Free/detach tsigkey and sig0key when exiting and then call
dst_lib_destroy if we have previously called dst_lib_init. This will,
in theory, allow OPENSSL_cleanup to free all memory.
This changes the internal isc_rwlock implementation to:
Irina Calciu, Dave Dice, Yossi Lev, Victor Luchangco, Virendra
J. Marathe, and Nir Shavit. 2013. NUMA-aware reader-writer locks.
SIGPLAN Not. 48, 8 (August 2013), 157–166.
DOI:https://doi.org/10.1145/2517327.24425
(The full article available from:
http://mcg.cs.tau.ac.il/papers/ppopp2013-rwlocks.pdf)
The implementation is based on the The Writer-Preference Lock (C-RW-WP)
variant (see the 3.4 section of the paper for the rationale).
The implemented algorithm has been modified for simplicity and for usage
patterns in rbtdb.c.
The changes compared to the original algorithm:
* We haven't implemented the cohort locks because that would require a
knowledge of NUMA nodes, instead a simple atomic_bool is used as
synchronization point for writer lock.
* The per-thread reader counters are not being used - this would
require the internal thread id (isc_tid_v) to be always initialized,
even in the utilities; the change has a slight performance penalty,
so we might revisit this change in the future. However, this change
also saves a lot of memory, because cache-line aligned counters were
used, so on 32-core machine, the rwlock would be 4096+ bytes big.
* The readers use a writer_barrier that will raise after a while when
readers lock can't be acquired to prevent readers starvation.
* Separate ingress and egress readers counters queues to reduce both
inter and intra-thread contention.
Include MD5 feature detection in featuretest tool and use it in some
places. When RHEL distribution or Fedora ELN is in FIPS mode, then MD5
algorithm is unavailable completely and even hmac-md5 algorithm usage
will always fail. Work that around by checking MD5 works and if not,
skipping its usage.
Those changes were dragged as downstream patch bind-9.11-fips-tests.patch
in Fedora and RHEL.
Tests using diff to compare outputs of dig +short shall ignore lines
starting with ";". In dig +short output, such lines should only be
present for errors such as network issues. Since we utilize dig's
default timeout/retry mechanisms, these transitory issues should be
ignored and only the final output should be considered during the diff
comparison.
This adds an island of trust that is reachable from the root
where the trust anchors are added to island.conf.
This add an island of trust that is not reachable from the root
where the trust anchors are added to private.conf.
removed some functions that are no longer used and unlikely to
be resurrected, and also some that were only used to support Windows
and can now be replaced with generic versions.
Occasionally, the allotted 10 seconds for the "running" line to appear
in log after named is started proved insufficient in CI, especially
during increased load. Give named up to 60 seconds to start up to
mitigate this issue.
- removed documentation of -S option from named man page
- removed documentation of reserved-sockets from ARM
- simplified documentation of dnssec-secure-to-insecure - it
now just says it's obsolete rather than describing what it
doesn't do anymore
- marked three formerly obsolete options as ancient:
parent-registration-delay, reserved-sockets, and
suppress-initial-notify
isc_bind9 was a global bool used to indicate whether the library
was being used internally by BIND or by an external caller. external
use is no longer supported, but the variable was retained for use
by dyndb, which needed it only when being built without libtool.
building without libtool is *also* no longer supported, so the variable
can go away.
Send the test message from ns3 to ns2 instead of ns2 to ns3 as ns2
is started first and therefore the test doesn't have to wait on the
resend of the the NOTIFY message to be successful.
Move and give unique names to the dns_db_t, dns_dbnode_t and
dns_dbversion_t pointers, so they have global scope and therefore
are visible to cleanup. Unique names are not strictly necessary,
as none of the functions involved call each other.
Change free_db to handle NULL pointers and also an optional
(dns_dbversion_t **).
In match_keyset_dsset and free_keytable, ki to be handled
differently to prevent a false positive NULL pointer dereference
warning from scan.
In formatset moved dns_master_styledestroy earlier and freed
buf before calling check_result to prevent memory leak.
In append_new_ds_set freed ds on the default path before
calling check_result to prevent memory leak.
the nsupdate system test was intermittently failing due to the update
quota not being exceeded when it should have been. this is most likely
a timing issue: the client is sending updates too slowly, or the server
is processing them too quickly, for the quota to fill. this commit
attempts to make that the failure less likely by increasing the number
of update transactions from 10 to 20.
Following deleting the root trust anchor and reconfiguring the
server it takes some time to for trust anchor to appear in 'rndc
managed-keys status' output. Retry several times.
It is trivial to fully cleanup memory on all the error paths in
named-rrchecker, many of which are triggered by bad user input.
This involves freeing lex and mctx if they exist when fatal is
called.
check in the log files of receiving servers that the originating
ports for notify and SOA query messages were set correctly from
configured notify-source and transfer-source options.
the built-in trust anchors in named and delv are sufficent for
validation. named still needs to be able to load trust anchors from
a bind.keys file for testing purposes, but it doesn't need to be
the default behavior.
we now only load trust anchors from a file if explicitly specified
via the "bindkeys-file" option in named or the "-a" command line
argument to delv. documentation has been cleaned up to remove references
to /etc/bind.keys.
Closes#3850.
it was possible for a managed trust anchor needing to send a key
refresh query to be unable to do so because an authoritative zone
was not yet loaded. this has been corrected by delaying the
synchronization of managed-keys zones until after all zones are
loaded.
* rbt node chains were sized to allow for bitstring labels, so they
had 256 levels; but in the absence of bistrings, 128 is enough.
* dns_byaddr_createptrname() had a redundant options argument,
and a very outdated doc comment.
* A number of comments referred to bitstring labels in a way that is
no longer helpful. (A few informative comments remain.)
Commit b69e783164 changed the scope of the
local 'view' variable in load_configuration(), but the code section
guarded by the #ifdef USE_DNSRPS directive was not adjusted accordingly,
causing build errors for DNSRPS-enabled builds. Fix the latter by
declaring the 'view' variable inside the loop in the DNSRPS-specific
block of code.
If the address lookup of the primary server fails just abort
the current update request rather than calling exit. This allows
nsupdate to cleanup gracefully.
The ADB hashmaps are stored in extra memory contexts, so the hash
tables are excluded from the overmem accounting. The new memory
context was unnamed, give it a proper name.
Same thing has happened with extra memory context used for named
global log context - give the extra memory context a proper name.
Set the DS state after issuing 'rndc dnssec -checkds'. If the DS
was published, it should go in RUMOURED state, regardless whether it
is already safe to do so according to the state machine.
Leaving it in HIDDEN (or if it was magically already in OMNIPRESENT or
UNRETENTIVE) would allow for easy shoot in the foot situations.
Similar, if the DS was withdrawn, the state should be set to
UNRETENTIVE. Leaving it in OMNIPRESENT (or RUMOURED/HIDDEN)
would also allow for easy shoot in the foot situations.
The total memory counter had again little or no meaning when we removed
the internal memory allocator. It was just a monotonic counter that
would count add the allocation sizes but never subtracted anything, so
it would be just a "big number".
The maxinuse memory counter indicated the highest amount of
memory allocated in the past. Checking and updating this high-
water mark value every time memory was allocated had an impact
on server performance, so it has been removed. Memory size can
be monitored more efficiently via an external tool logging RSS.
The malloced and maxmalloced memory counters were mostly useless since
we removed the internal allocator blocks - it would only differ from
inuse by the memory context size itself.
The signal handler in the isc_loop would wait for all the work to finish
before interrupting the signing. Add teardown handlers via
isc_loopmgr_teardown() to signal the assignwork() it should stop signing
and bail-out early.
NOTE: The dnssec-signzone binary still can't be interrupted during zone
loading, zone cleaning, nsec(3) chain generation or zone writing. This
might get addressed in the future if it becomes a problem.
Instead of dumping the signed zone contents node by node during the
signing, dump the entire zone at the end. This was already done for the
raw zone format, but it shows that the IO is better utilized when the
zone dump is done in one single write rather than in small chunks.
A side effect of dumping node by node was that all names were printed
relative to the zone origin rather than being grouped under different
$ORIGINs as would normally be the case when dumping a zone. Also, state
was not maintained from one node to the next regarding whether the CLASS
has already been printed, so it was always included with the first
record of each node.
Since dnssec-signzone uses the dns_master_style_explicittl text format
style, and is the only application that does so, we can revise that
style and add a new DNS_STYLEFLAG_CLASS_PERNAME flag to get the output
back to what it was before this change.
Use isc_job_run() instead of isc_task_send() for dnssec-signzone
worker threads.
Also fix the issue where the additional assignwork() would be run only
from the main thread effectively serializing all the signing.
The validity default days value of 1 was used for debugging and
left as such accidentally.
Use 10950 days, as used elsewhere (for example, in doth test CA).
This does not affect anything, the value will be effective when
generating new test certificates in the future.
Change the 'forward' system test to enable DoT on ns2 server,
and test that forwarding from ns4 to the DoT-enabled ns2 works.
In order to test different scenarios, create a test CA (based on
similar CAs for 'doth' and 'nsupdate' system tests), and test
both insecure (no certificate validation) and secure (also with
mutual TLS) TLS configurations, as well as a configuration with an
expired certificate.
Add support for loading and validating the 'tls' parameter from
the forwarders' configuration.
This prepares ground for adding support to forward queries to
DoT-enabled upstream servers.
A 'tls' statement can be specified both for individual addresses
and for the whole list (as a default value when an individual
address doesn't have its own 'tls' set), just as it was done
before for the 'port' value.
Create a new function 'print_rawqstring()' to print a string residing
in a 'isc_textregion_t' type parameter.
Create a new function 'copy_string()' to copy a string from a
'cfg_obj_t' object into a 'isc_textregion_t'.
Return 'isc_result_t' type value instead of 'bool' to indicate
the actual failure. Rename the function to something not suggesting
a boolean type result. Make changes in the places where the API
function is being used to check for the result code instead of
a boolean value.
Add a test case for a server that uses a resolver as an parental-agent.
We need two root servers, ns1 and ns10, one that delegates to the
'checkds' tld with the DS published (ns2), and one that delegates to
the 'checkds' tld with the DS removed (ns5). Both root zones are
being setup in the 'ns1/setup.sh' script.
We also need two resolvers, ns3 and ns8, that use different root hints
(one uses ns1 address as a hint, the other uses ns10).
Then add the checks to test_checkds.py is similar to the existing tests.
Update 'types' because for zones that have the DS withdrawn (or to be
withdrawn), the CDS and CDNSKEY records should not be published and
thus should not be in the NSEC bitmap.
Mark Andrews
Tony Finch
Ondřej SurýandOndřej Surý
Petr MenšíkandMark Andrews
Tom Krizek
Evan Hunt
Michał Kępień
Matthijs Mekking
Artem Boldariev