Simply looking for the key ID surrounded by spaces in the tested
dnssec-signzone output file is not a precise enough method of checking
for signatures prepared using a given key ID: it can be tripped up by
cross-algorithm key ID collisions and certain low key IDs (e.g. 60, the
TTL specified in bin/tests/system/dnssec/signer/example.db.in), which
triggers false positives for the "dnssec" system test. Make key ID
extraction precise by using an awk script which operates on specific
fields.
(cherry picked from commit a40c60e4c1)
bin/tests/system/stop.pl only waits for the PID file to be cleaned up
while named cleans up the lock file after the PID file. Thus, the
aforementioned script may consider a named instance to be fully shut
down when in fact it is not.
Fix by also checking whether the lock file exists when determining a
given instance's shutdown status. This change assumes that if a named
instance uses a lock file, it is called "named.lock", and that if an
lwresd instance uses a lock file, it is called "lwresd.lock".
Also rename clean_pid_file() to pid_file_exists(), so that it is called
more appropriately (it does not clean up the PID file itself, it only
returns the server's identifier if its PID file is not yet cleaned up).
(cherry picked from commit c787a539d2)
MR !1141 broke the way stop.pl is invoked when start.pl fails:
- start.pl changes the working directory to $testdir/$server before
attempting to start $server,
- commit 27ee629e6b causes the $testdir
variable in stop.pl to be determined using the $SYSTEMTESTTOP
environment variable, which is set to ".." by all tests.sh scripts,
- commit e227815af5 makes start.pl pass
$test (the test's name) rather than $testdir (the path to the test's
directory) to stop.pl when a given server fails to start.
Thus, when a server is restarted from within a tests.sh script and such
a restart fails, stop.pl attempts to look for the server directory in a
nonexistent location ($testdir/$server/../$test, i.e. $testdir/$test,
instead of $testdir/../$test). Fix the issue by changing the working
directory before stop.pl is invoked in the scenario described above.
(cherry picked from commit 4afad2a047)
On Unix systems, the CYGWIN environment variable is not set at all when
BIND system tests are run. If a named instance crashes on shutdown or
otherwise fails to clean up its pidfile and the CYGWIN environment
variable is not set, stop.pl will print an uninitialized value warning
on standard error. Prevent this by using defined().
(cherry picked from commit 91e5a99b9b)
ifconfig.sh depends on config.guess for platform guessing. It uses it to
choose between ifconfig or ip tools to configure interfaces. If
system-wide automake script is installed and local was not found, use
platform guess. It should work well on mostly any sane platform. Still
prefers local guess, but passes when if cannot find it.
(cherry picked from commit 38301052e1)
In the "gost" system test, the ./NS RRset returned in the response to
ns2's priming query might not yet be validated when ns2 assembles the
response to the ./SOA query. If that happens, the ./NS RRset will not
be placed in the AUTHORITY section of the response to the ./SOA query,
triggering a false positive for the "gost" system test as the ./NS RRset
is always present in the response sent by ns1 (since it is authoritative
for the root zone). As the purpose of the "gost" system test is to
check whether a zone signed using GOST is properly validated and only
positive responses are inspected, use the +noauth dig option for all
queries in that test, so that the contents of the AUTHORITY section do
not influence its outcome.
When a zone is converted from NSEC to NSEC3, the private record at zone
apex indicating that NSEC3 chain creation is in progress may be removed
during a different (later) zone_nsec3chain() call than the one which
adds the NSEC3PARAM record. The "delzsk.example" zone check only waits
for the NSEC3PARAM record to start appearing in dig output while private
records at zone apex directly affect "rndc signing -list" output. This
may trigger false positives for the "autosign" system test as the output
of the "rndc signing -list" command used for checking ZSK deletion
progress may contain extra lines which are not accounted for. Ensure
the private record is removed from zone apex before triggering ZSK
deletion in the aforementioned check.
Also future-proof the ZSK deletion progress check by making it only look
at lines it should care about.
(cherry picked from commit e02de04e97)
For checks querying a named instance with "dnssec-accept-expired yes;"
set, authoritative responses have a TTL of 300 seconds. Assuming empty
resolver cache, TTLs of RRsets in the ANSWER section of the first
response to a given query will always match their authoritative
counterparts. Also note that for a DNSSEC-validating named resolver,
validated RRsets replace any existing non-validated RRsets with the same
owner name and type, e.g. cached from responses received while resolving
CD=1 queries. Since TTL capping happens before a validated RRset is
inserted into the cache and RRSIG expiry time does not impose an upper
TTL bound when "dnssec-accept-expired yes;" is set and, as pointed out
above, the original TTLs of the relevant RRsets equal 300 seconds, the
RRsets in the ANSWER section of the responses to expiring.example/SOA
and expired.example/SOA queries sent with CD=0 should always be exactly
120 seconds, never a lower value. Make the relevant TTL checks stricter
to reflect that.
(cherry picked from commit a85cc41486)
Always expecting a TTL of exactly 300 seconds for RRsets found in the
ADDITIONAL section of responses received for CD=1 queries sent during
TTL capping checks is too strict since these responses will contain
records cached from multiple DNS messages received during the resolution
process.
In responses to queries sent with CD=1, ns.expiring.example/A in the
ADDITIONAL section will come from a delegation returned by ns2 while the
ANSWER section will come from an authoritative answer returned by ns3.
If the queries to ns2 and ns3 happen at different Unix timestamps,
RRsets cached from the older response will have a different TTL by the
time they are returned to dig, triggering a false positive.
Allow a safety margin of 60 seconds for checks inspecting the ADDITIONAL
section of responses to queries sent with CD=1 to fix the issue. A
safety margin this large is likely overkill, but it is used nevertheless
for consistency with similar safety margins used in other TTL capping
checks.
(cherry picked from commit 8baf859063)
Changes introduced by commit 6b8e4d6e69
were incomplete as not all time-sensitive checks were updated to match
revised "nta-lifetime" and "nta-recheck" values. Prevent rare false
positives by updating all NTA-related checks so that they work reliably
with "nta-lifetime 12s;" and "nta-recheck 9s;". Update comments as well
to prevent confusion.
(cherry picked from commit 9a36a1bba3)
During "dlv" system test setup, the "sed" regex used for mangling the
DNSKEY RRset for the "druz" zone does not include the plus sign ("+"),
which may:
- cause the replacement to happen near the end of DNSKEY RDATA, which
can cause the latter to become an invalid Base64 string,
- prevent the replacement from being performed altogether.
Both cases prevent the "dlv" system test from behaving as intended and
may trigger false positives. Add the missing character to the
aforementioned regex to ensure the replacement is always performed on
bytes 10-25 of DNSKEY RDATA.
(cherry picked from commit fd13fef299)
The "check key refreshes are resumed after root servers become
available" check may trigger a false positive for the "mkeys" system
test if the second example/TXT query sent by dig is received by ns5 less
than a second after it receives a REFUSED response to the upstream query
it sends to ns1 in order to resolve the first example/TXT query sent by
dig. Since that REFUSED response from ns1 causes ns5 to return a
SERVFAIL answer to dig, example/TXT is added to the SERVFAIL cache,
which is enabled by default with a TTL of 1 second. This in turn may
cause ns5 to return a cached SERVFAIL response to the second example/TXT
query sent by dig, i.e. make ns5 not perform full query processing as
expected by the check.
Since the primary purpose of the check in question is to ensure that key
refreshes are resumed once initially unavailable root servers become
available, the optimal solution appears to be disabling SERVFAIL cache
for ns5 as doing that still allows the check to fulfill its purpose and
it is arguably more prudent than always sleeping for 1 second.
(cherry picked from commit 7c6bff3c4e)
For consistency between all system tests, add missing setup.sh scripts
for tests which do not have one yet and ensure every setup.sh script
calls its respective clean.sh script.
(cherry picked from commit e410803919)
Temporary files created by a given system test should be removed by its
clean.sh script, not its setup.sh script. Remove redundant "rm"
invocations from setup.sh scripts. Move required "rm" invocations from
setup.sh scripts to their corresponding clean.sh scripts.
(cherry picked from commit c64ed484c8)
If dots are not escaped in the "1.2.3.4" regular expressions used for
checking whether IP address 1.2.3.4 is present in the tested resolver's
answers, a COOKIE that matches such a regular expression will trigger a
false positive for the "resolver" system test. Properly escape dots in
the aforementioned regular expressions to prevent that from happening.
(cherry picked from commit 70ae48e5cb)
For all system tests utilizing named instances, call clean.sh from each
test's setup.sh script in a consistent way to make sure running the same
system test multiple times using run.sh does not trigger false positives
caused by stale files created by previous runs.
Ideally we would just call clean.sh from run.sh, but that would break
some quirky system tests like "rpz" or "rpzrecurse" and being consistent
for the time being does not hurt.
(cherry picked from commit a077a3ae8a)
These tests check if a key with an unsupported algorithm in
managed-keys is ignored and when seeing an algorithm rollover to
an unsupported algorithm, the new key will be ignored too.
(cherry picked from commit 144cb53d0ae3aa5e6e3123720b603f9ab2bd1fa9)
- dig command had the @ parameter in the wrong place
- private-dnskey and private-cdnskey are queried in a separate
loop, which strips 'private-' from the name to determine the qtype
(cherry picked from commit bc7b34d6ef)
the occluded-key test creates both a KEY and a DNSKEY. the second
call to dnssec-keygen calls dns_dnssec_findmatchingkeys(), which causes
a spurious warning to be printed when it sees the type KEY record.
this should be fixed in dnssec.c, but the meantime this change silences
the warning by reversing the order in which the keys are created.
(cherry picked from commit 6661db9564)
this prevents servers that use arguments specified in named.args
from appearing different in 'ps' output from servers run with arguments
from start.pl
(cherry picked from commit 175d6e9bfb)
Michał Kępień
Matthijs Mekking
Mark AndrewsandEvan Hunt
Petr MenšíkandMark Andrews
Curtis BlackburnandEvan Hunt
Tony FinchandEvan Hunt
Ondřej SurýandMark Andrews