We were missing a test where a single owner name would have multiple
types with a different case. The generated RRSIGs and NSEC records will
then have different case than the signed records and message parser have
to cope with that and treat everything as the same owner.
(cherry picked from commit c8b623d87f)
In Net::DNS 1.42 $ns->main_loop no longer loops. Use current methods
for starting the server, wait for SIGTERM then cleanup child processes
using $ns->stop_server(), then remove the pid file.
(cherry picked from commit c2c59dea60)
Add a test ensuring that the amount of work fctx_getaddresses() performs
for any encountered delegation is limited: delegate example.net to a set
of 1,000 name servers in the redirect.com zone, the names of which all
resolve to IP addresses that nothing listens on, and query for a name in
the example.net domain, checking the number of times the findname()
function gets executed in the process; fail if that count is excessively
large.
Since the size of the referral response sent by ans3 is about 20 kB, it
cannot be sent back over UDP (EMSGSIZE) on some operating systems in
their default configuration (e.g. FreeBSD - see the
net.inet.udp.maxdgram sysctl). To enable reliable reproduction of
CVE-2022-2795 (retry patterns vary across BIND 9 versions) and avoid
false positives at the same time (thread scheduling - and therefore the
number of fetch context restarts - vary across operating systems and
across test runs), extend bin/tests/system/resolver/ans3/ans.pl so that
it also listens on TCP and make "ns1" in the "resolver" system test
always use TCP when communicating with "ans3".
Also add a test (foo.bar.sub.tld1/TXT) that ensures the new limitations
imposed on the resolution process by the mitigation for CVE-2022-2795 do
not prevent valid, glueless delegation chains from working properly.
- Check that an NS in an authority section returned from a forwarder
which is above the name in a configured "forward first" or "forward
only" zone (i.e., net/NS in a response from a forwarder configured for
local.net) is not cached.
- Test that a DNAME for a parent domain will not be cached when sent
in a response from a forwarder configured to answer for a child.
- Check that glue is rejected if its name falls below that of zone
configured locally.
- Check that an extra out-of-bailiwick data in the answer section is
not cached (this was already working correctly, but was not explicitly
tested before).
- v9_11 backport: Revert primary/secondary to master/slave,
backport rndc helper, backport ns8 config.
(cherry picked from commit bf3fffff67)
Make sure an incoming IXFR containing an SOA record which is not placed
at the apex of the transferred zone does not result in a broken version
of the zone being served by named and/or a subsequent crash.
(cherry picked from commit 5547003a3d)
FreeBSD 13.0 replaced GNU grep with BSD grep and removed support for
"redundant escapes for most ordinary characters" from regex(3) library,
therefore the matching sequence in digdelv/tests.sh needs to be
rewritten otherwise it fails with:
grep: trailing backslash (\)
(cherry picked from commit 253ae96bf1)
When the `named` would hang on startup it would be killed with SIGKILL
leaving us with no information about the state the process was in.
This commit changes the start.pl script to send SIGABRT instead, so we
can properly collect and process the coredump from the hung named
process.
(cherry picked from commit 861a236937)
The nsupdate system test did not record failures from the
'update_test.pl' Perl script. This was because the 'ret' value was
not being saved outside the '{ $PERL ... || ret=1 } cat_i' scope.
Change this piece to store the output in a separate file and then
cat its contents. Now the 'ret' value is being saved.
Also record failures in 'update_test.pl' if sending the update
failed.
Add missing 'n' incrementals to 'nsupdate/test.sh' to keep track of
test numbers.
(cherry picked from commit 5b31811b5f)
* The location of the digest type field has changed to where the
reserved field was.
* The reserved field is now called scheme and is where the digest
type field was.
* Digest type 2 has been defined (SHA256).
(cherry picked from commit 8510ccaa54)
If "tkey-gssapi-credential" is set in the configuration and GSSAPI
support is not available, named will refuse to start. As the test
system framework does not support starting named instances
conditionally, ensure that "tkey-gssapi-credential" is only present in
named.conf if GSSAPI support is available.
(cherry picked from commit 6feac68b50)
Four named instances in the "nsupdate" system test have GSS-TSIG support
enabled. All of them currently use "tkey-gssapi-keytab". Configure two
of them with "tkey-gssapi-credential" to test that option.
As "tkey-gssapi-keytab" and "tkey-gssapi-credential" both provide the
same functionality, no test modifications are required. The difference
between the two options is that the value of "tkey-gssapi-keytab" is an
explicit path to the keytab file to acquire credentials from, while the
value of "tkey-gssapi-credential" is the name of the principal whose
credentials should be used; those credentials are looked up in the
keytab file expected by the Kerberos library, i.e. /etc/krb5.keytab by
default. The path to the default keytab file can be overridden using by
setting the KRB5_KTNAME environment variable. Utilize that variable to
use existing keytab files with the "tkey-gssapi-credential" option.
The KRB5_KTNAME environment variable should not interfere with the
"tkey-gssapi-keytab" option. Nevertheless, rename one of the keytab
files used with "tkey-gssapi-keytab" to something else than the contents
of the KRB5_KTNAME environment variable in order to make sure that both
"tkey-gssapi-keytab" and "tkey-gssapi-credential" are actually tested.
(cherry picked from commit 1746d2e84a)
When the authsock.pl script would be terminated with a signal,
it would leave the pidfile around. This commit adds a signal
handler that cleanups the pidfile on signals that are expected.
The traceback files could overwrite each other on systems which do not
use different core dump file names for different processes. Prevent
that by writing the traceback file to the same directory as the core
dump file.
These changes still do not prevent the operating system from overwriting
a core dump file if the same binary crashes multiple times in the same
directory and core dump files are named identically for different
processes.
(cherry picked from commit 6428fc26af)
ans10 simulates a local anycast server which has both signed and
unsigned instances of a zone. 'A' queries get answered from the
signed instance. Everything else gets answered from the unsigned
instance. The resulting answer should be insecure.
(cherry picked from commit d7840f4b93)
"tcp-only" was not being tested correctly in the RPZ system test
because the option to the "digcmd" function that causes queries to
be sent via TCP was misspelled in one case, and was being interpreted
as a query name.
the "ckresult" function has also been changed to be case sensitive
for consistency with "digcmd".
(cherry picked from commit 78af071c11)
On Linux core dump contains absolute path to crashed binary
Core was generated by `/home/newman/isc/ws/bind9/bin/named/.libs/lt-named -D glue-ns1 -X named.lock -m'.
However, on OpenBSD there's only a basename
Core was generated by `named'.
This commit adds support for the latter, retains the former.
(cherry picked from commit f0b13873a3)
(cherry picked from commit 659feff963)
This test is very simple, two nameserver instances are created:
- ns4: master, with 'minimal-responses yes', authoritative
for example. zone
- ns5: slave, stub zone
The first thing verified is the transfer of zone data from master
to slave, which should be saved in ns5/example.db.
After that, a query is issued to ns5 asking for target.example.
TXT, a record present in the master database with the "test" string
as content.
If that query works, it means stub zone successfully request
nameserver addresses from master, ns4.example. A/AAAA
The presence of both A/AAAA records for ns4 is also verified in the
stub zone local file, ns5/example.db.
This commit ensures that dnstap output files captured
by fstrm_capture are properly flushed before any attempt
on reading them with dnstap-read is done.
By reading fstrm-capture source code it was noticed that
signal SIGHUP is used to flush the capture file.
Add a +burst option to mdig so that we have a second to setup the
mdig calls then they run at the start of the next second.
RRL uses 'queries in a second' as a approximation to
'queries per second'. Getting the bursts of traffic to all happen in
the same second should prevent false negatives in the system test.
We now have a second to setup the traffic in. Then the traffic should
be sent at the start of the next second. If that still fails we
should move to +burst=<now+2> (further extend mdig) instead of the
implicit <now+1> as the trigger second.
(cherry picked from commit 92cdc7b6c7)
* digdelv test was just expecting default server EDNS buffer size to be
4096, the test needed only slight adjustment
(cherry picked from commit f1556f8c41)
(cherry picked from commit 6b303721f1ee472dc8ab2d1df03191a98d4e4e5e)