Contrary to what the documentation states, the "server-addresses"
static-stub zone option does not accept custom port numbers. Fix the
configuration type used by the "server-addresses" option to ensure
documentation matches source code. Remove a check_zoneconf() test which
is unnecessary with this fix in place.
(cherry picked from commit b324576858)
Commonly used network configuration tools write scoped IPv6 nameserver
addresses to /etc/resolv.conf. libirs only handles these when it is
compiled with -DIRS_HAVE_SIN6_SCOPE_ID, which is not the default, and
only handles numeric scopes, which is not what network configuration
tools typically use. This causes dig to be practically unable to handle
scoped IPv6 nameserver addresses in /etc/resolv.conf.
Fix the problem by:
- not requiring a custom compile-time flag to be set in order for
scoped IPv6 addresses to be processed by getaddrinfo(),
- parsing non-numeric scope identifiers using if_nametoindex(),
- setting the sin6_scope_id field in struct sockaddr_in6 structures
returned by getaddrinfo() even if the AI_CANONNAME flag is not set.
(cherry picked from commit 76d49c05be)
Commit 2bc4c92ed4 causes the resolver to
respond to a client query with FORMERR when all upstream queries sent to
the servers authoritative for QNAME elicit FORMERR responses. This
happens because resolver code returns DNS_R_FORMERR in such a case and
dns_result_torcode() acts as a pass-through for all arguments which are
already a valid RCODE.
The correct RCODE to set in the response returned to the client in the
case described above is SERVFAIL. Make sure this happens by overriding
the RCODE in query_gotanswer(), on the grounds that any format errors in
the client query itself should be caught long before execution reaches
that point. This change should not reduce query error logging accuracy
as the resolver code itself reports the exact reason for returning a
DNS_R_FORMERR result using log_formerr().
(cherry picked from commit b5c9a8caad)
* Add configure option --enable-fips-mode that detects and enables FIPS mode
* Add a function to enable FIPS mode and call it on crypto init
* Log an OpenSSL error when FIPS_mode_set() fails and exit
* Report FIPS mode status in a separate log message from named
(cherry picked from commit c4cee27f9b)
In some cases, setting qctx->result to DNS_R_SERVFAIL causes the value
of a 'result' variable containing a more specific failure reason to be
effectively discarded. This may cause certain query error log messages
to lack specificity despite a more accurate problem cause being
determined during query processing.
In other cases, qctx->result is set to DNS_R_SERVFAIL even though a more
specific error (e.g. ISC_R_NOMEMORY) could be explicitly indicated.
Since the response message's RCODE is derived from qctx->result using
dns_result_torcode(), which handles a number of possible isc_result_t
values and returns SERVFAIL for anything not explicitly listed, it is
fine to set qctx->result to something more specific than DNS_R_SERVFAIL
(in fact, this is already being done in a few cases). Modify most
QUERY_ERROR() calls so that qctx->result is set to a more specific error
code when possible. Adjust query_error() so that statistics are still
calculated properly. Remove the RECURSE_ERROR() macro which was
introduced exactly because qctx->result could be set to DNS_R_SERVFAIL
instead of DNS_R_DUPLICATE or DNS_R_DROP, which need special handling.
Modify dns_sdlz_putrr() so that it returns DNS_R_SERVFAIL when a DLZ
driver returns invalid RDATA, in order to prevent setting RCODE to
FORMERR (which is what dns_result_torcode() translates e.g. DNS_R_SYNTAX
to) while responding authoritatively.
(cherry picked from commit ba91243542)
When something goes wrong while recursing for an answer to a query,
query_gotanswer() sets a flag (qctx->want_stale) in the query context.
query_done() is subsequently called and it can either set up a stale
response lookup (if serve-stale is enabled) or conclude that a SERVFAIL
response should be sent. This may cause confusion when looking at query
error logs since the QUERY_ERROR() line responsible for setting the
response's RCODE to SERVFAIL is not in a catch-all branch of a switch
statement inside query_gotanswer() (like it is for authoritative
responses) but rather in a code branch which appears to have something
to do with serve-stale, even when the latter is not enabled.
Extract the part of query_done() responsible for checking serve-stale
configuration and optionally setting up a stale response lookup into a
separate function, query_usestale(), shifting the responsibility for
setting the response's RCODE to SERVFAIL to the same QUERY_ERROR() line
in query_gotanswer() which is evaluated for authoritative responses.
(cherry picked from commit cb48d410d8)
- update_log() is called to log update errors, but if those errors
occur before the zone is set (for example, when returning NOTAUTH)
it returns without logging anything.
(cherry picked from commit 395f6a1474)
The race condition is the timer elapses before isc__timer_create()
returns the pointer to the caller. Assigning the return pointer before
enabling the timer will fix it.
(cherry picked from commit 21966423cd)
Zone loading happens in a different task (zone->loadtask) than other
zone actions (zone->task). Thus, when zone_postload() is called in the
context of zone->loadtask, it may cause zone maintenance to be queued in
zone->task and another thread can then execute zone_maintenance() before
zone_postload() gets a chance to finish its work in the first thread.
This would not be a problem if zone_maintenance() accounted for this
possibility by locking the zone before checking the state of its
DNS_ZONEFLG_LOADPENDING flag. However, the zone is currently not locked
before the state of that flag is checked, which may prevent zone
maintenance from happening despite zone_postload() scheduling it. Fix
by locking the zone in zone_maintenance() before checking the state of
the zone's DNS_ZONEFLG_LOADPENDING flag.
(cherry picked from commit 56003e9f9f)
While "rndc reload" causes dns_zone_asyncload() to be called for the
signed version of an inline-signed zone, the subsequent zone_load() call
causes the raw version to be reloaded from storage. This means that
DNS_ZONEFLG_LOADPENDING gets set for the signed version of the zone by
dns_zone_asyncload() before the reload is attempted, but zone_postload()
is only called for the raw version and thus DNS_ZONEFLG_LOADPENDING is
cleared for the raw version, but not for the signed version. This in
turn prevents zone maintenance from happening for the signed version of
the zone.
Until commit 7c64547d95, this problem
remained dormant because DNS_ZONEFLG_LOADPENDING was previously
immediately, unconditionally cleared after zone loading was started
(whereas it should only be cleared when zone loading is finished or an
error occurs). This behavior caused other issues [1] and thus had to be
changed.
Fix reloading inline-signed zones by clearing DNS_ZONEFLG_LOADPENDING
for the signed version of the zone once the raw version reload
completes. Take care not to clear it prematurely during initial zone
load. Also make sure that DNS_ZONEFLG_LOADPENDING gets cleared when
zone_postload() encounters an error or returns early, to prevent other
scenarios from resulting in the same problem. Add comments aiming to
help explain code flow.
[1] see RT #47076
(cherry picked from commit 5431583971)
When an inline-signed zone is loaded, the master file for its signed
version is loaded and then a rollforward of the journal for the signed
version of the zone is performed. If DNS_JOURNALOPT_RESIGN is not set
during the latter phase, signatures loaded from the journal for the
signed version of the zone will not be scheduled for refresh. Fix the
conditional expression determining which flags should be used for the
dns_journal_rollforward() call so that DNS_JOURNALOPT_RESIGN is set when
zone_postload() is called for the signed version of an inline-signed
zone.
Extend bin/tests/system/stop.pl so that it can use "rndc halt" instead
of "rndc stop" as the former allows master file flushing upon shutdown
to be suppressed.
(cherry picked from commit 8db550c42f)
As part of resquery_response() refactoring [1], a goto statement was
replaced [2] with a call to a new function - originally called
rctx_delegation(), now folded into rctx_answer_none() - extracted from
existing code. However, one call site of that refactored function does
not reset the "result" variable, causing a referral with a non-empty
ANSWER section to be inadvertently treated as an error, which prevents
resolution of names reliant on servers sending such responses. Fix by
resetting the "result" variable to ISC_R_SUCCESS when a response
containing a non-empty ANSWER section can be treated as a delegation.
[1] see RT #45362
[2] see commit e1380a16741a3b4a57e54d7a9ce09dd12691522f
(cherry picked from commit 24b9ec555a)
Mark Andrews
Evan Hunt
Michał Kępień
Witold KręcickiandMichał Kępień
Ondřej Surý
Tony FinchandEvan Hunt
Thomas JachandEvan Hunt
Tinderbox User
Zhaolong ZhangandEvan Hunt