In some cases, the numeric identifier doesn't correspond to the
directory name (i.e. `resolver` server in `shutdown` test, which is
supposed to be 10.53.0.3). These are typically servers that shouldn't be
auto-started by the runner, thus avoiding the typical `*ns<X>` name.
Support these server by allowing a fallback initialization with custom
numeric identifier in case it can't be parsed from the directory name.
The start()/stop() functions can be used in the pytests in the same way
as start_server and stop_server functions were used in shell tests. Note
that the servers obtained through the servers fixture are still started
and stopped by the test runner at the start and end of the test. This
makes these functions mostly useful for restarting the server(s)
mid-test.
Previously, these functions have been provided as fixtures. This was
limiting re-use, because it wasn't possible to call these outside of
tests / other fixtures without passing these utility functions around.
Move them into isctest.run package instead.
The ANS servers were not to written to handle NS queries at the
QNAME resulting in gratuitious protocol errors that will break tests
when NS requests are made for the QNAME.
In #1870, the expiration time of ANCIENT records were printed, but
actually the ancient records are very short lived, and the information
carries a little value.
Instead of printing the expiration of ANCIENT records, print the
expiration time of STALE records.
When the header has been marked as ANCIENT, but the ttl hasn't been
reset (this happens in couple of places), the rdataset TTL would be
set to the header timestamp instead to a reasonable TTL value.
Since this header has been already expired (ANCIENT is set), set the
rdataset TTL to 0 and don't reuse this field to print the expiration
time when dumping the cache. Instead of printing the time, we now
just print 'expired (awaiting cleanup'.
Named was failing to recover when spoofed nameserver address from
a signed zone for a peer zone were returned to a previous CD=1
query. Validate non-glue interior server addresses before using them.
the search for the deepest known zone cut in the cache could
improperly reject a node containing stale data, even if the
NS rdataset wasn't the data that was stale.
this change also improves the efficiency of the search by
stopping it when both NS and RRSIG(NS) have been found.
Changes !9948 introducing the support of extended DNS error code 1 and 2
uses SHA-1 digest for some tests which break FIPS platform. The digest
itself was irrelevant, another digest is used.
When EDE 3 (stale answer) was added the serve-stale tests were checking
for those exclusively, i.e. grepping for no "EDE" in the dig output when
no stale answer was expected.
However, some stale tests disable stale answers and make the
authoritative server unresponsive, effectively triggering a timed out
request thus an EDE 22. Update those tests so they still tests the
absence of EDE 3 error, but also the presence of EDE 22.
This re-do a previously existing EDE 22 system test as well as add
another one making sure the timed out flow detection works also on UDP
when the resolver is contacting the authoritative server. (the existing
test was using TCP to contact the authoritative servers).
A DNSSEC validation can fail in the case where multiple DNSKEY are
available for a zone and none of them are supported, but for different
reasons: one has a DS record in the parent zone using an unsupported
digest while the other one uses an unsupported encryption algorithm.
Add a specific test case covering this flow and making sure that two
extended DNS error are provided: code 1 and 2, each of them highlighting
unsupported algorithm and digest.
The servers are setup and torn down once per each test module. All the
logs and server state persists between individual tests within the same
module. The servers fixture representing these servers should be
module-wide as well.
When explicitly set to True, the "verify" argument lets dnspython verify
certificates used for the connection. As most certificates in the system
test will inevitably be self-signed, the "verify" argument defaults to
False.
The "verify" argument is present in dnspython since the version 2.5.0.
the isc_mem allocation functions can no longer fail; as a result,
ISC_R_NOMEMORY is now rarely used: only when an external library
such as libjson-c or libfstrm could return NULL. (even in
these cases, arguably we should assert rather than returning
ISC_R_NOMEMORY.)
code and comments that mentioned ISC_R_NOMEMORY have been
cleaned up, and the following functions have been changed to
type void, since (in most cases) the only value they could
return was ISC_R_SUCCESS:
- dns_dns64_create()
- dns_dyndb_create()
- dns_ipkeylist_resize()
- dns_kasp_create()
- dns_kasp_key_create()
- dns_keystore_create()
- dns_order_create()
- dns_order_add()
- dns_peerlist_new()
- dns_tkeyctx_create()
- dns_view_create()
- dns_zone_setorigin()
- dns_zone_setfile()
- dns_zone_setstream()
- dns_zone_getdbtype()
- dns_zone_setjournal()
- dns_zone_setkeydirectory()
- isc_lex_openstream()
- isc_portset_create()
- isc_symtab_create()
(the exception is dns_view_create(), which could have returned
other error codes in the event of a crypto library failure when
calling isc_file_sanitize(), but that should be a RUNTIME_CHECK
anyway.)
Track inside the dns_dnsseckey structure whether we have seen the
private key, or if this key only has a public key file.
If the key only has a public key file, or a DNSKEY reference in the
zone, mark the key 'pubkey'. In dnssec-signzone, if the key only
has a public key available, consider the key to be offline. Any
signatures that should be refreshed for which the key is not available,
retain the signature.
So in the code, 'expired' becomes 'refresh', and the new 'expired'
is only used to determine whether we need to keep the signature if
the corresponding key is not available (retaining the signature if
it is not expired).
In the 'keysthatsigned' function, we can remove:
- key->force_publish = false;
- key->force_sign = false;
because they are redundant ('dns_dnsseckey_create' already sets these
values to false).
Add a test case for the scenario below.
There is a case when signing a zone with dnssec-signzone where the
private key file is moved outside the key directory (for offline
ksk purposes), and then the zone is resigned. The signature of the
DNSKEY needs refreshing, but is not expired.
Rather than removing the signature without having a valid replacement,
leave the signature in the zone (despite it needs to be refreshed).
Since the read timeout now works, the resolver time outs from the
dispatch level instead of from the "hung fetch" timer, and so the
EDE value in 'fctx_expired()' is not being set. Remove the expected
EDE value from the test.
The network manager layer has two different timers with their
own timeout values for TCP connections: connect timeout and read
timeout. Separate the connect and the read TCP timeouts in the
dispatch module too.
Instead of running the whole resolver/ns4 server with -T noaa flag,
use it only for the part where it is actually needed. The -T noaa
could interfere with other parts of the test because the answers don't
have the authoritative-answer bit set, and we could have false
positives (or false negatives) in the test because the authoritative
server doesn't follow the DNS protocol for all the tests in the resolver
system test.
this test adds a record with empty non-terminal nodes above it. this
has also been observed to trigger the crash in NSEC3 zones.
NOTE: the test currently fails, because while there is no crash, the
query results are not as expected. when we add a node below an ENT,
receive_secure_serial() gets DNS_R_PARTIALMATCH, and the signed
zone is never updated. this is not a regression from fixing the
crash bug; it's a separate inline-signing bug.
test that there's no crash when querying for a newly-deleted node.
(incidentally also renamed ns3/named.conf.in to ns3/named1.conf.in,
because named2.conf.in does exist, and they should match.)
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
The terminating conditions for the startup notify test would
occasionally get ~20 records or get +10 seconds of records due to
a bad terminating condition. Additionally 20 samples lead to test
failures. Fix the terminating condition to use the correct conditional
(-eq -> -ge) and increase the minimum number of log entries to
average over to 40.
After the rndc reload command finished, we might have queried the
database zone sooner than it was reloaded because rndc reloads zones
asynchronously if no specific zone was provided. We should wait for "all
zones loaded" in the ns1 log to be sure.
this commit removes the deprecated "sortlist" option. the option
is now marked as ancient; it is a fatal error to use it in
named.conf.
the sortlist system test has been removed, and other tests that
referenced the option have been modified.
the enabling functions, dns_message_setsortorder() and
dns_rdataset_towiresorted(), have also been removed.
This checks that "zone has A records but is not served by IPv4
servers" and "zone has AAAA records but is not served by IPv6
servers" are emitted when they should be and not when they shouldn't
be.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature. There are no
reasons to keep this feature in the production code anymore.
Remove the feature to simplify the code.
when the attach-cache option is used in the options block
with an arbitrary name, it causes all views to use the same
cache. however, previously, this could cause the cache to be
deleted and a new cache created every time the server was
reconfigured. this did *not* occur when attach-cache was
used at the view level to refer back to another view's cache.
in this commit we correct the problem by checking for
pre-existing caches during reconfiguration, and moving
them from the old server cache list to the new cache list
before cleaning up and freeing the old cache list.
