If the dnskey-ttl in the dnssec-policy doesn't match the DNSKEY's
ttl then the DNSKEY, CDNSKEY and CDS rrset should be updated by
named to reflect the expressed policy. Check that named does this
by creating a zone with a TTL that does not match the policy's TTL
and check that it is correctly updated.
(cherry picked from commit f894bf661f)
This is a followup for !8063, which backported !7999. The configuration
file layout for these files have changed (main branch has
named-fips.conf), which is probably why these bits were missed during a
backport.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
(manually replayed commit 4cb8b13987)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
(cherry picked from commit 168dba163c)
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
(manually picked from commit 05baf7206b)
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
(cherry picked from commit 01bc805f89)
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
(cherry picked from commit 0b09ee8cdc)
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
(cherry picked from commit 2f5bf6d971)
(manually added host/tests_sh_host.py, tkey/tests_sh_tkey.py on top)
If the zone already has existing NSEC/NSEC3 chains then zone_sign
needs to continue to use them. If there are no chains then use
kasp setting otherwise generate an NSEC chain.
(cherry picked from commit 4b55201459)
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
(cherry picked from commit c100308b7d)
Similar to an attempt to add NSEC through dynamic update, add a test
case that tries to add NSEC3 through zone transfer.
(cherry picked from commit ef1cb9935c)
Add one more case that tests reconfiguring a zone to turn off
inline-signing. It should still be a valid DNSSEC zone and the NSEC3
parameters should not change.
Add another test to ensure that you cannot update the zone with a
NSEC3 record.
(cherry picked from commit 4cd8e8e9c3)
Add a kasp system test that reconfigures a dnssec-policy zone from
maintaining DNSSEC records directly to the zone to using inline-signing.
Add a similar test case to the nsec3 system test, testing the same
thing but now with NSEC3 in use.
(cherry picked from commit 9018fbb205)
The wait_for_zone_is_signed function was never called, which could lead
to test failures due to timing issues (where a zone was not fully signed
yet, but the test was trying to verify the zone).
Also add two missing set_nsec3param calls to ensure the ITERATIONS
value is set for these test cases.
(cherry picked from commit 08505651d1d9278314f61076ac7cd119a7790428)
Add two scenarios where we change the dnssec-policy from using RSASHA1
to something with NSEC3.
The first case should work, as the DS is still in hidden state and we
can basically do anything with DNSSEC.
The second case should fail, because the DS of the predecessor is
published and we can't immediately remove the predecessor DNSKEY. So
in this case we should keep the NSEC chain for a bit longer.
Add two more scenarios where we change the dnssec-policy from using
NSEC3 to something NSEC only. Both should work because there are no
restrictions on using NSEC when it comes to algorithms, but in the
cases where the DS is published we can't bluntly remove the predecessor.
Extend the nsec3 system test by also checking the DNSKEY RRset for the
expected DNSKEY records. This requires some "kasp system"-style setup
for each test (setting key properties and key states). Also move the
dnssec-verify check inside the check_nsec/check_nsec3 functions because
we will have to do that every time.
(cherry picked from commit 21729dd94efc9fc7b7317688dd9ff0ec45181bfd)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Update the nsec3 system tests to use the new default values. Change
the policy for "nsec3-other" so that we still have a test case for
non-zero salt length.
When performing the 'setnsec3param' task, zones that are not loaded will have
their task rescheduled. We should do this only if the zone load is still
pending, this prevents zones that failed to load get stuck in a busy wait and
causing a hang on shutdown.
Add a zone to the configuration file that uses NSEC3 with dnssec-policy
and fails to load. This will cause setnsec3param to go into a busy wait
and will cause a hang on shutdown.
Add a test case where 'named' is restarted and ensure that an already
signed zone does not change its NSEC3 parameters.
The test case first tests the current zone and saves the used salt
value. Then after restart it checks if the salt (and other parameters)
are the same as before the restart.
This test case changes 'set_nsec3param'. This will now reset the salt
value, and when checking for NSEC3PARAM we will store the salt and
use it when testing the NXDOMAIN response. This does mean that for
every test case we now have to call 'set_nsec3param' explicitly (and
can not omit it because it is the same as the previous zone).
Finally, slightly changed some echo output to make debugging friendlier.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
Implement support for NSEC3 in dnssec-policy. Store the configuration
in kasp objects. When configuring a zone, call 'dns_zone_setnsec3param'
to queue an nsec3param event. This will ensure that any previous
chains will be removed and a chain according to the dnssec-policy is
created.
Add tests for dnssec-policy zones that uses the new 'nsec3param'
option, as well as changing to new values, changing to NSEC, and
changing from NSEC.
