With taskmgr running on top of netmgr, the ordering of how the tasks and
netmgr shutdown interacts was wrong as previously isc_taskmgr_destroy()
was waiting until all tasks were properly shutdown and detached. This
responsibility was moved to netmgr, so we now need to do the following:
1. shutdown all the tasks - this schedules all shutdown events onto
the netmgr queue
2. shutdown the netmgr - this also makes sure all the tasks and
events are properly executed
3. Shutdown the taskmgr - this now waits for all the tasks to finish
running before returning
4. Shutdown the netmgr - this call waits for all the netmgr netievents
to finish before returning
This solves the race when the taskmgr object would be destroyed before
all the tasks were finished running in the netmgr loops.
Previously, netmgr, taskmgr, timermgr and socketmgr all had their own
isc_<*>mgr_create() and isc_<*>mgr_destroy() functions. The new
isc_managers_create() and isc_managers_destroy() fold all four into a
single function and makes sure the objects are created and destroy in
correct order.
Especially now, when taskmgr runs on top of netmgr, the correct order is
important and when the code was duplicated at many places it's easy to
make mistake.
The former isc_<*>mgr_create() and isc_<*>mgr_destroy() functions were
made private and a single call to isc_managers_create() and
isc_managers_destroy() is required at the program startup / shutdown.
When looking for key files, we could use isdigit rather than checking
if the character is within the range [0-9].
Use (unsigned char) cast to ensure the value is representable in the
unsigned char type (as suggested by the isdigit manpage).
Change " & 0xff" occurrences to the recommended (unsigned char) type
cast.
When we introduced "dnssec-policy insecure" we could have removed the
'strcmp' check for "none", because if it was set to "none", the 'kasp'
variable would have been set to NULL.
BIND 9 is smart about when to sign with what key. If a key is offline,
BIND will delete the old signature anyway if there is another key to
sign the RRset with.
With KASP we don't want to fallback to the KSK if the ZSK is missing,
only for the SOA RRset. If the KSK is missing, but we do have a ZSK,
deleting the signature is fine. Otherwise it depends on if we use KASP
or not. Update the 'delsig_ok' function to reflect that.
When checking the current DNSSEC state against the policy, consider
offline keys. If we didn't found an active key, check if the key is
offline by checking the public key list. If there is a match in the
public key list (the key data is retrieved from the .key and the
.state files), treat the key as offline and don't create a successor
key for it.
The function 'dns_dnssec_keylistfromrdataset()' creates a keylist from
the DNSKEY RRset. If we attempt to read the private key, we also store
the key state. However, if the private key is offline, the key state
will not be stored. To fix this, first attempt to read the public key
file. If then reading the private key file fails, and we do have a
public key, add that to the keylist, with appropriate state. If we
also failed to read the public key file, add the DNSKEY to the keylist,
as we did before.
Add a new built-in policy "insecure", to be used to gracefully unsign
a zone. Previously you could just remove the 'dnssec-policy'
configuration from your zone statement, or remove it.
The built-in policy "none" (or not configured) now actually means
no DNSSEC maintenance for the corresponding zone. So if you
immediately reconfigure your zone from whatever policy to "none",
your zone will temporarily be seen as bogus by validating resolvers.
This means we can remove the functions 'dns_zone_use_kasp()' and
'dns_zone_secure_to_insecure()' again. We also no longer have to
check for the existence of key state files to figure out if a zone
is transitioning to insecure.
* The location of the digest type field has changed to where the
reserved field was.
* The reserved field is now called scheme and is where the digest
type field was.
* Digest type 2 has been defined (SHA256).
If a zone transfer results in a zone not having any NS records, named
stops serving it because such a zone is broken. Do the same if an
incoming zone transfer results in a zone lacking an SOA record at the
apex or containing more than one SOA record.
An IXFR containing SOA records with owner names different than the
transferred zone's origin can result in named serving a version of that
zone without an SOA record at the apex. This causes a RUNTIME_CHECK
assertion failure the next time such a zone is refreshed. Fix by
immediately rejecting a zone transfer (either an incremental or
non-incremental one) upon detecting an SOA record not placed at the apex
of the transferred zone.
If there happens to be a RRSIG(SOA) that is not at the zone apex
for any reason it should not be considered as a stopping condition
for incremental zone signing.
When the keymgr needs to create new keys, it is possible it needs to
create multiple keys. The keymgr checks for keyid conflicts with
already existing keys, but it should also check against that it just
created.
This commit changes the taskmgr to run the individual tasks on the
netmgr internal workers. While an effort has been put into keeping the
taskmgr interface intact, couple of changes have been made:
* The taskmgr has no concept of universal privileged mode - rather the
tasks are either privileged or unprivileged (normal). The privileged
tasks are run as a first thing when the netmgr is unpaused. There
are now four different queues in in the netmgr:
1. priority queue - netievent on the priority queue are run even when
the taskmgr enter exclusive mode and netmgr is paused. This is
needed to properly start listening on the interfaces, free
resources and resume.
2. privileged task queue - only privileged tasks are queued here and
this is the first queue that gets processed when network manager
is unpaused using isc_nm_resume(). All netmgr workers need to
clean the privileged task queue before they all proceed normal
operation. Both task queues are processed when the workers are
finished.
3. task queue - only (traditional) task are scheduled here and this
queue along with privileged task queues are process when the
netmgr workers are finishing. This is needed to process the task
shutdown events.
4. normal queue - this is the queue with netmgr events, e.g. reading,
sending, callbacks and pretty much everything is processed here.
* The isc_taskmgr_create() now requires initialized netmgr (isc_nm_t)
object.
* The isc_nm_destroy() function now waits for indefinite time, but it
will print out the active objects when in tracing mode
(-DNETMGR_TRACE=1 and -DNETMGR_TRACE_VERBOSE=1), the netmgr has been
made a little bit more asynchronous and it might take longer time to
shutdown all the active networking connections.
* Previously, the isc_nm_stoplistening() was a synchronous operation.
This has been changed and the isc_nm_stoplistening() just schedules
the child sockets to stop listening and exits. This was needed to
prevent a deadlock as the the (traditional) tasks are now executed on
the netmgr threads.
* The socket selection logic in isc__nm_udp_send() was flawed, but
fortunatelly, it was broken, so we never hit the problem where we
created uvreq_t on a socket from nmhandle_t, but then a different
socket could be picked up and then we were trying to run the send
callback on a socket that had different threadid than currently
running.
When we are reading from the xfrin socket, and the transfer would be
shutdown, the shutdown function would call `xfrin_fail()` which in turns
calls `xfrin_cancelio()` that causes the read callback to be invoked
with `ISC_R_CANCELED` status code and that caused yet another
`xfrin_fail()` call.
The fix here is to ensure the `xfrin_fail()` would be run only once
properly using better synchronization on xfr->shuttingdown flag.
When setnsec3param() is schedule from zone_postload() there's no
guarantee that `zone->db` is not `NULL` yet. Thus when the
setnsec3param() is called, we need to check for `zone->db` existence and
reschedule the task, because calling `rss_post()` on a zone with empty
`.db` ends up with no-op (the function just returns).
the libdns client API is no longer being maintained for
external use, we can remove the code that isn't being used
internally, as well as the related tests.
Too much logic was cramped inside the dns_journal_rollforward() that
made it harder to follow. The dns_journal_rollforward() was refactored
to work over already opened journal and some of the previous logic was
moved to new static zone_journal_rollforward() that separates the
journal "rollforward" logic from the "zone" logic.
when dns_journal_rollforward returned ISC_R_RECOVERABLE the distintion
between 'up to date' and 'success' was lost, as a consequence
zone_needdump() was called writing out the zone file when it shouldn't
have been. This change restores that distintion. Adjust system
test to reflect visible changes.
The draft says that the NSEC(3) TTL must have the same TTL value
as the minimum of the SOA MINIMUM field and the SOA TTL. This was
always the intended behaviour.
Update the zone structure to also track the SOA TTL. Whenever we
use the MINIMUM value to determine the NSEC(3) TTL, use the minimum
of MINIMUM and SOA TTL instead.
There is no specific test for this, however two tests need adjusting
because otherwise they failed: They were testing for NSEC3 records
including the TTL. Update these checks to use 600 (the SOA TTL),
rather than 3600 (the SOA MINIMUM).
It is more intuitive to have the countdown 'max-stale-ttl' as the
RRset TTL, instead of 0 TTL. This information was already available
in a comment "; stale (will be retained for x more seconds", but
Support suggested to put it in the TTL field instead.
Before binding an RRset, check the time and see if this record is
stale (or perhaps even ancient). Marking a header stale or ancient
happens only when looking up an RRset in cache, but binding an RRset
can also happen on other occasions (for example when dumping the
database).
Check the time and compare it to the header. If according to the
time the entry is stale, but not ancient, set the STALE attribute.
If according to the time is ancient, set the ANCIENT attribute.
We could mark the header stale or ancient here, but that requires
locking, so that's why we only compare the current time against
the rdh_ttl.
Adjust the test to check the dump-db before querying for data. In the
dumped file the entry should be marked as stale, despite no cache
lookup happened since the initial query.
When introducing change 5149, "rndc dumpdb" started to print a line
above a stale RRset, indicating how long the data will be retained.
At that time, I thought it should also be possible to load
a cache from file. But if a TTL has a value of 0 (because it is stale),
stale entries wouldn't be loaded from file. So, I added the
'max-stale-ttl' to TTL values, and adjusted the $DATE accordingly.
Since we actually don't have a "load cache from file" feature, this
is premature and is causing confusion at operators. This commit
changes the 'max-stale-ttl' adjustments.
A check in the serve-stale system test is added for a non-stale
RRset (longttl.example) to make sure the TTL in cache is sensible.
Also, the comment above stale RRsets could have nonsensical
values. A possible reason why this may happen is when the RRset was
marked a stale but the 'max-stale-ttl' has passed (and is actually an
RRset awaiting cleanup). This would lead to the "will be retained"
value to be negative (but since it is stored in an uint32_t, you would
get a nonsensical value (e.g. 4294362497).
To mitigate against this, we now also check if the header is not
ancient. In addition we check if the stale_ttl would be negative, and
if so we set it to 0. Most likely this will not happen because the
header would already have been marked ancient, but there is a possible
race condition where the 'rdh_ttl + serve_stale_ttl' has passed,
but the header has not been checked for staleness.
Even if a call to gss_accept_sec_context() fails, it might still cause a
GSS-API response token to be allocated and left for the caller to
release. Make sure the token is released before an early return from
dst_gssapi_acceptctx().
Previously, dns_journal_begin_transaction() could reserve the wrong
amount of space. We now check that the transaction is internally
consistent when upgrading / downgrading a journal and we also handle the
bad transaction headers.
Instead of journal_write(), use correct format call journal_write_xhdr()
to write the dummy transaction header which looks at j->header_ver1 to
determine which transaction header to write instead of always writing a
zero filled journal_rawxhdr_t header.
The isc_nm_*connect() functions were refactored to always return the
connection status via the connect callback instead of sometimes returning
the hard failure directly (for example, when the socket could not be
created, or when the network manager was shutting down).
This commit changes the connect functions in all the network manager
modules, and also makes the necessary refactoring changes in places
where the connect functions are called.
Fix race between zone_maintenance and dns_zone_notifyreceive functions,
zone_maintenance was attempting to read a zone flag calling
DNS_ZONE_FLAG(zone, flag) while dns_zone_notifyreceive was updating
a flag in the same zone calling DNS_ZONE_SETFLAG(zone, ...).
The code reading the flag in zone_maintenance was not protected by the
zone's lock, to avoid a race the zone's lock is now being acquired
before an attempt to read the zone flag is made.
The dboption DNS_DBFIND_STALEONLY caused confusion because it implies
we are looking for stale data **only** and ignore any active RRsets in
the cache. Rename it to DNS_DBFIND_STALETIMEOUT as it is more clear
the option is related to a lookup due to "stale-answer-client-timeout".
Rename other usages of "staleonly", instead use "lookup due to...".
Also rename related function and variable names.
When implementing "stale-answer-client-timeout", we decided that
we should only return positive answers prematurely to clients. A
negative response is not useful, and in that case it is better to
wait for the recursion to complete.
To do so, we check the result and if it is not ISC_R_SUCCESS, we
decide that it is not good enough. However, there are more return
codes that could lead to a positive answer (e.g. CNAME chains).
This commit removes the exception and now uses the same logic that
other stale lookups use to determine if we found a useful stale
answer (stale_found == true).
This means we can simplify two test cases in the serve-stale system
test: nodata.example is no longer treated differently than data.example.
The NS_QUERYATTR_ANSWERED attribute is to prevent sending a response
twice. Without the attribute, this may happen if a staleonly lookup
found a useful answer and sends a response to the client, and later
recursion ends and also tries to send a response.
The attribute was also used to mask adding a duplicate RRset. This is
considered harmful. When we created a response to the client with a
stale only lookup (regardless if we actually have send the response),
we should clear the rdatasets that were added during that lookup.
Mark such rdatasets with the a new attribute,
DNS_RDATASETATTR_STALE_ADDED. Set a query attribute
NS_QUERYATTR_STALEOK if we may have added rdatasets during a stale
only lookup. Before creating a response on a normal lookup, check if
we can expect rdatasets to have been added during a staleonly lookup.
If so, clear the rdatasets from the message with the attribute
DNS_RDATASETATTR_STALE_ADDED set.
add matching macros to pass arguments from called methods
to generic methods. This will reduce the amount of work
required when extending methods.
Also cleanup unnecessary UNUSED declarations.
