previously, a managed-keys zone was created for every view
regardless of whether rfc5011 was in use; when it was not in
use, the zone would be left empty. this made for some confusing
log messages.
we now only set up the managed-keys zone if dnssec-validation is
set to the default value of "auto".
certain system test servers have had their dnssec-validation settings
changed to auto because the tests depended on the existence of the
zone.
Previously, tasks could be created either unbound or bound to a specific
thread (worker loop). The unbound tasks would be assigned to a random
thread every time isc_task_send() was called. Because there's no logic
that would assign the task to the least busy worker, this just creates
unpredictability. Instead of random assignment, bind all the previously
unbound tasks to worker 0, which is guaranteed to exist.
This commit disables periodic interface re-scans timer on Linux where
a kernel-based dynamic interface mechanisms make it a thing of the
past in most cases.
Since the fctx hash table is now self-resizing, and resolver tasks are
selected to match the thread that created the fetch context, there
shouldn't be any significant advantage to having multiple tasks per CPU;
a single task per thread should be sufficient.
Additionally, the fetch context is always pinned to the calling netmgr
thread to minimize the contention just to coalesced fetches - if two
threads starts the same fetch, it will be pinned to the first one to get
the bucket.
for better object separation, ADB and resolver statistics counters
are now stored in the ADB and resolver objects themsevles, rather than
in the associated view.
- eliminate dns_view_flushanddetach(), which was only called from
one place; instead, we now call a function dns_view_flushonshutdown()
which sets the view up to flush zones when it is detached normally
with dns_view_detach().
- cleaned up code in dns_view_create().
The isc_task_onshutdown() was used to post event that should be run when
the task is being shutdown. This could happen explicitly in the
isc_test_shutdown() call or implicitly when we detach the last reference
to the task and there are no more events posted on the task.
This whole task onshutdown mechanism just makes things more complicated,
and it's easier to post the "shutdown" events when we are shutting down
explicitly and the existing code already always knows when it should
shutdown the task that's being used to execute the onshutdown events.
Replace the isc_task_onshutdown() calls with explicit calls to execute
the shutdown tasks.
The named_config_getdefault() was missing void in the function
definition. This broke clang-15 that didn't match the declaration that
had the void in the argument with the definition that hadn't.
As we are going to use libuv outside of the netmgr, we need the shims to
be readily available for the rest of the codebase.
Move the "netmgr/uv-compat.h" to <isc/uv.h> and netmgr/uv-compat.c to
uv.c, and as a rule of thumb, the users of libuv should include
<isc/uv.h> instead of <uv.h> directly.
Additionally, merge netmgr/uverr2result.c into uv.c and rename the
single function from isc__nm_uverr2result() to isc_uverr2result().
These checks have been redundant since the `rbtdb64` implementation
was removed in 2018 (commit 784087390a). It isn't possible to create
a zone that uses `database "rbt64"` now that the `rbt64` database
implementation has been removed, so the checks will always fail.
It might be useful to display built-in configuration with all its
values. It should make it easier to test what default values has changed
in a new release.
Related: #1326
Parser ensures new-zones-directory has qstring parameter before it can
reach this place. dir == NULL then should never happen on any
configuration. Replace silent check with insist.
When parsing the configuration file, log a warning message in
configure_view() function when encountering a `catalog-zones`
option in a view with non-IN rdata class.
For some applications, it's useful to not listen on full battery of
threads. Add workers argument to all isc_nm_listen*() functions and
convenience ISC_NM_LISTEN_ONE and ISC_NM_LISTEN_ALL macros.
Catalog zones change of ownership is special mechanism to facilitate
controlled migration of a member zone from one catalog to another.
It is implemented using catalog zones property named "coo" and is
documented in DNS catalog zones draft version 5 document.
Implement the feature using a new hash table in the catalog zone
structure, which holds the added "coo" properties for the catalog zone
(containing the target catalog zone's name), and the key for the hash
table being the member zone's name for which the "coo" property is being
created.
Change some log messages to have consistent zone name quoting types.
Update the ARM with change of ownership documentation and usage
examples.
Add tests which check newly the added features.
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
Previously, HAVE_SO_REUSEPORT_LB has been defined only in the private
netmgr-int.h header file, making the configuration of load balanced
sockets inoperable.
Move the missing HAVE_SO_REUSEPORT_LB define the isc/netmgr.h and add
missing isc_nm_getloadbalancesockets() implementation.
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
The reference counting and isc_timer_attach()/isc_timer_detach()
semantic are actually misleading because it cannot be used under normal
conditions. The usual conditions under which is timer used uses the
object where timer is used as argument to the "timer" itself. This
means that when the caller is using `isc_timer_detach()` it needs the
timer to stop and the isc_timer_detach() does that only if this would be
the last reference. Unfortunately, this also means that if the timer is
attached elsewhere and the timer is fired it will most likely be
use-after-free, because the object used in the timer no longer exists.
Remove the reference counting from the isc_timer unit, remove
isc_timer_attach() function and rename isc_timer_detach() to
isc_timer_destroy() to better reflect how the API needs to be used.
The only caveat is that the already executed event must be destroyed
before the isc_timer_destroy() is called because the timer is no longet
attached to .ev_destroy_arg.
Previously, the task privileged mode has been used only when the named
was starting up and loading the zones from the disk as the "first" thing
to do. The privileged task was setup with quantum == 2, which made the
taskmgr/netmgr spin around the privileged queue processing two events at
the time.
The same effect can be achieved by setting the quantum to UINT_MAX (e.g.
practically unlimited) for the loadzone task, hence the privileged task
mode was removed in favor of just processing all the events on the
loadzone task in a single task_run().
Instead of passing the number of worker to the dns_zonemgr manually,
get the number of nm threads using the new isc_nm_getnworkers() call.
Additionally, remove the isc_pool API and manage the array of memory
context, zonetasks and loadtasks directly in the zonemgr.
After switching to per-thread resources in the zonemgr, the performance
was decreased because the memory context, zonetask and loadtask was
picked from the pool at random.
Pin the zone to single threadid (.tid) and align the memory context,
zonetask and loadtask to be the same, this sets the hard affinity of the
zone to the netmgr thread.
The zone counting in the named was used to properly size the zonemgr
resources (memory contexts, zonetasks and loadtasks). Since this is no
longer the case, remove the whole zone counting from named.
Previously, the zonemgr created 1 task per 100 zones and 1 memory
context per 1000 zones (with minimum 10 tasks and 2 memory contexts) to
reduce the contention between threads.
Instead of reducing the contention by having many resources, create a
per-nm_thread memory context, loadtask and zonetask and spread the zones
between just per-thread resources.
Note: this commit alone does decrease performance when loading the zone
by couple seconds (in case of 1M zone) and thus there's more work in
this whole MR fixing the performance.
This commit adds support for Strict/Mutual TLS into BIND. It does so
by implementing the backing code for 'hostname' and 'ca-file' options
of the 'tls' statement. The commit also updates the documentation
accordingly.
Because of the "goto" in the "if" body the "else" part is unnecessary
and adds another level of indentation.
Cleanup the code to not have the "else" part.
Catz logs a warning message when it is told to modify a zone which was
not added by the current catalog zone.
When logging a warning, distinguish the two cases when the zone
was not added by a catalog zone at all, and when the zone was
added by a different catalog zone.
Previously, it was possible to assign a bit of memory space in the
nmhandle to store the client data. This was complicated and prevents
further refactoring of isc_nmhandle_t caching (future work).
Instead of caching the data in the nmhandle, allocate the hot-path
ns_client_t objects from per-thread clientmgr memory context and just
assign it to the isc_nmhandle_t via isc_nmhandle_set().
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
C11 has builtin support for _Noreturn function specifier with
convenience noreturn macro defined in <stdnoreturn.h> header.
Replace ISC_NORETURN macro by C11 noreturn with fallback to
__attribute__((noreturn)) if the C11 support is not complete.
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
Instead of passing the "workers" variable back and forth along with
passing the single isc_nm_t instance, add isc_nm_getnworkers() function
that returns the number of netmgr threads are running.
Change the ns_interfacemgr and ns_taskmgr to utilize the newly acquired
knowledge.
Commit 4ca74eee49 update the zone grammar
such that the zone statement is printed with the valid options per
zone type.
This commit is a follow-up, putting back the ZONE heading and adding
a note that these zone statements may also be put inside the view
statement.
It is tricky to actually print the zone statements inside
the view statement, and so we decided that we would add a note to say
that this is possible.
The isc_timer_create() function was a bit conflated. It could have been
used to create a timer and start it at the same time. As there was a
single place where this was done before (see the previous commit for
nta.c), this was cleaned up and the isc_timer_create() function was
changed to only create new timer.
Replace :manpage: with :iscman: to generate internal hyperlinks. That
way reader can use links even when offline, and jumps to man pages
for the same version.
Formerly HTML version of man pages did not have links in See Also
section because :manpage: role in Sphinx can generate only external
hyperlinks - and we do not have that enabled.
Enabling the Sphinx :manpage: linking could reliably create hyperlinks
only to external URLs, but that would take users to another version
of docs.
Generated by:
find bin -name '*.rst' | xargs sed -i -e 's/:manpage:`\([^(]\+\)(\([0-9]\))`/:iscman:`\1(\2) <\1>`/g'
+ hand-edit to revert change for mmencode reference which is
not provided in our source tree.
Use the new role :iscman: to replace all occurences or ``binary``
with :iscman:`binary`, creating a hyperlink to the manual page.
Generated using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. iscman' | xargs -I{} -n1 basename {} .rst > /tmp/progs
for PROG in $(cat /tmp/progs); do find -name '*.rst' | xargs sed -i -e "s/\`\`$PROG\`\`/:iscman:\`$PROG\`/g"; done
Additional hand-edits were done mainly around filter-aaaa and
filter-a which are program names and and option names at the
same time. Couple more edits was neede to fix .rst syntax broken by
automatic replacement.
Sphinx has it's own :program: syntax for refering to program names.
Use it for self-references in manual pages. These self-references are
not clickable and not as eye-cathing as links, which is a good thing.
There is no point in attracting attention to ``dig`` several times on a
single page dedicated to dig itself.
Substituted automatically using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. program' | xargs -n1 bash /tmp/repl.sh
With /tmp/repl.sh being:
BASE=$(basename "$1" .rst)
sed -i -e "s/\`\`$BASE\`\`/:program:\`$BASE\`/g" "$1"
The new directive and role "iscman" allow to tag & reference man pages in
our source tree. Essentially it is just namespacing for ISC man pages,
but it comes with couple benefits.
Differences from .. _man_program label we formerly used:
- Does not expand :ref:`man_program` into full text of the page header.
- Generates index entry with category "manual page".
- Rendering style is closer to ubiquitous to the one produced
by ``named`` syntax.
Differences from Sphinx built-in :manpage: role:
- Supports all builders with support for cross-references.
- Generates internal links (unlike :manpage: which generates external
URLs).
- Checks that target exists withing our source tree.
Side-effect of hyperlinking is that typos in program and option names
are now detected by Sphinx.
Candidate -options were detected using:
find -name *.rst | xargs grep '``-[^`]'
and then modified from ``-o`` to :option:`-o` using regex
s/``\(-[^`]\+\)``/:option:`\1`/
+ manual modifications where necessary.
Non-hyphenated options were detected by looking at context around
program names:
find bin -name *.rst | xargs -I{} -n1 basename {} .rst | sort -u
and grepping for program name with trailing whitespace.
Stand-alone program names like ``named`` are not hyperlinked in this
commit.
The markup allows referencing individual options, and also makes them
more legible (no more thin red text on gray background).
Most of the work was done using regexes:
s/^``-\(.*\)``$/.. option:: -\1\r/
s/^``+\(.*\)``$/.. option:: +\1\r/
on bin/**/*.rst files along with visual inspection and hand-edits,
mostly for positional arguments.
Regex for rndc.rst:
s/^``\(.*\)``/.. option:: \1\r/
+ hand edits to remove extra asterisk and whitespace here and there.
Previously, the function(s) in the commit subject could fail for various
reasons - mostly allocation failures, or other functions returning
different return code than ISC_R_SUCCESS. Now, the aforementioned
function(s) cannot ever fail and they would always return ISC_R_SUCCESS.
Change the function(s) to return void and remove the extra checks in
the code that uses them.
