Checks that malformed _dns SVCB records are rejected unless
check-svcb is set to no, in which case they are accepted. Both
missing ALPN and missing DOHPATH are checked for.
_dns SVBC records have additional constrains which should be checked
when records are being added. This adds those constraint checks but
allows the user to override them using 'check-svcb no'.
Add a new upforwd system test that checks if update forwarding still
works if the first primary is badly configured.
We cannot reuse the 'example.' zone for this test because that
checks if update forwarding works for DoT. What transport is used
in the new test is of no relevance.
Update the system test to use different known good file names for
the different zones that are being tested.
Use the ALGORITHM_SET option to use randomly selected default algorithm
in this test. Make sure the test works by using variables instead of
hard-coding values.
Use the get_algorithms.py script to detect supported algorithms and
select random algorithms to use for the tests.
Make sure to load common.conf.sh after KEYGEN env var is exported.
Multiple algorithm sets can be defined in this script. These can be
selected via the ALGORITHM_SET environment variable. For compatibility
reasons, "stable" set contains the currently used algorithms, since our
system tests need some changes before being compatible with randomly
selected algorithms.
The script operation is similar to the get_ports.py - environment
variables are created and then printed out as `export NAME=VALUE`
commands, to be interpreted by shell. Once we support pytest runner for
system tests, this should be a fixture instead.
Certain variables have to be exported in order for the system tests to
work. It makes little sense to export the variables in one place/script
while they're defined in another place.
Since it makes no harm, export all the variables to make the behaviour
more predictable and consistent. Previously, some variables were
exported as environment variables, while others were just shell
variables which could be used once the configuration was sourced from
another script. However, they wouldn't be exposed to spawned processes.
For simplicity sake (and for the upcoming effort to run system tests
with pytest), export all variables that are used. TESTS, PARALLEL_UNIX
and SUBDIRS variables are automake-specific, aren't used anywhere else
and thus not exported.
The only variable really needed for the script to work is the path to
the $KEYGEN binary. Allow setting this via an environment variable to
avoid loading conf.sh (and causing a chicken-egg problem). Also make
testcrypto.sh executable to allow its use from conf.sh.
There are three levels there for the port value, with increasing
priority:
1. The default ports, defined by 'port' and 'tls-port' config options.
2. The primaries-level default port: primaries port <number> { ... };
3. The primaries element-level port: primaries { <address> port
<number>; ... };"
In 'named_config_getipandkeylist()', the 'def_port' and 'def_tlsport'
variables are extracted from level 1. The 'port' variable is extracted
from the level 2. Currently if that is unset, it defaults to the
default port ('def_port' or 'def_tlsport' depending on the transport
used), but overrides the level 2 port setting for the next primaries in
the list.
Update the code such that we inherit the port only if the level 3 port
is not set, and inherit from the default ports if the level 2 port is
also not set.
Add a test case that if the first primary fails, the fallback of a
second primary on plain DNS works. This is mainly to test that the port
configuration inheritance works correctly.
Add a couple of tests that verify the serve-stale behavior when
stale-answer-client-timeout is set to 0 and a (stale) CNAME record is
queried.
Related #3517
The "prefetch" setting is in "defaultconf" so it cannot fail, use
INSIST to confirm that.
The 'trigger' and 'eligible' variables are now prefixed with
'prefetch_' and their declaration moved to an upper level, because
there is no more additional code block after this change.
The test triggers a prefetch, but fails to check if it acutally
happened, which prevented it from catching a bug when the record's
TTL value matches the configured prefetch eligibility value.
Check that prefetch happened by comparing the TTL values.
This commit fixes a startup issue on Solaris systems with
many (reportedly > 510) CPUs by bumping RLIMIT_NOFILE. This appears to
be a regression from 9.11.
For tests where the TCP connection might get interrupted abruptly,
replace the nc with curl as the data sent from server to client might
get lost because of abrupt TCP connection. This happens when the TCP
connection gets closed during sending the large request to the server.
As we already require curl for other system tests, replace the nc usage
in the statschannel test with curl that actually understands the
HTTP/1.1 protocol, so the same connection is reused for sending the
consequtive requests, but without client-side "pipelining".
For the record, the server doesn't support parallel processing of the
pipelined request, so it's a bit misnomer here, because what we are
actually testing is that we process all requests received in a single
TCP read callback.
The 5 seconds requirement to finish the 'pipelined with truncated
stream' was causing spurious failures in the CI because the job runners
might be very busy and sending 128k of data might simply take some time.
Remove the time requirement altogether, there's actually no reason why
the test SHOULD or even MUST finish under 5 seconds.
Correctly source conf.sh in dupsigs test scripts (fix issue introduced
by 093af1c00a).
Update dupsigs test for dnssec-dnskey-kskonly default. Since v9.17.20,
the dnssec-dnskey-kskonly is set to yes. Update the test to not expect
the additional RRSIG with ZSK for DNSKEY.
Speed up the test from 20 minutes to 2.5 minutes and make it part of the
default test suite executed in CI.
- decrease number of records to sign from 2000 to 500
- decrease the signing interval by a factor of 6
- shorten the final part of the test after last signing (since nothing
new happens there)
Finally, clarify misleading comments about (in)sufficient time for zone
re-signing. The time used in the test is in fact sufficient for the
re-signing to happen. If it wasn't, the previous ZSK would end up being
deleted while its signatures would still be present, which is a
situation where duplicate signatures can still happen.
Ensure the port numbers are dynamically filled in with copy_setports.
Clarify test fail condition.
Make the stress test part of the default test suite since it doesn't
seem to run too long or interfere with other tests any more (the
original note claiming so is more than 20 years old).
Related !6883
Properly template the port number in config files with copy_setports.
The test takes two minutes on my machine which doesn't seem like a
proper justification to exclude it from the test suite, especially
considering we run these tests in parallel nowadays. The resource usage
doesn't seems significantly increased so it shouldn't interfere with
other system tests.
There also exists a precedent for longer running system tests that are
already part of the default system test suite (e.g. serve-stale takes
almost three minutes on the same machine).
When a target server is unreachable, the varying network conditions may
cause different ICMP message (or no message). The host unreachable
message was discovered when attempting to run the test locally while
connected to a VPN network which handles all traffic.
Extend the dig output check with "host unreachable" message to avoid a
false negative test result in certain network environments.
Add a test ensuring that the amount of work fctx_getaddresses() performs
for any encountered delegation is limited: delegate example.net to a set
of 1,000 name servers in the redirect.com zone, the names of which all
resolve to IP addresses that nothing listens on, and query for a name in
the example.net domain, checking the number of times the findname()
function gets executed in the process; fail if that count is excessively
large.
Since the size of the referral response sent by ans3 is about 20 kB, it
cannot be sent back over UDP (EMSGSIZE) on some operating systems in
their default configuration (e.g. FreeBSD - see the
net.inet.udp.maxdgram sysctl). To enable reliable reproduction of
CVE-2022-2795 (retry patterns vary across BIND 9 versions) and avoid
false positives at the same time (thread scheduling - and therefore the
number of fetch context restarts - vary across operating systems and
across test runs), extend bin/tests/system/resolver/ans3/ans.pl so that
it also listens on TCP and make "ns1" in the "resolver" system test
always use TCP when communicating with "ans3".
Also add a test (foo.bar.sub.tld1/TXT) that ensures the new limitations
imposed on the resolution process by the mitigation for CVE-2022-2795 do
not prevent valid, glueless delegation chains from working properly.
add a test to compare the Content-Length of successive compressed
messages on a single HTTP connection that should contain the same
data; fail if the size grows by more than 100 bytes from one query
to the next.
I.e. print the name of the function in BIND that called the system
function that returned an error. Since it was useful for pthreads
code, it seems worthwhile doing so everywhere.
Mostly generated automatically with the following semantic patch,
except where coccinelle was confused by #ifdef in lib/isc/net.c
@@ expression list args; @@
- UNEXPECTED_ERROR(__FILE__, __LINE__, args)
+ UNEXPECTED_ERROR(args)
@@ expression list args; @@
- FATAL_ERROR(__FILE__, __LINE__, args)
+ FATAL_ERROR(args)
All we need for compression is a very small hash set of compression
offsets, because most of the information we need (the previously added
names) can be found in the message using the compression offsets.
This change combines dns_compress_find() and dns_compress_add() into
one function dns_compress_name() that both finds any existing suffix,
and adds any new prefix to the table. The old split led to performance
problems caused by duplicate names in the compression context.
Compression contexts are now either small or large, which the caller
chooses depending on the expected size of the message. There is no
dynamic resizing.
There is a behaviour change: compression now acts on all the labels in
each name, instead of just the last few.
A small benchmark suggests this is about 2x faster.
Replace all uses of RUNTIME_CHECK() in lib/isc/include/isc/once.h with
PTHEADS_RUNTIME_CHECK(), in order to improve error reporting for any
once-related run-time failures (by augmenting error messages with
file/line/caller information and the error string corresponding to
errno).
There are multiple reasons to remove this test as obsolete:
- The test may not possibly work for over 2.5 years, since
98b3b93791 removed the rndc.py python
tool on which this test relies.
- It isn't part of the test suite either in CI or locally unless it is
explicitly enabled. As a result, there are many issues which prevent
the test from being executed caused by various refactoring efforts
accumulated over time.
- Even if the test could be executed, it has no clear failure condition.
If the python script(s) fail, the test still passes.
Now that the artificial limit on the recv buffer has been removed, the
current system test always fails because it tests if the truncation has
happened.
Add test that sending more than 10 headers makes the connection to
closed; and add test that sending huge HTTP request makes the connection
to be closed.
Rewrite the isc_httpd to be more robust.
1. Replace the hand-crafted HTTP request parser with picohttpparser for
parsing the whole HTTP/1.0 and HTTP/1.1 requests. Limit the number
of allowed headers to 10 (arbitrary number).
2. Replace the hand-crafted URL parser with isc_url_parse for parsing
the URL from the HTTP request.
3. Increase the receive buffer to match the isc_netmgr buffers, so we
can at least receive two full isc_nm_read()s. This makes the
truncation processing much simpler.
4. Process the received buffer from single isc_nm_read() in a single
loop and schedule the sends to be independent of each other.
The first two changes makes the code simpler and rely on already
existing libraries that we already had (isc_url based on nodejs) or are
used elsewhere (picohttpparser).
The second two changes remove the artificial "truncation" limit on
parsing multiple request. Now only a request that has too many
headers (currently 10) or is too big (so, the receive buffer fills up
without reaching end of the request) will end the connection.
We can be benevolent here with the limites, because the statschannel
channel is by definition private and access must be allowed only to
administrators of the server. There are no timers, no rate-limiting, no
upper limit on the number of requests that can be served, etc.
sizeof(dns_name_t) did not change but the boolean attributes are now
separated as one-bit structure members. This allows debuggers to
pretty-print dns_name_t attributes without any special hacks, plus we
got rid of manual bit manipulation code.
Sometimes doth test could intermittently fail shortly after start due
to inability to complete a zone transfer in time. As it turned out, it
could happen due to transfers-in/out limits. Initially the defaults
were fine, but over time, especially when adding Strict/Mutual TLS, we
added more than 10 zones so it became possible to hit the limits.
This commit takes care of that by bumping the limits.
This commit reduces the size of HTTP listener quota from 300 (default)
to 100 so that it would make hitting any global limits in case of
running multiple tests in parallel in multiple containers unlikely.
This way the need in opening many file descriptors of different
kinds (e.g. client side connections and pipes) gets significantly
reduced while the required code paths are still verified.
The bin/tests/system/start.pl script waits until a "running" message is
logged by a given name server instance before attempting to send a
version.bind/CH/TXT query to it. The idea behind this was to make the
script wait until named loads all the zones it is configured to serve
before telling the system test framework that a given server is ready to
use; this prevents the need to add boilerplate code that waits for a
specific zone to be loaded to each test expecting that.
The problem is that when it looks for "running" messages, the
bin/tests/system/start.pl script assumes that the existence of any such
message in the named.run file indicates that a given named instance has
already finished loading all zones. Meanwhile, some system tests
restart all the named instances they use throughout their lifetime (some
even do that a few times), for example to run Python-based tests. The
bin/tests/system/start.pl script handles such a scenario incorrectly: as
soon as it finds any "running" message in the named.run file it inspects
and it gets a response to a version.bind/CH/TXT query, it tells the
system test framework that a given server is ready to use, which might
not be true - it is possible that only the "version.bind" zone is loaded
at that point and the "running" message found was logged by a
previously-shutdown named instance. This triggers intermittent failures
for Python-based tests.
Fix by improving the logic that the bin/tests/system/start.pl script
uses to detect server startup: check how many "running" lines are
present in a given named.run file before attempting to start a named
instance and only proceed with version.bind/CH/TXT queries when the
number of "running" lines found in that named.run file increases after
the server is started.
In the "rrsetorder" system test, the ns2 named instance is restarted
without passing the --restart option to bin/tests/system/start.pl. This
causes the log file for that named instance to be needlessly truncated.
Prevent this from happening by restarting the affected named instance
in the same way as all the other named instances used in system tests.
Getting the recorded value of 'edns-udp-size' from the resolver requires
strong attach to the dns_view because we are accessing `view->resolver`.
This is not the case in places (f.e. dns_zone unit) where `.udpsize` is
accessed. By moving the .udpsize field from `struct dns_resolver` to
`struct dns_view`, we can access the value directly even with weakly
attached dns_view without the need to lock the view because `.udpsize`
can be accessed after the dns_view object has been shut down.
