIE with a
valid TSIG signed response does not trigger TCP fallback" test case.
- The GL #4652 regression test case in the chain system test depends
on a particular query order, which no longer occurs when QNAME
minimization is active. We now disable qname-minimization
for that test.
When generating new key pairs, one test checks if existing keys that
match the time bundle are selected, rather than extra keys being
generated. Part of the test is to check the verbose output, counting
the number of "Selecting" and "Generating" occurences. But if there
is a key collision, the ksr tool will output that the key already
exists and includes the substring "already exists, or might collide
with another key upon revokation. Generating a new key".
So substract by one the generated counter if there is a "collide"
occurrence.
when running a system test with the USE_RR environment
variable set to 1, an rr trace is generated for named.
because rr wasn't run using libtool --mode=execute, the
trace would actually be generated for the wrapper script
generated by libtool, not for the actual named binary.
Since algorithm fetching is handled purely in libisc, FIPS mode toggling
can be purely done in within the library instead of provider fetching in
the binary for OpenSSL >=3.0.
Disabling FIPS mode isn't a realistic requirement and isn't done
anywhere in the codebase. Make the FIPS mode toggle enable-only to
reflect the situation.
Now that fctx_try is being called when adb returns DNS_ADB_NOMOREADDRESSES
we don't need these priming queries for the dual-stack-servers test
to succeed.
previously, dns_name_fromtext() took both a target name and an
optional target buffer parameter, which could override the name's
dedicated buffer. this interface is unnecessarily complex.
we now have two functions, dns_name_fromtext() to convert text
into a dns_name that has a dedicated buffer, and dns_name_wirefromtext()
to convert text into uncompressed DNS wire format and append it to a
target buffer.
in cases where it really is necessary to have both, we can use
dns_name_fromtext() to load the dns_name, then dns_name_towire()
to append the wire format to the target buffer.
The offsets were meant to speed-up the repeated dns_name operations, but
it was experimentally proven that there's actually no real-world
benefit. Remove the offsets and labels fields from the dns_name and the
static offsets fields to save 128 bytes from the fixedname in favor of
calculating labels and offsets only when needed.
The DNS header shows if a message has multiple questions or invalid
NOTIFY sections. We can drop these messages early, right after parsing
the question. This matches RFC 9619 for multi-question messages and
Unbound's handling of NOTIFY.
To further add further robustness, we include an additional check for
unknown opcodes, and also drop those messages early.
Add early_sanity_check() function to check for these conditions:
- Messages with more than one question, as required by RFC 9619
- NOTIFY query messages containing answer sections (like Unbound)
- NOTIFY messages containing authority sections (like Unbound)
- Unknown opcodes.
The zone file for example3 (ns1/example3.db) can be modified in the
upforwd test as example3 is updated as part of the test. Whether
the zone is written out or not by the end of the test is timing
dependent. Rename ns1/example3.db to ns1/example3.db.in and copy
it to ns1/example3.db in setup so we don't trigger post test changes
checks.
Instead of relying on unreliable order of execution of the library
constructors and destructors, move them to individual binaries. The
advantage is that the execution time and order will remain constant and
will not depend on the dynamic load dependency solver.
This requires more work, but that was mitigated by a simple requirement,
any executable using libisc and libdns, must include <isc/lib.h> and
<dns/lib.h> respectively (in this particular order). In turn, these two
headers must not be included from within any library as they contain
inlined functions marked with constructor/destructor attributes.
Previously a hard-coded limitation of maximum two key or message
verification checks were introduced when checking the message's
SIG(0) signature. It was done in order to protect against possible
DoS attacks. The logic behind choosing the number two was that more
than one key should only be required only during key rotations, and
in that case two keys are enough. But later it became apparent that
there are other use cases too where even more keys are required, see
issue number #5050 in GitLab.
This change introduces two new configuration options for the views,
sig0key-checks-limit and sig0message-checks-limit, which define how
many keys are allowed to be checked to find a matching key, and how
many message verifications are allowed to take place once a matching
key has been found. The latter protects against expensive cryptographic
operations when there are keys with colliding tags and algorithm
numbers, with default being 2, and the former protects against a bit
less expensive key parsing operations and defaults to 16.
Add a new big zone, run a zone transfer in slow mode, and check
whether the zone transfer gets canceled because 100000 bytes are
not transferred in 5 seconds (as it's running in slow mode).
- there are now two functions for getting rdataslab size:
dns_rdataslab_size() is for full slabs and dns_rdataslab_sizeraw()
for raw slabs. there is no longer a need for a reservelen parameter.
- dns_rdataslab_count() also no longer takes a reservelen parameter.
(currently it's never used for raw slabs, so there is no _countraw()
function.)
- dns_rdataslab_rdatasize() has been removed, because
dns_rdataslab_sizeraw() can do the same thing.
- dns_rdataslab_merge() and dns_rdataslab_subtract() both take
slabheader parameters instead of character buffers, and the
reservelen parameter has been removed.
This check in the nsupdate system test expects the opaque
representation of the "dohpath" Service Parameter Key. Use
the +svcparamkeycompat dig option to enable it.
If a deferred validation on data that was originally queried with
CD=1 fails, we now repeat the query, since the zone data may have
changed in the meantime.
In some cases, the numeric identifier doesn't correspond to the
directory name (i.e. `resolver` server in `shutdown` test, which is
supposed to be 10.53.0.3). These are typically servers that shouldn't be
auto-started by the runner, thus avoiding the typical `*ns<X>` name.
Support these server by allowing a fallback initialization with custom
numeric identifier in case it can't be parsed from the directory name.
The start()/stop() functions can be used in the pytests in the same way
as start_server and stop_server functions were used in shell tests. Note
that the servers obtained through the servers fixture are still started
and stopped by the test runner at the start and end of the test. This
makes these functions mostly useful for restarting the server(s)
mid-test.
Previously, these functions have been provided as fixtures. This was
limiting re-use, because it wasn't possible to call these outside of
tests / other fixtures without passing these utility functions around.
Move them into isctest.run package instead.
The ANS servers were not to written to handle NS queries at the
QNAME resulting in gratuitious protocol errors that will break tests
when NS requests are made for the QNAME.
In #1870, the expiration time of ANCIENT records were printed, but
actually the ancient records are very short lived, and the information
carries a little value.
Instead of printing the expiration of ANCIENT records, print the
expiration time of STALE records.
Michał Kępień
Aram Sargsyan
Evan Hunt
Mark Andrews
Matthijs Mekking
Colin Vidal
Ondřej Surý
Aydın Mercan
alessio
Michal Nowak
Nicki KřížekandMichal Nowak